summaryrefslogtreecommitdiff
path: root/usrp2/fpga/top
AgeCommit message (Collapse)Author
2009-10-11earliest beta files renamed to avoid confusionMatt Ettus
2009-10-01Fix warnings, mostly from implicitly defined wires or unspecified widthsMatt Ettus
2009-10-01fullchip sim now compiles again, after moving eth and models over to new ↵Matt Ettus
simple_gemac
2009-09-30Merge branch 'new_wb_intercon' into new_ethMatt Ettus
Functionality should not change at all Conflicts: usrp2/fpga/top/u2_core/u2_core.v
2009-09-30no idea where this came from, it shouldn't be hereMatt Ettus
2009-09-30Copied wb_1master back from quad radioMatt Ettus
more sane config options, should be exactly the same memory map
2009-09-20Merge branch 'serdes_newfifo' into new_ethMatt Ettus
2009-09-05fix a typo which caused tx glitchesMatt Ettus
2009-09-04Untested fixes for getting serdes onto the new fifo system. Compiles, at leastMatt Ettus
2009-09-04Implement Eth flow control using pause framesMatt Ettus
Not fully tested, but it seems to work without frame errors, sequence number errors or ethernet overruns. Still of course will get tx underruns on a slow machine, and the transmitted signal has some issues though.
2009-09-04parameterized fifo sizes, some reformattingMatt Ettus
2009-09-04debug the rx sideMatt Ettus
2009-09-03seems to build a decent fpga, but still some issues with a full connection.Matt Ettus
2009-09-03MAC transmit seems to work now. The root cause of the problem was ↵Matt Ettus
accidentally using the rx_clk in one stage of the fifos on the tx side.
2009-09-02debug pins, cleaned ignoresMatt Ettus
2009-08-31Merged SVN matt/new_eth r10782:11633 into new_ethJohnathan Corgan
* svn diff http://gnuradio.org/svn/branches/developers/matt/new_eth -r10782:11633 * Patch applied with no conflicts or fuzz.
2009-08-14Added git ignore files auto created from svn:ignore properties.git
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11592 221aa14e-8319-0410-a670-987f0aec2ac5
2009-07-30Add custom FPGA build.jcorgan
This is a custom build for USRP2 FPGA. It allows using a BasicRX or LFRX board and feed two independent, real signals. In addition, instead of the CIC/HB decimator, which optimizes frequency response, it uses an integrate and dump decimator, which optimizes for time-domain impulse response. These changes have been made in dsp_core_rx.v: * A second DDC has been added, sharing a frequency register with the existing DDC. * The output of the two DDCs are interleaved as I1 Q1 I2 Q2I ... into the receive FIFO. This limits the host configured decimation to 8 intead of 4. Use gr.deinterleave to recover the streams. * The ADCs are hardcoded: RX_A ==> DDC #1 I-input 0 ==> DDC #1 Q-input RX_B ==> DDC #2 I-input 0 ==> DDC #2 Q-input Thus, the input mux has been disabled. * The CIC/HB decimator has been replaced by an integrate and dump at the decimation rate. * To assist with meeting timing, the external RAM has been disabled. The basic application is to coherently sample two real IF streams and downconvert to baseband, while minimizing the impulse response duration of the resampling filters. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11519 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-27Fix swapped signals.jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10926 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-22Merged r10770:10887 from jcorgan/iad2 into trunk. Adds alternative USRP2 ↵jcorgan
FPGA build to use integrate-and-dump decimator instead of CIC/HB combination. This provides a much shorter time duration impulse response for the same decimation rate, at the expense of worse stop-band rejection. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10888 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-12mostly formatting and name changes. commented out special purpose pins.matt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10814 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-12from u2p2, autogeneratedmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10813 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-04Merged r10712:10765 from jcorgan/gpio into trunk. Adds out-of-band and ↵jcorgan
streaming GPIO functions for USRP2. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-02debug ports for fifo level testing. Normally I wouldn't check this in, but ↵matt
adding these ports actually improves timing. XST strikes again... git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10747 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-26remove support for unmodified dbsrx because there is way too much phase ↵matt
noise. only modified dbsrx are supported git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10521 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-24set all debug stuff to zeromatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10497 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-23support for unmodified dbsrx boardsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10482 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19new cordicmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10259 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-15pps sync works, meets timingmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10120 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-14synchronized pps, lots of debug pins changed, works, meets timingmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10118 221aa14e-8319-0410-a670-987f0aec2ac5
2008-11-09hardware control of ledsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9961 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-23u2_rev2 now works againmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9831 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-22make rev2 compile againmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9815 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-11New serdes status interrupt, clk_status interrupt. New capability to flush ↵matt
the ICache. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9779 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-08added the basic wb<-->extram interface and a serdes interrupt to tell link ↵matt
status git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9746 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-21catch up with latest pin defs of u2_corematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9636 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-17allow fpga to take over sd card interface from cpldmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9591 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-11Merged r9505:9553 from old usrp2/trunk into trunk/usrp2jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9555 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-08Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and ↵jcorgan
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-22 17:32:25 +0000