Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

207 files changed, 28065 insertions, 0 deletions

diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
new file mode 100644
index 00000000..a685910d
--- /dev/null
+++ b/arch/frv/Kconfig
@@ -0,0 +1,375 @@
+config FRV
+	bool
+	default y
+	select HAVE_IDE
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_IRQ_WORK
+	select HAVE_PERF_EVENTS
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select GENERIC_CPU_DEVICES
+
+config ZONE_DMA
+	bool
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config GENERIC_HWEIGHT
+	bool
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default n
+
+config TIME_LOW_RES
+	bool
+	default y
+
+config QUICKLIST
+	bool
+	default y
+
+config ARCH_HAS_ILOG2_U32
+	bool
+	default y
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default y
+
+config HZ
+	int
+	default 1000
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+
+menu "Fujitsu FR-V system setup"
+
+config MMU
+	bool "MMU support"
+	help
+	  This options switches on and off support for the FR-V MMU
+	  (effectively switching between vmlinux and uClinux). Not all FR-V
+	  CPUs support this. Currently only the FR451 has a sufficiently
+	  featured MMU.
+
+config FRV_OUTOFLINE_ATOMIC_OPS
+	bool "Out-of-line the FRV atomic operations"
+	default n
+	help
+	  Setting this option causes the FR-V atomic operations to be mostly
+	  implemented out-of-line.
+
+	  See Documentation/frv/atomic-ops.txt for more information.
+
+config HIGHMEM
+	bool "High memory support"
+	depends on MMU
+	default y
+	help
+	  If you wish to use more than 256MB of memory with your MMU based
+	  system, you will need to select this option. The kernel can only see
+	  the memory between 0xC0000000 and 0xD0000000 directly... everything
+	  else must be kmapped.
+
+	  The arch is, however, capable of supporting up to 3GB of SDRAM.
+
+config HIGHPTE
+	bool "Allocate page tables in highmem"
+	depends on HIGHMEM
+	default y
+	help
+	  The VM uses one page of memory for each page table.  For systems
+	  with a lot of RAM, this can be wasteful of precious low memory.
+	  Setting this option will put user-space page tables in high memory.
+
+source "mm/Kconfig"
+
+choice
+	prompt "uClinux kernel load address"
+	depends on !MMU
+	default UCPAGE_OFFSET_C0000000
+	help
+	  This option sets the base address for the uClinux kernel. The kernel
+	  will rearrange the SDRAM layout to start at this address, and move
+	  itself to start there. It must be greater than 0, and it must be
+	  sufficiently less than 0xE0000000 that the SDRAM does not intersect
+	  the I/O region.
+
+	  The base address must also be aligned such that the SDRAM controller
+	  can decode it. For instance, a 512MB SDRAM bank must be 512MB aligned.
+
+config UCPAGE_OFFSET_20000000
+       bool "0x20000000"
+
+config UCPAGE_OFFSET_40000000
+       bool "0x40000000"
+
+config UCPAGE_OFFSET_60000000
+       bool "0x60000000"
+
+config UCPAGE_OFFSET_80000000
+       bool "0x80000000"
+
+config UCPAGE_OFFSET_A0000000
+       bool "0xA0000000"
+
+config UCPAGE_OFFSET_C0000000
+       bool "0xC0000000 (Recommended)"
+
+endchoice
+
+config PAGE_OFFSET
+	hex
+	default 0x20000000 if UCPAGE_OFFSET_20000000
+	default 0x40000000 if UCPAGE_OFFSET_40000000
+	default 0x60000000 if UCPAGE_OFFSET_60000000
+	default 0x80000000 if UCPAGE_OFFSET_80000000
+	default 0xA0000000 if UCPAGE_OFFSET_A0000000
+	default 0xC0000000
+
+config PROTECT_KERNEL
+	bool "Protect core kernel against userspace"
+	depends on !MMU
+	default y
+	help
+	  Selecting this option causes the uClinux kernel to change the
+	  permittivity of DAMPR register covering the core kernel image to
+	  prevent userspace accessing the underlying memory directly.
+
+choice
+	prompt "CPU Caching mode"
+	default FRV_DEFL_CACHE_WBACK
+	help
+	  This option determines the default caching mode for the kernel.
+
+	  Write-Back caching mode involves the all reads and writes causing
+	  the affected cacheline to be read into the cache first before being
+	  operated upon. Memory is not then updated by a write until the cache
+	  is filled and a cacheline needs to be displaced from the cache to
+	  make room. Only at that point is it written back.
+
+	  Write-Behind caching is similar to Write-Back caching, except that a
+	  write won't fetch a cacheline into the cache if there isn't already
+	  one there; it will write directly to memory instead.
+
+	  Write-Through caching only fetches cachelines from memory on a
+	  read. Writes always get written directly to memory. If the affected
+	  cacheline is also in cache, it will be updated too.
+
+	  The final option is to turn of caching entirely.
+
+	  Note that not all CPUs support Write-Behind caching. If the CPU on
+	  which the kernel is running doesn't, it'll fall back to Write-Back
+	  caching.
+
+config FRV_DEFL_CACHE_WBACK
+	bool "Write-Back"
+
+config FRV_DEFL_CACHE_WBEHIND
+	bool "Write-Behind"
+
+config FRV_DEFL_CACHE_WTHRU
+	bool "Write-Through"
+
+config FRV_DEFL_CACHE_DISABLED
+	bool "Disabled"
+
+endchoice
+
+menu "CPU core support"
+
+config CPU_FR401
+	bool "Include FR401 core support"
+	depends on !MMU
+	default y
+	help
+	  This enables support for the FR401, FR401A and FR403 CPUs
+
+config CPU_FR405
+	bool "Include FR405 core support"
+	depends on !MMU
+	default y
+	help
+	  This enables support for the FR405 CPU
+
+config CPU_FR451
+	bool "Include FR451 core support"
+	default y
+	help
+	  This enables support for the FR451 CPU
+
+config CPU_FR451_COMPILE
+	bool "Specifically compile for FR451 core"
+	depends on CPU_FR451 && !CPU_FR401 && !CPU_FR405 && !CPU_FR551
+	default y
+	help
+	  This causes appropriate flags to be passed to the compiler to
+	  optimise for the FR451 CPU
+
+config CPU_FR551
+	bool "Include FR551 core support"
+	depends on !MMU
+	default y
+	help
+	  This enables support for the FR555 CPU
+
+config CPU_FR551_COMPILE
+	bool "Specifically compile for FR551 core"
+	depends on CPU_FR551 && !CPU_FR401 && !CPU_FR405 && !CPU_FR451
+	default y
+	help
+	  This causes appropriate flags to be passed to the compiler to
+	  optimise for the FR555 CPU
+
+config FRV_L1_CACHE_SHIFT
+	int
+	default "5" if CPU_FR401 || CPU_FR405 || CPU_FR451
+	default "6" if CPU_FR551
+
+endmenu
+
+choice
+	prompt "System support"
+	default MB93091_VDK
+
+config MB93091_VDK
+	bool "MB93091 CPU board with or without motherboard"
+
+config MB93093_PDK
+	bool "MB93093 PDK unit"
+
+endchoice
+
+if MB93091_VDK
+choice
+	prompt "Motherboard support"
+	default MB93090_MB00
+
+config MB93090_MB00
+	bool "Use the MB93090-MB00 motherboard"
+	help
+	  Select this option if the MB93091 CPU board is going to be used with
+	  a MB93090-MB00 VDK motherboard
+
+config MB93091_NO_MB
+	bool "Use standalone"
+	help
+	  Select this option if the MB93091 CPU board is going to be used
+	  without a motherboard
+
+endchoice
+endif
+
+config FUJITSU_MB93493
+	bool "MB93493 Multimedia chip"
+	help
+	  Select this option if the MB93493 multimedia chip is going to be
+	  used.
+
+choice
+	prompt "GP-Relative data support"
+	default GPREL_DATA_8
+	help
+	  This option controls what data, if any, should be placed in the GP
+	  relative data sections. Using this means that the compiler can
+	  generate accesses to the data using GR16-relative addressing which
+	  is faster than absolute instructions and saves space (2 instructions
+	  per access).
+
+	  However, the GPREL region is limited in size because the immediate
+	  value used in the load and store instructions is limited to a 12-bit
+	  signed number.
+
+	  So if the linker starts complaining that accesses to GPREL data are
+	  out of range, try changing this option from the default.
+
+	  Note that modules will always be compiled with this feature disabled
+	  as the module data will not be in range of the GP base address.
+
+config GPREL_DATA_8
+	bool "Put data objects of up to 8 bytes into GP-REL"
+
+config GPREL_DATA_4
+	bool "Put data objects of up to 4 bytes into GP-REL"
+
+config GPREL_DATA_NONE
+	bool "Don't use GP-REL"
+
+endchoice
+
+config FRV_ONCPU_SERIAL
+	bool "Use on-CPU serial ports"
+	select SERIAL_8250
+	default y
+
+config PCI
+	bool "Use PCI"
+	depends on MB93090_MB00
+	default y
+	select GENERIC_PCI_IOMAP
+	help
+	  Some FR-V systems (such as the MB93090-MB00 VDK) have PCI
+	  onboard. If you have one of these boards and you wish to use the PCI
+	  facilities, say Y here.
+
+config RESERVE_DMA_COHERENT
+	bool "Reserve DMA coherent memory"
+	depends on PCI && !MMU
+	default y
+	help
+	  Many PCI drivers require access to uncached memory for DMA device
+	  communications (such as is done with some Ethernet buffer rings). If
+	  a fully featured MMU is available, this can be done through page
+	  table settings, but if not, a region has to be set aside and marked
+	  with a special DAMPR register.
+
+	  Setting this option causes uClinux to set aside a portion of the
+	  available memory for use in this manner. The memory will then be
+	  unavailable for normal kernel use.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+menu "Power management options"
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/frv/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/frv/Kconfig.debug b/arch/frv/Kconfig.debug
new file mode 100644
index 00000000..211f01bc
--- /dev/null
+++ b/arch/frv/Kconfig.debug
@@ -0,0 +1,52 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL
+
+config GDBSTUB
+	bool "Remote GDB kernel debugging"
+	depends on DEBUG_KERNEL
+	select DEBUG_INFO
+	select FRAME_POINTER
+	help
+	  If you say Y here, it will be possible to remotely debug the kernel
+	  using gdb. This enlarges your kernel ELF image disk size by several
+	  megabytes and requires a machine with more than 16 MB, better 32 MB
+	  RAM to avoid excessive linking time. This is only useful for kernel
+	  hackers. If unsure, say N.
+
+choice
+	prompt "GDB stub port"
+	default GDBSTUB_UART1
+	depends on GDBSTUB
+	help
+	  Select the on-CPU port used for GDB-stub
+
+config GDBSTUB_UART0
+	bool "/dev/ttyS0"
+
+config GDBSTUB_UART1
+	bool "/dev/ttyS1"
+
+endchoice
+
+config GDBSTUB_IMMEDIATE
+	bool "Break into GDB stub immediately"
+	depends on GDBSTUB
+	help
+	  If you say Y here, GDB stub will break into the program as soon as
+	  possible, leaving the program counter at the beginning of
+	  start_kernel() in init/main.c.
+
+config GDB_CONSOLE
+	bool "Console output to GDB"
+	depends on GDBSTUB
+	help
+	  If you are using GDB for remote debugging over a serial port and
+	  would like kernel messages to be formatted into GDB $O packets so
+	  that GDB prints them as program output, say 'Y'.
+
+endmenu
diff --git a/arch/frv/Makefile b/arch/frv/Makefile
new file mode 100644
index 00000000..7ff84575
--- /dev/null
+++ b/arch/frv/Makefile
@@ -0,0 +1,97 @@
+#
+# frv/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (c) 2003, 2004 Red Hat Inc.
+# - Written by David Howells <dhowells@redhat.com>
+# - Derived from arch/m68knommu/Makefile,
+#	Copyright (c) 1999,2001  D. Jeff Dionne <jeff@lineo.ca>,
+#	Rt-Control Inc. / Lineo, Inc.
+#
+# Copyright (C) 1998,1999  D. Jeff Dionne <jeff@uclinux.org>,
+#                          Kenneth Albanowski <kjahds@kjahds.com>,
+#
+# Based on arch/m68k/Makefile:
+# Copyright (C) 1994 by Hamish Macdonald
+#
+
+ifdef CONFIG_MMU
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
+UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
+
+KBUILD_AFLAGS_MODULE += -G0 -mlong-calls
+KBUILD_CFLAGS_MODULE += -G0 -mlong-calls
+
+ifdef CONFIG_GPREL_DATA_8
+KBUILD_CFLAGS	+= -G8
+else
+ifdef CONFIG_GPREL_DATA_4
+KBUILD_CFLAGS	+= -G4
+else
+ifdef CONFIG_GPREL_DATA_NONE
+KBUILD_CFLAGS	+= -G0
+endif
+endif
+endif
+
+#LDFLAGS_vmlinux	:= -Map linkmap.txt
+
+ifdef CONFIG_GC_SECTIONS
+KBUILD_CFLAGS	+= -ffunction-sections -fdata-sections
+endif
+
+ifndef CONFIG_FRAME_POINTER
+KBUILD_CFLAGS	+= -mno-linked-fp
+endif
+
+ifdef CONFIG_CPU_FR451_COMPILE
+KBUILD_CFLAGS	+= -mcpu=fr450
+KBUILD_AFLAGS	+= -mcpu=fr450
+else
+ifdef CONFIG_CPU_FR551_COMPILE
+KBUILD_CFLAGS	+= -mcpu=fr550
+KBUILD_AFLAGS	+= -mcpu=fr550
+else
+KBUILD_CFLAGS	+= -mcpu=fr400
+KBUILD_AFLAGS	+= -mcpu=fr400
+endif
+endif
+
+# pretend the kernel is going to run on an FR400 with no media-fp unit
+# - reserve CC3 for use with atomic ops
+# - all the extra registers are dealt with only at context switch time
+KBUILD_CFLAGS	+= -mno-fdpic -mgpr-32 -msoft-float -mno-media
+KBUILD_CFLAGS	+= -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2
+KBUILD_AFLAGS	+= -mno-fdpic
+
+# make sure the .S files get compiled with debug info
+# and disable optimisations that are unhelpful whilst debugging
+ifdef CONFIG_DEBUG_INFO
+#KBUILD_CFLAGS	+= -O1
+KBUILD_AFLAGS	+= -Wa,--gdwarf2
+endif
+
+head-y		:= arch/frv/kernel/head.o arch/frv/kernel/init_task.o
+
+core-y		+= arch/frv/kernel/ arch/frv/mm/
+libs-y		+= arch/frv/lib/
+
+core-$(CONFIG_MB93090_MB00)	+= arch/frv/mb93090-mb00/
+
+all: Image
+
+Image: vmlinux
+	$(Q)$(MAKE) $(build)=arch/frv/boot $@
+
+archclean:
+	$(Q)$(MAKE) $(clean)=arch/frv/boot
diff --git a/arch/frv/boot/Makefile b/arch/frv/boot/Makefile
new file mode 100644
index 00000000..6ae3254d
--- /dev/null
+++ b/arch/frv/boot/Makefile
@@ -0,0 +1,74 @@
+#
+# arch/arm/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2000 Russell King
+#
+
+targets := Image zImage bootpImage
+
+SYSTEM	=$(LINUX)
+
+ZTEXTADDR	 = 0x02080000
+PARAMS_PHYS	 = 0x0207c000
+INITRD_PHYS	 = 0x02180000
+INITRD_VIRT	 = 0x02180000
+
+#
+# If you don't define ZRELADDR above,
+# then it defaults to ZTEXTADDR
+#
+ifeq ($(ZRELADDR),)
+ZRELADDR	= $(ZTEXTADDR)
+endif
+
+export	SYSTEM ZTEXTADDR ZBSSADDR ZRELADDR INITRD_PHYS INITRD_VIRT PARAMS_PHYS
+
+Image: $(obj)/Image
+
+targets: $(obj)/Image
+
+$(obj)/Image: vmlinux FORCE
+	$(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+
+#$(obj)/Image:	$(CONFIGURE) $(SYSTEM)
+#	$(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+
+bzImage: zImage
+
+zImage:	$(CONFIGURE) compressed/$(LINUX)
+	$(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+
+bootpImage: bootp/bootp
+	$(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+
+compressed/$(LINUX): $(LINUX) dep
+	@$(MAKE) -C compressed $(LINUX)
+
+bootp/bootp: zImage initrd
+	@$(MAKE) -C bootp bootp
+
+initrd:
+	@test "$(INITRD_VIRT)" != "" || (echo This architecture does not support INITRD; exit -1)
+	@test "$(INITRD)" != "" || (echo You must specify INITRD; exit -1)
+
+#
+# installation
+#
+install: $(CONFIGURE) Image
+	sh ./install.sh $(KERNELRELEASE) Image System.map "$(INSTALL_PATH)"
+
+zinstall: $(CONFIGURE) zImage
+	sh ./install.sh $(KERNELRELEASE) zImage System.map "$(INSTALL_PATH)"
+
+#
+# miscellany
+#
+mrproper clean:
+#	@$(MAKE) -C compressed clean
+#	@$(MAKE) -C bootp clean
+
+dep:
diff --git a/arch/frv/defconfig b/arch/frv/defconfig
new file mode 100644
index 00000000..b1b79261
--- /dev/null
+++ b/arch/frv/defconfig
@@ -0,0 +1,39 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_HOTPLUG is not set
+CONFIG_MMU=y
+CONFIG_FRV_OUTOFLINE_ATOMIC_OPS=y
+CONFIG_FRV_DEFL_CACHE_WTHRU=y
+CONFIG_GPREL_DATA_4=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
new file mode 100644
index 00000000..5be6663c
--- /dev/null
+++ b/arch/frv/include/asm/Kbuild
@@ -0,0 +1,4 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += registers.h
+header-y += termios.h
diff --git a/arch/frv/include/asm/asm-offsets.h b/arch/frv/include/asm/asm-offsets.h
new file mode 100644
index 00000000..d370ee36
--- /dev/null
+++ b/arch/frv/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
new file mode 100644
index 00000000..b86329d0
--- /dev/null
+++ b/arch/frv/include/asm/atomic.h
@@ -0,0 +1,205 @@
+/* atomic.h: atomic operation emulation for FR-V
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/types.h>
+#include <asm/spr-regs.h>
+#include <asm/cmpxchg.h>
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * We do not have SMP systems, so we don't have to deal with that.
+ */
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#define ATOMIC_INIT(i)		{ (i) }
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = (i))
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long val;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	add%I2		%1,%2,%1		\n"
+	    "	cst.p		%1,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    : "+U"(v->counter), "=&r"(val)
+	    : "NPr"(i)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long val;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	sub%I2		%1,%2,%1		\n"
+	    "	cst.p		%1,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    : "+U"(v->counter), "=&r"(val)
+	    : "NPr"(i)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	return val;
+}
+
+#else
+
+extern int atomic_add_return(int i, atomic_t *v);
+extern int atomic_sub_return(int i, atomic_t *v);
+
+#endif
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+	atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+	atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+	volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+	long long counter;
+
+	asm("ldd%I1 %M1,%0"
+	    : "=e"(counter)
+	    : "m"(v->counter));
+	return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	asm volatile("std%I0 %1,%M0"
+		     : "=m"(v->counter)
+		     : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+	atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+	atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+	atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+	atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
+
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new)	(__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new)		(__xchg_64(new, &(v)->counter))
+
+static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c;
+}
+
+
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/frv/include/asm/auxvec.h b/arch/frv/include/asm/auxvec.h
new file mode 100644
index 00000000..07710778
--- /dev/null
+++ b/arch/frv/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __FRV_AUXVEC_H
+#define __FRV_AUXVEC_H
+
+#endif
diff --git a/arch/frv/include/asm/ax88796.h b/arch/frv/include/asm/ax88796.h
new file mode 100644
index 00000000..637e9803
--- /dev/null
+++ b/arch/frv/include/asm/ax88796.h
@@ -0,0 +1,22 @@
+/* ax88796.h: access points to the driver for the AX88796 NE2000 clone
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_AX88796_H
+#define _ASM_AX88796_H
+
+#include <asm/mb-regs.h>
+
+#define AX88796_IOADDR		(__region_CS1 + 0x200)
+#define AX88796_IRQ		IRQ_CPU_EXTERNAL7
+#define AX88796_FULL_DUPLEX	0			/* force full duplex */
+#define AX88796_BUS_INFO	"CS1#+0x200"		/* bus info for ethtool */
+
+#endif /* _ASM_AX88796_H */
diff --git a/arch/frv/include/asm/barrier.h b/arch/frv/include/asm/barrier.h
new file mode 100644
index 00000000..06776ad9
--- /dev/null
+++ b/arch/frv/include/asm/barrier.h
@@ -0,0 +1,29 @@
+/* FR-V CPU memory barrier definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BARRIER_H
+#define _ASM_BARRIER_H
+
+#define nop()			asm volatile ("nop"::)
+
+#define mb()			asm volatile ("membar" : : :"memory")
+#define rmb()			asm volatile ("membar" : : :"memory")
+#define wmb()			asm volatile ("membar" : : :"memory")
+#define read_barrier_depends()	do { } while (0)
+
+#define smp_mb()			barrier()
+#define smp_rmb()			barrier()
+#define smp_wmb()			barrier()
+#define smp_read_barrier_depends()	do {} while(0)
+#define set_mb(var, value) \
+	do { var = (value); barrier(); } while (0)
+
+#endif /* _ASM_BARRIER_H */
diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h
new file mode 100644
index 00000000..57bf85db
--- /dev/null
+++ b/arch/frv/include/asm/bitops.h
@@ -0,0 +1,410 @@
+/* bitops.h: bit operations for the Fujitsu FR-V CPUs
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline
+unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v)
+{
+	unsigned long old, tmp;
+
+	asm volatile(
+		"0:						\n"
+		"	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+		"	ckeq		icc3,cc7		\n"
+		"	ld.p		%M0,%1			\n"	/* LD.P/ORCR are atomic */
+		"	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+		"	and%I3		%1,%3,%2		\n"
+		"	cst.p		%2,%M0		,cc3,#1	\n"	/* if store happens... */
+		"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* ... clear ICC3.Z */
+		"	beq		icc3,#0,0b		\n"
+		: "+U"(*v), "=&r"(old), "=r"(tmp)
+		: "NPr"(~mask)
+		: "memory", "cc7", "cc3", "icc3"
+		);
+
+	return old;
+}
+
+static inline
+unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v)
+{
+	unsigned long old, tmp;
+
+	asm volatile(
+		"0:						\n"
+		"	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+		"	ckeq		icc3,cc7		\n"
+		"	ld.p		%M0,%1			\n"	/* LD.P/ORCR are atomic */
+		"	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+		"	or%I3		%1,%3,%2		\n"
+		"	cst.p		%2,%M0		,cc3,#1	\n"	/* if store happens... */
+		"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* ... clear ICC3.Z */
+		"	beq		icc3,#0,0b		\n"
+		: "+U"(*v), "=&r"(old), "=r"(tmp)
+		: "NPr"(mask)
+		: "memory", "cc7", "cc3", "icc3"
+		);
+
+	return old;
+}
+
+static inline
+unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v)
+{
+	unsigned long old, tmp;
+
+	asm volatile(
+		"0:						\n"
+		"	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+		"	ckeq		icc3,cc7		\n"
+		"	ld.p		%M0,%1			\n"	/* LD.P/ORCR are atomic */
+		"	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+		"	xor%I3		%1,%3,%2		\n"
+		"	cst.p		%2,%M0		,cc3,#1	\n"	/* if store happens... */
+		"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* ... clear ICC3.Z */
+		"	beq		icc3,#0,0b		\n"
+		: "+U"(*v), "=&r"(old), "=r"(tmp)
+		: "NPr"(mask)
+		: "memory", "cc7", "cc3", "icc3"
+		);
+
+	return old;
+}
+
+#else
+
+extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v);
+
+#endif
+
+#define atomic_clear_mask(mask, v)	atomic_test_and_ANDNOT_mask((mask), (v))
+#define atomic_set_mask(mask, v)	atomic_test_and_OR_mask((mask), (v))
+
+static inline int test_and_clear_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *ptr = addr;
+	unsigned long mask = 1UL << (nr & 31);
+	ptr += nr >> 5;
+	return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_set_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *ptr = addr;
+	unsigned long mask = 1UL << (nr & 31);
+	ptr += nr >> 5;
+	return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *ptr = addr;
+	unsigned long mask = 1UL << (nr & 31);
+	ptr += nr >> 5;
+	return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile void *addr)
+{
+	test_and_clear_bit(nr, addr);
+}
+
+static inline void set_bit(unsigned long nr, volatile void *addr)
+{
+	test_and_set_bit(nr, addr);
+}
+
+static inline void change_bit(unsigned long nr, volatile void *addr)
+{
+	test_and_change_bit(nr, addr);
+}
+
+static inline void __clear_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	*a &= ~mask;
+}
+
+static inline void __set_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	*a |= mask;
+}
+
+static inline void __change_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	*a ^= mask;
+}
+
+static inline int __test_and_clear_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask, retval;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	return retval;
+}
+
+static inline int __test_and_set_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask, retval;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	return retval;
+}
+
+static inline int __test_and_change_bit(unsigned long nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask, retval;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int
+__constant_test_bit(unsigned long nr, const volatile void *addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static inline int __test_bit(unsigned long nr, const volatile void *addr)
+{
+	int 	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+#define fls(x)						\
+({							\
+	int bit;					\
+							\
+	asm("	subcc	%1,gr0,gr0,icc0		\n"	\
+	    "	ckne	icc0,cc4		\n"	\
+	    "	cscan.p	%1,gr0,%0	,cc4,#1	\n"	\
+	    "	csub	%0,%0,%0	,cc4,#0	\n"	\
+	    "   csub    %2,%0,%0	,cc4,#1	\n"	\
+	    : "=&r"(bit)				\
+	    : "r"(x), "r"(32)				\
+	    : "icc0", "cc4"				\
+	    );						\
+							\
+	bit;						\
+})
+
+/**
+ * fls64 - find last bit set in a 64-bit value
+ * @n: the value to search
+ *
+ * This is defined the same way as ffs:
+ * - return 64..1 to indicate bit 63..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls64(u64 n)
+{
+	union {
+		u64 ll;
+		struct { u32 h, l; };
+	} _;
+	int bit, x, y;
+
+	_.ll = n;
+
+	asm("	subcc.p		%3,gr0,gr0,icc0		\n"
+	    "	subcc		%4,gr0,gr0,icc1		\n"
+	    "	ckne		icc0,cc4		\n"
+	    "	ckne		icc1,cc5		\n"
+	    "	norcr		cc4,cc5,cc6		\n"
+	    "	csub.p		%0,%0,%0	,cc6,1	\n"
+	    "	orcr		cc5,cc4,cc4		\n"
+	    "	andcr		cc4,cc5,cc4		\n"
+	    "	cscan.p		%3,gr0,%0	,cc4,0	\n"
+	    "   setlos		#64,%1			\n"
+	    "	cscan.p		%4,gr0,%0	,cc4,1	\n"
+	    "   setlos		#32,%2			\n"
+	    "	csub.p		%1,%0,%0	,cc4,0	\n"
+	    "	csub		%2,%0,%0	,cc4,1	\n"
+	    : "=&r"(bit), "=r"(x), "=r"(y)
+	    : "0r"(_.h), "r"(_.l)
+	    : "icc0", "icc1", "cc4", "cc5", "cc6"
+	    );
+	return bit;
+
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+	/* Note: (x & -x) gives us a mask that is the least significant
+	 * (rightmost) 1-bit of the value in x.
+	 */
+	return fls(x & -x);
+}
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+int __ffs(unsigned long x)
+{
+	int bit;
+	asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x));
+	return 31 - bit;
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+	unsigned long bit;
+	asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word));
+	return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U32
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	int bit;
+	asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n));
+	return 31 - bit;
+}
+
+/*
+ * special slimline version of fls64() for calculating ilog2_u64()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U64
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+	union {
+		u64 ll;
+		struct { u32 h, l; };
+	} _;
+	int bit, x, y;
+
+	_.ll = n;
+
+	asm("	subcc		%3,gr0,gr0,icc0		\n"
+	    "	ckeq		icc0,cc4		\n"
+	    "	cscan.p		%3,gr0,%0	,cc4,0	\n"
+	    "   setlos		#63,%1			\n"
+	    "	cscan.p		%4,gr0,%0	,cc4,1	\n"
+	    "   setlos		#31,%2			\n"
+	    "	csub.p		%1,%0,%0	,cc4,0	\n"
+	    "	csub		%2,%0,%0	,cc4,1	\n"
+	    : "=&r"(bit), "=r"(x), "=r"(y)
+	    : "0r"(_.h), "r"(_.l)
+	    : "icc0", "cc4"
+	    );
+	return bit;
+}
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/le.h>
+
+#include <asm-generic/bitops/ext2-atomic-setbit.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/arch/frv/include/asm/bitsperlong.h b/arch/frv/include/asm/bitsperlong.h
new file mode 100644
index 00000000..6dc0bb0c
--- /dev/null
+++ b/arch/frv/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h
new file mode 100644
index 00000000..dd01bcf4
--- /dev/null
+++ b/arch/frv/include/asm/bug.h
@@ -0,0 +1,56 @@
+/* bug.h: FRV bug trapping
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+#include <linux/linkage.h>
+
+#ifdef CONFIG_BUG
+/*
+ * Tell the user there is some problem.
