diff options
Diffstat (limited to '3776/CH11/EX11.7')
| -rw-r--r-- | 3776/CH11/EX11.7/Ex11_7.sce | 21 |
1 files changed, 12 insertions, 9 deletions
diff --git a/3776/CH11/EX11.7/Ex11_7.sce b/3776/CH11/EX11.7/Ex11_7.sce index a265e2104..f933f32cd 100644 --- a/3776/CH11/EX11.7/Ex11_7.sce +++ b/3776/CH11/EX11.7/Ex11_7.sce @@ -1,20 +1,23 @@ clear //Given // -L = 15 //ft - The length of the each rod -p = 200 //kips The concentric load applied +L = 15 //ft - The length of the each rod +p = 200 //kips The concentric load applied r_min = 2.10 //in - The radius of gyration stress_yp = 50 //ksi - the yielding point stress E = 29*(10**3) //ksi - The youngs modulus C_c = ((2*(%pi**2)*E/stress_yp)**0.5) //Slenderness ratio L/R C_s = L*12/r_min //Slenderness ratio L/R present situation +printf("\n C_s = %0.2f ",C_s) +printf("\n C_c = %0.2f ",C_c) + if C_s <C_c then - printf("a)The following approch is solvable") + printf ("\nSince calculated C_s is less than Cc, we can apply the second ASD formula.") else - printf("The caliculation is not possible") + printf("The calculation is not possible") end -F_S = 5.0/3 +3*C_s/(8*C_c) -(3*C_s**3)/(8*C_c**3) //Safety factor -Stress_all = (1 - (C_s**2)/(2*C_c**2))*stress_yp/F_S //The allowable strees -a = p/Stress_all //in2 the alloawble area of the beam -printf("\n The allowable stress in this case is %0.2f kips",Stress_all) -printf("\n This stress requires %0.2f in2",a) +F_S = 5.0/3 +3*C_s/(8*C_c) -(C_s**3)/(8*C_c**3) //Safety factor +Stress_all = (1 - (C_s**2)/(2*C_c**2))*stress_yp/F_S //The allowable stress +a = p/Stress_all //sq.in the allowable area of the beam +printf("\n The allowable stress in this case is %0.0f kips",Stress_all) +printf("\n This stress requires %0.2f sq.in",a) |