Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

28 files changed, 10487 insertions, 0 deletions

diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
new file mode 100644
index 00000000..28cf3082
--- /dev/null
+++ b/drivers/block/paride/Kconfig
@@ -0,0 +1,300 @@
+#
+# PARIDE configuration
+#
+# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
+# PARIDE must also be a module.
+# PARIDE only supports PC style parports. Tough for USB or other parports...
+
+comment "Parallel IDE high-level drivers"
+	depends on PARIDE
+
+config PARIDE_PD
+	tristate "Parallel port IDE disks"
+	depends on PARIDE
+	help
+	  This option enables the high-level driver for IDE-type disk devices
+	  connected through a parallel port. If you chose to build PARIDE
+	  support into your kernel, you may answer Y here to build in the
+	  parallel port IDE driver, otherwise you should answer M to build
+	  it as a loadable module. The module will be called pd. You
+	  must also have at least one parallel port protocol driver in your
+	  system. Among the devices supported by this driver are the SyQuest
+	  EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
+	  hard drives from MicroSolutions.
+
+config PARIDE_PCD
+	tristate "Parallel port ATAPI CD-ROMs"
+	depends on PARIDE
+	---help---
+	  This option enables the high-level driver for ATAPI CD-ROM devices
+	  connected through a parallel port. If you chose to build PARIDE
+	  support into your kernel, you may answer Y here to build in the
+	  parallel port ATAPI CD-ROM driver, otherwise you should answer M to
+	  build it as a loadable module. The module will be called pcd. You
+	  must also have at least one parallel port protocol driver in your
+	  system. Among the devices supported by this driver are the
+	  MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
+	  you have such a CD-ROM drive, you should also say Y or M to "ISO
+	  9660 CD-ROM file system support" below, because that's the file
+	  system used on CD-ROMs.
+
+config PARIDE_PF
+	tristate "Parallel port ATAPI disks"
+	depends on PARIDE
+	help
+	  This option enables the high-level driver for ATAPI disk devices
+	  connected through a parallel port. If you chose to build PARIDE
+	  support into your kernel, you may answer Y here to build in the
+	  parallel port ATAPI disk driver, otherwise you should answer M
+	  to build it as a loadable module. The module will be called pf.
+	  You must also have at least one parallel port protocol driver in
+	  your system. Among the devices supported by this driver are the
+	  MicroSolutions backpack PD/CD drive and the Imation Superdisk
+	  LS-120 drive.
+
+config PARIDE_PT
+	tristate "Parallel port ATAPI tapes"
+	depends on PARIDE
+	help
+	  This option enables the high-level driver for ATAPI tape devices
+	  connected through a parallel port. If you chose to build PARIDE
+	  support into your kernel, you may answer Y here to build in the
+	  parallel port ATAPI disk driver, otherwise you should answer M
+	  to build it as a loadable module. The module will be called pt.
+	  You must also have at least one parallel port protocol driver in
+	  your system. Among the devices supported by this driver is the
+	  parallel port version of the HP 5GB drive.
+
+config PARIDE_PG
+	tristate "Parallel port generic ATAPI devices"
+	depends on PARIDE
+	---help---
+	  This option enables a special high-level driver for generic ATAPI
+	  devices connected through a parallel port. The driver allows user
+	  programs, such as cdrtools, to send ATAPI commands directly to a
+	  device.
+
+	  If you chose to build PARIDE support into your kernel, you may
+	  answer Y here to build in the parallel port generic ATAPI driver,
+	  otherwise you should answer M to build it as a loadable module. The
+	  module will be called pg.
+
+	  You must also have at least one parallel port protocol driver in
+	  your system.
+
+	  This driver implements an API loosely related to the generic SCSI
+	  driver. See <file:include/linux/pg.h>. for details.
+
+	  You can obtain the most recent version of cdrtools from
+	  <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
+	  later fully support this driver.
+
+comment "Parallel IDE protocol modules"
+	depends on PARIDE
+
+config PARIDE_ATEN
+	tristate "ATEN EH-100 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the ATEN EH-100 parallel port IDE
+	  protocol. This protocol is used in some inexpensive low performance
+	  parallel port kits made in Hong Kong. If you chose to build PARIDE
+	  support into your kernel, you may answer Y here to build in the
+	  protocol driver, otherwise you should answer M to build it as a
+	  loadable module. The module will be called aten. You must also
+	  have a high-level driver for the type of device that you want to
+	  support.
+
+config PARIDE_BPCK
+	tristate "MicroSolutions backpack (Series 5) protocol"
+	depends on PARIDE
+	---help---
+	  This option enables support for the Micro Solutions BACKPACK
+	  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
+	  before 1999 were Series 5) Series 5 drives will NOT always have the
+	  Series noted on the bottom of the drive. Series 6 drivers will.
+
+	  In other words, if your BACKPACK drive doesn't say "Series 6" on the
+	  bottom, enable this option.
+
+	  If you chose to build PARIDE support into your kernel, you may
+	  answer Y here to build in the protocol driver, otherwise you should
+	  answer M to build it as a loadable module.  The module will be
+	  called bpck.  You must also have a high-level driver for the type
+	  of device that you want to support.
+
+config PARIDE_BPCK6
+	tristate "MicroSolutions backpack (Series 6) protocol"
+	depends on PARIDE && !64BIT
+	---help---
+	  This option enables support for the Micro Solutions BACKPACK
+	  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
+	  after 1999 were Series 6) Series 6 drives will have the Series noted
+	  on the bottom of the drive.  Series 5 drivers don't always have it
+	  noted.
+
+	  In other words, if your BACKPACK drive says "Series 6" on the
+	  bottom, enable this option.
+
+	  If you chose to build PARIDE support into your kernel, you may
+	  answer Y here to build in the protocol driver, otherwise you should
+	  answer M to build it as a loadable module.  The module will be
+	  called bpck6.  You must also have a high-level driver for the type
+	  of device that you want to support.
+
+config PARIDE_COMM
+	tristate "DataStor Commuter protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the Commuter parallel port IDE
+	  protocol from DataStor. If you chose to build PARIDE support
+	  into your kernel, you may answer Y here to build in the protocol
+	  driver, otherwise you should answer M to build it as a loadable
+	  module. The module will be called comm. You must also have
+	  a high-level driver for the type of device that you want to support.
+
+config PARIDE_DSTR
+	tristate "DataStor EP-2000 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the EP-2000 parallel port IDE
+	  protocol from DataStor. If you chose to build PARIDE support
+	  into your kernel, you may answer Y here to build in the protocol
+	  driver, otherwise you should answer M to build it as a loadable
+	  module. The module will be called dstr. You must also have
+	  a high-level driver for the type of device that you want to support.
+
+config PARIDE_FIT2
+	tristate "FIT TD-2000 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the TD-2000 parallel port IDE
+	  protocol from Fidelity International Technology. This is a simple
+	  (low speed) adapter that is used in some portable hard drives. If
+	  you chose to build PARIDE support into your kernel, you may answer Y
+	  here to build in the protocol driver, otherwise you should answer M
+	  to build it as a loadable module. The module will be called ktti.
+	  You must also have a high-level driver for the type of device that
+	  you want to support.
+
+config PARIDE_FIT3
+	tristate "FIT TD-3000 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the TD-3000 parallel port IDE
+	  protocol from Fidelity International Technology. This protocol is
+	  used in newer models of their portable disk, CD-ROM and PD/CD
+	  devices. If you chose to build PARIDE support into your kernel, you
+	  may answer Y here to build in the protocol driver, otherwise you
+	  should answer M to build it as a loadable module. The module will be
+	  called fit3. You must also have a high-level driver for the type
+	  of device that you want to support.
+
+config PARIDE_EPAT
+	tristate "Shuttle EPAT/EPEZ protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the EPAT parallel port IDE protocol.
+	  EPAT is a parallel port IDE adapter manufactured by Shuttle
+	  Technology and widely used in devices from major vendors such as
+	  Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
+	  PARIDE support into your kernel, you may answer Y here to build in
+	  the protocol driver, otherwise you should answer M to build it as a
+	  loadable module. The module will be called epat. You must also
+	  have a high-level driver for the type of device that you want to
+	  support.
+
+config PARIDE_EPATC8
+	bool "Support c7/c8 chips (EXPERIMENTAL)"
+	depends on PARIDE_EPAT && EXPERIMENTAL
+	help
+	  This option enables support for the newer Shuttle EP1284 (aka c7 and
+	  c8) chip. You need this if you are using any recent Imation SuperDisk
+	  (LS-120) drive.
+
+config PARIDE_EPIA
+	tristate "Shuttle EPIA protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the (obsolete) EPIA parallel port
+	  IDE protocol from Shuttle Technology. This adapter can still be
+	  found in some no-name kits. If you chose to build PARIDE support
+	  into your kernel, you may answer Y here to build in the protocol
+	  driver, otherwise you should answer M to build it as a loadable
+	  module. The module will be called epia. You must also have a
+	  high-level driver for the type of device that you want to support.
+
+config PARIDE_FRIQ
+	tristate "Freecom IQ ASIC-2 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for version 2 of the Freecom IQ parallel
+	  port IDE adapter.  This adapter is used by the Maxell Superdisk
+	  drive.  If you chose to build PARIDE support into your kernel, you
+	  may answer Y here to build in the protocol driver, otherwise you
+	  should answer M to build it as a loadable module. The module will be
+	  called friq. You must also have a high-level driver for the type
+	  of device that you want to support.
+
+config PARIDE_FRPW
+	tristate "FreeCom power protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the Freecom power parallel port IDE
+	  protocol. If you chose to build PARIDE support into your kernel, you
+	  may answer Y here to build in the protocol driver, otherwise you
+	  should answer M to build it as a loadable module. The module will be
+	  called frpw. You must also have a high-level driver for the type
+	  of device that you want to support.
+
+config PARIDE_KBIC
+	tristate "KingByte KBIC-951A/971A protocols"
+	depends on PARIDE
+	help
+	  This option enables support for the KBIC-951A and KBIC-971A parallel
+	  port IDE protocols from KingByte Information Corp. KingByte's
+	  adapters appear in many no-name portable disk and CD-ROM products,
+	  especially in Europe. If you chose to build PARIDE support into your
+	  kernel, you may answer Y here to build in the protocol driver,
+	  otherwise you should answer M to build it as a loadable module. The
+	  module will be called kbic. You must also have a high-level driver
+	  for the type of device that you want to support.
+
+config PARIDE_KTTI
+	tristate "KT PHd protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the "PHd" parallel port IDE protocol
+	  from KT Technology. This is a simple (low speed) adapter that is
+	  used in some 2.5" portable hard drives. If you chose to build PARIDE
+	  support into your kernel, you may answer Y here to build in the
+	  protocol driver, otherwise you should answer M to build it as a
+	  loadable module. The module will be called ktti. You must also
+	  have a high-level driver for the type of device that you want to
+	  support.
+
+config PARIDE_ON20
+	tristate "OnSpec 90c20 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the (obsolete) 90c20 parallel port
+	  IDE protocol from OnSpec (often marketed under the ValuStore brand
+	  name). If you chose to build PARIDE support into your kernel, you
+	  may answer Y here to build in the protocol driver, otherwise you
+	  should answer M to build it as a loadable module. The module will
+	  be called on20. You must also have a high-level driver for the
+	  type of device that you want to support.
+
+config PARIDE_ON26
+	tristate "OnSpec 90c26 protocol"
+	depends on PARIDE
+	help
+	  This option enables support for the 90c26 parallel port IDE protocol
+	  from OnSpec Electronics (often marketed under the ValuStore brand
+	  name). If you chose to build PARIDE support into your kernel, you
+	  may answer Y here to build in the protocol driver, otherwise you
+	  should answer M to build it as a loadable module. The module will be
+	  called on26. You must also have a high-level driver for the type
+	  of device that you want to support.
+
+#
diff --git a/drivers/block/paride/Makefile b/drivers/block/paride/Makefile
new file mode 100644
index 00000000..a539e004
--- /dev/null
+++ b/drivers/block/paride/Makefile
@@ -0,0 +1,28 @@
+#
+# Makefile for Parallel port IDE device drivers.
+#
+# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+obj-$(CONFIG_PARIDE)		+= paride.o
+obj-$(CONFIG_PARIDE_ATEN)	+= aten.o
+obj-$(CONFIG_PARIDE_BPCK)	+= bpck.o
+obj-$(CONFIG_PARIDE_COMM)	+= comm.o
+obj-$(CONFIG_PARIDE_DSTR)	+= dstr.o
+obj-$(CONFIG_PARIDE_KBIC)	+= kbic.o
+obj-$(CONFIG_PARIDE_EPAT)	+= epat.o
+obj-$(CONFIG_PARIDE_EPIA)	+= epia.o
+obj-$(CONFIG_PARIDE_FRPW)	+= frpw.o
+obj-$(CONFIG_PARIDE_FRIQ)	+= friq.o
+obj-$(CONFIG_PARIDE_FIT2)	+= fit2.o
+obj-$(CONFIG_PARIDE_FIT3)	+= fit3.o
+obj-$(CONFIG_PARIDE_ON20)	+= on20.o
+obj-$(CONFIG_PARIDE_ON26)	+= on26.o
+obj-$(CONFIG_PARIDE_KTTI)	+= ktti.o
+obj-$(CONFIG_PARIDE_BPCK6)	+= bpck6.o
+obj-$(CONFIG_PARIDE_PD)		+= pd.o
+obj-$(CONFIG_PARIDE_PCD)	+= pcd.o
+obj-$(CONFIG_PARIDE_PF)		+= pf.o
+obj-$(CONFIG_PARIDE_PT)		+= pt.o
+obj-$(CONFIG_PARIDE_PG)		+= pg.o
diff --git a/drivers/block/paride/Transition-notes b/drivers/block/paride/Transition-notes
new file mode 100644
index 00000000..70374907
--- /dev/null
+++ b/drivers/block/paride/Transition-notes
@@ -0,0 +1,128 @@
+Lemma 1:
+	If ps_tq is scheduled, ps_tq_active is 1.  ps_tq_int() can be called
+	only when ps_tq_active is 1.
+Proof:	All assignments to ps_tq_active and all scheduling of ps_tq happen
+	under ps_spinlock.  There are three places where that can happen:
+	one in ps_set_intr() (A) and two in ps_tq_int() (B and C).
+	Consider the sequnce of these events.  A can not be preceded by
+	anything except B, since it is under if (!ps_tq_active) under
+	ps_spinlock.  C is always preceded by B, since we can't reach it
+	other than through B and we don't drop ps_spinlock between them.
+	IOW, the sequence is A?(BA|BC|B)*.  OTOH, number of B can not exceed
+	the sum of numbers of A and C, since each call of ps_tq_int() is
+	the result of ps_tq execution.  Therefore, the sequence starts with
+	A and each B is preceded by either A or C.  Moments when we enter
+	ps_tq_int() are sandwiched between {A,C} and B in that sequence,
+	since at any time number of B can not exceed the number of these
+	moments which, in turn, can not exceed the number of A and C.
+	In other words, the sequence of events is (A or C set ps_tq_active to
+	1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered,
+	B resets ps_tq_active)*.
+
+
+consider the following area:
+	* in do_pd_request1(): to calls of pi_do_claimed() and return in
+	  case when pd_req is NULL.
+	* in next_request(): to call of do_pd_request1()
+	* in do_pd_read(): to call of ps_set_intr()
+	* in do_pd_read_start(): to calls of pi_do_claimed(), next_request()
+and ps_set_intr()
+	* in do_pd_read_drq(): to calls of pi_do_claimed() and next_request()
+	* in do_pd_write(): to call of ps_set_intr()
+	* in do_pd_write_start(): to calls of pi_do_claimed(), next_request()
+and ps_set_intr()
+	* in do_pd_write_done(): to calls of pi_do_claimed() and next_request()
+	* in ps_set_intr(): to check for ps_tq_active and to scheduling
+	  ps_tq if ps_tq_active was 0.
+	* in ps_tq_int(): from the moment when we get ps_spinlock() to the
+	  return, call of con() or scheduling ps_tq.
+	* in pi_schedule_claimed() when called from pi_do_claimed() called from
+	  pd.c, everything until returning 1 or setting or setting ->claim_cont
+	  on the path that returns 0
+	* in pi_do_claimed() when called from pd.c, everything until the call
+	  of pi_do_claimed() plus the everything until the call of cont() if
+	  pi_do_claimed() has returned 1.
+	* in pi_wake_up() called for PIA that belongs to pd.c, everything from
+	  the moment when pi_spinlock has been acquired.
+
+Lemma 2:
+	1) at any time at most one thread of execution can be in that area or
+	be preempted there.
+	2) When there is such a thread, pd_busy is set or pd_lock is held by
+	that thread.
+	3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is
+	held by that thread.
+	4) When there is such a thread, all PIA belonging to pd.c have NULL
+	->claim_cont or pi_spinlock is held by thread in question.
+
+Proof:	consider the first moment when the above is not true.
+
+(1) can become not true if some thread enters that area while another is there.
+	a) do_pd_request1() can be called from next_request() or do_pd_request()
+	   In the first case the thread was already in the area.  In the second,
+	   the thread was holding pd_lock and found pd_busy not set, which would
+	   mean that (2) was already not true.
+	b) ps_set_intr() and pi_schedule_claimed() can be called only from the
+	   area.
+	c) pi_do_claimed() is called by pd.c only from the area.
+	d) ps_tq_int() can enter the area only when the thread is holding
+	   ps_spinlock and ps_tq_active is 1 (due to Lemma 1).  It means that
+	   (3) was already not true.
+	e) do_pd_{read,write}* could be called only from the area.  The only
+	   case that needs consideration is call from pi_wake_up() and there
+	   we would have to be called for the PIA that got ->claimed_cont
+	   from pd.c.  That could happen only if pi_do_claimed() had been
+	   called from pd.c for that PIA, which happens only for PIA belonging
+	   to pd.c.
+	f) pi_wake_up() can enter the area only when the thread is holding
+	   pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to
+	   pd.c.  It means that (4) was already not true.
+
+(2) can become not true only when pd_lock is released by the thread in question.
+	Indeed, pd_busy is reset only in the area and thread that resets
+	it is holding pd_lock.	The only place within the area where we
+	release pd_lock is in pd_next_buf() (called from within the area).
+	But that code does not reset pd_busy, so pd_busy would have to be
+	0 when pd_next_buf() had acquired pd_lock.  If it become 0 while
+	we were acquiring the lock, (1) would be already false, since
+	the thread that had reset it would be in the area simulateously.
+	If it was 0 before we tried to acquire pd_lock, (2) would be
+	already false.
+
+For similar reasons, (3) can become not true only when ps_spinlock is released
+by the thread in question.  However, all such places within the area are right
+after resetting ps_tq_active to 0.
+
+(4) is done the same way - all places where we release pi_spinlock within
+the area are either after resetting ->claimed_cont to NULL while holding
+pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock
+also in the area.  The only place where ->claimed_cont is made non-NULL is
+in the area, under pi_spinlock and we do not release it until after leaving
+the area.
+
+QED.
+
+
+Corollary 1: ps_tq_active can be killed.  Indeed, the only place where we
+check its value is in ps_set_intr() and if it had been non-zero at that
+point, we would have violated either (2.1) (if it was set while ps_set_intr()
+was acquiring ps_spinlock) or (2.3) (if it was set when we started to
+acquire ps_spinlock).
+
+Corollary 2: ps_spinlock can be killed.  Indeed, Lemma 1 and Lemma 2 show
+that the only possible contention is between scheduling ps_tq followed by
+immediate release of spinlock and beginning of execution of ps_tq on
+another CPU.
+
+Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start()
+can be killed.  Indeed, we are not holding pd_lock and thus pd_busy is already
+1 here.
+
+Corollary 4: in ps_tq_int() uses of con can be replaced with uses of
+ps_continuation, since the latter is changed only from the area.
+We don't need to reset it to NULL, since we are guaranteed that there
+will be a call of ps_set_intr() before we look at ps_continuation again.
+We can remove the check for ps_continuation being NULL for the same
+reason - the value is guaranteed to be set by the last ps_set_intr() and
+we never pass it NULL.  Assignements in the beginning of ps_set_intr()
+can be taken to callers as long as they remain within the area.
diff --git a/drivers/block/paride/aten.c b/drivers/block/paride/aten.c
new file mode 100644
index 00000000..26954655
--- /dev/null
+++ b/drivers/block/paride/aten.c
@@ -0,0 +1,162 @@
+/* 
+        aten.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                            Under the terms of the GNU General Public License.
+
+	aten.c is a low-level protocol driver for the ATEN EH-100
+	parallel port adapter.  The EH-100 supports 4-bit and 8-bit
+        modes only.  There is also an EH-132 which supports EPP mode
+        transfers.  The EH-132 is not yet supported.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.05	init_proto, release_proto
+
+*/
+
+#define ATEN_VERSION      "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x08, 0x20 };
+
+static void  aten_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	int r;
+
+	r = regr + cont_map[cont] + 0x80;
+
+	w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
+}
+
+static int aten_read_regr( PIA *pi, int cont, int regr )
+
+{	int  a, b, r;
+
+        r = regr + cont_map[cont] + 0x40;
+
+	switch (pi->mode) {
+
+        case 0: w0(r); w2(0xe); w2(6); 
+		w2(7); w2(6); w2(0);
+		a = r1(); w0(0x10); b = r1(); w2(0xc);
+		return j44(a,b);
+
+        case 1: r |= 0x10;
+		w0(r); w2(0xe); w2(6); w0(0xff); 
+		w2(0x27); w2(0x26); w2(0x20);
+		a = r0();
+		w2(0x26); w2(0xc);
+		return a;
+	}
+	return -1;
+}
+
+static void aten_read_block( PIA *pi, char * buf, int count )
+
+{	int  k, a, b, c, d;
+
+	switch (pi->mode) {
+
+	case 0:	w0(0x48); w2(0xe); w2(6);
+		for (k=0;k<count/2;k++) {
+			w2(7); w2(6); w2(2);
+			a = r1(); w0(0x58); b = r1();
+			w2(0); d = r1(); w0(0x48); c = r1();
+			buf[2*k] = j44(c,d);
+			buf[2*k+1] = j44(a,b);
+		}
+		w2(0xc);
+		break;
+
+	case 1: w0(0x58); w2(0xe); w2(6);
+		for (k=0;k<count/2;k++) {
+			w2(0x27); w2(0x26); w2(0x22);
+			a = r0(); w2(0x20); b = r0();
+			buf[2*k] = b; buf[2*k+1] = a;
+		}
+		w2(0x26); w2(0xc);
+		break;
+	}
+}
+
+static void aten_write_block( PIA *pi, char * buf, int count )
+
+{	int k;
+
+	w0(0x88); w2(0xe); w2(6);
+	for (k=0;k<count/2;k++) {
+		w0(buf[2*k+1]); w2(0xe); w2(6);
+		w0(buf[2*k]); w2(7); w2(6);
+	}
+	w2(0xc);
+}
+
+static void aten_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(0xc);	
+}
+
+static void aten_disconnect ( PIA *pi )
+
+{       w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void aten_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[2] = {"4-bit","8-bit"};
+
+        printk("%s: aten %s, ATEN EH-100 at 0x%x, ",
+                pi->device,ATEN_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol aten = {
+	.owner		= THIS_MODULE,
+	.name		= "aten",
+	.max_mode	= 2,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= aten_write_regr,
+	.read_regr	= aten_read_regr,
+	.write_block	= aten_write_block,
+	.read_block	= aten_read_block,
+	.connect	= aten_connect,
+	.disconnect	= aten_disconnect,
+	.log_adapter	= aten_log_adapter,
+};
+
+static int __init aten_init(void)
+{
+	return paride_register(&aten);
+}
+
+static void __exit aten_exit(void)
+{
+	paride_unregister( &aten );
+}
+
+MODULE_LICENSE("GPL");
+module_init(aten_init)
+module_exit(aten_exit)
diff --git a/drivers/block/paride/bpck.c b/drivers/block/paride/bpck.c
new file mode 100644
index 00000000..4f27e739
--- /dev/null
+++ b/drivers/block/paride/bpck.c
@@ -0,0 +1,477 @@
+/* 
+	bpck.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
+		            Under the terms of the GNU General Public License.
+
+	bpck.c is a low-level protocol driver for the MicroSolutions 
+	"backpack" parallel port IDE adapter.  
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.05 init_proto, release_proto, pi->delay 
+	1.02    GRG 1998.08.15 default pi->delay returned to 4
+
+*/
+
+#define	BPCK_VERSION	"1.02" 
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#undef r2
+#undef w2
+
+#define PC			pi->private
+#define r2()			(PC=(in_p(2) & 0xff))
+#define w2(byte)  		{out_p(2,byte); PC = byte;}
+#define t2(pat)   		{PC ^= pat; out_p(2,PC);}
+#define e2()			{PC &= 0xfe; out_p(2,PC);}
+#define o2()			{PC |= 1; out_p(2,PC);}
+
+#define j44(l,h)     (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+   cont = 2 - use internal bpck register addressing
+*/
+
+static int  cont_map[3] = { 0x40, 0x48, 0 };
+
+static int bpck_read_regr( PIA *pi, int cont, int regr )
+
+{       int r, l, h;
+
+	r = regr + cont_map[cont];
+
+	switch (pi->mode) {
+
+	case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
+	        l = r1();
+        	t2(4);
+        	h = r1();
+        	return j44(l,h);
+
+	case 1: w0(r & 0xf); w0(r); t2(2);
+	        e2(); t2(0x20);
+		t2(4); h = r0();
+	        t2(1); t2(0x20);
+	        return h;
+
+	case 2:
+	case 3:
+	case 4: w0(r); w2(9); w2(0); w2(0x20);
+		h = r4();
+		w2(0);
+		return h;
+
+	}
+	return -1;
+}	
+
+static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
+
+{	int	r;
+
+        r = regr + cont_map[cont];
+
+	switch (pi->mode) {
+
+	case 0:
+	case 1: w0(r);
+		t2(2);
+		w0(val);
+		o2(); t2(4); t2(1);
+		break;
+
+	case 2:
+	case 3:
+	case 4: w0(r); w2(9); w2(0);
+		w0(val); w2(1); w2(3); w2(0);
+		break;
+
+	}
+}
+
+/* These macros access the bpck registers in native addressing */
+
+#define WR(r,v)		bpck_write_regr(pi,2,r,v)
+#define RR(r)		(bpck_read_regr(pi,2,r))
+
+static void bpck_write_block( PIA *pi, char * buf, int count )
+
+{	int i;
+
+	switch (pi->mode) {
+
+	case 0: WR(4,0x40);
+		w0(0x40); t2(2); t2(1);
+		for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
+		WR(4,0);
+		break;
+
+	case 1: WR(4,0x50);
+                w0(0x40); t2(2); t2(1);
+                for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
+                WR(4,0x10);
+		break;
+
+	case 2: WR(4,0x48);
+		w0(0x40); w2(9); w2(0); w2(1);
+		for (i=0;i<count;i++) w4(buf[i]);
+		w2(0);
+		WR(4,8);
+		break;
+
+        case 3: WR(4,0x48);
+                w0(0x40); w2(9); w2(0); w2(1);
+                for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
+                w2(0);
+                WR(4,8);
+                break;
+ 
+        case 4: WR(4,0x48);
+                w0(0x40); w2(9); w2(0); w2(1);
+                for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
+                w2(0);
+                WR(4,8);
+                break;
+ 	}
+}
+
+static void bpck_read_block( PIA *pi, char * buf, int count )
+
+{	int i, l, h;
+
+	switch (pi->mode) {
+
+      	case 0: WR(4,0x40);
+		w0(0x40); t2(2);
+		for (i=0;i<count;i++) {
+		    t2(4); l = r1();
+		    t2(4); h = r1();
+		    buf[i] = j44(l,h);
+		}
+		WR(4,0);
+		break;
+
+	case 1: WR(4,0x50);
+		w0(0x40); t2(2); t2(0x20);
+      	        for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
+	        t2(1); t2(0x20);
+	        WR(4,0x10);
+		break;
+
+	case 2: WR(4,0x48);
+		w0(0x40); w2(9); w2(0); w2(0x20);
+		for (i=0;i<count;i++) buf[i] = r4();
+		w2(0);
+		WR(4,8);
+		break;
+
+        case 3: WR(4,0x48);
+                w0(0x40); w2(9); w2(0); w2(0x20);
+                for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
+                w2(0);
+                WR(4,8);
+                break;
+
+        case 4: WR(4,0x48);
+                w0(0x40); w2(9); w2(0); w2(0x20);
+                for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
+                w2(0);
+                WR(4,8);
+                break;
+
+	}
+}
+
+static int bpck_probe_unit ( PIA *pi )
+
+{	int o1, o0, f7, id;
+	int t, s;
+
+	id = pi->unit;
+	s = 0;
+	w2(4); w2(0xe); r2(); t2(2); 
+	o1 = r1()&0xf8;
+	o0 = r0();
+	w0(255-id); w2(4); w0(id);
+	t2(8); t2(8); t2(8);
+	t2(2); t = r1()&0xf8;
+	f7 = ((id % 8) == 7);
+	if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
+	if ((t == o1) && ((!f7) || (s == o1)))  {
+		w2(0x4c); w0(o0);
+		return 0;	
+	}
+	t2(8); w0(0); t2(2); w2(0x4c); w0(o0);
+	return 1;
+}
+	
+static void bpck_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+	w0(0xff-pi->unit); w2(4); w0(pi->unit);
+	t2(8); t2(8); t2(8); 
+	t2(2); t2(2);
+	
+	switch (pi->mode) {
+
+	case 0: t2(8); WR(4,0);
+		break;
+
+	case 1: t2(8); WR(4,0x10);
+		break;
+
+	case 2:
+        case 3:
+	case 4: w2(0); WR(4,8);
+		break;
+
+	}
+
+	WR(5,8);
+
+	if (pi->devtype == PI_PCD) {
+		WR(0x46,0x10);		/* fiddle with ESS logic ??? */
+		WR(0x4c,0x38);
+		WR(0x4d,0x88);
+		WR(0x46,0xa0);
+		WR(0x41,0);
+		WR(0x4e,8);
+		}
+}
+
+static void bpck_disconnect ( PIA *pi )
+
+{	w0(0); 
+	if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
+	w2(0x4c); w0(pi->saved_r0);
+} 
+
+static void bpck_force_spp ( PIA *pi )
+
+/* This fakes the EPP protocol to turn off EPP ... */
+
+{       pi->saved_r0 = r0();
+        w0(0xff-pi->unit); w2(4); w0(pi->unit);
+        t2(8); t2(8); t2(8); 
+        t2(2); t2(2);
+
+        w2(0); 
+        w0(4); w2(9); w2(0); 
+        w0(0); w2(1); w2(3); w2(0);     
+        w0(0); w2(9); w2(0);
+        w2(0x4c); w0(pi->saved_r0);
+}
+
+#define TEST_LEN  16
+
+static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
+
+{	int i, e, l, h, om;
+	char buf[TEST_LEN];
+
+	bpck_force_spp(pi);
+
+	switch (pi->mode) {
+
+	case 0: bpck_connect(pi);
+		WR(0x13,0x7f);
+		w0(0x13); t2(2);
+		for(i=0;i<TEST_LEN;i++) {
+                    t2(4); l = r1();
+                    t2(4); h = r1();
+                    buf[i] = j44(l,h);
+		}
+		bpck_disconnect(pi);
+		break;
+
+        case 1: bpck_connect(pi);
+		WR(0x13,0x7f);
+                w0(0x13); t2(2); t2(0x20);
+                for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
+                t2(1); t2(0x20);
+		bpck_disconnect(pi);
+		break;
+
+	case 2:
+	case 3:
+	case 4: om = pi->mode;
+		pi->mode = 0;
+		bpck_connect(pi);
+		WR(7,3);
+		WR(4,8);
+		bpck_disconnect(pi);
+
+		pi->mode = om;
+		bpck_connect(pi);
+		w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
+
+		switch (pi->mode) {
+		  case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
+			  break;
+		  case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
+                          break;
+		  case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
+                          break;
+		}
+
+		w2(0);
+		WR(7,0);
+		bpck_disconnect(pi);
+
+		break;
+
+	}
+
+	if (verbose) {
+	    printk("%s: bpck: 0x%x unit %d mode %d: ",
+		   pi->device,pi->port,pi->unit,pi->mode);
+	    for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
+	    printk("\n");
+	}
+
+	e = 0;
+	for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
+	return e;
+}
+
+static void bpck_read_eeprom ( PIA *pi, char * buf )
+
+{       int i,j,k,n,p,v,f, om, od;
+
+	bpck_force_spp(pi);
+
+	om = pi->mode;  od = pi->delay;
+	pi->mode = 0; pi->delay = 6;
+
+	bpck_connect(pi);
+	
+	n = 0;
+	WR(4,0);
+	for (i=0;i<64;i++) {
+	    WR(6,8);  
+	    WR(6,0xc);
+	    p = 0x100;
+	    for (k=0;k<9;k++) {
+		f = (((i + 0x180) & p) != 0) * 2;
+		WR(6,f+0xc); 
+		WR(6,f+0xd); 
+		WR(6,f+0xc);
+		p = (p >> 1);
+	    }
+	    for (j=0;j<2;j++) {
+		v = 0;
+		for (k=0;k<8;k++) {
+		    WR(6,0xc); 
+		    WR(6,0xd); 
+		    WR(6,0xc); 
+		    f = RR(0);
+		    v = 2*v + (f == 0x84);
+		}
+		buf[2*i+1-j] = v;
+	    }
+	}
+	WR(6,8);
+	WR(6,0);
+	WR(5,8);
+
+	bpck_disconnect(pi);
+
+        if (om >= 2) {
+                bpck_connect(pi);
+                WR(7,3);
+                WR(4,8);
+                bpck_disconnect(pi);
+        }
+
+	pi->mode = om; pi->delay = od;
+}
+
+static int bpck_test_port ( PIA *pi ) 	/* check for 8-bit port */
+
+{	int	i, r, m;
+
+	w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
+	m = -1;
+	if (r == i) m = 2;
+	if (r == (255-i)) m = 0;
+
+	w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
+	if (r != (255-i)) m = -1;
+	
+	if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
+	if (m == 2) { w2(0x26); w2(0xc); }
+
+	if (m == -1) return 0;
+	return 5;
+}
+
+static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{	char	*mode_string[5] = { "4-bit","8-bit","EPP-8",
+				    "EPP-16","EPP-32" };
+
+#ifdef DUMP_EEPROM
+	int i;
+#endif
+
+	bpck_read_eeprom(pi,scratch);
+
+#ifdef DUMP_EEPROM
+	if (verbose) {
+	   for(i=0;i<128;i++)
+		if ((scratch[i] < ' ') || (scratch[i] > '~'))
+		    scratch[i] = '.';
+	   printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
+	   printk("%s:              %64.64s\n",pi->device,&scratch[64]);
+	}
+#endif
+
+	printk("%s: bpck %s, backpack %8.8s unit %d",
+		pi->device,BPCK_VERSION,&scratch[110],pi->unit);
+	printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
+		pi->mode,mode_string[pi->mode],pi->delay);
+}
+
+static struct pi_protocol bpck = {
+	.owner		= THIS_MODULE,
+	.name		= "bpck",
+	.max_mode	= 5,
+	.epp_first	= 2,
+	.default_delay	= 4,
+	.max_units	= 255,
+	.write_regr	= bpck_write_regr,
+	.read_regr	= bpck_read_regr,
+	.write_block	= bpck_write_block,
+	.read_block	= bpck_read_block,
+	.connect	= bpck_connect,
+	.disconnect	= bpck_disconnect,
+	.test_port	= bpck_test_port,
+	.probe_unit	= bpck_probe_unit,
+	.test_proto	= bpck_test_proto,
+	.log_adapter	= bpck_log_adapter,
+};
+
+static int __init bpck_init(void)
+{
+	return paride_register(&bpck);
+}
+
+static void __exit bpck_exit(void)
+{
+	paride_unregister(&bpck);
+}
+
+MODULE_LICENSE("GPL");
+module_init(bpck_init)
+module_exit(bpck_exit)
diff --git a/drivers/block/paride/bpck6.c b/drivers/block/paride/bpck6.c
new file mode 100644
index 00000000..ec64e7f5
--- /dev/null
+++ b/drivers/block/paride/bpck6.c
@@ -0,0 +1,267 @@
+/*
+	backpack.c (c) 2001 Micro Solutions Inc.
