diff options
Diffstat (limited to '806')
113 files changed, 0 insertions, 833 deletions
diff --git a/806/CH1/EX1.1/11.sce b/806/CH1/EX1.1/11.sce deleted file mode 100644 index 00e0f8766..000000000 --- a/806/CH1/EX1.1/11.sce +++ /dev/null @@ -1,14 +0,0 @@ -clc
-pathname=get_absolute_file_path('11.sce')
-filename=pathname+filesep()+'11.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\11.txt')
-disp("a liquid has a viscosity of 0.005kg/m.s and density of 850kg/cm^3,calculate the kinematic viscosity in (a)SI units (b)USC units and (c)viscosity in USC units")
-disp("Solution:")
-v=u/p//kinematic viscosity
-V=v*(1/.3048)^2//kinematic viscosity in USC units
-U=u/47.9//viscosity in USC units
-disp("m^2/s",v,"Kinematic viscosity in SI units=")
-disp("ft^2/s",V,"Kinematic viscosity in USC units=")
-disp("slug/ft.s",U,"viscosity in USC units")
-diary(0)
\ No newline at end of file diff --git a/806/CH1/EX1.1/11.txt b/806/CH1/EX1.1/11.txt deleted file mode 100644 index 978fca8ef..000000000 --- a/806/CH1/EX1.1/11.txt +++ /dev/null @@ -1,22 +0,0 @@ -
- a liquid has a viscosity of 0.005kg/m.s and density of 850kg/cm^3,calculate the kinematic viscosity in (a)SI units (b)USC units and (c)viscosity in USC units
-
- Solution:
-
- Kinematic viscosity in SI units=
-
- 0.0000059
-
- m^2/s
-
- Kinematic viscosity in USC units=
-
- 0.0000633
-
- ft^2/s
-
- viscosity in USC units
-
- 0.0001044
-
- slug/ft.s
diff --git a/806/CH1/EX1.2/12.sce b/806/CH1/EX1.2/12.sce deleted file mode 100644 index 310088f85..000000000 --- a/806/CH1/EX1.2/12.sce +++ /dev/null @@ -1,12 +0,0 @@ -clc
-pathname=get_absolute_file_path('12.sce')
-filename=pathname+filesep()+'12.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\12.txt')
-disp("A lubricated shaft rotates inside a concentric sleeve bearing at 1200rpm,the clearance is smaal with respect to the radius and hence a linear distribution velocity distribution may be assumed.What are the power requirements to rotate the shaft?R=2cm , L=6cm , dy=0.1mm , and u=0.2N.s/m^2.")
-disp("Solution:")
-t=u*du/dy*2*%pi/60*R*1000/100//shear stress in N/m^2
-T=t*2*%pi*R*L*R/1000000//torque in Nm
-P=T*du*2*%pi/60//Power in Watts
-disp("W",P,"Power required to rotate the shaft =")
-diary(0)
\ No newline at end of file diff --git a/806/CH1/EX1.2/12.txt b/806/CH1/EX1.2/12.txt deleted file mode 100644 index 5a0ff5871..000000000 --- a/806/CH1/EX1.2/12.txt +++ /dev/null @@ -1,11 +0,0 @@ -
- A lubricated shaft rotates inside a concentric sleeve bearing at 1200rpm,the clearance is smaal with respect to the radius and hence a linear distribution velocity
- distribution may be assumed.What are the power requirements to rotate the shaft?R=2cm , L=6cm , dy=0.1mm , and u=0.2N.s/m^2.
-
- Solution:
-
- Power required to rotate the shaft =
-
- 95.251282
-
- W
diff --git a/806/CH1/EX1.3/13.sce b/806/CH1/EX1.3/13.sce deleted file mode 100644 index aab6d30bc..000000000 --- a/806/CH1/EX1.3/13.sce +++ /dev/null @@ -1,10 +0,0 @@ -clc
-pathname=get_absolute_file_path('13.sce')
-filename=pathname+filesep()+'13.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\13.txt')
-disp("a gas with molecular weight of 44 is at a pressure of 0.9MPa and a temperature of 20 degree celsius.Calculate its density")
-R=8312/M//gas constant(in m.N/kg.K)
-p=P/R/(273+T)*10^6//density in kg/m^3
-disp("kg/m^3",p,"Density p=")
-diary(0)
\ No newline at end of file diff --git a/806/CH1/EX1.3/13.txt b/806/CH1/EX1.3/13.txt deleted file mode 100644 index 6a2280ad0..000000000 --- a/806/CH1/EX1.3/13.txt +++ /dev/null @@ -1,8 +0,0 @@ -
- a gas with molecular weight of 44 is at a pressure of 0.9MPa and a temperature of 20 degree celsius.Calculate its density
-
- Density p=
-
- 16.260056
-
- kg/m^3
diff --git a/806/CH1/EX1.4/14.sce b/806/CH1/EX1.4/14.sce deleted file mode 100644 index 791f2a478..000000000 --- a/806/CH1/EX1.4/14.sce +++ /dev/null @@ -1,10 +0,0 @@ -clc
-pathname=get_absolute_file_path('14.sce')
-filename=pathname+filesep()+'14.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\14.txt')
-disp("A liquid compressed in a cylinder has a volume of 1000 cm^3 at 1 MN/m^2 and volume of 995 cm^3 at 2MN/m^2.What is its bulk modulus of elasticity?")
-disp("Solution:")
-K=-(P2-P1)/(V2-V1)*V1//Modulus of elasticity
-disp("MPa",K,"Modulus of elasticity=")
-diary(0)
diff --git a/806/CH1/EX1.4/14.txt b/806/CH1/EX1.4/14.txt deleted file mode 100644 index 856fdbd79..000000000 --- a/806/CH1/EX1.4/14.txt +++ /dev/null @@ -1,14 +0,0 @@ -
- A liquid compressed in a cylinder has a
- volume of 1000 cm^3 at 1 MN/m^2 a
- nd volume of 995 cm^3 at 2MN/m^2.W
- hat is its bulk modulus of elastic
- ity?
-
- Solution:
-
- Modulus of elasticity=
-
- 200.
-
- MPa
diff --git a/806/CH1/EX1.5/15.sce b/806/CH1/EX1.5/15.sce deleted file mode 100644 index d11cd408d..000000000 --- a/806/CH1/EX1.5/15.sce +++ /dev/null @@ -1,12 +0,0 @@ -clc
-pathname=get_absolute_file_path('15.sce')
-filename=pathname+filesep()+'15.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\15.txt')
-disp("With regard to Example 1.4 suppose the cylinder is a water quality sample bottle used to collect water samples at a predetermined depths.At deep Depths the sample Bottle has a smaller volume to collect 995 cm^3 due to compression.Suppose that analysis reveals that 15 mg of sediment are collected.What would be the difference in concerntration data measured shipboard where the pressure is atmospheric versus the in situ depths where the sample was collected?")
-disp("Solution:")
-C1=M/V1//Concerntration of shipboard
-C2=M/V2//concerntration of in situ depth
-disp("mg/cm^3",C1,"Concerntration of shipboard")
-disp("mg/cm^3",C2,"Concerntration of in situ depth")
-diary(0)
diff --git a/806/CH1/EX1.5/15.txt b/806/CH1/EX1.5/15.txt deleted file mode 100644 index c2d88f30b..000000000 --- a/806/CH1/EX1.5/15.txt +++ /dev/null @@ -1,29 +0,0 @@ -
- With regard to Example 1.4 suppose the
- cylinder is a water quality sample
- bottle used to collect water samp
- les at a predetermined depths.At d
- eep Depths the sample Bottle has a
- smaller volume to collect 995 cm^
- 3 due to compression.Suppose that
- analysis reveals that 15 mg of sed
- iment are collected.What would be
- the difference in concerntration d
- ata measured shipboard where the p
- ressure is atmospheric versus the
- in situ depths where the sample wa
- s collected?
