1 files changed, 44 insertions, 0 deletions
diff --git a/3472/CH10/EX10.10/Example10_10.sce b/3472/CH10/EX10.10/Example10_10.sce
new file mode 100644
index 000000000..fce81b1c6
--- /dev/null
+++ b/3472/CH10/EX10.10/Example10_10.sce
@@ -0,0 +1,44 @@
+// A Texbook on POWER SYSTEM ENGINEERING
+// A.Chakrabarti, M.L.Soni, P.V.Gupta, U.S.Bhatnagar
+// DHANPAT RAI & Co.
+// SECOND EDITION 
+
+// PART II : TRANSMISSION AND DISTRIBUTION
+// CHAPTER 3: STEADY STATE CHARACTERISTICS AND PERFORMANCE OF TRANSMISSION LINES
+
+// EXAMPLE : 3.10 :
+// Page number 135
+clear ; clc ; close ; // Clear the work space and console
+
+// Given data
+f = 50.0                      // Frequency(Hz)
+l = 125.0                     // Line length(km)
+P_r = 40.0*10**6              // Load at receiving end(VA)
+V_r = 110.0*10**3             // Line voltage at receiving end(V)
+PF_r = 0.8                    // Lagging load power factor
+R = 11.0                      // Resistance(ohm/phase)
+X = 38.0                      // Inductive reactance(ohm/phase)
+Y = 3.0*10**-4                // Capacitive susceptance(S)
+
+// Calculations
+// Case(i)
+E_r = V_r/3**0.5                                        // Receiving end phase voltage(V)
+Z = complex(R,X)                                        // Total impedance(ohm/phase)
+I_c1 = E_r*(Y/2)*exp(%i*90.0*%pi/180)                   // Current through shunt admittance at receiving end(A)
+I_r = P_r/(3**0.5*V_r)*exp(%i*-acos(PF_r))              // Load current(A)
+I = I_r+I_c1                                            // Current through series impedance(A)
+E_s = I*Z+E_r                                           // Voltage across shunt admittance at sending end(V)
+E_s_ll = 3**0.5*E_s/1000.0                              // Line to line voltage at sending end(kV)
+I_c2 = E_s*(Y/2)*exp(%i*90.0*%pi/180)                   // Current through shunt admittance at sending end(A)
+// Case(ii)
+I_s = I_c2+I_r                                          // Sending end current(A)
+angle_Er_Es = phasemag(E_s)                             // Angle between E_r and E_s(°)
+angle_Er_Is = phasemag(I_s)                             // Angle between E_r and I_s(°)
+angle_Es_Is = angle_Er_Es-angle_Er_Is                   // Angle between E_s and I_s(°)
+PF_s = cosd(angle_Es_Is)                                // Sending end power factor
+
+// Results
+disp("PART II - EXAMPLE : 3.10 : SOLUTION :-")
+printf("\nCase(i) : Line to line voltage at sending end, E_s = %.f kV", abs(E_s_ll))
+printf("\nCase(ii): Sending end power factor = %.3f \n", PF_s)
+printf("\nNOTE: Answers in the textbook are incomplete")