+		Released under the terms of the GNU General Public license
+
+	backpack.c is a low-level protocol driver for the Micro Solutions
+		"BACKPACK" parallel port IDE adapter
+		(Works on Series 6 drives)
+
+	Written by: Ken Hahn     (linux-dev@micro-solutions.com)
+	            Clive Turvey (linux-dev@micro-solutions.com)
+
+*/
+
+/*
+   This is Ken's linux wrapper for the PPC library
+   Version 1.0.0 is the backpack driver for which source is not available
+   Version 2.0.0 is the first to have source released 
+   Version 2.0.1 is the "Cox-ified" source code 
+   Version 2.0.2 - fixed version string usage, and made ppc functions static 
+*/
+
+
+#define BACKPACK_VERSION "2.0.2"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <linux/parport.h>
+
+#include "ppc6lnx.c"
+#include "paride.h"
+
+/* PARAMETERS */
+static bool verbose; /* set this to 1 to see debugging messages and whatnot */
+ 
+
+#define PPCSTRUCT(pi) ((Interface *)(pi->private))
+
+/****************************************************************/
+/*
+ ATAPI CDROM DRIVE REGISTERS
+*/
+#define ATAPI_DATA       0      /* data port                  */
+#define ATAPI_ERROR      1      /* error register (read)      */
+#define ATAPI_FEATURES   1      /* feature register (write)   */
+#define ATAPI_INT_REASON 2      /* interrupt reason register  */
+#define ATAPI_COUNT_LOW  4      /* byte count register (low)  */
+#define ATAPI_COUNT_HIGH 5      /* byte count register (high) */
+#define ATAPI_DRIVE_SEL  6      /* drive select register      */
+#define ATAPI_STATUS     7      /* status port (read)         */
+#define ATAPI_COMMAND    7      /* command port (write)       */
+#define ATAPI_ALT_STATUS 0x0e /* alternate status reg (read) */
+#define ATAPI_DEVICE_CONTROL 0x0e /* device control (write)   */
+/****************************************************************/
+
+static int bpck6_read_regr(PIA *pi, int cont, int reg)
+{
+	unsigned int out;
+
+	/* check for bad settings */
+	if (reg<0 || reg>7 || cont<0 || cont>2)
+	{
+		return(-1);
+	}
+	out=ppc6_rd_port(PPCSTRUCT(pi),cont?reg|8:reg);
+	return(out);
+}
+
+static void bpck6_write_regr(PIA *pi, int cont, int reg, int val)
+{
+	/* check for bad settings */
+	if (reg>=0 && reg<=7 && cont>=0 && cont<=1)
+	{
+		ppc6_wr_port(PPCSTRUCT(pi),cont?reg|8:reg,(u8)val);
+	}
+}
+
+static void bpck6_write_block( PIA *pi, char * buf, int len )
+{
+	ppc6_wr_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1); 
+}
+
+static void bpck6_read_block( PIA *pi, char * buf, int len )
+{
+	ppc6_rd_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
+}
+
+static void bpck6_connect ( PIA *pi  )
+{
+	if(verbose)
+	{
+		printk(KERN_DEBUG "connect\n");
+	}
+
+	if(pi->mode >=2)
+  	{
+		PPCSTRUCT(pi)->mode=4+pi->mode-2;	
+	}
+	else if(pi->mode==1)
+	{
+		PPCSTRUCT(pi)->mode=3;	
+	}
+	else
+	{
+		PPCSTRUCT(pi)->mode=1;		
+	}
+
+	ppc6_open(PPCSTRUCT(pi));  
+	ppc6_wr_extout(PPCSTRUCT(pi),0x3);
+}
+
+static void bpck6_disconnect ( PIA *pi )
+{
+	if(verbose)
+	{
+		printk("disconnect\n");
+	}
+	ppc6_wr_extout(PPCSTRUCT(pi),0x0);
+	ppc6_close(PPCSTRUCT(pi));
+}
+
+static int bpck6_test_port ( PIA *pi )   /* check for 8-bit port */
+{
+	if(verbose)
+	{
+		printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n",
+               		((struct pardevice*)(pi->pardev))->port->modes,
+			((struct pardevice *)(pi->pardev))->port->base); 
+	}
+
+	/*copy over duplicate stuff.. initialize state info*/
+	PPCSTRUCT(pi)->ppc_id=pi->unit;
+	PPCSTRUCT(pi)->lpt_addr=pi->port;
+
+	/* look at the parport device to see if what modes we can use */
+	if(((struct pardevice *)(pi->pardev))->port->modes & 
+		(PARPORT_MODE_EPP)
+          )
+	{
+		return 5; /* Can do EPP*/
+	}
+	else if(((struct pardevice *)(pi->pardev))->port->modes & 
+			(PARPORT_MODE_TRISTATE)
+               )
+	{
+		return 2;
+	}
+	else /*Just flat SPP*/
+	{
+		return 1;
+	}
+}
+
+static int bpck6_probe_unit ( PIA *pi )
+{
+	int out;
+
+	if(verbose)
+	{
+		printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port);
+	}
+
+	/*SET PPC UNIT NUMBER*/
+	PPCSTRUCT(pi)->ppc_id=pi->unit;
+
+	/*LOWER DOWN TO UNIDIRECTIONAL*/
+	PPCSTRUCT(pi)->mode=1;		
+
+	out=ppc6_open(PPCSTRUCT(pi));
+
+	if(verbose)
+	{
+		printk(KERN_DEBUG "ppc_open returned %2x\n",out);
+	}
+
+  	if(out)
+ 	{
+		ppc6_close(PPCSTRUCT(pi));
+		if(verbose)
+		{
+			printk(KERN_DEBUG "leaving probe\n");
+		}
+               return(1);
+	}
+  	else
+  	{
+		if(verbose)
+		{
+			printk(KERN_DEBUG "Failed open\n");
+		}
+    		return(0);
+  	}
+}
+
+static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
+{
+	char *mode_string[5]=
+		{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+
+	printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device);
+	printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device);
+	printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
+		pi->device,BACKPACK_VERSION,pi->port);
+	printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device,
+		pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
+}
+
+static int bpck6_init_proto(PIA *pi)
+{
+	Interface *p = kzalloc(sizeof(Interface), GFP_KERNEL);
+
+	if (p) {
+		pi->private = (unsigned long)p;
+		return 0;
+	}
+
+	printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device); 
+	return -1;
+}
+
+static void bpck6_release_proto(PIA *pi)
+{
+	kfree((void *)(pi->private)); 
+}
+
+static struct pi_protocol bpck6 = {
+	.owner		= THIS_MODULE,
+	.name		= "bpck6",
+	.max_mode	= 5,
+	.epp_first	= 2, /* 2-5 use epp (need 8 ports) */
+	.max_units	= 255,
+	.write_regr	= bpck6_write_regr,
+	.read_regr	= bpck6_read_regr,
+	.write_block	= bpck6_write_block,
+	.read_block	= bpck6_read_block,
+	.connect	= bpck6_connect,
+	.disconnect	= bpck6_disconnect,
+	.test_port	= bpck6_test_port,
+	.probe_unit	= bpck6_probe_unit,
+	.log_adapter	= bpck6_log_adapter,
+	.init_proto	= bpck6_init_proto,
+	.release_proto	= bpck6_release_proto,
+};
+
+static int __init bpck6_init(void)
+{
+	printk(KERN_INFO "bpck6: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n");
+	printk(KERN_INFO "bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA\n");
+	if(verbose)
+		printk(KERN_DEBUG "bpck6: verbose debug enabled.\n");
+	return paride_register(&bpck6);
+}
+
+static void __exit bpck6_exit(void)
+{
+	paride_unregister(&bpck6);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Micro Solutions Inc.");
+MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
+module_param(verbose, bool, 0644);
+module_init(bpck6_init)
+module_exit(bpck6_exit)
diff --git a/drivers/block/paride/comm.c b/drivers/block/paride/comm.c
new file mode 100644
index 00000000..9bcd3549
--- /dev/null
+++ b/drivers/block/paride/comm.c
@@ -0,0 +1,218 @@
+/* 
+        comm.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+	comm.c is a low-level protocol driver for some older models
+	of the DataStor "Commuter" parallel to IDE adapter.  Some of
+	the parallel port devices marketed by Arista currently
+	use this adapter.
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.05  init_proto, release_proto
+
+*/
+
+#define COMM_VERSION      "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes:  0  nybble reads, 8-bit writes
+                1  8-bit reads and writes
+                2  8-bit EPP mode
+*/
+
+#define j44(a,b)	(((a>>3)&0x0f)|((b<<1)&0xf0))
+
+#define P1	w2(5);w2(0xd);w2(0xd);w2(5);w2(4);
+#define P2	w2(5);w2(7);w2(7);w2(5);w2(4);
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x08, 0x10 };
+
+static int comm_read_regr( PIA *pi, int cont, int regr )
+
+{       int     l, h, r;
+
+        r = regr + cont_map[cont];
+
+        switch (pi->mode)  {
+
+        case 0: w0(r); P1; w0(0);
+        	w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
+                return j44(l,h);
+
+        case 1: w0(r+0x20); P1; 
+        	w0(0); w2(0x26); h = r0(); w2(4);
+                return h;
+
+	case 2:
+	case 3:
+        case 4: w3(r+0x20); (void)r1();
+        	w2(0x24); h = r4(); w2(4);
+                return h;
+
+        }
+        return -1;
+}       
+
+static void comm_write_regr( PIA *pi, int cont, int regr, int val )
+
+{       int  r;
+
+        r = regr + cont_map[cont];
+
+        switch (pi->mode)  {
+
+        case 0:
+        case 1: w0(r); P1; w0(val); P2;
+		break;
+
+	case 2:
+	case 3:
+        case 4: w3(r); (void)r1(); w4(val);
+                break;
+        }
+}
+
+static void comm_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+        w2(4); w0(0xff); w2(6);
+        w2(4); w0(0xaa); w2(6);
+        w2(4); w0(0x00); w2(6);
+        w2(4); w0(0x87); w2(6);
+        w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
+}
+
+static void comm_disconnect ( PIA *pi )
+
+{       w2(0); w2(0); w2(0); w2(4); 
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void comm_read_block( PIA *pi, char * buf, int count )
+
+{       int     i, l, h;
+
+        switch (pi->mode) {
+        
+        case 0: w0(0x48); P1;
+                for(i=0;i<count;i++) {
+                        w0(0); w2(6); l = r1();
+                        w0(0x80); h = r1(); w2(4);
+                        buf[i] = j44(l,h);
+                }
+                break;
+
+        case 1: w0(0x68); P1; w0(0);
+                for(i=0;i<count;i++) {
+                        w2(0x26); buf[i] = r0(); w2(0x24);
+                }
+		w2(4);
+		break;
+		
+	case 2: w3(0x68); (void)r1(); w2(0x24);
+		for (i=0;i<count;i++) buf[i] = r4();
+		w2(4);
+		break;
+
+        case 3: w3(0x68); (void)r1(); w2(0x24);
+                for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
+                w2(4);
+                break;
+
+        case 4: w3(0x68); (void)r1(); w2(0x24);
+                for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
+                w2(4);
+                break;
+		
+	}
+}
+
+/* NB: Watch out for the byte swapped writes ! */
+
+static void comm_write_block( PIA *pi, char * buf, int count )
+
+{       int	k;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1: w0(0x68); P1;
+        	for (k=0;k<count;k++) {
+                        w2(5); w0(buf[k^1]); w2(7);
+                }
+                w2(5); w2(4);
+                break;
+
+        case 2: w3(0x48); (void)r1();
+                for (k=0;k<count;k++) w4(buf[k^1]);
+                break;
+
+        case 3: w3(0x48); (void)r1();
+                for (k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+                break;
+
+        case 4: w3(0x48); (void)r1();
+                for (k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+                break;
+
+
+        }
+}
+
+static void comm_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+
+        printk("%s: comm %s, DataStor Commuter at 0x%x, ",
+                pi->device,COMM_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol comm = {
+	.owner		= THIS_MODULE,
+	.name		= "comm",
+	.max_mode	= 5,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= comm_write_regr,
+	.read_regr	= comm_read_regr,
+	.write_block	= comm_write_block,
+	.read_block	= comm_read_block,
+	.connect	= comm_connect,
+	.disconnect	= comm_disconnect,
+	.log_adapter	= comm_log_adapter,
+};
+
+static int __init comm_init(void)
+{
+	return paride_register(&comm);
+}
+
+static void __exit comm_exit(void)
+{
+	paride_unregister(&comm);
+}
+
+MODULE_LICENSE("GPL");
+module_init(comm_init)
+module_exit(comm_exit)
diff --git a/drivers/block/paride/dstr.c b/drivers/block/paride/dstr.c
new file mode 100644
index 00000000..accc5c77
--- /dev/null
+++ b/drivers/block/paride/dstr.c
@@ -0,0 +1,233 @@
+/* 
+        dstr.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+        dstr.c is a low-level protocol driver for the 
+        DataStor EP2000 parallel to IDE adapter chip.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define DSTR_VERSION      "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes:  0  nybble reads, 8-bit writes
+                1  8-bit reads and writes
+                2  8-bit EPP mode
+		3  EPP-16
+		4  EPP-32
+*/
+
+#define j44(a,b)  (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
+
+#define P1	w2(5);w2(0xd);w2(5);w2(4);
+#define P2	w2(5);w2(7);w2(5);w2(4);
+#define P3      w2(6);w2(4);w2(6);w2(4);
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x20, 0x40 };
+
+static int dstr_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, r;
+
+        r = regr + cont_map[cont];
+
+	w0(0x81); P1;
+	if (pi->mode) { w0(0x11); } else { w0(1); }
+	P2; w0(r); P1;
+
+        switch (pi->mode)  {
+
+        case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
+                return j44(a,b);
+
+        case 1: w0(0); w2(0x26); a = r0(); w2(4);
+                return a;
+
+	case 2:
+	case 3:
+        case 4: w2(0x24); a = r4(); w2(4);
+                return a;
+
+        }
+        return -1;
+}       
+
+static void dstr_write_regr(  PIA *pi, int cont, int regr, int val )
+
+{       int  r;
+
+        r = regr + cont_map[cont];
+
+	w0(0x81); P1; 
+	if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
+	P2; w0(r); P1;
+	
+        switch (pi->mode)  {
+
+        case 0:
+        case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
+		break;
+
+	case 2:
+	case 3:
+        case 4: w4(val); 
+                break;
+        }
+}
+
+#define  CCP(x)  w0(0xff);w2(0xc);w2(4);\
+		 w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
+		 w0(x);w2(5);w2(4);
+
+static void dstr_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+        w2(4); CCP(0xe0); w0(0xff);
+}
+
+static void dstr_disconnect ( PIA *pi )
+
+{       CCP(0x30);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void dstr_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, a, b;
+
+        w0(0x81); P1;
+        if (pi->mode) { w0(0x19); } else { w0(9); }
+	P2; w0(0x82); P1; P3; w0(0x20); P1;
+
+        switch (pi->mode) {
+
+        case 0: for (k=0;k<count;k++) {
+                        w2(6); a = r1(); w2(4);
+                        w2(6); b = r1(); w2(4);
+                        buf[k] = j44(a,b);
+                } 
+                break;
+
+        case 1: w0(0);
+                for (k=0;k<count;k++) {
+                        w2(0x26); buf[k] = r0(); w2(0x24);
+                }
+                w2(4);
+                break;
+
+        case 2: w2(0x24); 
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4);
+                break;
+
+        case 3: w2(0x24); 
+                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4);
+                break;
+
+        case 4: w2(0x24); 
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4);
+                break;
+
+        }
+}
+
+static void dstr_write_block( PIA *pi, char * buf, int count )
+
+{       int	k;
+
+        w0(0x81); P1;
+        if (pi->mode) { w0(0x19); } else { w0(9); }
+        P2; w0(0x82); P1; P3; w0(0x20); P1;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1: for (k=0;k<count;k++) {
+                        w2(5); w0(buf[k]); w2(7);
+                }
+                w2(5); w2(4);
+                break;
+
+        case 2: w2(0xc5);
+                for (k=0;k<count;k++) w4(buf[k]);
+		w2(0xc4);
+                break;
+
+        case 3: w2(0xc5);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        case 4: w2(0xc5);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        }
+}
+
+
+static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
+				   "EPP-16","EPP-32"};
+
+        printk("%s: dstr %s, DataStor EP2000 at 0x%x, ",
+                pi->device,DSTR_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol dstr = {
+	.owner		= THIS_MODULE,
+	.name		= "dstr",
+	.max_mode	= 5,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= dstr_write_regr,
+	.read_regr	= dstr_read_regr,
+	.write_block	= dstr_write_block,
+	.read_block	= dstr_read_block,
+	.connect	= dstr_connect,
+	.disconnect	= dstr_disconnect,
+	.log_adapter	= dstr_log_adapter,
+};
+
+static int __init dstr_init(void)
+{
+	return paride_register(&dstr);
+}
+
+static void __exit dstr_exit(void)
+{
+	paride_unregister(&dstr);
+}
+
+MODULE_LICENSE("GPL");
+module_init(dstr_init)
+module_exit(dstr_exit)
diff --git a/drivers/block/paride/epat.c b/drivers/block/paride/epat.c
new file mode 100644
index 00000000..1bcdff77
--- /dev/null
+++ b/drivers/block/paride/epat.c
@@ -0,0 +1,340 @@
+/* 
+        epat.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                            Under the terms of the GNU General Public License.
+
+	This is the low level protocol driver for the EPAT parallel
+        to IDE adapter from Shuttle Technologies.  This adapter is
+        used in many popular parallel port disk products such as the
+        SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
+	
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+        1.02    Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
+
+*/
+
+#define EPAT_VERSION      "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)		(((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b)		(((a>>3)&0x1f)+((b<<4)&0xe0))
+
+static int epatc8;
+
+module_param(epatc8, int, 0);
+MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
+	"used in any recent Imation SuperDisk (LS-120) drive.");
+
+/* cont =  0   IDE register file
+   cont =  1   IDE control registers
+   cont =  2   internal EPAT registers
+*/
+
+static int cont_map[3] = { 0x18, 0x10, 0 };
+
+static void epat_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	int r;
+
+	r = regr + cont_map[cont];
+
+	switch (pi->mode) {
+
+	case 0:
+	case 1:
+	case 2:	w0(0x60+r); w2(1); w0(val); w2(4);
+		break;
+
+	case 3:
+	case 4:
+	case 5: w3(0x40+r); w4(val);
+		break;
+
+	}
+}
+
+static int epat_read_regr( PIA *pi, int cont, int regr )
+
+{	int  a, b, r;
+
+	r = regr + cont_map[cont];
+
+	switch (pi->mode) {
+
+	case 0:	w0(r); w2(1); w2(3); 
+		a = r1(); w2(4); b = r1();
+		return j44(a,b);
+
+	case 1: w0(0x40+r); w2(1); w2(4);
+		a = r1(); b = r2(); w0(0xff);
+		return j53(a,b);
+
+	case 2: w0(0x20+r); w2(1); w2(0x25);
+		a = r0(); w2(4);
+		return a;
+
+	case 3:
+	case 4:
+	case 5: w3(r); w2(0x24); a = r4(); w2(4);
+		return a;
+
+	}
+	return -1;	/* never gets here */
+}
+
+static void epat_read_block( PIA *pi, char * buf, int count )
+
+{	int  k, ph, a, b;
+
+	switch (pi->mode) {
+
+	case 0:	w0(7); w2(1); w2(3); w0(0xff);
+		ph = 0;
+		for(k=0;k<count;k++) {
+			if (k == count-1) w0(0xfd);
+			w2(6+ph); a = r1();
+			if (a & 8) b = a; 
+			  else { w2(4+ph); b = r1(); }
+			buf[k] = j44(a,b);
+			ph =  1 - ph;
+		}
+		w0(0); w2(4);
+		break;
+
+	case 1: w0(0x47); w2(1); w2(5); w0(0xff);
+		ph = 0;
+		for(k=0;k<count;k++) {
+			if (k == count-1) w0(0xfd); 
+			w2(4+ph);
+			a = r1(); b = r2();
+			buf[k] = j53(a,b);
+			ph = 1 - ph;
+		}
+		w0(0); w2(4);
+		break;
+
+	case 2: w0(0x27); w2(1); w2(0x25); w0(0);
+		ph = 0;
+		for(k=0;k<count-1;k++) {
+			w2(0x24+ph);
+			buf[k] = r0();
+			ph = 1 - ph;
+		}
+		w2(0x26); w2(0x27); buf[count-1] = r0(); 
+		w2(0x25); w2(4);
+		break;
+
+	case 3: w3(0x80); w2(0x24);
+		for(k=0;k<count-1;k++) buf[k] = r4();
+		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+		w2(4);
+		break;
+
+	case 4: w3(0x80); w2(0x24);
+		for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+		buf[count-2] = r4();
+		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+		w2(4);
+		break;
+
+	case 5: w3(0x80); w2(0x24);
+		for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+		for(k=count-4;k<count-1;k++) buf[k] = r4();
+		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+		w2(4);
+		break;
+
+	}
+}
+
+static void epat_write_block( PIA *pi, char * buf, int count )   
+
+{	int ph, k;
+
+	switch (pi->mode) {
+
+	case 0:
+	case 1:
+	case 2: w0(0x67); w2(1); w2(5);
+		ph = 0;
+		for(k=0;k<count;k++) {
+		  	w0(buf[k]);
+			w2(4+ph);
+			ph = 1 - ph;
+		}
+		w2(7); w2(4);
+		break;
+
+	case 3: w3(0xc0); 
+		for(k=0;k<count;k++) w4(buf[k]);
+		w2(4);
+		break;
+
+	case 4: w3(0xc0); 
+		for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
+		w2(4);
+		break;
+
+	case 5: w3(0xc0); 
+		for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
+		w2(4);
+		break;
+
+	}
+}
+
+/* these macros access the EPAT registers in native addressing */
+
+#define	WR(r,v)		epat_write_regr(pi,2,r,v)
+#define	RR(r)		(epat_read_regr(pi,2,r))
+
+/* and these access the IDE task file */
+
+#define WRi(r,v)         epat_write_regr(pi,0,r,v)
+#define RRi(r)           (epat_read_regr(pi,0,r))
+
+/* FIXME:  the CPP stuff should be fixed to handle multiple EPATs on a chain */
+
+#define CPP(x) 	w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+                w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void epat_connect ( PIA *pi )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+ 	/* Initialize the chip */
+	CPP(0);
+
+	if (epatc8) {
+		CPP(0x40);CPP(0xe0);
+		w0(0);w2(1);w2(4);
+		WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
+		WR(0xe,0xf);WR(0xf,4);
+		/* WR(0xe,0xa);WR(0xf,4); */
+		WR(0xe,0xd);WR(0xf,0);
+		/* CPP(0x30); */
+	}
+
+        /* Connect to the chip */
+	CPP(0xe0);
+        w0(0);w2(1);w2(4); /* Idle into SPP */
+        if (pi->mode >= 3) {
+          w0(0);w2(1);w2(4);w2(0xc);
+          /* Request EPP */
+          w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
+        }
+
+	if (!epatc8) {
+		WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
+	}
+}
+
+static void epat_disconnect (PIA *pi)
+{	CPP(0x30);
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
+
+static int epat_test_proto( PIA *pi, char * scratch, int verbose )
+
+{       int     k, j, f, cc;
+	int	e[2] = {0,0};
+
+        epat_connect(pi);
+	cc = RR(0xd);
+	epat_disconnect(pi);
+
+	epat_connect(pi);
+	for (j=0;j<2;j++) {
+  	    WRi(6,0xa0+j*0x10);
+            for (k=0;k<256;k++) {
+                WRi(2,k^0xaa);
+                WRi(3,k^0x55);
+                if (RRi(2) != (k^0xaa)) e[j]++;
+                }
+	    }
+        epat_disconnect(pi);
+
+        f = 0;
+        epat_connect(pi);
+        WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
+        epat_read_block(pi,scratch,512);
+	
+        for (k=0;k<256;k++) {
+            if ((scratch[2*k] & 0xff) != k) f++;
+            if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
+        }
+        epat_disconnect(pi);
+
+        if (verbose)  {
+            printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+		   pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
+	}
+	
+        return (e[0] && e[1]) || f;
+}
+
+static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{	int	ver;
+        char    *mode_string[6] = 
+		   {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
+
+	epat_connect(pi);
+	WR(0xa,0x38);		/* read the version code */
+        ver = RR(0xb);
+        epat_disconnect(pi);
+
+	printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
+		pi->device,EPAT_VERSION,ver,pi->port);
+	printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epat = {
+	.owner		= THIS_MODULE,
+	.name		= "epat",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= epat_write_regr,
+	.read_regr	= epat_read_regr,
+	.write_block	= epat_write_block,
+	.read_block	= epat_read_block,
+	.connect	= epat_connect,
+	.disconnect	= epat_disconnect,
+	.test_proto	= epat_test_proto,
+	.log_adapter	= epat_log_adapter,
+};
+
+static int __init epat_init(void)
+{
+#ifdef CONFIG_PARIDE_EPATC8
+	epatc8 = 1;
+#endif
+	return paride_register(&epat);
+}
+
+static void __exit epat_exit(void)
+{
+	paride_unregister(&epat);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epat_init)
+module_exit(epat_exit)
diff --git a/drivers/block/paride/epia.c b/drivers/block/paride/epia.c
new file mode 100644
index 00000000..fb0e782d
--- /dev/null
+++ b/drivers/block/paride/epia.c
@@ -0,0 +1,316 @@
+/* 
+        epia.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+        epia.c is a low-level protocol driver for Shuttle Technologies 
+	EPIA parallel to IDE adapter chip.  This device is now obsolete
+	and has been replaced with the EPAT chip, which is supported
+	by epat.c, however, some devices based on EPIA are still
+	available.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+	1.02    GRG 1998.06.17 support older versions of EPIA
+
+*/
+
+#define EPIA_VERSION      "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes:  0  nybble reads on port 1, 8-bit writes
+                1  5/3 reads on ports 1 & 2, 8-bit writes
+                2  8-bit reads and writes
+                3  8-bit EPP mode
+		4  16-bit EPP
+		5  32-bit EPP
+*/
+
+#define j44(a,b)                (((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b)                (((a>>3)&0x1f)+((b<<4)&0xe0))
+
+/* cont =  0   IDE register file
+   cont =  1   IDE control registers
+*/
+
+static int cont_map[2] = { 0, 0x80 };
+
+static int epia_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, r;
+
+	regr += cont_map[cont];
+
+        switch (pi->mode)  {
+
+        case 0: r = regr^0x39;
+                w0(r); w2(1); w2(3); w0(r);
+                a = r1(); w2(1); b = r1(); w2(4);
+                return j44(a,b);
+
+        case 1: r = regr^0x31;
+                w0(r); w2(1); w0(r&0x37); 
+                w2(3); w2(5); w0(r|0xf0);
+                a = r1(); b = r2(); w2(4);
+                return j53(a,b);
+
+        case 2: r = regr^0x29;
+                w0(r); w2(1); w2(0X21); w2(0x23); 
+                a = r0(); w2(4);
+                return a;
+
+	case 3:
+	case 4:
+        case 5: w3(regr); w2(0x24); a = r4(); w2(4);
+                return a;
+
+        }
+        return -1;
+}       
+
+static void epia_write_regr( PIA *pi, int cont, int regr, int val)
+
+{       int  r;
+
+	regr += cont_map[cont];
+
+        switch (pi->mode)  {
+
+        case 0:
+        case 1:
+        case 2: r = regr^0x19;
+                w0(r); w2(1); w0(val); w2(3); w2(4);
+                break;
+
+	case 3:
+	case 4:
+        case 5: r = regr^0x40;
+                w3(r); w4(val); w2(4);
+                break;
+        }
+}
+
+#define WR(r,v)         epia_write_regr(pi,0,r,v)
+#define RR(r)           (epia_read_regr(pi,0,r))
+
+/* The use of register 0x84 is entirely unclear - it seems to control
+   some EPP counters ...  currently we know about 3 different block
+   sizes:  the standard 512 byte reads and writes, 12 byte writes and 
+   2048 byte reads (the last two being used in the CDrom drivers.
+*/
+
+static void epia_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+        w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
+        w2(1); w2(4);
+        if (pi->mode >= 3) { 
+                w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
+                w2(0x24); w2(0x26); w2(4);
+        }
+        WR(0x86,8);  
+}
+
+static void epia_disconnect ( PIA *pi )
+
+{       /* WR(0x84,0x10); */
+        w0(pi->saved_r0);
+        w2(1); w2(4);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void epia_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, ph, a, b;
+
+        switch (pi->mode) {
+
+        case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
+                ph = 1;
+                for (k=0;k<count;k++) {
+                        w2(2+ph); a = r1();
+                        w2(4+ph); b = r1();
+                        buf[k] = j44(a,b);
+                        ph = 1 - ph;
+                } 
+                w0(0); w2(4);
+                break;
+
+        case 1: w0(0x91); w2(1); w0(0x10); w2(3); 
+                w0(0x51); w2(5); w0(0xd1); 
+                ph = 1;
+                for (k=0;k<count;k++) {
+                        w2(4+ph);
+                        a = r1(); b = r2();
+                        buf[k] = j53(a,b);
+                        ph = 1 - ph;
+                }
+                w0(0); w2(4);
+                break;
+
+        case 2: w0(0x89); w2(1); w2(0x23); w2(0x21); 
+                ph = 1;
+                for (k=0;k<count;k++) {
+                        w2(0x24+ph);
+                        buf[k] = r0();
+                        ph = 1 - ph;
+                }
+                w2(6); w2(4);
+                break;
+
+        case 3: if (count > 512) WR(0x84,3);
+		w3(0); w2(0x24);
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4); WR(0x84,0);
+                break;
+
+        case 4: if (count > 512) WR(0x84,3);
+		w3(0); w2(0x24);
+		for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4); WR(0x84,0);
+                break;
+
+        case 5: if (count > 512) WR(0x84,3);
+		w3(0); w2(0x24);
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4); WR(0x84,0);
+                break;
+
+        }
+}
+
+static void epia_write_block( PIA *pi, char * buf, int count )
+
+{       int     ph, k, last, d;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1:
+        case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
+                ph = 0;  last = 0x8000;
+                for (k=0;k<count;k++) {
+                        d = buf[k];
+                        if (d != last) { last = d; w0(d); }
+                        w2(4+ph);
+                        ph = 1 - ph;
+                }
+                w2(7); w2(4);
+                break;
+
+        case 3: if (count < 512) WR(0x84,1);
+		w3(0x40);
+                for (k=0;k<count;k++) w4(buf[k]);
+		if (count < 512) WR(0x84,0);
+                break;
+
+        case 4: if (count < 512) WR(0x84,1);
+		w3(0x40);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+		if (count < 512) WR(0x84,0);
+                break;
+
+        case 5: if (count < 512) WR(0x84,1);
+		w3(0x40);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+		if (count < 512) WR(0x84,0);
+                break;
+
+        }
+
+}
+
+static int epia_test_proto( PIA *pi, char * scratch, int verbose )
+
+{       int     j, k, f;
+	int	e[2] = {0,0};
+
+        epia_connect(pi);
+        for (j=0;j<2;j++) {
+            WR(6,0xa0+j*0x10);
+            for (k=0;k<256;k++) {
+                WR(2,k^0xaa);
+                WR(3,k^0x55);
+                if (RR(2) != (k^0xaa)) e[j]++;
+                }
+	    WR(2,1); WR(3,1);
+            }
+        epia_disconnect(pi);
+
+        f = 0;
+        epia_connect(pi);
+        WR(0x84,8);
+        epia_read_block(pi,scratch,512);
+        for (k=0;k<256;k++) {
+            if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
+            if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
+        }
+        WR(0x84,0);
+        epia_disconnect(pi);
+
+        if (verbose)  {
+            printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+                   pi->device,pi->port,pi->mode,e[0],e[1],f);
+        }
+        
+        return (e[0] && e[1]) || f;
+
+}
+
+
+static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
+				   "EPP-8","EPP-16","EPP-32"};
+
+        printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
+                pi->device,EPIA_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epia = {
+	.owner		= THIS_MODULE,
+	.name		= "epia",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= epia_write_regr,
+	.read_regr	= epia_read_regr,
+	.write_block	= epia_write_block,
+	.read_block	= epia_read_block,
+	.connect	= epia_connect,
+	.disconnect	= epia_disconnect,
+	.test_proto	= epia_test_proto,
+	.log_adapter	= epia_log_adapter,
+};
+
+static int __init epia_init(void)
+{
+	return paride_register(&epia);
+}
+
+static void __exit epia_exit(void)
+{
+	paride_unregister(&epia);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epia_init)
+module_exit(epia_exit)
diff --git a/drivers/block/paride/fit2.c b/drivers/block/paride/fit2.c
new file mode 100644
index 00000000..38128375
--- /dev/null
+++ b/drivers/block/paride/fit2.c
@@ -0,0 +1,151 @@
+/* 
+        fit2.c        (c) 1998  Grant R. Guenther <grant@torque.net>
+                          Under the terms of the GNU General Public License.
+
+	fit2.c is a low-level protocol driver for the older version
+        of the Fidelity International Technology parallel port adapter.  
+	This adapter is used in their TransDisk 2000 and older TransDisk
+	3000 portable hard-drives.  As far as I can tell, this device
+	supports 4-bit mode _only_.  
+
+	Newer models of the FIT products use an enhanced protocol.
+	The "fit3" protocol module should support current drives.
+
+*/
+
+#define FIT2_VERSION      "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+
+NB:  The FIT adapter does not appear to use the control registers.
+So, we map ALT_STATUS to STATUS and NO-OP writes to the device
+control register - this means that IDE reset will not work on these
+devices.