-
- Solution:
-
- Concerntration of shipboard
-
- 0.015
-
- mg/cm^3
-
- Concerntration of in situ depth
-
- 0.0150754
-
- mg/cm^3
diff --git a/806/CH10/EX10.1/101.sce b/806/CH10/EX10.1/101.sce deleted file mode 100644 index a47b495c2..000000000 --- a/806/CH10/EX10.1/101.sce +++ /dev/null @@ -1,22 +0,0 @@ -clc
-pathname=get_absolute_file_path('101.sce')
-filename=pathname+filesep()+'101.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\101.txt')
-disp("A 75 mm diameter orific under a head of 4.88 m discharges 8900 N waterin 32.6 s.The trajectory was determined by measuring x=4.76 m for a drop of 1.22.determine the head loss per unit weight,the power loss,Cc,Cv,Cd")
-disp("Solution:")
-Vt=sqrt(2*g*H)//theoretical velocity
-t=sqrt(2*y/g)//actual time
-Va=x/t//actual velocity
-Cv=Va/Vt//coefficient of velocity
-Qa=F/p/T//actual discharge
-Cd=Qa/(%pi*d^2*Vt)*4//coefficient of discharge
-Cc=Cd/Cv//coefficient of contraction
-HL=H*(1-Cv^2)//Head loss
-PL=Qa*p*HL//power loss
-disp(Cd,"Cd=")
-disp(Cv,"Cv=")
-disp(Cc,"Cc=")
-disp("m.N/N",HL,"Head loss=")
-disp("W",PL,"Power loss=")
-diary(0)
\ No newline at end of file diff --git a/806/CH10/EX10.1/101.txt b/806/CH10/EX10.1/101.txt deleted file mode 100644 index b8bb70b76..000000000 --- a/806/CH10/EX10.1/101.txt +++ /dev/null @@ -1,31 +0,0 @@ -
- A 75 mm diameter orific under a head of 4.88 m discharges 8900 N waterin 32.6 s.The trajectory was determined by measuring x=4.76 m for a drop of 1.22.determine t
- he head loss per unit weight,the power loss,Cc,Cv,Cd
-
- Solution:
-
- Cd=
-
- 0.6437713
-
- Cv=
-
- 0.9754098
-
- Cc=
-
- 0.6600008
-
- Head loss=
-
- 0.2370492
-
- m.N/N
-
- Power loss=
-
- 64.715881
-
- W
-
- 0.9754098
diff --git a/806/CH4/EX4.5/45.sce b/806/CH4/EX4.5/45.sce deleted file mode 100644 index e76367382..000000000 --- a/806/CH4/EX4.5/45.sce +++ /dev/null @@ -1,11 +0,0 @@ -clc
-pathname=get_absolute_file_path('45.sce')
-filename=pathname+filesep()+'45.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\45.txt')
-disp("Water is flowing through an open channel at a depth of 2 m and a velocity of 3m/s.it then flows through a contracting chute into another channel where the depth is 1 m and the velocity is 10m/s.assuming frictionless flow,determine the difference in the elevation of the channel floors.")
-disp("Solution:")
-disp("The points 1 and 2 can be selected on the free surface and therefore p1=p2=0")
-disp("Therefore by bernoullis equation the difference in the elevation of the channel is y=")
-y=(v2^2)/(2*p)+h2-h1-(v1^2)/(2*p)
-disp("m",y)
\ No newline at end of file diff --git a/806/CH4/EX4.5/45.txt b/806/CH4/EX4.5/45.txt deleted file mode 100644 index 9717574b8..000000000 --- a/806/CH4/EX4.5/45.txt +++ /dev/null @@ -1,15 +0,0 @@ -
- Water is flowing through an open channel at a depth of 2 m and a velocity of 3m/s.it then flows through a contracting chute into another channel where the depth i
- s 1 m and the velocity is 10m/s.assuming frictionless flow,determine the difference in the elevation of the channel floors.
-
- Solution:
-
- The points 1 and 2 can be selected on the free surface and therefore p1=p2=0
-
- Therefore by bernoullis equation the difference in the elevation of the channel is y=
-
- 3.6381244
-
- m
-
--->exec('SCI/etc/scilab.quit','errcatch',-1);quit;
diff --git a/806/CH4/EX4.6/46.sce b/806/CH4/EX4.6/46.sce deleted file mode 100644 index fc58bb642..000000000 --- a/806/CH4/EX4.6/46.sce +++ /dev/null @@ -1,16 +0,0 @@ -clc
-pathname=get_absolute_file_path('46.sce')
-filename=pathname+filesep()+'46.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\46.txt')
-disp("A venturimeter,consisting of a converging portion followed by a throat of constant diameter and then gradually diverging portion,is used to detremine the flow of the pipe.The diameter at section 1 is 6 in. and that of section 2 is 4 in.,Find the discharge through the pipe when p1-p2=3psi and oil of sp grvty 0.9 is flowing")
-disp("Solution:")
-disp("From the continuity equation Q=A1v1=A2v2")
-disp("Therefore,v1=Q*16/pi , v2=Q*36/pi")
-disp("And moreover Z1=Z2")
-disp("Therefore discharge Q =")
-a1=%pi/16//sq.ft
-a2=%pi/36//sq.ft
-q=sqrt(a*144*(%pi^2)*2*32.185/((s*62.4)*(36^2-16^2)))
-disp("cfs",q)
-diary(0)
\ No newline at end of file diff --git a/806/CH4/EX4.6/46.txt b/806/CH4/EX4.6/46.txt deleted file mode 100644 index 1933f4658..000000000 --- a/806/CH4/EX4.6/46.txt +++ /dev/null @@ -1,18 +0,0 @@ -
- A venturimeter,consisting of a converging portion followed by a throat of constant diameter and then gradually diverging portion,is used to detremine the flow of
- the pipe.The diameter at section 1 is 6 in. and that of section 2 is 4 in.,Find the discharge through the pipe when p1-p2=3psi and oil of sp grvty 0.9 is flo
- wing
-
- Solution:
-
- From the continuity equation Q=A1v1=A2v2
-
- Therefore,v1=Q*16/pi , v2=Q*36/pi
-
- And moreover Z1=Z2
-
- Therefore discharge Q =
-
- 2.1677205
-
- cfs
diff --git a/806/CH4/EX4.7/47.sce b/806/CH4/EX4.7/47.sce deleted file mode 100644 index a665e9b42..000000000 --- a/806/CH4/EX4.7/47.sce +++ /dev/null @@ -1,19 +0,0 @@ -clc
-pathname=get_absolute_file_path('47.sce')
-filename=pathname+filesep()+'47.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\47.txt')
-disp("The water supply reservoir as shown in given figure has an average depth of 20m, a surface area of 20km^2, ans an outlet whose centerline is 15m below the water surface.If the otflow diameter is 1 m, what is the outflow and its associated velocity?What would be the drwa down during one week and one day periods?")