+ */
+extern asmlinkage void __debug_bug_trap(int signr);
+
+#ifdef CONFIG_NO_KERNEL_MSG
+#define	_debug_bug_printk()
+#else
+extern void __debug_bug_printk(const char *file, unsigned line);
+#define	_debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__)
+#endif
+
+#define _debug_bug_trap(signr)			\
+do {						\
+	__debug_bug_trap(signr);		\
+	asm volatile("nop");			\
+} while(1)
+
+#define HAVE_ARCH_BUG
+#define BUG()					\
+do {						\
+	_debug_bug_printk();			\
+	_debug_bug_trap(6 /*SIGABRT*/);		\
+} while (0)
+
+#ifdef CONFIG_GDBSTUB
+#define HAVE_ARCH_KGDB_RAISE
+#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0)
+
+#define HAVE_ARCH_KGDB_BAD_PAGE
+#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
+#endif
+
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2)));
+
+#endif
diff --git a/arch/frv/include/asm/bugs.h b/arch/frv/include/asm/bugs.h
new file mode 100644
index 00000000..f2382be2
--- /dev/null
+++ b/arch/frv/include/asm/bugs.h
@@ -0,0 +1,14 @@
+/* bugs.h: arch bug checking entry
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void check_bugs(void)
+{
+}
diff --git a/arch/frv/include/asm/busctl-regs.h b/arch/frv/include/asm/busctl-regs.h
new file mode 100644
index 00000000..bb0ff481
--- /dev/null
+++ b/arch/frv/include/asm/busctl-regs.h
@@ -0,0 +1,41 @@
+/* busctl-regs.h: FR400-series CPU bus controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+/* bus controller registers */
+#define __get_LGCR()	({ *(volatile unsigned long *)(0xfe000010); })
+#define __get_LMAICR()	({ *(volatile unsigned long *)(0xfe000030); })
+#define __get_LEMBR()	({ *(volatile unsigned long *)(0xfe000040); })
+#define __get_LEMAM()	({ *(volatile unsigned long *)(0xfe000048); })
+#define __get_LCR(R)	({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); })
+#define __get_LSBR(R)	({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); })
+#define __get_LSAM(R)	({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); })
+
+#define __set_LGCR(V)	do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0)
+#define __set_LMAICR(V)	do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0)
+#define __set_LEMBR(V)	do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0)
+#define __set_LEMAM(V)	do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0)
+#define __set_LCR(R,V)	do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0)
+#define __set_LSBR(R,V)	do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0)
+#define __set_LSAM(R,V)	do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0)
+
+/* FR401 SDRAM controller registers */
+#define __get_DBR(R)	({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); })
+#define __get_DAM(R)	({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); })
+
+/* FR551 SDRAM controller registers */
+#define __get_DARS(R)	({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); })
+#define __get_DAMK(R)	({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); })
+
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/arch/frv/include/asm/byteorder.h b/arch/frv/include/asm/byteorder.h
new file mode 100644
index 00000000..f29b7593
--- /dev/null
+++ b/arch/frv/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h
new file mode 100644
index 00000000..2797163b
--- /dev/null
+++ b/arch/frv/include/asm/cache.h
@@ -0,0 +1,23 @@
+/* cache.h: FRV cache definitions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT		(CONFIG_FRV_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned	__attribute__((aligned(L1_CACHE_BYTES)))
+#define ____cacheline_aligned	__attribute__((aligned(L1_CACHE_BYTES)))
+
+#endif
diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h
new file mode 100644
index 00000000..edbac54a
--- /dev/null
+++ b/arch/frv/include/asm/cacheflush.h
@@ -0,0 +1,105 @@
+/* cacheflush.h: FRV cache flushing routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache management (our cache is physically indexed)
+ */
+#define flush_cache_all()			do {} while(0)
+#define flush_cache_mm(mm)			do {} while(0)
+#define flush_cache_dup_mm(mm)			do {} while(0)
+#define flush_cache_range(mm, start, end)	do {} while(0)
+#define flush_cache_page(vma, vmaddr, pfn)	do {} while(0)
+#define flush_cache_vmap(start, end)		do {} while(0)
+#define flush_cache_vunmap(start, end)		do {} while(0)
+#define flush_dcache_mmap_lock(mapping)		do {} while(0)
+#define flush_dcache_mmap_unlock(mapping)	do {} while(0)
+
+/*
+ * physically-indexed cache management
+ * - see arch/frv/lib/cache.S
+ */
+extern void frv_dcache_writeback(unsigned long start, unsigned long size);
+extern void frv_cache_invalidate(unsigned long start, unsigned long size);
+extern void frv_icache_invalidate(unsigned long start, unsigned long size);
+extern void frv_cache_wback_inv(unsigned long start, unsigned long size);
+
+static inline void __flush_cache_all(void)
+{
+	asm volatile("	dcef	@(gr0,gr0),#1	\n"
+		     "	icei	@(gr0,gr0),#1	\n"
+		     "	membar			\n"
+		     : : : "memory"
+		     );
+}
+
+/* dcache/icache coherency... */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+#ifdef CONFIG_MMU
+extern void flush_dcache_page(struct page *page);
+#else
+static inline void flush_dcache_page(struct page *page)
+{
+	unsigned long addr = page_to_phys(page);
+	frv_dcache_writeback(addr, addr + PAGE_SIZE);
+}
+#endif
+
+static inline void flush_page_to_ram(struct page *page)
+{
+	flush_dcache_page(page);
+}
+
+static inline void flush_icache(void)
+{
+	__flush_cache_all();
+}
+
+static inline void flush_icache_range(unsigned long start, unsigned long end)
+{
+	frv_cache_wback_inv(start, end);
+}
+
+#ifdef CONFIG_MMU
+extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+				    unsigned long start, unsigned long len);
+#else
+static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+					   unsigned long start, unsigned long len)
+{
+	frv_cache_wback_inv(start, start + len);
+}
+#endif
+
+static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+	flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE);
+}
+
+/*
+ * permit ptrace to access another process's address space through the icache
+ * and the dcache
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+do {								\
+	memcpy((dst), (src), (len));				\
+	flush_icache_user_range((vma), (page), (vaddr), (len));	\
+} while(0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	memcpy((dst), (src), (len))
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/frv/include/asm/checksum.h b/arch/frv/include/asm/checksum.h
new file mode 100644
index 00000000..269da09f
--- /dev/null
+++ b/arch/frv/include/asm/checksum.h
@@ -0,0 +1,180 @@
+/* checksum.h: FRV checksumming
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+						int len, __wsum sum, int *csum_err);
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+static inline
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int tmp, inc, sum = 0;
+
+	asm("	addcc		gr0,gr0,gr0,icc0\n" /* clear icc0.C */
+	    "	subi		%1,#4,%1	\n"
+	    "0:					\n"
+	    "	ldu.p		@(%1,%3),%4	\n"
+	    "	subicc		%2,#1,%2,icc1	\n"
+	    "	addxcc.p	%4,%0,%0,icc0	\n"
+	    "	bhi		icc1,#2,0b	\n"
+
+	    /* fold the 33-bit result into 16-bits */
+	    "	addxcc		gr0,%0,%0,icc0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	sethi		#0,%0		\n"
+	    "	add		%1,%0,%0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	add		%1,%0,%0	\n"
+
+	    : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
+	    : "0" (sum), "1" (iph), "2" (ihl), "3" (4),
+	    "m"(*(volatile struct { int _[100]; } *)iph)
+	    : "icc0", "icc1", "memory"
+	    );
+
+	return (__force __sum16)~sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	asm("	srli		%0,#16,%1	\n"
+	    "	sethi		#0,%0		\n"
+	    "	add		%1,%0,%0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	add		%1,%0,%0	\n"
+	    : "=r"(sum), "=&r"(tmp)
+	    : "0"(sum)
+	    );
+
+	return (__force __sum16)~sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	asm("	addcc		%1,%0,%0,icc0	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+	    "	addxcc		%3,%0,%0,icc0	\n"
+	    "	addxcc		gr0,%0,%0,icc0	\n"
+	    : "=r" (sum)
+	    : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum)
+	    : "icc0"
+	    );
+	return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum)
+{
+	unsigned long tmp, tmp2;
+
+	asm("	addcc		%2,%0,%0,icc0	\n"
+
+	    /* add up the source addr */
+	    "	ldi		@(%3,0),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%3,4),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+	    "	ldi		@(%3,8),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%3,12),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+
+	    /* add up the dest addr */
+	    "	ldi		@(%4,0),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%4,4),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+	    "	ldi		@(%4,8),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%4,12),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+
+	    /* fold the 33-bit result into 16-bits */
+	    "	addxcc		gr0,%0,%0,icc0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	sethi		#0,%0		\n"
+	    "	add		%1,%0,%0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	add		%1,%0,%0	\n"
+
+	    : "=r" (sum), "=&r" (tmp), "=r" (tmp2)
+	    : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto)
+	    : "icc0"
+	    );
+
+	return (__force __sum16)~sum;
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/frv/include/asm/cmpxchg.h b/arch/frv/include/asm/cmpxchg.h
new file mode 100644
index 00000000..5b04dd0a
--- /dev/null
+++ b/arch/frv/include/asm/cmpxchg.h
@@ -0,0 +1,172 @@
+/* xchg and cmpxchg operation emulation for FR-V
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_CMPXCHG_H
+#define _ASM_CMPXCHG_H
+
+#include <linux/types.h>
+
+/*****************************************************************************/
+/*
+ * exchange value with memory
+ */
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define xchg(ptr, x)								\
+({										\
+	__typeof__(ptr) __xg_ptr = (ptr);					\
+	__typeof__(*(ptr)) __xg_orig;						\
+										\
+	switch (sizeof(__xg_orig)) {						\
+	case 4:									\
+		asm volatile(							\
+			"swap%I0 %M0,%1"					\
+			: "+m"(*__xg_ptr), "=r"(__xg_orig)			\
+			: "1"(x)						\
+			: "memory"						\
+			);							\
+		break;								\
+										\
+	default:								\
+		__xg_orig = (__typeof__(__xg_orig))0;				\
+		asm volatile("break");						\
+		break;								\
+	}									\
+										\
+	__xg_orig;								\
+})
+
+#else
+
+extern uint32_t __xchg_32(uint32_t i, volatile void *v);
+
+#define xchg(ptr, x)										\
+({												\
+	__typeof__(ptr) __xg_ptr = (ptr);							\
+	__typeof__(*(ptr)) __xg_orig;								\
+												\
+	switch (sizeof(__xg_orig)) {								\
+	case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr);	break;	\
+	default:										\
+		__xg_orig = (__typeof__(__xg_orig))0;									\
+		asm volatile("break");								\
+		break;										\
+	}											\
+	__xg_orig;										\
+})
+
+#endif
+
+#define tas(ptr) (xchg((ptr), 1))
+
+/*****************************************************************************/
+/*
+ * compare and conditionally exchange value with memory
+ * - if (*ptr == test) then orig = *ptr; *ptr = test;
+ * - if (*ptr != test) then orig = *ptr;
+ */
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define cmpxchg(ptr, test, new)							\
+({										\
+	__typeof__(ptr) __xg_ptr = (ptr);					\
+	__typeof__(*(ptr)) __xg_orig, __xg_tmp;					\
+	__typeof__(*(ptr)) __xg_test = (test);					\
+	__typeof__(*(ptr)) __xg_new = (new);					\
+										\
+	switch (sizeof(__xg_orig)) {						\
+	case 4:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	ld.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	sub%I4cc	%1,%4,%2,icc0		\n"	\
+			"	bne		icc0,#0,1f		\n"	\
+			"	cst.p		%3,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			"1:						\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp)	\
+			: "r"(__xg_new), "NPr"(__xg_test)			\
+			: "memory", "cc7", "cc3", "icc3", "icc0"		\
+			);							\
+		break;								\
+										\
+	default:								\
+		__xg_orig = (__typeof__(__xg_orig))0;				\
+		asm volatile("break");						\
+		break;								\
+	}									\
+										\
+	__xg_orig;								\
+})
+
+#else
+
+extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new);
+
+#define cmpxchg(ptr, test, new)							\
+({										\
+	__typeof__(ptr) __xg_ptr = (ptr);					\
+	__typeof__(*(ptr)) __xg_orig;						\
+	__typeof__(*(ptr)) __xg_test = (test);					\
+	__typeof__(*(ptr)) __xg_new = (new);					\
+										\
+	switch (sizeof(__xg_orig)) {						\
+	case 4: __xg_orig = (__force __typeof__(*ptr))				\
+			__cmpxchg_32((__force uint32_t *)__xg_ptr,		\
+					 (__force uint32_t)__xg_test,		\
+					 (__force uint32_t)__xg_new); break;	\
+	default:								\
+		__xg_orig = (__typeof__(__xg_orig))0;				\
+		asm volatile("break");						\
+		break;								\
+	}									\
+										\
+	__xg_orig;								\
+})
+
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return cmpxchg((unsigned long *)ptr, old, new);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* _ASM_CMPXCHG_H */
diff --git a/arch/frv/include/asm/cpu-irqs.h b/arch/frv/include/asm/cpu-irqs.h
new file mode 100644
index 00000000..478f3498
--- /dev/null
+++ b/arch/frv/include/asm/cpu-irqs.h
@@ -0,0 +1,81 @@
+/* cpu-irqs.h: on-CPU peripheral irqs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CPU_IRQS_H
+#define _ASM_CPU_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+/* IRQ to level mappings */
+#define IRQ_GDBSTUB_LEVEL	15
+#define IRQ_UART_LEVEL		13
+
+#ifdef CONFIG_GDBSTUB_UART0
+#define IRQ_UART0_LEVEL		IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART0_LEVEL		IRQ_UART_LEVEL
+#endif
+
+#ifdef CONFIG_GDBSTUB_UART1
+#define IRQ_UART1_LEVEL		IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART1_LEVEL		IRQ_UART_LEVEL
+#endif
+
+#define IRQ_DMA0_LEVEL		14
+#define IRQ_DMA1_LEVEL		14
+#define IRQ_DMA2_LEVEL		14
+#define IRQ_DMA3_LEVEL		14
+#define IRQ_DMA4_LEVEL		14
+#define IRQ_DMA5_LEVEL		14
+#define IRQ_DMA6_LEVEL		14
+#define IRQ_DMA7_LEVEL		14
+
+#define IRQ_TIMER0_LEVEL	12
+#define IRQ_TIMER1_LEVEL	11
+#define IRQ_TIMER2_LEVEL	10
+
+#define IRQ_XIRQ0_LEVEL		1
+#define IRQ_XIRQ1_LEVEL		2
+#define IRQ_XIRQ2_LEVEL		3
+#define IRQ_XIRQ3_LEVEL		4
+#define IRQ_XIRQ4_LEVEL		5
+#define IRQ_XIRQ5_LEVEL		6
+#define IRQ_XIRQ6_LEVEL		7
+#define IRQ_XIRQ7_LEVEL		8
+
+/* IRQ IDs presented to drivers */
+#define IRQ_CPU__UNUSED		IRQ_BASE_CPU
+#define IRQ_CPU_UART0		(IRQ_BASE_CPU + IRQ_UART0_LEVEL)
+#define IRQ_CPU_UART1		(IRQ_BASE_CPU + IRQ_UART1_LEVEL)
+#define IRQ_CPU_TIMER0		(IRQ_BASE_CPU + IRQ_TIMER0_LEVEL)
+#define IRQ_CPU_TIMER1		(IRQ_BASE_CPU + IRQ_TIMER1_LEVEL)
+#define IRQ_CPU_TIMER2		(IRQ_BASE_CPU + IRQ_TIMER2_LEVEL)
+#define IRQ_CPU_DMA0		(IRQ_BASE_CPU + IRQ_DMA0_LEVEL)
+#define IRQ_CPU_DMA1		(IRQ_BASE_CPU + IRQ_DMA1_LEVEL)
+#define IRQ_CPU_DMA2		(IRQ_BASE_CPU + IRQ_DMA2_LEVEL)
+#define IRQ_CPU_DMA3		(IRQ_BASE_CPU + IRQ_DMA3_LEVEL)
+#define IRQ_CPU_DMA4		(IRQ_BASE_CPU + IRQ_DMA4_LEVEL)
+#define IRQ_CPU_DMA5		(IRQ_BASE_CPU + IRQ_DMA5_LEVEL)
+#define IRQ_CPU_DMA6		(IRQ_BASE_CPU + IRQ_DMA6_LEVEL)
+#define IRQ_CPU_DMA7		(IRQ_BASE_CPU + IRQ_DMA7_LEVEL)
+#define IRQ_CPU_EXTERNAL0	(IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL)
+#define IRQ_CPU_EXTERNAL1	(IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL)
+#define IRQ_CPU_EXTERNAL2	(IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL)
+#define IRQ_CPU_EXTERNAL3	(IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL)
+#define IRQ_CPU_EXTERNAL4	(IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL)
+#define IRQ_CPU_EXTERNAL5	(IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL)
+#define IRQ_CPU_EXTERNAL6	(IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL)
+#define IRQ_CPU_EXTERNAL7	(IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_CPU_IRQS_H */
diff --git a/arch/frv/include/asm/cpumask.h b/arch/frv/include/asm/cpumask.h
new file mode 100644
index 00000000..d999c20c
--- /dev/null
+++ b/arch/frv/include/asm/cpumask.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CPUMASK_H
+#define _ASM_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* _ASM_CPUMASK_H */
diff --git a/arch/frv/include/asm/cputime.h b/arch/frv/include/asm/cputime.h
new file mode 100644
index 00000000..f6c373ad
--- /dev/null
+++ b/arch/frv/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CPUTIME_H
+#define _ASM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_CPUTIME_H */
diff --git a/arch/frv/include/asm/current.h b/arch/frv/include/asm/current.h
new file mode 100644
index 00000000..86b02749
--- /dev/null
+++ b/arch/frv/include/asm/current.h
@@ -0,0 +1,30 @@
+/* current.h: FRV current task pointer
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * dedicate GR29 to keeping the current task pointer
+ */
+register struct task_struct *current asm("gr29");
+
+#define get_current() current
+
+#else
+
+#define CURRENT gr29
+
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/frv/include/asm/delay.h b/arch/frv/include/asm/delay.h
new file mode 100644
index 00000000..597b4ebf
--- /dev/null
+++ b/arch/frv/include/asm/delay.h
@@ -0,0 +1,50 @@
+/* delay.h: FRV delay code
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <asm/param.h>
+#include <asm/timer-regs.h>
+
+/*
+ * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop]
+ */
+extern unsigned long __delay_loops_MHz;
+
+static inline void __delay(unsigned long loops)
+{
+	asm volatile("1:	subicc	%0,#1,%0,icc0	\n"
+		     "		bnc	icc0,#2,1b	\n"
+		     : "=r" (loops)
+		     : "0" (loops)
+		     : "icc0"
+		     );
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void udelay(unsigned long usecs)
+{
+	__delay(usecs * __delay_loops_MHz);
+}
+
+#define ndelay(n)	udelay((n) * 5)
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/frv/include/asm/device.h b/arch/frv/include/asm/device.h
new file mode 100644
index 00000000..d8f9872b
--- /dev/null
+++ b/arch/frv/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/frv/include/asm/div64.h b/arch/frv/include/asm/div64.h
new file mode 100644
index 00000000..6cd978ce
--- /dev/null
+++ b/arch/frv/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/frv/include/asm/dm9000.h b/arch/frv/include/asm/dm9000.h
new file mode 100644
index 00000000..f6f48fd9
--- /dev/null
+++ b/arch/frv/include/asm/dm9000.h
@@ -0,0 +1,37 @@
+/* dm9000.h: Davicom DM9000 adapter configuration
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DM9000_H
+#define _ASM_DM9000_H
+
+#include <asm/mb-regs.h>
+
+#define DM9000_ARCH_IOBASE	(__region_CS6 + 0x300)
+#define DM9000_ARCH_IRQ		IRQ_CPU_EXTERNAL3	/* XIRQ #3 (shared with FPGA) */
+#undef DM9000_ARCH_IRQ_ACTLOW				/* IRQ pin active high */
+#define DM9000_ARCH_BUS_INFO	"CS6#+0x300"		/* bus info for ethtool */
+
+#undef __is_PCI_IO
+#define __is_PCI_IO(addr)	0	/* not PCI */
+
+#undef inl
+#define inl(addr)										\
+({												\
+	unsigned long __ioaddr = (unsigned long) addr;						\
+	uint32_t x = readl(__ioaddr);								\
+	((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff);	\
+})
+
+#undef insl
+#define insl(a,b,l)	__insl(a,b,l,0) /* don't byte-swap */
+
+
+#endif /* _ASM_DM9000_H */
diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h
new file mode 100644
index 00000000..dfb81100
--- /dev/null
+++ b/arch/frv/include/asm/dma-mapping.h
@@ -0,0 +1,135 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/device.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern unsigned long __nongprelbss dma_coherent_mem_start;
+extern unsigned long __nongprelbss dma_coherent_mem_end;
+
+void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+				 enum dma_data_direction direction);
+
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		      enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+extern
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+			size_t size, enum dma_data_direction direction);
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			     enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+				enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+			 enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+			    enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+
+	return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		    enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+#endif  /* _ASM_DMA_MAPPING_H */
diff --git a/arch/frv/include/asm/dma.h b/arch/frv/include/asm/dma.h
new file mode 100644
index 00000000..683c47d4
--- /dev/null
+++ b/arch/frv/include/asm/dma.h
@@ -0,0 +1,125 @@
+/* dma.h: FRV DMA controller management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+//#define DMA_DEBUG 1
+
+#include <linux/interrupt.h>
+
+#undef MAX_DMA_CHANNELS		/* don't use kernel/dma.c */
+
+/* under 2.4 this is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS		PAGE_OFFSET
+
+/*
+ * FRV DMA controller management
+ */
+typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data);
+
+extern void frv_dma_init(void);
+
+extern int frv_dma_open(const char *devname,
+			unsigned long dmamask,
+			int dmacap,
+			dma_irq_handler_t handler,
+			unsigned long irq_flags,
+			void *data);
+
+/* channels required */
+#define FRV_DMA_MASK_ANY	ULONG_MAX	/* any channel */
+
+/* capabilities required */
+#define FRV_DMA_CAP_DREQ	0x01		/* DMA request pin */
+#define FRV_DMA_CAP_DACK	0x02		/* DMA ACK pin */
+#define FRV_DMA_CAP_DONE	0x04		/* DMA done pin */
+
+extern void frv_dma_close(int dma);
+
+extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr);
+
+extern void frv_dma_start(int dma,
+			  unsigned long sba, unsigned long dba,
+			  unsigned long pix, unsigned long six, unsigned long bcl);
+
+extern void frv_dma_restart_circular(int dma, unsigned long six);
+
+extern void frv_dma_stop(int dma);
+
+extern int is_frv_dma_interrupting(int dma);
+
+extern void frv_dma_dump(int dma);
+
+extern void frv_dma_status_clear(int dma);
+
+#define FRV_DMA_NCHANS	8
+#define FRV_DMA_4CHANS	4
+#define FRV_DMA_8CHANS	8
+
+#define DMAC_CCFRx		0x00	/* channel configuration reg */
+#define DMAC_CCFRx_CM_SHIFT	16
+#define DMAC_CCFRx_CM_DA	0x00000000
+#define DMAC_CCFRx_CM_SCA	0x00010000
+#define DMAC_CCFRx_CM_DCA	0x00020000
+#define DMAC_CCFRx_CM_2D	0x00030000
+#define DMAC_CCFRx_ATS_SHIFT	8
+#define DMAC_CCFRx_RS_INTERN	0x00000000
+#define DMAC_CCFRx_RS_EXTERN	0x00000001
+#define DMAC_CCFRx_RS_SHIFT	0
+
+#define DMAC_CSTRx		0x08	/* channel status reg */
+#define DMAC_CSTRx_FS		0x0000003f
+#define DMAC_CSTRx_NE		0x00000100
+#define DMAC_CSTRx_FED		0x00000200
+#define DMAC_CSTRx_WER		0x00000800
+#define DMAC_CSTRx_RER		0x00001000
+#define DMAC_CSTRx_CE		0x00002000
+#define DMAC_CSTRx_INT		0x00800000
+#define DMAC_CSTRx_BUSY		0x80000000
+
+#define DMAC_CCTRx		0x10	/* channel control reg */
+#define DMAC_CCTRx_DSIZ_1	0x00000000
+#define DMAC_CCTRx_DSIZ_2	0x00000001
+#define DMAC_CCTRx_DSIZ_4	0x00000002
+#define DMAC_CCTRx_DSIZ_32	0x00000005
+#define DMAC_CCTRx_DAU_HOLD	0x00000000
+#define DMAC_CCTRx_DAU_INC	0x00000010
+#define DMAC_CCTRx_DAU_DEC	0x00000020
+#define DMAC_CCTRx_SSIZ_1	0x00000000
+#define DMAC_CCTRx_SSIZ_2	0x00000100
+#define DMAC_CCTRx_SSIZ_4	0x00000200
+#define DMAC_CCTRx_SSIZ_32	0x00000500
+#define DMAC_CCTRx_SAU_HOLD	0x00000000
+#define DMAC_CCTRx_SAU_INC	0x00001000
+#define DMAC_CCTRx_SAU_DEC	0x00002000
+#define DMAC_CCTRx_FC		0x08000000
+#define DMAC_CCTRx_ICE		0x10000000
+#define DMAC_CCTRx_IE		0x40000000
+#define DMAC_CCTRx_ACT		0x80000000
+
+#define DMAC_SBAx		0x18	/* source base address reg */
+#define DMAC_DBAx		0x20	/* data base address reg */
+#define DMAC_PIXx		0x28	/* primary index reg */
+#define DMAC_SIXx		0x30	/* secondary index reg */
+#define DMAC_BCLx		0x38	/* byte count limit reg */
+#define DMAC_APRx		0x40	/* alternate pointer reg */
+
+/*
+ * required for PCI + MODULES
+ */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h
new file mode 100644
index 00000000..c3819804
--- /dev/null
+++ b/arch/frv/include/asm/elf.h
@@ -0,0 +1,142 @@
+/* elf.h: FR-V ELF definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68knommu/elf.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+struct elf32_hdr;
+
+/*
+ * ELF header e_flags defines.