+
+*/
+
+static void  fit2_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	if (cont == 1) return;
+	w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
+}
+
+static int fit2_read_regr( PIA *pi, int cont, int regr )
+
+{	int  a, b, r;
+
+	if (cont) {
+	  if (regr != 6) return 0xff;
+	  r = 7;
+	} else r = regr + 0x10;
+
+	w2(0xc); w0(r); w2(4); w2(5); 
+	         w0(0); a = r1();
+	         w0(1); b = r1();
+	w2(4);
+
+	return j44(a,b);
+
+}
+
+static void fit2_read_block( PIA *pi, char * buf, int count )
+
+{	int  k, a, b, c, d;
+
+	w2(0xc); w0(0x10);
+
+	for (k=0;k<count/4;k++) {
+
+		w2(4); w2(5);
+		w0(0); a = r1(); w0(1); b = r1();
+		w0(3); c = r1(); w0(2); d = r1(); 
+		buf[4*k+0] = j44(a,b);
+		buf[4*k+1] = j44(d,c);
+
+                w2(4); w2(5);
+                       a = r1(); w0(3); b = r1();
+                w0(1); c = r1(); w0(0); d = r1(); 
+                buf[4*k+2] = j44(d,c);
+                buf[4*k+3] = j44(a,b);
+
+	}
+
+	w2(4);
+
+}
+
+static void fit2_write_block( PIA *pi, char * buf, int count )
+
+{	int k;
+
+
+	w2(0xc); w0(0); 
+	for (k=0;k<count/2;k++) {
+		w2(4); w0(buf[2*k]); 
+		w2(5); w0(buf[2*k+1]);
+	}
+	w2(4);
+}
+
+static void fit2_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(0xcc); 
+}
+
+static void fit2_disconnect ( PIA *pi )
+
+{       w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+                pi->device,FIT2_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol fit2 = {
+	.owner		= THIS_MODULE,
+	.name		= "fit2",
+	.max_mode	= 1,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= fit2_write_regr,
+	.read_regr	= fit2_read_regr,
+	.write_block	= fit2_write_block,
+	.read_block	= fit2_read_block,
+	.connect	= fit2_connect,
+	.disconnect	= fit2_disconnect,
+	.log_adapter	= fit2_log_adapter,
+};
+
+static int __init fit2_init(void)
+{
+	return paride_register(&fit2);
+}
+
+static void __exit fit2_exit(void)
+{
+	paride_unregister(&fit2);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit2_init)
+module_exit(fit2_exit)
diff --git a/drivers/block/paride/fit3.c b/drivers/block/paride/fit3.c
new file mode 100644
index 00000000..275d2694
--- /dev/null
+++ b/drivers/block/paride/fit3.c
@@ -0,0 +1,211 @@
+/* 
+        fit3.c        (c) 1998  Grant R. Guenther <grant@torque.net>
+                          Under the terms of the GNU General Public License.
+
+	fit3.c is a low-level protocol driver for newer models 
+        of the Fidelity International Technology parallel port adapter.  
+	This adapter is used in their TransDisk 3000 portable 
+	hard-drives, as well as CD-ROM, PD-CD and other devices.
+
+	The TD-2000 and certain older devices use a different protocol.
+	Try the fit2 protocol module with them.
+
+        NB:  The FIT adapters do not appear to support the control 
+	registers.  So, we map ALT_STATUS to STATUS and NO-OP writes 
+	to the device control register - this means that IDE reset 
+	will not work on these devices.
+
+*/
+
+#define FIT3_VERSION      "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                (((a>>3)&0x0f)|((b<<1)&0xf0))
+
+#define w7(byte)                {out_p(7,byte);}
+#define r7()                    (in_p(7) & 0xff)
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+
+*/
+
+static void  fit3_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	if (cont == 1) return;
+
+	switch (pi->mode) {
+
+	case 0:
+	case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc); 
+		w0(val); w2(0xd); 
+		w0(0);   w2(0xc);
+		break;
+
+	case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+		w4(val); w4(0);
+		w2(0xc);
+		break;
+
+	}
+}
+
+static int fit3_read_regr( PIA *pi, int cont, int regr )
+
+{	int  a, b;
+
+	if (cont) {
+	  if (regr != 6) return 0xff;
+	  regr = 7;
+	} 
+
+	switch (pi->mode) {
+
+	case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
+		w2(0xd); a = r1();
+		w2(0xf); b = r1(); 
+		w2(0xc);
+		return j44(a,b);
+
+	case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+		w2(0xec); w2(0xee); w2(0xef); a = r0(); 
+		w2(0xc);
+		return a;
+
+	case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); 
+		w2(0xec); 
+		a = r4(); b = r4(); 
+		w2(0xc);
+		return a;
+
+	}
+	return -1; 
+
+}
+
+static void fit3_read_block( PIA *pi, char * buf, int count )
+
+{	int  k, a, b, c, d;
+
+	switch (pi->mode) {
+
+	case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);
+		for (k=0;k<count/2;k++) {
+		    w2(0xd); a = r1();
+		    w2(0xf); b = r1();
+		    w2(0xc); c = r1();
+		    w2(0xe); d = r1();
+		    buf[2*k  ] = j44(a,b);
+		    buf[2*k+1] = j44(c,d);
+		}
+		w2(0xc);
+		break;
+
+	case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc); 
+		w2(0xec); w2(0xee);
+		for (k=0;k<count/2;k++) {
+		    w2(0xef); a = r0();
+		    w2(0xee); b = r0();
+                    buf[2*k  ] = a;
+                    buf[2*k+1] = b;
+		}
+		w2(0xec); 
+		w2(0xc);
+		break;
+
+	case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc); 
+                w2(0xec);
+		for (k=0;k<count;k++) buf[k] = r4();
+                w2(0xc);
+		break;
+
+	}
+}
+
+static void fit3_write_block( PIA *pi, char * buf, int count )
+
+{	int k;
+
+        switch (pi->mode) {
+
+	case 0:
+        case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);
+                for (k=0;k<count/2;k++) {
+ 		    w0(buf[2*k  ]); w2(0xd);
+ 		    w0(buf[2*k+1]); w2(0xc);
+		}
+		break;
+
+        case 2: w2(0xc); w0(0); w2(0x8); w2(0xc); 
+                for (k=0;k<count;k++) w4(buf[k]);
+                w2(0xc);
+		break;
+	}
+}
+
+static void fit3_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(0xc); w0(0); w2(0xa);
+	if (pi->mode == 2) { 
+		w2(0xc); w0(0x9); w2(0x8); w2(0xc); 
+		}
+}
+
+static void fit3_disconnect ( PIA *pi )
+
+{       w2(0xc); w0(0xa); w2(0x8); w2(0xc);
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[3] = {"4-bit","8-bit","EPP"};
+
+	printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "
+	       "mode %d (%s), delay %d\n",
+                pi->device,FIT3_VERSION,pi->port,
+		pi->mode,mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol fit3 = {
+	.owner		= THIS_MODULE,
+	.name		= "fit3",
+	.max_mode	= 3,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= fit3_write_regr,
+	.read_regr	= fit3_read_regr,
+	.write_block	= fit3_write_block,
+	.read_block	= fit3_read_block,
+	.connect	= fit3_connect,
+	.disconnect	= fit3_disconnect,
+	.log_adapter	= fit3_log_adapter,
+};
+
+static int __init fit3_init(void)
+{
+	return paride_register(&fit3);
+}
+
+static void __exit fit3_exit(void)
+{
+	paride_unregister(&fit3);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit3_init)
+module_exit(fit3_exit)
diff --git a/drivers/block/paride/friq.c b/drivers/block/paride/friq.c
new file mode 100644
index 00000000..4f2ba244
--- /dev/null
+++ b/drivers/block/paride/friq.c
@@ -0,0 +1,276 @@
+/* 
+	friq.c	(c) 1998    Grant R. Guenther <grant@torque.net>
+		            Under the terms of the GNU General Public License
+
+	friq.c is a low-level protocol driver for the Freecom "IQ"
+	parallel port IDE adapter.   Early versions of this adapter
+	use the 'frpw' protocol.
+	
+	Freecom uses this adapter in a battery powered external 
+	CD-ROM drive.  It is also used in LS-120 drives by
+	Maxell and Panasonic, and other devices.
+
+	The battery powered drive requires software support to
+	control the power to the drive.  This module enables the
+	drive power when the high level driver (pcd) is loaded
+	and disables it when the module is unloaded.  Note, if
+	the friq module is built in to the kernel, the power
+	will never be switched off, so other means should be
+	used to conserve battery power.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.12.20	 Added support for soft power switch
+*/
+
+#define	FRIQ_VERSION	"1.01" 
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define CMD(x)		w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
+			w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
+
+#define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x08, 0x10 };
+
+static int friq_read_regr( PIA *pi, int cont, int regr )
+
+{	int	h,l,r;
+
+	r = regr + cont_map[cont];
+
+	CMD(r);
+	w2(6); l = r1();
+	w2(4); h = r1();
+	w2(4); 
+
+	return j44(l,h);
+
+}
+
+static void friq_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	int r;
+
+        r = regr + cont_map[cont];
+
+	CMD(r);
+	w0(val);
+	w2(5);w2(7);w2(5);w2(4);
+}
+
+static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{       int     h, l, k, ph;
+
+        switch(pi->mode) {
+
+        case 0: CMD(regr); 
+                for (k=0;k<count;k++) {
+                        w2(6); l = r1();
+                        w2(4); h = r1();
+                        buf[k] = j44(l,h);
+                }
+                w2(4);
+                break;
+
+        case 1: ph = 2;
+                CMD(regr+0xc0); 
+                w0(0xff);
+                for (k=0;k<count;k++) {
+                        w2(0xa4 + ph); 
+                        buf[k] = r0();
+                        ph = 2 - ph;
+                } 
+                w2(0xac); w2(0xa4); w2(4);
+                break;
+
+	case 2: CMD(regr+0x80);
+		for (k=0;k<count-2;k++) buf[k] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count-2] = r4();
+		buf[count-1] = r4();
+		w2(4);
+		break;
+
+	case 3: CMD(regr+0x80);
+                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+                w2(0xac); w2(0xa4);
+                buf[count-2] = r4();
+                buf[count-1] = r4();
+                w2(4);
+                break;
+
+	case 4: CMD(regr+0x80);
+                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+                buf[count-4] = r4();
+                buf[count-3] = r4();
+                w2(0xac); w2(0xa4);
+                buf[count-2] = r4();
+                buf[count-1] = r4();
+                w2(4);
+                break;
+
+        }
+}
+
+static void friq_read_block( PIA *pi, char * buf, int count)
+
+{	friq_read_block_int(pi,buf,count,0x08);
+}
+
+static void friq_write_block( PIA *pi, char * buf, int count )
+ 
+{	int	k;
+
+	switch(pi->mode) {
+
+	case 0:
+	case 1: CMD(8); w2(5);
+        	for (k=0;k<count;k++) {
+			w0(buf[k]);
+			w2(7);w2(5);
+		}
+		w2(4);
+		break;
+
+	case 2: CMD(0xc8); w2(5);
+		for (k=0;k<count;k++) w4(buf[k]);
+		w2(4);
+		break;
+
+        case 3: CMD(0xc8); w2(5);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(4);
+                break;
+
+        case 4: CMD(0xc8); w2(5);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(4);
+                break;
+	}
+}
+
+static void friq_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(4);
+}
+
+static void friq_disconnect ( PIA *pi )
+
+{       CMD(0x20);
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static int friq_test_proto( PIA *pi, char * scratch, int verbose )
+
+{       int     j, k, r;
+	int	e[2] = {0,0};
+
+	pi->saved_r0 = r0();	
+	w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
+	udelay(500);
+	w0(pi->saved_r0);
+
+	friq_connect(pi);
+	for (j=0;j<2;j++) {
+                friq_write_regr(pi,0,6,0xa0+j*0x10);
+                for (k=0;k<256;k++) {
+                        friq_write_regr(pi,0,2,k^0xaa);
+                        friq_write_regr(pi,0,3,k^0x55);
+                        if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+                        }
+                }
+	friq_disconnect(pi);
+
+	friq_connect(pi);
+        friq_read_block_int(pi,scratch,512,0x10);
+        r = 0;
+        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	friq_disconnect(pi);
+
+        if (verbose)  {
+            printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+                   pi->device,pi->port,pi->mode,e[0],e[1],r);
+        }
+
+        return (r || (e[0] && e[1]));
+}
+
+
+static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[6] = {"4-bit","8-bit",
+				   "EPP-8","EPP-16","EPP-32"};
+
+        printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
+		FRIQ_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+	pi->private = 1;
+	friq_connect(pi);
+	CMD(0x9e);  		/* disable sleep timer */
+	friq_disconnect(pi);
+
+}
+
+static void friq_release_proto( PIA *pi)
+{
+	if (pi->private) {		/* turn off the power */
+		friq_connect(pi);
+		CMD(0x1d); CMD(0x1e);
+		friq_disconnect(pi);
+		pi->private = 0;
+	}
+}
+
+static struct pi_protocol friq = {
+	.owner		= THIS_MODULE,
+	.name		= "friq",
+	.max_mode	= 5,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= friq_write_regr,
+	.read_regr	= friq_read_regr,
+	.write_block	= friq_write_block,
+	.read_block	= friq_read_block,
+	.connect	= friq_connect,
+	.disconnect	= friq_disconnect,
+	.test_proto	= friq_test_proto,
+	.log_adapter	= friq_log_adapter,
+	.release_proto	= friq_release_proto,
+};
+
+static int __init friq_init(void)
+{
+	return paride_register(&friq);
+}
+
+static void __exit friq_exit(void)
+{
+	paride_unregister(&friq);
+}
+
+MODULE_LICENSE("GPL");
+module_init(friq_init)
+module_exit(friq_exit)
diff --git a/drivers/block/paride/frpw.c b/drivers/block/paride/frpw.c
new file mode 100644
index 00000000..c3cde364
--- /dev/null
+++ b/drivers/block/paride/frpw.c
@@ -0,0 +1,313 @@
+/* 
+	frpw.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
+		            Under the terms of the GNU General Public License
+
+	frpw.c is a low-level protocol driver for the Freecom "Power"
+	parallel port IDE adapter.
+	
+	Some applications of this adapter may require a "printer" reset
+	prior to loading the driver.  This can be done by loading and
+	unloading the "lp" driver, or it can be done by this driver
+	if you define FRPW_HARD_RESET.  The latter is not recommended
+	as it may upset devices on other ports.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+			       fix chip detect
+			       added EPP-16 and EPP-32
+	1.02    GRG 1998.09.23 added hard reset to initialisation process
+	1.03    GRG 1998.12.14 made hard reset conditional
+
+*/
+
+#define	FRPW_VERSION	"1.03" 
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define cec4		w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
+#define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x08, 0x10 };
+
+static int frpw_read_regr( PIA *pi, int cont, int regr )
+
+{	int	h,l,r;
+
+	r = regr + cont_map[cont];
+
+	w2(4);
+	w0(r); cec4;
+	w2(6); l = r1();
+	w2(4); h = r1();
+	w2(4); 
+
+	return j44(l,h);
+
+}
+
+static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	int r;
+
+        r = regr + cont_map[cont];
+
+	w2(4); w0(r); cec4; 
+	w0(val);
+	w2(5);w2(7);w2(5);w2(4);
+}
+
+static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{       int     h, l, k, ph;
+
+        switch(pi->mode) {
+
+        case 0: w2(4); w0(regr); cec4;
+                for (k=0;k<count;k++) {
+                        w2(6); l = r1();
+                        w2(4); h = r1();
+                        buf[k] = j44(l,h);
+                }
+                w2(4);
+                break;
+
+        case 1: ph = 2;
+                w2(4); w0(regr + 0xc0); cec4;
+                w0(0xff);
+                for (k=0;k<count;k++) {
+                        w2(0xa4 + ph); 
+                        buf[k] = r0();
+                        ph = 2 - ph;
+                } 
+                w2(0xac); w2(0xa4); w2(4);
+                break;
+
+        case 2: w2(4); w0(regr + 0x80); cec4;
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(0xac); w2(0xa4);
+                w2(4);
+                break;
+
+	case 3: w2(4); w0(regr + 0x80); cec4;
+		for (k=0;k<count-2;k++) buf[k] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count-2] = r4();
+		buf[count-1] = r4();
+		w2(4);
+		break;
+
+	case 4: w2(4); w0(regr + 0x80); cec4;
+                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+                w2(0xac); w2(0xa4);
+                buf[count-2] = r4();
+                buf[count-1] = r4();
+                w2(4);
+                break;
+
+	case 5: w2(4); w0(regr + 0x80); cec4;
+                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+                buf[count-4] = r4();
+                buf[count-3] = r4();
+                w2(0xac); w2(0xa4);
+                buf[count-2] = r4();
+                buf[count-1] = r4();
+                w2(4);
+                break;
+
+        }
+}
+
+static void frpw_read_block( PIA *pi, char * buf, int count)
+
+{	frpw_read_block_int(pi,buf,count,0x08);
+}
+
+static void frpw_write_block( PIA *pi, char * buf, int count )
+ 
+{	int	k;
+
+	switch(pi->mode) {
+
+	case 0:
+	case 1:
+	case 2: w2(4); w0(8); cec4; w2(5);
+        	for (k=0;k<count;k++) {
+			w0(buf[k]);
+			w2(7);w2(5);
+		}
+		w2(4);
+		break;
+
+	case 3: w2(4); w0(0xc8); cec4; w2(5);
+		for (k=0;k<count;k++) w4(buf[k]);
+		w2(4);
+		break;
+
+        case 4: w2(4); w0(0xc8); cec4; w2(5);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(4);
+                break;
+
+        case 5: w2(4); w0(0xc8); cec4; w2(5);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(4);
+                break;
+	}
+}
+
+static void frpw_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(4);
+}
+
+static void frpw_disconnect ( PIA *pi )
+
+{       w2(4); w0(0x20); cec4;
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+/* Stub logic to see if PNP string is available - used to distinguish
+   between the Xilinx and ASIC implementations of the Freecom adapter.
+*/
+
+static int frpw_test_pnp ( PIA *pi )
+
+/*  returns chip_type:   0 = Xilinx, 1 = ASIC   */
+
+{	int olddelay, a, b;
+
+#ifdef FRPW_HARD_RESET
+        w0(0); w2(8); udelay(50); w2(0xc);   /* parallel bus reset */
+        mdelay(1500);
+#endif
+
+	olddelay = pi->delay;
+	pi->delay = 10;
+
+	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	
+	w2(4); w0(4); w2(6); w2(7);
+	a = r1() & 0xff; w2(4); b = r1() & 0xff;
+	w2(0xc); w2(0xe); w2(4);
+
+	pi->delay = olddelay;
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+
+	return ((~a&0x40) && (b&0x40));
+} 
+
+/* We use the pi->private to remember the result of the PNP test.
+   To make this work, private = port*2 + chip.  Yes, I know it's
+   a hack :-(
+*/
+
+static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
+
+{       int     j, k, r;
+	int	e[2] = {0,0};
+
+	if ((pi->private>>1) != pi->port)
+	   pi->private = frpw_test_pnp(pi) + 2*pi->port;
+
+	if (((pi->private%2) == 0) && (pi->mode > 2)) {
+	   if (verbose) 
+		printk("%s: frpw: Xilinx does not support mode %d\n",
+			pi->device, pi->mode);
+	   return 1;
+	}
+
+	if (((pi->private%2) == 1) && (pi->mode == 2)) {
+	   if (verbose)
+		printk("%s: frpw: ASIC does not support mode 2\n",
+			pi->device);
+	   return 1;
+	}
+
+	frpw_connect(pi);
+	for (j=0;j<2;j++) {
+                frpw_write_regr(pi,0,6,0xa0+j*0x10);
+                for (k=0;k<256;k++) {
+                        frpw_write_regr(pi,0,2,k^0xaa);
+                        frpw_write_regr(pi,0,3,k^0x55);
+                        if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+                        }
+                }
+	frpw_disconnect(pi);
+
+	frpw_connect(pi);
+        frpw_read_block_int(pi,scratch,512,0x10);
+        r = 0;
+        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	frpw_disconnect(pi);
+
+        if (verbose)  {
+            printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+                   pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
+        }
+
+        return (r || (e[0] && e[1]));
+}
+
+
+static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[6] = {"4-bit","8-bit","EPP",
+				   "EPP-8","EPP-16","EPP-32"};
+
+        printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
+		FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol frpw = {
+	.owner		= THIS_MODULE,
+	.name		= "frpw",
+	.max_mode	= 6,
+	.epp_first	= 2,
+	.default_delay	= 2,
+	.max_units	= 1,
+	.write_regr	= frpw_write_regr,
+	.read_regr	= frpw_read_regr,
+	.write_block	= frpw_write_block,
+	.read_block	= frpw_read_block,
+	.connect	= frpw_connect,
+	.disconnect	= frpw_disconnect,
+	.test_proto	= frpw_test_proto,
+	.log_adapter	= frpw_log_adapter,
+};
+
+static int __init frpw_init(void)
+{
+	return paride_register(&frpw);
+}
+
+static void __exit frpw_exit(void)
+{
+	paride_unregister(&frpw);
+}
+
+MODULE_LICENSE("GPL");
+module_init(frpw_init)
+module_exit(frpw_exit)
diff --git a/drivers/block/paride/kbic.c b/drivers/block/paride/kbic.c
new file mode 100644
index 00000000..35999c41
--- /dev/null
+++ b/drivers/block/paride/kbic.c
@@ -0,0 +1,305 @@
+/*
+        kbic.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+        This is a low-level driver for the KBIC-951A and KBIC-971A
+        parallel to IDE adapter chips from KingByte Information Systems.
+
+	The chips are almost identical, however, the wakeup code 
+	required for the 971A interferes with the correct operation of
+        the 951A, so this driver registers itself twice, once for
+	each chip.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define KBIC_VERSION      "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define r12w()			(delay_p,inw(pi->port+1)&0xffff) 
+
+#define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
+#define j53(w)                  (((w>>3)&0x1f)|((w>>4)&0xe0))
+
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x80, 0x40 };
+
+static int kbic_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, s;
+
+        s = cont_map[cont];
+
+	switch (pi->mode) {
+
+	case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
+	        a = r1(); w0(0x28); b = r1(); w2(4);
+		return j44(a,b);
+
+	case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
+		a = r12w(); w2(4);
+		return j53(a);
+
+	case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
+		a = r0(); w2(4);
+       		return a;
+
+	case 3:
+	case 4:
+	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+		a = r4(); b = r4(); w2(4); w2(0); w2(4);
+		return a;
+
+	}
+	return -1;
+}       
+
+static void  kbic_write_regr( PIA *pi, int cont, int regr, int val)
+
+{       int  s;
+
+        s = cont_map[cont];
+
+        switch (pi->mode) {
+
+	case 0: 
+        case 1:
+	case 2:	w0(regr|0x10|s); w2(4); w2(6); w2(4); 
+		w0(val); w2(5); w2(4);
+		break;
+
+	case 3:
+	case 4:
+	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+		w4(val); w4(val);
+		w2(4); w2(0); w2(4);
+                break;
+
+	}
+}
+
+static void k951_connect ( PIA *pi  )
+
+{ 	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+        w2(4); 
+}
+
+static void k951_disconnect ( PIA *pi )
+
+{      	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+}
+
+#define	CCP(x)	w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
+		w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
+
+static void k971_connect ( PIA *pi  )
+
+{ 	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	CCP(0x20);
+        w2(4); 
+}
+
+static void k971_disconnect ( PIA *pi )
+
+{       CCP(0x30);
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+}
+
+/* counts must be congruent to 0 MOD 4, but all known applications
+   have this property.
+*/
+
+static void kbic_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, a, b;
+
+        switch (pi->mode) {
+
+        case 0: w0(0x98); w2(4); w2(6); w2(4);
+                for (k=0;k<count/2;k++) {
+			w2(1); w0(8);    a = r1();
+			       w0(0x28); b = r1();
+			buf[2*k]   = j44(a,b);
+			w2(5);           b = r1();
+			       w0(8);    a = r1();
+			buf[2*k+1] = j44(a,b);
+			w2(4);
+                } 
+                break;
+
+        case 1: w0(0xb8); w2(4); w2(6); w2(4); 
+                for (k=0;k<count/4;k++) {
+                        w0(0xb8); 
+			w2(4); w2(5); 
+                        w0(8);    buf[4*k]   = j53(r12w());
+			w0(0xb8); buf[4*k+1] = j53(r12w());
+			w2(4); w2(5);
+			          buf[4*k+3] = j53(r12w());
+			w0(8);    buf[4*k+2] = j53(r12w());
+                }
+                w2(4);
+                break;
+
+        case 2: w0(0x88); w2(4); w2(6); w2(4);
+                for (k=0;k<count/2;k++) {
+                        w2(0xa0); w2(0xa1); buf[2*k] = r0();
+                        w2(0xa5); buf[2*k+1] = r0();
+                }
+                w2(4);
+                break;
+
+        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4); w2(0); w2(4);
+                break;
+
+	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4); w2(0); w2(4);
+                break;
+
+        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4); w2(0); w2(4);
+                break;
+
+
+        }
+}
+
+static void kbic_write_block( PIA *pi, char * buf, int count )
+
+{       int     k;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1:
+        case 2: w0(0x90); w2(4); w2(6); w2(4); 
+		for(k=0;k<count/2;k++) {
+			w0(buf[2*k+1]); w2(0); w2(4); 
+			w0(buf[2*k]);   w2(5); w2(4); 
+		}
+		break;
+
+        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for(k=0;k<count/2;k++) {
+			w4(buf[2*k+1]); 
+                        w4(buf[2*k]);
+                }
+		w2(4); w2(0); w2(4);
+		break;
+
+	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+                w2(4); w2(0); w2(4);
+                break;
+
+        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+                w2(4); w2(0); w2(4);
+                break;
+
+        }
+
+}
+
+static void kbic_log_adapter( PIA *pi, char * scratch, 
+			      int verbose, char * chip )
+
+{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
+				   "EPP-8","EPP_16","EPP-32"};
+
+        printk("%s: kbic %s, KingByte %s at 0x%x, ",
+                pi->device,KBIC_VERSION,chip,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static void k951_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{	kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
+}
+
+static void k971_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
+}
+
+static struct pi_protocol k951 = {
+	.owner		= THIS_MODULE,
+	.name		= "k951",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= kbic_write_regr,
+	.read_regr	= kbic_read_regr,
+	.write_block	= kbic_write_block,
+	.read_block	= kbic_read_block,
+	.connect	= k951_connect,
+	.disconnect	= k951_disconnect,
+	.log_adapter	= k951_log_adapter,
+};
+
+static struct pi_protocol k971 = {
+	.owner		= THIS_MODULE,
+	.name		= "k971",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= kbic_write_regr,
+	.read_regr	= kbic_read_regr,
+	.write_block	= kbic_write_block,
+	.read_block	= kbic_read_block,
+	.connect	= k971_connect,
+	.disconnect	= k971_disconnect,
+	.log_adapter	= k971_log_adapter,
+};
+
+static int __init kbic_init(void)
+{
+	int rv;
+
+	rv = paride_register(&k951);
+	if (rv < 0)
+		return rv;
+	rv = paride_register(&k971);
+	if (rv < 0)
+		paride_unregister(&k951);
+	return rv;
+}
+
+static void __exit kbic_exit(void)
+{
+	paride_unregister(&k951);
+	paride_unregister(&k971);
+}
+
+MODULE_LICENSE("GPL");
+module_init(kbic_init)
+module_exit(kbic_exit)
diff --git a/drivers/block/paride/ktti.c b/drivers/block/paride/ktti.c
new file mode 100644
index 00000000..117ab0e8
--- /dev/null
+++ b/drivers/block/paride/ktti.c
@@ -0,0 +1,128 @@
+/* 
+        ktti.c        (c) 1998  Grant R. Guenther <grant@torque.net>
+                          Under the terms of the GNU General Public License.
+
+	ktti.c is a low-level protocol driver for the KT Technology
+	parallel port adapter.  This adapter is used in the "PHd" 
+        portable hard-drives.  As far as I can tell, this device
+	supports 4-bit mode _only_.  
+
+*/
+
+#define KTTI_VERSION      "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x10, 0x08 };
+
+static void  ktti_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	int r;
+
+	r = regr + cont_map[cont];
+
+	w0(r); w2(0xb); w2(0xa); w2(3); w2(6); 
+	w0(val); w2(3); w0(0); w2(6); w2(0xb);
+}
+
+static int ktti_read_regr( PIA *pi, int cont, int regr )
+
+{	int  a, b, r;
+
+        r = regr + cont_map[cont];
+
+        w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9); 
+	a = r1(); w2(0xc);  b = r1(); w2(9); w2(0xc); w2(9);
+	return j44(a,b);
+
+}
+
+static void ktti_read_block( PIA *pi, char * buf, int count )
+
+{	int  k, a, b;
+
+	for (k=0;k<count/2;k++) {
+		w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
+		a = r1(); w2(0xc); b = r1(); w2(9);
+		buf[2*k] = j44(a,b);
+		a = r1(); w2(0xc); b = r1(); w2(9);
+		buf[2*k+1] = j44(a,b);
+	}
+}
+
+static void ktti_write_block( PIA *pi, char * buf, int count )
+
+{	int k;
+
+	for (k=0;k<count/2;k++) {
+		w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
+		w0(buf[2*k]); w2(3);
+		w0(buf[2*k+1]); w2(6);
+		w2(0xb);
+	}
+}
+
+static void ktti_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(0xb); w2(0xa); w0(0); w2(3); w2(6);	
+}
+
+static void ktti_disconnect ( PIA *pi )
+
+{       w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
+                pi->device,KTTI_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol ktti = {
+	.owner		= THIS_MODULE,
+	.name		= "ktti",
+	.max_mode	= 1,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= ktti_write_regr,
+	.read_regr	= ktti_read_regr,
+	.write_block	= ktti_write_block,
+	.read_block	= ktti_read_block,
+	.connect	= ktti_connect,
+	.disconnect	= ktti_disconnect,
+	.log_adapter	= ktti_log_adapter,
+};
+
+static int __init ktti_init(void)
+{
+	return paride_register(&ktti);
+}
+
+static void __exit ktti_exit(void)
+{
+	paride_unregister(&ktti);
+}
+
+MODULE_LICENSE("GPL");
+module_init(ktti_init)
+module_exit(ktti_exit)
diff --git a/drivers/block/paride/mkd b/drivers/block/paride/mkd
new file mode 100644
index 00000000..971f099b
--- /dev/null
+++ b/drivers/block/paride/mkd
@@ -0,0 +1,30 @@
+#!/bin/bash
+#
+# mkd -- a script to create the device special files for the PARIDE subsystem
+#
+#  block devices:  	pd (45), pcd (46), pf (47)
+#  character devices:	pt (96), pg (97)
+#
+function mkdev {
+  mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
+}
+#
+function pd {
+  D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
+  mkdev pd$D b 45 $[ $1 * 16 ]
+  for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+  do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
+  done
+}
+#
+cd /dev
+#
+for u in 0 1 2 3 ; do pd $u ; done
+for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done 
+for u in 0 1 2 3 ; do mkdev pf$u  b 47 $u ; done 
+for u in 0 1 2 3 ; do mkdev pt$u  c 96 $u ; done 
+for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done 
+for u in 0 1 2 3 ; do mkdev pg$u  c 97 $u ; done
+#
+# end of mkd
+
diff --git a/drivers/block/paride/on20.c b/drivers/block/paride/on20.c
new file mode 100644
index 00000000..0173697a
--- /dev/null
+++ b/drivers/block/paride/on20.c
@@ -0,0 +1,153 @@
+/* 
+	on20.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
+		            Under the terms of the GNU General Public License.
+
+        on20.c is a low-level protocol driver for the
+        Onspec 90c20 parallel to IDE adapter. 