-disp("Solution:")
-V2=sqrt(2*g*z1)//Velocity of liquid from the pipe
-Q=V2*%pi*d2^2/4//Discharge per sec
-disp("m^3/s",Q,"Discharge")
-v1=Q*24*3600//Discharge per day
-v2=Q*7*24*3600//Dicharge per week
-v=A*H//Original volume of liquid
-disp("Hence drop down in level for one day and one week are:")
-h1=v1/v*H//draw down of one day
-h2=v2/v*H//draw down of one week
-disp("m",h1,"draw down of one day")
-disp("m",h2,"draw down of one week")
-diary(0)
diff --git a/806/CH4/EX4.7/47.txt b/806/CH4/EX4.7/47.txt deleted file mode 100644 index 4a8221360..000000000 --- a/806/CH4/EX4.7/47.txt +++ /dev/null @@ -1,34 +0,0 @@ -
- The water supply reservoir as shown in
- given figure has an average depth
- of 20m, a surface area of 20km^2,
- ans an outlet whose centerline is
- 15m below the water surface.If the
- otflow diameter is 1 m, what is t
- he outflow and its associated velo
- city?What would be the drwa down d
- uring one week and one day periods
- ?
-
- Solution:
-
- Discharge
-
- 13.473642
-
- m^3/s
-
- Hence drop down in level for one day an
- d one week are:
-
- draw down of one day
-
- 0.0582061
-
- m
-
- draw down of one week
-
- 0.4074429
-
- m
diff --git a/806/CH7/EX7.1/71.sce b/806/CH7/EX7.1/71.sce deleted file mode 100644 index 0ffc8a9a0..000000000 --- a/806/CH7/EX7.1/71.sce +++ /dev/null @@ -1,15 +0,0 @@ -clc
-pathname=get_absolute_file_path('71.sce')
-filename=pathname+filesep()+'71.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\71.txt')
-disp("A smooth flat plate 3 m wide and 30 m long is towed through still water at 20 degree celsius with a speed of 6m/s.Determine the drag on one side of the plate and the drag on the first 3 m of plate")
-disp("Solution:")
-R=U*l/v//Reynolds number
-Cd=0.455/(log10(R))^2.58//Constant
-D1=Cd*w*l*p*(U^2)/2//Drag force on whole plate
-D2=Cd*w*l1*p*U^2/2//Drag force on first 3 m
-disp("N",D1,"Drag force on whole plate")
-disp("N",D2,"Drag force on first 3m")
-
-diary(0)
diff --git a/806/CH7/EX7.1/71.txt b/806/CH7/EX7.1/71.txt deleted file mode 100644 index 55756a872..000000000 --- a/806/CH7/EX7.1/71.txt +++ /dev/null @@ -1,21 +0,0 @@ -
- A smooth flat plate 3 m wide and 30 m l
- ong is towed through still water a
- t 20 degree celsius with a speed o
- f 6m/s.Determine the drag on one s
- ide of the plate and the drag on t
- he first 3 m of plate
-
- Solution:
-
- Drag force on whole plate
-
- 3176.7877
-
- N
-
- Drag force on first 3m
-
- 317.67877
-
- N
diff --git a/806/CH7/EX7.2/72.sce b/806/CH7/EX7.2/72.sce deleted file mode 100644 index 2989457bb..000000000 --- a/806/CH7/EX7.2/72.sce +++ /dev/null @@ -1,22 +0,0 @@ -clc
-pathname=get_absolute_file_path('72.sce')
-filename=pathname+filesep()+'72.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\72.txt')
-disp("Dredging operations in a river yield large volumes of sediments whose smallest particle is measured to be coarse sand with a diameter of 4 microns and whose largest particle is coarse sand with a diameter of 1000 microns or 1mm.determine the settling velocity for each size class.Gw=9764 N/m^3;Ssand=2.65;Sclay=1.6;and the viscosity at 30 degree celsius is 0.8*10D-3 N.s/m^2")
-disp("Solution:")
-disp("(i)For clay particles:")
-disp("Assuming reynolds number less than 1")
-w1=d1^2*(S1-1)*p/(18*v)//Settling velocity of clay particles
-R1=d1*w1/v//reynolds number
-disp(R1,"R1=")
-disp("Since reynolds number is less than 1,hence")
-disp("m/s",w1,"Settling velocity for clay particles")
-disp("(ii)For sand particles:")
-disp("Assuming reynolds number greater than 1 and equal to 220 Cd=0.7")
-w2=sqrt(1.333*d2*p*(S2-1)/(Cd*r))//Settling velocity of clay particles
-R2=d2*w2*1e3/v//reynolds number
-disp(R2,"R2")
-disp("Since the reynolds number is greater than 1")
-disp("m/s",w2,"Hence the settling velovity =")
-diary(0)
diff --git a/806/CH7/EX7.2/72.txt b/806/CH7/EX7.2/72.txt deleted file mode 100644 index 29bb09e63..000000000 --- a/806/CH7/EX7.2/72.txt +++ /dev/null @@ -1,49 +0,0 @@ -
- Dredging operations in a river yield la
- rge volumes of sediments whose sma
- llest particle is measured to be c
- oarse sand with a diameter of 4 mi
- crons and whose largest particle i
- s coarse sand with a diameter of 1
- 000 microns or 1mm.determine the s
- ettling velocity for each size cla
- ss.Gw=9764 N/m^3;Ssand=2.65;Sclay=
- 1.6;and the viscosity at 30 degree
- celsius is 0.8*10D-3 N.s/m^2
-
- Solution:
-
- (i)For clay particles:
-
- Assuming reynolds number less than 1
-
- R1=
-
- 3.255D-08
-
- Since reynolds number is less than 1,he
- nce
-
- Settling velocity for clay particles
-
- 0.0000065
-
- m/s
-
- (ii)For sand particles:
-
- Assuming reynolds number greater than 1
- and equal to 220 Cd=0.7
-
- R2
-
- 219.41569
-
- Since the reynolds number is greater th
- an 1
-
- Hence the settling velovity =
-
- 0.1755325
-
- m/s
diff --git a/806/CH8/EX8.2/82.sce b/806/CH8/EX8.2/82.sce deleted file mode 100644 index 9b4886aa5..000000000 --- a/806/CH8/EX8.2/82.sce +++ /dev/null @@ -1,15 +0,0 @@ -clc
-pathname=get_absolute_file_path('82.sce')
-filename=pathname+filesep()+'82.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\82.txt')
-disp("A submarine moves through water at 30 ft/s.At a point A on the submarine 5 ft above the nose,the velocity of the submarine relative to the water is 50 ft/s.Determine the dynamic-pressure difference between this point and the nose,and determine the difference in total pressure between the two points.")
-disp("If the submarine is sationary and the water is movinf past it,The velocity at the nose is zero and the velocity at A is 50ft/s.By selecting the dynamic pressure at infinity as zero")
-E=q^2/2+g*hn
-p1=p*E//Pressure at nose
-p2=p*(E-q1^2/2)//Pressure at point A
-P1=p2-p1//Pressure difference at point A and nose
-P2=p*(g*hn-g*ha+(qn^2-q1^2)/2)
-disp("lb/ft^2",P1,"Hence dynamic pressure difference between point A and nose is=")
-disp("lb/ft^2",P2,"Hence total pressure difference between point A and nose is=")
-diary(0)
diff --git a/806/CH8/EX8.2/82.txt b/806/CH8/EX8.2/82.txt deleted file mode 100644 index e4947d3bd..000000000 --- a/806/CH8/EX8.2/82.txt +++ /dev/null @@ -1,31 +0,0 @@ -
- A submarine moves through water at 30 f
- t/s.At a point A on the submarine
- 5 ft above the nose,the velocity o
- f the submarine relative to the wa
- ter is 50 ft/s.Determine the dynam
- ic-pressure difference between thi
- s point and the nose,and determine
- the difference in total pressure
- between the two points.