+ */
+#define EF_FRV_GPR_MASK         0x00000003 /* mask for # of gprs */
+#define EF_FRV_GPR32		0x00000001 /* Only uses GR on 32-register */
+#define EF_FRV_GPR64		0x00000002 /* Only uses GR on 64-register */
+#define EF_FRV_FPR_MASK         0x0000000c /* mask for # of fprs */
+#define EF_FRV_FPR32		0x00000004 /* Only uses FR on 32-register */
+#define EF_FRV_FPR64		0x00000008 /* Only uses FR on 64-register */
+#define EF_FRV_FPR_NONE		0x0000000C /* Uses software floating-point */
+#define EF_FRV_DWORD_MASK       0x00000030 /* mask for dword support */
+#define EF_FRV_DWORD_YES	0x00000010 /* Assumes stack aligned to 8-byte boundaries. */
+#define EF_FRV_DWORD_NO		0x00000020 /* Assumes stack aligned to 4-byte boundaries. */
+#define EF_FRV_DOUBLE		0x00000040 /* Uses double instructions. */
+#define EF_FRV_MEDIA		0x00000080 /* Uses media instructions. */
+#define EF_FRV_PIC		0x00000100 /* Uses position independent code. */
+#define EF_FRV_NON_PIC_RELOCS	0x00000200 /* Does not use position Independent code. */
+#define EF_FRV_MULADD           0x00000400 /* -mmuladd */
+#define EF_FRV_BIGPIC           0x00000800 /* -fPIC */
+#define EF_FRV_LIBPIC           0x00001000 /* -mlibrary-pic */
+#define EF_FRV_G0               0x00002000 /* -G 0, no small data ptr */
+#define EF_FRV_NOPACK           0x00004000 /* -mnopack */
+#define EF_FRV_FDPIC            0x00008000 /* -mfdpic */
+#define EF_FRV_CPU_MASK         0xff000000 /* specific cpu bits */
+#define EF_FRV_CPU_GENERIC	0x00000000 /* Set CPU type is FR-V */
+#define EF_FRV_CPU_FR500	0x01000000 /* Set CPU type is FR500 */
+#define EF_FRV_CPU_FR300	0x02000000 /* Set CPU type is FR300 */
+#define EF_FRV_CPU_SIMPLE       0x03000000 /* SIMPLE */
+#define EF_FRV_CPU_TOMCAT       0x04000000 /* Tomcat, FR500 prototype */
+#define EF_FRV_CPU_FR400	0x05000000 /* Set CPU type is FR400 */
+#define EF_FRV_CPU_FR550        0x06000000 /* Set CPU type is FR550 */
+#define EF_FRV_CPU_FR405	0x07000000 /* Set CPU type is FR405 */
+#define EF_FRV_CPU_FR450	0x08000000 /* Set CPU type is FR450 */
+
+/*
+ * FR-V ELF relocation types
+ */
+
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpmedia_regs elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+extern int elf_check_arch(const struct elf32_hdr *hdr);
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS))
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_FRV
+
+#define ELF_PLAT_INIT(_r)			\
+do {						\
+	__kernel_frame0_ptr->gr16	= 0;	\
+	__kernel_frame0_ptr->gr17	= 0;	\
+	__kernel_frame0_ptr->gr18	= 0;	\
+	__kernel_frame0_ptr->gr19	= 0;	\
+	__kernel_frame0_ptr->gr20	= 0;	\
+	__kernel_frame0_ptr->gr21	= 0;	\
+	__kernel_frame0_ptr->gr22	= 0;	\
+	__kernel_frame0_ptr->gr23	= 0;	\
+	__kernel_frame0_ptr->gr24	= 0;	\
+	__kernel_frame0_ptr->gr25	= 0;	\
+	__kernel_frame0_ptr->gr26	= 0;	\
+	__kernel_frame0_ptr->gr27	= 0;	\
+	__kernel_frame0_ptr->gr29	= 0;	\
+} while(0)
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)	\
+do {											\
+	__kernel_frame0_ptr->gr16	= _exec_map_addr;				\
+	__kernel_frame0_ptr->gr17	= _interp_map_addr;				\
+	__kernel_frame0_ptr->gr18	= _dynamic_addr;				\
+	__kernel_frame0_ptr->gr19	= 0;						\
+	__kernel_frame0_ptr->gr20	= 0;						\
+	__kernel_frame0_ptr->gr21	= 0;						\
+	__kernel_frame0_ptr->gr22	= 0;						\
+	__kernel_frame0_ptr->gr23	= 0;						\
+	__kernel_frame0_ptr->gr24	= 0;						\
+	__kernel_frame0_ptr->gr25	= 0;						\
+	__kernel_frame0_ptr->gr26	= 0;						\
+	__kernel_frame0_ptr->gr27	= 0;						\
+	__kernel_frame0_ptr->gr29	= 0;						\
+} while(0)
+
+#define CORE_DUMP_USE_REGSET
+#define ELF_FDPIC_CORE_EFLAGS	EF_FRV_FDPIC
+#define ELF_EXEC_PAGESIZE	16384
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0x08000000UL
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
diff --git a/arch/frv/include/asm/emergency-restart.h b/arch/frv/include/asm/emergency-restart.h
new file mode 100644
index 00000000..108d8c48
--- /dev/null
+++ b/arch/frv/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/frv/include/asm/errno.h b/arch/frv/include/asm/errno.h
new file mode 100644
index 00000000..d010795c
--- /dev/null
+++ b/arch/frv/include/asm/errno.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_ERRNO_H */
+
diff --git a/arch/frv/include/asm/exec.h b/arch/frv/include/asm/exec.h
new file mode 100644
index 00000000..65c91305
--- /dev/null
+++ b/arch/frv/include/asm/exec.h
@@ -0,0 +1,17 @@
+/* FR-V CPU executable handling
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_EXEC_H
+#define _ASM_EXEC_H
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_EXEC_H */
diff --git a/arch/frv/include/asm/fb.h b/arch/frv/include/asm/fb.h
new file mode 100644
index 00000000..c7df3803
--- /dev/null
+++ b/arch/frv/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/frv/include/asm/fcntl.h b/arch/frv/include/asm/fcntl.h
new file mode 100644
index 00000000..46ab12db
--- /dev/null
+++ b/arch/frv/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/frv/include/asm/fpu.h b/arch/frv/include/asm/fpu.h
new file mode 100644
index 00000000..d73c60b5
--- /dev/null
+++ b/arch/frv/include/asm/fpu.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_FPU_H
+#define __ASM_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0)
+
+#endif /* __ASM_FPU_H */
diff --git a/arch/frv/include/asm/ftrace.h b/arch/frv/include/asm/ftrace.h
new file mode 100644
index 00000000..40a8c178
--- /dev/null
+++ b/arch/frv/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/frv/include/asm/futex.h b/arch/frv/include/asm/futex.h
new file mode 100644
index 00000000..4bea27f5
--- /dev/null
+++ b/arch/frv/include/asm/futex.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/uaccess.h>
+
+extern int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr);
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	return -ENOSYS;
+}
+
+#endif
+#endif
diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h
new file mode 100644
index 00000000..e6bedd0c
--- /dev/null
+++ b/arch/frv/include/asm/gdb-stub.h
@@ -0,0 +1,146 @@
+/* gdb-stub.h: FRV GDB stub
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_GDB_STUB_H
+#define __ASM_GDB_STUB_H
+
+#undef GDBSTUB_DEBUG_IO
+#undef GDBSTUB_DEBUG_PROTOCOL
+
+#include <asm/ptrace.h>
+
+/*
+ * important register numbers in GDB protocol
+ * - GR0,  GR1,  GR2,  GR3,  GR4,  GR5,  GR6,  GR7,
+ * - GR8,  GR9,  GR10, GR11, GR12, GR13, GR14, GR15,
+ * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23,
+ * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31,
+ * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39,
+ * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47,
+ * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55,
+ * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63,
+ * - FR0,  FR1,  FR2,  FR3,  FR4,  FR5,  FR6,  FR7,
+ * - FR8,  FR9,  FR10, FR11, FR12, FR13, FR14, FR15,
+ * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23,
+ * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31,
+ * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39,
+ * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47,
+ * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55,
+ * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63,
+ * - PC, PSR, CCR, CCCR,
+ * - _X132, _X133, _X134
+ * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3,
+ * - SCR0, SCR1, SCR2, SCR3,
+ * - LR, LCR,
+ * - IACC0H, IACC0L,
+ * - FSR0,
+ * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7,
+ * - ACCG0123, ACCG4567,
+ * - MSR0, MSR1,
+ * - GNER0, GNER1,
+ * - FNER0, FNER1,
+ */
+#define GDB_REG_GR(N)	(N)
+#define GDB_REG_FR(N)	(64+(N))
+#define GDB_REG_PC	128
+#define GDB_REG_PSR	129
+#define GDB_REG_CCR	130
+#define GDB_REG_CCCR	131
+#define GDB_REG_TBR	135
+#define GDB_REG_BRR	136
+#define GDB_REG_DBAR(N)	(137+(N))
+#define GDB_REG_SCR(N)	(141+(N))
+#define GDB_REG_LR	145
+#define GDB_REG_LCR	146
+#define GDB_REG_FSR0	149
+#define GDB_REG_ACC(N)	(150+(N))
+#define GDB_REG_ACCG(N)	(158+(N)/4)
+#define GDB_REG_MSR(N)	(160+(N))
+#define GDB_REG_GNER(N)	(162+(N))
+#define GDB_REG_FNER(N)	(164+(N))
+
+#define GDB_REG_SP	GDB_REG_GR(1)
+#define GDB_REG_FP	GDB_REG_GR(2)
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern void gdbstub_init(void);
+extern void gdbstub(int type);
+extern void gdbstub_exit(int status);
+
+extern void gdbstub_io_init(void);
+extern void gdbstub_set_baud(unsigned baud);
+extern int gdbstub_rx_char(unsigned char *_ch, int nonblock);
+extern void gdbstub_tx_char(unsigned char ch);
+extern void gdbstub_tx_flush(void);
+extern void gdbstub_do_rx(void);
+
+extern asmlinkage void __debug_stub_init_break(void);
+extern asmlinkage void __break_hijack_kernel_event(void);
+extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
+
+extern asmlinkage void gdbstub_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(void);
+extern asmlinkage void gdbstub_intercept(void);
+
+extern uint32_t __entry_usertrap_table[];
+extern uint32_t __entry_kerneltrap_table[];
+
+extern volatile u8	gdbstub_rx_buffer[PAGE_SIZE];
+extern volatile u32	gdbstub_rx_inp;
+extern volatile u32	gdbstub_rx_outp;
+extern volatile u8	gdbstub_rx_overflow;
+extern u8		gdbstub_rx_unget;
+
+extern void gdbstub_printk(const char *fmt, ...);
+extern void debug_to_serial(const char *p, int n);
+extern void console_set_baud(unsigned baud);
+
+#ifdef GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT,...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT,...) ({ 0; })
+#endif
+
+#ifdef GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT,...) ({ 0; })
+#endif
+
+/*
+ * we dedicate GR31 to keeping a pointer to the gdbstub exception frame
+ * - gr31 is destroyed on entry to the gdbstub if !MMU
+ * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU
+ */
+register struct frv_frame0 *__debug_frame0 asm("gr31");
+
+#define __debug_frame		(&__debug_frame0->regs)
+#define __debug_user_context	(&__debug_frame0->uc)
+#define __debug_regs		(&__debug_frame0->debug)
+#define __debug_reg(X)		((unsigned long *) ((unsigned long) &__debug_frame0 + (X)))
+
+struct frv_debug_status {
+	unsigned long		bpsr;
+	unsigned long		dcr;
+	unsigned long		brr;
+	unsigned long		nmar;
+};
+
+extern struct frv_debug_status __debug_status;
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* __ASM_GDB_STUB_H */
diff --git a/arch/frv/include/asm/gpio-regs.h b/arch/frv/include/asm/gpio-regs.h
new file mode 100644
index 00000000..9edf5d5d
--- /dev/null
+++ b/arch/frv/include/asm/gpio-regs.h
@@ -0,0 +1,116 @@
+/* gpio-regs.h: on-chip general purpose I/O registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_GPIO_REGS
+#define _ASM_GPIO_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_PDR()	({ __reg(0xfeff0400); })
+#define __set_PDR(V)	do { __reg(0xfeff0400) = (V); mb(); } while(0)
+
+#define __get_GPDR()	({ __reg(0xfeff0408); })
+#define __set_GPDR(V)	do { __reg(0xfeff0408) = (V); mb(); } while(0)
+
+#define __get_SIR()	({ __reg(0xfeff0410); })
+#define __set_SIR(V)	do { __reg(0xfeff0410) = (V); mb(); } while(0)
+
+#define __get_SOR()	({ __reg(0xfeff0418); })
+#define __set_SOR(V)	do { __reg(0xfeff0418) = (V); mb(); } while(0)
+
+#define __set_PDSR(V)	do { __reg(0xfeff0420) = (V); mb(); } while(0)
+
+#define __set_PDCR(V)	do { __reg(0xfeff0428) = (V); mb(); } while(0)
+
+#define __get_RSTR()	({ __reg(0xfeff0500); })
+#define __set_RSTR(V)	do { __reg(0xfeff0500) = (V); mb(); } while(0)
+
+
+
+/* PDR definitions */
+#define PDR_GPIO_DATA(X)	(1 << (X))
+
+/* GPDR definitions */
+#define GPDR_INPUT		0
+#define GPDR_OUTPUT		1
+#define GPDR_DREQ0_BIT		0x00001000
+#define GPDR_DREQ1_BIT		0x00008000
+#define GPDR_DREQ2_BIT		0x00040000
+#define GPDR_DREQ3_BIT		0x00080000
+#define GPDR_DREQ4_BIT		0x00004000
+#define GPDR_DREQ5_BIT		0x00020000
+#define GPDR_DREQ6_BIT		0x00100000
+#define GPDR_DREQ7_BIT		0x00200000
+#define GPDR_DACK0_BIT		0x00002000
+#define GPDR_DACK1_BIT		0x00010000
+#define GPDR_DACK2_BIT		0x00100000
+#define GPDR_DACK3_BIT		0x00200000
+#define GPDR_DONE0_BIT		0x00004000
+#define GPDR_DONE1_BIT		0x00020000
+#define GPDR_GPIO_DIR(X,D)	((D) << (X))
+
+/* SIR definitions */
+#define SIR_GPIO_INPUT		0
+#define SIR_DREQ7_INPUT		0x00200000
+#define SIR_DREQ6_INPUT		0x00100000
+#define SIR_DREQ3_INPUT		0x00080000
+#define SIR_DREQ2_INPUT		0x00040000
+#define SIR_DREQ5_INPUT		0x00020000
+#define SIR_DREQ1_INPUT		0x00008000
+#define SIR_DREQ4_INPUT		0x00004000
+#define SIR_DREQ0_INPUT		0x00001000
+#define SIR_RXD1_INPUT		0x00000400
+#define SIR_CTS0_INPUT		0x00000100
+#define SIR_RXD0_INPUT		0x00000040
+#define SIR_GATE1_INPUT		0x00000020
+#define SIR_GATE0_INPUT		0x00000010
+#define SIR_IRQ3_INPUT		0x00000008
+#define SIR_IRQ2_INPUT		0x00000004
+#define SIR_IRQ1_INPUT		0x00000002
+#define SIR_IRQ0_INPUT		0x00000001
+#define SIR_DREQ_BITS		(SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \
+				 SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \
+				 SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \
+				 SIR_DREQ6_INPUT | SIR_DREQ7_INPUT)
+
+/* SOR definitions */
+#define SOR_GPIO_OUTPUT		0
+#define SOR_DACK3_OUTPUT	0x00200000
+#define SOR_DACK2_OUTPUT	0x00100000
+#define SOR_DONE1_OUTPUT	0x00020000
+#define SOR_DACK1_OUTPUT	0x00010000
+#define SOR_DONE0_OUTPUT	0x00004000
+#define SOR_DACK0_OUTPUT	0x00002000
+#define SOR_TXD1_OUTPUT		0x00000800
+#define SOR_RTS0_OUTPUT		0x00000200
+#define SOR_TXD0_OUTPUT		0x00000080
+#define SOR_TOUT1_OUTPUT	0x00000020
+#define SOR_TOUT0_OUTPUT	0x00000010
+#define SOR_DONE_BITS		(SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT)
+#define SOR_DACK_BITS		(SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \
+				 SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT)
+
+/* PDSR definitions */
+#define PDSR_UNCHANGED		0
+#define PDSR_SET_BIT(X)		(1 << (X))
+
+/* PDCR definitions */
+#define PDCR_UNCHANGED		0
+#define PDCR_CLEAR_BIT(X)	(1 << (X))
+
+/* RSTR definitions */
+/* Read Only */
+#define RSTR_POWERON		0x00000400
+#define RSTR_SOFTRESET_STATUS	0x00000100
+/* Write Only */
+#define RSTR_SOFTRESET		0x00000001
+
+#endif /* _ASM_GPIO_REGS */
diff --git a/arch/frv/include/asm/hardirq.h b/arch/frv/include/asm/hardirq.h
new file mode 100644
index 00000000..c62833d6
--- /dev/null
+++ b/arch/frv/include/asm/hardirq.h
@@ -0,0 +1,26 @@
+/* hardirq.h: FRV hardware IRQ management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/atomic.h>
+
+extern atomic_t irq_err_count;
+static inline void ack_bad_irq(int irq)
+{
+	atomic_inc(&irq_err_count);
+}
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
+
+#endif
diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h
new file mode 100644
index 00000000..716956a5
--- /dev/null
+++ b/arch/frv/include/asm/highmem.h
@@ -0,0 +1,167 @@
+/* highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * See Documentation/frv/mmu-layout.txt for more information.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <asm/mem-layout.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+
+#define NR_TLB_LINES		64	/* number of lines in the TLB */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define HIGHMEM_DEBUG 1
+#else
+#define HIGHMEM_DEBUG 0
+#endif
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+#define kmap_prot PAGE_KERNEL
+#define kmap_pte ______kmap_pte_in_TLB
+extern pte_t *pkmap_page_table;
+
+#define flush_cache_kmaps()  do { } while (0)
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP	PTRS_PER_PTE
+#define LAST_PKMAP_MASK	(LAST_PKMAP - 1)
+#define PKMAP_NR(virt)	((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+
+extern struct page *kmap_atomic_to_page(void *ptr);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+#define KMAP_ATOMIC_CACHE_DAMR		8
+
+#ifndef __ASSEMBLY__
+
+#define __kmap_atomic_primary(type, paddr, ampr)						\
+({												\
+	unsigned long damlr, dampr;								\
+												\
+	dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V;		\
+												\
+	if (type != __KM_CACHE)									\
+		asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory");			\
+	else											\
+		asm volatile("movgs %0,iampr"#ampr"\n"						\
+			     "movgs %0,dampr"#ampr"\n"						\
+			     :: "r"(dampr) : "memory"						\
+			     );									\
+												\
+	asm("movsg damlr"#ampr",%0" : "=r"(damlr));						\
+												\
+	/*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/		\
+												\
+	(void *) damlr;										\
+})
+
+#define __kmap_atomic_secondary(slot, paddr)							  \
+({												  \
+	unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE;			  \
+	unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
+												  \
+	asm volatile("movgs %0,tplr \n"								  \
+		     "movgs %1,tppr \n"								  \
+		     "tlbpr %0,gr0,#2,#1"							  \
+		     : : "r"(damlr), "r"(dampr) : "memory");					  \
+												  \
+	/*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/			  \
+												  \
+	(void *) damlr;										  \
+})
+
+static inline void *kmap_atomic_primary(struct page *page, enum km_type type)
+{
+	unsigned long paddr;
+
+	pagefault_disable();
+	paddr = page_to_phys(page);
+
+	switch (type) {
+        case 0:		return __kmap_atomic_primary(0, paddr, 2);
+        case 1:		return __kmap_atomic_primary(1, paddr, 3);
+        case 2:		return __kmap_atomic_primary(2, paddr, 4);
+        case 3:		return __kmap_atomic_primary(3, paddr, 5);
+
+	default:
+		BUG();
+		return NULL;
+	}
+}
+
+#define __kunmap_atomic_primary(type, ampr)				\
+do {									\
+	asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory");		\
+	if (type == __KM_CACHE)						\
+		asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory");	\
+} while(0)
+
+#define __kunmap_atomic_secondary(slot, vaddr)				\
+do {									\
+	asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory");	\
+} while(0)
+
+static inline void kunmap_atomic_primary(void *kvaddr, enum km_type type)
+{
+	switch (type) {
+        case 0:		__kunmap_atomic_primary(0, 2);	break;
+        case 1:		__kunmap_atomic_primary(1, 3);	break;
+        case 2:		__kunmap_atomic_primary(2, 4);	break;
+        case 3:		__kunmap_atomic_primary(3, 5);	break;
+
+	default:
+		BUG();
+	}
+	pagefault_enable();
+}
+
+void *kmap_atomic(struct page *page);
+void __kunmap_atomic(void *kvaddr);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/frv/include/asm/hw_irq.h b/arch/frv/include/asm/hw_irq.h
new file mode 100644
index 00000000..522ad379
--- /dev/null
+++ b/arch/frv/include/asm/hw_irq.h
@@ -0,0 +1,16 @@
+/* hw_irq.h: FR-V specific h/w IRQ stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h
new file mode 100644
index 00000000..8cb50a2f
--- /dev/null
+++ b/arch/frv/include/asm/io.h
@@ -0,0 +1,392 @@
+/* io.h: FRV I/O operations
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This gets interesting when talking to the PCI bus - the CPU is in big endian
+ * mode, the PCI bus is little endian and the hardware in the middle can do
+ * byte swapping
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/virtconvert.h>
+#include <asm/string.h>
+#include <asm/mb-regs.h>
+#include <asm-generic/pci_iomap.h>
+#include <linux/delay.h>
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+
+static inline unsigned short _swapw(unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned long _swapl(unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+//#define __iormb() asm volatile("membar")
+//#define __iowmb() asm volatile("membar")
+
+#define __raw_readb __builtin_read8
+#define __raw_readw __builtin_read16
+#define __raw_readl __builtin_read32
+
+#define __raw_writeb(datum, addr) __builtin_write8(addr, datum)
+#define __raw_writew(datum, addr) __builtin_write16(addr, datum)
+#define __raw_writel(datum, addr) __builtin_write32(addr, datum)
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+	unsigned long __ioaddr = (unsigned long) addr;
+	const uint8_t *bp = buf;
+
+	while (len--)
+		__builtin_write8((volatile void __iomem *) __ioaddr, *bp++);
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+	unsigned long __ioaddr = (unsigned long) addr;
+	const uint16_t *bp = buf;
+
+	while (len--)
+		__builtin_write16((volatile void __iomem *) __ioaddr, (*bp++));
+}
+
+extern void __outsl_ns(unsigned int addr, const void *buf, int len);
+extern void __outsl_sw(unsigned int addr, const void *buf, int len);
+static inline void __outsl(unsigned int addr, const void *buf, int len, int swap)
+{
+	unsigned long __ioaddr = (unsigned long) addr;
+
+	if (!swap)
+		__outsl_ns(__ioaddr, buf, len);
+	else
+		__outsl_sw(__ioaddr, buf, len);
+}
+
+static inline void io_insb(unsigned long addr, void *buf, int len)
+{
+	uint8_t *bp = buf;
+
+	while (len--)
+		*bp++ = __builtin_read8((volatile void __iomem *) addr);
+}
+
+static inline void io_insw(unsigned long addr, void *buf, int len)
+{
+	uint16_t *bp = buf;
+
+	while (len--)
+		*bp++ = __builtin_read16((volatile void __iomem *) addr);
+}
+
+extern void __insl_ns(unsigned long addr, void *buf, int len);
+extern void __insl_sw(unsigned long addr, void *buf, int len);
+static inline void __insl(unsigned long addr, void *buf, int len, int swap)
+{
+	if (!swap)
+		__insl_ns(addr, buf, len);
+	else
+		__insl_sw(addr, buf, len);
+}
+
+#define mmiowb() mb()
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+
+static inline uint8_t inb(unsigned long addr)
+{
+	return __builtin_read8((void __iomem *)addr);
+}
+
+static inline uint16_t inw(unsigned long addr)
+{
+	uint16_t ret = __builtin_read16((void __iomem *)addr);
+
+	if (__is_PCI_IO(addr))
+		ret = _swapw(ret);
+
+	return ret;
+}
+
+static inline uint32_t inl(unsigned long addr)
+{
+	uint32_t ret = __builtin_read32((void __iomem *)addr);
+
+	if (__is_PCI_IO(addr))
+		ret = _swapl(ret);
+
+	return ret;
+}
+
+static inline void outb(uint8_t datum, unsigned long addr)
+{
+	__builtin_write8((void __iomem *)addr, datum);
+}
+
+static inline void outw(uint16_t datum, unsigned long addr)
+{
+	if (__is_PCI_IO(addr))
+		datum = _swapw(datum);
+	__builtin_write16((void __iomem *)addr, datum);
+}
+
+static inline void outl(uint32_t datum, unsigned long addr)
+{
+	if (__is_PCI_IO(addr))
+		datum = _swapl(datum);
+	__builtin_write32((void __iomem *)addr, datum);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x,addr)	outb(x,addr)
+#define outw_p(x,addr)	outw(x,addr)
+#define outl_p(x,addr)	outl(x,addr)
+
+#define outsb(a,b,l)	io_outsb(a,b,l)
+#define outsw(a,b,l)	io_outsw(a,b,l)
+#define outsl(a,b,l)	__outsl(a,b,l,0)
+
+#define insb(a,b,l)	io_insb(a,b,l)
+#define insw(a,b,l)	io_insw(a,b,l)
+#define insl(a,b,l)	__insl(a,b,l,0)
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+static inline uint8_t readb(const volatile void __iomem *addr)
+{
+	return __builtin_read8((__force void volatile __iomem *) addr);
+}
+
+static inline uint16_t readw(const volatile void __iomem *addr)
+{
+	uint16_t ret =	__builtin_read16((__force void volatile __iomem *)addr);
+
+	if (__is_PCI_MEM(addr))
+		ret = _swapw(ret);
+	return ret;
+}
+
+static inline uint32_t readl(const volatile void __iomem *addr)
+{
+	uint32_t ret =	__builtin_read32((__force void volatile __iomem *)addr);
+
+	if (__is_PCI_MEM(addr))
+		ret = _swapl(ret);
+
+	return ret;
+}
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(uint8_t datum, volatile void __iomem *addr)
+{
+	__builtin_write8(addr, datum);
+	if (__is_PCI_MEM(addr))
+		__flush_PCI_writes();
+}
+
+static inline void writew(uint16_t datum, volatile void __iomem *addr)
+{
+	if (__is_PCI_MEM(addr))
+		datum = _swapw(datum);
+
+	__builtin_write16(addr, datum);
+	if (__is_PCI_MEM(addr))
+		__flush_PCI_writes();
+}
+
+static inline void writel(uint32_t datum, volatile void __iomem *addr)
+{
+	if (__is_PCI_MEM(addr))
+		datum = _swapl(datum);
+
+	__builtin_write32(addr, datum);
+	if (__is_PCI_MEM(addr))
+		__flush_PCI_writes();
+}
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define ioremap_wc ioremap_nocache
+
+extern void iounmap(void volatile __iomem *addr);
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+static inline void flush_write_buffers(void)
+{
+	__asm__ __volatile__ ("membar" : : :"memory");
+}
+
+/*
+ * do appropriate I/O accesses for token type
+ */
+static inline unsigned int ioread8(void __iomem *p)
+{
+	return __builtin_read8(p);
+}
+
+static inline unsigned int ioread16(void __iomem *p)
+{
+	uint16_t ret = __builtin_read16(p);
+	if (__is_PCI_addr(p))
+		ret = _swapw(ret);
+	return ret;
+}
+
+static inline unsigned int ioread32(void __iomem *p)
+{
+	uint32_t ret = __builtin_read32(p);
+	if (__is_PCI_addr(p))
+		ret = _swapl(ret);
+	return ret;
+}
+
+static inline void iowrite8(u8 val, void __iomem *p)
+{
+	__builtin_write8(p, val);
+	if (__is_PCI_MEM(p))
+		__flush_PCI_writes();
+}
+
+static inline void iowrite16(u16 val, void __iomem *p)
+{
+	if (__is_PCI_addr(p))
+		val = _swapw(val);
+	__builtin_write16(p, val);
+	if (__is_PCI_MEM(p))
+		__flush_PCI_writes();
+}
+
+static inline void iowrite32(u32 val, void __iomem *p)
+{
+	if (__is_PCI_addr(p))
+		val = _swapl(val);
+	__builtin_write32(p, val);
+	if (__is_PCI_MEM(p))
+		__flush_PCI_writes();
+}
+
+static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count)
+{
+	io_insb((unsigned long) p, dst, count);
+}
+
+static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count)
+{
+	io_insw((unsigned long) p, dst, count);
+}
+
+static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count)
+{
+	__insl_ns((unsigned long) p, dst, count);
+}
+
+static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count)
+{
+	io_outsb((unsigned long) p, src, count);
+}
+
+static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count)
+{
+	io_outsw((unsigned long) p, src, count);
+}
+
+static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count)
+{
+	__outsl_ns((unsigned long) p, src, count);
+}
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/arch/frv/include/asm/ioctl.h b/arch/frv/include/asm/ioctl.h
new file mode 100644
index 00000000..b279fe06
--- /dev/null
+++ b/arch/frv/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h
new file mode 100644
index 00000000..2f9fb436
--- /dev/null
+++ b/arch/frv/include/asm/ioctls.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_IOCTLS_H__
+#define __ASM_IOCTLS_H__
+
+#define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
+#define FIOQSIZE	0x545E
+
+#include <asm-generic/ioctls.h>
+
+#endif /* __ASM_IOCTLS_H__ */
+
diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h
new file mode 100644
index 00000000..84c7e51c
--- /dev/null
+++ b/arch/frv/include/asm/ipcbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/frv/include/asm/irc-regs.h b/arch/frv/include/asm/irc-regs.h
new file mode 100644
index 00000000..afa30aea
--- /dev/null
+++ b/arch/frv/include/asm/irc-regs.h
@@ -0,0 +1,53 @@
+/* irc-regs.h: on-chip interrupt controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRC_REGS
+#define _ASM_IRC_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_TM0()	({ __reg(0xfeff9800); })
+#define __get_TM1()	({ __reg(0xfeff9808); })
+#define __set_TM1(V)	do { __reg(0xfeff9808) = (V); mb(); } while(0)
+
+#define __set_TM1x(XI,V)			\
+do {						\
+	int shift = (XI) * 2 + 16;		\
+	unsigned long tm1 = __reg(0xfeff9808);	\
+	tm1 &= ~(0x3 << shift);			\
+	tm1 |= (V) << shift;			\
+	__reg(0xfeff9808) = tm1;		\
+	mb();					\
+} while(0)
+
+#define __get_RS(C)	({ (__reg(0xfeff9810) >> ((C)+16)) & 1; })
+
+#define __clr_RC(C)	do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0)
+
+#define __get_MASK(C)	({ (__reg(0xfeff9820) >> ((C)+16)) & 1; })
+#define __set_MASK(C)	do { __reg(0xfeff9820) |=  1 << ((C)+16); mb(); } while(0)
+#define __clr_MASK(C)	do { __reg(0xfeff9820) &=  ~(1 << ((C)+16)); mb(); } while(0)
+
+#define __get_MASK_all() __get_MASK(0)
+#define __set_MASK_all() __set_MASK(0)
+#define __clr_MASK_all() __clr_MASK(0)
+
+#define __get_IRL()	({ (__reg(0xfeff9828) >> 16) & 0xf; })
+#define __clr_IRL()	do { __reg(0xfeff9828) = 0x100000; mb(); } while(0)
+
+#define __get_IRR(N)	({ __reg(0xfeff9840 + (N) * 8); })
+#define __set_IRR(N,V)	do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0)
+
+#define __get_IITMR(N)	({ __reg(0xfeff9880 + (N) * 8); })
+#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0)
+
+
+#endif /* _ASM_IRC_REGS */
diff --git a/arch/frv/include/asm/irq.h b/arch/frv/include/asm/irq.h
new file mode 100644
index 00000000..3a66ebd7
--- /dev/null
+++ b/arch/frv/include/asm/irq.h
@@ -0,0 +1,30 @@
+/* irq.h: FRV IRQ definitions
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_H_
+#define _ASM_IRQ_H_
+
+#define NR_IRQS				48
+#define IRQ_BASE_CPU			(0 * 16)
+#define IRQ_BASE_FPGA			(1 * 16)
+#define IRQ_BASE_MB93493		(2 * 16)
+
+/* probe returns a 32-bit IRQ mask:-/ */
+#define MIN_PROBE_IRQ			(NR_IRQS - 32)
+
+#ifndef __ASSEMBLY__
+static inline int irq_canonicalize(int irq)
+{
+	return irq;
+}
+#endif
+
+#endif /* _ASM_IRQ_H_ */
diff --git a/arch/frv/include/asm/irq_regs.h b/arch/frv/include/asm/irq_regs.h
new file mode 100644
index 00000000..d22e8328
--- /dev/null
+++ b/arch/frv/include/asm/irq_regs.h
@@ -0,0 +1,27 @@
+/* FRV per-CPU frame pointer holder
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ * - on FRV, GR28 is dedicated to keeping a pointer to the current exception
+ *   frame
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/arch/frv/include/asm/irqflags.h b/arch/frv/include/asm/irqflags.h
new file mode 100644
index 00000000..82f0b536
--- /dev/null
+++ b/arch/frv/include/asm/irqflags.h
@@ -0,0 +1,158 @@
+/* FR-V interrupt handling
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+/*
+ * interrupt flag manipulation
+ * - use virtual interrupt management since touching the PSR is slow
+ *   - ICC2.Z: T if interrupts virtually disabled
+ *   - ICC2.C: F if interrupts really disabled
+ * - if Z==1 upon interrupt:
+ *   - C is set to 0
+ *   - interrupts are really disabled
+ *   - entry.S returns immediately
+ * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts
+ *   - if taken, the trap:
+ *     - sets ICC2.C
+ *     - enables interrupts
+ */
+static inline void arch_local_irq_disable(void)
+{
+	/* set Z flag, but don't change the C flag */
+	asm volatile("	andcc	gr0,gr0,gr0,icc2	\n"
+		     :
+		     :
+		     : "memory", "icc2"
+		     );
+}
+
+static inline void arch_local_irq_enable(void)
+{
+	/* clear Z flag and then test the C flag */
+	asm volatile("  oricc	gr0,#1,gr0,icc2		\n"
+		     "	tihi	icc2,gr0,#2		\n"
+		     :
+		     :
+		     : "memory", "icc2"
+		     );
+}
+
+static inline unsigned long arch_local_save_flags(void)
+{
+	unsigned long flags;
+
+	asm volatile("movsg ccr,%0"
+		     : "=r"(flags)
+		     :
+		     : "memory");
+
+	/* shift ICC2.Z to bit 0 */
+	flags >>= 26;
+
+	/* make flags 1 if interrupts disabled, 0 otherwise */
+	return flags & 1UL;
+
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags = arch_local_save_flags();
+	arch_local_irq_disable();
+	return flags;
+}
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	/* load the Z flag by turning 1 if disabled into 0 if disabled
+	 * and thus setting the Z flag but not the C flag */
+	asm volatile("  xoricc	%0,#1,gr0,icc2		\n"
+		     /* then trap if Z=0 and C=0 */
+		     "	tihi	icc2,gr0,#2		\n"
+		     :
+		     : "r"(flags)
+		     : "memory", "icc2"
+		     );
+
+}
+
+static inline bool arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags;
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+/*
+ * real interrupt flag manipulation
+ */
+#define __arch_local_irq_disable()			\
+do {							\
+	unsigned long psr;				\
+	asm volatile("	movsg	psr,%0		\n"	\
+		     "	andi	%0,%2,%0	\n"	\
+		     "	ori	%0,%1,%0	\n"	\
+		     "	movgs	%0,psr		\n"	\
+		     : "=r"(psr)			\
+		     : "i" (PSR_PIL_14), "i" (~PSR_PIL)	\
+		     : "memory");			\
+} while (0)
+
+#define __arch_local_irq_enable()			\
+do {							\
+	unsigned long psr;				\
+	asm volatile("	movsg	psr,%0		\n"	\
+		     "	andi	%0,%1,%0	\n"	\
+		     "	movgs	%0,psr		\n"	\
+		     : "=r"(psr)			\
+		     : "i" (~PSR_PIL)			\
+		     : "memory");			\
+} while (0)
+
+#define __arch_local_save_flags(flags)		\
+do {						\
+	typecheck(unsigned long, flags);	\
+	asm("movsg psr,%0"			\
+	    : "=r"(flags)			\
+	    :					\
+	    : "memory");			\
+} while (0)
+
+#define	__arch_local_irq_save(flags)			\
+do {							\
+	unsigned long npsr;				\
+	typecheck(unsigned long, flags);		\
+	asm volatile("	movsg	psr,%0		\n"	\
+		     "	andi	%0,%3,%1	\n"	\
+		     "	ori	%1,%2,%1	\n"	\
+		     "	movgs	%1,psr		\n"	\
+		     : "=r"(flags), "=r"(npsr)		\
+		     : "i" (PSR_PIL_14), "i" (~PSR_PIL)	\
+		     : "memory");			\
+} while (0)
+
+#define	__arch_local_irq_restore(flags)			\
+do {							\
+	typecheck(unsigned long, flags);		\
+	asm volatile("	movgs	%0,psr		\n"	\
+		     :					\
+		     : "r" (flags)			\
+		     : "memory");			\
+} while (0)
+
+#define __arch_irqs_disabled()			\
+	((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
+
+#endif /* _ASM_IRQFLAGS_H */
diff --git a/arch/frv/include/asm/kdebug.h b/arch/frv/include/asm/kdebug.h
new file mode 100644
index 00000000..6ece1b03
--- /dev/null
+++ b/arch/frv/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/frv/include/asm/kmap_types.h b/arch/frv/include/asm/kmap_types.h
new file mode 100644
index 00000000..f8e16b2a
--- /dev/null
+++ b/arch/frv/include/asm/kmap_types.h
@@ -0,0 +1,29 @@
+
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	/* arch specific kmaps - change the numbers attached to these at your peril */
+	__KM_CACHE,		/* cache flush page attachment point */
+	__KM_PGD,		/* current page directory */
+	__KM_ITLB_PTD,		/* current instruction TLB miss page table lookup */
+	__KM_DTLB_PTD,		/* current data TLB miss page table lookup */
+
+	/* general kmaps */
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/frv/include/asm/linkage.h b/arch/frv/include/asm/linkage.h
new file mode 100644
index 00000000..636c1bce
--- /dev/null
+++ b/arch/frv/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN		.align 4
+#define __ALIGN_STR	".align 4"
+
+#endif
diff --git a/arch/frv/include/asm/local.h b/arch/frv/include/asm/local.h
new file mode 100644
index 00000000..c27bdf04
--- /dev/null
+++ b/arch/frv/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_LOCAL_H
+#define _ASM_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_LOCAL_H */
diff --git a/arch/frv/include/asm/local64.h b/arch/frv/include/asm/local64.h
new file mode 100644
index 00000000..36c93b5c
--- /dev/null
+++ b/arch/frv/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/frv/include/asm/math-emu.h b/arch/frv/include/asm/math-emu.h
new file mode 100644
index 00000000..0c8f731b
--- /dev/null
+++ b/arch/frv/include/asm/math-emu.h
@@ -0,0 +1,301 @@
+#ifndef _ASM_MATH_EMU_H
+#define _ASM_MATH_EMU_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX	3
+#define FPSR_AEXC_DZ	4
+#define FPSR_AEXC_UNFL	5
+#define FPSR_AEXC_OVFL	6
+#define FPSR_AEXC_IOP	7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1	8
+#define FPSR_EXC_INEX2	9
+#define FPSR_EXC_DZ	10
+#define FPSR_EXC_UNFL	11
+#define FPSR_EXC_OVFL	12
+#define FPSR_EXC_OPERR	13
+#define FPSR_EXC_SNAN	14
+#define FPSR_EXC_BSUN	15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN	24
+#define FPSR_CC_INF	25
+#define FPSR_CC_Z	26
+#define FPSR_CC_NEG	27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define	FPCR_ROUND_RN	0		/* round to nearest/even */
+#define FPCR_ROUND_RZ	1		/* round to zero */
+#define FPCR_ROUND_RM	2		/* minus infinity */
+#define FPCR_ROUND_RP	3		/* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X	0	/* long double */
+#define FPCR_PRECISION_S	1	/* double */
+#define FPCR_PRECISION_D	2	/* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE		0
+#define PEXECUTE	1
+#define PCONV		2
+#define PNORM		3
+#define PREGISTER	4
+#define PINSTR		5
+#define PUNIMPL		6
+#define PMOVEM		7
+
+#define PMDECODE	(1<<PDECODE)
+#define PMEXECUTE	(1<<PEXECUTE)
+#define PMCONV		(1<<PCONV)
+#define PMNORM		(1<<PNORM)
+#define PMREGISTER	(1<<PREGISTER)
+#define PMINSTR		(1<<PINSTR)
+#define PMUNIMPL	(1<<PUNIMPL)
+#define PMMOVEM		(1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+	unsigned long long m64;
+	unsigned long m32[2];
+};
+
+union fp_mant128 {
+	unsigned long long m64[2];
+	unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+	unsigned char lowmant;
+	unsigned char sign;
+	unsigned short exp;
+	union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+   below and the size in <asm/fpu.h>, too */
+struct fp_data {
+	struct fp_ext fpreg[8];
+	unsigned int fpcr;
+	unsigned int fpsr;
+	unsigned int fpiar;
+	unsigned short prec;
+	unsigned short rnd;
+	struct fp_ext temp[2];
+};
+
+#if FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({			\
+	if (fp_debugprint & (1 << (bit)))		\
+		printk(fmt, ## args);			\
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({					\
+	static int __count = 3;				\
+							\
+	if (__count > 0) {				\
+		printk("You just hit an unimplemented "	\
+		       "fpu instruction (%s)\n", str);	\
+		printk("Please report this to ....\n");	\
+		__count--;				\
+	}						\
+})
+
+#define FPDATA		((struct fp_data *)current->thread.fp)
+
+#else	/* __ASSEMBLY__ */
+
+#define FPDATA		%a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG	(TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR	(TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR	(TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR	(TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC	(TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND		(TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1	(TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2	(TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF	(TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO		(PT_D0)
+#define FPS_D1		(PT_D1)
+#define FPS_D2		(PT_D2)
+#define FPS_A0		(PT_A0)
+#define FPS_A1		(PT_A1)
+#define FPS_A2		(PT_A2)
+#define FPS_SR		(PT_SR)
+#define FPS_PC		(PT_PC)
+#define FPS_EA		(PT_PC+6)
+#define FPS_PC2		(PT_PC+10)
+
+.macro	fp_get_fp_reg
+	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
+	lea	(%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro	fp_get_pc dest
+	move.l	(FPS_PC+4,%sp),\dest
+.endm
+
+.macro	fp_put_pc src,jump=0
+	move.l	\src,(FPS_PC+4,%sp)
+.endm
+
+.macro	fp_get_instr_data	f,s,dest,label
+	getuser	\f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+	addq.l	#\s,%sp@(FPS_PC+4)
+.endm
+
+.macro	fp_get_instr_word	dest,label,addr
+	fp_get_instr_data	w,2,\dest,\label,\addr
+.endm
+
+.macro	fp_get_instr_long	dest,label,addr
+	fp_get_instr_data	l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro	getuser	size,src,dest,label,addr
+|	printf	,"[\size<%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+
+	.section .fixup,"ax"
+	.even
+.Lu2\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu2\@
+	.previous
+.endm
+
+.macro	putuser	size,src,dest,label,addr
+|	printf	,"[\size>%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+.Lu2\@:
+
+	.section .fixup,"ax"
+	.even
+.Lu3\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu3\@
+	.long	.Lu2\@,.Lu3\@
+	.previous
+.endm
+
+
+.macro	movestack	nr,arg1,arg2,arg3,arg4,arg5
+	.if	\nr
+	movestack	(\nr-1),\arg2,\arg3,\arg4,\arg5
+	move.l	\arg1,-(%sp)
+	.endif
+.endm
+
+.macro	printf	bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+	.data
+.Lpdata\@:
+	.string	"\string"
+	.previous
+
+	movem.l	%d0/%d1/%a0/%a1,-(%sp)
+	.if	\bit+1
+#if 0
+	moveq	#\bit,%d0
+	andw	#7,%d0
+	btst	%d0,fp_debugprint+((31-\bit)/8)
+#else
+	btst	#\bit,fp_debugprint+((31-\bit)/8)
+#endif
+	jeq	.Lpskip\@
+	.endif
+	movestack	\nr,\arg1,\arg2,\arg3,\arg4,\arg5
+	pea	.Lpdata\@
+	jsr	printk
+	lea	((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+	movem.l	(%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro	printx	bit,fp
+#ifdef FPU_EMU_DEBUG
+	movem.l	%d0/%a0,-(%sp)
+	lea	\fp,%a0
+#if 0
+	moveq	#'+',%d0
+	tst.w	(%a0)
+	jeq	.Lx1\@
+	moveq	#'-',%d0
+.Lx1\@:	printf	\bit," %c",1,%d0
+	move.l	(4,%a0),%d0
+	bclr	#31,%d0
+	jne	.Lx2\@
+	printf	\bit,"0."
