init commit via android 4.4 uboot

1 files changed, 259 insertions, 0 deletions

diff --git a/board/mousse/mousse.h b/board/mousse/mousse.h
new file mode 100755
index 0000000..5468314
--- /dev/null
+++ b/board/mousse/mousse.h
@@ -0,0 +1,259 @@
+/*
+ * MOUSSE/MPC8240 Board definitions.
+ * For more info, see http://www.vooha.com/
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty (jfd@cs.stanford.edu)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MOUSSE_H
+#define __MOUSSE_H
+
+/* System addresses */
+
+#define PCI_SPECIAL_BASE	0xfe000000
+#define PCI_SPECIAL_SIZE	0x01000000
+
+/* PORTX Device Addresses for Mousse */
+
+#define PORTX_DEV_BASE		0xff000000
+#define PORTX_DEV_SIZE		0x01000000
+
+#define ENET_DEV_BASE		0x80000000
+
+#define PLD_REG_BASE		(PORTX_DEV_BASE | 0xe09000)
+#define PLD_REG(off)		(*(volatile unsigned char *) \
+				 (PLD_REG_BASE + (off)))
+
+#define PLD_REVID_B1		0x7f
+#define PLD_REVID_B2		0x01
+
+/* MPLD */
+#define SYS_HARD_RESET()	{ for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
+#define SYS_REVID_GET()		((int) PLD_REG(0) & 0x7f)
+#define SYS_LED_OFF()		(PLD_REG(1) |= 0x80)
+#define SYS_LED_ON()		(PLD_REG(1) &= ~0x80)
+#define SYS_WATCHDOG_IRQ3()	(PLD_REG(2) |= 0x80)
+#define SYS_WATCHDOG_RESET()	(PLD_REG(2) &= ~0x80)
+#define SYS_TOD_PROTECT()	(PLD_REG(3) |= 0x80)
+#define SYS_TOD_UNPROTECT()	(PLD_REG(3) &= ~0x80)
+
+/* SGS M48T59Y */
+#define TOD_BASE		(PORTX_DEV_BASE | 0xe0a000)
+#define TOD_REG_BASE		(TOD_BASE | 0x1ff0)
+#define TOD_NVRAM_BASE		TOD_BASE
+#define TOD_NVRAM_SIZE		0x1ff0
+#define TOD_NVRAM_LIMIT		(TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
+
+/* NS16552 SIO */
+#define SERIAL_BASE(_x)		(PORTX_DEV_BASE | 0xe08000 | ((_x) ? 0 : 0x80))
+#define N_SIO_CHANNELS		2
+#define N_COM_PORTS		N_SIO_CHANNELS
+
+/*
+ * On-board Dec21143 PCI Ethernet
+ * Note: The PCI MBAR chosen here was used from MPC8240UM which states
+ * that PCI memory is at: 0x80000 - 0xFDFFFFFF, if AMBOR[CPU_FD_ALIAS]
+ * is set, then PCI memory maps 1-1 with this address range in the
+ * correct byte order.
+ */
+#define PCI_ENET_IOADDR		0x80000000
+#define PCI_ENET_MEMADDR	0x80000000
+
+/*
+ * Flash Memory Layout
+ *
+ *    2 MB Flash Bank 0 runs in 8-bit mode.  In Flash Bank 0, the 32 kB
+ *    sector SA3 is obscured by the 32 kB serial/TOD access space, and
+ *    the 64 kB sectors SA19-SA26 are obscured by the 512 kB PLCC
+ *    containing the fixed boot ROM.  (If the 512 kB PLCC is
+ *    deconfigured by jumper, this window to Flash Bank 0 becomes
+ *    visible, but it still contains the fixed boot code and should be
+ *    considered read-only).  Flash Bank 0 sectors SA0 (16 kB), SA1 (8
+ *    kB), and SA2 (8 kB) are currently unused.
+ *
+ *    2 MB Flash Bank 1 runs in 16-bit mode.  Flash Bank 1 is fully
+ *    usable, but it's a 16-bit wide device on a 64-bit bus.  Therefore
+ *    16-bit words only exist at addresses that are multiples of 8.  All
+ *    PROM data and control addresses must be multiplied by 8.
+ *
+ *    See flashMap.c for description of flash filesystem layout.
+ */
+
+/*
+ * FLASH memory address space: 8-bit wide FLASH memory spaces.