-
- If the submarine is sationary and the w
- ater is movinf past it,The velocit
- y at the nose is zero and the velo
- city at A is 50ft/s.By selecting t
- he dynamic pressure at infinity as
- zero
-
- Hence dynamic pressure difference betwe
- en point A and nose is=
-
- - 2418.75
-
- lb/ft^2
-
- Hence total pressure difference between
- point A and nose is=
-
- - 2730.0334
-
- lb/ft^2
diff --git a/806/CH8/EX8.3/83.sce b/806/CH8/EX8.3/83.sce deleted file mode 100644 index 90666a4f9..000000000 --- a/806/CH8/EX8.3/83.sce +++ /dev/null @@ -1,13 +0,0 @@ -clc
-pathname=get_absolute_file_path('83.sce')
-filename=pathname+filesep()+'83.sci'
-exec(filename)
-diary('C:\users\Bhavesh\desktop\scilab\83.txt')
-disp("A source with strength 0.2m^3/s and a vortex with strength 1 m^2/s are located at the origin.Determine the equations for velocity potential and stream function.What are the velocity components at x=1 m,y=0.5 m?")
-disp("Solution:")
-r=sqrt(x^2+y^2)
-Vr=1/(10*%pi*r)
-Vt=1/(2*%pi*r)
-disp("m/s",Vr,"Vr=")
-disp("m/s",Vt,"Vt=")
-diary(0)
diff --git a/806/CH8/EX8.3/83.txt b/806/CH8/EX8.3/83.txt deleted file mode 100644 index 44a79db57..000000000 --- a/806/CH8/EX8.3/83.txt +++ /dev/null @@ -1,22 +0,0 @@ -
- A source with strength 0.2m^3/s and a v
- ortex with strength 1 m^2/s are lo
- cated at the origin.Determine the
- equations for velocity potential a
- nd stream function.What are the ve
- locity components at x=1 m,y=0.5 m
- ?
-
- Solution:
-
- Vr=
-
- 0.0284705
-
- m/s
-
- Vt=
-
- 0.1423525
-
- m/s
diff --git a/806/DEPENDENCIES/101.sci b/806/DEPENDENCIES/101.sci deleted file mode 100644 index 3b45cd5d1..000000000 --- a/806/DEPENDENCIES/101.sci +++ /dev/null @@ -1,7 +0,0 @@ -x=4.76//m
-y=1.22//m
-d=0.075//m(Diameter of orifice)
-H=4.88//m(Head)
-F=8900//N
-p=9810//N/m^3(Weight density of water)
-T=32.6//s
\ No newline at end of file diff --git a/806/DEPENDENCIES/1025.sci b/806/DEPENDENCIES/1025.sci deleted file mode 100644 index 6c1e24f33..000000000 --- a/806/DEPENDENCIES/1025.sci +++ /dev/null @@ -1,7 +0,0 @@ -Cd=0.74//coefficient of discharge
-h1=2//m
-p=15//kPa(Air pressure)
-S=0.92//Specific gravity of oil
-d=0.07//m(Diameter of opening)
-g=9.81//m/s^2(Acceleration due to gravity)
-P=9.810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1026.sci b/806/DEPENDENCIES/1026.sci deleted file mode 100644 index 51531ef72..000000000 --- a/806/DEPENDENCIES/1026.sci +++ /dev/null @@ -1,8 +0,0 @@ -Cd=0.74//coefficient of discharge
-h1=2//m
-p=15//kPa(Air pressure)
-S=0.92//Specific gravity of oil
-d=0.07//m(Diameter of opening)
-g=9.81//m/s^2(Acceleration due to gravity)
-P=9.810//N/m^3(Weight density of water)
-Cv=0.96//coefficient of velocity
\ No newline at end of file diff --git a/806/DEPENDENCIES/1032.sci b/806/DEPENDENCIES/1032.sci deleted file mode 100755 index c31a9ce9f..000000000 --- a/806/DEPENDENCIES/1032.sci +++ /dev/null @@ -1,6 +0,0 @@ -d=0.075//m(Diameter of orifice)
-D=1.5//m(Diameter of tank)
-H1=3//m
-H2=2.5//m
-Cd=0.82//Coefficient of discharge
-g=9.81//m/s^2(Acceleration due to gravity)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1054.sci b/806/DEPENDENCIES/1054.sci deleted file mode 100755 index 574bb71bc..000000000 --- a/806/DEPENDENCIES/1054.sci +++ /dev/null @@ -1,3 +0,0 @@ -l=1.5//m(Length of rectangular weir)
-D=2.25//m(Upstream depth)
-Q=0.45//m^3/s
\ No newline at end of file diff --git a/806/DEPENDENCIES/1055.sci b/806/DEPENDENCIES/1055.sci deleted file mode 100755 index ac64f3a74..000000000 --- a/806/DEPENDENCIES/1055.sci +++ /dev/null @@ -1,3 +0,0 @@ -q=170//L/s(Discharge)
-t=60//degrees
-g=9.81//m/s^2(Acceleration due to gravity)
\ No newline at end of file diff --git a/806/DEPENDENCIES/10_62.sci b/806/DEPENDENCIES/10_62.sci deleted file mode 100755 index ea197703b..000000000 --- a/806/DEPENDENCIES/10_62.sci +++ /dev/null @@ -1,2 +0,0 @@ -d1=17.5//mm(Diameter at vena contracta)
-d2=20//mm(diameter of orifice)
\ No newline at end of file diff --git a/806/DEPENDENCIES/10_66.sci b/806/DEPENDENCIES/10_66.sci deleted file mode 100755 index 973296f73..000000000 --- a/806/DEPENDENCIES/10_66.sci +++ /dev/null @@ -1,4 +0,0 @@ -d=0.05//m(Diameter)
-q=7.68//L(Discharge)
-H=3//m(Head)
-g=9.81//m/s^2(Acceleration due to gravity)
\ No newline at end of file diff --git a/806/DEPENDENCIES/11.sci b/806/DEPENDENCIES/11.sci deleted file mode 100755 index d459ca656..000000000 --- a/806/DEPENDENCIES/11.sci +++ /dev/null @@ -1,2 +0,0 @@ -u=0.005//kg/m.s(viscosityb of liquid)
-p=850//kg/cm^3(density of liquid)
\ No newline at end of file diff --git a/806/DEPENDENCIES/110.sci b/806/DEPENDENCIES/110.sci deleted file mode 100755 index 2a50b05ba..000000000 --- a/806/DEPENDENCIES/110.sci +++ /dev/null @@ -1,2 +0,0 @@ -m=2//kg
-w=17//N(newton)
\ No newline at end of file diff --git a/806/DEPENDENCIES/111.sci b/806/DEPENDENCIES/111.sci deleted file mode 100755 index 13f118fa8..000000000 --- a/806/DEPENDENCIES/111.sci +++ /dev/null @@ -1,2 +0,0 @@ -W=20//N(weight of a flour bag)
-g=9.81//m/s^2(Acceleration due to gravity on the earth)
\ No newline at end of file diff --git a/806/DEPENDENCIES/112.sci b/806/DEPENDENCIES/112.sci deleted file mode 100755 index c7b8bf0c7..000000000 --- a/806/DEPENDENCIES/112.sci +++ /dev/null @@ -1,3 +0,0 @@ -f1=600//N
-f2=1500//N
-u1=1//m/s
\ No newline at end of file diff --git a/806/DEPENDENCIES/113.sci b/806/DEPENDENCIES/113.sci deleted file mode 100755 index c1ac44276..000000000 --- a/806/DEPENDENCIES/113.sci +++ /dev/null @@ -1,2 +0,0 @@ -v=10.4//m^2/s(kinematic viscosity)
-S=0.85//specific gravity of fluid
