1 files changed, 608 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/wacom_w8001.c b/ANDROID_3.4.5/drivers/input/touchscreen/wacom_w8001.c
new file mode 100644
index 00000000..1569a393
--- /dev/null
+++ b/ANDROID_3.4.5/drivers/input/touchscreen/wacom_w8001.c
@@ -0,0 +1,608 @@
+/*
+ * Wacom W8001 penabled serial touchscreen driver
+ *
+ * Copyright (c) 2008 Jaya Kumar
+ * Copyright (c) 2010 Red Hat, Inc.
+ * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout based on Elo serial touchscreen driver by Vojtech Pavlik
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input/mt.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+
+#define DRIVER_DESC	"Wacom W8001 serial touchscreen driver"
+
+MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define W8001_MAX_LENGTH	11
+#define W8001_LEAD_MASK		0x80
+#define W8001_LEAD_BYTE		0x80
+#define W8001_TAB_MASK		0x40
+#define W8001_TAB_BYTE		0x40
+/* set in first byte of touch data packets */
+#define W8001_TOUCH_MASK	(0x10 | W8001_LEAD_MASK)
+#define W8001_TOUCH_BYTE	(0x10 | W8001_LEAD_BYTE)
+
+#define W8001_QUERY_PACKET	0x20
+
+#define W8001_CMD_STOP		'0'
+#define W8001_CMD_START		'1'
+#define W8001_CMD_QUERY		'*'
+#define W8001_CMD_TOUCHQUERY	'%'
+
+/* length of data packets in bytes, depends on device. */
+#define W8001_PKTLEN_TOUCH93	5
+#define W8001_PKTLEN_TOUCH9A	7
+#define W8001_PKTLEN_TPCPEN	9
+#define W8001_PKTLEN_TPCCTL	11	/* control packet */
+#define W8001_PKTLEN_TOUCH2FG	13
+
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION    100
+#define W8001_TOUCH_RESOLUTION  10
+
+struct w8001_coord {
+	u8 rdy;
+	u8 tsw;
+	u8 f1;
+	u8 f2;
+	u16 x;
+	u16 y;
+	u16 pen_pressure;
+	u8 tilt_x;
+	u8 tilt_y;
+};
+
+/* touch query reply packet */
+struct w8001_touch_query {
+	u16 x;
+	u16 y;
+	u8 panel_res;
+	u8 capacity_res;
+	u8 sensor_id;
+};
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct w8001 {
+	struct input_dev *dev;
+	struct serio *serio;
+	struct completion cmd_done;
+	int id;
+	int idx;
+	unsigned char response_type;
+	unsigned char response[W8001_MAX_LENGTH];
+	unsigned char data[W8001_MAX_LENGTH];
+	char phys[32];
+	int type;
+	unsigned int pktlen;
+	u16 max_touch_x;
+	u16 max_touch_y;
+	u16 max_pen_x;
+	u16 max_pen_y;
+	char name[64];
+};
+
+static void parse_pen_data(u8 *data, struct w8001_coord *coord)
+{
+	memset(coord, 0, sizeof(*coord));
+
+	coord->rdy = data[0] & 0x20;
+	coord->tsw = data[0] & 0x01;
+	coord->f1 = data[0] & 0x02;
+	coord->f2 = data[0] & 0x04;
+
+	coord->x = (data[1] & 0x7F) << 9;
+	coord->x |= (data[2] & 0x7F) << 2;
+	coord->x |= (data[6] & 0x60) >> 5;
+
+	coord->y = (data[3] & 0x7F) << 9;
+	coord->y |= (data[4] & 0x7F) << 2;
+	coord->y |= (data[6] & 0x18) >> 3;
+
+	coord->pen_pressure = data[5] & 0x7F;
+	coord->pen_pressure |= (data[6] & 0x07) << 7 ;
+
+	coord->tilt_x = data[7] & 0x7F;
+	coord->tilt_y = data[8] & 0x7F;
+}
+
+static void parse_single_touch(u8 *data, struct w8001_coord *coord)
+{
+	coord->x = (data[1] << 7) | data[2];
+	coord->y = (data[3] << 7) | data[4];
+	coord->tsw = data[0] & 0x01;
+}
+
+static void scale_touch_coordinates(struct w8001 *w8001,
+				    unsigned int *x, unsigned int *y)
+{
+	if (w8001->max_pen_x && w8001->max_touch_x)
+		*x = *x * w8001->max_pen_x / w8001->max_touch_x;
+
+	if (w8001->max_pen_y && w8001->max_touch_y)
+		*y = *y * w8001->max_pen_y / w8001->max_touch_y;
+}
+
+static void parse_multi_touch(struct w8001 *w8001)
+{
+	struct input_dev *dev = w8001->dev;
+	unsigned char *data = w8001->data;
+	unsigned int x, y;
+	int i;
+	int count = 0;
+
+	for (i = 0; i < 2; i++) {
+		bool touch = data[0] & (1 << i);
+
+		input_mt_slot(dev, i);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
+		if (touch) {
+			x = (data[6 * i + 1] << 7) | data[6 * i + 2];
+			y = (data[6 * i + 3] << 7) | data[6 * i + 4];
+			/* data[5,6] and [11,12] is finger capacity */
+
+			/* scale to pen maximum */
+			scale_touch_coordinates(w8001, &x, &y);
+
+			input_report_abs(dev, ABS_MT_POSITION_X, x);
+			input_report_abs(dev, ABS_MT_POSITION_Y, y);
+			count++;
+		}
+	}
+
+	/* emulate single touch events when stylus is out of proximity.
