diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/powerpc/boot/dts/ge_imp3a.dts')
| -rw-r--r-- | ANDROID_3.4.5/arch/powerpc/boot/dts/ge_imp3a.dts | 255 |
1 files changed, 0 insertions, 255 deletions
diff --git a/ANDROID_3.4.5/arch/powerpc/boot/dts/ge_imp3a.dts b/ANDROID_3.4.5/arch/powerpc/boot/dts/ge_imp3a.dts deleted file mode 100644 index fefae416..00000000 --- a/ANDROID_3.4.5/arch/powerpc/boot/dts/ge_imp3a.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* - * GE IMP3A Device Tree Source - * - * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Based on: P2020 DS Device Tree Source - * Copyright 2009 Freescale Semiconductor Inc. - */ - -/include/ "fsl/p2020si-pre.dtsi" - -/ { - model = "GE_IMP3A"; - compatible = "ge,imp3a"; - - memory { - device_type = "memory"; - }; - - lbc: localbus@fef05000 { - reg = <0 0xfef05000 0 0x1000>; - - ranges = <0x0 0x0 0x0 0xff000000 0x01000000 - 0x1 0x0 0x0 0xe0000000 0x08000000 - 0x2 0x0 0x0 0xe8000000 0x08000000 - 0x3 0x0 0x0 0xfc100000 0x00020000 - 0x4 0x0 0x0 0xfc000000 0x00008000 - 0x5 0x0 0x0 0xfc008000 0x00008000 - 0x6 0x0 0x0 0xfee00000 0x00040000 - 0x7 0x0 0x0 0xfee80000 0x00040000>; - - /* nor@0,0 is a mirror of part of the memory in nor@1,0 - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x1000000>; - read-only; - }; - }; - */ - - nor@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "ge,imp3a-paged-flash", "cfi-flash"; - reg = <0x1 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - label = "user"; - reg = <0x0 0x7800000>; - }; - - partition@7800000 { - label = "firmware"; - reg = <0x7800000 0x800000>; - read-only; - }; - }; - - nvram@3,0 { - device_type = "nvram"; - compatible = "simtek,stk14ca8"; - reg = <0x3 0x0 0x20000>; - }; - - fpga@4,0 { - compatible = "ge,imp3a-fpga-regs"; - reg = <0x4 0x0 0x20>; - }; - - gef_pic: pic@4,20 { - #interrupt-cells = <1>; - interrupt-controller; - device_type = "interrupt-controller"; - compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; - reg = <0x4 0x20 0x20>; - interrupts = <6 7 0 0>; - }; - - gef_gpio: gpio@4,400 { - #gpio-cells = <2>; - compatible = "ge,imp3a-gpio"; - reg = <0x4 0x400 0x24>; - gpio-controller; - }; - - wdt@4,800 { - compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", - "gef,fpga-wdt"; - reg = <0x4 0x800 0x8>; - interrupts = <10 4>; - interrupt-parent = <&gef_pic>; - }; - - /* Second watchdog available, driver currently supports one. - wdt@4,808 { - compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", - "gef,fpga-wdt"; - reg = <0x4 0x808 0x8>; - interrupts = <9 4>; - interrupt-parent = <&gef_pic>; - }; - */ - - nand@6,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; - - nand@7,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x7 0x0 0x40000>; - }; - }; - - soc: soc@fef00000 { - ranges = <0x0 0 0xfef00000 0x100000>; - - i2c@3000 { - hwmon@48 { - compatible = "national,lm92"; - reg = <0x48>; - }; - - hwmon@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - - rtc@51 { - compatible = "epson,rx8581"; - reg = <0x51>; - }; - - eti@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; - }; - - usb@22000 { - phy_type = "ulpi"; - dr_mode = "host"; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0xc 0x4>; - reg = <0x1>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&gef_pic>; - interrupts = <0xb 0x4>; - reg = <0x2>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - status = "disabled"; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "gmii"; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "gmii"; - }; - - enet2: ethernet@26000 { - status = "disabled"; - }; - }; - - pci0: pcie@fef08000 { - ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; - reg = <0 0xfef08000 0 0x1000>; - - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; - }; - - pci1: pcie@fef09000 { - reg = <0 0xfef09000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; - - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; - - }; - - pci2: pcie@fef0a000 { - reg = <0 0xfef0a000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; - - pcie@0 { - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; - }; -}; - -/include/ "fsl/p2020si-post.dtsi" |