diff --git a/806/DEPENDENCIES/114.sci b/806/DEPENDENCIES/114.sci deleted file mode 100755 index b9477b57a..000000000 --- a/806/DEPENDENCIES/114.sci +++ /dev/null @@ -1,2 +0,0 @@ -p=4//n/m^2(shear stress)\
-w=100//rad/s(angular deformation)
\ No newline at end of file diff --git a/806/DEPENDENCIES/115.sci b/806/DEPENDENCIES/115.sci deleted file mode 100755 index 6c5f5d5ba..000000000 --- a/806/DEPENDENCIES/115.sci +++ /dev/null @@ -1,3 +0,0 @@ -f=2//N/m^2( Shear stress)
-du=0.25//m/s(Velocity of plate)
-dy=0.5//mm(Distance between the two plates)
\ No newline at end of file diff --git a/806/DEPENDENCIES/116.sci b/806/DEPENDENCIES/116.sci deleted file mode 100755 index 450192452..000000000 --- a/806/DEPENDENCIES/116.sci +++ /dev/null @@ -1,5 +0,0 @@ -d=3//inches(Diameter of shaft)
-u=0.4//ft/sec
-dy=0.003//inches
-L=8//inches(length of sleeve)
-f=20//lb( Shear Force)
\ No newline at end of file diff --git a/806/DEPENDENCIES/12.sci b/806/DEPENDENCIES/12.sci deleted file mode 100755 index 160f9810b..000000000 --- a/806/DEPENDENCIES/12.sci +++ /dev/null @@ -1,5 +0,0 @@ -R=2//cm(Radius of sleeve)
-L=6//cm(Length of sleeve)
-dy=0.1//mm(clearance)
-u=0.2//N.s/m^2(viscosity)
-du=1200//rpm
\ No newline at end of file diff --git a/806/DEPENDENCIES/123.sci b/806/DEPENDENCIES/123.sci deleted file mode 100755 index e5ae08a72..000000000 --- a/806/DEPENDENCIES/123.sci +++ /dev/null @@ -1,2 +0,0 @@ -S=0.83//Specific gravity of fluid
-v=0.0004//m^2/s(kinematic viscosity)
\ No newline at end of file diff --git a/806/DEPENDENCIES/124.sci b/806/DEPENDENCIES/124.sci deleted file mode 100755 index 1398eeccb..000000000 --- a/806/DEPENDENCIES/124.sci +++ /dev/null @@ -1,5 +0,0 @@ -w=120//lb(weight of body)
-a=2//ft^2(area of the body)
-v=0.002//lb.s/ft^2(viscosity of fluid)
-u=3//ft/s(speed of the body)
-t=30//degree(angle of inclined plane with the horizontal surface)
diff --git a/806/DEPENDENCIES/126.sci b/806/DEPENDENCIES/126.sci deleted file mode 100755 index 184c7e3b4..000000000 --- a/806/DEPENDENCIES/126.sci +++ /dev/null @@ -1,3 +0,0 @@ -u=3.05//lb.s/ft^2(Dynamic viscosity)
-p=48//lb/ft^3(specific weight)
-g=9.81//m/s^2
\ No newline at end of file diff --git a/806/DEPENDENCIES/127.sci b/806/DEPENDENCIES/127.sci deleted file mode 100755 index 1b9ccfeea..000000000 --- a/806/DEPENDENCIES/127.sci +++ /dev/null @@ -1,2 +0,0 @@ -S=0.75//specific gravity
-g=9.81//m/s^2(Acceleration due to gravity)
diff --git a/806/DEPENDENCIES/129.sci b/806/DEPENDENCIES/129.sci deleted file mode 100755 index 6e63ae404..000000000 --- a/806/DEPENDENCIES/129.sci +++ /dev/null @@ -1,2 +0,0 @@ -p=2.94//g/cm^3(density)
-W=9.81//kN/m^3(Specific weight of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/13.sci b/806/DEPENDENCIES/13.sci deleted file mode 100755 index 40f74ced7..000000000 --- a/806/DEPENDENCIES/13.sci +++ /dev/null @@ -1,3 +0,0 @@ -M=44//Molecular weight
-T=20//degree celsius
-P=0.9//MPa(Pressure)
\ No newline at end of file diff --git a/806/DEPENDENCIES/14.sci b/806/DEPENDENCIES/14.sci deleted file mode 100755 index 6f0c1f5a0..000000000 --- a/806/DEPENDENCIES/14.sci +++ /dev/null @@ -1,4 +0,0 @@ -V1=1000//cm^3(Volume of Liquid at Pressure 1)
-P1=1//MN/m^2(Pressure)
-V2=995//cm^3(Volume of Liquid at Pressure 2)
-P2=2//MN/m^2(Pressure
diff --git a/806/DEPENDENCIES/144.sci b/806/DEPENDENCIES/144.sci deleted file mode 100755 index 3b60490f7..000000000 --- a/806/DEPENDENCIES/144.sci +++ /dev/null @@ -1,4 +0,0 @@ -R=210//m.N//kg.K(gas constant)\
-T=20//degree celsius
-P=0.2//MPa(Pressure)
-V=40//litres(volume)
\ No newline at end of file diff --git a/806/DEPENDENCIES/15.sci b/806/DEPENDENCIES/15.sci deleted file mode 100755 index 4186dca12..000000000 --- a/806/DEPENDENCIES/15.sci +++ /dev/null @@ -1,5 +0,0 @@ -V1=1000//cm^3(Volume of Liquid at Pressure 1)
-P1=1//MN/m^2(Pressure)
-V2=995//cm^3(Volume of Liquid at Pressure 2)
-P2=2//MN/m^2(Pressure
-M=15//mg(Mass of sediments)
diff --git a/806/DEPENDENCIES/156.sci b/806/DEPENDENCIES/156.sci deleted file mode 100755 index 6c7995c2d..000000000 --- a/806/DEPENDENCIES/156.sci +++ /dev/null @@ -1,3 +0,0 @@ -dp1=1000//lb/ft^2(Pressure change)
-dp2=60//kPa(Pressure increase)
-p=0.02//percent change in density
\ No newline at end of file diff --git a/806/DEPENDENCIES/157.sci b/806/DEPENDENCIES/157.sci deleted file mode 100755 index 33a0e21bc..000000000 --- a/806/DEPENDENCIES/157.sci +++ /dev/null @@ -1,2 +0,0 @@ -K=2.2//GPa(Bulk modulus)
-dv=-0.5//percent(volume change of water)
diff --git a/806/DEPENDENCIES/16.sci b/806/DEPENDENCIES/16.sci deleted file mode 100755 index b0503ae81..000000000 --- a/806/DEPENDENCIES/16.sci +++ /dev/null @@ -1,2 +0,0 @@ -m=3//slugs
-g=31.7//ft/s^2
\ No newline at end of file diff --git a/806/DEPENDENCIES/174.sci b/806/DEPENDENCIES/174.sci deleted file mode 100755 index 211532831..000000000 --- a/806/DEPENDENCIES/174.sci +++ /dev/null @@ -1,4 +0,0 @@ -d=0.2//inches(Diameter of pipe)
-h=0.09//inches(Capilaary rise)
-T=0.005//lb/ft(Surface tension)
-p=62.455//lb/ft^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/18.sci b/806/DEPENDENCIES/18.sci deleted file mode 100755 index be2ac0531..000000000 --- a/806/DEPENDENCIES/18.sci +++ /dev/null @@ -1,3 +0,0 @@ -m=450//kg
-g1=9.81//m/s^2(acceleration due to gravity on the surface of the earth)
-g2=9.81/6//m/s^2(acceleration due to gravity on the surface of moon)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1_32.sci b/806/DEPENDENCIES/1_32.sci deleted file mode 100755 index fbb08df73..000000000 --- a/806/DEPENDENCIES/1_32.sci +++ /dev/null @@ -1,2 +0,0 @@ -F=10//N(Force)
-m=2//kg(mass)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1_33.sci b/806/DEPENDENCIES/1_33.sci deleted file mode 100755 index 33b2bdcef..000000000 --- a/806/DEPENDENCIES/1_33.sci +++ /dev/null @@ -1,2 +0,0 @@ -m=3//kg(mass)
