diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c new file mode 100644 index 00000000..590f902d --- /dev/null +++ b/drivers/net/phy/micrel.c @@ -0,0 +1,251 @@ +/* + * drivers/net/phy/micrel.c + * + * Driver for Micrel PHYs + * + * Author: David J. Choi + * + * Copyright (c) 2010 Micrel, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Support : ksz9021 1000/100/10 phy from Micrel + * ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/micrel_phy.h> + +/* general Interrupt control/status reg in vendor specific block. */ +#define MII_KSZPHY_INTCS 0x1B +#define KSZPHY_INTCS_JABBER (1 << 15) +#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14) +#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13) +#define KSZPHY_INTCS_PARELLEL (1 << 12) +#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11) +#define KSZPHY_INTCS_LINK_DOWN (1 << 10) +#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9) +#define KSZPHY_INTCS_LINK_UP (1 << 8) +#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ + KSZPHY_INTCS_LINK_DOWN) + +/* general PHY control reg in vendor specific block. */ +#define MII_KSZPHY_CTRL 0x1F +/* bitmap of PHY register to set interrupt mode */ +#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) +#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) +#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) +#define KSZ8051_RMII_50MHZ_CLK (1 << 7) + +static int kszphy_ack_interrupt(struct phy_device *phydev) +{ + /* bit[7..0] int status, which is a read and clear register. */ + int rc; + + rc = phy_read(phydev, MII_KSZPHY_INTCS); + + return (rc < 0) ? rc : 0; +} + +static int kszphy_set_interrupt(struct phy_device *phydev) +{ + int temp; + temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ? + KSZPHY_INTCS_ALL : 0; + return phy_write(phydev, MII_KSZPHY_INTCS, temp); +} + +static int kszphy_config_intr(struct phy_device *phydev) +{ + int temp, rc; + + /* set the interrupt pin active low */ + temp = phy_read(phydev, MII_KSZPHY_CTRL); + temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH; + phy_write(phydev, MII_KSZPHY_CTRL, temp); + rc = kszphy_set_interrupt(phydev); + return rc < 0 ? rc : 0; +} + +static int ksz9021_config_intr(struct phy_device *phydev) +{ + int temp, rc; + + /* set the interrupt pin active low */ + temp = phy_read(phydev, MII_KSZPHY_CTRL); + temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH; + phy_write(phydev, MII_KSZPHY_CTRL, temp); + rc = kszphy_set_interrupt(phydev); + return rc < 0 ? rc : 0; +} + +static int ks8737_config_intr(struct phy_device *phydev) +{ + int temp, rc; + + /* set the interrupt pin active low */ + temp = phy_read(phydev, MII_KSZPHY_CTRL); + temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH; + phy_write(phydev, MII_KSZPHY_CTRL, temp); + rc = kszphy_set_interrupt(phydev); + return rc < 0 ? rc : 0; +} + +static int kszphy_config_init(struct phy_device *phydev) +{ + return 0; +} + +static int ks8051_config_init(struct phy_device *phydev) +{ + int regval; + + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + regval = phy_read(phydev, MII_KSZPHY_CTRL); + regval |= KSZ8051_RMII_50MHZ_CLK; + phy_write(phydev, MII_KSZPHY_CTRL, regval); + } + + return 0; +} + +static struct phy_driver ks8737_driver = { + .phy_id = PHY_ID_KS8737, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KS8737", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = ks8737_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ks8041_driver = { + .phy_id = PHY_ID_KS8041, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KS8041", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ks8051_driver = { + .phy_id = PHY_ID_KS8051, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KS8051", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = ks8051_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ks8001_driver = { + .phy_id = PHY_ID_KS8001, + .name = "Micrel KS8001 or KS8721", + .phy_id_mask = 0x00fffff0, + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ksz9021_driver = { + .phy_id = PHY_ID_KSZ9021, + .phy_id_mask = 0x000fff10, + .name = "Micrel KSZ9021 Gigabit PHY", + .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause + | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = ksz9021_config_intr, + .driver = { .owner = THIS_MODULE, }, +}; + +static int __init ksphy_init(void) +{ + int ret; + + ret = phy_driver_register(&ks8001_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&ksz9021_driver); + if (ret) + goto err2; + + ret = phy_driver_register(&ks8737_driver); + if (ret) + goto err3; + ret = phy_driver_register(&ks8041_driver); + if (ret) + goto err4; + ret = phy_driver_register(&ks8051_driver); + if (ret) + goto err5; + + return 0; + +err5: + phy_driver_unregister(&ks8041_driver); +err4: + phy_driver_unregister(&ks8737_driver); +err3: + phy_driver_unregister(&ksz9021_driver); +err2: + phy_driver_unregister(&ks8001_driver); +err1: + return ret; +} + +static void __exit ksphy_exit(void) +{ + phy_driver_unregister(&ks8001_driver); + phy_driver_unregister(&ks8737_driver); + phy_driver_unregister(&ksz9021_driver); + phy_driver_unregister(&ks8041_driver); + phy_driver_unregister(&ks8051_driver); +} + +module_init(ksphy_init); +module_exit(ksphy_exit); + +MODULE_DESCRIPTION("Micrel PHY driver"); +MODULE_AUTHOR("David J. Choi"); +MODULE_LICENSE("GPL"); + +static struct mdio_device_id __maybe_unused micrel_tbl[] = { + { PHY_ID_KSZ9021, 0x000fff10 }, + { PHY_ID_KS8001, 0x00fffff0 }, + { PHY_ID_KS8737, 0x00fffff0 }, + { PHY_ID_KS8041, 0x00fffff0 }, + { PHY_ID_KS8051, 0x00fffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, micrel_tbl); |