+	jra	.Lx3\@
+.Lx2\@:	printf	\bit,"1."
+.Lx3\@:	printf	\bit,"%08x%08x",2,%d0,%a0@(8)
+	move.w	(2,%a0),%d0
+	ext.l	%d0
+	printf	\bit,"E%04x",1,%d0
+#else
+	printf	\bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+	movem.l	(%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro	debug	instr,args
+#ifdef FPU_EMU_DEBUG
+	\instr	\args
+#endif
+.endm
+
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_FRV_MATH_EMU_H */
+
diff --git a/arch/frv/include/asm/mb-regs.h b/arch/frv/include/asm/mb-regs.h
new file mode 100644
index 00000000..219e5f92
--- /dev/null
+++ b/arch/frv/include/asm/mb-regs.h
@@ -0,0 +1,200 @@
+/* mb-regs.h: motherboard registers
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB_REGS_H
+#define _ASM_MB_REGS_H
+
+#include <asm/cpu-irqs.h>
+#include <asm/sections.h>
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/* gcc builtins, annotated */
+
+unsigned long __builtin_read8(volatile void __iomem *);
+unsigned long __builtin_read16(volatile void __iomem *);
+unsigned long __builtin_read32(volatile void __iomem *);
+void __builtin_write8(volatile void __iomem *, unsigned char);
+void __builtin_write16(volatile void __iomem *, unsigned short);
+void __builtin_write32(volatile void __iomem *, unsigned long);
+#endif
+
+#define __region_IO	KERNEL_IO_START	/* the region from 0xe0000000 to 0xffffffff has suitable
+					 * protection laid over the top for use in memory-mapped
+					 * I/O
+					 */
+
+#define __region_CS0	0xff000000	/* Boot ROMs area */
+
+#ifdef CONFIG_MB93091_VDK
+/*
+ * VDK motherboard and CPU card specific stuff
+ */
+
+#include <asm/mb93091-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0	IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1	IRQ_CPU_EXTERNAL1
+
+#define __region_CS2	0xe0000000	/* SLBUS/PCI I/O space */
+#define __region_CS2_M		0x0fffffff /* mask */
+#define __region_CS2_C		0x00000000 /* control */
+#define __region_CS5	0xf0000000	/* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M		0x00ffffff
+#define __region_CS5_C		0x00010000
+#define __region_CS7	0xf1000000	/* CB70 CPU-card PCMCIA port I/O space */
+#define __region_CS7_M		0x00ffffff
+#define __region_CS7_C		0x00410701
+#define __region_CS1	0xfc000000	/* SLBUS/PCI bridge control registers */
+#define __region_CS1_M		0x000fffff
+#define __region_CS1_C		0x00000000
+#define __region_CS6	0xfc100000	/* CB70 CPU-card DM9000 LAN I/O space */
+#define __region_CS6_M		0x000fffff
+#define __region_CS6_C		0x00400707
+#define __region_CS3	0xfc200000	/* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M		0x000fffff
+#define __region_CS3_C		0xc8100000
+#define __region_CS4	0xfd000000	/* CB70 CPU-card extra flash space */
+#define __region_CS4_M		0x00ffffff
+#define __region_CS4_C		0x00000f07
+
+#define __region_PCI_IO		(__region_CS2 + 0x04000000UL)
+#define __region_PCI_MEM	(__region_CS2 + 0x08000000UL)
+#define __flush_PCI_writes()						\
+do {									\
+	__builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0);	\
+} while(0)
+
+#define __is_PCI_IO(addr) \
+	(((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24)  < (0x04000000UL >> 24))
+
+#define __is_PCI_MEM(addr) \
+	((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL)
+
+#define __is_PCI_addr(addr) \
+	((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL)
+
+#define __get_CLKSW()	({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; })
+#define __get_CLKIN()	(__get_CLKSW() * 125U * 100000U / 24U)
+
+#ifndef __ASSEMBLY__
+extern int __nongprelbss mb93090_mb00_detected;
+#endif
+
+#define __addr_LEDS()		(__region_CS2 + 0x01200004UL)
+#ifdef CONFIG_MB93090_MB00
+#define __set_LEDS(X)							\
+do {									\
+	if (mb93090_mb00_detected)					\
+		__builtin_write32((void __iomem *) __addr_LEDS(), ~(X));	\
+} while (0)
+#else
+#define __set_LEDS(X)
+#endif
+
+#define __addr_LCD()		(__region_CS2 + 0x01200008UL)
+#define __get_LCD(B)		__builtin_read32((volatile void __iomem *) (B))
+#define __set_LCD(B,X)		__builtin_write32((volatile void __iomem *) (B), (X))
+
+#define LCD_D			0x000000ff		/* LCD data bus */
+#define LCD_RW			0x00000100		/* LCD R/W signal */
+#define LCD_RS			0x00000200		/* LCD Register Select */
+#define LCD_E			0x00000400		/* LCD Start Enable Signal */
+
+#define LCD_CMD_CLEAR		(LCD_E|0x001)
+#define LCD_CMD_HOME		(LCD_E|0x002)
+#define LCD_CMD_CURSOR_INC	(LCD_E|0x004)
+#define LCD_CMD_SCROLL_INC	(LCD_E|0x005)
+#define LCD_CMD_CURSOR_DEC	(LCD_E|0x006)
+#define LCD_CMD_SCROLL_DEC	(LCD_E|0x007)
+#define LCD_CMD_OFF		(LCD_E|0x008)
+#define LCD_CMD_ON(CRSR,BLINK)	(LCD_E|0x00c|(CRSR<<1)|BLINK)
+#define LCD_CMD_CURSOR_MOVE_L	(LCD_E|0x010)
+#define LCD_CMD_CURSOR_MOVE_R	(LCD_E|0x014)
+#define LCD_CMD_DISPLAY_SHIFT_L	(LCD_E|0x018)
+#define LCD_CMD_DISPLAY_SHIFT_R	(LCD_E|0x01c)
+#define LCD_CMD_FUNCSET(DL,N,F)	(LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2))
+#define LCD_CMD_SET_CG_ADDR(X)	(LCD_E|0x040|X)
+#define LCD_CMD_SET_DD_ADDR(X)	(LCD_E|0x080|X)
+#define LCD_CMD_READ_BUSY	(LCD_E|LCD_RW)
+#define LCD_DATA_WRITE(X)	(LCD_E|LCD_RS|(X))
+#define LCD_DATA_READ		(LCD_E|LCD_RS|LCD_RW)
+
+#else
+/*
+ * PDK unit specific stuff
+ */
+
+#include <asm/mb93093-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0	IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1	IRQ_CPU_EXTERNAL1
+
+#define __region_CS5	0xf0000000	/* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M		0x00ffffff /* mask */
+#define __region_CS5_C		0x00010000 /* control */
+#define __region_CS2	0x20000000	/* FPGA registers */
+#define __region_CS2_M		0x000fffff
+#define __region_CS2_C		0x00000000
+#define __region_CS1	0xfc100000	/* LAN registers */
+#define __region_CS1_M		0x000fffff
+#define __region_CS1_C		0x00010404
+#define __region_CS3	0xfc200000	/* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M		0x000fffff
+#define __region_CS3_C		0xc8000000
+#define __region_CS4	0xfd000000	/* extra ROMs area */
+#define __region_CS4_M		0x00ffffff
+#define __region_CS4_C		0x00000f07
+
+#define __region_CS6	0xfe000000	/* not used - hide behind CPU resource I/O regs */
+#define __region_CS6_M		0x000fffff
+#define __region_CS6_C		0x00000f07
+#define __region_CS7	0xfe000000	/* not used - hide behind CPU resource I/O regs */
+#define __region_CS7_M		0x000fffff
+#define __region_CS7_C		0x00000f07
+
+#define __is_PCI_IO(addr)	0	/* no PCI */
+#define __is_PCI_MEM(addr)	0
+#define __is_PCI_addr(addr)	0
+#define __region_PCI_IO		0
+#define __region_PCI_MEM	0
+#define __flush_PCI_writes()	do { } while(0)
+
+#define __get_CLKSW()		0UL
+#define __get_CLKIN()		66000000UL
+
+#define __addr_LEDS()		(__region_CS2 + 0x00000023UL)
+#define __set_LEDS(X)		__builtin_write8((volatile void __iomem *) __addr_LEDS(), (X))
+
+#define __addr_FPGATR()		(__region_CS2 + 0x00000030UL)
+#define __set_FPGATR(X)		__builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X))
+#define __get_FPGATR()		__builtin_read32((volatile void __iomem *) __addr_FPGATR())
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK	0x00000003
+
+#define __set_FPGATR_AUDIO_CLK(V) \
+	__set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V))
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF	0x0
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz	0x1
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz	0x2
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz	0x3
+
+#define MB93093_FPGA_SWR_PUSHSWMASK	(0x1F<<26)
+#define MB93093_FPGA_SWR_PUSHSW4	(1<<29)
+
+#define __addr_FPGA_SWR		((volatile void __iomem *)(__region_CS2 + 0x28UL))
+#define __get_FPGA_PUSHSW1_5()	(__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK)
+
+
+#endif
+
+#endif /* _ASM_MB_REGS_H */
diff --git a/arch/frv/include/asm/mb86943a.h b/arch/frv/include/asm/mb86943a.h
new file mode 100644
index 00000000..e87ef924
--- /dev/null
+++ b/arch/frv/include/asm/mb86943a.h
@@ -0,0 +1,42 @@
+/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB86943A_H
+#define _ASM_MB86943A_H
+
+#include <asm/mb-regs.h>
+
+#define __reg_MB86943_sl_ctl		*(volatile uint32_t *) (__region_CS1 + 0x00)
+
+#define MB86943_SL_CTL_BUS_WIDTH_64	0x00000001
+#define MB86943_SL_CTL_AS_HOST		0x00000002
+#define MB86943_SL_CTL_DRCT_MASTER_SWAP	0x00000004
+#define MB86943_SL_CTL_DRCT_SLAVE_SWAP	0x00000008
+#define MB86943_SL_CTL_PCI_CONFIG_SWAP	0x00000010
+#define MB86943_SL_CTL_ECS0_ENABLE	0x00000020
+#define MB86943_SL_CTL_ECS1_ENABLE	0x00000040
+#define MB86943_SL_CTL_ECS2_ENABLE	0x00000080
+
+#define __reg_MB86943_ecs_ctl(N)	*(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N)))
+#define __reg_MB86943_ecs_range(N)	*(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N)))
+#define __reg_MB86943_ecs_base(N)	*(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N)))
+
+#define __reg_MB86943_sl_pci_io_range	*(volatile uint32_t *) (__region_CS1 + 0x50)
+#define __reg_MB86943_sl_pci_io_base	*(volatile uint32_t *) (__region_CS1 + 0x58)
+#define __reg_MB86943_sl_pci_mem_range	*(volatile uint32_t *) (__region_CS1 + 0x60)
+#define __reg_MB86943_sl_pci_mem_base	*(volatile uint32_t *) (__region_CS1 + 0x68)
+#define __reg_MB86943_pci_sl_io_base	*(volatile uint32_t *) (__region_CS1 + 0x70)
+#define __reg_MB86943_pci_sl_mem_base	*(volatile uint32_t *) (__region_CS1 + 0x78)
+
+#define __reg_MB86943_pci_arbiter	*(volatile uint32_t *) (__region_CS2 + 0x01300014)
+#define MB86943_PCIARB_EN		0x00000001
+
+#endif /* _ASM_MB86943A_H */
diff --git a/arch/frv/include/asm/mb93091-fpga-irqs.h b/arch/frv/include/asm/mb93091-fpga-irqs.h
new file mode 100644
index 00000000..19778c5b
--- /dev/null
+++ b/arch/frv/include/asm/mb93091-fpga-irqs.h
@@ -0,0 +1,42 @@
+/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93091_FPGA_IRQS_H
+#define _ASM_MB93091_FPGA_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_FPGA__UNUSED			= IRQ_BASE_FPGA,
+	IRQ_FPGA_SYSINT_BUS_EXPANSION_1,
+	IRQ_FPGA_SL_BUS_EXPANSION_2,
+	IRQ_FPGA_PCI_INTD,
+	IRQ_FPGA_PCI_INTC,
+	IRQ_FPGA_PCI_INTB,
+	IRQ_FPGA_PCI_INTA,
+	IRQ_FPGA_SL_BUS_EXPANSION_7,
+	IRQ_FPGA_SYSINT_BUS_EXPANSION_8,
+	IRQ_FPGA_SL_BUS_EXPANSION_9,
+	IRQ_FPGA_MB86943_PCI_INTA,
+	IRQ_FPGA_MB86943_SLBUS_SIDE,
+	IRQ_FPGA_RTL8029_INTA,
+	IRQ_FPGA_SYSINT_BUS_EXPANSION_13,
+	IRQ_FPGA_SL_BUS_EXPANSION_14,
+	IRQ_FPGA_NMI,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93091_FPGA_IRQS_H */
diff --git a/arch/frv/include/asm/mb93093-fpga-irqs.h b/arch/frv/include/asm/mb93093-fpga-irqs.h
new file mode 100644
index 00000000..590266b1
--- /dev/null
+++ b/arch/frv/include/asm/mb93093-fpga-irqs.h
@@ -0,0 +1,29 @@
+/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93093_FPGA_IRQS_H
+#define _ASM_MB93093_FPGA_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_FPGA_PUSH_BUTTON_SW1_5		= IRQ_BASE_FPGA + 8,
+	IRQ_FPGA_ROCKER_C_SW8			= IRQ_BASE_FPGA + 9,
+	IRQ_FPGA_ROCKER_C_SW9			= IRQ_BASE_FPGA + 10,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93093_FPGA_IRQS_H */
diff --git a/arch/frv/include/asm/mb93493-irqs.h b/arch/frv/include/asm/mb93493-irqs.h
new file mode 100644
index 00000000..82c7aedd
--- /dev/null
+++ b/arch/frv/include/asm/mb93493-irqs.h
@@ -0,0 +1,50 @@
+/* mb93493-irqs.h: MB93493 companion chip IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_IRQS_H
+#define _ASM_MB93493_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_MB93493_VDC			= IRQ_BASE_MB93493 + 0,
+	IRQ_MB93493_VCC			= IRQ_BASE_MB93493 + 1,
+	IRQ_MB93493_AUDIO_OUT		= IRQ_BASE_MB93493 + 2,
+	IRQ_MB93493_I2C_0		= IRQ_BASE_MB93493 + 3,
+	IRQ_MB93493_I2C_1		= IRQ_BASE_MB93493 + 4,
+	IRQ_MB93493_USB			= IRQ_BASE_MB93493 + 5,
+	IRQ_MB93493_LOCAL_BUS		= IRQ_BASE_MB93493 + 7,
+	IRQ_MB93493_PCMCIA		= IRQ_BASE_MB93493 + 8,
+	IRQ_MB93493_GPIO		= IRQ_BASE_MB93493 + 9,
+	IRQ_MB93493_AUDIO_IN		= IRQ_BASE_MB93493 + 10,
+};
+
+/* IRQ multiplexor mappings */
+#define ROUTE_VIA_IRQ0	0	/* route IRQ by way of CPU external IRQ 0 */
+#define ROUTE_VIA_IRQ1	1	/* route IRQ by way of CPU external IRQ 1 */
+
+#define IRQ_MB93493_VDC_ROUTE		ROUTE_VIA_IRQ0
+#define IRQ_MB93493_VCC_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_OUT_ROUTE	ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_0_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_1_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_USB_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_LOCAL_BUS_ROUTE	ROUTE_VIA_IRQ1
+#define IRQ_MB93493_PCMCIA_ROUTE	ROUTE_VIA_IRQ1
+#define IRQ_MB93493_GPIO_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_IN_ROUTE	ROUTE_VIA_IRQ1
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93493_IRQS_H */
diff --git a/arch/frv/include/asm/mb93493-regs.h b/arch/frv/include/asm/mb93493-regs.h
new file mode 100644
index 00000000..8a1f6aac
--- /dev/null
+++ b/arch/frv/include/asm/mb93493-regs.h
@@ -0,0 +1,281 @@
+/* mb93493-regs.h: MB93493 companion chip registers
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_REGS_H
+#define _ASM_MB93493_REGS_H
+
+#include <asm/mb-regs.h>
+#include <asm/mb93493-irqs.h>
+
+#define __addr_MB93493(X)	((volatile unsigned long *)(__region_CS3 + (X)))
+#define __get_MB93493(X)	({ *(volatile unsigned long *)(__region_CS3 + (X)); })
+
+#define __set_MB93493(X,V)						\
+do {									\
+	*(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb();	\
+} while(0)
+
+#define __get_MB93493_STSR(X)	__get_MB93493(0x3c0 + (X) * 4)
+#define __set_MB93493_STSR(X,V)	__set_MB93493(0x3c0 + (X) * 4, (V))
+#define MB93493_STSR_EN
+
+#define __addr_MB93493_IQSR(X)	__addr_MB93493(0x3d0 + (X) * 4)
+#define __get_MB93493_IQSR(X)	__get_MB93493(0x3d0 + (X) * 4)
+#define __set_MB93493_IQSR(X,V)	__set_MB93493(0x3d0 + (X) * 4, (V))
+
+#define __get_MB93493_DQSR(X)	__get_MB93493(0x3e0 + (X) * 4)
+#define __set_MB93493_DQSR(X,V)	__set_MB93493(0x3e0 + (X) * 4, (V))
+
+#define __get_MB93493_LBSER()	__get_MB93493(0x3f0)
+#define __set_MB93493_LBSER(V)	__set_MB93493(0x3f0, (V))
+
+#define MB93493_LBSER_VDC	0x00010000
+#define MB93493_LBSER_VCC	0x00020000
+#define MB93493_LBSER_AUDIO	0x00040000
+#define MB93493_LBSER_I2C_0	0x00080000
+#define MB93493_LBSER_I2C_1	0x00100000
+#define MB93493_LBSER_USB	0x00200000
+#define MB93493_LBSER_GPIO	0x00800000
+#define MB93493_LBSER_PCMCIA	0x01000000
+
+#define __get_MB93493_LBSR()	__get_MB93493(0x3fc)
+#define __set_MB93493_LBSR(V)	__set_MB93493(0x3fc, (V))
+
+/*
+ * video display controller
+ */
+#define __get_MB93493_VDC(X)	__get_MB93493(MB93493_VDC_##X)
+#define __set_MB93493_VDC(X,V)	__set_MB93493(MB93493_VDC_##X, (V))
+
+#define MB93493_VDC_RCURSOR	0x140	/* cursor position */
+#define MB93493_VDC_RCT1	0x144	/* cursor colour 1 */
+#define MB93493_VDC_RCT2	0x148	/* cursor colour 2 */
+#define MB93493_VDC_RHDC	0x150	/* horizontal display period */
+#define MB93493_VDC_RH_MARGINS	0x154	/* horizontal margin sizes */
+#define MB93493_VDC_RVDC	0x158	/* vertical display period */
+#define MB93493_VDC_RV_MARGINS	0x15c	/* vertical margin sizes */
+#define MB93493_VDC_RC		0x170	/* VDC control */
+#define MB93493_VDC_RCLOCK	0x174	/* clock divider, DMA req delay */
+#define MB93493_VDC_RBLACK	0x178	/* black insert sizes */
+#define MB93493_VDC_RS		0x17c	/* VDC status */
+
+#define __addr_MB93493_VDC_BCI(X)  ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); })
+#define __addr_MB93493_VDC_TPO(X)  (__region_CS3 + 0x1c0 + (X))
+
+#define VDC_TPO_WIDTH		32
+
+#define VDC_RC_DSR		0x00000080	/* VDC master reset */
+
+#define VDC_RS_IT		0x00060000	/* interrupt indicators */
+#define VDC_RS_IT_UNDERFLOW	0x00040000	/* - underflow event */
+#define VDC_RS_IT_VSYNC		0x00020000	/* - VSYNC event */
+#define VDC_RS_DFI		0x00010000	/* current interlace field number */
+#define VDC_RS_DFI_TOP		0x00000000	/* - top field */
+#define VDC_RS_DFI_BOTTOM	0x00010000	/* - bottom field */
+#define VDC_RS_DCSR		0x00000010	/* cursor state */
+#define VDC_RS_DCM		0x00000003	/* display mode */
+#define VDC_RS_DCM_DISABLED	0x00000000	/* - display disabled */
+#define VDC_RS_DCM_STOPPED	0x00000001	/* - VDC stopped */
+#define VDC_RS_DCM_FREERUNNING	0x00000002	/* - VDC free-running */
+#define VDC_RS_DCM_TRANSFERRING	0x00000003	/* - data being transferred to VDC */
+
+/*
+ * video capture controller
+ */
+#define __get_MB93493_VCC(X)	__get_MB93493(MB93493_VCC_##X)
+#define __set_MB93493_VCC(X,V)	__set_MB93493(MB93493_VCC_##X, (V))
+
+#define MB93493_VCC_RREDUCT	0x104	/* reduction rate */
+#define MB93493_VCC_RHY		0x108	/* horizontal brightness filter coefficients */
+#define MB93493_VCC_RHC		0x10c	/* horizontal colour-difference filter coefficients */
+#define MB93493_VCC_RHSIZE	0x110	/* horizontal cycle sizes */
+#define MB93493_VCC_RHBC	0x114	/* horizontal back porch size */
+#define MB93493_VCC_RVCC	0x118	/* vertical capture period */
+#define MB93493_VCC_RVBC	0x11c	/* vertical back porch period */
+#define MB93493_VCC_RV		0x120	/* vertical filter coefficients */
+#define MB93493_VCC_RDTS	0x128	/* DMA transfer size */
+#define MB93493_VCC_RDTS_4B	0x01000000	/* 4-byte transfer */
+#define MB93493_VCC_RDTS_32B	0x03000000	/* 32-byte transfer */
+#define MB93493_VCC_RDTS_SHIFT	24
+#define MB93493_VCC_RCC		0x130	/* VCC control */
+#define MB93493_VCC_RIS		0x134	/* VCC interrupt status */
+
+#define __addr_MB93493_VCC_TPI(X)  (__region_CS3 + 0x180 + (X))
+
+#define VCC_RHSIZE_RHCC		0x000007ff
+#define VCC_RHSIZE_RHCC_SHIFT	0
+#define VCC_RHSIZE_RHTCC	0x0fff0000
+#define VCC_RHSIZE_RHTCC_SHIFT	16
+
+#define VCC_RVBC_RVBC		0x00003f00
+#define VCC_RVBC_RVBC_SHIFT	8
+
+#define VCC_RREDUCT_RHR		0x07ff0000
+#define VCC_RREDUCT_RHR_SHIFT	16
+#define VCC_RREDUCT_RVR		0x000007ff
+#define VCC_RREDUCT_RVR_SHIFT	0
+
+#define VCC_RCC_CE		0x00000001	/* VCC enable */
+#define VCC_RCC_CS		0x00000002	/* request video capture start */
+#define VCC_RCC_CPF		0x0000000c	/* pixel format */
+#define VCC_RCC_CPF_YCBCR_16	0x00000000	/* - YCbCr 4:2:2 16-bit format */
+#define VCC_RCC_CPF_RGB		0x00000004	/* - RGB 4:4:4 format */
+#define VCC_RCC_CPF_YCBCR_24	0x00000008	/* - YCbCr 4:2:2 24-bit format */
+#define VCC_RCC_CPF_BT656	0x0000000c	/* - ITU R-BT.656 format */
+#define VCC_RCC_CPF_SHIFT	2
+#define VCC_RCC_CSR		0x00000080	/* request reset */
+#define VCC_RCC_HSIP		0x00000100	/* HSYNC polarity */
+#define VCC_RCC_HSIP_LOACT	0x00000000	/* - low active */
+#define VCC_RCC_HSIP_HIACT	0x00000100	/* - high active */
+#define VCC_RCC_VSIP		0x00000200	/* VSYNC polarity */
+#define VCC_RCC_VSIP_LOACT	0x00000000	/* - low active */
+#define VCC_RCC_VSIP_HIACT	0x00000200	/* - high active */
+#define VCC_RCC_CIE		0x00000800	/* interrupt enable */
+#define VCC_RCC_CFP		0x00001000	/* RGB pixel packing */
+#define VCC_RCC_CFP_4TO3	0x00000000	/* - pack 4 pixels into 3 words */
+#define VCC_RCC_CFP_1TO1	0x00001000	/* - pack 1 pixel into 1 words */
+#define VCC_RCC_CSM		0x00006000	/* interlace specification */
+#define VCC_RCC_CSM_ONEPASS	0x00002000	/* - non-interlaced */
+#define VCC_RCC_CSM_INTERLACE	0x00004000	/* - interlaced */
+#define VCC_RCC_CSM_SHIFT	13
+#define VCC_RCC_ES		0x00008000	/* capture start polarity */
+#define VCC_RCC_ES_NEG		0x00000000	/* - negative edge */
+#define VCC_RCC_ES_POS		0x00008000	/* - positive edge */
+#define VCC_RCC_IFI		0x00080000	/* inferlace field evaluation reverse */
+#define VCC_RCC_FDTS		0x00300000	/* interlace field start */
+#define VCC_RCC_FDTS_3_8	0x00000000	/* - 3/8 of horizontal entire cycle */
+#define VCC_RCC_FDTS_1_4	0x00100000	/* - 1/4 of horizontal entire cycle */
+#define VCC_RCC_FDTS_7_16	0x00200000	/* - 7/16 of horizontal entire cycle */
+#define VCC_RCC_FDTS_SHIFT	20
+#define VCC_RCC_MOV		0x00400000	/* test bit - always set to 1 */
+#define VCC_RCC_STP		0x00800000	/* request video capture stop */
+#define VCC_RCC_TO		0x01000000	/* input during top-field only */
+
+#define VCC_RIS_VSYNC		0x01000000	/* VSYNC interrupt */
+#define VCC_RIS_OV		0x02000000	/* overflow interrupt */
+#define VCC_RIS_BOTTOM		0x08000000	/* interlace bottom field */
+#define VCC_RIS_STARTED		0x10000000	/* capture started */
+
+/*
+ * I2C
+ */
+#define MB93493_I2C_BSR 	0x340		/* bus status */
+#define MB93493_I2C_BCR		0x344		/* bus control */
+#define MB93493_I2C_CCR		0x348		/* clock control */
+#define MB93493_I2C_ADR		0x34c		/* address */
+#define MB93493_I2C_DTR		0x350		/* data */
+#define MB93493_I2C_BC2R	0x35c		/* bus control 2 */
+
+#define __addr_MB93493_I2C(port,X)   (__region_CS3 + MB93493_I2C_##X + ((port)*0x20))
+#define __get_MB93493_I2C(port,X)    __get_MB93493(MB93493_I2C_##X + ((port)*0x20))
+#define __set_MB93493_I2C(port,X,V)  __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V))
+
+#define I2C_BSR_BB	(1 << 7)
+
+/*
+ * audio controller (I2S) registers
+ */
+#define __get_MB93493_I2S(X)	__get_MB93493(MB93493_I2S_##X)
+#define __set_MB93493_I2S(X,V)	__set_MB93493(MB93493_I2S_##X, (V))
+
+#define MB93493_I2S_ALDR	0x300		/* L-channel data */
+#define MB93493_I2S_ARDR	0x304		/* R-channel data */
+#define MB93493_I2S_APDR	0x308		/* 16-bit packed data */
+#define MB93493_I2S_AISTR	0x310		/* status */
+#define MB93493_I2S_AICR	0x314		/* control */
+
+#define __addr_MB93493_I2S_ALDR(X)	(__region_CS3 + MB93493_I2S_ALDR + (X))
+#define __addr_MB93493_I2S_ARDR(X)	(__region_CS3 + MB93493_I2S_ARDR + (X))
+#define __addr_MB93493_I2S_APDR(X)	(__region_CS3 + MB93493_I2S_APDR + (X))
+#define __addr_MB93493_I2S_ADR(X)	(__region_CS3 + 0x320 + (X))
+
+#define I2S_AISTR_OTST		0x00000003	/* status of output data transfer */
+#define I2S_AISTR_OTR		0x00000010	/* output transfer request pending */
+#define I2S_AISTR_OUR		0x00000020	/* output FIFO underrun detected */
+#define I2S_AISTR_OOR		0x00000040	/* output FIFO overrun detected */
+#define I2S_AISTR_ODS		0x00000100	/* output DMA transfer size */
+#define I2S_AISTR_ODE		0x00000400	/* output DMA transfer request enable */
+#define I2S_AISTR_OTRIE		0x00001000	/* output transfer request interrupt enable */
+#define I2S_AISTR_OURIE		0x00002000	/* output FIFO underrun interrupt enable */
+#define I2S_AISTR_OORIE		0x00004000	/* output FIFO overrun interrupt enable */
+#define I2S_AISTR__OUT_MASK	0x00007570
+#define I2S_AISTR_ITST		0x00030000	/* status of input data transfer */
+#define I2S_AISTR_ITST_SHIFT	16
+#define I2S_AISTR_ITR		0x00100000	/* input transfer request pending */
+#define I2S_AISTR_IUR		0x00200000	/* input FIFO underrun detected */
+#define I2S_AISTR_IOR		0x00400000	/* input FIFO overrun detected */
+#define I2S_AISTR_IDS		0x01000000	/* input DMA transfer size */
+#define I2S_AISTR_IDE		0x04000000	/* input DMA transfer request enable */
+#define I2S_AISTR_ITRIE		0x10000000	/* input transfer request interrupt enable */
+#define I2S_AISTR_IURIE		0x20000000	/* input FIFO underrun interrupt enable */
+#define I2S_AISTR_IORIE		0x40000000	/* input FIFO overrun interrupt enable */
+#define I2S_AISTR__IN_MASK	0x75700000
+
+#define I2S_AICR_MI		0x00000001	/* mono input requested */
+#define I2S_AICR_AMI		0x00000002	/* relation between LRCKI/FS1 and SDI */
+#define I2S_AICR_LRI		0x00000004	/* function of LRCKI pin */
+#define I2S_AICR_SDMI		0x00000070	/* format of input audio data */
+#define I2S_AICR_SDMI_SHIFT	4
+#define I2S_AICR_CLI		0x00000080	/* input FIFO clearing control */
+#define I2S_AICR_IM		0x00000300	/* input state control */
+#define I2S_AICR_IM_SHIFT	8
+#define I2S_AICR__IN_MASK	0x000003f7
+#define I2S_AICR_MO		0x00001000	/* mono output requested */
+#define I2S_AICR_AMO		0x00002000	/* relation between LRCKO/FS0 and SDO */
+#define I2S_AICR_AMO_SHIFT	13
+#define I2S_AICR_LRO		0x00004000	/* function of LRCKO pin */
+#define I2S_AICR_SDMO		0x00070000	/* format of output audio data */
+#define I2S_AICR_SDMO_SHIFT	16
+#define I2S_AICR_CLO		0x00080000	/* output FIFO clearing control */
+#define I2S_AICR_OM		0x00100000	/* output state control */
+#define I2S_AICR__OUT_MASK	0x001f7000
+#define I2S_AICR_DIV		0x03000000	/* frequency division rate */
+#define I2S_AICR_DIV_SHIFT	24
+#define I2S_AICR_FL		0x20000000	/* frame length */
+#define I2S_AICR_FS		0x40000000	/* frame sync method */
+#define I2S_AICR_ME		0x80000000	/* master enable */
+
+/*
+ * PCMCIA
+ */
+#define __addr_MB93493_PCMCIA(X)  ((volatile unsigned long *)(__region_CS5 + (X)))
+
+/*
+ * GPIO
+ */
+#define __get_MB93493_GPIO_PDR(X)	__get_MB93493(0x380 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDR(X,V)	__set_MB93493(0x380 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_GPDR(X)	__get_MB93493(0x384 + (X) * 0xc0)
+#define __set_MB93493_GPIO_GPDR(X,V)	__set_MB93493(0x384 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SIR(X)	__get_MB93493(0x388 + (X) * 0xc0)
+#define __set_MB93493_GPIO_SIR(X,V)	__set_MB93493(0x388 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SOR(X)	__get_MB93493(0x38c + (X) * 0xc0)
+#define __set_MB93493_GPIO_SOR(X,V)	__set_MB93493(0x38c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDSR(X)	__get_MB93493(0x390 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDSR(X,V)	__set_MB93493(0x390 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDCR(X)	__get_MB93493(0x394 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDCR(X,V)	__set_MB93493(0x394 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_INTST(X)	__get_MB93493(0x398 + (X) * 0xc0)
+#define __set_MB93493_GPIO_INTST(X,V)	__set_MB93493(0x398 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IEHL(X)	__get_MB93493(0x39c + (X) * 0xc0)