+	 * This is to make single touch backward support consistent
+	 * across all Wacom single touch devices.
+	 */
+	if (w8001->type != BTN_TOOL_PEN &&
+			    w8001->type != BTN_TOOL_RUBBER) {
+		w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED;
+		input_mt_report_pointer_emulation(dev, true);
+	}
+
+	input_sync(dev);
+}
+
+static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
+{
+	memset(query, 0, sizeof(*query));
+
+	query->panel_res = data[1];
+	query->sensor_id = data[2] & 0x7;
+	query->capacity_res = data[7];
+
+	query->x = data[3] << 9;
+	query->x |= data[4] << 2;
+	query->x |= (data[2] >> 5) & 0x3;
+
+	query->y = data[5] << 9;
+	query->y |= data[6] << 2;
+	query->y |= (data[2] >> 3) & 0x3;
+
+	/* Early days' single-finger touch models need the following defaults */
+	if (!query->x && !query->y) {
+		query->x = 1024;
+		query->y = 1024;
+		if (query->panel_res)
+			query->x = query->y = (1 << query->panel_res);
+		query->panel_res = W8001_TOUCH_RESOLUTION;
+	}
+}
+
+static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
+{
+	struct input_dev *dev = w8001->dev;
+
+	/*
+	 * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
+	 * side2/eraser. If rdy && f2 are set, this can be either pen + side2,
+	 * or eraser. Assume:
+	 * - if dev is already in proximity and f2 is toggled → pen + side2
+	 * - if dev comes into proximity with f2 set → eraser
+	 * If f2 disappears after assuming eraser, fake proximity out for
+	 * eraser and in for pen.
+	 */
+
+	switch (w8001->type) {
+	case BTN_TOOL_RUBBER:
+		if (!coord->f2) {
+			input_report_abs(dev, ABS_PRESSURE, 0);
+			input_report_key(dev, BTN_TOUCH, 0);
+			input_report_key(dev, BTN_STYLUS, 0);
+			input_report_key(dev, BTN_STYLUS2, 0);
+			input_report_key(dev, BTN_TOOL_RUBBER, 0);
+			input_sync(dev);
+			w8001->type = BTN_TOOL_PEN;
+		}
+		break;
+
+	case BTN_TOOL_FINGER:
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_report_key(dev, BTN_TOOL_FINGER, 0);
+		input_sync(dev);
+		/* fall through */
+
+	case KEY_RESERVED:
+		w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		break;
+
+	default:
+		input_report_key(dev, BTN_STYLUS2, coord->f2);
+		break;
+	}
+
+	input_report_abs(dev, ABS_X, coord->x);
+	input_report_abs(dev, ABS_Y, coord->y);
+	input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure);
+	input_report_key(dev, BTN_TOUCH, coord->tsw);
+	input_report_key(dev, BTN_STYLUS, coord->f1);
+	input_report_key(dev, w8001->type, coord->rdy);
+	input_sync(dev);
+
+	if (!coord->rdy)
+		w8001->type = KEY_RESERVED;
+}
+
+static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
+{
+	struct input_dev *dev = w8001->dev;
+	unsigned int x = coord->x;
+	unsigned int y = coord->y;
+
+	/* scale to pen maximum */
+	scale_touch_coordinates(w8001, &x, &y);
+
+	input_report_abs(dev, ABS_X, x);
+	input_report_abs(dev, ABS_Y, y);
+	input_report_key(dev, BTN_TOUCH, coord->tsw);
+	input_report_key(dev, BTN_TOOL_FINGER, coord->tsw);
+
+	input_sync(dev);
+
+	w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED;
+}
+
+static irqreturn_t w8001_interrupt(struct serio *serio,
+				   unsigned char data, unsigned int flags)
+{
+	struct w8001 *w8001 = serio_get_drvdata(serio);
+	struct w8001_coord coord;
+	unsigned char tmp;
+
+	w8001->data[w8001->idx] = data;
+	switch (w8001->idx++) {
+	case 0:
+		if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) {
+			pr_debug("w8001: unsynchronized data: 0x%02x\n", data);
