2 files changed, 33 insertions, 0 deletions
diff --git a/1418/CH26/EX26.18/EX26_18.jpg b/1418/CH26/EX26.18/EX26_18.jpg
new file mode 100644
index 000000000..5cbbe6c89
--- /dev/null
+++ b/1418/CH26/EX26.18/EX26_18.jpg
diff --git a/1418/CH26/EX26.18/EX26_18.sce b/1418/CH26/EX26.18/EX26_18.sce
new file mode 100644
index 000000000..a9236207d
--- /dev/null
+++ b/1418/CH26/EX26.18/EX26_18.sce
@@ -0,0 +1,33 @@
+//EXAMPLE 26.18
+//4-POLE LONG SUNT GENERATOR
+
+clc;
+funcprot(0);
+
+//Variable Initialisation
+N=900;.................//Speed of  the generator in rpm
+P=4;....................//Number of poles
+Rse=0.02;.............//Series field resistance in Ohms
+Rsh=100;...............//Shunt field resistance in Ohms
+Phi=0.07;..........//Air gap flux per pole in Webers
+Al=P;...............//Number of parallel paths in lap wound generator
+T=220;.............//Number of turns in armature winding
+Rw=0.004;..........//Resistance per turn in Ohms
+Ia=50;.............//Armature current in Amperes
+
+Z=T*2;....................//Total number of conductors
+E=(Phi*P*N*Z)/(60*Al);.............//Generated EMF in Volts
+disp(E,"Generated EMF in Volts:");
+Rtc=T*Rw;.....................//Total resistance of 220 turns in Ohms
+Rp=Rtc/Al;...................//Resistance of each path in Ohms
+Ra=Rp/Al;...................//Armature resistance in Ohms
+Rca=Ra+Rse;..................//Armature circuit resistance in Ohms
+Va=Ia*Rca;...................//Armature circuit drop in Volts
+V=E-Va;.......................//Terminal voltage in Volts
+disp(V,"Terminal voltage in Volts:");
+Ish=V/Rsh;....................//Current through in shunt field in Amperes
+y=round(Ish*100)/100;.............//Rounding of decimal places
+I=Ia-y;..........................//Load current in Amperes
+Po=V*I;................//Output power in Kilo Watts
+y1=round(Po);
+disp(y1,"Output power in Kilo Watts:");