diff options
author | Kevin | 2014-11-15 11:48:36 +0800 |
---|---|---|
committer | Kevin | 2014-11-15 11:48:36 +0800 |
commit | d04075478d378d9e15f3e1abfd14b0bd124077d4 (patch) | |
tree | 733dd964582f388b9e3e367c249946cd32a2851f /board/rpxsuper | |
download | FOSSEE-netbook-uboot-source-d04075478d378d9e15f3e1abfd14b0bd124077d4.tar.gz FOSSEE-netbook-uboot-source-d04075478d378d9e15f3e1abfd14b0bd124077d4.tar.bz2 FOSSEE-netbook-uboot-source-d04075478d378d9e15f3e1abfd14b0bd124077d4.zip |
init commit via android 4.4 uboot
Diffstat (limited to 'board/rpxsuper')
-rwxr-xr-x | board/rpxsuper/Makefile | 46 | ||||
-rwxr-xr-x | board/rpxsuper/config.mk | 34 | ||||
-rwxr-xr-x | board/rpxsuper/flash.c | 434 | ||||
-rwxr-xr-x | board/rpxsuper/mii_phy.c | 107 | ||||
-rwxr-xr-x | board/rpxsuper/readme | 30 | ||||
-rwxr-xr-x | board/rpxsuper/rpxsuper.c | 305 | ||||
-rwxr-xr-x | board/rpxsuper/rpxsuper.h | 25 | ||||
-rwxr-xr-x | board/rpxsuper/u-boot.lds | 125 |
8 files changed, 1106 insertions, 0 deletions
diff --git a/board/rpxsuper/Makefile b/board/rpxsuper/Makefile new file mode 100755 index 0000000..4535106 --- /dev/null +++ b/board/rpxsuper/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := rpxsuper.o flash.o mii_phy.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/rpxsuper/config.mk b/board/rpxsuper/config.mk new file mode 100755 index 0000000..4b8c5d3 --- /dev/null +++ b/board/rpxsuper/config.mk @@ -0,0 +1,34 @@ +# +# (C) Copyright 2000 +# Sysgo Real-Time Solutions, GmbH <www.elinos.com> +# Marius Groeger <mgroeger@sysgo.de> +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MBX8xx boards +# + +TEXT_BASE = 0x80F00000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/rpxsuper/flash.c b/board/rpxsuper/flash.c new file mode 100755 index 0000000..d80e778 --- /dev/null +++ b/board/rpxsuper/flash.c @@ -0,0 +1,434 @@ +/* + * (C) Copyright 2000 + * Marius Groeger <mgroeger@sysgo.de> + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Flash Routines for AMD 29F080B devices + * Added support for 64bit and AMD 29DL323B + * + *-------------------------------------------------------------------- + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8xx.h> +#include <asm/io.h> + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +#define RD_SWP32(x) in_le32((volatile u32*)x) + +/*----------------------------------------------------------------------- + * Functions + */ + +static ulong flash_get_size (vu_long *addr, flash_info_t *info); +static int write_word (flash_info_t *info, ulong dest, ulong data); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + unsigned long size; + int i; + + /* Init: no FLASHes known */ + for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* for now, only support the 4 MB Flash SIMM */ + size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]); + + /* + * protect monitor and environment sectors + */ + +#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE+monitor_flash_len-1, + &flash_info[0]); +#endif + +#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR) +# ifndef CFG_ENV_SIZE +# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +# endif + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); +#endif + + return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024); +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case (AMD_MANUFACT & FLASH_VENDMASK): + printf ("AMD "); + break; + case (FUJ_MANUFACT & FLASH_VENDMASK): + printf ("FUJITSU "); + break; + case (SST_MANUFACT & FLASH_VENDMASK): + printf ("SST "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_DL323B & FLASH_TYPEMASK): + printf("AM29DL323B (32 MBit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ + +static ulong flash_get_size (vu_long *addr, flash_info_t *info) +{ + short i; + vu_long vendor[2], devid[2]; + ulong base = (ulong)addr; + + /* Reset and Write auto select command: read Manufacturer ID */ + addr[0] = 0xf0f0f0f0; + addr[2 * 0x0555] = 0xAAAAAAAA; + addr[2 * 0x02AA] = 0x55555555; + addr[2 * 0x0555] = 0x90909090; + addr[1] = 0xf0f0f0f0; + addr[2 * 0x0555 + 1] = 0xAAAAAAAA; + addr[2 * 0x02AA + 1] = 0x55555555; + addr[2 * 0x0555 + 1] = 0x90909090; + udelay (1000); + + vendor[0] = RD_SWP32(&addr[0]); + vendor[1] = RD_SWP32(&addr[1]); + if (vendor[0] != vendor[1] || vendor[0] != AMD_MANUFACT) { + info->size = 0; + goto out; + } + + devid[0] = RD_SWP32(&addr[2]); + devid[1] = RD_SWP32(&addr[3]); + + if (devid[0] == AMD_ID_DL323B) { + /* + * we have 2 Banks + * Bank 1 (23 Sectors): 0-7=8kbyte, 8-22=64kbyte + * Bank 2 (48 Sectors): 23-70=64kbyte + */ + info->flash_id = (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_DL323B & FLASH_TYPEMASK); + info->sector_count = 71; + info->size = 4 * (8 * 8 + 63 * 64) * 1024; + } + else { + info->size = 0; + goto out; + } + + /* set up sector start address table */ + for (i = 0; i < 8; i++) { + info->start[i] = base + (i * 0x8000); + } + for (i = 8; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x40000) + 8 * 0x8000 - 8 * 0x40000; + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address */ + addr = (volatile unsigned long *)(info->start[i]); + addr[2 * 0x0555] = 0xAAAAAAAA; + addr[2 * 0x02AA] = 0x55555555; + addr[2 * 0x0555] = 0x90909090; + addr[2 * 0x0555 + 1] = 0xAAAAAAAA; + addr[2 * 0x02AA + 1] = 0x55555555; + addr[2 * 0x0555 + 1] = 0x90909090; + udelay (1000); + base = RD_SWP32(&addr[4]); + base |= RD_SWP32(&addr[5]); + info->protect[i] = base & 0x00010001 ? 1 : 0; + } + addr = (vu_long*)info->start[0]; + +out: + /* reset command */ + addr[0] = 0xf0f0f0f0; + addr[1] = 0xf0f0f0f0; + + return info->size; +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + vu_long *addr = (vu_long*)(info->start[0]); + int flag, prot, sect, l_sect; + ulong start, now, last; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr[2 * 0x0555] = 0xAAAAAAAA; + addr[2 * 0x02AA] = 0x55555555; + addr[2 * 0x0555] = 0x80808080; + addr[2 * 0x0555] = 0xAAAAAAAA; + addr[2 * 0x02AA] = 0x55555555; + addr[2 * 0x0555 + 1] = 0xAAAAAAAA; + addr[2 * 0x02AA + 1] = 0x55555555; + addr[2 * 0x0555 + 1] = 0x80808080; + addr[2 * 0x0555 + 1] = 0xAAAAAAAA; + addr[2 * 0x02AA + 1] = 0x55555555; + udelay (100); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (vu_long*)(info->start[sect]); + addr[0] = 0x30303030; + addr[1] = 0x30303030; + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = (vu_long*)(info->start[l_sect]); + while ( (addr[0] & 0x80808080) != 0x80808080 || + (addr[1] & 0x80808080) != 0x80808080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } + } + + DONE: + /* reset to read mode */ + addr = (volatile unsigned long *)info->start[0]; + addr[0] = 0xF0F0F0F0; /* reset bank */ + addr[1] = 0xF0F0F0F0; /* reset bank */ + + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i<l; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + for (; i<4 && cnt>0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t *info, ulong dest, ulong data) +{ + vu_long *addr = (vu_long*)(info->start[0]); + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + if ((dest & 0x00000004) == 0) { + addr[2 * 0x0555] = 0xAAAAAAAA; + addr[2 * 0x02AA] = 0x55555555; + addr[2 * 0x0555] = 0xA0A0A0A0; + } + else { + addr[2 * 0x0555 + 1] = 0xAAAAAAAA; + addr[2 * 0x02AA + 1] = 0x55555555; + addr[2 * 0x0555 + 1] = 0xA0A0A0A0; + } + + *((vu_long *)dest) = data; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + return (0); +} + +/*----------------------------------------------------------------------- + */ diff --git a/board/rpxsuper/mii_phy.c b/board/rpxsuper/mii_phy.c new file mode 100755 index 0000000..ef99aff --- /dev/null +++ b/board/rpxsuper/mii_phy.c @@ -0,0 +1,107 @@ +#include <common.h> +#include <mii_phy.h> +#include "rpxsuper.h" + +#define MII_MDIO 0x01 +#define MII_MDCK 0x02 +#define MII_MDIR 0x04 + +void +mii_discover_phy(void) +{ + int known; + unsigned short phy_reg; + unsigned long phy_id; + + known = 0; + printf("Discovering phy @ 0: "); + phy_id = mii_phy_read(2) << 16; + phy_id |= mii_phy_read(3); + if ((phy_id & 0xFFFFFC00) == 0x00137800) { + printf("Level One "); + if ((phy_id & 0x000003F0) == 0xE0) { + printf("LXT971A Revision %d\n", (int)(phy_id & 0xF)); + known = 1; + } + else printf("unknown type\n"); + } + else printf("unknown OUI = 0x%08lX\n", phy_id); + + phy_reg = mii_phy_read(1); + if (!(phy_reg & 0x0004)) printf("Link is down\n"); + if (!(phy_reg & 0x0020)) printf("Auto-negotiation not complete\n"); + if (phy_reg & 0x0002) printf("Jabber condition detected\n"); + if (phy_reg & 0x0010) printf("Remote fault condition detected \n"); + + if (known) { + phy_reg = mii_phy_read(17); + if (phy_reg & 0x0400) + printf("Phy operating at %d MBit/s in %s-duplex mode\n", + phy_reg & 0x4000 ? 100 : 10, + phy_reg & 0x0200 ? "full" : "half"); + else + printf("bad link!!\n"); +/* +left off: no link, green 100MBit, yellow 10MBit +right off: no activity, green full-duplex, yellow half-duplex +*/ + mii_phy_write(20, 0x0452); + } +} + +unsigned short +mii_phy_read(unsigned short reg) +{ + int i; + unsigned short tmp, val = 0, adr = 0; + t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE; + + tmp = 0x6002 | (adr << 7) | (reg << 2); + regs->bcsr4 = 0xC3; + for (i = 0; i < 64; i++) { + regs->bcsr4 ^= MII_MDCK; + } + for (i = 0; i < 16; i++) { + regs->bcsr4 &= ~MII_MDCK; + if (tmp & 0x8000) regs->bcsr4 |= MII_MDIO; + else regs->bcsr4 &= ~MII_MDIO; + regs->bcsr4 |= MII_MDCK; + tmp <<= 1; + } + regs->bcsr4 |= MII_MDIR; + for (i = 0; i < 16; i++) { + val <<= 1; + regs->bcsr4 = MII_MDIO | (regs->bcsr4 | MII_MDCK); + if (regs->bcsr4 & MII_MDIO) val |= 1; + regs->bcsr4 = MII_MDIO | (regs->bcsr4 &= ~MII_MDCK); + } + return val; +} + +void +mii_phy_write(unsigned short reg, unsigned short val) +{ + int i; + unsigned short tmp, adr = 0; + t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE; + + tmp = 0x5002 | (adr << 7) | (reg << 2); + regs->bcsr4 = 0xC3; + for (i = 0; i < 64; i++) { + regs->bcsr4 ^= MII_MDCK; + } + for (i = 0; i < 16; i++) { + regs->bcsr4 &= ~MII_MDCK; + if (tmp & 0x8000) regs->bcsr4 |= MII_MDIO; + else regs->bcsr4 &= ~MII_MDIO; + regs->bcsr4 |= MII_MDCK; + tmp <<= 1; + } + for (i = 0; i < 16; i++) { + regs->bcsr4 &= ~MII_MDCK; + if (val & 0x8000) regs->bcsr4 |= MII_MDIO; + else regs->bcsr4 &= ~MII_MDIO; + regs->bcsr4 |= MII_MDCK; + val <<= 1; + } +} diff --git a/board/rpxsuper/readme b/board/rpxsuper/readme new file mode 100755 index 0000000..21267bd --- /dev/null +++ b/board/rpxsuper/readme @@ -0,0 +1,30 @@ +Hi, + +so this is the port to the Embedded Planet RPX Super Board. + +ATTENTION +This code is only tested on the AY-Version, which is an early release with some +hardware bugs. The main problem is that this board uses the default Hard Reset +Configuration Word and not the 4 bytes located at start of FLASH because at +0xFE000000 is no FLASH. The FLASH consists out of 4 chips each 16bits wide. Be +carefull, the bytes are swapped. So DQ0-7 is the high byte, DQ8-15 ist the low +byte. + +The icache can only manually be enabled after reset. +The FLASH and main SDRAM is working with icache enabled. +The local SDRAM can only be used as data memory when icache is enabled. +If U-Boot runs in local SDRAM, TFTP does not work. +The functions in mii_phy.c are all working. Call mii_phy_discover() out of +eth_init() and solve the linker error. +I2C, RTC/NVRAM and PCMCIA are not working yet. + +TODO +The 32MB local SDRAM is working but not shown in the startup messages of +U-Boot. If you locate