diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/input/touchscreen')
68 files changed, 27736 insertions, 0 deletions
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/88pm860x-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/88pm860x-ts.c new file mode 100644 index 00000000..05f30b73 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/88pm860x-ts.c @@ -0,0 +1,226 @@ +/* + * Touchscreen driver for Marvell 88PM860x + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> + +#define MEAS_LEN (8) +#define ACCURATE_BIT (12) + +/* touch register */ +#define MEAS_EN3 (0x52) + +#define MEAS_TSIX_1 (0x8D) +#define MEAS_TSIX_2 (0x8E) +#define MEAS_TSIY_1 (0x8F) +#define MEAS_TSIY_2 (0x90) +#define MEAS_TSIZ1_1 (0x91) +#define MEAS_TSIZ1_2 (0x92) +#define MEAS_TSIZ2_1 (0x93) +#define MEAS_TSIZ2_2 (0x94) + +/* bit definitions of touch */ +#define MEAS_PD_EN (1 << 3) +#define MEAS_TSIX_EN (1 << 4) +#define MEAS_TSIY_EN (1 << 5) +#define MEAS_TSIZ1_EN (1 << 6) +#define MEAS_TSIZ2_EN (1 << 7) + +struct pm860x_touch { + struct input_dev *idev; + struct i2c_client *i2c; + struct pm860x_chip *chip; + int irq; + int res_x; /* resistor of Xplate */ +}; + +static irqreturn_t pm860x_touch_handler(int irq, void *data) +{ + struct pm860x_touch *touch = data; + struct pm860x_chip *chip = touch->chip; + unsigned char buf[MEAS_LEN]; + int x, y, pen_down; + int z1, z2, rt = 0; + int ret; + + ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf); + if (ret < 0) + goto out; + + pen_down = buf[1] & (1 << 6); + x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F); + y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F); + z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F); + z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F); + + if (pen_down) { + if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) { + rt = z2 / z1 - 1; + rt = (rt * touch->res_x * x) >> ACCURATE_BIT; + dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n", + z1, z2, rt); + } + input_report_abs(touch->idev, ABS_X, x); + input_report_abs(touch->idev, ABS_Y, y); + input_report_abs(touch->idev, ABS_PRESSURE, rt); + input_report_key(touch->idev, BTN_TOUCH, 1); + dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y); + } else { + input_report_abs(touch->idev, ABS_PRESSURE, 0); + input_report_key(touch->idev, BTN_TOUCH, 0); + dev_dbg(chip->dev, "pen release\n"); + } + input_sync(touch->idev); + +out: + return IRQ_HANDLED; +} + +static int pm860x_touch_open(struct input_dev *dev) +{ + struct pm860x_touch *touch = input_get_drvdata(dev); + int data, ret; + + data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN + | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; + ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data); + if (ret < 0) + goto out; + return 0; +out: + return ret; +} + +static void pm860x_touch_close(struct input_dev *dev) +{ + struct pm860x_touch *touch = input_get_drvdata(dev); + int data; + + data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN + | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; + pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0); +} + +static int __devinit pm860x_touch_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_platform_data *pm860x_pdata = \ + pdev->dev.parent->platform_data; + struct pm860x_touch_pdata *pdata = NULL; + struct pm860x_touch *touch; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + return -EINVAL; + } + + if (!pm860x_pdata) { + dev_err(&pdev->dev, "platform data is missing\n"); + return -EINVAL; + } + + pdata = pm860x_pdata->touch; + if (!pdata) { + dev_err(&pdev->dev, "touchscreen data is missing\n"); + return -EINVAL; + } + + touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL); + if (touch == NULL) + return -ENOMEM; + dev_set_drvdata(&pdev->dev, touch); + + touch->idev = input_allocate_device(); + if (touch->idev == NULL) { + dev_err(&pdev->dev, "Failed to allocate input device!\n"); + ret = -ENOMEM; + goto out; + } + + touch->idev->name = "88pm860x-touch"; + touch->idev->phys = "88pm860x/input0"; + touch->idev->id.bustype = BUS_I2C; + touch->idev->dev.parent = &pdev->dev; + touch->idev->open = pm860x_touch_open; + touch->idev->close = pm860x_touch_close; + touch->chip = chip; + touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + touch->irq = irq + chip->irq_base; + touch->res_x = pdata->res_x; + input_set_drvdata(touch->idev, touch); + + ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler, + IRQF_ONESHOT, "touch", touch); + if (ret < 0) + goto out_irq; + + __set_bit(EV_ABS, touch->idev->evbit); + __set_bit(ABS_X, touch->idev->absbit); + __set_bit(ABS_Y, touch->idev->absbit); + __set_bit(ABS_PRESSURE, touch->idev->absbit); + __set_bit(EV_SYN, touch->idev->evbit); + __set_bit(EV_KEY, touch->idev->evbit); + __set_bit(BTN_TOUCH, touch->idev->keybit); + + input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0); + input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0); + input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT, + 0, 0); + + ret = input_register_device(touch->idev); + if (ret < 0) { + dev_err(chip->dev, "Failed to register touch!\n"); + goto out_rg; + } + + platform_set_drvdata(pdev, touch); + return 0; +out_rg: + free_irq(touch->irq, touch); +out_irq: + input_free_device(touch->idev); +out: + kfree(touch); + return ret; +} + +static int __devexit pm860x_touch_remove(struct platform_device *pdev) +{ + struct pm860x_touch *touch = platform_get_drvdata(pdev); + + input_unregister_device(touch->idev); + free_irq(touch->irq, touch); + platform_set_drvdata(pdev, NULL); + kfree(touch); + return 0; +} + +static struct platform_driver pm860x_touch_driver = { + .driver = { + .name = "88pm860x-touch", + .owner = THIS_MODULE, + }, + .probe = pm860x_touch_probe, + .remove = __devexit_p(pm860x_touch_remove), +}; +module_platform_driver(pm860x_touch_driver); + +MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-touch"); + diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/Kconfig b/ANDROID_3.4.5/drivers/input/touchscreen/Kconfig new file mode 100644 index 00000000..1e7c563c --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/Kconfig @@ -0,0 +1,854 @@ +# +# Touchscreen driver configuration +# +menuconfig INPUT_TOUCHSCREEN + bool "Touchscreens" + help + Say Y here, and a list of supported touchscreens will be displayed. + This option doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_TOUCHSCREEN + +config TOUCHSCREEN_88PM860X + tristate "Marvell 88PM860x touchscreen" + depends on MFD_88PM860X + help + Say Y here if you have a 88PM860x PMIC and want to enable + support for the built-in touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called 88pm860x-ts. + +config TOUCHSCREEN_ADS7846 + tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens" + depends on SPI_MASTER + depends on HWMON = n || HWMON + help + Say Y here if you have a touchscreen interface using the + ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller, + and your board-specific setup code includes that in its + table of SPI devices. + + If HWMON is selected, and the driver is told the reference voltage + on your board, you will also get hwmon interfaces for the voltage + (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ads7846. + +config TOUCHSCREEN_AD7877 + tristate "AD7877 based touchscreens" + depends on SPI_MASTER + help + Say Y here if you have a touchscreen interface using the + AD7877 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7877. + +config TOUCHSCREEN_AD7879 + tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface" + help + Say Y here if you want to support a touchscreen interface using + the AD7879-1/AD7889-1 controller. + + You should select a bus connection too. + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_AD7879 && I2C + help + Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad7879-i2c. + +config TOUCHSCREEN_AD7879_SPI + tristate "support SPI bus connection" + depends on TOUCHSCREEN_AD7879 && SPI_MASTER + help + Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879-spi. + +config TOUCHSCREEN_ATMEL_MXT + tristate "Atmel mXT I2C Touchscreen" + depends on I2C + help + Say Y here if you have Atmel mXT series I2C touchscreen, + such as AT42QT602240/ATMXT224, connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called atmel_mxt_ts. + +config TOUCHSCREEN_AUO_PIXCIR + tristate "AUO in-cell touchscreen using Pixcir ICs" + depends on I2C + depends on GPIOLIB + help + Say Y here if you have a AUO display with in-cell touchscreen + using Pixcir ICs. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called auo-pixcir-ts. + +config TOUCHSCREEN_BITSY + tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" + depends on SA1100_BITSY + select SERIO + help + Say Y here if you have the h3600 (Bitsy) touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called h3600_ts_input. + +config TOUCHSCREEN_BU21013 + tristate "BU21013 based touch panel controllers" + depends on I2C + help + Say Y here if you have a bu21013 touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called bu21013_ts. + +config TOUCHSCREEN_CY8CTMG110 + tristate "cy8ctmg110 touchscreen" + depends on I2C + depends on GPIOLIB + help + Say Y here if you have a cy8ctmg110 capacitive touchscreen on + an AAVA device. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cy8ctmg110_ts. + +config TOUCHSCREEN_CYTTSP_CORE + tristate "Cypress TTSP touchscreen" + help + Say Y here if you have a touchscreen using controller from + the Cypress TrueTouch(tm) Standard Product family connected + to your system. You will also need to select appropriate + bus connection below. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_core. + +config TOUCHSCREEN_CYTTSP_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_CYTTSP_CORE && I2C + help + Say Y here if the touchscreen is connected via I2C bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_i2c. + +config TOUCHSCREEN_CYTTSP_SPI + tristate "support SPI bus connection" + depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER + help + Say Y here if the touchscreen is connected via SPI bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_spi. + +config TOUCHSCREEN_DA9034 + tristate "Touchscreen support for Dialog Semiconductor DA9034" + depends on PMIC_DA903X + default y + help + Say Y here to enable the support for the touchscreen found + on Dialog Semiconductor DA9034 PMIC. + +config TOUCHSCREEN_DYNAPRO + tristate "Dynapro serial touchscreen" + select SERIO + help + Say Y here if you have a Dynapro serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called dynapro. + +config TOUCHSCREEN_HAMPSHIRE + tristate "Hampshire serial touchscreen" + select SERIO + help + Say Y here if you have a Hampshire serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hampshire. + +config TOUCHSCREEN_EETI + tristate "EETI touchscreen panel support" + depends on I2C + help + Say Y here to enable support for I2C connected EETI touch panels. + + To compile this driver as a module, choose M here: the + module will be called eeti_ts. + +config TOUCHSCREEN_EGALAX + tristate "EETI eGalax multi-touch panel support" + depends on I2C + help + Say Y here to enable support for I2C connected EETI + eGalax multi-touch panels. + + To compile this driver as a module, choose M here: the + module will be called egalax_ts. + +config TOUCHSCREEN_FUJITSU + tristate "Fujitsu serial touchscreen" + select SERIO + help + Say Y here if you have the Fujitsu touchscreen (such as one + installed in Lifebook P series laptop) connected to your + system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called fujitsu-ts. + +config TOUCHSCREEN_ILI210X + tristate "Ilitek ILI210X based touchscreen" + depends on I2C + help + Say Y here if you have a ILI210X based touchscreen + controller. This driver supports models ILI2102, + ILI2102s, ILI2103, ILI2103s and ILI2105. + Such kind of chipsets can be found in Amazon Kindle Fire + touchscreens. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ili210x. + +config TOUCHSCREEN_S3C2410 + tristate "Samsung S3C2410/generic touchscreen input driver" + depends on ARCH_S3C24XX || SAMSUNG_DEV_TS + select S3C_ADC + help + Say Y here if you have the s3c2410 touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called s3c2410_ts. + +config TOUCHSCREEN_GUNZE + tristate "Gunze AHL-51S touchscreen" + select SERIO + help + Say Y here if you have the Gunze AHL-51 touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called gunze. + +config TOUCHSCREEN_ELO + tristate "Elo serial touchscreens" + select SERIO + help + Say Y here if you have an Elo serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called elo. + +config TOUCHSCREEN_WACOM_W8001 + tristate "Wacom W8001 penabled serial touchscreen" + select SERIO + help + Say Y here if you have an Wacom W8001 penabled serial touchscreen + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called wacom_w8001. + +config TOUCHSCREEN_LPC32XX + tristate "LPC32XX touchscreen controller" + depends on ARCH_LPC32XX + help + Say Y here if you have a LPC32XX device and want + to support the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called lpc32xx_ts. + +config TOUCHSCREEN_MAX11801 + tristate "MAX11801 based touchscreens" + depends on I2C + help + Say Y here if you have a MAX11801 based touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called max11801_ts. + +config TOUCHSCREEN_MCS5000 + tristate "MELFAS MCS-5000 touchscreen" + depends on I2C + help + Say Y here if you have the MELFAS MCS-5000 touchscreen controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mcs5000_ts. + +config TOUCHSCREEN_MTOUCH + tristate "MicroTouch serial touchscreens" + select SERIO + help + Say Y here if you have a MicroTouch (3M) serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mtouch. + +config TOUCHSCREEN_INEXIO + tristate "iNexio serial touchscreens" + select SERIO + help + Say Y here if you have an iNexio serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called inexio. + +config TOUCHSCREEN_INTEL_MID + tristate "Intel MID platform resistive touchscreen" + depends on INTEL_SCU_IPC + help + Say Y here if you have a Intel MID based touchscreen in + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called intel_mid_touch. + +config TOUCHSCREEN_MK712 + tristate "ICS MicroClock MK712 touchscreen" + help + Say Y here if you have the ICS MicroClock MK712 touchscreen + controller chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mk712. + +config TOUCHSCREEN_HP600 + tristate "HP Jornada 6xx touchscreen" + depends on SH_HP6XX && SH_ADC + help + Say Y here if you have a HP Jornada 620/660/680/690 and want to + support the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called hp680_ts_input. + +config TOUCHSCREEN_HP7XX + tristate "HP Jornada 7xx touchscreen" + depends on SA1100_JORNADA720_SSP + help + Say Y here if you have a HP Jornada 710/720/728 and want + to support the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called jornada720_ts. + +config TOUCHSCREEN_HTCPEN + tristate "HTC Shift X9500 touchscreen" + depends on ISA + help + Say Y here if you have an HTC Shift UMPC also known as HTC X9500 + Clio / Shangrila and want to support the built-in touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called htcpen. + +config TOUCHSCREEN_PENMOUNT + tristate "Penmount serial touchscreen" + select SERIO + help + Say Y here if you have a Penmount serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called penmount. + +config TOUCHSCREEN_MIGOR + tristate "Renesas MIGO-R touchscreen" + depends on SH_MIGOR && I2C + help + Say Y here to enable MIGO-R touchscreen support. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called migor_ts. + +config TOUCHSCREEN_TNETV107X + tristate "TI TNETV107X touchscreen support" + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here if you want to use the TNETV107X touchscreen. + + To compile this driver as a module, choose M here: the + module will be called tnetv107x-ts. + +config TOUCHSCREEN_SYNAPTICS_I2C_RMI + tristate "Synaptics i2c touchscreen" + depends on I2C + help + This enables support for Synaptics RMI over I2C based touchscreens. + +config TOUCHSCREEN_TOUCHRIGHT + tristate "Touchright serial touchscreen" + select SERIO + help + Say Y here if you have a Touchright serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called touchright. + +config TOUCHSCREEN_TOUCHWIN + tristate "Touchwin serial touchscreen" + select SERIO + help + Say Y here if you have a Touchwin serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called touchwin. + +config TOUCHSCREEN_TI_TSCADC + tristate "TI Touchscreen Interface" + depends on ARCH_OMAP2PLUS + help + Say Y here if you have 4/5/8 wire touchscreen controller + to be connected to the ADC controller on your TI AM335x SoC. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ti_tscadc. + +config TOUCHSCREEN_ATMEL_TSADCC + tristate "Atmel Touchscreen Interface" + depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + help + Say Y here if you have a 4-wire touchscreen connected to the + ADC Controller on your Atmel SoC (such as the AT91SAM9RL). + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called atmel_tsadcc. + +config TOUCHSCREEN_UCB1400 + tristate "Philips UCB1400 touchscreen" + depends on AC97_BUS + depends on UCB1400_CORE + help + This enables support for the Philips UCB1400 touchscreen interface. + The UCB1400 is an AC97 audio codec. The touchscreen interface + will be initialized only after the ALSA subsystem has been + brought up and the UCB1400 detected. You therefore have to + configure ALSA support as well (either built-in or modular, + independently of whether this driver is itself built-in or + modular) for this driver to work. + + To compile this driver as a module, choose M here: the + module will be called ucb1400_ts. + +config TOUCHSCREEN_PIXCIR + tristate "PIXCIR I2C touchscreens" + depends on I2C + help + Say Y here if you have a pixcir i2c touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called pixcir_i2c_ts. + +config TOUCHSCREEN_WM831X + tristate "Support for WM831x touchscreen controllers" + depends on MFD_WM831X + help + This enables support for the touchscreen controller on the WM831x + series of PMICs. + + To compile this driver as a module, choose M here: the + module will be called wm831x-ts. + +config TOUCHSCREEN_WM97XX + tristate "Support for WM97xx AC97 touchscreen controllers" + depends on AC97_BUS + help + Say Y here if you have a Wolfson Microelectronics WM97xx + touchscreen connected to your system. Note that this option + only enables core driver, you will also need to select + support for appropriate chip below. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called wm97xx-ts. + +config TOUCHSCREEN_WM9705 + bool "WM9705 Touchscreen interface support" + depends on TOUCHSCREEN_WM97XX + default y + help + Say Y here to enable support for the Wolfson Microelectronics + WM9705 touchscreen controller. + +config TOUCHSCREEN_WM9712 + bool "WM9712 Touchscreen interface support" + depends on TOUCHSCREEN_WM97XX + default y + help + Say Y here to enable support for the Wolfson Microelectronics + WM9712 touchscreen controller. + +config TOUCHSCREEN_WM9713 + bool "WM9713 Touchscreen interface support" + depends on TOUCHSCREEN_WM97XX + default y + help + Say Y here to enable support for the Wolfson Microelectronics + WM9713 touchscreen controller. + +config TOUCHSCREEN_WM97XX_ATMEL + tristate "WM97xx Atmel accelerated touch" + depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91) + help + Say Y here for support for streaming mode with WM97xx touchscreens + on Atmel AT91 or AVR32 systems with an AC97C module. + + Be aware that this will use channel B in the controller for + streaming data, this must not conflict with other AC97C drivers. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will + be called atmel-wm97xx. + +config TOUCHSCREEN_WM97XX_MAINSTONE + tristate "WM97xx Mainstone/Palm accelerated touch" + depends on TOUCHSCREEN_WM97XX && ARCH_PXA + help + Say Y here for support for streaming mode with WM97xx touchscreens + on Mainstone, Palm Tungsten T5, TX and LifeDrive systems. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mainstone-wm97xx. + +config TOUCHSCREEN_WM97XX_ZYLONITE + tristate "Zylonite accelerated touch" + depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE + select TOUCHSCREEN_WM9713 + help + Say Y here for support for streaming mode with the touchscreen + on Zylonite systems. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called zylonite-wm97xx. + +config TOUCHSCREEN_USB_COMPOSITE + tristate "USB Touchscreen Driver" + depends on USB_ARCH_HAS_HCD + select USB + help + USB Touchscreen driver for: + - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) + - PanJit TouchSet USB + - 3M MicroTouch USB (EX II series) + - ITM + - some other eTurboTouch + - Gunze AHL61 + - DMC TSC-10/25 + - IRTOUCHSYSTEMS/UNITOP + - IdealTEK URTC1000 + - GoTop Super_Q2/GogoPen/PenPower tablets + - JASTEC USB Touch Controller/DigiTech DTR-02U + - Zytronic controllers + - Elo TouchSystems 2700 IntelliTouch + - EasyTouch USB Touch Controller from Data Modul + + Have a look at <http://linux.chapter7.ch/touchkit/> for + a usage description and the required user-space stuff. + + To compile this driver as a module, choose M here: the + module will be called usbtouchscreen. + +config TOUCHSCREEN_MC13783 + tristate "Freescale MC13783 touchscreen input driver" + depends on MFD_MC13783 + help + Say Y here if you have an Freescale MC13783 PMIC on your + board and want to use its touchscreen + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mc13783_ts. + +config TOUCHSCREEN_USB_EGALAX + default y + bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_PANJIT + default y + bool "PanJit device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_3M + default y + bool "3M/Microtouch EX II series device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ITM + default y + bool "ITM device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ETURBO + default y + bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_GUNZE + default y + bool "Gunze AHL61 device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_DMC_TSC10 + default y + bool "DMC TSC-10/25 device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_IRTOUCH + default y + bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_IDEALTEK + default y + bool "IdealTEK URTC1000 device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_GENERAL_TOUCH + default y + bool "GeneralTouch Touchscreen device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_GOTOP + default y + bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_JASTEC + default y + bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ELO + default y + bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_E2I + default y + bool "e2i Touchscreen controller (e.g. from Mimo 740)" + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ZYTRONIC + default y + bool "Zytronic controller" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ETT_TC45USB + default y + bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_NEXIO + default y + bool "NEXIO/iNexio device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_EASYTOUCH + default y + bool "EasyTouch USB Touch controller device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + help + Say Y here if you have a EasyTouch USB Touch controller device support. + If unsure, say N. + +config TOUCHSCREEN_TOUCHIT213 + tristate "Sahara TouchIT-213 touchscreen" + select SERIO + help + Say Y here if you have a Sahara TouchIT-213 Tablet PC. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called touchit213. + +config TOUCHSCREEN_TSC_SERIO + tristate "TSC-10/25/40 serial touchscreen support" + select SERIO + help + Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected + to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tsc40. + +config TOUCHSCREEN_TSC2005 + tristate "TSC2005 based touchscreens" + depends on SPI_MASTER && GENERIC_HARDIRQS + help + Say Y here if you have a TSC2005 based touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tsc2005. + +config TOUCHSCREEN_TSC2007 + tristate "TSC2007 based touchscreens" + depends on I2C + help + Say Y here if you have a TSC2007 based touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tsc2007. + +config TOUCHSCREEN_W90X900 + tristate "W90P910 touchscreen driver" + depends on HAVE_CLK + help + Say Y here if you have a W90P910 based touchscreen. + + To compile this driver as a module, choose M here: the + module will be called w90p910_ts. + +config TOUCHSCREEN_PCAP + tristate "Motorola PCAP touchscreen" + depends on EZX_PCAP + help + Say Y here if you have a Motorola EZX telephone and + want to enable support for the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called pcap_ts. + +config TOUCHSCREEN_ST1232 + tristate "Sitronix ST1232 touchscreen controllers" + depends on I2C + help + Say Y here if you want to support Sitronix ST1232 + touchscreen controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called st1232_ts. + +config TOUCHSCREEN_STMPE + tristate "STMicroelectronics STMPE touchscreens" + depends on MFD_STMPE + help + Say Y here if you want support for STMicroelectronics + STMPE touchscreen controllers. + + To compile this driver as a module, choose M here: the + module will be called stmpe-ts. + +config TOUCHSCREEN_TPS6507X + tristate "TPS6507x based touchscreens" + depends on I2C + help + Say Y here if you have a TPS6507x based touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tps6507x_ts. + +endif diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/Makefile b/ANDROID_3.4.5/drivers/input/touchscreen/Makefile new file mode 100644 index 00000000..175d6414 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/Makefile @@ -0,0 +1,72 @@ +# +# Makefile for the touchscreen drivers. +# + +# Each configuration option enables a list of files. + +wm97xx-ts-y := wm97xx-core.o + +obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o +obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o +obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o +obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o +obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o +obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o +obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o +obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o +obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o +obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o +obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o +obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o +obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o +obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o +obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o +obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o +obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o +obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o +obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o +obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o +obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o +obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o +obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o +obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o +obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o +obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o +obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o +obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o +obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o +obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o +obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o +obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o +obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o +obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o +obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o +obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o +obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o +obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o +obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o +obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI) += synaptics_i2c_rmi.o +obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o +obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o +obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o +obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o +obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o +obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o +obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o +obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o +obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o +wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o +wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o +wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o +obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o +obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o +obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o +obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o +obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ad7877.c b/ANDROID_3.4.5/drivers/input/touchscreen/ad7877.c new file mode 100644 index 00000000..2c769210 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ad7877.c @@ -0,0 +1,868 @@ +/* + * Copyright (C) 2006-2008 Michael Hennerich, Analog Devices Inc. + * + * Description: AD7877 based touchscreen, sensor (ADCs), DAC and GPIO driver + * Based on: ads7846.c + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak <imre.deak@nokia.com> + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + */ + + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/spi/ad7877.h> +#include <linux/module.h> +#include <asm/irq.h> + +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(100) + +#define MAX_SPI_FREQ_HZ 20000000 +#define MAX_12BIT ((1<<12)-1) + +#define AD7877_REG_ZEROS 0 +#define AD7877_REG_CTRL1 1 +#define AD7877_REG_CTRL2 2 +#define AD7877_REG_ALERT 3 +#define AD7877_REG_AUX1HIGH 4 +#define AD7877_REG_AUX1LOW 5 +#define AD7877_REG_BAT1HIGH 6 +#define AD7877_REG_BAT1LOW 7 +#define AD7877_REG_BAT2HIGH 8 +#define AD7877_REG_BAT2LOW 9 +#define AD7877_REG_TEMP1HIGH 10 +#define AD7877_REG_TEMP1LOW 11 +#define AD7877_REG_SEQ0 12 +#define AD7877_REG_SEQ1 13 +#define AD7877_REG_DAC 14 +#define AD7877_REG_NONE1 15 +#define AD7877_REG_EXTWRITE 15 +#define AD7877_REG_XPLUS 16 +#define AD7877_REG_YPLUS 17 +#define AD7877_REG_Z2 18 +#define AD7877_REG_aux1 19 +#define AD7877_REG_aux2 20 +#define AD7877_REG_aux3 21 +#define AD7877_REG_bat1 22 +#define AD7877_REG_bat2 23 +#define AD7877_REG_temp1 24 +#define AD7877_REG_temp2 25 +#define AD7877_REG_Z1 26 +#define AD7877_REG_GPIOCTRL1 27 +#define AD7877_REG_GPIOCTRL2 28 +#define AD7877_REG_GPIODATA 29 +#define AD7877_REG_NONE2 30 +#define AD7877_REG_NONE3 31 + +#define AD7877_SEQ_YPLUS_BIT (1<<11) +#define AD7877_SEQ_XPLUS_BIT (1<<10) +#define AD7877_SEQ_Z2_BIT (1<<9) +#define AD7877_SEQ_AUX1_BIT (1<<8) +#define AD7877_SEQ_AUX2_BIT (1<<7) +#define AD7877_SEQ_AUX3_BIT (1<<6) +#define AD7877_SEQ_BAT1_BIT (1<<5) +#define AD7877_SEQ_BAT2_BIT (1<<4) +#define AD7877_SEQ_TEMP1_BIT (1<<3) +#define AD7877_SEQ_TEMP2_BIT (1<<2) +#define AD7877_SEQ_Z1_BIT (1<<1) + +enum { + AD7877_SEQ_YPOS = 0, + AD7877_SEQ_XPOS = 1, + AD7877_SEQ_Z2 = 2, + AD7877_SEQ_AUX1 = 3, + AD7877_SEQ_AUX2 = 4, + AD7877_SEQ_AUX3 = 5, + AD7877_SEQ_BAT1 = 6, + AD7877_SEQ_BAT2 = 7, + AD7877_SEQ_TEMP1 = 8, + AD7877_SEQ_TEMP2 = 9, + AD7877_SEQ_Z1 = 10, + AD7877_NR_SENSE = 11, +}; + +/* DAC Register Default RANGE 0 to Vcc, Volatge Mode, DAC On */ +#define AD7877_DAC_CONF 0x1 + +/* If gpio3 is set AUX3/GPIO3 acts as GPIO Output */ +#define AD7877_EXTW_GPIO_3_CONF 0x1C4 +#define AD7877_EXTW_GPIO_DATA 0x200 + +/* Control REG 2 */ +#define AD7877_TMR(x) ((x & 0x3) << 0) +#define AD7877_REF(x) ((x & 0x1) << 2) +#define AD7877_POL(x) ((x & 0x1) << 3) +#define AD7877_FCD(x) ((x & 0x3) << 4) +#define AD7877_PM(x) ((x & 0x3) << 6) +#define AD7877_ACQ(x) ((x & 0x3) << 8) +#define AD7877_AVG(x) ((x & 0x3) << 10) + +/* Control REG 1 */ +#define AD7877_SER (1 << 11) /* non-differential */ +#define AD7877_DFR (0 << 11) /* differential */ + +#define AD7877_MODE_NOC (0) /* Do not convert */ +#define AD7877_MODE_SCC (1) /* Single channel conversion */ +#define AD7877_MODE_SEQ0 (2) /* Sequence 0 in Slave Mode */ +#define AD7877_MODE_SEQ1 (3) /* Sequence 1 in Master Mode */ + +#define AD7877_CHANADD(x) ((x&0xF)<<7) +#define AD7877_READADD(x) ((x)<<2) +#define AD7877_WRITEADD(x) ((x)<<12) + +#define AD7877_READ_CHAN(x) (AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_SER | \ + AD7877_MODE_SCC | AD7877_CHANADD(AD7877_REG_ ## x) | \ + AD7877_READADD(AD7877_REG_ ## x)) + +#define AD7877_MM_SEQUENCE (AD7877_SEQ_YPLUS_BIT | AD7877_SEQ_XPLUS_BIT | \ + AD7877_SEQ_Z2_BIT | AD7877_SEQ_Z1_BIT) + +/* + * Non-touchscreen sensors only use single-ended conversions. + */ + +struct ser_req { + u16 reset; + u16 ref_on; + u16 command; + struct spi_message msg; + struct spi_transfer xfer[6]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u16 sample ____cacheline_aligned; +}; + +struct ad7877 { + struct input_dev *input; + char phys[32]; + + struct spi_device *spi; + u16 model; + u16 vref_delay_usecs; + u16 x_plate_ohms; + u16 pressure_max; + + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_dummy; + u16 dac; + + u8 stopacq_polarity; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + + struct spi_transfer xfer[AD7877_NR_SENSE + 2]; + struct spi_message msg; + + struct mutex mutex; + bool disabled; /* P: mutex */ + bool gpio3; /* P: mutex */ + bool gpio4; /* P: mutex */ + + spinlock_t lock; + struct timer_list timer; /* P: lock */ + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned; +}; + +static bool gpio3; +module_param(gpio3, bool, 0); +MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3"); + +/* + * ad7877_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done using spi_async() in the interrupt handler. + */ + +static int ad7877_read(struct spi_device *spi, u16 reg) +{ + struct ser_req *req; + int status, ret; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) (AD7877_WRITEADD(AD7877_REG_CTRL1) | + AD7877_READADD(reg)); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + req->xfer[0].cs_change = 1; + + req->xfer[1].rx_buf = &req->sample; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + ret = status ? : req->sample; + + kfree(req); + + return ret; +} + +static int ad7877_write(struct spi_device *spi, u16 reg, u16 val) +{ + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) (AD7877_WRITEADD(reg) | (val & MAX_12BIT)); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + + status = spi_sync(spi, &req->msg); + + kfree(req); + + return status; +} + +static int ad7877_read_adc(struct spi_device *spi, unsigned command) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + struct ser_req *req; + int status; + int sample; + int i; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + /* activate reference, so it has time to settle; */ + req->ref_on = AD7877_WRITEADD(AD7877_REG_CTRL2) | + AD7877_POL(ts->stopacq_polarity) | + AD7877_AVG(0) | AD7877_PM(2) | AD7877_TMR(0) | + AD7877_ACQ(ts->acquisition_time) | AD7877_FCD(0); + + req->reset = AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_MODE_NOC; + + req->command = (u16) command; + + req->xfer[0].tx_buf = &req->reset; + req->xfer[0].len = 2; + req->xfer[0].cs_change = 1; + + req->xfer[1].tx_buf = &req->ref_on; + req->xfer[1].len = 2; + req->xfer[1].delay_usecs = ts->vref_delay_usecs; + req->xfer[1].cs_change = 1; + + req->xfer[2].tx_buf = &req->command; + req->xfer[2].len = 2; + req->xfer[2].delay_usecs = ts->vref_delay_usecs; + req->xfer[2].cs_change = 1; + + req->xfer[3].rx_buf = &req->sample; + req->xfer[3].len = 2; + req->xfer[3].cs_change = 1; + + req->xfer[4].tx_buf = &ts->cmd_crtl2; /*REF OFF*/ + req->xfer[4].len = 2; + req->xfer[4].cs_change = 1; + + req->xfer[5].tx_buf = &ts->cmd_crtl1; /*DEFAULT*/ + req->xfer[5].len = 2; + + /* group all the transfers together, so we can't interfere with + * reading touchscreen state; disable penirq while sampling + */ + for (i = 0; i < 6; i++) + spi_message_add_tail(&req->xfer[i], &req->msg); + + status = spi_sync(spi, &req->msg); + sample = req->sample; + + kfree(req); + + return status ? : sample; +} + +static int ad7877_process_data(struct ad7877 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7877_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7877_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7877_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7877_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7877. + * The preprocessing function consists of an averaging filter. + * The combination of 'first conversion delay' and averaging provides a robust solution, + * discarding the spurious noise in the signal and keeping only the data of interest. + * The size of the averaging filter is programmable. (dev.platform_data, see linux/spi/ad7877.h) + * Other user-programmable conversion controls include variable acquisition time, + * and first conversion delay. Up to 16 averages can be taken per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + /* + * Sample found inconsistent, pressure is beyond + * the maximum. Don't report it to user space. + */ + if (Rt > ts->pressure_max) + return -EINVAL; + + if (!timer_pending(&ts->timer)) + input_report_key(input_dev, BTN_TOUCH, 1); + + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); + input_sync(input_dev); + + return 0; + } + + return -EINVAL; +} + +static inline void ad7877_ts_event_release(struct ad7877 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_report_key(input_dev, BTN_TOUCH, 0); + input_sync(input_dev); +} + +static void ad7877_timer(unsigned long handle) +{ + struct ad7877 *ts = (void *)handle; + unsigned long flags; + + spin_lock_irqsave(&ts->lock, flags); + ad7877_ts_event_release(ts); + spin_unlock_irqrestore(&ts->lock, flags); +} + +static irqreturn_t ad7877_irq(int irq, void *handle) +{ + struct ad7877 *ts = handle; + unsigned long flags; + int error; + + error = spi_sync(ts->spi, &ts->msg); + if (error) { + dev_err(&ts->spi->dev, "spi_sync --> %d\n", error); + goto out; + } + + spin_lock_irqsave(&ts->lock, flags); + error = ad7877_process_data(ts); + if (!error) + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); + spin_unlock_irqrestore(&ts->lock, flags); + +out: + return IRQ_HANDLED; +} + +static void ad7877_disable(struct ad7877 *ts) +{ + mutex_lock(&ts->mutex); + + if (!ts->disabled) { + ts->disabled = true; + disable_irq(ts->spi->irq); + + if (del_timer_sync(&ts->timer)) + ad7877_ts_event_release(ts); + } + + /* + * We know the chip's in lowpower mode since we always + * leave it that way after every request + */ + + mutex_unlock(&ts->mutex); +} + +static void ad7877_enable(struct ad7877 *ts) +{ + mutex_lock(&ts->mutex); + + if (ts->disabled) { + ts->disabled = false; + enable_irq(ts->spi->irq); + } + + mutex_unlock(&ts->mutex); +} + +#define SHOW(name) static ssize_t \ +name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct ad7877 *ts = dev_get_drvdata(dev); \ + ssize_t v = ad7877_read_adc(ts->spi, \ + AD7877_READ_CHAN(name)); \ + if (v < 0) \ + return v; \ + return sprintf(buf, "%u\n", (unsigned) v); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL); + +SHOW(aux1) +SHOW(aux2) +SHOW(aux3) +SHOW(bat1) +SHOW(bat2) +SHOW(temp1) +SHOW(temp2) + +static ssize_t ad7877_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7877_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned int val; + int error; + + error = kstrtouint(buf, 10, &val); + if (error) + return error; + + if (val) + ad7877_disable(ts); + else + ad7877_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store); + +static ssize_t ad7877_dac_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->dac); +} + +static ssize_t ad7877_dac_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned int val; + int error; + + error = kstrtouint(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->dac = val & 0xFF; + ad7877_write(ts->spi, AD7877_REG_DAC, (ts->dac << 4) | AD7877_DAC_CONF); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store); + +static ssize_t ad7877_gpio3_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio3); +} + +static ssize_t ad7877_gpio3_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned int val; + int error; + + error = kstrtouint(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio3 = !!val; + ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA | + (ts->gpio4 << 4) | (ts->gpio3 << 5)); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store); + +static ssize_t ad7877_gpio4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio4); +} + +static ssize_t ad7877_gpio4_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned int val; + int error; + + error = kstrtouint(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio4 = !!val; + ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA | + (ts->gpio4 << 4) | (ts->gpio3 << 5)); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(gpio4, 0664, ad7877_gpio4_show, ad7877_gpio4_store); + +static struct attribute *ad7877_attributes[] = { + &dev_attr_temp1.attr, + &dev_attr_temp2.attr, + &dev_attr_aux1.attr, + &dev_attr_aux2.attr, + &dev_attr_aux3.attr, + &dev_attr_bat1.attr, + &dev_attr_bat2.attr, + &dev_attr_disable.attr, + &dev_attr_dac.attr, + &dev_attr_gpio3.attr, + &dev_attr_gpio4.attr, + NULL +}; + +static umode_t ad7877_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + umode_t mode = attr->mode; + + if (attr == &dev_attr_aux3.attr) { + if (gpio3) + mode = 0; + } else if (attr == &dev_attr_gpio3.attr) { + if (!gpio3) + mode = 0; + } + + return mode; +} + +static const struct attribute_group ad7877_attr_group = { + .is_visible = ad7877_attr_is_visible, + .attrs = ad7877_attributes, +}; + +static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts) +{ + struct spi_message *m; + int i; + + ts->cmd_crtl2 = AD7877_WRITEADD(AD7877_REG_CTRL2) | + AD7877_POL(ts->stopacq_polarity) | + AD7877_AVG(ts->averaging) | AD7877_PM(1) | + AD7877_TMR(ts->pen_down_acc_interval) | + AD7877_ACQ(ts->acquisition_time) | + AD7877_FCD(ts->first_conversion_delay); + + ad7877_write(spi, AD7877_REG_CTRL2, ts->cmd_crtl2); + + ts->cmd_crtl1 = AD7877_WRITEADD(AD7877_REG_CTRL1) | + AD7877_READADD(AD7877_REG_XPLUS-1) | + AD7877_MODE_SEQ1 | AD7877_DFR; + + ad7877_write(spi, AD7877_REG_CTRL1, ts->cmd_crtl1); + + ts->cmd_dummy = 0; + + m = &ts->msg; + + spi_message_init(m); + + m->context = ts; + + ts->xfer[0].tx_buf = &ts->cmd_crtl1; + ts->xfer[0].len = 2; + ts->xfer[0].cs_change = 1; + + spi_message_add_tail(&ts->xfer[0], m); + + ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */ + ts->xfer[1].len = 2; + ts->xfer[1].cs_change = 1; + + spi_message_add_tail(&ts->xfer[1], m); + + for (i = 0; i < AD7877_NR_SENSE; i++) { + ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i]; + ts->xfer[i + 2].len = 2; + if (i < (AD7877_NR_SENSE - 1)) + ts->xfer[i + 2].cs_change = 1; + spi_message_add_tail(&ts->xfer[i + 2], m); + } +} + +static int __devinit ad7877_probe(struct spi_device *spi) +{ + struct ad7877 *ts; + struct input_dev *input_dev; + struct ad7877_platform_data *pdata = spi->dev.platform_data; + int err; + u16 verify; + + if (!spi->irq) { + dev_dbg(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz); + return -EINVAL; + } + + spi->bits_per_word = 16; + err = spi_setup(spi); + if (err) { + dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n"); + return err; + } + + ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + dev_set_drvdata(&spi->dev, ts); + ts->spi = spi; + ts->input = input_dev; + + setup_timer(&ts->timer, ad7877_timer, (unsigned long) ts); + mutex_init(&ts->mutex); + spin_lock_init(&ts->lock); + + ts->model = pdata->model ? : 7877; + ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->stopacq_polarity = pdata->stopacq_polarity; + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); + + input_dev->name = "AD7877 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = &spi->dev; + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE); + + verify = ad7877_read(spi, AD7877_REG_SEQ1); + + if (verify != AD7877_MM_SEQUENCE){ + dev_err(&spi->dev, "%s: Failed to probe %s\n", + dev_name(&spi->dev), input_dev->name); + err = -ENODEV; + goto err_free_mem; + } + + if (gpio3) + ad7877_write(spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_3_CONF); + + ad7877_setup_ts_def_msg(spi, ts); + + /* Request AD7877 /DAV GPIO interrupt */ + + err = request_threaded_irq(spi->irq, NULL, ad7877_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + spi->dev.driver->name, ts); + if (err) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + goto err_free_mem; + } + + err = sysfs_create_group(&spi->dev.kobj, &ad7877_attr_group); + if (err) + goto err_free_irq; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr_group; + + return 0; + +err_remove_attr_group: + sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); +err_free_irq: + free_irq(spi->irq, ts); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + dev_set_drvdata(&spi->dev, NULL); + return err; +} + +static int __devexit ad7877_remove(struct spi_device *spi) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); + + ad7877_disable(ts); + free_irq(ts->spi->irq, ts); + + input_unregister_device(ts->input); + kfree(ts); + + dev_dbg(&spi->dev, "unregistered touchscreen\n"); + dev_set_drvdata(&spi->dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ad7877_suspend(struct device *dev) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + ad7877_disable(ts); + + return 0; +} + +static int ad7877_resume(struct device *dev) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + ad7877_enable(ts); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume); + +static struct spi_driver ad7877_driver = { + .driver = { + .name = "ad7877", + .owner = THIS_MODULE, + .pm = &ad7877_pm, + }, + .probe = ad7877_probe, + .remove = __devexit_p(ad7877_remove), +}; + +module_spi_driver(ad7877_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7877 touchscreen Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ad7877"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ad7879-i2c.c b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879-i2c.c new file mode 100644 index 00000000..3054354d --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879-i2c.c @@ -0,0 +1,109 @@ +/* + * AD7879-1/AD7889-1 touchscreen (I2C bus) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/input.h> /* BUS_I2C */ +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pm.h> + +#include "ad7879.h" + +#define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */ + +/* All registers are word-sized. + * AD7879 uses a high-byte first convention. + */ +static int ad7879_i2c_read(struct device *dev, u8 reg) +{ + struct i2c_client *client = to_i2c_client(dev); + + return i2c_smbus_read_word_swapped(client, reg); +} + +static int ad7879_i2c_multi_read(struct device *dev, + u8 first_reg, u8 count, u16 *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + u8 idx; + + i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf); + + for (idx = 0; idx < count; ++idx) + buf[idx] = swab16(buf[idx]); + + return 0; +} + +static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val) +{ + struct i2c_client *client = to_i2c_client(dev); + + return i2c_smbus_write_word_swapped(client, reg, val); +} + +static const struct ad7879_bus_ops ad7879_i2c_bus_ops = { + .bustype = BUS_I2C, + .read = ad7879_i2c_read, + .multi_read = ad7879_i2c_multi_read, + .write = ad7879_i2c_write, +}; + +static int __devinit ad7879_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ad7879 *ts; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq, + &ad7879_i2c_bus_ops); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + i2c_set_clientdata(client, ts); + + return 0; +} + +static int __devexit ad7879_i2c_remove(struct i2c_client *client) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_remove(ts); + + return 0; +} + +static const struct i2c_device_id ad7879_id[] = { + { "ad7879", 0 }, + { "ad7889", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7879_id); + +static struct i2c_driver ad7879_i2c_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + .pm = &ad7879_pm_ops, + }, + .probe = ad7879_i2c_probe, + .remove = __devexit_p(ad7879_i2c_remove), + .id_table = ad7879_id, +}; + +module_i2c_driver(ad7879_i2c_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ad7879-spi.c b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879-spi.c new file mode 100644 index 00000000..db49abf0 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879-spi.c @@ -0,0 +1,165 @@ +/* + * AD7879/AD7889 touchscreen (SPI bus) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/input.h> /* BUS_SPI */ +#include <linux/pm.h> +#include <linux/spi/spi.h> +#include <linux/module.h> + +#include "ad7879.h" + +#define AD7879_DEVID 0x7A /* AD7879/AD7889 */ + +#define MAX_SPI_FREQ_HZ 5000000 +#define AD7879_CMD_MAGIC 0xE000 +#define AD7879_CMD_READ (1 << 10) +#define AD7879_CMD(reg) (AD7879_CMD_MAGIC | ((reg) & 0xF)) +#define AD7879_WRITECMD(reg) (AD7879_CMD(reg)) +#define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ) + +/* + * ad7879_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done in ad7879_collect(). + */ + +static int ad7879_spi_xfer(struct spi_device *spi, + u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf) +{ + struct spi_message msg; + struct spi_transfer *xfers; + void *spi_data; + u16 *command; + u16 *_rx_buf = _rx_buf; /* shut gcc up */ + u8 idx; + int ret; + + xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL); + if (!spi_data) + return -ENOMEM; + + spi_message_init(&msg); + + command = spi_data; + command[0] = cmd; + if (count == 1) { + /* ad7879_spi_{read,write} gave us buf on stack */ + command[1] = *tx_buf; + tx_buf = &command[1]; + _rx_buf = rx_buf; + rx_buf = &command[2]; + } + + ++xfers; + xfers[0].tx_buf = command; + xfers[0].len = 2; + spi_message_add_tail(&xfers[0], &msg); + ++xfers; + + for (idx = 0; idx < count; ++idx) { + if (rx_buf) + xfers[idx].rx_buf = &rx_buf[idx]; + if (tx_buf) + xfers[idx].tx_buf = &tx_buf[idx]; + xfers[idx].len = 2; + spi_message_add_tail(&xfers[idx], &msg); + } + + ret = spi_sync(spi, &msg); + + if (count == 1) + _rx_buf[0] = command[2]; + + kfree(spi_data); + + return ret; +} + +static int ad7879_spi_multi_read(struct device *dev, + u8 first_reg, u8 count, u16 *buf) +{ + struct spi_device *spi = to_spi_device(dev); + + return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf); +} + +static int ad7879_spi_read(struct device *dev, u8 reg) +{ + struct spi_device *spi = to_spi_device(dev); + u16 ret, dummy; + + return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret; +} + +static int ad7879_spi_write(struct device *dev, u8 reg, u16 val) +{ + struct spi_device *spi = to_spi_device(dev); + u16 dummy; + + return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy); +} + +static const struct ad7879_bus_ops ad7879_spi_bus_ops = { + .bustype = BUS_SPI, + .read = ad7879_spi_read, + .multi_read = ad7879_spi_multi_read, + .write = ad7879_spi_write, +}; + +static int __devinit ad7879_spi_probe(struct spi_device *spi) +{ + struct ad7879 *ts; + int err; + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); + return -EINVAL; + } + + spi->bits_per_word = 16; + err = spi_setup(spi); + if (err) { + dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n"); + return err; + } + + ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + spi_set_drvdata(spi, ts); + + return 0; +} + +static int __devexit ad7879_spi_remove(struct spi_device *spi) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_remove(ts); + spi_set_drvdata(spi, NULL); + + return 0; +} + +static struct spi_driver ad7879_spi_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + .pm = &ad7879_pm_ops, + }, + .probe = ad7879_spi_probe, + .remove = __devexit_p(ad7879_spi_remove), +}; + +module_spi_driver(ad7879_spi_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ad7879"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ad7879.c b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879.c new file mode 100644 index 00000000..e2482b40 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879.c @@ -0,0 +1,649 @@ +/* + * AD7879/AD7889 based touchscreen and GPIO driver + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak <imre.deak@nokia.com> + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * - ad7877.c + * Copyright (C) 2006-2008 Analog Devices Inc. + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <linux/spi/ad7879.h> +#include <linux/module.h> +#include "ad7879.h" + +#define AD7879_REG_ZEROS 0 +#define AD7879_REG_CTRL1 1 +#define AD7879_REG_CTRL2 2 +#define AD7879_REG_CTRL3 3 +#define AD7879_REG_AUX1HIGH 4 +#define AD7879_REG_AUX1LOW 5 +#define AD7879_REG_TEMP1HIGH 6 +#define AD7879_REG_TEMP1LOW 7 +#define AD7879_REG_XPLUS 8 +#define AD7879_REG_YPLUS 9 +#define AD7879_REG_Z1 10 +#define AD7879_REG_Z2 11 +#define AD7879_REG_AUXVBAT 12 +#define AD7879_REG_TEMP 13 +#define AD7879_REG_REVID 14 + +/* Control REG 1 */ +#define AD7879_TMR(x) ((x & 0xFF) << 0) +#define AD7879_ACQ(x) ((x & 0x3) << 8) +#define AD7879_MODE_NOC (0 << 10) /* Do not convert */ +#define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */ +#define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */ +#define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */ +#define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */ + +/* Control REG 2 */ +#define AD7879_FCD(x) ((x & 0x3) << 0) +#define AD7879_RESET (1 << 4) +#define AD7879_MFS(x) ((x & 0x3) << 5) +#define AD7879_AVG(x) ((x & 0x3) << 7) +#define AD7879_SER (1 << 9) /* non-differential */ +#define AD7879_DFR (0 << 9) /* differential */ +#define AD7879_GPIOPOL (1 << 10) +#define AD7879_GPIODIR (1 << 11) +#define AD7879_GPIO_DATA (1 << 12) +#define AD7879_GPIO_EN (1 << 13) +#define AD7879_PM(x) ((x & 0x3) << 14) +#define AD7879_PM_SHUTDOWN (0) +#define AD7879_PM_DYN (1) +#define AD7879_PM_FULLON (2) + +/* Control REG 3 */ +#define AD7879_TEMPMASK_BIT (1<<15) +#define AD7879_AUXVBATMASK_BIT (1<<14) +#define AD7879_INTMODE_BIT (1<<13) +#define AD7879_GPIOALERTMASK_BIT (1<<12) +#define AD7879_AUXLOW_BIT (1<<11) +#define AD7879_AUXHIGH_BIT (1<<10) +#define AD7879_TEMPLOW_BIT (1<<9) +#define AD7879_TEMPHIGH_BIT (1<<8) +#define AD7879_YPLUS_BIT (1<<7) +#define AD7879_XPLUS_BIT (1<<6) +#define AD7879_Z1_BIT (1<<5) +#define AD7879_Z2_BIT (1<<4) +#define AD7879_AUX_BIT (1<<3) +#define AD7879_VBAT_BIT (1<<2) +#define AD7879_TEMP_BIT (1<<1) + +enum { + AD7879_SEQ_XPOS = 0, + AD7879_SEQ_YPOS = 1, + AD7879_SEQ_Z1 = 2, + AD7879_SEQ_Z2 = 3, + AD7879_NR_SENSE = 4, +}; + +#define MAX_12BIT ((1<<12)-1) +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) + +struct ad7879 { + const struct ad7879_bus_ops *bops; + + struct device *dev; + struct input_dev *input; + struct timer_list timer; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gc; + struct mutex mutex; +#endif + unsigned int irq; + bool disabled; /* P: input->mutex */ + bool suspended; /* P: input->mutex */ + u16 conversion_data[AD7879_NR_SENSE]; + char phys[32]; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + u8 median; + u16 x_plate_ohms; + u16 pressure_max; + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_crtl3; + int x; + int y; + int Rt; +}; + +static int ad7879_read(struct ad7879 *ts, u8 reg) +{ + return ts->bops->read(ts->dev, reg); +} + +static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf) +{ + return ts->bops->multi_read(ts->dev, first_reg, count, buf); +} + +static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val) +{ + return ts->bops->write(ts->dev, reg, val); +} + +static int ad7879_report(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7879. + * The preprocessing function consists of a median and an averaging + * filter. The combination of these two techniques provides a robust + * solution, discarding the spurious noise in the signal and keeping + * only the data of interest. The size of both filters is + * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other + * user-programmable conversion controls include variable acquisition + * time, and first conversion delay. Up to 16 averages can be taken + * per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + /* + * Sample found inconsistent, pressure is beyond + * the maximum. Don't report it to user space. + */ + if (Rt > ts->pressure_max) + return -EINVAL; + + /* + * Note that we delay reporting events by one sample. + * This is done to avoid reporting last sample of the + * touch sequence, which may be incomplete if finger + * leaves the surface before last reading is taken. + */ + if (timer_pending(&ts->timer)) { + /* Touch continues */ + input_report_key(input_dev, BTN_TOUCH, 1); + input_report_abs(input_dev, ABS_X, ts->x); + input_report_abs(input_dev, ABS_Y, ts->y); + input_report_abs(input_dev, ABS_PRESSURE, ts->Rt); + input_sync(input_dev); + } + + ts->x = x; + ts->y = y; + ts->Rt = Rt; + + return 0; + } + + return -EINVAL; +} + +static void ad7879_ts_event_release(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_report_key(input_dev, BTN_TOUCH, 0); + input_sync(input_dev); +} + +static void ad7879_timer(unsigned long handle) +{ + struct ad7879 *ts = (void *)handle; + + ad7879_ts_event_release(ts); +} + +static irqreturn_t ad7879_irq(int irq, void *handle) +{ + struct ad7879 *ts = handle; + + ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data); + + if (!ad7879_report(ts)) + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); + + return IRQ_HANDLED; +} + +static void __ad7879_enable(struct ad7879 *ts) +{ + ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3); + ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1); + + enable_irq(ts->irq); +} + +static void __ad7879_disable(struct ad7879 *ts) +{ + u16 reg = (ts->cmd_crtl2 & ~AD7879_PM(-1)) | + AD7879_PM(AD7879_PM_SHUTDOWN); + disable_irq(ts->irq); + + if (del_timer_sync(&ts->timer)) + ad7879_ts_event_release(ts); + + ad7879_write(ts, AD7879_REG_CTRL2, reg); +} + + +static int ad7879_open(struct input_dev *input) +{ + struct ad7879 *ts = input_get_drvdata(input); + + /* protected by input->mutex */ + if (!ts->disabled && !ts->suspended) + __ad7879_enable(ts); + + return 0; +} + +static void ad7879_close(struct input_dev* input) +{ + struct ad7879 *ts = input_get_drvdata(input); + + /* protected by input->mutex */ + if (!ts->disabled && !ts->suspended) + __ad7879_disable(ts); +} + +#ifdef CONFIG_PM_SLEEP +static int ad7879_suspend(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->input->mutex); + + if (!ts->suspended && !ts->disabled && ts->input->users) + __ad7879_disable(ts); + + ts->suspended = true; + + mutex_unlock(&ts->input->mutex); + + return 0; +} + +static int ad7879_resume(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->input->mutex); + + if (ts->suspended && !ts->disabled && ts->input->users) + __ad7879_enable(ts); + + ts->suspended = false; + + mutex_unlock(&ts->input->mutex); + + return 0; +} +#endif + +SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume); +EXPORT_SYMBOL(ad7879_pm_ops); + +static void ad7879_toggle(struct ad7879 *ts, bool disable) +{ + mutex_lock(&ts->input->mutex); + + if (!ts->suspended && ts->input->users != 0) { + + if (disable) { + if (ts->disabled) + __ad7879_enable(ts); + } else { + if (!ts->disabled) + __ad7879_disable(ts); + } + } + + ts->disabled = disable; + + mutex_unlock(&ts->input->mutex); +} + +static ssize_t ad7879_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7879_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned int val; + int error; + + error = kstrtouint(buf, 10, &val); + if (error) + return error; + + ad7879_toggle(ts, val); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); + +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +#ifdef CONFIG_GPIOLIB +static int ad7879_gpio_direction_input(struct gpio_chip *chip, + unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; + + mutex_lock(&ts->mutex); + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; + err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; + + mutex_lock(&ts->mutex); + ts->cmd_crtl2 &= ~AD7879_GPIODIR; + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL; + if (level) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + u16 val; + + mutex_lock(&ts->mutex); + val = ad7879_read(ts, AD7879_REG_CTRL2); + mutex_unlock(&ts->mutex); + + return !!(val & AD7879_GPIO_DATA); +} + +static void ad7879_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + + mutex_lock(&ts->mutex); + if (value) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); +} + +static int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) +{ + int ret = 0; + + mutex_init(&ts->mutex); + + if (pdata->gpio_export) { + ts->gc.direction_input = ad7879_gpio_direction_input; + ts->gc.direction_output = ad7879_gpio_direction_output; + ts->gc.get = ad7879_gpio_get_value; + ts->gc.set = ad7879_gpio_set_value; + ts->gc.can_sleep = 1; + ts->gc.base = pdata->gpio_base; + ts->gc.ngpio = 1; + ts->gc.label = "AD7879-GPIO"; + ts->gc.owner = THIS_MODULE; + ts->gc.dev = ts->dev; + + ret = gpiochip_add(&ts->gc); + if (ret) + dev_err(ts->dev, "failed to register gpio %d\n", + ts->gc.base); + } + + return ret; +} + +static void ad7879_gpio_remove(struct ad7879 *ts) +{ + const struct ad7879_platform_data *pdata = ts->dev->platform_data; + int ret; + + if (pdata->gpio_export) { + ret = gpiochip_remove(&ts->gc); + if (ret) + dev_err(ts->dev, "failed to remove gpio %d\n", + ts->gc.base); + } +} +#else +static inline int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) +{ + return 0; +} + +static inline void ad7879_gpio_remove(struct ad7879 *ts) +{ +} +#endif + +struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, + const struct ad7879_bus_ops *bops) +{ + struct ad7879_platform_data *pdata = dev->platform_data; + struct ad7879 *ts; + struct input_dev *input_dev; + int err; + u16 revid; + + if (!irq) { + dev_err(dev, "no IRQ?\n"); + err = -EINVAL; + goto err_out; + } + + if (!pdata) { + dev_err(dev, "no platform data?\n"); + err = -EINVAL; + goto err_out; + } + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + ts->bops = bops; + ts->dev = dev; + ts->input = input_dev; + ts->irq = irq; + + setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); + + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + ts->median = pdata->median; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); + + input_dev->name = "AD7879 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = dev; + input_dev->id.bustype = bops->bustype; + + input_dev->open = ad7879_open; + input_dev->close = ad7879_close; + + input_set_drvdata(input_dev, ts); + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET); + if (err < 0) { + dev_err(dev, "Failed to write %s\n", input_dev->name); + goto err_free_mem; + } + + revid = ad7879_read(ts, AD7879_REG_REVID); + input_dev->id.product = (revid & 0xff); + input_dev->id.version = revid >> 8; + if (input_dev->id.product != devid) { + dev_err(dev, "Failed to probe %s (%x vs %x)\n", + input_dev->name, devid, revid); + err = -ENODEV; + goto err_free_mem; + } + + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay); + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + + err = request_threaded_irq(ts->irq, NULL, ad7879_irq, + IRQF_TRIGGER_FALLING, + dev_name(dev), ts); + if (err) { + dev_err(dev, "irq %d busy?\n", ts->irq); + goto err_free_mem; + } + + __ad7879_disable(ts); + + err = sysfs_create_group(&dev->kobj, &ad7879_attr_group); + if (err) + goto err_free_irq; + + err = ad7879_gpio_add(ts, pdata); + if (err) + goto err_remove_attr; + + err = input_register_device(input_dev); + if (err) + goto err_remove_gpio; + + return ts; + +err_remove_gpio: + ad7879_gpio_remove(ts); +err_remove_attr: + sysfs_remove_group(&dev->kobj, &ad7879_attr_group); +err_free_irq: + free_irq(ts->irq, ts); +err_free_mem: + input_free_device(input_dev); + kfree(ts); +err_out: + return ERR_PTR(err); +} +EXPORT_SYMBOL(ad7879_probe); + +void ad7879_remove(struct ad7879 *ts) +{ + ad7879_gpio_remove(ts); + sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); + free_irq(ts->irq, ts); + input_unregister_device(ts->input); + kfree(ts); +} +EXPORT_SYMBOL(ad7879_remove); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ad7879.h b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879.h new file mode 100644 index 00000000..6fd13c48 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ad7879.h @@ -0,0 +1,30 @@ +/* + * AD7879/AD7889 touchscreen (bus interfaces) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _AD7879_H_ +#define _AD7879_H_ + +#include <linux/types.h> + +struct ad7879; +struct device; + +struct ad7879_bus_ops { + u16 bustype; + int (*read)(struct device *dev, u8 reg); + int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf); + int (*write)(struct device *dev, u8 reg, u16 val); +}; + +extern const struct dev_pm_ops ad7879_pm_ops; + +struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq, + const struct ad7879_bus_ops *bops); +void ad7879_remove(struct ad7879 *); + +#endif diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ads7846.c b/ANDROID_3.4.5/drivers/input/touchscreen/ads7846.c new file mode 100644 index 00000000..f02028ec --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ads7846.c @@ -0,0 +1,1440 @@ +/* + * ADS7846 based touchscreen and sensor driver + * + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak <imre.deak@nokia.com> + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/hwmon.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/pm.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> +#include <asm/irq.h> + +/* + * This code has been heavily tested on a Nokia 770, and lightly + * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz). + * TSC2046 is just newer ads7846 silicon. + * Support for ads7843 tested on Atmel at91sam926x-EK. + * Support for ads7845 has only been stubbed in. + * Support for Analog Devices AD7873 and AD7843 tested. + * + * IRQ handling needs a workaround because of a shortcoming in handling + * edge triggered IRQs on some platforms like the OMAP1/2. These + * platforms don't handle the ARM lazy IRQ disabling properly, thus we + * have to maintain our own SW IRQ disabled status. This should be + * removed as soon as the affected platform's IRQ handling is fixed. + * + * App note sbaa036 talks in more detail about accurate sampling... + * that ought to help in situations like LCDs inducing noise (which + * can also be helped by using synch signals) and more generally. + * This driver tries to utilize the measures described in the app + * note. The strength of filtering can be set in the board-* specific + * files. + */ + +#define TS_POLL_DELAY 1 /* ms delay before the first sample */ +#define TS_POLL_PERIOD 5 /* ms delay between samples */ + +/* this driver doesn't aim at the peak continuous sample rate */ +#define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */) + +struct ts_event { + /* + * For portability, we can't read 12 bit values using SPI (which + * would make the controller deliver them as native byte order u16 + * with msbs zeroed). Instead, we read them as two 8-bit values, + * *** WHICH NEED BYTESWAPPING *** and range adjustment. + */ + u16 x; + u16 y; + u16 z1, z2; + bool ignore; + u8 x_buf[3]; + u8 y_buf[3]; +}; + +/* + * We allocate this separately to avoid cache line sharing issues when + * driver is used with DMA-based SPI controllers (like atmel_spi) on + * systems where main memory is not DMA-coherent (most non-x86 boards). + */ +struct ads7846_packet { + u8 read_x, read_y, read_z1, read_z2, pwrdown; + u16 dummy; /* for the pwrdown read */ + struct ts_event tc; + /* for ads7845 with mpc5121 psc spi we use 3-byte buffers */ + u8 read_x_cmd[3], read_y_cmd[3], pwrdown_cmd[3]; +}; + +struct ads7846 { + struct input_dev *input; + char phys[32]; + char name[32]; + + struct spi_device *spi; + struct regulator *reg; + +#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) + struct attribute_group *attr_group; + struct device *hwmon; +#endif + + u16 model; + u16 vref_mv; + u16 vref_delay_usecs; + u16 x_plate_ohms; + u16 pressure_max; + + bool swap_xy; + bool use_internal; + + struct ads7846_packet *packet; + + struct spi_transfer xfer[18]; + struct spi_message msg[5]; + int msg_count; + wait_queue_head_t wait; + + bool pendown; + + int read_cnt; + int read_rep; + int last_read; + + u16 debounce_max; + u16 debounce_tol; + u16 debounce_rep; + + u16 penirq_recheck_delay_usecs; + + struct mutex lock; + bool stopped; /* P: lock */ + bool disabled; /* P: lock */ + bool suspended; /* P: lock */ + + int (*filter)(void *data, int data_idx, int *val); + void *filter_data; + void (*filter_cleanup)(void *data); + int (*get_pendown_state)(void); + int gpio_pendown; + + void (*wait_for_sync)(void); +}; + +/* leave chip selected when we're done, for quicker re-select? */ +#if 0 +#define CS_CHANGE(xfer) ((xfer).cs_change = 1) +#else +#define CS_CHANGE(xfer) ((xfer).cs_change = 0) +#endif + +/*--------------------------------------------------------------------------*/ + +/* The ADS7846 has touchscreen and other sensors. + * Earlier ads784x chips are somewhat compatible. + */ +#define ADS_START (1 << 7) +#define ADS_A2A1A0_d_y (1 << 4) /* differential */ +#define ADS_A2A1A0_d_z1 (3 << 4) /* differential */ +#define ADS_A2A1A0_d_z2 (4 << 4) /* differential */ +#define ADS_A2A1A0_d_x (5 << 4) /* differential */ +#define ADS_A2A1A0_temp0 (0 << 4) /* non-differential */ +#define ADS_A2A1A0_vbatt (2 << 4) /* non-differential */ +#define ADS_A2A1A0_vaux (6 << 4) /* non-differential */ +#define ADS_A2A1A0_temp1 (7 << 4) /* non-differential */ +#define ADS_8_BIT (1 << 3) +#define ADS_12_BIT (0 << 3) +#define ADS_SER (1 << 2) /* non-differential */ +#define ADS_DFR (0 << 2) /* differential */ +#define ADS_PD10_PDOWN (0 << 0) /* low power mode + penirq */ +#define ADS_PD10_ADC_ON (1 << 0) /* ADC on */ +#define ADS_PD10_REF_ON (2 << 0) /* vREF on + penirq */ +#define ADS_PD10_ALL_ON (3 << 0) /* ADC + vREF on */ + +#define MAX_12BIT ((1<<12)-1) + +/* leave ADC powered up (disables penirq) between differential samples */ +#define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \ + | ADS_12_BIT | ADS_DFR | \ + (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0)) + +#define READ_Y(vref) (READ_12BIT_DFR(y, 1, vref)) +#define READ_Z1(vref) (READ_12BIT_DFR(z1, 1, vref)) +#define READ_Z2(vref) (READ_12BIT_DFR(z2, 1, vref)) + +#define READ_X(vref) (READ_12BIT_DFR(x, 1, vref)) +#define PWRDOWN (READ_12BIT_DFR(y, 0, 0)) /* LAST */ + +/* single-ended samples need to first power up reference voltage; + * we leave both ADC and VREF powered + */ +#define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \ + | ADS_12_BIT | ADS_SER) + +#define REF_ON (READ_12BIT_DFR(x, 1, 1)) +#define REF_OFF (READ_12BIT_DFR(y, 0, 0)) + +/* Must be called with ts->lock held */ +static void ads7846_stop(struct ads7846 *ts) +{ + if (!ts->disabled && !ts->suspended) { + /* Signal IRQ thread to stop polling and disable the handler. */ + ts->stopped = true; + mb(); + wake_up(&ts->wait); + disable_irq(ts->spi->irq); + } +} + +/* Must be called with ts->lock held */ +static void ads7846_restart(struct ads7846 *ts) +{ + if (!ts->disabled && !ts->suspended) { + /* Tell IRQ thread that it may poll the device. */ + ts->stopped = false; + mb(); + enable_irq(ts->spi->irq); + } +} + +/* Must be called with ts->lock held */ +static void __ads7846_disable(struct ads7846 *ts) +{ + ads7846_stop(ts); + regulator_disable(ts->reg); + + /* + * We know the chip's in low power mode since we always + * leave it that way after every request + */ +} + +/* Must be called with ts->lock held */ +static void __ads7846_enable(struct ads7846 *ts) +{ + regulator_enable(ts->reg); + ads7846_restart(ts); +} + +static void ads7846_disable(struct ads7846 *ts) +{ + mutex_lock(&ts->lock); + + if (!ts->disabled) { + + if (!ts->suspended) + __ads7846_disable(ts); + + ts->disabled = true; + } + + mutex_unlock(&ts->lock); +} + +static void ads7846_enable(struct ads7846 *ts) +{ + mutex_lock(&ts->lock); + + if (ts->disabled) { + + ts->disabled = false; + + if (!ts->suspended) + __ads7846_enable(ts); + } + + mutex_unlock(&ts->lock); +} + +/*--------------------------------------------------------------------------*/ + +/* + * Non-touchscreen sensors only use single-ended conversions. + * The range is GND..vREF. The ads7843 and ads7835 must use external vREF; + * ads7846 lets that pin be unconnected, to use internal vREF. + */ + +struct ser_req { + u8 ref_on; + u8 command; + u8 ref_off; + u16 scratch; + struct spi_message msg; + struct spi_transfer xfer[6]; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + __be16 sample ____cacheline_aligned; +}; + +struct ads7845_ser_req { + u8 command[3]; + struct spi_message msg; + struct spi_transfer xfer[2]; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u8 sample[3] ____cacheline_aligned; +}; + +static int ads7846_read12_ser(struct device *dev, unsigned command) +{ + struct spi_device *spi = to_spi_device(dev); + struct ads7846 *ts = dev_get_drvdata(dev); + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + /* maybe turn on internal vREF, and let it settle */ + if (ts->use_internal) { + req->ref_on = REF_ON; + req->xfer[0].tx_buf = &req->ref_on; + req->xfer[0].len = 1; + spi_message_add_tail(&req->xfer[0], &req->msg); + + req->xfer[1].rx_buf = &req->scratch; + req->xfer[1].len = 2; + + /* for 1uF, settle for 800 usec; no cap, 100 usec. */ + req->xfer[1].delay_usecs = ts->vref_delay_usecs; + spi_message_add_tail(&req->xfer[1], &req->msg); + + /* Enable reference voltage */ + command |= ADS_PD10_REF_ON; + } + + /* Enable ADC in every case */ + command |= ADS_PD10_ADC_ON; + + /* take sample */ + req->command = (u8) command; + req->xfer[2].tx_buf = &req->command; + req->xfer[2].len = 1; + spi_message_add_tail(&req->xfer[2], &req->msg); + + req->xfer[3].rx_buf = &req->sample; + req->xfer[3].len = 2; + spi_message_add_tail(&req->xfer[3], &req->msg); + + /* REVISIT: take a few more samples, and compare ... */ + + /* converter in low power mode & enable PENIRQ */ + req->ref_off = PWRDOWN; + req->xfer[4].tx_buf = &req->ref_off; + req->xfer[4].len = 1; + spi_message_add_tail(&req->xfer[4], &req->msg); + + req->xfer[5].rx_buf = &req->scratch; + req->xfer[5].len = 2; + CS_CHANGE(req->xfer[5]); + spi_message_add_tail(&req->xfer[5], &req->msg); + + mutex_lock(&ts->lock); + ads7846_stop(ts); + status = spi_sync(spi, &req->msg); + ads7846_restart(ts); + mutex_unlock(&ts->lock); + + if (status == 0) { + /* on-wire is a must-ignore bit, a BE12 value, then padding */ + status = be16_to_cpu(req->sample); + status = status >> 3; + status &= 0x0fff; + } + + kfree(req); + return status; +} + +static int ads7845_read12_ser(struct device *dev, unsigned command) +{ + struct spi_device *spi = to_spi_device(dev); + struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7845_ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command[0] = (u8) command; + req->xfer[0].tx_buf = req->command; + req->xfer[0].rx_buf = req->sample; + req->xfer[0].len = 3; + spi_message_add_tail(&req->xfer[0], &req->msg); + + mutex_lock(&ts->lock); + ads7846_stop(ts); + status = spi_sync(spi, &req->msg); + ads7846_restart(ts); + mutex_unlock(&ts->lock); + + if (status == 0) { + /* BE12 value, then padding */ + status = be16_to_cpu(*((u16 *)&req->sample[1])); + status = status >> 3; + status &= 0x0fff; + } + + kfree(req); + return status; +} + +#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) + +#define SHOW(name, var, adjust) static ssize_t \ +name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct ads7846 *ts = dev_get_drvdata(dev); \ + ssize_t v = ads7846_read12_ser(dev, \ + READ_12BIT_SER(var)); \ + if (v < 0) \ + return v; \ + return sprintf(buf, "%u\n", adjust(ts, v)); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL); + + +/* Sysfs conventions report temperatures in millidegrees Celsius. + * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high + * accuracy scheme without calibration data. For now we won't try either; + * userspace sees raw sensor values, and must scale/calibrate appropriately. + */ +static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v) +{ + return v; +} + +SHOW(temp0, temp0, null_adjust) /* temp1_input */ +SHOW(temp1, temp1, null_adjust) /* temp2_input */ + + +/* sysfs conventions report voltages in millivolts. We can convert voltages + * if we know vREF. userspace may need to scale vAUX to match the board's + * external resistors; we assume that vBATT only uses the internal ones. + */ +static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v) +{ + unsigned retval = v; + + /* external resistors may scale vAUX into 0..vREF */ + retval *= ts->vref_mv; + retval = retval >> 12; + + return retval; +} + +static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v) +{ + unsigned retval = vaux_adjust(ts, v); + + /* ads7846 has a resistor ladder to scale this signal down */ + if (ts->model == 7846) + retval *= 4; + + return retval; +} + +SHOW(in0_input, vaux, vaux_adjust) +SHOW(in1_input, vbatt, vbatt_adjust) + +static struct attribute *ads7846_attributes[] = { + &dev_attr_temp0.attr, + &dev_attr_temp1.attr, + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + NULL, +}; + +static struct attribute_group ads7846_attr_group = { + .attrs = ads7846_attributes, +}; + +static struct attribute *ads7843_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + NULL, +}; + +static struct attribute_group ads7843_attr_group = { + .attrs = ads7843_attributes, +}; + +static struct attribute *ads7845_attributes[] = { + &dev_attr_in0_input.attr, + NULL, +}; + +static struct attribute_group ads7845_attr_group = { + .attrs = ads7845_attributes, +}; + +static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) +{ + struct device *hwmon; + int err; + + /* hwmon sensors need a reference voltage */ + switch (ts->model) { + case 7846: + if (!ts->vref_mv) { + dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n"); + ts->vref_mv = 2500; + ts->use_internal = true; + } + break; + case 7845: + case 7843: + if (!ts->vref_mv) { + dev_warn(&spi->dev, + "external vREF for ADS%d not specified\n", + ts->model); + return 0; + } + break; + } + + /* different chips