+#define __set_MB93493_GPIO_IEHL(X,V)	__set_MB93493(0x39c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IELH(X)	__get_MB93493(0x3a0 + (X) * 0xc0)
+#define __set_MB93493_GPIO_IELH(X,V)	__set_MB93493(0x3a0 + (X) * 0xc0, (V))
+
+#endif /* _ASM_MB93493_REGS_H */
diff --git a/arch/frv/include/asm/mc146818rtc.h b/arch/frv/include/asm/mc146818rtc.h
new file mode 100644
index 00000000..90dfb7a6
--- /dev/null
+++ b/arch/frv/include/asm/mc146818rtc.h
@@ -0,0 +1,16 @@
+/* mc146818rtc.h: RTC defs
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h
new file mode 100644
index 00000000..e9a0ec85
--- /dev/null
+++ b/arch/frv/include/asm/mem-layout.h
@@ -0,0 +1,86 @@
+/* mem-layout.h: memory layout
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MEM_LAYOUT_H
+#define _ASM_MEM_LAYOUT_H
+
+#ifndef __ASSEMBLY__
+#define __UL(X)	((unsigned long) (X))
+#else
+#define __UL(X)	(X)
+#endif
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#define PAGE_SHIFT			14
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE			(1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE			(1 << PAGE_SHIFT)
+#endif
+
+#define PAGE_MASK			(~(PAGE_SIZE-1))
+
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define	ARCH_DMA_MINALIGN		L1_CACHE_BYTES
+#define	ARCH_SLAB_MINALIGN		L1_CACHE_BYTES
+
+/*****************************************************************************/
+/*
+ * virtual memory layout from kernel's point of view
+ */
+#define PAGE_OFFSET			((unsigned long) &__page_offset)
+
+#ifdef CONFIG_MMU
+
+/* see Documentation/frv/mmu-layout.txt */
+#define KERNEL_LOWMEM_START		__UL(0xc0000000)
+#define KERNEL_LOWMEM_END		__UL(0xd0000000)
+#define VMALLOC_START			__UL(0xd0000000)
+#define VMALLOC_END			__UL(0xd8000000)
+#define PKMAP_BASE			__UL(0xd8000000)
+#define PKMAP_END			__UL(0xdc000000)
+#define KMAP_ATOMIC_SECONDARY_FRAME	__UL(0xdc000000)
+#define KMAP_ATOMIC_PRIMARY_FRAME	__UL(0xdd000000)
+
+#endif
+
+#define KERNEL_IO_START			__UL(0xe0000000)
+
+
+/*****************************************************************************/
+/*
+ * memory layout from userspace's point of view
+ */
+#define BRK_BASE			__UL(2 * 1024 * 1024 + PAGE_SIZE)
+#define STACK_TOP			__UL(2 * 1024 * 1024)
+#define STACK_TOP_MAX			__UL(0xc0000000)
+
+/* userspace process size */
+#ifdef CONFIG_MMU
+#define TASK_SIZE			(PAGE_OFFSET)
+#else
+#define TASK_SIZE			__UL(0xFFFFFFFFUL)
+#endif
+
+/* base of area at which unspecified mmaps will start */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+#define TASK_UNMAPPED_BASE		__UL(16 * 1024 * 1024)
+#else
+#define TASK_UNMAPPED_BASE		__UL(TASK_SIZE / 3)
+#endif
+
+#endif /* _ASM_MEM_LAYOUT_H */
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h
new file mode 100644
index 00000000..8eebf89f
--- /dev/null
+++ b/arch/frv/include/asm/mman.h
@@ -0,0 +1 @@
+#include <asm-generic/mman.h>
diff --git a/arch/frv/include/asm/mmu.h b/arch/frv/include/asm/mmu.h
new file mode 100644
index 00000000..86ca0e86
--- /dev/null
+++ b/arch/frv/include/asm/mmu.h
@@ -0,0 +1,41 @@
+/* mmu.h: memory management context for FR-V with or without MMU support
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+typedef struct {
+#ifdef CONFIG_MMU
+	struct list_head id_link;		/* link in list of context ID owners */
+	unsigned short	id;			/* MMU context ID */
+	unsigned short	id_busy;		/* true if ID is in CXNR */
+	unsigned long	itlb_cached_pge;	/* [SCR0] PGE cached for insn TLB handler */
+	unsigned long	itlb_ptd_mapping;	/* [DAMR4] PTD mapping for itlb cached PGE */
+	unsigned long	dtlb_cached_pge;	/* [SCR1] PGE cached for data TLB handler */
+	unsigned long	dtlb_ptd_mapping;	/* [DAMR5] PTD mapping for dtlb cached PGE */
+
+#else
+	unsigned long		end_brk;
+
+#endif
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long	exec_fdpic_loadmap;
+	unsigned long	interp_fdpic_loadmap;
+#endif
+
+} mm_context_t;
+
+#ifdef CONFIG_MMU
+extern int __nongpreldata cxn_pinned;
+extern int cxn_pin_by_pid(pid_t pid);
+#endif
+
+#endif /* _ASM_MMU_H */
diff --git a/arch/frv/include/asm/mmu_context.h b/arch/frv/include/asm/mmu_context.h
new file mode 100644
index 00000000..c7daa395
--- /dev/null
+++ b/arch/frv/include/asm/mmu_context.h
@@ -0,0 +1,50 @@
+/* mmu_context.h: MMU context management routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_MMU
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd);
+extern void destroy_context(struct mm_struct *mm);
+
+#else
+#define init_new_context(tsk, mm)		({ 0; })
+#define change_mm_context(old, ctx, _pml4)	do {} while(0)
+#define destroy_context(mm)			do {} while(0)
+#endif
+
+#define switch_mm(prev, next, tsk)						\
+do {										\
+	if (prev != next)							\
+		change_mm_context(&prev->context, &next->context, next->pgd);	\
+} while(0)
+
+#define activate_mm(prev, next)						\
+do {									\
+	change_mm_context(&prev->context, &next->context, next->pgd);	\
+} while(0)
+
+#define deactivate_mm(tsk, mm)			\
+do {						\
+} while(0)
+
+#endif
diff --git a/arch/frv/include/asm/module.h b/arch/frv/include/asm/module.h
new file mode 100644
index 00000000..3d5c6360
--- /dev/null
+++ b/arch/frv/include/asm/module.h
@@ -0,0 +1,28 @@
+/* module.h: FRV module stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+/*
+ * Include the architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
+
diff --git a/arch/frv/include/asm/msgbuf.h b/arch/frv/include/asm/msgbuf.h
new file mode 100644
index 00000000..97ceb55a
--- /dev/null
+++ b/arch/frv/include/asm/msgbuf.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm	msg_perm;
+	__kernel_time_t		msg_stime;	/* last msgsnd time */
+	unsigned long		__unused1;
+	__kernel_time_t		msg_rtime;	/* last msgrcv time */
+	unsigned long		__unused2;
+	__kernel_time_t		msg_ctime;	/* last change time */
+	unsigned long		__unused3;
+	unsigned long		msg_cbytes;	/* current number of bytes on queue */
+	unsigned long		msg_qnum;	/* number of messages in queue */
+	unsigned long		msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t		msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t		msg_lrpid;	/* last receive pid */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
+
diff --git a/arch/frv/include/asm/mutex.h b/arch/frv/include/asm/mutex.h
new file mode 100644
index 00000000..458c1f7f
--- /dev/null
+++ b/arch/frv/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h
new file mode 100644
index 00000000..8c97068a
--- /dev/null
+++ b/arch/frv/include/asm/page.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <asm/virtconvert.h>
+#include <asm/mem-layout.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)		free_page(addr)
+
+#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+#define copy_page(to,from)			memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg)	memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long	pte;	} pte_t;
+typedef struct { unsigned long	ste[64];} pmd_t;
+typedef struct { pmd_t		pue[1]; } pud_t;
+typedef struct { pud_t		pge[1];	} pgd_t;
+typedef struct { unsigned long	pgprot;	} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).ste[0])
+#define pud_val(x)	((x).pue[0])
+#define pgd_val(x)	((x).pge[0])
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pud(x)	((pud_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+#define PTE_MASK	PAGE_MASK
+
+#define devmem_is_allowed(pfn)	1
+
+#define __pa(vaddr)		virt_to_phys((void *) (unsigned long) (vaddr))
+#define __va(paddr)		phys_to_virt((unsigned long) (paddr))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#ifdef CONFIG_MMU
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#else
+#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/frv/include/asm/param.h b/arch/frv/include/asm/param.h
new file mode 100644
index 00000000..a52dca9a
--- /dev/null
+++ b/arch/frv/include/asm/param.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#define EXEC_PAGESIZE	16384
+
+#include <asm-generic/param.h>
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
new file mode 100644
index 00000000..ef03baf5
--- /dev/null
+++ b/arch/frv/include/asm/pci.h
@@ -0,0 +1,63 @@
+/* pci.h: FR-V specific PCI declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68k/pci.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_FRV_PCI_H
+#define _ASM_FRV_PCI_H
+
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
+
+struct pci_dev;
+
+#define pcibios_assign_all_busses()	0
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern void pcibios_penalize_isa_irq(int irq);
+
+#ifdef CONFIG_MMU
+extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle);
+extern void consistent_free(void *vaddr);
+extern void consistent_sync(void *vaddr, size_t size, int direction);
+extern void consistent_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+#endif
+
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+				  dma_addr_t *dma_handle);
+
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+
+/* Return the index of the PCI controller for device PDEV. */
+#define pci_controller_num(PDEV)	(0)
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+/*
+ *	These are pretty much arbitrary with the CoMEM implementation.
+ *	We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO		0x100
+#define PCIBIOS_MIN_MEM		0x00010000
+
+#endif /* _ASM_FRV_PCI_H */
diff --git a/arch/frv/include/asm/percpu.h b/arch/frv/include/asm/percpu.h
new file mode 100644
index 00000000..2cad3f87
--- /dev/null
+++ b/arch/frv/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif	/* __ASM_PERCPU_H */
diff --git a/arch/frv/include/asm/perf_event.h b/arch/frv/include/asm/perf_event.h
new file mode 100644
index 00000000..c52ea554
--- /dev/null
+++ b/arch/frv/include/asm/perf_event.h
@@ -0,0 +1,15 @@
+/* FRV performance event support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_EVENT_H
+#define _ASM_PERF_EVENT_H
+
+#endif /* _ASM_PERF_EVENT_H */
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
new file mode 100644
index 00000000..416d19a6
--- /dev/null
+++ b/arch/frv/include/asm/pgalloc.h
@@ -0,0 +1,69 @@
+/* pgalloc.h: Page allocation routines for FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *	include/asm-m68knommu/pgalloc.h
+ *	include/asm-i386/pgalloc.h
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+#ifdef CONFIG_MMU
+
+#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE)
+#define pmd_populate(MM, PMD, PAGE)						\
+do {										\
+	__set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE);	\
+} while(0)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte,address)			\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb),(pte));			\
+} while (0)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ * (In the PAE case we free the pmds as part of the pgd.)
+ */
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *) 2); })
+#define pmd_free(mm, x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
new file mode 100644
index 00000000..6bc241e4
--- /dev/null
+++ b/arch/frv/include/asm/pgtable.h
@@ -0,0 +1,544 @@
+/* pgtable.h: FR-V page table mangling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *	include/asm-m68knommu/pgtable.h
+ *	include/asm-i386/pgtable.h
+ */
+
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/mem-layout.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+struct vm_area_struct;
+#endif
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_HIGHPTE)
+typedef unsigned long pte_addr_t;
+#else
+typedef pte_t *pte_addr_t;
+#endif
+#endif
+
+/*****************************************************************************/
+/*
+ * MMU-less operation case first
+ */
+#ifndef CONFIG_MMU
+
+#define pgd_present(pgd)	(1)		/* pages are always present on NO_MM */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *) 0)
+
+#define PAGE_NONE		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_READONLY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)	/* these mean nothing to NO_MM */
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#ifndef __ASSEMBLY__
+static inline int pte_file(pte_t pte) { return 0; }
+#endif
+
+#define ZERO_PAGE(vaddr)	({ BUG(); NULL; })
+
+#define swapper_pg_dir		((pgd_t *) NULL)
+
+#define pgtable_cache_init()		do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
+#else /* !CONFIG_MMU */
+/*****************************************************************************/
+/*
+ * then MMU operation
+ */
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long empty_zero_page;
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
+#endif
+
+/*
+ * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry)
+ * [see Documentation/frv/mmu-layout.txt]
+ *
+ * Page Directory:
+ *  - Size: 16KB
+ *  - 64 PGEs per PGD
+ *  - Each PGE holds 1 PUD and covers 64MB
+ *
+ * Page Upper Directory:
+ *  - Size: 256B
+ *  - 1 PUE per PUD
+ *  - Each PUE holds 1 PMD and covers 64MB
+ *
+ * Page Mid-Level Directory
+ *  - Size: 256B
+ *  - 1 PME per PMD
+ *  - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table
+ *  - All STEs are instantiated at the same time
+ *
+ * Page Table
+ *  - Size: 16KB
+ *  - 4096 PTEs per PT
+ *  - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries
+ *
+ * Pages
+ *  - Size: 4KB
+ *
+ * total PTEs
+ *	= 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs
+ *	= 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT
+ *	= 262144 (or 256 * 1024)
+ */
+#define PGDIR_SHIFT		26
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD		64
+
+#define PUD_SHIFT		26
+#define PTRS_PER_PUD		1
+#define PUD_SIZE		(1UL << PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE - 1))
+#define PUE_SIZE		256
+
+#define PMD_SHIFT		26
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE - 1))
+#define PTRS_PER_PMD		1
+#define PME_SIZE		256
+
+#define __frv_PT_SIZE		256
+
+#define PTRS_PER_PTE		4096
+
+#define USER_PGDS_IN_LAST_PML4	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define USER_PGD_PTRS		(PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT	26
+#define BOOT_USER_PGD_PTRS	(__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS	(PTRS_PER_PGD - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte)
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e)))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e))))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)				\
+do {							\
+	*(pteptr) = (pteval);				\
+	asm volatile("dcf %M0" :: "U"(*pteptr));	\
+} while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pud is never bad, and a pud always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t *pgd)	{ }
+
+#define pgd_populate(mm, pgd, pud)		do { } while (0)
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pgd(pgdptr, pgdval)				\
+do {							\
+	memcpy((pgdptr), &(pgdval), sizeof(pgd_t));	\
+	asm volatile("dcf %M0" :: "U"(*(pgdptr)));	\
+} while(0)
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+	return (pud_t *) pgd;
+}
+
+#define pgd_page(pgd)				(pud_page((pud_t){ pgd }))
+#define pgd_page_vaddr(pgd)			(pud_page_vaddr((pud_t){ pgd }))
+
+/*
+ * allocating and freeing a pud is trivial: the 1-entry pud is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pud_alloc_one(mm, address)		NULL
+#define pud_free(mm, x)				do { } while (0)
+#define __pud_free_tlb(tlb, x, address)		do { } while (0)
+
+/*
+ * The "pud_xxx()" functions here are trivial for a folded two-level
+ * setup: the pmd is never bad, and a pmd always exists (as it's folded
+ * into the pud entry)
+ */
+static inline int pud_none(pud_t pud)		{ return 0; }
+static inline int pud_bad(pud_t pud)		{ return 0; }
+static inline int pud_present(pud_t pud)	{ return 1; }
+static inline void pud_clear(pud_t *pud)	{ }
+
+#define pud_populate(mm, pmd, pte)		do { } while (0)
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval)			set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
+
+#define pud_page(pud)				(pmd_page((pmd_t){ pud }))
+#define pud_page_vaddr(pud)			(pmd_page_vaddr((pmd_t){ pud }))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd);
+
+#define set_pmd(pmdptr, pmdval)			\
+do {						\
+	__set_pmd((pmdptr), (pmdval).ste[0]);	\
+} while(0)
+
+#define __pmd_index(address)			0
+
+static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address)
+{
+	return (pmd_t *) dir + __pmd_index(address);
+}
+
+#define pte_same(a, b)		((a).pte == (b).pte)
+#define pte_page(x)		(mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT))))
+#define pte_none(x)		(!(x).pte)
+#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define VMALLOC_VMADDR(x)	((unsigned long) (x))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * control flags in AMPR registers and TLB entries
+ */
+#define _PAGE_BIT_PRESENT	xAMPRx_V_BIT
+#define _PAGE_BIT_WP		DAMPRx_WP_BIT
+#define _PAGE_BIT_NOCACHE	xAMPRx_C_BIT
+#define _PAGE_BIT_SUPER		xAMPRx_S_BIT
+#define _PAGE_BIT_ACCESSED	xAMPRx_RESERVED8_BIT
+#define _PAGE_BIT_DIRTY		xAMPRx_M_BIT
+#define _PAGE_BIT_NOTGLOBAL	xAMPRx_NG_BIT
+
+#define _PAGE_PRESENT		xAMPRx_V
+#define _PAGE_WP		DAMPRx_WP
+#define _PAGE_NOCACHE		xAMPRx_C
+#define _PAGE_SUPER		xAMPRx_S
+#define _PAGE_ACCESSED		xAMPRx_RESERVED8	/* accessed if set */
+#define _PAGE_DIRTY		xAMPRx_M
+#define _PAGE_NOTGLOBAL		xAMPRx_NG
+
+#define _PAGE_RESERVED_MASK	(xAMPRx_RESERVED8 | xAMPRx_RESERVED13)
+
+#define _PAGE_FILE		0x002	/* set:pagecache unset:swap */
+#define _PAGE_PROTNONE		0x000	/* If not present */
+
+#define _PAGE_CHG_MASK		(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PGPROT_BASE \
+	(_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(__PGPROT_BASE)
+#define PAGE_COPY	__pgprot(__PGPROT_BASE | _PAGE_WP)
+#define PAGE_READONLY	__pgprot(__PGPROT_BASE | _PAGE_WP)
+
+#define __PAGE_KERNEL		(__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY)
+#define __PAGE_KERNEL_NOCACHE	(__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE)
+#define __PAGE_KERNEL_RO	(__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP)
+
+#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL)
+
+#define PAGE_KERNEL		MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO		MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE	MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+
+#define _PAGE_TABLE		(_PAGE_PRESENT | xAMPRx_SS_16Kb)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The FR451 can do execute protection by virtue of having separate TLB miss handlers for
+ * instruction access and for data access. However, we don't have enough reserved bits to say
+ * "execute only", so we don't bother. If you can read it, you can execute it and vice versa.
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'access_ok(VERIFY_WRITE,..)'
+ */
+#undef TEST_ACCESS_OK
+
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define	pmd_bad(x)	(pmd_val(x) & xAMPRx_SS)
+#define pmd_clear(xp)	do { __set_pmd(xp, 0); } while(0)
+
+#define pmd_page_vaddr(pmd) \
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd)	(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#endif
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte)		{ return (pte).pte & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return (pte).pte & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)		{ return !((pte).pte & _PAGE_WP); }
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline pte_t pte_mkclean(pte_t pte)	{ (pte).pte &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ (pte).pte &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)	{ (pte).pte |= _PAGE_WP; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ (pte).pte |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ (pte).pte |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ (pte).pte &= ~_PAGE_WP; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+	return i;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	unsigned long x = xchg(&ptep->pte, 0);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+	return __pte(x);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	set_bit(_PAGE_BIT_WP, ptep);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable"
+ */
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry)	((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot)	pfn_pte((physpage) >> PAGE_SHIFT, pgprot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte &= _PAGE_CHG_MASK;
+	pte.pte |= pgprot_val(newprot);
+	return pte;
+}
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_index_k(addr) pgd_index(addr)
+
+/* Find an entry in the bottom-level page table.. */
+#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+		(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) +  pte_index(address))
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address) \
+	((pte_t *)kmap_atomic(pmd_page(*(dir))) + pte_index(address))
+#define pte_unmap(pte) kunmap_atomic(pte)
+#else
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_unmap(pte) do { } while (0)
+#endif
+
+/*
+ * Handle swap and file entries
+ * - the PTE is encoded in the following format:
+ *	bit 0:		Must be 0 (!_PAGE_PRESENT)
+ *	bit 1:		Type: 0 for swap, 1 for file (_PAGE_FILE)
+ *	bits 2-7:	Swap type
+ *	bits 8-31:	Swap offset
+ *	bits 2-31:	File pgoff
+ */
+#define __swp_type(x)			(((x).val >> 2) & 0x1f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(_pte)	((swp_entry_t) { (_pte).pte })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+	return pte.pte & _PAGE_FILE;
+}
+
+#define PTE_FILE_MAX_BITS	29
+
+#define pte_to_pgoff(PTE)	((PTE).pte >> 2)
+#define pgoff_to_pte(off)	__pte((off) << 2 | _PAGE_FILE)
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define PageSkip(page)		(0)
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+/*
+ * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
+{
+	struct mm_struct *mm;
+	unsigned long ampr;
+
+	mm = current->mm;
+	if (mm) {
+		pgd_t *pge = pgd_offset(mm, address);
+		pud_t *pue = pud_offset(pge, address);
+		pmd_t *pme = pmd_offset(pue, address);
+
+		ampr = pme->ste[0] & 0xffffff00;
+		ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
+			xAMPRx_V;
+	} else {
+		address = ULONG_MAX;
+		ampr = 0;
+	}
+
+	asm volatile("movgs %0,scr0\n"
+		     "movgs %0,scr1\n"
+		     "movgs %1,dampr4\n"
+		     "movgs %1,dampr5\n"
+		     :
+		     : "r"(address), "r"(ampr)
+		     );
+}
+
+#ifdef CONFIG_PROC_FS
+extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer);
+#endif
+
+extern void __init pgtable_cache_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_MMU */
+
+#ifndef __ASSEMBLY__
+extern void __init paging_init(void);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/frv/include/asm/poll.h b/arch/frv/include/asm/poll.h
new file mode 100644
index 00000000..0d01479c
--- /dev/null
+++ b/arch/frv/include/asm/poll.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POLL_H
+#define _ASM_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	256
+
+#include <asm-generic/poll.h>
+
+#undef POLLREMOVE
+
+#endif
+
diff --git a/arch/frv/include/asm/posix_types.h b/arch/frv/include/asm/posix_types.h
new file mode 100644
index 00000000..3f34cb45
--- /dev/null
+++ b/arch/frv/include/asm/posix_types.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+typedef unsigned short	__kernel_nlink_t;
+#define __kernel_nlink_t __kernel_nlink_t
+
+typedef unsigned short	__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+#define __kernel_uid_t __kernel_uid_t
+
+typedef unsigned short	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif
+
diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h
new file mode 100644
index 00000000..9b1a92b7
--- /dev/null
+++ b/arch/frv/include/asm/processor.h
@@ -0,0 +1,148 @@
+/* processor.h: FRV processor definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/registers.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/cache.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ */
+struct cpuinfo_frv {
+#ifdef CONFIG_MMU
+	unsigned long	*pgd_quick;
+	unsigned long	*pte_quick;
+	unsigned long	pgtable_cache_sz;
+#endif
+} __cacheline_aligned;
+
+extern struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+#define cpu_data		(&boot_cpu_data)
+#define current_cpu_data	boot_cpu_data
+
+/*
+ * Bus types
+ */
+#define EISA_bus 0
+#define MCA_bus 0
+
+struct thread_struct {
+	struct pt_regs		*frame;		/* [GR28] exception frame ptr for this thread */
+	struct task_struct	*curr;		/* [GR29] current pointer for this thread */
+	unsigned long		sp;		/* [GR1 ] kernel stack pointer */
+	unsigned long		fp;		/* [GR2 ] kernel frame pointer */
+	unsigned long		lr;		/* link register */
+	unsigned long		pc;		/* program counter */
+	unsigned long		gr[12];		/* [GR16-GR27] */
+	unsigned long		sched_lr;	/* LR from schedule() */
+
+	union {
+		struct pt_regs		*frame0;	/* top (user) stack frame */
+		struct user_context	*user;		/* userspace context */
+	};
+} __attribute__((aligned(8)));
+
+extern struct pt_regs *__kernel_frame0_ptr;
+extern struct task_struct *__kernel_current_task;
+
+#endif
+
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_FRAME0 \
+	((struct pt_regs *) \
+	(sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context)))
+
+#define INIT_THREAD {				\
+	NULL,					\
+	(struct task_struct *) init_stack,	\
+	0, 0, 0, 0,				\
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },	\
+	0,					\
+	{ INIT_THREAD_FRAME0 },			\
+}
+
+/*
+ * do necessary setup to start up a newly executed thread.