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define	ON20_VERSION	"1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define op(f)	w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
+#define vl(v)	w2(4);w0(v);w2(5);w2(7);w2(5);w2(4);
+
+#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int on20_read_regr( PIA *pi, int cont, int regr )
+
+{	int h,l, r ;
+
+        r = (regr<<2) + 1 + cont;
+
+        op(1); vl(r); op(0);
+
+	switch (pi->mode)  {
+
+        case 0:  w2(4); w2(6); l = r1();
+                 w2(4); w2(6); h = r1();
+                 w2(4); w2(6); w2(4); w2(6); w2(4);
+		 return j44(l,h);
+
+	case 1:  w2(4); w2(0x26); r = r0(); 
+                 w2(4); w2(0x26); w2(4);
+		 return r;
+
+	}
+	return -1;
+}	
+
+static void on20_write_regr( PIA *pi, int cont, int regr, int val )
+
+{	int r;
+
+	r = (regr<<2) + 1 + cont;
+
+	op(1); vl(r); 
+	op(0); vl(val); 
+	op(0); vl(val);
+}
+
+static void on20_connect ( PIA *pi)
+
+{	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+	w2(4);w0(0);w2(0xc);w2(4);w2(6);w2(4);w2(6);w2(4); 
+	if (pi->mode) { op(2); vl(8); op(2); vl(9); }
+	       else   { op(2); vl(0); op(2); vl(8); }
+}
+
+static void on20_disconnect ( PIA *pi )
+
+{	w2(4);w0(7);w2(4);w2(0xc);w2(4);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void on20_read_block( PIA *pi, char * buf, int count )
+
+{	int     k, l, h; 
+
+	op(1); vl(1); op(0);
+
+	for (k=0;k<count;k++) 
+	    if (pi->mode) {
+		w2(4); w2(0x26); buf[k] = r0();
+	    } else {
+		w2(6); l = r1(); w2(4);
+		w2(6); h = r1(); w2(4);
+		buf[k] = j44(l,h);
+	    }
+	w2(4);
+}
+
+static void on20_write_block(  PIA *pi, char * buf, int count )
+
+{	int	k;
+
+	op(1); vl(1); op(0);
+
+	for (k=0;k<count;k++) { w2(5); w0(buf[k]); w2(7); }
+	w2(4);
+}
+
+static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[2] = {"4-bit","8-bit"};
+
+        printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ",
+                pi->device,ON20_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol on20 = {
+	.owner		= THIS_MODULE,
+	.name		= "on20",
+	.max_mode	= 2,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= on20_write_regr,
+	.read_regr	= on20_read_regr,
+	.write_block	= on20_write_block,
+	.read_block	= on20_read_block,
+	.connect	= on20_connect,
+	.disconnect	= on20_disconnect,
+	.log_adapter	= on20_log_adapter,
+};
+
+static int __init on20_init(void)
+{
+	return paride_register(&on20);
+}
+
+static void __exit on20_exit(void)
+{
+	paride_unregister(&on20);
+}
+
+MODULE_LICENSE("GPL");
+module_init(on20_init)
+module_exit(on20_exit)
diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c
new file mode 100644
index 00000000..95ba2569
--- /dev/null
+++ b/drivers/block/paride/on26.c
@@ -0,0 +1,319 @@
+/* 
+        on26.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+        on26.c is a low-level protocol driver for the 
+        OnSpec 90c26 parallel to IDE adapter chip.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+	1.02    GRG 1998.09.23 updates for the -E rev chip
+	1.03    GRG 1998.12.14 fix for slave drives
+	1.04    GRG 1998.12.20 yet another bug fix
+
+*/
+
+#define ON26_VERSION      "1.04"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes:  0  nybble reads, 8-bit writes
+                1  8-bit reads and writes
+                2  8-bit EPP mode
+		3  EPP-16
+		4  EPP-32
+*/
+
+#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
+
+#define P1	w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
+#define P2	w2(5);w2(7);w2(5);w2(4);
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int on26_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, r;
+
+	r = (regr<<2) + 1 + cont;
+
+        switch (pi->mode)  {
+
+        case 0: w0(1); P1; w0(r); P2; w0(0); P1; 
+		w2(6); a = r1(); w2(4);
+		w2(6); b = r1(); w2(4);
+		w2(6); w2(4); w2(6); w2(4);
+                return j44(a,b);
+
+        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+		w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
+                return a;
+
+	case 2:
+	case 3:
+        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+		w3(0); w3(0); w2(0x24); a = r4(); w2(4);
+		w2(0x24); (void)r4(); w2(4);
+                return a;
+
+        }
+        return -1;
+}       
+
+static void on26_write_regr( PIA *pi, int cont, int regr, int val )
+
+{       int  r;
+
+        r = (regr<<2) + 1 + cont;
+
+        switch (pi->mode)  {
+
+        case 0:
+        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+		w0(val); P2; w0(val); P2;
+		break;
+
+	case 2:
+	case 3:
+        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+		w3(0); w3(0); 
+		w2(5); w4(val); w2(4);
+		w2(5); w4(val); w2(4);
+                break;
+        }
+}
+
+#define  CCP(x)  w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+		 w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void on26_connect ( PIA *pi )
+
+{       int	x;
+
+	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+        CCP(0x20);
+	x = 8; if (pi->mode) x = 9;
+
+	w0(2); P1; w0(8); P2;
+	w0(2); P1; w0(x); P2;
+}
+
+static void on26_disconnect ( PIA *pi )
+
+{       if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
+	              else { w0(4); P1; w0(4); P1; }
+	CCP(0x30);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+#define	RESET_WAIT  200
+
+static int on26_test_port( PIA *pi)  /* hard reset */
+
+{       int     i, m, d, x=0, y=0;
+
+        pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+        d = pi->delay;
+        m = pi->mode;
+        pi->delay = 5;
+        pi->mode = 0;
+
+        w2(0xc);
+
+        CCP(0x30); CCP(0); 
+
+        w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
+        i = ((r1() & 0xf0) << 4); w0(0x87);
+        i |= (r1() & 0xf0); w0(0x78);
+        w0(0x20);w2(4);w2(5);
+        i |= ((r1() & 0xf0) >> 4);
+        w2(4);w0(0xff);
+
+        if (i == 0xb5f) {
+
+            w0(2); P1; w0(0);   P2;
+            w0(3); P1; w0(0);   P2;
+            w0(2); P1; w0(8);   P2; udelay(100);
+            w0(2); P1; w0(0xa); P2; udelay(100);
+            w0(2); P1; w0(8);   P2; udelay(1000);
+            
+            on26_write_regr(pi,0,6,0xa0);
+
+            for (i=0;i<RESET_WAIT;i++) {
+                on26_write_regr(pi,0,6,0xa0);
+                x = on26_read_regr(pi,0,7);
+                on26_write_regr(pi,0,6,0xb0);
+                y = on26_read_regr(pi,0,7);
+                if (!((x&0x80)||(y&0x80))) break;
+                mdelay(100);
+            }
+
+	    if (i == RESET_WAIT) 
+		printk("on26: Device reset failed (%x,%x)\n",x,y);
+
+            w0(4); P1; w0(4); P1;
+        }
+
+        CCP(0x30);
+
+        pi->delay = d;
+        pi->mode = m;
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+
+        return 5;
+}
+
+
+static void on26_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, a, b;
+
+        switch (pi->mode) {
+
+        case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
+		udelay(10);
+		for (k=0;k<count;k++) {
+                        w2(6); a = r1();
+                        w2(4); b = r1();
+                        buf[k] = j44(a,b);
+                }
+		w0(2); P1; w0(8); P2; 
+                break;
+
+        case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+		udelay(10);
+                for (k=0;k<count/2;k++) {
+                        w2(0x26); buf[2*k] = r0();  
+			w2(0x24); buf[2*k+1] = r0();
+                }
+                w0(2); P1; w0(9); P2;
+                break;
+
+        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0x24);
+		udelay(10);
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4);
+                break;
+
+        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0x24);
+                udelay(10);
+                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4);
+                break;
+
+        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0x24);
+                udelay(10);
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4);
+                break;
+
+        }
+}
+
+static void on26_write_block( PIA *pi, char * buf, int count )
+
+{       int	k;
+
+        switch (pi->mode) {
+
+        case 0: 
+        case 1: w0(1); P1; w0(1); P2; 
+		w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
+		udelay(10);
+		for (k=0;k<count/2;k++) {
+                        w2(5); w0(buf[2*k]); 
+			w2(7); w0(buf[2*k+1]);
+                }
+                w2(5); w2(4);
+		w0(2); P1; w0(8+pi->mode); P2;
+                break;
+
+        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0xc5);
+		udelay(10);
+                for (k=0;k<count;k++) w4(buf[k]);
+		w2(0xc4);
+                break;
+
+        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0xc5);
+                udelay(10);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0xc5);
+                udelay(10);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        }
+
+}
+
+static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
+				   "EPP-16","EPP-32"};
+
+        printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
+                pi->device,ON26_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol on26 = {
+	.owner		= THIS_MODULE,
+	.name		= "on26",
+	.max_mode	= 5,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= on26_write_regr,
+	.read_regr	= on26_read_regr,
+	.write_block	= on26_write_block,
+	.read_block	= on26_read_block,
+	.connect	= on26_connect,
+	.disconnect	= on26_disconnect,
+	.test_port	= on26_test_port,
+	.log_adapter	= on26_log_adapter,
+};
+
+static int __init on26_init(void)
+{
+	return paride_register(&on26);
+}
+
+static void __exit on26_exit(void)
+{
+	paride_unregister(&on26);
+}
+
+MODULE_LICENSE("GPL");
+module_init(on26_init)
+module_exit(on26_exit)
diff --git a/drivers/block/paride/paride.c b/drivers/block/paride/paride.c
new file mode 100644
index 00000000..48c50f11
--- /dev/null
+++ b/drivers/block/paride/paride.c
@@ -0,0 +1,434 @@
+/* 
+        paride.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+	This is the base module for the family of device drivers
+        that support parallel port IDE devices.  
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.03	Use spinlocks
+	1.02	GRG 1998.05.05  init_proto, release_proto, ktti
+	1.03	GRG 1998.08.15  eliminate compiler warning
+	1.04    GRG 1998.11.28  added support for FRIQ 
+	1.05    TMW 2000.06.06  use parport_find_number instead of
+				parport_enumerate
+	1.06    TMW 2001.03.26  more sane parport-or-not resource management
+*/
+
+#define PI_VERSION      "1.06"
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h>	/* TASK_* */
+#include <linux/parport.h>
+
+#include "paride.h"
+
+MODULE_LICENSE("GPL");
+
+#define MAX_PROTOS	32
+
+static struct pi_protocol *protocols[MAX_PROTOS];
+
+static DEFINE_SPINLOCK(pi_spinlock);
+
+void pi_write_regr(PIA * pi, int cont, int regr, int val)
+{
+	pi->proto->write_regr(pi, cont, regr, val);
+}
+
+EXPORT_SYMBOL(pi_write_regr);
+
+int pi_read_regr(PIA * pi, int cont, int regr)
+{
+	return pi->proto->read_regr(pi, cont, regr);
+}
+
+EXPORT_SYMBOL(pi_read_regr);
+
+void pi_write_block(PIA * pi, char *buf, int count)
+{
+	pi->proto->write_block(pi, buf, count);
+}
+
+EXPORT_SYMBOL(pi_write_block);
+
+void pi_read_block(PIA * pi, char *buf, int count)
+{
+	pi->proto->read_block(pi, buf, count);
+}
+
+EXPORT_SYMBOL(pi_read_block);
+
+static void pi_wake_up(void *p)
+{
+	PIA *pi = (PIA *) p;
+	unsigned long flags;
+	void (*cont) (void) = NULL;
+
+	spin_lock_irqsave(&pi_spinlock, flags);
+
+	if (pi->claim_cont && !parport_claim(pi->pardev)) {
+		cont = pi->claim_cont;
+		pi->claim_cont = NULL;
+		pi->claimed = 1;
+	}
+
+	spin_unlock_irqrestore(&pi_spinlock, flags);
+
+	wake_up(&(pi->parq));
+
+	if (cont)
+		cont();
+}
+
+int pi_schedule_claimed(PIA * pi, void (*cont) (void))
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pi_spinlock, flags);
+	if (pi->pardev && parport_claim(pi->pardev)) {
+		pi->claim_cont = cont;
+		spin_unlock_irqrestore(&pi_spinlock, flags);
+		return 0;
+	}
+	pi->claimed = 1;
+	spin_unlock_irqrestore(&pi_spinlock, flags);
+	return 1;
+}
+EXPORT_SYMBOL(pi_schedule_claimed);
+
+void pi_do_claimed(PIA * pi, void (*cont) (void))
+{
+	if (pi_schedule_claimed(pi, cont))
+		cont();
+}
+
+EXPORT_SYMBOL(pi_do_claimed);
+
+static void pi_claim(PIA * pi)
+{
+	if (pi->claimed)
+		return;
+	pi->claimed = 1;
+	if (pi->pardev)
+		wait_event(pi->parq,
+			   !parport_claim((struct pardevice *) pi->pardev));
+}
+
+static void pi_unclaim(PIA * pi)
+{
+	pi->claimed = 0;
+	if (pi->pardev)
+		parport_release((struct pardevice *) (pi->pardev));
+}
+
+void pi_connect(PIA * pi)
+{
+	pi_claim(pi);
+	pi->proto->connect(pi);
+}
+
+EXPORT_SYMBOL(pi_connect);
+
+void pi_disconnect(PIA * pi)
+{
+	pi->proto->disconnect(pi);
+	pi_unclaim(pi);
+}
+
+EXPORT_SYMBOL(pi_disconnect);
+
+static void pi_unregister_parport(PIA * pi)
+{
+	if (pi->pardev) {
+		parport_unregister_device((struct pardevice *) (pi->pardev));
+		pi->pardev = NULL;
+	}
+}
+
+void pi_release(PIA * pi)
+{
+	pi_unregister_parport(pi);
+	if (pi->proto->release_proto)
+		pi->proto->release_proto(pi);
+	module_put(pi->proto->owner);
+}
+
+EXPORT_SYMBOL(pi_release);
+
+static int default_test_proto(PIA * pi, char *scratch, int verbose)
+{
+	int j, k;
+	int e[2] = { 0, 0 };
+
+	pi->proto->connect(pi);
+
+	for (j = 0; j < 2; j++) {
+		pi_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			pi_write_regr(pi, 0, 2, k ^ 0xaa);
+			pi_write_regr(pi, 0, 3, k ^ 0x55);
+			if (pi_read_regr(pi, 0, 2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
+	pi->proto->disconnect(pi);
+
+	if (verbose)
+		printk("%s: %s: port 0x%x, mode  %d, test=(%d,%d)\n",
+		       pi->device, pi->proto->name, pi->port,
+		       pi->mode, e[0], e[1]);
+
+	return (e[0] && e[1]);	/* not here if both > 0 */
+}
+
+static int pi_test_proto(PIA * pi, char *scratch, int verbose)
+{
+	int res;
+
+	pi_claim(pi);
+	if (pi->proto->test_proto)
+		res = pi->proto->test_proto(pi, scratch, verbose);
+	else
+		res = default_test_proto(pi, scratch, verbose);
+	pi_unclaim(pi);
+
+	return res;
+}
+
+int paride_register(PIP * pr)
+{
+	int k;
+
+	for (k = 0; k < MAX_PROTOS; k++)
+		if (protocols[k] && !strcmp(pr->name, protocols[k]->name)) {
+			printk("paride: %s protocol already registered\n",
+			       pr->name);
+			return -1;
+		}
+	k = 0;
+	while ((k < MAX_PROTOS) && (protocols[k]))
+		k++;
+	if (k == MAX_PROTOS) {
+		printk("paride: protocol table full\n");
+		return -1;
+	}
+	protocols[k] = pr;
+	pr->index = k;
+	printk("paride: %s registered as protocol %d\n", pr->name, k);
+	return 0;
+}
+
+EXPORT_SYMBOL(paride_register);
+
+void paride_unregister(PIP * pr)
+{
+	if (!pr)
+		return;
+	if (protocols[pr->index] != pr) {
+		printk("paride: %s not registered\n", pr->name);
+		return;
+	}
+	protocols[pr->index] = NULL;
+}
+
+EXPORT_SYMBOL(paride_unregister);
+
+static int pi_register_parport(PIA * pi, int verbose)
+{
+	struct parport *port;
+
+	port = parport_find_base(pi->port);
+	if (!port)
+		return 0;
+
+	pi->pardev = parport_register_device(port,
+					     pi->device, NULL,
+					     pi_wake_up, NULL, 0, (void *) pi);
+	parport_put_port(port);
+	if (!pi->pardev)
+		return 0;
+
+	init_waitqueue_head(&pi->parq);
+
+	if (verbose)
+		printk("%s: 0x%x is %s\n", pi->device, pi->port, port->name);
+
+	pi->parname = (char *) port->name;
+
+	return 1;
+}
+
+static int pi_probe_mode(PIA * pi, int max, char *scratch, int verbose)
+{
+	int best, range;
+
+	if (pi->mode != -1) {
+		if (pi->mode >= max)
+			return 0;
+		range = 3;
+		if (pi->mode >= pi->proto->epp_first)
+			range = 8;
+		if ((range == 8) && (pi->port % 8))
+			return 0;
+		pi->reserved = range;
+		return (!pi_test_proto(pi, scratch, verbose));
+	}
+	best = -1;
+	for (pi->mode = 0; pi->mode < max; pi->mode++) {
+		range = 3;
+		if (pi->mode >= pi->proto->epp_first)
+			range = 8;
+		if ((range == 8) && (pi->port % 8))
+			break;
+		pi->reserved = range;
+		if (!pi_test_proto(pi, scratch, verbose))
+			best = pi->mode;
+	}
+	pi->mode = best;
+	return (best > -1);
+}
+
+static int pi_probe_unit(PIA * pi, int unit, char *scratch, int verbose)
+{
+	int max, s, e;
+
+	s = unit;
+	e = s + 1;
+
+	if (s == -1) {
+		s = 0;
+		e = pi->proto->max_units;
+	}
+
+	if (!pi_register_parport(pi, verbose))
+		return 0;
+
+	if (pi->proto->test_port) {
+		pi_claim(pi);
+		max = pi->proto->test_port(pi);
+		pi_unclaim(pi);
+	} else
+		max = pi->proto->max_mode;
+
+	if (pi->proto->probe_unit) {
+		pi_claim(pi);
+		for (pi->unit = s; pi->unit < e; pi->unit++)
+			if (pi->proto->probe_unit(pi)) {
+				pi_unclaim(pi);
+				if (pi_probe_mode(pi, max, scratch, verbose))
+					return 1;
+				pi_unregister_parport(pi);
+				return 0;
+			}
+		pi_unclaim(pi);
+		pi_unregister_parport(pi);
+		return 0;
+	}
+
+	if (!pi_probe_mode(pi, max, scratch, verbose)) {
+		pi_unregister_parport(pi);
+		return 0;
+	}
+	return 1;
+
+}
+
+int pi_init(PIA * pi, int autoprobe, int port, int mode,
+	int unit, int protocol, int delay, char *scratch,
+	int devtype, int verbose, char *device)
+{
+	int p, k, s, e;
+	int lpts[7] = { 0x3bc, 0x378, 0x278, 0x268, 0x27c, 0x26c, 0 };
+
+	s = protocol;
+	e = s + 1;
+
+	if (!protocols[0])
+		request_module("paride_protocol");
+
+	if (autoprobe) {
+		s = 0;
+		e = MAX_PROTOS;
+	} else if ((s < 0) || (s >= MAX_PROTOS) || (port <= 0) ||
+		   (!protocols[s]) || (unit < 0) ||
+		   (unit >= protocols[s]->max_units)) {
+		printk("%s: Invalid parameters\n", device);
+		return 0;
+	}
+
+	for (p = s; p < e; p++) {
+		struct pi_protocol *proto = protocols[p];
+		if (!proto)
+			continue;
+		/* still racy */
+		if (!try_module_get(proto->owner))
+			continue;
+		pi->proto = proto;
+		pi->private = 0;
+		if (proto->init_proto && proto->init_proto(pi) < 0) {
+			pi->proto = NULL;
+			module_put(proto->owner);
+			continue;
+		}
+		if (delay == -1)
+			pi->delay = pi->proto->default_delay;
+		else
+			pi->delay = delay;
+		pi->devtype = devtype;
+		pi->device = device;
+
+		pi->parname = NULL;
+		pi->pardev = NULL;
+		init_waitqueue_head(&pi->parq);
+		pi->claimed = 0;
+		pi->claim_cont = NULL;
+
+		pi->mode = mode;
+		if (port != -1) {
+			pi->port = port;
+			if (pi_probe_unit(pi, unit, scratch, verbose))
+				break;
+			pi->port = 0;
+		} else {
+			k = 0;
+			while ((pi->port = lpts[k++]))
+				if (pi_probe_unit
+				    (pi, unit, scratch, verbose))
+					break;
+			if (pi->port)
+				break;
+		}
+		if (pi->proto->release_proto)
+			pi->proto->release_proto(pi);
+		module_put(proto->owner);
+	}
+
+	if (!pi->port) {
+		if (autoprobe)
+			printk("%s: Autoprobe failed\n", device);
+		else
+			printk("%s: Adapter not found\n", device);
+		return 0;
+	}
+
+	if (pi->parname)
+		printk("%s: Sharing %s at 0x%x\n", pi->device,
+		       pi->parname, pi->port);
+
+	pi->proto->log_adapter(pi, scratch, verbose);
+
+	return 1;
+}
+
+EXPORT_SYMBOL(pi_init);
diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h
new file mode 100644
index 00000000..2bddbf45
--- /dev/null
+++ b/drivers/block/paride/paride.h
@@ -0,0 +1,170 @@
+#ifndef __DRIVERS_PARIDE_H__
+#define __DRIVERS_PARIDE_H__
+
+/* 
+	paride.h	(c) 1997-8  Grant R. Guenther <grant@torque.net>
+   		                    Under the terms of the GPL.
+
+   This file defines the interface between the high-level parallel
+   IDE device drivers (pd, pf, pcd, pt) and the adapter chips.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.05	init_proto, release_proto
+*/
+
+#define PARIDE_H_VERSION 	"1.01"
+
+/* Some adapters need to know what kind of device they are in
+
+   Values for devtype:
+*/
+
+#define	PI_PD	0	/* IDE disk */
+#define PI_PCD	1	/* ATAPI CDrom */
+#define PI_PF   2	/* ATAPI disk */
+#define PI_PT	3	/* ATAPI tape */
+#define PI_PG   4       /* ATAPI generic */
+
+/* The paride module contains no state, instead the drivers allocate
+   a pi_adapter data structure and pass it to paride in every operation.
+
+*/
+
+struct pi_adapter  {
+
+	struct pi_protocol *proto;   /* adapter protocol */
+	int	port;		     /* base address of parallel port */
+	int	mode;		     /* transfer mode in use */
+	int     delay;		     /* adapter delay setting */
+	int	devtype;	     /* device type: PI_PD etc. */
+	char    *device;	     /* name of driver */
+	int     unit;		     /* unit number for chained adapters */
+	int	saved_r0;	     /* saved port state */
+	int	saved_r2;	     /* saved port state */
+	int	reserved;	     /* number of ports reserved */
+	unsigned long	private;     /* for protocol module */
+
+	wait_queue_head_t parq;     /* semaphore for parport sharing */
+	void	*pardev;	     /* pointer to pardevice */
+	char	*parname;	     /* parport name */
+	int	claimed;	     /* parport has already been claimed */
+	void (*claim_cont)(void);    /* continuation for parport wait */
+};
+
+typedef struct pi_adapter PIA;
+
+/* functions exported by paride to the high level drivers */
+
+extern int pi_init(PIA *pi, 
+	int autoprobe,		/* 1 to autoprobe */
+	int port, 		/* base port address */
+	int mode, 		/* -1 for autoprobe */
+	int unit,		/* unit number, if supported */
+	int protocol, 		/* protocol to use */
+	int delay, 		/* -1 to use adapter specific default */
+	char * scratch, 	/* address of 512 byte buffer */
+	int devtype,		/* device type: PI_PD, PI_PCD, etc ... */
+	int verbose,		/* log verbose data while probing */
+	char *device		/* name of the driver */
+	);			/* returns 0 on failure, 1 on success */
+
+extern void pi_release(PIA *pi);
+
+/* registers are addressed as (cont,regr)
+
+       	cont: 0 for command register file, 1 for control register(s)
+	regr: 0-7 for register number.
+
+*/
+
+extern void pi_write_regr(PIA *pi, int cont, int regr, int val);
+
+extern int pi_read_regr(PIA *pi, int cont, int regr);
+
+extern void pi_write_block(PIA *pi, char * buf, int count);
+
+extern void pi_read_block(PIA *pi, char * buf, int count);
+
+extern void pi_connect(PIA *pi);
+
+extern void pi_disconnect(PIA *pi);
+
+extern void pi_do_claimed(PIA *pi, void (*cont)(void));
+extern int pi_schedule_claimed(PIA *pi, void (*cont)(void));
+
+/* macros and functions exported to the protocol modules */
+
+#define delay_p			(pi->delay?udelay(pi->delay):(void)0)
+#define out_p(offs,byte)	outb(byte,pi->port+offs); delay_p;
+#define in_p(offs)		(delay_p,inb(pi->port+offs))
+
+#define w0(byte)                {out_p(0,byte);}
+#define r0()                    (in_p(0) & 0xff)
+#define w1(byte)                {out_p(1,byte);}
+#define r1()                    (in_p(1) & 0xff)
+#define w2(byte)                {out_p(2,byte);}
+#define r2()                    (in_p(2) & 0xff)
+#define w3(byte)                {out_p(3,byte);}
+#define w4(byte)                {out_p(4,byte);}
+#define r4()                    (in_p(4) & 0xff)
+#define w4w(data)     		{outw(data,pi->port+4); delay_p;}
+#define w4l(data)     		{outl(data,pi->port+4); delay_p;}
+#define r4w()         		(delay_p,inw(pi->port+4)&0xffff)
+#define r4l()         		(delay_p,inl(pi->port+4)&0xffffffff)
+
+static inline u16 pi_swab16( char *b, int k)
+
+{ 	union { u16 u; char t[2]; } r;
+
+	r.t[0]=b[2*k+1]; r.t[1]=b[2*k];
+        return r.u;
+}
+
+static inline u32 pi_swab32( char *b, int k)
+
+{ 	union { u32 u; char f[4]; } r;
+
+	r.f[0]=b[4*k+1]; r.f[1]=b[4*k];
+	r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2];
+        return r.u;
+}
+
+struct pi_protocol {
+
+	char	name[8];	/* name for this protocol */
+	int	index;		/* index into protocol table */
+
+	int	max_mode;	/* max mode number */
+	int	epp_first;	/* modes >= this use 8 ports */
+	
+	int	default_delay;  /* delay parameter if not specified */
+	int	max_units;	/* max chained units probed for */
+
+	void (*write_regr)(PIA *,int,int,int);
+	int  (*read_regr)(PIA *,int,int);
+	void (*write_block)(PIA *,char *,int);
+	void (*read_block)(PIA *,char *,int);
+
+	void (*connect)(PIA *);
+	void (*disconnect)(PIA *);
+	
+	int  (*test_port)(PIA *);
+	int  (*probe_unit)(PIA *);
+	int  (*test_proto)(PIA *,char *,int);
+	void (*log_adapter)(PIA *,char *,int);
+	
+	int (*init_proto)(PIA *);
+	void (*release_proto)(PIA *);
+	struct module *owner;
+};
+
+typedef struct pi_protocol PIP;
+
+extern int paride_register( PIP * );
+extern void paride_unregister ( PIP * );
+
+#endif /* __DRIVERS_PARIDE_H__ */
+/* end of paride.h */
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
new file mode 100644
index 00000000..ba2b6b5e
--- /dev/null
+++ b/drivers/block/paride/pcd.c
@@ -0,0 +1,992 @@
+/* 
+	pcd.c	(c) 1997-8  Grant R. Guenther <grant@torque.net>
+		            Under the terms of the GNU General Public License.
+
+	This is a high-level driver for parallel port ATAPI CD-ROM
+        drives based on chips supported by the paride module.
+
+        By default, the driver will autoprobe for a single parallel
+        port ATAPI CD-ROM drive, but if their individual parameters are
+        specified, the driver can handle up to 4 drives.
+
+        The behaviour of the pcd driver can be altered by setting
+        some parameters from the insmod command line.  The following
+        parameters are adjustable:
+
+            drive0      These four arguments can be arrays of       
+            drive1      1-6 integers as follows:
+            drive2
+            drive3      <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
+
+                        Where,
+
+                <prt>   is the base of the parallel port address for
+                        the corresponding drive.  (required)
+
+                <pro>   is the protocol number for the adapter that
+                        supports this drive.  These numbers are
+                        logged by 'paride' when the protocol modules
+                        are initialised.  (0 if not given)
+
+                <uni>   for those adapters that support chained
+                        devices, this is the unit selector for the
+                        chain of devices on the given port.  It should
+                        be zero for devices that don't support chaining.
+                        (0 if not given)
+
+                <mod>   this can be -1 to choose the best mode, or one
+                        of the mode numbers supported by the adapter.
+                        (-1 if not given)
+
+		<slv>   ATAPI CD-ROMs can be jumpered to master or slave.
+			Set this to 0 to choose the master drive, 1 to
+                        choose the slave, -1 (the default) to choose the
+			first drive found.
+
+                <dly>   some parallel ports require the driver to 
+                        go more slowly.  -1 sets a default value that
+                        should work with the chosen protocol.  Otherwise,
+                        set this to a small integer, the larger it is
+                        the slower the port i/o.  In some cases, setting
+                        this to zero will speed up the device. (default -1)
+                        
+            major       You may use this parameter to overide the
+                        default major number (46) that this driver
+                        will use.  Be sure to change the device
+                        name as well.
+
+            name        This parameter is a character string that
+                        contains the name the kernel will use for this
+                        device (in /proc output, for instance).
+                        (default "pcd")
+
+            verbose     This parameter controls the amount of logging
+                        that the driver will do.  Set it to 0 for
+                        normal operation, 1 to see autoprobe progress
+                        messages, or 2 to see additional debugging
+                        output.  (default 0)
+  
+            nice        This parameter controls the driver's use of
+                        idle CPU time, at the expense of some speed.
+ 
+	If this driver is built into the kernel, you can use kernel
+        the following command line parameters, with the same values
+        as the corresponding module parameters listed above:
+
+	    pcd.drive0
+	    pcd.drive1
+	    pcd.drive2
+	    pcd.drive3
+	    pcd.nice
+
+        In addition, you can use the parameter pcd.disable to disable
+        the driver entirely.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.01.24	Added test unit ready support
+	1.02    GRG 1998.05.06  Changes to pcd_completion, ready_wait,
+				and loosen interpretation of ATAPI
+			        standard for clearing error status.
+				Use spinlocks. Eliminate sti().
+	1.03    GRG 1998.06.16  Eliminated an Ugh
+	1.04	GRG 1998.08.15  Added extra debugging, improvements to
+				pcd_completion, use HZ in loop timing
+	1.05	GRG 1998.08.16	Conformed to "Uniform CD-ROM" standard
+	1.06    GRG 1998.08.19  Added audio ioctl support
+	1.07    GRG 1998.09.24  Increased reset timeout, added jumbo support
+
+*/
+
+#define	PCD_VERSION	"1.07"
+#define PCD_MAJOR	46
+#define PCD_NAME	"pcd"
+#define PCD_UNITS	4
+
+/* Here are things one can override from the insmod command.
+   Most are autoprobed by paride unless set here.  Verbose is off
+   by default.
+
+*/
+
+static int verbose = 0;
+static int major = PCD_MAJOR;
+static char *name = PCD_NAME;
+static int nice = 0;
+static int disable = 0;
+
+static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
+
+static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
+static int pcd_drive_count;
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/cdrom.h>
+#include <linux/spinlock.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <asm/uaccess.h>
+
+static DEFINE_MUTEX(pcd_mutex);
+static DEFINE_SPINLOCK(pcd_lock);
+
+module_param(verbose, int, 0644);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param(nice, int, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+#include "pseudo.h"
+
+#define PCD_RETRIES	     5
+#define PCD_TMO		   800	/* timeout in jiffies */
+#define PCD_DELAY           50	/* spin delay in uS */
+#define PCD_READY_TMO	    20	/* in seconds */
+#define PCD_RESET_TMO	   100	/* in tenths of a second */
+
+#define PCD_SPIN	(1000000*PCD_TMO)/(HZ*PCD_DELAY)
+
+#define IDE_ERR		0x01
+#define IDE_DRQ         0x08
+#define IDE_READY       0x40
+#define IDE_BUSY        0x80
+
+static int pcd_open(struct cdrom_device_info *cdi, int purpose);
+static void pcd_release(struct cdrom_device_info *cdi);
+static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr);
+static unsigned int pcd_check_events(struct cdrom_device_info *cdi,
+				     unsigned int clearing, int slot_nr);
+static int pcd_tray_move(struct cdrom_device_info *cdi, int position);
+static int pcd_lock_door(struct cdrom_device_info *cdi, int lock);
+static int pcd_drive_reset(struct cdrom_device_info *cdi);
+static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn);
+static int pcd_audio_ioctl(struct cdrom_device_info *cdi,
+			   unsigned int cmd, void *arg);
+static int pcd_packet(struct cdrom_device_info *cdi,
+		      struct packet_command *cgc);
+
+static int pcd_detect(void);
+static void pcd_probe_capabilities(void);
+static void do_pcd_read_drq(void);
+static void do_pcd_request(struct request_queue * q);
+static void do_pcd_read(void);
+
+struct pcd_unit {
+	struct pi_adapter pia;	/* interface to paride layer */
+	struct pi_adapter *pi;
+	int drive;		/* master/slave */
+	int last_sense;		/* result of last request sense */
+	int changed;		/* media change seen */
+	int present;		/* does this unit exist ? */
+	char *name;		/* pcd0, pcd1, etc */
+	struct cdrom_device_info info;	/* uniform cdrom interface */
+	struct gendisk *disk;
+};
+
+static struct pcd_unit pcd[PCD_UNITS];
+
+static char pcd_scratch[64];
+static char pcd_buffer[2048];	/* raw block buffer */
+static int pcd_bufblk = -1;	/* block in buffer, in CD units,
+				   -1 for nothing there. See also
+				   pd_unit.
+				 */
+
+/* the variables below are used mainly in the I/O request engine, which
+   processes only one request at a time.