-g=10//m/s^2(acceleration due to gravity)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1_410.sci b/806/DEPENDENCIES/1_410.sci deleted file mode 100755 index 3dfda8ce6..000000000 --- a/806/DEPENDENCIES/1_410.sci +++ /dev/null @@ -1,2 +0,0 @@ -v=3*1e-8//m^2/s(kinematic viscosity)
-p=800//kg/m^3(Mass Density)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1_48.sci b/806/DEPENDENCIES/1_48.sci deleted file mode 100755 index 5389e39ff..000000000 --- a/806/DEPENDENCIES/1_48.sci +++ /dev/null @@ -1,3 +0,0 @@ -u=0.06//kg/m.s(Dynamic viscosity)
-S=0.6//specific gravity
-P=1000//kg/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/1_72.sci b/806/DEPENDENCIES/1_72.sci deleted file mode 100755 index 447de0fab..000000000 --- a/806/DEPENDENCIES/1_72.sci +++ /dev/null @@ -1 +0,0 @@ -M=28//molecular weight
\ No newline at end of file diff --git a/806/DEPENDENCIES/1_84.sci b/806/DEPENDENCIES/1_84.sci deleted file mode 100755 index 5fea56ec2..000000000 --- a/806/DEPENDENCIES/1_84.sci +++ /dev/null @@ -1,3 +0,0 @@ -dp=1//MPa(Change in pressure)
-V=300//liters
-dv=-0.6//liters
\ No newline at end of file diff --git a/806/DEPENDENCIES/210.sci b/806/DEPENDENCIES/210.sci deleted file mode 100755 index 108f715d0..000000000 --- a/806/DEPENDENCIES/210.sci +++ /dev/null @@ -1,4 +0,0 @@ -P=50//kPa
-S1=13.6//specifc gravity of mercury
-S2=2.94//specifc gravity of acetylene tetrabromide
-Sw=1//specific gravity of water
\ No newline at end of file diff --git a/806/DEPENDENCIES/2102.sci b/806/DEPENDENCIES/2102.sci deleted file mode 100755 index f6c8fcc71..000000000 --- a/806/DEPENDENCIES/2102.sci +++ /dev/null @@ -1,6 +0,0 @@ -S1=0.6//Specific gravity of upper half of cube
-S2=1.4//Specific gravity of lower half of cube
-S3=0.9//Specific gravity of upper fluid
-S4=1.2//Specific gravity of lower fluid
-s=2//feet(Side of a cube)
-p=62.455//lb/ft^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2103.sci b/806/DEPENDENCIES/2103.sci deleted file mode 100755 index 454e8bcf9..000000000 --- a/806/DEPENDENCIES/2103.sci +++ /dev/null @@ -1,4 +0,0 @@ -p=9810//N/m^3(Weight density of water)
-S=0.83//Specific gravity of oil
-w1=3//N(Weight in water)
-w2=4//N(Weight in oil)
\ No newline at end of file diff --git a/806/DEPENDENCIES/212.sci b/806/DEPENDENCIES/212.sci deleted file mode 100755 index 6364671dd..000000000 --- a/806/DEPENDENCIES/212.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=750//mm of Hg
-p=9810//weight density of water in N/m^3
-p1=4//atmosphere
-S=13.6//specific gravity of mercury
\ No newline at end of file diff --git a/806/DEPENDENCIES/214.sci b/806/DEPENDENCIES/214.sci deleted file mode 100755 index fb06c13d9..000000000 --- a/806/DEPENDENCIES/214.sci +++ /dev/null @@ -1,5 +0,0 @@ -h=300//mm-Hg
-S1=1//Specific gravity of water
-S2=0.83//Specific gravity of kerosen
-S3=2.94//Specific gravity of acetylene tetrabromide
-S=13.6//Specific gravity of mercury
\ No newline at end of file diff --git a/806/DEPENDENCIES/216.sci b/806/DEPENDENCIES/216.sci deleted file mode 100755 index 2c3bf49a1..000000000 --- a/806/DEPENDENCIES/216.sci +++ /dev/null @@ -1,3 +0,0 @@ -h1=2//m
-h2=0.5//m
-S=0.85//specific gravity of oil
\ No newline at end of file diff --git a/806/DEPENDENCIES/218.sci b/806/DEPENDENCIES/218.sci deleted file mode 100755 index d75a99a06..000000000 --- a/806/DEPENDENCIES/218.sci +++ /dev/null @@ -1,2 +0,0 @@ -h=20//inches
-S=1.9//Specific gravity of liquid
\ No newline at end of file diff --git a/806/DEPENDENCIES/219.sci b/806/DEPENDENCIES/219.sci deleted file mode 100755 index 56917ba09..000000000 --- a/806/DEPENDENCIES/219.sci +++ /dev/null @@ -1,3 +0,0 @@ -pa=-30//kPa
-p=9810//N/m^3
-S=0.83//specific gravity of kerosene
\ No newline at end of file diff --git a/806/DEPENDENCIES/22.sci b/806/DEPENDENCIES/22.sci deleted file mode 100755 index 13f18540f..000000000 --- a/806/DEPENDENCIES/22.sci +++ /dev/null @@ -1,2 +0,0 @@ -h=1250//feet
-p=62.455//wieht density of water in lb/ft^3
\ No newline at end of file diff --git a/806/DEPENDENCIES/220.sci b/806/DEPENDENCIES/220.sci deleted file mode 100755 index 9580cda7b..000000000 --- a/806/DEPENDENCIES/220.sci +++ /dev/null @@ -1,2 +0,0 @@ -h=8//inches
-h1=29//inches of mercury(barometer reading)
\ No newline at end of file diff --git a/806/DEPENDENCIES/222.sci b/806/DEPENDENCIES/222.sci deleted file mode 100755 index 1aeadf511..000000000 --- a/806/DEPENDENCIES/222.sci +++ /dev/null @@ -1,3 +0,0 @@ -h1=75//mm
-S=1//specific gravity of water
-S1=13.6//specific gravity of mercury
\ No newline at end of file diff --git a/806/DEPENDENCIES/223.sci b/806/DEPENDENCIES/223.sci deleted file mode 100755 index 4ef910546..000000000 --- a/806/DEPENDENCIES/223.sci +++ /dev/null @@ -1,6 +0,0 @@ -S1=1.0//specific gravity of the liquid in the pipe A
-S2=0.95//specific gravity of manometric liquid
-S3=1.0//specific gravity of liquid in pipe B
-h1=280//mm
-h2=280//mm
-h3=1000//mm
\ No newline at end of file diff --git a/806/DEPENDENCIES/224.sci b/806/DEPENDENCIES/224.sci deleted file mode 100755 index 1db88765a..000000000 --- a/806/DEPENDENCIES/224.sci +++ /dev/null @@ -1,5 +0,0 @@ -S1=1.0//specific gravity of liquid in pipe A
-S2=0.95//specific gravity of manometric liquid
-S3=1.0//specific gravity of liquid in pipe B
-h1=280//mm
-h3=1000//mm
\ No newline at end of file diff --git a/806/DEPENDENCIES/225.sci b/806/DEPENDENCIES/225.sci deleted file mode 100755 index 2d2b80d0a..000000000 --- a/806/DEPENDENCIES/225.sci +++ /dev/null @@ -1,10 +0,0 @@ -S1=0.83
-S2=13.6
-S3=0.83
-h1=0.150//mm
-h2=0.070//mm
-h3=0.120//mm
-pb=10//psi
-pa=20//psi
-h=.720//mm of Hg