have different sensor groups */ + switch (ts->model) { + case 7846: + ts->attr_group = &ads7846_attr_group; + break; + case 7845: + ts->attr_group = &ads7845_attr_group; + break; + case 7843: + ts->attr_group = &ads7843_attr_group; + break; + default: + dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model); + return 0; + } + + err = sysfs_create_group(&spi->dev.kobj, ts->attr_group); + if (err) + return err; + + hwmon = hwmon_device_register(&spi->dev); + if (IS_ERR(hwmon)) { + sysfs_remove_group(&spi->dev.kobj, ts->attr_group); + return PTR_ERR(hwmon); + } + + ts->hwmon = hwmon; + return 0; +} + +static void ads784x_hwmon_unregister(struct spi_device *spi, + struct ads7846 *ts) +{ + if (ts->hwmon) { + sysfs_remove_group(&spi->dev.kobj, ts->attr_group); + hwmon_device_unregister(ts->hwmon); + } +} + +#else +static inline int ads784x_hwmon_register(struct spi_device *spi, + struct ads7846 *ts) +{ + return 0; +} + +static inline void ads784x_hwmon_unregister(struct spi_device *spi, + struct ads7846 *ts) +{ +} +#endif + +static ssize_t ads7846_pen_down_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->pendown); +} + +static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL); + +static ssize_t ads7846_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ads7846_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + unsigned int i; + int err; + + err = kstrtouint(buf, 10, &i); + if (err) + return err; + + if (i) + ads7846_disable(ts); + else + ads7846_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store); + +static struct attribute *ads784x_attributes[] = { + &dev_attr_pen_down.attr, + &dev_attr_disable.attr, + NULL, +}; + +static struct attribute_group ads784x_attr_group = { + .attrs = ads784x_attributes, +}; + +/*--------------------------------------------------------------------------*/ + +static int get_pendown_state(struct ads7846 *ts) +{ + if (ts->get_pendown_state) + return ts->get_pendown_state(); + + return !gpio_get_value(ts->gpio_pendown); +} + +static void null_wait_for_sync(void) +{ +} + +static int ads7846_debounce_filter(void *ads, int data_idx, int *val) +{ + struct ads7846 *ts = ads; + + if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) { + /* Start over collecting consistent readings. */ + ts->read_rep = 0; + /* + * Repeat it, if this was the first read or the read + * wasn't consistent enough. + */ + if (ts->read_cnt < ts->debounce_max) { + ts->last_read = *val; + ts->read_cnt++; + return ADS7846_FILTER_REPEAT; + } else { + /* + * Maximum number of debouncing reached and still + * not enough number of consistent readings. Abort + * the whole sample, repeat it in the next sampling + * period. + */ + ts->read_cnt = 0; + return ADS7846_FILTER_IGNORE; + } + } else { + if (++ts->read_rep > ts->debounce_rep) { + /* + * Got a good reading for this coordinate, + * go for the next one. + */ + ts->read_cnt = 0; + ts->read_rep = 0; + return ADS7846_FILTER_OK; + } else { + /* Read more values that are consistent. */ + ts->read_cnt++; + return ADS7846_FILTER_REPEAT; + } + } +} + +static int ads7846_no_filter(void *ads, int data_idx, int *val) +{ + return ADS7846_FILTER_OK; +} + +static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m) +{ + struct spi_transfer *t = + list_entry(m->transfers.prev, struct spi_transfer, transfer_list); + + if (ts->model == 7845) { + return be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3; + } else { + /* + * adjust: on-wire is a must-ignore bit, a BE12 value, then + * padding; built from two 8 bit values written msb-first. + */ + return be16_to_cpup((__be16 *)t->rx_buf) >> 3; + } +} + +static void ads7846_update_value(struct spi_message *m, int val) +{ + struct spi_transfer *t = + list_entry(m->transfers.prev, struct spi_transfer, transfer_list); + + *(u16 *)t->rx_buf = val; +} + +static void ads7846_read_state(struct ads7846 *ts) +{ + struct ads7846_packet *packet = ts->packet; + struct spi_message *m; + int msg_idx = 0; + int val; + int action; + int error; + + while (msg_idx < ts->msg_count) { + + ts->wait_for_sync(); + + m = &ts->msg[msg_idx]; + error = spi_sync(ts->spi, m); + if (error) { + dev_err(&ts->spi->dev, "spi_async --> %d\n", error); + packet->tc.ignore = true; + return; + } + + /* + * Last message is power down request, no need to convert + * or filter the value. + */ + if (msg_idx < ts->msg_count - 1) { + + val = ads7846_get_value(ts, m); + + action = ts->filter(ts->filter_data, msg_idx, &val); + switch (action) { + case ADS7846_FILTER_REPEAT: + continue; + + case ADS7846_FILTER_IGNORE: + packet->tc.ignore = true; + msg_idx = ts->msg_count - 1; + continue; + + case ADS7846_FILTER_OK: + ads7846_update_value(m, val); + packet->tc.ignore = false; + msg_idx++; + break; + + default: + BUG(); + } + } else { + msg_idx++; + } + } +} + +static void ads7846_report_state(struct ads7846 *ts) +{ + struct ads7846_packet *packet = ts->packet; + unsigned int Rt; + u16 x, y, z1, z2; + + /* + * ads7846_get_value() does in-place conversion (including byte swap) + * from on-the-wire format as part of debouncing to get stable + * readings. + */ + if (ts->model == 7845) { + x = *(u16 *)packet->tc.x_buf; + y = *(u16 *)packet->tc.y_buf; + z1 = 0; + z2 = 0; + } else { + x = packet->tc.x; + y = packet->tc.y; + z1 = packet->tc.z1; + z2 = packet->tc.z2; + } + + /* range filtering */ + if (x == MAX_12BIT) + x = 0; + + if (ts->model == 7843) { + Rt = ts->pressure_max / 2; + } else if (ts->model == 7845) { + if (get_pendown_state(ts)) + Rt = ts->pressure_max / 2; + else + Rt = 0; + dev_vdbg(&ts->spi->dev, "x/y: %d/%d, PD %d\n", x, y, Rt); + } else if (likely(x && z1)) { + /* compute touch pressure resistance using equation #2 */ + Rt = z2; + Rt -= z1; + Rt *= x; + Rt *= ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + } else { + Rt = 0; + } + + /* + * Sample found inconsistent by debouncing or pressure is beyond + * the maximum. Don't report it to user space, repeat at least + * once more the measurement + */ + if (packet->tc.ignore || Rt > ts->pressure_max) { + dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n", + packet->tc.ignore, Rt); + return; + } + + /* + * Maybe check the pendown state before reporting. This discards + * false readings when the pen is lifted. + */ + if (ts->penirq_recheck_delay_usecs) { + udelay(ts->penirq_recheck_delay_usecs); + if (!get_pendown_state(ts)) + Rt = 0; + } + + /* + * NOTE: We can't rely on the pressure to determine the pen down + * state, even this controller has a pressure sensor. The pressure + * value can fluctuate for quite a while after lifting the pen and + * in some cases may not even settle at the expected value. + * + * The only safe way to check for the pen up condition is in the + * timer by reading the pen signal state (it's a GPIO _and_ IRQ). + */ + if (Rt) { + struct input_dev *input = ts->input; + + if (ts->swap_xy) + swap(x, y); + + if (!ts->pendown) { + input_report_key(input, BTN_TOUCH, 1); + ts->pendown = true; + dev_vdbg(&ts->spi->dev, "DOWN\n"); + } + + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt); + + input_sync(input); + dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt); + } +} + +static irqreturn_t ads7846_hard_irq(int irq, void *handle) +{ + struct ads7846 *ts = handle; + + return get_pendown_state(ts) ? IRQ_WAKE_THREAD : IRQ_HANDLED; +} + + +static irqreturn_t ads7846_irq(int irq, void *handle) +{ + struct ads7846 *ts = handle; + + /* Start with a small delay before checking pendown state */ + msleep(TS_POLL_DELAY); + + while (!ts->stopped && get_pendown_state(ts)) { + + /* pen is down, continue with the measurement */ + ads7846_read_state(ts); + + if (!ts->stopped) + ads7846_report_state(ts); + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(TS_POLL_PERIOD)); + } + + if (ts->pendown) { + struct input_dev *input = ts->input; + + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); + + ts->pendown = false; + dev_vdbg(&ts->spi->dev, "UP\n"); + } + + return IRQ_HANDLED; +} + +#ifdef CONFIG_PM_SLEEP +static int ads7846_suspend(struct device *dev) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->lock); + + if (!ts->suspended) { + + if (!ts->disabled) + __ads7846_disable(ts); + + if (device_may_wakeup(&ts->spi->dev)) + enable_irq_wake(ts->spi->irq); + + ts->suspended = true; + } + + mutex_unlock(&ts->lock); + + return 0; +} + +static int ads7846_resume(struct device *dev) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->lock); + + if (ts->suspended) { + + ts->suspended = false; + + if (device_may_wakeup(&ts->spi->dev)) + disable_irq_wake(ts->spi->irq); + + if (!ts->disabled) + __ads7846_enable(ts); + } + + mutex_unlock(&ts->lock); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume); + +static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts) +{ + struct ads7846_platform_data *pdata = spi->dev.platform_data; + int err; + + /* + * REVISIT when the irq can be triggered active-low, or if for some + * reason the touchscreen isn't hooked up, we don't need to access + * the pendown state. + */ + + if (pdata->get_pendown_state) { + ts->get_pendown_state = pdata->get_pendown_state; + } else if (gpio_is_valid(pdata->gpio_pendown)) { + + err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN, + "ads7846_pendown"); + if (err) { + dev_err(&spi->dev, + "failed to request/setup pendown GPIO%d: %d\n", + pdata->gpio_pendown, err); + return err; + } + + ts->gpio_pendown = pdata->gpio_pendown; + + } else { + dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); + return -EINVAL; + } + + return 0; +} + +/* + * Set up the transfers to read touchscreen state; this assumes we + * use formula #2 for pressure, not #3. + */ +static void __devinit ads7846_setup_spi_msg(struct ads7846 *ts, + const struct ads7846_platform_data *pdata) +{ + struct spi_message *m = &ts->msg[0]; + struct spi_transfer *x = ts->xfer; + struct ads7846_packet *packet = ts->packet; + int vref = pdata->keep_vref_on; + + if (ts->model == 7873) { + /* + * The AD7873 is almost identical to the ADS7846 + * keep VREF off during differential/ratiometric + * conversion modes. + */ + ts->model = 7846; + vref = 0; + } + + ts->msg_count = 1; + spi_message_init(m); + m->context = ts; + + if (ts->model == 7845) { + packet->read_y_cmd[0] = READ_Y(vref); + packet->read_y_cmd[1] = 0; + packet->read_y_cmd[2] = 0; + x->tx_buf = &packet->read_y_cmd[0]; + x->rx_buf = &packet->tc.y_buf[0]; + x->len = 3; + spi_message_add_tail(x, m); + } else { + /* y- still on; turn on only y+ (and ADC) */ + packet->read_y = READ_Y(vref); + x->tx_buf = &packet->read_y; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.y; + x->len = 2; + spi_message_add_tail(x, m); + } + + /* + * The first sample after switching drivers can be low quality; + * optionally discard it, using a second one after the signals + * have had enough time to stabilize. + */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &packet->read_y; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.y; + x->len = 2; + spi_message_add_tail(x, m); + } + + ts->msg_count++; + m++; + spi_message_init(m); + m->context = ts; + + if (ts->model == 7845) { + x++; + packet->read_x_cmd[0] = READ_X(vref); + packet->read_x_cmd[1] = 0; + packet->read_x_cmd[2] = 0; + x->tx_buf = &packet->read_x_cmd[0]; + x->rx_buf = &packet->tc.x_buf[0]; + x->len = 3; + spi_message_add_tail(x, m); + } else { + /* turn y- off, x+ on, then leave in lowpower */ + x++; + packet->read_x = READ_X(vref); + x->tx_buf = &packet->read_x; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.x; + x->len = 2; + spi_message_add_tail(x, m); + } + + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &packet->read_x; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.x; + x->len = 2; + spi_message_add_tail(x, m); + } + + /* turn y+ off, x- on; we'll use formula #2 */ + if (ts->model == 7846) { + ts->msg_count++; + m++; + spi_message_init(m); + m->context = ts; + + x++; + packet->read_z1 = READ_Z1(vref); + x->tx_buf = &packet->read_z1; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.z1; + x->len = 2; + spi_message_add_tail(x, m); + + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &packet->read_z1; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.z1; + x->len = 2; + spi_message_add_tail(x, m); + } + + ts->msg_count++; + m++; + spi_message_init(m); + m->context = ts; + + x++; + packet->read_z2 = READ_Z2(vref); + x->tx_buf = &packet->read_z2; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.z2; + x->len = 2; + spi_message_add_tail(x, m); + + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &packet->read_z2; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->tc.z2; + x->len = 2; + spi_message_add_tail(x, m); + } + } + + /* power down */ + ts->msg_count++; + m++; + spi_message_init(m); + m->context = ts; + + if (ts->model == 7845) { + x++; + packet->pwrdown_cmd[0] = PWRDOWN; + packet->pwrdown_cmd[1] = 0; + packet->pwrdown_cmd[2] = 0; + x->tx_buf = &packet->pwrdown_cmd[0]; + x->len = 3; + } else { + x++; + packet->pwrdown = PWRDOWN; + x->tx_buf = &packet->pwrdown; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->dummy; + x->len = 2; + } + + CS_CHANGE(*x); + spi_message_add_tail(x, m); +} + +static int __devinit ads7846_probe(struct spi_device *spi) +{ + struct ads7846 *ts; + struct ads7846_packet *packet; + struct input_dev *input_dev; + struct ads7846_platform_data *pdata = spi->dev.platform_data; + unsigned long irq_flags; + int err; + + if (!spi->irq) { + dev_dbg(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + /* don't exceed max specified sample rate */ + if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) { + dev_dbg(&spi->dev, "f(sample) %d KHz?\n", + (spi->max_speed_hz/SAMPLE_BITS)/1000); + return -EINVAL; + } + + /* We'd set TX word size 8 bits and RX word size to 13 bits ... except + * that even if the hardware can do that, the SPI controller driver + * may not. So we stick to very-portable 8 bit words, both RX and TX. + */ + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + err = spi_setup(spi); + if (err < 0) + return err; + + ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL); + packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !packet || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + dev_set_drvdata(&spi->dev, ts); + + ts->packet = packet; + ts->spi = spi; + ts->input = input_dev; + ts->vref_mv = pdata->vref_mv; + ts->swap_xy = pdata->swap_xy; + + mutex_init(&ts->lock); + init_waitqueue_head(&ts->wait); + + ts->model = pdata->model ? : 7846; + ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + if (pdata->filter != NULL) { + if (pdata->filter_init != NULL) { + err = pdata->filter_init(pdata, &ts->filter_data); + if (err < 0) + goto err_free_mem; + } + ts->filter = pdata->filter; + ts->filter_cleanup = pdata->filter_cleanup; + } else if (pdata->debounce_max) { + ts->debounce_max = pdata->debounce_max; + if (ts->debounce_max < 2) + ts->debounce_max = 2; + ts->debounce_tol = pdata->debounce_tol; + ts->debounce_rep = pdata->debounce_rep; + ts->filter = ads7846_debounce_filter; + ts->filter_data = ts; + } else { + ts->filter = ads7846_no_filter; + } + + err = ads7846_setup_pendown(spi, ts); + if (err) + goto err_cleanup_filter; + + if (pdata->penirq_recheck_delay_usecs) + ts->penirq_recheck_delay_usecs = + pdata->penirq_recheck_delay_usecs; + + ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); + snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model); + + input_dev->name = ts->name; + input_dev->phys = ts->phys; + input_dev->dev.parent = &spi->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + ads7846_setup_spi_msg(ts, pdata); + + ts->reg = regulator_get(&spi->dev, "vcc"); + if (IS_ERR(ts->reg)) { + err = PTR_ERR(ts->reg); + dev_err(&spi->dev, "unable to get regulator: %d\n", err); + goto err_free_gpio; + } + + err = regulator_enable(ts->reg); + if (err) { + dev_err(&spi->dev, "unable to enable regulator: %d\n", err); + goto err_put_regulator; + } + + irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING; + irq_flags |= IRQF_ONESHOT; + + err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq, + irq_flags, spi->dev.driver->name, ts); + if (err && !pdata->irq_flags) { + dev_info(&spi->dev, + "trying pin change workaround on irq %d\n", spi->irq); + irq_flags |= IRQF_TRIGGER_RISING; + err = request_threaded_irq(spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, spi->dev.driver->name, ts); + } + + if (err) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + goto err_disable_regulator; + } + + err = ads784x_hwmon_register(spi, ts); + if (err) + goto err_free_irq; + + dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq); + + /* + * Take a first sample, leaving nPENIRQ active and vREF off; avoid + * the touchscreen, in case it's not connected. + */ + if (ts->model == 7845) + ads7845_read12_ser(&spi->dev, PWRDOWN); + else + (void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux)); + + err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group); + if (err) + goto err_remove_hwmon; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr_group; + + device_init_wakeup(&spi->dev, pdata->wakeup); + + return 0; + + err_remove_attr_group: + sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group); + err_remove_hwmon: + ads784x_hwmon_unregister(spi, ts); + err_free_irq: + free_irq(spi->irq, ts); + err_disable_regulator: + regulator_disable(ts->reg); + err_put_regulator: + regulator_put(ts->reg); + err_free_gpio: + if (!ts->get_pendown_state) + gpio_free(ts->gpio_pendown); + err_cleanup_filter: + if (ts->filter_cleanup) + ts->filter_cleanup(ts->filter_data); + err_free_mem: + input_free_device(input_dev); + kfree(packet); + kfree(ts); + return err; +} + +static int __devexit ads7846_remove(struct spi_device *spi) +{ + struct ads7846 *ts = dev_get_drvdata(&spi->dev); + + device_init_wakeup(&spi->dev, false); + + sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group); + + ads7846_disable(ts); + free_irq(ts->spi->irq, ts); + + input_unregister_device(ts->input); + + ads784x_hwmon_unregister(spi, ts); + + regulator_disable(ts->reg); + regulator_put(ts->reg); + + if (!ts->get_pendown_state) { + /* + * If we are not using specialized pendown method we must + * have been relying on gpio we set up ourselves. + */ + gpio_free(ts->gpio_pendown); + } + + if (ts->filter_cleanup) + ts->filter_cleanup(ts->filter_data); + + kfree(ts->packet); + kfree(ts); + + dev_dbg(&spi->dev, "unregistered touchscreen\n"); + + return 0; +} + +static struct spi_driver ads7846_driver = { + .driver = { + .name = "ads7846", + .owner = THIS_MODULE, + .pm = &ads7846_pm, + }, + .probe = ads7846_probe, + .remove = __devexit_p(ads7846_remove), +}; + +module_spi_driver(ads7846_driver); + +MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ads7846"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/atmel-wm97xx.c b/ANDROID_3.4.5/drivers/input/touchscreen/atmel-wm97xx.c new file mode 100644 index 00000000..c5c2dbb9 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/atmel-wm97xx.c @@ -0,0 +1,449 @@ +/* + * Atmel AT91 and AVR32 continuous touch screen driver for Wolfson WM97xx AC97 + * codecs. + * + * Copyright (C) 2008 - 2009 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/wm97xx.h> +#include <linux/timer.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define AC97C_ICA 0x10 +#define AC97C_CBRHR 0x30 +#define AC97C_CBSR 0x38 +#define AC97C_CBMR 0x3c +#define AC97C_IER 0x54 +#define AC97C_IDR 0x58 + +#define AC97C_RXRDY (1 << 4) +#define AC97C_OVRUN (1 << 5) + +#define AC97C_CMR_SIZE_20 (0 << 16) +#define AC97C_CMR_SIZE_18 (1 << 16) +#define AC97C_CMR_SIZE_16 (2 << 16) +#define AC97C_CMR_SIZE_10 (3 << 16) +#define AC97C_CMR_CEM_LITTLE (1 << 18) +#define AC97C_CMR_CEM_BIG (0 << 18) +#define AC97C_CMR_CENA (1 << 21) + +#define AC97C_INT_CBEVT (1 << 4) + +#define AC97C_SR_CAEVT (1 << 3) + +#define AC97C_CH_MASK(slot) \ + (0x7 << (3 * (slot - 3))) +#define AC97C_CH_ASSIGN(slot, channel) \ + (AC97C_CHANNEL_##channel << (3 * (slot - 3))) +#define AC97C_CHANNEL_NONE 0x0 +#define AC97C_CHANNEL_B 0x2 + +#define ac97c_writel(chip, reg, val) \ + __raw_writel((val), (chip)->regs + AC97C_##reg) +#define ac97c_readl(chip, reg) \ + __raw_readl((chip)->regs + AC97C_##reg) + +#ifdef CONFIG_CPU_AT32AP700X +#define ATMEL_WM97XX_AC97C_IOMEM (0xfff02800) +#define ATMEL_WM97XX_AC97C_IRQ (29) +#define ATMEL_WM97XX_GPIO_DEFAULT (32+16) /* Pin 16 on port B. */ +#else +#error Unknown CPU, this driver only supports AT32AP700X CPUs. +#endif + +struct continuous { + u16 id; /* codec id */ + u8 code; /* continuous code */ + u8 reads; /* number of coord reads per read cycle */ + u32 speed; /* number of coords per second */ +}; + +#define WM_READS(sp) ((sp / HZ) + 1) + +static const struct continuous cinfo[] = { + {WM9705_ID2, 0, WM_READS(94), 94}, + {WM9705_ID2, 1, WM_READS(188), 188}, + {WM9705_ID2, 2, WM_READS(375), 375}, + {WM9705_ID2, 3, WM_READS(750), 750}, + {WM9712_ID2, 0, WM_READS(94), 94}, + {WM9712_ID2, 1, WM_READS(188), 188}, + {WM9712_ID2, 2, WM_READS(375), 375}, + {WM9712_ID2, 3, WM_READS(750), 750}, + {WM9713_ID2, 0, WM_READS(94), 94}, + {WM9713_ID2, 1, WM_READS(120), 120}, + {WM9713_ID2, 2, WM_READS(154), 154}, + {WM9713_ID2, 3, WM_READS(188), 188}, +}; + +/* Continuous speed index. */ +static int sp_idx; + +/* + * Pen sampling frequency (Hz) in continuous mode. + */ +static int cont_rate = 188; +module_param(cont_rate, int, 0); +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); + +/* + * Pen down detection. + * + * This driver can either poll or use an interrupt to indicate a pen down + * event. If the irq request fails then it will fall back to polling mode. + */ +static int pen_int = 1; +module_param(pen_int, int, 0); +MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)"); + +/* + * Pressure readback. + * + * Set to 1 to read back pen down pressure. + */ +static int pressure; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); + +/* + * AC97 touch data slot. + * + * Touch screen readback data ac97 slot. + */ +static int ac97_touch_slot = 5; +module_param(ac97_touch_slot, int, 0); +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); + +/* + * GPIO line number. + * + * Set to GPIO number where the signal from the WM97xx device is hooked up. + */ +static int atmel_gpio_line = ATMEL_WM97XX_GPIO_DEFAULT; +module_param(atmel_gpio_line, int, 0); +MODULE_PARM_DESC(atmel_gpio_line, "GPIO line number connected to WM97xx"); + +struct atmel_wm97xx { + struct wm97xx *wm; + struct timer_list pen_timer; + void __iomem *regs; + unsigned long ac97c_irq; + unsigned long gpio_pen; + unsigned long gpio_irq; + unsigned short x; + unsigned short y; +}; + +static irqreturn_t atmel_wm97xx_channel_b_interrupt(int irq, void *dev_id) +{ + struct atmel_wm97xx *atmel_wm97xx = dev_id; + struct wm97xx *wm = atmel_wm97xx->wm; + int status = ac97c_readl(atmel_wm97xx, CBSR); + irqreturn_t retval = IRQ_NONE; + + if (status & AC97C_OVRUN) { + dev_dbg(&wm->touch_dev->dev, "AC97C overrun\n"); + ac97c_readl(atmel_wm97xx, CBRHR); + retval = IRQ_HANDLED; + } else if (status & AC97C_RXRDY) { + u16 data; + u16 value; + u16 source; + u16 pen_down; + + data = ac97c_readl(atmel_wm97xx, CBRHR); + value = data & 0x0fff; + source = data & WM97XX_ADCSEL_MASK; + pen_down = (data & WM97XX_PEN_DOWN) >> 8; + + if (source == WM97XX_ADCSEL_X) + atmel_wm97xx->x = value; + if (source == WM97XX_ADCSEL_Y) + atmel_wm97xx->y = value; + + if (!pressure && source == WM97XX_ADCSEL_Y) { + input_report_abs(wm->input_dev, ABS_X, atmel_wm97xx->x); + input_report_abs(wm->input_dev, ABS_Y, atmel_wm97xx->y); + input_report_key(wm->input_dev, BTN_TOUCH, pen_down); + input_sync(wm->input_dev); + } else if (pressure && source == WM97XX_ADCSEL_PRES) { + input_report_abs(wm->input_dev, ABS_X, atmel_wm97xx->x); + input_report_abs(wm->input_dev, ABS_Y, atmel_wm97xx->y); + input_report_abs(wm->input_dev, ABS_PRESSURE, value); + input_report_key(wm->input_dev, BTN_TOUCH, value); + input_sync(wm->input_dev); + } + + retval = IRQ_HANDLED; + } + + return retval; +} + +static void atmel_wm97xx_acc_pen_up(struct wm97xx *wm) +{ + struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(wm->touch_dev); + struct input_dev *input_dev = wm->input_dev; + int pen_down = gpio_get_value(atmel_wm97xx->gpio_pen); + + if (pen_down != 0) { + mod_timer(&atmel_wm97xx->pen_timer, + jiffies + msecs_to_jiffies(1)); + } else { + if (pressure) + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_report_key(input_dev, BTN_TOUCH, 0); + input_sync(input_dev); + } +} + +static void atmel_wm97xx_pen_timer(unsigned long data) +{ + atmel_wm97xx_acc_pen_up((struct wm97xx *)data); +} + +static int atmel_wm97xx_acc_startup(struct wm97xx *wm) +{ + struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(wm->touch_dev); + int idx = 0; + + if (wm->ac97 == NULL) + return -ENODEV; + + for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { + if (wm->id != cinfo[idx].id) + continue; + + sp_idx = idx; + + if (cont_rate <= cinfo[idx].speed) + break; + } + + wm->acc_rate = cinfo[sp_idx].code; + wm->acc_slot = ac97_touch_slot; + dev_info(&wm->touch_dev->dev, "atmel accelerated touchscreen driver, " + "%d samples/sec\n", cinfo[sp_idx].speed); + + if (pen_int) { + unsigned long reg; + + wm->pen_irq = atmel_wm97xx->gpio_irq; + + switch (wm->id) { + case WM9712_ID2: /* Fall through. */ + case WM9713_ID2: + /* + * Use GPIO 13 (PEN_DOWN) to assert GPIO line 3 + * (PENDOWN). + */ + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_STICKY, + WM97XX_GPIO_WAKE); + wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_NOTSTICKY, + WM97XX_GPIO_NOWAKE); + case WM9705_ID2: /* Fall through. */ + /* + * Enable touch data slot in AC97 controller channel B. + */ + reg = ac97c_readl(atmel_wm97xx, ICA); + reg &= ~AC97C_CH_MASK(wm->acc_slot); + reg |= AC97C_CH_ASSIGN(wm->acc_slot, B); + ac97c_writel(atmel_wm97xx, ICA, reg); + + /* + * Enable channel and interrupt for RXRDY and OVERRUN. + */ + ac97c_writel(atmel_wm97xx, CBMR, AC97C_CMR_CENA + | AC97C_CMR_CEM_BIG + | AC97C_CMR_SIZE_16 + | AC97C_OVRUN + | AC97C_RXRDY); + /* Dummy read to empty RXRHR. */ + ac97c_readl(atmel_wm97xx, CBRHR); + /* + * Enable interrupt for channel B in the AC97 + * controller. + */ + ac97c_writel(atmel_wm97xx, IER, AC97C_INT_CBEVT); + break; + default: + dev_err(&wm->touch_dev->dev, "pen down irq not " + "supported on this device\n"); + pen_int = 0; + break; + } + } + + return 0; +} + +static void atmel_wm97xx_acc_shutdown(struct wm97xx *wm) +{ + if (pen_int) { + struct atmel_wm97xx *atmel_wm97xx = + platform_get_drvdata(wm->touch_dev); + unsigned long ica; + + switch (wm->id & 0xffff) { + case WM9705_ID2: /* Fall through. */ + case WM9712_ID2: /* Fall through. */ + case WM9713_ID2: + /* Disable slot and turn off channel B interrupts. */ + ica = ac97c_readl(atmel_wm97xx, ICA); + ica &= ~AC97C_CH_MASK(wm->acc_slot); + ac97c_writel(atmel_wm97xx, ICA, ica); + ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT); + ac97c_writel(atmel_wm97xx, CBMR, 0); + wm->pen_irq = 0; + break; + default: + dev_err(&wm->touch_dev->dev, "unknown codec\n"); + break; + } + } +} + +static void atmel_wm97xx_irq_enable(struct wm97xx *wm, int enable) +{ + /* Intentionally left empty. */ +} + +static struct wm97xx_mach_ops atmel_mach_ops = { + .acc_enabled = 1, + .acc_pen_up = atmel_wm97xx_acc_pen_up, + .acc_startup = atmel_wm97xx_acc_startup, + .acc_shutdown = atmel_wm97xx_acc_shutdown, + .irq_enable = atmel_wm97xx_irq_enable, + .irq_gpio = WM97XX_GPIO_3, +}; + +static int __init atmel_wm97xx_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + struct atmel_wm97xx *atmel_wm97xx; + int ret; + + atmel_wm97xx = kzalloc(sizeof(struct atmel_wm97xx), GFP_KERNEL); + if (!atmel_wm97xx) { + dev_dbg(&pdev->dev, "out of memory\n"); + return -ENOMEM; + } + + atmel_wm97xx->wm = wm; + atmel_wm97xx->regs = (void *)ATMEL_WM97XX_AC97C_IOMEM; + atmel_wm97xx->ac97c_irq = ATMEL_WM97XX_AC97C_IRQ; + atmel_wm97xx->gpio_pen = atmel_gpio_line; + atmel_wm97xx->gpio_irq = gpio_to_irq(atmel_wm97xx->gpio_pen); + + setup_timer(&atmel_wm97xx->pen_timer, atmel_wm97xx_pen_timer, + (unsigned long)wm); + + ret = request_irq(atmel_wm97xx->ac97c_irq, + atmel_wm97xx_channel_b_interrupt, + IRQF_SHARED, "atmel-wm97xx-ch-b", atmel_wm97xx); + if (ret) { + dev_dbg(&pdev->dev, "could not request ac97c irq\n"); + goto err; + } + + platform_set_drvdata(pdev, atmel_wm97xx); + + ret = wm97xx_register_mach_ops(wm, &atmel_mach_ops); + if (ret) + goto err_irq; + + return ret; + +err_irq: + free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx); +err: + platform_set_drvdata(pdev, NULL); + kfree(atmel_wm97xx); + return ret; +} + +static int __exit atmel_wm97xx_remove(struct platform_device *pdev) +{ + struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); + struct wm97xx *wm = atmel_wm97xx->wm; + + ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT); + free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx); + del_timer_sync(&atmel_wm97xx->pen_timer); + wm97xx_unregister_mach_ops(wm); + platform_set_drvdata(pdev, NULL); + kfree(atmel_wm97xx); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int atmel_wm97xx_suspend(struct *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); + + ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT); + disable_irq(atmel_wm97xx->gpio_irq); + del_timer_sync(&atmel_wm97xx->pen_timer); + + return 0; +} + +static int atmel_wm97xx_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); + struct wm97xx *wm = atmel_wm97xx->wm; + + if (wm->input_dev->users) { + enable_irq(atmel_wm97xx->gpio_irq); + ac97c_writel(atmel_wm97xx, IER, AC97C_INT_CBEVT); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(atmel_wm97xx_pm_ops, + atmel_wm97xx_suspend, atmel_wm97xx_resume); + +static struct platform_driver atmel_wm97xx_driver = { + .remove = __exit_p(atmel_wm97xx_remove), + .driver = { + .name = "wm97xx-touch", + .owner = THIS_MODULE, + .pm = &atmel_wm97xx_pm_ops, + }, +}; + +static int __init atmel_wm97xx_init(void) +{ + return platform_driver_probe(&atmel_wm97xx_driver, atmel_wm97xx_probe); +} +module_init(atmel_wm97xx_init); + +static void __exit atmel_wm97xx_exit(void) +{ + platform_driver_unregister(&atmel_wm97xx_driver); +} +module_exit(atmel_wm97xx_exit); + +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); +MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/atmel_mxt_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/atmel_mxt_ts.c new file mode 100644 index 00000000..19d4ea65 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/atmel_mxt_ts.c @@ -0,0 +1,1275 @@ +/* + * Atmel maXTouch Touchscreen driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/i2c/atmel_mxt_ts.h> +#include <linux/input/mt.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +/* Version */ +#define MXT_VER_20 20 +#define MXT_VER_21 21 +#define MXT_VER_22 22 + +/* Slave addresses */ +#define MXT_APP_LOW 0x4a +#define MXT_APP_HIGH 0x4b +#define MXT_BOOT_LOW 0x24 +#define MXT_BOOT_HIGH 0x25 + +/* Firmware */ +#define MXT_FW_NAME "maxtouch.fw" + +/* Registers */ +#define MXT_FAMILY_ID 0x00 +#define MXT_VARIANT_ID 0x01 +#define MXT_VERSION 0x02 +#define MXT_BUILD 0x03 +#define MXT_MATRIX_X_SIZE 0x04 +#define MXT_MATRIX_Y_SIZE 0x05 +#define MXT_OBJECT_NUM 0x06 +#define MXT_OBJECT_START 0x07 + +#define MXT_OBJECT_SIZE 6 + +/* Object types */ +#define MXT_DEBUG_DIAGNOSTIC_T37 37 +#define MXT_GEN_MESSAGE_T5 5 +#define MXT_GEN_COMMAND_T6 6 +#define MXT_GEN_POWER_T7 7 +#define MXT_GEN_ACQUIRE_T8 8 +#define MXT_GEN_DATASOURCE_T53 53 +#define MXT_TOUCH_MULTI_T9 9 +#define MXT_TOUCH_KEYARRAY_T15 15 +#define MXT_TOUCH_PROXIMITY_T23 23 +#define MXT_TOUCH_PROXKEY_T52 52 +#define MXT_PROCI_GRIPFACE_T20 20 +#define MXT_PROCG_NOISE_T22 22 +#define MXT_PROCI_ONETOUCH_T24 24 +#define MXT_PROCI_TWOTOUCH_T27 27 +#define MXT_PROCI_GRIP_T40 40 +#define MXT_PROCI_PALM_T41 41 +#define MXT_PROCI_TOUCHSUPPRESSION_T42 42 +#define MXT_PROCI_STYLUS_T47 47 +#define MXT_PROCG_NOISESUPPRESSION_T48 48 +#define MXT_SPT_COMMSCONFIG_T18 18 +#define MXT_SPT_GPIOPWM_T19 19 +#define MXT_SPT_SELFTEST_T25 25 +#define MXT_SPT_CTECONFIG_T28 28 +#define MXT_SPT_USERDATA_T38 38 +#define MXT_SPT_DIGITIZER_T43 43 +#define MXT_SPT_MESSAGECOUNT_T44 44 +#define MXT_SPT_CTECONFIG_T46 46 + +/* MXT_GEN_COMMAND_T6 field */ +#define MXT_COMMAND_RESET 0 +#define MXT_COMMAND_BACKUPNV 1 +#define MXT_COMMAND_CALIBRATE 2 +#define MXT_COMMAND_REPORTALL 3 +#define MXT_COMMAND_DIAGNOSTIC 5 + +/* MXT_GEN_POWER_T7 field */ +#define MXT_POWER_IDLEACQINT 0 +#define MXT_POWER_ACTVACQINT 1 +#define MXT_POWER_ACTV2IDLETO 2 + +/* MXT_GEN_ACQUIRE_T8 field */ +#define MXT_ACQUIRE_CHRGTIME 0 +#define MXT_ACQUIRE_TCHDRIFT 2 +#define MXT_ACQUIRE_DRIFTST 3 +#define MXT_ACQUIRE_TCHAUTOCAL 4 +#define MXT_ACQUIRE_SYNC 5 +#define MXT_ACQUIRE_ATCHCALST 6 +#define MXT_ACQUIRE_ATCHCALSTHR 7 + +/* MXT_TOUCH_MULTI_T9 field */ +#define MXT_TOUCH_CTRL 0 +#define MXT_TOUCH_XORIGIN 1 +#define MXT_TOUCH_YORIGIN 2 +#define MXT_TOUCH_XSIZE 3 +#define MXT_TOUCH_YSIZE 4 +#define MXT_TOUCH_BLEN 6 +#define MXT_TOUCH_TCHTHR 7 +#define MXT_TOUCH_TCHDI 8 +#define MXT_TOUCH_ORIENT 9 +#define MXT_TOUCH_MOVHYSTI 11 +#define MXT_TOUCH_MOVHYSTN 12 +#define MXT_TOUCH_NUMTOUCH 14 +#define MXT_TOUCH_MRGHYST 15 +#define MXT_TOUCH_MRGTHR 16 +#define MXT_TOUCH_AMPHYST 17 +#define MXT_TOUCH_XRANGE_LSB 18 +#define MXT_TOUCH_XRANGE_MSB 19 +#define MXT_TOUCH_YRANGE_LSB 20 +#define MXT_TOUCH_YRANGE_MSB 21 +#define MXT_TOUCH_XLOCLIP 22 +#define MXT_TOUCH_XHICLIP 23 +#define MXT_TOUCH_YLOCLIP 24 +#define MXT_TOUCH_YHICLIP 25 +#define MXT_TOUCH_XEDGECTRL 26 +#define MXT_TOUCH_XEDGEDIST 27 +#define MXT_TOUCH_YEDGECTRL 28 +#define MXT_TOUCH_YEDGEDIST 29 +#define MXT_TOUCH_JUMPLIMIT 30 + +/* MXT_PROCI_GRIPFACE_T20 field */ +#define MXT_GRIPFACE_CTRL 0 +#define MXT_GRIPFACE_XLOGRIP 1 +#define MXT_GRIPFACE_XHIGRIP 2 +#define MXT_GRIPFACE_YLOGRIP 3 +#define MXT_GRIPFACE_YHIGRIP 4 +#define MXT_GRIPFACE_MAXTCHS 5 +#define MXT_GRIPFACE_SZTHR1 7 +#define MXT_GRIPFACE_SZTHR2 8 +#define MXT_GRIPFACE_SHPTHR1 9 +#define MXT_GRIPFACE_SHPTHR2 10 +#define MXT_GRIPFACE_SUPEXTTO 11 + +/* MXT_PROCI_NOISE field */ +#define MXT_NOISE_CTRL 0 +#define MXT_NOISE_OUTFLEN 1 +#define MXT_NOISE_GCAFUL_LSB 3 +#define MXT_NOISE_GCAFUL_MSB 4 +#define MXT_NOISE_GCAFLL_LSB 5 +#define MXT_NOISE_GCAFLL_MSB 6 +#define MXT_NOISE_ACTVGCAFVALID 7 +#define MXT_NOISE_NOISETHR 8 +#define MXT_NOISE_FREQHOPSCALE 10 +#define MXT_NOISE_FREQ0 11 +#define MXT_NOISE_FREQ1 12 +#define MXT_NOISE_FREQ2 13 +#define MXT_NOISE_FREQ3 14 +#define MXT_NOISE_FREQ4 15 +#define MXT_NOISE_IDLEGCAFVALID 16 + +/* MXT_SPT_COMMSCONFIG_T18 */ +#define MXT_COMMS_CTRL 0 +#define MXT_COMMS_CMD 1 + +/* MXT_SPT_CTECONFIG_T28 field */ +#define MXT_CTE_CTRL 0 +#define MXT_CTE_CMD 1 +#define MXT_CTE_MODE 2 +#define MXT_CTE_IDLEGCAFDEPTH 3 +#define MXT_CTE_ACTVGCAFDEPTH 4 +#define MXT_CTE_VOLTAGE 5 + +#define MXT_VOLTAGE_DEFAULT 2700000 +#define MXT_VOLTAGE_STEP 10000 + +/* Define for MXT_GEN_COMMAND_T6 */ +#define MXT_BOOT_VALUE 0xa5 +#define MXT_BACKUP_VALUE 0x55 +#define MXT_BACKUP_TIME 25 /* msec */ +#define MXT_RESET_TIME 65 /* msec */ + +#define MXT_FWRESET_TIME 175 /* msec */ + +/* Command to unlock bootloader */ +#define MXT_UNLOCK_CMD_MSB 0xaa +#define MXT_UNLOCK_CMD_LSB 0xdc + +/* Bootloader mode status */ +#define MXT_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */ +#define MXT_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */ +#define MXT_FRAME_CRC_CHECK 0x02 +#define MXT_FRAME_CRC_FAIL 0x03 +#define MXT_FRAME_CRC_PASS 0x04 +#define MXT_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */ +#define MXT_BOOT_STATUS_MASK 0x3f + +/* Touch status */ +#define MXT_SUPPRESS (1 << 1) +#define MXT_AMP (1 << 2) +#define MXT_VECTOR (1 << 3) +#define MXT_MOVE (1 << 4) +#define MXT_RELEASE (1 << 5) +#define MXT_PRESS (1 << 6) +#define MXT_DETECT (1 << 7) + +/* Touch orient bits */ +#define MXT_XY_SWITCH (1 << 0) +#define MXT_X_INVERT (1 << 1) +#define MXT_Y_INVERT (1 << 2) + +/* Touchscreen absolute values */ +#define MXT_MAX_AREA 0xff + +#define MXT_MAX_FINGER 10 + +struct mxt_info { + u8 family_id; + u8 variant_id; + u8 version; + u8 build; + u8 matrix_xsize; + u8 matrix_ysize; + u8 object_num; +}; + +struct mxt_object { + u8 type; + u16 start_address; + u8 size; + u8 instances; + u8 num_report_ids; + + /* to map object and message */ + u8 max_reportid; +}; + +struct mxt_message { + u8 reportid; + u8 message[7]; + u8 checksum; +}; + +struct mxt_finger { + int status; + int x; + int y; + int area; + int pressure; +}; + +/* Each client has this additional data */ +struct mxt_data { + struct i2c_client *client; + struct input_dev *input_dev; + const struct mxt_platform_data *pdata; + struct mxt_object *object_table; + struct mxt_info info; + struct mxt_finger finger[MXT_MAX_FINGER]; + unsigned int irq; + unsigned int max_x; + unsigned int max_y; +}; + +static bool mxt_object_readable(unsigned int type) +{ + switch (type) { + case MXT_GEN_MESSAGE_T5: + case MXT_GEN_COMMAND_T6: + case MXT_GEN_POWER_T7: + case MXT_GEN_ACQUIRE_T8: + case MXT_GEN_DATASOURCE_T53: + case MXT_TOUCH_MULTI_T9: + case MXT_TOUCH_KEYARRAY_T15: + case MXT_TOUCH_PROXIMITY_T23: + case MXT_TOUCH_PROXKEY_T52: + case MXT_PROCI_GRIPFACE_T20: + case MXT_PROCG_NOISE_T22: + case MXT_PROCI_ONETOUCH_T24: + case MXT_PROCI_TWOTOUCH_T27: + case MXT_PROCI_GRIP_T40: + case MXT_PROCI_PALM_T41: + case MXT_PROCI_TOUCHSUPPRESSION_T42: + case MXT_PROCI_STYLUS_T47: + case MXT_PROCG_NOISESUPPRESSION_T48: + case MXT_SPT_COMMSCONFIG_T18: + case MXT_SPT_GPIOPWM_T19: + case MXT_SPT_SELFTEST_T25: + case MXT_SPT_CTECONFIG_T28: + case MXT_SPT_USERDATA_T38: + case MXT_SPT_DIGITIZER_T43: + case MXT_SPT_CTECONFIG_T46: + return true; + default: + return false; + } +} + +static bool mxt_object_writable(unsigned int type) +{ + switch (type) { + case MXT_GEN_COMMAND_T6: + case MXT_GEN_POWER_T7: + case MXT_GEN_ACQUIRE_T8: + case MXT_TOUCH_MULTI_T9: + case MXT_TOUCH_KEYARRAY_T15: + case MXT_TOUCH_PROXIMITY_T23: + case MXT_TOUCH_PROXKEY_T52: + case MXT_PROCI_GRIPFACE_T20: + case MXT_PROCG_NOISE_T22: + case MXT_PROCI_ONETOUCH_T24: + case MXT_PROCI_TWOTOUCH_T27: + case MXT_PROCI_GRIP_T40: + case MXT_PROCI_PALM_T41: + case MXT_PROCI_TOUCHSUPPRESSION_T42: + case MXT_PROCI_STYLUS_T47: + case MXT_PROCG_NOISESUPPRESSION_T48: + case MXT_SPT_COMMSCONFIG_T18: + case MXT_SPT_GPIOPWM_T19: + case MXT_SPT_SELFTEST_T25: + case MXT_SPT_CTECONFIG_T28: + case MXT_SPT_DIGITIZER_T43: + case MXT_SPT_CTECONFIG_T46: + return true; + default: + return false; + } +} + +static void mxt_dump_message(struct device *dev, + struct mxt_message *message) +{ + dev_dbg(dev, "reportid:\t0x%x\n", message->reportid); + dev_dbg(dev, "message1:\t0x%x\n", message->message[0]); + dev_dbg(dev, "message2:\t0x%x\n", message->message[1]); + dev_dbg(dev, "message3:\t0x%x\n", message->message[2]); + dev_dbg(dev, "message4:\t0x%x\n", message->message[3]); + dev_dbg(dev, "message5:\t0x%x\n", message->message[4]); + dev_dbg(dev, "message6:\t0x%x\n", message->message[5]); + dev_dbg(dev, "message7:\t0x%x\n", message->message[6]); + dev_dbg(dev, "checksum:\t0x%x\n", message->checksum); +} + +static int mxt_check_bootloader(struct i2c_client *client, + unsigned int state) +{ + u8 val; + +recheck: + if (i2c_master_recv(client, &val, 1) != 1) { + dev_err(&client->dev, "%s: i2c recv failed\n", __func__); + return -EIO; + } + + switch (state) { + case MXT_WAITING_BOOTLOAD_CMD: + case MXT_WAITING_FRAME_DATA: + val &= ~MXT_BOOT_STATUS_MASK; + break; + case MXT_FRAME_CRC_PASS: + if (val == MXT_FRAME_CRC_CHECK) + goto recheck; + break; + default: + return -EINVAL; + } + + if (val != state) { + dev_err(&client->dev, "Unvalid bootloader mode state\n"); + return -EINVAL; + } + + return 0; +} + +static int mxt_unlock_bootloader(struct i2c_client *client) +{ + u8 buf[2]; + + buf[0] = MXT_UNLOCK_CMD_LSB; + buf[1] = MXT_UNLOCK_CMD_MSB; + + if (i2c_master_send(client, buf, 2) != 2) { + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int mxt_fw_write(struct i2c_client *client, + const u8 *data, unsigned int frame_size) +{ + if (i2c_master_send(client, data, frame_size) != frame_size) { + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int __mxt_read_reg(struct i2c_client *client, + u16 reg, u16 len, void *val) +{ + struct i2c_msg xfer[2]; + u8 buf[2]; + + buf[0] = reg & 0xff; + buf[1] = (reg >> 8) & 0xff; + + /* Write register */ + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 2; + xfer[0].buf = buf; + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = len; + xfer[1].buf = val; + + if (i2c_transfer(client->adapter, xfer, 2) != 2) { + dev_err(&client->dev, "%s: i2c transfer failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val) +{ + return __mxt_read_reg(client, reg, 1, val); +} + +static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val) +{ + u8 buf[3]; + + buf[0] = reg & 0xff; + buf[1] = (reg >> 8) & 0xff; + buf[2] = val; + + if (i2c_master_send(client, buf, 3) != 3) { + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int mxt_read_object_table(struct i2c_client *client, + u16 reg, u8 *object_buf) +{ + return __mxt_read_reg(client, reg, MXT_OBJECT_SIZE, + object_buf); +} + +static struct mxt_object * +mxt_get_object(struct mxt_data *data, u8 type) +{ + struct mxt_object *object; + int i; + + for (i = 0; i < data->info.object_num; i++) { + object = data->object_table + i; + if (object->type == type) + return object; + } + + dev_err(&data->client->dev, "Invalid object type\n"); + return NULL; +} + +static int mxt_read_message(struct mxt_data *data, + struct mxt_message *message) +{ + struct mxt_object *object; + u16 reg; + + object = mxt_get_object(data, MXT_GEN_MESSAGE_T5); + if (!object) + return -EINVAL; + + reg = object->start_address; + return __mxt_read_reg(data->client, reg, + sizeof(struct mxt_message), message); +} + +static int mxt_read_object(struct mxt_data *data, + u8 type, u8 offset, u8 *val) +{ + struct mxt_object *object; + u16 reg; + + object = mxt_get_object(data, type); + if (!object) + return -EINVAL; + + reg = object->start_address; + return __mxt_read_reg(data->client, reg + offset, 1, val); +} + +static int mxt_write_object(struct mxt_data *data, + u8 type, u8 offset, u8 val) +{ + struct mxt_object *object; + u16 reg; + + object = mxt_get_object(data, type); + if (!object) + return -EINVAL; + + reg = object->start_address; + return mxt_write_reg(data->client, reg + offset, val); +} + +static void mxt_input_report(struct mxt_data *data, int single_id) +{ + struct mxt_finger *finger = data->finger; + struct input_dev *input_dev = data->input_dev; + int status = finger[single_id].status; + int finger_num = 0; + int id; + + for (id = 0; id < MXT_MAX_FINGER; id++) { + if (!finger[id].status) + continue; + + input_mt_slot(input_dev, id); + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, + finger[id].status != MXT_RELEASE); + + if (finger[id].status != MXT_RELEASE) { + finger_num++; + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, + finger[id].area); + input_report_abs(input_dev, ABS_MT_POSITION_X, + finger[id].x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, + finger[id].y); + input_report_abs(input_dev, ABS_MT_PRESSURE, + finger[id].pressure); + } else { + finger[id].status = 0; + } + } + + input_report_key(input_dev, BTN_TOUCH, finger_num > 0); + + if (status != MXT_RELEASE) { + input_report_abs(input_dev, ABS_X, finger[single_id].x); + input_report_abs(input_dev, ABS_Y, finger[single_id].y); + input_report_abs(input_dev, + ABS_PRESSURE, finger[single_id].pressure); + } + + input_sync(input_dev); +} + +static void mxt_input_touchevent(struct mxt_data *data, + struct mxt_message *message, int id) +{ + struct mxt_finger *finger = data->finger; + struct device *dev = &data->client->dev; + u8 status = message->message[0]; + int x; + int y; + int area; + int pressure; + + /* Check the touch is present on the screen */ + if (!(status & MXT_DETECT)) { + if (status & MXT_RELEASE) { + dev_dbg(dev, "[%d] released\n", id); + + finger[id].status = MXT_RELEASE; + mxt_input_report(data, id); + } + return; + } + + /* Check only AMP detection */ + if (!(status & (MXT_PRESS | MXT_MOVE))) + return; + + x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf); + y = (message->message[2] << 4) | ((message->message[3] & 0xf)); + if (data->max_x < 1024) + x = x >> 2; + if (data->max_y < 1024) + y = y >> 2; + + area = message->message[4]; + pressure = message->message[5]; + + dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id, + status & MXT_MOVE ? "moved" : "pressed", + x, y, area); + + finger[id].status = status & MXT_MOVE ? + MXT_MOVE : MXT_PRESS; + finger[id].x = x; + finger[id].y = y; + finger[id].area = area; + finger[id].pressure = pressure; + + mxt_input_report(data, id); +} + +static irqreturn_t mxt_interrupt(int irq, void *dev_id) +{ + struct mxt_data *data = dev_id; + struct mxt_message message; + struct mxt_object *object; + struct device *dev = &data->client->dev; + int id; + u8 reportid; + u8 max_reportid; + u8 min_reportid; + + do { + if (mxt_read_message(data, &message)) { + dev_err(dev, "Failed to read message\n"); + goto end; + } + + reportid = message.reportid; + + /* whether reportid is thing of MXT_TOUCH_MULTI_T9 */ + object = mxt_get_object(data, MXT_TOUCH_MULTI_T9); + if (!object) + goto end; + + max_reportid = object->max_reportid; + min_reportid = max_reportid - object->num_report_ids + 1; + id = reportid - min_reportid; + + if (reportid >= min_reportid && reportid <= max_reportid) + mxt_input_touchevent(data, &message, id); + else + mxt_dump_message(dev, &message); + } while (reportid != 0xff); + +end: + return IRQ_HANDLED; +} + +static int mxt_check_reg_init(struct mxt_data *data) +{ + const struct mxt_platform_data *pdata = data->pdata; + struct mxt_object *object; + struct device *dev = &data->client->dev; + int index = 0; + int i, j, config_offset; + + if (!pdata->config) { + dev_dbg(dev, "No cfg data defined, skipping reg init\n"); + return 0; + } + + for (i = 0; i < data->info.object_num; i++) { + object = data->object_table + i; + + if (!mxt_object_writable(object->type)) + continue; + + for (j = 0; + j < (object->size + 1) * (object->instances + 1); + j++) { + config_offset = index + j; + if (config_offset > pdata->config_length) { + dev_err(dev, "Not enough config data!\n"); + return -EINVAL; + } + mxt_write_object(data, object->type, j, + pdata->config[config_offset]); + } + index += (object->size + 1) * (object->instances + 1); + } + + return 0; +} + +static int mxt_make_highchg(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + struct mxt_message message; + int count = 10; + int error; + + /* Read dummy message to make high CHG pin */ + do { + error = mxt_read_message(data, &message); + if (error) + return error; + } while (message.reportid != 0xff && --count); + + if (!count) { + dev_err(dev, "CHG pin isn't cleared\n"); + return -EBUSY; + } + + return 0; +} + +static void mxt_handle_pdata(struct mxt_data *data) +{ + const struct mxt_platform_data *pdata = data->pdata; + u8 voltage; + + /* Set touchscreen lines */ + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE, + pdata->x_line); + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE, + pdata->y_line); + + /* Set touchscreen orient */ + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT, + pdata->orient); + + /* Set touchscreen burst length */ + mxt_write_object(data, MXT_TOUCH_MULTI_T9, + MXT_TOUCH_BLEN, pdata->blen); + + /* Set touchscreen threshold */ + mxt_write_object(data, MXT_TOUCH_MULTI_T9, + MXT_TOUCH_TCHTHR, pdata->threshold); + + /* Set touchscreen resolution */ + mxt_write_object(data, MXT_TOUCH_MULTI_T9, + MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff); + mxt_write_object(data, MXT_TOUCH_MULTI_T9, + MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8); + mxt_write_object(data, MXT_TOUCH_MULTI_T9, + MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff); + mxt_write_object(data, MXT_TOUCH_MULTI_T9, + MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8); + + /* Set touchscreen voltage */ + if (pdata->voltage) { + if (pdata->voltage < MXT_VOLTAGE_DEFAULT) { + voltage = (MXT_VOLTAGE_DEFAULT - pdata->voltage) / + MXT_VOLTAGE_STEP; + voltage = 0xff - voltage + 1; + } else + voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) / + MXT_VOLTAGE_STEP; + + mxt_write_object(data, MXT_SPT_CTECONFIG_T28, + MXT_CTE_VOLTAGE, voltage); + } +} + +static int mxt_get_info(struct mxt_data *data) +{ + struct i2c_client *client = data->client; + struct mxt_info *info = &data->info; + int error; + u8 val; + + error = mxt_read_reg(client, MXT_FAMILY_ID, &val); + if (error) + return error; + info->family_id = val; + + error = mxt_read_reg(client, MXT_VARIANT_ID, &val); + if (error) + return error; + info->variant_id = val; + + error = mxt_read_reg(client, MXT_VERSION, &val); + if (error) + return error; + info->version = val; + + error = mxt_read_reg(client, MXT_BUILD, &val); + if (error) + return error; + info->build = val; + + error = mxt_read_reg(client, MXT_OBJECT_NUM, &val); + if (error) + return error; + info->object_num = val; + + return 0; +} + +static int mxt_get_object_table(struct mxt_data *data) +{ + int error; + int i; + u16 reg; + u8 reportid = 0; + u8 buf[MXT_OBJECT_SIZE]; + + for (i = 0; i < data->info.object_num; i++) { + struct mxt_object *object = data->object_table + i; + + reg = MXT_OBJECT_START + MXT_OBJECT_SIZE * i; + error = mxt_read_object_table(data->client, reg, buf); + if (error) + return error; + + object->type = buf[0]; + object->start_address = (buf[2] << 8) | buf[1]; + object->size = buf[3]; + object->instances = buf[4]; + object->num_report_ids = buf[5]; + + if (object->num_report_ids) { + reportid += object->num_report_ids * + (object->instances + 1); + object->max_reportid = reportid; + } + } + + return 0; +} + +static int mxt_initialize(struct mxt_data *data) +{ + struct i2c_client *client = data->client; + struct mxt_info *info = &data->info; + int error; + u8 val; + + error = mxt_get_info(data); + if (error) + return error; + + data->object_table = kcalloc(info->object_num, + sizeof(struct mxt_object), + GFP_KERNEL); + if (!data->object_table) { + dev_err(&client->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + /* Get object table information */ + error = mxt_get_object_table(data); + if (error) + return error; + + /* Check register init values */ + error = mxt_check_reg_init(data); + if (error) + return error; + + mxt_handle_pdata(data); + + /* Backup to memory */ + mxt_write_object(data, MXT_GEN_COMMAND_T6, + MXT_COMMAND_BACKUPNV, + MXT_BACKUP_VALUE); + msleep(MXT_BACKUP_TIME); + + /* Soft reset */ + mxt_write_object(data, MXT_GEN_COMMAND_T6, + MXT_COMMAND_RESET, 1); + msleep(MXT_RESET_TIME); + + /* Update matrix size at info struct */ + error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val); + if (error) + return error; + info->matrix_xsize = val; + + error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val); + if (error) + return error; + info->matrix_ysize = val; + + dev_info(&client->dev, + "Family ID: %d Variant ID: %d Version: %d Build: %d\n", + info->family_id, info->variant_id, info->version, + info->build); + + dev_info(&client->dev, + "Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n", + info->matrix_xsize, info->matrix_ysize, + info->object_num); + + return 0; +} + +static void mxt_calc_resolution(struct mxt_data *data) +{ + unsigned int max_x = data->pdata->x_size - 1; + unsigned int max_y = data->pdata->y_size - 1; + + if (data->pdata->orient & MXT_XY_SWITCH) { + data->max_x = max_y; + data->max_y = max_x; + } else { + data->max_x = max_x; + data->max_y = max_y; + } +} + +static ssize_t mxt_object_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mxt_data *data = dev_get_drvdata(dev); + struct mxt_object *object; + int count = 0; + int i, j; + int error; + u8 val; + + for (i = 0; i < data->info.object_num; i++) { + object = data->object_table + i; + + count += snprintf(buf + count, PAGE_SIZE - count, + "Object[%d] (Type %d)\n", + i + 1, object->type); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; + + if (!mxt_object_readable(object->type)) { + count += snprintf(buf + count, PAGE_SIZE - count, + "\n"); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; + continue; + } + + for (j = 0; j < object->size + 1; j++) { + error = mxt_read_object(data, + object->type, j, &val); + if (error) + return error; + + count += snprintf(buf + count, PAGE_SIZE - count, + "\t[%2d]: %02x (%d)\n", j, val, val); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; + } + + count += snprintf(buf + count, PAGE_SIZE - count, "\n"); + if (count >= PAGE_SIZE) + return PAGE_SIZE - 1; + } + + return count; +} + +static int mxt_load_fw(struct device *dev, const char *fn) +{ + struct mxt_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + const struct firmware *fw = NULL; + unsigned int frame_size; + unsigned int pos = 0; + int ret; + + ret = request_firmware(&fw, fn, dev); + if (ret) { + dev_err(dev, "Unable to open firmware %s\n", fn); + return ret; + } + + /* Change to the bootloader mode */ + mxt_write_object(data, MXT_GEN_COMMAND_T6, + MXT_COMMAND_RESET, MXT_BOOT_VALUE); + msleep(MXT_RESET_TIME); + + /* Change to slave address of bootloader */ + if (client->addr == MXT_APP_LOW) + client->addr = MXT_BOOT_LOW; + else + client->addr = MXT_BOOT_HIGH; + + ret = mxt_check_bootloader(client, MXT_WAITING_BOOTLOAD_CMD); + if (ret) + goto out; + + /* Unlock bootloader */ + mxt_unlock_bootloader(client); + + while (pos < fw->size) { + ret = mxt_check_bootloader(client, + MXT_WAITING_FRAME_DATA); + if (ret) + goto out; + + frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1)); + + /* We should add 2 at frame size as the the firmware data is not + * included the CRC bytes. + */ + frame_size += 2; + + /* Write one frame to device */ + mxt_fw_write(client, fw->data + pos, frame_size); + + ret = mxt_check_bootloader(client, + MXT_FRAME_CRC_PASS); + if (ret) + goto out; + + pos += frame_size; + + dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size); + } + +out: + release_firmware(fw); + + /* Change to slave address of application */ + if (client->addr == MXT_BOOT_LOW) + client->addr = MXT_APP_LOW; + else + client->addr = MXT_APP_HIGH; + + return ret; +} + +static ssize_t mxt_update_fw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mxt_data *data = dev_get_drvdata(dev); + int error; + + disable_irq(data->irq); + + error = mxt_load_fw(dev, MXT_FW_NAME); + if (error) { + dev_err(dev, "The firmware update failed(%d)\n", error); + count = error; + } else { + dev_dbg(dev, "The firmware update succeeded\n"); + + /* Wait for reset */ + msleep(MXT_FWRESET_TIME); + + kfree(data->object_table); + data->object_table = NULL; + + mxt_initialize(data); + } + + enable_irq(data->irq); + + error = mxt_make_highchg(data); + if (error) + return error; + + return count; +} + +static DEVICE_ATTR(object, 0444, mxt_object_show, NULL); +static DEVICE_ATTR(update_fw, 0664, NULL, mxt_update_fw_store); + +static struct attribute *mxt_attrs[] = { + &dev_attr_object.attr, + &dev_attr_update_fw.attr, + NULL +}; + +static const struct attribute_group mxt_attr_group = { + .attrs = mxt_attrs, +}; + +static void mxt_start(struct mxt_data *data) +{ + /* Touch enable */ + mxt_write_object(data, + MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); +} + +static void mxt_stop(struct mxt_data *data) +{ + /* Touch disable */ + mxt_write_object(data, + MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); +} + +static int mxt_input_open(struct input_dev *dev) +{ + struct mxt_data *data = input_get_drvdata(dev); + + mxt_start(data); + + return 0; +} + +static void mxt_input_close(struct input_dev *dev) +{ + struct mxt_data *data = input_get_drvdata(dev); + + mxt_stop(data); +} + +static int __devinit mxt_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct mxt_platform_data *pdata = client->dev.platform_data; + struct mxt_data *data; + struct input_dev *input_dev; + int error; + + if (!pdata) + return -EINVAL; + + data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + input_dev->name = "Atmel maXTouch Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + input_dev->open = mxt_input_open; + input_dev->close = mxt_input_close; + + data->client = client; + data->input_dev = input_dev; + data->pdata = pdata; + data->irq = client->irq; + + mxt_calc_resolution(data); + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, + 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, 255, 0, 0); + + /* For multi touch */ + input_mt_init_slots(input_dev, MXT_MAX_FINGER); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, MXT_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); + + input_set_drvdata(input_dev, data); + i2c_set_clientdata(client, data); + + error = mxt_initialize(data); + if (error) + goto err_free_object; + + error = request_threaded_irq(client->irq, NULL, mxt_interrupt, + pdata->irqflags, client->dev.driver->name, data); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_object; + } + + error = mxt_make_highchg(data); + if (error) + goto err_free_irq; + + error = input_register_device(input_dev); + if (error) + goto err_free_irq; + + error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group); + if (error) + goto err_unregister_device; + + return 0; + +err_unregister_device: + input_unregister_device(input_dev); + input_dev = NULL; +err_free_irq: + free_irq(client->irq, data); +err_free_object: + kfree(data->object_table); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return error; +} + +static int __devexit mxt_remove(struct i2c_client *client) +{ + struct mxt_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &mxt_attr_group); + free_irq(data->irq, data); + input_unregister_device(data->input_dev); + kfree(data->object_table); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int mxt_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mxt_data *data = i2c_get_clientdata(client); + struct input_dev *input_dev = data->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + mxt_stop(data); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int mxt_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mxt_data *data = i2c_get_clientdata(client); + struct input_dev *input_dev = data->input_dev; + + /* Soft reset */ + mxt_write_object(data, MXT_GEN_COMMAND_T6, + MXT_COMMAND_RESET, 1); + + msleep(MXT_RESET_TIME); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + mxt_start(data); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static const struct dev_pm_ops mxt_pm_ops = { + .suspend = mxt_suspend, + .resume = mxt_resume, +}; +#endif + +static const struct i2c_device_id mxt_id[] = { + { "qt602240_ts", 0 }, + { "atmel_mxt_ts", 0 }, + { "mXT224", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mxt_id); + +static struct i2c_driver mxt_driver = { + .driver = { + .name = "atmel_mxt_ts", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &mxt_pm_ops, +#endif + }, + .probe = mxt_probe, + .remove = __devexit_p(mxt_remove), + .id_table = mxt_id, +}; + +module_i2c_driver(mxt_driver); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/atmel_tsadcc.c b/ANDROID_3.4.5/drivers/input/touchscreen/atmel_tsadcc.c new file mode 100644 index 00000000..201b2d2e --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/atmel_tsadcc.c @@ -0,0 +1,359 @@ +/* + * Atmel Touch Screen Driver + * + * Copyright (c) 2008 ATMEL + * Copyright (c) 2008 Dan Liang + * Copyright (c) 2008 TimeSys Corporation + * Copyright (c) 2008 Justin Waters + * + * Based on touchscreen code from Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <mach/board.h> +#include <mach/cpu.h> + +/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */ + +#define ATMEL_TSADCC_CR 0x00 /* Control register */ +#define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/ +#define ATMEL_TSADCC_START (1 << 1) /* Start conversion */ + +#define ATMEL_TSADCC_MR 0x04 /* Mode register */ +#define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */ +#define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */ +#define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */ +#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */ +#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */ +#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */ +#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */ +#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */ +#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */ +#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */ +#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */ + +#define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */ +#define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */ +#define ATMEL_TSADCC_TRGMOD_NONE (0 << 0) +#define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0) +#define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0) +#define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0) +#define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0) +#define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0) +#define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0) +#define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */ + +#define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */ +#define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */ +#define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */ + +#define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */ +#define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */ +#define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */ +#define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */ + +#define ATMEL_TSADCC_SR 0x1C /* Status register */ +#define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */ +#define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */ +#define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */ +#define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */ +#define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */ +#define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */ +#define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */ +#define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */ + +#define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */ +#define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */ + +#define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */ +#define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */ +#define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */ +#define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */ +#define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */ +#define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */ +#define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */ +#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */ +#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */ + +#define ATMEL_TSADCC_XPOS 0x50 +#define ATMEL_TSADCC_Z1DAT 0x54 +#define ATMEL_TSADCC_Z2DAT 0x58 + +#define PRESCALER_VAL(x) ((x) >> 8) + +#define ADC_DEFAULT_CLOCK 100000 + +struct atmel_tsadcc { + struct input_dev *input; + char phys[32]; + struct clk *clk; + int irq; + unsigned int prev_absx; + unsigned int prev_absy; + unsigned char bufferedmeasure; +}; + +static void __iomem *tsc_base; + +#define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg)) +#define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg)) + +static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev) +{ + struct atmel_tsadcc *ts_dev = (struct atmel_tsadcc *)dev; + struct input_dev *input_dev = ts_dev->input; + + unsigned int status; + unsigned int reg; + + status = atmel_tsadcc_read(ATMEL_TSADCC_SR); + status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR); + + if (status & ATMEL_TSADCC_NOCNT) { + /* Contact lost */ + reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC; + + atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); + atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE); + atmel_tsadcc_write(ATMEL_TSADCC_IDR, + ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT); + atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT); + + input_report_key(input_dev, BTN_TOUCH, 0); + ts_dev->bufferedmeasure = 0; + input_sync(input_dev); + + } else if (status & ATMEL_TSADCC_PENCNT) { + /* Pen detected */ + reg = atmel_tsadcc_read(ATMEL_TSADCC_MR); + reg &= ~ATMEL_TSADCC_PENDBC; + + atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT); + atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); + atmel_tsadcc_write(ATMEL_TSADCC_IER, + ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT); + atmel_tsadcc_write(ATMEL_TSADCC_TRGR, + ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16)); + + } else if (status & ATMEL_TSADCC_EOC(3)) { + /* Conversion finished */ + + if (ts_dev->bufferedmeasure) { + /* Last measurement is always discarded, since it can + * be erroneous. + * Always report previous measurement */ + input_report_abs(input_dev, ABS_X, ts_dev->prev_absx); + input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy); + input_report_key(input_dev, BTN_TOUCH, 1); + input_sync(input_dev); + } else + ts_dev->bufferedmeasure = 1; + + /* Now make new measurement */ + ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10; + ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2); + + ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10; + ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0); + } + + return IRQ_HANDLED; +} + +/* + * The functions for inserting/removing us as a module. + */ + +static int __devinit atmel_tsadcc_probe(struct platform_device *pdev) +{ + struct atmel_tsadcc *ts_dev; + struct input_dev *input_dev; + struct resource *res; + struct at91_tsadcc_data *pdata = pdev->dev.platform_data; + int err = 0; + unsigned int prsc; + unsigned int reg; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no mmio resource defined.\n"); + return -ENXIO; + } + + /* Allocate memory for device */ + ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL); + if (!ts_dev) { + dev_err(&pdev->dev, "failed to allocate memory.\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, ts_dev); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device.\n"); + err = -EBUSY; + goto err_free_mem; + } + + ts_dev->irq = platform_get_irq(pdev, 0); + if (ts_dev->irq < 0) { + dev_err(&pdev->dev, "no irq ID is designated.\n"); + err = -ENODEV; + goto err_free_dev; + } + + if (!request_mem_region(res->start, resource_size(res), + "atmel tsadcc regs")) { + dev_err(&pdev->dev, "resources is unavailable.\n"); + err = -EBUSY; + goto err_free_dev; + } + + tsc_base = ioremap(res->start, resource_size(res)); + if (!tsc_base) { + dev_err(&pdev->dev, "failed to map registers.\n"); + err = -ENOMEM; + goto err_release_mem; + } + + err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0, + pdev->dev.driver->name, ts_dev); + if (err) { + dev_err(&pdev->dev, "failed to allocate irq.\n"); + goto err_unmap_regs; + } + + ts_dev->clk = clk_get(&pdev->dev, "tsc_clk"); + if (IS_ERR(ts_dev->clk)) { + dev_err(&pdev->dev, "failed to get ts_clk\n"); + err = PTR_ERR(ts_dev->clk); + goto err_free_irq; + } + + ts_dev->input = input_dev; + ts_dev->bufferedmeasure = 0; + + snprintf(ts_dev->phys, sizeof(ts_dev->phys), + "%s/input0", dev_name(&pdev->dev)); + + input_dev->name = "atmel touch screen controller"; + input_dev->phys = ts_dev->phys; + input_dev->dev.parent = &pdev->dev; + + __set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0); + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + + /* clk_enable() always returns 0, no need to check it */ + clk_enable(ts_dev->clk); + + prsc = clk_get_rate(ts_dev->clk); + dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc); + + if (!pdata) + goto err_fail; + + if (!pdata->adc_clock) + pdata->adc_clock = ADC_DEFAULT_CLOCK; + + prsc = (prsc / (2 * pdata->adc_clock)) - 1; + + /* saturate if this value is too high */ + if (cpu_is_at91sam9rl()) { + if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL)) + prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL); + } else { + if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL)) + prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL); + } + + dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc); + + reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE | + ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */ + ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */ + (prsc << 8) | + ((0x26 << 16) & ATMEL_TSADCC_STARTUP) | + ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC); + + atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST); + atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); + atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE); + atmel_tsadcc_write(ATMEL_TSADCC_TSR, + (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM); + + atmel_tsadcc_read(ATMEL_TSADCC_SR); + atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT); + + /* All went ok, so register to the input system */ + err = input_register_device(input_dev); + if (err) + goto err_fail; + + return 0; + +err_fail: + clk_disable(ts_dev->clk); + clk_put(ts_dev->clk); +err_free_irq: + free_irq(ts_dev->irq, ts_dev); +err_unmap_regs: + iounmap(tsc_base); +err_release_mem: + release_mem_region(res->start, resource_size(res)); +err_free_dev: + input_free_device(input_dev); +err_free_mem: + kfree(ts_dev); + return err; +} + +static int __devexit atmel_tsadcc_remove(struct platform_device *pdev) +{ + struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev); + struct resource *res; + + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(tsc_base); + release_mem_region(res->start, resource_size(res)); + + clk_disable(ts_dev->clk); + clk_put(ts_dev->clk); + + kfree(ts_dev); + + return 0; +} + +static struct platform_driver atmel_tsadcc_driver = { + .probe = atmel_tsadcc_probe, + .remove = __devexit_p(atmel_tsadcc_remove), + .driver = { + .name = "atmel_tsadcc", + }, +}; +module_platform_driver(atmel_tsadcc_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Atmel TouchScreen Driver"); +MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>"); + diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/auo-pixcir-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/auo-pixcir-ts.c new file mode 100644 index 00000000..c7047b6b --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/auo-pixcir-ts.c @@ -0,0 +1,642 @@ +/* + * Driver for AUO in-cell touchscreens + * + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * loosely based on auo_touch.c from Dell Streak vendor-kernel + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2008 QUALCOMM USA, INC. + * + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/input/auo-pixcir-ts.h> + +/* + * Coordinate calculation: + * X1 = X1_LSB + X1_MSB*256 + * Y1 = Y1_LSB + Y1_MSB*256 + * X2 = X2_LSB + X2_MSB*256 + * Y2 = Y2_LSB + Y2_MSB*256 + */ +#define AUO_PIXCIR_REG_X1_LSB 0x00 +#define AUO_PIXCIR_REG_X1_MSB 0x01 +#define AUO_PIXCIR_REG_Y1_LSB 0x02 +#define AUO_PIXCIR_REG_Y1_MSB 0x03 +#define AUO_PIXCIR_REG_X2_LSB 0x04 +#define AUO_PIXCIR_REG_X2_MSB 0x05 +#define AUO_PIXCIR_REG_Y2_LSB 0x06 +#define AUO_PIXCIR_REG_Y2_MSB 0x07 + +#define AUO_PIXCIR_REG_STRENGTH 0x0d +#define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e +#define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f + +#define AUO_PIXCIR_REG_RAW_DATA_X 0x2b +#define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f + +#define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f +#define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70 +#define AUO_PIXCIR_REG_INT_SETTING 0x71 +#define AUO_PIXCIR_REG_INT_WIDTH 0x72 +#define AUO_PIXCIR_REG_POWER_MODE 0x73 + +#define AUO_PIXCIR_REG_VERSION 0x77 +#define AUO_PIXCIR_REG_CALIBRATE 0x78 + +#define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e +#define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f +#define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20 +#define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21 + +#define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42 +#define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad + +#define AUO_PIXCIR_INT_TPNUM_MASK 0xe0 +#define AUO_PIXCIR_INT_TPNUM_SHIFT 5 +#define AUO_PIXCIR_INT_RELEASE (1 << 4) +#define AUO_PIXCIR_INT_ENABLE (1 << 3) +#define AUO_PIXCIR_INT_POL_HIGH (1 << 2) +#define AUO_PIXCIR_INT_MODE_MASK 0x03 + +/* + * Power modes: + * active: scan speed 60Hz + * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch + * deep sleep: scan speed 1Hz can only be entered or left manually. + */ +#define AUO_PIXCIR_POWER_ACTIVE 0x00 +#define AUO_PIXCIR_POWER_SLEEP 0x01 +#define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02 +#define AUO_PIXCIR_POWER_MASK 0x03 + +#define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2) +#define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4) + +#define AUO_PIXCIR_CALIBRATE 0x03 + +#define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62 +#define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36 + +#define AUO_PIXCIR_RAW_DATA_X_LEN 18 +#define AUO_PIXCIR_RAW_DATA_Y_LEN 11 + +#define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0) + +/* Touchscreen absolute values */ +#define AUO_PIXCIR_REPORT_POINTS 2 +#define AUO_PIXCIR_MAX_AREA 0xff +#define AUO_PIXCIR_PENUP_TIMEOUT_MS 10 + +struct auo_pixcir_ts { + struct i2c_client *client; + struct input_dev *input; + char phys[32]; + + /* special handling for touch_indicate interupt mode */ + bool touch_ind_mode; + + wait_queue_head_t wait; + bool stopped; +}; + +struct auo_point_t { + int coord_x; + int coord_y; + int area_major; + int area_minor; + int orientation; +}; + +static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts, + struct auo_point_t *point) +{ + struct i2c_client *client = ts->client; + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + uint8_t raw_coord[8]; + uint8_t raw_area[4]; + int i, ret; + + /* touch coordinates */ + ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB, + 8, raw_coord); + if (ret < 0) { + dev_err(&client->dev, "failed to read coordinate, %d\n", ret); + return ret; + } + + /* touch area */ + ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1, + 4, raw_area); + if (ret < 0) { + dev_err(&client->dev, "could not read touch area, %d\n", ret); + return ret; + } + + for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { + point[i].coord_x = + raw_coord[4 * i + 1] << 8 | raw_coord[4 * i]; + point[i].coord_y = + raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2]; + + if (point[i].coord_x > pdata->x_max || + point[i].coord_y > pdata->y_max) { + dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", + point[i].coord_x, point[i].coord_y); + point[i].coord_x = point[i].coord_y = 0; + } + + /* determine touch major, minor and orientation */ + point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]); + point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]); + point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1]; + } + + return 0; +} + +static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id) +{ + struct auo_pixcir_ts *ts = dev_id; + struct i2c_client *client = ts->client; + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS]; + int i; + int ret; + int fingers = 0; + int abs = -1; + + while (!ts->stopped) { + + /* check for up event in touch touch_ind_mode */ + if (ts->touch_ind_mode) { + if (gpio_get_value(pdata->gpio_int) == 0) { + input_mt_sync(ts->input); + input_report_key(ts->input, BTN_TOUCH, 0); + input_sync(ts->input); + break; + } + } + + ret = auo_pixcir_collect_data(ts, point); + if (ret < 0) { + /* we want to loop only in touch_ind_mode */ + if (!ts->touch_ind_mode) + break; + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); + continue; + } + + for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { + if (point[i].coord_x > 0 || point[i].coord_y > 0) { + input_report_abs(ts->input, ABS_MT_POSITION_X, + point[i].coord_x); + input_report_abs(ts->input, ABS_MT_POSITION_Y, + point[i].coord_y); + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, + point[i].area_major); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, + point[i].area_minor); + input_report_abs(ts->input, ABS_MT_ORIENTATION, + point[i].orientation); + input_mt_sync(ts->input); + + /* use first finger as source for singletouch */ + if (fingers == 0) + abs = i; + + /* number of touch points could also be queried + * via i2c but would require an additional call + */ + fingers++; + } + } + + input_report_key(ts->input, BTN_TOUCH, fingers > 0); + + if (abs > -1) { + input_report_abs(ts->input, ABS_X, point[abs].coord_x); + input_report_abs(ts->input, ABS_Y, point[abs].coord_y); + } + + input_sync(ts->input); + + /* we want to loop only in touch_ind_mode */ + if (!ts->touch_ind_mode) + break; + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); + } + + return IRQ_HANDLED; +} + +/* + * Set the power mode of the device. + * Valid modes are + * - AUO_PIXCIR_POWER_ACTIVE + * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch + * - AUO_PIXCIR_POWER_DEEP_SLEEP + */ +static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + ret &= ~AUO_PIXCIR_POWER_MASK; + ret |= mode; + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret); + if (ret) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + return 0; +} + +static __devinit int auo_pixcir_int_config(struct auo_pixcir_ts *ts, + int int_setting) +{ + struct i2c_client *client = ts->client; + struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + ret &= ~AUO_PIXCIR_INT_MODE_MASK; + ret |= int_setting; + ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */ + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, + ret); + if (ret < 0) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND; + + return 0; +} + +/* control the generation of interrupts on the device side */ +static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + if (enable) + ret |= AUO_PIXCIR_INT_ENABLE; + else + ret &= ~AUO_PIXCIR_INT_ENABLE; + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, + ret); + if (ret < 0) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + return 0; +} + +static int auo_pixcir_start(struct auo_pixcir_ts *ts) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE); + if (ret < 0) { + dev_err(&client->dev, "could not set power mode, %d\n", + ret); + return ret; + } + + ts->stopped = false; + mb(); + enable_irq(client->irq); + + ret = auo_pixcir_int_toggle(ts, 1); + if (ret < 0) { + dev_err(&client->dev, "could not enable interrupt, %d\n", + ret); + disable_irq(client->irq); + return ret; + } + + return 0; +} + +static int auo_pixcir_stop(struct auo_pixcir_ts *ts) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = auo_pixcir_int_toggle(ts, 0); + if (ret < 0) { + dev_err(&client->dev, "could not disable interrupt, %d\n", + ret); + return ret; + } + + /* disable receiving of interrupts */ + disable_irq(client->irq); + ts->stopped = true; + mb(); + wake_up(&ts->wait); + + return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP); +} + +static int auo_pixcir_input_open(struct input_dev *dev) +{ + struct auo_pixcir_ts *ts = input_get_drvdata(dev); + int ret; + + ret = auo_pixcir_start(ts); + if (ret) + return ret; + + return 0; +} + +static void auo_pixcir_input_close(struct input_dev *dev) +{ + struct auo_pixcir_ts *ts = input_get_drvdata(dev); + + auo_pixcir_stop(ts); + + return; +} + +#ifdef CONFIG_PM_SLEEP +static int auo_pixcir_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + /* when configured as wakeup source, device should always wake system + * therefore start device if necessary + */ + if (device_may_wakeup(&client->dev)) { + /* need to start device if not open, to be wakeup source */ + if (!input->users) { + ret = auo_pixcir_start(ts); + if (ret) + goto unlock; + } + + enable_irq_wake(client->irq); + ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP); + } else if (input->users) { + ret = auo_pixcir_stop(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} + +static int auo_pixcir_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(&client->dev)) { + disable_irq_wake(client->irq); + + /* need to stop device if it was not open on suspend */ + if (!input->users) { + ret = auo_pixcir_stop(ts); + if (ret) + goto unlock; + } + + /* device wakes automatically from SLEEP */ + } else if (input->users) { + ret = auo_pixcir_start(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, auo_pixcir_suspend, + auo_pixcir_resume); + +static int __devinit auo_pixcir_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + struct auo_pixcir_ts *ts; + struct input_dev *input_dev; + int ret; + + if (!pdata) + return -EINVAL; + + ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ret = gpio_request(pdata->gpio_int, "auo_pixcir_ts_int"); + if (ret) { + dev_err(&client->dev, "request of gpio %d failed, %d\n", + pdata->gpio_int, ret); + goto err_gpio_int; + } + + if (pdata->init_hw) + pdata->init_hw(client); + + ts->client = client; + ts->touch_ind_mode = 0; + init_waitqueue_head(&ts->wait); + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input0", dev_name(&client->dev)); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&client->dev, "could not allocate input device\n"); + goto err_input_alloc; + } + + ts->input = input_dev; + + input_dev->name = "AUO-Pixcir touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + input_dev->open = auo_pixcir_input_open; + input_dev->close = auo_pixcir_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + + __set_bit(BTN_TOUCH, input_dev->keybit); + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0); + + /* For multi touch */ + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, + pdata->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, + pdata->y_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, + AUO_PIXCIR_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, + AUO_PIXCIR_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION); + if (ret < 0) + goto err_fw_vers; + dev_info(&client->dev, "firmware version 0x%X\n", ret); + + ret = auo_pixcir_int_config(ts, pdata->int_setting); + if (ret) + goto err_fw_vers; + + input_set_drvdata(ts->input, ts); + ts->stopped = true; + + ret = request_threaded_irq(client->irq, NULL, auo_pixcir_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + input_dev->name, ts); + if (ret) { + dev_err(&client->dev, "irq %d requested failed\n", client->irq); + goto err_fw_vers; + } + + /* stop device and put it into deep sleep until it is opened */ + ret = auo_pixcir_stop(ts); + if (ret < 0) + goto err_input_register; + + ret = input_register_device(input_dev); + if (ret) { + dev_err(&client->dev, "could not register input device\n"); + goto err_input_register; + } + + i2c_set_clientdata(client, ts); + + return 0; + +err_input_register: + free_irq(client->irq, ts); +err_fw_vers: + input_free_device(input_dev); +err_input_alloc: + if (pdata->exit_hw) + pdata->exit_hw(client); + gpio_free(pdata->gpio_int); +err_gpio_int: + kfree(ts); + + return ret; +} + +static int __devexit auo_pixcir_remove(struct i2c_client *client) +{ + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + + free_irq(client->irq, ts); + + input_unregister_device(ts->input); + + if (pdata->exit_hw) + pdata->exit_hw(client); + + gpio_free(pdata->gpio_int); + + kfree(ts); + + return 0; +} + +static const struct i2c_device_id auo_pixcir_idtable[] = { + { "auo_pixcir_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable); + +static struct i2c_driver auo_pixcir_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "auo_pixcir_ts", + .pm = &auo_pixcir_pm_ops, + }, + .probe = auo_pixcir_probe, + .remove = __devexit_p(auo_pixcir_remove), + .id_table = auo_pixcir_idtable, +}; + +module_i2c_driver(auo_pixcir_driver); + +MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/bu21013_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/bu21013_ts.c new file mode 100644 index 00000000..f2d03c06 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/bu21013_ts.c @@ -0,0 +1,659 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson + * License terms:GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/input.h> +#include <linux/input/bu21013.