+*/
+
+static struct pcd_unit *pcd_current; /* current request's drive */
+static struct request *pcd_req;
+static int pcd_retries;		/* retries on current request */
+static int pcd_busy;		/* request being processed ? */
+static int pcd_sector;		/* address of next requested sector */
+static int pcd_count;		/* number of blocks still to do */
+static char *pcd_buf;		/* buffer for request in progress */
+
+/* kernel glue structures */
+
+static int pcd_block_open(struct block_device *bdev, fmode_t mode)
+{
+	struct pcd_unit *cd = bdev->bd_disk->private_data;
+	int ret;
+
+	mutex_lock(&pcd_mutex);
+	ret = cdrom_open(&cd->info, bdev, mode);
+	mutex_unlock(&pcd_mutex);
+
+	return ret;
+}
+
+static int pcd_block_release(struct gendisk *disk, fmode_t mode)
+{
+	struct pcd_unit *cd = disk->private_data;
+	mutex_lock(&pcd_mutex);
+	cdrom_release(&cd->info, mode);
+	mutex_unlock(&pcd_mutex);
+	return 0;
+}
+
+static int pcd_block_ioctl(struct block_device *bdev, fmode_t mode,
+				unsigned cmd, unsigned long arg)
+{
+	struct pcd_unit *cd = bdev->bd_disk->private_data;
+	int ret;
+
+	mutex_lock(&pcd_mutex);
+	ret = cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
+	mutex_unlock(&pcd_mutex);
+
+	return ret;
+}
+
+static unsigned int pcd_block_check_events(struct gendisk *disk,
+					   unsigned int clearing)
+{
+	struct pcd_unit *cd = disk->private_data;
+	return cdrom_check_events(&cd->info, clearing);
+}
+
+static const struct block_device_operations pcd_bdops = {
+	.owner		= THIS_MODULE,
+	.open		= pcd_block_open,
+	.release	= pcd_block_release,
+	.ioctl		= pcd_block_ioctl,
+	.check_events	= pcd_block_check_events,
+};
+
+static struct cdrom_device_ops pcd_dops = {
+	.open		= pcd_open,
+	.release	= pcd_release,
+	.drive_status	= pcd_drive_status,
+	.check_events	= pcd_check_events,
+	.tray_move	= pcd_tray_move,
+	.lock_door	= pcd_lock_door,
+	.get_mcn	= pcd_get_mcn,
+	.reset		= pcd_drive_reset,
+	.audio_ioctl	= pcd_audio_ioctl,
+	.generic_packet	= pcd_packet,
+	.capability	= CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
+			  CDC_MCN | CDC_MEDIA_CHANGED | CDC_RESET |
+			  CDC_PLAY_AUDIO | CDC_GENERIC_PACKET | CDC_CD_R |
+			  CDC_CD_RW,
+};
+
+static void pcd_init_units(void)
+{
+	struct pcd_unit *cd;
+	int unit;
+
+	pcd_drive_count = 0;
+	for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
+		struct gendisk *disk = alloc_disk(1);
+		if (!disk)
+			continue;
+		cd->disk = disk;
+		cd->pi = &cd->pia;
+		cd->present = 0;
+		cd->last_sense = 0;
+		cd->changed = 1;
+		cd->drive = (*drives[unit])[D_SLV];
+		if ((*drives[unit])[D_PRT])
+			pcd_drive_count++;
+
+		cd->name = &cd->info.name[0];
+		snprintf(cd->name, sizeof(cd->info.name), "%s%d", name, unit);
+		cd->info.ops = &pcd_dops;
+		cd->info.handle = cd;
+		cd->info.speed = 0;
+		cd->info.capacity = 1;
+		cd->info.mask = 0;
+		disk->major = major;
+		disk->first_minor = unit;
+		strcpy(disk->disk_name, cd->name);	/* umm... */
+		disk->fops = &pcd_bdops;
+		disk->flags = GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE;
+	}
+}
+
+static int pcd_open(struct cdrom_device_info *cdi, int purpose)
+{
+	struct pcd_unit *cd = cdi->handle;
+	if (!cd->present)
+		return -ENODEV;
+	return 0;
+}
+
+static void pcd_release(struct cdrom_device_info *cdi)
+{
+}
+
+static inline int status_reg(struct pcd_unit *cd)
+{
+	return pi_read_regr(cd->pi, 1, 6);
+}
+
+static inline int read_reg(struct pcd_unit *cd, int reg)
+{
+	return pi_read_regr(cd->pi, 0, reg);
+}
+
+static inline void write_reg(struct pcd_unit *cd, int reg, int val)
+{
+	pi_write_regr(cd->pi, 0, reg, val);
+}
+
+static int pcd_wait(struct pcd_unit *cd, int go, int stop, char *fun, char *msg)
+{
+	int j, r, e, s, p;
+
+	j = 0;
+	while ((((r = status_reg(cd)) & go) || (stop && (!(r & stop))))
+	       && (j++ < PCD_SPIN))
+		udelay(PCD_DELAY);
+
+	if ((r & (IDE_ERR & stop)) || (j > PCD_SPIN)) {
+		s = read_reg(cd, 7);
+		e = read_reg(cd, 1);
+		p = read_reg(cd, 2);
+		if (j > PCD_SPIN)
+			e |= 0x100;
+		if (fun)
+			printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
+			       " loop=%d phase=%d\n",
+			       cd->name, fun, msg, r, s, e, j, p);
+		return (s << 8) + r;
+	}
+	return 0;
+}
+
+static int pcd_command(struct pcd_unit *cd, char *cmd, int dlen, char *fun)
+{
+	pi_connect(cd->pi);
+
+	write_reg(cd, 6, 0xa0 + 0x10 * cd->drive);
+
+	if (pcd_wait(cd, IDE_BUSY | IDE_DRQ, 0, fun, "before command")) {
+		pi_disconnect(cd->pi);
+		return -1;
+	}
+
+	write_reg(cd, 4, dlen % 256);
+	write_reg(cd, 5, dlen / 256);
+	write_reg(cd, 7, 0xa0);	/* ATAPI packet command */
+
+	if (pcd_wait(cd, IDE_BUSY, IDE_DRQ, fun, "command DRQ")) {
+		pi_disconnect(cd->pi);
+		return -1;
+	}
+
+	if (read_reg(cd, 2) != 1) {
+		printk("%s: %s: command phase error\n", cd->name, fun);
+		pi_disconnect(cd->pi);
+		return -1;
+	}
+
+	pi_write_block(cd->pi, cmd, 12);
+
+	return 0;
+}
+
+static int pcd_completion(struct pcd_unit *cd, char *buf, char *fun)
+{
+	int r, d, p, n, k, j;
+
+	r = -1;
+	k = 0;
+	j = 0;
+
+	if (!pcd_wait(cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR,
+		      fun, "completion")) {
+		r = 0;
+		while (read_reg(cd, 7) & IDE_DRQ) {
+			d = read_reg(cd, 4) + 256 * read_reg(cd, 5);
+			n = (d + 3) & 0xfffc;
+			p = read_reg(cd, 2) & 3;
+
+			if ((p == 2) && (n > 0) && (j == 0)) {
+				pi_read_block(cd->pi, buf, n);
+				if (verbose > 1)
+					printk("%s: %s: Read %d bytes\n",
+					       cd->name, fun, n);
+				r = 0;
+				j++;
+			} else {
+				if (verbose > 1)
+					printk
+					    ("%s: %s: Unexpected phase %d, d=%d, k=%d\n",
+					     cd->name, fun, p, d, k);
+				if (verbose < 2)
+					printk_once(
+					    "%s: WARNING: ATAPI phase errors\n",
+					    cd->name);
+				mdelay(1);
+			}
+			if (k++ > PCD_TMO) {
+				printk("%s: Stuck DRQ\n", cd->name);
+				break;
+			}
+			if (pcd_wait
+			    (cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR, fun,
+			     "completion")) {
+				r = -1;
+				break;
+			}
+		}
+	}
+
+	pi_disconnect(cd->pi);
+
+	return r;
+}
+
+static void pcd_req_sense(struct pcd_unit *cd, char *fun)
+{
+	char rs_cmd[12] = { 0x03, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
+	char buf[16];
+	int r, c;
+
+	r = pcd_command(cd, rs_cmd, 16, "Request sense");
+	mdelay(1);
+	if (!r)
+		pcd_completion(cd, buf, "Request sense");
+
+	cd->last_sense = -1;
+	c = 2;
+	if (!r) {
+		if (fun)
+			printk("%s: %s: Sense key: %x, ASC: %x, ASQ: %x\n",
+			       cd->name, fun, buf[2] & 0xf, buf[12], buf[13]);
+		c = buf[2] & 0xf;
+		cd->last_sense =
+		    c | ((buf[12] & 0xff) << 8) | ((buf[13] & 0xff) << 16);
+	}
+	if ((c == 2) || (c == 6))
+		cd->changed = 1;
+}
+
+static int pcd_atapi(struct pcd_unit *cd, char *cmd, int dlen, char *buf, char *fun)
+{
+	int r;
+
+	r = pcd_command(cd, cmd, dlen, fun);
+	mdelay(1);
+	if (!r)
+		r = pcd_completion(cd, buf, fun);
+	if (r)
+		pcd_req_sense(cd, fun);
+
+	return r;
+}
+
+static int pcd_packet(struct cdrom_device_info *cdi, struct packet_command *cgc)
+{
+	return pcd_atapi(cdi->handle, cgc->cmd, cgc->buflen, cgc->buffer,
+			 "generic packet");
+}
+
+#define DBMSG(msg)	((verbose>1)?(msg):NULL)
+
+static unsigned int pcd_check_events(struct cdrom_device_info *cdi,
+				     unsigned int clearing, int slot_nr)
+{
+	struct pcd_unit *cd = cdi->handle;
+	int res = cd->changed;
+	if (res)
+		cd->changed = 0;
+	return res ? DISK_EVENT_MEDIA_CHANGE : 0;
+}
+
+static int pcd_lock_door(struct cdrom_device_info *cdi, int lock)
+{
+	char un_cmd[12] = { 0x1e, 0, 0, 0, lock, 0, 0, 0, 0, 0, 0, 0 };
+
+	return pcd_atapi(cdi->handle, un_cmd, 0, pcd_scratch,
+			 lock ? "lock door" : "unlock door");
+}
+
+static int pcd_tray_move(struct cdrom_device_info *cdi, int position)
+{
+	char ej_cmd[12] = { 0x1b, 0, 0, 0, 3 - position, 0, 0, 0, 0, 0, 0, 0 };
+
+	return pcd_atapi(cdi->handle, ej_cmd, 0, pcd_scratch,
+			 position ? "eject" : "close tray");
+}
+
+static void pcd_sleep(int cs)
+{
+	schedule_timeout_interruptible(cs);
+}
+
+static int pcd_reset(struct pcd_unit *cd)
+{
+	int i, k, flg;
+	int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+
+	pi_connect(cd->pi);
+	write_reg(cd, 6, 0xa0 + 0x10 * cd->drive);
+	write_reg(cd, 7, 8);
+
+	pcd_sleep(20 * HZ / 1000);	/* delay a bit */
+
+	k = 0;
+	while ((k++ < PCD_RESET_TMO) && (status_reg(cd) & IDE_BUSY))
+		pcd_sleep(HZ / 10);
+
+	flg = 1;
+	for (i = 0; i < 5; i++)
+		flg &= (read_reg(cd, i + 1) == expect[i]);
+
+	if (verbose) {
+		printk("%s: Reset (%d) signature = ", cd->name, k);
+		for (i = 0; i < 5; i++)
+			printk("%3x", read_reg(cd, i + 1));
+		if (!flg)
+			printk(" (incorrect)");
+		printk("\n");
+	}
+
+	pi_disconnect(cd->pi);
+	return flg - 1;
+}
+
+static int pcd_drive_reset(struct cdrom_device_info *cdi)
+{
+	return pcd_reset(cdi->handle);
+}
+
+static int pcd_ready_wait(struct pcd_unit *cd, int tmo)
+{
+	char tr_cmd[12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+	int k, p;
+
+	k = 0;
+	while (k < tmo) {
+		cd->last_sense = 0;
+		pcd_atapi(cd, tr_cmd, 0, NULL, DBMSG("test unit ready"));
+		p = cd->last_sense;
+		if (!p)
+			return 0;
+		if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6)))
+			return p;
+		k++;
+		pcd_sleep(HZ);
+	}
+	return 0x000020;	/* timeout */
+}
+
+static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
+{
+	char rc_cmd[12] = { 0x25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+	struct pcd_unit *cd = cdi->handle;
+
+	if (pcd_ready_wait(cd, PCD_READY_TMO))
+		return CDS_DRIVE_NOT_READY;
+	if (pcd_atapi(cd, rc_cmd, 8, pcd_scratch, DBMSG("check media")))
+		return CDS_NO_DISC;
+	return CDS_DISC_OK;
+}
+
+static int pcd_identify(struct pcd_unit *cd, char *id)
+{
+	int k, s;
+	char id_cmd[12] = { 0x12, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+
+	pcd_bufblk = -1;
+
+	s = pcd_atapi(cd, id_cmd, 36, pcd_buffer, "identify");
+
+	if (s)
+		return -1;
+	if ((pcd_buffer[0] & 0x1f) != 5) {
+		if (verbose)
+			printk("%s: %s is not a CD-ROM\n",
+			       cd->name, cd->drive ? "Slave" : "Master");
+		return -1;
+	}
+	memcpy(id, pcd_buffer + 16, 16);
+	id[16] = 0;
+	k = 16;
+	while ((k >= 0) && (id[k] <= 0x20)) {
+		id[k] = 0;
+		k--;
+	}
+
+	printk("%s: %s: %s\n", cd->name, cd->drive ? "Slave" : "Master", id);
+
+	return 0;
+}
+
+/*
+ * returns  0, with id set if drive is detected
+ *	    -1, if drive detection failed
+ */
+static int pcd_probe(struct pcd_unit *cd, int ms, char *id)
+{
+	if (ms == -1) {
+		for (cd->drive = 0; cd->drive <= 1; cd->drive++)
+			if (!pcd_reset(cd) && !pcd_identify(cd, id))
+				return 0;
+	} else {
+		cd->drive = ms;
+		if (!pcd_reset(cd) && !pcd_identify(cd, id))
+			return 0;
+	}
+	return -1;
+}
+
+static void pcd_probe_capabilities(void)
+{
+	int unit, r;
+	char buffer[32];
+	char cmd[12] = { 0x5a, 1 << 3, 0x2a, 0, 0, 0, 0, 18, 0, 0, 0, 0 };
+	struct pcd_unit *cd;
+
+	for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
+		if (!cd->present)
+			continue;
+		r = pcd_atapi(cd, cmd, 18, buffer, "mode sense capabilities");
+		if (r)
+			continue;
+		/* we should now have the cap page */
+		if ((buffer[11] & 1) == 0)
+			cd->info.mask |= CDC_CD_R;
+		if ((buffer[11] & 2) == 0)
+			cd->info.mask |= CDC_CD_RW;
+		if ((buffer[12] & 1) == 0)
+			cd->info.mask |= CDC_PLAY_AUDIO;
+		if ((buffer[14] & 1) == 0)
+			cd->info.mask |= CDC_LOCK;
+		if ((buffer[14] & 8) == 0)
+			cd->info.mask |= CDC_OPEN_TRAY;
+		if ((buffer[14] >> 6) == 0)
+			cd->info.mask |= CDC_CLOSE_TRAY;
+	}
+}
+
+static int pcd_detect(void)
+{
+	char id[18];
+	int k, unit;
+	struct pcd_unit *cd;
+
+	printk("%s: %s version %s, major %d, nice %d\n",
+	       name, name, PCD_VERSION, major, nice);
+
+	k = 0;
+	if (pcd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
+		cd = pcd;
+		if (pi_init(cd->pi, 1, -1, -1, -1, -1, -1, pcd_buffer,
+			    PI_PCD, verbose, cd->name)) {
+			if (!pcd_probe(cd, -1, id) && cd->disk) {
+				cd->present = 1;
+				k++;
+			} else
+				pi_release(cd->pi);
+		}
+	} else {
+		for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
+			int *conf = *drives[unit];
+			if (!conf[D_PRT])
+				continue;
+			if (!pi_init(cd->pi, 0, conf[D_PRT], conf[D_MOD],
+				     conf[D_UNI], conf[D_PRO], conf[D_DLY],
+				     pcd_buffer, PI_PCD, verbose, cd->name)) 
+				continue;
+			if (!pcd_probe(cd, conf[D_SLV], id) && cd->disk) {
+				cd->present = 1;
+				k++;
+			} else
+				pi_release(cd->pi);
+		}
+	}
+	if (k)
+		return 0;
+
+	printk("%s: No CD-ROM drive found\n", name);
+	for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++)
+		put_disk(cd->disk);
+	return -1;
+}
+
+/* I/O request processing */
+static struct request_queue *pcd_queue;
+
+static void do_pcd_request(struct request_queue * q)
+{
+	if (pcd_busy)
+		return;
+	while (1) {
+		if (!pcd_req) {
+			pcd_req = blk_fetch_request(q);
+			if (!pcd_req)
+				return;
+		}
+
+		if (rq_data_dir(pcd_req) == READ) {
+			struct pcd_unit *cd = pcd_req->rq_disk->private_data;
+			if (cd != pcd_current)
+				pcd_bufblk = -1;
+			pcd_current = cd;
+			pcd_sector = blk_rq_pos(pcd_req);
+			pcd_count = blk_rq_cur_sectors(pcd_req);
+			pcd_buf = pcd_req->buffer;
+			pcd_busy = 1;
+			ps_set_intr(do_pcd_read, NULL, 0, nice);
+			return;
+		} else {
+			__blk_end_request_all(pcd_req, -EIO);
+			pcd_req = NULL;
+		}
+	}
+}
+
+static inline void next_request(int err)
+{
+	unsigned long saved_flags;
+
+	spin_lock_irqsave(&pcd_lock, saved_flags);
+	if (!__blk_end_request_cur(pcd_req, err))
+		pcd_req = NULL;
+	pcd_busy = 0;
+	do_pcd_request(pcd_queue);
+	spin_unlock_irqrestore(&pcd_lock, saved_flags);
+}
+
+static int pcd_ready(void)
+{
+	return (((status_reg(pcd_current) & (IDE_BUSY | IDE_DRQ)) == IDE_DRQ));
+}
+
+static void pcd_transfer(void)
+{
+
+	while (pcd_count && (pcd_sector / 4 == pcd_bufblk)) {
+		int o = (pcd_sector % 4) * 512;
+		memcpy(pcd_buf, pcd_buffer + o, 512);
+		pcd_count--;
+		pcd_buf += 512;
+		pcd_sector++;
+	}
+}
+
+static void pcd_start(void)
+{
+	int b, i;
+	char rd_cmd[12] = { 0xa8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 };
+
+	pcd_bufblk = pcd_sector / 4;
+	b = pcd_bufblk;
+	for (i = 0; i < 4; i++) {
+		rd_cmd[5 - i] = b & 0xff;
+		b = b >> 8;
+	}
+
+	if (pcd_command(pcd_current, rd_cmd, 2048, "read block")) {
+		pcd_bufblk = -1;
+		next_request(-EIO);
+		return;
+	}
+
+	mdelay(1);
+
+	ps_set_intr(do_pcd_read_drq, pcd_ready, PCD_TMO, nice);
+}
+
+static void do_pcd_read(void)
+{
+	pcd_busy = 1;
+	pcd_retries = 0;
+	pcd_transfer();
+	if (!pcd_count) {
+		next_request(0);
+		return;
+	}
+
+	pi_do_claimed(pcd_current->pi, pcd_start);
+}
+
+static void do_pcd_read_drq(void)
+{
+	unsigned long saved_flags;
+
+	if (pcd_completion(pcd_current, pcd_buffer, "read block")) {
+		if (pcd_retries < PCD_RETRIES) {
+			mdelay(1);
+			pcd_retries++;
+			pi_do_claimed(pcd_current->pi, pcd_start);
+			return;
+		}
+		pcd_bufblk = -1;
+		next_request(-EIO);
+		return;
+	}
+
+	do_pcd_read();
+	spin_lock_irqsave(&pcd_lock, saved_flags);
+	do_pcd_request(pcd_queue);
+	spin_unlock_irqrestore(&pcd_lock, saved_flags);
+}
+
+/* the audio_ioctl stuff is adapted from sr_ioctl.c */
+
+static int pcd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg)
+{
+	struct pcd_unit *cd = cdi->handle;
+
+	switch (cmd) {
+
+	case CDROMREADTOCHDR:
+
+		{
+			char cmd[12] =
+			    { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12,
+			 0, 0, 0 };
+			struct cdrom_tochdr *tochdr =
+			    (struct cdrom_tochdr *) arg;
+			char buffer[32];
+			int r;
+
+			r = pcd_atapi(cd, cmd, 12, buffer, "read toc header");
+
+			tochdr->cdth_trk0 = buffer[2];
+			tochdr->cdth_trk1 = buffer[3];
+
+			return r ? -EIO : 0;
+		}
+
+	case CDROMREADTOCENTRY:
+
+		{
+			char cmd[12] =
+			    { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12,
+			 0, 0, 0 };
+
+			struct cdrom_tocentry *tocentry =
+			    (struct cdrom_tocentry *) arg;
+			unsigned char buffer[32];
+			int r;
+
+			cmd[1] =
+			    (tocentry->cdte_format == CDROM_MSF ? 0x02 : 0);
+			cmd[6] = tocentry->cdte_track;
+
+			r = pcd_atapi(cd, cmd, 12, buffer, "read toc entry");
+
+			tocentry->cdte_ctrl = buffer[5] & 0xf;
+			tocentry->cdte_adr = buffer[5] >> 4;
+			tocentry->cdte_datamode =
+			    (tocentry->cdte_ctrl & 0x04) ? 1 : 0;
+			if (tocentry->cdte_format == CDROM_MSF) {
+				tocentry->cdte_addr.msf.minute = buffer[9];
+				tocentry->cdte_addr.msf.second = buffer[10];
+				tocentry->cdte_addr.msf.frame = buffer[11];
+			} else
+				tocentry->cdte_addr.lba =
+				    (((((buffer[8] << 8) + buffer[9]) << 8)
+				      + buffer[10]) << 8) + buffer[11];
+
+			return r ? -EIO : 0;
+		}
+
+	default:
+
+		return -ENOSYS;
+	}
+}
+
+static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
+{
+	char cmd[12] =
+	    { GPCMD_READ_SUBCHANNEL, 0, 0x40, 2, 0, 0, 0, 0, 24, 0, 0, 0 };
+	char buffer[32];
+
+	if (pcd_atapi(cdi->handle, cmd, 24, buffer, "get mcn"))
+		return -EIO;
+
+	memcpy(mcn->medium_catalog_number, buffer + 9, 13);
+	mcn->medium_catalog_number[13] = 0;
+
+	return 0;
+}
+
+static int __init pcd_init(void)
+{
+	struct pcd_unit *cd;
+	int unit;
+
+	if (disable)
+		return -EINVAL;
+
+	pcd_init_units();
+
+	if (pcd_detect())
+		return -ENODEV;
+
+	/* get the atapi capabilities page */
+	pcd_probe_capabilities();
+
+	if (register_blkdev(major, name)) {
+		for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++)
+			put_disk(cd->disk);
+		return -EBUSY;
+	}
+
+	pcd_queue = blk_init_queue(do_pcd_request, &pcd_lock);
+	if (!pcd_queue) {
+		unregister_blkdev(major, name);
+		for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++)
+			put_disk(cd->disk);
+		return -ENOMEM;
+	}
+
+	for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
+		if (cd->present) {
+			register_cdrom(&cd->info);
+			cd->disk->private_data = cd;
+			cd->disk->queue = pcd_queue;
+			add_disk(cd->disk);
+		}
+	}
+
+	return 0;
+}
+
+static void __exit pcd_exit(void)
+{
+	struct pcd_unit *cd;
+	int unit;
+
+	for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
+		if (cd->present) {
+			del_gendisk(cd->disk);
+			pi_release(cd->pi);
+			unregister_cdrom(&cd->info);
+		}
+		put_disk(cd->disk);
+	}
+	blk_cleanup_queue(pcd_queue);
+	unregister_blkdev(major, name);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pcd_init)
+module_exit(pcd_exit)
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
new file mode 100644
index 00000000..831e3ac1
--- /dev/null
+++ b/drivers/block/paride/pd.c
@@ -0,0 +1,958 @@
+/* 
+        pd.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                            Under the terms of the GNU General Public License.
+
+        This is the high-level driver for parallel port IDE hard
+        drives based on chips supported by the paride module.
+
+	By default, the driver will autoprobe for a single parallel
+	port IDE drive, but if their individual parameters are
+        specified, the driver can handle up to 4 drives.
+
+        The behaviour of the pd driver can be altered by setting
+        some parameters from the insmod command line.  The following
+        parameters are adjustable:
+ 
+	    drive0  	These four arguments can be arrays of	    
+	    drive1	1-8 integers as follows:
+	    drive2
+	    drive3	<prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
+
+			Where,
+
+		<prt>	is the base of the parallel port address for
+			the corresponding drive.  (required)
+
+		<pro>   is the protocol number for the adapter that
+			supports this drive.  These numbers are
+                        logged by 'paride' when the protocol modules
+			are initialised.  (0 if not given)
+
+		<uni>   for those adapters that support chained
+			devices, this is the unit selector for the
+		        chain of devices on the given port.  It should
+			be zero for devices that don't support chaining.
+			(0 if not given)
+
+		<mod>   this can be -1 to choose the best mode, or one
+		        of the mode numbers supported by the adapter.
+			(-1 if not given)
+
+		<geo>   this defaults to 0 to indicate that the driver
+			should use the CHS geometry provided by the drive
+			itself.  If set to 1, the driver will provide
+			a logical geometry with 64 heads and 32 sectors
+			per track, to be consistent with most SCSI
+		        drivers.  (0 if not given)
+
+		<sby>   set this to zero to disable the power saving
+			standby mode, if needed.  (1 if not given)
+
+		<dly>   some parallel ports require the driver to 
+			go more slowly.  -1 sets a default value that
+			should work with the chosen protocol.  Otherwise,
+			set this to a small integer, the larger it is
+			the slower the port i/o.  In some cases, setting
+			this to zero will speed up the device. (default -1)
+
+		<slv>   IDE disks can be jumpered to master or slave.
+                        Set this to 0 to choose the master drive, 1 to
+                        choose the slave, -1 (the default) to choose the
+                        first drive found.
+			
+
+            major       You may use this parameter to overide the
+                        default major number (45) that this driver
+                        will use.  Be sure to change the device
+                        name as well.
+
+            name        This parameter is a character string that
+                        contains the name the kernel will use for this
+                        device (in /proc output, for instance).
+			(default "pd")
+
+	    cluster	The driver will attempt to aggregate requests
+			for adjacent blocks into larger multi-block
+			clusters.  The maximum cluster size (in 512
+			byte sectors) is set with this parameter.
+			(default 64)
+
+	    verbose	This parameter controls the amount of logging
+			that the driver will do.  Set it to 0 for 
+			normal operation, 1 to see autoprobe progress
+			messages, or 2 to see additional debugging
+			output.  (default 0)
+
+            nice        This parameter controls the driver's use of
+                        idle CPU time, at the expense of some speed.
+
+        If this driver is built into the kernel, you can use kernel
+        the following command line parameters, with the same values
+        as the corresponding module parameters listed above:
+
+            pd.drive0
+            pd.drive1
+            pd.drive2
+            pd.drive3
+            pd.cluster
+            pd.nice
+
+        In addition, you can use the parameter pd.disable to disable
+        the driver entirely.
+ 
+*/
+
+/* Changes:
+
+	1.01	GRG 1997.01.24	Restored pd_reset()
+				Added eject ioctl
+	1.02    GRG 1998.05.06  SMP spinlock changes, 
+				Added slave support
+	1.03    GRG 1998.06.16  Eliminate an Ugh.
+	1.04	GRG 1998.08.15  Extra debugging, use HZ in loop timing
+	1.05    GRG 1998.09.24  Added jumbo support
+
+*/
+
+#define PD_VERSION      "1.05"
+#define PD_MAJOR	45
+#define PD_NAME		"pd"
+#define PD_UNITS	4
+
+/* Here are things one can override from the insmod command.
+   Most are autoprobed by paride unless set here.  Verbose is off
+   by default.
+
+*/
+#include <linux/types.h>
+
+static bool verbose = 0;
+static int major = PD_MAJOR;
+static char *name = PD_NAME;
+static int cluster = 64;
+static int nice = 0;
+static int disable = 0;
+
+static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+
+static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
+
+/* end of parameters */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/cdrom.h>	/* for the eject ioctl */
+#include <linux/blkdev.h>
+#include <linux/blkpg.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <asm/uaccess.h>
+#include <linux/workqueue.h>
+
+static DEFINE_MUTEX(pd_mutex);
+static DEFINE_SPINLOCK(pd_lock);
+
+module_param(verbose, bool, 0);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param(cluster, int, 0);
+module_param(nice, int, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+
+#define PD_BITS    4
+
+/* numbers for "SCSI" geometry */
+
+#define PD_LOG_HEADS    64
+#define PD_LOG_SECTS    32
+
+#define PD_ID_OFF       54
+#define PD_ID_LEN       14
+
+#define PD_MAX_RETRIES  5
+#define PD_TMO          800	/* interrupt timeout in jiffies */
+#define PD_SPIN_DEL     50	/* spin delay in micro-seconds  */
+
+#define PD_SPIN         (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
+
+#define STAT_ERR        0x00001
+#define STAT_INDEX      0x00002
+#define STAT_ECC        0x00004
+#define STAT_DRQ        0x00008
+#define STAT_SEEK       0x00010
+#define STAT_WRERR      0x00020
+#define STAT_READY      0x00040
+#define STAT_BUSY       0x00080
+
+#define ERR_AMNF        0x00100
+#define ERR_TK0NF       0x00200
+#define ERR_ABRT        0x00400
+#define ERR_MCR         0x00800
+#define ERR_IDNF        0x01000
+#define ERR_MC          0x02000
+#define ERR_UNC         0x04000
+#define ERR_TMO         0x10000
+
+#define IDE_READ        	0x20
+#define IDE_WRITE       	0x30
+#define IDE_READ_VRFY		0x40
+#define IDE_INIT_DEV_PARMS	0x91
+#define IDE_STANDBY     	0x96
+#define IDE_ACKCHANGE   	0xdb
+#define IDE_DOORLOCK    	0xde
+#define IDE_DOORUNLOCK  	0xdf
+#define IDE_IDENTIFY    	0xec
+#define IDE_EJECT		0xed
+
+#define PD_NAMELEN	8
+
+struct pd_unit {
+	struct pi_adapter pia;	/* interface to paride layer */
+	struct pi_adapter *pi;
+	int access;		/* count of active opens ... */
+	int capacity;		/* Size of this volume in sectors */
+	int heads;		/* physical geometry */
+	int sectors;
+	int cylinders;
+	int can_lba;
+	int drive;		/* master=0 slave=1 */
+	int changed;		/* Have we seen a disk change ? */
+	int removable;		/* removable media device  ?  */
+	int standby;
+	int alt_geom;
+	char name[PD_NAMELEN];	/* pda, pdb, etc ... */
+	struct gendisk *gd;
+};
+
+static struct pd_unit pd[PD_UNITS];
+
+static char pd_scratch[512];	/* scratch block buffer */
+
+static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
+	"READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
+	"IDNF", "MC", "UNC", "???", "TMO"
+};
+
+static inline int status_reg(struct pd_unit *disk)
+{
+	return pi_read_regr(disk->pi, 1, 6);
+}
+
+static inline int read_reg(struct pd_unit *disk, int reg)
+{
+	return pi_read_regr(disk->pi, 0, reg);
+}
+
+static inline void write_status(struct pd_unit *disk, int val)
+{
+	pi_write_regr(disk->pi, 1, 6, val);
+}
+
+static inline void write_reg(struct pd_unit *disk, int reg, int val)
+{
+	pi_write_regr(disk->pi, 0, reg, val);
+}
+
+static inline u8 DRIVE(struct pd_unit *disk)
+{
+	return 0xa0+0x10*disk->drive;
+}
+
+/*  ide command interface */
+
+static void pd_print_error(struct pd_unit *disk, char *msg, int status)
+{
+	int i;
+
+	printk("%s: %s: status = 0x%x =", disk->name, msg, status);
+	for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
+		if (status & (1 << i))
+			printk(" %s", pd_errs[i]);
+	printk("\n");
+}
+
+static void pd_reset(struct pd_unit *disk)
+{				/* called only for MASTER drive */
+	write_status(disk, 4);
+	udelay(50);
+	write_status(disk, 0);
+	udelay(250);
+}
+
+#define DBMSG(msg)	((verbose>1)?(msg):NULL)
+
+static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
+{				/* polled wait */
+	int k, r, e;
+
+	k = 0;
+	while (k < PD_SPIN) {
+		r = status_reg(disk);
+		k++;
+		if (((r & w) == w) && !(r & STAT_BUSY))
+			break;
+		udelay(PD_SPIN_DEL);
+	}
+	e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
+	if (k >= PD_SPIN)
+		e |= ERR_TMO;
+	if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
+		pd_print_error(disk, msg, e);
+	return e;
+}
+
+static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
+{
+	write_reg(disk, 6, DRIVE(disk) + h);
+	write_reg(disk, 1, 0);		/* the IDE task file */
+	write_reg(disk, 2, n);
+	write_reg(disk, 3, s);
+	write_reg(disk, 4, c0);
+	write_reg(disk, 5, c1);
+	write_reg(disk, 7, func);
+
+	udelay(1);
+}
+
+static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
+{
+	int c1, c0, h, s;
+
+	if (disk->can_lba) {
+		s = block & 255;
+		c0 = (block >>= 8) & 255;
+		c1 = (block >>= 8) & 255;
+		h = ((block >>= 8) & 15) + 0x40;
+	} else {
+		s = (block % disk->sectors) + 1;
+		h = (block /= disk->sectors) % disk->heads;
+		c0 = (block /= disk->heads) % 256;
+		c1 = (block >>= 8);
+	}
+	pd_send_command(disk, count, s, h, c0, c1, func);
+}
+
+/* The i/o request engine */
+
+enum action {Fail = 0, Ok = 1, Hold, Wait};
+
+static struct request *pd_req;	/* current request */
+static enum action (*phase)(void);
+
+static void run_fsm(void);
+
+static void ps_tq_int(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
+
+static void schedule_fsm(void)
+{
+	if (!nice)
+		schedule_delayed_work(&fsm_tq, 0);
+	else
+		schedule_delayed_work(&fsm_tq, nice-1);
+}
+
+static void ps_tq_int(struct work_struct *work)
+{
+	run_fsm();
+}
+
+static enum action do_pd_io_start(void);
+static enum action pd_special(void);
+static enum action do_pd_read_start(void);
+static enum action do_pd_write_start(void);
+static enum action do_pd_read_drq(void);
+static enum action do_pd_write_done(void);
+
+static struct request_queue *pd_queue;
+static int pd_claimed;
+
+static struct pd_unit *pd_current; /* current request's drive */
+static PIA *pi_current; /* current request's PIA */
+
+static void run_fsm(void)
+{
+	while (1) {
+		enum action res;
+		unsigned long saved_flags;
+		int stop = 0;
+
+		if (!phase) {
+			pd_current = pd_req->rq_disk->private_data;
+			pi_current = pd_current->pi;
+			phase = do_pd_io_start;
+		}
+
+		switch (pd_claimed) {
+			case 0:
+				pd_claimed = 1;
+				if (!pi_schedule_claimed(pi_current, run_fsm))
+					return;
+			case 1:
+				pd_claimed = 2;
+				pi_current->proto->connect(pi_current);
+		}
+
+		switch(res = phase()) {
+			case Ok: case Fail:
+				pi_disconnect(pi_current);
+				pd_claimed = 0;
+				phase = NULL;
+				spin_lock_irqsave(&pd_lock, saved_flags);
+				if (!__blk_end_request_cur(pd_req,
+						res == Ok ? 0 : -EIO)) {
+					pd_req = blk_fetch_request(pd_queue);
+					if (!pd_req)
+						stop = 1;
+				}
+				spin_unlock_irqrestore(&pd_lock, saved_flags);
+				if (stop)
+					return;
+			case Hold:
+				schedule_fsm();
+				return;
+			case Wait:
+				pi_disconnect(pi_current);
+				pd_claimed = 0;
+		}
+	}
+}
+
+static int pd_retries = 0;	/* i/o error retry count */
+static int pd_block;		/* address of next requested block */
+static int pd_count;		/* number of blocks still to do */
+static int pd_run;		/* sectors in current cluster */
+static int pd_cmd;		/* current command READ/WRITE */
+static char *pd_buf;		/* buffer for request in progress */
+
+static enum action do_pd_io_start(void)
+{
+	if (pd_req->cmd_type == REQ_TYPE_SPECIAL) {
+		phase = pd_special;
+		return pd_special();
+	}
+
+	pd_cmd = rq_data_dir(pd_req);
+	if (pd_cmd == READ || pd_cmd == WRITE) {
+		pd_block = blk_rq_pos(pd_req);
+		pd_count = blk_rq_cur_sectors(pd_req);
+		if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
+			return Fail;
+		pd_run = blk_rq_sectors(pd_req);
+		pd_buf = pd_req->buffer;
+		pd_retries = 0;
+		if (pd_cmd == READ)
+			return do_pd_read_start();
+		else
+			return do_pd_write_start();
+	}
+	return Fail;
+}
+
+static enum action pd_special(void)
+{
+	enum action (*func)(struct pd_unit *) = pd_req->special;
+	return func(pd_current);
+}
+
+static int pd_next_buf(void)
+{
+	unsigned long saved_flags;
+
+	pd_count--;
+	pd_run--;
+	pd_buf += 512;
+	pd_block++;
+	if (!pd_run)
+		return 1;
+	if (pd_count)
+		return 0;
+	spin_lock_irqsave(&pd_lock, saved_flags);
+	__blk_end_request_cur(pd_req, 0);
+	pd_count = blk_rq_cur_sectors(pd_req);
+	pd_buf = pd_req->buffer;
+	spin_unlock_irqrestore(&pd_lock, saved_flags);
+	return 0;
+}
+
+static unsigned long pd_timeout;
+
+static enum action do_pd_read_start(void)
+{
+	if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
+		if (pd_retries < PD_MAX_RETRIES) {
+			pd_retries++;
+			return Wait;
+		}
+		return Fail;
+	}
+	pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
+	phase = do_pd_read_drq;
+	pd_timeout = jiffies + PD_TMO;
+	return Hold;
+}
+
+static enum action do_pd_write_start(void)
+{
+	if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
+		if (pd_retries < PD_MAX_RETRIES) {
+			pd_retries++;
+			return Wait;
+		}
+		return Fail;
+	}
+	pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
+	while (1) {
+		if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
+			if (pd_retries < PD_MAX_RETRIES) {
+				pd_retries++;
+				return Wait;
+			}
+			return Fail;
+		}
+		pi_write_block(pd_current->pi, pd_buf, 512);
+		if (pd_next_buf())
+			break;
+	}
+	phase = do_pd_write_done;
+	pd_timeout = jiffies + PD_TMO;
+	return Hold;
+}
+
+static inline int pd_ready(void)
+{
+	return !(status_reg(pd_current) & STAT_BUSY);
+}
+
+static enum action do_pd_read_drq(void)
+{
+	if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
+		return Hold;
+
+	while (1) {
+		if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
+			if (pd_retries < PD_MAX_RETRIES) {
+				pd_retries++;
+				phase = do_pd_read_start;
+				return Wait;
+			}
+			return Fail;
+		}
+		pi_read_block(pd_current->pi, pd_buf, 512);
+		if (pd_next_buf())
+			break;
+	}
+	return Ok;
+}
+
+static enum action do_pd_write_done(void)
+{
+	if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
+		return Hold;
+
+	if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
+		if (pd_retries < PD_MAX_RETRIES) {
+			pd_retries++;
+			phase = do_pd_write_start;
+			return Wait;
+		}
+		return Fail;
+	}
+	return Ok;
+}
+
+/* special io requests */
+
+/* According to the ATA standard, the default CHS geometry should be
+   available following a reset.  Some Western Digital drives come up
+   in a mode where only LBA addresses are accepted until the device
+   parameters are initialised.
+*/
+
+static void pd_init_dev_parms(struct pd_unit *disk)
+{
+	pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
+	pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
+			IDE_INIT_DEV_PARMS);
+	udelay(300);
+	pd_wait_for(disk, 0, "Initialise device parameters");
+}
+
+static enum action pd_door_lock(struct pd_unit *disk)
+{
+	if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
+		pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
+		pd_wait_for(disk, STAT_READY, "Lock done");
+	}
+	return Ok;
+}
+
+static enum action pd_door_unlock(struct pd_unit *disk)
+{
+	if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
+		pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
+		pd_wait_for(disk, STAT_READY, "Lock done");
+	}
+	return Ok;
+}
+
+static enum action pd_eject(struct pd_unit *disk)
+{
+	pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
+	pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
+	pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
+	pd_wait_for(disk, 0, DBMSG("before eject"));
+	pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
+	pd_wait_for(disk, 0, DBMSG("after eject"));
+	return Ok;
+}
+
+static enum action pd_media_check(struct pd_unit *disk)
+{
+	int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
+	if (!(r & STAT_ERR)) {
+		pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
+		r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
+	} else
+		disk->changed = 1;	/* say changed if other error */
+	if (r & ERR_MC) {
+		disk->changed = 1;
+		pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
+		pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
+		pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
+		r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
+	}
+	return Ok;
+}
+
+static void pd_standby_off(struct pd_unit *disk)
+{
+	pd_wait_for(disk, 0, DBMSG("before STANDBY"));
+	pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
+	pd_wait_for(disk, 0, DBMSG("after STANDBY"));
+}
+
+static enum action pd_identify(struct pd_unit *disk)
+{
+	int j;
+	char id[PD_ID_LEN + 1];
+
+/* WARNING:  here there may be dragons.  reset() applies to both drives,
+   but we call it only on probing the MASTER. This should allow most
+   common configurations to work, but be warned that a reset can clear
+   settings on the SLAVE drive.