-p=9810//weight density of water
\ No newline at end of file diff --git a/806/DEPENDENCIES/226.sci b/806/DEPENDENCIES/226.sci deleted file mode 100755 index 7113b8b5f..000000000 --- a/806/DEPENDENCIES/226.sci +++ /dev/null @@ -1,5 +0,0 @@ -S1=0.83//Specific gravity of liquid in pipe A
-S2=13.6//Specific gravity of manometric liquid
-S3=0.83//Specific gravity of liquid in pope B
-h1=150//mm
-h3=120//mm
\ No newline at end of file diff --git a/806/DEPENDENCIES/22one.sci b/806/DEPENDENCIES/22one.sci deleted file mode 100755 index 7bcb5f913..000000000 --- a/806/DEPENDENCIES/22one.sci +++ /dev/null @@ -1,5 +0,0 @@ -S1=0.86//specifc gravity of liquid in pipe A
-S2=1//Specifc gravity of manometric liquid
-h1=150//mm
-h2=90//mm
-H=720//mm of Hg
\ No newline at end of file diff --git a/806/DEPENDENCIES/23.sci b/806/DEPENDENCIES/23.sci deleted file mode 100755 index 4f1301f55..000000000 --- a/806/DEPENDENCIES/23.sci +++ /dev/null @@ -1,2 +0,0 @@ -a=12//kg/m^4
-h=10//meter
\ No newline at end of file diff --git a/806/DEPENDENCIES/232.sci b/806/DEPENDENCIES/232.sci deleted file mode 100755 index b6b51e45c..000000000 --- a/806/DEPENDENCIES/232.sci +++ /dev/null @@ -1,3 +0,0 @@ -f=1//MN
-d1=0.040//mm(Diameter of piston)
-d2=0.240//mm(Diameter of cylinder)
diff --git a/806/DEPENDENCIES/242.sci b/806/DEPENDENCIES/242.sci deleted file mode 100755 index e60301987..000000000 --- a/806/DEPENDENCIES/242.sci +++ /dev/null @@ -1,4 +0,0 @@ -a=3//ft
-b=5//ft
-c=4//ft
-p=55//lb/ft^3
\ No newline at end of file diff --git a/806/DEPENDENCIES/246.sci b/806/DEPENDENCIES/246.sci deleted file mode 100755 index d0eff33a7..000000000 --- a/806/DEPENDENCIES/246.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=6//ft(Height of gate)
-w=4//ft(width of the gate)
-H=10//ft(height of water from bootom of gate)
-p=9810//Unit weight of water
\ No newline at end of file diff --git a/806/DEPENDENCIES/247.sci b/806/DEPENDENCIES/247.sci deleted file mode 100755 index 11c480f91..000000000 --- a/806/DEPENDENCIES/247.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=6//feet(Height of gate)
-w=4//feet(Width of gate)
-H=10//feet(Total water depth)
-p=62.455//lb/ft^3(Weight density of water)
diff --git a/806/DEPENDENCIES/24one.sci b/806/DEPENDENCIES/24one.sci deleted file mode 100755 index 2fa6c63f2..000000000 --- a/806/DEPENDENCIES/24one.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=6//m(Height of triangular gate)
-b=6//m(base of triangle)
-h1=4//m(Height of water above the vertex of gate)
-p=9810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/253.sci b/806/DEPENDENCIES/253.sci deleted file mode 100755 index 39108cb03..000000000 --- a/806/DEPENDENCIES/253.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=6//feet(Height of gate)
-w=4//feet(Width of gate)
-H=10//feet(Total water depth)
-p=9810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/258.sci b/806/DEPENDENCIES/258.sci deleted file mode 100755 index 16ab7fda0..000000000 --- a/806/DEPENDENCIES/258.sci +++ /dev/null @@ -1,2 +0,0 @@ -h=1//m(height of flash board)
-w=1//m(width of flash board)
\ No newline at end of file diff --git a/806/DEPENDENCIES/263.sci b/806/DEPENDENCIES/263.sci deleted file mode 100755 index 05f8de687..000000000 --- a/806/DEPENDENCIES/263.sci +++ /dev/null @@ -1,4 +0,0 @@ -a=2.8//m
-b=2.1//m
-w=2//m(Width of gate)
-p=10000//N/m^3(Weight density of liquid)
\ No newline at end of file diff --git a/806/DEPENDENCIES/269.sci b/806/DEPENDENCIES/269.sci deleted file mode 100755 index 527926d6b..000000000 --- a/806/DEPENDENCIES/269.sci +++ /dev/null @@ -1,7 +0,0 @@ -p=54//lb/ft^3(Weigth density of liquid)
-h1=12//feet(Liquid height on one side of the gate)
-h2=8//feet(Liquid height on other side of the gate)
-b=8//feet
-c=6//feet
-w=6//feet(Width of gate)
-W=2000//kg(Mass of gate)
\ No newline at end of file diff --git a/806/DEPENDENCIES/278.sci b/806/DEPENDENCIES/278.sci deleted file mode 100755 index e6937fede..000000000 --- a/806/DEPENDENCIES/278.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=3//m(Height of water above the upper edge of gate)
-r=2//m(Radius of gate)
-w=2//m(Width of gate)
-p=9810//N/m^3(Weight density of water)
diff --git a/806/DEPENDENCIES/279.sci b/806/DEPENDENCIES/279.sci deleted file mode 100755 index 21b370ec8..000000000 --- a/806/DEPENDENCIES/279.sci +++ /dev/null @@ -1,3 +0,0 @@ -p=9000//N/m^3(Weight density of the liquid)
-w=2//m(Width of the gate)
-h=2//m(Water level)
\ No newline at end of file diff --git a/806/DEPENDENCIES/282.sci b/806/DEPENDENCIES/282.sci deleted file mode 100755 index 85db00f71..000000000 --- a/806/DEPENDENCIES/282.sci +++ /dev/null @@ -1,4 +0,0 @@ -w=2//m(Width of gate)
-r=1.5//m(Radius of gate)
-h=4.5//m(Height of water above the top edge of gate)
-p=9810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_21.sci b/806/DEPENDENCIES/2_21.sci deleted file mode 100755 index ffd57a5d5..000000000 --- a/806/DEPENDENCIES/2_21.sci +++ /dev/null @@ -1,4 +0,0 @@ -S=0.75//Specific gravity
-p=115//kPa abs
-h=2.0//meter
-P=9.810//(kN/m^3)weight density
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_22.sci b/806/DEPENDENCIES/2_22.sci deleted file mode 100755 index 0253dd707..000000000 --- a/806/DEPENDENCIES/2_22.sci +++ /dev/null @@ -1,5 +0,0 @@ -h1=80//mm of H2O
-h2=60//mm
-S2=2.94//specifc gravity
-S=13.6//specific gravity of mercury
-S1=1//specific gravity of water
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_33.sci b/806/DEPENDENCIES/2_33.sci deleted file mode 100755 index 05eefa61e..000000000 --- a/806/DEPENDENCIES/2_33.sci +++ /dev/null @@ -1,4 +0,0 @@ -h=730//mm-Hg(Barometer reading)
-p=-10//kPa(Pressure)
-S=13.6//specific gravity of mercury