+			w8001->idx = 0;
+		}
+		break;
+
+	case W8001_PKTLEN_TOUCH93 - 1:
+	case W8001_PKTLEN_TOUCH9A - 1:
+		tmp = w8001->data[0] & W8001_TOUCH_BYTE;
+		if (tmp != W8001_TOUCH_BYTE)
+			break;
+
+		if (w8001->pktlen == w8001->idx) {
+			w8001->idx = 0;
+			if (w8001->type != BTN_TOOL_PEN &&
+			    w8001->type != BTN_TOOL_RUBBER) {
+				parse_single_touch(w8001->data, &coord);
+				report_single_touch(w8001, &coord);
+			}
+		}
+		break;
+
+	/* Pen coordinates packet */
+	case W8001_PKTLEN_TPCPEN - 1:
+		tmp = w8001->data[0] & W8001_TAB_MASK;
+		if (unlikely(tmp == W8001_TAB_BYTE))
+			break;
+
+		tmp = w8001->data[0] & W8001_TOUCH_BYTE;
+		if (tmp == W8001_TOUCH_BYTE)
+			break;
+
+		w8001->idx = 0;
+		parse_pen_data(w8001->data, &coord);
+		report_pen_events(w8001, &coord);
+		break;
+
+	/* control packet */
+	case W8001_PKTLEN_TPCCTL - 1:
+		tmp = w8001->data[0] & W8001_TOUCH_MASK;
+		if (tmp == W8001_TOUCH_BYTE)
+			break;
+
+		w8001->idx = 0;
+		memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH);
+		w8001->response_type = W8001_QUERY_PACKET;
+		complete(&w8001->cmd_done);
+		break;
+
+	/* 2 finger touch packet */
+	case W8001_PKTLEN_TOUCH2FG - 1:
+		w8001->idx = 0;
+		parse_multi_touch(w8001);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int w8001_command(struct w8001 *w8001, unsigned char command,
+			 bool wait_response)
+{
+	int rc;
+
+	w8001->response_type = 0;
+	init_completion(&w8001->cmd_done);
+
+	rc = serio_write(w8001->serio, command);
+	if (rc == 0 && wait_response) {
+
+		wait_for_completion_timeout(&w8001->cmd_done, HZ);
+		if (w8001->response_type != W8001_QUERY_PACKET)
+			rc = -EIO;
+	}
+
+	return rc;
+}
+
+static int w8001_open(struct input_dev *dev)
+{
+	struct w8001 *w8001 = input_get_drvdata(dev);
+
+	return w8001_command(w8001, W8001_CMD_START, false);
+}
+
+static void w8001_close(struct input_dev *dev)
+{
+	struct w8001 *w8001 = input_get_drvdata(dev);
+
+	w8001_command(w8001, W8001_CMD_STOP, false);
+}
+
+static int w8001_setup(struct w8001 *w8001)
+{
+	struct input_dev *dev = w8001->dev;
+	struct w8001_coord coord;
+	struct w8001_touch_query touch;
+	int error;
+
+	error = w8001_command(w8001, W8001_CMD_STOP, false);
+	if (error)
+		return error;
+
+	msleep(250);	/* wait 250ms before querying the device */
+
+	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+
+	__set_bit(INPUT_PROP_DIRECT, dev->propbit);
+
+	/* penabled? */
+	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	if (!error) {
+		__set_bit(BTN_TOUCH, dev->keybit);
+		__set_bit(BTN_TOOL_PEN, dev->keybit);
+		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
+		__set_bit(BTN_STYLUS, dev->keybit);
+		__set_bit(BTN_STYLUS2, dev->keybit);
+
+		parse_pen_data(w8001->response, &coord);
+		w8001->max_pen_x = coord.x;
+		w8001->max_pen_y = coord.y;
+
+		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+		input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+		input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
+		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+		if (coord.tilt_x && coord.tilt_y) {
+			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+		}
+		w8001->id = 0x90;
+		strlcat(w8001->name, " Penabled", sizeof(w8001->name));
+	}
+
+	/* Touch enabled? */
+	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
+
+	/*
+	 * Some non-touch devices may reply to the touch query. But their
+	 * second byte is empty, which indicates touch is not supported.