+*/
+
+	if (disk->drive == 0)
+		pd_reset(disk);
+
+	write_reg(disk, 6, DRIVE(disk));
+	pd_wait_for(disk, 0, DBMSG("before IDENT"));
+	pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
+
+	if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
+		return Fail;
+	pi_read_block(disk->pi, pd_scratch, 512);
+	disk->can_lba = pd_scratch[99] & 2;
+	disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
+	disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
+	disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
+	if (disk->can_lba)
+		disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
+	else
+		disk->capacity = disk->sectors * disk->heads * disk->cylinders;
+
+	for (j = 0; j < PD_ID_LEN; j++)
+		id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
+	j = PD_ID_LEN - 1;
+	while ((j >= 0) && (id[j] <= 0x20))
+		j--;
+	j++;
+	id[j] = 0;
+
+	disk->removable = pd_scratch[0] & 0x80;
+
+	printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
+	       disk->name, id,
+	       disk->drive ? "slave" : "master",
+	       disk->capacity, disk->capacity / 2048,
+	       disk->cylinders, disk->heads, disk->sectors,
+	       disk->removable ? "removable" : "fixed");
+
+	if (disk->capacity)
+		pd_init_dev_parms(disk);
+	if (!disk->standby)
+		pd_standby_off(disk);
+
+	return Ok;
+}
+
+/* end of io request engine */
+
+static void do_pd_request(struct request_queue * q)
+{
+	if (pd_req)
+		return;
+	pd_req = blk_fetch_request(q);
+	if (!pd_req)
+		return;
+
+	schedule_fsm();
+}
+
+static int pd_special_command(struct pd_unit *disk,
+		      enum action (*func)(struct pd_unit *disk))
+{
+	struct request *rq;
+	int err = 0;
+
+	rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT);
+
+	rq->cmd_type = REQ_TYPE_SPECIAL;
+	rq->special = func;
+
+	err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
+
+	blk_put_request(rq);
+	return err;
+}
+
+/* kernel glue structures */
+
+static int pd_open(struct block_device *bdev, fmode_t mode)
+{
+	struct pd_unit *disk = bdev->bd_disk->private_data;
+
+	mutex_lock(&pd_mutex);
+	disk->access++;
+
+	if (disk->removable) {
+		pd_special_command(disk, pd_media_check);
+		pd_special_command(disk, pd_door_lock);
+	}
+	mutex_unlock(&pd_mutex);
+	return 0;
+}
+
+static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+	struct pd_unit *disk = bdev->bd_disk->private_data;
+
+	if (disk->alt_geom) {
+		geo->heads = PD_LOG_HEADS;
+		geo->sectors = PD_LOG_SECTS;
+		geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
+	} else {
+		geo->heads = disk->heads;
+		geo->sectors = disk->sectors;
+		geo->cylinders = disk->cylinders;
+	}
+
+	return 0;
+}
+
+static int pd_ioctl(struct block_device *bdev, fmode_t mode,
+	 unsigned int cmd, unsigned long arg)
+{
+	struct pd_unit *disk = bdev->bd_disk->private_data;
+
+	switch (cmd) {
+	case CDROMEJECT:
+		mutex_lock(&pd_mutex);
+		if (disk->access == 1)
+			pd_special_command(disk, pd_eject);
+		mutex_unlock(&pd_mutex);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int pd_release(struct gendisk *p, fmode_t mode)
+{
+	struct pd_unit *disk = p->private_data;
+
+	mutex_lock(&pd_mutex);
+	if (!--disk->access && disk->removable)
+		pd_special_command(disk, pd_door_unlock);
+	mutex_unlock(&pd_mutex);
+
+	return 0;
+}
+
+static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
+{
+	struct pd_unit *disk = p->private_data;
+	int r;
+	if (!disk->removable)
+		return 0;
+	pd_special_command(disk, pd_media_check);
+	r = disk->changed;
+	disk->changed = 0;
+	return r ? DISK_EVENT_MEDIA_CHANGE : 0;
+}
+
+static int pd_revalidate(struct gendisk *p)
+{
+	struct pd_unit *disk = p->private_data;
+	if (pd_special_command(disk, pd_identify) == 0)
+		set_capacity(p, disk->capacity);
+	else
+		set_capacity(p, 0);
+	return 0;
+}
+
+static const struct block_device_operations pd_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pd_open,
+	.release	= pd_release,
+	.ioctl		= pd_ioctl,
+	.getgeo		= pd_getgeo,
+	.check_events	= pd_check_events,
+	.revalidate_disk= pd_revalidate
+};
+
+/* probing */
+
+static void pd_probe_drive(struct pd_unit *disk)
+{
+	struct gendisk *p = alloc_disk(1 << PD_BITS);
+	if (!p)
+		return;
+	strcpy(p->disk_name, disk->name);
+	p->fops = &pd_fops;
+	p->major = major;
+	p->first_minor = (disk - pd) << PD_BITS;
+	disk->gd = p;
+	p->private_data = disk;
+	p->queue = pd_queue;
+
+	if (disk->drive == -1) {
+		for (disk->drive = 0; disk->drive <= 1; disk->drive++)
+			if (pd_special_command(disk, pd_identify) == 0)
+				return;
+	} else if (pd_special_command(disk, pd_identify) == 0)
+		return;
+	disk->gd = NULL;
+	put_disk(p);
+}
+
+static int pd_detect(void)
+{
+	int found = 0, unit, pd_drive_count = 0;
+	struct pd_unit *disk;
+
+	for (unit = 0; unit < PD_UNITS; unit++) {
+		int *parm = *drives[unit];
+		struct pd_unit *disk = pd + unit;
+		disk->pi = &disk->pia;
+		disk->access = 0;
+		disk->changed = 1;
+		disk->capacity = 0;
+		disk->drive = parm[D_SLV];
+		snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
+		disk->alt_geom = parm[D_GEO];
+		disk->standby = parm[D_SBY];
+		if (parm[D_PRT])
+			pd_drive_count++;
+	}
+
+	if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
+		disk = pd;
+		if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
+			    PI_PD, verbose, disk->name)) {
+			pd_probe_drive(disk);
+			if (!disk->gd)
+				pi_release(disk->pi);
+		}
+
+	} else {
+		for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
+			int *parm = *drives[unit];
+			if (!parm[D_PRT])
+				continue;
+			if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
+				     parm[D_UNI], parm[D_PRO], parm[D_DLY],
+				     pd_scratch, PI_PD, verbose, disk->name)) {
+				pd_probe_drive(disk);
+				if (!disk->gd)
+					pi_release(disk->pi);
+			}
+		}
+	}
+	for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
+		if (disk->gd) {
+			set_capacity(disk->gd, disk->capacity);
+			add_disk(disk->gd);
+			found = 1;
+		}
+	}
+	if (!found)
+		printk("%s: no valid drive found\n", name);
+	return found;
+}
+
+static int __init pd_init(void)
+{
+	if (disable)
+		goto out1;
+
+	pd_queue = blk_init_queue(do_pd_request, &pd_lock);
+	if (!pd_queue)
+		goto out1;
+
+	blk_queue_max_hw_sectors(pd_queue, cluster);
+
+	if (register_blkdev(major, name))
+		goto out2;
+
+	printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
+	       name, name, PD_VERSION, major, cluster, nice);
+	if (!pd_detect())
+		goto out3;
+
+	return 0;
+
+out3:
+	unregister_blkdev(major, name);
+out2:
+	blk_cleanup_queue(pd_queue);
+out1:
+	return -ENODEV;
+}
+
+static void __exit pd_exit(void)
+{
+	struct pd_unit *disk;
+	int unit;
+	unregister_blkdev(major, name);
+	for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
+		struct gendisk *p = disk->gd;
+		if (p) {
+			disk->gd = NULL;
+			del_gendisk(p);
+			put_disk(p);
+			pi_release(disk->pi);
+		}
+	}
+	blk_cleanup_queue(pd_queue);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pd_init)
+module_exit(pd_exit)
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
new file mode 100644
index 00000000..ec8f9ed6
--- /dev/null
+++ b/drivers/block/paride/pf.c
@@ -0,0 +1,1008 @@
+/* 
+        pf.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                            Under the terms of the GNU General Public License.
+
+        This is the high-level driver for parallel port ATAPI disk
+        drives based on chips supported by the paride module.
+
+        By default, the driver will autoprobe for a single parallel
+        port ATAPI disk drive, but if their individual parameters are
+        specified, the driver can handle up to 4 drives.
+
+        The behaviour of the pf driver can be altered by setting
+        some parameters from the insmod command line.  The following
+        parameters are adjustable:
+
+            drive0      These four arguments can be arrays of       
+            drive1      1-7 integers as follows:
+            drive2
+            drive3      <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly>
+
+                        Where,
+
+                <prt>   is the base of the parallel port address for
+                        the corresponding drive.  (required)
+
+                <pro>   is the protocol number for the adapter that
+                        supports this drive.  These numbers are
+                        logged by 'paride' when the protocol modules
+                        are initialised.  (0 if not given)
+
+                <uni>   for those adapters that support chained
+                        devices, this is the unit selector for the
+                        chain of devices on the given port.  It should
+                        be zero for devices that don't support chaining.
+                        (0 if not given)
+
+                <mod>   this can be -1 to choose the best mode, or one
+                        of the mode numbers supported by the adapter.
+                        (-1 if not given)
+
+                <slv>   ATAPI CDroms can be jumpered to master or slave.
+                        Set this to 0 to choose the master drive, 1 to
+                        choose the slave, -1 (the default) to choose the
+                        first drive found.
+
+		<lun>   Some ATAPI devices support multiple LUNs.
+                        One example is the ATAPI PD/CD drive from
+                        Matshita/Panasonic.  This device has a 
+                        CD drive on LUN 0 and a PD drive on LUN 1.
+                        By default, the driver will search for the
+                        first LUN with a supported device.  Set 
+                        this parameter to force it to use a specific
+                        LUN.  (default -1)
+
+                <dly>   some parallel ports require the driver to 
+                        go more slowly.  -1 sets a default value that
+                        should work with the chosen protocol.  Otherwise,
+                        set this to a small integer, the larger it is
+                        the slower the port i/o.  In some cases, setting
+                        this to zero will speed up the device. (default -1)
+
+	    major	You may use this parameter to overide the
+			default major number (47) that this driver
+			will use.  Be sure to change the device
+			name as well.
+
+	    name	This parameter is a character string that
+			contains the name the kernel will use for this
+			device (in /proc output, for instance).
+			(default "pf").
+
+            cluster     The driver will attempt to aggregate requests
+                        for adjacent blocks into larger multi-block
+                        clusters.  The maximum cluster size (in 512
+                        byte sectors) is set with this parameter.
+                        (default 64)
+
+            verbose     This parameter controls the amount of logging
+                        that the driver will do.  Set it to 0 for
+                        normal operation, 1 to see autoprobe progress
+                        messages, or 2 to see additional debugging
+                        output.  (default 0)
+ 
+	    nice        This parameter controls the driver's use of
+			idle CPU time, at the expense of some speed.
+
+        If this driver is built into the kernel, you can use the
+        following command line parameters, with the same values
+        as the corresponding module parameters listed above:
+
+            pf.drive0
+            pf.drive1
+            pf.drive2
+            pf.drive3
+	    pf.cluster
+            pf.nice
+
+        In addition, you can use the parameter pf.disable to disable
+        the driver entirely.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.03  Changes for SMP.  Eliminate sti().
+				Fix for drives that don't clear STAT_ERR
+			        until after next CDB delivered.
+				Small change in pf_completion to round
+				up transfer size.
+	1.02    GRG 1998.06.16  Eliminated an Ugh
+	1.03    GRG 1998.08.16  Use HZ in loop timings, extra debugging
+	1.04    GRG 1998.09.24  Added jumbo support
+
+*/
+
+#define PF_VERSION      "1.04"
+#define PF_MAJOR	47
+#define PF_NAME		"pf"
+#define PF_UNITS	4
+
+#include <linux/types.h>
+
+/* Here are things one can override from the insmod command.
+   Most are autoprobed by paride unless set here.  Verbose is off
+   by default.
+
+*/
+
+static bool verbose = 0;
+static int major = PF_MAJOR;
+static char *name = PF_NAME;
+static int cluster = 64;
+static int nice = 0;
+static int disable = 0;
+
+static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 };
+static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 };
+static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 };
+static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 };
+
+static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3};
+static int pf_drive_count;
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY};
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/cdrom.h>
+#include <linux/spinlock.h>
+#include <linux/blkdev.h>
+#include <linux/blkpg.h>
+#include <linux/mutex.h>
+#include <asm/uaccess.h>
+
+static DEFINE_MUTEX(pf_mutex);
+static DEFINE_SPINLOCK(pf_spin_lock);
+
+module_param(verbose, bool, 0644);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param(cluster, int, 0);
+module_param(nice, int, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+#include "pseudo.h"
+
+/* constants for faking geometry numbers */
+
+#define PF_FD_MAX	8192	/* use FD geometry under this size */
+#define PF_FD_HDS	2
+#define PF_FD_SPT	18
+#define PF_HD_HDS	64
+#define PF_HD_SPT	32
+
+#define PF_MAX_RETRIES  5
+#define PF_TMO          800	/* interrupt timeout in jiffies */
+#define PF_SPIN_DEL     50	/* spin delay in micro-seconds  */
+
+#define PF_SPIN         (1000000*PF_TMO)/(HZ*PF_SPIN_DEL)
+
+#define STAT_ERR        0x00001
+#define STAT_INDEX      0x00002
+#define STAT_ECC        0x00004
+#define STAT_DRQ        0x00008
+#define STAT_SEEK       0x00010
+#define STAT_WRERR      0x00020
+#define STAT_READY      0x00040
+#define STAT_BUSY       0x00080
+
+#define ATAPI_REQ_SENSE		0x03
+#define ATAPI_LOCK		0x1e
+#define ATAPI_DOOR		0x1b
+#define ATAPI_MODE_SENSE	0x5a
+#define ATAPI_CAPACITY		0x25
+#define ATAPI_IDENTIFY		0x12
+#define ATAPI_READ_10		0x28
+#define ATAPI_WRITE_10		0x2a
+
+static int pf_open(struct block_device *bdev, fmode_t mode);
+static void do_pf_request(struct request_queue * q);
+static int pf_ioctl(struct block_device *bdev, fmode_t mode,
+		    unsigned int cmd, unsigned long arg);
+static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo);
+
+static int pf_release(struct gendisk *disk, fmode_t mode);
+
+static int pf_detect(void);
+static void do_pf_read(void);
+static void do_pf_read_start(void);
+static void do_pf_write(void);
+static void do_pf_write_start(void);
+static void do_pf_read_drq(void);
+static void do_pf_write_done(void);
+
+#define PF_NM           0
+#define PF_RO           1
+#define PF_RW           2
+
+#define PF_NAMELEN      8
+
+struct pf_unit {
+	struct pi_adapter pia;	/* interface to paride layer */
+	struct pi_adapter *pi;
+	int removable;		/* removable media device  ?  */
+	int media_status;	/* media present ?  WP ? */
+	int drive;		/* drive */
+	int lun;
+	int access;		/* count of active opens ... */
+	int present;		/* device present ? */
+	char name[PF_NAMELEN];	/* pf0, pf1, ... */
+	struct gendisk *disk;
+};
+
+static struct pf_unit units[PF_UNITS];
+
+static int pf_identify(struct pf_unit *pf);
+static void pf_lock(struct pf_unit *pf, int func);
+static void pf_eject(struct pf_unit *pf);
+static unsigned int pf_check_events(struct gendisk *disk,
+				    unsigned int clearing);
+
+static char pf_scratch[512];	/* scratch block buffer */
+
+/* the variables below are used mainly in the I/O request engine, which
+   processes only one request at a time.
+*/
+
+static int pf_retries = 0;	/* i/o error retry count */
+static int pf_busy = 0;		/* request being processed ? */
+static struct request *pf_req;	/* current request */
+static int pf_block;		/* address of next requested block */
+static int pf_count;		/* number of blocks still to do */
+static int pf_run;		/* sectors in current cluster */
+static int pf_cmd;		/* current command READ/WRITE */
+static struct pf_unit *pf_current;/* unit of current request */
+static int pf_mask;		/* stopper for pseudo-int */
+static char *pf_buf;		/* buffer for request in progress */
+
+/* kernel glue structures */
+
+static const struct block_device_operations pf_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pf_open,
+	.release	= pf_release,
+	.ioctl		= pf_ioctl,
+	.getgeo		= pf_getgeo,
+	.check_events	= pf_check_events,
+};
+
+static void __init pf_init_units(void)
+{
+	struct pf_unit *pf;
+	int unit;
+
+	pf_drive_count = 0;
+	for (unit = 0, pf = units; unit < PF_UNITS; unit++, pf++) {
+		struct gendisk *disk = alloc_disk(1);
+		if (!disk)
+			continue;
+		pf->disk = disk;
+		pf->pi = &pf->pia;
+		pf->media_status = PF_NM;
+		pf->drive = (*drives[unit])[D_SLV];
+		pf->lun = (*drives[unit])[D_LUN];
+		snprintf(pf->name, PF_NAMELEN, "%s%d", name, unit);
+		disk->major = major;
+		disk->first_minor = unit;
+		strcpy(disk->disk_name, pf->name);
+		disk->fops = &pf_fops;
+		if (!(*drives[unit])[D_PRT])
+			pf_drive_count++;
+	}
+}
+
+static int pf_open(struct block_device *bdev, fmode_t mode)
+{
+	struct pf_unit *pf = bdev->bd_disk->private_data;
+	int ret;
+
+	mutex_lock(&pf_mutex);
+	pf_identify(pf);
+
+	ret = -ENODEV;
+	if (pf->media_status == PF_NM)
+		goto out;
+
+	ret = -EROFS;
+	if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE))
+		goto out;
+
+	ret = 0;
+	pf->access++;
+	if (pf->removable)
+		pf_lock(pf, 1);
+out:
+	mutex_unlock(&pf_mutex);
+	return ret;
+}
+
+static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+	struct pf_unit *pf = bdev->bd_disk->private_data;
+	sector_t capacity = get_capacity(pf->disk);
+
+	if (capacity < PF_FD_MAX) {
+		geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT);
+		geo->heads = PF_FD_HDS;
+		geo->sectors = PF_FD_SPT;
+	} else {
+		geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT);
+		geo->heads = PF_HD_HDS;
+		geo->sectors = PF_HD_SPT;
+	}
+
+	return 0;
+}
+
+static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
+{
+	struct pf_unit *pf = bdev->bd_disk->private_data;
+
+	if (cmd != CDROMEJECT)
+		return -EINVAL;
+
+	if (pf->access != 1)
+		return -EBUSY;
+	mutex_lock(&pf_mutex);
+	pf_eject(pf);
+	mutex_unlock(&pf_mutex);
+
+	return 0;
+}
+
+static int pf_release(struct gendisk *disk, fmode_t mode)
+{
+	struct pf_unit *pf = disk->private_data;
+
+	mutex_lock(&pf_mutex);
+	if (pf->access <= 0) {
+		mutex_unlock(&pf_mutex);
+		return -EINVAL;
+	}
+
+	pf->access--;
+
+	if (!pf->access && pf->removable)
+		pf_lock(pf, 0);
+
+	mutex_unlock(&pf_mutex);
+	return 0;
+
+}
+
+static unsigned int pf_check_events(struct gendisk *disk, unsigned int clearing)
+{
+	return DISK_EVENT_MEDIA_CHANGE;
+}
+
+static inline int status_reg(struct pf_unit *pf)
+{
+	return pi_read_regr(pf->pi, 1, 6);
+}
+
+static inline int read_reg(struct pf_unit *pf, int reg)
+{
+	return pi_read_regr(pf->pi, 0, reg);
+}
+
+static inline void write_reg(struct pf_unit *pf, int reg, int val)
+{
+	pi_write_regr(pf->pi, 0, reg, val);
+}
+
+static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg)
+{
+	int j, r, e, s, p;
+
+	j = 0;
+	while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop))))
+	       && (j++ < PF_SPIN))
+		udelay(PF_SPIN_DEL);
+
+	if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) {
+		s = read_reg(pf, 7);
+		e = read_reg(pf, 1);
+		p = read_reg(pf, 2);
+		if (j > PF_SPIN)
+			e |= 0x100;
+		if (fun)
+			printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
+			       " loop=%d phase=%d\n",
+			       pf->name, fun, msg, r, s, e, j, p);
+		return (e << 8) + s;
+	}
+	return 0;
+}
+
+static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun)
+{
+	pi_connect(pf->pi);
+
+	write_reg(pf, 6, 0xa0+0x10*pf->drive);
+
+	if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
+		pi_disconnect(pf->pi);
+		return -1;
+	}
+
+	write_reg(pf, 4, dlen % 256);
+	write_reg(pf, 5, dlen / 256);
+	write_reg(pf, 7, 0xa0);	/* ATAPI packet command */
+
+	if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
+		pi_disconnect(pf->pi);
+		return -1;
+	}
+
+	if (read_reg(pf, 2) != 1) {
+		printk("%s: %s: command phase error\n", pf->name, fun);
+		pi_disconnect(pf->pi);
+		return -1;
+	}
+
+	pi_write_block(pf->pi, cmd, 12);
+
+	return 0;
+}
+
+static int pf_completion(struct pf_unit *pf, char *buf, char *fun)
+{
+	int r, s, n;
+
+	r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+		    fun, "completion");
+
+	if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) {
+		n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) +
+		      3) & 0xfffc);
+		pi_read_block(pf->pi, buf, n);
+	}
+
+	s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
+
+	pi_disconnect(pf->pi);
+
+	return (r ? r : s);
+}
+
+static void pf_req_sense(struct pf_unit *pf, int quiet)
+{
+	char rs_cmd[12] =
+	    { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
+	char buf[16];
+	int r;
+
+	r = pf_command(pf, rs_cmd, 16, "Request sense");
+	mdelay(1);
+	if (!r)
+		pf_completion(pf, buf, "Request sense");
+
+	if ((!r) && (!quiet))
+		printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
+		       pf->name, buf[2] & 0xf, buf[12], buf[13]);
+}
+
+static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun)
+{
+	int r;
+
+	r = pf_command(pf, cmd, dlen, fun);
+	mdelay(1);
+	if (!r)
+		r = pf_completion(pf, buf, fun);
+	if (r)
+		pf_req_sense(pf, !fun);
+
+	return r;
+}
+
+static void pf_lock(struct pf_unit *pf, int func)
+{
+	char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 };
+
+	pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock");
+}
+
+static void pf_eject(struct pf_unit *pf)
+{
+	char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
+
+	pf_lock(pf, 0);
+	pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject");
+}
+
+#define PF_RESET_TMO   30	/* in tenths of a second */
+
+static void pf_sleep(int cs)
+{
+	schedule_timeout_interruptible(cs);
+}
+
+/* the ATAPI standard actually specifies the contents of all 7 registers
+   after a reset, but the specification is ambiguous concerning the last
+   two bytes, and different drives interpret the standard differently.
+ */
+
+static int pf_reset(struct pf_unit *pf)
+{
+	int i, k, flg;
+	int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+
+	pi_connect(pf->pi);
+	write_reg(pf, 6, 0xa0+0x10*pf->drive);
+	write_reg(pf, 7, 8);
+
+	pf_sleep(20 * HZ / 1000);
+
+	k = 0;
+	while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY))
+		pf_sleep(HZ / 10);
+
+	flg = 1;
+	for (i = 0; i < 5; i++)
+		flg &= (read_reg(pf, i + 1) == expect[i]);
+
+	if (verbose) {
+		printk("%s: Reset (%d) signature = ", pf->name, k);
+		for (i = 0; i < 5; i++)
+			printk("%3x", read_reg(pf, i + 1));
+		if (!flg)
+			printk(" (incorrect)");
+		printk("\n");
+	}
+
+	pi_disconnect(pf->pi);
+	return flg - 1;
+}
+
+static void pf_mode_sense(struct pf_unit *pf)
+{
+	char ms_cmd[12] =
+	    { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 };
+	char buf[8];
+
+	pf_atapi(pf, ms_cmd, 8, buf, "mode sense");
+	pf->media_status = PF_RW;
+	if (buf[3] & 0x80)
+		pf->media_status = PF_RO;
+}
+
+static void xs(char *buf, char *targ, int offs, int len)
+{
+	int j, k, l;
+
+	j = 0;
+	l = 0;
+	for (k = 0; k < len; k++)
+		if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
+			l = targ[j++] = buf[k + offs];
+	if (l == 0x20)
+		j--;
+	targ[j] = 0;
+}
+
+static int xl(char *buf, int offs)
+{
+	int v, k;
+
+	v = 0;
+	for (k = 0; k < 4; k++)
+		v = v * 256 + (buf[k + offs] & 0xff);
+	return v;
+}
+
+static void pf_get_capacity(struct pf_unit *pf)
+{
+	char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+	char buf[8];
+	int bs;
+
+	if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) {
+		pf->media_status = PF_NM;
+		return;
+	}
+	set_capacity(pf->disk, xl(buf, 0) + 1);
+	bs = xl(buf, 4);
+	if (bs != 512) {
+		set_capacity(pf->disk, 0);
+		if (verbose)
+			printk("%s: Drive %d, LUN %d,"
+			       " unsupported block size %d\n",
+			       pf->name, pf->drive, pf->lun, bs);
+	}
+}
+
+static int pf_identify(struct pf_unit *pf)
+{
+	int dt, s;
+	char *ms[2] = { "master", "slave" };
+	char mf[10], id[18];
+	char id_cmd[12] =
+	    { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+	char buf[36];
+
+	s = pf_atapi(pf, id_cmd, 36, buf, "identify");
+	if (s)
+		return -1;
+
+	dt = buf[0] & 0x1f;
+	if ((dt != 0) && (dt != 7)) {
+		if (verbose)
+			printk("%s: Drive %d, LUN %d, unsupported type %d\n",
+			       pf->name, pf->drive, pf->lun, dt);
+		return -1;
+	}
+
+	xs(buf, mf, 8, 8);
+	xs(buf, id, 16, 16);
+
+	pf->removable = (buf[1] & 0x80);
+
+	pf_mode_sense(pf);
+	pf_mode_sense(pf);
+	pf_mode_sense(pf);
+
+	pf_get_capacity(pf);
+
+	printk("%s: %s %s, %s LUN %d, type %d",
+	       pf->name, mf, id, ms[pf->drive], pf->lun, dt);
+	if (pf->removable)
+		printk(", removable");
+	if (pf->media_status == PF_NM)
+		printk(", no media\n");
+	else {
+		if (pf->media_status == PF_RO)
+			printk(", RO");
+		printk(", %llu blocks\n",
+			(unsigned long long)get_capacity(pf->disk));
+	}
+	return 0;
+}
+
+/*	returns  0, with id set if drive is detected
+	        -1, if drive detection failed
+*/
+static int pf_probe(struct pf_unit *pf)
+{
+	if (pf->drive == -1) {
+		for (pf->drive = 0; pf->drive <= 1; pf->drive++)
+			if (!pf_reset(pf)) {
+				if (pf->lun != -1)
+					return pf_identify(pf);
+				else
+					for (pf->lun = 0; pf->lun < 8; pf->lun++)
+						if (!pf_identify(pf))
+							return 0;
+			}
+	} else {
+		if (pf_reset(pf))
+			return -1;
+		if (pf->lun != -1)
+			return pf_identify(pf);
+		for (pf->lun = 0; pf->lun < 8; pf->lun++)
+			if (!pf_identify(pf))
+				return 0;
+	}
+	return -1;
+}
+
+static int pf_detect(void)
+{
+	struct pf_unit *pf = units;
+	int k, unit;
+
+	printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
+	       name, name, PF_VERSION, major, cluster, nice);
+
+	k = 0;
+	if (pf_drive_count == 0) {
+		if (pi_init(pf->pi, 1, -1, -1, -1, -1, -1, pf_scratch, PI_PF,
+			    verbose, pf->name)) {
+			if (!pf_probe(pf) && pf->disk) {
+				pf->present = 1;
+				k++;
+			} else
+				pi_release(pf->pi);
+		}
+
+	} else
+		for (unit = 0; unit < PF_UNITS; unit++, pf++) {
+			int *conf = *drives[unit];
+			if (!conf[D_PRT])
+				continue;
+			if (pi_init(pf->pi, 0, conf[D_PRT], conf[D_MOD],
+				    conf[D_UNI], conf[D_PRO], conf[D_DLY],
+				    pf_scratch, PI_PF, verbose, pf->name)) {
+				if (pf->disk && !pf_probe(pf)) {
+					pf->present = 1;
+					k++;
+				} else
+					pi_release(pf->pi);
+			}
+		}
+	if (k)
+		return 0;
+
+	printk("%s: No ATAPI disk detected\n", name);
+	for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
+		put_disk(pf->disk);
+	return -1;
+}
+
+/* The i/o request engine */
+
+static int pf_start(struct pf_unit *pf, int cmd, int b, int c)
+{
+	int i;
+	char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+	for (i = 0; i < 4; i++) {
+		io_cmd[5 - i] = b & 0xff;
+		b = b >> 8;
+	}
+
+	io_cmd[8] = c & 0xff;
+	io_cmd[7] = (c >> 8) & 0xff;
+
+	i = pf_command(pf, io_cmd, c * 512, "start i/o");
+
+	mdelay(1);
+
+	return i;
+}
+
+static int pf_ready(void)
+{
+	return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask));
+}
+
+static struct request_queue *pf_queue;
+
+static void pf_end_request(int err)
+{
+	if (pf_req && !__blk_end_request_cur(pf_req, err))
+		pf_req = NULL;
+}
+
+static void do_pf_request(struct request_queue * q)
+{
+	if (pf_busy)
+		return;
+repeat:
+	if (!pf_req) {
+		pf_req = blk_fetch_request(q);
+		if (!pf_req)
+			return;
+	}
+
+	pf_current = pf_req->rq_disk->private_data;
+	pf_block = blk_rq_pos(pf_req);
+	pf_run = blk_rq_sectors(pf_req);
+	pf_count = blk_rq_cur_sectors(pf_req);
+
+	if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
+		pf_end_request(-EIO);
+		goto repeat;
+	}
+
+	pf_cmd = rq_data_dir(pf_req);
+	pf_buf = pf_req->buffer;
+	pf_retries = 0;
+
+	pf_busy = 1;
+	if (pf_cmd == READ)
+		pi_do_claimed(pf_current->pi, do_pf_read);
+	else if (pf_cmd == WRITE)
+		pi_do_claimed(pf_current->pi, do_pf_write);
+	else {
+		pf_busy = 0;
+		pf_end_request(-EIO);
+		goto repeat;
+	}
+}
+
+static int pf_next_buf(void)
+{
+	unsigned long saved_flags;
+
+	pf_count--;
+	pf_run--;
+	pf_buf += 512;
+	pf_block++;
+	if (!pf_run)
+		return 1;
+	if (!pf_count) {
+		spin_lock_irqsave(&pf_spin_lock, saved_flags);
+		pf_end_request(0);
+		spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
+		if (!pf_req)
+			return 1;
+		pf_count = blk_rq_cur_sectors(pf_req);
+		pf_buf = pf_req->buffer;
+	}
+	return 0;
+}
+
+static inline void next_request(int err)
+{
+	unsigned long saved_flags;
+
+	spin_lock_irqsave(&pf_spin_lock, saved_flags);
+	pf_end_request(err);
+	pf_busy = 0;
+	do_pf_request(pf_queue);
+	spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
+}
+
+/* detach from the calling context - in case the spinlock is held */
+static void do_pf_read(void)
+{
+	ps_set_intr(do_pf_read_start, NULL, 0, nice);
+}
+
+static void do_pf_read_start(void)
+{
+	pf_busy = 1;
+
+	if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) {
+		pi_disconnect(pf_current->pi);
+		if (pf_retries < PF_MAX_RETRIES) {
+			pf_retries++;
+			pi_do_claimed(pf_current->pi, do_pf_read_start);
+			return;
+		}
+		next_request(-EIO);
+		return;
+	}
+	pf_mask = STAT_DRQ;
+	ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice);
+}
+
+static void do_pf_read_drq(void)
+{
+	while (1) {
+		if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
+			    "read block", "completion") & STAT_ERR) {
+			pi_disconnect(pf_current->pi);
+			if (pf_retries < PF_MAX_RETRIES) {
+				pf_req_sense(pf_current, 0);
+				pf_retries++;
+				pi_do_claimed(pf_current->pi, do_pf_read_start);
+				return;
+			}
+			next_request(-EIO);
+			return;
+		}
+		pi_read_block(pf_current->pi, pf_buf, 512);
+		if (pf_next_buf())
+			break;
+	}
+	pi_disconnect(pf_current->pi);
+	next_request(0);
+}
+
+static void do_pf_write(void)
+{
+	ps_set_intr(do_pf_write_start, NULL, 0, nice);
+}
+
+static void do_pf_write_start(void)
+{
+	pf_busy = 1;
+
+	if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) {
+		pi_disconnect(pf_current->pi);
+		if (pf_retries < PF_MAX_RETRIES) {
+			pf_retries++;
+			pi_do_claimed(pf_current->pi, do_pf_write_start);
+			return;
+		}
+		next_request(-EIO);
+		return;
+	}
+
+	while (1) {
+		if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
+			    "write block", "data wait") & STAT_ERR) {
+			pi_disconnect(pf_current->pi);
+			if (pf_retries < PF_MAX_RETRIES) {
+				pf_retries++;
+				pi_do_claimed(pf_current->pi, do_pf_write_start);
+				return;
+			}
+			next_request(-EIO);
+			return;
+		}
+		pi_write_block(pf_current->pi, pf_buf, 512);
+		if (pf_next_buf())
+			break;
+	}
+	pf_mask = 0;
+	ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice);
+}
+
+static void do_pf_write_done(void)
+{
+	if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) {
+		pi_disconnect(pf_current->pi);
+		if (pf_retries < PF_MAX_RETRIES) {
+			pf_retries++;
+			pi_do_claimed(pf_current->pi, do_pf_write_start);
+			return;
+		}
+		next_request(-EIO);
+		return;
+	}
+	pi_disconnect(pf_current->pi);
+	next_request(0);
+}
+
+static int __init pf_init(void)
+{				/* preliminary initialisation */
+	struct pf_unit *pf;
+	int unit;
+
+	if (disable)
+		return -EINVAL;
+
+	pf_init_units();
+
+	if (pf_detect())
+		return -ENODEV;
+	pf_busy = 0;
+
+	if (register_blkdev(major, name)) {
+		for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
+			put_disk(pf->disk);
+		return -EBUSY;
+	}
+	pf_queue = blk_init_queue(do_pf_request, &pf_spin_lock);
+	if (!pf_queue) {
+		unregister_blkdev(major, name);
+		for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
+			put_disk(pf->disk);
+		return -ENOMEM;
+	}
+
+	blk_queue_max_segments(pf_queue, cluster);
+
+	for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
+		struct gendisk *disk = pf->disk;
+
+		if (!pf->present)
+			continue;
+		disk->private_data = pf;
+		disk->queue = pf_queue;
+		add_disk(disk);
+	}
+	return 0;
+}
+
+static void __exit pf_exit(void)
+{
+	struct pf_unit *pf;
+	int unit;
+	unregister_blkdev(major, name);
+	for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
+		if (!pf->present)
+			continue;
+		del_gendisk(pf->disk);
+		put_disk(pf->disk);
+		pi_release(pf->pi);
+	}
+	blk_cleanup_queue(pf_queue);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pf_init)
+module_exit(pf_exit)
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
new file mode 100644
index 00000000..4a27b1de
--- /dev/null
+++ b/drivers/block/paride/pg.c
@@ -0,0 +1,726 @@
+/* 
+	pg.c    (c) 1998  Grant R. Guenther <grant@torque.net>
+			  Under the terms of the GNU General Public License.