-P=9810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_34.sci b/806/DEPENDENCIES/2_34.sci deleted file mode 100755 index b05ec07c7..000000000 --- a/806/DEPENDENCIES/2_34.sci +++ /dev/null @@ -1,2 +0,0 @@ -h=29//inches-Hg(Barometer reading)
-p=7//psi(Pressure)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_41.sci b/806/DEPENDENCIES/2_41.sci deleted file mode 100755 index 014cb9492..000000000 --- a/806/DEPENDENCIES/2_41.sci +++ /dev/null @@ -1,2 +0,0 @@ -S=0.80//specific gravity of oil
-h=60//cm
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_42.sci b/806/DEPENDENCIES/2_42.sci deleted file mode 100755 index 927ab13b4..000000000 --- a/806/DEPENDENCIES/2_42.sci +++ /dev/null @@ -1,4 +0,0 @@ -h1=0.5//m
-h2=0.2//m
-S=1
-p=9810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_43.sci b/806/DEPENDENCIES/2_43.sci deleted file mode 100755 index 5077b6a16..000000000 --- a/806/DEPENDENCIES/2_43.sci +++ /dev/null @@ -1,6 +0,0 @@ -h1=2//ft
-h2=1//ft
-h3=4//ft
-S1=0.80
-S2=0.65
-S3=1
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_44.sci b/806/DEPENDENCIES/2_44.sci deleted file mode 100755 index 67778c4c5..000000000 --- a/806/DEPENDENCIES/2_44.sci +++ /dev/null @@ -1,7 +0,0 @@ -h1=0.38//m
-h2=0.33//m
-h3=0.6//m
-S1=0.8
-S2=3.0
-S3=1.0
-p=9.81//kN/m^2(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_45.sci b/806/DEPENDENCIES/2_45.sci deleted file mode 100755 index 24ebebd41..000000000 --- a/806/DEPENDENCIES/2_45.sci +++ /dev/null @@ -1,3 +0,0 @@ -h=0.5//m
-S=13.6//Specific gravity of mercury
-p=9810//N/m^3(Weight density of water)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_53.sci b/806/DEPENDENCIES/2_53.sci deleted file mode 100755 index f97e569e5..000000000 --- a/806/DEPENDENCIES/2_53.sci +++ /dev/null @@ -1,3 +0,0 @@ -b=3//m(Breadth of rectangular surface)
-l=4//m(length of rectangular surface)
-h=6//m(Distance between the oil surface and the lower 3-m edge)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_62.sci b/806/DEPENDENCIES/2_62.sci deleted file mode 100755 index f650eed2c..000000000 --- a/806/DEPENDENCIES/2_62.sci +++ /dev/null @@ -1,3 +0,0 @@ -d=5000//mm(Diameter of pipe)
-p=1.4//MPa
-ts=55//MPa(Allowable tensile stress)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_66.sci b/806/DEPENDENCIES/2_66.sci deleted file mode 100755 index 95e30bab0..000000000 --- a/806/DEPENDENCIES/2_66.sci +++ /dev/null @@ -1,3 +0,0 @@ -d=50//mm(Inner diameter of pipe)
-t=5//m(thickness of pipe)
-p=0.89//MPa(Pressure on pipe wall)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_71.sci b/806/DEPENDENCIES/2_71.sci deleted file mode 100755 index 75eefdccc..000000000 --- a/806/DEPENDENCIES/2_71.sci +++ /dev/null @@ -1,6 +0,0 @@ -h=0.25//m(Height of slab)
-l=1//m(Length of slab)
-w=1//m(Width of slab)
-S=0.50//Specific gravity of slab
-p=9810//N/m^3(Weight density of slab)
-W1=400//N(Extra load)
\ No newline at end of file diff --git a/806/DEPENDENCIES/2_82.sci b/806/DEPENDENCIES/2_82.sci deleted file mode 100755 index 8b1d1f6da..000000000 --- a/806/DEPENDENCIES/2_82.sci +++ /dev/null @@ -1,5 +0,0 @@ -a=1//m(Side of cube)
-m=550//kg(Mass of cube)
-g=9.81//(Acceleration due to gravity)
-S=0.90//specifc gravity of oil
-p=9810//N/m^3(Weight density of oil)
\ No newline at end of file diff --git a/806/DEPENDENCIES/45.sci b/806/DEPENDENCIES/45.sci deleted file mode 100755 index 989daa38f..000000000 --- a/806/DEPENDENCIES/45.sci +++ /dev/null @@ -1,5 +0,0 @@ -v1=3//m/s
-v2=10//m/s
-h1=2//m
-h2=1//m
-p=9.81//kN/m^3
\ No newline at end of file diff --git a/806/DEPENDENCIES/46.sci b/806/DEPENDENCIES/46.sci deleted file mode 100755 index 3d5eebf39..000000000 --- a/806/DEPENDENCIES/46.sci +++ /dev/null @@ -1,4 +0,0 @@ -d1=6//inch
-d2=4//inches
-a=3//lb/inch^2(p1-p2)
-s=0.9//specific gravity of oil
\ No newline at end of file diff --git a/806/DEPENDENCIES/47.sci b/806/DEPENDENCIES/47.sci deleted file mode 100755 index c969f5540..000000000 --- a/806/DEPENDENCIES/47.sci +++ /dev/null @@ -1,5 +0,0 @@ -z1=15//m
-d2=1//m(Diameter of Outflow)
-g=9.81//m/s^2(Acceleration due to gravity)
-A=20000000//m^2(Area of reservoir)
-H=20//mm(Depth of liquid)
diff --git a/806/DEPENDENCIES/71.sci b/806/DEPENDENCIES/71.sci deleted file mode 100755 index 44ee72c13..000000000 --- a/806/DEPENDENCIES/71.sci +++ /dev/null @@ -1,6 +0,0 @@ -l=30//m(Length of plate)
-w=3//m(WIdth of plate)
-U=6//m/s^2(Speed of plate)
-v=1.007*1e-6//kinematic viscosity of water
-p=998.2//kg/m^3(Density of water at 20 degree celsius)
-l1=3//m
diff --git a/806/DEPENDENCIES/72.sci b/806/DEPENDENCIES/72.sci deleted file mode 100755 index e7627e906..000000000 --- a/806/DEPENDENCIES/72.sci +++ /dev/null @@ -1,8 +0,0 @@ -d1=4*1e-6//m(Diameter of clay particle)
-d2=1e-3//m(Diameter of sand particles)
-p=9764//N/m^3(Weight density of water)
-S2=2.65//specific gravity of sand particles
-S1=1.6//specific gravity of clay particles
-v=0.8*1e-3//N.s/m^2(Kinematic viscosity at 30 degree celsius)
-Cd=0.7
-r=995.7//(kg/m^3)Mass density of water
diff --git a/806/DEPENDENCIES/82.sci b/806/DEPENDENCIES/82.sci deleted file mode 100755 index 0d2ca9b54..000000000 --- a/806/DEPENDENCIES/82.sci +++ /dev/null @@ -1,7 +0,0 @@ -qn=0//ft/s(Velocity at nose)
-q=30//ft/s(Velocity of submarine)
-q1=50//ft/s(velocity of point A)
-g=32.174//ft/s^2(acceleration due to gravity)
-hn=0//ft
-ha=5//ft(Height of point A above the nose)
-p=1.935//slugs/ft^3
diff --git a/806/DEPENDENCIES/83.sci b/806/DEPENDENCIES/83.sci deleted file mode 100755 index 342d67414..000000000 --- a/806/DEPENDENCIES/83.sci +++ /dev/null @@ -1,4 +0,0 @@ -s1=0.2//m^3(strength of source)
-s2=1//m^3(strength of vortex)
-x=1//m
-y=0.5//m
|