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> + +#define PEN_DOWN_INTR 0 +#define MAX_FINGERS 2 +#define RESET_DELAY 30 +#define PENUP_TIMEOUT (10) +#define DELTA_MIN 16 +#define MASK_BITS 0x03 +#define SHIFT_8 8 +#define SHIFT_2 2 +#define LENGTH_OF_BUFFER 11 +#define I2C_RETRY_COUNT 5 + +#define BU21013_SENSORS_BTN_0_7_REG 0x70 +#define BU21013_SENSORS_BTN_8_15_REG 0x71 +#define BU21013_SENSORS_BTN_16_23_REG 0x72 +#define BU21013_X1_POS_MSB_REG 0x73 +#define BU21013_X1_POS_LSB_REG 0x74 +#define BU21013_Y1_POS_MSB_REG 0x75 +#define BU21013_Y1_POS_LSB_REG 0x76 +#define BU21013_X2_POS_MSB_REG 0x77 +#define BU21013_X2_POS_LSB_REG 0x78 +#define BU21013_Y2_POS_MSB_REG 0x79 +#define BU21013_Y2_POS_LSB_REG 0x7A +#define BU21013_INT_CLR_REG 0xE8 +#define BU21013_INT_MODE_REG 0xE9 +#define BU21013_GAIN_REG 0xEA +#define BU21013_OFFSET_MODE_REG 0xEB +#define BU21013_XY_EDGE_REG 0xEC +#define BU21013_RESET_REG 0xED +#define BU21013_CALIB_REG 0xEE +#define BU21013_DONE_REG 0xEF +#define BU21013_SENSOR_0_7_REG 0xF0 +#define BU21013_SENSOR_8_15_REG 0xF1 +#define BU21013_SENSOR_16_23_REG 0xF2 +#define BU21013_POS_MODE1_REG 0xF3 +#define BU21013_POS_MODE2_REG 0xF4 +#define BU21013_CLK_MODE_REG 0xF5 +#define BU21013_IDLE_REG 0xFA +#define BU21013_FILTER_REG 0xFB +#define BU21013_TH_ON_REG 0xFC +#define BU21013_TH_OFF_REG 0xFD + + +#define BU21013_RESET_ENABLE 0x01 + +#define BU21013_SENSORS_EN_0_7 0x3F +#define BU21013_SENSORS_EN_8_15 0xFC +#define BU21013_SENSORS_EN_16_23 0x1F + +#define BU21013_POS_MODE1_0 0x02 +#define BU21013_POS_MODE1_1 0x04 +#define BU21013_POS_MODE1_2 0x08 + +#define BU21013_POS_MODE2_ZERO 0x01 +#define BU21013_POS_MODE2_AVG1 0x02 +#define BU21013_POS_MODE2_AVG2 0x04 +#define BU21013_POS_MODE2_EN_XY 0x08 +#define BU21013_POS_MODE2_EN_RAW 0x10 +#define BU21013_POS_MODE2_MULTI 0x80 + +#define BU21013_CLK_MODE_DIV 0x01 +#define BU21013_CLK_MODE_EXT 0x02 +#define BU21013_CLK_MODE_CALIB 0x80 + +#define BU21013_IDLET_0 0x01 +#define BU21013_IDLET_1 0x02 +#define BU21013_IDLET_2 0x04 +#define BU21013_IDLET_3 0x08 +#define BU21013_IDLE_INTERMIT_EN 0x10 + +#define BU21013_DELTA_0_6 0x7F +#define BU21013_FILTER_EN 0x80 + +#define BU21013_INT_MODE_LEVEL 0x00 +#define BU21013_INT_MODE_EDGE 0x01 + +#define BU21013_GAIN_0 0x01 +#define BU21013_GAIN_1 0x02 +#define BU21013_GAIN_2 0x04 + +#define BU21013_OFFSET_MODE_DEFAULT 0x00 +#define BU21013_OFFSET_MODE_MOVE 0x01 +#define BU21013_OFFSET_MODE_DISABLE 0x02 + +#define BU21013_TH_ON_0 0x01 +#define BU21013_TH_ON_1 0x02 +#define BU21013_TH_ON_2 0x04 +#define BU21013_TH_ON_3 0x08 +#define BU21013_TH_ON_4 0x10 +#define BU21013_TH_ON_5 0x20 +#define BU21013_TH_ON_6 0x40 +#define BU21013_TH_ON_7 0x80 +#define BU21013_TH_ON_MAX 0xFF + +#define BU21013_TH_OFF_0 0x01 +#define BU21013_TH_OFF_1 0x02 +#define BU21013_TH_OFF_2 0x04 +#define BU21013_TH_OFF_3 0x08 +#define BU21013_TH_OFF_4 0x10 +#define BU21013_TH_OFF_5 0x20 +#define BU21013_TH_OFF_6 0x40 +#define BU21013_TH_OFF_7 0x80 +#define BU21013_TH_OFF_MAX 0xFF + +#define BU21013_X_EDGE_0 0x01 +#define BU21013_X_EDGE_1 0x02 +#define BU21013_X_EDGE_2 0x04 +#define BU21013_X_EDGE_3 0x08 +#define BU21013_Y_EDGE_0 0x10 +#define BU21013_Y_EDGE_1 0x20 +#define BU21013_Y_EDGE_2 0x40 +#define BU21013_Y_EDGE_3 0x80 + +#define BU21013_DONE 0x01 +#define BU21013_NUMBER_OF_X_SENSORS (6) +#define BU21013_NUMBER_OF_Y_SENSORS (11) + +#define DRIVER_TP "bu21013_tp" + +/** + * struct bu21013_ts_data - touch panel data structure + * @client: pointer to the i2c client + * @wait: variable to wait_queue_head_t structure + * @touch_stopped: touch stop flag + * @chip: pointer to the touch panel controller + * @in_dev: pointer to the input device structure + * @intr_pin: interrupt pin value + * @regulator: pointer to the Regulator used for touch screen + * + * Touch panel device data structure + */ +struct bu21013_ts_data { + struct i2c_client *client; + wait_queue_head_t wait; + bool touch_stopped; + const struct bu21013_platform_device *chip; + struct input_dev *in_dev; + unsigned int intr_pin; + struct regulator *regulator; +}; + +/** + * bu21013_read_block_data(): read the touch co-ordinates + * @data: bu21013_ts_data structure pointer + * @buf: byte pointer + * + * Read the touch co-ordinates using i2c read block into buffer + * and returns integer. + */ +static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf) +{ + int ret, i; + + for (i = 0; i < I2C_RETRY_COUNT; i++) { + ret = i2c_smbus_read_i2c_block_data + (data->client, BU21013_SENSORS_BTN_0_7_REG, + LENGTH_OF_BUFFER, buf); + if (ret == LENGTH_OF_BUFFER) + return 0; + } + return -EINVAL; +} + +/** + * bu21013_do_touch_report(): Get the touch co-ordinates + * @data: bu21013_ts_data structure pointer + * + * Get the touch co-ordinates from touch sensor registers and writes + * into device structure and returns integer. + */ +static int bu21013_do_touch_report(struct bu21013_ts_data *data) +{ + u8 buf[LENGTH_OF_BUFFER]; + unsigned int pos_x[2], pos_y[2]; + bool has_x_sensors, has_y_sensors; + int finger_down_count = 0; + int i; + + if (data == NULL) + return -EINVAL; + + if (bu21013_read_block_data(data, buf) < 0) + return -EINVAL; + + has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7); + has_y_sensors = hweight32(((buf[1] & BU21013_SENSORS_EN_8_15) | + ((buf[2] & BU21013_SENSORS_EN_16_23) << SHIFT_8)) >> SHIFT_2); + if (!has_x_sensors || !has_y_sensors) + return 0; + + for (i = 0; i < MAX_FINGERS; i++) { + const u8 *p = &buf[4 * i + 3]; + unsigned int x = p[0] << SHIFT_2 | (p[1] & MASK_BITS); + unsigned int y = p[2] << SHIFT_2 | (p[3] & MASK_BITS); + if (x == 0 || y == 0) + continue; + pos_x[finger_down_count] = x; + pos_y[finger_down_count] = y; + finger_down_count++; + } + + if (finger_down_count) { + if (finger_down_count == 2 && + (abs(pos_x[0] - pos_x[1]) < DELTA_MIN || + abs(pos_y[0] - pos_y[1]) < DELTA_MIN)) { + return 0; + } + + for (i = 0; i < finger_down_count; i++) { + if (data->chip->x_flip) + pos_x[i] = data->chip->touch_x_max - pos_x[i]; + if (data->chip->y_flip) + pos_y[i] = data->chip->touch_y_max - pos_y[i]; + + input_report_abs(data->in_dev, + ABS_MT_POSITION_X, pos_x[i]); + input_report_abs(data->in_dev, + ABS_MT_POSITION_Y, pos_y[i]); + input_mt_sync(data->in_dev); + } + } else + input_mt_sync(data->in_dev); + + input_sync(data->in_dev); + + return 0; +} +/** + * bu21013_gpio_irq() - gpio thread function for touch interrupt + * @irq: irq value + * @device_data: void pointer + * + * This gpio thread function for touch interrupt + * and returns irqreturn_t. + */ +static irqreturn_t bu21013_gpio_irq(int irq, void *device_data) +{ + struct bu21013_ts_data *data = device_data; + struct i2c_client *i2c = data->client; + int retval; + + do { + retval = bu21013_do_touch_report(data); + if (retval < 0) { + dev_err(&i2c->dev, "bu21013_do_touch_report failed\n"); + return IRQ_NONE; + } + + data->intr_pin = data->chip->irq_read_val(); + if (data->intr_pin == PEN_DOWN_INTR) + wait_event_timeout(data->wait, data->touch_stopped, + msecs_to_jiffies(2)); + } while (!data->intr_pin && !data->touch_stopped); + + return IRQ_HANDLED; +} + +/** + * bu21013_init_chip() - power on sequence for the bu21013 controller + * @data: device structure pointer + * + * This function is used to power on + * the bu21013 controller and returns integer. + */ +static int bu21013_init_chip(struct bu21013_ts_data *data) +{ + int retval; + struct i2c_client *i2c = data->client; + + retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG, + BU21013_RESET_ENABLE); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_RESET reg write failed\n"); + return retval; + } + msleep(RESET_DELAY); + + retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG, + BU21013_SENSORS_EN_0_7); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG, + BU21013_SENSORS_EN_8_15); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG, + BU21013_SENSORS_EN_16_23); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG, + (BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG, + (BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 | + BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW | + BU21013_POS_MODE2_MULTI)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n"); + return retval; + } + + if (data->chip->ext_clk) + retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG, + (BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB)); + else + retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG, + (BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG, + (BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG, + BU21013_INT_MODE_LEVEL); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG, + (BU21013_DELTA_0_6 | + BU21013_FILTER_EN)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG, + BU21013_TH_ON_5); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG, + BU21013_TH_OFF_4 | BU21013_TH_OFF_3); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG, + (BU21013_GAIN_0 | BU21013_GAIN_1)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG, + BU21013_OFFSET_MODE_DEFAULT); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG, + (BU21013_X_EDGE_0 | BU21013_X_EDGE_2 | + BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG, + BU21013_DONE); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n"); + return retval; + } + + return 0; +} + +/** + * bu21013_free_irq() - frees IRQ registered for touchscreen + * @bu21013_data: device structure pointer + * + * This function signals interrupt thread to stop processing and + * frees interrupt. + */ +static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data) +{ + bu21013_data->touch_stopped = true; + wake_up(&bu21013_data->wait); + free_irq(bu21013_data->chip->irq, bu21013_data); +} + +/** + * bu21013_probe() - initializes the i2c-client touchscreen driver + * @client: i2c client structure pointer + * @id: i2c device id pointer + * + * This function used to initializes the i2c-client touchscreen + * driver and returns integer. + */ +static int __devinit bu21013_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bu21013_ts_data *bu21013_data; + struct input_dev *in_dev; + const struct bu21013_platform_device *pdata = + client->dev.platform_data; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "i2c smbus byte data not supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "platform data not defined\n"); + return -EINVAL; + } + + bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL); + in_dev = input_allocate_device(); + if (!bu21013_data || !in_dev) { + dev_err(&client->dev, "device memory alloc failed\n"); + error = -ENOMEM; + goto err_free_mem; + } + + bu21013_data->in_dev = in_dev; + bu21013_data->chip = pdata; + bu21013_data->client = client; + + bu21013_data->regulator = regulator_get(&client->dev, "V-TOUCH"); + if (IS_ERR(bu21013_data->regulator)) { + dev_err(&client->dev, "regulator_get failed\n"); + error = PTR_ERR(bu21013_data->regulator); + goto err_free_mem; + } + + error = regulator_enable(bu21013_data->regulator); + if (error < 0) { + dev_err(&client->dev, "regulator enable failed\n"); + goto err_put_regulator; + } + + bu21013_data->touch_stopped = false; + init_waitqueue_head(&bu21013_data->wait); + + /* configure the gpio pins */ + if (pdata->cs_en) { + error = pdata->cs_en(pdata->cs_pin); + if (error < 0) { + dev_err(&client->dev, "chip init failed\n"); + goto err_disable_regulator; + } + } + + /* configure the touch panel controller */ + error = bu21013_init_chip(bu21013_data); + if (error) { + dev_err(&client->dev, "error in bu21013 config\n"); + goto err_cs_disable; + } + + /* register the device to input subsystem */ + in_dev->name = DRIVER_TP; + in_dev->id.bustype = BUS_I2C; + in_dev->dev.parent = &client->dev; + + __set_bit(EV_SYN, in_dev->evbit); + __set_bit(EV_KEY, in_dev->evbit); + __set_bit(EV_ABS, in_dev->evbit); + + input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, + pdata->touch_x_max, 0, 0); + input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, + pdata->touch_y_max, 0, 0); + input_set_drvdata(in_dev, bu21013_data); + + error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq, + IRQF_TRIGGER_FALLING | IRQF_SHARED, + DRIVER_TP, bu21013_data); + if (error) { + dev_err(&client->dev, "request irq %d failed\n", pdata->irq); + goto err_cs_disable; + } + + error = input_register_device(in_dev); + if (error) { + dev_err(&client->dev, "failed to register input device\n"); + goto err_free_irq; + } + + device_init_wakeup(&client->dev, pdata->wakeup); + i2c_set_clientdata(client, bu21013_data); + + return 0; + +err_free_irq: + bu21013_free_irq(bu21013_data); +err_cs_disable: + pdata->cs_dis(pdata->cs_pin); +err_disable_regulator: + regulator_disable(bu21013_data->regulator); +err_put_regulator: + regulator_put(bu21013_data->regulator); +err_free_mem: + input_free_device(in_dev); + kfree(bu21013_data); + + return error; +} +/** + * bu21013_remove() - removes the i2c-client touchscreen driver + * @client: i2c client structure pointer + * + * This function uses to remove the i2c-client + * touchscreen driver and returns integer. + */ +static int __devexit bu21013_remove(struct i2c_client *client) +{ + struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client); + + bu21013_free_irq(bu21013_data); + + bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin); + + input_unregister_device(bu21013_data->in_dev); + + regulator_disable(bu21013_data->regulator); + regulator_put(bu21013_data->regulator); + + kfree(bu21013_data); + + device_init_wakeup(&client->dev, false); + + return 0; +} + +#ifdef CONFIG_PM +/** + * bu21013_suspend() - suspend the touch screen controller + * @dev: pointer to device structure + * + * This function is used to suspend the + * touch panel controller and returns integer + */ +static int bu21013_suspend(struct device *dev) +{ + struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev); + struct i2c_client *client = bu21013_data->client; + + bu21013_data->touch_stopped = true; + if (device_may_wakeup(&client->dev)) + enable_irq_wake(bu21013_data->chip->irq); + else + disable_irq(bu21013_data->chip->irq); + + regulator_disable(bu21013_data->regulator); + + return 0; +} + +/** + * bu21013_resume() - resume the touch screen controller + * @dev: pointer to device structure + * + * This function is used to resume the touch panel + * controller and returns integer. + */ +static int bu21013_resume(struct device *dev) +{ + struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev); + struct i2c_client *client = bu21013_data->client; + int retval; + + retval = regulator_enable(bu21013_data->regulator); + if (retval < 0) { + dev_err(&client->dev, "bu21013 regulator enable failed\n"); + return retval; + } + + retval = bu21013_init_chip(bu21013_data); + if (retval < 0) { + dev_err(&client->dev, "bu21013 controller config failed\n"); + return retval; + } + + bu21013_data->touch_stopped = false; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(bu21013_data->chip->irq); + else + enable_irq(bu21013_data->chip->irq); + + return 0; +} + +static const struct dev_pm_ops bu21013_dev_pm_ops = { + .suspend = bu21013_suspend, + .resume = bu21013_resume, +}; +#endif + +static const struct i2c_device_id bu21013_id[] = { + { DRIVER_TP, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bu21013_id); + +static struct i2c_driver bu21013_driver = { + .driver = { + .name = DRIVER_TP, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &bu21013_dev_pm_ops, +#endif + }, + .probe = bu21013_probe, + .remove = __devexit_p(bu21013_remove), + .id_table = bu21013_id, +}; + +module_i2c_driver(bu21013_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>"); +MODULE_DESCRIPTION("bu21013 touch screen controller driver"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/cy8ctmg110_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/cy8ctmg110_ts.c new file mode 100644 index 00000000..237753ad --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -0,0 +1,357 @@ +/* + * Driver for cypress touch screen controller + * + * Copyright (c) 2009 Aava Mobile + * + * Some cleanups by Alan Cox <alan@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/input/cy8ctmg110_pdata.h> + +#define CY8CTMG110_DRIVER_NAME "cy8ctmg110" + +/* Touch coordinates */ +#define CY8CTMG110_X_MIN 0 +#define CY8CTMG110_Y_MIN 0 +#define CY8CTMG110_X_MAX 759 +#define CY8CTMG110_Y_MAX 465 + + +/* cy8ctmg110 register definitions */ +#define CY8CTMG110_TOUCH_WAKEUP_TIME 0 +#define CY8CTMG110_TOUCH_SLEEP_TIME 2 +#define CY8CTMG110_TOUCH_X1 3 +#define CY8CTMG110_TOUCH_Y1 5 +#define CY8CTMG110_TOUCH_X2 7 +#define CY8CTMG110_TOUCH_Y2 9 +#define CY8CTMG110_FINGERS 11 +#define CY8CTMG110_GESTURE 12 +#define CY8CTMG110_REG_MAX 13 + + +/* + * The touch driver structure. + */ +struct cy8ctmg110 { + struct input_dev *input; + char phys[32]; + struct i2c_client *client; + int reset_pin; + int irq_pin; +}; + +/* + * cy8ctmg110_power is the routine that is called when touch hardware + * will powered off or on. + */ +static void cy8ctmg110_power(struct cy8ctmg110 *ts, bool poweron) +{ + if (ts->reset_pin) + gpio_direction_output(ts->reset_pin, 1 - poweron); +} + +static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg, + unsigned char len, unsigned char *value) +{ + struct i2c_client *client = tsc->client; + int ret; + unsigned char i2c_data[6]; + + BUG_ON(len > 5); + + i2c_data[0] = reg; + memcpy(i2c_data + 1, value, len); + + ret = i2c_master_send(client, i2c_data, len + 1); + if (ret != len + 1) { + dev_err(&client->dev, "i2c write data cmd failed\n"); + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc, + unsigned char *data, unsigned char len, unsigned char cmd) +{ + struct i2c_client *client = tsc->client; + int ret; + struct i2c_msg msg[2] = { + /* first write slave position to i2c devices */ + { client->addr, 0, 1, &cmd }, + /* Second read data from position */ + { client->addr, I2C_M_RD, len, data } + }; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) + return ret; + + return 0; +} + +static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc) +{ + struct input_dev *input = tsc->input; + unsigned char reg_p[CY8CTMG110_REG_MAX]; + int x, y; + + memset(reg_p, 0, CY8CTMG110_REG_MAX); + + /* Reading coordinates */ + if (cy8ctmg110_read_regs(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0) + return -EIO; + + y = reg_p[2] << 8 | reg_p[3]; + x = reg_p[0] << 8 | reg_p[1]; + + /* Number of touch */ + if (reg_p[8] == 0) { + input_report_key(input, BTN_TOUCH, 0); + } else { + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } + + input_sync(input); + + return 0; +} + +static int cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts, bool sleep) +{ + unsigned char reg_p[3]; + + if (sleep) { + reg_p[0] = 0x00; + reg_p[1] = 0xff; + reg_p[2] = 5; + } else { + reg_p[0] = 0x10; + reg_p[1] = 0xff; + reg_p[2] = 0; + } + + return cy8ctmg110_write_regs(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p); +} + +static irqreturn_t cy8ctmg110_irq_thread(int irq, void *dev_id) +{ + struct cy8ctmg110 *tsc = dev_id; + + cy8ctmg110_touch_pos(tsc); + + return IRQ_HANDLED; +} + +static int __devinit cy8ctmg110_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct cy8ctmg110_pdata *pdata = client->dev.platform_data; + struct cy8ctmg110 *ts; + struct input_dev *input_dev; + int err; + + /* No pdata no way forward */ + if (pdata == NULL) { + dev_err(&client->dev, "no pdata\n"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -EIO; + + ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + ts->client = client; + ts->input = input_dev; + ts->reset_pin = pdata->reset_pin; + ts->irq_pin = pdata->irq_pin; + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input0", dev_name(&client->dev)); + + input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, + CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 4, 0); + input_set_abs_params(input_dev, ABS_Y, + CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 4, 0); + + if (ts->reset_pin) { + err = gpio_request(ts->reset_pin, NULL); + if (err) { + dev_err(&client->dev, + "Unable to request GPIO pin %d.\n", + ts->reset_pin); + goto err_free_mem; + } + } + + cy8ctmg110_power(ts, true); + cy8ctmg110_set_sleepmode(ts, false); + + err = gpio_request(ts->irq_pin, "touch_irq_key"); + if (err < 0) { + dev_err(&client->dev, + "Failed to request GPIO %d, error %d\n", + ts->irq_pin, err); + goto err_shutoff_device; + } + + err = gpio_direction_input(ts->irq_pin); + if (err < 0) { + dev_err(&client->dev, + "Failed to configure input direction for GPIO %d, error %d\n", + ts->irq_pin, err); + goto err_free_irq_gpio; + } + + client->irq = gpio_to_irq(ts->irq_pin); + if (client->irq < 0) { + err = client->irq; + dev_err(&client->dev, + "Unable to get irq number for GPIO %d, error %d\n", + ts->irq_pin, err); + goto err_free_irq_gpio; + } + + err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread, + IRQF_TRIGGER_RISING, "touch_reset_key", ts); + if (err < 0) { + dev_err(&client->dev, + "irq %d busy? error %d\n", client->irq, err); + goto err_free_irq_gpio; + } + + err = input_register_device(input_dev); + if (err) + goto err_free_irq; + + i2c_set_clientdata(client, ts); + device_init_wakeup(&client->dev, 1); + return 0; + +err_free_irq: + free_irq(client->irq, ts); +err_free_irq_gpio: + gpio_free(ts->irq_pin); +err_shutoff_device: + cy8ctmg110_set_sleepmode(ts, true); + cy8ctmg110_power(ts, false); + if (ts->reset_pin) + gpio_free(ts->reset_pin); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + return err; +} + +#ifdef CONFIG_PM +static int cy8ctmg110_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + else { + cy8ctmg110_set_sleepmode(ts, true); + cy8ctmg110_power(ts, false); + } + return 0; +} + +static int cy8ctmg110_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + else { + cy8ctmg110_power(ts, true); + cy8ctmg110_set_sleepmode(ts, false); + } + return 0; +} + +static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume); +#endif + +static int __devexit cy8ctmg110_remove(struct i2c_client *client) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + cy8ctmg110_set_sleepmode(ts, true); + cy8ctmg110_power(ts, false); + + free_irq(client->irq, ts); + input_unregister_device(ts->input); + gpio_free(ts->irq_pin); + if (ts->reset_pin) + gpio_free(ts->reset_pin); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id cy8ctmg110_idtable[] = { + { CY8CTMG110_DRIVER_NAME, 1 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable); + +static struct i2c_driver cy8ctmg110_driver = { + .driver = { + .owner = THIS_MODULE, + .name = CY8CTMG110_DRIVER_NAME, +#ifdef CONFIG_PM + .pm = &cy8ctmg110_pm, +#endif + }, + .id_table = cy8ctmg110_idtable, + .probe = cy8ctmg110_probe, + .remove = __devexit_p(cy8ctmg110_remove), +}; + +module_i2c_driver(cy8ctmg110_driver); + +MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>"); +MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_core.c b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_core.c new file mode 100644 index 00000000..f030d9ec --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_core.c @@ -0,0 +1,625 @@ +/* + * Core Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +#include "cyttsp_core.h" + +/* Bootloader number of command keys */ +#define CY_NUM_BL_KEYS 8 + +/* helpers */ +#define GET_NUM_TOUCHES(x) ((x) & 0x0F) +#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4) +#define IS_BAD_PKT(x) ((x) & 0x20) +#define IS_VALID_APP(x) ((x) & 0x01) +#define IS_OPERATIONAL_ERR(x) ((x) & 0x3F) +#define GET_HSTMODE(reg) (((reg) & 0x70) >> 4) +#define GET_BOOTLOADERMODE(reg) (((reg) & 0x10) >> 4) + +#define CY_REG_BASE 0x00 +#define CY_REG_ACT_DIST 0x1E +#define CY_REG_ACT_INTRVL 0x1D +#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL + 1) +#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT + 1) +#define CY_MAXZ 255 +#define CY_DELAY_DFLT 20 /* ms */ +#define CY_DELAY_MAX 500 +#define CY_ACT_DIST_DFLT 0xF8 +#define CY_HNDSHK_BIT 0x80 +/* device mode bits */ +#define CY_OPERATE_MODE 0x00 +#define CY_SYSINFO_MODE 0x10 +/* power mode select bits */ +#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */ +#define CY_DEEP_SLEEP_MODE 0x02 +#define CY_LOW_POWER_MODE 0x04 + +/* Slots management */ +#define CY_MAX_FINGER 4 +#define CY_MAX_ID 16 + +static const u8 bl_command[] = { + 0x00, /* file offset */ + 0xFF, /* command */ + 0xA5, /* exit bootloader command */ + 0, 1, 2, 3, 4, 5, 6, 7 /* default keys */ +}; + +static int ttsp_read_block_data(struct cyttsp *ts, u8 command, + u8 length, void *buf) +{ + int error; + int tries; + + for (tries = 0; tries < CY_NUM_RETRY; tries++) { + error = ts->bus_ops->read(ts, command, length, buf); + if (!error) + return 0; + + msleep(CY_DELAY_DFLT); + } + + return -EIO; +} + +static int ttsp_write_block_data(struct cyttsp *ts, u8 command, + u8 length, void *buf) +{ + int error; + int tries; + + for (tries = 0; tries < CY_NUM_RETRY; tries++) { + error = ts->bus_ops->write(ts, command, length, buf); + if (!error) + return 0; + + msleep(CY_DELAY_DFLT); + } + + return -EIO; +} + +static int ttsp_send_command(struct cyttsp *ts, u8 cmd) +{ + return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd); +} + +static int cyttsp_load_bl_regs(struct cyttsp *ts) +{ + memset(&ts->bl_data, 0, sizeof(ts->bl_data)); + ts->bl_data.bl_status = 0x10; + + return ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->bl_data), &ts->bl_data); +} + +static int cyttsp_exit_bl_mode(struct cyttsp *ts) +{ + int error; + u8 bl_cmd[sizeof(bl_command)]; + + memcpy(bl_cmd, bl_command, sizeof(bl_command)); + if (ts->pdata->bl_keys) + memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS], + ts->pdata->bl_keys, sizeof(bl_command)); + + error = ttsp_write_block_data(ts, CY_REG_BASE, + sizeof(bl_cmd), bl_cmd); + if (error) + return error; + + /* wait for TTSP Device to complete the operation */ + msleep(CY_DELAY_DFLT); + + error = cyttsp_load_bl_regs(ts); + if (error) + return error; + + if (GET_BOOTLOADERMODE(ts->bl_data.bl_status)) + return -EIO; + + return 0; +} + +static int cyttsp_set_operational_mode(struct cyttsp *ts) +{ + int error; + + error = ttsp_send_command(ts, CY_OPERATE_MODE); + if (error) + return error; + + /* wait for TTSP Device to complete switch to Operational mode */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->xy_data), &ts->xy_data); + if (error) + return error; + + return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0; +} + +static int cyttsp_set_sysinfo_mode(struct cyttsp *ts) +{ + int error; + + memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data)); + + /* switch to sysinfo mode */ + error = ttsp_send_command(ts, CY_SYSINFO_MODE); + if (error) + return error; + + /* read sysinfo registers */ + msleep(CY_DELAY_DFLT); + error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data), + &ts->sysinfo_data); + if (error) + return error; + + if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl) + return -EIO; + + return 0; +} + +static int cyttsp_set_sysinfo_regs(struct cyttsp *ts) +{ + int retval = 0; + + if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT || + ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT || + ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) { + + u8 intrvl_ray[] = { + ts->pdata->act_intrvl, + ts->pdata->tch_tmout, + ts->pdata->lp_intrvl + }; + + /* set intrvl registers */ + retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL, + sizeof(intrvl_ray), intrvl_ray); + msleep(CY_DELAY_DFLT); + } + + return retval; +} + +static int cyttsp_soft_reset(struct cyttsp *ts) +{ + unsigned long timeout; + int retval; + + /* wait for interrupt to set ready completion */ + INIT_COMPLETION(ts->bl_ready); + ts->state = CY_BL_STATE; + + enable_irq(ts->irq); + + retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE); + if (retval) + goto out; + + timeout = wait_for_completion_timeout(&ts->bl_ready, + msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX)); + retval = timeout ? 0 : -EIO; + +out: + ts->state = CY_IDLE_STATE; + disable_irq(ts->irq); + return retval; +} + +static int cyttsp_act_dist_setup(struct cyttsp *ts) +{ + u8 act_dist_setup = ts->pdata->act_dist; + + /* Init gesture; active distance setup */ + return ttsp_write_block_data(ts, CY_REG_ACT_DIST, + sizeof(act_dist_setup), &act_dist_setup); +} + +static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids) +{ + ids[0] = xy_data->touch12_id >> 4; + ids[1] = xy_data->touch12_id & 0xF; + ids[2] = xy_data->touch34_id >> 4; + ids[3] = xy_data->touch34_id & 0xF; +} + +static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data, + int idx) +{ + switch (idx) { + case 0: + return &xy_data->tch1; + case 1: + return &xy_data->tch2; + case 2: + return &xy_data->tch3; + case 3: + return &xy_data->tch4; + default: + return NULL; + } +} + +static void cyttsp_report_tchdata(struct cyttsp *ts) +{ + struct cyttsp_xydata *xy_data = &ts->xy_data; + struct input_dev *input = ts->input; + int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat); + const struct cyttsp_tch *tch; + int ids[CY_MAX_ID]; + int i; + DECLARE_BITMAP(used, CY_MAX_ID); + + if (IS_LARGE_AREA(xy_data->tt_stat) == 1) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Large area detected\n", __func__); + } else if (num_tch > CY_MAX_FINGER) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__); + } else if (IS_BAD_PKT(xy_data->tt_mode)) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__); + } + + cyttsp_extract_track_ids(xy_data, ids); + + bitmap_zero(used, CY_MAX_ID); + + for (i = 0; i < num_tch; i++) { + tch = cyttsp_get_tch(xy_data, i); + + input_mt_slot(input, ids[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x)); + input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y)); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z); + + __set_bit(ids[i], used); + } + + for (i = 0; i < CY_MAX_ID; i++) { + if (test_bit(i, used)) + continue; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, false); + } + + input_sync(input); +} + +static irqreturn_t cyttsp_irq(int irq, void *handle) +{ + struct cyttsp *ts = handle; + int error; + + if (unlikely(ts->state == CY_BL_STATE)) { + complete(&ts->bl_ready); + goto out; + } + + /* Get touch data from CYTTSP device */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(struct cyttsp_xydata), &ts->xy_data); + if (error) + goto out; + + /* provide flow control handshake */ + if (ts->pdata->use_hndshk) { + error = ttsp_send_command(ts, + ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); + if (error) + goto out; + } + + if (unlikely(ts->state == CY_IDLE_STATE)) + goto out; + + if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) { + /* + * TTSP device has reset back to bootloader mode. + * Restore to operational mode. + */ + error = cyttsp_exit_bl_mode(ts); + if (error) { + dev_err(ts->dev, + "Could not return to operational mode, err: %d\n", + error); + ts->state = CY_IDLE_STATE; + } + } else { + cyttsp_report_tchdata(ts); + } + +out: + return IRQ_HANDLED; +} + +static int cyttsp_power_on(struct cyttsp *ts) +{ + int error; + + error = cyttsp_soft_reset(ts); + if (error) + return error; + + error = cyttsp_load_bl_regs(ts); + if (error) + return error; + + if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) && + IS_VALID_APP(ts->bl_data.bl_status)) { + error = cyttsp_exit_bl_mode(ts); + if (error) + return error; + } + + if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE || + IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) { + return -ENODEV; + } + + error = cyttsp_set_sysinfo_mode(ts); + if (error) + return error; + + error = cyttsp_set_sysinfo_regs(ts); + if (error) + return error; + + error = cyttsp_set_operational_mode(ts); + if (error) + return error; + + /* init active distance */ + error = cyttsp_act_dist_setup(ts); + if (error) + return error; + + ts->state = CY_ACTIVE_STATE; + + return 0; +} + +static int cyttsp_enable(struct cyttsp *ts) +{ + int error; + + /* + * The device firmware can wake on an I2C or SPI memory slave + * address match. So just reading a register is sufficient to + * wake up the device. The first read attempt will fail but it + * will wake it up making the second read attempt successful. + */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->xy_data), &ts->xy_data); + if (error) + return error; + + if (GET_HSTMODE(ts->xy_data.hst_mode)) + return -EIO; + + enable_irq(ts->irq); + + return 0; +} + +static int cyttsp_disable(struct cyttsp *ts) +{ + int error; + + error = ttsp_send_command(ts, CY_LOW_POWER_MODE); + if (error) + return error; + + disable_irq(ts->irq); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cyttsp_suspend(struct device *dev) +{ + struct cyttsp *ts = dev_get_drvdata(dev); + int retval = 0; + + mutex_lock(&ts->input->mutex); + + if (ts->input->users) { + retval = cyttsp_disable(ts); + if (retval == 0) + ts->suspended = true; + } + + mutex_unlock(&ts->input->mutex); + + return retval; +} + +static int cyttsp_resume(struct device *dev) +{ + struct cyttsp *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->input->mutex); + + if (ts->input->users) + cyttsp_enable(ts); + + ts->suspended = false; + + mutex_unlock(&ts->input->mutex); + + return 0; +} + +#endif + +SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume); +EXPORT_SYMBOL_GPL(cyttsp_pm_ops); + +static int cyttsp_open(struct input_dev *dev) +{ + struct cyttsp *ts = input_get_drvdata(dev); + int retval = 0; + + if (!ts->suspended) + retval = cyttsp_enable(ts); + + return retval; +} + +static void cyttsp_close(struct input_dev *dev) +{ + struct cyttsp *ts = input_get_drvdata(dev); + + if (!ts->suspended) + cyttsp_disable(ts); +} + +struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, + struct device *dev, int irq, size_t xfer_buf_size) +{ + const struct cyttsp_platform_data *pdata = dev->platform_data; + struct cyttsp *ts; + struct input_dev *input_dev; + int error; + + if (!pdata || !pdata->name || irq <= 0) { + error = -EINVAL; + goto err_out; + } + + ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + ts->dev = dev; + ts->input = input_dev; + ts->pdata = dev->platform_data; + ts->bus_ops = bus_ops; + ts->irq = irq; + + init_completion(&ts->bl_ready); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); + + if (pdata->init) { + error = pdata->init(); + if (error) { + dev_err(ts->dev, "platform init failed, err: %d\n", + error); + goto err_free_mem; + } + } + + input_dev->name = pdata->name; + input_dev->phys = ts->phys; + input_dev->id.bustype = bus_ops->bustype; + input_dev->dev.parent = ts->dev; + + input_dev->open = cyttsp_open; + input_dev->close = cyttsp_close; + + input_set_drvdata(input_dev, ts); + + __set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, pdata->maxx, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, pdata->maxy, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, CY_MAXZ, 0, 0); + + input_mt_init_slots(input_dev, CY_MAX_ID); + + error = request_threaded_irq(ts->irq, NULL, cyttsp_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdata->name, ts); + if (error) { + dev_err(ts->dev, "failed to request IRQ %d, err: %d\n", + ts->irq, error); + goto err_platform_exit; + } + + disable_irq(ts->irq); + + error = cyttsp_power_on(ts); + if (error) + goto err_free_irq; + + error = input_register_device(input_dev); + if (error) { + dev_err(ts->dev, "failed to register input device: %d\n", + error); + goto err_free_irq; + } + + return ts; + +err_free_irq: + free_irq(ts->irq, ts); +err_platform_exit: + if (pdata->exit) + pdata->exit(); +err_free_mem: + input_free_device(input_dev); + kfree(ts); +err_out: + return ERR_PTR(error); +} +EXPORT_SYMBOL_GPL(cyttsp_probe); + +void cyttsp_remove(struct cyttsp *ts) +{ + free_irq(ts->irq, ts); + input_unregister_device(ts->input); + if (ts->pdata->exit) + ts->pdata->exit(); + kfree(ts); +} +EXPORT_SYMBOL_GPL(cyttsp_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core"); +MODULE_AUTHOR("Cypress"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_core.h b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_core.h new file mode 100644 index 00000000..1aa3c696 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_core.h @@ -0,0 +1,149 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + + +#ifndef __CYTTSP_CORE_H__ +#define __CYTTSP_CORE_H__ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/device.h> +#include <linux/input/cyttsp.h> + +#define CY_NUM_RETRY 16 /* max number of retries for read ops */ + +struct cyttsp_tch { + __be16 x, y; + u8 z; +} __packed; + +/* TrueTouch Standard Product Gen3 interface definition */ +struct cyttsp_xydata { + u8 hst_mode; + u8 tt_mode; + u8 tt_stat; + struct cyttsp_tch tch1; + u8 touch12_id; + struct cyttsp_tch tch2; + u8 gest_cnt; + u8 gest_id; + struct cyttsp_tch tch3; + u8 touch34_id; + struct cyttsp_tch tch4; + u8 tt_undef[3]; + u8 act_dist; + u8 tt_reserved; +} __packed; + + +/* TTSP System Information interface definition */ +struct cyttsp_sysinfo_data { + u8 hst_mode; + u8 mfg_cmd; + u8 mfg_stat; + u8 cid[3]; + u8 tt_undef1; + u8 uid[8]; + u8 bl_verh; + u8 bl_verl; + u8 tts_verh; + u8 tts_verl; + u8 app_idh; + u8 app_idl; + u8 app_verh; + u8 app_verl; + u8 tt_undef[5]; + u8 scn_typ; + u8 act_intrvl; + u8 tch_tmout; + u8 lp_intrvl; +}; + +/* TTSP Bootloader Register Map interface definition */ +#define CY_BL_CHKSUM_OK 0x01 +struct cyttsp_bootloader_data { + u8 bl_file; + u8 bl_status; + u8 bl_error; + u8 blver_hi; + u8 blver_lo; + u8 bld_blver_hi; + u8 bld_blver_lo; + u8 ttspver_hi; + u8 ttspver_lo; + u8 appid_hi; + u8 appid_lo; + u8 appver_hi; + u8 appver_lo; + u8 cid_0; + u8 cid_1; + u8 cid_2; +}; + +struct cyttsp; + +struct cyttsp_bus_ops { + u16 bustype; + int (*write)(struct cyttsp *ts, + u8 addr, u8 length, const void *values); + int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values); +}; + +enum cyttsp_state { + CY_IDLE_STATE, + CY_ACTIVE_STATE, + CY_BL_STATE, +}; + +struct cyttsp { + struct device *dev; + int irq; + struct input_dev *input; + char phys[32]; + const struct cyttsp_platform_data *pdata; + const struct cyttsp_bus_ops *bus_ops; + struct cyttsp_bootloader_data bl_data; + struct cyttsp_sysinfo_data sysinfo_data; + struct cyttsp_xydata xy_data; + struct completion bl_ready; + enum cyttsp_state state; + bool suspended; + + u8 xfer_buf[] ____cacheline_aligned; +}; + +struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, + struct device *dev, int irq, size_t xfer_buf_size); +void cyttsp_remove(struct cyttsp *ts); + +extern const struct dev_pm_ops cyttsp_pm_ops; + +#endif /* __CYTTSP_CORE_H__ */ diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_i2c.c b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_i2c.c new file mode 100644 index 00000000..2af1d0c5 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_i2c.c @@ -0,0 +1,136 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include "cyttsp_core.h" + +#include <linux/i2c.h> +#include <linux/input.h> + +#define CY_I2C_DATA_SIZE 128 + +static int cyttsp_i2c_read_block_data(struct cyttsp *ts, + u8 addr, u8 length, void *values) +{ + struct i2c_client *client = to_i2c_client(ts->dev); + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &addr, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = values, + }, + }; + int retval; + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + +static int cyttsp_i2c_write_block_data(struct cyttsp *ts, + u8 addr, u8 length, const void *values) +{ + struct i2c_client *client = to_i2c_client(ts->dev); + int retval; + + ts->xfer_buf[0] = addr; + memcpy(&ts->xfer_buf[1], values, length); + + retval = i2c_master_send(client, ts->xfer_buf, length + 1); + + return retval < 0 ? retval : 0; +} + +static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = { + .bustype = BUS_I2C, + .write = cyttsp_i2c_write_block_data, + .read = cyttsp_i2c_read_block_data, +}; + +static int __devinit cyttsp_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cyttsp *ts; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C functionality not Supported\n"); + return -EIO; + } + + ts = cyttsp_probe(&cyttsp_i2c_bus_ops, &client->dev, client->irq, + CY_I2C_DATA_SIZE); + + if (IS_ERR(ts)) + return PTR_ERR(ts); + + i2c_set_clientdata(client, ts); + + return 0; +} + +static int __devexit cyttsp_i2c_remove(struct i2c_client *client) +{ + struct cyttsp *ts = i2c_get_clientdata(client); + + cyttsp_remove(ts); + + return 0; +} + +static const struct i2c_device_id cyttsp_i2c_id[] = { + { CY_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id); + +static struct i2c_driver cyttsp_i2c_driver = { + .driver = { + .name = CY_I2C_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp_pm_ops, + }, + .probe = cyttsp_i2c_probe, + .remove = __devexit_p(cyttsp_i2c_remove), + .id_table = cyttsp_i2c_id, +}; + +module_i2c_driver(cyttsp_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("i2c:cyttsp"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_spi.c b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_spi.c new file mode 100644 index 00000000..9f263410 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/cyttsp_spi.c @@ -0,0 +1,200 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include "cyttsp_core.h" + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/spi/spi.h> + +#define CY_SPI_WR_OP 0x00 /* r/~w */ +#define CY_SPI_RD_OP 0x01 +#define CY_SPI_CMD_BYTES 4 +#define CY_SPI_SYNC_BYTE 2 +#define CY_SPI_SYNC_ACK1 0x62 /* from protocol v.2 */ +#define CY_SPI_SYNC_ACK2 0x9D /* from protocol v.2 */ +#define CY_SPI_DATA_SIZE 128 +#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) +#define CY_SPI_BITS_PER_WORD 8 + +static int cyttsp_spi_xfer(struct cyttsp *ts, + u8 op, u8 reg, u8 *buf, int length) +{ + struct spi_device *spi = to_spi_device(ts->dev); + struct spi_message msg; + struct spi_transfer xfer[2]; + u8 *wr_buf = &ts->xfer_buf[0]; + u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE]; + int retval; + int i; + + if (length > CY_SPI_DATA_SIZE) { + dev_err(ts->dev, "%s: length %d is too big.\n", + __func__, length); + return -EINVAL; + } + + memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); + memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE); + + wr_buf[0] = 0x00; /* header byte 0 */ + wr_buf[1] = 0xFF; /* header byte 1 */ + wr_buf[2] = reg; /* reg index */ + wr_buf[3] = op; /* r/~w */ + if (op == CY_SPI_WR_OP) + memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); + + memset(xfer, 0, sizeof(xfer)); + spi_message_init(&msg); + + /* + We set both TX and RX buffers because Cypress TTSP + requires full duplex operation. + */ + xfer[0].tx_buf = wr_buf; + xfer[0].rx_buf = rd_buf; + switch (op) { + case CY_SPI_WR_OP: + xfer[0].len = length + CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + break; + + case CY_SPI_RD_OP: + xfer[0].len = CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + + xfer[1].rx_buf = buf; + xfer[1].len = length; + spi_message_add_tail(&xfer[1], &msg); + break; + + default: + dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op); + return -EINVAL; + } + + retval = spi_sync(spi, &msg); + if (retval < 0) { + dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n", + __func__, retval, xfer[1].len, op); + + /* + * do not return here since was a bad ACK sequence + * let the following ACK check handle any errors and + * allow silent retries + */ + } + + if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 || + rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) { + + dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op); + + for (i = 0; i < CY_SPI_CMD_BYTES; i++) + dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n", + __func__, i, rd_buf[i]); + for (i = 0; i < length; i++) + dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n", + __func__, i, buf[i]); + + return -EIO; + } + + return 0; +} + +static int cyttsp_spi_read_block_data(struct cyttsp *ts, + u8 addr, u8 length, void *data) +{ + return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length); +} + +static int cyttsp_spi_write_block_data(struct cyttsp *ts, + u8 addr, u8 length, const void *data) +{ + return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length); +} + +static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = { + .bustype = BUS_SPI, + .write = cyttsp_spi_write_block_data, + .read = cyttsp_spi_read_block_data, +}; + +static int __devinit cyttsp_spi_probe(struct spi_device *spi) +{ + struct cyttsp *ts; + int error; + + /* Set up SPI*/ + spi->bits_per_word = CY_SPI_BITS_PER_WORD; + spi->mode = SPI_MODE_0; + error = spi_setup(spi); + if (error < 0) { + dev_err(&spi->dev, "%s: SPI setup error %d\n", + __func__, error); + return error; + } + + ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, + CY_SPI_DATA_BUF_SIZE * 2); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + spi_set_drvdata(spi, ts); + + return 0; +} + +static int __devexit cyttsp_spi_remove(struct spi_device *spi) +{ + struct cyttsp *ts = spi_get_drvdata(spi); + + cyttsp_remove(ts); + + return 0; +} + +static struct spi_driver cyttsp_spi_driver = { + .driver = { + .name = CY_SPI_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp_pm_ops, + }, + .probe = cyttsp_spi_probe, + .remove = __devexit_p(cyttsp_spi_remove), +}; + +module_spi_driver(cyttsp_spi_driver); + +MODULE_ALIAS("spi:cyttsp"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("spi:cyttsp"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/da9034-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/da9034-ts.c new file mode 100644 index 00000000..36b65cf1 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/da9034-ts.c @@ -0,0 +1,387 @@ +/* + * Touchscreen driver for Dialog Semiconductor DA9034 + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Fengwei Yin <fengwei.yin@marvell.com> + * Bin Yang <bin.yang@marvell.com> + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/workqueue.h> +#include <linux/mfd/da903x.h> +#include <linux/slab.h> + +#define DA9034_MANUAL_CTRL 0x50 +#define DA9034_LDO_ADC_EN (1 << 4) + +#define DA9034_AUTO_CTRL1 0x51 + +#define DA9034_AUTO_CTRL2 0x52 +#define DA9034_AUTO_TSI_EN (1 << 3) +#define DA9034_PEN_DETECT (1 << 4) + +#define DA9034_TSI_CTRL1 0x53 +#define DA9034_TSI_CTRL2 0x54 +#define DA9034_TSI_X_MSB 0x6c +#define DA9034_TSI_Y_MSB 0x6d +#define DA9034_TSI_XY_LSB 0x6e + +enum { + STATE_IDLE, /* wait for pendown */ + STATE_BUSY, /* TSI busy sampling */ + STATE_STOP, /* sample available */ + STATE_WAIT, /* Wait to start next sample */ +}; + +enum { + EVENT_PEN_DOWN, + EVENT_PEN_UP, + EVENT_TSI_READY, + EVENT_TIMEDOUT, +}; + +struct da9034_touch { + struct device *da9034_dev; + struct input_dev *input_dev; + + struct delayed_work tsi_work; + struct notifier_block notifier; + + int state; + + int interval_ms; + int x_inverted; + int y_inverted; + + int last_x; + int last_y; +}; + +static inline int is_pen_down(struct da9034_touch *touch) +{ + return da903x_query_status(touch->da9034_dev, DA9034_STATUS_PEN_DOWN); +} + +static inline int detect_pen_down(struct da9034_touch *touch, int on) +{ + if (on) + return da903x_set_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_PEN_DETECT); + else + return da903x_clr_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_PEN_DETECT); +} + +static int read_tsi(struct da9034_touch *touch) +{ + uint8_t _x, _y, _v; + int ret; + + ret = da903x_read(touch->da9034_dev, DA9034_TSI_X_MSB, &_x); + if (ret) + return ret; + + ret = da903x_read(touch->da9034_dev, DA9034_TSI_Y_MSB, &_y); + if (ret) + return ret; + + ret = da903x_read(touch->da9034_dev, DA9034_TSI_XY_LSB, &_v); + if (ret) + return ret; + + touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3); + touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2); + + return 0; +} + +static inline int start_tsi(struct da9034_touch *touch) +{ + return da903x_set_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN); +} + +static inline int stop_tsi(struct da9034_touch *touch) +{ + return da903x_clr_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN); +} + +static inline void report_pen_down(struct da9034_touch *touch) +{ + int x = touch->last_x; + int y = touch->last_y; + + x &= 0xfff; + if (touch->x_inverted) + x = 1024 - x; + y &= 0xfff; + if (touch->y_inverted) + y = 1024 - y; + + input_report_abs(touch->input_dev, ABS_X, x); + input_report_abs(touch->input_dev, ABS_Y, y); + input_report_key(touch->input_dev, BTN_TOUCH, 1); + + input_sync(touch->input_dev); +} + +static inline void report_pen_up(struct da9034_touch *touch) +{ + input_report_key(touch->input_dev, BTN_TOUCH, 0); + input_sync(touch->input_dev); +} + +static void da9034_event_handler(struct da9034_touch *touch, int event) +{ + int err; + + switch (touch->state) { + case STATE_IDLE: + if (event != EVENT_PEN_DOWN) + break; + + /* Enable auto measurement of the TSI, this will + * automatically disable pen down detection + */ + err = start_tsi(touch); + if (err) + goto err_reset; + + touch->state = STATE_BUSY; + break; + + case STATE_BUSY: + if (event != EVENT_TSI_READY) + break; + + err = read_tsi(touch); + if (err) + goto err_reset; + + /* Disable auto measurement of the TSI, so that + * pen down status will be available + */ + err = stop_tsi(touch); + if (err) + goto err_reset; + + touch->state = STATE_STOP; + + /* FIXME: PEN_{UP/DOWN} events are expected to be + * available by stopping TSI, but this is found not + * always true, delay and simulate such an event + * here is more reliable + */ + mdelay(1); + da9034_event_handler(touch, + is_pen_down(touch) ? EVENT_PEN_DOWN : + EVENT_PEN_UP); + break; + + case STATE_STOP: + if (event == EVENT_PEN_DOWN) { + report_pen_down(touch); + schedule_delayed_work(&touch->tsi_work, + msecs_to_jiffies(touch->interval_ms)); + touch->state = STATE_WAIT; + } + + if (event == EVENT_PEN_UP) { + report_pen_up(touch); + touch->state = STATE_IDLE; + } + break; + + case STATE_WAIT: + if (event != EVENT_TIMEDOUT) + break; + + if (is_pen_down(touch)) { + start_tsi(touch); + touch->state = STATE_BUSY; + } else { + report_pen_up(touch); + touch->state = STATE_IDLE; + } + break; + } + return; + +err_reset: + touch->state = STATE_IDLE; + stop_tsi(touch); + detect_pen_down(touch, 1); +} + +static void da9034_tsi_work(struct work_struct *work) +{ + struct da9034_touch *touch = + container_of(work, struct da9034_touch, tsi_work.work); + + da9034_event_handler(touch, EVENT_TIMEDOUT); +} + +static int da9034_touch_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct da9034_touch *touch = + container_of(nb, struct da9034_touch, notifier); + + if (event & DA9034_EVENT_TSI_READY) + da9034_event_handler(touch, EVENT_TSI_READY); + + if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE) + da9034_event_handler(touch, EVENT_PEN_DOWN); + + return 0; +} + +static int da9034_touch_open(struct input_dev *dev) +{ + struct da9034_touch *touch = input_get_drvdata(dev); + int ret; + + ret = da903x_register_notifier(touch->da9034_dev, &touch->notifier, + DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY); + if (ret) + return -EBUSY; + + /* Enable ADC LDO */ + ret = da903x_set_bits(touch->da9034_dev, + DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN); + if (ret) + return ret; + + /* TSI_DELAY: 3 slots, TSI_SKIP: 3 slots */ + ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL1, 0x1b); + if (ret) + return ret; + + ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL2, 0x00); + if (ret) + return ret; + + touch->state = STATE_IDLE; + detect_pen_down(touch, 1); + + return 0; +} + +static void da9034_touch_close(struct input_dev *dev) +{ + struct da9034_touch *touch = input_get_drvdata(dev); + + da903x_unregister_notifier(touch->da9034_dev, &touch->notifier, + DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY); + + cancel_delayed_work_sync(&touch->tsi_work); + + touch->state = STATE_IDLE; + stop_tsi(touch); + detect_pen_down(touch, 0); + + /* Disable ADC LDO */ + da903x_clr_bits(touch->da9034_dev, + DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN); +} + + +static int __devinit da9034_touch_probe(struct platform_device *pdev) +{ + struct da9034_touch_pdata *pdata = pdev->dev.platform_data; + struct da9034_touch *touch; + struct input_dev *input_dev; + int ret; + + touch = kzalloc(sizeof(struct da9034_touch), GFP_KERNEL); + if (touch == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + touch->da9034_dev = pdev->dev.parent; + + if (pdata) { + touch->interval_ms = pdata->interval_ms; + touch->x_inverted = pdata->x_inverted; + touch->y_inverted = pdata->y_inverted; + } else + /* fallback into default */ + touch->interval_ms = 10; + + INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work); + touch->notifier.notifier_call = da9034_touch_notifier; + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + ret = -ENOMEM; + goto err_free_touch; + } + + input_dev->name = pdev->name; + input_dev->open = da9034_touch_open; + input_dev->close = da9034_touch_close; + input_dev->dev.parent = &pdev->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + touch->input_dev = input_dev; + input_set_drvdata(input_dev, touch); + + ret = input_register_device(input_dev); + if (ret) + goto err_free_input; + + platform_set_drvdata(pdev, touch); + return 0; + +err_free_input: + input_free_device(input_dev); +err_free_touch: + kfree(touch); + return ret; +} + +static int __devexit da9034_touch_remove(struct platform_device *pdev) +{ + struct da9034_touch *touch = platform_get_drvdata(pdev); + + input_unregister_device(touch->input_dev); + kfree(touch); + + return 0; +} + +static struct platform_driver da9034_touch_driver = { + .driver = { + .name = "da9034-touch", + .owner = THIS_MODULE, + }, + .probe = da9034_touch_probe, + .remove = __devexit_p(da9034_touch_remove), +}; +module_platform_driver(da9034_touch_driver); + +MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9034-touch"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/dynapro.c b/ANDROID_3.4.5/drivers/input/touchscreen/dynapro.c new file mode 100644 index 00000000..45535390 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/dynapro.c @@ -0,0 +1,206 @@ +/* + * Dynapro serial touchscreen driver + * + * Copyright (c) 2009 Tias Guns + * Based on the inexio driver (c) Vojtech Pavlik and Dan Streetman and + * Richard Lemon + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2009/09/19 Tias Guns <tias@ulyssis.org> + * Copied inexio.c and edited for Dynapro protocol (from retired Xorg module) + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Dynapro serial touchscreen driver" + +MODULE_AUTHOR("Tias Guns <tias@ulyssis.org>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define DYNAPRO_FORMAT_TOUCH_BIT 0x40 +#define DYNAPRO_FORMAT_LENGTH 3 +#define DYNAPRO_RESPONSE_BEGIN_BYTE 0x80 + +#define DYNAPRO_MIN_XC 0 +#define DYNAPRO_MAX_XC 0x3ff +#define DYNAPRO_MIN_YC 0 +#define DYNAPRO_MAX_YC 0x3ff + +#define DYNAPRO_GET_XC(data) (data[1] | ((data[0] & 0x38) << 4)) +#define DYNAPRO_GET_YC(data) (data[2] | ((data[0] & 0x07) << 7)) +#define DYNAPRO_GET_TOUCHED(data) (DYNAPRO_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct dynapro { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[DYNAPRO_FORMAT_LENGTH]; + char phys[32]; +}; + +static void dynapro_process_data(struct dynapro *pdynapro) +{ + struct input_dev *dev = pdynapro->dev; + + if (DYNAPRO_FORMAT_LENGTH == ++pdynapro->idx) { + input_report_abs(dev, ABS_X, DYNAPRO_GET_XC(pdynapro->data)); + input_report_abs(dev, ABS_Y, DYNAPRO_GET_YC(pdynapro->data)); + input_report_key(dev, BTN_TOUCH, + DYNAPRO_GET_TOUCHED(pdynapro->data)); + input_sync(dev); + + pdynapro->idx = 0; + } +} + +static irqreturn_t dynapro_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct dynapro *pdynapro = serio_get_drvdata(serio); + + pdynapro->data[pdynapro->idx] = data; + + if (DYNAPRO_RESPONSE_BEGIN_BYTE & pdynapro->data[0]) + dynapro_process_data(pdynapro); + else + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + pdynapro->data[0]); + + return IRQ_HANDLED; +} + +static void dynapro_disconnect(struct serio *serio) +{ + struct dynapro *pdynapro = serio_get_drvdata(serio); + + input_get_device(pdynapro->dev); + input_unregister_device(pdynapro->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(pdynapro->dev); + kfree(pdynapro); +} + +/* + * dynapro_connect() is the routine that is called when someone adds a + * new serio device that supports dynapro protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int dynapro_connect(struct serio *serio, struct serio_driver *drv) +{ + struct dynapro *pdynapro; + struct input_dev *input_dev; + int err; + + pdynapro = kzalloc(sizeof(struct dynapro), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pdynapro || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pdynapro->serio = serio; + pdynapro->dev = input_dev; + snprintf(pdynapro->phys, sizeof(pdynapro->phys), + "%s/input0", serio->phys); + + input_dev->name = "Dynapro Serial TouchScreen"; + input_dev->phys = pdynapro->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_DYNAPRO; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(pdynapro->dev, ABS_X, + DYNAPRO_MIN_XC, DYNAPRO_MAX_XC, 0, 0); + input_set_abs_params(pdynapro->dev, ABS_Y, + DYNAPRO_MIN_YC, DYNAPRO_MAX_YC, 0, 0); + + serio_set_drvdata(serio, pdynapro); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pdynapro->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pdynapro); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id dynapro_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_DYNAPRO, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, dynapro_serio_ids); + +static struct serio_driver dynapro_drv = { + .driver = { + .name = "dynapro", + }, + .description = DRIVER_DESC, + .id_table = dynapro_serio_ids, + .interrupt = dynapro_interrupt, + .connect = dynapro_connect, + .disconnect = dynapro_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init dynapro_init(void) +{ + return serio_register_driver(&dynapro_drv); +} + +static void __exit dynapro_exit(void) +{ + serio_unregister_driver(&dynapro_drv); +} + +module_init(dynapro_init); +module_exit(dynapro_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/eeti_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/eeti_ts.c new file mode 100644 index 00000000..503c7096 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/eeti_ts.c @@ -0,0 +1,327 @@ +/* + * Touch Screen driver for EETI's I2C connected touch screen panels + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * See EETI's software guide for the protocol specification: + * http://home.eeti.com.tw/web20/eg/guide.htm + * + * Based on migor_ts.c + * Copyright (c) 2008 Magnus Damm + * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com> + * + * This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/timer.h> +#include <linux/gpio.h> +#include <linux/input/eeti_ts.h> +#include <linux/slab.h> + +static bool flip_x; +module_param(flip_x, bool, 0644); +MODULE_PARM_DESC(flip_x, "flip x coordinate"); + +static bool flip_y; +module_param(flip_y, bool, 0644); +MODULE_PARM_DESC(flip_y, "flip y coordinate"); + +struct eeti_ts_priv { + struct i2c_client *client; + struct input_dev *input; + struct work_struct work; + struct mutex mutex; + int irq, irq_active_high; +}; + +#define EETI_TS_BITDEPTH (11) +#define EETI_MAXVAL ((1 << (EETI_TS_BITDEPTH + 1)) - 1) + +#define REPORT_BIT_PRESSED (1 << 0) +#define REPORT_BIT_AD0 (1 << 1) +#define REPORT_BIT_AD1 (1 << 2) +#define REPORT_BIT_HAS_PRESSURE (1 << 6) +#define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH) + +static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) +{ + return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high; +} + +static void eeti_ts_read(struct work_struct *work) +{ + char buf[6]; + unsigned int x, y, res, pressed, to = 100; + struct eeti_ts_priv *priv = + container_of(work, struct eeti_ts_priv, work); + + mutex_lock(&priv->mutex); + + while (eeti_ts_irq_active(priv) && --to) + i2c_master_recv(priv->client, buf, sizeof(buf)); + + if (!to) { + dev_err(&priv->client->dev, + "unable to clear IRQ - line stuck?\n"); + goto out; + } + + /* drop non-report packets */ + if (!(buf[0] & 0x80)) + goto out; + + pressed = buf[0] & REPORT_BIT_PRESSED; + res = REPORT_RES_BITS(buf[0] & (REPORT_BIT_AD0 | REPORT_BIT_AD1)); + x = buf[2] | (buf[1] << 8); + y = buf[4] | (buf[3] << 8); + + /* fix the range to 11 bits */ + x >>= res - EETI_TS_BITDEPTH; + y >>= res - EETI_TS_BITDEPTH; + + if (flip_x) + x = EETI_MAXVAL - x; + + if (flip_y) + y = EETI_MAXVAL - y; + + if (buf[0] & REPORT_BIT_HAS_PRESSURE) + input_report_abs(priv->input, ABS_PRESSURE, buf[5]); + + input_report_abs(priv->input, ABS_X, x); + input_report_abs(priv->input, ABS_Y, y); + input_report_key(priv->input, BTN_TOUCH, !!pressed); + input_sync(priv->input); + +out: + mutex_unlock(&priv->mutex); +} + +static irqreturn_t eeti_ts_isr(int irq, void *dev_id) +{ + struct eeti_ts_priv *priv = dev_id; + + /* postpone I2C transactions as we are atomic */ + schedule_work(&priv->work); + + return IRQ_HANDLED; +} + +static void eeti_ts_start(struct eeti_ts_priv *priv) +{ + enable_irq(priv->irq); + + /* Read the events once to arm the IRQ */ + eeti_ts_read(&priv->work); +} + +static void eeti_ts_stop(struct eeti_ts_priv *priv) +{ + disable_irq(priv->irq); + cancel_work_sync(&priv->work); +} + +static int eeti_ts_open(struct input_dev *dev) +{ + struct eeti_ts_priv *priv = input_get_drvdata(dev); + + eeti_ts_start(priv); + + return 0; +} + +static void eeti_ts_close(struct input_dev *dev) +{ + struct eeti_ts_priv *priv = input_get_drvdata(dev); + + eeti_ts_stop(priv); +} + +static int __devinit eeti_ts_probe(struct i2c_client *client, + const struct i2c_device_id *idp) +{ + struct eeti_ts_platform_data *pdata; + struct eeti_ts_priv *priv; + struct input_dev *input; + unsigned int irq_flags; + int err = -ENOMEM; + + /* + * In contrast to what's described in the datasheet, there seems + * to be no way of probing the presence of that device using I2C + * commands. So we need to blindly believe it is there, and wait + * for interrupts to occur. + */ + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&client->dev, "failed to allocate driver data\n"); + goto err0; + } + + mutex_init(&priv->mutex); + input = input_allocate_device(); + + if (!input) { + dev_err(&client->dev, "Failed to allocate input device.\n"); + goto err1; + } + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0); + input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0); + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + input->open = eeti_ts_open; + input->close = eeti_ts_close; + + priv->client = client; + priv->input = input; + priv->irq = client->irq; + + pdata = client->dev.platform_data; + + if (pdata) + priv->irq_active_high = pdata->irq_active_high; + + irq_flags = priv->irq_active_high ? + IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; + + INIT_WORK(&priv->work, eeti_ts_read); + i2c_set_clientdata(client, priv); + input_set_drvdata(input, priv); + + err = input_register_device(input); + if (err) + goto err1; + + err = request_irq(priv->irq, eeti_ts_isr, irq_flags, + client->name, priv); + if (err) { + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); + goto err2; + } + + /* + * Disable the device for now. It will be enabled once the + * input device is opened. + */ + eeti_ts_stop(priv); + + device_init_wakeup(&client->dev, 0); + return 0; + +err2: + input_unregister_device(input); + input = NULL; /* so we dont try to free it below */ +err1: + input_free_device(input); + kfree(priv); +err0: + return err; +} + +static int __devexit eeti_ts_remove(struct i2c_client *client) +{ + struct eeti_ts_priv *priv = i2c_get_clientdata(client); + + free_irq(priv->irq, priv); + /* + * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it + * so that device still works if we reload the driver. + */ + enable_irq(priv->irq); + + input_unregister_device(priv->input); + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM +static int eeti_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_stop(priv); + + mutex_unlock(&input_dev->mutex); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(priv->irq); + + return 0; +} + +static int eeti_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(priv->irq); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_start(priv); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume); +#endif + +static const struct i2c_device_id eeti_ts_id[] = { + { "eeti_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, eeti_ts_id); + +static struct i2c_driver eeti_ts_driver = { + .driver = { + .name = "eeti_ts", +#ifdef CONFIG_PM + .pm = &eeti_ts_pm, +#endif + }, + .probe = eeti_ts_probe, + .remove = __devexit_p(eeti_ts_remove), + .id_table = eeti_ts_id, +}; + +module_i2c_driver(eeti_ts_driver); + +MODULE_DESCRIPTION("EETI Touchscreen driver"); +MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/egalax_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/egalax_ts.c new file mode 100644 index 00000000..70524dd3 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/egalax_ts.c @@ -0,0 +1,292 @@ +/* + * Driver for EETI eGalax Multiple Touch Controller + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * + * based on max11801_ts.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* EETI eGalax serial touch screen controller is a I2C based multiple + * touch screen controller, it supports 5 point multiple touch. */ + +/* TODO: + - auto idle mode support +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/input/mt.h> + +/* + * Mouse Mode: some panel may configure the controller to mouse mode, + * which can only report one point at a given time. + * This driver will ignore events in this mode. + */ +#define REPORT_MODE_MOUSE 0x1 +/* + * Vendor Mode: this mode is used to transfer some vendor specific + * messages. + * This driver will ignore events in this mode. + */ +#define REPORT_MODE_VENDOR 0x3 +/* Multiple Touch Mode */ +#define REPORT_MODE_MTTOUCH 0x4 + +#define MAX_SUPPORT_POINTS 5 + +#define EVENT_VALID_OFFSET 7 +#define EVENT_VALID_MASK (0x1 << EVENT_VALID_OFFSET) +#define EVENT_ID_OFFSET 2 +#define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET) +#define EVENT_IN_RANGE (0x1 << 1) +#define EVENT_DOWN_UP (0X1 << 0) + +#define MAX_I2C_DATA_LEN 10 + +#define EGALAX_MAX_X 32760 +#define EGALAX_MAX_Y 32760 +#define EGALAX_MAX_TRIES 100 + +struct egalax_ts { + struct i2c_client *client; + struct input_dev *input_dev; +}; + +static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) +{ + struct egalax_ts *ts = dev_id; + struct input_dev *input_dev = ts->input_dev; + struct i2c_client *client = ts->client; + u8 buf[MAX_I2C_DATA_LEN]; + int id, ret, x, y, z; + int tries = 0; + bool down, valid; + u8 state; + + do { + ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN); + } while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES); + + if (ret < 0) + return IRQ_HANDLED; + + if (buf[0] != REPORT_MODE_MTTOUCH) { + /* ignore mouse events and vendor events */ + return IRQ_HANDLED; + } + + state = buf[1]; + x = (buf[3] << 8) | buf[2]; + y = (buf[5] << 8) | buf[4]; + z = (buf[7] << 8) | buf[6]; + + valid = state & EVENT_VALID_MASK; + id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET; + down = state & EVENT_DOWN_UP; + + if (!valid || id > MAX_SUPPORT_POINTS) { + dev_dbg(&client->dev, "point invalid\n"); + return IRQ_HANDLED; + } + + input_mt_slot(input_dev, id); + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down); + + dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d", + down ? "down" : "up", id, x, y, z); + + if (down) { + input_report_abs(input_dev, ABS_MT_POSITION_X, x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, y); + input_report_abs(input_dev, ABS_MT_PRESSURE, z); + } + + input_mt_report_pointer_emulation(input_dev, true); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +/* wake up controller by an falling edge of interrupt gpio. */ +static int egalax_wake_up_device(struct i2c_client *client) +{ + int gpio = irq_to_gpio(client->irq); + int ret; + + ret = gpio_request(gpio, "egalax_irq"); + if (ret < 0) { + dev_err(&client->dev, + "request gpio failed, cannot wake up controller: %d\n", + ret); + return ret; + } + + /* wake up controller via an falling edge on IRQ gpio. */ + gpio_direction_output(gpio, 0); + gpio_set_value(gpio, 1); + + /* controller should be waken up, return irq. */ + gpio_direction_input(gpio); + gpio_free(gpio); + + return 0; +} + +static int __devinit egalax_firmware_version(struct i2c_client *client) +{ + static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 }; + int ret; + + ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN); + if (ret < 0) + return ret; + + return 0; +} + +static int __devinit egalax_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct egalax_ts *ts; + struct input_dev *input_dev; + int ret; + int error; + + ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL); + if (!ts) { + dev_err(&client->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_ts; + } + + ts->client = client; + ts->input_dev = input_dev; + + /* controller may be in sleep, wake it up. */ + egalax_wake_up_device(client); + + ret = egalax_firmware_version(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to read firmware version\n"); + error = -EIO; + goto err_free_dev; + } + + input_dev->name = "EETI eGalax Touch Screen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0); + input_set_abs_params(input_dev, + ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); + input_set_abs_params(input_dev, + ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); + input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS); + + input_set_drvdata(input_dev, ts); + + error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "egalax_ts", ts); + if (error < 0) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_dev; + } + + error = input_register_device(ts->input_dev); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, ts); + return 0; + +err_free_irq: + free_irq(client->irq, ts); +err_free_dev: + input_free_device(input_dev); +err_free_ts: + kfree(ts); + + return error; +} + +static __devexit int egalax_ts_remove(struct i2c_client *client) +{ + struct egalax_ts *ts = i2c_get_clientdata(client); + + free_irq(client->irq, ts); + + input_unregister_device(ts->input_dev); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id egalax_ts_id[] = { + { "egalax_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, egalax_ts_id); + +#ifdef CONFIG_PM_SLEEP +static int egalax_ts_suspend(struct device *dev) +{ + static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = { + 0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0 + }; + struct i2c_client *client = to_i2c_client(dev); + int ret; + + ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN); + return ret > 0 ? 0 : ret; +} + +static int egalax_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + return egalax_wake_up_device(client); +} +#endif + +static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); + +static struct i2c_driver egalax_ts_driver = { + .driver = { + .name = "egalax_ts", + .owner = THIS_MODULE, + .pm = &egalax_ts_pm_ops, + }, + .id_table = egalax_ts_id, + .probe = egalax_ts_probe, + .remove = __devexit_p(egalax_ts_remove), +}; + +module_i2c_driver(egalax_ts_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/elo.c b/ANDROID_3.4.5/drivers/input/touchscreen/elo.c new file mode 100644 index 00000000..486d31ba --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/elo.c @@ -0,0 +1,423 @@ +/* + * Elo serial touchscreen driver + * + * Copyright (c) 2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * This driver can handle serial Elo touchscreens using either the Elo standard + * 'E271-2210' 10-byte protocol, Elo legacy 'E281A-4002' 6-byte protocol, Elo + * legacy 'E271-140' 4-byte protocol and Elo legacy 'E261-280' 3-byte protocol. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> +#include <linux/ctype.h> + +#define DRIVER_DESC "Elo serial touchscreen driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define ELO_MAX_LENGTH 10 + +#define ELO10_PACKET_LEN 8 +#define ELO10_TOUCH 0x03 +#define ELO10_PRESSURE 0x80 + +#define ELO10_LEAD_BYTE 'U' + +#define ELO10_ID_CMD 'i' + +#define ELO10_TOUCH_PACKET 'T' +#define ELO10_ACK_PACKET 'A' +#define ELI10_ID_PACKET 'I' + +/* + * Per-touchscreen data. + */ + +struct elo { + struct input_dev *dev; + struct serio *serio; + struct mutex cmd_mutex; + struct completion cmd_done; + int id; + int idx; + unsigned char expected_packet; + unsigned char csum; + unsigned char data[ELO_MAX_LENGTH]; + unsigned char response[ELO10_PACKET_LEN]; + char phys[32]; +}; + +static void elo_process_data_10(struct elo *elo, unsigned char data) +{ + struct input_dev *dev = elo->dev; + + elo->data[elo->idx] = data; + + switch (elo->idx++) { + case 0: + elo->csum = 0xaa; + if (data != ELO10_LEAD_BYTE) { + dev_dbg(&elo->serio->dev, + "unsynchronized data: 0x%02x\n", data); + elo->idx = 0; + } + break; + + case 9: + elo->idx = 0; + if (data != elo->csum) { + dev_dbg(&elo->serio->dev, + "bad checksum: 0x%02x, expected 0x%02x\n", + data, elo->csum); + break; + } + if (elo->data[1] != elo->expected_packet) { + if (elo->data[1] != ELO10_TOUCH_PACKET) + dev_dbg(&elo->serio->dev, + "unexpected packet: 0x%02x\n", + elo->data[1]); + break; + } + if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) { + input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); + input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); + if (elo->data[2] & ELO10_PRESSURE) + input_report_abs(dev, ABS_PRESSURE, + (elo->data[8] << 8) | elo->data[7]); + input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH); + input_sync(dev); + } else if (elo->data[1] == ELO10_ACK_PACKET) { + if (elo->data[2] == '0') + elo->expected_packet = ELO10_TOUCH_PACKET; + complete(&elo->cmd_done); + } else { + memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN); + elo->expected_packet = ELO10_ACK_PACKET; + } + break; + } + elo->csum += data; +} + +static void elo_process_data_6(struct elo *elo, unsigned char data) +{ + struct input_dev *dev = elo->dev; + + elo->data[elo->idx] = data; + + switch (elo->idx++) { + + case 0: + if ((data & 0xc0) != 0xc0) + elo->idx = 0; + break; + + case 1: + if ((data & 0xc0) != 0x80) + elo->idx = 0; + break; + + case 2: + if ((data & 0xc0) != 0x40) + elo->idx = 0; + break; + + case 3: + if (data & 0xc0) { + elo->idx = 0; + break; + } + + input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f)); + input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f)); + + if (elo->id == 2) { + input_report_key(dev, BTN_TOUCH, 1); + input_sync(dev); + elo->idx = 0; + } + + break; + + case 4: + if (data) { + input_sync(dev); + elo->idx = 0; + } + break; + + case 5: + if ((data & 0xf0) == 0) { + input_report_abs(dev, ABS_PRESSURE, elo->data[5]); + input_report_key(dev, BTN_TOUCH, !!elo->data[5]); + } + input_sync(dev); + elo->idx = 0; + break; + } +} + +static void elo_process_data_3(struct elo *elo, unsigned char data) +{ + struct input_dev *dev = elo->dev; + + elo->data[elo->idx] = data; + + switch (elo->idx++) { + + case 0: + if ((data & 0x7f) != 0x01) + elo->idx = 0; + break; + case 2: + input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80)); + input_report_abs(dev, ABS_X, elo->data[1]); + input_report_abs(dev, ABS_Y, elo->data[2]); + input_sync(dev); + elo->idx = 0; + break; + } +} + +static irqreturn_t elo_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct elo *elo = serio_get_drvdata(serio); + + switch (elo->id) { + case 0: + elo_process_data_10(elo, data); + break; + + case 1: + case 2: + elo_process_data_6(elo, data); + break; + + case 3: + elo_process_data_3(elo, data); + break; + } + + return IRQ_HANDLED; +} + +static int elo_command_10(struct elo *elo, unsigned char *packet) +{ + int rc = -1; + int i; + unsigned char csum = 0xaa + ELO10_LEAD_BYTE; + + mutex_lock(&elo->cmd_mutex); + + serio_pause_rx(elo->serio); + elo->expected_packet = toupper(packet[0]); + init_completion(&elo->cmd_done); + serio_continue_rx(elo->serio); + + if (serio_write(elo->serio, ELO10_LEAD_BYTE)) + goto out; + + for (i = 0; i < ELO10_PACKET_LEN; i++) { + csum += packet[i]; + if (serio_write(elo->serio, packet[i])) + goto out; + } + + if (serio_write(elo->serio, csum)) + goto out; + + wait_for_completion_timeout(&elo->cmd_done, HZ); + + if (elo->expected_packet == ELO10_TOUCH_PACKET) { + /* We are back in reporting mode, the command was ACKed */ + memcpy(packet, elo->response, ELO10_PACKET_LEN); + rc = 0; + } + + out: + mutex_unlock(&elo->cmd_mutex); + return rc; +} + +static int elo_setup_10(struct elo *elo) +{ + static const char *elo_types[] = { "Accu", "Dura", "Intelli", "Carroll" }; + struct input_dev *dev = elo->dev; + unsigned char packet[ELO10_PACKET_LEN] = { ELO10_ID_CMD }; + + if (elo_command_10(elo, packet)) + return -1; + + dev->id.version = (packet[5] << 8) | packet[4]; + + input_set_abs_params(dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(dev, ABS_Y, 96, 4000, 0, 0); + if (packet[3] & ELO10_PRESSURE) + input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); + + dev_info(&elo->serio->dev, + "%sTouch touchscreen, fw: %02x.%02x, features: 0x%02x, controller: 0x%02x\n", + elo_types[(packet[1] -'0') & 0x03], + packet[5], packet[4], packet[3], packet[7]); + + return 0; +} + +/* + * elo_disconnect() is the opposite of elo_connect() + */ + +static void elo_disconnect(struct serio *serio) +{ + struct elo *elo = serio_get_drvdata(serio); + + input_get_device(elo->dev); + input_unregister_device(elo->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(elo->dev); + kfree(elo); +} + +/* + * elo_connect() is the routine that is called when someone adds a + * new serio device that supports Gunze protocol and registers it as + * an input device. + */ + +static int elo_connect(struct serio *serio, struct serio_driver *drv) +{ + struct elo *elo; + struct input_dev *input_dev; + int err; + + elo = kzalloc(sizeof(struct elo), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!elo || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + elo->serio = serio; + elo->id = serio->id.id; + elo->dev = input_dev; + elo->expected_packet = ELO10_TOUCH_PACKET; + mutex_init(&elo->cmd_mutex); + init_completion(&elo->cmd_done); + snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys); + + input_dev->name = "Elo Serial TouchScreen"; + input_dev->phys = elo->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_ELO; + input_dev->id.product = elo->id; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + serio_set_drvdata(serio, elo); + err = serio_open(serio, drv); + if (err) + goto fail2; + + switch (elo->id) { + + case 0: /* 10-byte protocol */ + if (elo_setup_10(elo)) + goto fail3; + + break; + + case 1: /* 6-byte protocol */ + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); + + case 2: /* 4-byte protocol */ + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); + break; + + case 3: /* 3-byte protocol */ + input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); + break; + } + + err = input_register_device(elo->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(elo); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id elo_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_ELO, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, elo_serio_ids); + +static struct serio_driver elo_drv = { + .driver = { + .name = "elo", + }, + .description = DRIVER_DESC, + .id_table = elo_serio_ids, + .interrupt = elo_interrupt, + .connect = elo_connect, + .disconnect = elo_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init elo_init(void) +{ + return serio_register_driver(&elo_drv); +} + +static void __exit elo_exit(void) +{ + serio_unregister_driver(&elo_drv); +} + +module_init(elo_init); +module_exit(elo_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/fujitsu_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/fujitsu_ts.c new file mode 100644 index 00000000..80b21800 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/fujitsu_ts.c @@ -0,0 +1,189 @@ +/* + * Fujitsu serial touchscreen driver + * + * Copyright (c) Dmitry Torokhov <dtor@mail.ru> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Fujitsu serial touchscreen driver" + +MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define FUJITSU_LENGTH 5 + +/* + * Per-touchscreen data. + */ +struct fujitsu { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[FUJITSU_LENGTH]; + char phys[32]; +}; + +/* + * Decode serial data (5 bytes per packet) + * First byte + * 1 C 0 0 R S S S + * Where C is 1 while in calibration mode (which we don't use) + * R is 1 when no coordinate corection was done. + * S are button state + */ +static irqreturn_t fujitsu_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct fujitsu *fujitsu = serio_get_drvdata(serio); + struct input_dev *dev = fujitsu->dev; + + if (fujitsu->idx == 0) { + /* resync skip until start of frame */ + if ((data & 0xf0) != 0x80) + return IRQ_HANDLED; + } else { + /* resync skip garbage */ + if (data & 0x80) { + fujitsu->idx = 0; + return IRQ_HANDLED; + } + } + + fujitsu->data[fujitsu->idx++] = data; + if (fujitsu->idx == FUJITSU_LENGTH) { + input_report_abs(dev, ABS_X, + (fujitsu->data[2] << 7) | fujitsu->data[1]); + input_report_abs(dev, ABS_Y, + (fujitsu->data[4] << 7) | fujitsu->data[3]); + input_report_key(dev, BTN_TOUCH, + (fujitsu->data[0] & 0x03) != 2); + input_sync(dev); + fujitsu->idx = 0; + } + + return IRQ_HANDLED; +} + +/* + * fujitsu_disconnect() is the opposite of fujitsu_connect() + */ +static void fujitsu_disconnect(struct serio *serio) +{ + struct fujitsu *fujitsu = serio_get_drvdata(serio); + + input_get_device(fujitsu->dev); + input_unregister_device(fujitsu->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(fujitsu->dev); + kfree(fujitsu); +} + +/* + * fujitsu_connect() is the routine that is called when someone adds a + * new serio device that supports the Fujitsu protocol and registers it + * as input device. + */ +static int fujitsu_connect(struct serio *serio, struct serio_driver *drv) +{ + struct fujitsu *fujitsu; + struct input_dev *input_dev; + int err; + + fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!fujitsu || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + fujitsu->serio = serio; + fujitsu->dev = input_dev; + snprintf(fujitsu->phys, sizeof(fujitsu->phys), + "%s/input0", serio->phys); + + input_dev->name = "Fujitsu Serial Touchscreen"; + input_dev->phys = fujitsu->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_FUJITSU; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0); + serio_set_drvdata(serio, fujitsu); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(fujitsu->dev); + if (err) + goto fail3; + + return 0; + + fail3: + serio_close(serio); + fail2: + serio_set_drvdata(serio, NULL); + fail1: + input_free_device(input_dev); + kfree(fujitsu); + return err; +} + +/* + * The serio driver structure. + */ +static struct serio_device_id fujitsu_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_FUJITSU, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids); + +static struct serio_driver fujitsu_drv = { + .driver = { + .name = "fujitsu_ts", + }, + .description = DRIVER_DESC, + .id_table = fujitsu_serio_ids, + .interrupt = fujitsu_interrupt, + .connect = fujitsu_connect, + .disconnect = fujitsu_disconnect, +}; + +static int __init fujitsu_init(void) +{ + return serio_register_driver(&fujitsu_drv); +} + +static void __exit fujitsu_exit(void) +{ + serio_unregister_driver(&fujitsu_drv); +} + +module_init(fujitsu_init); +module_exit(fujitsu_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/gunze.c b/ANDROID_3.4.5/drivers/input/touchscreen/gunze.c new file mode 100644 index 00000000..a54f90e0 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/gunze.c @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2000-2001 Vojtech Pavlik + */ + +/* + * Gunze AHL-51S touchscreen driver for Linux + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Gunze AHL-51S touchscreen driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define GUNZE_MAX_LENGTH 10 + +/* + * Per-touchscreen data. + */ + +struct gunze { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[GUNZE_MAX_LENGTH]; + char phys[32]; +}; + +static void gunze_process_packet(struct gunze* gunze) +{ + struct input_dev *dev = gunze->dev; + + if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || + (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { + printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data); + return; + } + + input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10)); + input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10)); + input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T'); + input_sync(dev); +} + +static irqreturn_t gunze_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct gunze* gunze = serio_get_drvdata(serio); + + if (data == '\r') { + gunze_process_packet(gunze); + gunze->idx = 0; + } else { + if (gunze->idx < GUNZE_MAX_LENGTH) + gunze->data[gunze->idx++] = data; + } + return IRQ_HANDLED; +} + +/* + * gunze_disconnect() is the opposite of gunze_connect() + */ + +static void gunze_disconnect(struct serio *serio) +{ + struct gunze *gunze = serio_get_drvdata(serio); + + input_get_device(gunze->dev); + input_unregister_device(gunze->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(gunze->dev); + kfree(gunze); +} + +/* + * gunze_connect() is the routine that is called when someone adds a + * new serio device that supports Gunze protocol and registers it as + * an input device. + */ + +static int gunze_connect(struct serio *serio, struct serio_driver *drv) +{ + struct gunze *gunze; + struct input_dev *input_dev; + int err; + + gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gunze || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + gunze->serio = serio; + gunze->dev = input_dev; + snprintf(gunze->phys, sizeof(serio->phys), "%s/input0", serio->phys); + + input_dev->name = "Gunze AHL-51S TouchScreen"; + input_dev->phys = gunze->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_GUNZE; + input_dev->id.product = 0x0051; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0); + + serio_set_drvdata(serio, gunze); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(gunze->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(gunze); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id gunze_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_GUNZE, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, gunze_serio_ids); + +static struct serio_driver gunze_drv = { + .driver = { + .name = "gunze", + }, + .description = DRIVER_DESC, + .id_table = gunze_serio_ids, + .interrupt = gunze_interrupt, + .connect = gunze_connect, + .disconnect = gunze_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init gunze_init(void) +{ + return serio_register_driver(&gunze_drv); +} + +static void __exit gunze_exit(void) +{ + serio_unregister_driver(&gunze_drv); +} + +module_init(gunze_init); +module_exit(gunze_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/h3600_ts_input.c b/ANDROID_3.4.5/drivers/input/touchscreen/h3600_ts_input.c new file mode 100644 index 00000000..6107e563 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/h3600_ts_input.c @@ -0,0 +1,494 @@ +/* + * Copyright (c) 2001 "Crazy" James Simmons jsimmons@transvirtual.com + * + * Sponsored by Transvirtual Technology. + * + * Derived from the code in h3600_ts.[ch] by Charles Flynn + */ + +/* + * Driver for the h3600 Touch Screen and other Atmel controlled devices. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so by + * e-mail - mail your message to <jsimmons@transvirtual.com>. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> +#include <linux/delay.h> + +/* SA1100 serial defines */ +#include <mach/hardware.h> +#include <mach/irqs.h> + +#define DRIVER_DESC "H3600 touchscreen driver" + +MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +/* The start and end of frame characters SOF and EOF */ +#define CHAR_SOF 0x02 +#define CHAR_EOF 0x03 +#define FRAME_OVERHEAD 3 /* CHAR_SOF,CHAR_EOF,LENGTH = 3 */ + +/* + Atmel events and response IDs contained in frame. + Programmer has no control over these numbers. + TODO there are holes - specifically 1,7,0x0a +*/ +#define VERSION_ID 0 /* Get Version (request/response) */ +#define KEYBD_ID 2 /* Keyboard (event) */ +#define TOUCHS_ID 3 /* Touch Screen (event)*/ +#define EEPROM_READ_ID 4 /* (request/response) */ +#define EEPROM_WRITE_ID 5 /* (request/response) */ +#define THERMAL_ID 6 /* (request/response) */ +#define NOTIFY_LED_ID 8 /* (request/response) */ +#define BATTERY_ID 9 /* (request/response) */ +#define SPI_READ_ID 0x0b /* ( request/response) */ +#define SPI_WRITE_ID 0x0c /* ( request/response) */ +#define FLITE_ID 0x0d /* backlight ( request/response) */ +#define STX_ID 0xa1 /* extension pack status (req/resp) */ + +#define MAX_ID 14 + +#define H3600_MAX_LENGTH 16 +#define H3600_KEY 0xf + +#define H3600_SCANCODE_RECORD 1 /* 1 -> record button */ +#define H3600_SCANCODE_CALENDAR 2 /* 2 -> calendar */ +#define H3600_SCANCODE_CONTACTS 3 /* 3 -> contact */ +#define H3600_SCANCODE_Q 4 /* 4 -> Q button */ +#define H3600_SCANCODE_START 5 /* 5 -> start menu */ +#define H3600_SCANCODE_UP 6 /* 6 -> up */ +#define H3600_SCANCODE_RIGHT 7 /* 7 -> right */ +#define H3600_SCANCODE_LEFT 8 /* 8 -> left */ +#define H3600_SCANCODE_DOWN 9 /* 9 -> down */ + +/* + * Per-touchscreen data. + */ +struct h3600_dev { + struct input_dev *dev; + struct serio *serio; + unsigned char event; /* event ID from packet */ + unsigned char chksum; + unsigned char len; + unsigned char idx; + unsigned char buf[H3600_MAX_LENGTH]; + char phys[32]; +}; + +static irqreturn_t action_button_handler(int irq, void *dev_id) +{ + int down = (GPLR & GPIO_BITSY_ACTION_BUTTON) ? 0 : 1; + struct input_dev *dev = dev_id; + + input_report_key(dev, KEY_ENTER, down); + input_sync(dev); + + return IRQ_HANDLED; +} + +static irqreturn_t npower_button_handler(int irq, void *dev_id) +{ + int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1; + struct input_dev *dev = dev_id; + + /* + * This interrupt is only called when we release the key. So we have + * to fake a key press. + */ + input_report_key(dev, KEY_SUSPEND, 1); + input_report_key(dev, KEY_SUSPEND, down); + input_sync(dev); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_PM + +static int flite_brightness = 25; + +enum flite_pwr { + FLITE_PWR_OFF = 0, + FLITE_PWR_ON = 1 +}; + +/* + * h3600_flite_power: enables or disables power to frontlight, using last bright */ +unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr) +{ + unsigned char brightness = (pwr == FLITE_PWR_OFF) ? 0 : flite_brightness; + struct h3600_dev *ts = input_get_drvdata(dev); + + /* Must be in this order */ + serio_write(ts->serio, 1); + serio_write(ts->serio, pwr); + serio_write(ts->serio, brightness); + + return 0; +} + +#endif + +/* + * This function translates the native event packets to linux input event + * packets. Some packets coming from serial are not touchscreen related. In + * this case we send them off to be processed elsewhere. + */ +static void h3600ts_process_packet(struct h3600_dev *ts) +{ + struct input_dev *dev = ts->dev; + static int touched = 0; + int key, down = 0; + + switch (ts->event) { + /* + Buttons - returned as a single byte + 7 6 5 4 3 2 1 0 + S x x x N N N N + + S switch state ( 0=pressed 1=released) + x Unused. + NNNN switch number 0-15 + + Note: This is true for non interrupt generated key events. + */ + case KEYBD_ID: + down = (ts->buf[0] & 0x80) ? 0 : 1; + + switch (ts->buf[0] & 0x7f) { + case H3600_SCANCODE_RECORD: + key = KEY_RECORD; + break; + case H3600_SCANCODE_CALENDAR: + key = KEY_PROG1; + break; + case H3600_SCANCODE_CONTACTS: + key = KEY_PROG2; + break; + case H3600_SCANCODE_Q: + key = KEY_Q; + break; + case H3600_SCANCODE_START: + key = KEY_PROG3; + break; + case H3600_SCANCODE_UP: + key = KEY_UP; + break; + case H3600_SCANCODE_RIGHT: + key = KEY_RIGHT; + break; + case H3600_SCANCODE_LEFT: + key = KEY_LEFT; + break; + case H3600_SCANCODE_DOWN: + key = KEY_DOWN; + break; + default: + key = 0; + } + if (key) + input_report_key(dev, key, down); + break; + /* + * Native touchscreen event data is formatted as shown below:- + * + * +-------+-------+-------+-------+ + * | Xmsb | Xlsb | Ymsb | Ylsb | + * +-------+-------+-------+-------+ + * byte 0 1 2 3 + */ + case TOUCHS_ID: + if (!touched) { + input_report_key(dev, BTN_TOUCH, 1); + touched = 1; + } + + if (ts->len) { + unsigned short x, y; + + x = ts->buf[0]; x <<= 8; x += ts->buf[1]; + y = ts->buf[2]; y <<= 8; y += ts->buf[3]; + + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } else { + input_report_key(dev, BTN_TOUCH, 0); + touched = 0; + } + break; + default: + /* Send a non input event elsewhere */ + break; + } + + input_sync(dev); +} + +/* + * h3600ts_event() handles events from the input module. + */ +static int h3600ts_event(struct input_dev *dev, unsigned int type, + unsigned int code, int value) +{ +#if 0 + struct h3600_dev *ts = input_get_drvdata(dev); + + switch (type) { + case EV_LED: { + // serio_write(ts->serio, SOME_CMD); + return 0; + } + } + return -1; +#endif + return 0; +} + +/* + Frame format + byte 1 2 3 len + 4 + +-------+---------------+---------------+--=------------+ + |SOF |id |len | len bytes | Chksum | + +-------+---------------+---------------+--=------------+ + bit 0 7 8 11 12 15 16 + + +-------+---------------+-------+ + |SOF |id |0 |Chksum | - Note Chksum does not include SOF + +-------+---------------+-------+ + bit 0 7 8 11 12 15 16 + +*/ + +static int state; + +/* decode States */ +#define STATE_SOF 0 /* start of FRAME */ +#define STATE_ID 1 /* state where we decode the ID & len */ +#define STATE_DATA 2 /* state where we decode data */ +#define STATE_EOF 3 /* state where we decode checksum or EOF */ + +static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct h3600_dev *ts = serio_get_drvdata(serio); + + /* + * We have a new frame coming in. + */ + switch (state) { + case STATE_SOF: + if (data == CHAR_SOF) + state = STATE_ID; + break; + case STATE_ID: + ts->event = (data & 0xf0) >> 4; + ts->len = (data & 0xf); + ts->idx = 0; + if (ts->event >= MAX_ID) { + state = STATE_SOF; + break; + } + ts->chksum = data; + state = (ts->len > 0) ? STATE_DATA : STATE_EOF; + break; + case STATE_DATA: + ts->chksum += data; + ts->buf[ts->idx]= data; + if (++ts->idx == ts->len) + state = STATE_EOF; + break; + case STATE_EOF: + state = STATE_SOF; + if (data == CHAR_EOF || data == ts->chksum) + h3600ts_process_packet(ts); + break; + default: + printk("Error3\n"); + break; + } + + return IRQ_HANDLED; +} + +/* + * h3600ts_connect() is the routine that is called when someone adds a + * new serio device that supports H3600 protocol and registers it as + * an input device. + */ +static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) +{ + struct h3600_dev *ts; + struct input_dev *input_dev; + int err; + + ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + ts->serio = serio; + ts->dev = input_dev; + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", serio->phys); + + input_dev->name = "H3600 TouchScreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_H3600; + input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */ + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_set_drvdata(input_dev, ts); + + input_dev->event = h3600ts_event; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | + BIT_MASK(EV_LED) | BIT_MASK(EV_PWR); + input_dev->ledbit[0] = BIT_MASK(LED_SLEEP); + input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0); + + set_bit(KEY_RECORD, input_dev->keybit); + set_bit(KEY_Q, input_dev->keybit); + set_bit(KEY_PROG1, input_dev->keybit); + set_bit(KEY_PROG2, input_dev->keybit); + set_bit(KEY_PROG3, input_dev->keybit); + set_bit(KEY_UP, input_dev->keybit); + set_bit(KEY_RIGHT, input_dev->keybit); + set_bit(KEY_LEFT, input_dev->keybit); + set_bit(KEY_DOWN, input_dev->keybit); + set_bit(KEY_ENTER, input_dev->keybit); + set_bit(KEY_SUSPEND, input_dev->keybit); + set_bit(BTN_TOUCH, input_dev->keybit); + + /* Device specific stuff */ + set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES); + set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE); + + if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler, + IRQF_SHARED, "h3600_action", ts->dev)) { + printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); + err = -EBUSY; + goto fail1; + } + + if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, + IRQF_SHARED, "h3600_suspend", ts->dev)) { + printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); + err = -EBUSY; + goto fail2; + } + + serio_set_drvdata(serio, ts); + + err = serio_open(serio, drv); + if (err) + goto fail3; + + //h3600_flite_control(1, 25); /* default brightness */ + err = input_register_device(ts->dev); + if (err) + goto fail4; + + return 0; + +fail4: serio_close(serio); +fail3: serio_set_drvdata(serio, NULL); + free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); +fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev); +fail1: input_free_device(input_dev); + kfree(ts); + return err; +} + +/* + * h3600ts_disconnect() is the opposite of h3600ts_connect() + */ + +static void h3600ts_disconnect(struct serio *serio) +{ + struct h3600_dev *ts = serio_get_drvdata(serio); + + free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev); + free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); + input_get_device(ts->dev); + input_unregister_device(ts->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(ts->dev); + kfree(ts); +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id h3600ts_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_H3600, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, h3600ts_serio_ids); + +static struct serio_driver h3600ts_drv = { + .driver = { + .name = "h3600ts", + }, + .description = DRIVER_DESC, + .id_table = h3600ts_serio_ids, + .interrupt = h3600ts_interrupt, + .connect = h3600ts_connect, + .disconnect = h3600ts_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init h3600ts_init(void) +{ + return serio_register_driver(&h3600ts_drv); +} + +static void __exit h3600ts_exit(void) +{ + serio_unregister_driver(&h3600ts_drv); +} + +module_init(h3600ts_init); +module_exit(h3600ts_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/hampshire.c b/ANDROID_3.4.5/drivers/input/touchscreen/hampshire.c new file mode 100644 index 00000000..2da6cc31 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/hampshire.c @@ -0,0 +1,205 @@ +/* + * Hampshire serial touchscreen driver + * + * Copyright (c) 2010 Adam Bennett + * Based on the dynapro driver (c) Tias Guns + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2010/04/08 Adam Bennett <abennett72@gmail.com> + * Copied dynapro.c and edited for Hampshire 4-byte protocol + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Hampshire serial touchscreen driver" + +MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40 +#define HAMPSHIRE_FORMAT_LENGTH 4 +#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80 + +#define HAMPSHIRE_MIN_XC 0 +#define HAMPSHIRE_MAX_XC 0x1000 +#define HAMPSHIRE_MIN_YC 0 +#define HAMPSHIRE_MAX_YC 0x1000 + +#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6)) +#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9)) +#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct hampshire { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[HAMPSHIRE_FORMAT_LENGTH]; + char phys[32]; +}; + +static void hampshire_process_data(struct hampshire *phampshire) +{ + struct input_dev *dev = phampshire->dev; + + if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) { + input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data)); + input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data)); + input_report_key(dev, BTN_TOUCH, + HAMPSHIRE_GET_TOUCHED(phampshire->data)); + input_sync(dev); + + phampshire->idx = 0; + } +} + +static irqreturn_t hampshire_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct hampshire *phampshire = serio_get_drvdata(serio); + + phampshire->data[phampshire->idx] = data; + + if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0]) + hampshire_process_data(phampshire); + else + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + phampshire->data[0]); + + return IRQ_HANDLED; +} + +static void hampshire_disconnect(struct serio *serio) +{ + struct hampshire *phampshire = serio_get_drvdata(serio); + + input_get_device(phampshire->dev); + input_unregister_device(phampshire->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(phampshire->dev); + kfree(phampshire); +} + +/* + * hampshire_connect() is the routine that is called when someone adds a + * new serio device that supports hampshire protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int hampshire_connect(struct serio *serio, struct serio_driver *drv) +{ + struct hampshire *phampshire; + struct input_dev *input_dev; + int err; + + phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!phampshire || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + phampshire->serio = serio; + phampshire->dev = input_dev; + snprintf(phampshire->phys, sizeof(phampshire->phys), + "%s/input0", serio->phys); + + input_dev->name = "Hampshire Serial TouchScreen"; + input_dev->phys = phampshire->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_HAMPSHIRE; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(phampshire->dev, ABS_X, + HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0); + input_set_abs_params(phampshire->dev, ABS_Y, + HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0); + + serio_set_drvdata(serio, phampshire); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(phampshire->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(phampshire); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id hampshire_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_HAMPSHIRE, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, hampshire_serio_ids); + +static struct serio_driver hampshire_drv = { + .driver = { + .name = "hampshire", + }, + .description = DRIVER_DESC, + .id_table = hampshire_serio_ids, + .interrupt = hampshire_interrupt, + .connect = hampshire_connect, + .disconnect = hampshire_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init hampshire_init(void) +{ + return serio_register_driver(&hampshire_drv); +} + +static void __exit hampshire_exit(void) +{ + serio_unregister_driver(&hampshire_drv); +} + +module_init(hampshire_init); +module_exit(hampshire_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/hp680_ts_input.c b/ANDROID_3.4.5/drivers/input/touchscreen/hp680_ts_input.c new file mode 100644 index 00000000..85cf9bee --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/hp680_ts_input.c @@ -0,0 +1,127 @@ +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/adc.h> +#include <mach/hp6xx.h> + +#define MODNAME "hp680_ts_input" + +#define HP680_TS_ABS_X_MIN 40 +#define HP680_TS_ABS_X_MAX 950 +#define HP680_TS_ABS_Y_MIN 80 +#define HP680_TS_ABS_Y_MAX 910 + +#define PHDR 0xa400012e +#define SCPDR 0xa4000136 + +static void do_softint(struct work_struct *work); + +static struct input_dev *hp680_ts_dev; +static DECLARE_DELAYED_WORK(work, do_softint); + +static void do_softint(struct work_struct *work) +{ + int absx = 0, absy = 0; + u8 scpdr; + int touched = 0; + + if (__raw_readb(PHDR) & PHDR_TS_PEN_DOWN) { + scpdr = __raw_readb(SCPDR); + scpdr |= SCPDR_TS_SCAN_ENABLE; + scpdr &= ~SCPDR_TS_SCAN_Y; + __raw_writeb(scpdr, SCPDR); + udelay(30); + + absy = adc_single(ADC_CHANNEL_TS_Y); + + scpdr = __raw_readb(SCPDR); + scpdr |= SCPDR_TS_SCAN_Y; + scpdr &= ~SCPDR_TS_SCAN_X; + __raw_writeb(scpdr, SCPDR); + udelay(30); + + absx = adc_single(ADC_CHANNEL_TS_X); + + scpdr = __raw_readb(SCPDR); + scpdr |= SCPDR_TS_SCAN_X; + scpdr &= ~SCPDR_TS_SCAN_ENABLE; + __raw_writeb(scpdr, SCPDR); + udelay(100); + touched = __raw_readb(PHDR) & PHDR_TS_PEN_DOWN; + } + + if (touched) { + input_report_key(hp680_ts_dev, BTN_TOUCH, 1); + input_report_abs(hp680_ts_dev, ABS_X, absx); + input_report_abs(hp680_ts_dev, ABS_Y, absy); + } else { + input_report_key(hp680_ts_dev, BTN_TOUCH, 0); + } + + input_sync(hp680_ts_dev); + enable_irq(HP680_TS_IRQ); +} + +static irqreturn_t hp680_ts_interrupt(int irq, void *dev) +{ + disable_irq_nosync(irq); + schedule_delayed_work(&work, HZ / 20); + + return IRQ_HANDLED; +} + +static int __init hp680_ts_init(void) +{ + int err; + + hp680_ts_dev = input_allocate_device(); + if (!hp680_ts_dev) + return -ENOMEM; + + hp680_ts_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); + hp680_ts_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(hp680_ts_dev, ABS_X, + HP680_TS_ABS_X_MIN, HP680_TS_ABS_X_MAX, 0, 0); + input_set_abs_params(hp680_ts_dev, ABS_Y, + HP680_TS_ABS_Y_MIN, HP680_TS_ABS_Y_MAX, 0, 0); + + hp680_ts_dev->name = "HP Jornada touchscreen"; + hp680_ts_dev->phys = "hp680_ts/input0"; + + if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, + 0, MODNAME, NULL) < 0) { + printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", + HP680_TS_IRQ); + err = -EBUSY; + goto fail1; + } + + err = input_register_device(hp680_ts_dev); + if (err) + goto fail2; + + return 0; + + fail2: free_irq(HP680_TS_IRQ, NULL); + cancel_delayed_work_sync(&work); + fail1: input_free_device(hp680_ts_dev); + return err; +} + +static void __exit hp680_ts_exit(void) +{ + free_irq(HP680_TS_IRQ, NULL); + cancel_delayed_work_sync(&work); + input_unregister_device(hp680_ts_dev); +} + +module_init(hp680_ts_init); +module_exit(hp680_ts_exit); + +MODULE_AUTHOR("Andriy Skulysh, askulysh@image.kiev.ua"); +MODULE_DESCRIPTION("HP Jornada 680 touchscreen driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/htcpen.c b/ANDROID_3.4.5/drivers/input/touchscreen/htcpen.c new file mode 100644 index 00000000..d13143b6 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/htcpen.c @@ -0,0 +1,250 @@ +/* + * HTC Shift touchscreen driver + * + * Copyright (C) 2008 Pau Oliva Fora <pof@eslack.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/isa.h> +#include <linux/ioport.h> +#include <linux/dmi.h> + +MODULE_AUTHOR("Pau Oliva Fora <pau@eslack.org>"); +MODULE_DESCRIPTION("HTC Shift touchscreen driver"); +MODULE_LICENSE("GPL"); + +#define HTCPEN_PORT_IRQ_CLEAR 0x068 +#define HTCPEN_PORT_INIT 0x06c +#define HTCPEN_PORT_INDEX 0x0250 +#define HTCPEN_PORT_DATA 0x0251 +#define HTCPEN_IRQ 3 + +#define DEVICE_ENABLE 0xa2 +#define DEVICE_DISABLE 0xa3 + +#define X_INDEX 3 +#define Y_INDEX 5 +#define TOUCH_INDEX 0xb +#define LSB_XY_INDEX 0xc +#define X_AXIS_MAX 2040 +#define Y_AXIS_MAX 2040 + +static bool invert_x; +module_param(invert_x, bool, 0644); +MODULE_PARM_DESC(invert_x, "If set, X axis is inverted"); +static bool invert_y; +module_param(invert_y, bool, 0644); +MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted"); + +static irqreturn_t htcpen_interrupt(int irq, void *handle) +{ + struct input_dev *htcpen_dev = handle; + unsigned short x, y, xy; + + /* 0 = press; 1 = release */ + outb_p(TOUCH_INDEX, HTCPEN_PORT_INDEX); + + if (inb_p(HTCPEN_PORT_DATA)) { + input_report_key(htcpen_dev, BTN_TOUCH, 0); + } else { + outb_p(X_INDEX, HTCPEN_PORT_INDEX); + x = inb_p(HTCPEN_PORT_DATA); + + outb_p(Y_INDEX, HTCPEN_PORT_INDEX); + y = inb_p(HTCPEN_PORT_DATA); + + outb_p(LSB_XY_INDEX, HTCPEN_PORT_INDEX); + xy = inb_p(HTCPEN_PORT_DATA); + + /* get high resolution value of X and Y using LSB */ + x = X_AXIS_MAX - ((x * 8) + ((xy >> 4) & 0xf)); + y = (y * 8) + (xy & 0xf); + if (invert_x) + x = X_AXIS_MAX - x; + if (invert_y) + y = Y_AXIS_MAX - y; + + if (x != X_AXIS_MAX && x != 0) { + input_report_key(htcpen_dev, BTN_TOUCH, 1); + input_report_abs(htcpen_dev, ABS_X, x); + input_report_abs(htcpen_dev, ABS_Y, y); + } + } + + input_sync(htcpen_dev); + + inb_p(HTCPEN_PORT_IRQ_CLEAR); + + return IRQ_HANDLED; +} + +static int htcpen_open(struct input_dev *dev) +{ + outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT); + + return 0; +} + +static void htcpen_close(struct input_dev *dev) +{ + outb_p(DEVICE_DISABLE, HTCPEN_PORT_INIT); + synchronize_irq(HTCPEN_IRQ); +} + +static int __devinit htcpen_isa_probe(struct device *dev, unsigned int id) +{ + struct input_dev *htcpen_dev; + int err = -EBUSY; + + if (!request_region(HTCPEN_PORT_IRQ_CLEAR, 1, "htcpen")) { + printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n", + HTCPEN_PORT_IRQ_CLEAR); + goto request_region1_failed; + } + + if (!request_region(HTCPEN_PORT_INIT, 1, "htcpen")) { + printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n", + HTCPEN_PORT_INIT); + goto request_region2_failed; + } + + if (!request_region(HTCPEN_PORT_INDEX, 2, "htcpen")) { + printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n", + HTCPEN_PORT_INDEX); + goto request_region3_failed; + } + + htcpen_dev = input_allocate_device(); + if (!htcpen_dev) { + printk(KERN_ERR "htcpen: can't allocate device\n"); + err = -ENOMEM; + goto input_alloc_failed; + } + + htcpen_dev->name = "HTC Shift EC TouchScreen"; + htcpen_dev->id.bustype = BUS_ISA; + + htcpen_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); + htcpen_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(htcpen_dev, ABS_X, 0, X_AXIS_MAX, 0, 0); + input_set_abs_params(htcpen_dev, ABS_Y, 0, Y_AXIS_MAX, 0, 0); + + htcpen_dev->open = htcpen_open; + htcpen_dev->close = htcpen_close; + + err = request_irq(HTCPEN_IRQ, htcpen_interrupt, 0, "htcpen", + htcpen_dev); + if (err) { + printk(KERN_ERR "htcpen: irq busy\n"); + goto request_irq_failed; + } + + inb_p(HTCPEN_PORT_IRQ_CLEAR); + + err = input_register_device(htcpen_dev); + if (err) + goto input_register_failed; + + dev_set_drvdata(dev, htcpen_dev); + + return 0; + + input_register_failed: + free_irq(HTCPEN_IRQ, htcpen_dev); + request_irq_failed: + input_free_device(htcpen_dev); + input_alloc_failed: + release_region(HTCPEN_PORT_INDEX, 2); + request_region3_failed: + release_region(HTCPEN_PORT_INIT, 1); + request_region2_failed: + release_region(HTCPEN_PORT_IRQ_CLEAR, 1); + request_region1_failed: + return err; +} + +static int __devexit htcpen_isa_remove(struct device *dev, unsigned int id) +{ + struct input_dev *htcpen_dev = dev_get_drvdata(dev); + + input_unregister_device(htcpen_dev); + + free_irq(HTCPEN_IRQ, htcpen_dev); + + release_region(HTCPEN_PORT_INDEX, 2); + release_region(HTCPEN_PORT_INIT, 1); + release_region(HTCPEN_PORT_IRQ_CLEAR, 1); + + dev_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int htcpen_isa_suspend(struct device *dev, unsigned int n, + pm_message_t state) +{ + outb_p(DEVICE_DISABLE, HTCPEN_PORT_INIT); + + return 0; +} + +static int htcpen_isa_resume(struct device *dev, unsigned int n) +{ + outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT); + + return 0; +} +#endif + +static struct isa_driver htcpen_isa_driver = { + .probe = htcpen_isa_probe, + .remove = __devexit_p(htcpen_isa_remove), +#ifdef CONFIG_PM + .suspend = htcpen_isa_suspend, + .resume = htcpen_isa_resume, +#endif + .driver = { + .owner = THIS_MODULE, + .name = "htcpen", + } +}; + +static struct dmi_system_id __initdata htcshift_dmi_table[] = { + { + .ident = "Shift", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "High Tech Computer Corp"), + DMI_MATCH(DMI_PRODUCT_NAME, "Shift"), + }, + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, htcshift_dmi_table); + +static int __init htcpen_isa_init(void) +{ + if (!dmi_check_system(htcshift_dmi_table)) + return -ENODEV; + + return isa_register_driver(&htcpen_isa_driver, 1); +} + +static void __exit htcpen_isa_exit(void) +{ + isa_unregister_driver(&htcpen_isa_driver); +} + +module_init(htcpen_isa_init); +module_exit(htcpen_isa_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ili210x.c b/ANDROID_3.4.5/drivers/input/touchscreen/ili210x.c new file mode 100644 index 00000000..c0044175 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ili210x.c @@ -0,0 +1,360 @@ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/input/ili210x.h> + +#define MAX_TOUCHES 2 +#define DEFAULT_POLL_PERIOD 20 + +/* Touchscreen commands */ +#define REG_TOUCHDATA 0x10 +#define REG_PANEL_INFO 0x20 +#define REG_FIRMWARE_VERSION 0x40 +#define REG_CALIBRATE 0xcc + +struct finger { + u8 x_low; + u8 x_high; + u8 y_low; + u8 y_high; +} __packed; + +struct touchdata { + u8 status; + struct finger finger[MAX_TOUCHES]; +} __packed; + +struct panel_info { + struct finger finger_max; + u8 xchannel_num; + u8 ychannel_num; +} __packed; + +struct firmware_version { + u8 id; + u8 major; + u8 minor; +} __packed; + +struct ili210x { + struct i2c_client *client; + struct input_dev *input; + bool (*get_pendown_state)(void); + unsigned int poll_period; + struct delayed_work dwork; +}; + +static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, + size_t len) +{ + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + + if (i2c_transfer(client->adapter, msg, 2) != 2) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + + return 0; +} + +static void ili210x_report_events(struct input_dev *input, + const struct touchdata *touchdata) +{ + int i; + bool touch; + unsigned int x, y; + const struct finger *finger; + + for (i = 0; i < MAX_TOUCHES; i++) { + input_mt_slot(input, i); + + finger = &touchdata->finger[i]; + + touch = touchdata->status & (1 << i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + x = finger->x_low | (finger->x_high << 8); + y = finger->y_low | (finger->y_high << 8); + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + } + + input_mt_report_pointer_emulation(input, false); + input_sync(input); +} + +static bool get_pendown_state(const struct ili210x *priv) +{ + bool state = false; + + if (priv->get_pendown_state) + state = priv->get_pendown_state(); + + return state; +} + +static void ili210x_work(struct work_struct *work) +{ + struct ili210x *priv = container_of(work, struct ili210x, + dwork.work); + struct i2c_client *client = priv->client; + struct touchdata touchdata; + int error; + + error = ili210x_read_reg(client, REG_TOUCHDATA, + &touchdata, sizeof(touchdata)); + if (error) { + dev_err(&client->dev, + "Unable to get touchdata, err = %d\n", error); + return; + } + + ili210x_report_events(priv->input, &touchdata); + + if ((touchdata.status & 0xf3) || get_pendown_state(priv)) + schedule_delayed_work(&priv->dwork, + msecs_to_jiffies(priv->poll_period)); +} + +static irqreturn_t ili210x_irq(int irq, void *irq_data) +{ + struct ili210x *priv = irq_data; + + schedule_delayed_work(&priv->dwork, 0); + + return IRQ_HANDLED; +} + +static ssize_t ili210x_calibrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + unsigned long calibrate; + int rc; + u8 cmd = REG_CALIBRATE; + + if (kstrtoul(buf, 10, &calibrate)) + return -EINVAL; + + if (calibrate > 1) + return -EINVAL; + + if (calibrate) { + rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); + if (rc != sizeof(cmd)) + return -EIO; + } + + return count; +} +static DEVICE_ATTR(calibrate, 0644, NULL, ili210x_calibrate); + +static struct attribute *ili210x_attributes[] = { + &dev_attr_calibrate.attr, + NULL, +}; + +static const struct attribute_group ili210x_attr_group = { + .attrs = ili210x_attributes, +}; + +static int __devinit ili210x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct ili210x_platform_data *pdata = dev->platform_data; + struct ili210x *priv; + struct input_dev *input; + struct panel_info panel; + struct firmware_version firmware; + int xmax, ymax; + int error; + + dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + + if (!pdata) { + dev_err(dev, "No platform data!\n"); + return -EINVAL; + } + + if (client->irq <= 0) { + dev_err(dev, "No IRQ!\n"); + return -EINVAL; + } + + /* Get firmware version */ + error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, + &firmware, sizeof(firmware)); + if (error) { + dev_err(dev, "Failed to get firmware version, err: %d\n", + error); + return error; + } + + /* get panel info */ + error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); + if (error) { + dev_err(dev, "Failed to get panel informations, err: %d\n", + error); + return error; + } + + xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); + ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + input = input_allocate_device(); + if (!priv || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + priv->client = client; + priv->input = input; + priv->get_pendown_state = pdata->get_pendown_state; + priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; + INIT_DELAYED_WORK(&priv->dwork, ili210x_work); + + /* Setup input device */ + input->name = "ILI210x Touchscreen"; + input->id.bustype = BUS_I2C; + input->dev.parent = dev; + + __set_bit(EV_SYN, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + + /* Single touch */ + input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); + + /* Multi touch */ + input_mt_init_slots(input, MAX_TOUCHES); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); + + input_set_drvdata(input, priv); + i2c_set_clientdata(client, priv); + + error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, + client->name, priv); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", + error); + goto err_free_mem; + } + + error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); + if (error) { + dev_err(dev, "Unable to create sysfs attributes, err: %d\n", + error); + goto err_free_irq; + } + + error = input_register_device(priv->input); + if (error) { + dev_err(dev, "Cannot regiser input device, err: %d\n", error); + goto err_remove_sysfs; + } + + device_init_wakeup(&client->dev, 1); + + dev_dbg(dev, + "ILI210x initialized (IRQ: %d), firmware version %d.%d.%d", + client->irq, firmware.id, firmware.major, firmware.minor); + + return 0; + +err_remove_sysfs: + sysfs_remove_group(&dev->kobj, &ili210x_attr_group); +err_free_irq: + free_irq(client->irq, priv); +err_free_mem: + input_free_device(input); + kfree(priv); + return error; +} + +static int __devexit ili210x_i2c_remove(struct i2c_client *client) +{ + struct ili210x *priv = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); + free_irq(priv->client->irq, priv); + cancel_delayed_work_sync(&priv->dwork); + input_unregister_device(priv->input); + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ili210x_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int ili210x_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, + ili210x_i2c_suspend, ili210x_i2c_resume); + +static const struct i2c_device_id ili210x_i2c_id[] = { + { "ili210x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); + +static struct i2c_driver ili210x_ts_driver = { + .driver = { + .name = "ili210x_i2c", + .owner = THIS_MODULE, + .pm = &ili210x_i2c_pm, + }, + .id_table = ili210x_i2c_id, + .probe = ili210x_i2c_probe, + .remove = __devexit_p(ili210x_i2c_remove), +}; + +module_i2c_driver(ili210x_ts_driver); + +MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); +MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/inexio.c b/ANDROID_3.4.5/drivers/input/touchscreen/inexio.c new file mode 100644 index 00000000..192ade0a --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/inexio.c @@ -0,0 +1,207 @@ +/* + * iNexio serial touchscreen driver + * + * Copyright (c) 2008 Richard Lemon + * Based on the mtouch driver (c) Vojtech Pavlik and Dan Streetman + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2008/06/19 Richard Lemon <richard@codelemon.com> + * Copied mtouch.c and edited for iNexio protocol + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "iNexio serial touchscreen driver" + +MODULE_AUTHOR("Richard Lemon <richard@codelemon.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define INEXIO_FORMAT_TOUCH_BIT 0x01 +#define INEXIO_FORMAT_LENGTH 5 +#define INEXIO_RESPONSE_BEGIN_BYTE 0x80 + +/* todo: check specs for max length of all responses */ +#define INEXIO_MAX_LENGTH 16 + +#define INEXIO_MIN_XC 0 +#define INEXIO_MAX_XC 0x3fff +#define INEXIO_MIN_YC 0 +#define INEXIO_MAX_YC 0x3fff + +#define INEXIO_GET_XC(data) (((data[1])<<7) | data[2]) +#define INEXIO_GET_YC(data) (((data[3])<<7) | data[4]) +#define INEXIO_GET_TOUCHED(data) (INEXIO_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct inexio { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[INEXIO_MAX_LENGTH]; + char phys[32]; +}; + +static void inexio_process_data(struct inexio *pinexio) +{ + struct input_dev *dev = pinexio->dev; + + if (INEXIO_FORMAT_LENGTH == ++pinexio->idx) { + input_report_abs(dev, ABS_X, INEXIO_GET_XC(pinexio->data)); + input_report_abs(dev, ABS_Y, INEXIO_GET_YC(pinexio->data)); + input_report_key(dev, BTN_TOUCH, INEXIO_GET_TOUCHED(pinexio->data)); + input_sync(dev); + + pinexio->idx = 0; + } +} + +static irqreturn_t inexio_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct inexio* pinexio = serio_get_drvdata(serio); + + pinexio->data[pinexio->idx] = data; + + if (INEXIO_RESPONSE_BEGIN_BYTE&pinexio->data[0]) + inexio_process_data(pinexio); + else + printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]); + + return IRQ_HANDLED; +} + +/* + * inexio_disconnect() is the opposite of inexio_connect() + */ + +static void inexio_disconnect(struct serio *serio) +{ + struct inexio* pinexio = serio_get_drvdata(serio); + + input_get_device(pinexio->dev); + input_unregister_device(pinexio->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(pinexio->dev); + kfree(pinexio); +} + +/* + * inexio_connect() is the routine that is called when someone adds a + * new serio device that supports iNexio protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int inexio_connect(struct serio *serio, struct serio_driver *drv) +{ + struct inexio *pinexio; + struct input_dev *input_dev; + int err; + + pinexio = kzalloc(sizeof(struct inexio), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pinexio || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pinexio->serio = serio; + pinexio->dev = input_dev; + snprintf(pinexio->phys, sizeof(pinexio->phys), "%s/input0", serio->phys); + + input_dev->name = "iNexio Serial TouchScreen"; + input_dev->phys = pinexio->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_INEXIO; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(pinexio->dev, ABS_X, INEXIO_MIN_XC, INEXIO_MAX_XC, 0, 0); + input_set_abs_params(pinexio->dev, ABS_Y, INEXIO_MIN_YC, INEXIO_MAX_YC, 0, 0); + + serio_set_drvdata(serio, pinexio); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pinexio->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pinexio); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id inexio_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_INEXIO, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, inexio_serio_ids); + +static struct serio_driver inexio_drv = { + .driver = { + .name = "inexio", + }, + .description = DRIVER_DESC, + .id_table = inexio_serio_ids, + .interrupt = inexio_interrupt, + .connect = inexio_connect, + .disconnect = inexio_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init inexio_init(void) +{ + return serio_register_driver(&inexio_drv); +} + +static void __exit inexio_exit(void) +{ + serio_unregister_driver(&inexio_drv); +} + +module_init(inexio_init); +module_exit(inexio_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/intel-mid-touch.c b/ANDROID_3.4.5/drivers/input/touchscreen/intel-mid-touch.c new file mode 100644 index 00000000..3cd7a837 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/intel-mid-touch.c @@ -0,0 +1,671 @@ +/* + * Intel MID Resistive Touch Screen Driver + * + * Copyright (C) 2008 Intel Corp + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com) + * Ramesh Agarwal (ramesh.agarwal@intel.com) + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * TODO: + * review conversion of r/m/w sequences + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/param.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <asm/intel_scu_ipc.h> + +/* PMIC Interrupt registers */ +#define PMIC_REG_ID1 0x00 /* PMIC ID1 register */ + +/* PMIC Interrupt registers */ +#define PMIC_REG_INT 0x04 /* PMIC interrupt register */ +#define PMIC_REG_MINT 0x05 /* PMIC interrupt mask register */ + +/* ADC Interrupt registers */ +#define PMIC_REG_ADCINT 0x5F /* ADC interrupt register */ +#define PMIC_REG_MADCINT 0x60 /* ADC interrupt mask register */ + +/* ADC Control registers */ +#define PMIC_REG_ADCCNTL1 0x61 /* ADC control register */ + +/* ADC Channel Selection registers */ +#define PMICADDR0 0xA4 +#define END_OF_CHANNEL 0x1F + +/* ADC Result register */ +#define PMIC_REG_ADCSNS0H 0x64 + +/* ADC channels for touch screen */ +#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ +#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ +#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ +#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ + +/* Touch screen channel BIAS constants */ +#define MRST_XBIAS 0x20 +#define MRST_YBIAS 0x40 +#define MRST_ZBIAS 0x80 + +/* Touch screen coordinates */ +#define MRST_X_MIN 10 +#define MRST_X_MAX 1024 +#define MRST_X_FUZZ 5 +#define MRST_Y_MIN 10 +#define MRST_Y_MAX 1024 +#define MRST_Y_FUZZ 5 +#define MRST_PRESSURE_MIN 0 +#define MRST_PRESSURE_NOMINAL 50 +#define MRST_PRESSURE_MAX 100 + +#define WAIT_ADC_COMPLETION 10 /* msec */ + +/* PMIC ADC round robin delays */ +#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ +#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ + +/* PMIC Vendor Identifiers */ +#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ +#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ +#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ +#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ + +/* Touch screen device structure */ +struct mrstouch_dev { + struct device *dev; /* device associated with touch screen */ + struct input_dev *input; + char phys[32]; + u16 asr; /* Address selection register */ + int irq; + unsigned int vendor; /* PMIC vendor */ + unsigned int rev; /* PMIC revision */ + + int (*read_prepare)(struct mrstouch_dev *tsdev); + int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z); + int (*read_finish)(struct mrstouch_dev *tsdev); +}; + + +/*************************** NEC and Maxim Interface ************************/ + +static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) +{ + return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20); +} + +/* + * Enables PENDET interrupt. + */ +static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20); + if (!err) + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05); + + return err; +} + +/* + * Reads PMIC ADC touch screen result + * Reads ADC storage registers for higher 7 and lower 3 bits and + * converts the two readings into a single value and turns off gain bit + */ +static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) +{ + int err; + u16 result; + u32 res; + + result = PMIC_REG_ADCSNS0H + offset; + + if (chan == MRST_TS_CHAN12) + result += 4; + + err = intel_scu_ipc_ioread32(result, &res); + if (err) + return err; + + /* Mash the bits up */ + + *vp = (res & 0xFF) << 3; /* Highest 7 bits */ + *vp |= (res >> 8) & 0x07; /* Lower 3 bits */ + *vp &= 0x3FF; + + res >>= 16; + + *vm = (res & 0xFF) << 3; /* Highest 7 bits */ + *vm |= (res >> 8) & 0x07; /* Lower 3 bits */ + *vm &= 0x3FF; + + return 0; +} + +/* + * Enables X, Y and Z bias values + * Enables YPYM for X channels and XPXM for Y channels + */ +static int mrstouch_ts_bias_set(uint offset, uint bias) +{ + int count; + u16 chan, start; + u16 reg[4]; + u8 data[4]; + + chan = PMICADDR0 + offset; + start = MRST_TS_CHAN10; + + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = bias | (start + count); + } + + return intel_scu_ipc_writev(reg, data, 4); +} + +/* To read touch screen channel values */ +static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 xm, ym, zm; + + /* configure Y bias for X channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read x+ and x- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm); + if (err) + goto ipc_error; + + /* configure x bias for y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read y+ and y- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym); + if (err) + goto ipc_error; + + /* configure z bias for x and y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read z+ and z- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm); + if (err) + goto ipc_error; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during adc read\n"); + return err; +} + + +/*************************** Freescale Interface ************************/ + +static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; + + /* Stop the ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); + if (err) + goto ipc_error; + + chan = PMICADDR0 + tsdev->asr; + + /* Set X BIAS */ + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = 0x2A; + } + reg[count] = chan++; /* Dummy */ + data[count] = 0; + + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* Set Y BIAS */ + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = 0x4A; + } + reg[count] = chan++; /* Dummy */ + data[count] = 0; + + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* Set Z BIAS */ + err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 result; + u16 reg[4]; + u8 data[4]; + + result = PMIC_REG_ADCSNS0H + tsdev->asr; + + reg[0] = result + 4; + reg[1] = result + 5; + reg[2] = result + 16; + reg[3] = result + 17; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *x = data[0] << 3; /* Higher 7 bits */ + *x |= data[1] & 0x7; /* Lower 3 bits */ + *x &= 0x3FF; + + *y = data[2] << 3; /* Higher 7 bits */ + *y |= data[3] & 0x7; /* Lower 3 bits */ + *y &= 0x3FF; + + /* Read Z value */ + reg[0] = result + 28; + reg[1] = result + 29; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *z = data[0] << 3; /* Higher 7 bits */ + *z |= data[1] & 0x7; /* Lower 3 bits */ + *z &= 0x3FF; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; + + /* Clear all TS channels */ + chan = PMICADDR0 + tsdev->asr; + for (count = 0; count <= 4; count++) { + reg[count] = chan++; + data[count] = 0; + } + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + for (count = 0; count <= 4; count++) { + reg[count] = chan++; + data[count] = 0; + } + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000); + if (err) + goto ipc_error; + + /* Start ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); + if (err) + goto ipc_error; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static void mrstouch_report_event(struct input_dev *input, + unsigned int x, unsigned int y, unsigned int z) +{ + if (z > MRST_PRESSURE_NOMINAL) { + /* Pen touched, report button touch and coordinates */ + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } else { + input_report_key(input, BTN_TOUCH, 0); + } + + input_report_abs(input, ABS_PRESSURE, z); + input_sync(input); +} + +/* PENDET interrupt handler */ +static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id) +{ + struct mrstouch_dev *tsdev = dev_id; + u16 x, y, z; + + /* + * Should we lower thread priority? Probably not, since we are + * not spinning but sleeping... + */ + + if (tsdev->read_prepare(tsdev)) + goto out; + + do { + if (tsdev->read(tsdev, &x, &y, &z)) + break; + + mrstouch_report_event(tsdev->input, x, y, z); + } while (z > MRST_PRESSURE_NOMINAL); + + tsdev->read_finish(tsdev); + +out: + return IRQ_HANDLED; +} + +/* Utility to read PMIC ID */ +static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) +{ + int err; + u8 r; + + err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); + if (err) + return err; + + *vendor = r & 0x7; + *rev = (r >> 3) & 0x7; + + return 0; +} + +/* + * Parse ADC channels to find end of the channel configured by other ADC user + * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels + */ +static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) +{ + int found = 0; + int err, i; + u8 r8; + + for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { + err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8); + if (err) + return err; + + if (r8 == END_OF_CHANNEL) { + found = i; + break; + } + } + + if (tsdev->vendor == PMIC_VENDOR_FS) { + if (found > MRSTOUCH_MAX_CHANNELS - 18) + return -ENOSPC; + } else { + if (found > MRSTOUCH_MAX_CHANNELS - 4) + return -ENOSPC; + } + + return found; +} + + +/* + * Writes touch screen channels to ADC address selection registers + */ +static int __devinit mrstouch_ts_chan_set(uint offset) +{ + u16 chan; + + int ret, count; + + chan = PMICADDR0 + offset; + for (count = 0; count <= 3; count++) { + ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count); + if (ret) + return ret; + } + return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL); +} + +/* Initialize ADC */ +static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) +{ + int err, start; + u8 ra, rm; + + err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev); + if (err) { + dev_err(tsdev->dev, "Unable to read PMIC id\n"); + return err; + } + + switch (tsdev->vendor) { + case PMIC_VENDOR_NEC: + case PMIC_VENDOR_MAXIM: + tsdev->read_prepare = mrstouch_nec_adc_read_prepare; + tsdev->read = mrstouch_nec_adc_read; + tsdev->read_finish = mrstouch_nec_adc_read_finish; + break; + + case PMIC_VENDOR_FS: + tsdev->read_prepare = mrstouch_fs_adc_read_prepare; + tsdev->read = mrstouch_fs_adc_read; + tsdev->read_finish = mrstouch_fs_adc_read_finish; + break; + + default: + dev_err(tsdev->dev, + "Unsupported touchscreen: %d\n", tsdev->vendor); + return -ENXIO; + } + + start = mrstouch_chan_parse(tsdev); + if (start < 0) { + dev_err(tsdev->dev, "Unable to parse channels\n"); + return start; + } + + tsdev->asr = start; + + /* + * ADC power on, start, enable PENDET and set loop delay + * ADC loop delay is set to 4.5 ms approximately + * Loop delay more than this results in jitter in adc readings + * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET + * interrupt generation sometimes. + */ + + if (tsdev->vendor == PMIC_VENDOR_FS) { + ra = 0xE0 | ADC_LOOP_DELAY0; + rm = 0x5; + } else { + /* NEC and MAXIm not consistent with loop delay 0 */ + ra = 0xE0 | ADC_LOOP_DELAY1; + rm = 0x0; + + /* configure touch screen channels */ + err = mrstouch_ts_chan_set(tsdev->asr); + if (err) + return err; + } + + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); + if (err) + return err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); + if (err) + return err; + + return 0; +} + + +/* Probe function for touch screen driver */ +static int __devinit mrstouch_probe(struct platform_device *pdev) +{ + struct mrstouch_dev *tsdev; + struct input_dev *input; + int err; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no interrupt assigned\n"); + return -EINVAL; + } + + tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); + input = input_allocate_device(); + if (!tsdev || !input) { + dev_err(&pdev->dev, "unable to allocate memory\n"); + err = -ENOMEM; + goto err_free_mem; + } + + tsdev->dev = &pdev->dev; + tsdev->input = input; + tsdev->irq = irq; + + snprintf(tsdev->phys, sizeof(tsdev->phys), + "%s/input0", dev_name(tsdev->dev)); + + err = mrstouch_adc_init(tsdev); + if (err) { + dev_err(&pdev->dev, "ADC initialization failed\n"); + goto err_free_mem; + } + + input->name = "mrst_touchscreen"; + input->phys = tsdev->phys; + input->dev.parent = tsdev->dev; + + input->id.vendor = tsdev->vendor; + input->id.version = tsdev->rev; + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(tsdev->input, ABS_X, + MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_Y, + MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_PRESSURE, + MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0); + + err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, + 0, "mrstouch", tsdev); + if (err) { + dev_err(tsdev->dev, "unable to allocate irq\n"); + goto err_free_mem; + } + + err = input_register_device(tsdev->input); + if (err) { + dev_err(tsdev->dev, "unable to register input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, tsdev); + return 0; + +err_free_irq: + free_irq(tsdev->irq, tsdev); +err_free_mem: + input_free_device(input); + kfree(tsdev); + return err; +} + +static int __devexit mrstouch_remove(struct platform_device *pdev) +{ + struct mrstouch_dev *tsdev = platform_get_drvdata(pdev); + + free_irq(tsdev->irq, tsdev); + input_unregister_device(tsdev->input); + kfree(tsdev); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver mrstouch_driver = { + .driver = { + .name = "pmic_touch", + .owner = THIS_MODULE, + }, + .probe = mrstouch_probe, + .remove = __devexit_p(mrstouch_remove), +}; +module_platform_driver(mrstouch_driver); + +MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); +MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/jornada720_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/jornada720_ts.c new file mode 100644 index 00000000..d9be6eac --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/jornada720_ts.c @@ -0,0 +1,176 @@ +/* + * drivers/input/touchscreen/jornada720_ts.c + * + * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> + * + * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl> + * based on HP Jornada 56x touchscreen driver by Alex Lange <chicken@handhelds.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * HP Jornada 710/720/729 Touchscreen Driver + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <mach/hardware.h> +#include <mach/jornada720.h> +#include <mach/irqs.h> + +MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); +MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver"); +MODULE_LICENSE("GPL v2"); + +struct jornada_ts { + struct input_dev *dev; + int x_data[4]; /* X sample values */ + int y_data[4]; /* Y sample values */ +}; + +static void jornada720_ts_collect_data(struct jornada_ts *jornada_ts) +{ + + /* 3 low word X samples */ + jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY); + jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY); + jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY); + + /* 3 low word Y samples */ + jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY); + jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY); + jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY); + + /* combined x samples bits */ + jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY); + + /* combined y samples bits */ + jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY); +} + +static int jornada720_ts_average(int coords[4]) +{ + int coord, high_bits = coords[3]; + + coord = coords[0] | ((high_bits & 0x03) << 8); + coord += coords[1] | ((high_bits & 0x0c) << 6); + coord += coords[2] | ((high_bits & 0x30) << 4); + + return coord / 3; +} + +static irqreturn_t jornada720_ts_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct jornada_ts *jornada_ts = platform_get_drvdata(pdev); + struct input_dev *input = jornada_ts->dev; + int x, y; + + /* If GPIO_GPIO9 is set to high then report pen up */ + if (GPLR & GPIO_GPIO(9)) { + input_report_key(input, BTN_TOUCH, 0); + input_sync(input); + } else { + jornada_ssp_start(); + + /* proper reply to request is always TXDUMMY */ + if (jornada_ssp_inout(GETTOUCHSAMPLES) == TXDUMMY) { + jornada720_ts_collect_data(jornada_ts); + + x = jornada720_ts_average(jornada_ts->x_data); + y = jornada720_ts_average(jornada_ts->y_data); + + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_sync(input); + } + + jornada_ssp_end(); + } + + return IRQ_HANDLED; +} + +static int __devinit jornada720_ts_probe(struct platform_device *pdev) +{ + struct jornada_ts *jornada_ts; + struct input_dev *input_dev; + int error; + + jornada_ts = kzalloc(sizeof(struct jornada_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + + if (!jornada_ts || !input_dev) { + error = -ENOMEM; + goto fail1; + } + + platform_set_drvdata(pdev, jornada_ts); + + jornada_ts->dev = input_dev; + + input_dev->name = "HP Jornada 7xx Touchscreen"; + input_dev->phys = "jornadats/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0); + + error = request_irq(IRQ_GPIO9, + jornada720_ts_interrupt, + IRQF_TRIGGER_RISING, + "HP7XX Touchscreen driver", pdev); + if (error) { + printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n"); + goto fail1; + } + + error = input_register_device(jornada_ts->dev); + if (error) + goto fail2; + + return 0; + + fail2: + free_irq(IRQ_GPIO9, pdev); + fail1: + platform_set_drvdata(pdev, NULL); + input_free_device(input_dev); + kfree(jornada_ts); + return error; +} + +static int __devexit jornada720_ts_remove(struct platform_device *pdev) +{ + struct jornada_ts *jornada_ts = platform_get_drvdata(pdev); + + free_irq(IRQ_GPIO9, pdev); + platform_set_drvdata(pdev, NULL); + input_unregister_device(jornada_ts->dev); + kfree(jornada_ts); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:jornada_ts"); + +static struct platform_driver jornada720_ts_driver = { + .probe = jornada720_ts_probe, + .remove = __devexit_p(jornada720_ts_remove), + .driver = { + .name = "jornada_ts", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(jornada720_ts_driver); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/lpc32xx_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/lpc32xx_ts.c new file mode 100644 index 00000000..afcd0691 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/lpc32xx_ts.c @@ -0,0 +1,400 @@ +/* + * LPC32xx built-in touchscreen driver + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> + +/* + * Touchscreen controller register offsets + */ +#define LPC32XX_TSC_STAT 0x00 +#define LPC32XX_TSC_SEL 0x04 +#define LPC32XX_TSC_CON 0x08 +#define LPC32XX_TSC_FIFO 0x0C +#define LPC32XX_TSC_DTR 0x10 +#define LPC32XX_TSC_RTR 0x14 +#define LPC32XX_TSC_UTR 0x18 +#define LPC32XX_TSC_TTR 0x1C +#define LPC32XX_TSC_DXP 0x20 +#define LPC32XX_TSC_MIN_X 0x24 +#define LPC32XX_TSC_MAX_X 0x28 +#define LPC32XX_TSC_MIN_Y 0x2C +#define LPC32XX_TSC_MAX_Y 0x30 +#define LPC32XX_TSC_AUX_UTR 0x34 +#define LPC32XX_TSC_AUX_MIN 0x38 +#define LPC32XX_TSC_AUX_MAX 0x3C + +#define LPC32XX_TSC_STAT_FIFO_OVRRN (1 << 8) +#define LPC32XX_TSC_STAT_FIFO_EMPTY (1 << 7) + +#define LPC32XX_TSC_SEL_DEFVAL 0x0284 + +#define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 (0x1 << 11) +#define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s) ((10 - (s)) << 7) +#define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s) ((10 - (s)) << 4) +#define LPC32XX_TSC_ADCCON_POWER_UP (1 << 2) +#define LPC32XX_TSC_ADCCON_AUTO_EN (1 << 0) + +#define LPC32XX_TSC_FIFO_TS_P_LEVEL (1 << 31) +#define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x) (((x) & 0x03FF0000) >> 16) +#define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y) ((y) & 0x000003FF) + +#define LPC32XX_TSC_ADCDAT_VALUE_MASK 0x000003FF + +#define LPC32XX_TSC_MIN_XY_VAL 0x0 +#define LPC32XX_TSC_MAX_XY_VAL 0x3FF + +#define MOD_NAME "ts-lpc32xx" + +#define tsc_readl(dev, reg) \ + __raw_readl((dev)->tsc_base + (reg)) +#define tsc_writel(dev, reg, val) \ + __raw_writel((val), (dev)->tsc_base + (reg)) + +struct lpc32xx_tsc { + struct input_dev *dev; + void __iomem *tsc_base; + int irq; + struct clk *clk; +}; + +static void lpc32xx_fifo_clear(struct lpc32xx_tsc *tsc) +{ + while (!(tsc_readl(tsc, LPC32XX_TSC_STAT) & + LPC32XX_TSC_STAT_FIFO_EMPTY)) + tsc_readl(tsc, LPC32XX_TSC_FIFO); +} + +static irqreturn_t lpc32xx_ts_interrupt(int irq, void *dev_id) +{ + u32 tmp, rv[4], xs[4], ys[4]; + int idx; + struct lpc32xx_tsc *tsc = dev_id; + struct input_dev *input = tsc->dev; + + tmp = tsc_readl(tsc, LPC32XX_TSC_STAT); + + if (tmp & LPC32XX_TSC_STAT_FIFO_OVRRN) { + /* FIFO overflow - throw away samples */ + lpc32xx_fifo_clear(tsc); + return IRQ_HANDLED; + } + + /* + * Gather and normalize 4 samples. Pen-up events may have less + * than 4 samples, but its ok to pop 4 and let the last sample + * pen status check drop the samples. + */ + idx = 0; + while (idx < 4 && + !(tsc_readl(tsc, LPC32XX_TSC_STAT) & + LPC32XX_TSC_STAT_FIFO_EMPTY)) { + tmp = tsc_readl(tsc, LPC32XX_TSC_FIFO); + xs[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK - + LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(tmp); + ys[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK - + LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(tmp); + rv[idx] = tmp; + idx++; + } + + /* Data is only valid if pen is still down in last sample */ + if (!(rv[3] & LPC32XX_TSC_FIFO_TS_P_LEVEL) && idx == 4) { + /* Use average of 2nd and 3rd sample for position */ + input_report_abs(input, ABS_X, (xs[1] + xs[2]) / 2); + input_report_abs(input, ABS_Y, (ys[1] + ys[2]) / 2); + input_report_key(input, BTN_TOUCH, 1); + } else { + input_report_key(input, BTN_TOUCH, 0); + } + + input_sync(input); + + return IRQ_HANDLED; +} + +static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc) +{ + /* Disable auto mode */ + tsc_writel(tsc, LPC32XX_TSC_CON, + tsc_readl(tsc, LPC32XX_TSC_CON) & + ~LPC32XX_TSC_ADCCON_AUTO_EN); + + clk_disable(tsc->clk); +} + +static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc) +{ + u32 tmp; + + clk_enable(tsc->clk); + + tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP; + + /* Set the TSC FIFO depth to 4 samples @ 10-bits per sample (max) */ + tmp = LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 | + LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(10) | + LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(10); + tsc_writel(tsc, LPC32XX_TSC_CON, tmp); + + /* These values are all preset */ + tsc_writel(tsc, LPC32XX_TSC_SEL, LPC32XX_TSC_SEL_DEFVAL); + tsc_writel(tsc, LPC32XX_TSC_MIN_X, LPC32XX_TSC_MIN_XY_VAL); + tsc_writel(tsc, LPC32XX_TSC_MAX_X, LPC32XX_TSC_MAX_XY_VAL); + tsc_writel(tsc, LPC32XX_TSC_MIN_Y, LPC32XX_TSC_MIN_XY_VAL); + tsc_writel(tsc, LPC32XX_TSC_MAX_Y, LPC32XX_TSC_MAX_XY_VAL); + + /* Aux support is not used */ + tsc_writel(tsc, LPC32XX_TSC_AUX_UTR, 0); + tsc_writel(tsc, LPC32XX_TSC_AUX_MIN, 0); + tsc_writel(tsc, LPC32XX_TSC_AUX_MAX, 0); + + /* + * Set sample rate to about 240Hz per X/Y pair. A single measurement + * consists of 4 pairs which gives about a 60Hz sample rate based on + * a stable 32768Hz clock source. Values are in clocks. + * Rate is (32768 / (RTR + XCONV + RTR + YCONV + DXP + TTR + UTR) / 4 + */ + tsc_writel(tsc, LPC32XX_TSC_RTR, 0x2); + tsc_writel(tsc, LPC32XX_TSC_DTR, 0x2); + tsc_writel(tsc, LPC32XX_TSC_TTR, 0x10); + tsc_writel(tsc, LPC32XX_TSC_DXP, 0x4); + tsc_writel(tsc, LPC32XX_TSC_UTR, 88); + + lpc32xx_fifo_clear(tsc); + + /* Enable automatic ts event capture */ + tsc_writel(tsc, LPC32XX_TSC_CON, tmp | LPC32XX_TSC_ADCCON_AUTO_EN); +} + +static int lpc32xx_ts_open(struct input_dev *dev) +{ + struct lpc32xx_tsc *tsc = input_get_drvdata(dev); + + lpc32xx_setup_tsc(tsc); + + return 0; +} + +static void lpc32xx_ts_close(struct input_dev *dev) +{ + struct lpc32xx_tsc *tsc = input_get_drvdata(dev); + + lpc32xx_stop_tsc(tsc); +} + +static int __devinit lpc32xx_ts_probe(struct platform_device *pdev) +{ + struct lpc32xx_tsc *tsc; + struct input_dev *input; + struct resource *res; + resource_size_t size; + int irq; + int error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Can't get memory resource\n"); + return -ENOENT; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Can't get interrupt resource\n"); + return irq; + } + + tsc = kzalloc(sizeof(*tsc), GFP_KERNEL); + input = input_allocate_device(); + if (!tsc || !input) { + dev_err(&pdev->dev, "failed allocating memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + tsc->dev = input; + tsc->irq = irq; + + size = resource_size(res); + + if (!request_mem_region(res->start, size, pdev->name)) { + dev_err(&pdev->dev, "TSC registers are not free\n"); + error = -EBUSY; + goto err_free_mem; + } + + tsc->tsc_base = ioremap(res->start, size); + if (!tsc->tsc_base) { + dev_err(&pdev->dev, "Can't map memory\n"); + error = -ENOMEM; + goto err_release_mem; + } + + tsc->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(tsc->clk)) { + dev_err(&pdev->dev, "failed getting clock\n"); + error = PTR_ERR(tsc->clk); + goto err_unmap; + } + + input->name = MOD_NAME; + input->phys = "lpc32xx/input0"; + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0002; + input->id.version = 0x0100; + input->dev.parent = &pdev->dev; + input->open = lpc32xx_ts_open; + input->close = lpc32xx_ts_close; + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input, ABS_X, LPC32XX_TSC_MIN_XY_VAL, + LPC32XX_TSC_MAX_XY_VAL, 0, 0); + input_set_abs_params(input, ABS_Y, LPC32XX_TSC_MIN_XY_VAL, + LPC32XX_TSC_MAX_XY_VAL, 0, 0); + + input_set_drvdata(input, tsc); + + error = request_irq(tsc->irq, lpc32xx_ts_interrupt, + 0, pdev->name, tsc); + if (error) { + dev_err(&pdev->dev, "failed requesting interrupt\n"); + goto err_put_clock; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "failed registering input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, tsc); + device_init_wakeup(&pdev->dev, 1); + + return 0; + +err_free_irq: + free_irq(tsc->irq, tsc); +err_put_clock: + clk_put(tsc->clk); +err_unmap: + iounmap(tsc->tsc_base); +err_release_mem: + release_mem_region(res->start, size); +err_free_mem: + input_free_device(input); + kfree(tsc); + + return error; +} + +static int __devexit lpc32xx_ts_remove(struct platform_device *pdev) +{ + struct lpc32xx_tsc *tsc = platform_get_drvdata(pdev); + struct resource *res; + + device_init_wakeup(&pdev->dev, 0); + free_irq(tsc->irq, tsc); + + input_unregister_device(tsc->dev); + + clk_put(tsc->clk); + + iounmap(tsc->tsc_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(tsc); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_ts_suspend(struct device *dev) +{ + struct lpc32xx_tsc *tsc = dev_get_drvdata(dev); + struct input_dev *input = tsc->dev; + + /* + * Suspend and resume can be called when the device hasn't been + * enabled. If there are no users that have the device open, then + * avoid calling the TSC stop and start functions as the TSC + * isn't yet clocked. + */ + mutex_lock(&input->mutex); + + if (input->users) { + if (device_may_wakeup(dev)) + enable_irq_wake(tsc->irq); + else + lpc32xx_stop_tsc(tsc); + } + + mutex_unlock(&input->mutex); + + return 0; +} + +static int lpc32xx_ts_resume(struct device *dev) +{ + struct lpc32xx_tsc *tsc = dev_get_drvdata(dev); + struct input_dev *input = tsc->dev; + + mutex_lock(&input->mutex); + + if (input->users) { + if (device_may_wakeup(dev)) + disable_irq_wake(tsc->irq); + else + lpc32xx_setup_tsc(tsc); + } + + mutex_unlock(&input->mutex); + + return 0; +} + +static const struct dev_pm_ops lpc32xx_ts_pm_ops = { + .suspend = lpc32xx_ts_suspend, + .resume = lpc32xx_ts_resume, +}; +#define LPC32XX_TS_PM_OPS (&lpc32xx_ts_pm_ops) +#else +#define LPC32XX_TS_PM_OPS NULL +#endif + +static struct platform_driver lpc32xx_ts_driver = { + .probe = lpc32xx_ts_probe, + .remove = __devexit_p(lpc32xx_ts_remove), + .driver = { + .name = MOD_NAME, + .owner = THIS_MODULE, + .pm = LPC32XX_TS_PM_OPS, + }, +}; +module_platform_driver(lpc32xx_ts_driver); + +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com"); +MODULE_DESCRIPTION("LPC32XX TSC Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc32xx_ts"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/mainstone-wm97xx.c b/ANDROID_3.4.5/drivers/input/touchscreen/mainstone-wm97xx.c new file mode 100644 index 00000000..7d2b2136 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/mainstone-wm97xx.c @@ -0,0 +1,310 @@ +/* + * mainstone-wm97xx.c -- Mainstone Continuous Touch screen driver for + * Wolfson WM97xx AC97 Codecs. + * + * Copyright 2004, 2007 Wolfson Microelectronics PLC. + * Author: Liam Girdwood <lrg@slimlogic.co.uk> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Notes: + * This is a wm97xx extended touch driver to capture touch + * data in a continuous manner on the Intel XScale architecture + * + * Features: + * - codecs supported:- WM9705, WM9712, WM9713 + * - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/wm97xx.