+
+	The pg driver provides a simple character device interface for
+	sending ATAPI commands to a device.  With the exception of the
+	ATAPI reset operation, all operations are performed by a pair
+	of read and write operations to the appropriate /dev/pgN device.
+	A write operation delivers a command and any outbound data in
+	a single buffer.  Normally, the write will succeed unless the
+	device is offline or malfunctioning, or there is already another
+	command pending.  If the write succeeds, it should be followed
+	immediately by a read operation, to obtain any returned data and
+	status information.  A read will fail if there is no operation
+	in progress.
+
+	As a special case, the device can be reset with a write operation,
+	and in this case, no following read is expected, or permitted.
+
+	There are no ioctl() operations.  Any single operation
+	may transfer at most PG_MAX_DATA bytes.  Note that the driver must
+	copy the data through an internal buffer.  In keeping with all
+	current ATAPI devices, command packets are assumed to be exactly
+	12 bytes in length.
+
+	To permit future changes to this interface, the headers in the
+	read and write buffers contain a single character "magic" flag.
+	Currently this flag must be the character "P".
+
+	By default, the driver will autoprobe for a single parallel
+	port ATAPI device, but if their individual parameters are
+	specified, the driver can handle up to 4 devices.
+
+	To use this device, you must have the following device 
+	special files defined:
+
+		/dev/pg0 c 97 0
+		/dev/pg1 c 97 1
+		/dev/pg2 c 97 2
+		/dev/pg3 c 97 3
+
+	(You'll need to change the 97 to something else if you use
+	the 'major' parameter to install the driver on a different
+	major number.)
+
+	The behaviour of the pg driver can be altered by setting
+	some parameters from the insmod command line.  The following
+	parameters are adjustable:
+
+	    drive0      These four arguments can be arrays of       
+	    drive1      1-6 integers as follows:
+	    drive2
+	    drive3      <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
+
+			Where,
+
+		<prt>   is the base of the parallel port address for
+			the corresponding drive.  (required)
+
+		<pro>   is the protocol number for the adapter that
+			supports this drive.  These numbers are
+			logged by 'paride' when the protocol modules
+			are initialised.  (0 if not given)
+
+		<uni>   for those adapters that support chained
+			devices, this is the unit selector for the
+			chain of devices on the given port.  It should
+			be zero for devices that don't support chaining.
+			(0 if not given)
+
+		<mod>   this can be -1 to choose the best mode, or one
+			of the mode numbers supported by the adapter.
+			(-1 if not given)
+
+		<slv>   ATAPI devices can be jumpered to master or slave.
+			Set this to 0 to choose the master drive, 1 to
+			choose the slave, -1 (the default) to choose the
+			first drive found.
+
+		<dly>   some parallel ports require the driver to 
+			go more slowly.  -1 sets a default value that
+			should work with the chosen protocol.  Otherwise,
+			set this to a small integer, the larger it is
+			the slower the port i/o.  In some cases, setting
+			this to zero will speed up the device. (default -1)
+
+	    major	You may use this parameter to overide the
+			default major number (97) that this driver
+			will use.  Be sure to change the device
+			name as well.
+
+	    name	This parameter is a character string that
+			contains the name the kernel will use for this
+			device (in /proc output, for instance).
+			(default "pg").
+
+	    verbose     This parameter controls the amount of logging
+			that is done by the driver.  Set it to 0 for 
+			quiet operation, to 1 to enable progress
+			messages while the driver probes for devices,
+			or to 2 for full debug logging.  (default 0)
+
+	If this driver is built into the kernel, you can use 
+	the following command line parameters, with the same values
+	as the corresponding module parameters listed above:
+
+	    pg.drive0
+	    pg.drive1
+	    pg.drive2
+	    pg.drive3
+
+	In addition, you can use the parameter pg.disable to disable
+	the driver entirely.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.06.16	Bug fixes
+	1.02    GRG 1998.09.24  Added jumbo support
+
+*/
+
+#define PG_VERSION      "1.02"
+#define PG_MAJOR	97
+#define PG_NAME		"pg"
+#define PG_UNITS	4
+
+#ifndef PI_PG
+#define PI_PG	4
+#endif
+
+#include <linux/types.h>
+/* Here are things one can override from the insmod command.
+   Most are autoprobed by paride unless set here.  Verbose is 0
+   by default.
+
+*/
+
+static bool verbose = 0;
+static int major = PG_MAJOR;
+static char *name = PG_NAME;
+static int disable = 0;
+
+static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
+
+static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
+static int pg_drive_count;
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mtio.h>
+#include <linux/pg.h>
+#include <linux/device.h>
+#include <linux/sched.h>	/* current, TASK_* */
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+
+#include <asm/uaccess.h>
+
+module_param(verbose, bool, 0644);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+
+#define PG_SPIN_DEL     50	/* spin delay in micro-seconds  */
+#define PG_SPIN         200
+#define PG_TMO		HZ
+#define PG_RESET_TMO	10*HZ
+
+#define STAT_ERR        0x01
+#define STAT_INDEX      0x02
+#define STAT_ECC        0x04
+#define STAT_DRQ        0x08
+#define STAT_SEEK       0x10
+#define STAT_WRERR      0x20
+#define STAT_READY      0x40
+#define STAT_BUSY       0x80
+
+#define ATAPI_IDENTIFY		0x12
+
+static DEFINE_MUTEX(pg_mutex);
+static int pg_open(struct inode *inode, struct file *file);
+static int pg_release(struct inode *inode, struct file *file);
+static ssize_t pg_read(struct file *filp, char __user *buf,
+		       size_t count, loff_t * ppos);
+static ssize_t pg_write(struct file *filp, const char __user *buf,
+			size_t count, loff_t * ppos);
+static int pg_detect(void);
+
+#define PG_NAMELEN      8
+
+struct pg {
+	struct pi_adapter pia;	/* interface to paride layer */
+	struct pi_adapter *pi;
+	int busy;		/* write done, read expected */
+	int start;		/* jiffies at command start */
+	int dlen;		/* transfer size requested */
+	unsigned long timeout;	/* timeout requested */
+	int status;		/* last sense key */
+	int drive;		/* drive */
+	unsigned long access;	/* count of active opens ... */
+	int present;		/* device present ? */
+	char *bufptr;
+	char name[PG_NAMELEN];	/* pg0, pg1, ... */
+};
+
+static struct pg devices[PG_UNITS];
+
+static int pg_identify(struct pg *dev, int log);
+
+static char pg_scratch[512];	/* scratch block buffer */
+
+static struct class *pg_class;
+
+/* kernel glue structures */
+
+static const struct file_operations pg_fops = {
+	.owner = THIS_MODULE,
+	.read = pg_read,
+	.write = pg_write,
+	.open = pg_open,
+	.release = pg_release,
+	.llseek = noop_llseek,
+};
+
+static void pg_init_units(void)
+{
+	int unit;
+
+	pg_drive_count = 0;
+	for (unit = 0; unit < PG_UNITS; unit++) {
+		int *parm = *drives[unit];
+		struct pg *dev = &devices[unit];
+		dev->pi = &dev->pia;
+		clear_bit(0, &dev->access);
+		dev->busy = 0;
+		dev->present = 0;
+		dev->bufptr = NULL;
+		dev->drive = parm[D_SLV];
+		snprintf(dev->name, PG_NAMELEN, "%s%c", name, 'a'+unit);
+		if (parm[D_PRT])
+			pg_drive_count++;
+	}
+}
+
+static inline int status_reg(struct pg *dev)
+{
+	return pi_read_regr(dev->pi, 1, 6);
+}
+
+static inline int read_reg(struct pg *dev, int reg)
+{
+	return pi_read_regr(dev->pi, 0, reg);
+}
+
+static inline void write_reg(struct pg *dev, int reg, int val)
+{
+	pi_write_regr(dev->pi, 0, reg, val);
+}
+
+static inline u8 DRIVE(struct pg *dev)
+{
+	return 0xa0+0x10*dev->drive;
+}
+
+static void pg_sleep(int cs)
+{
+	schedule_timeout_interruptible(cs);
+}
+
+static int pg_wait(struct pg *dev, int go, int stop, unsigned long tmo, char *msg)
+{
+	int j, r, e, s, p, to;
+
+	dev->status = 0;
+
+	j = 0;
+	while ((((r = status_reg(dev)) & go) || (stop && (!(r & stop))))
+	       && time_before(jiffies, tmo)) {
+		if (j++ < PG_SPIN)
+			udelay(PG_SPIN_DEL);
+		else
+			pg_sleep(1);
+	}
+
+	to = time_after_eq(jiffies, tmo);
+
+	if ((r & (STAT_ERR & stop)) || to) {
+		s = read_reg(dev, 7);
+		e = read_reg(dev, 1);
+		p = read_reg(dev, 2);
+		if (verbose > 1)
+			printk("%s: %s: stat=0x%x err=0x%x phase=%d%s\n",
+			       dev->name, msg, s, e, p, to ? " timeout" : "");
+		if (to)
+			e |= 0x100;
+		dev->status = (e >> 4) & 0xff;
+		return -1;
+	}
+	return 0;
+}
+
+static int pg_command(struct pg *dev, char *cmd, int dlen, unsigned long tmo)
+{
+	int k;
+
+	pi_connect(dev->pi);
+
+	write_reg(dev, 6, DRIVE(dev));
+
+	if (pg_wait(dev, STAT_BUSY | STAT_DRQ, 0, tmo, "before command"))
+		goto fail;
+
+	write_reg(dev, 4, dlen % 256);
+	write_reg(dev, 5, dlen / 256);
+	write_reg(dev, 7, 0xa0);	/* ATAPI packet command */
+
+	if (pg_wait(dev, STAT_BUSY, STAT_DRQ, tmo, "command DRQ"))
+		goto fail;
+
+	if (read_reg(dev, 2) != 1) {
+		printk("%s: command phase error\n", dev->name);
+		goto fail;
+	}
+
+	pi_write_block(dev->pi, cmd, 12);
+
+	if (verbose > 1) {
+		printk("%s: Command sent, dlen=%d packet= ", dev->name, dlen);
+		for (k = 0; k < 12; k++)
+			printk("%02x ", cmd[k] & 0xff);
+		printk("\n");
+	}
+	return 0;
+fail:
+	pi_disconnect(dev->pi);
+	return -1;
+}
+
+static int pg_completion(struct pg *dev, char *buf, unsigned long tmo)
+{
+	int r, d, n, p;
+
+	r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+		    tmo, "completion");
+
+	dev->dlen = 0;
+
+	while (read_reg(dev, 7) & STAT_DRQ) {
+		d = (read_reg(dev, 4) + 256 * read_reg(dev, 5));
+		n = ((d + 3) & 0xfffc);
+		p = read_reg(dev, 2) & 3;
+		if (p == 0)
+			pi_write_block(dev->pi, buf, n);
+		if (p == 2)
+			pi_read_block(dev->pi, buf, n);
+		if (verbose > 1)
+			printk("%s: %s %d bytes\n", dev->name,
+			       p ? "Read" : "Write", n);
+		dev->dlen += (1 - p) * d;
+		buf += d;
+		r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+			    tmo, "completion");
+	}
+
+	pi_disconnect(dev->pi);
+
+	return r;
+}
+
+static int pg_reset(struct pg *dev)
+{
+	int i, k, err;
+	int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+	int got[5];
+
+	pi_connect(dev->pi);
+	write_reg(dev, 6, DRIVE(dev));
+	write_reg(dev, 7, 8);
+
+	pg_sleep(20 * HZ / 1000);
+
+	k = 0;
+	while ((k++ < PG_RESET_TMO) && (status_reg(dev) & STAT_BUSY))
+		pg_sleep(1);
+
+	for (i = 0; i < 5; i++)
+		got[i] = read_reg(dev, i + 1);
+
+	err = memcmp(expect, got, sizeof(got)) ? -1 : 0;
+
+	if (verbose) {
+		printk("%s: Reset (%d) signature = ", dev->name, k);
+		for (i = 0; i < 5; i++)
+			printk("%3x", got[i]);
+		if (err)
+			printk(" (incorrect)");
+		printk("\n");
+	}
+
+	pi_disconnect(dev->pi);
+	return err;
+}
+
+static void xs(char *buf, char *targ, int len)
+{
+	char l = '\0';
+	int k;
+
+	for (k = 0; k < len; k++) {
+		char c = *buf++;
+		if (c != ' ' && c != l)
+			l = *targ++ = c;
+	}
+	if (l == ' ')
+		targ--;
+	*targ = '\0';
+}
+
+static int pg_identify(struct pg *dev, int log)
+{
+	int s;
+	char *ms[2] = { "master", "slave" };
+	char mf[10], id[18];
+	char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+	char buf[36];
+
+	s = pg_command(dev, id_cmd, 36, jiffies + PG_TMO);
+	if (s)
+		return -1;
+	s = pg_completion(dev, buf, jiffies + PG_TMO);
+	if (s)
+		return -1;
+
+	if (log) {
+		xs(buf + 8, mf, 8);
+		xs(buf + 16, id, 16);
+		printk("%s: %s %s, %s\n", dev->name, mf, id, ms[dev->drive]);
+	}
+
+	return 0;
+}
+
+/*
+ * returns  0, with id set if drive is detected
+ *	   -1, if drive detection failed
+ */
+static int pg_probe(struct pg *dev)
+{
+	if (dev->drive == -1) {
+		for (dev->drive = 0; dev->drive <= 1; dev->drive++)
+			if (!pg_reset(dev))
+				return pg_identify(dev, 1);
+	} else {
+		if (!pg_reset(dev))
+			return pg_identify(dev, 1);
+	}
+	return -1;
+}
+
+static int pg_detect(void)
+{
+	struct pg *dev = &devices[0];
+	int k, unit;
+
+	printk("%s: %s version %s, major %d\n", name, name, PG_VERSION, major);
+
+	k = 0;
+	if (pg_drive_count == 0) {
+		if (pi_init(dev->pi, 1, -1, -1, -1, -1, -1, pg_scratch,
+			    PI_PG, verbose, dev->name)) {
+			if (!pg_probe(dev)) {
+				dev->present = 1;
+				k++;
+			} else
+				pi_release(dev->pi);
+		}
+
+	} else
+		for (unit = 0; unit < PG_UNITS; unit++, dev++) {
+			int *parm = *drives[unit];
+			if (!parm[D_PRT])
+				continue;
+			if (pi_init(dev->pi, 0, parm[D_PRT], parm[D_MOD],
+				    parm[D_UNI], parm[D_PRO], parm[D_DLY],
+				    pg_scratch, PI_PG, verbose, dev->name)) {
+				if (!pg_probe(dev)) {
+					dev->present = 1;
+					k++;
+				} else
+					pi_release(dev->pi);
+			}
+		}
+
+	if (k)
+		return 0;
+
+	printk("%s: No ATAPI device detected\n", name);
+	return -1;
+}
+
+static int pg_open(struct inode *inode, struct file *file)
+{
+	int unit = iminor(inode) & 0x7f;
+	struct pg *dev = &devices[unit];
+	int ret = 0;
+
+	mutex_lock(&pg_mutex);
+	if ((unit >= PG_UNITS) || (!dev->present)) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (test_and_set_bit(0, &dev->access)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (dev->busy) {
+		pg_reset(dev);
+		dev->busy = 0;
+	}
+
+	pg_identify(dev, (verbose > 1));
+
+	dev->bufptr = kmalloc(PG_MAX_DATA, GFP_KERNEL);
+	if (dev->bufptr == NULL) {
+		clear_bit(0, &dev->access);
+		printk("%s: buffer allocation failed\n", dev->name);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	file->private_data = dev;
+
+out:
+	mutex_unlock(&pg_mutex);
+	return ret;
+}
+
+static int pg_release(struct inode *inode, struct file *file)
+{
+	struct pg *dev = file->private_data;
+
+	kfree(dev->bufptr);
+	dev->bufptr = NULL;
+	clear_bit(0, &dev->access);
+
+	return 0;
+}
+
+static ssize_t pg_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos)
+{
+	struct pg *dev = filp->private_data;
+	struct pg_write_hdr hdr;
+	int hs = sizeof (hdr);
+
+	if (dev->busy)
+		return -EBUSY;
+	if (count < hs)
+		return -EINVAL;
+
+	if (copy_from_user(&hdr, buf, hs))
+		return -EFAULT;
+
+	if (hdr.magic != PG_MAGIC)
+		return -EINVAL;
+	if (hdr.dlen > PG_MAX_DATA)
+		return -EINVAL;
+	if ((count - hs) > PG_MAX_DATA)
+		return -EINVAL;
+
+	if (hdr.func == PG_RESET) {
+		if (count != hs)
+			return -EINVAL;
+		if (pg_reset(dev))
+			return -EIO;
+		return count;
+	}
+
+	if (hdr.func != PG_COMMAND)
+		return -EINVAL;
+
+	dev->start = jiffies;
+	dev->timeout = hdr.timeout * HZ + HZ / 2 + jiffies;
+
+	if (pg_command(dev, hdr.packet, hdr.dlen, jiffies + PG_TMO)) {
+		if (dev->status & 0x10)
+			return -ETIME;
+		return -EIO;
+	}
+
+	dev->busy = 1;
+
+	if (copy_from_user(dev->bufptr, buf + hs, count - hs))
+		return -EFAULT;
+	return count;
+}
+
+static ssize_t pg_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
+{
+	struct pg *dev = filp->private_data;
+	struct pg_read_hdr hdr;
+	int hs = sizeof (hdr);
+	int copy;
+
+	if (!dev->busy)
+		return -EINVAL;
+	if (count < hs)
+		return -EINVAL;
+
+	dev->busy = 0;
+
+	if (pg_completion(dev, dev->bufptr, dev->timeout))
+		if (dev->status & 0x10)
+			return -ETIME;
+
+	memset(&hdr, 0, sizeof(hdr));
+	hdr.magic = PG_MAGIC;
+	hdr.dlen = dev->dlen;
+	copy = 0;
+
+	if (hdr.dlen < 0) {
+		hdr.dlen = -1 * hdr.dlen;
+		copy = hdr.dlen;
+		if (copy > (count - hs))
+			copy = count - hs;
+	}
+
+	hdr.duration = (jiffies - dev->start + HZ / 2) / HZ;
+	hdr.scsi = dev->status & 0x0f;
+
+	if (copy_to_user(buf, &hdr, hs))
+		return -EFAULT;
+	if (copy > 0)
+		if (copy_to_user(buf + hs, dev->bufptr, copy))
+			return -EFAULT;
+	return copy + hs;
+}
+
+static int __init pg_init(void)
+{
+	int unit;
+	int err;
+
+	if (disable){
+		err = -EINVAL;
+		goto out;
+	}
+
+	pg_init_units();
+
+	if (pg_detect()) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	err = register_chrdev(major, name, &pg_fops);
+	if (err < 0) {
+		printk("pg_init: unable to get major number %d\n", major);
+		for (unit = 0; unit < PG_UNITS; unit++) {
+			struct pg *dev = &devices[unit];
+			if (dev->present)
+				pi_release(dev->pi);
+		}
+		goto out;
+	}
+	major = err;	/* In case the user specified `major=0' (dynamic) */
+	pg_class = class_create(THIS_MODULE, "pg");
+	if (IS_ERR(pg_class)) {
+		err = PTR_ERR(pg_class);
+		goto out_chrdev;
+	}
+	for (unit = 0; unit < PG_UNITS; unit++) {
+		struct pg *dev = &devices[unit];
+		if (dev->present)
+			device_create(pg_class, NULL, MKDEV(major, unit), NULL,
+				      "pg%u", unit);
+	}
+	err = 0;
+	goto out;
+
+out_chrdev:
+	unregister_chrdev(major, "pg");
+out:
+	return err;
+}
+
+static void __exit pg_exit(void)
+{
+	int unit;
+
+	for (unit = 0; unit < PG_UNITS; unit++) {
+		struct pg *dev = &devices[unit];
+		if (dev->present)
+			device_destroy(pg_class, MKDEV(major, unit));
+	}
+	class_destroy(pg_class);
+	unregister_chrdev(major, name);
+
+	for (unit = 0; unit < PG_UNITS; unit++) {
+		struct pg *dev = &devices[unit];
+		if (dev->present)
+			pi_release(dev->pi);
+	}
+}
+
+MODULE_LICENSE("GPL");
+module_init(pg_init)
+module_exit(pg_exit)
diff --git a/drivers/block/paride/ppc6lnx.c b/drivers/block/paride/ppc6lnx.c
new file mode 100644
index 00000000..5e5521d3
--- /dev/null
+++ b/drivers/block/paride/ppc6lnx.c
@@ -0,0 +1,726 @@
+/*
+	ppc6lnx.c (c) 2001 Micro Solutions Inc.
+		Released under the terms of the GNU General Public license
+
+	ppc6lnx.c  is a par of the protocol driver for the Micro Solutions
+		"BACKPACK" parallel port IDE adapter
+		(Works on Series 6 drives)
+
+*/
+
+//***************************************************************************
+
+// PPC 6 Code in C sanitized for LINUX
+// Original x86 ASM by Ron, Converted to C by Clive
+
+//***************************************************************************
+
+
+#define port_stb					1
+#define port_afd					2
+#define cmd_stb						port_afd
+#define port_init					4
+#define data_stb					port_init
+#define port_sel					8
+#define port_int					16
+#define port_dir					0x20
+
+#define ECR_EPP	0x80
+#define ECR_BI	0x20
+
+//***************************************************************************
+
+//  60772 Commands
+
+#define ACCESS_REG				0x00
+#define ACCESS_PORT				0x40
+
+#define ACCESS_READ				0x00
+#define ACCESS_WRITE			0x20
+
+//  60772 Command Prefix
+
+#define CMD_PREFIX_SET		0xe0		// Special command that modifies the next command's operation
+#define CMD_PREFIX_RESET	0xc0		// Resets current cmd modifier reg bits
+ #define PREFIX_IO16			0x01		// perform 16-bit wide I/O
+ #define PREFIX_FASTWR		0x04		// enable PPC mode fast-write
+ #define PREFIX_BLK				0x08		// enable block transfer mode
+
+// 60772 Registers
+
+#define REG_STATUS				0x00		// status register
+ #define STATUS_IRQA			0x01		// Peripheral IRQA line
+ #define STATUS_EEPROM_DO	0x40		// Serial EEPROM data bit
+#define REG_VERSION				0x01		// PPC version register (read)
+#define REG_HWCFG					0x02		// Hardware Config register
+#define REG_RAMSIZE				0x03		// Size of RAM Buffer
+ #define RAMSIZE_128K			0x02
+#define REG_EEPROM				0x06		// EEPROM control register
+ #define EEPROM_SK				0x01		// eeprom SK bit
+ #define EEPROM_DI				0x02		// eeprom DI bit
+ #define EEPROM_CS				0x04		// eeprom CS bit
+ #define EEPROM_EN				0x08		// eeprom output enable
+#define REG_BLKSIZE				0x08		// Block transfer len (24 bit)
+
+//***************************************************************************
+
+typedef struct ppc_storage {
+	u16	lpt_addr;				// LPT base address
+	u8	ppc_id;
+	u8	mode;						// operating mode
+					// 0 = PPC Uni SW
+					// 1 = PPC Uni FW
+					// 2 = PPC Bi SW
+					// 3 = PPC Bi FW
+					// 4 = EPP Byte
+					// 5 = EPP Word
+					// 6 = EPP Dword
+	u8	ppc_flags;
+	u8	org_data;				// original LPT data port contents
+	u8	org_ctrl;				// original LPT control port contents
+	u8	cur_ctrl;				// current control port contents
+} Interface;
+
+//***************************************************************************
+
+// ppc_flags
+
+#define fifo_wait					0x10
+
+//***************************************************************************
+
+// DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES
+
+#define PPCMODE_UNI_SW		0
+#define PPCMODE_UNI_FW		1
+#define PPCMODE_BI_SW			2
+#define PPCMODE_BI_FW			3
+#define PPCMODE_EPP_BYTE	4
+#define PPCMODE_EPP_WORD	5
+#define PPCMODE_EPP_DWORD	6
+
+//***************************************************************************
+
+static int ppc6_select(Interface *ppc);
+static void ppc6_deselect(Interface *ppc);
+static void ppc6_send_cmd(Interface *ppc, u8 cmd);
+static void ppc6_wr_data_byte(Interface *ppc, u8 data);
+static u8 ppc6_rd_data_byte(Interface *ppc);
+static u8 ppc6_rd_port(Interface *ppc, u8 port);
+static void ppc6_wr_port(Interface *ppc, u8 port, u8 data);
+static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count);
+static void ppc6_wait_for_fifo(Interface *ppc);
+static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count);
+static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length);
+static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length);
+static void ppc6_wr_extout(Interface *ppc, u8 regdata);
+static int ppc6_open(Interface *ppc);
+static void ppc6_close(Interface *ppc);
+
+//***************************************************************************
+
+static int ppc6_select(Interface *ppc)
+{
+	u8 i, j, k;
+
+	i = inb(ppc->lpt_addr + 1);
+
+	if (i & 1)
+		outb(i, ppc->lpt_addr + 1);
+
+	ppc->org_data = inb(ppc->lpt_addr);
+
+	ppc->org_ctrl = inb(ppc->lpt_addr + 2) & 0x5F; // readback ctrl
+
+	ppc->cur_ctrl = ppc->org_ctrl;
+
+	ppc->cur_ctrl |= port_sel;
+
+	outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+	if (ppc->org_data == 'b')
+		outb('x', ppc->lpt_addr);
+
+	outb('b', ppc->lpt_addr);
+	outb('p', ppc->lpt_addr);
+	outb(ppc->ppc_id, ppc->lpt_addr);
+	outb(~ppc->ppc_id,ppc->lpt_addr);
+
+	ppc->cur_ctrl &= ~port_sel;
+
+	outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+	ppc->cur_ctrl = (ppc->cur_ctrl & port_int) | port_init;
+
+	outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+	i = ppc->mode & 0x0C;
+
+	if (i == 0)
+		i = (ppc->mode & 2) | 1;
+
+	outb(i, ppc->lpt_addr);
+
+	ppc->cur_ctrl |= port_sel;
+
+	outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+	// DELAY
+
+	ppc->cur_ctrl |= port_afd;
+
+	outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+	j = ((i & 0x08) << 4) | ((i & 0x07) << 3);
+
+	k = inb(ppc->lpt_addr + 1) & 0xB8;
+
+	if (j == k)
+	{
+		ppc->cur_ctrl &= ~port_afd;
+
+		outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+		k = (inb(ppc->lpt_addr + 1) & 0xB8) ^ 0xB8;
+
+		if (j == k)
+		{
+			if (i & 4)	// EPP
+				ppc->cur_ctrl &= ~(port_sel | port_init);
+			else				// PPC/ECP
+				ppc->cur_ctrl &= ~port_sel;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			return(1);
+		}
+	}
+
+	outb(ppc->org_ctrl, ppc->lpt_addr + 2);
+
+	outb(ppc->org_data, ppc->lpt_addr);
+
+	return(0); // FAIL
+}
+
+//***************************************************************************
+
+static void ppc6_deselect(Interface *ppc)
+{
+	if (ppc->mode & 4)	// EPP
+		ppc->cur_ctrl |= port_init;
+	else								// PPC/ECP
+		ppc->cur_ctrl |= port_sel;
+
+	outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+	outb(ppc->org_data, ppc->lpt_addr);
+
+	outb((ppc->org_ctrl | port_sel), ppc->lpt_addr + 2);
+
+	outb(ppc->org_ctrl, ppc->lpt_addr + 2);
+}
+
+//***************************************************************************
+
+static void ppc6_send_cmd(Interface *ppc, u8 cmd)
+{
+	switch(ppc->mode)
+	{
+		case PPCMODE_UNI_SW :
+		case PPCMODE_UNI_FW :
+		case PPCMODE_BI_SW :
+		case PPCMODE_BI_FW :
+		{
+			outb(cmd, ppc->lpt_addr);
+
+			ppc->cur_ctrl ^= cmd_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+
+		case PPCMODE_EPP_BYTE :
+		case PPCMODE_EPP_WORD :
+		case PPCMODE_EPP_DWORD :
+		{
+			outb(cmd, ppc->lpt_addr + 3);
+
+			break;
+		}
+	}
+}
+
+//***************************************************************************
+
+static void ppc6_wr_data_byte(Interface *ppc, u8 data)
+{
+	switch(ppc->mode)
+	{
+		case PPCMODE_UNI_SW :
+		case PPCMODE_UNI_FW :
+		case PPCMODE_BI_SW :
+		case PPCMODE_BI_FW :
+		{
+			outb(data, ppc->lpt_addr);
+
+			ppc->cur_ctrl ^= data_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+
+		case PPCMODE_EPP_BYTE :
+		case PPCMODE_EPP_WORD :
+		case PPCMODE_EPP_DWORD :
+		{
+			outb(data, ppc->lpt_addr + 4);
+
+			break;
+		}
+	}
+}
+
+//***************************************************************************
+
+static u8 ppc6_rd_data_byte(Interface *ppc)
+{
+	u8 data = 0;
+
+	switch(ppc->mode)
+	{
+		case PPCMODE_UNI_SW :
+		case PPCMODE_UNI_FW :
+		{
+			ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			// DELAY
+
+			data = inb(ppc->lpt_addr + 1);
+
+			data = ((data & 0x80) >> 1) | ((data & 0x38) >> 3);
+
+			ppc->cur_ctrl |= port_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			// DELAY
+
+			data |= inb(ppc->lpt_addr + 1) & 0xB8;
+
+			break;
+		}
+
+		case PPCMODE_BI_SW :
+		case PPCMODE_BI_FW :
+		{
+			ppc->cur_ctrl |= port_dir;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			ppc->cur_ctrl = (ppc->cur_ctrl | port_stb) ^ data_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			data = inb(ppc->lpt_addr);
+
+			ppc->cur_ctrl &= ~port_stb;
+
+			outb(ppc->cur_ctrl,ppc->lpt_addr + 2);
+
+			ppc->cur_ctrl &= ~port_dir;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+
+		case PPCMODE_EPP_BYTE :
+		case PPCMODE_EPP_WORD :
+		case PPCMODE_EPP_DWORD :
+		{
+			outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2);
+
+			data = inb(ppc->lpt_addr + 4);
+
+			outb(ppc->cur_ctrl,ppc->lpt_addr + 2);
+
+			break;
+		}
+	}
+
+	return(data);
+}
+
+//***************************************************************************
+
+static u8 ppc6_rd_port(Interface *ppc, u8 port)
+{
+	ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_READ));
+
+	return(ppc6_rd_data_byte(ppc));
+}
+
+//***************************************************************************
+
+static void ppc6_wr_port(Interface *ppc, u8 port, u8 data)
+{
+	ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_WRITE));
+
+	ppc6_wr_data_byte(ppc, data);
+}
+
+//***************************************************************************
+
+static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count)
+{
+	switch(ppc->mode)
+	{
+		case PPCMODE_UNI_SW :
+		case PPCMODE_UNI_FW :
+		{
+			while(count)
+			{
+				u8 d;
+
+				ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
+
+				outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+				// DELAY
+
+				d = inb(ppc->lpt_addr + 1);
+
+				d = ((d & 0x80) >> 1) | ((d & 0x38) >> 3);
+
+				ppc->cur_ctrl |= port_stb;
+
+				outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+				// DELAY
+
+				d |= inb(ppc->lpt_addr + 1) & 0xB8;
+
+				*data++ = d;
+				count--;
+			}
+
+			break;
+		}
+
+		case PPCMODE_BI_SW :
+		case PPCMODE_BI_FW :
+		{
+			ppc->cur_ctrl |= port_dir;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			ppc->cur_ctrl |= port_stb;
+
+			while(count)
+			{
+				ppc->cur_ctrl ^= data_stb;
+
+				outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+				*data++ = inb(ppc->lpt_addr);
+				count--;
+			}
+
+			ppc->cur_ctrl &= ~port_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			ppc->cur_ctrl &= ~port_dir;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+
+		case PPCMODE_EPP_BYTE :
+		{
+			outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+
+			// DELAY
+
+			while(count)
+			{
+				*data++ = inb(ppc->lpt_addr + 4);
+				count--;
+			}
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+
+		case PPCMODE_EPP_WORD :
+		{
+			outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+
+			// DELAY
+
+			while(count > 1)
+			{
+				*((u16 *)data) = inw(ppc->lpt_addr + 4);
+				data  += 2;
+				count -= 2;
+			}
+
+			while(count)
+			{
+				*data++ = inb(ppc->lpt_addr + 4);
+				count--;
+			}
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+
+		case PPCMODE_EPP_DWORD :
+		{
+			outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2);
+
+			// DELAY
+
+			while(count > 3)
+			{
+				*((u32 *)data) = inl(ppc->lpt_addr + 4);
+				data  += 4;
+				count -= 4;
+			}
+
+			while(count)
+			{
+				*data++ = inb(ppc->lpt_addr + 4);
+				count--;
+			}
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			break;
+		}
+	}
+
+}
+
+//***************************************************************************
+
+static void ppc6_wait_for_fifo(Interface *ppc)
+{
+	int i;
+
+	if (ppc->ppc_flags & fifo_wait)
+	{
+		for(i=0; i<20; i++)
+			inb(ppc->lpt_addr + 1);
+	}
+}
+
+//***************************************************************************
+
+static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count)
+{
+	switch(ppc->mode)
+	{
+		case PPCMODE_UNI_SW :
+		case PPCMODE_BI_SW :
+		{
+			while(count--)
+			{
+				outb(*data++, ppc->lpt_addr);
+
+				ppc->cur_ctrl ^= data_stb;
+
+				outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+			}
+
+			break;
+		}
+
+		case PPCMODE_UNI_FW :
+		case PPCMODE_BI_FW :
+		{
+			u8 this, last;
+
+			ppc6_send_cmd(ppc,(CMD_PREFIX_SET | PREFIX_FASTWR));
+
+			ppc->cur_ctrl |= port_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			last = *data;
+
+			outb(last, ppc->lpt_addr);
+
+			while(count)
+			{
+				this = *data++;
+				count--;
+
+				if (this == last)
+				{
+					ppc->cur_ctrl ^= data_stb;
+
+					outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+				}
+				else
+				{
+					outb(this, ppc->lpt_addr);
+
+					last = this;
+				}
+			}
+
+			ppc->cur_ctrl &= ~port_stb;
+
+			outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+			ppc6_send_cmd(ppc,(CMD_PREFIX_RESET | PREFIX_FASTWR));
+
+			break;
+		}
+
+		case PPCMODE_EPP_BYTE :
+		{
+			while(count)
+			{
+				outb(*data++,ppc->lpt_addr + 4);
+				count--;
+			}
+
+			ppc6_wait_for_fifo(ppc);
+
+			break;
+		}
+
+		case PPCMODE_EPP_WORD :
+		{
+			while(count > 1)
+			{
+				outw(*((u16 *)data),ppc->lpt_addr + 4);
+				data  += 2;
+				count -= 2;
+			}
+
+			while(count)
+			{
+				outb(*data++,ppc->lpt_addr + 4);
+				count--;
+			}
+
+			ppc6_wait_for_fifo(ppc);
+
+			break;
+		}
+
+		case PPCMODE_EPP_DWORD :
+		{
+			while(count > 3)
+			{
+				outl(*((u32 *)data),ppc->lpt_addr + 4);
+				data  += 4;
+				count -= 4;
+			}
+
+			while(count)
+			{
+				outb(*data++,ppc->lpt_addr + 4);
+				count--;
+			}
+
+			ppc6_wait_for_fifo(ppc);
+
+			break;
+		}
+	}
+}
+
+//***************************************************************************
+
+static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length)
+{
+	length = length << 1;
+
+	ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE));
+	ppc6_wr_data_byte(ppc,(u8)length);
+	ppc6_wr_data_byte(ppc,(u8)(length >> 8));
+	ppc6_wr_data_byte(ppc,0);
+
+	ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK));
+
+	ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_READ));
+
+	ppc6_rd_data_blk(ppc, data, length);
+
+	ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK));
+}
+
+//***************************************************************************
+
+static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length)
+{
+	length = length << 1;
+
+	ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE));
+	ppc6_wr_data_byte(ppc,(u8)length);
+	ppc6_wr_data_byte(ppc,(u8)(length >> 8));
+	ppc6_wr_data_byte(ppc,0);
+
+	ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK));
+
+	ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_WRITE));
+
+	ppc6_wr_data_blk(ppc, data, length);
+
+	ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK));
+}
+
+//***************************************************************************
+
+static void ppc6_wr_extout(Interface *ppc, u8 regdata)
+{
+	ppc6_send_cmd(ppc,(REG_VERSION | ACCESS_REG | ACCESS_WRITE));
+
+	ppc6_wr_data_byte(ppc, (u8)((regdata & 0x03) << 6));
+}
+
+//***************************************************************************
+
+static int ppc6_open(Interface *ppc)
+{
+	int ret;
+
+	ret = ppc6_select(ppc);
+
+	if (ret == 0)
+		return(ret);
+
+	ppc->ppc_flags &= ~fifo_wait;
+
+	ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_WRITE | REG_RAMSIZE));
+	ppc6_wr_data_byte(ppc, RAMSIZE_128K);
+
+	ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_READ | REG_VERSION));
+
+	if ((ppc6_rd_data_byte(ppc) & 0x3F) == 0x0C)
+		ppc->ppc_flags |= fifo_wait;
+
+	return(ret);
+}
+
+//***************************************************************************
+
+static void ppc6_close(Interface *ppc)
+{
+	ppc6_deselect(ppc);
+}
+
+//***************************************************************************
+
diff --git a/drivers/block/paride/pseudo.h b/drivers/block/paride/pseudo.h
new file mode 100644
index 00000000..bc370329
--- /dev/null
+++ b/drivers/block/paride/pseudo.h
@@ -0,0 +1,102 @@
+/* 
+        pseudo.h    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                                Under the terms of the GNU General Public License.
