diff options
Diffstat (limited to 'drivers/block/paride/Kconfig')
| -rw-r--r-- | drivers/block/paride/Kconfig | 300 |
1 files changed, 300 insertions, 0 deletions
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig new file mode 100644 index 00000000..28cf3082 --- /dev/null +++ b/drivers/block/paride/Kconfig @@ -0,0 +1,300 @@ +# +# PARIDE configuration +# +# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module, +# PARIDE must also be a module. +# PARIDE only supports PC style parports. Tough for USB or other parports... + +comment "Parallel IDE high-level drivers" + depends on PARIDE + +config PARIDE_PD + tristate "Parallel port IDE disks" + depends on PARIDE + help + This option enables the high-level driver for IDE-type disk devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port IDE driver, otherwise you should answer M to build + it as a loadable module. The module will be called pd. You + must also have at least one parallel port protocol driver in your + system. Among the devices supported by this driver are the SyQuest + EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack + hard drives from MicroSolutions. + +config PARIDE_PCD + tristate "Parallel port ATAPI CD-ROMs" + depends on PARIDE + ---help--- + This option enables the high-level driver for ATAPI CD-ROM devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port ATAPI CD-ROM driver, otherwise you should answer M to + build it as a loadable module. The module will be called pcd. You + must also have at least one parallel port protocol driver in your + system. Among the devices supported by this driver are the + MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If + you have such a CD-ROM drive, you should also say Y or M to "ISO + 9660 CD-ROM file system support" below, because that's the file + system used on CD-ROMs. + +config PARIDE_PF + tristate "Parallel port ATAPI disks" + depends on PARIDE + help + This option enables the high-level driver for ATAPI disk devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port ATAPI disk driver, otherwise you should answer M + to build it as a loadable module. The module will be called pf. + You must also have at least one parallel port protocol driver in + your system. Among the devices supported by this driver are the + MicroSolutions backpack PD/CD drive and the Imation Superdisk + LS-120 drive. + +config PARIDE_PT + tristate "Parallel port ATAPI tapes" + depends on PARIDE + help + This option enables the high-level driver for ATAPI tape devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port ATAPI disk driver, otherwise you should answer M + to build it as a loadable module. The module will be called pt. + You must also have at least one parallel port protocol driver in + your system. Among the devices supported by this driver is the + parallel port version of the HP 5GB drive. + +config PARIDE_PG + tristate "Parallel port generic ATAPI devices" + depends on PARIDE + ---help--- + This option enables a special high-level driver for generic ATAPI + devices connected through a parallel port. The driver allows user + programs, such as cdrtools, to send ATAPI commands directly to a + device. + + If you chose to build PARIDE support into your kernel, you may + answer Y here to build in the parallel port generic ATAPI driver, + otherwise you should answer M to build it as a loadable module. The + module will be called pg. + + You must also have at least one parallel port protocol driver in + your system. + + This driver implements an API loosely related to the generic SCSI + driver. See <file:include/linux/pg.h>. for details. + + You can obtain the most recent version of cdrtools from + <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and + later fully support this driver. + +comment "Parallel IDE protocol modules" + depends on PARIDE + +config PARIDE_ATEN + tristate "ATEN EH-100 protocol" + depends on PARIDE + help + This option enables support for the ATEN EH-100 parallel port IDE + protocol. This protocol is used in some inexpensive low performance + parallel port kits made in Hong Kong. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + protocol driver, otherwise you should answer M to build it as a + loadable module. The module will be called aten. You must also + have a high-level driver for the type of device that you want to + support. + +config PARIDE_BPCK + tristate "MicroSolutions backpack (Series 5) protocol" + depends on PARIDE + ---help--- + This option enables support for the Micro Solutions BACKPACK + parallel port Series 5 IDE protocol. (Most BACKPACK drives made + before 1999 were Series 5) Series 5 drives will NOT always have the + Series noted on the bottom of the drive. Series 6 drivers will. + + In other words, if your BACKPACK drive doesn't say "Series 6" on the + bottom, enable this option. + + If you chose to build PARIDE support into your kernel, you may + answer Y here to build in the protocol driver, otherwise you should + answer M to build it as a loadable module. The module will be + called bpck. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_BPCK6 + tristate "MicroSolutions backpack (Series 6) protocol" + depends on PARIDE && !64BIT + ---help--- + This option enables support for the Micro Solutions BACKPACK + parallel port Series 6 IDE protocol. (Most BACKPACK drives made + after 1999 were Series 6) Series 6 drives will have the Series noted + on the bottom of the drive. Series 5 drivers don't always have it + noted. + + In other words, if your BACKPACK drive says "Series 6" on the + bottom, enable this option. + + If you chose to build PARIDE support into your kernel, you may + answer Y here to build in the protocol driver, otherwise you should + answer M to build it as a loadable module. The module will be + called bpck6. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_COMM + tristate "DataStor Commuter protocol" + depends on PARIDE + help + This option enables support for the Commuter parallel port IDE + protocol from DataStor. If you chose to build PARIDE support + into your kernel, you may answer Y here to build in the protocol + driver, otherwise you should answer M to build it as a loadable + module. The module will be called comm. You must also have + a high-level driver for the type of device that you want to support. + +config PARIDE_DSTR + tristate "DataStor EP-2000 protocol" + depends on PARIDE + help + This option enables support for the EP-2000 parallel port IDE + protocol from DataStor. If you chose to build PARIDE support + into your kernel, you may answer Y here to build in the protocol + driver, otherwise you should answer M to build it as a loadable + module. The module will be called dstr. You must also have + a high-level driver for the type of device that you want to support. + +config PARIDE_FIT2 + tristate "FIT TD-2000 protocol" + depends on PARIDE + help + This option enables support for the TD-2000 parallel port IDE + protocol from Fidelity International Technology. This is a simple + (low speed) adapter that is used in some portable hard drives. If + you chose to build PARIDE support into your kernel, you may answer Y + here to build in the protocol driver, otherwise you should answer M + to build it as a loadable module. The module will be called ktti. + You must also have a high-level driver for the type of device that + you want to support. + +config PARIDE_FIT3 + tristate "FIT TD-3000 protocol" + depends on PARIDE + help + This option enables support for the TD-3000 parallel port IDE + protocol from Fidelity International Technology. This protocol is + used in newer models of their portable disk, CD-ROM and PD/CD + devices. If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called fit3. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_EPAT + tristate "Shuttle EPAT/EPEZ protocol" + depends on PARIDE + help + This option enables support for the EPAT parallel port IDE protocol. + EPAT is a parallel port IDE adapter manufactured by Shuttle + Technology and widely used in devices from major vendors such as + Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build + PARIDE support into your kernel, you may answer Y here to build in + the protocol driver, otherwise you should answer M to build it as a + loadable module. The module will be called epat. You must also + have a high-level driver for the type of device that you want to + support. + +config PARIDE_EPATC8 + bool "Support c7/c8 chips (EXPERIMENTAL)" + depends on PARIDE_EPAT && EXPERIMENTAL + help + This option enables support for the newer Shuttle EP1284 (aka c7 and + c8) chip. You need this if you are using any recent Imation SuperDisk + (LS-120) drive. + +config PARIDE_EPIA + tristate "Shuttle EPIA protocol" + depends on PARIDE + help + This option enables support for the (obsolete) EPIA parallel port + IDE protocol from Shuttle Technology. This adapter can still be + found in some no-name kits. If you chose to build PARIDE support + into your kernel, you may answer Y here to build in the protocol + driver, otherwise you should answer M to build it as a loadable + module. The module will be called epia. You must also have a + high-level driver for the type of device that you want to support. + +config PARIDE_FRIQ + tristate "Freecom IQ ASIC-2 protocol" + depends on PARIDE + help + This option enables support for version 2 of the Freecom IQ parallel + port IDE adapter. This adapter is used by the Maxell Superdisk + drive. If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called friq. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_FRPW + tristate "FreeCom power protocol" + depends on PARIDE + help + This option enables support for the Freecom power parallel port IDE + protocol. If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called frpw. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_KBIC + tristate "KingByte KBIC-951A/971A protocols" + depends on PARIDE + help + This option enables support for the KBIC-951A and KBIC-971A parallel + port IDE protocols from KingByte Information Corp. KingByte's + adapters appear in many no-name portable disk and CD-ROM products, + especially in Europe. If you chose to build PARIDE support into your + kernel, you may answer Y here to build in the protocol driver, + otherwise you should answer M to build it as a loadable module. The + module will be called kbic. You must also have a high-level driver + for the type of device that you want to support. + +config PARIDE_KTTI + tristate "KT PHd protocol" + depends on PARIDE + help + This option enables support for the "PHd" parallel port IDE protocol + from KT Technology. This is a simple (low speed) adapter that is + used in some 2.5" portable hard drives. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + protocol driver, otherwise you should answer M to build it as a + loadable module. The module will be called ktti. You must also + have a high-level driver for the type of device that you want to + support. + +config PARIDE_ON20 + tristate "OnSpec 90c20 protocol" + depends on PARIDE + help + This option enables support for the (obsolete) 90c20 parallel port + IDE protocol from OnSpec (often marketed under the ValuStore brand + name). If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will + be called on20. You must also have a high-level driver for the + type of device that you want to support. + +config PARIDE_ON26 + tristate "OnSpec 90c26 protocol" + depends on PARIDE + help + This option enables support for the 90c26 parallel port IDE protocol + from OnSpec Electronics (often marketed under the ValuStore brand + name). If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called on26. You must also have a high-level driver for the type + of device that you want to support. + +# |