diff options
Diffstat (limited to 'include/configs/VoVPN-GW.h')
| -rwxr-xr-x | include/configs/VoVPN-GW.h | 406 |
1 files changed, 406 insertions, 0 deletions
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h new file mode 100755 index 0000000..92bade5 --- /dev/null +++ b/include/configs/VoVPN-GW.h @@ -0,0 +1,406 @@ +/* + * (C) Copyright 2004 + * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) + * + * Support for the Elmeg VoVPN Gateway Module + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* define cpu used */ +#define CONFIG_MPC8272 1 + +/* define busmode: 8260 */ +#undef CONFIG_BUSMODE_60x + +/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ +#ifdef CONFIG_CLKIN_66MHz +#define CONFIG_8260_CLKIN 66666666 /* in Hz */ +#else +#define CONFIG_8260_CLKIN 100000000 /* in Hz */ +#endif + +/* call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_F 1 + +/* have misc_init_r() function */ +#define CONFIG_MISC_INIT_R 1 + +/* have reset_phy_r() function */ +#define CONFIG_RESET_PHY_R 1 + +/* have special reset function */ +#define CONFIG_HAVE_OWN_RESET 1 + +/* allow serial and ethaddr to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +/* watchdog disabled */ +#undef CONFIG_WATCHDOG + +/* include support for bzip2 compressed images */ +#undef CONFIG_BZIP2 + +/* status led */ +#undef CONFIG_STATUS_LED /* XXX jse */ + +/* vendor parameter protection */ +#define CONFIG_ENV_OVERWRITE + +/* + * select serial console configuration + * + * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + */ +#define CONFIG_CONS_ON_SMC +#undef CONFIG_CONS_ON_SCC +#undef CONFIG_CONS_NONE +#define CONFIG_CONS_INDEX 1 + +/* serial port default baudrate */ +#define CONFIG_BAUDRATE 115200 + +/* echo on for serial download */ +#define CONFIG_LOADS_ECHO 1 + +/* don't allow baudrate change */ +#undef CFG_LOADS_BAUD_CHANGE + +/* supported baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * select ethernet configuration + * + * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then + * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 + * for FCC) + * + * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be + * defined elsewhere (as for the console), or CFG_CMD_NET must be removed + * from CONFIG_COMMANDS to remove support for networking. + */ +#undef CONFIG_ETHER_ON_SCC +#define CONFIG_ETHER_ON_FCC +#undef CONFIG_ETHER_NONE + +#ifdef CONFIG_ETHER_ON_FCC + +/* which SCC/FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 1 + +/* Marvell Switch SMI base addr */ +#define CFG_PHY_ADDR 0x10 + +/* FCC1 RMII REFCLK is CLK10 */ +#define CFG_CMXFCR_VALUE CMXFCR_TF1CS_CLK10 +#define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_TF1CS_MSK) + +/* BDs and buffers on 60x bus */ +#define CFG_CPMFCR_RAMTYPE 0 + +/* Local Protect, Full duplex, Flowcontrol, RMII */ +#define CFG_FCC_PSMR (FCC_PSMR_LPB|FCC_PSMR_FDE|\ + FCC_PSMR_FCE|FCC_PSMR_RMII) + +/* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII + +#define MDIO_PORT 1 /* Port B */ +#define CFG_MDIO_PIN 0x00002000 /* PB18 */ +#define CFG_MDC_PIN 0x00001000 /* PB19 */ +#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN) +#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN) +#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0) +#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \ + else iop->pdat &= ~CFG_MDIO_PIN +#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \ + else iop->pdat &= ~CFG_MDC_PIN +#define MIIDELAY udelay(1) + +#endif + +/* configure commands */ +#define CONFIG_COMMANDS ( CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_BDI | \ + CFG_CMD_CONSOLE | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IMLS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * boot options & environment + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "run flash_self" +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ +"clean_nv=erase fff20000 ffffffff\0" \ +"update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 ${filesize}; tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 ${filesize}\0" \ +"update_lx=tftp 100000 ${kernel}; erase ${kernel_addr} ffefffff; cp.b 100000 ${kernel_addr} ${filesize}\0" \ +"update_fs=tftp 100000 ${fs}.${fstype}; erase ff840000 ffdfffff; cp.b 100000 ff840000 ${filesize}\0" \ +"update_ub=tftp 100000 ${uboot}; protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 ${filesize}; protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \ +"flashargs=setenv bootargs root=${rootdev} rw rootfstype=${fstype}\0" \ +"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ +"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \ +"addmisc=setenv bootargs ${bootargs} console=${console},${baudrate} ethaddr=${ethaddr} panic=1\0" \ +"net_nfs=tftpboot 400000 ${kernel}; run nfsargs addip addmisc; bootm\0" \ +"net_self=tftpboot 400000 ${kernel}; run flashargs addmisc; bootm\0" \ +"flash_self=run flashargs addmisc; bootm ${kernel_addr}\0" \ +"flash_nfs=run nfsargs addip addmisc; bootm ${kernel_addr}\0" \ +"fstype=cramfs\0" \ +"rootpath=/root_fs\0" \ +"uboot=PPC/u-boot.bin\0" \ +"kernel=PPC/uImage\0" \ +"kernel_addr=ffe00000\0" \ +"fs=PPC/root_fs\0" \ +"console=ttyS0\0" \ +"netdev=eth0\0" \ +"rootdev=31:3\0" \ +"ethaddr=00:09:4f:01:02:03\0" \ +"ipaddr=10.0.0.201\0" \ +"netmask=255.255.255.0\0" \ +"serverip=10.0.0.136\0" \ +"gatewayip=10.0.0.10\0" \ +"hostname=bastard\0" \ +"" + + +/* + * miscellaneous configurable options + */ + +/* undef to save memory */ +#define CFG_LONGHELP + +/* monitor command prompt */ +#define CFG_PROMPT "=> " + +/* console i/o buffer size */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 +#else +#define CFG_CBSIZE 256 +#endif + +/* print buffer size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) + +/* max number of command args */ +#define CFG_MAXARGS 16 + +/* boot argument buffer size */ +#define CFG_BARGSIZE CFG_CBSIZE + +/* memtest works on */ +#define CFG_MEMTEST_START 0x00100000 +/* 1 ... 15 MB in DRAM */ +#define CFG_MEMTEST_END 0x00f00000 +/* full featured memtest */ +#define CFG_ALT_MEMTEST + +/* default load address */ +#define CFG_LOAD_ADDR 0x00100000 + +/* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 + +/* configure flash */ +#define CFG_FLASH_BASE 0xff800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 64 +#define CFG_FLASH_SIZE 8 +#undef CFG_FLASH_16BIT +#define CFG_FLASH_ERASE_TOUT 240000 +#define CFG_FLASH_WRITE_TOUT 500 +#define CFG_FLASH_LOCK_TOUT 500 +#define CFG_FLASH_UNLOCK_TOUT 10000 +#define CFG_FLASH_PROTECTION + +/* monitor in flash */ +#define CFG_MONITOR_OFFSET 0x00700000 + +/* environment in flash */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00020000) +#define CFG_ENV_SIZE 0x00020000 +#define CFG_ENV_SECT_SIZE 0x00020000 + +/* + * Initial memory map for linux + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) + +/* hard reset configuration words */ +#ifdef CONFIG_CLKIN_66MHz +#define CFG_HRCW_MASTER 0x04643050 +#else +#error NO HRCW FOR 100MHZ SPECIFIED !!! +#endif +#define CFG_HRCW_SLAVE1 0x00000000 +#define CFG_HRCW_SLAVE2 0x00000000 +#define CFG_HRCW_SLAVE3 0x00000000 +#define CFG_HRCW_SLAVE4 0x00000000 +#define CFG_HRCW_SLAVE5 0x00000000 +#define CFG_HRCW_SLAVE6 0x00000000 +#define CFG_HRCW_SLAVE7 0x00000000 + +/* internal memory mapped register */ +#define CFG_IMMR 0xF0000000 + +/* definitions for initial stack pointer and data area (in DPRAM) */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE (32*1024*1024) +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_FLASH (CFG_FLASH_BASE + CFG_MONITOR_OFFSET) +#define CFG_MONITOR_LEN 0x00020000 +#define CFG_MALLOC_LEN 0x00020000 + +/* boot flags */ +#define BOOTFLAG_COLD 0x01 /* normal power-on */ +#define BOOTFLAG_WARM 0x02 /* software reboot */ + +/* cache configuration */ +#define CFG_CACHELINE_SIZE 32 /* for MPC8260 */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of above */ +#endif + +/* + * HIDx - Hardware Implementation-dependent Registers + *----------------------------------------------------------------------- + * HID0 also contains cache control - initially enable both caches and + * invalidate contents, then the final state leaves only the instruction + * cache enabled. Note that Power-On and Hard reset invalidate the caches, + * but Soft reset does not. + * + * HID1 has only read-only information - nothing to set. + */ +#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|\ + HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE) +#define CFG_HID0_FINAL (HID0_IFEM|HID0_ABE) +#define CFG_HID2 0 + +/* RMR - reset mode register - turn on checkstop reset enable */ +#define CFG_RMR RMR_CSRE + +/* BCR - bus configuration */ +#define CFG_BCR 0x00000000 + +/* SIUMCR - siu module configuration */ +#define CFG_SIUMCR 0x4905c000 + +/* SYPCR - system protection control */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR 0xffffff87 +#else +#define CFG_SYPCR 0xffffff83 +#endif + +/* TMCNTSC - time counter status and control */ +/* clear interrupts XXX jse */ +/*#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR) */ +#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|\ + TMCNTSC_TCF|TMCNTSC_TCE) + +/* PISCR - periodic interrupt status and control */ +/* clear interrupts XXX jse */ +/*#define CFG_PISCR (PISCR_PS) */ +#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) + +/* SCCR - system clock control */ +#define CFG_SCCR 0x000001a9 + +/* RCCR - risc controller configuration */ +#define CFG_RCCR 0 + +/* + * MEMORY MAP + * ---------- + * CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored) + * CS1 - SDRAM 32MB/64Bit base=0x00000000 + * CS2 - DSP/SL1 1MB/16Bit base=0xf0100000 + * CS3 - DSP/SL2 1MB/16Bit base=0xf0200000 + * CS4 - DSP/SL3 1MB/16Bit base=0xf0300000 + * CS5 - DSP/SL4 1MB/16Bit base=0xf0400000 + * CS7 - DPRAM 1KB/8Bit base=0xf0500000, size=32KB (32x mirrored) + * x - IMMR 384KB base=0xf0000000 + */ +/* XXX jse 100MHz TODO */ +#define CFG_BR0_PRELIM 0xff800801 +#define CFG_OR0_PRELIM 0xff801e44 +#define CFG_BR1_PRELIM 0x00000041 +#define CFG_OR1_PRELIM 0xfe002ec0 +#if 1 +#define CFG_BR2_PRELIM 0xf0101001 +#define CFG_OR2_PRELIM 0xfff00ef4 +#define CFG_BR3_PRELIM 0xf0201001 +#define CFG_OR3_PRELIM 0xfff00ef4 +#define CFG_BR4_PRELIM 0xf0301001 +#define CFG_OR4_PRELIM 0xfff00ef4 +#define CFG_BR5_PRELIM 0xf0401001 +#define CFG_OR5_PRELIM 0xfff00ef4 +#else +#define CFG_BR2_PRELIM 0xf0101081 +#define CFG_OR2_PRELIM 0xfff00104 +#define CFG_BR3_PRELIM 0xf0201081 +#define CFG_OR3_PRELIM 0xfff00104 +#define CFG_BR4_PRELIM 0xf0301081 +#define CFG_OR4_PRELIM 0xfff00104 +#define CFG_BR5_PRELIM 0xf0401081 +#define CFG_OR5_PRELIM 0xfff00104 +#endif +#define CFG_BR7_PRELIM 0xf0500881 +#define CFG_OR7_PRELIM 0xffff8104 +#define CFG_MPTPR 0x2700 +#define CFG_PSDMR 0x822a2452 /* optimal */ +/*#define CFG_PSDMR 0x822a48a3 */ /* relaxed */ +#define CFG_PSRT 0x1a + +/* "bad" address */ +#define CFG_RESET_ADDRESS 0x40000000 + +#endif /* __CONFIG_H */ |