+	 */
+	if (!error && w8001->response[1]) {
+		__set_bit(BTN_TOUCH, dev->keybit);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
+
+		parse_touchquery(w8001->response, &touch);
+		w8001->max_touch_x = touch.x;
+		w8001->max_touch_y = touch.y;
+
+		if (w8001->max_pen_x && w8001->max_pen_y) {
+			/* if pen is supported scale to pen maximum */
+			touch.x = w8001->max_pen_x;
+			touch.y = w8001->max_pen_y;
+			touch.panel_res = W8001_PEN_RESOLUTION;
+		}
+
+		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+		input_abs_set_res(dev, ABS_X, touch.panel_res);
+		input_abs_set_res(dev, ABS_Y, touch.panel_res);
+
+		switch (touch.sensor_id) {
+		case 0:
+		case 2:
+			w8001->pktlen = W8001_PKTLEN_TOUCH93;
+			w8001->id = 0x93;
+			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+			break;
+
+		case 1:
+		case 3:
+		case 4:
+			w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+			w8001->id = 0x9a;
+			break;
+
+		case 5:
+			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
+
+			input_mt_init_slots(dev, 2);
+			input_set_abs_params(dev, ABS_MT_POSITION_X,
+						0, touch.x, 0, 0);
+			input_set_abs_params(dev, ABS_MT_POSITION_Y,
+						0, touch.y, 0, 0);
+			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
+						0, MT_TOOL_MAX, 0, 0);
+
+			strlcat(w8001->name, " 2FG", sizeof(w8001->name));
+			if (w8001->max_pen_x && w8001->max_pen_y)
+				w8001->id = 0xE3;
+			else
+				w8001->id = 0xE2;
+			break;
+		}
+	}
+
+	strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
+
+	return 0;
+}
+
+/*
+ * w8001_disconnect() is the opposite of w8001_connect()
+ */
+
+static void w8001_disconnect(struct serio *serio)
+{
+	struct w8001 *w8001 = serio_get_drvdata(serio);
+
+	serio_close(serio);
+
+	input_unregister_device(w8001->dev);
+	kfree(w8001);
+
+	serio_set_drvdata(serio, NULL);
+}
+
+/*
+ * w8001_connect() is the routine that is called when someone adds a
+ * new serio device that supports the w8001 protocol and registers it as
+ * an input device.
+ */
+
+static int w8001_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct w8001 *w8001;
+	struct input_dev *input_dev;
+	int err;
+
+	w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!w8001 || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	w8001->serio = serio;
+	w8001->dev = input_dev;
+	init_completion(&w8001->cmd_done);
+	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
+
+	serio_set_drvdata(serio, w8001);
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = w8001_setup(w8001);
+	if (err)
+		goto fail3;
+
+	input_dev->name = w8001->name;
+	input_dev->phys = w8001->phys;
+	input_dev->id.product = w8001->id;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = 0x056a;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->open = w8001_open;
+	input_dev->close = w8001_close;
+
+	input_set_drvdata(input_dev, w8001);
+
+	err = input_register_device(w8001->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+fail3:
+	serio_close(serio);
+fail2:
+	serio_set_drvdata(serio, NULL);
+fail1:
+	input_free_device(input_dev);
+	kfree(w8001);
+	return err;
+}
+
+static struct serio_device_id w8001_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_W8001,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, w8001_serio_ids);
+
+static struct serio_driver w8001_drv = {
+	.driver		= {
+		.name	= "w8001",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= w8001_serio_ids,
+	.interrupt	= w8001_interrupt,
+	.connect	= w8001_connect,
+	.disconnect	= w8001_disconnect,
+};
+
+static int __init w8001_init(void)
+{
+	return serio_register_driver(&w8001_drv);
+}
+
+static void __exit w8001_exit(void)
+{
+	serio_unregister_driver(&w8001_drv);
+}
+
+module_init(w8001_init);
+module_exit(w8001_exit);