Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 251 insertions, 0 deletions

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 00000000..590f902d
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,251 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 1000/100/10 phy from Micrel
+ *		ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS			0x1B
+#define	KSZPHY_INTCS_JABBER			(1 << 15)
+#define	KSZPHY_INTCS_RECEIVE_ERR		(1 << 14)
+#define	KSZPHY_INTCS_PAGE_RECEIVE		(1 << 13)
+#define	KSZPHY_INTCS_PARELLEL			(1 << 12)
+#define	KSZPHY_INTCS_LINK_PARTNER_ACK		(1 << 11)
+#define	KSZPHY_INTCS_LINK_DOWN			(1 << 10)
+#define	KSZPHY_INTCS_REMOTE_FAULT		(1 << 9)
+#define	KSZPHY_INTCS_LINK_UP			(1 << 8)
+#define	KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
+						KSZPHY_INTCS_LINK_DOWN)
+
+/* general PHY control reg in vendor specific block. */
+#define	MII_KSZPHY_CTRL			0x1F
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH		(1 << 9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH		(1 << 14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH		(1 << 14)
+#define KSZ8051_RMII_50MHZ_CLK			(1 << 7)
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+	/* bit[7..0] int status, which is a read and clear register. */
+	int rc;
+
+	rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+	return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_set_interrupt(struct phy_device *phydev)
+{
+	int temp;
+	temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
+		KSZPHY_INTCS_ALL : 0;
+	return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+	int temp, rc;
+
+	/* set the interrupt pin active low */
+	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
+	phy_write(phydev, MII_KSZPHY_CTRL, temp);
+	rc = kszphy_set_interrupt(phydev);
+	return rc < 0 ? rc : 0;
+}
+
+static int ksz9021_config_intr(struct phy_device *phydev)
+{
+	int temp, rc;
+
+	/* set the interrupt pin active low */
+	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
+	phy_write(phydev, MII_KSZPHY_CTRL, temp);
+	rc = kszphy_set_interrupt(phydev);
+	return rc < 0 ? rc : 0;
+}
+
+static int ks8737_config_intr(struct phy_device *phydev)
+{
+	int temp, rc;
+
+	/* set the interrupt pin active low */
+	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
+	phy_write(phydev, MII_KSZPHY_CTRL, temp);
+	rc = kszphy_set_interrupt(phydev);
+	return rc < 0 ? rc : 0;
+}
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int ks8051_config_init(struct phy_device *phydev)
+{
+	int regval;
+
+	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+		regval = phy_read(phydev, MII_KSZPHY_CTRL);
+		regval |= KSZ8051_RMII_50MHZ_CLK;
+		phy_write(phydev, MII_KSZPHY_CTRL, regval);
+	}
+
+	return 0;
+}
+
+static struct phy_driver ks8737_driver = {
+	.phy_id		= PHY_ID_KS8737,
+	.phy_id_mask	= 0x00fffff0,
+	.name		= "Micrel KS8737",
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= ks8737_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8041_driver = {
+	.phy_id		= PHY_ID_KS8041,
+	.phy_id_mask	= 0x00fffff0,
+	.name		= "Micrel KS8041",
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
+				| SUPPORTED_Asym_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8051_driver = {
+	.phy_id		= PHY_ID_KS8051,
+	.phy_id_mask	= 0x00fffff0,
+	.name		= "Micrel KS8051",
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
+				| SUPPORTED_Asym_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= ks8051_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8001_driver = {
+	.phy_id		= PHY_ID_KS8001,
+	.name		= "Micrel KS8001 or KS8721",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+	.phy_id		= PHY_ID_KSZ9021,
+	.phy_id_mask	= 0x000fff10,
+	.name		= "Micrel KSZ9021 Gigabit PHY",
+	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
+				| SUPPORTED_Asym_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= ksz9021_config_intr,
+	.driver		= { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&ks8001_driver);
+	if (ret)
+		goto err1;
+
+	ret = phy_driver_register(&ksz9021_driver);
+	if (ret)
+		goto err2;
+
+	ret = phy_driver_register(&ks8737_driver);
+	if (ret)
+		goto err3;
+	ret = phy_driver_register(&ks8041_driver);
+	if (ret)
+		goto err4;
+	ret = phy_driver_register(&ks8051_driver);
+	if (ret)
+		goto err5;
+
+	return 0;
+
+err5:
+	phy_driver_unregister(&ks8041_driver);
+err4:
+	phy_driver_unregister(&ks8737_driver);
+err3:
+	phy_driver_unregister(&ksz9021_driver);
+err2:
+	phy_driver_unregister(&ks8001_driver);
+err1:
+	return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+	phy_driver_unregister(&ks8001_driver);
+	phy_driver_unregister(&ks8737_driver);
+	phy_driver_unregister(&ksz9021_driver);
+	phy_driver_unregister(&ks8041_driver);
+	phy_driver_unregister(&ks8051_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused micrel_tbl[] = {
+	{ PHY_ID_KSZ9021, 0x000fff10 },
+	{ PHY_ID_KS8001, 0x00fffff0 },
+	{ PHY_ID_KS8737, 0x00fffff0 },
+	{ PHY_ID_KS8041, 0x00fffff0 },
+	{ PHY_ID_KS8051, 0x00fffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);