+ * - need to discard the frame stacked by init() invoking the execve syscall
+ */
+#define start_thread(_regs, _pc, _usp)			\
+do {							\
+	__frame = __kernel_frame0_ptr;			\
+	__frame->pc	= (_pc);			\
+	__frame->psr	&= ~PSR_S;			\
+	__frame->sp	= (_usp);			\
+} while(0)
+
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+extern asmlinkage void save_user_regs(struct user_context *target);
+extern asmlinkage void *restore_user_regs(const struct user_context *target, ...);
+
+#define copy_segments(tsk, mm)		do { } while (0)
+#define release_segments(mm)		do { } while (0)
+#define forget_segments()		do { } while (0)
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)
+#define	KSTK_ESP(tsk)	((tsk)->thread.frame0->sp)
+
+#define cpu_relax()    barrier()
+
+/* data cache prefetch */
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *x)
+{
+	asm volatile("dcpl %0,gr0,#0" : : "r"(x));
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
new file mode 100644
index 00000000..ef6635ca
--- /dev/null
+++ b/arch/frv/include/asm/ptrace.h
@@ -0,0 +1,89 @@
+/* ptrace.h: ptrace() relevant definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <asm/registers.h>
+#ifdef __KERNEL__
+#include <asm/irq_regs.h>
+
+#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
+#endif
+
+
+#define PT_PSR		0
+#define	PT_ISR		1
+#define PT_CCR		2
+#define PT_CCCR		3
+#define PT_LR		4
+#define PT_LCR		5
+#define PT_PC		6
+
+#define PT__STATUS	7	/* exception status */
+#define PT_SYSCALLNO	8	/* syscall number or -1 */
+#define PT_ORIG_GR8	9	/* saved GR8 for signal handling */
+#define PT_GNER0	10
+#define PT_GNER1	11
+#define PT_IACC0H	12
+#define PT_IACC0L	13
+
+#define PT_GR(j)	( 14 + (j))	/* GRj for 0<=j<=63 */
+#define PT_FR(j)	( 78 + (j))	/* FRj for 0<=j<=63 */
+#define PT_FNER(j)	(142 + (j))	/* FNERj for 0<=j<=1 */
+#define PT_MSR(j)	(144 + (j))	/* MSRj for 0<=j<=2 */
+#define PT_ACC(j)	(146 + (j))	/* ACCj for 0<=j<=7 */
+#define PT_ACCG(jklm)	(154 + (jklm))	/* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
+#define PT_FSR(j)	(156 + (j))	/* FSRj for 0<=j<=0 */
+#define PT__GPEND	78
+#define PT__END		157
+
+#define PT_TBR		PT_GR(0)
+#define PT_SP		PT_GR(1)
+#define PT_FP		PT_GR(2)
+#define PT_PREV_FRAME	PT_GR(28)	/* previous exception frame pointer (old gr28 value) */
+#define PT_CURR_TASK	PT_GR(29)	/* current task */
+
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+/*
+ * we dedicate GR28 to keeping a pointer to the current exception frame
+ * - gr28 is destroyed on entry to the kernel from userspace
+ */
+register struct pt_regs *__frame asm("gr28");
+
+#define user_mode(regs)			(!((regs)->psr & PSR_S))
+#define instruction_pointer(regs)	((regs)->pc)
+#define user_stack_pointer(regs)	((regs)->sp)
+
+extern unsigned long user_stack(const struct pt_regs *);
+#define profile_pc(regs) ((regs)->pc)
+
+#define task_pt_regs(task) ((task)->thread.frame0)
+
+#define arch_has_single_step()	(1)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/frv/include/asm/registers.h b/arch/frv/include/asm/registers.h
new file mode 100644
index 00000000..9666119f
--- /dev/null
+++ b/arch/frv/include/asm/registers.h
@@ -0,0 +1,232 @@
+/* registers.h: register frame declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * notes:
+ *
+ * (1) that the members of all these structures are carefully aligned to permit
+ *     usage of STD/STDF instructions
+ *
+ * (2) if you change these structures, you must change the code in
+ *     arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c}
+ *
+ *
+ * the kernel stack space block looks like this:
+ *
+ *	+0x2000	+----------------------
+ *		| union {
+ *		|	struct frv_frame0 {
+ *		|		struct user_context {
+ *		|			struct user_int_regs
+ *		|			struct user_fpmedia_regs
+ *		|		}
+ *		|		struct frv_debug_regs
+ *		|	}
+ *		|	struct pt_regs [user exception]
+ *		| }
+ *		+---------------------- <-- __kernel_frame0_ptr (maybe GR28)
+ *		|
+ *		| kernel stack
+ *		|
+ *		|......................
+ *		| struct pt_regs [kernel exception]
+ *		|...................... <-- __kernel_frame0_ptr (maybe GR28)
+ *		|
+ *		| kernel stack
+ *		|
+ *		|...................... <-- stack pointer (GR1)
+ *		|
+ *		| unused stack space
+ *		|
+ *		+----------------------
+ *		| struct thread_info
+ *	+0x0000	+---------------------- <-- __current_thread_info (GR15);
+ *
+ * note that GR28 points to the current exception frame
+ */
+
+#ifndef _ASM_REGISTERS_H
+#define _ASM_REGISTERS_H
+
+#ifndef __ASSEMBLY__
+#define __OFFSET(X,N)	((X)+(N)*4)
+#define __OFFSETC(X,N)	xxxxxxxxxxxxxxxxxxxxxxxx
+#else
+#define __OFFSET(X,N)	((X)+(N)*4)
+#define __OFFSETC(X,N)	((X)+(N))
+#endif
+
+/*****************************************************************************/
+/*
+ * Exception/Interrupt frame
+ * - held on kernel stack
+ * - 8-byte aligned on stack (old SP is saved in frame)
+ * - GR0 is fixed 0, so we don't save it
+ */
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long		psr;		/* Processor Status Register */
+	unsigned long		isr;		/* Integer Status Register */
+	unsigned long		ccr;		/* Condition Code Register */
+	unsigned long		cccr;		/* Condition Code for Conditional Insns Register */
+	unsigned long		lr;		/* Link Register */
+	unsigned long		lcr;		/* Loop Count Register */
+	unsigned long		pc;		/* Program Counter Register */
+	unsigned long		__status;	/* exception status */
+	unsigned long		syscallno;	/* syscall number or -1 */
+	unsigned long		orig_gr8;	/* original syscall arg #1 */
+	unsigned long		gner0;
+	unsigned long		gner1;
+	unsigned long long	iacc0;
+	unsigned long		tbr;		/* GR0 is fixed zero, so we use this for TBR */
+	unsigned long		sp;		/* GR1: USP/KSP */
+	unsigned long		fp;		/* GR2: FP */
+	unsigned long		gr3;
+	unsigned long		gr4;
+	unsigned long		gr5;
+	unsigned long		gr6;
+	unsigned long		gr7;		/* syscall number */
+	unsigned long		gr8;		/* 1st syscall param; syscall return */
+	unsigned long		gr9;		/* 2nd syscall param */
+	unsigned long		gr10;		/* 3rd syscall param */
+	unsigned long		gr11;		/* 4th syscall param */
+	unsigned long		gr12;		/* 5th syscall param */
+	unsigned long		gr13;		/* 6th syscall param */
+	unsigned long		gr14;
+	unsigned long		gr15;
+	unsigned long		gr16;		/* GP pointer */
+	unsigned long		gr17;		/* small data */
+	unsigned long		gr18;		/* PIC/PID */
+	unsigned long		gr19;
+	unsigned long		gr20;
+	unsigned long		gr21;
+	unsigned long		gr22;
+	unsigned long		gr23;
+	unsigned long		gr24;
+	unsigned long		gr25;
+	unsigned long		gr26;
+	unsigned long		gr27;
+	struct pt_regs		*next_frame;	/* GR28 - next exception frame */
+	unsigned long		gr29;		/* GR29 - OS reserved */
+	unsigned long		gr30;		/* GR30 - OS reserved */
+	unsigned long		gr31;		/* GR31 - OS reserved */
+} __attribute__((aligned(8)));
+
+#endif
+
+#define REG__STATUS_STEP	0x00000001	/* - reenable single stepping on return */
+#define REG__STATUS_STEPPED	0x00000002	/* - single step caused exception */
+#define REG__STATUS_BROKE	0x00000004	/* - BREAK insn caused exception */
+#define REG__STATUS_SYSC_ENTRY	0x40000000	/* - T on syscall entry (ptrace.c only) */
+#define REG__STATUS_SYSC_EXIT	0x80000000	/* - T on syscall exit (ptrace.c only) */
+
+#define REG_GR(R)	__OFFSET(REG_GR0, (R))
+
+#define REG_SP		REG_GR(1)
+#define REG_FP		REG_GR(2)
+#define REG_PREV_FRAME	REG_GR(28)	/* previous exception frame pointer (old gr28 value) */
+#define REG_CURR_TASK	REG_GR(29)	/* current task */
+
+/*****************************************************************************/
+/*
+ * debugging registers
+ */
+#ifndef __ASSEMBLY__
+
+struct frv_debug_regs
+{
+	unsigned long		dcr;
+	unsigned long		ibar[4] __attribute__((aligned(8)));
+	unsigned long		dbar[4] __attribute__((aligned(8)));
+	unsigned long		dbdr[4][4] __attribute__((aligned(8)));
+	unsigned long		dbmr[4][4] __attribute__((aligned(8)));
+} __attribute__((aligned(8)));
+
+#endif
+
+/*****************************************************************************/
+/*
+ * userspace registers
+ */
+#ifndef __ASSEMBLY__
+
+struct user_int_regs
+{
+	/* integer registers
+	 * - up to gr[31] mirror pt_regs
+	 * - total size must be multiple of 8 bytes
+	 */
+	unsigned long		psr;		/* Processor Status Register */
+	unsigned long		isr;		/* Integer Status Register */
+	unsigned long		ccr;		/* Condition Code Register */
+	unsigned long		cccr;		/* Condition Code for Conditional Insns Register */
+	unsigned long		lr;		/* Link Register */
+	unsigned long		lcr;		/* Loop Count Register */
+	unsigned long		pc;		/* Program Counter Register */
+	unsigned long		__status;	/* exception status */
+	unsigned long		syscallno;	/* syscall number or -1 */
+	unsigned long		orig_gr8;	/* original syscall arg #1 */
+	unsigned long		gner[2];
+	unsigned long long	iacc[1];
+
+	union {
+		unsigned long	tbr;
+		unsigned long	gr[64];
+	};
+};
+
+struct user_fpmedia_regs
+{
+	/* FP/Media registers */
+	unsigned long	fr[64];
+	unsigned long	fner[2];
+	unsigned long	msr[2];
+	unsigned long	acc[8];
+	unsigned char	accg[8];
+	unsigned long	fsr[1];
+};
+
+struct user_context
+{
+	struct user_int_regs		i;
+	struct user_fpmedia_regs	f;
+
+	/* we provide a context extension so that we can save the regs for CPUs that
+	 * implement many more of Fujitsu's lavish register spec
+	 */
+	void *extension;
+} __attribute__((aligned(8)));
+
+struct frv_frame0 {
+	union {
+		struct pt_regs		regs;
+		struct user_context	uc;
+	};
+
+	struct frv_debug_regs		debug;
+
+} __attribute__((aligned(32)));
+
+#endif
+
+#define __INT_GR(R)		__OFFSET(__INT_GR0,		(R))
+
+#define __FPMEDIA_FR(R)		__OFFSET(__FPMEDIA_FR0,		(R))
+#define __FPMEDIA_FNER(R)	__OFFSET(__FPMEDIA_FNER0,	(R))
+#define __FPMEDIA_MSR(R)	__OFFSET(__FPMEDIA_MSR0,	(R))
+#define __FPMEDIA_ACC(R)	__OFFSET(__FPMEDIA_ACC0,	(R))
+#define __FPMEDIA_ACCG(R)	__OFFSETC(__FPMEDIA_ACCG0,	(R))
+#define __FPMEDIA_FSR(R)	__OFFSET(__FPMEDIA_FSR0,	(R))
+
+#define __THREAD_GR(R)		__OFFSET(__THREAD_GR16,		(R) - 16)
+
+#endif /* _ASM_REGISTERS_H */
diff --git a/arch/frv/include/asm/resource.h b/arch/frv/include/asm/resource.h
new file mode 100644
index 00000000..5fc60548
--- /dev/null
+++ b/arch/frv/include/asm/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
+
diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h
new file mode 100644
index 00000000..0e5eb301
--- /dev/null
+++ b/arch/frv/include/asm/scatterlist.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm-generic/scatterlist.h>
+
+#endif /* !_ASM_SCATTERLIST_H */
diff --git a/arch/frv/include/asm/sections.h b/arch/frv/include/asm/sections.h
new file mode 100644
index 00000000..17d0fb17
--- /dev/null
+++ b/arch/frv/include/asm/sections.h
@@ -0,0 +1,46 @@
+/* sections.h: linkage layout variables
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm-generic/sections.h>
+
+#ifdef __KERNEL__
+
+/*
+ * we don't want to put variables in the GP-REL section if they're not used very much - that would
+ * be waste since GP-REL addressing is limited to GP16+/-2048
+ */
+#define __nongpreldata	__attribute__((section(".data")))
+#define __nongprelbss	__attribute__((section(".bss")))
+
+/*
+ * linker symbols
+ */
+extern const void __kernel_image_start, __kernel_image_end, __page_offset;
+
+extern unsigned long __nongprelbss memory_start;
+extern unsigned long __nongprelbss memory_end;
+extern unsigned long __nongprelbss rom_length;
+
+/* determine if we're running from ROM */
+static inline int is_in_rom(unsigned long addr)
+{
+	return 0; /* default case: not in ROM */
+}
+
+#endif
+#endif
+#endif /* _ASM_SECTIONS_H */
diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h
new file mode 100644
index 00000000..a2320a4a
--- /dev/null
+++ b/arch/frv/include/asm/segment.h
@@ -0,0 +1,45 @@
+/* segment.h: MMU segment settings
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#ifdef CONFIG_MMU
+#define USER_DS			MAKE_MM_SEG(TASK_SIZE - 1)
+#define KERNEL_DS		MAKE_MM_SEG(0xdfffffffUL)
+#else
+#define USER_DS			MAKE_MM_SEG(memory_end)
+#define KERNEL_DS		MAKE_MM_SEG(0xe0000000UL)
+#endif
+
+#define get_ds()		(KERNEL_DS)
+#define get_fs()		(__current_thread_info->addr_limit)
+#define segment_eq(a,b)		((a).seg == (b).seg)
+#define __kernel_ds_p()		segment_eq(get_fs(), KERNEL_DS)
+#define get_addr_limit()	(get_fs().seg)
+
+#define set_fs(_x)					\
+do {							\
+	__current_thread_info->addr_limit = (_x);	\
+} while(0)
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_SEGMENT_H */
diff --git a/arch/frv/include/asm/sembuf.h b/arch/frv/include/asm/sembuf.h
new file mode 100644
index 00000000..164b1278
--- /dev/null
+++ b/arch/frv/include/asm/sembuf.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm	sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t		sem_otime;	/* last semop time */
+	unsigned long		__unused1;
+	__kernel_time_t		sem_ctime;	/* last change time */
+	unsigned long		__unused2;
+	unsigned long		sem_nsems;	/* no. of semaphores in array */
+	unsigned long		__unused3;
+	unsigned long		__unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
+
diff --git a/arch/frv/include/asm/serial-regs.h b/arch/frv/include/asm/serial-regs.h
new file mode 100644
index 00000000..e1286bda
--- /dev/null
+++ b/arch/frv/include/asm/serial-regs.h
@@ -0,0 +1,44 @@
+/* serial-regs.h: serial port registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <linux/serial_reg.h>
+#include <asm/irc-regs.h>
+
+#define SERIAL_ICLK	33333333	/* the target serial input clock */
+#define UART0_BASE	0xfeff9c00
+#define UART1_BASE	0xfeff9c40
+
+#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; })
+#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; })
+#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0)
+#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0)
+
+#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); })
+#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); })
+
+#define __set_UART0_IER(V) __set_UART0(UART_IER,(V))
+#define __set_UART1_IER(V) __set_UART1(UART_IER,(V))
+
+/* serial prescaler select register */
+#define __get_UCPSR()	({ *(volatile unsigned long *)(0xfeff9c90); })
+#define __set_UCPSR(V)	do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0)
+#define UCPSR_SELECT0	0x07000000
+#define UCPSR_SELECT1	0x38000000
+
+/* serial prescaler base value register */
+#define __get_UCPVR()	({ *(volatile unsigned long *)(0xfeff9c98); mb(); })
+#define __set_UCPVR(V)	do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0)
+
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h
new file mode 100644
index 00000000..dbb82599
--- /dev/null
+++ b/arch/frv/include/asm/serial.h
@@ -0,0 +1,18 @@
+/*
+ * serial.h
+ *
+ * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/)
+ * Author: Bernardo Innocenti <bernie@codewiz.org>
+ *
+ * Based on linux/include/asm-i386/serial.h
+ */
+#include <asm/serial-regs.h>
+
+/*
+ * the base baud is derived from the clock speed and so is variable
+ */
+#define BASE_BAUD 0
+
+#define STD_COM_FLAGS		ASYNC_BOOT_AUTOCONF
+
+#define SERIAL_PORT_DFNS
diff --git a/arch/frv/include/asm/setup.h b/arch/frv/include/asm/setup.h
new file mode 100644
index 00000000..afd787ce
--- /dev/null
+++ b/arch/frv/include/asm/setup.h
@@ -0,0 +1,31 @@
+/* setup.h: setup stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+#define COMMAND_LINE_SIZE       512
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
+extern unsigned long __initdata num_mappedpages;
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif  /*  __KERNEL__  */
+
+#endif /* _ASM_SETUP_H */
diff --git a/arch/frv/include/asm/shmbuf.h b/arch/frv/include/asm/shmbuf.h
new file mode 100644
index 00000000..4c6e711a
--- /dev/null
+++ b/arch/frv/include/asm/shmbuf.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
+
diff --git a/arch/frv/include/asm/shmparam.h b/arch/frv/include/asm/shmparam.h
new file mode 100644
index 00000000..ab711009
--- /dev/null
+++ b/arch/frv/include/asm/shmparam.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
+
diff --git a/arch/frv/include/asm/sigcontext.h b/arch/frv/include/asm/sigcontext.h
new file mode 100644
index 00000000..3b263f3c
--- /dev/null
+++ b/arch/frv/include/asm/sigcontext.h
@@ -0,0 +1,26 @@
+/* sigcontext.h: FRV signal context
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/registers.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	struct user_context	sc_context;
+	unsigned long		sc_oldmask; 	/* old sigmask */
+} __attribute__((aligned(8)));
+
+#endif
diff --git a/arch/frv/include/asm/siginfo.h b/arch/frv/include/asm/siginfo.h
new file mode 100644
index 00000000..d3fd1ca4
--- /dev/null
+++ b/arch/frv/include/asm/siginfo.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define FPE_MDAOVF	(__SI_FAULT|9)	/* media overflow */
+#undef NSIGFPE
+#define NSIGFPE		9
+
+#endif
+
diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h
new file mode 100644
index 00000000..f071e813
--- /dev/null
+++ b/arch/frv/include/asm/signal.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* !__KERNEL__ */
+
+#define SA_RESTORER	0x04000000 /* to get struct sigaction correct */
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/frv/include/asm/smp.h b/arch/frv/include/asm/smp.h
new file mode 100644
index 00000000..38349ec8
--- /dev/null
+++ b/arch/frv/include/asm/smp.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#endif
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
new file mode 100644
index 00000000..a5b1d7db
--- /dev/null
+++ b/arch/frv/include/asm/socket.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
+#define SO_PROTOCOL		38
+#define SO_DOMAIN		39
+
+#define SO_RXQ_OVFL             40
+
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+#define SO_PEEK_OFF		42
+
+/* Instruct lower device to use last 4-bytes of skb data as FCS */
+#define SO_NOFCS		43
+
+#endif /* _ASM_SOCKET_H */
+
diff --git a/arch/frv/include/asm/sockios.h b/arch/frv/include/asm/sockios.h
new file mode 100644
index 00000000..5dbdd13e
--- /dev/null
+++ b/arch/frv/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SOCKIOS__
+#define _ASM_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS__ */
+
diff --git a/arch/frv/include/asm/spinlock.h b/arch/frv/include/asm/spinlock.h
new file mode 100644
index 00000000..fe385f45
--- /dev/null
+++ b/arch/frv/include/asm/spinlock.h
@@ -0,0 +1,17 @@
+/* spinlock.h: spinlocks for FR-V
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error no spinlocks for FR-V yet
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h
new file mode 100644
index 00000000..d3883021
--- /dev/null
+++ b/arch/frv/include/asm/spr-regs.h
@@ -0,0 +1,416 @@
+/* spr-regs.h: special-purpose registers on the FRV
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPR_REGS_H
+#define _ASM_SPR_REGS_H
+
+/*
+ * PSR - Processor Status Register
+ */
+#define PSR_ET			0x00000001	/* enable interrupts/exceptions flag */
+#define PSR_PS			0x00000002	/* previous supervisor mode flag */
+#define PSR_S			0x00000004	/* supervisor mode flag */
+#define PSR_PIL			0x00000078	/* processor external interrupt level */
+#define PSR_PIL_0		0x00000000	/* - no interrupt in progress */
+#define PSR_PIL_13		0x00000068	/* - debugging only */
+#define PSR_PIL_14		0x00000070	/* - debugging in progress */
+#define PSR_PIL_15		0x00000078	/* - NMI in progress */
+#define PSR_EM			0x00000080	/* enable media operation */
+#define PSR_EF			0x00000100	/* enable FPU operation */
+#define PSR_BE			0x00001000	/* endianness mode */
+#define PSR_BE_LE		0x00000000	/* - little endian mode */
+#define PSR_BE_BE		0x00001000	/* - big endian mode */
+#define PSR_CM			0x00002000	/* conditional mode */
+#define PSR_NEM			0x00004000	/* non-excepting mode */
+#define PSR_ICE			0x00010000	/* in-circuit emulation mode */
+#define PSR_VERSION_SHIFT	24		/* CPU silicon ID */
+#define PSR_IMPLE_SHIFT		28		/* CPU core ID */
+
+#define PSR_VERSION(psr)	(((psr) >> PSR_VERSION_SHIFT) & 0xf)
+#define PSR_IMPLE(psr)		(((psr) >> PSR_IMPLE_SHIFT) & 0xf)
+
+#define PSR_IMPLE_FR401		0x2
+#define PSR_VERSION_FR401_MB93401	0x0
+#define PSR_VERSION_FR401_MB93401A	0x1
+#define PSR_VERSION_FR401_MB93403	0x2
+
+#define PSR_IMPLE_FR405		0x4
+#define PSR_VERSION_FR405_MB93405	0x0
+
+#define PSR_IMPLE_FR451		0x5
+#define PSR_VERSION_FR451_MB93451	0x0
+
+#define PSR_IMPLE_FR501		0x1
+#define PSR_VERSION_FR501_MB93501	0x1
+#define PSR_VERSION_FR501_MB93501A	0x2
+
+#define PSR_IMPLE_FR551		0x3
+#define PSR_VERSION_FR551_MB93555	0x1
+
+#define __get_PSR()	({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; })
+#define __set_PSR(V)	do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0)
+
+/*
+ * TBR - Trap Base Register
+ */
+#define TBR_TT			0x00000ff0
+#define TBR_TT_INSTR_MMU_MISS	(0x01 << 4)
+#define TBR_TT_INSTR_ACC_ERROR	(0x02 << 4)
+#define TBR_TT_INSTR_ACC_EXCEP	(0x03 << 4)
+#define TBR_TT_PRIV_INSTR	(0x06 << 4)
+#define TBR_TT_ILLEGAL_INSTR	(0x07 << 4)
+#define TBR_TT_FP_EXCEPTION	(0x0d << 4)
+#define TBR_TT_MP_EXCEPTION	(0x0e << 4)
+#define TBR_TT_DATA_ACC_ERROR	(0x11 << 4)
+#define TBR_TT_DATA_MMU_MISS	(0x12 << 4)
+#define TBR_TT_DATA_ACC_EXCEP	(0x13 << 4)
+#define TBR_TT_DATA_STR_ERROR	(0x14 << 4)
+#define TBR_TT_DIVISION_EXCEP	(0x17 << 4)
+#define TBR_TT_COMMIT_EXCEP	(0x19 << 4)
+#define TBR_TT_INSTR_TLB_MISS	(0x1a << 4)
+#define TBR_TT_DATA_TLB_MISS	(0x1b << 4)
+#define TBR_TT_DATA_DAT_EXCEP	(0x1d << 4)
+#define TBR_TT_DECREMENT_TIMER	(0x1f << 4)
+#define TBR_TT_COMPOUND_EXCEP	(0x20 << 4)
+#define TBR_TT_INTERRUPT_1	(0x21 << 4)
+#define TBR_TT_INTERRUPT_2	(0x22 << 4)
+#define TBR_TT_INTERRUPT_3	(0x23 << 4)
+#define TBR_TT_INTERRUPT_4	(0x24 << 4)
+#define TBR_TT_INTERRUPT_5	(0x25 << 4)
+#define TBR_TT_INTERRUPT_6	(0x26 << 4)
+#define TBR_TT_INTERRUPT_7	(0x27 << 4)
+#define TBR_TT_INTERRUPT_8	(0x28 << 4)
+#define TBR_TT_INTERRUPT_9	(0x29 << 4)
+#define TBR_TT_INTERRUPT_10	(0x2a << 4)
+#define TBR_TT_INTERRUPT_11	(0x2b << 4)
+#define TBR_TT_INTERRUPT_12	(0x2c << 4)
+#define TBR_TT_INTERRUPT_13	(0x2d << 4)
+#define TBR_TT_INTERRUPT_14	(0x2e << 4)
+#define TBR_TT_INTERRUPT_15	(0x2f << 4)
+#define TBR_TT_TRAP0		(0x80 << 4)
+#define TBR_TT_TRAP1		(0x81 << 4)
+#define TBR_TT_TRAP2		(0x82 << 4)
+#define TBR_TT_TRAP3		(0x83 << 4)
+#define TBR_TT_TRAP120		(0xf8 << 4)
+#define TBR_TT_TRAP121		(0xf9 << 4)
+#define TBR_TT_TRAP122		(0xfa << 4)
+#define TBR_TT_TRAP123		(0xfb << 4)
+#define TBR_TT_TRAP124		(0xfc << 4)
+#define TBR_TT_TRAP125		(0xfd << 4)
+#define TBR_TT_TRAP126		(0xfe << 4)
+#define TBR_TT_BREAK		(0xff << 4)
+
+#define TBR_TT_ATOMIC_CMPXCHG32	TBR_TT_TRAP120
+#define TBR_TT_ATOMIC_XCHG32	TBR_TT_TRAP121
+#define TBR_TT_ATOMIC_XOR	TBR_TT_TRAP122
+#define TBR_TT_ATOMIC_OR	TBR_TT_TRAP123
+#define TBR_TT_ATOMIC_AND	TBR_TT_TRAP124
+#define TBR_TT_ATOMIC_SUB	TBR_TT_TRAP125
+#define TBR_TT_ATOMIC_ADD	TBR_TT_TRAP126
+
+#define __get_TBR()	({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
+
+/*
+ * HSR0 - Hardware Status Register 0
+ */
+#define HSR0_PDM		0x00000007	/* power down mode */
+#define HSR0_PDM_NORMAL		0x00000000	/* - normal mode */
+#define HSR0_PDM_CORE_SLEEP	0x00000001	/* - CPU core sleep mode */
+#define HSR0_PDM_BUS_SLEEP	0x00000003	/* - bus sleep mode */
+#define HSR0_PDM_PLL_RUN	0x00000005	/* - PLL run */
+#define HSR0_PDM_PLL_STOP	0x00000007	/* - PLL stop */
+#define HSR0_GRLE		0x00000040	/* GR lower register set enable */
+#define HSR0_GRHE		0x00000080	/* GR higher register set enable */
+#define HSR0_FRLE		0x00000100	/* FR lower register set enable */
+#define HSR0_FRHE		0x00000200	/* FR higher register set enable */
+#define HSR0_GRN		0x00000400	/* GR quantity */
+#define HSR0_GRN_64		0x00000000	/* - 64 GR registers */
+#define HSR0_GRN_32		0x00000400	/* - 32 GR registers */
+#define HSR0_FRN		0x00000800	/* FR quantity */
+#define HSR0_FRN_64		0x00000000	/* - 64 FR registers */
+#define HSR0_FRN_32		0x00000800	/* - 32 FR registers */
+#define HSR0_SA			0x00001000	/* start address (RAMBOOT#) */
+#define HSR0_ETMI		0x00008000	/* enable TIMERI (64-bit up timer) */
+#define HSR0_ETMD		0x00004000	/* enable TIMERD (32-bit down timer) */
+#define HSR0_PEDAT		0x00010000	/* previous DAT mode */
+#define HSR0_XEDAT		0x00020000	/* exception DAT mode */
+#define HSR0_EDAT		0x00080000	/* enable DAT mode */
+#define HSR0_RME		0x00400000	/* enable RAM mode */
+#define HSR0_EMEM		0x00800000	/* enable MMU_Miss mask */
+#define HSR0_EXMMU		0x01000000	/* enable extended MMU mode */
+#define HSR0_EDMMU		0x02000000	/* enable data MMU */
+#define HSR0_EIMMU		0x04000000	/* enable instruction MMU */
+#define HSR0_CBM		0x08000000	/* copy back mode */
+#define HSR0_CBM_WRITE_THRU	0x00000000	/* - write through */
+#define HSR0_CBM_COPY_BACK	0x08000000	/* - copy back */
+#define HSR0_NWA		0x10000000	/* no write allocate */
+#define HSR0_DCE		0x40000000	/* data cache enable */
+#define HSR0_ICE		0x80000000	/* instruction cache enable */
+
+#define __get_HSR(R)	({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; })
+#define __set_HSR(R,V)	do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0)
+
+/*
+ * CCR - Condition Codes Register
+ */
+#define CCR_FCC0		0x0000000f	/* FP/Media condition 0 (fcc0 reg) */
+#define CCR_FCC1		0x000000f0	/* FP/Media condition 1 (fcc1 reg) */
+#define CCR_FCC2		0x00000f00	/* FP/Media condition 2 (fcc2 reg) */
+#define CCR_FCC3		0x0000f000	/* FP/Media condition 3 (fcc3 reg) */
+#define CCR_ICC0		0x000f0000	/* Integer condition 0 (icc0 reg) */
+#define CCR_ICC0_C		0x00010000	/* - Carry flag */
+#define CCR_ICC0_V		0x00020000	/* - Overflow flag */
+#define CCR_ICC0_Z		0x00040000	/* - Zero flag */
+#define CCR_ICC0_N		0x00080000	/* - Negative flag */
+#define CCR_ICC1		0x00f00000	/* Integer condition 1 (icc1 reg) */
+#define CCR_ICC2		0x0f000000	/* Integer condition 2 (icc2 reg) */
+#define CCR_ICC3		0xf0000000	/* Integer condition 3 (icc3 reg) */
+
+/*
+ * CCCR - Condition Codes for Conditional Instructions Register
+ */
+#define CCCR_CC0		0x00000003	/* condition 0 (cc0 reg) */
+#define CCCR_CC0_FALSE		0x00000002	/* - condition is false */
+#define CCCR_CC0_TRUE		0x00000003	/* - condition is true */
+#define CCCR_CC1		0x0000000c	/* condition 1 (cc1 reg) */
+#define CCCR_CC2		0x00000030	/* condition 2 (cc2 reg) */
+#define CCCR_CC3		0x000000c0	/* condition 3 (cc3 reg) */