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/regs-ac97.h> + +#include <asm/mach-types.h> + +struct continuous { + u16 id; /* codec id */ + u8 code; /* continuous code */ + u8 reads; /* number of coord reads per read cycle */ + u32 speed; /* number of coords per second */ +}; + +#define WM_READS(sp) ((sp / HZ) + 1) + +static const struct continuous cinfo[] = { + {WM9705_ID2, 0, WM_READS(94), 94}, + {WM9705_ID2, 1, WM_READS(188), 188}, + {WM9705_ID2, 2, WM_READS(375), 375}, + {WM9705_ID2, 3, WM_READS(750), 750}, + {WM9712_ID2, 0, WM_READS(94), 94}, + {WM9712_ID2, 1, WM_READS(188), 188}, + {WM9712_ID2, 2, WM_READS(375), 375}, + {WM9712_ID2, 3, WM_READS(750), 750}, + {WM9713_ID2, 0, WM_READS(94), 94}, + {WM9713_ID2, 1, WM_READS(120), 120}, + {WM9713_ID2, 2, WM_READS(154), 154}, + {WM9713_ID2, 3, WM_READS(188), 188}, +}; + +/* continuous speed index */ +static int sp_idx; +static u16 last, tries; +static int irq; + +/* + * Pen sampling frequency (Hz) in continuous mode. + */ +static int cont_rate = 200; +module_param(cont_rate, int, 0); +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); + +/* + * Pen down detection. + * + * This driver can either poll or use an interrupt to indicate a pen down + * event. If the irq request fails then it will fall back to polling mode. + */ +static int pen_int; +module_param(pen_int, int, 0); +MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)"); + +/* + * Pressure readback. + * + * Set to 1 to read back pen down pressure + */ +static int pressure; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); + +/* + * AC97 touch data slot. + * + * Touch screen readback data ac97 slot + */ +static int ac97_touch_slot = 5; +module_param(ac97_touch_slot, int, 0); +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); + + +/* flush AC97 slot 5 FIFO on pxa machines */ +#ifdef CONFIG_PXA27x +static void wm97xx_acc_pen_up(struct wm97xx *wm) +{ + schedule_timeout_uninterruptible(1); + + while (MISR & (1 << 2)) + MODR; +} +#else +static void wm97xx_acc_pen_up(struct wm97xx *wm) +{ + unsigned int count; + + schedule_timeout_uninterruptible(1); + + for (count = 0; count < 16; count++) + MODR; +} +#endif + +static int wm97xx_acc_pen_down(struct wm97xx *wm) +{ + u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; + int reads = 0; + + /* When the AC97 queue has been drained we need to allow time + * to buffer up samples otherwise we end up spinning polling + * for samples. The controller can't have a suitably low + * threshold set to use the notifications it gives. + */ + schedule_timeout_uninterruptible(1); + + if (tries > 5) { + tries = 0; + return RC_PENUP; + } + + x = MODR; + if (x == last) { + tries++; + return RC_AGAIN; + } + last = x; + do { + if (reads) + x = MODR; + y = MODR; + if (pressure) + p = MODR; + + dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n", + x, y, p); + + /* are samples valid */ + if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X || + (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y || + (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES) + goto up; + + /* coordinate is good */ + tries = 0; + input_report_abs(wm->input_dev, ABS_X, x & 0xfff); + input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); + input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); + input_sync(wm->input_dev); + reads++; + } while (reads < cinfo[sp_idx].reads); +up: + return RC_PENDOWN | RC_AGAIN; +} + +static int wm97xx_acc_startup(struct wm97xx *wm) +{ + int idx = 0, ret = 0; + + /* check we have a codec */ + if (wm->ac97 == NULL) + return -ENODEV; + + /* Go you big red fire engine */ + for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { + if (wm->id != cinfo[idx].id) + continue; + sp_idx = idx; + if (cont_rate <= cinfo[idx].speed) + break; + } + wm->acc_rate = cinfo[sp_idx].code; + wm->acc_slot = ac97_touch_slot; + dev_info(wm->dev, + "mainstone accelerated touchscreen driver, %d samples/sec\n", + cinfo[sp_idx].speed); + + /* IRQ driven touchscreen is used on Palm hardware */ + if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) { + pen_int = 1; + irq = 27; + /* There is some obscure mutant of WM9712 interbred with WM9713 + * used on Palm HW */ + wm->variant = WM97xx_WM1613; + } else if (machine_is_mainstone() && pen_int) + irq = 4; + + if (irq) { + ret = gpio_request(irq, "Touchscreen IRQ"); + if (ret) + goto out; + + ret = gpio_direction_input(irq); + if (ret) { + gpio_free(irq); + goto out; + } + + wm->pen_irq = gpio_to_irq(irq); + irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH); + } else /* pen irq not supported */ + pen_int = 0; + + /* codec specific irq config */ + if (pen_int) { + switch (wm->id) { + case WM9705_ID2: + break; + case WM9712_ID2: + case WM9713_ID2: + /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */ + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_STICKY, + WM97XX_GPIO_WAKE); + wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_NOTSTICKY, + WM97XX_GPIO_NOWAKE); + break; + default: + dev_err(wm->dev, + "pen down irq not supported on this device\n"); + pen_int = 0; + break; + } + } + +out: + return ret; +} + +static void wm97xx_acc_shutdown(struct wm97xx *wm) +{ + /* codec specific deconfig */ + if (pen_int) { + if (irq) + gpio_free(irq); + wm->pen_irq = 0; + } +} + +static void wm97xx_irq_enable(struct wm97xx *wm, int enable) +{ + if (enable) + enable_irq(wm->pen_irq); + else + disable_irq_nosync(wm->pen_irq); +} + +static struct wm97xx_mach_ops mainstone_mach_ops = { + .acc_enabled = 1, + .acc_pen_up = wm97xx_acc_pen_up, + .acc_pen_down = wm97xx_acc_pen_down, + .acc_startup = wm97xx_acc_startup, + .acc_shutdown = wm97xx_acc_shutdown, + .irq_enable = wm97xx_irq_enable, + .irq_gpio = WM97XX_GPIO_2, +}; + +static int mainstone_wm97xx_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + + return wm97xx_register_mach_ops(wm, &mainstone_mach_ops); +} + +static int mainstone_wm97xx_remove(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + + wm97xx_unregister_mach_ops(wm); + return 0; +} + +static struct platform_driver mainstone_wm97xx_driver = { + .probe = mainstone_wm97xx_probe, + .remove = mainstone_wm97xx_remove, + .driver = { + .name = "wm97xx-touch", + }, +}; +module_platform_driver(mainstone_wm97xx_driver); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>"); +MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/max11801_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/max11801_ts.c new file mode 100644 index 00000000..4eab50b8 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/max11801_ts.c @@ -0,0 +1,262 @@ +/* + * Driver for MAXI MAX11801 - A Resistive touch screen controller with + * i2c interface + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Zhang Jiejing <jiejing.zhang@freescale.com> + * + * Based on mcs5000_ts.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * This driver aims to support the series of MAXI touch chips max11801 + * through max11803. The main difference between these 4 chips can be + * found in the table below: + * ----------------------------------------------------- + * | CHIP | AUTO MODE SUPPORT(FIFO) | INTERFACE | + * |----------------------------------------------------| + * | max11800 | YES | SPI | + * | max11801 | YES | I2C | + * | max11802 | NO | SPI | + * | max11803 | NO | I2C | + * ------------------------------------------------------ + * + * Currently, this driver only supports max11801. + * + * Data Sheet: + * http://www.maxim-ic.com/datasheet/index.mvp/id/5943 + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +/* Register Address define */ +#define GENERNAL_STATUS_REG 0x00 +#define GENERNAL_CONF_REG 0x01 +#define MESURE_RES_CONF_REG 0x02 +#define MESURE_AVER_CONF_REG 0x03 +#define ADC_SAMPLE_TIME_CONF_REG 0x04 +#define PANEL_SETUPTIME_CONF_REG 0x05 +#define DELAY_CONVERSION_CONF_REG 0x06 +#define TOUCH_DETECT_PULLUP_CONF_REG 0x07 +#define AUTO_MODE_TIME_CONF_REG 0x08 /* only for max11800/max11801 */ +#define APERTURE_CONF_REG 0x09 /* only for max11800/max11801 */ +#define AUX_MESURE_CONF_REG 0x0a +#define OP_MODE_CONF_REG 0x0b + +/* FIFO is found only in max11800 and max11801 */ +#define FIFO_RD_CMD (0x50 << 1) +#define MAX11801_FIFO_INT (1 << 2) +#define MAX11801_FIFO_OVERFLOW (1 << 3) + +#define XY_BUFSIZE 4 +#define XY_BUF_OFFSET 4 + +#define MAX11801_MAX_X 0xfff +#define MAX11801_MAX_Y 0xfff + +#define MEASURE_TAG_OFFSET 2 +#define MEASURE_TAG_MASK (3 << MEASURE_TAG_OFFSET) +#define EVENT_TAG_OFFSET 0 +#define EVENT_TAG_MASK (3 << EVENT_TAG_OFFSET) +#define MEASURE_X_TAG (0 << MEASURE_TAG_OFFSET) +#define MEASURE_Y_TAG (1 << MEASURE_TAG_OFFSET) + +/* These are the state of touch event state machine */ +enum { + EVENT_INIT, + EVENT_MIDDLE, + EVENT_RELEASE, + EVENT_FIFO_END +}; + +struct max11801_data { + struct i2c_client *client; + struct input_dev *input_dev; +}; + +static u8 read_register(struct i2c_client *client, int addr) +{ + /* XXX: The chip ignores LSB of register address */ + return i2c_smbus_read_byte_data(client, addr << 1); +} + +static int max11801_write_reg(struct i2c_client *client, int addr, int data) +{ + /* XXX: The chip ignores LSB of register address */ + return i2c_smbus_write_byte_data(client, addr << 1, data); +} + +static irqreturn_t max11801_ts_interrupt(int irq, void *dev_id) +{ + struct max11801_data *data = dev_id; + struct i2c_client *client = data->client; + int status, i, ret; + u8 buf[XY_BUFSIZE]; + int x = -1; + int y = -1; + + status = read_register(data->client, GENERNAL_STATUS_REG); + + if (status & (MAX11801_FIFO_INT | MAX11801_FIFO_OVERFLOW)) { + status = read_register(data->client, GENERNAL_STATUS_REG); + + ret = i2c_smbus_read_i2c_block_data(client, FIFO_RD_CMD, + XY_BUFSIZE, buf); + + /* + * We should get 4 bytes buffer that contains X,Y + * and event tag + */ + if (ret < XY_BUFSIZE) + goto out; + + for (i = 0; i < XY_BUFSIZE; i += XY_BUFSIZE / 2) { + if ((buf[i + 1] & MEASURE_TAG_MASK) == MEASURE_X_TAG) + x = (buf[i] << XY_BUF_OFFSET) + + (buf[i + 1] >> XY_BUF_OFFSET); + else if ((buf[i + 1] & MEASURE_TAG_MASK) == MEASURE_Y_TAG) + y = (buf[i] << XY_BUF_OFFSET) + + (buf[i + 1] >> XY_BUF_OFFSET); + } + + if ((buf[1] & EVENT_TAG_MASK) != (buf[3] & EVENT_TAG_MASK)) + goto out; + + switch (buf[1] & EVENT_TAG_MASK) { + case EVENT_INIT: + /* fall through */ + case EVENT_MIDDLE: + input_report_abs(data->input_dev, ABS_X, x); + input_report_abs(data->input_dev, ABS_Y, y); + input_event(data->input_dev, EV_KEY, BTN_TOUCH, 1); + input_sync(data->input_dev); + break; + + case EVENT_RELEASE: + input_event(data->input_dev, EV_KEY, BTN_TOUCH, 0); + input_sync(data->input_dev); + break; + + case EVENT_FIFO_END: + break; + } + } +out: + return IRQ_HANDLED; +} + +static void __devinit max11801_ts_phy_init(struct max11801_data *data) +{ + struct i2c_client *client = data->client; + + /* Average X,Y, take 16 samples, average eight media sample */ + max11801_write_reg(client, MESURE_AVER_CONF_REG, 0xff); + /* X,Y panel setup time set to 20us */ + max11801_write_reg(client, PANEL_SETUPTIME_CONF_REG, 0x11); + /* Rough pullup time (2uS), Fine pullup time (10us) */ + max11801_write_reg(client, TOUCH_DETECT_PULLUP_CONF_REG, 0x10); + /* Auto mode init period = 5ms , scan period = 5ms*/ + max11801_write_reg(client, AUTO_MODE_TIME_CONF_REG, 0xaa); + /* Aperture X,Y set to +- 4LSB */ + max11801_write_reg(client, APERTURE_CONF_REG, 0x33); + /* Enable Power, enable Automode, enable Aperture, enable Average X,Y */ + max11801_write_reg(client, OP_MODE_CONF_REG, 0x36); +} + +static int __devinit max11801_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max11801_data *data; + struct input_dev *input_dev; + int error; + + data = kzalloc(sizeof(struct max11801_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input_dev = input_dev; + + input_dev->name = "max11801_ts"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(input_dev, ABS_X, 0, MAX11801_MAX_X, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX11801_MAX_Y, 0, 0); + input_set_drvdata(input_dev, data); + + max11801_ts_phy_init(data); + + error = request_threaded_irq(client->irq, NULL, max11801_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "max11801_ts", data); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + error = input_register_device(data->input_dev); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, data); + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return error; +} + +static __devexit int max11801_ts_remove(struct i2c_client *client) +{ + struct max11801_data *data = i2c_get_clientdata(client); + + free_irq(client->irq, data); + input_unregister_device(data->input_dev); + kfree(data); + + return 0; +} + +static const struct i2c_device_id max11801_ts_id[] = { + {"max11801", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, max11801_ts_id); + +static struct i2c_driver max11801_ts_driver = { + .driver = { + .name = "max11801_ts", + .owner = THIS_MODULE, + }, + .id_table = max11801_ts_id, + .probe = max11801_ts_probe, + .remove = __devexit_p(max11801_ts_remove), +}; + +module_i2c_driver(max11801_ts_driver); + +MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>"); +MODULE_DESCRIPTION("Touchscreen driver for MAXI MAX11801 controller"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/mc13783_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/mc13783_ts.c new file mode 100644 index 00000000..48dc5b0d --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/mc13783_ts.c @@ -0,0 +1,268 @@ +/* + * Driver for the Freescale Semiconductor MC13783 touchscreen. + * + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> + +#define MC13783_TS_NAME "mc13783-ts" + +#define DEFAULT_SAMPLE_TOLERANCE 300 + +static unsigned int sample_tolerance = DEFAULT_SAMPLE_TOLERANCE; +module_param(sample_tolerance, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(sample_tolerance, + "If the minimal and maximal value read out for one axis (out " + "of three) differ by this value (default: " + __stringify(DEFAULT_SAMPLE_TOLERANCE) ") or more, the reading " + "is supposed to be wrong and is discarded. Set to 0 to " + "disable this check."); + +struct mc13783_ts_priv { + struct input_dev *idev; + struct mc13xxx *mc13xxx; + struct delayed_work work; + struct workqueue_struct *workq; + unsigned int sample[4]; + struct mc13xxx_ts_platform_data *touch; +}; + +static irqreturn_t mc13783_ts_handler(int irq, void *data) +{ + struct mc13783_ts_priv *priv = data; + + mc13xxx_irq_ack(priv->mc13xxx, irq); + + /* + * Kick off reading coordinates. Note that if work happens already + * be queued for future execution (it rearms itself) it will not + * be rescheduled for immediate execution here. However the rearm + * delay is HZ / 50 which is acceptable. + */ + queue_delayed_work(priv->workq, &priv->work, 0); + + return IRQ_HANDLED; +} + +#define sort3(a0, a1, a2) ({ \ + if (a0 > a1) \ + swap(a0, a1); \ + if (a1 > a2) \ + swap(a1, a2); \ + if (a0 > a1) \ + swap(a0, a1); \ + }) + +static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv) +{ + struct input_dev *idev = priv->idev; + int x0, x1, x2, y0, y1, y2; + int cr0, cr1; + + /* + * the values are 10-bit wide only, but the two least significant + * bits are for future 12 bit use and reading yields 0 + */ + x0 = priv->sample[0] & 0xfff; + x1 = priv->sample[1] & 0xfff; + x2 = priv->sample[2] & 0xfff; + y0 = priv->sample[3] & 0xfff; + y1 = (priv->sample[0] >> 12) & 0xfff; + y2 = (priv->sample[1] >> 12) & 0xfff; + cr0 = (priv->sample[2] >> 12) & 0xfff; + cr1 = (priv->sample[3] >> 12) & 0xfff; + + dev_dbg(&idev->dev, + "x: (% 4d,% 4d,% 4d) y: (% 4d, % 4d,% 4d) cr: (% 4d, % 4d)\n", + x0, x1, x2, y0, y1, y2, cr0, cr1); + + sort3(x0, x1, x2); + sort3(y0, y1, y2); + + cr0 = (cr0 + cr1) / 2; + + if (!cr0 || !sample_tolerance || + (x2 - x0 < sample_tolerance && + y2 - y0 < sample_tolerance)) { + /* report the median coordinate and average pressure */ + if (cr0) { + input_report_abs(idev, ABS_X, x1); + input_report_abs(idev, ABS_Y, y1); + + dev_dbg(&idev->dev, "report (%d, %d, %d)\n", + x1, y1, 0x1000 - cr0); + queue_delayed_work(priv->workq, &priv->work, HZ / 50); + } else + dev_dbg(&idev->dev, "report release\n"); + + input_report_abs(idev, ABS_PRESSURE, + cr0 ? 0x1000 - cr0 : cr0); + input_report_key(idev, BTN_TOUCH, cr0); + input_sync(idev); + } else + dev_dbg(&idev->dev, "discard event\n"); +} + +static void mc13783_ts_work(struct work_struct *work) +{ + struct mc13783_ts_priv *priv = + container_of(work, struct mc13783_ts_priv, work.work); + unsigned int mode = MC13XXX_ADC_MODE_TS; + unsigned int channel = 12; + + if (mc13xxx_adc_do_conversion(priv->mc13xxx, + mode, channel, + priv->touch->ato, priv->touch->atox, + priv->sample) == 0) + mc13783_ts_report_sample(priv); +} + +static int mc13783_ts_open(struct input_dev *dev) +{ + struct mc13783_ts_priv *priv = input_get_drvdata(dev); + int ret; + + mc13xxx_lock(priv->mc13xxx); + + mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS); + + ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS, + mc13783_ts_handler, MC13783_TS_NAME, priv); + if (ret) + goto out; + + ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0, + MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0); + if (ret) + mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv); +out: + mc13xxx_unlock(priv->mc13xxx); + return ret; +} + +static void mc13783_ts_close(struct input_dev *dev) +{ + struct mc13783_ts_priv *priv = input_get_drvdata(dev); + + mc13xxx_lock(priv->mc13xxx); + mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0, + MC13XXX_ADC0_TSMOD_MASK, 0); + mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv); + mc13xxx_unlock(priv->mc13xxx); + + cancel_delayed_work_sync(&priv->work); +} + +static int __init mc13783_ts_probe(struct platform_device *pdev) +{ + struct mc13783_ts_priv *priv; + struct input_dev *idev; + int ret = -ENOMEM; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + idev = input_allocate_device(); + if (!priv || !idev) + goto err_free_mem; + + INIT_DELAYED_WORK(&priv->work, mc13783_ts_work); + priv->mc13xxx = dev_get_drvdata(pdev->dev.parent); + priv->idev = idev; + priv->touch = dev_get_platdata(&pdev->dev); + if (!priv->touch) { + dev_err(&pdev->dev, "missing platform data\n"); + ret = -ENODEV; + goto err_free_mem; + } + + /* + * We need separate workqueue because mc13783_adc_do_conversion + * uses keventd and thus would deadlock. + */ + priv->workq = create_singlethread_workqueue("mc13783_ts"); + if (!priv->workq) + goto err_free_mem; + + idev->name = MC13783_TS_NAME; + idev->dev.parent = &pdev->dev; + + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(idev, ABS_X, 0, 0xfff, 0, 0); + input_set_abs_params(idev, ABS_Y, 0, 0xfff, 0, 0); + input_set_abs_params(idev, ABS_PRESSURE, 0, 0xfff, 0, 0); + + idev->open = mc13783_ts_open; + idev->close = mc13783_ts_close; + + input_set_drvdata(idev, priv); + + ret = input_register_device(priv->idev); + if (ret) { + dev_err(&pdev->dev, + "register input device failed with %d\n", ret); + goto err_destroy_wq; + } + + platform_set_drvdata(pdev, priv); + return 0; + +err_destroy_wq: + destroy_workqueue(priv->workq); +err_free_mem: + input_free_device(idev); + kfree(priv); + return ret; +} + +static int __devexit mc13783_ts_remove(struct platform_device *pdev) +{ + struct mc13783_ts_priv *priv = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + destroy_workqueue(priv->workq); + input_unregister_device(priv->idev); + kfree(priv); + + return 0; +} + +static struct platform_driver mc13783_ts_driver = { + .remove = __devexit_p(mc13783_ts_remove), + .driver = { + .owner = THIS_MODULE, + .name = MC13783_TS_NAME, + }, +}; + +static int __init mc13783_ts_init(void) +{ + return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe); +} +module_init(mc13783_ts_init); + +static void __exit mc13783_ts_exit(void) +{ + platform_driver_unregister(&mc13783_ts_driver); +} +module_exit(mc13783_ts_exit); + +MODULE_DESCRIPTION("MC13783 input touchscreen driver"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" MC13783_TS_NAME); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/mcs5000_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/mcs5000_ts.c new file mode 100644 index 00000000..b5285118 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/mcs5000_ts.c @@ -0,0 +1,310 @@ +/* + * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller + * + * Copyright (C) 2009 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * Based on wm97xx-core.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/i2c/mcs.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/slab.h> + +/* Registers */ +#define MCS5000_TS_STATUS 0x00 +#define STATUS_OFFSET 0 +#define STATUS_NO (0 << STATUS_OFFSET) +#define STATUS_INIT (1 << STATUS_OFFSET) +#define STATUS_SENSING (2 << STATUS_OFFSET) +#define STATUS_COORD (3 << STATUS_OFFSET) +#define STATUS_GESTURE (4 << STATUS_OFFSET) +#define ERROR_OFFSET 4 +#define ERROR_NO (0 << ERROR_OFFSET) +#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET) +#define ERROR_INT_RESET (2 << ERROR_OFFSET) +#define ERROR_EXT_RESET (3 << ERROR_OFFSET) +#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET) +#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET) + +#define MCS5000_TS_OP_MODE 0x01 +#define RESET_OFFSET 0 +#define RESET_NO (0 << RESET_OFFSET) +#define RESET_EXT_SOFT (1 << RESET_OFFSET) +#define OP_MODE_OFFSET 1 +#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET) +#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET) +#define GESTURE_OFFSET 4 +#define GESTURE_DISABLE (0 << GESTURE_OFFSET) +#define GESTURE_ENABLE (1 << GESTURE_OFFSET) +#define PROXIMITY_OFFSET 5 +#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET) +#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET) +#define SCAN_MODE_OFFSET 6 +#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET) +#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET) +#define REPORT_RATE_OFFSET 7 +#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET) +#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET) + +#define MCS5000_TS_SENS_CTL 0x02 +#define MCS5000_TS_FILTER_CTL 0x03 +#define PRI_FILTER_OFFSET 0 +#define SEC_FILTER_OFFSET 4 + +#define MCS5000_TS_X_SIZE_UPPER 0x08 +#define MCS5000_TS_X_SIZE_LOWER 0x09 +#define MCS5000_TS_Y_SIZE_UPPER 0x0A +#define MCS5000_TS_Y_SIZE_LOWER 0x0B + +#define MCS5000_TS_INPUT_INFO 0x10 +#define INPUT_TYPE_OFFSET 0 +#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET) +#define GESTURE_CODE_OFFSET 3 +#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET) + +#define MCS5000_TS_X_POS_UPPER 0x11 +#define MCS5000_TS_X_POS_LOWER 0x12 +#define MCS5000_TS_Y_POS_UPPER 0x13 +#define MCS5000_TS_Y_POS_LOWER 0x14 +#define MCS5000_TS_Z_POS 0x15 +#define MCS5000_TS_WIDTH 0x16 +#define MCS5000_TS_GESTURE_VAL 0x17 +#define MCS5000_TS_MODULE_REV 0x20 +#define MCS5000_TS_FIRMWARE_VER 0x21 + +/* Touchscreen absolute values */ +#define MCS5000_MAX_XC 0x3ff +#define MCS5000_MAX_YC 0x3ff + +enum mcs5000_ts_read_offset { + READ_INPUT_INFO, + READ_X_POS_UPPER, + READ_X_POS_LOWER, + READ_Y_POS_UPPER, + READ_Y_POS_LOWER, + READ_BLOCK_SIZE, +}; + +/* Each client has this additional data */ +struct mcs5000_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + const struct mcs_platform_data *platform_data; +}; + +static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) +{ + struct mcs5000_ts_data *data = dev_id; + struct i2c_client *client = data->client; + u8 buffer[READ_BLOCK_SIZE]; + int err; + int x; + int y; + + err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO, + READ_BLOCK_SIZE, buffer); + if (err < 0) { + dev_err(&client->dev, "%s, err[%d]\n", __func__, err); + goto out; + } + + switch (buffer[READ_INPUT_INFO]) { + case INPUT_TYPE_NONTOUCH: + input_report_key(data->input_dev, BTN_TOUCH, 0); + input_sync(data->input_dev); + break; + + case INPUT_TYPE_SINGLE: + x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER]; + y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER]; + + input_report_key(data->input_dev, BTN_TOUCH, 1); + input_report_abs(data->input_dev, ABS_X, x); + input_report_abs(data->input_dev, ABS_Y, y); + input_sync(data->input_dev); + break; + + case INPUT_TYPE_DUAL: + /* TODO */ + break; + + case INPUT_TYPE_PALM: + /* TODO */ + break; + + case INPUT_TYPE_PROXIMITY: + /* TODO */ + break; + + default: + dev_err(&client->dev, "Unknown ts input type %d\n", + buffer[READ_INPUT_INFO]); + break; + } + + out: + return IRQ_HANDLED; +} + +static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data) +{ + const struct mcs_platform_data *platform_data = + data->platform_data; + struct i2c_client *client = data->client; + + /* Touch reset & sleep mode */ + i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, + RESET_EXT_SOFT | OP_MODE_SLEEP); + + /* Touch size */ + i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER, + platform_data->x_size >> 8); + i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER, + platform_data->x_size & 0xff); + i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER, + platform_data->y_size >> 8); + i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER, + platform_data->y_size & 0xff); + + /* Touch active mode & 80 report rate */ + i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE, + OP_MODE_ACTIVE | REPORT_RATE_80); +} + +static int __devinit mcs5000_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcs5000_ts_data *data; + struct input_dev *input_dev; + int ret; + + if (!client->dev.platform_data) + return -EINVAL; + + data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + ret = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input_dev = input_dev; + data->platform_data = client->dev.platform_data; + + input_dev->name = "MELPAS MCS-5000 Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0); + + input_set_drvdata(input_dev, data); + + if (data->platform_data->cfg_pin) + data->platform_data->cfg_pin(); + + ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data); + + if (ret < 0) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + ret = input_register_device(data->input_dev); + if (ret < 0) + goto err_free_irq; + + mcs5000_ts_phys_init(data); + i2c_set_clientdata(client, data); + + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return ret; +} + +static int __devexit mcs5000_ts_remove(struct i2c_client *client) +{ + struct mcs5000_ts_data *data = i2c_get_clientdata(client); + + free_irq(client->irq, data); + input_unregister_device(data->input_dev); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int mcs5000_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + /* Touch sleep mode */ + i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP); + + return 0; +} + +static int mcs5000_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mcs5000_ts_data *data = i2c_get_clientdata(client); + + mcs5000_ts_phys_init(data); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume); +#endif + +static const struct i2c_device_id mcs5000_ts_id[] = { + { "mcs5000_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id); + +static struct i2c_driver mcs5000_ts_driver = { + .probe = mcs5000_ts_probe, + .remove = __devexit_p(mcs5000_ts_remove), + .driver = { + .name = "mcs5000_ts", +#ifdef CONFIG_PM + .pm = &mcs5000_ts_pm, +#endif + }, + .id_table = mcs5000_ts_id, +}; + +module_i2c_driver(mcs5000_ts_driver); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/migor_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/migor_ts.c new file mode 100644 index 00000000..c038db93 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/migor_ts.c @@ -0,0 +1,249 @@ +/* + * Touch Screen driver for Renesas MIGO-R Platform + * + * Copyright (c) 2008 Magnus Damm + * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, + * Kenati Technologies Pvt Ltd. + * + * This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <asm/io.h> +#include <linux/i2c.h> +#include <linux/timer.h> + +#define EVENT_PENDOWN 1 +#define EVENT_REPEAT 2 +#define EVENT_PENUP 3 + +struct migor_ts_priv { + struct i2c_client *client; + struct input_dev *input; + int irq; +}; + +static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11, + 0x01, 0x06, 0x07, }; +static const u_int8_t migor_ts_dis_seq[17] = { }; + +static irqreturn_t migor_ts_isr(int irq, void *dev_id) +{ + struct migor_ts_priv *priv = dev_id; + unsigned short xpos, ypos; + unsigned char event; + u_int8_t buf[16]; + + /* + * The touch screen controller chip is hooked up to the CPU + * using I2C and a single interrupt line. The interrupt line + * is pulled low whenever someone taps the screen. To deassert + * the interrupt line we need to acknowledge the interrupt by + * communicating with the controller over the slow i2c bus. + * + * Since I2C bus controller may sleep we are using threaded + * IRQ here. + */ + + memset(buf, 0, sizeof(buf)); + + /* Set Index 0 */ + buf[0] = 0; + if (i2c_master_send(priv->client, buf, 1) != 1) { + dev_err(&priv->client->dev, "Unable to write i2c index\n"); + goto out; + } + + /* Now do Page Read */ + if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) { + dev_err(&priv->client->dev, "Unable to read i2c page\n"); + goto out; + } + + ypos = ((buf[9] & 0x03) << 8 | buf[8]); + xpos = ((buf[11] & 0x03) << 8 | buf[10]); + event = buf[12]; + + switch (event) { + case EVENT_PENDOWN: + case EVENT_REPEAT: + input_report_key(priv->input, BTN_TOUCH, 1); + input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/ + input_report_abs(priv->input, ABS_Y, xpos); + input_sync(priv->input); + break; + + case EVENT_PENUP: + input_report_key(priv->input, BTN_TOUCH, 0); + input_sync(priv->input); + break; + } + + out: + return IRQ_HANDLED; +} + +static int migor_ts_open(struct input_dev *dev) +{ + struct migor_ts_priv *priv = input_get_drvdata(dev); + struct i2c_client *client = priv->client; + int count; + + /* enable controller */ + count = i2c_master_send(client, migor_ts_ena_seq, + sizeof(migor_ts_ena_seq)); + if (count != sizeof(migor_ts_ena_seq)) { + dev_err(&client->dev, "Unable to enable touchscreen.\n"); + return -ENXIO; + } + + return 0; +} + +static void migor_ts_close(struct input_dev *dev) +{ + struct migor_ts_priv *priv = input_get_drvdata(dev); + struct i2c_client *client = priv->client; + + disable_irq(priv->irq); + + /* disable controller */ + i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq)); + + enable_irq(priv->irq); +} + +static int migor_ts_probe(struct i2c_client *client, + const struct i2c_device_id *idp) +{ + struct migor_ts_priv *priv; + struct input_dev *input; + int error; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + input = input_allocate_device(); + if (!priv || !input) { + dev_err(&client->dev, "failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + priv->client = client; + priv->input = input; + priv->irq = client->irq; + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + + __set_bit(BTN_TOUCH, input->keybit); + + input_set_abs_params(input, ABS_X, 95, 955, 0, 0); + input_set_abs_params(input, ABS_Y, 85, 935, 0, 0); + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + + input->open = migor_ts_open; + input->close = migor_ts_close; + + input_set_drvdata(input, priv); + + error = request_threaded_irq(priv->irq, NULL, migor_ts_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, priv); + if (error) { + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); + goto err_free_mem; + } + + error = input_register_device(input); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, priv); + device_init_wakeup(&client->dev, 1); + + return 0; + + err_free_irq: + free_irq(priv->irq, priv); + err_free_mem: + input_free_device(input); + kfree(priv); + return error; +} + +static int migor_ts_remove(struct i2c_client *client) +{ + struct migor_ts_priv *priv = i2c_get_clientdata(client); + + free_irq(priv->irq, priv); + input_unregister_device(priv->input); + kfree(priv); + + dev_set_drvdata(&client->dev, NULL); + + return 0; +} + +static int migor_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct migor_ts_priv *priv = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(priv->irq); + + return 0; +} + +static int migor_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct migor_ts_priv *priv = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(priv->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(migor_ts_pm, migor_ts_suspend, migor_ts_resume); + +static const struct i2c_device_id migor_ts_id[] = { + { "migor_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, migor_ts); + +static struct i2c_driver migor_ts_driver = { + .driver = { + .name = "migor_ts", + .pm = &migor_ts_pm, + }, + .probe = migor_ts_probe, + .remove = migor_ts_remove, + .id_table = migor_ts_id, +}; + +module_i2c_driver(migor_ts_driver); + +MODULE_DESCRIPTION("MigoR Touchscreen driver"); +MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/mk712.c b/ANDROID_3.4.5/drivers/input/touchscreen/mk712.c new file mode 100644 index 00000000..36e57dea --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/mk712.c @@ -0,0 +1,219 @@ +/* + * ICS MK712 touchscreen controller driver + * + * Copyright (c) 1999-2002 Transmeta Corporation + * Copyright (c) 2005 Rick Koch <n1gp@hotmail.com> + * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * This driver supports the ICS MicroClock MK712 TouchScreen controller, + * found in Gateway AOL Connected Touchpad computers. + * + * Documentation for ICS MK712 can be found at: + * http://www.idt.com/products/getDoc.cfm?docID=18713923 + */ + +/* + * 1999-12-18: original version, Daniel Quinlan + * 1999-12-19: added anti-jitter code, report pen-up events, fixed mk712_poll + * to use queue_empty, Nathan Laredo + * 1999-12-20: improved random point rejection, Nathan Laredo + * 2000-01-05: checked in new anti-jitter code, changed mouse protocol, fixed + * queue code, added module options, other fixes, Daniel Quinlan + * 2002-03-15: Clean up for kernel merge <alan@redhat.com> + * Fixed multi open race, fixed memory checks, fixed resource + * allocation, fixed close/powerdown bug, switched to new init + * 2005-01-18: Ported to 2.6 from 2.4.28, Rick Koch + * 2005-02-05: Rewritten for the input layer, Vojtech Pavlik + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <asm/io.h> + +MODULE_AUTHOR("Daniel Quinlan <quinlan@pathname.com>, Vojtech Pavlik <vojtech@suse.cz>"); +MODULE_DESCRIPTION("ICS MicroClock MK712 TouchScreen driver"); +MODULE_LICENSE("GPL"); + +static unsigned int mk712_io = 0x260; /* Also 0x200, 0x208, 0x300 */ +module_param_named(io, mk712_io, uint, 0); +MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller"); + +static unsigned int mk712_irq = 10; /* Also 12, 14, 15 */ +module_param_named(irq, mk712_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller"); + +/* eight 8-bit registers */ +#define MK712_STATUS 0 +#define MK712_X 2 +#define MK712_Y 4 +#define MK712_CONTROL 6 +#define MK712_RATE 7 + +/* status */ +#define MK712_STATUS_TOUCH 0x10 +#define MK712_CONVERSION_COMPLETE 0x80 + +/* control */ +#define MK712_ENABLE_INT 0x01 +#define MK712_INT_ON_CONVERSION_COMPLETE 0x02 +#define MK712_INT_ON_CHANGE_IN_TOUCH_STATUS 0x04 +#define MK712_ENABLE_PERIODIC_CONVERSIONS 0x10 +#define MK712_READ_ONE_POINT 0x20 +#define MK712_POWERUP 0x40 + +static struct input_dev *mk712_dev; +static DEFINE_SPINLOCK(mk712_lock); + +static irqreturn_t mk712_interrupt(int irq, void *dev_id) +{ + unsigned char status; + static int debounce = 1; + static unsigned short last_x; + static unsigned short last_y; + + spin_lock(&mk712_lock); + + status = inb(mk712_io + MK712_STATUS); + + if (~status & MK712_CONVERSION_COMPLETE) { + debounce = 1; + goto end; + } + + if (~status & MK712_STATUS_TOUCH) { + debounce = 1; + input_report_key(mk712_dev, BTN_TOUCH, 0); + goto end; + } + + if (debounce) { + debounce = 0; + goto end; + } + + input_report_key(mk712_dev, BTN_TOUCH, 1); + input_report_abs(mk712_dev, ABS_X, last_x); + input_report_abs(mk712_dev, ABS_Y, last_y); + + end: + last_x = inw(mk712_io + MK712_X) & 0x0fff; + last_y = inw(mk712_io + MK712_Y) & 0x0fff; + input_sync(mk712_dev); + spin_unlock(&mk712_lock); + return IRQ_HANDLED; +} + +static int mk712_open(struct input_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&mk712_lock, flags); + + outb(0, mk712_io + MK712_CONTROL); /* Reset */ + + outb(MK712_ENABLE_INT | MK712_INT_ON_CONVERSION_COMPLETE | + MK712_INT_ON_CHANGE_IN_TOUCH_STATUS | + MK712_ENABLE_PERIODIC_CONVERSIONS | + MK712_POWERUP, mk712_io + MK712_CONTROL); + + outb(10, mk712_io + MK712_RATE); /* 187 points per second */ + + spin_unlock_irqrestore(&mk712_lock, flags); + + return 0; +} + +static void mk712_close(struct input_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&mk712_lock, flags); + + outb(0, mk712_io + MK712_CONTROL); + + spin_unlock_irqrestore(&mk712_lock, flags); +} + +static int __init mk712_init(void) +{ + int err; + + if (!request_region(mk712_io, 8, "mk712")) { + printk(KERN_WARNING "mk712: unable to get IO region\n"); + return -ENODEV; + } + + outb(0, mk712_io + MK712_CONTROL); + + if ((inw(mk712_io + MK712_X) & 0xf000) || /* Sanity check */ + (inw(mk712_io + MK712_Y) & 0xf000) || + (inw(mk712_io + MK712_STATUS) & 0xf333)) { + printk(KERN_WARNING "mk712: device not present\n"); + err = -ENODEV; + goto fail1; + } + + mk712_dev = input_allocate_device(); + if (!mk712_dev) { + printk(KERN_ERR "mk712: not enough memory\n"); + err = -ENOMEM; + goto fail1; + } + + mk712_dev->name = "ICS MicroClock MK712 TouchScreen"; + mk712_dev->phys = "isa0260/input0"; + mk712_dev->id.bustype = BUS_ISA; + mk712_dev->id.vendor = 0x0005; + mk712_dev->id.product = 0x0001; + mk712_dev->id.version = 0x0100; + + mk712_dev->open = mk712_open; + mk712_dev->close = mk712_close; + + mk712_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + mk712_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0); + input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0); + + if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) { + printk(KERN_WARNING "mk712: unable to get IRQ\n"); + err = -EBUSY; + goto fail1; + } + + err = input_register_device(mk712_dev); + if (err) + goto fail2; + + return 0; + + fail2: free_irq(mk712_irq, mk712_dev); + fail1: input_free_device(mk712_dev); + release_region(mk712_io, 8); + return err; +} + +static void __exit mk712_exit(void) +{ + input_unregister_device(mk712_dev); + free_irq(mk712_irq, mk712_dev); + release_region(mk712_io, 8); +} + +module_init(mk712_init); +module_exit(mk712_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/mtouch.c b/ANDROID_3.4.5/drivers/input/touchscreen/mtouch.c new file mode 100644 index 00000000..90772284 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/mtouch.c @@ -0,0 +1,220 @@ +/* + * MicroTouch (3M) serial touchscreen driver + * + * Copyright (c) 2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2005/02/19 Dan Streetman <ddstreet@ieee.org> + * Copied elo.c and edited for MicroTouch protocol + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "MicroTouch serial touchscreen driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80 +#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40 +#define MTOUCH_FORMAT_TABLET_LENGTH 5 +#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01 +#define MTOUCH_RESPONSE_END_BYTE 0x0d + +/* todo: check specs for max length of all responses */ +#define MTOUCH_MAX_LENGTH 16 + +#define MTOUCH_MIN_XC 0 +#define MTOUCH_MAX_XC 0x3fff +#define MTOUCH_MIN_YC 0 +#define MTOUCH_MAX_YC 0x3fff + +#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1]) +#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3]) +#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct mtouch { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[MTOUCH_MAX_LENGTH]; + char phys[32]; +}; + +static void mtouch_process_format_tablet(struct mtouch *mtouch) +{ + struct input_dev *dev = mtouch->dev; + + if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { + input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data)); + input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data)); + input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data)); + input_sync(dev); + + mtouch->idx = 0; + } +} + +static void mtouch_process_response(struct mtouch *mtouch) +{ + if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) { + /* FIXME - process response */ + mtouch->idx = 0; + } else if (MTOUCH_MAX_LENGTH == mtouch->idx) { + printk(KERN_ERR "mtouch.c: too many response bytes\n"); + mtouch->idx = 0; + } +} + +static irqreturn_t mtouch_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct mtouch* mtouch = serio_get_drvdata(serio); + + mtouch->data[mtouch->idx] = data; + + if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0]) + mtouch_process_format_tablet(mtouch); + else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0]) + mtouch_process_response(mtouch); + else + printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]); + + return IRQ_HANDLED; +} + +/* + * mtouch_disconnect() is the opposite of mtouch_connect() + */ + +static void mtouch_disconnect(struct serio *serio) +{ + struct mtouch* mtouch = serio_get_drvdata(serio); + + input_get_device(mtouch->dev); + input_unregister_device(mtouch->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(mtouch->dev); + kfree(mtouch); +} + +/* + * mtouch_connect() is the routine that is called when someone adds a + * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as + * an input device. + */ + +static int mtouch_connect(struct serio *serio, struct serio_driver *drv) +{ + struct mtouch *mtouch; + struct input_dev *input_dev; + int err; + + mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + mtouch->serio = serio; + mtouch->dev = input_dev; + snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys); + + input_dev->name = "MicroTouch Serial TouchScreen"; + input_dev->phys = mtouch->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MICROTOUCH; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); + input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); + + serio_set_drvdata(serio, mtouch); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(mtouch->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(mtouch); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id mtouch_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_MICROTOUCH, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, mtouch_serio_ids); + +static struct serio_driver mtouch_drv = { + .driver = { + .name = "mtouch", + }, + .description = DRIVER_DESC, + .id_table = mtouch_serio_ids, + .interrupt = mtouch_interrupt, + .connect = mtouch_connect, + .disconnect = mtouch_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init mtouch_init(void) +{ + return serio_register_driver(&mtouch_drv); +} + +static void __exit mtouch_exit(void) +{ + serio_unregister_driver(&mtouch_drv); +} + +module_init(mtouch_init); +module_exit(mtouch_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/pcap_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/pcap_ts.c new file mode 100644 index 00000000..f57aeb80 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/pcap_ts.c @@ -0,0 +1,260 @@ +/* + * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform. + * + * Copyright (C) 2006 Harald Welte <laforge@openezx.org> + * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/pm.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_ts { + struct pcap_chip *pcap; + struct input_dev *input; + struct delayed_work work; + u16 x, y; + u16 pressure; + u8 read_state; +}; + +#define SAMPLE_DELAY 20 /* msecs */ + +#define X_AXIS_MIN 0 +#define X_AXIS_MAX 1023 +#define Y_AXIS_MAX X_AXIS_MAX +#define Y_AXIS_MIN X_AXIS_MIN +#define PRESSURE_MAX X_AXIS_MAX +#define PRESSURE_MIN X_AXIS_MIN + +static void pcap_ts_read_xy(void *data, u16 res[2]) +{ + struct pcap_ts *pcap_ts = data; + + switch (pcap_ts->read_state) { + case PCAP_ADC_TS_M_PRESSURE: + /* pressure reading is unreliable */ + if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX) + pcap_ts->pressure = res[0]; + pcap_ts->read_state = PCAP_ADC_TS_M_XY; + schedule_delayed_work(&pcap_ts->work, 0); + break; + case PCAP_ADC_TS_M_XY: + pcap_ts->y = res[0]; + pcap_ts->x = res[1]; + if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX || + pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) { + /* pen has been released */ + input_report_abs(pcap_ts->input, ABS_PRESSURE, 0); + input_report_key(pcap_ts->input, BTN_TOUCH, 0); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + } else { + /* pen is touching the screen */ + input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x); + input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y); + input_report_key(pcap_ts->input, BTN_TOUCH, 1); + input_report_abs(pcap_ts->input, ABS_PRESSURE, + pcap_ts->pressure); + + /* switch back to pressure read mode */ + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, + msecs_to_jiffies(SAMPLE_DELAY)); + } + input_sync(pcap_ts->input); + break; + default: + dev_warn(&pcap_ts->input->dev, + "pcap_ts: Warning, unhandled read_state %d\n", + pcap_ts->read_state); + break; + } +} + +static void pcap_ts_work(struct work_struct *work) +{ + struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work); + u8 ch[2]; + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) + return; + + /* start adc conversion */ + ch[0] = PCAP_ADC_CH_TS_X1; + ch[1] = PCAP_ADC_CH_TS_Y1; + pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch, + pcap_ts_read_xy, pcap_ts); +} + +static irqreturn_t pcap_ts_event_touch(int pirq, void *data) +{ + struct pcap_ts *pcap_ts = data; + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) { + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, 0); + } + return IRQ_HANDLED; +} + +static int pcap_ts_open(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + + return 0; +} + +static void pcap_ts_close(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&pcap_ts->work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); +} + +static int __devinit pcap_ts_probe(struct platform_device *pdev) +{ + struct input_dev *input_dev; + struct pcap_ts *pcap_ts; + int err = -ENOMEM; + + pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL); + if (!pcap_ts) + return err; + + pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent); + platform_set_drvdata(pdev, pcap_ts); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + pcap_ts->input = input_dev; + input_set_drvdata(input_dev, pcap_ts); + + input_dev->name = "pcap-touchscreen"; + input_dev->phys = "pcap_ts/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &pdev->dev; + input_dev->open = pcap_ts_open; + input_dev->close = pcap_ts_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, + PRESSURE_MAX, 0, 0); + + err = input_register_device(pcap_ts->input); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), + pcap_ts_event_touch, 0, "Touch Screen", pcap_ts); + if (err) + goto fail_register; + + return 0; + +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_ts); + + return err; +} + +static int __devexit pcap_ts_remove(struct platform_device *pdev) +{ + struct pcap_ts *pcap_ts = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts); + cancel_delayed_work_sync(&pcap_ts->work); + + input_unregister_device(pcap_ts->input); + + kfree(pcap_ts); + + return 0; +} + +#ifdef CONFIG_PM +static int pcap_ts_suspend(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR); + return 0; +} + +static int pcap_ts_resume(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + return 0; +} + +static const struct dev_pm_ops pcap_ts_pm_ops = { + .suspend = pcap_ts_suspend, + .resume = pcap_ts_resume, +}; +#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops) +#else +#define PCAP_TS_PM_OPS NULL +#endif + +static struct platform_driver pcap_ts_driver = { + .probe = pcap_ts_probe, + .remove = __devexit_p(pcap_ts_remove), + .driver = { + .name = "pcap-ts", + .owner = THIS_MODULE, + .pm = PCAP_TS_PM_OPS, + }, +}; +module_platform_driver(pcap_ts_driver); + +MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver"); +MODULE_AUTHOR("Daniel Ribeiro / Harald Welte"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_ts"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/penmount.c b/ANDROID_3.4.5/drivers/input/touchscreen/penmount.c new file mode 100644 index 00000000..4c012fb2 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/penmount.c @@ -0,0 +1,335 @@ +/* + * Penmount serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * Copyright (c) 2011 John Sung <penmount.touch@gmail.com> + * + * Based on ELO driver (drivers/input/touchscreen/elo.c) + * Copyright (c) 2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "PenMount serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>"); +MODULE_AUTHOR("John Sung <penmount.touch@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define PM_MAX_LENGTH 6 +#define PM_MAX_MTSLOT 16 +#define PM_3000_MTSLOT 2 +#define PM_6250_MTSLOT 12 + +/* + * Multi-touch slot + */ + +struct mt_slot { + unsigned short x, y; + bool active; /* is the touch valid? */ +}; + +/* + * Per-touchscreen data. + */ + +struct pm { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[PM_MAX_LENGTH]; + char phys[32]; + unsigned char packetsize; + unsigned char maxcontacts; + struct mt_slot slots[PM_MAX_MTSLOT]; + void (*parse_packet)(struct pm *); +}; + +/* + * pm_mtevent() sends mt events and also emulates pointer movement + */ + +static void pm_mtevent(struct pm *pm, struct input_dev *input) +{ + int i; + + for (i = 0; i < pm->maxcontacts; ++i) { + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, + pm->slots[i].active); + if (pm->slots[i].active) { + input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y); + } + } + + input_mt_report_pointer_emulation(input, true); + input_sync(input); +} + +/* + * pm_checkpacket() checks if data packet is valid + */ + +static bool pm_checkpacket(unsigned char *packet) +{ + int total = 0; + int i; + + for (i = 0; i < 5; i++) + total += packet[i]; + + return packet[5] == (unsigned char)~(total & 0xff); +} + +static void pm_parse_9000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) { + input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]); + input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]); + input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40)); + input_sync(dev); + pm->idx = 0; + } +} + +static void pm_parse_6000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + input_report_abs(dev, ABS_X, + pm->data[2] * 256 + pm->data[1]); + input_report_abs(dev, ABS_Y, + pm->data[4] * 256 + pm->data[3]); + input_report_key(dev, BTN_TOUCH, pm->data[0] & 0x40); + input_sync(dev); + } + pm->idx = 0; + } +} + +static void pm_parse_3000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + int slotnum = pm->data[0] & 0x0f; + pm->slots[slotnum].active = pm->data[0] & 0x30; + pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1]; + pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3]; + pm_mtevent(pm, dev); + } + pm->idx = 0; + } +} + +static void pm_parse_6250(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + int slotnum = pm->data[0] & 0x0f; + pm->slots[slotnum].active = pm->data[0] & 0x40; + pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1]; + pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3]; + pm_mtevent(pm, dev); + } + pm->idx = 0; + } +} + +static irqreturn_t pm_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct pm *pm = serio_get_drvdata(serio); + + pm->data[pm->idx] = data; + + pm->parse_packet(pm); + + return IRQ_HANDLED; +} + +/* + * pm_disconnect() is the opposite of pm_connect() + */ + +static void pm_disconnect(struct serio *serio) +{ + struct pm *pm = serio_get_drvdata(serio); + + serio_close(serio); + + input_unregister_device(pm->dev); + kfree(pm); + + serio_set_drvdata(serio, NULL); +} + +/* + * pm_connect() is the routine that is called when someone adds a + * new serio device that supports PenMount protocol and registers it as + * an input device. + */ + +static int pm_connect(struct serio *serio, struct serio_driver *drv) +{ + struct pm *pm; + struct input_dev *input_dev; + int max_x, max_y; + int err; + + pm = kzalloc(sizeof(struct pm), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pm || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pm->serio = serio; + pm->dev = input_dev; + snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys); + pm->maxcontacts = 1; + + input_dev->name = "PenMount Serial TouchScreen"; + input_dev->phys = pm->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_PENMOUNT; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + switch (serio->id.id) { + default: + case 0: + pm->packetsize = 5; + pm->parse_packet = pm_parse_9000; + input_dev->id.product = 0x9000; + max_x = max_y = 0x3ff; + break; + + case 1: + pm->packetsize = 6; + pm->parse_packet = pm_parse_6000; + input_dev->id.product = 0x6000; + max_x = max_y = 0x3ff; + break; + + case 2: + pm->packetsize = 6; + pm->parse_packet = pm_parse_3000; + input_dev->id.product = 0x3000; + max_x = max_y = 0x7ff; + pm->maxcontacts = PM_3000_MTSLOT; + break; + + case 3: + pm->packetsize = 6; + pm->parse_packet = pm_parse_6250; + input_dev->id.product = 0x6250; + max_x = max_y = 0x3ff; + pm->maxcontacts = PM_6250_MTSLOT; + break; + } + + input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0); + input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0); + + if (pm->maxcontacts > 1) { + input_mt_init_slots(pm->dev, pm->maxcontacts); + input_set_abs_params(pm->dev, + ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(pm->dev, + ABS_MT_POSITION_Y, 0, max_y, 0, 0); + } + + serio_set_drvdata(serio, pm); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pm->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pm); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id pm_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_PENMOUNT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, pm_serio_ids); + +static struct serio_driver pm_drv = { + .driver = { + .name = "serio-penmount", + }, + .description = DRIVER_DESC, + .id_table = pm_serio_ids, + .interrupt = pm_interrupt, + .connect = pm_connect, + .disconnect = pm_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init pm_init(void) +{ + return serio_register_driver(&pm_drv); +} + +static void __exit pm_exit(void) +{ + serio_unregister_driver(&pm_drv); +} + +module_init(pm_init); +module_exit(pm_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/pixcir_i2c_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/pixcir_i2c_ts.c new file mode 100644 index 00000000..72f6ba3a --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -0,0 +1,229 @@ +/* + * Driver for Pixcir I2C touchscreen controllers. + * + * Copyright (C) 2010-2011 Pixcir, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/pixcir_ts.h> + +struct pixcir_i2c_ts_data { + struct i2c_client *client; + struct input_dev *input; + const struct pixcir_ts_platform_data *chip; + bool exiting; +}; + +static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) +{ + struct pixcir_i2c_ts_data *tsdata = data; + u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 touch; + int ret; + + ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); + if (ret != sizeof(wrbuf)) { + dev_err(&tsdata->client->dev, + "%s: i2c_master_send failed(), ret=%d\n", + __func__, ret); + return; + } + + ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf)); + if (ret != sizeof(rdbuf)) { + dev_err(&tsdata->client->dev, + "%s: i2c_master_recv failed(), ret=%d\n", + __func__, ret); + return; + } + + touch = rdbuf[0]; + if (touch) { + u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; + u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; + u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; + u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; + + input_report_key(tsdata->input, BTN_TOUCH, 1); + input_report_abs(tsdata->input, ABS_X, posx1); + input_report_abs(tsdata->input, ABS_Y, posy1); + + input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); + input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); + input_mt_sync(tsdata->input); + + if (touch == 2) { + input_report_abs(tsdata->input, + ABS_MT_POSITION_X, posx2); + input_report_abs(tsdata->input, + ABS_MT_POSITION_Y, posy2); + input_mt_sync(tsdata->input); + } + } else { + input_report_key(tsdata->input, BTN_TOUCH, 0); + } + + input_sync(tsdata->input); +} + +static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) +{ + struct pixcir_i2c_ts_data *tsdata = dev_id; + + while (!tsdata->exiting) { + pixcir_ts_poscheck(tsdata); + + if (tsdata->chip->attb_read_val()) + break; + + msleep(20); + } + + return IRQ_HANDLED; +} + +#ifdef CONFIG_PM_SLEEP +static int pixcir_i2c_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int pixcir_i2c_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, + pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); + +static int __devinit pixcir_i2c_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct pixcir_ts_platform_data *pdata = client->dev.platform_data; + struct pixcir_i2c_ts_data *tsdata; + struct input_dev *input; + int error; + + if (!pdata) { + dev_err(&client->dev, "platform data not defined\n"); + return -EINVAL; + } + + tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL); + input = input_allocate_device(); + if (!tsdata || !input) { + dev_err(&client->dev, "Failed to allocate driver data!\n"); + error = -ENOMEM; + goto err_free_mem; + } + + tsdata->client = client; + tsdata->input = input; + tsdata->chip = pdata; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + + input_set_drvdata(input, tsdata); + + error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr, + IRQF_TRIGGER_FALLING, + client->name, tsdata); + if (error) { + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); + goto err_free_mem; + } + + error = input_register_device(input); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, tsdata); + device_init_wakeup(&client->dev, 1); + + return 0; + +err_free_irq: + free_irq(client->irq, tsdata); +err_free_mem: + input_free_device(input); + kfree(tsdata); + return error; +} + +static int __devexit pixcir_i2c_ts_remove(struct i2c_client *client) +{ + struct pixcir_i2c_ts_data *tsdata = i2c_get_clientdata(client); + + device_init_wakeup(&client->dev, 0); + + tsdata->exiting = true; + mb(); + free_irq(client->irq, tsdata); + + input_unregister_device(tsdata->input); + kfree(tsdata); + + return 0; +} + +static const struct i2c_device_id pixcir_i2c_ts_id[] = { + { "pixcir_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); + +static struct i2c_driver pixcir_i2c_ts_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "pixcir_ts", + .pm = &pixcir_dev_pm_ops, + }, + .probe = pixcir_i2c_ts_probe, + .remove = __devexit_p(pixcir_i2c_ts_remove), + .id_table = pixcir_i2c_ts_id, +}; + +module_i2c_driver(pixcir_i2c_ts_driver); + +MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>"); +MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/s3c2410_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/s3c2410_ts.c new file mode 100644 index 00000000..bf1a0640 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/s3c2410_ts.c @@ -0,0 +1,441 @@ +/* + * Samsung S3C24XX touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the term of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org> + * Copyright 2008 Ben Dooks <ben-linux@fluff.org> + * Copyright 2009 Simtec Electronics <linux@simtec.co.uk> + * + * Additional work by Herbert Pötzl <herbert@13thfloor.at> and + * Harald Welte <laforge@openmoko.org> + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <plat/adc.h> +#include <plat/regs-adc.h> +#include <plat/ts.h> + +#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) + +#define INT_DOWN (0) +#define INT_UP (1 << 8) + +#define WAIT4INT (S3C2410_ADCTSC_YM_SEN | \ + S3C2410_ADCTSC_YP_SEN | \ + S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_XY_PST(3)) + +#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \ + S3C2410_ADCTSC_YP_SEN | \ + S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_AUTO_PST | \ + S3C2410_ADCTSC_XY_PST(0)) + +#define FEAT_PEN_IRQ (1 << 0) /* HAS ADCCLRINTPNDNUP */ + +/* Per-touchscreen data. */ + +/** + * struct s3c2410ts - driver touchscreen state. + * @client: The ADC client we registered with the core driver. + * @dev: The device we are bound to. + * @input: The input device we registered with the input subsystem. + * @clock: The clock for the adc. + * @io: Pointer to the IO base. + * @xp: The accumulated X position data. + * @yp: The accumulated Y position data. + * @irq_tc: The interrupt number for pen up/down interrupt + * @count: The number of samples collected. + * @shift: The log2 of the maximum count to read in one go. + * @features: The features supported by the TSADC MOdule. + */ +struct s3c2410ts { + struct s3c_adc_client *client; + struct device *dev; + struct input_dev *input; + struct clk *clock; + void __iomem *io; + unsigned long xp; + unsigned long yp; + int irq_tc; + int count; + int shift; + int features; +}; + +static struct s3c2410ts ts; + +/** + * get_down - return the down state of the pen + * @data0: The data read from ADCDAT0 register. + * @data1: The data read from ADCDAT1 register. + * + * Return non-zero if both readings show that the pen is down. + */ +static inline bool get_down(unsigned long data0, unsigned long data1) +{ + /* returns true if both data values show stylus down */ + return (!(data0 & S3C2410_ADCDAT0_UPDOWN) && + !(data1 & S3C2410_ADCDAT0_UPDOWN)); +} + +static void touch_timer_fire(unsigned long data) +{ + unsigned long data0; + unsigned long data1; + bool down; + + data0 = readl(ts.io + S3C2410_ADCDAT0); + data1 = readl(ts.io + S3C2410_ADCDAT1); + + down = get_down(data0, data1); + + if (down) { + if (ts.count == (1 << ts.shift)) { + ts.xp >>= ts.shift; + ts.yp >>= ts.shift; + + dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n", + __func__, ts.xp, ts.yp, ts.count); + + input_report_abs(ts.input, ABS_X, ts.xp); + input_report_abs(ts.input, ABS_Y, ts.yp); + + input_report_key(ts.input, BTN_TOUCH, 1); + input_sync(ts.input); + + ts.xp = 0; + ts.yp = 0; + ts.count = 0; + } + + s3c_adc_start(ts.client, 0, 1 << ts.shift); + } else { + ts.xp = 0; + ts.yp = 0; + ts.count = 0; + + input_report_key(ts.input, BTN_TOUCH, 0); + input_sync(ts.input); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); + } +} + +static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0); + +/** + * stylus_irq - touchscreen stylus event interrupt + * @irq: The interrupt number + * @dev_id: The device ID. + * + * Called when the IRQ_TC is fired for a pen up or down event. + */ +static irqreturn_t stylus_irq(int irq, void *dev_id) +{ + unsigned long data0; + unsigned long data1; + bool down; + + data0 = readl(ts.io + S3C2410_ADCDAT0); + data1 = readl(ts.io + S3C2410_ADCDAT1); + + down = get_down(data0, data1); + + /* TODO we should never get an interrupt with down set while + * the timer is running, but maybe we ought to verify that the + * timer isn't running anyways. */ + + if (down) + s3c_adc_start(ts.client, 0, 1 << ts.shift); + else + dev_dbg(ts.dev, "%s: count=%d\n", __func__, ts.count); + + if (ts.features & FEAT_PEN_IRQ) { + /* Clear pen down/up interrupt */ + writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP); + } + + return IRQ_HANDLED; +} + +/** + * s3c24xx_ts_conversion - ADC conversion callback + * @client: The client that was registered with the ADC core. + * @data0: The reading from ADCDAT0. + * @data1: The reading from ADCDAT1. + * @left: The number of samples left. + * + * Called when a conversion has finished. + */ +static void s3c24xx_ts_conversion(struct s3c_adc_client *client, + unsigned data0, unsigned data1, + unsigned *left) +{ + dev_dbg(ts.dev, "%s: %d,%d\n", __func__, data0, data1); + + ts.xp += data0; + ts.yp += data1; + + ts.count++; + + /* From tests, it seems that it is unlikely to get a pen-up + * event during the conversion process which means we can + * ignore any pen-up events with less than the requisite + * count done. + * + * In several thousand conversions, no pen-ups where detected + * before count completed. + */ +} + +/** + * s3c24xx_ts_select - ADC selection callback. + * @client: The client that was registered with the ADC core. + * @select: The reason for select. + * + * Called when the ADC core selects (or deslects) us as a client. + */ +static void s3c24xx_ts_select(struct s3c_adc_client *client, unsigned select) +{ + if (select) { + writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, + ts.io + S3C2410_ADCTSC); + } else { + mod_timer(&touch_timer, jiffies+1); + writel(WAIT4INT | INT_UP, ts.io + S3C2410_ADCTSC); + } +} + +/** + * s3c2410ts_probe - device core probe entry point + * @pdev: The device we are being bound to. + * + * Initialise, find and allocate any resources we need to run and then + * register with the ADC and input systems. + */ +static int __devinit s3c2410ts_probe(struct platform_device *pdev) +{ + struct s3c2410_ts_mach_info *info; + struct device *dev = &pdev->dev; + struct input_dev *input_dev; + struct resource *res; + int ret = -EINVAL; + + /* Initialise input stuff */ + memset(&ts, 0, sizeof(struct s3c2410ts)); + + ts.dev = dev; + + info = pdev->dev.platform_data; + if (!info) { + dev_err(dev, "no platform data, cannot attach\n"); + return -EINVAL; + } + + dev_dbg(dev, "initialising touchscreen\n"); + + ts.clock = clk_get(dev, "adc"); + if (IS_ERR(ts.clock)) { + dev_err(dev, "cannot get adc clock source\n"); + return -ENOENT; + } + + clk_enable(ts.clock); + dev_dbg(dev, "got and enabled clocks\n"); + + ts.irq_tc = ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "no resource for interrupt\n"); + goto err_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no resource for registers\n"); + ret = -ENOENT; + goto err_clk; + } + + ts.io = ioremap(res->start, resource_size(res)); + if (ts.io == NULL) { + dev_err(dev, "cannot map registers\n"); + ret = -ENOMEM; + goto err_clk; + } + + /* inititalise the gpio */ + if (info->cfg_gpio) + info->cfg_gpio(to_platform_device(ts.dev)); + + ts.client = s3c_adc_register(pdev, s3c24xx_ts_select, + s3c24xx_ts_conversion, 1); + if (IS_ERR(ts.client)) { + dev_err(dev, "failed to register adc client\n"); + ret = PTR_ERR(ts.client); + goto err_iomap; + } + + /* Initialise registers */ + if ((info->delay & 0xffff) > 0) + writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(dev, "Unable to allocate the input device !!\n"); + ret = -ENOMEM; + goto err_iomap; + } + + ts.input = input_dev; + ts.input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0); + + ts.input->name = "S3C24XX TouchScreen"; + ts.input->id.bustype = BUS_HOST; + ts.input->id.vendor = 0xDEAD; + ts.input->id.product = 0xBEEF; + ts.input->id.version = 0x0102; + + ts.shift = info->oversampling_shift; + ts.features = platform_get_device_id(pdev)->driver_data; + + ret = request_irq(ts.irq_tc, stylus_irq, 0, + "s3c2410_ts_pen", ts.input); + if (ret) { + dev_err(dev, "cannot get TC interrupt\n"); + goto err_inputdev; + } + + dev_info(dev, "driver attached, registering input device\n"); + + /* All went ok, so register to the input system */ + ret = input_register_device(ts.input); + if (ret < 0) { + dev_err(dev, "failed to register input device\n"); + ret = -EIO; + goto err_tcirq; + } + + return 0; + + err_tcirq: + free_irq(ts.irq_tc, ts.input); + err_inputdev: + input_free_device(ts.input); + err_iomap: + iounmap(ts.io); + err_clk: + del_timer_sync(&touch_timer); + clk_put(ts.clock); + return ret; +} + +/** + * s3c2410ts_remove - device core removal entry point + * @pdev: The device we are being removed from. + * + * Free up our state ready to be removed. + */ +static int __devexit s3c2410ts_remove(struct platform_device *pdev) +{ + free_irq(ts.irq_tc, ts.input); + del_timer_sync(&touch_timer); + + clk_disable(ts.clock); + clk_put(ts.clock); + + input_unregister_device(ts.input); + iounmap(ts.io); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c2410ts_suspend(struct device *dev) +{ + writel(TSC_SLEEP, ts.io + S3C2410_ADCTSC); + disable_irq(ts.irq_tc); + clk_disable(ts.clock); + + return 0; +} + +static int s3c2410ts_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c2410_ts_mach_info *info = pdev->dev.platform_data; + + clk_enable(ts.clock); + enable_irq(ts.irq_tc); + + /* Initialise registers */ + if ((info->delay & 0xffff) > 0) + writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); + + return 0; +} + +static struct dev_pm_ops s3c_ts_pmops = { + .suspend = s3c2410ts_suspend, + .resume = s3c2410ts_resume, +}; +#endif + +static struct platform_device_id s3cts_driver_ids[] = { + { "s3c2410-ts", 0 }, + { "s3c2440-ts", 0 }, + { "s3c64xx-ts", FEAT_PEN_IRQ }, + { } +}; +MODULE_DEVICE_TABLE(platform, s3cts_driver_ids); + +static struct platform_driver s3c_ts_driver = { + .driver = { + .name = "samsung-ts", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &s3c_ts_pmops, +#endif + }, + .id_table = s3cts_driver_ids, + .probe = s3c2410ts_probe, + .remove = __devexit_p(s3c2410ts_remove), +}; +module_platform_driver(s3c_ts_driver); + +MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, " + "Ben Dooks <ben@simtec.co.uk>, " + "Simtec Electronics <linux@simtec.co.uk>"); +MODULE_DESCRIPTION("S3C24XX Touchscreen driver"); +MODULE_LICENSE("GPL v2"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/st1232.c b/ANDROID_3.4.5/drivers/input/touchscreen/st1232.c new file mode 100644 index 00000000..cbbf71b2 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/st1232.c @@ -0,0 +1,275 @@ +/* + * ST1232 Touchscreen Controller Driver + * + * Copyright (C) 2010 Renesas Solutions Corp. + * Tony SIM <chinyeow.sim.xt@renesas.com> + * + * Using code from: + * - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pm_qos.h> +#include <linux/slab.h> +#include <linux/types.h> + +#define ST1232_TS_NAME "st1232-ts" + +#define MIN_X 0x00 +#define MIN_Y 0x00 +#define MAX_X 0x31f /* (800 - 1) */ +#define MAX_Y 0x1df /* (480 - 1) */ +#define MAX_AREA 0xff +#define MAX_FINGERS 2 + +struct st1232_ts_finger { + u16 x; + u16 y; + u8 t; + bool is_valid; +}; + +struct st1232_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct st1232_ts_finger finger[MAX_FINGERS]; + struct dev_pm_qos_request low_latency_req; +}; + +static int st1232_ts_read_data(struct st1232_ts_data *ts) +{ + struct st1232_ts_finger *finger = ts->finger; + struct i2c_client *client = ts->client; + struct i2c_msg msg[2]; + int error; + u8 start_reg; + u8 buf[10]; + + /* read touchscreen data from ST1232 */ + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = &start_reg; + start_reg = 0x10; + + msg[1].addr = ts->client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = sizeof(buf); + msg[1].buf = buf; + + error = i2c_transfer(client->adapter, msg, 2); + if (error < 0) + return error; + + /* get "valid" bits */ + finger[0].is_valid = buf[2] >> 7; + finger[1].is_valid = buf[5] >> 7; + + /* get xy coordinate */ + if (finger[0].is_valid) { + finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3]; + finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4]; + finger[0].t = buf[8]; + } + + if (finger[1].is_valid) { + finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6]; + finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7]; + finger[1].t = buf[9]; + } + + return 0; +} + +static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) +{ + struct st1232_ts_data *ts = dev_id; + struct st1232_ts_finger *finger = ts->finger; + struct input_dev *input_dev = ts->input_dev; + int count = 0; + int i, ret; + + ret = st1232_ts_read_data(ts); + if (ret < 0) + goto end; + + /* multi touch protocol */ + for (i = 0; i < MAX_FINGERS; i++) { + if (!finger[i].is_valid) + continue; + + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t); + input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y); + input_mt_sync(input_dev); + count++; + } + + /* SYN_MT_REPORT only if no contact */ + if (!count) { + input_mt_sync(input_dev); + if (ts->low_latency_req.dev) { + dev_pm_qos_remove_request(&ts->low_latency_req); + ts->low_latency_req.dev = NULL; + } + } else if (!ts->low_latency_req.dev) { + /* First contact, request 100 us latency. */ + dev_pm_qos_add_ancestor_request(&ts->client->dev, + &ts->low_latency_req, 100); + } + + /* SYN_REPORT */ + input_sync(input_dev); + +end: + return IRQ_HANDLED; +} + +static int __devinit st1232_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct st1232_ts_data *ts; + struct input_dev *input_dev; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "need I2C_FUNC_I2C\n"); + return -EIO; + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + return -EINVAL; + } + + + ts = kzalloc(sizeof(struct st1232_ts_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + ts->client = client; + ts->input_dev = input_dev; + + input_dev->name = "st1232-touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_SYN, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_ABS, input_dev->evbit); + + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0); + + error = request_threaded_irq(client->irq, NULL, st1232_ts_irq_handler, + IRQF_ONESHOT, client->name, ts); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + error = input_register_device(ts->input_dev); + if (error) { + dev_err(&client->dev, "Unable to register %s input device\n", + input_dev->name); + goto err_free_irq; + } + + i2c_set_clientdata(client, ts); + device_init_wakeup(&client->dev, 1); + + return 0; + +err_free_irq: + free_irq(client->irq, ts); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + return error; +} + +static int __devexit st1232_ts_remove(struct i2c_client *client) +{ + struct st1232_ts_data *ts = i2c_get_clientdata(client); + + device_init_wakeup(&client->dev, 0); + free_irq(client->irq, ts); + input_unregister_device(ts->input_dev); + kfree(ts); + + return 0; +} + +#ifdef CONFIG_PM +static int st1232_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + else + disable_irq(client->irq); + + return 0; +} + +static int st1232_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + else + enable_irq(client->irq); + + return 0; +} + +static const struct dev_pm_ops st1232_ts_pm_ops = { + .suspend = st1232_ts_suspend, + .resume = st1232_ts_resume, +}; +#endif + +static const struct i2c_device_id st1232_ts_id[] = { + { ST1232_TS_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, st1232_ts_id); + +static struct i2c_driver st1232_ts_driver = { + .probe = st1232_ts_probe, + .remove = __devexit_p(st1232_ts_remove), + .id_table = st1232_ts_id, + .driver = { + .name = ST1232_TS_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &st1232_ts_pm_ops, +#endif + }, +}; + +module_i2c_driver(st1232_ts_driver); + +MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>"); +MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/stmpe-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/stmpe-ts.c new file mode 100644 index 00000000..692b6857 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/stmpe-ts.c @@ -0,0 +1,387 @@ +/* STMicroelectronics STMPE811 Touchscreen Driver + * + * (C) 2010 Luotao Fu <l.fu@pengutronix.