Age | Commit message (Expand) | Author |
2009-05-10 | simple images to set revision number | matt |
2009-04-27 | somebody commented out the tx mux setting which prevented the xcvr2450 from w... | matt |
2009-04-04 | Merged r10712:10765 from jcorgan/gpio into trunk. Adds out-of-band and strea... | jcorgan |
2009-04-02 | new regs for re-pause fix | matt |
2009-03-26 | Partial fix for ticket:378. Merged eb/t378 -r10682:10688 to trunk. | eb |
2009-03-18 | Fixed ticket:339 (ethernet capability advertisement). We now | eb |
2009-03-10 | Bumped up minimum divider to 131 for xcvr. | jblum |
2009-03-05 | New standalone firmware, burn_dbsrx_eeprom, that burns new dbid into | eb |
2009-03-03 | Actually enable/disable tx via gpio (...when tx enable is supported). | jblum |
2009-02-26 | remove support for unmodified dbsrx because there is way too much phase noise... | matt |
2009-02-23 | support for unmodified dbsrx boards | matt |
2009-02-17 | minor renaming | eb |
2009-02-17 | Use defined bit positions | jcorgan |
2009-02-10 | Merged r10418:10423 from jcorgan/pps into trunk. Adds usrp2::sync_every_pps | jcorgan |
2009-02-04 | Merged r10383:10390 from jcorgan/u2-wip into trunk. | jcorgan |
2009-02-04 | usrp2-xcvr cleanup, working gains, freqs | jblum |
2009-02-04 | usrp2: xcvr working | jblum |
2009-02-03 | work in progress: xcvr running, needs work with divisors | matt |
2009-02-02 | work in progress: setting gpio on xcvr | jblum |
2009-01-31 | debug info | matt |
2009-01-31 | minor rev increase for for 3.01, which was just pcb cosmetic changes | matt |
2009-01-31 | work with the set reg functions | jblum |
2009-01-30 | xcvr: initialize chipset | jblum |
2009-01-30 | converted set freq in xcvr | jblum |
2009-01-30 | work on xcvr set_freq | jblum |
2009-01-30 | xcvr dboard support | jblum |
2009-01-29 | tunes the dbsrx properly. You need to mod your dbsrx, though. | matt |
2009-01-28 | dbsrx daughterboard support, gain works, not freq | matt |
2009-01-27 | third time's a charm... | eb |
2009-01-27 | added missing .h files | eb |
2009-01-27 | Merged eb/u2-mimo-wip -r10297:10317 into the trunk. This contains | eb |
2009-01-27 | General housekeeping--removing ancient cruft mostly. | jcorgan |
2009-01-23 | mimo tx work-in-progress | eb |
2009-01-23 | revert extraction of buffer_state | eb |
2009-01-23 | Work in progress on mimo Tx state machine. | eb |
2009-01-22 | bumped stack to 3k (not sure we needed to), cleaned up old serdes test | eb |
2008-12-31 | Fix USRP2 peek32() max words | jcorgan |
2008-12-31 | Rename constant for clarity | jcorgan |
2008-12-29 | Implements USRP2 poke32() command. | jcorgan |
2008-12-27 | Implements USRP2 peek() command, allowing arbitrary reads from the internal | jcorgan |
2008-12-17 | added frequency offset capability. Set to 12.5e6 on TX, 0 on RX for now | matt |
2008-12-14 | add break at end of new case to prevent fallthru. Also cleared up a warning. | matt |
2008-12-14 | Fix failure with interp > 128 | jcorgan |
2008-12-14 | Implement sync_to_pps command for USRP2 | jcorgan |
2008-12-07 | split test out into a function | matt |
2008-12-07 | more tests, for ram and sd card | matt |
2008-12-05 | implemented "reset master clock on next PPS" so we can easily sync multiple u... | matt |
2008-12-05 | send a char to the serial port, but don't wait if the queue is full | matt |
2008-11-16 | removed old python comments | matt |
2008-11-16 | fixed gain calculations rfx900-2400 | matt |