+#define CCCR_CC4		0x00000300	/* condition 4 (cc4 reg) */
+#define CCCR_CC5		0x00000c00	/* condition 5 (cc5 reg) */
+#define CCCR_CC6		0x00003000	/* condition 6 (cc6 reg) */
+#define CCCR_CC7		0x0000c000	/* condition 7 (cc7 reg) */
+
+/*
+ * ISR - Integer Status Register
+ */
+#define ISR_EMAM		0x00000001	/* memory misaligned access handling */
+#define ISR_EMAM_EXCEPTION	0x00000000	/* - generate exception */
+#define ISR_EMAM_FUDGE		0x00000001	/* - mask out invalid address bits */
+#define ISR_AEXC		0x00000004	/* accrued [overflow] exception */
+#define ISR_DTT			0x00000018	/* division type trap */
+#define ISR_DTT_IGNORE		0x00000000	/* - ignore division error */
+#define ISR_DTT_DIVBYZERO	0x00000008	/* - generate exception */
+#define ISR_DTT_OVERFLOW	0x00000010	/* - record overflow */
+#define ISR_EDE			0x00000020	/* enable division exception */
+#define ISR_PLI			0x20000000	/* pre-load instruction information */
+#define ISR_QI			0x80000000	/* quad data implementation information */
+
+/*
+ * EPCR0 - Exception PC Register
+ */
+#define EPCR0_V			0x00000001	/* register content validity indicator */
+#define EPCR0_PC		0xfffffffc	/* faulting instruction address */
+
+/*
+ * ESR0/14/15 - Exception Status Register
+ */
+#define ESRx_VALID		0x00000001	/* register content validity indicator */
+#define ESRx_EC			0x0000003e	/* exception type */
+#define ESRx_EC_DATA_STORE	0x00000000	/* - data_store_error */
+#define ESRx_EC_INSN_ACCESS	0x00000006	/* - instruction_access_error */
+#define ESRx_EC_PRIV_INSN	0x00000008	/* - privileged_instruction */
+#define ESRx_EC_ILL_INSN	0x0000000a	/* - illegal_instruction */
+#define ESRx_EC_MP_EXCEP	0x0000001c	/* - mp_exception */
+#define ESRx_EC_DATA_ACCESS	0x00000020	/* - data_access_error */
+#define ESRx_EC_DIVISION	0x00000026	/* - division_exception */
+#define ESRx_EC_ITLB_MISS	0x00000034	/* - instruction_access_TLB_miss */
+#define ESRx_EC_DTLB_MISS	0x00000036	/* - data_access_TLB_miss */
+#define ESRx_EC_DATA_ACCESS_DAT	0x0000003a	/* - data_access_DAT_exception */
+
+#define ESR0_IAEC		0x00000100	/* info for instruction-access-exception */
+#define ESR0_IAEC_RESV		0x00000000	/* - reserved */
+#define ESR0_IAEC_PROT_VIOL	0x00000100	/* - protection violation */
+
+#define ESR0_ATXC		0x00f00000	/* address translation exception code */
+#define ESR0_ATXC_MMU_MISS	0x00000000	/* - MMU miss exception and more (?) */
+#define ESR0_ATXC_MULTI_DAT	0x00800000	/* - multiple DAT entry hit */
+#define ESR0_ATXC_MULTI_SAT	0x00900000	/* - multiple SAT entry hit */
+#define ESR0_ATXC_AMRTLB_MISS	0x00a00000	/* - MMU/TLB miss exception */
+#define ESR0_ATXC_PRIV_EXCEP	0x00c00000	/* - privilege protection fault */
+#define ESR0_ATXC_WP_EXCEP	0x00d00000	/* - write protection fault */
+
+#define ESR0_EAV		0x00000800	/* true if EAR0 register valid */
+#define ESR15_EAV		0x00000800	/* true if EAR15 register valid */
+
+/*
+ * ESFR1 - Exception Status Valid Flag Register
+ */
+#define ESFR1_ESR0		0x00000001	/* true if ESR0 is valid */
+#define ESFR1_ESR14		0x00004000	/* true if ESR14 is valid */
+#define ESFR1_ESR15		0x00008000	/* true if ESR15 is valid */
+
+/*
+ * MSR - Media Status Register
+ */
+#define MSR0_AOVF		0x00000001	/* overflow exception accrued */
+#define MSRx_OVF		0x00000002	/* overflow exception detected */
+#define MSRx_SIE		0x0000003c	/* last SIMD instruction exception detected */
+#define MSRx_SIE_NONE		0x00000000	/* - none detected */
+#define MSRx_SIE_FRkHI_ACCk	0x00000020	/* - exception at FRkHI or ACCk */
+#define MSRx_SIE_FRkLO_ACCk1	0x00000010	/* - exception at FRkLO or ACCk+1 */
+#define MSRx_SIE_FRk1HI_ACCk2	0x00000008	/* - exception at FRk+1HI or ACCk+2 */
+#define MSRx_SIE_FRk1LO_ACCk3	0x00000004	/* - exception at FRk+1LO or ACCk+3 */
+#define MSR0_MTT		0x00007000	/* type of last media trap detected */
+#define MSR0_MTT_NONE		0x00000000	/* - none detected */
+#define MSR0_MTT_OVERFLOW	0x00001000	/* - overflow detected */
+#define MSR0_HI			0x00c00000	/* hardware implementation */
+#define MSR0_HI_ROUNDING	0x00000000	/* - rounding mode */
+#define MSR0_HI_NONROUNDING	0x00c00000	/* - non-rounding mode */
+#define MSR0_EMCI		0x01000000	/* enable media custom instructions */
+#define MSR0_SRDAV		0x10000000	/* select rounding mode of MAVEH */
+#define MSR0_SRDAV_RDAV		0x00000000	/* - controlled by MSR.RDAV */
+#define MSR0_SRDAV_RD		0x10000000	/* - controlled by MSR.RD */
+#define MSR0_RDAV		0x20000000	/* rounding mode of MAVEH */
+#define MSR0_RDAV_NEAREST_MI	0x00000000	/* - round to nearest minus */
+#define MSR0_RDAV_NEAREST_PL	0x20000000	/* - round to nearest plus */
+#define MSR0_RD			0xc0000000	/* rounding mode */
+#define MSR0_RD_NEAREST		0x00000000	/* - nearest */
+#define MSR0_RD_ZERO		0x40000000	/* - zero */
+#define MSR0_RD_POS_INF		0x80000000	/* - positive infinity */
+#define MSR0_RD_NEG_INF		0xc0000000	/* - negative infinity */
+
+/*
+ * IAMPR0-7 - Instruction Address Mapping Register
+ * DAMPR0-7 - Data Address Mapping Register
+ */
+#define xAMPRx_V		0x00000001	/* register content validity indicator */
+#define DAMPRx_WP		0x00000002	/* write protect */
+#define DAMPRx_WP_RW		0x00000000	/* - read/write */
+#define DAMPRx_WP_RO		0x00000002	/* - read-only */
+#define xAMPRx_C		0x00000004	/* cached/uncached */
+#define xAMPRx_C_CACHED		0x00000000	/* - cached */
+#define xAMPRx_C_UNCACHED	0x00000004	/* - uncached */
+#define xAMPRx_S		0x00000008	/* supervisor only */
+#define xAMPRx_S_USER		0x00000000	/* - userspace can access */
+#define xAMPRx_S_KERNEL		0x00000008	/* - kernel only */
+#define xAMPRx_SS		0x000000f0	/* segment size */
+#define xAMPRx_SS_16Kb		0x00000000	/* - 16 kilobytes */
+#define xAMPRx_SS_64Kb		0x00000010	/* - 64 kilobytes */
+#define xAMPRx_SS_256Kb		0x00000020	/* - 256 kilobytes */
+#define xAMPRx_SS_1Mb		0x00000030	/* - 1 megabyte */
+#define xAMPRx_SS_2Mb		0x00000040	/* - 2 megabytes */
+#define xAMPRx_SS_4Mb		0x00000050	/* - 4 megabytes */
+#define xAMPRx_SS_8Mb		0x00000060	/* - 8 megabytes */
+#define xAMPRx_SS_16Mb		0x00000070	/* - 16 megabytes */
+#define xAMPRx_SS_32Mb		0x00000080	/* - 32 megabytes */
+#define xAMPRx_SS_64Mb		0x00000090	/* - 64 megabytes */
+#define xAMPRx_SS_128Mb		0x000000a0	/* - 128 megabytes */
+#define xAMPRx_SS_256Mb		0x000000b0	/* - 256 megabytes */
+#define xAMPRx_SS_512Mb		0x000000c0	/* - 512 megabytes */
+#define xAMPRx_RESERVED8	0x00000100	/* reserved bit */
+#define xAMPRx_NG		0x00000200	/* non-global */
+#define xAMPRx_L		0x00000400	/* locked */
+#define xAMPRx_M		0x00000800	/* modified */
+#define xAMPRx_D		0x00001000	/* DAT entry */
+#define xAMPRx_RESERVED13	0x00002000	/* reserved bit */
+#define xAMPRx_PPFN		0xfff00000	/* physical page frame number */
+
+#define xAMPRx_V_BIT		0
+#define DAMPRx_WP_BIT		1
+#define xAMPRx_C_BIT		2
+#define xAMPRx_S_BIT		3
+#define xAMPRx_RESERVED8_BIT	8
+#define xAMPRx_NG_BIT		9
+#define xAMPRx_L_BIT		10
+#define xAMPRx_M_BIT		11
+#define xAMPRx_D_BIT		12
+#define xAMPRx_RESERVED13_BIT	13
+
+#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; })
+
+#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; })
+
+#define __set_IAMPR(R,V) 	do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0)
+#define __set_DAMPR(R,V)  	do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0)
+
+#define __set_IAMLR(R,V) 	do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0)
+#define __set_DAMLR(R,V)  	do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0)
+
+#define save_dampr(R, _dampr)					\
+do {								\
+	asm volatile("movsg dampr"R",%0" : "=r"(_dampr));	\
+} while(0)
+
+#define restore_dampr(R, _dampr)			\
+do {							\
+	asm volatile("movgs %0,dampr"R :: "r"(_dampr));	\
+} while(0)
+
+/*
+ * AMCR - Address Mapping Control Register
+ */
+#define AMCR_IAMRN		0x000000ff	/* quantity of IAMPR registers */
+#define AMCR_DAMRN		0x0000ff00	/* quantity of DAMPR registers */
+
+/*
+ * TTBR - Address Translation Table Base Register
+ */
+#define __get_TTBR()		({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; })
+
+/*
+ * TPXR - TLB Probe Extend Register
+ */
+#define TPXR_E			0x00000001
+#define TPXR_LMAX_SHIFT		20
+#define TPXR_LMAX_SMASK		0xf
+#define TPXR_WMAX_SHIFT		24
+#define TPXR_WMAX_SMASK		0xf
+#define TPXR_WAY_SHIFT		28
+#define TPXR_WAY_SMASK		0xf
+
+/*
+ * DCR - Debug Control Register
+ */
+#define DCR_IBCE3		0x00000001	/* break on conditional insn pointed to by IBAR3 */
+#define DCR_IBE3		0x00000002	/* break on insn pointed to by IBAR3 */
+#define DCR_IBCE1		0x00000004	/* break on conditional insn pointed to by IBAR2 */
+#define DCR_IBE1		0x00000008	/* break on insn pointed to by IBAR2 */
+#define DCR_IBCE2		0x00000010	/* break on conditional insn pointed to by IBAR1 */
+#define DCR_IBE2		0x00000020	/* break on insn pointed to by IBAR1 */
+#define DCR_IBCE0		0x00000040	/* break on conditional insn pointed to by IBAR0 */
+#define DCR_IBE0		0x00000080	/* break on insn pointed to by IBAR0 */
+
+#define DCR_DDBE1		0x00004000	/* use DBDR1x when checking DBAR1 */
+#define DCR_DWBE1		0x00008000	/* break on store to address in DBAR1/DBMR1x */
+#define DCR_DRBE1		0x00010000	/* break on load from address in DBAR1/DBMR1x */
+#define DCR_DDBE0		0x00020000	/* use DBDR0x when checking DBAR0 */
+#define DCR_DWBE0		0x00040000	/* break on store to address in DBAR0/DBMR0x */
+#define DCR_DRBE0		0x00080000	/* break on load from address in DBAR0/DBMR0x */
+
+#define DCR_EIM			0x0c000000	/* external interrupt disable */
+#define DCR_IBM			0x10000000	/* instruction break disable */
+#define DCR_SE			0x20000000	/* single step enable */
+#define DCR_EBE			0x40000000	/* exception break enable */
+
+/*
+ * BRR - Break Interrupt Request Register
+ */
+#define BRR_ST			0x00000001	/* single-step detected */
+#define BRR_SB			0x00000002	/* break instruction detected */
+#define BRR_BB			0x00000004	/* branch with hint detected */
+#define BRR_CBB			0x00000008	/* branch to LR detected */
+#define BRR_IBx			0x000000f0	/* hardware breakpoint detected */
+#define BRR_DBx			0x00000f00	/* hardware watchpoint detected */
+#define BRR_DBNEx		0x0000f000	/* ? */
+#define BRR_EBTT		0x00ff0000	/* trap type of exception break */
+#define BRR_TB			0x10000000	/* external break request detected */
+#define BRR_CB			0x20000000	/* ICE break command detected */
+#define BRR_EB			0x40000000	/* exception break detected */
+
+/*
+ * BPSR - Break PSR Save Register
+ */
+#define BPSR_BET		0x00000001	/* former PSR.ET */
+#define BPSR_BS			0x00001000	/* former PSR.S */
+
+#endif /* _ASM_SPR_REGS_H */
diff --git a/arch/frv/include/asm/stat.h b/arch/frv/include/asm/stat.h
new file mode 100644
index 00000000..ce56de9b
--- /dev/null
+++ b/arch/frv/include/asm/stat.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+/* This matches struct stat in uClibc/glibc.  */
+struct stat {
+	unsigned char __pad1[6];
+	unsigned short st_dev;
+
+	unsigned long __pad2;
+	unsigned long st_ino;
+
+	unsigned short __pad3;
+	unsigned short st_mode;
+	unsigned short __pad4;
+	unsigned short st_nlink;
+
+	unsigned short __pad5;
+	unsigned short st_uid;
+	unsigned short __pad6;
+	unsigned short st_gid;
+
+	unsigned char __pad7[6];
+	unsigned short st_rdev;
+
+	unsigned long __pad8;
+	unsigned long st_size;
+
+	unsigned long __pad9;		/* align 64-bit st_blocks to 2-word */
+	unsigned long st_blksize;
+
+	unsigned long __pad10;	/* future possible st_blocks high bits */
+	unsigned long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long __unused1;
+	unsigned long st_atime;
+
+	unsigned long __unused2;
+	unsigned long st_mtime;
+
+	unsigned long __unused3;
+	unsigned long st_ctime;
+
+	unsigned long long __unused4;
+};
+
+/* This matches struct stat64 in uClibc/glibc.  The layout is exactly
+   the same as that of struct stat above, with 64-bit types taking up
+   space that was formerly used by padding.  stat syscalls are still
+   different from stat64, though, in that the former tests for
+   overflow.  */
+struct stat64 {
+	unsigned char __pad1[6];
+	unsigned short st_dev;
+
+	unsigned long long st_ino;
+
+	unsigned int st_mode;
+	unsigned int st_nlink;
+
+	unsigned long st_uid;
+	unsigned long st_gid;
+
+	unsigned char __pad2[6];
+	unsigned short st_rdev;
+
+	long long st_size;
+
+	unsigned long __pad3;		/* align 64-bit st_blocks to 2-word */
+	unsigned long st_blksize;
+
+	unsigned long __pad4;		/* future possible st_blocks high bits */
+	unsigned long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long st_atime_nsec;
+	unsigned long st_atime;
+
+	unsigned int st_mtime_nsec;
+	unsigned long st_mtime;
+
+	unsigned long st_ctime_nsec;
+	unsigned long st_ctime;
+
+	unsigned long long __unused4;
+};
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/frv/include/asm/statfs.h b/arch/frv/include/asm/statfs.h
new file mode 100644
index 00000000..741f5860
--- /dev/null
+++ b/arch/frv/include/asm/statfs.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_STATFS_H */
+
diff --git a/arch/frv/include/asm/string.h b/arch/frv/include/asm/string.h
new file mode 100644
index 00000000..5ed310f6
--- /dev/null
+++ b/arch/frv/include/asm/string.h
@@ -0,0 +1,51 @@
+/* string.h: FRV string handling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_STRING_H_
+#define _ASM_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+#endif /* _ASM_STRING_H_ */
diff --git a/arch/frv/include/asm/swab.h b/arch/frv/include/asm/swab.h
new file mode 100644
index 00000000..f305834b
--- /dev/null
+++ b/arch/frv/include/asm/swab.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* _ASM_SWAB_H */
diff --git a/arch/frv/include/asm/switch_to.h b/arch/frv/include/asm/switch_to.h
new file mode 100644
index 00000000..2cf0f6a7
--- /dev/null
+++ b/arch/frv/include/asm/switch_to.h
@@ -0,0 +1,35 @@
+/* FR-V CPU basic task switching
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SWITCH_TO_H
+#define _ASM_SWITCH_TO_H
+
+#include <linux/thread_info.h>
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ * The `mb' is to tell GCC not to cache `current' across this call.
+ */
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev_thread,
+				struct thread_struct *next_thread,
+				struct task_struct *prev);
+
+#define switch_to(prev, next, last)					\
+do {									\
+	(prev)->thread.sched_lr =					\
+		(unsigned long) __builtin_return_address(0);		\
+	(last) = __switch_to(&(prev)->thread, &(next)->thread, (prev));	\
+	mb();								\
+} while(0)
+
+#endif /* _ASM_SWITCH_TO_H */
diff --git a/arch/frv/include/asm/syscall.h b/arch/frv/include/asm/syscall.h
new file mode 100644
index 00000000..70689eb2
--- /dev/null
+++ b/arch/frv/include/asm/syscall.h
@@ -0,0 +1,123 @@
+/* syscall parameter access functions
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+/*
+ * Get the system call number or -1
+ */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->syscallno;
+}
+
+/*
+ * Restore the clobbered GR8 register
+ * (1st syscall arg was overwritten with syscall return or error)
+ */
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gr8 = regs->orig_gr8;
+}
+
+/*
+ * See if the syscall return value is an error, returning it if it is and 0 if
+ * not
+ */
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->gr8) ? regs->gr8 : 0;
+}
+
+/*
+ * Get the syscall return value
+ */
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gr8;
+}
+
+/*
+ * Set the syscall return value
+ */
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->gr8 = -error;
+	else
+		regs->gr8 = val;
+}
+
+/*
+ * Retrieve the system call arguments
+ */
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	/*
+	 * Do this simply for now. If we need to start supporting
+	 * fetching arguments from arbitrary indices, this will need some
+	 * extra logic. Presently there are no in-tree users that depend
+	 * on this behaviour.
+	 */
+	BUG_ON(i);
+
+	/* Argument pattern is: GR8, GR9, GR10, GR11, GR12, GR13 */
+	switch (n) {
+	case 6: args[5] = regs->gr13;
+	case 5: args[4] = regs->gr12;
+	case 4: args[3] = regs->gr11;
+	case 3: args[2] = regs->gr10;
+	case 2: args[1] = regs->gr9;
+	case 1:	args[0] = regs->gr8;
+		break;
+	default:
+		BUG();
+	}
+}
+
+/*
+ * Alter the system call arguments
+ */
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	/* Same note as above applies */
+	BUG_ON(i);
+
+	switch (n) {
+	case 6: regs->gr13 = args[5];
+	case 5: regs->gr12 = args[4];
+	case 4: regs->gr11 = args[3];
+	case 3: regs->gr10 = args[2];
+	case 2: regs->gr9  = args[1];
+	case 1: regs->gr8  = args[0];
+		break;
+	default:
+		BUG();
+	}
+}
+
+#endif /* _ASM_SYSCALL_H */
diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/asm/termbits.h
new file mode 100644
index 00000000..7722e19c
--- /dev/null
+++ b/arch/frv/include/asm/termbits.h
@@ -0,0 +1,203 @@
+#ifndef _ASM_TERMBITS_H__
+#define _ASM_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* Input baud rate */
+#define CTVB	  004000000000		/* VisioBraille Terminal flow control */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	16			/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+#define EXTPROC	0200000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_TERMBITS_H__ */
+
diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h
new file mode 100644
index 00000000..b4868aaf
--- /dev/null
+++ b/arch/frv/include/asm/termios.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+#include <asm-generic/termios-base.h>
+#endif
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
new file mode 100644
index 00000000..92d83ea9
--- /dev/null
+++ b/arch/frv/include/asm/thread_info.h
@@ -0,0 +1,137 @@
+/* thread_info.h: description
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/thread_info.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define THREAD_SIZE		8192
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		status;		/* thread-synchronous flags */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+						 * 0-0xBFFFFFFF for user-thead
+						 * 0-0xFFFFFFFF for kernel-thread
+						 */
+	struct restart_block    restart_block;
+
+	__u8			supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *__current_thread_info asm("gr15");
+
+#define current_thread_info() ({ __current_thread_info; })
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info_node(tsk, node)			\
+		kzalloc_node(THREAD_SIZE, GFP_KERNEL, node)
+#else
+#define alloc_thread_info_node(tsk, node)			\
+		kmalloc_node(THREAD_SIZE, GFP_KERNEL, node)
+#endif
+
+#define free_thread_info(info)	kfree(info)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPM		0x0001	/* FPU/Media was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/frv/include/asm/timer-regs.h b/arch/frv/include/asm/timer-regs.h
new file mode 100644
index 00000000..6c5a871c
--- /dev/null
+++ b/arch/frv/include/asm/timer-regs.h
@@ -0,0 +1,106 @@
+/* timer-regs.h: hardware timer register definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/sections.h>
+
+extern unsigned long __nongprelbss __clkin_clock_speed_HZ;
+extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __res_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __sdram_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_clock_speed_HZ;
+extern unsigned long __nongprelbss __dsu_clock_speed_HZ;
+extern unsigned long __nongprelbss __serial_clock_speed_HZ;
+
+#define __get_CLKC()	({ *(volatile unsigned long *)(0xfeff9a00); })
+
+static inline void __set_CLKC(unsigned long v)
+{
+	int tmp;
+
+	asm volatile("	st%I0.p	%2,%M0		\n"
+		     "	setlos	%3,%1		\n"
+		     "	membar			\n"
+		     "0:			\n"
+		     "	subicc	%1,#1,%1,icc0	\n"
+		     "	bnc	icc0,#1,0b	\n"
+		     : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp)
+		     : "r"(v), "i"(256)
+		     : "icc0");
+}
+
+#define __get_TCTR()	({ *(volatile unsigned long *)(0xfeff9418); })
+#define __get_TPRV()	({ *(volatile unsigned long *)(0xfeff9420); })
+#define __get_TPRCKSL()	({ *(volatile unsigned long *)(0xfeff9428); })
+#define __get_TCSR(T)	({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); })
+#define __get_TxCKSL(T)	({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); })
+
+#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; })
+
+#define __set_TCTR(V)	do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0)
+#define __set_TPRV(V)	do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0)
+#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0)
+#define __set_TCSR(T,V)	\
+do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TxCKSL(T,V) \
+do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24)
+#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V)))
+
+/* clock control register */
+#define CLKC_CMODE		0x0f000000
+#define CLKC_SLPL		0x000f0000
+#define CLKC_P0			0x00000100
+#define CLKC_CM			0x00000003
+
+#define CLKC_CMODE_s		24
+
+/* timer control register - non-readback mode */
+#define TCTR_MODE_0		0x00000000
+#define TCTR_MODE_2		0x04000000
+#define TCTR_MODE_4		0x08000000
+#define TCTR_MODE_5		0x0a000000
+#define TCTR_RL_LATCH		0x00000000
+#define TCTR_RL_RW_LOW8		0x10000000
+#define TCTR_RL_RW_HIGH8	0x20000000
+#define TCTR_RL_RW_LH8		0x30000000
+#define TCTR_SC_CTR0		0x00000000
+#define TCTR_SC_CTR1		0x40000000
+#define TCTR_SC_CTR2		0x80000000
+
+/* timer control register - readback mode */
+#define TCTR_CNT0		0x02000000
+#define TCTR_CNT1		0x04000000
+#define TCTR_CNT2		0x08000000
+#define TCTR_NSTATUS		0x10000000
+#define TCTR_NCOUNT		0x20000000
+#define TCTR_SC_READBACK	0xc0000000
+
+/* timer control status registers - non-readback mode */
+#define TCSRx_DATA		0xff000000
+
+/* timer control status registers - readback mode */
+#define TCSRx_OUTPUT		0x80000000
+#define TCSRx_NULLCOUNT		0x40000000
+#define TCSRx_RL		0x30000000
+#define TCSRx_MODE		0x07000000
+
+/* timer clock select registers */
+#define TxCKSL_SELECT		0x0f000000
+#define __TxCKSL_SELECT(X)	((X) << 24)
+#define TxCKSL_EIGHT		0xf0000000
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/frv/include/asm/timex.h b/arch/frv/include/asm/timex.h
new file mode 100644
index 00000000..a89bddef
--- /dev/null
+++ b/arch/frv/include/asm/timex.h
@@ -0,0 +1,20 @@
+/* timex.h: FR-V architecture timex specifications
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#define CLOCK_TICK_RATE		1193180 /* Underlying HZ */
+#define CLOCK_TICK_FACTOR	20	/* Factor of both 1000000 and CLOCK_TICK_RATE */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#define vxtime_lock()		do {} while (0)
+#define vxtime_unlock()		do {} while (0)
+
+#endif
+
diff --git a/arch/frv/include/asm/tlb.h b/arch/frv/include/asm/tlb.h
new file mode 100644
index 00000000..cd458eb6
--- /dev/null
+++ b/arch/frv/include/asm/tlb.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_MMU
+extern void check_pgt_cache(void);
+#else
+#define check_pgt_cache() do {} while(0)
+#endif
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)				do { } while (0)
+#define tlb_end_vma(tlb, vma)				do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
+
diff --git a/arch/frv/include/asm/tlbflush.h b/arch/frv/include/asm/tlbflush.h
new file mode 100644
index 00000000..7ac5eafc
--- /dev/null
+++ b/arch/frv/include/asm/tlbflush.h
@@ -0,0 +1,73 @@
+/* tlbflush.h: TLB flushing functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef __ASSEMBLY__
+extern void asmlinkage __flush_tlb_all(void);
+extern void asmlinkage __flush_tlb_mm(unsigned long contextid);
+extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start);
+extern void asmlinkage __flush_tlb_range(unsigned long contextid,
+					 unsigned long start, unsigned long end);
+#endif /* !__ASSEMBLY__ */
+
+#define flush_tlb_all()				\
+do {						\
+	preempt_disable();			\
+	__flush_tlb_all();			\
+	preempt_enable();			\
+} while(0)
+
+#define flush_tlb_mm(mm)			\
+do {						\
+	preempt_disable();			\
+	__flush_tlb_mm((mm)->context.id);	\
+	preempt_enable();			\
+} while(0)
+
+#define flush_tlb_range(vma,start,end)					\
+do {									\
+	preempt_disable();						\
+	__flush_tlb_range((vma)->vm_mm->context.id, start, end);	\
+	preempt_enable();						\
+} while(0)
+
+#define flush_tlb_page(vma,addr)				\
+do {								\
+	preempt_disable();					\
+	__flush_tlb_page((vma)->vm_mm->context.id, addr);	\
+	preempt_enable();					\
+} while(0)
+
+
+#define __flush_tlb_global()			flush_tlb_all()
+#define flush_tlb()				flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)	flush_tlb_all()
+
+#else
+
+#define flush_tlb()				BUG()
+#define flush_tlb_all()				BUG()
+#define flush_tlb_mm(mm)			BUG()
+#define flush_tlb_page(vma,addr)		BUG()
+#define flush_tlb_range(mm,start,end)		BUG()
+#define flush_tlb_kernel_range(start, end)	BUG()
+
+#endif
+
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/arch/frv/include/asm/topology.h b/arch/frv/include/asm/topology.h
new file mode 100644
index 00000000..94272435
--- /dev/null
+++ b/arch/frv/include/asm/topology.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_TOPOLOGY_H
+#define _ASM_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#error NUMA not supported yet
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_TOPOLOGY_H */
diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h
new file mode 100644
index 00000000..390a612f
--- /dev/null
+++ b/arch/frv/include/asm/types.h
@@ -0,0 +1,26 @@
+/* types.h: FRV types
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h
new file mode 100644
index 00000000..0b67ec5b
--- /dev/null
+++ b/arch/frv/include/asm/uaccess.h
@@ -0,0 +1,319 @@
+/* uaccess.h: userspace accessor functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/segment.h>
+#include <asm/sections.h>
+
+#define HAVE_ARCH_UNMAPPED_AREA	/* we decide where to put mmaps */
+
+#define __ptr(x) ((unsigned long __force *)(x))
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
+{
+#ifdef CONFIG_MMU
+	int flag = -EFAULT, tmp;
+
+	asm volatile (
+		"	addcc	%3,%2,%1,icc0	\n"	/* set C-flag if addr+size>4GB */
+		"	subcc.p	%1,%4,gr0,icc1	\n"	/* jump if addr+size>limit */
+		"	bc	icc0,#0,0f	\n"
+		"	bhi	icc1,#0,0f	\n"
+		"	setlos	#0,%0		\n"	/* mark okay */
+		"0:				\n"
+		: "=r"(flag), "=&r"(tmp)
+		: "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag)
+		);
+
+	return flag;
+
+#else
+
+	if (addr < memory_start ||