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> + +#include <linux/mfd/stmpe.h> + +/* Register layouts and functionalities are identical on all stmpexxx variants + * with touchscreen controller + */ +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_TSC_CTRL 0x40 +#define STMPE_REG_TSC_CFG 0x41 +#define STMPE_REG_FIFO_TH 0x4A +#define STMPE_REG_FIFO_STA 0x4B +#define STMPE_REG_FIFO_SIZE 0x4C +#define STMPE_REG_TSC_DATA_XYZ 0x52 +#define STMPE_REG_TSC_FRACTION_Z 0x56 +#define STMPE_REG_TSC_I_DRIVE 0x58 + +#define OP_MOD_XYZ 0 + +#define STMPE_TSC_CTRL_TSC_EN (1<<0) + +#define STMPE_FIFO_STA_RESET (1<<0) + +#define STMPE_IRQ_TOUCH_DET 0 + +#define SAMPLE_TIME(x) ((x & 0xf) << 4) +#define MOD_12B(x) ((x & 0x1) << 3) +#define REF_SEL(x) ((x & 0x1) << 1) +#define ADC_FREQ(x) (x & 0x3) +#define AVE_CTRL(x) ((x & 0x3) << 6) +#define DET_DELAY(x) ((x & 0x7) << 3) +#define SETTLING(x) (x & 0x7) +#define FRACTION_Z(x) (x & 0x7) +#define I_DRIVE(x) (x & 0x1) +#define OP_MODE(x) ((x & 0x7) << 1) + +#define STMPE_TS_NAME "stmpe-ts" +#define XY_MASK 0xfff + +struct stmpe_touch { + struct stmpe *stmpe; + struct input_dev *idev; + struct delayed_work work; + struct device *dev; + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; + u8 i_drive; +}; + +static int __stmpe_reset_fifo(struct stmpe *stmpe) +{ + int ret; + + ret = stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA, + STMPE_FIFO_STA_RESET, STMPE_FIFO_STA_RESET); + if (ret) + return ret; + + return stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA, + STMPE_FIFO_STA_RESET, 0); +} + +static void stmpe_work(struct work_struct *work) +{ + int int_sta; + u32 timeout = 40; + + struct stmpe_touch *ts = + container_of(work, struct stmpe_touch, work.work); + + int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA); + + /* + * touch_det sometimes get desasserted or just get stuck. This appears + * to be a silicon bug, We still have to clearify this with the + * manufacture. As a workaround We release the key anyway if the + * touch_det keeps coming in after 4ms, while the FIFO contains no value + * during the whole time. + */ + while ((int_sta & (1 << STMPE_IRQ_TOUCH_DET)) && (timeout > 0)) { + timeout--; + int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA); + udelay(100); + } + + /* reset the FIFO before we report release event */ + __stmpe_reset_fifo(ts->stmpe); + + input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_sync(ts->idev); +} + +static irqreturn_t stmpe_ts_handler(int irq, void *data) +{ + u8 data_set[4]; + int x, y, z; + struct stmpe_touch *ts = data; + + /* + * Cancel scheduled polling for release if we have new value + * available. Wait if the polling is already running. + */ + cancel_delayed_work_sync(&ts->work); + + /* + * The FIFO sometimes just crashes and stops generating interrupts. This + * appears to be a silicon bug. We still have to clearify this with + * the manufacture. As a workaround we disable the TSC while we are + * collecting data and flush the FIFO after reading + */ + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, 0); + + stmpe_block_read(ts->stmpe, STMPE_REG_TSC_DATA_XYZ, 4, data_set); + + x = (data_set[0] << 4) | (data_set[1] >> 4); + y = ((data_set[1] & 0xf) << 8) | data_set[2]; + z = data_set[3]; + + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, z); + input_sync(ts->idev); + + /* flush the FIFO after we have read out our values. */ + __stmpe_reset_fifo(ts->stmpe); + + /* reenable the tsc */ + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); + + /* start polling for touch_det to detect release */ + schedule_delayed_work(&ts->work, HZ / 50); + + return IRQ_HANDLED; +} + +static int __devinit stmpe_init_hw(struct stmpe_touch *ts) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask; + struct stmpe *stmpe = ts->stmpe; + struct device *dev = ts->dev; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC); + if (ret) { + dev_err(dev, "Could not enable clock for ADC and TS\n"); + return ret; + } + + adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) | + REF_SEL(ts->ref_sel); + adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, + ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq)); + if (ret) { + dev_err(dev, "Could not setup ADC\n"); + return ret; + } + + tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) | + SETTLING(ts->settling); + tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff); + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z, + FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z)); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE, + I_DRIVE(0xff), I_DRIVE(ts->i_drive)); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + /* set FIFO to 1 for single point reading */ + ret = stmpe_reg_write(stmpe, STMPE_REG_FIFO_TH, 1); + if (ret) { + dev_err(dev, "Could not set FIFO\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL, + OP_MODE(0xff), OP_MODE(OP_MOD_XYZ)); + if (ret) { + dev_err(dev, "Could not set mode\n"); + return ret; + } + + return 0; +} + +static int stmpe_ts_open(struct input_dev *dev) +{ + struct stmpe_touch *ts = input_get_drvdata(dev); + int ret = 0; + + ret = __stmpe_reset_fifo(ts->stmpe); + if (ret) + return ret; + + return stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); +} + +static void stmpe_ts_close(struct input_dev *dev) +{ + struct stmpe_touch *ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&ts->work); + + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, 0); +} + +static int __devinit stmpe_input_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_platform_data *pdata = stmpe->pdata; + struct stmpe_touch *ts; + struct input_dev *idev; + struct stmpe_ts_platform_data *ts_pdata = NULL; + int ret; + int ts_irq; + + ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); + if (ts_irq < 0) + return ts_irq; + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (!ts) { + ret = -ENOMEM; + goto err_out; + } + + idev = input_allocate_device(); + if (!idev) { + ret = -ENOMEM; + goto err_free_ts; + } + + platform_set_drvdata(pdev, ts); + ts->stmpe = stmpe; + ts->idev = idev; + ts->dev = &pdev->dev; + + if (pdata) + ts_pdata = pdata->ts; + + if (ts_pdata) { + ts->sample_time = ts_pdata->sample_time; + ts->mod_12b = ts_pdata->mod_12b; + ts->ref_sel = ts_pdata->ref_sel; + ts->adc_freq = ts_pdata->adc_freq; + ts->ave_ctrl = ts_pdata->ave_ctrl; + ts->touch_det_delay = ts_pdata->touch_det_delay; + ts->settling = ts_pdata->settling; + ts->fraction_z = ts_pdata->fraction_z; + ts->i_drive = ts_pdata->i_drive; + } + + INIT_DELAYED_WORK(&ts->work, stmpe_work); + + ret = request_threaded_irq(ts_irq, NULL, stmpe_ts_handler, + IRQF_ONESHOT, STMPE_TS_NAME, ts); + if (ret) { + dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq); + goto err_free_input; + } + + ret = stmpe_init_hw(ts); + if (ret) + goto err_free_irq; + + idev->name = STMPE_TS_NAME; + idev->id.bustype = BUS_I2C; + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + idev->open = stmpe_ts_open; + idev->close = stmpe_ts_close; + + input_set_drvdata(idev, ts); + + input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0); + + ret = input_register_device(idev); + if (ret) { + dev_err(&pdev->dev, "Could not register input device\n"); + goto err_free_irq; + } + + return ret; + +err_free_irq: + free_irq(ts_irq, ts); +err_free_input: + input_free_device(idev); + platform_set_drvdata(pdev, NULL); +err_free_ts: + kfree(ts); +err_out: + return ret; +} + +static int __devexit stmpe_ts_remove(struct platform_device *pdev) +{ + struct stmpe_touch *ts = platform_get_drvdata(pdev); + unsigned int ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); + + stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN); + + free_irq(ts_irq, ts); + + platform_set_drvdata(pdev, NULL); + + input_unregister_device(ts->idev); + + kfree(ts); + + return 0; +} + +static struct platform_driver stmpe_ts_driver = { + .driver = { + .name = STMPE_TS_NAME, + .owner = THIS_MODULE, + }, + .probe = stmpe_input_probe, + .remove = __devexit_p(stmpe_ts_remove), +}; +module_platform_driver(stmpe_ts_driver); + +MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>"); +MODULE_DESCRIPTION("STMPEXXX touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" STMPE_TS_NAME); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/synaptics_i2c_rmi.c b/ANDROID_3.4.5/drivers/input/touchscreen/synaptics_i2c_rmi.c new file mode 100644 index 00000000..5729602c --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/synaptics_i2c_rmi.c @@ -0,0 +1,675 @@ +/* drivers/input/keyboard/synaptics_i2c_rmi.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/earlysuspend.h> +#include <linux/hrtimer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/synaptics_i2c_rmi.h> + +static struct workqueue_struct *synaptics_wq; + +struct synaptics_ts_data { + uint16_t addr; + struct i2c_client *client; + struct input_dev *input_dev; + int use_irq; + bool has_relative_report; + struct hrtimer timer; + struct work_struct work; + uint16_t max[2]; + int snap_state[2][2]; + int snap_down_on[2]; + int snap_down_off[2]; + int snap_up_on[2]; + int snap_up_off[2]; + int snap_down[2]; + int snap_up[2]; + uint32_t flags; + int reported_finger_count; + int8_t sensitivity_adjust; + int (*power)(int on); + struct early_suspend early_suspend; +}; + +#ifdef CONFIG_HAS_EARLYSUSPEND +static void synaptics_ts_early_suspend(struct early_suspend *h); +static void synaptics_ts_late_resume(struct early_suspend *h); +#endif + +static int synaptics_init_panel(struct synaptics_ts_data *ts) +{ + int ret; + + ret = i2c_smbus_write_byte_data(ts->client, 0xff, 0x10); /* page select = 0x10 */ + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_write_byte_data failed for page select\n"); + goto err_page_select_failed; + } + ret = i2c_smbus_write_byte_data(ts->client, 0x41, 0x04); /* Set "No Clip Z" */ + if (ret < 0) + printk(KERN_ERR "i2c_smbus_write_byte_data failed for No Clip Z\n"); + + ret = i2c_smbus_write_byte_data(ts->client, 0x44, + ts->sensitivity_adjust); + if (ret < 0) + pr_err("synaptics_ts: failed to set Sensitivity Adjust\n"); + +err_page_select_failed: + ret = i2c_smbus_write_byte_data(ts->client, 0xff, 0x04); /* page select = 0x04 */ + if (ret < 0) + printk(KERN_ERR "i2c_smbus_write_byte_data failed for page select\n"); + ret = i2c_smbus_write_byte_data(ts->client, 0xf0, 0x81); /* normal operation, 80 reports per second */ + if (ret < 0) + printk(KERN_ERR "synaptics_ts_resume: i2c_smbus_write_byte_data failed\n"); + return ret; +} + +static void synaptics_ts_work_func(struct work_struct *work) +{ + int i; + int ret; + int bad_data = 0; + struct i2c_msg msg[2]; + uint8_t start_reg; + uint8_t buf[15]; + struct synaptics_ts_data *ts = container_of(work, struct synaptics_ts_data, work); + int buf_len = ts->has_relative_report ? 15 : 13; + + msg[0].addr = ts->client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = &start_reg; + start_reg = 0x00; + msg[1].addr = ts->client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = buf_len; + msg[1].buf = buf; + + /* printk("synaptics_ts_work_func\n"); */ + for (i = 0; i < ((ts->use_irq && !bad_data) ? 1 : 10); i++) { + ret = i2c_transfer(ts->client->adapter, msg, 2); + if (ret < 0) { + printk(KERN_ERR "synaptics_ts_work_func: i2c_transfer failed\n"); + bad_data = 1; + } else { + /* printk("synaptics_ts_work_func: %x %x %x %x %x %x" */ + /* " %x %x %x %x %x %x %x %x %x, ret %d\n", */ + /* buf[0], buf[1], buf[2], buf[3], */ + /* buf[4], buf[5], buf[6], buf[7], */ + /* buf[8], buf[9], buf[10], buf[11], */ + /* buf[12], buf[13], buf[14], ret); */ + if ((buf[buf_len - 1] & 0xc0) != 0x40) { + printk(KERN_WARNING "synaptics_ts_work_func:" + " bad read %x %x %x %x %x %x %x %x %x" + " %x %x %x %x %x %x, ret %d\n", + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[10], buf[11], + buf[12], buf[13], buf[14], ret); + if (bad_data) + synaptics_init_panel(ts); + bad_data = 1; + continue; + } + bad_data = 0; + if ((buf[buf_len - 1] & 1) == 0) { + /* printk("read %d coordinates\n", i); */ + break; + } else { + int pos[2][2]; + int f, a; + int base; + /* int x = buf[3] | (uint16_t)(buf[2] & 0x1f) << 8; */ + /* int y = buf[5] | (uint16_t)(buf[4] & 0x1f) << 8; */ + int z = buf[1]; + int w = buf[0] >> 4; + int finger = buf[0] & 7; + + /* int x2 = buf[3+6] | (uint16_t)(buf[2+6] & 0x1f) << 8; */ + /* int y2 = buf[5+6] | (uint16_t)(buf[4+6] & 0x1f) << 8; */ + /* int z2 = buf[1+6]; */ + /* int w2 = buf[0+6] >> 4; */ + /* int finger2 = buf[0+6] & 7; */ + + /* int dx = (int8_t)buf[12]; */ + /* int dy = (int8_t)buf[13]; */ + int finger2_pressed; + + /* printk("x %4d, y %4d, z %3d, w %2d, F %d, 2nd: x %4d, y %4d, z %3d, w %2d, F %d, dx %4d, dy %4d\n", */ + /* x, y, z, w, finger, */ + /* x2, y2, z2, w2, finger2, */ + /* dx, dy); */ + + base = 2; + for (f = 0; f < 2; f++) { + uint32_t flip_flag = SYNAPTICS_FLIP_X; + for (a = 0; a < 2; a++) { + int p = buf[base + 1]; + p |= (uint16_t)(buf[base] & 0x1f) << 8; + if (ts->flags & flip_flag) + p = ts->max[a] - p; + if (ts->flags & SYNAPTICS_SNAP_TO_INACTIVE_EDGE) { + if (ts->snap_state[f][a]) { + if (p <= ts->snap_down_off[a]) + p = ts->snap_down[a]; + else if (p >= ts->snap_up_off[a]) + p = ts->snap_up[a]; + else + ts->snap_state[f][a] = 0; + } else { + if (p <= ts->snap_down_on[a]) { + p = ts->snap_down[a]; + ts->snap_state[f][a] = 1; + } else if (p >= ts->snap_up_on[a]) { + p = ts->snap_up[a]; + ts->snap_state[f][a] = 1; + } + } + } + pos[f][a] = p; + base += 2; + flip_flag <<= 1; + } + base += 2; + if (ts->flags & SYNAPTICS_SWAP_XY) + swap(pos[f][0], pos[f][1]); + } + if (z) { + input_report_abs(ts->input_dev, ABS_X, pos[0][0]); + input_report_abs(ts->input_dev, ABS_Y, pos[0][1]); + } + input_report_abs(ts->input_dev, ABS_PRESSURE, z); + input_report_abs(ts->input_dev, ABS_TOOL_WIDTH, w); + input_report_key(ts->input_dev, BTN_TOUCH, finger); + finger2_pressed = finger > 1 && finger != 7; + input_report_key(ts->input_dev, BTN_2, finger2_pressed); + if (finger2_pressed) { + input_report_abs(ts->input_dev, ABS_HAT0X, pos[1][0]); + input_report_abs(ts->input_dev, ABS_HAT0Y, pos[1][1]); + } + + if (!finger) + z = 0; + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, z); + input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, w); + input_report_abs(ts->input_dev, ABS_MT_POSITION_X, pos[0][0]); + input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, pos[0][1]); + input_mt_sync(ts->input_dev); + if (finger2_pressed) { + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, z); + input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, w); + input_report_abs(ts->input_dev, ABS_MT_POSITION_X, pos[1][0]); + input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, pos[1][1]); + input_mt_sync(ts->input_dev); + } else if (ts->reported_finger_count > 1) { + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0); + input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0); + input_mt_sync(ts->input_dev); + } + ts->reported_finger_count = finger; + input_sync(ts->input_dev); + } + } + } + if (ts->use_irq) + enable_irq(ts->client->irq); +} + +static enum hrtimer_restart synaptics_ts_timer_func(struct hrtimer *timer) +{ + struct synaptics_ts_data *ts = container_of(timer, struct synaptics_ts_data, timer); + /* printk("synaptics_ts_timer_func\n"); */ + + queue_work(synaptics_wq, &ts->work); + + hrtimer_start(&ts->timer, ktime_set(0, 12500000), HRTIMER_MODE_REL); + return HRTIMER_NORESTART; +} + +static irqreturn_t synaptics_ts_irq_handler(int irq, void *dev_id) +{ + struct synaptics_ts_data *ts = dev_id; + + /* printk("synaptics_ts_irq_handler\n"); */ + disable_irq_nosync(ts->client->irq); + queue_work(synaptics_wq, &ts->work); + return IRQ_HANDLED; +} + +static int synaptics_ts_probe( + struct i2c_client *client, const struct i2c_device_id *id) +{ + struct synaptics_ts_data *ts; + uint8_t buf0[4]; + uint8_t buf1[8]; + struct i2c_msg msg[2]; + int ret = 0; + uint16_t max_x, max_y; + int fuzz_x, fuzz_y, fuzz_p, fuzz_w; + struct synaptics_i2c_rmi_platform_data *pdata; + unsigned long irqflags; + int inactive_area_left; + int inactive_area_right; + int inactive_area_top; + int inactive_area_bottom; + int snap_left_on; + int snap_left_off; + int snap_right_on; + int snap_right_off; + int snap_top_on; + int snap_top_off; + int snap_bottom_on; + int snap_bottom_off; + uint32_t panel_version; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + printk(KERN_ERR "synaptics_ts_probe: need I2C_FUNC_I2C\n"); + ret = -ENODEV; + goto err_check_functionality_failed; + } + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (ts == NULL) { + ret = -ENOMEM; + goto err_alloc_data_failed; + } + INIT_WORK(&ts->work, synaptics_ts_work_func); + ts->client = client; + i2c_set_clientdata(client, ts); + pdata = client->dev.platform_data; + if (pdata) + ts->power = pdata->power; + if (ts->power) { + ret = ts->power(1); + if (ret < 0) { + printk(KERN_ERR "synaptics_ts_probe power on failed\n"); + goto err_power_failed; + } + } + + ret = i2c_smbus_write_byte_data(ts->client, 0xf4, 0x01); /* device command = reset */ + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_write_byte_data failed\n"); + /* fail? */ + } + { + int retry = 10; + while (retry-- > 0) { + ret = i2c_smbus_read_byte_data(ts->client, 0xe4); + if (ret >= 0) + break; + msleep(100); + } + } + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_byte_data failed\n"); + goto err_detect_failed; + } + printk(KERN_INFO "synaptics_ts_probe: Product Major Version %x\n", ret); + panel_version = ret << 8; + ret = i2c_smbus_read_byte_data(ts->client, 0xe5); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_byte_data failed\n"); + goto err_detect_failed; + } + printk(KERN_INFO "synaptics_ts_probe: Product Minor Version %x\n", ret); + panel_version |= ret; + + ret = i2c_smbus_read_byte_data(ts->client, 0xe3); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_byte_data failed\n"); + goto err_detect_failed; + } + printk(KERN_INFO "synaptics_ts_probe: product property %x\n", ret); + + if (pdata) { + while (pdata->version > panel_version) + pdata++; + ts->flags = pdata->flags; + ts->sensitivity_adjust = pdata->sensitivity_adjust; + irqflags = pdata->irqflags; + inactive_area_left = pdata->inactive_left; + inactive_area_right = pdata->inactive_right; + inactive_area_top = pdata->inactive_top; + inactive_area_bottom = pdata->inactive_bottom; + snap_left_on = pdata->snap_left_on; + snap_left_off = pdata->snap_left_off; + snap_right_on = pdata->snap_right_on; + snap_right_off = pdata->snap_right_off; + snap_top_on = pdata->snap_top_on; + snap_top_off = pdata->snap_top_off; + snap_bottom_on = pdata->snap_bottom_on; + snap_bottom_off = pdata->snap_bottom_off; + fuzz_x = pdata->fuzz_x; + fuzz_y = pdata->fuzz_y; + fuzz_p = pdata->fuzz_p; + fuzz_w = pdata->fuzz_w; + } else { + irqflags = 0; + inactive_area_left = 0; + inactive_area_right = 0; + inactive_area_top = 0; + inactive_area_bottom = 0; + snap_left_on = 0; + snap_left_off = 0; + snap_right_on = 0; + snap_right_off = 0; + snap_top_on = 0; + snap_top_off = 0; + snap_bottom_on = 0; + snap_bottom_off = 0; + fuzz_x = 0; + fuzz_y = 0; + fuzz_p = 0; + fuzz_w = 0; + } + + ret = i2c_smbus_read_byte_data(ts->client, 0xf0); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_byte_data failed\n"); + goto err_detect_failed; + } + printk(KERN_INFO "synaptics_ts_probe: device control %x\n", ret); + + ret = i2c_smbus_read_byte_data(ts->client, 0xf1); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_byte_data failed\n"); + goto err_detect_failed; + } + printk(KERN_INFO "synaptics_ts_probe: interrupt enable %x\n", ret); + + ret = i2c_smbus_write_byte_data(ts->client, 0xf1, 0); /* disable interrupt */ + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_write_byte_data failed\n"); + goto err_detect_failed; + } + + msg[0].addr = ts->client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = buf0; + buf0[0] = 0xe0; + msg[1].addr = ts->client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 8; + msg[1].buf = buf1; + ret = i2c_transfer(ts->client->adapter, msg, 2); + if (ret < 0) { + printk(KERN_ERR "i2c_transfer failed\n"); + goto err_detect_failed; + } + printk(KERN_INFO "synaptics_ts_probe: 0xe0: %x %x %x %x %x %x %x %x\n", + buf1[0], buf1[1], buf1[2], buf1[3], + buf1[4], buf1[5], buf1[6], buf1[7]); + + ret = i2c_smbus_write_byte_data(ts->client, 0xff, 0x10); /* page select = 0x10 */ + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_write_byte_data failed for page select\n"); + goto err_detect_failed; + } + ret = i2c_smbus_read_word_data(ts->client, 0x02); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_word_data failed\n"); + goto err_detect_failed; + } + ts->has_relative_report = !(ret & 0x100); + printk(KERN_INFO "synaptics_ts_probe: Sensor properties %x\n", ret); + ret = i2c_smbus_read_word_data(ts->client, 0x04); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_word_data failed\n"); + goto err_detect_failed; + } + ts->max[0] = max_x = (ret >> 8 & 0xff) | ((ret & 0x1f) << 8); + ret = i2c_smbus_read_word_data(ts->client, 0x06); + if (ret < 0) { + printk(KERN_ERR "i2c_smbus_read_word_data failed\n"); + goto err_detect_failed; + } + ts->max[1] = max_y = (ret >> 8 & 0xff) | ((ret & 0x1f) << 8); + if (ts->flags & SYNAPTICS_SWAP_XY) + swap(max_x, max_y); + + ret = synaptics_init_panel(ts); /* will also switch back to page 0x04 */ + if (ret < 0) { + printk(KERN_ERR "synaptics_init_panel failed\n"); + goto err_detect_failed; + } + + ts->input_dev = input_allocate_device(); + if (ts->input_dev == NULL) { + ret = -ENOMEM; + printk(KERN_ERR "synaptics_ts_probe: Failed to allocate input device\n"); + goto err_input_dev_alloc_failed; + } + ts->input_dev->name = "synaptics-rmi-touchscreen"; + set_bit(EV_SYN, ts->input_dev->evbit); + set_bit(EV_KEY, ts->input_dev->evbit); + set_bit(BTN_TOUCH, ts->input_dev->keybit); + set_bit(BTN_2, ts->input_dev->keybit); + set_bit(EV_ABS, ts->input_dev->evbit); + inactive_area_left = inactive_area_left * max_x / 0x10000; + inactive_area_right = inactive_area_right * max_x / 0x10000; + inactive_area_top = inactive_area_top * max_y / 0x10000; + inactive_area_bottom = inactive_area_bottom * max_y / 0x10000; + snap_left_on = snap_left_on * max_x / 0x10000; + snap_left_off = snap_left_off * max_x / 0x10000; + snap_right_on = snap_right_on * max_x / 0x10000; + snap_right_off = snap_right_off * max_x / 0x10000; + snap_top_on = snap_top_on * max_y / 0x10000; + snap_top_off = snap_top_off * max_y / 0x10000; + snap_bottom_on = snap_bottom_on * max_y / 0x10000; + snap_bottom_off = snap_bottom_off * max_y / 0x10000; + fuzz_x = fuzz_x * max_x / 0x10000; + fuzz_y = fuzz_y * max_y / 0x10000; + ts->snap_down[!!(ts->flags & SYNAPTICS_SWAP_XY)] = -inactive_area_left; + ts->snap_up[!!(ts->flags & SYNAPTICS_SWAP_XY)] = max_x + inactive_area_right; + ts->snap_down[!(ts->flags & SYNAPTICS_SWAP_XY)] = -inactive_area_top; + ts->snap_up[!(ts->flags & SYNAPTICS_SWAP_XY)] = max_y + inactive_area_bottom; + ts->snap_down_on[!!(ts->flags & SYNAPTICS_SWAP_XY)] = snap_left_on; + ts->snap_down_off[!!(ts->flags & SYNAPTICS_SWAP_XY)] = snap_left_off; + ts->snap_up_on[!!(ts->flags & SYNAPTICS_SWAP_XY)] = max_x - snap_right_on; + ts->snap_up_off[!!(ts->flags & SYNAPTICS_SWAP_XY)] = max_x - snap_right_off; + ts->snap_down_on[!(ts->flags & SYNAPTICS_SWAP_XY)] = snap_top_on; + ts->snap_down_off[!(ts->flags & SYNAPTICS_SWAP_XY)] = snap_top_off; + ts->snap_up_on[!(ts->flags & SYNAPTICS_SWAP_XY)] = max_y - snap_bottom_on; + ts->snap_up_off[!(ts->flags & SYNAPTICS_SWAP_XY)] = max_y - snap_bottom_off; + printk(KERN_INFO "synaptics_ts_probe: max_x %d, max_y %d\n", max_x, max_y); + printk(KERN_INFO "synaptics_ts_probe: inactive_x %d %d, inactive_y %d %d\n", + inactive_area_left, inactive_area_right, + inactive_area_top, inactive_area_bottom); + printk(KERN_INFO "synaptics_ts_probe: snap_x %d-%d %d-%d, snap_y %d-%d %d-%d\n", + snap_left_on, snap_left_off, snap_right_on, snap_right_off, + snap_top_on, snap_top_off, snap_bottom_on, snap_bottom_off); + input_set_abs_params(ts->input_dev, ABS_X, -inactive_area_left, max_x + inactive_area_right, fuzz_x, 0); + input_set_abs_params(ts->input_dev, ABS_Y, -inactive_area_top, max_y + inactive_area_bottom, fuzz_y, 0); + input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 255, fuzz_p, 0); + input_set_abs_params(ts->input_dev, ABS_TOOL_WIDTH, 0, 15, fuzz_w, 0); + input_set_abs_params(ts->input_dev, ABS_HAT0X, -inactive_area_left, max_x + inactive_area_right, fuzz_x, 0); + input_set_abs_params(ts->input_dev, ABS_HAT0Y, -inactive_area_top, max_y + inactive_area_bottom, fuzz_y, 0); + input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, -inactive_area_left, max_x + inactive_area_right, fuzz_x, 0); + input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, -inactive_area_top, max_y + inactive_area_bottom, fuzz_y, 0); + input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, fuzz_p, 0); + input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 15, fuzz_w, 0); + /* ts->input_dev->name = ts->keypad_info->name; */ + ret = input_register_device(ts->input_dev); + if (ret) { + printk(KERN_ERR "synaptics_ts_probe: Unable to register %s input device\n", ts->input_dev->name); + goto err_input_register_device_failed; + } + if (client->irq) { + ret = request_irq(client->irq, synaptics_ts_irq_handler, irqflags, client->name, ts); + if (ret == 0) { + ret = i2c_smbus_write_byte_data(ts->client, 0xf1, 0x01); /* enable abs int */ + if (ret) + free_irq(client->irq, ts); + } + if (ret == 0) + ts->use_irq = 1; + else + dev_err(&client->dev, "request_irq failed\n"); + } + if (!ts->use_irq) { + hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + ts->timer.function = synaptics_ts_timer_func; + hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL); + } +#ifdef CONFIG_HAS_EARLYSUSPEND + ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1; + ts->early_suspend.suspend = synaptics_ts_early_suspend; + ts->early_suspend.resume = synaptics_ts_late_resume; + register_early_suspend(&ts->early_suspend); +#endif + + printk(KERN_INFO "synaptics_ts_probe: Start touchscreen %s in %s mode\n", ts->input_dev->name, ts->use_irq ? "interrupt" : "polling"); + + return 0; + +err_input_register_device_failed: + input_free_device(ts->input_dev); + +err_input_dev_alloc_failed: +err_detect_failed: +err_power_failed: + kfree(ts); +err_alloc_data_failed: +err_check_functionality_failed: + return ret; +} + +static int synaptics_ts_remove(struct i2c_client *client) +{ + struct synaptics_ts_data *ts = i2c_get_clientdata(client); + unregister_early_suspend(&ts->early_suspend); + if (ts->use_irq) + free_irq(client->irq, ts); + else + hrtimer_cancel(&ts->timer); + input_unregister_device(ts->input_dev); + kfree(ts); + return 0; +} + +static int synaptics_ts_suspend(struct i2c_client *client, pm_message_t mesg) +{ + int ret; + struct synaptics_ts_data *ts = i2c_get_clientdata(client); + + if (ts->use_irq) + disable_irq(client->irq); + else + hrtimer_cancel(&ts->timer); + ret = cancel_work_sync(&ts->work); + if (ret && ts->use_irq) /* if work was pending disable-count is now 2 */ + enable_irq(client->irq); + ret = i2c_smbus_write_byte_data(ts->client, 0xf1, 0); /* disable interrupt */ + if (ret < 0) + printk(KERN_ERR "synaptics_ts_suspend: i2c_smbus_write_byte_data failed\n"); + + ret = i2c_smbus_write_byte_data(client, 0xf0, 0x86); /* deep sleep */ + if (ret < 0) + printk(KERN_ERR "synaptics_ts_suspend: i2c_smbus_write_byte_data failed\n"); + if (ts->power) { + ret = ts->power(0); + if (ret < 0) + printk(KERN_ERR "synaptics_ts_resume power off failed\n"); + } + return 0; +} + +static int synaptics_ts_resume(struct i2c_client *client) +{ + int ret; + struct synaptics_ts_data *ts = i2c_get_clientdata(client); + + if (ts->power) { + ret = ts->power(1); + if (ret < 0) + printk(KERN_ERR "synaptics_ts_resume power on failed\n"); + } + + synaptics_init_panel(ts); + + if (ts->use_irq) + enable_irq(client->irq); + + if (!ts->use_irq) + hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL); + else + i2c_smbus_write_byte_data(ts->client, 0xf1, 0x01); /* enable abs int */ + + return 0; +} + +#ifdef CONFIG_HAS_EARLYSUSPEND +static void synaptics_ts_early_suspend(struct early_suspend *h) +{ + struct synaptics_ts_data *ts; + ts = container_of(h, struct synaptics_ts_data, early_suspend); + synaptics_ts_suspend(ts->client, PMSG_SUSPEND); +} + +static void synaptics_ts_late_resume(struct early_suspend *h) +{ + struct synaptics_ts_data *ts; + ts = container_of(h, struct synaptics_ts_data, early_suspend); + synaptics_ts_resume(ts->client); +} +#endif + +static const struct i2c_device_id synaptics_ts_id[] = { + { SYNAPTICS_I2C_RMI_NAME, 0 }, + { } +}; + +static struct i2c_driver synaptics_ts_driver = { + .probe = synaptics_ts_probe, + .remove = synaptics_ts_remove, +#ifndef CONFIG_HAS_EARLYSUSPEND + .suspend = synaptics_ts_suspend, + .resume = synaptics_ts_resume, +#endif + .id_table = synaptics_ts_id, + .driver = { + .name = SYNAPTICS_I2C_RMI_NAME, + }, +}; + +static int __devinit synaptics_ts_init(void) +{ + synaptics_wq = create_singlethread_workqueue("synaptics_wq"); + if (!synaptics_wq) + return -ENOMEM; + return i2c_add_driver(&synaptics_ts_driver); +} + +static void __exit synaptics_ts_exit(void) +{ + i2c_del_driver(&synaptics_ts_driver); + if (synaptics_wq) + destroy_workqueue(synaptics_wq); +} + +module_init(synaptics_ts_init); +module_exit(synaptics_ts_exit); + +MODULE_DESCRIPTION("Synaptics Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ti_tscadc.c b/ANDROID_3.4.5/drivers/input/touchscreen/ti_tscadc.c new file mode 100644 index 00000000..d229c741 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ti_tscadc.c @@ -0,0 +1,486 @@ +/* + * TI Touch Screen driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input/ti_tscadc.h> +#include <linux/delay.h> + +#define REG_IRQEOI 0x020 +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_STEPCONFIG13 0x0C4 +#define REG_STEPDELAY13 0x0C8 +#define REG_STEPCONFIG14 0x0CC +#define REG_STEPDELAY14 0x0D0 +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +#define IRQWKUP_ENB BIT(0) +#define STPENB_STEPENB 0x7FFF +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) +#define STEPCONFIG_MODE_HWSYNC 0x2 +#define STEPCONFIG_SAMPLES_AVG (1 << 4) +#define STEPCONFIG_XPP (1 << 5) +#define STEPCONFIG_XNN (1 << 6) +#define STEPCONFIG_YPP (1 << 7) +#define STEPCONFIG_YNN (1 << 8) +#define STEPCONFIG_XNP (1 << 9) +#define STEPCONFIG_YPN (1 << 10) +#define STEPCONFIG_INM (1 << 18) +#define STEPCONFIG_INP (1 << 20) +#define STEPCONFIG_INP_5 (1 << 21) +#define STEPCONFIG_FIFO1 (1 << 26) +#define STEPCONFIG_OPENDLY 0xff +#define STEPCONFIG_Z1 (3 << 19) +#define STEPIDLE_INP (1 << 22) +#define STEPCHARGE_RFP (1 << 12) +#define STEPCHARGE_INM (1 << 15) +#define STEPCHARGE_INP (1 << 19) +#define STEPCHARGE_RFM (1 << 23) +#define STEPCHARGE_DELAY 0x1 +#define CNTRLREG_TSCSSENB (1 << 0) +#define CNTRLREG_STEPID (1 << 1) +#define CNTRLREG_STEPCONFIGWRT (1 << 2) +#define CNTRLREG_4WIRE (1 << 5) +#define CNTRLREG_5WIRE (1 << 6) +#define CNTRLREG_8WIRE (3 << 5) +#define CNTRLREG_TSCENB (1 << 7) +#define ADCFSM_STEPID 0x10 + +#define SEQ_SETTLE 275 +#define ADC_CLK 3000000 +#define MAX_12BIT ((1 << 12) - 1) +#define TSCADC_DELTA_X 15 +#define TSCADC_DELTA_Y 15 + +struct tscadc { + struct input_dev *input; + struct clk *tsc_ick; + void __iomem *tsc_base; + unsigned int irq; + unsigned int wires; + unsigned int x_plate_resistance; + bool pen_down; +}; + +static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg) +{ + return readl(ts->tsc_base + reg); +} + +static void tscadc_writel(struct tscadc *tsc, unsigned int reg, + unsigned int val) +{ + writel(val, tsc->tsc_base + reg); +} + +static void tscadc_step_config(struct tscadc *ts_dev) +{ + unsigned int config; + int i; + + /* Configure the Step registers */ + + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + case 5: + config |= STEPCONFIG_YNN | + STEPCONFIG_INP_5 | STEPCONFIG_XNN | + STEPCONFIG_YPP; + break; + case 8: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + } + + for (i = 1; i < 7; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN | + STEPCONFIG_INM | STEPCONFIG_FIFO1; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_YPP; + break; + case 5: + config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 | + STEPCONFIG_XNP | STEPCONFIG_YPN; + break; + case 8: + config |= STEPCONFIG_YPP; + break; + } + + for (i = 7; i < 13; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + /* Charge step configuration */ + config = STEPCONFIG_XPP | STEPCONFIG_YNN | + STEPCHARGE_RFP | STEPCHARGE_RFM | + STEPCHARGE_INM | STEPCHARGE_INP; + + tscadc_writel(ts_dev, REG_CHARGECONFIG, config); + tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY); + + config = 0; + /* Configure to calculate pressure */ + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP | + STEPCONFIG_XNN | STEPCONFIG_INM; + tscadc_writel(ts_dev, REG_STEPCONFIG13, config); + tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY); + + config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1; + tscadc_writel(ts_dev, REG_STEPCONFIG14, config); + tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); +} + +static void tscadc_idle_config(struct tscadc *ts_config) +{ + unsigned int idleconfig; + + idleconfig = STEPCONFIG_YNN | + STEPCONFIG_INM | + STEPCONFIG_YPN | STEPIDLE_INP; + tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig); +} + +static void tscadc_read_coordinates(struct tscadc *ts_dev, + unsigned int *x, unsigned int *y) +{ + unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT); + unsigned int prev_val_x = ~0, prev_val_y = ~0; + unsigned int prev_diff_x = ~0, prev_diff_y = ~0; + unsigned int read, diff; + unsigned int i; + + /* + * Delta filter is used to remove large variations in sampled + * values from ADC. The filter tries to predict where the next + * coordinate could be. This is done by taking a previous + * coordinate and subtracting it form current one. Further the + * algorithm compares the difference with that of a present value, + * if true the value is reported to the sub system. + */ + for (i = 0; i < fifocount - 1; i++) { + read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + diff = abs(read - prev_val_x); + if (diff < prev_diff_x) { + prev_diff_x = diff; + *x = read; + } + prev_val_x = read; + + read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + diff = abs(read - prev_val_y); + if (diff < prev_diff_y) { + prev_diff_y = diff; + *y = read; + } + prev_val_y = read; + } +} + +static irqreturn_t tscadc_irq(int irq, void *dev) +{ + struct tscadc *ts_dev = dev; + struct input_dev *input_dev = ts_dev->input; + unsigned int status, irqclr = 0; + unsigned int x = 0, y = 0; + unsigned int z1, z2, z; + unsigned int fsm; + + status = tscadc_readl(ts_dev, REG_IRQSTATUS); + if (status & IRQENB_FIFO1THRES) { + tscadc_read_coordinates(ts_dev, &x, &y); + + z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + + if (ts_dev->pen_down && z1 != 0 && z2 != 0) { + /* + * Calculate pressure using formula + * Resistance(touch) = x plate resistance * + * x postion/4096 * ((z2 / z1) - 1) + */ + z = z2 - z1; + z *= x; + z *= ts_dev->x_plate_resistance; + z /= z1; + z = (z + 2047) >> 12; + + if (z <= MAX_12BIT) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, z); + input_report_key(input_dev, BTN_TOUCH, 1); + input_sync(input_dev); + } + } + irqclr |= IRQENB_FIFO1THRES; + } + + /* + * Time for sequencer to settle, to read + * correct state of the sequencer. + */ + udelay(SEQ_SETTLE); + + status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS); + if (status & IRQENB_PENUP) { + /* Pen up event */ + fsm = tscadc_readl(ts_dev, REG_ADCFSM); + if (fsm == ADCFSM_STEPID) { + ts_dev->pen_down = false; + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + } else { + ts_dev->pen_down = true; + } + irqclr |= IRQENB_PENUP; + } + + tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr); + /* check pending interrupts */ + tscadc_writel(ts_dev, REG_IRQEOI, 0x0); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); + return IRQ_HANDLED; +} + +/* + * The functions for inserting/removing driver as a module. + */ + +static int __devinit tscadc_probe(struct platform_device *pdev) +{ + const struct tsc_data *pdata = pdev->dev.platform_data; + struct resource *res; + struct tscadc *ts_dev; + struct input_dev *input_dev; + struct clk *clk; + int err; + int clk_value, ctrl, irq; + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data.\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined.\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq ID is specified.\n"); + return -EINVAL; + } + + /* Allocate memory for device */ + ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts_dev || !input_dev) { + dev_err(&pdev->dev, "failed to allocate memory.\n"); + err = -ENOMEM; + goto err_free_mem; + } + + ts_dev->input = input_dev; + ts_dev->irq = irq; + ts_dev->wires = pdata->wires; + ts_dev->x_plate_resistance = pdata->x_plate_resistance; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to reserve registers.\n"); + err = -EBUSY; + goto err_free_mem; + } + + ts_dev->tsc_base = ioremap(res->start, resource_size(res)); + if (!ts_dev->tsc_base) { + dev_err(&pdev->dev, "failed to map registers.\n"); + err = -ENOMEM; + goto err_release_mem_region; + } + + err = request_irq(ts_dev->irq, tscadc_irq, + 0, pdev->dev.driver->name, ts_dev); + if (err) { + dev_err(&pdev->dev, "failed to allocate irq.\n"); + goto err_unmap_regs; + } + + ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); + if (IS_ERR(ts_dev->tsc_ick)) { + dev_err(&pdev->dev, "failed to get TSC ick\n"); + goto err_free_irq; + } + clk_enable(ts_dev->tsc_ick); + + clk = clk_get(&pdev->dev, "adc_tsc_fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get TSC fck\n"); + err = PTR_ERR(clk); + goto err_disable_clk; + } + + clk_value = clk_get_rate(clk) / ADC_CLK; + clk_put(clk); + + if (clk_value < 7) { + dev_err(&pdev->dev, "clock input less than min clock requirement\n"); + goto err_disable_clk; + } + /* CLKDIV needs to be configured to the value minus 1 */ + tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1); + + /* Enable wake-up of the SoC using touchscreen */ + tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); + + ctrl = CNTRLREG_STEPCONFIGWRT | + CNTRLREG_TSCENB | + CNTRLREG_STEPID; + switch (ts_dev->wires) { + case 4: + ctrl |= CNTRLREG_4WIRE; + break; + case 5: + ctrl |= CNTRLREG_5WIRE; + break; + case 8: + ctrl |= CNTRLREG_8WIRE; + break; + } + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + tscadc_idle_config(ts_dev); + tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); + tscadc_step_config(ts_dev); + tscadc_writel(ts_dev, REG_FIFO1THR, 6); + + ctrl |= CNTRLREG_TSCSSENB; + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + input_dev->name = "ti-tsc-adc"; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + + /* register to the input system */ + err = input_register_device(input_dev); + if (err) + goto err_disable_clk; + + platform_set_drvdata(pdev, ts_dev); + return 0; + +err_disable_clk: + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); +err_free_irq: + free_irq(ts_dev->irq, ts_dev); +err_unmap_regs: + iounmap(ts_dev->tsc_base); +err_release_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input_dev); + kfree(ts_dev); + return err; +} + +static int __devexit tscadc_remove(struct platform_device *pdev) +{ + struct tscadc *ts_dev = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(ts_dev->tsc_base); + release_mem_region(res->start, resource_size(res)); + + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); + + kfree(ts_dev); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver ti_tsc_driver = { + .probe = tscadc_probe, + .remove = __devexit_p(tscadc_remove), + .driver = { + .name = "tsc", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(ti_tsc_driver); + +MODULE_DESCRIPTION("TI touchscreen controller driver"); +MODULE_AUTHOR("Rachna Patil <rachna@ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/tnetv107x-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/tnetv107x-ts.c new file mode 100644 index 00000000..7e748809 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/tnetv107x-ts.c @@ -0,0 +1,386 @@ +/* + * Texas Instruments TNETV107X Touchscreen Driver + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/tnetv107x.h> + +#define TSC_PENUP_POLL (HZ / 5) +#define IDLE_TIMEOUT 100 /* msec */ + +/* + * The first and last samples of a touch interval are usually garbage and need + * to be filtered out with these devices. The following definitions control + * the number of samples skipped. + */ +#define TSC_HEAD_SKIP 1 +#define TSC_TAIL_SKIP 1 +#define TSC_SKIP (TSC_HEAD_SKIP + TSC_TAIL_SKIP + 1) +#define TSC_SAMPLES (TSC_SKIP + 1) + +/* Register Offsets */ +struct tsc_regs { + u32 rev; + u32 tscm; + u32 bwcm; + u32 swc; + u32 adcchnl; + u32 adcdata; + u32 chval[4]; +}; + +/* TSC Mode Configuration Register (tscm) bits */ +#define WMODE BIT(0) +#define TSKIND BIT(1) +#define ZMEASURE_EN BIT(2) +#define IDLE BIT(3) +#define TSC_EN BIT(4) +#define STOP BIT(5) +#define ONE_SHOT BIT(6) +#define SINGLE BIT(7) +#define AVG BIT(8) +#define AVGNUM(x) (((x) & 0x03) << 9) +#define PVSTC(x) (((x) & 0x07) << 11) +#define PON BIT(14) +#define PONBG BIT(15) +#define AFERST BIT(16) + +/* ADC DATA Capture Register bits */ +#define DATA_VALID BIT(16) + +/* Register Access Macros */ +#define tsc_read(ts, reg) __raw_readl(&(ts)->regs->reg) +#define tsc_write(ts, reg, val) __raw_writel(val, &(ts)->regs->reg); +#define tsc_set_bits(ts, reg, val) \ + tsc_write(ts, reg, tsc_read(ts, reg) | (val)) +#define tsc_clr_bits(ts, reg, val) \ + tsc_write(ts, reg, tsc_read(ts, reg) & ~(val)) + +struct sample { + int x, y, p; +}; + +struct tsc_data { + struct input_dev *input_dev; + struct resource *res; + struct tsc_regs __iomem *regs; + struct timer_list timer; + spinlock_t lock; + struct clk *clk; + struct device *dev; + int sample_count; + struct sample samples[TSC_SAMPLES]; + int tsc_irq; +}; + +static int tsc_read_sample(struct tsc_data *ts, struct sample* sample) +{ + int x, y, z1, z2, t, p = 0; + u32 val; + + val = tsc_read(ts, chval[0]); + if (val & DATA_VALID) + x = val & 0xffff; + else + return -EINVAL; + + y = tsc_read(ts, chval[1]) & 0xffff; + z1 = tsc_read(ts, chval[2]) & 0xffff; + z2 = tsc_read(ts, chval[3]) & 0xffff; + + if (z1) { + t = ((600 * x) * (z2 - z1)); + p = t / (u32) (z1 << 12); + if (p < 0) + p = 0; + } + + sample->x = x; + sample->y = y; + sample->p = p; + + return 0; +} + +static void tsc_poll(unsigned long data) +{ + struct tsc_data *ts = (struct tsc_data *)data; + unsigned long flags; + int i, val, x, y, p; + + spin_lock_irqsave(&ts->lock, flags); + + if (ts->sample_count >= TSC_SKIP) { + input_report_abs(ts->input_dev, ABS_PRESSURE, 0); + input_report_key(ts->input_dev, BTN_TOUCH, 0); + input_sync(ts->input_dev); + } else if (ts->sample_count > 0) { + /* + * A touch event lasted less than our skip count. Salvage and + * report anyway. + */ + for (i = 0, val = 0; i < ts->sample_count; i++) + val += ts->samples[i].x; + x = val / ts->sample_count; + + for (i = 0, val = 0; i < ts->sample_count; i++) + val += ts->samples[i].y; + y = val / ts->sample_count; + + for (i = 0, val = 0; i < ts->sample_count; i++) + val += ts->samples[i].p; + p = val / ts->sample_count; + + input_report_abs(ts->input_dev, ABS_X, x); + input_report_abs(ts->input_dev, ABS_Y, y); + input_report_abs(ts->input_dev, ABS_PRESSURE, p); + input_report_key(ts->input_dev, BTN_TOUCH, 1); + input_sync(ts->input_dev); + } + + ts->sample_count = 0; + + spin_unlock_irqrestore(&ts->lock, flags); +} + +static irqreturn_t tsc_irq(int irq, void *dev_id) +{ + struct tsc_data *ts = (struct tsc_data *)dev_id; + struct sample *sample; + int index; + + spin_lock(&ts->lock); + + index = ts->sample_count % TSC_SAMPLES; + sample = &ts->samples[index]; + if (tsc_read_sample(ts, sample) < 0) + goto out; + + if (++ts->sample_count >= TSC_SKIP) { + index = (ts->sample_count - TSC_TAIL_SKIP - 1) % TSC_SAMPLES; + sample = &ts->samples[index]; + + input_report_abs(ts->input_dev, ABS_X, sample->x); + input_report_abs(ts->input_dev, ABS_Y, sample->y); + input_report_abs(ts->input_dev, ABS_PRESSURE, sample->p); + if (ts->sample_count == TSC_SKIP) + input_report_key(ts->input_dev, BTN_TOUCH, 1); + input_sync(ts->input_dev); + } + mod_timer(&ts->timer, jiffies + TSC_PENUP_POLL); +out: + spin_unlock(&ts->lock); + return IRQ_HANDLED; +} + +static int tsc_start(struct input_dev *dev) +{ + struct tsc_data *ts = input_get_drvdata(dev); + unsigned long timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT); + u32 val; + + clk_enable(ts->clk); + + /* Go to idle mode, before any initialization */ + while (time_after(timeout, jiffies)) { + if (tsc_read(ts, tscm) & IDLE) + break; + } + + if (time_before(timeout, jiffies)) { + dev_warn(ts->dev, "timeout waiting for idle\n"); + clk_disable(ts->clk); + return -EIO; + } + + /* Configure TSC Control register*/ + val = (PONBG | PON | PVSTC(4) | ONE_SHOT | ZMEASURE_EN); + tsc_write(ts, tscm, val); + + /* Bring TSC out of reset: Clear AFE reset bit */ + val &= ~(AFERST); + tsc_write(ts, tscm, val); + + /* Configure all pins for hardware control*/ + tsc_write(ts, bwcm, 0); + + /* Finally enable the TSC */ + tsc_set_bits(ts, tscm, TSC_EN); + + return 0; +} + +static void tsc_stop(struct input_dev *dev) +{ + struct tsc_data *ts = input_get_drvdata(dev); + + tsc_clr_bits(ts, tscm, TSC_EN); + synchronize_irq(ts->tsc_irq); + del_timer_sync(&ts->timer); + clk_disable(ts->clk); +} + +static int __devinit tsc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct tsc_data *ts; + int error = 0; + u32 rev = 0; + + ts = kzalloc(sizeof(struct tsc_data), GFP_KERNEL); + if (!ts) { + dev_err(dev, "cannot allocate device info\n"); + return -ENOMEM; + } + + ts->dev = dev; + spin_lock_init(&ts->lock); + setup_timer(&ts->timer, tsc_poll, (unsigned long)ts); + platform_set_drvdata(pdev, ts); + + ts->tsc_irq = platform_get_irq(pdev, 0); + if (ts->tsc_irq < 0) { + dev_err(dev, "cannot determine device interrupt\n"); + error = -ENODEV; + goto error_res; + } + + ts->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!ts->res) { + dev_err(dev, "cannot determine register area\n"); + error = -ENODEV; + goto error_res; + } + + if (!request_mem_region(ts->res->start, resource_size(ts->res), + pdev->name)) { + dev_err(dev, "cannot claim register memory\n"); + ts->res = NULL; + error = -EINVAL; + goto error_res; + } + + ts->regs = ioremap(ts->res->start, resource_size(ts->res)); + if (!ts->regs) { + dev_err(dev, "cannot map register memory\n"); + error = -ENOMEM; + goto error_map; + } + + ts->clk = clk_get(dev, NULL); + if (IS_ERR(ts->clk)) { + dev_err(dev, "cannot claim device clock\n"); + error = PTR_ERR(ts->clk); + goto error_clk; + } + + error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0, + dev_name(dev), ts); + if (error < 0) { + dev_err(ts->dev, "Could not allocate ts irq\n"); + goto error_irq; + } + + ts->input_dev = input_allocate_device(); + if (!ts->input_dev) { + dev_err(dev, "cannot allocate input device\n"); + error = -ENOMEM; + goto error_input; + } + input_set_drvdata(ts->input_dev, ts); + + ts->input_dev->name = pdev->name; + ts->input_dev->id.bustype = BUS_HOST; + ts->input_dev->dev.parent = &pdev->dev; + ts->input_dev->open = tsc_start; + ts->input_dev->close = tsc_stop; + + clk_enable(ts->clk); + rev = tsc_read(ts, rev); + ts->input_dev->id.product = ((rev >> 8) & 0x07); + ts->input_dev->id.version = ((rev >> 16) & 0xfff); + clk_disable(ts->clk); + + __set_bit(EV_KEY, ts->input_dev->evbit); + __set_bit(EV_ABS, ts->input_dev->evbit); + __set_bit(BTN_TOUCH, ts->input_dev->keybit); + + input_set_abs_params(ts->input_dev, ABS_X, 0, 0xffff, 5, 0); + input_set_abs_params(ts->input_dev, ABS_Y, 0, 0xffff, 5, 0); + input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 4095, 128, 0); + + error = input_register_device(ts->input_dev); + if (error < 0) { + dev_err(dev, "failed input device registration\n"); + goto error_reg; + } + + return 0; + +error_reg: + input_free_device(ts->input_dev); +error_input: + free_irq(ts->tsc_irq, ts); +error_irq: + clk_put(ts->clk); +error_clk: + iounmap(ts->regs); +error_map: + release_mem_region(ts->res->start, resource_size(ts->res)); +error_res: + platform_set_drvdata(pdev, NULL); + kfree(ts); + + return error; +} + +static int __devexit tsc_remove(struct platform_device *pdev) +{ + struct tsc_data *ts = platform_get_drvdata(pdev); + + input_unregister_device(ts->input_dev); + free_irq(ts->tsc_irq, ts); + clk_put(ts->clk); + iounmap(ts->regs); + release_mem_region(ts->res->start, resource_size(ts->res)); + platform_set_drvdata(pdev, NULL); + kfree(ts); + + return 0; +} + +static struct platform_driver tsc_driver = { + .probe = tsc_probe, + .remove = __devexit_p(tsc_remove), + .driver.name = "tnetv107x-ts", + .driver.owner = THIS_MODULE, +}; +module_platform_driver(tsc_driver); + +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_DESCRIPTION("TNETV107X Touchscreen Driver"); +MODULE_ALIAS("platform:tnetv107x-ts"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/touchit213.c b/ANDROID_3.4.5/drivers/input/touchscreen/touchit213.c new file mode 100644 index 00000000..d1297ba1 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/touchit213.c @@ -0,0 +1,234 @@ +/* + * Sahara TouchIT-213 serial touchscreen driver + * + * Copyright (c) 2007-2008 Claudio Nieder <private@claudio.ch> + * + * Based on Touchright driver (drivers/input/touchscreen/touchright.c) + * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * Copyright (c) 2004 Vojtech Pavlik + * and Dan Streetman <ddstreet@ieee.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Sahara TouchIT-213 serial touchscreen driver" + +MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +/* + * Data is received through COM1 at 9600bit/s,8bit,no parity in packets + * of 5 byte each. + * + * +--------+ +--------+ +--------+ +--------+ +--------+ + * |1000000p| |0xxxxxxx| |0xxxxxxx| |0yyyyyyy| |0yyyyyyy| + * +--------+ +--------+ +--------+ +--------+ +--------+ + * MSB LSB MSB LSB + * + * The value of p is 1 as long as the screen is touched and 0 when + * reporting the location where touching stopped, e.g. where the pen was + * lifted from the screen. + * + * When holding the screen in landscape mode as the BIOS text output is + * presented, x is the horizontal axis with values growing from left to + * right and y is the vertical axis with values growing from top to + * bottom. + * + * When holding the screen in portrait mode with the Sahara logo in its + * correct position, x ist the vertical axis with values growing from + * top to bottom and y is the horizontal axis with values growing from + * right to left. + */ + +#define T213_FORMAT_TOUCH_BIT 0x01 +#define T213_FORMAT_STATUS_BYTE 0x80 +#define T213_FORMAT_STATUS_MASK ~T213_FORMAT_TOUCH_BIT + +/* + * On my Sahara Touch-IT 213 I have observed x values from 0 to 0x7f0 + * and y values from 0x1d to 0x7e9, so the actual measurement is + * probably done with an 11 bit precision. + */ +#define T213_MIN_XC 0 +#define T213_MAX_XC 0x07ff +#define T213_MIN_YC 0 +#define T213_MAX_YC 0x07ff + +/* + * Per-touchscreen data. + */ + +struct touchit213 { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char csum; + unsigned char data[5]; + char phys[32]; +}; + +static irqreturn_t touchit213_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct touchit213 *touchit213 = serio_get_drvdata(serio); + struct input_dev *dev = touchit213->dev; + + touchit213->data[touchit213->idx] = data; + + switch (touchit213->idx++) { + case 0: + if ((touchit213->data[0] & T213_FORMAT_STATUS_MASK) != + T213_FORMAT_STATUS_BYTE) { + pr_debug("unsynchronized data: 0x%02x\n", data); + touchit213->idx = 0; + } + break; + + case 4: + touchit213->idx = 0; + input_report_abs(dev, ABS_X, + (touchit213->data[1] << 7) | touchit213->data[2]); + input_report_abs(dev, ABS_Y, + (touchit213->data[3] << 7) | touchit213->data[4]); + input_report_key(dev, BTN_TOUCH, + touchit213->data[0] & T213_FORMAT_TOUCH_BIT); + input_sync(dev); + break; + } + + return IRQ_HANDLED; +} + +/* + * touchit213_disconnect() is the opposite of touchit213_connect() + */ + +static void touchit213_disconnect(struct serio *serio) +{ + struct touchit213 *touchit213 = serio_get_drvdata(serio); + + input_get_device(touchit213->dev); + input_unregister_device(touchit213->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(touchit213->dev); + kfree(touchit213); +} + +/* + * touchit213_connect() is the routine that is called when someone adds a + * new serio device that supports the Touchright protocol and registers it as + * an input device. + */ + +static int touchit213_connect(struct serio *serio, struct serio_driver *drv) +{ + struct touchit213 *touchit213; + struct input_dev *input_dev; + int err; + + touchit213 = kzalloc(sizeof(struct touchit213), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!touchit213 || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + touchit213->serio = serio; + touchit213->dev = input_dev; + snprintf(touchit213->phys, sizeof(touchit213->phys), + "%s/input0", serio->phys); + + input_dev->name = "Sahara Touch-iT213 Serial TouchScreen"; + input_dev->phys = touchit213->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TOUCHIT213; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(touchit213->dev, ABS_X, + T213_MIN_XC, T213_MAX_XC, 0, 0); + input_set_abs_params(touchit213->dev, ABS_Y, + T213_MIN_YC, T213_MAX_YC, 0, 0); + + serio_set_drvdata(serio, touchit213); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(touchit213->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(touchit213); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id touchit213_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TOUCHIT213, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, touchit213_serio_ids); + +static struct serio_driver touchit213_drv = { + .driver = { + .name = "touchit213", + }, + .description = DRIVER_DESC, + .id_table = touchit213_serio_ids, + .interrupt = touchit213_interrupt, + .connect = touchit213_connect, + .disconnect = touchit213_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init touchit213_init(void) +{ + return serio_register_driver(&touchit213_drv); +} + +static void __exit touchit213_exit(void) +{ + serio_unregister_driver(&touchit213_drv); +} + +module_init(touchit213_init); +module_exit(touchit213_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/touchright.c b/ANDROID_3.4.5/drivers/input/touchscreen/touchright.c new file mode 100644 index 00000000..3a5c142c --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/touchright.c @@ -0,0 +1,194 @@ +/* + * Touchright serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * + * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c) + * Copyright (c) 2004 Vojtech Pavlik + * and Dan Streetman <ddstreet@ieee.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Touchright serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define TR_FORMAT_TOUCH_BIT 0x01 +#define TR_FORMAT_STATUS_BYTE 0x40 +#define TR_FORMAT_STATUS_MASK ~TR_FORMAT_TOUCH_BIT + +#define TR_LENGTH 5 + +#define TR_MIN_XC 0 +#define TR_MAX_XC 0x1ff +#define TR_MIN_YC 0 +#define TR_MAX_YC 0x1ff + +/* + * Per-touchscreen data. + */ + +struct tr { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[TR_LENGTH]; + char phys[32]; +}; + +static irqreturn_t tr_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct tr *tr = serio_get_drvdata(serio); + struct input_dev *dev = tr->dev; + + tr->data[tr->idx] = data; + + if ((tr->data[0] & TR_FORMAT_STATUS_MASK) == TR_FORMAT_STATUS_BYTE) { + if (++tr->idx == TR_LENGTH) { + input_report_abs(dev, ABS_X, + (tr->data[1] << 5) | (tr->data[2] >> 1)); + input_report_abs(dev, ABS_Y, + (tr->data[3] << 5) | (tr->data[4] >> 1)); + input_report_key(dev, BTN_TOUCH, + tr->data[0] & TR_FORMAT_TOUCH_BIT); + input_sync(dev); + tr->idx = 0; + } + } + + return IRQ_HANDLED; +} + +/* + * tr_disconnect() is the opposite of tr_connect() + */ + +static void tr_disconnect(struct serio *serio) +{ + struct tr *tr = serio_get_drvdata(serio); + + input_get_device(tr->dev); + input_unregister_device(tr->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(tr->dev); + kfree(tr); +} + +/* + * tr_connect() is the routine that is called when someone adds a + * new serio device that supports the Touchright protocol and registers it as + * an input device. + */ + +static int tr_connect(struct serio *serio, struct serio_driver *drv) +{ + struct tr *tr; + struct input_dev *input_dev; + int err; + + tr = kzalloc(sizeof(struct tr), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!tr || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + tr->serio = serio; + tr->dev = input_dev; + snprintf(tr->phys, sizeof(tr->phys), "%s/input0", serio->phys); + + input_dev->name = "Touchright Serial TouchScreen"; + input_dev->phys = tr->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TOUCHRIGHT; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(tr->dev, ABS_X, TR_MIN_XC, TR_MAX_XC, 0, 0); + input_set_abs_params(tr->dev, ABS_Y, TR_MIN_YC, TR_MAX_YC, 0, 0); + + serio_set_drvdata(serio, tr); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(tr->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(tr); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id tr_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TOUCHRIGHT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, tr_serio_ids); + +static struct serio_driver tr_drv = { + .driver = { + .name = "touchright", + }, + .description = DRIVER_DESC, + .id_table = tr_serio_ids, + .interrupt = tr_interrupt, + .connect = tr_connect, + .disconnect = tr_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init tr_init(void) +{ + return serio_register_driver(&tr_drv); +} + +static void __exit tr_exit(void) +{ + serio_unregister_driver(&tr_drv); +} + +module_init(tr_init); +module_exit(tr_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/touchwin.c b/ANDROID_3.4.5/drivers/input/touchscreen/touchwin.c new file mode 100644 index 00000000..763a656a --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/touchwin.c @@ -0,0 +1,201 @@ +/* + * Touchwindow serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * + * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c) + * Copyright (c) 2004 Vojtech Pavlik + * and Dan Streetman <ddstreet@ieee.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +/* + * 2005/02/19 Rick Koch: + * The Touchwindow I used is made by Edmark Corp. and + * constantly outputs a stream of 0's unless it is touched. + * It then outputs 3 bytes: X, Y, and a copy of Y. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Touchwindow serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define TW_LENGTH 3 + +#define TW_MIN_XC 0 +#define TW_MAX_XC 0xff +#define TW_MIN_YC 0 +#define TW_MAX_YC 0xff + +/* + * Per-touchscreen data. + */ + +struct tw { + struct input_dev *dev; + struct serio *serio; + int idx; + int touched; + unsigned char data[TW_LENGTH]; + char phys[32]; +}; + +static irqreturn_t tw_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct tw *tw = serio_get_drvdata(serio); + struct input_dev *dev = tw->dev; + + if (data) { /* touch */ + tw->touched = 1; + tw->data[tw->idx++] = data; + /* verify length and that the two Y's are the same */ + if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { + input_report_abs(dev, ABS_X, tw->data[0]); + input_report_abs(dev, ABS_Y, tw->data[1]); + input_report_key(dev, BTN_TOUCH, 1); + input_sync(dev); + tw->idx = 0; + } + } else if (tw->touched) { /* untouch */ + input_report_key(dev, BTN_TOUCH, 0); + input_sync(dev); + tw->idx = 0; + tw->touched = 0; + } + + return IRQ_HANDLED; +} + +/* + * tw_disconnect() is the opposite of tw_connect() + */ + +static void tw_disconnect(struct serio *serio) +{ + struct tw *tw = serio_get_drvdata(serio); + + input_get_device(tw->dev); + input_unregister_device(tw->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(tw->dev); + kfree(tw); +} + +/* + * tw_connect() is the routine that is called when someone adds a + * new serio device that supports the Touchwin protocol and registers it as + * an input device. + */ + +static int tw_connect(struct serio *serio, struct serio_driver *drv) +{ + struct tw *tw; + struct input_dev *input_dev; + int err; + + tw = kzalloc(sizeof(struct tw), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!tw || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + tw->serio = serio; + tw->dev = input_dev; + snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys); + + input_dev->name = "Touchwindow Serial TouchScreen"; + input_dev->phys = tw->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TOUCHWIN; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0); + input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0); + + serio_set_drvdata(serio, tw); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(tw->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(tw); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id tw_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TOUCHWIN, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, tw_serio_ids); + +static struct serio_driver tw_drv = { + .driver = { + .name = "touchwin", + }, + .description = DRIVER_DESC, + .id_table = tw_serio_ids, + .interrupt = tw_interrupt, + .connect = tw_connect, + .disconnect = tw_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init tw_init(void) +{ + return serio_register_driver(&tw_drv); +} + +static void __exit tw_exit(void) +{ + serio_unregister_driver(&tw_drv); +} + +module_init(tw_init); +module_exit(tw_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/tps6507x-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/tps6507x-ts.c new file mode 100644 index 00000000..f7eda3d0 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/tps6507x-ts.c @@ -0,0 +1,377 @@ +/* + * Touchscreen driver for the tps6507x chip. + * + * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com) + * + * Credits: + * + * Using code from tsc2007, MtekVision Co., Ltd. + * + * For licencing details see kernel-base/COPYING + * + * TPS65070, TPS65073, TPS650731, and TPS650732 support + * 10 bit touch screen interface. + */ + +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/mfd/tps6507x.h> +#include <linux/input/tps6507x-ts.h> +#include <linux/delay.h> + +#define TSC_DEFAULT_POLL_PERIOD 30 /* ms */ +#define TPS_DEFAULT_MIN_PRESSURE 0x30 +#define MAX_10BIT ((1 << 10) - 1) + +#define TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \ + TPS6507X_ADCONFIG_START_CONVERSION | \ + TPS6507X_ADCONFIG_INPUT_REAL_TSC) +#define TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC) + +struct ts_event { + u16 x; + u16 y; + u16 pressure; +}; + +struct tps6507x_ts { + struct input_dev *input_dev; + struct device *dev; + char phys[32]; + struct delayed_work work; + unsigned polling; /* polling is active */ + struct ts_event tc; + struct tps6507x_dev *mfd; + u16 model; + unsigned pendown; + int irq; + void (*clear_penirq)(void); + unsigned long poll_period; /* ms */ + u16 min_pressure; + int vref; /* non-zero to leave vref on */ +}; + +static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data) +{ + int err; + + err = tsc->mfd->read_dev(tsc->mfd, reg, 1, data); + + if (err) + return err; + + return 0; +} + +static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data) +{ + return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data); +} + +static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc, + u8 tsc_mode, u16 *value) +{ + s32 ret; + u8 adc_status; + u8 result; + + /* Route input signal to A/D converter */ + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode); + if (ret) { + dev_err(tsc->dev, "TSC mode read failed\n"); + goto err; + } + + /* Start A/D conversion */ + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG, + TPS6507X_ADCONFIG_CONVERT_TS); + if (ret) { + dev_err(tsc->dev, "ADC config write failed\n"); + return ret; + } + + do { + ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG, + &adc_status); + if (ret) { + dev_err(tsc->dev, "ADC config read failed\n"); + goto err; + } + } while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION); + + ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result); + if (ret) { + dev_err(tsc->dev, "ADC result 2 read failed\n"); + goto err; + } + + *value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8; + + ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result); + if (ret) { + dev_err(tsc->dev, "ADC result 1 read failed\n"); + goto err; + } + + *value |= result; + + dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value); + +err: + return ret; +} + +/* Need to call tps6507x_adc_standby() after using A/D converter for the + * touch screen interrupt to work properly. + */ + +static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc) +{ + s32 ret; + s32 loops = 0; + u8 val; + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG, + TPS6507X_ADCONFIG_INPUT_TSC); + if (ret) + return ret; + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, + TPS6507X_TSCMODE_STANDBY); + if (ret) + return ret; + + ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val); + if (ret) + return ret; + + while (val & TPS6507X_REG_TSC_INT) { + mdelay(10); + ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val); + if (ret) + return ret; + loops++; + } + + return ret; +} + +static void tps6507x_ts_handler(struct work_struct *work) +{ + struct tps6507x_ts *tsc = container_of(work, + struct tps6507x_ts, work.work); + struct input_dev *input_dev = tsc->input_dev; + int pendown; + int schd; + int poll = 0; + s32 ret; + + ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE, + &tsc->tc.pressure); + if (ret) + goto done; + + pendown = tsc->tc.pressure > tsc->min_pressure; + + if (unlikely(!pendown && tsc->pendown)) { + dev_dbg(tsc->dev, "UP\n"); + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + tsc->pendown = 0; + } + + if (pendown) { + + if (!tsc->pendown) { + dev_dbg(tsc->dev, "DOWN\n"); + input_report_key(input_dev, BTN_TOUCH, 1); + } else + dev_dbg(tsc->dev, "still down\n"); + + ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION, + &tsc->tc.x); + if (ret) + goto done; + + ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION, + &tsc->tc.y); + if (ret) + goto done; + + input_report_abs(input_dev, ABS_X, tsc->tc.x); + input_report_abs(input_dev, ABS_Y, tsc->tc.y); + input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure); + input_sync(input_dev); + tsc->pendown = 1; + poll = 1; + } + +done: + /* always poll if not using interrupts */ + poll = 1; + + if (poll) { + schd = schedule_delayed_work(&tsc->work, + msecs_to_jiffies(tsc->poll_period)); + if (schd) + tsc->polling = 1; + else { + tsc->polling = 0; + dev_err(tsc->dev, "re-schedule failed"); + } + } else + tsc->polling = 0; + + ret = tps6507x_adc_standby(tsc); +} + +static int tps6507x_ts_probe(struct platform_device *pdev) +{ + int error; + struct tps6507x_ts *tsc; + struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent); + struct touchscreen_init_data *init_data; + struct input_dev *input_dev; + struct tps6507x_board *tps_board; + int schd; + + /** + * tps_board points to pmic related constants + * coming from the board-evm file. + */ + + tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data; + + if (!tps_board) { + dev_err(tps6507x_dev->dev, + "Could not find tps6507x platform data\n"); + return -EIO; + } + + /** + * init_data points to array of regulator_init structures + * coming from the board-evm file. + */ + + init_data = tps_board->tps6507x_ts_init_data; + + tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL); + if (!tsc) { + dev_err(tps6507x_dev->dev, "failed to allocate driver data\n"); + error = -ENOMEM; + goto err0; + } + + tps6507x_dev->ts = tsc; + tsc->mfd = tps6507x_dev; + tsc->dev = tps6507x_dev->dev; + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(tsc->dev, "Failed to allocate input device.\n"); + error = -ENOMEM; + goto err1; + } + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0); + + input_dev->name = "TPS6507x Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = tsc->dev; + + snprintf(tsc->phys, sizeof(tsc->phys), + "%s/input0", dev_name(tsc->dev)); + input_dev->phys = tsc->phys; + + dev_dbg(tsc->dev, "device: %s\n", input_dev->phys); + + input_set_drvdata(input_dev, tsc); + + tsc->input_dev = input_dev; + + INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler); + + if (init_data) { + tsc->poll_period = init_data->poll_period; + tsc->vref = init_data->vref; + tsc->min_pressure = init_data->min_pressure; + input_dev->id.vendor = init_data->vendor; + input_dev->id.product = init_data->product; + input_dev->id.version = init_data->version; + } else { + tsc->poll_period = TSC_DEFAULT_POLL_PERIOD; + tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE; + } + + error = tps6507x_adc_standby(tsc); + if (error) + goto err2; + + error = input_register_device(input_dev); + if (error) + goto err2; + + schd = schedule_delayed_work(&tsc->work, + msecs_to_jiffies(tsc->poll_period)); + + if (schd) + tsc->polling = 1; + else { + tsc->polling = 0; + dev_err(tsc->dev, "schedule failed"); + goto err2; + } + platform_set_drvdata(pdev, tps6507x_dev); + + return 0; + +err2: + cancel_delayed_work_sync(&tsc->work); + input_free_device(input_dev); +err1: + kfree(tsc); + tps6507x_dev->ts = NULL; +err0: + return error; +} + +static int __devexit tps6507x_ts_remove(struct platform_device *pdev) +{ + struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev); + struct tps6507x_ts *tsc = tps6507x_dev->ts; + struct input_dev *input_dev = tsc->input_dev; + + cancel_delayed_work_sync(&tsc->work); + + input_unregister_device(input_dev); + + tps6507x_dev->ts = NULL; + kfree(tsc); + + return 0; +} + +static struct platform_driver tps6507x_ts_driver = { + .driver = { + .name = "tps6507x-ts", + .owner = THIS_MODULE, + }, + .probe = tps6507x_ts_probe, + .remove = __devexit_p(tps6507x_ts_remove), +}; +module_platform_driver(tps6507x_ts_driver); + +MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>"); +MODULE_DESCRIPTION("TPS6507x - TouchScreen driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:tps6507x-ts"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/tsc2005.c b/ANDROID_3.4.5/drivers/input/touchscreen/tsc2005.c new file mode 100644 index 00000000..b6adeaee --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/tsc2005.c @@ -0,0 +1,754 @@ +/* + * TSC2005 touchscreen driver + * + * Copyright (C) 2006-2010 Nokia Corporation + * + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/spi/spi.h> +#include <linux/spi/tsc2005.h> + +/* + * The touchscreen interface operates as follows: + * + * 1) Pen is pressed against the touchscreen. + * 2) TSC2005 performs AD conversion. + * 3) After the conversion is done TSC2005 drives DAV line down. + * 4) GPIO IRQ is received and tsc2005_irq_thread() is scheduled. + * 5) tsc2005_irq_thread() queues up an spi transfer to fetch the x, y, z1, z2 + * values. + * 6) tsc2005_irq_thread() reports coordinates to input layer and sets up + * tsc2005_penup_timer() to be called after TSC2005_PENUP_TIME_MS (40ms). + * 7) When the penup timer expires, there have not been touch or DAV interrupts + * during the last 40ms which means the pen has been lifted. + * + * ESD recovery via a hardware reset is done if the TSC2005 doesn't respond + * after a configurable period (in ms) of activity. If esd_timeout is 0, the + * watchdog is disabled. + */ + +/* control byte 1 */ +#define TSC2005_CMD 0x80 +#define TSC2005_CMD_NORMAL 0x00 +#define TSC2005_CMD_STOP 0x01 +#define TSC2005_CMD_12BIT 0x04 + +/* control byte 0 */ +#define TSC2005_REG_READ 0x0001 +#define TSC2005_REG_PND0 0x0002 +#define TSC2005_REG_X 0x0000 +#define TSC2005_REG_Y 0x0008 +#define TSC2005_REG_Z1 0x0010 +#define TSC2005_REG_Z2 0x0018 +#define TSC2005_REG_TEMP_HIGH 0x0050 +#define TSC2005_REG_CFR0 0x0060 +#define TSC2005_REG_CFR1 0x0068 +#define TSC2005_REG_CFR2 0x0070 + +/* configuration register 0 */ +#define TSC2005_CFR0_PRECHARGE_276US 0x0040 +#define TSC2005_CFR0_STABTIME_1MS 0x0300 +#define TSC2005_CFR0_CLOCK_1MHZ 0x1000 +#define TSC2005_CFR0_RESOLUTION12 0x2000 +#define TSC2005_CFR0_PENMODE 0x8000 +#define TSC2005_CFR0_INITVALUE (TSC2005_CFR0_STABTIME_1MS | \ + TSC2005_CFR0_CLOCK_1MHZ | \ + TSC2005_CFR0_RESOLUTION12 | \ + TSC2005_CFR0_PRECHARGE_276US | \ + TSC2005_CFR0_PENMODE) + +/* bits common to both read and write of configuration register 0 */ +#define TSC2005_CFR0_RW_MASK 0x3fff + +/* configuration register 1 */ +#define TSC2005_CFR1_BATCHDELAY_4MS 0x0003 +#define TSC2005_CFR1_INITVALUE TSC2005_CFR1_BATCHDELAY_4MS + +/* configuration register 2 */ +#define TSC2005_CFR2_MAVE_Z 0x0004 +#define TSC2005_CFR2_MAVE_Y 0x0008 +#define TSC2005_CFR2_MAVE_X 0x0010 +#define TSC2005_CFR2_AVG_7 0x0800 +#define TSC2005_CFR2_MEDIUM_15 0x3000 +#define TSC2005_CFR2_INITVALUE (TSC2005_CFR2_MAVE_X | \ + TSC2005_CFR2_MAVE_Y | \ + TSC2005_CFR2_MAVE_Z | \ + TSC2005_CFR2_MEDIUM_15 | \ + TSC2005_CFR2_AVG_7) + +#define MAX_12BIT 0xfff +#define TSC2005_SPI_MAX_SPEED_HZ 10000000 +#define TSC2005_PENUP_TIME_MS 40 + +struct tsc2005_spi_rd { + struct spi_transfer spi_xfer; + u32 spi_tx; + u32 spi_rx; +}; + +struct tsc2005 { + struct spi_device *spi; + + struct spi_message spi_read_msg; + struct tsc2005_spi_rd spi_x; + struct tsc2005_spi_rd spi_y; + struct tsc2005_spi_rd spi_z1; + struct tsc2005_spi_rd spi_z2; + + struct input_dev *idev; + char phys[32]; + + struct mutex mutex; + + /* raw copy of previous x,y,z */ + int in_x; + int in_y; + int in_z1; + int in_z2; + + spinlock_t lock; + struct timer_list penup_timer; + + unsigned int esd_timeout; + struct delayed_work esd_work; + unsigned long last_valid_interrupt; + + unsigned int x_plate_ohm; + + bool opened; + bool suspended; + + bool pen_down; + + void (*set_reset)(bool enable); +}; + +static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd) +{ + u8 tx = TSC2005_CMD | TSC2005_CMD_12BIT | cmd; + struct spi_transfer xfer = { + .tx_buf = &tx, + .len = 1, + .bits_per_word = 8, + }; + struct spi_message msg; + int error; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + error = spi_sync(ts->spi, &msg); + if (error) { + dev_err(&ts->spi->dev, "%s: failed, command: %x, error: %d\n", + __func__, cmd, error); + return error; + } + + return 0; +} + +static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value) +{ + u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value; + struct spi_transfer xfer = { + .tx_buf = &tx, + .len = 4, + .bits_per_word = 24, + }; + struct spi_message msg; + int error; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + error = spi_sync(ts->spi, &msg); + if (error) { + dev_err(&ts->spi->dev, + "%s: failed, register: %x, value: %x, error: %d\n", + __func__, reg, value, error); + return error; + } + + return 0; +} + +static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last) +{ + memset(rd, 0, sizeof(*rd)); + + rd->spi_tx = (reg | TSC2005_REG_READ) << 16; + rd->spi_xfer.tx_buf = &rd->spi_tx; + rd->spi_xfer.rx_buf = &rd->spi_rx; + rd->spi_xfer.len = 4; + rd->spi_xfer.bits_per_word = 24; + rd->spi_xfer.cs_change = !last; +} + +static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value) +{ + struct tsc2005_spi_rd spi_rd; + struct spi_message msg; + int error; + + tsc2005_setup_read(&spi_rd, reg, true); + + spi_message_init(&msg); + spi_message_add_tail(&spi_rd.spi_xfer, &msg); + + error = spi_sync(ts->spi, &msg); + if (error) + return error; + + *value = spi_rd.spi_rx; + return 0; +} + +static void tsc2005_update_pen_state(struct tsc2005 *ts, + int x, int y, int pressure) +{ + if (pressure) { + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, pressure); + if (!ts->pen_down) { + input_report_key(ts->idev, BTN_TOUCH, !!pressure); + ts->pen_down = true; + } + } else { + input_report_abs(ts->idev, ABS_PRESSURE, 0); + if (ts->pen_down) { + input_report_key(ts->idev, BTN_TOUCH, 0); + ts->pen_down = false; + } + } + input_sync(ts->idev); + dev_dbg(&ts->spi->dev, "point(%4d,%4d), pressure (%4d)\n", x, y, + pressure); +} + +static irqreturn_t tsc2005_irq_thread(int irq, void *_ts) +{ + struct tsc2005 *ts = _ts; + unsigned long flags; + unsigned int pressure; + u32 x, y; + u32 z1, z2; + int error; + + /* read the coordinates */ + error = spi_sync(ts->spi, &ts->spi_read_msg); + if (unlikely(error)) + goto out; + + x = ts->spi_x.spi_rx; + y = ts->spi_y.spi_rx; + z1 = ts->spi_z1.spi_rx; + z2 = ts->spi_z2.spi_rx; + + /* validate position */ + if (unlikely(x > MAX_12BIT || y > MAX_12BIT)) + goto out; + + /* Skip reading if the pressure components are out of range */ + if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2)) + goto out; + + /* + * Skip point if this is a pen down with the exact same values as + * the value before pen-up - that implies SPI fed us stale data + */ + if (!ts->pen_down && + ts->in_x == x && ts->in_y == y && + ts->in_z1 == z1 && ts->in_z2 == z2) { + goto out; + } + + /* + * At this point we are happy we have a valid and useful reading. + * Remember it for later comparisons. We may now begin downsampling. + */ + ts->in_x = x; + ts->in_y = y; + ts->in_z1 = z1; + ts->in_z2 = z2; + + /* Compute touch pressure resistance using equation #1 */ + pressure = x * (z2 - z1) / z1; + pressure = pressure * ts->x_plate_ohm / 4096; + if (unlikely(pressure > MAX_12BIT)) + goto out; + + spin_lock_irqsave(&ts->lock, flags); + + tsc2005_update_pen_state(ts, x, y, pressure); + mod_timer(&ts->penup_timer, + jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS)); + + spin_unlock_irqrestore(&ts->lock, flags); + + ts->last_valid_interrupt = jiffies; +out: + return IRQ_HANDLED; +} + +static void tsc2005_penup_timer(unsigned long data) +{ + struct tsc2005 *ts = (struct tsc2005 *)data; + unsigned long flags; + + spin_lock_irqsave(&ts->lock, flags); + tsc2005_update_pen_state(ts, 0, 0, 0); + spin_unlock_irqrestore(&ts->lock, flags); +} + +static void tsc2005_start_scan(struct tsc2005 *ts) +{ + tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); + tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); + tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); + tsc2005_cmd(ts, TSC2005_CMD_NORMAL); +} + +static void tsc2005_stop_scan(struct tsc2005 *ts) +{ + tsc2005_cmd(ts, TSC2005_CMD_STOP); +} + +/* must be called with ts->mutex held */ +static void __tsc2005_disable(struct tsc2005 *ts) +{ + tsc2005_stop_scan(ts); + + disable_irq(ts->spi->irq); + del_timer_sync(&ts->penup_timer); + + cancel_delayed_work_sync(&ts->esd_work); + + enable_irq(ts->spi->irq); +} + +/* must be called with ts->mutex held */ +static void __tsc2005_enable(struct tsc2005 *ts) +{ + tsc2005_start_scan(ts); + + if (ts->esd_timeout && ts->set_reset) { + ts->last_valid_interrupt = jiffies; + schedule_delayed_work(&ts->esd_work, + round_jiffies_relative( + msecs_to_jiffies(ts->esd_timeout))); + } + +} + +static ssize_t tsc2005_selftest_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct spi_device *spi = to_spi_device(dev); + struct tsc2005 *ts = spi_get_drvdata(spi); + u16 temp_high; + u16 temp_high_orig; + u16 temp_high_test; + bool success = true; + int error; + + mutex_lock(&ts->mutex); + + /* + * Test TSC2005 communications via temp high register. + */ + __tsc2005_disable(ts); + + error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig); + if (error) { + dev_warn(dev, "selftest failed: read error %d\n", error); + success = false; + goto out; + } + + temp_high_test = (temp_high_orig - 1) & MAX_12BIT; + + error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test); + if (error) { + dev_warn(dev, "selftest failed: write error %d\n", error); + success = false; + goto out; + } + + error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); + if (error) { + dev_warn(dev, "selftest failed: read error %d after write\n", + error); + success = false; + goto out; + } + + if (temp_high != temp_high_test) { + dev_warn(dev, "selftest failed: %d != %d\n", + temp_high, temp_high_test); + success = false; + } + + /* hardware reset */ + ts->set_reset(false); + usleep_range(100, 500); /* only 10us required */ + ts->set_reset(true); + + if (!success) + goto out; + + /* test that the reset really happened */ + error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); + if (error) { + dev_warn(dev, "selftest failed: read error %d after reset\n", + error); + success = false; + goto out; + } + + if (temp_high != temp_high_orig) { + dev_warn(dev, "selftest failed after reset: %d != %d\n", + temp_high, temp_high_orig); + success = false; + } + +out: + __tsc2005_enable(ts); + mutex_unlock(&ts->mutex); + + return sprintf(buf, "%d\n", success); +} + +static DEVICE_ATTR(selftest, S_IRUGO, tsc2005_selftest_show, NULL); + +static struct attribute *tsc2005_attrs[] = { + &dev_attr_selftest.attr, + NULL +}; + +static umode_t tsc2005_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct spi_device *spi = to_spi_device(dev); + struct tsc2005 *ts = spi_get_drvdata(spi); + umode_t mode = attr->mode; + + if (attr == &dev_attr_selftest.attr) { + if (!ts->set_reset) + mode = 0; + } + + return mode; +} + +static const struct attribute_group tsc2005_attr_group = { + .is_visible = tsc2005_attr_is_visible, + .attrs = tsc2005_attrs, +}; + +static void tsc2005_esd_work(struct work_struct *work) +{ + struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work); + int error; + u16 r; + + if (!mutex_trylock(&ts->mutex)) { + /* + * If the mutex is taken, it means that disable or enable is in + * progress. In that case just reschedule the work. If the work + * is not needed, it will be canceled by disable. + */ + goto reschedule; + } + + if (time_is_after_jiffies(ts->last_valid_interrupt + + msecs_to_jiffies(ts->esd_timeout))) + goto out; + + /* We should be able to read register without disabling interrupts. */ + error = tsc2005_read(ts, TSC2005_REG_CFR0, &r); + if (!error && + !