+ */
+#define FLASH0_SEG0_START	0xffe00000	 /* Baby 32Kb segment */
+#define FLASH0_SEG0_END		0xffe07fff	 /* 16 kB + 8 kB + 8 kB */
+#define FLASH0_SEG0_SIZE	0x00008000	 /*   (sectors SA0-SA2) */
+
+#define FLASH0_SEG1_START	0xffe10000	 /* 1MB - 64Kb FLASH0 seg */
+#define FLASH0_SEG1_END		0xffefffff	 /* 960 kB */
+#define FLASH0_SEG1_SIZE	0x000f0000
+
+#define FLASH0_SEG2_START	0xfff00000	 /* Boot Loader stored here */
+#define FLASH0_SEG2_END		0xfff7ffff	 /* 512 kB FLASH0/PLCC seg */
+#define FLASH0_SEG2_SIZE	0x00080000
+
+#define FLASH0_SEG3_START	0xfff80000	 /* 512 kB FLASH0 seg */
+#define FLASH0_SEG3_END		0xffffffff
+#define FLASH0_SEG3_SIZE	0x00080000
+
+/* Where Kahlua starts */
+#define FLASH_RESET_VECT	0xfff00100
+
+/*
+ * CHRP / PREP (MAP A/B) definitions.
+ */
+
+#define PREP_REG_ADDR		0x80000cf8	/* MPC107 Config, Map A */
+#define PREP_REG_DATA		0x80000cfc	/* MPC107 Config, Map A */
+/* MPC107 (MPC8240 internal EUMBBAR mapped) */
+#define CHRP_REG_ADDR		0xfec00000	/* MPC106 Config, Map B */
+#define CHRP_REG_DATA		0xfee00000	/* MPC106 Config, Map B */
+
+/*
+ * Mousse PCI IDSEL Assignments (Device Number)
+ */
+#define MOUSSE_IDSEL_ENET	13		/* On-board 21143 Ethernet */
+#define MOUSSE_IDSEL_LPCI	14		/* On-board PCI slot */
+#define MOUSSE_IDSEL_82371	15		/* That other thing */
+#define MOUSSE_IDSEL_CPCI2	31		/* CPCI slot 2 */
+#define MOUSSE_IDSEL_CPCI3	30		/* CPCI slot 3 */
+#define MOUSSE_IDSEL_CPCI4	29		/* CPCI slot 4 */
+#define MOUSSE_IDSEL_CPCI5	28		/* CPCI slot 5 */
+#define MOUSSE_IDSEL_CPCI6	27		/* CPCI slot 6 */
+
+/*
+ * Mousse Interrupt Mapping:
+ *
+ *	IRQ1	Enet (intA|intB|intC|intD)
+ *	IRQ2	CPCI intA (See below)
+ *	IRQ3	Local PCI slot intA|intB|intC|intD
+ *	IRQ4	COM1 Serial port (Actually higher addressed port on duart)
+ *
+ * PCI Interrupt Mapping in CPCI chassis:
+ *
+ *		   |	       CPCI Slot
+ *		   | 1 (CPU)	2	3	4	5	6
+ *	-----------+--------+-------+-------+-------+-------+-------+
+ *	  intA	   |	X		X		X
+ *	  intB	   |		X		X		X
+ *	  intC	   |	X		X		X
+ *	  intD	   |		X		X		X
+ */
+
+
+#define EPIC_VECTOR_EXT0	0
+#define EPIC_VECTOR_EXT1	1
+#define EPIC_VECTOR_EXT2	2
+#define EPIC_VECTOR_EXT3	3
+#define EPIC_VECTOR_EXT4	4
+#define EPIC_VECTOR_TM0		16
+#define EPIC_VECTOR_TM1		17
+#define EPIC_VECTOR_TM2		18
+#define EPIC_VECTOR_TM3		19
+#define EPIC_VECTOR_I2C		20
+#define EPIC_VECTOR_DMA0	21
+#define EPIC_VECTOR_DMA1	22
+#define EPIC_VECTOR_I2O		23
+
+
+#define INT_VEC_IRQ0		0
+#define INT_NUM_IRQ0		INT_VEC_IRQ0
+#define MOUSSE_IRQ_ENET		EPIC_VECTOR_EXT1	/* Hardwired */
+#define MOUSSE_IRQ_CPCI		EPIC_VECTOR_EXT2	/* Hardwired */
+#define MOUSSE_IRQ_LPCI		EPIC_VECTOR_EXT3	/* Hardwired */
+#define MOUSSE_IRQ_DUART	EPIC_VECTOR_EXT4	/* Hardwired */
+
+/* Onboard DEC 21143 Ethernet */