U-Boot or any other program to this area it won't run. +Turning the ichache off does not solve this problem. + +As I won't buy another RPX Super there might be some little work to do for you +getting this U-Boot port running on the final board. + + +frank.morauf@salzbrenner.com diff --git a/board/rpxsuper/rpxsuper.c b/board/rpxsuper/rpxsuper.c new file mode 100755 index 0000000..b4331f1 --- /dev/null +++ b/board/rpxsuper/rpxsuper.c @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2000 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2001 + * Advent Networks, Inc. <http://www.adventnetworks.com> + * Jay Monkman <jtm@smoothsmoothie.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ioports.h> +#include <mpc8260.h> +#include "rpxsuper.h" + +/* + * I/O Port configuration table + * + * if conf is 1, then that port pin will be configured at boot time + * according to the five values podr/pdir/ppar/psor/pdat for that entry + */ + +const iop_conf_t iop_conf_tab[4][32] = { + + /* Port A configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 *ATMTXEN */ + /* PA30 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTCA */ + /* PA29 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTSOC */ + /* PA28 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 *ATMRXEN */ + /* PA27 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRSOC */ + /* PA26 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRCA */ + /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[0] */ + /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[1] */ + /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[2] */ + /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[3] */ + /* PA21 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[4] */ + /* PA20 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[5] */ + /* PA19 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[6] */ + /* PA18 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[7] */ + /* PA17 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ + /* PA16 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ + /* PA15 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ + /* PA14 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ + /* PA13 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ + /* PA12 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ + /* PA11 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ + /* PA10 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ + /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ + /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ + /* PA7 */ { 1, 0, 0, 0, 0, 0 }, /* PA7 */ + /* PA6 */ { 1, 0, 0, 0, 0, 0 }, /* PA6 */ + /* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* PA5 */ + /* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* PA4 */ + /* PA3 */ { 1, 0, 0, 0, 0, 0 }, /* PA3 */ + /* PA2 */ { 1, 0, 0, 0, 0, 0 }, /* PA2 */ + /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* PA1 */ + /* PA0 */ { 1, 0, 0, 0, 0, 0 } /* PA0 */ + }, + + /* Port B configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */ + /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */ + /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */ + /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */ + /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */ + /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */ + /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */ + /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */ + /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */ + /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */ + /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ + /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */ + /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */ + /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + }, + + /* Port C */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 1, 0, 0, 1, 0, 0 }, /* PC31 */ + /* PC30 */ { 1, 0, 0, 1, 0, 0 }, /* PC30 */ + /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ + /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* PC28 */ + /* PC27 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */ + /* PC26 */ { 1, 0, 0, 1, 0, 0 }, /* PC26 */ + /* PC25 */ { 1, 0, 0, 1, 0, 0 }, /* PC25 */ + /* PC24 */ { 1, 0, 0, 1, 0, 0 }, /* PC24 */ + /* PC23 */ { 1, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ + /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ + /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ + /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ + /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ + /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ + /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */ + /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */ + /* PC15 */ { 1, 0, 0, 0, 0, 0 }, /* PC15 */ + /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ + /* PC13 */ { 1, 0, 0, 1, 0, 0 }, /* PC13 */ + /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* PC12 */ + /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* PC11 */ + /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDC */ + /* PC9 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */ + /* PC8 */ { 1, 0, 0, 1, 0, 0 }, /* PC8 */ + /* PC7 */ { 1, 0, 0, 1, 0, 0 }, /* PC7 */ + /* PC6 */ { 1, 0, 0, 1, 0, 0 }, /* PC6 */ + /* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* PC5 */ + /* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* PC4 */ + /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* PC3 */ + /* PC2 */ { 1, 0, 0, 1, 0, 1 }, /* ENET FDE */ + /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* ENET DSQE */ + /* PC0 */ { 1, 0, 0, 1, 0, 0 }, /* ENET LBK */ + }, + + /* Port D */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 EN RxD */ + /* PD30 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 EN TxD */ + /* PD29 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 EN TENA */ + /* PD28 */ { 1, 0, 0, 0, 0, 0 }, /* PD28 */ + /* PD27 */ { 1, 0, 0, 0, 0, 0 }, /* PD27 */ + /* PD26 */ { 1, 0, 0, 0, 0, 0 }, /* PD26 */ + /* PD25 */ { 1, 0, 0, 0, 0, 0 }, /* PD25 */ + /* PD24 */ { 1, 0, 0, 0, 0, 0 }, /* PD24 */ + /* PD23 */ { 1, 0, 0, 0, 0, 0 }, /* PD23 */ + /* PD22 */ { 1, 0, 0, 0, 0, 0 }, /* PD22 */ + /* PD21 */ { 1, 0, 0, 0, 0, 0 }, /* PD21 */ + /* PD20 */ { 1, 0, 0, 0, 0, 0 }, /* PD20 */ + /* PD19 */ { 1, 0, 0, 0, 0, 0 }, /* PD19 */ + /* PD18 */ { 1, 0, 0, 0, 0, 0 }, /* PD19 */ + /* PD17 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ + /* PD16 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXPRTY */ + /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ + /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 1, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 1, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 1, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ + /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ + /* PD7 */ { 1, 0, 0, 0, 0, 0 }, /* PD7 */ + /* PD6 */ { 1, 0, 0, 0, 0, 0 }, /* PD6 */ + /* PD5 */ { 1, 0, 0, 0, 0, 0 }, /* PD5 */ + /* PD4 */ { 1, 0, 0, 0, 0, 0 }, /* PD4 */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + } +}; + +/* ------------------------------------------------------------------------- */ + +/* + * Setup CS4 to enable the Board Control/Status registers. + * Otherwise the smcs won't work. +*/ +int board_early_init_f (void) +{ + volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE; + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8260_t *memctl = &immap->im_memctl; + memctl->memc_br4 = CFG_BR4_PRELIM; + memctl->memc_or4 = CFG_OR4_PRELIM; + regs->bcsr1 = 0x70; /* to enable terminal no SMC1 */ + regs->bcsr2 = 0x20; /* mut be written to enable writing FLASH */ + return 0; +} + +void +reset_phy(void) +{ + volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE; + regs->bcsr4 = 0xC3; +} + +/* + * Check Board Identity: + */ + +int checkboard(void) +{ + volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE; + printf ("Board: Embedded Planet RPX Super, Revision %d\n", + regs->bcsr0 >> 4); + + return 0; +} + +/* ------------------------------------------------------------------------- */ + +long int initdram(int board_type) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8260_t *memctl = &immap->im_memctl; + volatile uchar c = 0, *ramaddr; + ulong psdmr, lsdmr, bcr; + long size = 0; + int i; + + psdmr = CFG_PSDMR; + lsdmr = CFG_LSDMR; + + /* + * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): + * + * "At system reset, initialization software must set up the + * programmable parameters in the memory controller banks registers + * (ORx, BRx, P/LSDMR). After all memory parameters are configured, + * system software should execute the following initialization sequence + * for each SDRAM device. + * + * 1. Issue a PRECHARGE-ALL-BANKS command + * 2. Issue eight CBR REFRESH commands + * 3. Issue a MODE-SET command to initialize the mode register + * + * The initial commands are executed by setting P/LSDMR[OP] and + * accessing the SDRAM with a single-byte transaction." + * + * The appropriate BRx/ORx registers have already been set when we + * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE. + */ + + size = CFG_SDRAM0_SIZE; + bcr = immap->im_siu_conf.sc_bcr; + immap->im_siu_conf.sc_bcr = (bcr & ~BCR_EBM); + + memctl->memc_mptpr = CFG_MPTPR; + + ramaddr = (uchar *)(CFG_SDRAM0_BASE); + memctl->memc_psrt = CFG_PSRT; + + memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; + *ramaddr = c; + + memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; + for (i = 0; i < 8; i++) + *ramaddr = c; + + memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; + *ramaddr = c; + + memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN; + *ramaddr = c; + + immap->im_siu_conf.sc_bcr = bcr; + +#ifndef CFG_RAMBOOT +/* size += CFG_SDRAM1_SIZE; */ + ramaddr = (uchar *)(CFG_SDRAM1_BASE); + memctl->memc_lsrt = CFG_LSRT; + + memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA; + *ramaddr = c; + + memctl->memc_lsdmr = lsdmr | PSDMR_OP_CBRR; + for (i = 0; i < 8; i++) + *ramaddr = c; + + memctl->memc_lsdmr = lsdmr | PSDMR_OP_MRW; + *ramaddr = c; + + memctl->memc_lsdmr = lsdmr | PSDMR_OP_NORM | PSDMR_RFEN; + *ramaddr = c; +#endif + + /* return total ram size */ + return (size * 1024 * 1024); +} diff --git a/board/rpxsuper/rpxsuper.h b/board/rpxsuper/rpxsuper.h new file mode 100755 index 0000000..af31060 --- /dev/null +++ b/board/rpxsuper/rpxsuper.h @@ -0,0 +1,25 @@ +#ifndef __RPX8260_H__ +#define __RPX8260_H__ + +typedef struct tt_rpx_regs +{ + volatile unsigned char bcsr0; + volatile unsigned char bcsr1; + volatile unsigned char bcsr2; + volatile unsigned char bcsr3; + volatile unsigned char bcsr4; + volatile unsigned char bcsr5; + volatile unsigned char bcsr6; + volatile unsigned char bcsr7; + volatile unsigned char bcsr8; + volatile unsigned char bcsr9; + volatile unsigned char bcsr10; + volatile unsigned char bcsr11; + volatile unsigned char bcsr12; + volatile unsigned char bcsr13; + volatile unsigned char bcsr14; + volatile unsigned char bcsr15; +} t_rpx_regs; +typedef t_rpx_regs* tp_rpx_regs; + +#endif diff --git a/board/rpxsuper/u-boot.lds b/board/rpxsuper/u-boot.lds new file mode 100755 index 0000000..9e623d0 --- /dev/null +++ b/board/rpxsuper/u-boot.lds @@ -0,0 +1,125 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8260/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} |