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) { + goto out; + } + + /* + * If we could not read our known value from configuration register 0 + * then we should reset the controller as if from power-up and start + * scanning again. + */ + dev_info(&ts->spi->dev, "TSC2005 not responding - resetting\n"); + + disable_irq(ts->spi->irq); + del_timer_sync(&ts->penup_timer); + + tsc2005_update_pen_state(ts, 0, 0, 0); + + ts->set_reset(false); + usleep_range(100, 500); /* only 10us required */ + ts->set_reset(true); + + enable_irq(ts->spi->irq); + tsc2005_start_scan(ts); + +out: + mutex_unlock(&ts->mutex); +reschedule: + /* re-arm the watchdog */ + schedule_delayed_work(&ts->esd_work, + round_jiffies_relative( + msecs_to_jiffies(ts->esd_timeout))); +} + +static int tsc2005_open(struct input_dev *input) +{ + struct tsc2005 *ts = input_get_drvdata(input); + + mutex_lock(&ts->mutex); + + if (!ts->suspended) + __tsc2005_enable(ts); + + ts->opened = true; + + mutex_unlock(&ts->mutex); + + return 0; +} + +static void tsc2005_close(struct input_dev *input) +{ + struct tsc2005 *ts = input_get_drvdata(input); + + mutex_lock(&ts->mutex); + + if (!ts->suspended) + __tsc2005_disable(ts); + + ts->opened = false; + + mutex_unlock(&ts->mutex); +} + +static void __devinit tsc2005_setup_spi_xfer(struct tsc2005 *ts) +{ + tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false); + tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false); + tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false); + tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true); + + spi_message_init(&ts->spi_read_msg); + spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg); + spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg); + spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg); + spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg); +} + +static int __devinit tsc2005_probe(struct spi_device *spi) +{ + const struct tsc2005_platform_data *pdata = spi->dev.platform_data; + struct tsc2005 *ts; + struct input_dev *input_dev; + unsigned int max_x, max_y, max_p; + unsigned int fudge_x, fudge_y, fudge_p; + int error; + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data\n"); + return -ENODEV; + } + + fudge_x = pdata->ts_x_fudge ? : 4; + fudge_y = pdata->ts_y_fudge ? : 8; + fudge_p = pdata->ts_pressure_fudge ? : 2; + max_x = pdata->ts_x_max ? : MAX_12BIT; + max_y = pdata->ts_y_max ? : MAX_12BIT; + max_p = pdata->ts_pressure_max ? : MAX_12BIT; + + if (spi->irq <= 0) { + dev_dbg(&spi->dev, "no irq\n"); + return -ENODEV; + } + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + if (!spi->max_speed_hz) + spi->max_speed_hz = TSC2005_SPI_MAX_SPEED_HZ; + + error = spi_setup(spi); + if (error) + return error; + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + ts->spi = spi; + ts->idev = input_dev; + + ts->x_plate_ohm = pdata->ts_x_plate_ohm ? : 280; + ts->esd_timeout = pdata->esd_timeout_ms; + ts->set_reset = pdata->set_reset; + + mutex_init(&ts->mutex); + + spin_lock_init(&ts->lock); + setup_timer(&ts->penup_timer, tsc2005_penup_timer, (unsigned long)ts); + + INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work); + + tsc2005_setup_spi_xfer(ts); + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input-ts", dev_name(&spi->dev)); + + input_dev->name = "TSC2005 touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_SPI; + input_dev->dev.parent = &spi->dev; + input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0); + input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0); + + input_dev->open = tsc2005_open; + input_dev->close = tsc2005_close; + + input_set_drvdata(input_dev, ts); + + /* Ensure the touchscreen is off */ + tsc2005_stop_scan(ts); + + error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread, + IRQF_TRIGGER_RISING, "tsc2005", ts); + if (error) { + dev_err(&spi->dev, "Failed to request irq, err: %d\n", error); + goto err_free_mem; + } + + spi_set_drvdata(spi, ts); + error = sysfs_create_group(&spi->dev.kobj, &tsc2005_attr_group); + if (error) { + dev_err(&spi->dev, + "Failed to create sysfs attributes, err: %d\n", error); + goto err_clear_drvdata; + } + + error = input_register_device(ts->idev); + if (error) { + dev_err(&spi->dev, + "Failed to register input device, err: %d\n", error); + goto err_remove_sysfs; + } + + irq_set_irq_wake(spi->irq, 1); + return 0; + +err_remove_sysfs: + sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group); +err_clear_drvdata: + spi_set_drvdata(spi, NULL); + free_irq(spi->irq, ts); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + return error; +} + +static int __devexit tsc2005_remove(struct spi_device *spi) +{ + struct tsc2005 *ts = spi_get_drvdata(spi); + + sysfs_remove_group(&ts->spi->dev.kobj, &tsc2005_attr_group); + + free_irq(ts->spi->irq, ts); + input_unregister_device(ts->idev); + kfree(ts); + + spi_set_drvdata(spi, NULL); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tsc2005_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct tsc2005 *ts = spi_get_drvdata(spi); + + mutex_lock(&ts->mutex); + + if (!ts->suspended && ts->opened) + __tsc2005_disable(ts); + + ts->suspended = true; + + mutex_unlock(&ts->mutex); + + return 0; +} + +static int tsc2005_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct tsc2005 *ts = spi_get_drvdata(spi); + + mutex_lock(&ts->mutex); + + if (ts->suspended && ts->opened) + __tsc2005_enable(ts); + + ts->suspended = false; + + mutex_unlock(&ts->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(tsc2005_pm_ops, tsc2005_suspend, tsc2005_resume); + +static struct spi_driver tsc2005_driver = { + .driver = { + .name = "tsc2005", + .owner = THIS_MODULE, + .pm = &tsc2005_pm_ops, + }, + .probe = tsc2005_probe, + .remove = __devexit_p(tsc2005_remove), +}; + +module_spi_driver(tsc2005_driver); + +MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>"); +MODULE_DESCRIPTION("TSC2005 Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/tsc2007.c b/ANDROID_3.4.5/drivers/input/touchscreen/tsc2007.c new file mode 100644 index 00000000..1473d238 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/tsc2007.c @@ -0,0 +1,406 @@ +/* + * drivers/input/touchscreen/tsc2007.c + * + * Copyright (c) 2008 MtekVision Co., Ltd. + * Kwangwoo Lee <kwlee@mtekvision.com> + * + * Using code from: + * - ads7846.c + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { + u16 x; + u16 y; + u16 z1, z2; +}; + +struct tsc2007 { + struct input_dev *input; + char phys[32]; + + struct i2c_client *client; + + u16 model; + u16 x_plate_ohms; + u16 max_rt; + unsigned long poll_delay; + unsigned long poll_period; + + int irq; + + wait_queue_head_t wait; + bool stopped; + + int (*get_pendown_state)(void); + void (*clear_penirq)(void); +}; + +static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +{ + s32 data; + u16 val; + + data = i2c_smbus_read_word_data(tsc->client, cmd); + if (data < 0) { + dev_err(&tsc->client->dev, "i2c io error: %d\n", data); + return data; + } + + /* The protocol and raw data format from i2c interface: + * S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P + * Where DataLow has [D11-D4], DataHigh has [D3-D0 << 4 | Dummy 4bit]. + */ + val = swab16(data) >> 4; + + dev_dbg(&tsc->client->dev, "data: 0x%x, val: 0x%x\n", data, val); + + return val; +} + +static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) +{ + /* y- still on; turn on only y+ (and ADC) */ + tc->y = tsc2007_xfer(tsc, READ_Y); + + /* turn y- off, x+ on, then leave in lowpower */ + tc->x = tsc2007_xfer(tsc, READ_X); + + /* turn y+ off, x- on; we'll use formula #1 */ + tc->z1 = tsc2007_xfer(tsc, READ_Z1); + tc->z2 = tsc2007_xfer(tsc, READ_Z2); + + /* Prepare for next touch reading - power down ADC, enable PENIRQ */ + tsc2007_xfer(tsc, PWRDOWN); +} + +static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) +{ + u32 rt = 0; + + /* range filtering */ + if (tc->x == MAX_12BIT) + tc->x = 0; + + if (likely(tc->x && tc->z1)) { + /* compute touch pressure resistance using equation #1 */ + rt = tc->z2 - tc->z1; + rt *= tc->x; + rt *= tsc->x_plate_ohms; + rt /= tc->z1; + rt = (rt + 2047) >> 12; + } + + return rt; +} + +static bool tsc2007_is_pen_down(struct tsc2007 *ts) +{ + /* + * NOTE: We can't rely on the pressure to determine the pen down + * state, even though this controller has a pressure sensor. + * The pressure value can fluctuate for quite a while after + * lifting the pen and in some cases may not even settle at the + * expected value. + * + * The only safe way to check for the pen up condition is in the + * work function by reading the pen signal state (it's a GPIO + * and IRQ). Unfortunately such callback is not always available, + * in that case we assume that the pen is down and expect caller + * to fall back on the pressure reading. + */ + + if (!ts->get_pendown_state) + return true; + + return ts->get_pendown_state(); +} + +static irqreturn_t tsc2007_soft_irq(int irq, void *handle) +{ + struct tsc2007 *ts = handle; + struct input_dev *input = ts->input; + struct ts_event tc; + u32 rt; + + while (!ts->stopped && tsc2007_is_pen_down(ts)) { + + /* pen is down, continue with the measurement */ + tsc2007_read_values(ts, &tc); + + rt = tsc2007_calculate_pressure(ts, &tc); + + if (rt == 0 && !ts->get_pendown_state) { + /* + * If pressure reported is 0 and we don't have + * callback to check pendown state, we have to + * assume that pen was lifted up. + */ + break; + } + + if (rt <= ts->max_rt) { + dev_dbg(&ts->client->dev, + "DOWN point(%4d,%4d), pressure (%4u)\n", + tc.x, tc.y, rt); + + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, tc.x); + input_report_abs(input, ABS_Y, tc.y); + input_report_abs(input, ABS_PRESSURE, rt); + + input_sync(input); + + } else { + /* + * Sample found inconsistent by debouncing or pressure is + * beyond the maximum. Don't report it to user space, + * repeat at least once more the measurement. + */ + dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); + } + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(ts->poll_period)); + } + + dev_dbg(&ts->client->dev, "UP\n"); + + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); + + if (ts->clear_penirq) + ts->clear_penirq(); + + return IRQ_HANDLED; +} + +static irqreturn_t tsc2007_hard_irq(int irq, void *handle) +{ + struct tsc2007 *ts = handle; + + if (!ts->get_pendown_state || likely(ts->get_pendown_state())) + return IRQ_WAKE_THREAD; + + if (ts->clear_penirq) + ts->clear_penirq(); + + return IRQ_HANDLED; +} + +static void tsc2007_stop(struct tsc2007 *ts) +{ + ts->stopped = true; + mb(); + wake_up(&ts->wait); + + disable_irq(ts->irq); +} + +static int tsc2007_open(struct input_dev *input_dev) +{ + struct tsc2007 *ts = input_get_drvdata(input_dev); + int err; + + ts->stopped = false; + mb(); + + enable_irq(ts->irq); + + /* Prepare for touch readings - power down ADC and enable PENIRQ */ + err = tsc2007_xfer(ts, PWRDOWN); + if (err < 0) { + tsc2007_stop(ts); + return err; + } + + return 0; +} + +static void tsc2007_close(struct input_dev *input_dev) +{ + struct tsc2007 *ts = input_get_drvdata(input_dev); + + tsc2007_stop(ts); +} + +static int __devinit tsc2007_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tsc2007 *ts; + struct tsc2007_platform_data *pdata = client->dev.platform_data; + struct input_dev *input_dev; + int err; + + if (!pdata) { + dev_err(&client->dev, "platform data is required!\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -EIO; + + ts = kzalloc(sizeof(struct tsc2007), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + ts->client = client; + ts->irq = client->irq; + ts->input = input_dev; + init_waitqueue_head(&ts->wait); + + ts->model = pdata->model; + ts->x_plate_ohms = pdata->x_plate_ohms; + ts->max_rt = pdata->max_rt ? : MAX_12BIT; + ts->poll_delay = pdata->poll_delay ? : 1; + ts->poll_period = pdata->poll_period ? : 1; + ts->get_pendown_state = pdata->get_pendown_state; + ts->clear_penirq = pdata->clear_penirq; + + if (pdata->x_plate_ohms == 0) { + dev_err(&client->dev, "x_plate_ohms is not set up in platform data"); + err = -EINVAL; + goto err_free_mem; + } + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input0", dev_name(&client->dev)); + + input_dev->name = "TSC2007 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + + input_dev->open = tsc2007_open; + input_dev->close = tsc2007_close; + + input_set_drvdata(input_dev, ts); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, pdata->fuzzx, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, pdata->fuzzy, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, + pdata->fuzzz, 0); + + if (pdata->init_platform_hw) + pdata->init_platform_hw(); + + err = request_threaded_irq(ts->irq, tsc2007_hard_irq, tsc2007_soft_irq, + IRQF_ONESHOT, client->dev.driver->name, ts); + if (err < 0) { + dev_err(&client->dev, "irq %d busy?\n", ts->irq); + goto err_free_mem; + } + + tsc2007_stop(ts); + + err = input_register_device(input_dev); + if (err) + goto err_free_irq; + + i2c_set_clientdata(client, ts); + + return 0; + + err_free_irq: + free_irq(ts->irq, ts); + if (pdata->exit_platform_hw) + pdata->exit_platform_hw(); + err_free_mem: + input_free_device(input_dev); + kfree(ts); + return err; +} + +static int __devexit tsc2007_remove(struct i2c_client *client) +{ + struct tsc2007 *ts = i2c_get_clientdata(client); + struct tsc2007_platform_data *pdata = client->dev.platform_data; + + free_irq(ts->irq, ts); + + if (pdata->exit_platform_hw) + pdata->exit_platform_hw(); + + input_unregister_device(ts->input); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id tsc2007_idtable[] = { + { "tsc2007", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, tsc2007_idtable); + +static struct i2c_driver tsc2007_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tsc2007" + }, + .id_table = tsc2007_idtable, + .probe = tsc2007_probe, + .remove = __devexit_p(tsc2007_remove), +}; + +module_i2c_driver(tsc2007_driver); + +MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>"); +MODULE_DESCRIPTION("TSC2007 TouchScreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/tsc40.c b/ANDROID_3.4.5/drivers/input/touchscreen/tsc40.c new file mode 100644 index 00000000..29d5ed4d --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/tsc40.c @@ -0,0 +1,184 @@ +/* + * TSC-40 serial touchscreen driver. It should be compatible with + * TSC-10 and 25. + * + * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * License: GPLv2 as published by the FSF. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define PACKET_LENGTH 5 +struct tsc_ser { + struct input_dev *dev; + struct serio *serio; + u32 idx; + unsigned char data[PACKET_LENGTH]; + char phys[32]; +}; + +static void tsc_process_data(struct tsc_ser *ptsc) +{ + struct input_dev *dev = ptsc->dev; + u8 *data = ptsc->data; + u32 x; + u32 y; + + x = ((data[1] & 0x03) << 8) | data[2]; + y = ((data[3] & 0x03) << 8) | data[4]; + + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_report_key(dev, BTN_TOUCH, 1); + + input_sync(dev); +} + +static irqreturn_t tsc_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct tsc_ser *ptsc = serio_get_drvdata(serio); + struct input_dev *dev = ptsc->dev; + + ptsc->data[ptsc->idx] = data; + switch (ptsc->idx++) { + case 0: + if (unlikely((data & 0x3e) != 0x10)) { + dev_dbg(&serio->dev, + "unsynchronized packet start (0x%02x)\n", data); + ptsc->idx = 0; + } else if (!(data & 0x01)) { + input_report_key(dev, BTN_TOUCH, 0); + input_sync(dev); + ptsc->idx = 0; + } + break; + + case 1: + case 3: + if (unlikely(data & 0xfc)) { + dev_dbg(&serio->dev, + "unsynchronized data 0x%02x at offset %d\n", + data, ptsc->idx - 1); + ptsc->idx = 0; + } + break; + + case 4: + tsc_process_data(ptsc); + ptsc->idx = 0; + break; + } + + return IRQ_HANDLED; +} + +static int tsc_connect(struct serio *serio, struct serio_driver *drv) +{ + struct tsc_ser *ptsc; + struct input_dev *input_dev; + int error; + + ptsc = kzalloc(sizeof(struct tsc_ser), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ptsc || !input_dev) { + error = -ENOMEM; + goto fail1; + } + + ptsc->serio = serio; + ptsc->dev = input_dev; + snprintf(ptsc->phys, sizeof(ptsc->phys), "%s/input0", serio->phys); + + input_dev->name = "TSC-10/25/40 Serial TouchScreen"; + input_dev->phys = ptsc->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TSC40; + input_dev->id.product = 40; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); + input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); + input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0); + + serio_set_drvdata(serio, ptsc); + + error = serio_open(serio, drv); + if (error) + goto fail2; + + error = input_register_device(ptsc->dev); + if (error) + goto fail3; + + return 0; + +fail3: + serio_close(serio); +fail2: + serio_set_drvdata(serio, NULL); +fail1: + input_free_device(input_dev); + kfree(ptsc); + return error; +} + +static void tsc_disconnect(struct serio *serio) +{ + struct tsc_ser *ptsc = serio_get_drvdata(serio); + + serio_close(serio); + + input_unregister_device(ptsc->dev); + kfree(ptsc); + + serio_set_drvdata(serio, NULL); +} + +static struct serio_device_id tsc_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TSC40, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; +MODULE_DEVICE_TABLE(serio, tsc_serio_ids); + +#define DRIVER_DESC "TSC-10/25/40 serial touchscreen driver" + +static struct serio_driver tsc_drv = { + .driver = { + .name = "tsc40", + }, + .description = DRIVER_DESC, + .id_table = tsc_serio_ids, + .interrupt = tsc_interrupt, + .connect = tsc_connect, + .disconnect = tsc_disconnect, +}; + +static int __init tsc_ser_init(void) +{ + return serio_register_driver(&tsc_drv); +} +module_init(tsc_ser_init); + +static void __exit tsc_exit(void) +{ + serio_unregister_driver(&tsc_drv); +} +module_exit(tsc_exit); + +MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ucb1400_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/ucb1400_ts.c new file mode 100644 index 00000000..46e83ad5 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/ucb1400_ts.c @@ -0,0 +1,467 @@ +/* + * Philips UCB1400 touchscreen driver + * + * Author: Nicolas Pitre + * Created: September 25, 2006 + * Copyright: MontaVista Software, Inc. + * + * Spliting done by: Marek Vasut <marek.vasut@gmail.com> + * If something doesn't work and it worked before spliting, e-mail me, + * dont bother Nicolas please ;-) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is heavily based on ucb1x00-*.c copyrighted by Russell King + * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has + * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/input.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/ucb1400.h> + +#define UCB1400_TS_POLL_PERIOD 10 /* ms */ + +static bool adcsync; +static int ts_delay = 55; /* us */ +static int ts_delay_pressure; /* us */ + +/* Switch to interrupt mode. */ +static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | + UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | + UCB_TS_CR_MODE_INT); +} + +/* + * Switch to pressure mode, and read pressure. We don't need to wait + * here, since both plates are being driven. + */ +static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | + UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + + udelay(ts_delay_pressure); + + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync); +} + +/* + * Switch to X position mode and measure Y plate. We switch the plate + * configuration in pressure mode, then switch to position mode. This + * gives a faster response time. Even so, we need to wait about 55us + * for things to stabilise. + */ +static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | + UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); + + udelay(ts_delay); + + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync); +} + +/* + * Switch to Y position mode and measure X plate. We switch the plate + * configuration in pressure mode, then switch to position mode. This + * gives a faster response time. Even so, we need to wait about 55us + * for things to stabilise. + */ +static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | + UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); + + udelay(ts_delay); + + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync); +} + +/* + * Switch to X plate resistance mode. Set MX to ground, PX to + * supply. Measure current. + */ +static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + return ucb1400_adc_read(ucb->ac97, 0, adcsync); +} + +/* + * Switch to Y plate resistance mode. Set MY to ground, PY to + * supply. Measure current. + */ +static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, + UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | + UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + return ucb1400_adc_read(ucb->ac97, 0, adcsync); +} + +static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb) +{ + unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR); + + return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW); +} + +static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX); +} + +static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb) +{ + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0); +} + +static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y) +{ + input_report_abs(idev, ABS_X, x); + input_report_abs(idev, ABS_Y, y); + input_report_abs(idev, ABS_PRESSURE, pressure); + input_report_key(idev, BTN_TOUCH, 1); + input_sync(idev); +} + +static void ucb1400_ts_event_release(struct input_dev *idev) +{ + input_report_abs(idev, ABS_PRESSURE, 0); + input_report_key(idev, BTN_TOUCH, 0); + input_sync(idev); +} + +static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb) +{ + unsigned int isr; + + isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); + + if (isr & UCB_IE_TSPX) + ucb1400_ts_irq_disable(ucb); + else + dev_dbg(&ucb->ts_idev->dev, + "ucb1400: unexpected IE_STATUS = %#x\n", isr); +} + +/* + * A restriction with interrupts exists when using the ucb1400, as + * the codec read/write routines may sleep while waiting for codec + * access completion and uses semaphores for access control to the + * AC97 bus. Therefore the driver is forced to use threaded interrupt + * handler. + */ +static irqreturn_t ucb1400_irq(int irqnr, void *devid) +{ + struct ucb1400_ts *ucb = devid; + unsigned int x, y, p; + bool penup; + + if (unlikely(irqnr != ucb->irq)) + return IRQ_NONE; + + ucb1400_clear_pending_irq(ucb); + + /* Start with a small delay before checking pendown state */ + msleep(UCB1400_TS_POLL_PERIOD); + + while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) { + + ucb1400_adc_enable(ucb->ac97); + x = ucb1400_ts_read_xpos(ucb); + y = ucb1400_ts_read_ypos(ucb); + p = ucb1400_ts_read_pressure(ucb); + ucb1400_adc_disable(ucb->ac97); + + ucb1400_ts_report_event(ucb->ts_idev, p, x, y); + + wait_event_timeout(ucb->ts_wait, ucb->stopped, + msecs_to_jiffies(UCB1400_TS_POLL_PERIOD)); + } + + ucb1400_ts_event_release(ucb->ts_idev); + + if (!ucb->stopped) { + /* Switch back to interrupt mode. */ + ucb1400_ts_mode_int(ucb); + ucb1400_ts_irq_enable(ucb); + } + + return IRQ_HANDLED; +} + +static void ucb1400_ts_stop(struct ucb1400_ts *ucb) +{ + /* Signal IRQ thread to stop polling and disable the handler. */ + ucb->stopped = true; + mb(); + wake_up(&ucb->ts_wait); + disable_irq(ucb->irq); + + ucb1400_ts_irq_disable(ucb); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0); +} + +/* Must be called with ts->lock held */ +static void ucb1400_ts_start(struct ucb1400_ts *ucb) +{ + /* Tell IRQ thread that it may poll the device. */ + ucb->stopped = false; + mb(); + + ucb1400_ts_mode_int(ucb); + ucb1400_ts_irq_enable(ucb); + + enable_irq(ucb->irq); +} + +static int ucb1400_ts_open(struct input_dev *idev) +{ + struct ucb1400_ts *ucb = input_get_drvdata(idev); + + ucb1400_ts_start(ucb); + + return 0; +} + +static void ucb1400_ts_close(struct input_dev *idev) +{ + struct ucb1400_ts *ucb = input_get_drvdata(idev); + + ucb1400_ts_stop(ucb); +} + +#ifndef NO_IRQ +#define NO_IRQ 0 +#endif + +/* + * Try to probe our interrupt, rather than relying on lots of + * hard-coded machine dependencies. + */ +static int __devinit ucb1400_ts_detect_irq(struct ucb1400_ts *ucb, + struct platform_device *pdev) +{ + unsigned long mask, timeout; + + mask = probe_irq_on(); + + /* Enable the ADC interrupt. */ + ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); + + /* Cause an ADC interrupt. */ + ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA); + ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START); + + /* Wait for the conversion to complete. */ + timeout = jiffies + HZ/2; + while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) & + UCB_ADC_DAT_VALID)) { + cpu_relax(); + if (time_after(jiffies, timeout)) { + dev_err(&pdev->dev, "timed out in IRQ probe\n"); + probe_irq_off(mask); + return -ENODEV; + } + } + ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0); + + /* Disable and clear interrupt. */ + ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); + + /* Read triggered interrupt. */ + ucb->irq = probe_irq_off(mask); + if (ucb->irq < 0 || ucb->irq == NO_IRQ) + return -ENODEV; + + return 0; +} + +static int __devinit ucb1400_ts_probe(struct platform_device *pdev) +{ + struct ucb1400_ts *ucb = pdev->dev.platform_data; + int error, x_res, y_res; + u16 fcsr; + + ucb->ts_idev = input_allocate_device(); + if (!ucb->ts_idev) { + error = -ENOMEM; + goto err; + } + + /* Only in case the IRQ line wasn't supplied, try detecting it */ + if (ucb->irq < 0) { + error = ucb1400_ts_detect_irq(ucb, pdev); + if (error) { + dev_err(&pdev->dev, "IRQ probe failed\n"); + goto err_free_devs; + } + } + dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq); + + init_waitqueue_head(&ucb->ts_wait); + + input_set_drvdata(ucb->ts_idev, ucb); + + ucb->ts_idev->dev.parent = &pdev->dev; + ucb->ts_idev->name = "UCB1400 touchscreen interface"; + ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97, + AC97_VENDOR_ID1); + ucb->ts_idev->id.product = ucb->id; + ucb->ts_idev->open = ucb1400_ts_open; + ucb->ts_idev->close = ucb1400_ts_close; + ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); + ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + /* + * Enable ADC filter to prevent horrible jitter on Colibri. + * This also further reduces jitter on boards where ADCSYNC + * pin is connected. + */ + fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR); + ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE); + + ucb1400_adc_enable(ucb->ac97); + x_res = ucb1400_ts_read_xres(ucb); + y_res = ucb1400_ts_read_yres(ucb); + ucb1400_adc_disable(ucb->ac97); + dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res); + + input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0); + input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0); + input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0); + + ucb1400_ts_stop(ucb); + + error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "UCB1400", ucb); + if (error) { + dev_err(&pdev->dev, + "unable to grab irq%d: %d\n", ucb->irq, error); + goto err_free_devs; + } + + error = input_register_device(ucb->ts_idev); + if (error) + goto err_free_irq; + + return 0; + +err_free_irq: + free_irq(ucb->irq, ucb); +err_free_devs: + input_free_device(ucb->ts_idev); +err: + return error; +} + +static int __devexit ucb1400_ts_remove(struct platform_device *pdev) +{ + struct ucb1400_ts *ucb = pdev->dev.platform_data; + + free_irq(ucb->irq, ucb); + input_unregister_device(ucb->ts_idev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ucb1400_ts_suspend(struct device *dev) +{ + struct ucb1400_ts *ucb = dev->platform_data; + struct input_dev *idev = ucb->ts_idev; + + mutex_lock(&idev->mutex); + + if (idev->users) + ucb1400_ts_start(ucb); + + mutex_unlock(&idev->mutex); + return 0; +} + +static int ucb1400_ts_resume(struct device *dev) +{ + struct ucb1400_ts *ucb = dev->platform_data; + struct input_dev *idev = ucb->ts_idev; + + mutex_lock(&idev->mutex); + + if (idev->users) + ucb1400_ts_stop(ucb); + + mutex_unlock(&idev->mutex); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops, + ucb1400_ts_suspend, ucb1400_ts_resume); + +static struct platform_driver ucb1400_ts_driver = { + .probe = ucb1400_ts_probe, + .remove = __devexit_p(ucb1400_ts_remove), + .driver = { + .name = "ucb1400_ts", + .owner = THIS_MODULE, + .pm = &ucb1400_ts_pm_ops, + }, +}; +module_platform_driver(ucb1400_ts_driver); + +module_param(adcsync, bool, 0444); +MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin."); + +module_param(ts_delay, int, 0444); +MODULE_PARM_DESC(ts_delay, "Delay between panel setup and" + " position read. Default = 55us."); + +module_param(ts_delay_pressure, int, 0444); +MODULE_PARM_DESC(ts_delay_pressure, + "delay between panel setup and pressure read." + " Default = 0us."); + +MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/usbtouchscreen.c b/ANDROID_3.4.5/drivers/input/touchscreen/usbtouchscreen.c new file mode 100644 index 00000000..22cd96f5 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/usbtouchscreen.c @@ -0,0 +1,1690 @@ +/****************************************************************************** + * usbtouchscreen.c + * Driver for USB Touchscreens, supporting those devices: + * - eGalax Touchkit + * includes eTurboTouch CT-410/510/700 + * - 3M/Microtouch EX II series + * - ITM + * - PanJit TouchSet + * - eTurboTouch + * - Gunze AHL61 + * - DMC TSC-10/25 + * - IRTOUCHSYSTEMS/UNITOP + * - IdealTEK URTC1000 + * - General Touch + * - GoTop Super_Q2/GogoPen/PenPower tablets + * - JASTEC USB touch controller/DigiTech DTR-02U + * - Zytronic capacitive touchscreen + * - NEXIO/iNexio + * - Elo TouchSystems 2700 IntelliTouch + * - EasyTouch USB Dual/Multi touch controller from Data Modul + * + * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> + * Copyright (C) by Todd E. Johnson (mtouchusb.c) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Driver is based on touchkitusb.c + * - ITM parts are from itmtouch.c + * - 3M parts are from mtouchusb.c + * - PanJit parts are from an unmerged driver by Lanslott Gish + * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged + * driver from Marius Vollmer + * + *****************************************************************************/ + +//#define DEBUG + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <linux/hid.h> + + +#define DRIVER_VERSION "v0.6" +#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" +#define DRIVER_DESC "USB Touchscreen Driver" + +static bool swap_xy; +module_param(swap_xy, bool, 0644); +MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); + +static bool hwcalib_xy; +module_param(hwcalib_xy, bool, 0644); +MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available"); + +/* device specifc data/functions */ +struct usbtouch_usb; +struct usbtouch_device_info { + int min_xc, max_xc; + int min_yc, max_yc; + int min_press, max_press; + int rept_size; + + /* + * Always service the USB devices irq not just when the input device is + * open. This is useful when devices have a watchdog which prevents us + * from periodically polling the device. Leave this unset unless your + * touchscreen device requires it, as it does consume more of the USB + * bandwidth. + */ + bool irq_always; + + void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); + + /* + * used to get the packet len. possible return values: + * > 0: packet len + * = 0: skip one byte + * < 0: -return value more bytes needed + */ + int (*get_pkt_len) (unsigned char *pkt, int len); + + int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); + int (*alloc) (struct usbtouch_usb *usbtouch); + int (*init) (struct usbtouch_usb *usbtouch); + void (*exit) (struct usbtouch_usb *usbtouch); +}; + +/* a usbtouch device */ +struct usbtouch_usb { + unsigned char *data; + dma_addr_t data_dma; + unsigned char *buffer; + int buf_len; + struct urb *irq; + struct usb_interface *interface; + struct input_dev *input; + struct usbtouch_device_info *type; + char name[128]; + char phys[64]; + void *priv; + + int x, y; + int touch, press; +}; + + +/* device types */ +enum { + DEVTYPE_IGNORE = -1, + DEVTYPE_EGALAX, + DEVTYPE_PANJIT, + DEVTYPE_3M, + DEVTYPE_ITM, + DEVTYPE_ETURBO, + DEVTYPE_GUNZE, + DEVTYPE_DMC_TSC10, + DEVTYPE_IRTOUCH, + DEVTYPE_IDEALTEK, + DEVTYPE_GENERAL_TOUCH, + DEVTYPE_GOTOP, + DEVTYPE_JASTEC, + DEVTYPE_E2I, + DEVTYPE_ZYTRONIC, + DEVTYPE_TC45USB, + DEVTYPE_NEXIO, + DEVTYPE_ELO, + DEVTYPE_ETOUCH, +}; + +#define USB_DEVICE_HID_CLASS(vend, prod) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \ + | USB_DEVICE_ID_MATCH_INT_PROTOCOL \ + | USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = USB_INTERFACE_CLASS_HID, \ + .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE + +static const struct usb_device_id usbtouch_devices[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX + /* ignore the HID capable devices, handled by usbhid */ + {USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE}, + {USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE}, + + /* normal device IDs */ + {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT + {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT}, + {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT}, + {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT}, + {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_3M + {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ITM + {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, + {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO + {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE + {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 + {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, + {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK + {USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH + {USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP + {USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP}, + {USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP}, + {USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC + {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I + {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC + {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + /* TC5UH */ + {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB}, + /* TC4UM */ + {USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + /* data interface only */ + {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), + .driver_info = DEVTYPE_NEXIO}, + {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), + .driver_info = DEVTYPE_NEXIO}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH}, +#endif + + {} +}; + + +/***************************************************************************** + * e2i Part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I +static int e2i_init(struct usbtouch_usb *usbtouch) +{ + int ret; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x01, 0x02, 0x0000, 0x0081, + NULL, 0, USB_CTRL_SET_TIMEOUT); + + dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d", + __func__, ret); + return ret; +} + +static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + int tmp = (pkt[0] << 8) | pkt[1]; + dev->x = (pkt[2] << 8) | pkt[3]; + dev->y = (pkt[4] << 8) | pkt[5]; + + tmp = tmp - 0xA000; + dev->touch = (tmp > 0); + dev->press = (tmp > 0 ? tmp : 0); + + return 1; +} +#endif + + +/***************************************************************************** + * eGalax part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define EGALAX_PKT_TYPE_MASK 0xFE +#define EGALAX_PKT_TYPE_REPT 0x80 +#define EGALAX_PKT_TYPE_DIAG 0x0A + +static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) + return 0; + + dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); + dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int egalax_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & EGALAX_PKT_TYPE_MASK) { + case EGALAX_PKT_TYPE_REPT: + return 5; + + case EGALAX_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} +#endif + +/***************************************************************************** + * EasyTouch part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define ETOUCH_PKT_TYPE_MASK 0xFE +#define ETOUCH_PKT_TYPE_REPT 0x80 +#define ETOUCH_PKT_TYPE_REPT2 0xB0 +#define ETOUCH_PKT_TYPE_DIAG 0x0A + +static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT && + (pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2) + return 0; + + dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int etouch_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & ETOUCH_PKT_TYPE_MASK) { + case ETOUCH_PKT_TYPE_REPT: + case ETOUCH_PKT_TYPE_REPT2: + return 5; + + case ETOUCH_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} +#endif + +/***************************************************************************** + * PanJit Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT +static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + + +/***************************************************************************** + * 3M/Microtouch Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_3M + +#define MTOUCHUSB_ASYNC_REPORT 1 +#define MTOUCHUSB_RESET 7 +#define MTOUCHUSB_REQ_CTRLLR_ID 10 + +static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if (hwcalib_xy) { + dev->x = (pkt[4] << 8) | pkt[3]; + dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]); + } else { + dev->x = (pkt[8] << 8) | pkt[7]; + dev->y = (pkt[10] << 8) | pkt[9]; + } + dev->touch = (pkt[2] & 0x40) ? 1 : 0; + + return 1; +} + +static int mtouch_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + MTOUCHUSB_RESET, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d", + __func__, ret); + if (ret < 0) + return ret; + msleep(150); + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + MTOUCHUSB_ASYNC_REPORT, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); + dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", + __func__, ret); + if (ret >= 0) + break; + if (ret != -EPIPE) + return ret; + } + + /* Default min/max xy are the raw values, override if using hw-calib */ + if (hwcalib_xy) { + input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0); + input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0); + } + + return 0; +} +#endif + + +/***************************************************************************** + * ITM Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ITM +static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + int touch; + /* + * ITM devices report invalid x/y data if not touched. + * if the screen was touched before but is not touched any more + * report touch as 0 with the last valid x/y data once. then stop + * reporting data until touched again. + */ + dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); + + touch = ~pkt[7] & 0x20; + if (!touch) { + if (dev->touch) { + dev->touch = 0; + return 1; + } + + return 0; + } + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = touch; + + return 1; +} +#endif + + +/***************************************************************************** + * eTurboTouch part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif +static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + unsigned int shift; + + /* packets should start with sync */ + if (!(pkt[0] & 0x80)) + return 0; + + shift = (6 - (pkt[0] & 0x03)); + dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; + dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; + dev->touch = (pkt[0] & 0x10) ? 1 : 0; + + return 1; +} + +static int eturbo_get_pkt_len(unsigned char *buf, int len) +{ + if (buf[0] & 0x80) + return 5; + if (buf[0] == 0x01) + return 3; + return 0; +} +#endif + + +/***************************************************************************** + * Gunze part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE +static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) + return 0; + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->touch = pkt[0] & 0x20; + + return 1; +} +#endif + +/***************************************************************************** + * DMC TSC-10/25 Part + * + * Documentation about the controller and it's protocol can be found at + * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf + * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf + */ +#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 + +/* supported data rates. currently using 130 */ +#define TSC10_RATE_POINT 0x50 +#define TSC10_RATE_30 0x40 +#define TSC10_RATE_50 0x41 +#define TSC10_RATE_80 0x42 +#define TSC10_RATE_100 0x43 +#define TSC10_RATE_130 0x44 +#define TSC10_RATE_150 0x45 + +/* commands */ +#define TSC10_CMD_RESET 0x55 +#define TSC10_CMD_RATE 0x05 +#define TSC10_CMD_DATA1 0x01 + +static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); + int ret = -ENOMEM; + unsigned char *buf; + + buf = kmalloc(2, GFP_NOIO); + if (!buf) + goto err_nobuf; + /* reset */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RESET, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + goto err_out; + if (buf[0] != 0x06) { + ret = -ENODEV; + goto err_out; + } + + /* set coordinate output rate */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RATE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + goto err_out; + if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) { + ret = -ENODEV; + goto err_out; + } + + /* start sending data */ + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_DATA1, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); +err_out: + kfree(buf); +err_nobuf: + return ret; +} + + +static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + + +/***************************************************************************** + * IRTOUCH Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH +static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = (pkt[1] & 0x03) ? 1 : 0; + + return 1; +} +#endif + +/***************************************************************************** + * ET&T TC5UH/TC4UM part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB +static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + +/***************************************************************************** + * IdealTEK URTC1000 Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif +static int idealtek_get_pkt_len(unsigned char *buf, int len) +{ + if (buf[0] & 0x80) + return 5; + if (buf[0] == 0x01) + return len; + return 0; +} + +static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + switch (pkt[0] & 0x98) { + case 0x88: + /* touch data in IdealTEK mode */ + dev->x = (pkt[1] << 5) | (pkt[2] >> 2); + dev->y = (pkt[3] << 5) | (pkt[4] >> 2); + dev->touch = (pkt[0] & 0x40) ? 1 : 0; + return 1; + + case 0x98: + /* touch data in MT emulation mode */ + dev->x = (pkt[2] << 5) | (pkt[1] >> 2); + dev->y = (pkt[4] << 5) | (pkt[3] >> 2); + dev->touch = (pkt[0] & 0x40) ? 1 : 0; + return 1; + + default: + return 0; + } +} +#endif + +/***************************************************************************** + * General Touch Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH +static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[2] << 8) | pkt[1]; + dev->y = (pkt[4] << 8) | pkt[3]; + dev->press = pkt[5] & 0xff; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + +/***************************************************************************** + * GoTop Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP +static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[1] & 0x38) << 4) | pkt[2]; + dev->y = ((pkt[1] & 0x07) << 7) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + +/***************************************************************************** + * JASTEC Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC +static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f); + dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f); + dev->touch = (pkt[0] & 0x40) >> 6; + + return 1; +} +#endif + +/***************************************************************************** + * Zytronic Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC +static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + switch (pkt[0]) { + case 0x3A: /* command response */ + dbg("%s: Command response %d", __func__, pkt[1]); + break; + + case 0xC0: /* down */ + dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); + dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); + dev->touch = 1; + dbg("%s: down %d,%d", __func__, dev->x, dev->y); + return 1; + + case 0x80: /* up */ + dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); + dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); + dev->touch = 0; + dbg("%s: up %d,%d", __func__, dev->x, dev->y); + return 1; + + default: + dbg("%s: Unknown return %d", __func__, pkt[0]); + break; + } + + return 0; +} +#endif + +/***************************************************************************** + * NEXIO Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + +#define NEXIO_TIMEOUT 5000 +#define NEXIO_BUFSIZE 1024 +#define NEXIO_THRESHOLD 50 + +struct nexio_priv { + struct urb *ack; + unsigned char *ack_buf; +}; + +struct nexio_touch_packet { + u8 flags; /* 0xe1 = touch, 0xe1 = release */ + __be16 data_len; /* total bytes of touch data */ + __be16 x_len; /* bytes for X axis */ + __be16 y_len; /* bytes for Y axis */ + u8 data[]; +} __attribute__ ((packed)); + +static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 }; +static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f }; + +static void nexio_ack_complete(struct urb *urb) +{ +} + +static int nexio_alloc(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv; + int ret = -ENOMEM; + + usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); + if (!usbtouch->priv) + goto out_buf; + + priv = usbtouch->priv; + + priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), + GFP_KERNEL); + if (!priv->ack_buf) + goto err_priv; + + priv->ack = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->ack) { + dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); + goto err_ack_buf; + } + + return 0; + +err_ack_buf: + kfree(priv->ack_buf); +err_priv: + kfree(priv); +out_buf: + return ret; +} + +static int nexio_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); + struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; + struct nexio_priv *priv = usbtouch->priv; + int ret = -ENOMEM; + int actual_len, i; + unsigned char *buf; + char *firmware_ver = NULL, *device_name = NULL; + int input_ep = 0, output_ep = 0; + + /* find first input and output endpoint */ + for (i = 0; i < interface->desc.bNumEndpoints; i++) { + if (!input_ep && + usb_endpoint_dir_in(&interface->endpoint[i].desc)) + input_ep = interface->endpoint[i].desc.bEndpointAddress; + if (!output_ep && + usb_endpoint_dir_out(&interface->endpoint[i].desc)) + output_ep = interface->endpoint[i].desc.bEndpointAddress; + } + if (!input_ep || !output_ep) + return -ENXIO; + + buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO); + if (!buf) + goto out_buf; + + /* two empty reads */ + for (i = 0; i < 2; i++) { + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + goto out_buf; + } + + /* send init command */ + memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt)); + ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep), + buf, sizeof(nexio_init_pkt), &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + goto out_buf; + + /* read replies */ + for (i = 0; i < 3; i++) { + memset(buf, 0, NEXIO_BUFSIZE); + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0 || actual_len < 1 || buf[1] != actual_len) + continue; + switch (buf[0]) { + case 0x83: /* firmware version */ + if (!firmware_ver) + firmware_ver = kstrdup(&buf[2], GFP_NOIO); + break; + case 0x84: /* device name */ + if (!device_name) + device_name = kstrdup(&buf[2], GFP_NOIO); + break; + } + } + + printk(KERN_INFO "Nexio device: %s, firmware version: %s\n", + device_name, firmware_ver); + + kfree(firmware_ver); + kfree(device_name); + + usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), + priv->ack_buf, sizeof(nexio_ack_pkt), + nexio_ack_complete, usbtouch); + ret = 0; + +out_buf: + kfree(buf); + return ret; +} + +static void nexio_exit(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv = usbtouch->priv; + + usb_kill_urb(priv->ack); + usb_free_urb(priv->ack); + kfree(priv->ack_buf); + kfree(priv); +} + +static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) +{ + struct nexio_touch_packet *packet = (void *) pkt; + struct nexio_priv *priv = usbtouch->priv; + unsigned int data_len = be16_to_cpu(packet->data_len); + unsigned int x_len = be16_to_cpu(packet->x_len); + unsigned int y_len = be16_to_cpu(packet->y_len); + int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; + + /* got touch data? */ + if ((pkt[0] & 0xe0) != 0xe0) + return 0; + + if (data_len > 0xff) + data_len -= 0x100; + if (x_len > 0xff) + x_len -= 0x80; + + /* send ACK */ + ret = usb_submit_urb(priv->ack, GFP_ATOMIC); + + if (!usbtouch->type->max_xc) { + usbtouch->type->max_xc = 2 * x_len; + input_set_abs_params(usbtouch->input, ABS_X, + 0, usbtouch->type->max_xc, 0, 0); + usbtouch->type->max_yc = 2 * y_len; + input_set_abs_params(usbtouch->input, ABS_Y, + 0, usbtouch->type->max_yc, 0, 0); + } + /* + * The device reports state of IR sensors on X and Y axes. + * Each byte represents "darkness" percentage (0-100) of one element. + * 17" touchscreen reports only 64 x 52 bytes so the resolution is low. + * This also means that there's a limited multi-touch capability but + * it's disabled (and untested) here as there's no X driver for that. + */ + begin_x = end_x = begin_y = end_y = -1; + for (x = 0; x < x_len; x++) { + if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { + begin_x = x; + continue; + } + if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { + end_x = x - 1; + for (y = x_len; y < data_len; y++) { + if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { + begin_y = y - x_len; + continue; + } + if (end_y == -1 && + begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { + end_y = y - 1 - x_len; + w = end_x - begin_x; + h = end_y - begin_y; +#if 0 + /* multi-touch */ + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MAJOR, max(w,h)); + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MINOR, min(x,h)); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_X, 2*begin_x+w); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_Y, 2*begin_y+h); + input_report_abs(usbtouch->input, + ABS_MT_ORIENTATION, w > h); + input_mt_sync(usbtouch->input); +#endif + /* single touch */ + usbtouch->x = 2 * begin_x + w; + usbtouch->y = 2 * begin_y + h; + usbtouch->touch = packet->flags & 0x01; + begin_y = end_y = -1; + return 1; + } + } + begin_x = end_x = -1; + } + + } + return 0; +} +#endif + + +/***************************************************************************** + * ELO part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + +static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = pkt[6] > 0; + dev->press = pkt[6]; + + return 1; +} +#endif + + +/***************************************************************************** + * the different device descriptors + */ +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len); +#endif + +static struct usbtouch_device_info usbtouch_dev_info[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + [DEVTYPE_ELO] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = elo_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX + [DEVTYPE_EGALAX] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = egalax_get_pkt_len, + .read_data = egalax_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT + [DEVTYPE_PANJIT] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = panjit_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_3M + [DEVTYPE_3M] = { + .min_xc = 0x0, + .max_xc = 0x4000, + .min_yc = 0x0, + .max_yc = 0x4000, + .rept_size = 11, + .read_data = mtouch_read_data, + .init = mtouch_init, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ITM + [DEVTYPE_ITM] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = itm_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO + [DEVTYPE_ETURBO] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 8, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = eturbo_get_pkt_len, + .read_data = eturbo_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE + [DEVTYPE_GUNZE] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = gunze_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 + [DEVTYPE_DMC_TSC10] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .init = dmc_tsc10_init, + .read_data = dmc_tsc10_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + [DEVTYPE_IRTOUCH] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = irtouch_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK + [DEVTYPE_IDEALTEK] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = idealtek_get_pkt_len, + .read_data = idealtek_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH + [DEVTYPE_GENERAL_TOUCH] = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 7, + .read_data = general_touch_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP + [DEVTYPE_GOTOP] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 4, + .read_data = gotop_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC + [DEVTYPE_JASTEC] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = jastec_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I + [DEVTYPE_E2I] = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 6, + .init = e2i_init, + .read_data = e2i_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC + [DEVTYPE_ZYTRONIC] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .read_data = zytronic_read_data, + .irq_always = true, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + [DEVTYPE_TC45USB] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 5, + .read_data = tc45usb_read_data, + }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + [DEVTYPE_NEXIO] = { + .rept_size = 1024, + .irq_always = true, + .read_data = nexio_read_data, + .alloc = nexio_alloc, + .init = nexio_init, + .exit = nexio_exit, + }, +#endif +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + [DEVTYPE_ETOUCH] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = etouch_get_pkt_len, + .read_data = etouch_read_data, + }, +#endif +}; + + +/***************************************************************************** + * Generic Part + */ +static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + struct usbtouch_device_info *type = usbtouch->type; + + if (!type->read_data(usbtouch, pkt)) + return; + + input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); + + if (swap_xy) { + input_report_abs(usbtouch->input, ABS_X, usbtouch->y); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); + } else { + input_report_abs(usbtouch->input, ABS_X, usbtouch->x); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); + } + if (type->max_press) + input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); + input_sync(usbtouch->input); +} + + +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + unsigned char *buffer; + int pkt_len, pos, buf_len, tmp; + + /* process buffer */ + if (unlikely(usbtouch->buf_len)) { + /* try to get size */ + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + + /* drop? */ + if (unlikely(!pkt_len)) + goto out_flush_buf; + + /* need to append -pkt_len bytes before able to get size */ + if (unlikely(pkt_len < 0)) { + int append = -pkt_len; + if (unlikely(append > len)) + append = len; + if (usbtouch->buf_len + append >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append); + usbtouch->buf_len += append; + + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + if (pkt_len < 0) + return; + } + + /* append */ + tmp = pkt_len - usbtouch->buf_len; + if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); + usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len); + + buffer = pkt + tmp; + buf_len = len - tmp; + } else { + buffer = pkt; + buf_len = len; + } + + /* loop over the received packet, process */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = usbtouch->type->get_pkt_len(buffer + pos, + buf_len - pos); + + /* unknown packet: skip one byte */ + if (unlikely(!pkt_len)) { + pos++; + continue; + } + + /* full packet: process */ + if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) { + usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len); + } else { + /* incomplete packet: save in buffer */ + memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); + usbtouch->buf_len = buf_len - pos; + return; + } + pos += pkt_len; + } + +out_flush_buf: + usbtouch->buf_len = 0; + return; +} +#endif + + +static void usbtouch_irq(struct urb *urb) +{ + struct usbtouch_usb *usbtouch = urb->context; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ETIME: + /* this urb is timing out */ + dbg("%s - urb timed out - was the device unplugged?", + __func__); + return; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -EPIPE: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __func__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __func__, urb->status); + goto exit; + } + + usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); + +exit: + usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + err("%s - usb_submit_urb failed with result: %d", + __func__, retval); +} + +static int usbtouch_open(struct input_dev *input) +{ + struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; + + usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); + + r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0; + if (r < 0) + goto out; + + if (!usbtouch->type->irq_always) { + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) { + r = -EIO; + goto out_put; + } + } + + usbtouch->interface->needs_remote_wakeup = 1; +out_put: + usb_autopm_put_interface(usbtouch->interface); +out: + return r; +} + +static void usbtouch_close(struct input_dev *input) +{ + struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; + + if (!usbtouch->type->irq_always) + usb_kill_urb(usbtouch->irq); + r = usb_autopm_get_interface(usbtouch->interface); + usbtouch->interface->needs_remote_wakeup = 0; + if (!r) + usb_autopm_put_interface(usbtouch->interface); +} + +static int usbtouch_suspend +(struct usb_interface *intf, pm_message_t message) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + usb_kill_urb(usbtouch->irq); + + return 0; +} + +static int usbtouch_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct input_dev *input = usbtouch->input; + int result = 0; + + mutex_lock(&input->mutex); + if (input->users || usbtouch->type->irq_always) + result = usb_submit_urb(usbtouch->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return result; +} + +static int usbtouch_reset_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct input_dev *input = usbtouch->input; + int err = 0; + + /* reinit the device */ + if (usbtouch->type->init) { + err = usbtouch->type->init(usbtouch); + if (err) { + dbg("%s - type->init() failed, err: %d", + __func__, err); + return err; + } + } + + /* restart IO if needed */ + mutex_lock(&input->mutex); + if (input->users) + err = usb_submit_urb(usbtouch->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return err; +} + +static void usbtouch_free_buffers(struct usb_device *udev, + struct usbtouch_usb *usbtouch) +{ + usb_free_coherent(udev, usbtouch->type->rept_size, + usbtouch->data, usbtouch->data_dma); + kfree(usbtouch->buffer); +} + +static struct usb_endpoint_descriptor * +usbtouch_get_input_endpoint(struct usb_host_interface *interface) +{ + int i; + + for (i = 0; i < interface->desc.bNumEndpoints; i++) + if (usb_endpoint_dir_in(&interface->endpoint[i].desc)) + return &interface->endpoint[i].desc; + + return NULL; +} + +static int usbtouch_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usbtouch_usb *usbtouch; + struct input_dev *input_dev; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev = interface_to_usbdev(intf); + struct usbtouch_device_info *type; + int err = -ENOMEM; + + /* some devices are ignored */ + if (id->driver_info == DEVTYPE_IGNORE) + return -ENODEV; + + endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting); + if (!endpoint) + return -ENXIO; + + usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!usbtouch || !input_dev) + goto out_free; + + type = &usbtouch_dev_info[id->driver_info]; + usbtouch->type = type; + if (!type->process_pkt) + type->process_pkt = usbtouch_process_pkt; + + usbtouch->data = usb_alloc_coherent(udev, type->rept_size, + GFP_KERNEL, &usbtouch->data_dma); + if (!usbtouch->data) + goto out_free; + + if (type->get_pkt_len) { + usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); + if (!usbtouch->buffer) + goto out_free_buffers; + } + + usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!usbtouch->irq) { + dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__); + goto out_free_buffers; + } + + usbtouch->interface = intf; + usbtouch->input = input_dev; + + if (udev->manufacturer) + strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(usbtouch->name, " ", sizeof(usbtouch->name)); + strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name)); + } + + if (!strlen(usbtouch->name)) + snprintf(usbtouch->name, sizeof(usbtouch->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); + strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); + + input_dev->name = usbtouch->name; + input_dev->phys = usbtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, usbtouch); + + input_dev->open = usbtouch_open; + input_dev->close = usbtouch_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0); + input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0); + if (type->max_press) + input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, + type->max_press, 0, 0); + + if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) + usb_fill_int_urb(usbtouch->irq, udev, + usb_rcvintpipe(udev, endpoint->bEndpointAddress), + usbtouch->data, type->rept_size, + usbtouch_irq, usbtouch, endpoint->bInterval); + else + usb_fill_bulk_urb(usbtouch->irq, udev, + usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), + usbtouch->data, type->rept_size, + usbtouch_irq, usbtouch); + + usbtouch->irq->dev = udev; + usbtouch->irq->transfer_dma = usbtouch->data_dma; + usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* device specific allocations */ + if (type->alloc) { + err = type->alloc(usbtouch); + if (err) { + dbg("%s - type->alloc() failed, err: %d", __func__, err); + goto out_free_urb; + } + } + + /* device specific initialisation*/ + if (type->init) { + err = type->init(usbtouch); + if (err) { + dbg("%s - type->init() failed, err: %d", __func__, err); + goto out_do_exit; + } + } + + err = input_register_device(usbtouch->input); + if (err) { + dbg("%s - input_register_device failed, err: %d", __func__, err); + goto out_do_exit; + } + + usb_set_intfdata(intf, usbtouch); + + if (usbtouch->type->irq_always) { + /* this can't fail */ + usb_autopm_get_interface(intf); + err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); + if (err) { + usb_autopm_put_interface(intf); + err("%s - usb_submit_urb failed with result: %d", + __func__, err); + goto out_unregister_input; + } + } + + return 0; + +out_unregister_input: + input_unregister_device(input_dev); + input_dev = NULL; +out_do_exit: + if (type->exit) + type->exit(usbtouch); +out_free_urb: + usb_free_urb(usbtouch->irq); +out_free_buffers: + usbtouch_free_buffers(udev, usbtouch); +out_free: + input_free_device(input_dev); + kfree(usbtouch); + return err; +} + +static void usbtouch_disconnect(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + dbg("%s - called", __func__); + + if (!usbtouch) + return; + + dbg("%s - usbtouch is initialized, cleaning up", __func__); + usb_set_intfdata(intf, NULL); + /* this will stop IO via close */ + input_unregister_device(usbtouch->input); + usb_free_urb(usbtouch->irq); + if (usbtouch->type->exit) + usbtouch->type->exit(usbtouch); + usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); + kfree(usbtouch); +} + +MODULE_DEVICE_TABLE(usb, usbtouch_devices); + +static struct usb_driver usbtouch_driver = { + .name = "usbtouchscreen", + .probe = usbtouch_probe, + .disconnect = usbtouch_disconnect, + .suspend = usbtouch_suspend, + .resume = usbtouch_resume, + .reset_resume = usbtouch_reset_resume, + .id_table = usbtouch_devices, + .supports_autosuspend = 1, +}; + +module_usb_driver(usbtouch_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS("touchkitusb"); +MODULE_ALIAS("itmtouch"); +MODULE_ALIAS("mtouchusb"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/w90p910_ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/w90p910_ts.c new file mode 100644 index 00000000..9396b21d --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/w90p910_ts.c @@ -0,0 +1,339 @@ +/* + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +/* ADC controller bit defines */ +#define ADC_DELAY 0xf00 +#define ADC_DOWN 0x01 +#define ADC_TSC_Y (0x01 << 8) +#define ADC_TSC_X (0x00 << 8) +#define TSC_FOURWIRE (~(0x03 << 1)) +#define ADC_CLK_EN (0x01 << 28) /* ADC clock enable */ +#define ADC_READ_CON (0x01 << 12) +#define ADC_CONV (0x01 << 13) +#define ADC_SEMIAUTO (0x01 << 14) +#define ADC_WAITTRIG (0x03 << 14) +#define ADC_RST1 (0x01 << 16) +#define ADC_RST0 (0x00 << 16) +#define ADC_EN (0x01 << 17) +#define ADC_INT (0x01 << 18) +#define WT_INT (0x01 << 20) +#define ADC_INT_EN (0x01 << 21) +#define LVD_INT_EN (0x01 << 22) +#define WT_INT_EN (0x01 << 23) +#define ADC_DIV (0x04 << 1) /* div = 6 */ + +enum ts_state { + TS_WAIT_NEW_PACKET, /* We are waiting next touch report */ + TS_WAIT_X_COORD, /* We are waiting for ADC to report X coord */ + TS_WAIT_Y_COORD, /* We are waiting for ADC to report Y coord */ + TS_IDLE, /* Input device is closed, don't do anything */ +}; + +struct w90p910_ts { + struct input_dev *input; + struct timer_list timer; + struct clk *clk; + int irq_num; + void __iomem *ts_reg; + spinlock_t lock; + enum ts_state state; +}; + +static void w90p910_report_event(struct w90p910_ts *w90p910_ts, bool down) +{ + struct input_dev *dev = w90p910_ts->input; + + if (down) { + input_report_abs(dev, ABS_X, + __raw_readl(w90p910_ts->ts_reg + 0x0c)); + input_report_abs(dev, ABS_Y, + __raw_readl(w90p910_ts->ts_reg + 0x10)); + } + + input_report_key(dev, BTN_TOUCH, down); + input_sync(dev); +} + +static void w90p910_prepare_x_reading(struct w90p910_ts *w90p910_ts) +{ + unsigned long ctlreg; + + __raw_writel(ADC_TSC_X, w90p910_ts->ts_reg + 0x04); + ctlreg = __raw_readl(w90p910_ts->ts_reg); + ctlreg &= ~(ADC_WAITTRIG | WT_INT | WT_INT_EN); + ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV; + __raw_writel(ctlreg, w90p910_ts->ts_reg); + + w90p910_ts->state = TS_WAIT_X_COORD; +} + +static void w90p910_prepare_y_reading(struct w90p910_ts *w90p910_ts) +{ + unsigned long ctlreg; + + __raw_writel(ADC_TSC_Y, w90p910_ts->ts_reg + 0x04); + ctlreg = __raw_readl(w90p910_ts->ts_reg); + ctlreg &= ~(ADC_WAITTRIG | ADC_INT | WT_INT_EN); + ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV; + __raw_writel(ctlreg, w90p910_ts->ts_reg); + + w90p910_ts->state = TS_WAIT_Y_COORD; +} + +static void w90p910_prepare_next_packet(struct w90p910_ts *w90p910_ts) +{ + unsigned long ctlreg; + + ctlreg = __raw_readl(w90p910_ts->ts_reg); + ctlreg &= ~(ADC_INT | ADC_INT_EN | ADC_SEMIAUTO | ADC_CONV); + ctlreg |= ADC_WAITTRIG | WT_INT_EN; + __raw_writel(ctlreg, w90p910_ts->ts_reg); + + w90p910_ts->state = TS_WAIT_NEW_PACKET; +} + +static irqreturn_t w90p910_ts_interrupt(int irq, void *dev_id) +{ + struct w90p910_ts *w90p910_ts = dev_id; + unsigned long flags; + + spin_lock_irqsave(&w90p910_ts->lock, flags); + + switch (w90p910_ts->state) { + case TS_WAIT_NEW_PACKET: + /* + * The controller only generates interrupts when pen + * is down. + */ + del_timer(&w90p910_ts->timer); + w90p910_prepare_x_reading(w90p910_ts); + break; + + + case TS_WAIT_X_COORD: + w90p910_prepare_y_reading(w90p910_ts); + break; + + case TS_WAIT_Y_COORD: + w90p910_report_event(w90p910_ts, true); + w90p910_prepare_next_packet(w90p910_ts); + mod_timer(&w90p910_ts->timer, jiffies + msecs_to_jiffies(100)); + break; + + case TS_IDLE: + break; + } + + spin_unlock_irqrestore(&w90p910_ts->lock, flags); + + return IRQ_HANDLED; +} + +static void w90p910_check_pen_up(unsigned long data) +{ + struct w90p910_ts *w90p910_ts = (struct w90p910_ts *) data; + unsigned long flags; + + spin_lock_irqsave(&w90p910_ts->lock, flags); + + if (w90p910_ts->state == TS_WAIT_NEW_PACKET && + !(__raw_readl(w90p910_ts->ts_reg + 0x04) & ADC_DOWN)) { + + w90p910_report_event(w90p910_ts, false); + } + + spin_unlock_irqrestore(&w90p910_ts->lock, flags); +} + +static int w90p910_open(struct input_dev *dev) +{ + struct w90p910_ts *w90p910_ts = input_get_drvdata(dev); + unsigned long val; + + /* enable the ADC clock */ + clk_enable(w90p910_ts->clk); + + __raw_writel(ADC_RST1, w90p910_ts->ts_reg); + msleep(1); + __raw_writel(ADC_RST0, w90p910_ts->ts_reg); + msleep(1); + + /* set delay and screen type */ + val = __raw_readl(w90p910_ts->ts_reg + 0x04); + __raw_writel(val & TSC_FOURWIRE, w90p910_ts->ts_reg + 0x04); + __raw_writel(ADC_DELAY, w90p910_ts->ts_reg + 0x08); + + w90p910_ts->state = TS_WAIT_NEW_PACKET; + wmb(); + + /* set trigger mode */ + val = __raw_readl(w90p910_ts->ts_reg); + val |= ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN; + __raw_writel(val, w90p910_ts->ts_reg); + + return 0; +} + +static void w90p910_close(struct input_dev *dev) +{ + struct w90p910_ts *w90p910_ts = input_get_drvdata(dev); + unsigned long val; + + /* disable trigger mode */ + + spin_lock_irq(&w90p910_ts->lock); + + w90p910_ts->state = TS_IDLE; + + val = __raw_readl(w90p910_ts->ts_reg); + val &= ~(ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN | ADC_INT_EN); + __raw_writel(val, w90p910_ts->ts_reg); + + spin_unlock_irq(&w90p910_ts->lock); + + /* Now that interrupts are shut off we can safely delete timer */ + del_timer_sync(&w90p910_ts->timer); + + /* stop the ADC clock */ + clk_disable(w90p910_ts->clk); +} + +static int __devinit w90x900ts_probe(struct platform_device *pdev) +{ + struct w90p910_ts *w90p910_ts; + struct input_dev *input_dev; + struct resource *res; + int err; + + w90p910_ts = kzalloc(sizeof(struct w90p910_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!w90p910_ts || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + w90p910_ts->input = input_dev; + w90p910_ts->state = TS_IDLE; + spin_lock_init(&w90p910_ts->lock); + setup_timer(&w90p910_ts->timer, w90p910_check_pen_up, + (unsigned long)w90p910_ts); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENXIO; + goto fail1; + } + + if (!request_mem_region(res->start, resource_size(res), + pdev->name)) { + err = -EBUSY; + goto fail1; + } + + w90p910_ts->ts_reg = ioremap(res->start, resource_size(res)); + if (!w90p910_ts->ts_reg) { + err = -ENOMEM; + goto fail2; + } + + w90p910_ts->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(w90p910_ts->clk)) { + err = PTR_ERR(w90p910_ts->clk); + goto fail3; + } + + input_dev->name = "W90P910 TouchScreen"; + input_dev->phys = "w90p910ts/event0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0005; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &pdev->dev; + input_dev->open = w90p910_open; + input_dev->close = w90p910_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, 0x400, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x400, 0, 0); + + input_set_drvdata(input_dev, w90p910_ts); + + w90p910_ts->irq_num = platform_get_irq(pdev, 0); + if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt, + 0, "w90p910ts", w90p910_ts)) { + err = -EBUSY; + goto fail4; + } + + err = input_register_device(w90p910_ts->input); + if (err) + goto fail5; + + platform_set_drvdata(pdev, w90p910_ts); + + return 0; + +fail5: free_irq(w90p910_ts->irq_num, w90p910_ts); +fail4: clk_put(w90p910_ts->clk); +fail3: iounmap(w90p910_ts->ts_reg); +fail2: release_mem_region(res->start, resource_size(res)); +fail1: input_free_device(input_dev); + kfree(w90p910_ts); + return err; +} + +static int __devexit w90x900ts_remove(struct platform_device *pdev) +{ + struct w90p910_ts *w90p910_ts = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(w90p910_ts->irq_num, w90p910_ts); + del_timer_sync(&w90p910_ts->timer); + iounmap(w90p910_ts->ts_reg); + + clk_put(w90p910_ts->clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + input_unregister_device(w90p910_ts->input); + kfree(w90p910_ts); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver w90x900ts_driver = { + .probe = w90x900ts_probe, + .remove = __devexit_p(w90x900ts_remove), + .driver = { + .name = "nuc900-ts", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(w90x900ts_driver); + +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); +MODULE_DESCRIPTION("w90p910 touch screen driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:nuc900-ts"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wacom_w8001.c b/ANDROID_3.4.5/drivers/input/touchscreen/wacom_w8001.c new file mode 100644 index 00000000..1569a393 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/wacom_w8001.c @@ -0,0 +1,608 @@ +/* + * Wacom W8001 penabled serial touchscreen driver + * + * Copyright (c) 2008 Jaya Kumar + * Copyright (c) 2010 Red Hat, Inc. + * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout based on Elo serial touchscreen driver by Vojtech Pavlik + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input/mt.h> +#include <linux/serio.h> +#include <linux/init.h> +#include <linux/ctype.h> +#include <linux/delay.h> + +#define DRIVER_DESC "Wacom W8001 serial touchscreen driver" + +MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define W8001_MAX_LENGTH 11 +#define W8001_LEAD_MASK 0x80 +#define W8001_LEAD_BYTE 0x80 +#define W8001_TAB_MASK 0x40 +#define W8001_TAB_BYTE 0x40 +/* set in first byte of touch data packets */ +#define W8001_TOUCH_MASK (0x10 | W8001_LEAD_MASK) +#define W8001_TOUCH_BYTE (0x10 | W8001_LEAD_BYTE) + +#define W8001_QUERY_PACKET 0x20 + +#define W8001_CMD_STOP '0' +#define W8001_CMD_START '1' +#define W8001_CMD_QUERY '*' +#define W8001_CMD_TOUCHQUERY '%' + +/* length of data packets in bytes, depends on device. */ +#define W8001_PKTLEN_TOUCH93 5 +#define W8001_PKTLEN_TOUCH9A 7 +#define W8001_PKTLEN_TPCPEN 9 +#define W8001_PKTLEN_TPCCTL 11 /* control packet */ +#define W8001_PKTLEN_TOUCH2FG 13 + +/* resolution in points/mm */ +#define W8001_PEN_RESOLUTION 100 +#define W8001_TOUCH_RESOLUTION 10 + +struct w8001_coord { + u8 rdy; + u8 tsw; + u8 f1; + u8 f2; + u16 x; + u16 y; + u16 pen_pressure; + u8 tilt_x; + u8 tilt_y; +}; + +/* touch query reply packet */ +struct w8001_touch_query { + u16 x; + u16 y; + u8 panel_res; + u8 capacity_res; + u8 sensor_id; +}; + +/* + * Per-touchscreen data. + */ + +struct w8001 { + struct input_dev *dev; + struct serio *serio; + struct completion cmd_done; + int id; + int idx; + unsigned char response_type; + unsigned char response[W8001_MAX_LENGTH]; + unsigned char data[W8001_MAX_LENGTH]; + char phys[32]; + int type; + unsigned int pktlen; + u16 max_touch_x; + u16 max_touch_y; + u16 max_pen_x; + u16 max_pen_y; + char name[64]; +}; + +static void parse_pen_data(u8 *data, struct w8001_coord *coord) +{ + memset(coord, 0, sizeof(*coord)); + + coord->rdy = data[0] & 0x20; + coord->tsw = data[0] & 0x01; + coord->f1 = data[0] & 0x02; + coord->f2 = data[0] & 0x04; + + coord->x = (data[1] & 0x7F) << 9; + coord->x |= (data[2] & 0x7F) << 2; + coord->x |= (data[6] & 0x60) >> 5; + + coord->y = (data[3] & 0x7F) << 9; + coord->y |= (data[4] & 0x7F) << 2; + coord->y |= (data[6] & 0x18) >> 3; + + coord->pen_pressure = data[5] & 0x7F; + coord->pen_pressure |= (data[6] & 0x07) << 7 ; + + coord->tilt_x = data[7] & 0x7F; + coord->tilt_y = data[8] & 0x7F; +} + +static void parse_single_touch(u8 *data, struct w8001_coord *coord) +{ + coord->x = (data[1] << 7) | data[2]; + coord->y = (data[3] << 7) | data[4]; + coord->tsw = data[0] & 0x01; +} + +static void scale_touch_coordinates(struct w8001 *w8001, + unsigned int *x, unsigned int *y) +{ + if (w8001->max_pen_x && w8001->max_touch_x) + *x = *x * w8001->max_pen_x / w8001->max_touch_x; + + if (w8001->max_pen_y && w8001->max_touch_y) + *y = *y * w8001->max_pen_y / w8001->max_touch_y; +} + +static void parse_multi_touch(struct w8001 *w8001) +{ + struct input_dev *dev = w8001->dev; + unsigned char *data = w8001->data; + unsigned int x, y; + int i; + int count = 0; + + for (i = 0; i < 2; i++) { + bool touch = data[0] & (1 << i); + + input_mt_slot(dev, i); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch); + if (touch) { + x = (data[6 * i + 1] << 7) | data[6 * i + 2]; + y = (data[6 * i + 3] << 7) | data[6 * i + 4]; + /* data[5,6] and [11,12] is finger capacity */ + + /* scale to pen maximum */ + scale_touch_coordinates(w8001, &x, &y); + + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + count++; + } + } + + /* emulate single touch events when stylus is out of proximity. + * This is to make single touch backward support consistent + * across all Wacom single touch devices. + */ + if (w8001->type != BTN_TOOL_PEN && + w8001->type != BTN_TOOL_RUBBER) { + w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED; + input_mt_report_pointer_emulation(dev, true); + } + + input_sync(dev); +} + +static void parse_touchquery(u8 *data, struct w8001_touch_query *query) +{ + memset(query, 0, sizeof(*query)); + + query->panel_res = data[1]; + query->sensor_id = data[2] & 0x7; + query->capacity_res = data[7]; + + query->x = data[3] << 9; + query->x |= data[4] << 2; + query->x |= (data[2] >> 5) & 0x3; + + query->y = data[5] << 9; + query->y |= data[6] << 2; + query->y |= (data[2] >> 3) & 0x3; + + /* Early days' single-finger touch models need the following defaults */ + if (!query->x && !query->y) { + query->x = 1024; + query->y = 1024; + if (query->panel_res) + query->x = query->y = (1 << query->panel_res); + query->panel_res = W8001_TOUCH_RESOLUTION; + } +} + +static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) +{ + struct input_dev *dev = w8001->dev; + + /* + * We have 1 bit for proximity (rdy) and 3 bits for tip, side, + * side2/eraser. If rdy && f2 are set, this can be either pen + side2, + * or eraser. Assume: + * - if dev is already in proximity and f2 is toggled → pen + side2 + * - if dev comes into proximity with f2 set → eraser + * If f2 disappears after assuming eraser, fake proximity out for + * eraser and in for pen. + */ + + switch (w8001->type) { + case BTN_TOOL_RUBBER: + if (!coord->f2) { + input_report_abs(dev, ABS_PRESSURE, 0); + input_report_key(dev, BTN_TOUCH, 0); + input_report_key(dev, BTN_STYLUS, 0); + input_report_key(dev, BTN_STYLUS2, 0); + input_report_key(dev, BTN_TOOL_RUBBER, 0); + input_sync(dev); + w8001->type = BTN_TOOL_PEN; + } + break; + + case BTN_TOOL_FINGER: + input_report_key(dev, BTN_TOUCH, 0); + input_report_key(dev, BTN_TOOL_FINGER, 0); + input_sync(dev); + /* fall through */ + + case KEY_RESERVED: + w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + break; + + default: + input_report_key(dev, BTN_STYLUS2, coord->f2); + break; + } + + input_report_abs(dev, ABS_X, coord->x); + input_report_abs(dev, ABS_Y, coord->y); + input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure); + input_report_key(dev, BTN_TOUCH, coord->tsw); + input_report_key(dev, BTN_STYLUS, coord->f1); + input_report_key(dev, w8001->type, coord->rdy); + input_sync(dev); + + if (!coord->rdy) + w8001->type = KEY_RESERVED; +} + +static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord) +{ + struct input_dev *dev = w8001->dev; + unsigned int x = coord->x; + unsigned int y = coord->y; + + /* scale to pen maximum */ + scale_touch_coordinates(w8001, &x, &y); + + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_report_key(dev, BTN_TOUCH, coord->tsw); + input_report_key(dev, BTN_TOOL_FINGER, coord->tsw); + + input_sync(dev); + + w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED; +} + +static irqreturn_t w8001_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct w8001 *w8001 = serio_get_drvdata(serio); + struct w8001_coord coord; + unsigned char tmp; + + w8001->data[w8001->idx] = data; + switch (w8001->idx++) { + case 0: + if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) { + pr_debug("w8001: unsynchronized data: 0x%02x\n", data); + w8001->idx = 0; + } + break; + + case W8001_PKTLEN_TOUCH93 - 1: + case W8001_PKTLEN_TOUCH9A - 1: + tmp = w8001->data[0] & W8001_TOUCH_BYTE; + if (tmp != W8001_TOUCH_BYTE) + break; + + if (w8001->pktlen == w8001->idx) { + w8001->idx = 0; + if (w8001->type != BTN_TOOL_PEN && + w8001->type != BTN_TOOL_RUBBER) { + parse_single_touch(w8001->data, &coord); + report_single_touch(w8001, &coord); + } + } + break; + + /* Pen coordinates packet */ + case W8001_PKTLEN_TPCPEN - 1: + tmp = w8001->data[0] & W8001_TAB_MASK; + if (unlikely(tmp == W8001_TAB_BYTE)) + break; + + tmp = w8001->data[0] & W8001_TOUCH_BYTE; + if (tmp == W8001_TOUCH_BYTE) + break; + + w8001->idx = 0; + parse_pen_data(w8001->data, &coord); + report_pen_events(w8001, &coord); + break; + + /* control packet */ + case W8001_PKTLEN_TPCCTL - 1: + tmp = w8001->data[0] & W8001_TOUCH_MASK; + if (tmp == W8001_TOUCH_BYTE) + break; + + w8001->idx = 0; + memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH); + w8001->response_type = W8001_QUERY_PACKET; + complete(&w8001->cmd_done); + break; + + /* 2 finger touch packet */ + case W8001_PKTLEN_TOUCH2FG - 1: + w8001->idx = 0; + parse_multi_touch(w8001); + break; + } + + return IRQ_HANDLED; +} + +static int w8001_command(struct w8001 *w8001, unsigned char command, + bool wait_response) +{ + int rc; + + w8001->response_type = 0; + init_completion(&w8001->cmd_done); + + rc = serio_write(w8001->serio, command); + if (rc == 0 && wait_response) { + + wait_for_completion_timeout(&w8001->cmd_done, HZ); + if (w8001->response_type != W8001_QUERY_PACKET) + rc = -EIO; + } + + return rc; +} + +static int w8001_open(struct input_dev *dev) +{ + struct w8001 *w8001 = input_get_drvdata(dev); + + return w8001_command(w8001, W8001_CMD_START, false); +} + +static void w8001_close(struct input_dev *dev) +{ + struct w8001 *w8001 = input_get_drvdata(dev); + + w8001_command(w8001, W8001_CMD_STOP, false); +} + +static int w8001_setup(struct w8001 *w8001) +{ + struct input_dev *dev = w8001->dev; + struct w8001_coord coord; + struct w8001_touch_query touch; + int error; + + error = w8001_command(w8001, W8001_CMD_STOP, false); + if (error) + return error; + + msleep(250); /* wait 250ms before querying the device */ + + dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name)); + + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + + /* penabled? */ + error = w8001_command(w8001, W8001_CMD_QUERY, true); + if (!error) { + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_PEN, dev->keybit); + __set_bit(BTN_TOOL_RUBBER, dev->keybit); + __set_bit(BTN_STYLUS, dev->keybit); + __set_bit(BTN_STYLUS2, dev->keybit); + + parse_pen_data(w8001->response, &coord); + w8001->max_pen_x = coord.x; + w8001->max_pen_y = coord.y; + + input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); + input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION); + input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION); + input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); + if (coord.tilt_x && coord.tilt_y) { + input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); + input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); + } + w8001->id = 0x90; + strlcat(w8001->name, " Penabled", sizeof(w8001->name)); + } + + /* Touch enabled? */ + error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true); + + /* + * Some non-touch devices may reply to the touch query. But their + * second byte is empty, which indicates touch is not supported. + */ + if (!error && w8001->response[1]) { + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + + parse_touchquery(w8001->response, &touch); + w8001->max_touch_x = touch.x; + w8001->max_touch_y = touch.y; + + if (w8001->max_pen_x && w8001->max_pen_y) { + /* if pen is supported scale to pen maximum */ + touch.x = w8001->max_pen_x; + touch.y = w8001->max_pen_y; + touch.panel_res = W8001_PEN_RESOLUTION; + } + + input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0); + input_abs_set_res(dev, ABS_X, touch.panel_res); + input_abs_set_res(dev, ABS_Y, touch.panel_res); + + switch (touch.sensor_id) { + case 0: + case 2: + w8001->pktlen = W8001_PKTLEN_TOUCH93; + w8001->id = 0x93; + strlcat(w8001->name, " 1FG", sizeof(w8001->name)); + break; + + case 1: + case 3: + case 4: + w8001->pktlen = W8001_PKTLEN_TOUCH9A; + strlcat(w8001->name, " 1FG", sizeof(w8001->name)); + w8001->id = 0x9a; + break; + + case 5: + w8001->pktlen = W8001_PKTLEN_TOUCH2FG; + + input_mt_init_slots(dev, 2); + input_set_abs_params(dev, ABS_MT_POSITION_X, + 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, + 0, touch.y, 0, 0); + input_set_abs_params(dev, ABS_MT_TOOL_TYPE, + 0, MT_TOOL_MAX, 0, 0); + + strlcat(w8001->name, " 2FG", sizeof(w8001->name)); + if (w8001->max_pen_x && w8001->max_pen_y) + w8001->id = 0xE3; + else + w8001->id = 0xE2; + break; + } + } + + strlcat(w8001->name, " Touchscreen", sizeof(w8001->name)); + + return 0; +} + +/* + * w8001_disconnect() is the opposite of w8001_connect() + */ + +static void w8001_disconnect(struct serio *serio) +{ + struct w8001 *w8001 = serio_get_drvdata(serio); + + serio_close(serio); + + input_unregister_device(w8001->dev); + kfree(w8001); + + serio_set_drvdata(serio, NULL); +} + +/* + * w8001_connect() is the routine that is called when someone adds a + * new serio device that supports the w8001 protocol and registers it as + * an input device. + */ + +static int w8001_connect(struct serio *serio, struct serio_driver *drv) +{ + struct w8001 *w8001; + struct input_dev *input_dev; + int err; + + w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!w8001 || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + w8001->serio = serio; + w8001->dev = input_dev; + init_completion(&w8001->cmd_done); + snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys); + + serio_set_drvdata(serio, w8001); + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = w8001_setup(w8001); + if (err) + goto fail3; + + input_dev->name = w8001->name; + input_dev->phys = w8001->phys; + input_dev->id.product = w8001->id; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = 0x056a; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->open = w8001_open; + input_dev->close = w8001_close; + + input_set_drvdata(input_dev, w8001); + + err = input_register_device(w8001->dev); + if (err) + goto fail3; + + return 0; + +fail3: + serio_close(serio); +fail2: + serio_set_drvdata(serio, NULL); +fail1: + input_free_device(input_dev); + kfree(w8001); + return err; +} + +static struct serio_device_id w8001_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_W8001, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, w8001_serio_ids); + +static struct serio_driver w8001_drv = { + .driver = { + .name = "w8001", + }, + .description = DRIVER_DESC, + .id_table = w8001_serio_ids, + .interrupt = w8001_interrupt, + .connect = w8001_connect, + .disconnect = w8001_disconnect, +}; + +static int __init w8001_init(void) +{ + return serio_register_driver(&w8001_drv); +} + +static void __exit w8001_exit(void) +{ + serio_unregister_driver(&w8001_drv); +} + +module_init(w8001_init); +module_exit(w8001_exit); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wm831x-ts.c b/ANDROID_3.4.5/drivers/input/touchscreen/wm831x-ts.c new file mode 100644 index 00000000..4bc851a9 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/wm831x-ts.c @@ -0,0 +1,410 @@ +/* + * Touchscreen driver for WM831x PMICs + * + * Copyright 2011 Wolfson Microelectronics plc. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/pm.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* + * R16424 (0x4028) - Touch Control 1 + */ +#define WM831X_TCH_ENA 0x8000 /* TCH_ENA */ +#define WM831X_TCH_CVT_ENA 0x4000 /* TCH_CVT_ENA */ +#define WM831X_TCH_SLPENA 0x1000 /* TCH_SLPENA */ +#define WM831X_TCH_Z_ENA 0x0400 /* TCH_Z_ENA */ +#define WM831X_TCH_Y_ENA 0x0200 /* TCH_Y_ENA */ +#define WM831X_TCH_X_ENA 0x0100 /* TCH_X_ENA */ +#define WM831X_TCH_DELAY_MASK 0x00E0 /* TCH_DELAY - [7:5] */ +#define WM831X_TCH_DELAY_SHIFT 5 /* TCH_DELAY - [7:5] */ +#define WM831X_TCH_DELAY_WIDTH 3 /* TCH_DELAY - [7:5] */ +#define WM831X_TCH_RATE_MASK 0x001F /* TCH_RATE - [4:0] */ +#define WM831X_TCH_RATE_SHIFT 0 /* TCH_RATE - [4:0] */ +#define WM831X_TCH_RATE_WIDTH 5 /* TCH_RATE - [4:0] */ + +/* + * R16425 (0x4029) - Touch Control 2 + */ +#define WM831X_TCH_PD_WK 0x2000 /* TCH_PD_WK */ +#define WM831X_TCH_5WIRE 0x1000 /* TCH_5WIRE */ +#define WM831X_TCH_PDONLY 0x0800 /* TCH_PDONLY */ +#define WM831X_TCH_ISEL 0x0100 /* TCH_ISEL */ +#define WM831X_TCH_RPU_MASK 0x000F /* TCH_RPU - [3:0] */ +#define WM831X_TCH_RPU_SHIFT 0 /* TCH_RPU - [3:0] */ +#define WM831X_TCH_RPU_WIDTH 4 /* TCH_RPU - [3:0] */ + +/* + * R16426-8 (0x402A-C) - Touch Data X/Y/X + */ +#define WM831X_TCH_PD 0x8000 /* TCH_PD1 */ +#define WM831X_TCH_DATA_MASK 0x0FFF /* TCH_DATA - [11:0] */ +#define WM831X_TCH_DATA_SHIFT 0 /* TCH_DATA - [11:0] */ +#define WM831X_TCH_DATA_WIDTH 12 /* TCH_DATA - [11:0] */ + +struct wm831x_ts { + struct input_dev *input_dev; + struct wm831x *wm831x; + unsigned int data_irq; + unsigned int pd_irq; + bool pressure; + bool pen_down; + struct work_struct pd_data_work; +}; + +static void wm831x_pd_data_work(struct work_struct *work) +{ + struct wm831x_ts *wm831x_ts = + container_of(work, struct wm831x_ts, pd_data_work); + + if (wm831x_ts->pen_down) { + enable_irq(wm831x_ts->data_irq); + dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n"); + } else { + enable_irq(wm831x_ts->pd_irq); + dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n"); + } +} + +static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data) +{ + struct wm831x_ts *wm831x_ts = irq_data; + struct wm831x *wm831x = wm831x_ts->wm831x; + static int data_types[] = { ABS_X, ABS_Y, ABS_PRESSURE }; + u16 data[3]; + int count; + int i, ret; + + if (wm831x_ts->pressure) + count = 3; + else + count = 2; + + wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT); + + ret = wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, + data); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to read touch data: %d\n", + ret); + return IRQ_NONE; + } + + /* + * We get a pen down reading on every reading, report pen up if any + * individual reading does so. + */ + wm831x_ts->pen_down = true; + for (i = 0; i < count; i++) { + if (!(data[i] & WM831X_TCH_PD)) { + wm831x_ts->pen_down = false; + continue; + } + input_report_abs(wm831x_ts->input_dev, data_types[i], + data[i] & WM831X_TCH_DATA_MASK); + } + + if (!wm831x_ts->pen_down) { + /* Switch from data to pen down */ + dev_dbg(wm831x->dev, "IRQ DATA->PD\n"); + + disable_irq_nosync(wm831x_ts->data_irq); + + /* Don't need data any more */ + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | + WM831X_TCH_Z_ENA, 0); + + /* Flush any final samples that arrived while reading */ + wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT); + + wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, data); + + if (wm831x_ts->pressure) + input_report_abs(wm831x_ts->input_dev, + ABS_PRESSURE, 0); + + input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0); + + schedule_work(&wm831x_ts->pd_data_work); + } else { + input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1); + } + + input_sync(wm831x_ts->input_dev); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data) +{ + struct wm831x_ts *wm831x_ts = irq_data; + struct wm831x *wm831x = wm831x_ts->wm831x; + int ena = 0; + + if (wm831x_ts->pen_down) + return IRQ_HANDLED; + + disable_irq_nosync(wm831x_ts->pd_irq); + + /* Start collecting data */ + if (wm831x_ts->pressure) + ena |= WM831X_TCH_Z_ENA; + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena); + + wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_TCHPD_EINT, WM831X_TCHPD_EINT); + + wm831x_ts->pen_down = true; + + /* Switch from pen down to data */ + dev_dbg(wm831x->dev, "IRQ PD->DATA\n"); + schedule_work(&wm831x_ts->pd_data_work); + + return IRQ_HANDLED; +} + +static int wm831x_ts_input_open(struct input_dev *idev) +{ + struct wm831x_ts *wm831x_ts = input_get_drvdata(idev); + struct wm831x *wm831x = wm831x_ts->wm831x; + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_ENA | WM831X_TCH_CVT_ENA | + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | + WM831X_TCH_Z_ENA, WM831X_TCH_ENA); + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_CVT_ENA, WM831X_TCH_CVT_ENA); + + return 0; +} + +static void wm831x_ts_input_close(struct input_dev *idev) +{ + struct wm831x_ts *wm831x_ts = input_get_drvdata(idev); + struct wm831x *wm831x = wm831x_ts->wm831x; + + /* Shut the controller down, disabling all other functionality too */ + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_ENA | WM831X_TCH_X_ENA | + WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0); + + /* Make sure any pending IRQs are done, the above will prevent + * new ones firing. + */ + synchronize_irq(wm831x_ts->data_irq); + synchronize_irq(wm831x_ts->pd_irq); + + /* Make sure the IRQ completion work is quiesced */ + flush_work_sync(&wm831x_ts->pd_data_work); + + /* If we ended up with the pen down then make sure we revert back + * to pen detection state for the next time we start up. + */ + if (wm831x_ts->pen_down) { + disable_irq(wm831x_ts->data_irq); + enable_irq(wm831x_ts->pd_irq); + wm831x_ts->pen_down = false; + } +} + +static __devinit int wm831x_ts_probe(struct platform_device *pdev) +{ + struct wm831x_ts *wm831x_ts; + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent); + struct wm831x_touch_pdata *pdata = NULL; + struct input_dev *input_dev; + int error, irqf; + + if (core_pdata) + pdata = core_pdata->touch; + + wm831x_ts = kzalloc(sizeof(struct wm831x_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wm831x_ts || !input_dev) { + error = -ENOMEM; + goto err_alloc; + } + + wm831x_ts->wm831x = wm831x; + wm831x_ts->input_dev = input_dev; + INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work); + + /* + * If we have a direct IRQ use it, otherwise use the interrupt + * from the WM831x IRQ controller. + */ + if (pdata && pdata->data_irq) + wm831x_ts->data_irq = pdata->data_irq; + else + wm831x_ts->data_irq = platform_get_irq_byname(pdev, "TCHDATA"); + + if (pdata && pdata->pd_irq) + wm831x_ts->pd_irq = pdata->pd_irq; + else + wm831x_ts->pd_irq = platform_get_irq_byname(pdev, "TCHPD"); + + if (pdata) + wm831x_ts->pressure = pdata->pressure; + else + wm831x_ts->pressure = true; + + /* Five wire touchscreens can't report pressure */ + if (pdata && pdata->fivewire) { + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_5WIRE, WM831X_TCH_5WIRE); + + /* Pressure measurements are not possible for five wire mode */ + WARN_ON(pdata->pressure && pdata->fivewire); + wm831x_ts->pressure = false; + } else { + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_5WIRE, 0); + } + + if (pdata) { + switch (pdata->isel) { + default: + dev_err(&pdev->dev, "Unsupported ISEL setting: %d\n", + pdata->isel); + /* Fall through */ + case 200: + case 0: + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_ISEL, 0); + break; + case 400: + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_ISEL, WM831X_TCH_ISEL); + break; + } + } + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_PDONLY, 0); + + /* Default to 96 samples/sec */ + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_RATE_MASK, 6); + + if (pdata && pdata->data_irqf) + irqf = pdata->data_irqf; + else + irqf = IRQF_TRIGGER_HIGH; + + error = request_threaded_irq(wm831x_ts->data_irq, + NULL, wm831x_ts_data_irq, + irqf | IRQF_ONESHOT, + "Touchscreen data", wm831x_ts); + if (error) { + dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n", + wm831x_ts->data_irq, error); + goto err_alloc; + } + disable_irq(wm831x_ts->data_irq); + + if (pdata && pdata->pd_irqf) + irqf = pdata->pd_irqf; + else + irqf = IRQF_TRIGGER_HIGH; + + error = request_threaded_irq(wm831x_ts->pd_irq, + NULL, wm831x_ts_pen_down_irq, + irqf | IRQF_ONESHOT, + "Touchscreen pen down", wm831x_ts); + if (error) { + dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n", + wm831x_ts->pd_irq, error); + goto err_data_irq; + } + + /* set up touch configuration */ + input_dev->name = "WM831x touchscreen"; + input_dev->phys = "wm831x"; + input_dev->open = wm831x_ts_input_open; + input_dev->close = wm831x_ts_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, 0, 4095, 5, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 4095, 5, 0); + if (wm831x_ts->pressure) + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 4095, 5, 0); + + input_set_drvdata(input_dev, wm831x_ts); + input_dev->dev.parent = &pdev->dev; + + error = input_register_device(input_dev); + if (error) + goto err_pd_irq; + + platform_set_drvdata(pdev, wm831x_ts); + return 0; + +err_pd_irq: + free_irq(wm831x_ts->pd_irq, wm831x_ts); +err_data_irq: + free_irq(wm831x_ts->data_irq, wm831x_ts); +err_alloc: + input_free_device(input_dev); + kfree(wm831x_ts); + + return error; +} + +static __devexit int wm831x_ts_remove(struct platform_device *pdev) +{ + struct wm831x_ts *wm831x_ts = platform_get_drvdata(pdev); + + free_irq(wm831x_ts->pd_irq, wm831x_ts); + free_irq(wm831x_ts->data_irq, wm831x_ts); + input_unregister_device(wm831x_ts->input_dev); + kfree(wm831x_ts); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver wm831x_ts_driver = { + .driver = { + .name = "wm831x-touch", + .owner = THIS_MODULE, + }, + .probe = wm831x_ts_probe, + .remove = __devexit_p(wm831x_ts_remove), +}; +module_platform_driver(wm831x_ts_driver); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x PMIC touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-touch"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wm9705.c b/ANDROID_3.4.5/drivers/input/touchscreen/wm9705.c new file mode 100644 index 00000000..adc13a52 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/wm9705.c @@ -0,0 +1,350 @@ +/* + * wm9705.c -- Codec driver for Wolfson WM9705 AC97 Codec. + * + * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC. + * Author: Liam Girdwood <lrg@slimlogic.co.uk> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * Russell King <rmk@arm.linux.org.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/wm97xx.h> + +#define TS_NAME "wm97xx" +#define WM9705_VERSION "1.00" +#define DEFAULT_PRESSURE 0xb0c0 + +/* + * Module parameters + */ + +/* + * Set current used for pressure measurement. + * + * Set pil = 2 to use 400uA + * pil = 1 to use 200uA and + * pil = 0 to disable pressure measurement. + * + * This is used to increase the range of values returned by the adc + * when measureing touchpanel pressure. + */ +static int pil; +module_param(pil, int, 0); +MODULE_PARM_DESC(pil, "Set current used for pressure measurement."); + +/* + * Set threshold for pressure measurement. + * + * Pen down pressure below threshold is ignored. + */ +static int pressure = DEFAULT_PRESSURE & 0xfff; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement."); + +/* + * Set adc sample delay. + * + * For accurate touchpanel measurements, some settling time may be + * required between the switch matrix applying a voltage across the + * touchpanel plate and the ADC sampling the signal. + * + * This delay can be set by setting delay = n, where n is the array + * position of the delay in the array delay_table below. + * Long delays > 1ms are supported for completeness, but are not + * recommended. + */ +static int delay = 4; +module_param(delay, int, 0); +MODULE_PARM_DESC(delay, "Set adc sample delay."); + +/* + * Pen detect comparator threshold. + * + * 0 to Vmid in 15 steps, 0 = use zero power comparator with Vmid threshold + * i.e. 1 = Vmid/15 threshold + * 15 = Vmid/1 threshold + * + * Adjust this value if you are having problems with pen detect not + * detecting any down events. + */ +static int pdd = 8; +module_param(pdd, int, 0); +MODULE_PARM_DESC(pdd, "Set pen detect comparator threshold"); + +/* + * Set adc mask function. + * + * Sources of glitch noise, such as signals driving an LCD display, may feed + * through to the touch screen plates and affect measurement accuracy. In + * order to minimise this, a signal may be applied to the MASK pin to delay or + * synchronise the sampling. + * + * 0 = No delay or sync + * 1 = High on pin stops conversions + * 2 = Edge triggered, edge on pin delays conversion by delay param (above) + * 3 = Edge triggered, edge on pin starts conversion after delay param + */ +static int mask; +module_param(mask, int, 0); +MODULE_PARM_DESC(mask, "Set adc mask function."); + +/* + * ADC sample delay times in uS + */ +static const int delay_table[] = { + 21, /* 1 AC97 Link frames */ + 42, /* 2 */ + 84, /* 4 */ + 167, /* 8 */ + 333, /* 16 */ + 667, /* 32 */ + 1000, /* 48 */ + 1333, /* 64 */ + 2000, /* 96 */ + 2667, /* 128 */ + 3333, /* 160 */ + 4000, /* 192 */ + 4667, /* 224 */ + 5333, /* 256 */ + 6000, /* 288 */ + 0 /* No delay, switch matrix always on */ +}; + +/* + * Delay after issuing a POLL command. + * + * The delay is 3 AC97 link frames + the touchpanel settling delay + */ +static inline void poll_delay(int d) +{ + udelay(3 * AC97_LINK_FRAME + delay_table[d]); +} + +/* + * set up the physical settings of the WM9705 + */ +static void wm9705_phy_init(struct wm97xx *wm) +{ + u16 dig1 = 0, dig2 = WM97XX_RPR; + + /* + * mute VIDEO and AUX as they share X and Y touchscreen + * inputs on the WM9705 + */ + wm97xx_reg_write(wm, AC97_AUX, 0x8000); + wm97xx_reg_write(wm, AC97_VIDEO, 0x8000); + + /* touchpanel pressure current*/ + if (pil == 2) { + dig2 |= WM9705_PIL; + dev_dbg(wm->dev, + "setting pressure measurement current to 400uA."); + } else if (pil) + dev_dbg(wm->dev, + "setting pressure measurement current to 200uA."); + if (!pil) + pressure = 0; + + /* polling mode sample settling delay */ + if (delay != 4) { + if (delay < 0 || delay > 15) { + dev_dbg(wm->dev, "supplied delay out of range."); + delay = 4; + } + } + dig1 &= 0xff0f; + dig1 |= WM97XX_DELAY(delay); + dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.", + delay_table[delay]); + + /* WM9705 pdd */ + dig2 |= (pdd & 0x000f); + dev_dbg(wm->dev, "setting pdd to Vmid/%d", 1 - (pdd & 0x000f)); + + /* mask */ + dig2 |= ((mask & 0x3) << 4); + + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); +} + +static void wm9705_dig_enable(struct wm97xx *wm, int enable) +{ + if (enable) { + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, + wm->dig[2] | WM97XX_PRP_DET_DIG); + wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */ + } else + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, + wm->dig[2] & ~WM97XX_PRP_DET_DIG); +} + +static void wm9705_aux_prepare(struct wm97xx *wm) +{ + memcpy(wm->dig_save, wm->dig, sizeof(wm->dig)); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG); +} + +static void wm9705_dig_restore(struct wm97xx *wm) +{ + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]); +} + +static inline int is_pden(struct wm97xx *wm) +{ + return wm->dig[2] & WM9705_PDEN; +} + +/* + * Read a sample from the WM9705 adc in polling mode. + */ +static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample) +{ + int timeout = 5 * delay; + bool wants_pen = adcsel & WM97XX_PEN_DOWN; + + if (wants_pen && !wm->pen_probably_down) { + u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (!(data & WM97XX_PEN_DOWN)) + return RC_PENUP; + wm->pen_probably_down = 1; + } + + /* set up digitiser */ + if (wm->mach_ops && wm->mach_ops->pre_sample) + wm->mach_ops->pre_sample(adcsel); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK) + | WM97XX_POLL | WM97XX_DELAY(delay)); + + /* wait 3 AC97 time slots + delay for conversion */ + poll_delay(delay); + + /* wait for POLL to go low */ + while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) + && timeout) { + udelay(AC97_LINK_FRAME); + timeout--; + } + + if (timeout == 0) { + /* If PDEN is set, we can get a timeout when pen goes up */ + if (is_pden(wm)) + wm->pen_probably_down = 0; + else + dev_dbg(wm->dev, "adc sample timeout"); + return RC_PENUP; + } + + *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (wm->mach_ops && wm->mach_ops->post_sample) + wm->mach_ops->post_sample(adcsel); + + /* check we have correct sample */ + if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + adcsel & WM97XX_ADCSEL_MASK, + *sample & WM97XX_ADCSEL_MASK); + return RC_PENUP; + } + + if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { + wm->pen_probably_down = 0; + return RC_PENUP; + } + + return RC_VALID; +} + +/* + * Sample the WM9705 touchscreen in polling mode + */ +static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) +{ + int rc; + + rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x); + if (rc != RC_VALID) + return rc; + rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y); + if (rc != RC_VALID) + return rc; + if (pil) { + rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p); + if (rc != RC_VALID) + return rc; + } else + data->p = DEFAULT_PRESSURE; + + return RC_VALID; +} + +/* + * Enable WM9705 continuous mode, i.e. touch data is streamed across + * an AC97 slot + */ +static int wm9705_acc_enable(struct wm97xx *wm, int enable) +{ + u16 dig1, dig2; + int ret = 0; + + dig1 = wm->dig[1]; + dig2 = wm->dig[2]; + + if (enable) { + /* continuous mode */ + if (wm->mach_ops->acc_startup && + (ret = wm->mach_ops->acc_startup(wm)) < 0) + return ret; + dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK | + WM97XX_DELAY_MASK | WM97XX_SLT_MASK); + dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN | + WM97XX_DELAY(delay) | + WM97XX_SLT(wm->acc_slot) | + WM97XX_RATE(wm->acc_rate); + if (pil) + dig1 |= WM97XX_ADCSEL_PRES; + dig2 |= WM9705_PDEN; + } else { + dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN); + dig2 &= ~WM9705_PDEN; + if (wm->mach_ops->acc_shutdown) + wm->mach_ops->acc_shutdown(wm); + } + + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); + + return ret; +} + +struct wm97xx_codec_drv wm9705_codec = { + .id = WM9705_ID2, + .name = "wm9705", + .poll_sample = wm9705_poll_sample, + .poll_touch = wm9705_poll_touch, + .acc_enable = wm9705_acc_enable, + .phy_init = wm9705_phy_init, + .dig_enable = wm9705_dig_enable, + .dig_restore = wm9705_dig_restore, + .aux_prepare = wm9705_aux_prepare, +}; +EXPORT_SYMBOL_GPL(wm9705_codec); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>"); +MODULE_DESCRIPTION("WM9705 Touch Screen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wm9712.c b/ANDROID_3.4.5/drivers/input/touchscreen/wm9712.c new file mode 100644 index 00000000..6e743e3d --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/wm9712.c @@ -0,0 +1,467 @@ +/* + * wm9712.c -- Codec driver for Wolfson WM9712 AC97 Codecs. + * + * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC. + * Author: Liam Girdwood <lrg@slimlogic.co.uk> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * Russell King <rmk@arm.linux.org.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/wm97xx.h> + +#define TS_NAME "wm97xx" +#define WM9712_VERSION "1.00" +#define DEFAULT_PRESSURE 0xb0c0 + +/* + * Module parameters + */ + +/* + * Set internal pull up for pen detect. + * + * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive) + * i.e. pull up resistance = 64k Ohms / rpu. + * + * Adjust this value if you are having problems with pen detect not + * detecting any down event. + */ +static int rpu = 8; +module_param(rpu, int, 0); +MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect."); + +/* + * Set current used for pressure measurement. + * + * Set pil = 2 to use 400uA + * pil = 1 to use 200uA and + * pil = 0 to disable pressure measurement. + * + * This is used to increase the range of values returned by the adc + * when measureing touchpanel pressure. + */ +static int pil; +module_param(pil, int, 0); +MODULE_PARM_DESC(pil, "Set current used for pressure measurement."); + +/* + * Set threshold for pressure measurement. + * + * Pen down pressure below threshold is ignored. + */ +static int pressure = DEFAULT_PRESSURE & 0xfff; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement."); + +/* + * Set adc sample delay. + * + * For accurate touchpanel measurements, some settling time may be + * required between the switch matrix applying a voltage across the + * touchpanel plate and the ADC sampling the signal. + * + * This delay can be set by setting delay = n, where n is the array + * position of the delay in the array delay_table below. + * Long delays > 1ms are supported for completeness, but are not + * recommended. + */ +static int delay = 3; +module_param(delay, int, 0); +MODULE_PARM_DESC(delay, "Set adc sample delay."); + +/* + * Set five_wire = 1 to use a 5 wire touchscreen. + * + * NOTE: Five wire mode does not allow for readback of pressure. + */ +static int five_wire; +module_param(five_wire, int, 0); +MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); + +/* + * Set adc mask function. + * + * Sources of glitch noise, such as signals driving an LCD display, may feed + * through to the touch screen plates and affect measurement accuracy. In + * order to minimise this, a signal may be applied to the MASK pin to delay or + * synchronise the sampling. + * + * 0 = No delay or sync + * 1 = High on pin stops conversions + * 2 = Edge triggered, edge on pin delays conversion by delay param (above) + * 3 = Edge triggered, edge on pin starts conversion after delay param + */ +static int mask; +module_param(mask, int, 0); +MODULE_PARM_DESC(mask, "Set adc mask function."); + +/* + * Coordinate Polling Enable. + * + * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together + * for every poll. + */ +static int coord; +module_param(coord, int, 0); +MODULE_PARM_DESC(coord, "Polling coordinate mode"); + +/* + * ADC sample delay times in uS + */ +static const int delay_table[] = { + 21, /* 1 AC97 Link frames */ + 42, /* 2 */ + 84, /* 4 */ + 167, /* 8 */ + 333, /* 16 */ + 667, /* 32 */ + 1000, /* 48 */ + 1333, /* 64 */ + 2000, /* 96 */ + 2667, /* 128 */ + 3333, /* 160 */ + 4000, /* 192 */ + 4667, /* 224 */ + 5333, /* 256 */ + 6000, /* 288 */ + 0 /* No delay, switch matrix always on */ +}; + +/* + * Delay after issuing a POLL command. + * + * The delay is 3 AC97 link frames + the touchpanel settling delay + */ +static inline void poll_delay(int d) +{ + udelay(3 * AC97_LINK_FRAME + delay_table[d]); +} + +/* + * set up the physical settings of the WM9712 + */ +static void wm9712_phy_init(struct wm97xx *wm) +{ + u16 dig1 = 0; + u16 dig2 = WM97XX_RPR | WM9712_RPU(1); + + /* WM9712 rpu */ + if (rpu) { + dig2 &= 0xffc0; + dig2 |= WM9712_RPU(rpu); + dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms", + 64000 / rpu); + } + + /* WM9712 five wire */ + if (five_wire) { + dig2 |= WM9712_45W; + dev_dbg(wm->dev, "setting 5-wire touchscreen mode."); + + if (pil) { + dev_warn(wm->dev, "pressure measurement is not " + "supported in 5-wire mode\n"); + pil = 0; + } + } + + /* touchpanel pressure current*/ + if (pil == 2) { + dig2 |= WM9712_PIL; + dev_dbg(wm->dev, + "setting pressure measurement current to 400uA."); + } else if (pil) + dev_dbg(wm->dev, + "setting pressure measurement current to 200uA."); + if (!pil) + pressure = 0; + + /* polling mode sample settling delay */ + if (delay < 0 || delay > 15) { + dev_dbg(wm->dev, "supplied delay out of range."); + delay = 4; + } + dig1 &= 0xff0f; + dig1 |= WM97XX_DELAY(delay); + dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.", + delay_table[delay]); + + /* mask */ + dig2 |= ((mask & 0x3) << 6); + if (mask) { + u16 reg; + /* Set GPIO4 as Mask Pin*/ + reg = wm97xx_reg_read(wm, AC97_MISC_AFE); + wm97xx_reg_write(wm, AC97_MISC_AFE, reg | WM97XX_GPIO_4); + reg = wm97xx_reg_read(wm, AC97_GPIO_CFG); + wm97xx_reg_write(wm, AC97_GPIO_CFG, reg | WM97XX_GPIO_4); + } + + /* wait - coord mode */ + if (coord) + dig2 |= WM9712_WAIT; + + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); +} + +static void wm9712_dig_enable(struct wm97xx *wm, int enable) +{ + u16 dig2 = wm->dig[2]; + + if (enable) { + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, + dig2 | WM97XX_PRP_DET_DIG); + wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */ + } else + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, + dig2 & ~WM97XX_PRP_DET_DIG); +} + +static void wm9712_aux_prepare(struct wm97xx *wm) +{ + memcpy(wm->dig_save, wm->dig, sizeof(wm->dig)); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG); +} + +static void wm9712_dig_restore(struct wm97xx *wm) +{ + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]); +} + +static inline int is_pden(struct wm97xx *wm) +{ + return wm->dig[2] & WM9712_PDEN; +} + +/* + * Read a sample from the WM9712 adc in polling mode. + */ +static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) +{ + int timeout = 5 * delay; + bool wants_pen = adcsel & WM97XX_PEN_DOWN; + + if (wants_pen && !wm->pen_probably_down) { + u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (!(data & WM97XX_PEN_DOWN)) + return RC_PENUP; + wm->pen_probably_down = 1; + } + + /* set up digitiser */ + if (wm->mach_ops && wm->mach_ops->pre_sample) + wm->mach_ops->pre_sample(adcsel); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK) + | WM97XX_POLL | WM97XX_DELAY(delay)); + + /* wait 3 AC97 time slots + delay for conversion */ + poll_delay(delay); + + /* wait for POLL to go low */ + while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) + && timeout) { + udelay(AC97_LINK_FRAME); + timeout--; + } + + if (timeout <= 0) { + /* If PDEN is set, we can get a timeout when pen goes up */ + if (is_pden(wm)) + wm->pen_probably_down = 0; + else + dev_dbg(wm->dev, "adc sample timeout"); + return RC_PENUP; + } + + *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (wm->mach_ops && wm->mach_ops->post_sample) + wm->mach_ops->post_sample(adcsel); + + /* check we have correct sample */ + if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + adcsel & WM97XX_ADCSEL_MASK, + *sample & WM97XX_ADCSEL_MASK); + return RC_PENUP; + } + + if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { + wm->pen_probably_down = 0; + return RC_PENUP; + } + + return RC_VALID; +} + +/* + * Read a coord from the WM9712 adc in polling mode. + */ +static int wm9712_poll_coord(struct wm97xx *wm, struct wm97xx_data *data) +{ + int timeout = 5 * delay; + + if (!wm->pen_probably_down) { + u16 data_rd = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (!(data_rd & WM97XX_PEN_DOWN)) + return RC_PENUP; + wm->pen_probably_down = 1; + } + + /* set up digitiser */ + if (wm->mach_ops && wm->mach_ops->pre_sample) + wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); + + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, + WM97XX_COO | WM97XX_POLL | WM97XX_DELAY(delay)); + + /* wait 3 AC97 time slots + delay for conversion and read x */ + poll_delay(delay); + data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + /* wait for POLL to go low */ + while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) + && timeout) { + udelay(AC97_LINK_FRAME); + timeout--; + } + + if (timeout <= 0) { + /* If PDEN is set, we can get a timeout when pen goes up */ + if (is_pden(wm)) + wm->pen_probably_down = 0; + else + dev_dbg(wm->dev, "adc sample timeout"); + return RC_PENUP; + } + + /* read back y data */ + data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (pil) + data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + else + data->p = DEFAULT_PRESSURE; + + if (wm->mach_ops && wm->mach_ops->post_sample) + wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); + + /* check we have correct sample */ + if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y)) + goto err; + if (pil && !(data->p & WM97XX_ADCSEL_PRES)) + goto err; + + if (!(data->x & WM97XX_PEN_DOWN) || !(data->y & WM97XX_PEN_DOWN)) { + wm->pen_probably_down = 0; + return RC_PENUP; + } + return RC_VALID; +err: + return 0; +} + +/* + * Sample the WM9712 touchscreen in polling mode + */ +static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) +{ + int rc; + + if (coord) { + rc = wm9712_poll_coord(wm, data); + if (rc != RC_VALID) + return rc; + } else { + rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, + &data->x); + if (rc != RC_VALID) + return rc; + + rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, + &data->y); + if (rc != RC_VALID) + return rc; + + if (pil && !five_wire) { + rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, + &data->p); + if (rc != RC_VALID) + return rc; + } else + data->p = DEFAULT_PRESSURE; + } + return RC_VALID; +} + +/* + * Enable WM9712 continuous mode, i.e. touch data is streamed across + * an AC97 slot + */ +static int wm9712_acc_enable(struct wm97xx *wm, int enable) +{ + u16 dig1, dig2; + int ret = 0; + + dig1 = wm->dig[1]; + dig2 = wm->dig[2]; + + if (enable) { + /* continuous mode */ + if (wm->mach_ops->acc_startup) { + ret = wm->mach_ops->acc_startup(wm); + if (ret < 0) + return ret; + } + dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK | + WM97XX_DELAY_MASK | WM97XX_SLT_MASK); + dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN | + WM97XX_DELAY(delay) | + WM97XX_SLT(wm->acc_slot) | + WM97XX_RATE(wm->acc_rate); + if (pil) + dig1 |= WM97XX_ADCSEL_PRES; + dig2 |= WM9712_PDEN; + } else { + dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN); + dig2 &= ~WM9712_PDEN; + if (wm->mach_ops->acc_shutdown) + wm->mach_ops->acc_shutdown(wm); + } + + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); + + return 0; +} + +struct wm97xx_codec_drv wm9712_codec = { + .id = WM9712_ID2, + .name = "wm9712", + .poll_sample = wm9712_poll_sample, + .poll_touch = wm9712_poll_touch, + .acc_enable = wm9712_acc_enable, + .phy_init = wm9712_phy_init, + .dig_enable = wm9712_dig_enable, + .dig_restore = wm9712_dig_restore, + .aux_prepare = wm9712_aux_prepare, +}; +EXPORT_SYMBOL_GPL(wm9712_codec); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>"); +MODULE_DESCRIPTION("WM9712 Touch Screen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wm9713.c b/ANDROID_3.4.5/drivers/input/touchscreen/wm9713.c new file mode 100644 index 00000000..74053531 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/wm9713.c @@ -0,0 +1,481 @@ +/* + * wm9713.c -- Codec touch driver for Wolfson WM9713 AC97 Codec. + * + * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC. + * Author: Liam Girdwood <lrg@slimlogic.co.uk> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * Russell King <rmk@arm.linux.org.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/wm97xx.h> + +#define TS_NAME "wm97xx" +#define WM9713_VERSION "1.00" +#define DEFAULT_PRESSURE 0xb0c0 + +/* + * Module parameters + */ + +/* + * Set internal pull up for pen detect. + * + * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive) + * i.e. pull up resistance = 64k Ohms / rpu. + * + * Adjust this value if you are having problems with pen detect not + * detecting any down event. + */ +static int rpu = 8; +module_param(rpu, int, 0); +MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect."); + +/* + * Set current used for pressure measurement. + * + * Set pil = 2 to use 400uA + * pil = 1 to use 200uA and + * pil = 0 to disable pressure measurement. + * + * This is used to increase the range of values returned by the adc + * when measureing touchpanel pressure. + */ +static int pil; +module_param(pil, int, 0); +MODULE_PARM_DESC(pil, "Set current used for pressure measurement."); + +/* + * Set threshold for pressure measurement. + * + * Pen down pressure below threshold is ignored. + */ +static int pressure = DEFAULT_PRESSURE & 0xfff; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement."); + +/* + * Set adc sample delay. + * + * For accurate touchpanel measurements, some settling time may be + * required between the switch matrix applying a voltage across the + * touchpanel plate and the ADC sampling the signal. + * + * This delay can be set by setting delay = n, where n is the array + * position of the delay in the array delay_table below. + * Long delays > 1ms are supported for completeness, but are not + * recommended. + */ +static int delay = 4; +module_param(delay, int, 0); +MODULE_PARM_DESC(delay, "Set adc sample delay."); + +/* + * Set five_wire = 1 to use a 5 wire touchscreen. + * + * NOTE: Five wire mode does not allow for readback of pressure. + */ +static int five_wire; +module_param(five_wire, int, 0); +MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); + +/* + * Set adc mask function. + * + * Sources of glitch noise, such as signals driving an LCD display, may feed + * through to the touch screen plates and affect measurement accuracy. In + * order to minimise this, a signal may be applied to the MASK pin to delay or + * synchronise the sampling. + * + * 0 = No delay or sync + * 1 = High on pin stops conversions + * 2 = Edge triggered, edge on pin delays conversion by delay param (above) + * 3 = Edge triggered, edge on pin starts conversion after delay param + */ +static int mask; +module_param(mask, int, 0); +MODULE_PARM_DESC(mask, "Set adc mask function."); + +/* + * Coordinate Polling Enable. + * + * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together + * for every poll. + */ +static int coord; +module_param(coord, int, 0); +MODULE_PARM_DESC(coord, "Polling coordinate mode"); + +/* + * ADC sample delay times in uS + */ +static const int delay_table[] = { + 21, /* 1 AC97 Link frames */ + 42, /* 2 */ + 84, /* 4 */ + 167, /* 8 */ + 333, /* 16 */ + 667, /* 32 */ + 1000, /* 48 */ + 1333, /* 64 */ + 2000, /* 96 */ + 2667, /* 128 */ + 3333, /* 160 */ + 4000, /* 192 */ + 4667, /* 224 */ + 5333, /* 256 */ + 6000, /* 288 */ + 0 /* No delay, switch matrix always on */ +}; + +/* + * Delay after issuing a POLL command. + * + * The delay is 3 AC97 link frames + the touchpanel settling delay + */ +static inline void poll_delay(int d) +{ + udelay(3 * AC97_LINK_FRAME + delay_table[d]); +} + +/* + * set up the physical settings of the WM9713 + */ +static void wm9713_phy_init(struct wm97xx *wm) +{ + u16 dig1 = 0, dig2, dig3; + + /* default values */ + dig2 = WM97XX_DELAY(4) | WM97XX_SLT(5); + dig3 = WM9712_RPU(1); + + /* rpu */ + if (rpu) { + dig3 &= 0xffc0; + dig3 |= WM9712_RPU(rpu); + dev_info(wm->dev, "setting pen detect pull-up to %d Ohms\n", + 64000 / rpu); + } + + /* Five wire panel? */ + if (five_wire) { + dig3 |= WM9713_45W; + dev_info(wm->dev, "setting 5-wire touchscreen mode."); + + if (pil) { + dev_warn(wm->dev, + "Pressure measurement not supported in 5 " + "wire mode, disabling\n"); + pil = 0; + } + } + + /* touchpanel pressure */ + if (pil == 2) { + dig3 |= WM9712_PIL; + dev_info(wm->dev, + "setting pressure measurement current to 400uA."); + } else if (pil) + dev_info(wm->dev, + "setting pressure measurement current to 200uA."); + if (!pil) + pressure = 0; + + /* sample settling delay */ + if (delay < 0 || delay > 15) { + dev_info(wm->dev, "supplied delay out of range."); + delay = 4; + dev_info(wm->dev, "setting adc sample delay to %d u Secs.", + delay_table[delay]); + } + dig2 &= 0xff0f; + dig2 |= WM97XX_DELAY(delay); + + /* mask */ + dig3 |= ((mask & 0x3) << 4); + if (coord) + dig3 |= WM9713_WAIT; + + wm->misc = wm97xx_reg_read(wm, 0x5a); + + wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1); + wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2); + wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3); + wm97xx_reg_write(wm, AC97_GPIO_STICKY, 0x0); +} + +static void wm9713_dig_enable(struct wm97xx *wm, int enable) +{ + u16 val; + + if (enable) { + val = wm97xx_reg_read(wm, AC97_EXTENDED_MID); + wm97xx_reg_write(wm, AC97_EXTENDED_MID, val & 0x7fff); + wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] | + WM97XX_PRP_DET_DIG); + wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */ + } else { + wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] & + ~WM97XX_PRP_DET_DIG); + val = wm97xx_reg_read(wm, AC97_EXTENDED_MID); + wm97xx_reg_write(wm, AC97_EXTENDED_MID, val | 0x8000); + } +} + +static void wm9713_dig_restore(struct wm97xx *wm) +{ + wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig_save[0]); + wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig_save[1]); + wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig_save[2]); +} + +static void wm9713_aux_prepare(struct wm97xx *wm) +{ + memcpy(wm->dig_save, wm->dig, sizeof(wm->dig)); + wm97xx_reg_write(wm, AC97_WM9713_DIG1, 0); + wm97xx_reg_write(wm, AC97_WM9713_DIG2, 0); + wm97xx_reg_write(wm, AC97_WM9713_DIG3, WM97XX_PRP_DET_DIG); +} + +static inline int is_pden(struct wm97xx *wm) +{ + return wm->dig[2] & WM9713_PDEN; +} + +/* + * Read a sample from the WM9713 adc in polling mode. + */ +static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample) +{ + u16 dig1; + int timeout = 5 * delay; + bool wants_pen = adcsel & WM97XX_PEN_DOWN; + + if (wants_pen && !wm->pen_probably_down) { + u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (!(data & WM97XX_PEN_DOWN)) + return RC_PENUP; + wm->pen_probably_down = 1; + } + + /* set up digitiser */ + dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1); + dig1 &= ~WM9713_ADCSEL_MASK; + /* WM97XX_ADCSEL_* channels need to be converted to WM9713 format */ + dig1 |= 1 << ((adcsel & WM97XX_ADCSEL_MASK) >> 12); + + if (wm->mach_ops && wm->mach_ops->pre_sample) + wm->mach_ops->pre_sample(adcsel); + wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | WM9713_POLL); + + /* wait 3 AC97 time slots + delay for conversion */ + poll_delay(delay); + + /* wait for POLL to go low */ + while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) && + timeout) { + udelay(AC97_LINK_FRAME); + timeout--; + } + + if (timeout <= 0) { + /* If PDEN is set, we can get a timeout when pen goes up */ + if (is_pden(wm)) + wm->pen_probably_down = 0; + else + dev_dbg(wm->dev, "adc sample timeout"); + return RC_PENUP; + } + + *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (wm->mach_ops && wm->mach_ops->post_sample) + wm->mach_ops->post_sample(adcsel); + + /* check we have correct sample */ + if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + adcsel & WM97XX_ADCSEL_MASK, + *sample & WM97XX_ADCSEL_MASK); + return RC_PENUP; + } + + if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { + wm->pen_probably_down = 0; + return RC_PENUP; + } + + return RC_VALID; +} + +/* + * Read a coordinate from the WM9713 adc in polling mode. + */ +static int wm9713_poll_coord(struct wm97xx *wm, struct wm97xx_data *data) +{ + u16 dig1; + int timeout = 5 * delay; + + if (!wm->pen_probably_down) { + u16 val = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (!(val & WM97XX_PEN_DOWN)) + return RC_PENUP; + wm->pen_probably_down = 1; + } + + /* set up digitiser */ + dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1); + dig1 &= ~WM9713_ADCSEL_MASK; + if (pil) + dig1 |= WM9713_ADCSEL_PRES; + + if (wm->mach_ops && wm->mach_ops->pre_sample) + wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); + wm97xx_reg_write(wm, AC97_WM9713_DIG1, + dig1 | WM9713_POLL | WM9713_COO); + + /* wait 3 AC97 time slots + delay for conversion */ + poll_delay(delay); + data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + /* wait for POLL to go low */ + while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) + && timeout) { + udelay(AC97_LINK_FRAME); + timeout--; + } + + if (timeout <= 0) { + /* If PDEN is set, we can get a timeout when pen goes up */ + if (is_pden(wm)) + wm->pen_probably_down = 0; + else + dev_dbg(wm->dev, "adc sample timeout"); + return RC_PENUP; + } + + /* read back data */ + data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (pil) + data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + else + data->p = DEFAULT_PRESSURE; + + if (wm->mach_ops && wm->mach_ops->post_sample) + wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); + + /* check we have correct sample */ + if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y)) + goto err; + if (pil && !(data->p & WM97XX_ADCSEL_PRES)) + goto err; + + if (!(data->x & WM97XX_PEN_DOWN) || !(data->y & WM97XX_PEN_DOWN)) { + wm->pen_probably_down = 0; + return RC_PENUP; + } + return RC_VALID; +err: + return 0; +} + +/* + * Sample the WM9713 touchscreen in polling mode + */ +static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) +{ + int rc; + + if (coord) { + rc = wm9713_poll_coord(wm, data); + if (rc != RC_VALID) + return rc; + } else { + rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x); + if (rc != RC_VALID) + return rc; + rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y); + if (rc != RC_VALID) + return rc; + if (pil) { + rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, + &data->p); + if (rc != RC_VALID) + return rc; + } else + data->p = DEFAULT_PRESSURE; + } + return RC_VALID; +} + +/* + * Enable WM9713 continuous mode, i.e. touch data is streamed across + * an AC97 slot + */ +static int wm9713_acc_enable(struct wm97xx *wm, int enable) +{ + u16 dig1, dig2, dig3; + int ret = 0; + + dig1 = wm->dig[0]; + dig2 = wm->dig[1]; + dig3 = wm->dig[2]; + + if (enable) { + /* continuous mode */ + if (wm->mach_ops->acc_startup && + (ret = wm->mach_ops->acc_startup(wm)) < 0) + return ret; + + dig1 &= ~WM9713_ADCSEL_MASK; + dig1 |= WM9713_CTC | WM9713_COO | WM9713_ADCSEL_X | + WM9713_ADCSEL_Y; + if (pil) + dig1 |= WM9713_ADCSEL_PRES; + dig2 &= ~(WM97XX_DELAY_MASK | WM97XX_SLT_MASK | + WM97XX_CM_RATE_MASK); + dig2 |= WM97XX_SLEN | WM97XX_DELAY(delay) | + WM97XX_SLT(wm->acc_slot) | WM97XX_RATE(wm->acc_rate); + dig3 |= WM9713_PDEN; + } else { + dig1 &= ~(WM9713_CTC | WM9713_COO); + dig2 &= ~WM97XX_SLEN; + dig3 &= ~WM9713_PDEN; + if (wm->mach_ops->acc_shutdown) + wm->mach_ops->acc_shutdown(wm); + } + + wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1); + wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2); + wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3); + + return ret; +} + +struct wm97xx_codec_drv wm9713_codec = { + .id = WM9713_ID2, + .name = "wm9713", + .poll_sample = wm9713_poll_sample, + .poll_touch = wm9713_poll_touch, + .acc_enable = wm9713_acc_enable, + .phy_init = wm9713_phy_init, + .dig_enable = wm9713_dig_enable, + .dig_restore = wm9713_dig_restore, + .aux_prepare = wm9713_aux_prepare, +}; +EXPORT_SYMBOL_GPL(wm9713_codec); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>"); +MODULE_DESCRIPTION("WM9713 Touch Screen Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wm97xx-core.c b/ANDROID_3.4.5/drivers/input/touchscreen/wm97xx-core.c new file mode 100644 index 00000000..5dbe73af --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/wm97xx-core.c @@ -0,0 +1,848 @@ +/* + * wm97xx-core.c -- Touch screen driver core for Wolfson WM9705, WM9712 + * and WM9713 AC97 Codecs. + * + * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC. + * Author: Liam Girdwood <lrg@slimlogic.co.uk> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * Russell King <rmk@arm.linux.org.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Notes: + * + * Features: + * - supports WM9705, WM9712, WM9713 + * - polling mode + * - continuous mode (arch-dependent) + * - adjustable rpu/dpp settings + * - adjustable pressure current + * - adjustable sample settle delay + * - 4 and 5 wire touchscreens (5 wire is WM9712 only) + * - pen down detection + * - battery monitor + * - sample AUX adcs + * - power management + * - codec GPIO + * - codec event notification + * Todo + * - Support for async sampling control for noisy LCDs. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/proc_fs.h> +#include <linux/pm.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/workqueue.h> +#include <linux/wm97xx.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define TS_NAME "wm97xx" +#define WM_CORE_VERSION "1.00" +#define DEFAULT_PRESSURE 0xb0c0 + + +/* + * Touchscreen absolute values + * + * These parameters are used to help the input layer discard out of + * range readings and reduce jitter etc. + * + * o min, max:- indicate the min and max values your touch screen returns + * o fuzz:- use a higher number to reduce jitter + * + * The default values correspond to Mainstone II in QVGA mode + * + * Please read + * Documentation/input/input-programming.txt for more details. + */ + +static int abs_x[3] = {350, 3900, 5}; +module_param_array(abs_x, int, NULL, 0); +MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz"); + +static int abs_y[3] = {320, 3750, 40}; +module_param_array(abs_y, int, NULL, 0); +MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz"); + +static int abs_p[3] = {0, 150, 4}; +module_param_array(abs_p, int, NULL, 0); +MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz"); + +/* + * wm97xx IO access, all IO locking done by AC97 layer + */ +int wm97xx_reg_read(struct wm97xx *wm, u16 reg) +{ + if (wm->ac97) + return wm->ac97->bus->ops->read(wm->ac97, reg); + else + return -1; +} +EXPORT_SYMBOL_GPL(wm97xx_reg_read); + +void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val) +{ + /* cache digitiser registers */ + if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3) + wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val; + + /* cache gpio regs */ + if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE) + wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val; + + /* wm9713 irq reg */ + if (reg == 0x5a) + wm->misc = val; + + if (wm->ac97) + wm->ac97->bus->ops->write(wm->ac97, reg, val); +} +EXPORT_SYMBOL_GPL(wm97xx_reg_write); + +/** + * wm97xx_read_aux_adc - Read the aux adc. + * @wm: wm97xx device. + * @adcsel: codec ADC to be read + * + * Reads the selected AUX ADC. + */ + +int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel) +{ + int power_adc = 0, auxval; + u16 power = 0; + int rc = 0; + int timeout = 0; + + /* get codec */ + mutex_lock(&wm->codec_mutex); + + /* When the touchscreen is not in use, we may have to power up + * the AUX ADC before we can use sample the AUX inputs-> + */ + if (wm->id == WM9713_ID2 && + (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) { + power_adc = 1; + wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff); + } + + /* Prepare the codec for AUX reading */ + wm->codec->aux_prepare(wm); + + /* Turn polling mode on to read AUX ADC */ + wm->pen_probably_down = 1; + + while (rc != RC_VALID && timeout++ < 5) + rc = wm->codec->poll_sample(wm, adcsel, &auxval); + + if (power_adc) + wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000); + + wm->codec->dig_restore(wm); + + wm->pen_probably_down = 0; + + if (timeout >= 5) { + dev_err(wm->dev, + "timeout reading auxadc %d, disabling digitiser\n", + adcsel); + wm->codec->dig_enable(wm, false); + } + + mutex_unlock(&wm->codec_mutex); + return (rc == RC_VALID ? auxval & 0xfff : -EBUSY); +} +EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc); + +/** + * wm97xx_get_gpio - Get the status of a codec GPIO. + * @wm: wm97xx device. + * @gpio: gpio + * + * Get the status of a codec GPIO pin + */ + +enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio) +{ + u16 status; + enum wm97xx_gpio_status ret; + + mutex_lock(&wm->codec_mutex); + status = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + + if (status & gpio) + ret = WM97XX_GPIO_HIGH; + else + ret = WM97XX_GPIO_LOW; + + mutex_unlock(&wm->codec_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm97xx_get_gpio); + +/** + * wm97xx_set_gpio - Set the status of a codec GPIO. + * @wm: wm97xx device. + * @gpio: gpio + * + * + * Set the status of a codec GPIO pin + */ + +void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio, + enum wm97xx_gpio_status status) +{ + u16 reg; + + mutex_lock(&wm->codec_mutex); + reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + + if (status == WM97XX_GPIO_HIGH) + reg |= gpio; + else + reg &= ~gpio; + + if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613) + wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1); + else + wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg); + mutex_unlock(&wm->codec_mutex); +} +EXPORT_SYMBOL_GPL(wm97xx_set_gpio); + +/* + * Codec GPIO pin configuration, this sets pin direction, polarity, + * stickyness and wake up. + */ +void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir, + enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky, + enum wm97xx_gpio_wake wake) +{ + u16 reg; + + mutex_lock(&wm->codec_mutex); + reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); + + if (pol == WM97XX_GPIO_POL_HIGH) + reg |= gpio; + else + reg &= ~gpio; + + wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg); + reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY); + + if (sticky == WM97XX_GPIO_STICKY) + reg |= gpio; + else + reg &= ~gpio; + + wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg); + reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); + + if (wake == WM97XX_GPIO_WAKE) + reg |= gpio; + else + reg &= ~gpio; + + wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg); + reg = wm97xx_reg_read(wm, AC97_GPIO_CFG); + + if (dir == WM97XX_GPIO_IN) + reg |= gpio; + else + reg &= ~gpio; + + wm97xx_reg_write(wm, AC97_GPIO_CFG, reg); + mutex_unlock(&wm->codec_mutex); +} +EXPORT_SYMBOL_GPL(wm97xx_config_gpio); + +/* + * Configure the WM97XX_PRP value to use while system is suspended. + * If a value other than 0 is set then WM97xx pen detection will be + * left enabled in the configured mode while the system is in suspend, + * the device has users and suspend has not been disabled via the + * wakeup sysfs entries. + * + * @wm: WM97xx device to configure + * @mode: WM97XX_PRP value to configure while suspended + */ +void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode) +{ + wm->suspend_mode = mode; + device_init_wakeup(&wm->input_dev->dev, mode != 0); +} +EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode); + +/* + * Handle a pen down interrupt. + */ +static void wm97xx_pen_irq_worker(struct work_struct *work) +{ + struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work); + int pen_was_down = wm->pen_is_down; + + /* do we need to enable the touch panel reader */ + if (wm->id == WM9705_ID2) { + if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) & + WM97XX_PEN_DOWN) + wm->pen_is_down = 1; + else + wm->pen_is_down = 0; + } else { + u16 status, pol; + mutex_lock(&wm->codec_mutex); + status = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); + + if (WM97XX_GPIO_13 & pol & status) { + wm->pen_is_down = 1; + wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol & + ~WM97XX_GPIO_13); + } else { + wm->pen_is_down = 0; + wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol | + WM97XX_GPIO_13); + } + + if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613) + wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status & + ~WM97XX_GPIO_13) << 1); + else + wm97xx_reg_write(wm, AC97_GPIO_STATUS, status & + ~WM97XX_GPIO_13); + mutex_unlock(&wm->codec_mutex); + } + + /* If the system is not using continuous mode or it provides a + * pen down operation then we need to schedule polls while the + * pen is down. Otherwise the machine driver is responsible + * for scheduling reads. + */ + if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) { + if (wm->pen_is_down && !pen_was_down) { + /* Data is not available immediately on pen down */ + queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1); + } + + /* Let ts_reader report the pen up for debounce. */ + if (!wm->pen_is_down && pen_was_down) + wm->pen_is_down = 1; + } + + if (!wm->pen_is_down && wm->mach_ops->acc_enabled) + wm->mach_ops->acc_pen_up(wm); + + wm->mach_ops->irq_enable(wm, 1); +} + +/* + * Codec PENDOWN irq handler + * + * We have to disable the codec interrupt in the handler because it + * can take up to 1ms to clear the interrupt source. We schedule a task + * in a work queue to do the actual interaction with the chip. The + * interrupt is then enabled again in the slow handler when the source + * has been cleared. + */ +static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) +{ + struct wm97xx *wm = dev_id; + + if (!work_pending(&wm->pen_event_work)) { + wm->mach_ops->irq_enable(wm, 0); + queue_work(wm->ts_workq, &wm->pen_event_work); + } + + return IRQ_HANDLED; +} + +/* + * initialise pen IRQ handler and workqueue + */ +static int wm97xx_init_pen_irq(struct wm97xx *wm) +{ + u16 reg; + + /* If an interrupt is supplied an IRQ enable operation must also be + * provided. */ + BUG_ON(!wm->mach_ops->irq_enable); + + if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, + "wm97xx-pen", wm)) { + dev_err(wm->dev, + "Failed to register pen down interrupt, polling"); + wm->pen_irq = 0; + return -EINVAL; + } + + /* Configure GPIO as interrupt source on WM971x */ + if (wm->id != WM9705_ID2) { + BUG_ON(!wm->mach_ops->irq_gpio); + reg = wm97xx_reg_read(wm, AC97_MISC_AFE); + wm97xx_reg_write(wm, AC97_MISC_AFE, + reg & ~(wm->mach_ops->irq_gpio)); + reg = wm97xx_reg_read(wm, 0x5a); + wm97xx_reg_write(wm, 0x5a, reg & ~0x0001); + } + + return 0; +} + +static int wm97xx_read_samples(struct wm97xx *wm) +{ + struct wm97xx_data data; + int rc; + + mutex_lock(&wm->codec_mutex); + + if (wm->mach_ops && wm->mach_ops->acc_enabled) + rc = wm->mach_ops->acc_pen_down(wm); + else + rc = wm->codec->poll_touch(wm, &data); + + if (rc & RC_PENUP) { + if (wm->pen_is_down) { + wm->pen_is_down = 0; + dev_dbg(wm->dev, "pen up\n"); + input_report_abs(wm->input_dev, ABS_PRESSURE, 0); + input_report_key(wm->input_dev, BTN_TOUCH, 0); + input_sync(wm->input_dev); + } else if (!(rc & RC_AGAIN)) { + /* We need high frequency updates only while + * pen is down, the user never will be able to + * touch screen faster than a few times per + * second... On the other hand, when the user + * is actively working with the touchscreen we + * don't want to lose the quick response. So we + * will slowly increase sleep time after the + * pen is up and quicky restore it to ~one task + * switch when pen is down again. + */ + if (wm->ts_reader_interval < HZ / 10) + wm->ts_reader_interval++; + } + + } else if (rc & RC_VALID) { + dev_dbg(wm->dev, + "pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n", + data.x >> 12, data.x & 0xfff, data.y >> 12, + data.y & 0xfff, data.p >> 12, data.p & 0xfff); + input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff); + input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff); + input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, 1); + input_sync(wm->input_dev); + wm->pen_is_down = 1; + wm->ts_reader_interval = wm->ts_reader_min_interval; + } else if (rc & RC_PENDOWN) { + dev_dbg(wm->dev, "pen down\n"); + wm->pen_is_down = 1; + wm->ts_reader_interval = wm->ts_reader_min_interval; + } + + mutex_unlock(&wm->codec_mutex); + return rc; +} + +/* +* The touchscreen sample reader. +*/ +static void wm97xx_ts_reader(struct work_struct *work) +{ + int rc; + struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work); + + BUG_ON(!wm->codec); + + do { + rc = wm97xx_read_samples(wm); + } while (rc & RC_AGAIN); + + if (wm->pen_is_down || !wm->pen_irq) + queue_delayed_work(wm->ts_workq, &wm->ts_reader, + wm->ts_reader_interval); +} + +/** + * wm97xx_ts_input_open - Open the touch screen input device. + * @idev: Input device to be opened. + * + * Called by the input sub system to open a wm97xx touchscreen device. + * Starts the touchscreen thread and touch digitiser. + */ +static int wm97xx_ts_input_open(struct input_dev *idev) +{ + struct wm97xx *wm = input_get_drvdata(idev); + + wm->ts_workq = create_singlethread_workqueue("kwm97xx"); + if (wm->ts_workq == NULL) { + dev_err(wm->dev, + "Failed to create workqueue\n"); + return -EINVAL; + } + + /* start digitiser */ + if (wm->mach_ops && wm->mach_ops->acc_enabled) + wm->codec->acc_enable(wm, 1); + wm->codec->dig_enable(wm, 1); + + INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader); + INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker); + + wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1; + if (wm->ts_reader_min_interval < 1) + wm->ts_reader_min_interval = 1; + wm->ts_reader_interval = wm->ts_reader_min_interval; + + wm->pen_is_down = 0; + if (wm->pen_irq) + wm97xx_init_pen_irq(wm); + else + dev_err(wm->dev, "No IRQ specified\n"); + + /* If we either don't have an interrupt for pen down events or + * failed to acquire it then we need to poll. + */ + if (wm->pen_irq == 0) + queue_delayed_work(wm->ts_workq, &wm->ts_reader, + wm->ts_reader_interval); + + return 0; +} + +/** + * wm97xx_ts_input_close - Close the touch screen input device. + * @idev: Input device to be closed. + * + * Called by the input sub system to close a wm97xx touchscreen + * device. Kills the touchscreen thread and stops the touch + * digitiser. + */ + +static void wm97xx_ts_input_close(struct input_dev *idev) +{ + struct wm97xx *wm = input_get_drvdata(idev); + u16 reg; + + if (wm->pen_irq) { + /* Return the interrupt to GPIO usage (disabling it) */ + if (wm->id != WM9705_ID2) { + BUG_ON(!wm->mach_ops->irq_gpio); + reg = wm97xx_reg_read(wm, AC97_MISC_AFE); + wm97xx_reg_write(wm, AC97_MISC_AFE, + reg | wm->mach_ops->irq_gpio); + } + + free_irq(wm->pen_irq, wm); + } + + wm->pen_is_down = 0; + + /* Balance out interrupt disables/enables */ + if (cancel_work_sync(&wm->pen_event_work)) + wm->mach_ops->irq_enable(wm, 1); + + /* ts_reader rearms itself so we need to explicitly stop it + * before we destroy the workqueue. + */ + cancel_delayed_work_sync(&wm->ts_reader); + + destroy_workqueue(wm->ts_workq); + + /* stop digitiser */ + wm->codec->dig_enable(wm, 0); + if (wm->mach_ops && wm->mach_ops->acc_enabled) + wm->codec->acc_enable(wm, 0); +} + +static int wm97xx_probe(struct device *dev) +{ + struct wm97xx *wm; + struct wm97xx_pdata *pdata = dev->platform_data; + int ret = 0, id = 0; + + wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL); + if (!wm) + return -ENOMEM; + mutex_init(&wm->codec_mutex); + + wm->dev = dev; + dev_set_drvdata(dev, wm); + wm->ac97 = to_ac97_t(dev); + + /* check that we have a supported codec */ + id = wm97xx_reg_read(wm, AC97_VENDOR_ID1); + if (id != WM97XX_ID1) { + dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id); + ret = -ENODEV; + goto alloc_err; + } + + wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2); + + wm->variant = WM97xx_GENERIC; + + dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff); + + switch (wm->id & 0xff) { +#ifdef CONFIG_TOUCHSCREEN_WM9705 + case 0x05: + wm->codec = &wm9705_codec; + break; +#endif +#ifdef CONFIG_TOUCHSCREEN_WM9712 + case 0x12: + wm->codec = &wm9712_codec; + break; +#endif +#ifdef CONFIG_TOUCHSCREEN_WM9713 + case 0x13: + wm->codec = &wm9713_codec; + break; +#endif + default: + dev_err(wm->dev, "Support for wm97%02x not compiled in.\n", + wm->id & 0xff); + ret = -ENODEV; + goto alloc_err; + } + + /* set up physical characteristics */ + wm->codec->phy_init(wm); + + /* load gpio cache */ + wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); + wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); + wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); + wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); + wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); + + wm->input_dev = input_allocate_device(); + if (wm->input_dev == NULL) { + ret = -ENOMEM; + goto alloc_err; + } + + /* set up touch configuration */ + wm->input_dev->name = "wm97xx touchscreen"; + wm->input_dev->phys = "wm97xx"; + wm->input_dev->open = wm97xx_ts_input_open; + wm->input_dev->close = wm97xx_ts_input_close; + + __set_bit(EV_ABS, wm->input_dev->evbit); + __set_bit(EV_KEY, wm->input_dev->evbit); + __set_bit(BTN_TOUCH, wm->input_dev->keybit); + + input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1], + abs_x[2], 0); + input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1], + abs_y[2], 0); + input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1], + abs_p[2], 0); + + input_set_drvdata(wm->input_dev, wm); + wm->input_dev->dev.parent = dev; + + ret = input_register_device(wm->input_dev); + if (ret < 0) + goto dev_alloc_err; + + /* register our battery device */ + wm->battery_dev = platform_device_alloc("wm97xx-battery", -1); + if (!wm->battery_dev) { + ret = -ENOMEM; + goto batt_err; + } + platform_set_drvdata(wm->battery_dev, wm); + wm->battery_dev->dev.parent = dev; + wm->battery_dev->dev.platform_data = pdata; + ret = platform_device_add(wm->battery_dev); + if (ret < 0) + goto batt_reg_err; + + /* register our extended touch device (for machine specific + * extensions) */ + wm->touch_dev = platform_device_alloc("wm97xx-touch", -1); + if (!wm->touch_dev) { + ret = -ENOMEM; + goto touch_err; + } + platform_set_drvdata(wm->touch_dev, wm); + wm->touch_dev->dev.parent = dev; + wm->touch_dev->dev.platform_data = pdata; + ret = platform_device_add(wm->touch_dev); + if (ret < 0) + goto touch_reg_err; + + return ret; + + touch_reg_err: + platform_device_put(wm->touch_dev); + touch_err: + platform_device_del(wm->battery_dev); + batt_reg_err: + platform_device_put(wm->battery_dev); + batt_err: + input_unregister_device(wm->input_dev); + wm->input_dev = NULL; + dev_alloc_err: + input_free_device(wm->input_dev); + alloc_err: + kfree(wm); + + return ret; +} + +static int wm97xx_remove(struct device *dev) +{ + struct wm97xx *wm = dev_get_drvdata(dev); + + platform_device_unregister(wm->battery_dev); + platform_device_unregister(wm->touch_dev); + input_unregister_device(wm->input_dev); + kfree(wm); + + return 0; +} + +#ifdef CONFIG_PM +static int wm97xx_suspend(struct device *dev, pm_message_t state) +{ + struct wm97xx *wm = dev_get_drvdata(dev); + u16 reg; + int suspend_mode; + + if (device_may_wakeup(&wm->input_dev->dev)) + suspend_mode = wm->suspend_mode; + else + suspend_mode = 0; + + if (wm->input_dev->users) + cancel_delayed_work_sync(&wm->ts_reader); + + /* Power down the digitiser (bypassing the cache for resume) */ + reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2); + reg &= ~WM97XX_PRP_DET_DIG; + if (wm->input_dev->users) + reg |= suspend_mode; + wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg); + + /* WM9713 has an additional power bit - turn it off if there + * are no users or if suspend mode is zero. */ + if (wm->id == WM9713_ID2 && + (!wm->input_dev->users || !suspend_mode)) { + reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000; + wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg); + } + + return 0; +} + +static int wm97xx_resume(struct device *dev) +{ + struct wm97xx *wm = dev_get_drvdata(dev); + + /* restore digitiser and gpios */ + if (wm->id == WM9713_ID2) { + wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]); + wm97xx_reg_write(wm, 0x5a, wm->misc); + if (wm->input_dev->users) { + u16 reg; + reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff; + wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg); + } + } + + wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]); + wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]); + + wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]); + wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]); + wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]); + wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]); + wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]); + wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]); + + if (wm->input_dev->users && !wm->pen_irq) { + wm->ts_reader_interval = wm->ts_reader_min_interval; + queue_delayed_work(wm->ts_workq, &wm->ts_reader, + wm->ts_reader_interval); + } + + return 0; +} + +#else +#define wm97xx_suspend NULL +#define wm97xx_resume NULL +#endif + +/* + * Machine specific operations + */ +int wm97xx_register_mach_ops(struct wm97xx *wm, + struct wm97xx_mach_ops *mach_ops) +{ + mutex_lock(&wm->codec_mutex); + if (wm->mach_ops) { + mutex_unlock(&wm->codec_mutex); + return -EINVAL; + } + wm->mach_ops = mach_ops; + mutex_unlock(&wm->codec_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops); + +void wm97xx_unregister_mach_ops(struct wm97xx *wm) +{ + mutex_lock(&wm->codec_mutex); + wm->mach_ops = NULL; + mutex_unlock(&wm->codec_mutex); +} +EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops); + +static struct device_driver wm97xx_driver = { + .name = "wm97xx-ts", + .bus = &ac97_bus_type, + .owner = THIS_MODULE, + .probe = wm97xx_probe, + .remove = wm97xx_remove, + .suspend = wm97xx_suspend, + .resume = wm97xx_resume, +}; + +static int __init wm97xx_init(void) +{ + return driver_register(&wm97xx_driver); +} + +static void __exit wm97xx_exit(void) +{ + driver_unregister(&wm97xx_driver); +} + +module_init(wm97xx_init); +module_exit(wm97xx_exit); + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>"); +MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver"); +MODULE_LICENSE("GPL"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/zylonite-wm97xx.c b/ANDROID_3.4.5/drivers/input/touchscreen/zylonite-wm97xx.c new file mode 100644 index 00000000..bf0869a7 --- /dev/null +++ b/ANDROID_3.4.5/drivers/input/touchscreen/zylonite-wm97xx.c @@ -0,0 +1,232 @@ +/* + * zylonite-wm97xx.c -- Zylonite Continuous Touch screen driver + * + * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Notes: + * This is a wm97xx extended touch driver supporting interrupt driven + * and continuous operation on Marvell Zylonite development systems + * (which have a WM9713 on board). + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/wm97xx.h> + +#include <mach/hardware.h> +#include <mach/mfp.h> +#include <mach/regs-ac97.h> + +struct continuous { + u16 id; /* codec id */ + u8 code; /* continuous code */ + u8 reads; /* number of coord reads per read cycle */ + u32 speed; /* number of coords per second */ +}; + +#define WM_READS(sp) ((sp / HZ) + 1) + +static const struct continuous cinfo[] = { + { WM9713_ID2, 0, WM_READS(94), 94 }, + { WM9713_ID2, 1, WM_READS(120), 120 }, + { WM9713_ID2, 2, WM_READS(154), 154 }, + { WM9713_ID2, 3, WM_READS(188), 188 }, +}; + +/* continuous speed index */ +static int sp_idx; + +/* + * Pen sampling frequency (Hz) in continuous mode. + */ +static int cont_rate = 200; +module_param(cont_rate, int, 0); +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); + +/* + * Pressure readback. + * + * Set to 1 to read back pen down pressure + */ +static int pressure; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); + +/* + * AC97 touch data slot. + * + * Touch screen readback data ac97 slot + */ +static int ac97_touch_slot = 5; +module_param(ac97_touch_slot, int, 0); +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); + + +/* flush AC97 slot 5 FIFO machines */ +static void wm97xx_acc_pen_up(struct wm97xx *wm) +{ + int i; + + msleep(1); + + for (i = 0; i < 16; i++) + MODR; +} + +static int wm97xx_acc_pen_down(struct wm97xx *wm) +{ + u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; + int reads = 0; + static u16 last, tries; + + /* When the AC97 queue has been drained we need to allow time + * to buffer up samples otherwise we end up spinning polling + * for samples. The controller can't have a suitably low + * threshold set to use the notifications it gives. + */ + msleep(1); + + if (tries > 5) { + tries = 0; + return RC_PENUP; + } + + x = MODR; + if (x == last) { + tries++; + return RC_AGAIN; + } + last = x; + do { + if (reads) + x = MODR; + y = MODR; + if (pressure) + p = MODR; + + dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n", + x, y, p); + + /* are samples valid */ + if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X || + (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y || + (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES) + goto up; + + /* coordinate is good */ + tries = 0; + input_report_abs(wm->input_dev, ABS_X, x & 0xfff); + input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); + input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); + input_sync(wm->input_dev); + reads++; + } while (reads < cinfo[sp_idx].reads); +up: + return RC_PENDOWN | RC_AGAIN; +} + +static int wm97xx_acc_startup(struct wm97xx *wm) +{ + int idx; + + /* check we have a codec */ + if (wm->ac97 == NULL) + return -ENODEV; + + /* Go you big red fire engine */ + for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { + if (wm->id != cinfo[idx].id) + continue; + sp_idx = idx; + if (cont_rate <= cinfo[idx].speed) + break; + } + wm->acc_rate = cinfo[sp_idx].code; + wm->acc_slot = ac97_touch_slot; + dev_info(wm->dev, + "zylonite accelerated touchscreen driver, %d samples/sec\n", + cinfo[sp_idx].speed); + + return 0; +} + +static void wm97xx_irq_enable(struct wm97xx *wm, int enable) +{ + if (enable) + enable_irq(wm->pen_irq); + else + disable_irq_nosync(wm->pen_irq); +} + +static struct wm97xx_mach_ops zylonite_mach_ops = { + .acc_enabled = 1, + .acc_pen_up = wm97xx_acc_pen_up, + .acc_pen_down = wm97xx_acc_pen_down, + .acc_startup = wm97xx_acc_startup, + .irq_enable = wm97xx_irq_enable, + .irq_gpio = WM97XX_GPIO_2, +}; + +static int zylonite_wm97xx_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + int gpio_touch_irq; + + if (cpu_is_pxa320()) + gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15); + else + gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26); + + wm->pen_irq = gpio_to_irq(gpio_touch_irq); + irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH); + + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_STICKY, + WM97XX_GPIO_WAKE); + wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_NOTSTICKY, + WM97XX_GPIO_NOWAKE); + + return wm97xx_register_mach_ops(wm, &zylonite_mach_ops); +} + +static int zylonite_wm97xx_remove(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + + wm97xx_unregister_mach_ops(wm); + + return 0; +} + +static struct platform_driver zylonite_wm97xx_driver = { + .probe = zylonite_wm97xx_probe, + .remove = zylonite_wm97xx_remove, + .driver = { + .name = "wm97xx-touch", + }, +}; +module_platform_driver(zylonite_wm97xx_driver); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite"); +MODULE_LICENSE("GPL"); |