+#define PCI_ENET_MEMADDR	0x80000000
+#define PCI_ENET_IOADDR		0x80000000
+
+/* Some other PCI device */
+#define PCI_SLOT_MEMADDR	0x81000000
+#define PCI_SLOT_IOADDR		0x81000000
+
+/* Promise ATA66 PCI Device (ATA controller) */
+#define PROMISE_MBAR0  0xa0000000
+#define PROMISE_MBAR1  (PROMISE_MBAR0 + 0x1000)
+#define PROMISE_MBAR2  (PROMISE_MBAR0 + 0x2000)
+#define PROMISE_MBAR3  (PROMISE_MBAR0 + 0x3000)
+#define PROMISE_MBAR4  (PROMISE_MBAR0 + 0x4000)
+#define PROMISE_MBAR5  (PROMISE_MBAR0 + 0x5000)
+
+/* ATA/66 Controller offsets */
+#define CFG_ATA_BASE_ADDR     PROMISE_MBAR0
+#define CFG_IDE_MAXBUS	       2 /* ide0/ide1 */
+#define CFG_IDE_MAXDEVICE      2 /* 2 drives per controller */
+#define CFG_ATA_IDE0_OFFSET    0
+#define CFG_ATA_IDE1_OFFSET    0x3000
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define CFG_ATA_DATA_OFFSET    0
+#define CFG_ATA_REG_OFFSET     0
+#define CFG_ATA_ALT_OFFSET    (0x1000)
+
+/*
+ * The constants ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, and RAM_LOW_ADRS
+ * are defined in config.h and Makefile.
+ * All definitions for these constants must be identical.
+ */
+#define ROM_BASE_ADRS		0xfff00000	/* base address of ROM */
+#define ROM_TEXT_ADRS		(ROM_BASE_ADRS+0x0100) /* with PC & SP */
+#define ROM_WARM_ADRS		(ROM_TEXT_ADRS+0x0004) /* warm reboot entry */
+#define ROM_SIZE		0x00080000	/* 512KB ROM space */
+#define RAM_LOW_ADRS		0x00010000   /* RAM address for vxWorks */
+#define RAM_HIGH_ADRS		0x00c00000   /* RAM address for bootrom */
+
+/*
+ *  NVRAM configuration
+ *  NVRAM is implemented via the SGS Thomson M48T59Y
+ *  64Kbit (8Kbx8) Timekeeper SRAM.
+ *  This 8KB NVRAM also has a TOD. See m48t59y.{h,c} for more information.
+ */
+
+#define NV_RAM_ADRS		TOD_NVRAM_BASE
+#define NV_RAM_INTRVL		1
+#define NV_RAM_WR_ENBL		SYS_TOD_UNPROTECT()
+#define NV_RAM_WR_DSBL		SYS_TOD_PROTECT()
+
+#define NV_OFF_BOOT0		0x0000	/* Boot string 0 (256b) */
+#define NV_OFF_BOOT1		0x0100	/* Boot string 1 (256b) */
+#define NV_OFF_BOOT2		0x0200	/* Boot string 2 (256b)*/
+#define NV_OFF_MACADDR		0x0400	/* 21143 MAC address (6b) */
+#define NV_OFF_ACTIVEBOOT	0x0406	/* Active boot string, 0 to 2 (1b) */
+#define NV_OFF_UNUSED1		0x0407	/* Unused (1b) */
+#define NV_OFF_BINDFIX		0x0408	/* See sysLib.c:sysBindFix() (1b) */
+#define NV_OFF_UNUSED2		0x0409	/* Unused (7b) */
+#define NV_OFF_TIMEZONE		0x0410	/* TIMEZONE env var (64b) */
+#define NV_OFF_VXWORKS_END	0x07FF	/* 2047 VxWorks Total */
+#define NV_OFF_U_BOOT		0x0800	/* 2048 U-Boot boot-loader */
+#define NV_OFF_U_BOOT_ADDR	(TOD_BASE + NV_OFF_U_BOOT) /* sysaddr*/
+#define NV_U_BOOT_ENV_SIZE	2048	/* 2K - U-Boot Total */
+#define NV_OFF__next_free	(NV_U_BOOT_ENVSIZE +1)
+#define NV_RAM_SIZE		8176	/* NVRAM End */
+
+#endif /* __MOUSSE_H */