diff options
Diffstat (limited to 'ANDROID_3.4.5/include/linux/sm501.h')
| -rw-r--r-- | ANDROID_3.4.5/include/linux/sm501.h | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/ANDROID_3.4.5/include/linux/sm501.h b/ANDROID_3.4.5/include/linux/sm501.h deleted file mode 100644 index 02fde50a..00000000 --- a/ANDROID_3.4.5/include/linux/sm501.h +++ /dev/null @@ -1,182 +0,0 @@ -/* include/linux/sm501.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -extern int sm501_unit_power(struct device *dev, - unsigned int unit, unsigned int to); - -extern unsigned long sm501_set_clock(struct device *dev, - int clksrc, unsigned long freq); - -extern unsigned long sm501_find_clock(struct device *dev, - int clksrc, unsigned long req_freq); - -/* sm501_misc_control - * - * Modify the SM501's MISC_CONTROL register -*/ - -extern int sm501_misc_control(struct device *dev, - unsigned long set, unsigned long clear); - -/* sm501_modify_reg - * - * Modify a register in the SM501 which may be shared with other - * drivers. -*/ - -extern unsigned long sm501_modify_reg(struct device *dev, - unsigned long reg, - unsigned long set, - unsigned long clear); - - -/* Platform data definitions */ - -#define SM501FB_FLAG_USE_INIT_MODE (1<<0) -#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1) -#define SM501FB_FLAG_USE_HWCURSOR (1<<2) -#define SM501FB_FLAG_USE_HWACCEL (1<<3) -#define SM501FB_FLAG_PANEL_NO_FPEN (1<<4) -#define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5) -#define SM501FB_FLAG_PANEL_INV_FPEN (1<<6) -#define SM501FB_FLAG_PANEL_INV_VBIASEN (1<<7) - -struct sm501_platdata_fbsub { - struct fb_videomode *def_mode; - unsigned int def_bpp; - unsigned long max_mem; - unsigned int flags; -}; - -enum sm501_fb_routing { - SM501_FB_OWN = 0, /* CRT=>CRT, Panel=>Panel */ - SM501_FB_CRT_PANEL = 1, /* Panel=>CRT, Panel=>Panel */ -}; - -/* sm501_platdata_fb flag field bit definitions */ - -#define SM501_FBPD_SWAP_FB_ENDIAN (1<<0) /* need to endian swap */ - -/* sm501_platdata_fb - * - * configuration data for the framebuffer driver -*/ - -struct sm501_platdata_fb { - enum sm501_fb_routing fb_route; - unsigned int flags; - struct sm501_platdata_fbsub *fb_crt; - struct sm501_platdata_fbsub *fb_pnl; -}; - -/* gpio i2c - * - * Note, we have to pass in the bus number, as the number used will be - * passed to the i2c-gpio driver's platform_device.id, subsequently used - * to register the i2c bus. -*/ - -struct sm501_platdata_gpio_i2c { - unsigned int bus_num; - unsigned int pin_sda; - unsigned int pin_scl; - int udelay; - int timeout; -}; - -/* sm501_initdata - * - * use for initialising values that may not have been setup - * before the driver is loaded. -*/ - -struct sm501_reg_init { - unsigned long set; - unsigned long mask; -}; - -#define SM501_USE_USB_HOST (1<<0) -#define SM501_USE_USB_SLAVE (1<<1) -#define SM501_USE_SSP0 (1<<2) -#define SM501_USE_SSP1 (1<<3) -#define SM501_USE_UART0 (1<<4) -#define SM501_USE_UART1 (1<<5) -#define SM501_USE_FBACCEL (1<<6) -#define SM501_USE_AC97 (1<<7) -#define SM501_USE_I2S (1<<8) -#define SM501_USE_GPIO (1<<9) - -#define SM501_USE_ALL (0xffffffff) - -struct sm501_initdata { - struct sm501_reg_init gpio_low; - struct sm501_reg_init gpio_high; - struct sm501_reg_init misc_timing; - struct sm501_reg_init misc_control; - - unsigned long devices; - unsigned long mclk; /* non-zero to modify */ - unsigned long m1xclk; /* non-zero to modify */ -}; - -/* sm501_init_gpio - * - * default gpio settings -*/ - -struct sm501_init_gpio { - struct sm501_reg_init gpio_data_low; - struct sm501_reg_init gpio_data_high; - struct sm501_reg_init gpio_ddr_low; - struct sm501_reg_init gpio_ddr_high; -}; - -#define SM501_FLAG_SUSPEND_OFF (1<<4) - -/* sm501_platdata - * - * This is passed with the platform device to allow the board - * to control the behaviour of the SM501 driver(s) which attach - * to the device. - * -*/ - -struct sm501_platdata { - struct sm501_initdata *init; - struct sm501_init_gpio *init_gpiop; - struct sm501_platdata_fb *fb; - - int flags; - int gpio_base; - - int (*get_power)(struct device *dev); - int (*set_power)(struct device *dev, unsigned int on); - - struct sm501_platdata_gpio_i2c *gpio_i2c; - unsigned int gpio_i2c_nr; -}; - -#if defined(CONFIG_PPC32) -#define smc501_readl(addr) ioread32be((addr)) -#define smc501_writel(val, addr) iowrite32be((val), (addr)) -#else -#define smc501_readl(addr) readl(addr) -#define smc501_writel(val, addr) writel(val, addr) -#endif |