+
+	This is the "pseudo-interrupt" logic for parallel port drivers.
+
+        This module is #included into each driver.  It makes one
+        function available:
+
+		ps_set_intr( void (*continuation)(void),
+			     int  (*ready)(void),
+			     int timeout,
+			     int nice )
+
+	Which will arrange for ready() to be evaluated frequently and
+	when either it returns true, or timeout jiffies have passed,
+	continuation() will be invoked.
+
+	If nice is 1, the test will done approximately once a
+	jiffy.  If nice is 0, the test will also be done whenever
+	the scheduler runs (by adding it to a task queue).  If
+	nice is greater than 1, the test will be done once every
+	(nice-1) jiffies. 
+
+*/
+
+/* Changes:
+
+	1.01	1998.05.03	Switched from cli()/sti() to spinlocks
+	1.02    1998.12.14      Added support for nice > 1
+*/
+	
+#define PS_VERSION	"1.02"
+
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+
+static void ps_tq_int(struct work_struct *work);
+
+static void (* ps_continuation)(void);
+static int (* ps_ready)(void);
+static unsigned long ps_timeout;
+static int ps_tq_active = 0;
+static int ps_nice = 0;
+
+static DEFINE_SPINLOCK(ps_spinlock __attribute__((unused)));
+
+static DECLARE_DELAYED_WORK(ps_tq, ps_tq_int);
+
+static void ps_set_intr(void (*continuation)(void), 
+			int (*ready)(void),
+			int timeout, int nice)
+{
+	unsigned long	flags;
+
+	spin_lock_irqsave(&ps_spinlock,flags);
+
+	ps_continuation = continuation;
+	ps_ready = ready;
+	ps_timeout = jiffies + timeout;
+	ps_nice = nice;
+
+	if (!ps_tq_active) {
+		ps_tq_active = 1;
+		if (!ps_nice)
+			schedule_delayed_work(&ps_tq, 0);
+		else
+			schedule_delayed_work(&ps_tq, ps_nice-1);
+	}
+	spin_unlock_irqrestore(&ps_spinlock,flags);
+}
+
+static void ps_tq_int(struct work_struct *work)
+{
+	void (*con)(void);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps_spinlock,flags);
+
+	con = ps_continuation;
+	ps_tq_active = 0;
+
+	if (!con) {
+		spin_unlock_irqrestore(&ps_spinlock,flags);
+		return;
+	}
+	if (!ps_ready || ps_ready() || time_after_eq(jiffies, ps_timeout)) {
+		ps_continuation = NULL;
+		spin_unlock_irqrestore(&ps_spinlock,flags);
+		con();
+		return;
+	}
+	ps_tq_active = 1;
+	if (!ps_nice)
+		schedule_delayed_work(&ps_tq, 0);
+	else
+		schedule_delayed_work(&ps_tq, ps_nice-1);
+	spin_unlock_irqrestore(&ps_spinlock,flags);
+}
+
+/* end of pseudo.h */
+
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
new file mode 100644
index 00000000..2596042e
--- /dev/null
+++ b/drivers/block/paride/pt.c
@@ -0,0 +1,1016 @@
+/* 
+        pt.c    (c) 1998  Grant R. Guenther <grant@torque.net>
+                          Under the terms of the GNU General Public License.
+
+        This is the high-level driver for parallel port ATAPI tape
+        drives based on chips supported by the paride module.
+
+	The driver implements both rewinding and non-rewinding
+	devices, filemarks, and the rewind ioctl.  It allocates
+	a small internal "bounce buffer" for each open device, but
+        otherwise expects buffering and blocking to be done at the
+        user level.  As with most block-structured tapes, short
+	writes are padded to full tape blocks, so reading back a file
+        may return more data than was actually written.
+
+        By default, the driver will autoprobe for a single parallel
+        port ATAPI tape drive, but if their individual parameters are
+        specified, the driver can handle up to 4 drives.
+
+	The rewinding devices are named /dev/pt0, /dev/pt1, ...
+	while the non-rewinding devices are /dev/npt0, /dev/npt1, etc.
+
+        The behaviour of the pt driver can be altered by setting
+        some parameters from the insmod command line.  The following
+        parameters are adjustable:
+
+            drive0      These four arguments can be arrays of       
+            drive1      1-6 integers as follows:
+            drive2
+            drive3      <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
+
+                        Where,
+
+                <prt>   is the base of the parallel port address for
+                        the corresponding drive.  (required)
+
+                <pro>   is the protocol number for the adapter that
+                        supports this drive.  These numbers are
+                        logged by 'paride' when the protocol modules
+                        are initialised.  (0 if not given)
+
+                <uni>   for those adapters that support chained
+                        devices, this is the unit selector for the
+                        chain of devices on the given port.  It should
+                        be zero for devices that don't support chaining.
+                        (0 if not given)
+
+                <mod>   this can be -1 to choose the best mode, or one
+                        of the mode numbers supported by the adapter.
+                        (-1 if not given)
+
+                <slv>   ATAPI devices can be jumpered to master or slave.
+                        Set this to 0 to choose the master drive, 1 to
+                        choose the slave, -1 (the default) to choose the
+                        first drive found.
+
+                <dly>   some parallel ports require the driver to 
+                        go more slowly.  -1 sets a default value that
+                        should work with the chosen protocol.  Otherwise,
+                        set this to a small integer, the larger it is
+                        the slower the port i/o.  In some cases, setting
+                        this to zero will speed up the device. (default -1)
+
+	    major	You may use this parameter to overide the
+			default major number (96) that this driver
+			will use.  Be sure to change the device
+			name as well.
+
+	    name	This parameter is a character string that
+			contains the name the kernel will use for this
+			device (in /proc output, for instance).
+			(default "pt").
+
+            verbose     This parameter controls the amount of logging
+                        that the driver will do.  Set it to 0 for
+                        normal operation, 1 to see autoprobe progress
+                        messages, or 2 to see additional debugging
+                        output.  (default 0)
+ 
+        If this driver is built into the kernel, you can use 
+        the following command line parameters, with the same values
+        as the corresponding module parameters listed above:
+
+            pt.drive0
+            pt.drive1
+            pt.drive2
+            pt.drive3
+
+        In addition, you can use the parameter pt.disable to disable
+        the driver entirely.
+
+*/
+
+/*   Changes:
+
+	1.01	GRG 1998.05.06	Round up transfer size, fix ready_wait,
+			        loosed interpretation of ATAPI standard
+				for clearing error status.
+				Eliminate sti();
+	1.02    GRG 1998.06.16  Eliminate an Ugh.
+	1.03    GRG 1998.08.15  Adjusted PT_TMO, use HZ in loop timing,
+				extra debugging
+	1.04    GRG 1998.09.24  Repair minor coding error, added jumbo support
+	
+*/
+
+#define PT_VERSION      "1.04"
+#define PT_MAJOR	96
+#define PT_NAME		"pt"
+#define PT_UNITS	4
+
+#include <linux/types.h>
+
+/* Here are things one can override from the insmod command.
+   Most are autoprobed by paride unless set here.  Verbose is on
+   by default.
+
+*/
+
+static bool verbose = 0;
+static int major = PT_MAJOR;
+static char *name = PT_NAME;
+static int disable = 0;
+
+static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
+
+static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
+
+#define D_PRT   0
+#define D_PRO   1
+#define D_UNI   2
+#define D_MOD   3
+#define D_SLV   4
+#define D_DLY   5
+
+#define DU              (*drives[unit])
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mtio.h>
+#include <linux/device.h>
+#include <linux/sched.h>	/* current, TASK_*, schedule_timeout() */
+#include <linux/mutex.h>
+
+#include <asm/uaccess.h>
+
+module_param(verbose, bool, 0);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+
+#define PT_MAX_RETRIES  5
+#define PT_TMO          3000	/* interrupt timeout in jiffies */
+#define PT_SPIN_DEL     50	/* spin delay in micro-seconds  */
+#define PT_RESET_TMO    30	/* 30 seconds */
+#define PT_READY_TMO	60	/* 60 seconds */
+#define PT_REWIND_TMO	1200	/* 20 minutes */
+
+#define PT_SPIN         ((1000000/(HZ*PT_SPIN_DEL))*PT_TMO)
+
+#define STAT_ERR        0x00001
+#define STAT_INDEX      0x00002
+#define STAT_ECC        0x00004
+#define STAT_DRQ        0x00008
+#define STAT_SEEK       0x00010
+#define STAT_WRERR      0x00020
+#define STAT_READY      0x00040
+#define STAT_BUSY       0x00080
+#define STAT_SENSE	0x1f000
+
+#define ATAPI_TEST_READY	0x00
+#define ATAPI_REWIND		0x01
+#define ATAPI_REQ_SENSE		0x03
+#define ATAPI_READ_6		0x08
+#define ATAPI_WRITE_6		0x0a
+#define ATAPI_WFM		0x10
+#define ATAPI_IDENTIFY		0x12
+#define ATAPI_MODE_SENSE	0x1a
+#define ATAPI_LOG_SENSE		0x4d
+
+static DEFINE_MUTEX(pt_mutex);
+static int pt_open(struct inode *inode, struct file *file);
+static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static int pt_release(struct inode *inode, struct file *file);
+static ssize_t pt_read(struct file *filp, char __user *buf,
+		       size_t count, loff_t * ppos);
+static ssize_t pt_write(struct file *filp, const char __user *buf,
+			size_t count, loff_t * ppos);
+static int pt_detect(void);
+
+/* bits in tape->flags */
+
+#define PT_MEDIA	1
+#define PT_WRITE_OK	2
+#define PT_REWIND	4
+#define PT_WRITING      8
+#define PT_READING     16
+#define PT_EOF	       32
+
+#define PT_NAMELEN      8
+#define PT_BUFSIZE  16384
+
+struct pt_unit {
+	struct pi_adapter pia;	/* interface to paride layer */
+	struct pi_adapter *pi;
+	int flags;		/* various state flags */
+	int last_sense;		/* result of last request sense */
+	int drive;		/* drive */
+	atomic_t available;	/* 1 if access is available 0 otherwise */
+	int bs;			/* block size */
+	int capacity;		/* Size of tape in KB */
+	int present;		/* device present ? */
+	char *bufptr;
+	char name[PT_NAMELEN];	/* pf0, pf1, ... */
+};
+
+static int pt_identify(struct pt_unit *tape);
+
+static struct pt_unit pt[PT_UNITS];
+
+static char pt_scratch[512];	/* scratch block buffer */
+
+/* kernel glue structures */
+
+static const struct file_operations pt_fops = {
+	.owner = THIS_MODULE,
+	.read = pt_read,
+	.write = pt_write,
+	.unlocked_ioctl = pt_ioctl,
+	.open = pt_open,
+	.release = pt_release,
+	.llseek = noop_llseek,
+};
+
+/* sysfs class support */
+static struct class *pt_class;
+
+static inline int status_reg(struct pi_adapter *pi)
+{
+	return pi_read_regr(pi, 1, 6);
+}
+
+static inline int read_reg(struct pi_adapter *pi, int reg)
+{
+	return pi_read_regr(pi, 0, reg);
+}
+
+static inline void write_reg(struct pi_adapter *pi, int reg, int val)
+{
+	pi_write_regr(pi, 0, reg, val);
+}
+
+static inline u8 DRIVE(struct pt_unit *tape)
+{
+	return 0xa0+0x10*tape->drive;
+}
+
+static int pt_wait(struct pt_unit *tape, int go, int stop, char *fun, char *msg)
+{
+	int j, r, e, s, p;
+	struct pi_adapter *pi = tape->pi;
+
+	j = 0;
+	while ((((r = status_reg(pi)) & go) || (stop && (!(r & stop))))
+	       && (j++ < PT_SPIN))
+		udelay(PT_SPIN_DEL);
+
+	if ((r & (STAT_ERR & stop)) || (j > PT_SPIN)) {
+		s = read_reg(pi, 7);
+		e = read_reg(pi, 1);
+		p = read_reg(pi, 2);
+		if (j > PT_SPIN)
+			e |= 0x100;
+		if (fun)
+			printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
+			       " loop=%d phase=%d\n",
+			       tape->name, fun, msg, r, s, e, j, p);
+		return (e << 8) + s;
+	}
+	return 0;
+}
+
+static int pt_command(struct pt_unit *tape, char *cmd, int dlen, char *fun)
+{
+	struct pi_adapter *pi = tape->pi;
+	pi_connect(pi);
+
+	write_reg(pi, 6, DRIVE(tape));
+
+	if (pt_wait(tape, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
+		pi_disconnect(pi);
+		return -1;
+	}
+
+	write_reg(pi, 4, dlen % 256);
+	write_reg(pi, 5, dlen / 256);
+	write_reg(pi, 7, 0xa0);	/* ATAPI packet command */
+
+	if (pt_wait(tape, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
+		pi_disconnect(pi);
+		return -1;
+	}
+
+	if (read_reg(pi, 2) != 1) {
+		printk("%s: %s: command phase error\n", tape->name, fun);
+		pi_disconnect(pi);
+		return -1;
+	}
+
+	pi_write_block(pi, cmd, 12);
+
+	return 0;
+}
+
+static int pt_completion(struct pt_unit *tape, char *buf, char *fun)
+{
+	struct pi_adapter *pi = tape->pi;
+	int r, s, n, p;
+
+	r = pt_wait(tape, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+		    fun, "completion");
+
+	if (read_reg(pi, 7) & STAT_DRQ) {
+		n = (((read_reg(pi, 4) + 256 * read_reg(pi, 5)) +
+		      3) & 0xfffc);
+		p = read_reg(pi, 2) & 3;
+		if (p == 0)
+			pi_write_block(pi, buf, n);
+		if (p == 2)
+			pi_read_block(pi, buf, n);
+	}
+
+	s = pt_wait(tape, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
+
+	pi_disconnect(pi);
+
+	return (r ? r : s);
+}
+
+static void pt_req_sense(struct pt_unit *tape, int quiet)
+{
+	char rs_cmd[12] = { ATAPI_REQ_SENSE, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
+	char buf[16];
+	int r;
+
+	r = pt_command(tape, rs_cmd, 16, "Request sense");
+	mdelay(1);
+	if (!r)
+		pt_completion(tape, buf, "Request sense");
+
+	tape->last_sense = -1;
+	if (!r) {
+		if (!quiet)
+			printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
+			       tape->name, buf[2] & 0xf, buf[12], buf[13]);
+		tape->last_sense = (buf[2] & 0xf) | ((buf[12] & 0xff) << 8)
+		    | ((buf[13] & 0xff) << 16);
+	}
+}
+
+static int pt_atapi(struct pt_unit *tape, char *cmd, int dlen, char *buf, char *fun)
+{
+	int r;
+
+	r = pt_command(tape, cmd, dlen, fun);
+	mdelay(1);
+	if (!r)
+		r = pt_completion(tape, buf, fun);
+	if (r)
+		pt_req_sense(tape, !fun);
+
+	return r;
+}
+
+static void pt_sleep(int cs)
+{
+	schedule_timeout_interruptible(cs);
+}
+
+static int pt_poll_dsc(struct pt_unit *tape, int pause, int tmo, char *msg)
+{
+	struct pi_adapter *pi = tape->pi;
+	int k, e, s;
+
+	k = 0;
+	e = 0;
+	s = 0;
+	while (k < tmo) {
+		pt_sleep(pause);
+		k++;
+		pi_connect(pi);
+		write_reg(pi, 6, DRIVE(tape));
+		s = read_reg(pi, 7);
+		e = read_reg(pi, 1);
+		pi_disconnect(pi);
+		if (s & (STAT_ERR | STAT_SEEK))
+			break;
+	}
+	if ((k >= tmo) || (s & STAT_ERR)) {
+		if (k >= tmo)
+			printk("%s: %s DSC timeout\n", tape->name, msg);
+		else
+			printk("%s: %s stat=0x%x err=0x%x\n", tape->name, msg, s,
+			       e);
+		pt_req_sense(tape, 0);
+		return 0;
+	}
+	return 1;
+}
+
+static void pt_media_access_cmd(struct pt_unit *tape, int tmo, char *cmd, char *fun)
+{
+	if (pt_command(tape, cmd, 0, fun)) {
+		pt_req_sense(tape, 0);
+		return;
+	}
+	pi_disconnect(tape->pi);
+	pt_poll_dsc(tape, HZ, tmo, fun);
+}
+
+static void pt_rewind(struct pt_unit *tape)
+{
+	char rw_cmd[12] = { ATAPI_REWIND, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+	pt_media_access_cmd(tape, PT_REWIND_TMO, rw_cmd, "rewind");
+}
+
+static void pt_write_fm(struct pt_unit *tape)
+{
+	char wm_cmd[12] = { ATAPI_WFM, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0 };
+
+	pt_media_access_cmd(tape, PT_TMO, wm_cmd, "write filemark");
+}
+
+#define DBMSG(msg)      ((verbose>1)?(msg):NULL)
+
+static int pt_reset(struct pt_unit *tape)
+{
+	struct pi_adapter *pi = tape->pi;
+	int i, k, flg;
+	int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+
+	pi_connect(pi);
+	write_reg(pi, 6, DRIVE(tape));
+	write_reg(pi, 7, 8);
+
+	pt_sleep(20 * HZ / 1000);
+
+	k = 0;
+	while ((k++ < PT_RESET_TMO) && (status_reg(pi) & STAT_BUSY))
+		pt_sleep(HZ / 10);
+
+	flg = 1;
+	for (i = 0; i < 5; i++)
+		flg &= (read_reg(pi, i + 1) == expect[i]);
+
+	if (verbose) {
+		printk("%s: Reset (%d) signature = ", tape->name, k);
+		for (i = 0; i < 5; i++)
+			printk("%3x", read_reg(pi, i + 1));
+		if (!flg)
+			printk(" (incorrect)");
+		printk("\n");
+	}
+
+	pi_disconnect(pi);
+	return flg - 1;
+}
+
+static int pt_ready_wait(struct pt_unit *tape, int tmo)
+{
+	char tr_cmd[12] = { ATAPI_TEST_READY, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+	int k, p;
+
+	k = 0;
+	while (k < tmo) {
+		tape->last_sense = 0;
+		pt_atapi(tape, tr_cmd, 0, NULL, DBMSG("test unit ready"));
+		p = tape->last_sense;
+		if (!p)
+			return 0;
+		if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6)))
+			return p;
+		k++;
+		pt_sleep(HZ);
+	}
+	return 0x000020;	/* timeout */
+}
+
+static void xs(char *buf, char *targ, int offs, int len)
+{
+	int j, k, l;
+
+	j = 0;
+	l = 0;
+	for (k = 0; k < len; k++)
+		if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
+			l = targ[j++] = buf[k + offs];
+	if (l == 0x20)
+		j--;
+	targ[j] = 0;
+}
+
+static int xn(char *buf, int offs, int size)
+{
+	int v, k;
+
+	v = 0;
+	for (k = 0; k < size; k++)
+		v = v * 256 + (buf[k + offs] & 0xff);
+	return v;
+}
+
+static int pt_identify(struct pt_unit *tape)
+{
+	int dt, s;
+	char *ms[2] = { "master", "slave" };
+	char mf[10], id[18];
+	char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+	char ms_cmd[12] =
+	    { ATAPI_MODE_SENSE, 0, 0x2a, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+	char ls_cmd[12] =
+	    { ATAPI_LOG_SENSE, 0, 0x71, 0, 0, 0, 0, 0, 36, 0, 0, 0 };
+	char buf[36];
+
+	s = pt_atapi(tape, id_cmd, 36, buf, "identify");
+	if (s)
+		return -1;
+
+	dt = buf[0] & 0x1f;
+	if (dt != 1) {
+		if (verbose)
+			printk("%s: Drive %d, unsupported type %d\n",
+			       tape->name, tape->drive, dt);
+		return -1;
+	}
+
+	xs(buf, mf, 8, 8);
+	xs(buf, id, 16, 16);
+
+	tape->flags = 0;
+	tape->capacity = 0;
+	tape->bs = 0;
+
+	if (!pt_ready_wait(tape, PT_READY_TMO))
+		tape->flags |= PT_MEDIA;
+
+	if (!pt_atapi(tape, ms_cmd, 36, buf, "mode sense")) {
+		if (!(buf[2] & 0x80))
+			tape->flags |= PT_WRITE_OK;
+		tape->bs = xn(buf, 10, 2);
+	}
+
+	if (!pt_atapi(tape, ls_cmd, 36, buf, "log sense"))
+		tape->capacity = xn(buf, 24, 4);
+
+	printk("%s: %s %s, %s", tape->name, mf, id, ms[tape->drive]);
+	if (!(tape->flags & PT_MEDIA))
+		printk(", no media\n");
+	else {
+		if (!(tape->flags & PT_WRITE_OK))
+			printk(", RO");
+		printk(", blocksize %d, %d MB\n", tape->bs, tape->capacity / 1024);
+	}
+
+	return 0;
+}
+
+
+/*
+ * returns  0, with id set if drive is detected
+ *	   -1, if drive detection failed
+ */
+static int pt_probe(struct pt_unit *tape)
+{
+	if (tape->drive == -1) {
+		for (tape->drive = 0; tape->drive <= 1; tape->drive++)
+			if (!pt_reset(tape))
+				return pt_identify(tape);
+	} else {
+		if (!pt_reset(tape))
+			return pt_identify(tape);
+	}
+	return -1;
+}
+
+static int pt_detect(void)
+{
+	struct pt_unit *tape;
+	int specified = 0, found = 0;
+	int unit;
+
+	printk("%s: %s version %s, major %d\n", name, name, PT_VERSION, major);
+
+	specified = 0;
+	for (unit = 0; unit < PT_UNITS; unit++) {
+		struct pt_unit *tape = &pt[unit];
+		tape->pi = &tape->pia;
+		atomic_set(&tape->available, 1);
+		tape->flags = 0;
+		tape->last_sense = 0;
+		tape->present = 0;
+		tape->bufptr = NULL;
+		tape->drive = DU[D_SLV];
+		snprintf(tape->name, PT_NAMELEN, "%s%d", name, unit);
+		if (!DU[D_PRT])
+			continue;
+		specified++;
+		if (pi_init(tape->pi, 0, DU[D_PRT], DU[D_MOD], DU[D_UNI],
+		     DU[D_PRO], DU[D_DLY], pt_scratch, PI_PT,
+		     verbose, tape->name)) {
+			if (!pt_probe(tape)) {
+				tape->present = 1;
+				found++;
+			} else
+				pi_release(tape->pi);
+		}
+	}
+	if (specified == 0) {
+		tape = pt;
+		if (pi_init(tape->pi, 1, -1, -1, -1, -1, -1, pt_scratch,
+			    PI_PT, verbose, tape->name)) {
+			if (!pt_probe(tape)) {
+				tape->present = 1;
+				found++;
+			} else
+				pi_release(tape->pi);
+		}
+
+	}
+	if (found)
+		return 0;
+
+	printk("%s: No ATAPI tape drive detected\n", name);
+	return -1;
+}
+
+static int pt_open(struct inode *inode, struct file *file)
+{
+	int unit = iminor(inode) & 0x7F;
+	struct pt_unit *tape = pt + unit;
+	int err;
+
+	mutex_lock(&pt_mutex);
+	if (unit >= PT_UNITS || (!tape->present)) {
+		mutex_unlock(&pt_mutex);
+		return -ENODEV;
+	}
+
+	err = -EBUSY;
+	if (!atomic_dec_and_test(&tape->available))
+		goto out;
+
+	pt_identify(tape);
+
+	err = -ENODEV;
+	if (!(tape->flags & PT_MEDIA))
+		goto out;
+
+	err = -EROFS;
+	if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & FMODE_WRITE))
+		goto out;
+
+	if (!(iminor(inode) & 128))
+		tape->flags |= PT_REWIND;
+
+	err = -ENOMEM;
+	tape->bufptr = kmalloc(PT_BUFSIZE, GFP_KERNEL);
+	if (tape->bufptr == NULL) {
+		printk("%s: buffer allocation failed\n", tape->name);
+		goto out;
+	}
+
+	file->private_data = tape;
+	mutex_unlock(&pt_mutex);
+	return 0;
+
+out:
+	atomic_inc(&tape->available);
+	mutex_unlock(&pt_mutex);
+	return err;
+}
+
+static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct pt_unit *tape = file->private_data;
+	struct mtop __user *p = (void __user *)arg;
+	struct mtop mtop;
+
+	switch (cmd) {
+	case MTIOCTOP:
+		if (copy_from_user(&mtop, p, sizeof(struct mtop)))
+			return -EFAULT;
+
+		switch (mtop.mt_op) {
+
+		case MTREW:
+			mutex_lock(&pt_mutex);
+			pt_rewind(tape);
+			mutex_unlock(&pt_mutex);
+			return 0;
+
+		case MTWEOF:
+			mutex_lock(&pt_mutex);
+			pt_write_fm(tape);
+			mutex_unlock(&pt_mutex);
+			return 0;
+
+		default:
+			/* FIXME: rate limit ?? */
+			printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name,
+			       mtop.mt_op);
+			return -EINVAL;
+		}
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int
+pt_release(struct inode *inode, struct file *file)
+{
+	struct pt_unit *tape = file->private_data;
+
+	if (atomic_read(&tape->available) > 1)
+		return -EINVAL;
+
+	if (tape->flags & PT_WRITING)
+		pt_write_fm(tape);
+
+	if (tape->flags & PT_REWIND)
+		pt_rewind(tape);
+
+	kfree(tape->bufptr);
+	tape->bufptr = NULL;
+
+	atomic_inc(&tape->available);
+
+	return 0;
+
+}
+
+static ssize_t pt_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
+{
+	struct pt_unit *tape = filp->private_data;
+	struct pi_adapter *pi = tape->pi;
+	char rd_cmd[12] = { ATAPI_READ_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+	int k, n, r, p, s, t, b;
+
+	if (!(tape->flags & (PT_READING | PT_WRITING))) {
+		tape->flags |= PT_READING;
+		if (pt_atapi(tape, rd_cmd, 0, NULL, "start read-ahead"))
+			return -EIO;
+	} else if (tape->flags & PT_WRITING)
+		return -EIO;
+
+	if (tape->flags & PT_EOF)
+		return 0;
+
+	t = 0;
+
+	while (count > 0) {
+
+		if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "read"))
+			return -EIO;
+
+		n = count;
+		if (n > 32768)
+			n = 32768;	/* max per command */
+		b = (n - 1 + tape->bs) / tape->bs;
+		n = b * tape->bs;	/* rounded up to even block */
+
+		rd_cmd[4] = b;
+
+		r = pt_command(tape, rd_cmd, n, "read");
+
+		mdelay(1);
+
+		if (r) {
+			pt_req_sense(tape, 0);
+			return -EIO;
+		}
+
+		while (1) {
+
+			r = pt_wait(tape, STAT_BUSY,
+				    STAT_DRQ | STAT_ERR | STAT_READY,
+				    DBMSG("read DRQ"), "");
+
+			if (r & STAT_SENSE) {
+				pi_disconnect(pi);
+				pt_req_sense(tape, 0);
+				return -EIO;
+			}
+
+			if (r)
+				tape->flags |= PT_EOF;
+
+			s = read_reg(pi, 7);
+
+			if (!(s & STAT_DRQ))
+				break;
+
+			n = (read_reg(pi, 4) + 256 * read_reg(pi, 5));
+			p = (read_reg(pi, 2) & 3);
+			if (p != 2) {
+				pi_disconnect(pi);
+				printk("%s: Phase error on read: %d\n", tape->name,
+				       p);
+				return -EIO;
+			}
+
+			while (n > 0) {
+				k = n;
+				if (k > PT_BUFSIZE)
+					k = PT_BUFSIZE;
+				pi_read_block(pi, tape->bufptr, k);
+				n -= k;
+				b = k;
+				if (b > count)
+					b = count;
+				if (copy_to_user(buf + t, tape->bufptr, b)) {
+					pi_disconnect(pi);
+					return -EFAULT;
+				}
+				t += b;
+				count -= b;
+			}
+
+		}
+		pi_disconnect(pi);
+		if (tape->flags & PT_EOF)
+			break;
+	}
+
+	return t;
+
+}
+
+static ssize_t pt_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
+{
+	struct pt_unit *tape = filp->private_data;
+	struct pi_adapter *pi = tape->pi;
+	char wr_cmd[12] = { ATAPI_WRITE_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+	int k, n, r, p, s, t, b;
+
+	if (!(tape->flags & PT_WRITE_OK))
+		return -EROFS;
+
+	if (!(tape->flags & (PT_READING | PT_WRITING))) {
+		tape->flags |= PT_WRITING;
+		if (pt_atapi
+		    (tape, wr_cmd, 0, NULL, "start buffer-available mode"))
+			return -EIO;
+	} else if (tape->flags & PT_READING)
+		return -EIO;
+
+	if (tape->flags & PT_EOF)
+		return -ENOSPC;
+
+	t = 0;
+
+	while (count > 0) {
+
+		if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "write"))
+			return -EIO;
+
+		n = count;
+		if (n > 32768)
+			n = 32768;	/* max per command */
+		b = (n - 1 + tape->bs) / tape->bs;
+		n = b * tape->bs;	/* rounded up to even block */
+
+		wr_cmd[4] = b;
+
+		r = pt_command(tape, wr_cmd, n, "write");
+
+		mdelay(1);
+
+		if (r) {	/* error delivering command only */
+			pt_req_sense(tape, 0);
+			return -EIO;
+		}
+
+		while (1) {
+
+			r = pt_wait(tape, STAT_BUSY,
+				    STAT_DRQ | STAT_ERR | STAT_READY,
+				    DBMSG("write DRQ"), NULL);
+
+			if (r & STAT_SENSE) {
+				pi_disconnect(pi);
+				pt_req_sense(tape, 0);
+				return -EIO;
+			}
+
+			if (r)
+				tape->flags |= PT_EOF;
+
+			s = read_reg(pi, 7);
+
+			if (!(s & STAT_DRQ))
+				break;
+
+			n = (read_reg(pi, 4) + 256 * read_reg(pi, 5));
+			p = (read_reg(pi, 2) & 3);
+			if (p != 0) {
+				pi_disconnect(pi);
+				printk("%s: Phase error on write: %d \n",
+				       tape->name, p);
+				return -EIO;
+			}
+
+			while (n > 0) {
+				k = n;
+				if (k > PT_BUFSIZE)
+					k = PT_BUFSIZE;
+				b = k;
+				if (b > count)
+					b = count;
+				if (copy_from_user(tape->bufptr, buf + t, b)) {
+					pi_disconnect(pi);
+					return -EFAULT;
+				}
+				pi_write_block(pi, tape->bufptr, k);
+				t += b;
+				count -= b;
+				n -= k;
+			}
+
+		}
+		pi_disconnect(pi);
+		if (tape->flags & PT_EOF)
+			break;
+	}
+
+	return t;
+}
+
+static int __init pt_init(void)
+{
+	int unit;
+	int err;
+
+	if (disable) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (pt_detect()) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	err = register_chrdev(major, name, &pt_fops);
+	if (err < 0) {
+		printk("pt_init: unable to get major number %d\n", major);
+		for (unit = 0; unit < PT_UNITS; unit++)
+			if (pt[unit].present)
+				pi_release(pt[unit].pi);
+		goto out;
+	}
+	major = err;
+	pt_class = class_create(THIS_MODULE, "pt");
+	if (IS_ERR(pt_class)) {
+		err = PTR_ERR(pt_class);
+		goto out_chrdev;
+	}
+
+	for (unit = 0; unit < PT_UNITS; unit++)
+		if (pt[unit].present) {
+			device_create(pt_class, NULL, MKDEV(major, unit), NULL,
+				      "pt%d", unit);
+			device_create(pt_class, NULL, MKDEV(major, unit + 128),
+				      NULL, "pt%dn", unit);
+		}
+	goto out;
+
+out_chrdev:
+	unregister_chrdev(major, "pt");
+out:
+	return err;
+}
+
+static void __exit pt_exit(void)
+{
+	int unit;
+	for (unit = 0; unit < PT_UNITS; unit++)
+		if (pt[unit].present) {
+			device_destroy(pt_class, MKDEV(major, unit));
+			device_destroy(pt_class, MKDEV(major, unit + 128));
+		}
+	class_destroy(pt_class);
+	unregister_chrdev(major, name);
+	for (unit = 0; unit < PT_UNITS; unit++)
+		if (pt[unit].present)
+			pi_release(pt[unit].pi);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pt_init)
+module_exit(pt_exit)