+	    addr > memory_end ||
+	    size > memory_end - memory_start ||
+	    addr + size > memory_end)
+		return -EFAULT;
+
+	return 0;
+#endif
+}
+
+#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size))
+
+#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0)
+#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr)						\
+({									\
+	int __pu_err = 0;						\
+									\
+	typeof(*(ptr)) __pu_val = (x);					\
+	__chk_user_ptr(ptr);						\
+									\
+	switch (sizeof (*(ptr))) {					\
+	case 1:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "b", "r");	\
+		break;							\
+	case 2:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "h", "r");	\
+		break;							\
+	case 4:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "",  "r");	\
+		break;							\
+	case 8:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "d", "e");	\
+		break;							\
+	default:							\
+		__pu_err = __put_user_bad();				\
+		break;							\
+	}								\
+	__pu_err;							\
+})
+
+#define put_user(x, ptr)			\
+({						\
+	typeof(*(ptr)) __user *_p = (ptr);	\
+	int _e;					\
+						\
+	_e = __range_ok(_p, sizeof(*_p));	\
+	if (_e == 0)				\
+		_e = __put_user((x), _p);	\
+	_e;					\
+})
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#ifdef CONFIG_MMU
+
+#define __put_user_asm(err,x,ptr,dsize,constraint)					\
+do {											\
+	asm volatile("1:	st"dsize"%I1	%2,%M1	\n"				\
+		     "2:				\n"				\
+		     ".subsection 2			\n"				\
+		     "3:	setlos		%3,%0	\n"				\
+		     "		bra		2b	\n"				\
+		     ".previous				\n"				\
+		     ".section __ex_table,\"a\"		\n"				\
+		     "		.balign		8	\n"				\
+		     "		.long		1b,3b	\n"				\
+		     ".previous"							\
+		     : "=r" (err)							\
+		     : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err)	\
+		     : "memory");							\
+} while (0)
+
+#else
+
+#define __put_user_asm(err,x,ptr,bwl,con)	\
+do {						\
+	asm("	st"bwl"%I0	%1,%M0	\n"	\
+	    "	membar			\n"	\
+	    :					\
+	    : "m" (*__ptr(ptr)), con (x)	\
+	    : "memory");			\
+} while (0)
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define __get_user(x, ptr)						\
+({									\
+	int __gu_err = 0;						\
+	__chk_user_ptr(ptr);						\
+									\
+	switch (sizeof(*(ptr))) {					\
+	case 1: {							\
+		unsigned char __gu_val;					\
+		__get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r");	\
+		(x) = *(__force __typeof__(*(ptr)) *) &__gu_val;	\
+		break;							\
+	}								\
+	case 2: {							\
+		unsigned short __gu_val;				\
+		__get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r");	\
+		(x) = *(__force __typeof__(*(ptr)) *) &__gu_val;	\
+		break;							\
+	}								\
+	case 4: {							\
+		unsigned int __gu_val;					\
+		__get_user_asm(__gu_err, __gu_val, ptr, "", "=r");	\
+		(x) = *(__force __typeof__(*(ptr)) *) &__gu_val;	\
+		break;							\
+	}								\
+	case 8: {							\
+		unsigned long long __gu_val;				\
+		__get_user_asm(__gu_err, __gu_val, ptr, "d", "=e");	\
+		(x) = *(__force __typeof__(*(ptr)) *) &__gu_val;	\
+		break;							\
+	}								\
+	default:							\
+		__gu_err = __get_user_bad();				\
+		break;							\
+	}								\
+	__gu_err;							\
+})
+
+#define get_user(x, ptr)			\
+({						\
+	const typeof(*(ptr)) __user *_p = (ptr);\
+	int _e;					\
+						\
+	_e = __range_ok(_p, sizeof(*_p));	\
+	if (likely(_e == 0))			\
+		_e = __get_user((x), _p);	\
+	else					\
+		(x) = (typeof(x)) 0;		\
+	_e;					\
+})
+
+extern int __get_user_bad(void);
+
+#ifdef CONFIG_MMU
+
+#define __get_user_asm(err,x,ptr,dtype,constraint)	\
+do {							\
+	asm("1:		ld"dtype"%I2	%M2,%1	\n"	\
+	    "2:					\n"	\
+	    ".subsection 2			\n"	\
+	    "3:		setlos		%3,%0	\n"	\
+	    "		setlos		#0,%1	\n"	\
+	    "		bra		2b	\n"	\
+	    ".previous				\n"	\
+	    ".section __ex_table,\"a\"		\n"	\
+	    "		.balign		8	\n"	\
+	    "		.long		1b,3b	\n"	\
+	    ".previous"					\
+	    : "=r" (err), constraint (x)		\
+	    : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err)	\
+	    );						\
+} while(0)
+
+#else
+
+#define __get_user_asm(err,x,ptr,bwl,con)	\
+	asm("	ld"bwl"%I1	%M1,%0	\n"	\
+	    "	membar			\n"	\
+	    : con(x)				\
+	    : "m" (*__ptr(ptr)))
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define ____force(x) (__force void *)(void __user *)(x)
+#ifdef CONFIG_MMU
+extern long __memset_user(void *dst, unsigned long count);
+extern long __memcpy_user(void *dst, const void *src, unsigned long count);
+
+#define clear_user(dst,count)			__memset_user(____force(dst), (count))
+#define __copy_from_user_inatomic(to, from, n)	__memcpy_user((to), ____force(from), (n))
+#define __copy_to_user_inatomic(to, from, n)	__memcpy_user(____force(to), (from), (n))
+
+#else
+
+#define clear_user(dst,count)			(memset(____force(dst), 0, (count)), 0)
+#define __copy_from_user_inatomic(to, from, n)	(memcpy((to), ____force(from), (n)), 0)
+#define __copy_to_user_inatomic(to, from, n)	(memcpy(____force(to), (from), (n)), 0)
+
+#endif
+
+#define __clear_user clear_user
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_to_user_inatomic(to, from, n);
+}
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_from_user_inatomic(to, from, n);
+}
+
+static inline long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long ret = n;
+
+	if (likely(__access_ok(from, n)))
+		ret = __copy_from_user(to, from, n);
+
+	if (unlikely(ret != 0))
+		memset(to + (n - ret), 0, ret);
+
+	return ret;
+}
+
+static inline long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n;
+}
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *src, long count);
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+extern unsigned long search_exception_table(unsigned long addr);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/frv/include/asm/ucontext.h b/arch/frv/include/asm/ucontext.h
new file mode 100644
index 00000000..8d8c0c94
--- /dev/null
+++ b/arch/frv/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long		uc_flags;
+	struct ucontext		*uc_link;
+	stack_t			uc_stack;
+	struct sigcontext	uc_mcontext;
+	sigset_t		uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/frv/include/asm/unaligned.h b/arch/frv/include/asm/unaligned.h
new file mode 100644
index 00000000..6c61c05b
--- /dev/null
+++ b/arch/frv/include/asm/unaligned.h
@@ -0,0 +1,22 @@
+/* unaligned.h: unaligned access handler
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_UNALIGNED_H */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
new file mode 100644
index 00000000..a569dff7
--- /dev/null
+++ b/arch/frv/include/asm/unistd.h
@@ -0,0 +1,388 @@
+#ifndef _ASM_UNISTD_H_
+#define _ASM_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+// #define __NR_oldolduname	 /* 59 */ obsolete
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+// #define __NR_mmap		 90	/* obsolete - not implemented */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+// #define __NR_profil		 /* 98 */ obsolete
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+// #define __NR_ioperm		/* 101 */ not supported
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+// #define __NR_olduname		/* 109 */ obsolete
+// #define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+// #define __NR_idle		/* 112 */ Obsolete
+// #define __NR_vm86old		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+// #define __NR_modify_ldt	/* 123 */ not supported
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+// #define __NR_vm86		/* 166 */ not supported
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+#define __NR_security		223	/* syscall for security modules */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_event_open	336
+#define __NR_setns		337
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 338
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+/* #define __ARCH_WANT_OLD_READDIR */
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+/* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_IPC
+#define __ARCH_WANT_SYS_PAUSE
+/* #define __ARCH_WANT_SYS_SGETMASK */
+/* #define __ARCH_WANT_SYS_SIGNAL */
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+/* #define __ARCH_WANT_SYS_SIGPENDING */
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H_ */
diff --git a/arch/frv/include/asm/user.h b/arch/frv/include/asm/user.h
new file mode 100644
index 00000000..82fa8fab
--- /dev/null
+++ b/arch/frv/include/asm/user.h
@@ -0,0 +1,80 @@
+/* user.h: FR-V core file format stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/registers.h>
+
+/* Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the 'trad-core' bfd).  There are quite a number of
+ * obstacles to being able to view the contents of the floating point
+ * registers, and until these are solved you will not be able to view
+ * the contents of them.  Actually, you can read in the core file and
+ * look at the contents of the user struct to find out what the
+ * floating point registers contain.
+ *
+ * The actual file contents are as follows:
+ * UPAGE:
+ *   1 page consisting of a user struct that tells gdb what is present
+ *   in the file.  Directly after this is a copy of the task_struct,
+ *   which is currently not used by gdb, but it may come in useful at
+ *   some point.  All of the registers are stored as part of the
+ *   upage.  The upage should always be only one page.
+ *
+ * DATA:
+ *   The data area is stored.  We use current->end_text to
+ *   current->brk to pick up all of the user variables, plus any
+ *   memory that may have been malloced.  No attempt is made to
+ *   determine if a page is demand-zero or if a page is totally
+ *   unused, we just cover the entire range.  All of the addresses are
+ *   rounded in such a way that an integral number of pages is
+ *   written.
+ *
+ * STACK:
+ *   We need the stack information in order to get a meaningful
+ *   backtrace.  We need to write the data from (esp) to
+ *   current->start_stack, so we round each of these off in order to
+ *   be able to write an integer number of pages.  The minimum core
+ *   file size is 3 pages, or 12288 bytes.
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ * this will be used by gdb to figure out where the data and stack segments
+ *  are within the file, and what virtual addresses to use.
+ */
+struct user {
+	/* We start with the registers, to mimic the way that "memory" is returned
+	 * from the ptrace(3,...) function.  */
+	struct user_context	regs;
+
+	/* The rest of this junk is to help gdb figure out what goes where */
+	unsigned long		u_tsize;	/* Text segment size (pages). */
+	unsigned long		u_dsize;	/* Data segment size (pages). */
+	unsigned long		u_ssize;	/* Stack segment size (pages). */
+	unsigned long		start_code;     /* Starting virtual address of text. */
+	unsigned long		start_stack;	/* Starting virtual address of stack area.
+						 * This is actually the bottom of the stack,
+						 * the top of the stack is always found in the
+						 * esp register.  */
+	long int		signal;		/* Signal that caused the core dump. */
+
+	unsigned long		magic;		/* To uniquely identify a core file */
+	char			u_comm[32];	/* User command that was responsible */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/arch/frv/include/asm/vga.h b/arch/frv/include/asm/vga.h
new file mode 100644
index 00000000..a702c800
--- /dev/null
+++ b/arch/frv/include/asm/vga.h
@@ -0,0 +1,17 @@
+/* vga.h: VGA register stuff
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h
new file mode 100644
index 00000000..b26d70ab
--- /dev/null
+++ b/arch/frv/include/asm/virtconvert.h
@@ -0,0 +1,41 @@
+/* virtconvert.h: virtual/physical/page address conversion
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_VIRTCONVERT_H
+#define _ASM_VIRTCONVERT_H
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#ifdef CONFIG_MMU
+
+#define phys_to_virt(vaddr)	((void *) ((unsigned long)(vaddr) + PAGE_OFFSET))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr) - PAGE_OFFSET)
+
+#else
+
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#endif
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#define __page_address(page)	(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
+
+#endif
+#endif
diff --git a/arch/frv/include/asm/xor.h b/arch/frv/include/asm/xor.h
new file mode 100644
index 00000000..c82eb12a
--- /dev/null
+++ b/arch/frv/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/frv/kernel/Makefile b/arch/frv/kernel/Makefile
new file mode 100644
index 00000000..c36f70b6
--- /dev/null
+++ b/arch/frv/kernel/Makefile
@@ -0,0 +1,23 @@
+#
+# Makefile for the linux kernel.
+#
+
+heads-y				:= head-uc-fr401.o head-uc-fr451.o head-uc-fr555.o
+heads-$(CONFIG_MMU)		:= head-mmu-fr451.o
+
+extra-y:= head.o init_task.o vmlinux.lds
+
+obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o kernel_thread.o \
+	 kernel_execve.o process.o traps.o ptrace.o signal.o dma.o \
+	 sys_frv.o time.o setup.o frv_ksyms.o \
+	 debug-stub.o irq.o sleep.o uaccess.o
+
+obj-$(CONFIG_GDBSTUB)		+= gdb-stub.o gdb-io.o
+
+obj-$(CONFIG_MB93091_VDK)	+= irq-mb93091.o
+obj-$(CONFIG_PM)		+= pm.o cmode.o
+obj-$(CONFIG_MB93093_PDK)	+= pm-mb93093.o
+obj-$(CONFIG_FUJITSU_MB93493)	+= irq-mb93493.o
+obj-$(CONFIG_SYSCTL)		+= sysctl.o
+obj-$(CONFIG_FUTEX)		+= futex.o
+obj-$(CONFIG_MODULES)		+= module.o
diff --git a/arch/frv/kernel/asm-offsets.c b/arch/frv/kernel/asm-offsets.c
new file mode 100644
index 00000000..9de96843
--- /dev/null
+++ b/arch/frv/kernel/asm-offsets.c
@@ -0,0 +1,108 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/kbuild.h>
+#include <asm/registers.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/gdb-stub.h>
+
+#define DEF_PTREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct pt_regs, " #reg ")" \
+		     : : "i" (offsetof(struct pt_regs, reg)))
+
+#define DEF_IREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+		     : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_FREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+		     : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_0REG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct frv_frame0, " #reg ")" \
+		     : : "i" (offsetof(struct frv_frame0, reg)))
+
+void foo(void)
+{
+	/* offsets into the thread_info structure */
+	OFFSET(TI_TASK,			thread_info, task);
+	OFFSET(TI_EXEC_DOMAIN,		thread_info, exec_domain);
+	OFFSET(TI_FLAGS,		thread_info, flags);
+	OFFSET(TI_STATUS,		thread_info, status);
+	OFFSET(TI_CPU,			thread_info, cpu);
+	OFFSET(TI_PREEMPT_COUNT,	thread_info, preempt_count);
+	OFFSET(TI_ADDR_LIMIT,		thread_info, addr_limit);
+	OFFSET(TI_RESTART_BLOCK,	thread_info, restart_block);
+	BLANK();
+
+	/* offsets into register file storage */
+	DEF_PTREG(REG_PSR,		psr);
+	DEF_PTREG(REG_ISR,		isr);
+	DEF_PTREG(REG_CCR,		ccr);
+	DEF_PTREG(REG_CCCR,		cccr);
+	DEF_PTREG(REG_LR,		lr);
+	DEF_PTREG(REG_LCR,		lcr);
+	DEF_PTREG(REG_PC,		pc);
+	DEF_PTREG(REG__STATUS,		__status);
+	DEF_PTREG(REG_SYSCALLNO,	syscallno);
+	DEF_PTREG(REG_ORIG_GR8,		orig_gr8);
+	DEF_PTREG(REG_GNER0,		gner0);
+	DEF_PTREG(REG_GNER1,		gner1);
+	DEF_PTREG(REG_IACC0,		iacc0);
+	DEF_PTREG(REG_TBR,		tbr);
+	DEF_PTREG(REG_GR0,		tbr);
+	DEFINE(REG__END,		sizeof(struct pt_regs));
+	BLANK();
+
+	DEF_0REG(REG_DCR,		debug.dcr);
+	DEF_0REG(REG_IBAR0,		debug.ibar[0]);
+	DEF_0REG(REG_DBAR0,		debug.dbar[0]);
+	DEF_0REG(REG_DBDR00,		debug.dbdr[0][0]);
+	DEF_0REG(REG_DBMR00,		debug.dbmr[0][0]);
+	BLANK();
+
+	DEF_IREG(__INT_GR0,		i.gr[0]);
+	DEF_FREG(__USER_FPMEDIA,	f);
+	DEF_FREG(__FPMEDIA_FR0,		f.fr[0]);
+	DEF_FREG(__FPMEDIA_FNER0,	f.fner[0]);
+	DEF_FREG(__FPMEDIA_MSR0,	f.msr[0]);
+	DEF_FREG(__FPMEDIA_ACC0,	f.acc[0]);
+	DEF_FREG(__FPMEDIA_ACCG0,	f.accg[0]);
+	DEF_FREG(__FPMEDIA_FSR0,	f.fsr[0]);
+	BLANK();
+
+	DEFINE(NR_PT_REGS,		sizeof(struct pt_regs) / 4);
+	DEFINE(NR_USER_INT_REGS,	sizeof(struct user_int_regs) / 4);
+	DEFINE(NR_USER_FPMEDIA_REGS,	sizeof(struct user_fpmedia_regs) / 4);
+	DEFINE(NR_USER_CONTEXT,		sizeof(struct user_context) / 4);
+	DEFINE(FRV_FRAME0_SIZE,		sizeof(struct frv_frame0));
+	BLANK();
+
+	/* offsets into thread_struct */
+	OFFSET(__THREAD_FRAME,		thread_struct, frame);
+	OFFSET(__THREAD_CURR,		thread_struct, curr);
+	OFFSET(__THREAD_SP,		thread_struct, sp);
+	OFFSET(__THREAD_FP,		thread_struct, fp);
+	OFFSET(__THREAD_LR,		thread_struct, lr);
+	OFFSET(__THREAD_PC,		thread_struct, pc);
+	OFFSET(__THREAD_GR16,		thread_struct, gr[0]);
+	OFFSET(__THREAD_SCHED_LR,	thread_struct, sched_lr);
+	OFFSET(__THREAD_FRAME0,		thread_struct, frame0);
+	OFFSET(__THREAD_USER,		thread_struct, user);
+	BLANK();
+
+	/* offsets into frv_debug_status */
+	OFFSET(DEBUG_BPSR,		frv_debug_status, bpsr);
+	OFFSET(DEBUG_DCR,		frv_debug_status, dcr);
+	OFFSET(DEBUG_BRR,		frv_debug_status, brr);
+	OFFSET(DEBUG_NMAR,		frv_debug_status, nmar);
+	BLANK();
+}
diff --git a/arch/frv/kernel/break.S b/arch/frv/kernel/break.S
new file mode 100644
index 00000000..cbb6958a
--- /dev/null
+++ b/arch/frv/kernel/break.S
@@ -0,0 +1,792 @@
+/* break.S: Break interrupt handling (kept separate from entry.S)
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/ptrace.h>
+#include <asm/thread_info.h>
+#include <asm/spr-regs.h>
+
+#include <asm/errno.h>
+
+#
+# the break handler has its own stack
+#
+	.section	.bss..stack
+	.globl		__break_user_context
+	.balign		THREAD_SIZE
+__break_stack:
+	.space		THREAD_SIZE - FRV_FRAME0_SIZE
+__break_frame_0:
+	.space		FRV_FRAME0_SIZE
+
+#
+# miscellaneous variables
+#
+	.section	.bss
+#ifdef CONFIG_MMU
+	.globl		__break_tlb_miss_real_return_info
+__break_tlb_miss_real_return_info:
+	.balign		8
+	.space		2*4			/* saved PCSR, PSR for TLB-miss handler fixup */
+#endif
+
+__break_trace_through_exceptions:
+	.space		4
+
+#define CS2_ECS1	0xe1200000
+#define CS2_USERLED	0x4
+
+.macro LEDS val,reg
+#	sethi.p		%hi(CS2_ECS1+CS2_USERLED),gr30
+#	setlo		%lo(CS2_ECS1+CS2_USERLED),gr30
+#	setlos		#~\val,\reg
+#	st		\reg,@(gr30,gr0)
+#	setlos		#0x5555,\reg
+#	sethi.p		%hi(0xffc00100),gr30
+#	setlo		%lo(0xffc00100),gr30
+#	sth		\reg,@(gr30,gr0)
+#	membar
+.endm
+
+###############################################################################
+#
+# entry point for Break Exceptions/Interrupts
+#
+###############################################################################
+	.section	.text..break
+	.balign		4
+	.globl		__entry_break
+__entry_break:
+#ifdef CONFIG_MMU
+	movgs		gr31,scr3
+#endif
+	LEDS		0x1001,gr31
+
+	sethi.p		%hi(__break_frame_0),gr31
+	setlo		%lo(__break_frame_0),gr31
+
+	stdi		gr2,@(gr31,#REG_GR(2))
+	movsg		ccr,gr3
+	sti		gr3,@(gr31,#REG_CCR)
+
+	# catch the return from a TLB-miss handler that had single-step disabled
+	# traps will be enabled, so we have to do this now
+#ifdef CONFIG_MMU
+	movsg		bpcsr,gr3
+	sethi.p		%hi(__break_tlb_miss_return_breaks_here),gr2
+	setlo		%lo(__break_tlb_miss_return_breaks_here),gr2
+	subcc		gr2,gr3,gr0,icc0
+	beq		icc0,#2,__break_return_singlestep_tlbmiss
+#endif
+
+	# determine whether we have stepped through into an exception
+	# - we need to take special action to suspend h/w single stepping if we've done
+	#   that, so that the gdbstub doesn't get bogged down endlessly stepping through
+	#   external interrupt handling
+	movsg		bpsr,gr3
+	andicc		gr3,#BPSR_BET,gr0,icc0
+	bne		icc0,#2,__break_maybe_userspace	/* jump if PSR.ET was 1 */
+
+	LEDS		0x1003,gr2
+
+	movsg		brr,gr3
+	andicc		gr3,#BRR_ST,gr0,icc0
+	andicc.p	gr3,#BRR_SB,gr0,icc1
+	bne		icc0,#2,__break_step		/* jump if single-step caused break */
+	beq		icc1,#2,__break_continue	/* jump if BREAK didn't cause break */
+
+	LEDS		0x1007,gr2
+
+	# handle special breaks
+	movsg		bpcsr,gr3
+
+	sethi.p		%hi(__entry_return_singlestep_breaks_here),gr2
+	setlo		%lo(__entry_return_singlestep_breaks_here),gr2
+	subcc		gr2,gr3,gr0,icc0
+	beq		icc0,#2,__break_return_singlestep
+
+	bra		__break_continue
+
+
+###############################################################################
+#
+# handle BREAK instruction in kernel-mode exception epilogue
+#
+###############################################################################
+__break_return_singlestep:
+	LEDS		0x100f,gr2
+
+	# special break insn requests single-stepping to be turned back on
+	#		HERE		RETT
+	# PSR.ET	0		0
+	# PSR.PS	old PSR.S	?
+	# PSR.S		1		1
+	# BPSR.ET	0		1 (can't have caused orig excep otherwise)
+	# BPSR.BS	1		old PSR.S
+	movsg		dcr,gr2
+	sethi.p		%hi(DCR_SE),gr3
+	setlo		%lo(DCR_SE),gr3
+	or		gr2,gr3,gr2
+	movgs		gr2,dcr
+
+	movsg		psr,gr2
+	andi		gr2,#PSR_PS,gr2
+	slli		gr2,#11,gr2			/* PSR.PS -> BPSR.BS */
+	ori		gr2,#BPSR_BET,gr2		/* 1 -> BPSR.BET */
+	movgs		gr2,bpsr
+
+	# return to the invoker of the original kernel exception
+	movsg		pcsr,gr2
+	movgs		gr2,bpcsr
+
+	LEDS		0x101f,gr2
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	lddi.p		@(gr31,#REG_GR(2)),gr2
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+###############################################################################
+#
+# handle BREAK instruction in TLB-miss handler return path
+#
+###############################################################################
+#ifdef CONFIG_MMU
+__break_return_singlestep_tlbmiss:
+	LEDS		0x1100,gr2
+
+	sethi.p		%hi(__break_tlb_miss_real_return_info),gr3
+	setlo		%lo(__break_tlb_miss_real_return_info),gr3
+	lddi		@(gr3,#0),gr2
+	movgs		gr2,pcsr
+	movgs		gr3,psr
+
+	bra		__break_return_singlestep
+#endif
+
+
+###############################################################################
+#
+# handle single stepping into an exception prologue from kernel mode
+# - we try and catch it whilst it is still in the main vector table
+# - if we catch it there, we have to jump to the fixup handler
+#   - there is a fixup table that has a pointer for every 16b slot in the trap
+#     table
+#
+###############################################################################
+__break_step:
+	LEDS		0x2003,gr2
+
+	# external interrupts seem to escape from the trap table before single
+	# step catches up with them
+	movsg		bpcsr,gr2
+	sethi.p		%hi(__entry_kernel_external_interrupt),gr3
+	setlo		%lo(__entry_kernel_external_interrupt),gr3
+	subcc.p		gr2,gr3,gr0,icc0
+	sethi		%hi(__entry_uspace_external_interrupt),gr3
+	setlo.p		%lo(__entry_uspace_external_interrupt),gr3
+	beq		icc0,#2,__break_step_kernel_external_interrupt
+	subcc.p		gr2,gr3,gr0,icc0
+	sethi		%hi(__entry_kernel_external_interrupt_virtually_disabled),gr3
+	setlo.p		%lo(__entry_kernel_external_interrupt_virtually_disabled),gr3
+	beq		icc0,#2,__break_step_uspace_external_interrupt
+	subcc.p		gr2,gr3,gr0,icc0
+	sethi		%hi(__entry_kernel_external_interrupt_virtual_reenable),gr3
+	setlo.p		%lo(__entry_kernel_external_interrupt_virtual_reenable),gr3
+	beq		icc0,#2,__break_step_kernel_external_interrupt_virtually_disabled
+	subcc		gr2,gr3,gr0,icc0
+	beq		icc0,#2,__break_step_kernel_external_interrupt_virtual_reenable
+
+	LEDS		0x2007,gr2
+
+	# the two main vector tables are adjacent on one 8Kb slab
+	movsg		bpcsr,gr2
+	setlos		#0xffffe000,gr3
+	and		gr2,gr3,gr2
+	sethi.p		%hi(__trap_tables),gr3
+	setlo		%lo(__trap_tables),gr3
+	subcc		gr2,gr3,gr0,icc0
+	bne		icc0,#2,__break_continue
+
+	LEDS		0x200f,gr2
+
+	# skip workaround if so requested by GDB
+	sethi.p		%hi(__break_trace_through_exceptions),gr3
+	setlo		%lo(__break_trace_through_exceptions),gr3
+	ld		@(gr3,gr0),gr3
+	subcc		gr3,gr0,gr0,icc0
+	bne		icc0,#0,__break_continue
+
+	LEDS		0x201f,gr2
+
+	# access the fixup table - there's a 1:1 mapping between the slots in the trap tables and
+	# the slots in the trap fixup tables allowing us to simply divide the offset into the
+	# former by 4 to access the latter
+	sethi.p		%hi(__trap_tables),gr3
+	setlo		%lo(__trap_tables),gr3
+	movsg		bpcsr,gr2
+	sub		gr2,gr3,gr2
+	srli.p		gr2,#2,gr2
+
+	sethi		%hi(__trap_fixup_tables),gr3
+	setlo.p		%lo(__trap_fixup_tables),gr3
+	andi		gr2,#~3,gr2
+	ld		@(gr2,gr3),gr2
+	jmpil		@(gr2,#0)
+
+# step through an internal exception from kernel mode
+	.globl		__break_step_kernel_softprog_interrupt
+__break_step_kernel_softprog_interrupt:
+	sethi.p		%hi(__entry_kernel_softprog_interrupt_reentry),gr3
+	setlo		%lo(__entry_kernel_softprog_interrupt_reentry),gr3
+	bra		__break_return_as_kernel_prologue
+
+# step through an external interrupt from kernel mode
+	.globl		__break_step_kernel_external_interrupt
+__break_step_kernel_external_interrupt:
+	# deal with virtual interrupt disablement
+	beq		icc2,#0,__break_step_kernel_external_interrupt_virtually_disabled
+
+	sethi.p		%hi(__entry_kernel_external_interrupt_reentry),gr3
+	setlo		%lo(__entry_kernel_external_interrupt_reentry),gr3
+
+__break_return_as_kernel_prologue:
+	LEDS		0x203f,gr2
+
+	movgs		gr3,bpcsr
+
+	# do the bit we had to skip
+#ifdef CONFIG_MMU
+	movsg		ear0,gr2		/* EAR0 can get clobbered by gdb-stub (ICI/ICEI) */
+	movgs		gr2,scr2
+#endif
+
+	or.p		sp,gr0,gr2		/* set up the stack pointer */
+	subi		sp,#REG__END,sp
+	sti.p		gr2,@(sp,#REG_SP)
+
+	setlos		#REG__STATUS_STEP,gr2
+	sti		gr2,@(sp,#REG__STATUS)		/* record single step status */
+
+	# cancel single-stepping mode
+	movsg		dcr,gr2
+	sethi.p		%hi(~DCR_SE),gr3
+	setlo		%lo(~DCR_SE),gr3
+	and		gr2,gr3,gr2
+	movgs		gr2,dcr
+
+	LEDS		0x207f,gr2
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	lddi.p		@(gr31,#REG_GR(2)),gr2
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+# we single-stepped into an interrupt handler whilst interrupts were merely virtually disabled
+# need to really disable interrupts, set flag, fix up and return
+__break_step_kernel_external_interrupt_virtually_disabled:
+	movsg		psr,gr2
+	andi		gr2,#~PSR_PIL,gr2
+	ori		gr2,#PSR_PIL_14,gr2	/* debugging interrupts only */
+	movgs		gr2,psr
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	subcc.p		gr0,gr0,gr0,icc2	/* leave Z set, clear C */
+
+	# exceptions must've been enabled and we must've been in supervisor mode
+	setlos		BPSR_BET|BPSR_BS,gr3
+	movgs		gr3,bpsr
+
+	# return to where the interrupt happened
+	movsg		pcsr,gr2
+	movgs		gr2,bpcsr
+
+	lddi.p		@(gr31,#REG_GR(2)),gr2
+
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+# we stepped through into the virtual interrupt reenablement trap
+#
+# we also want to single step anyway, but after fixing up so that we get an event on the
+# instruction after the broken-into exception returns
+	.globl		__break_step_kernel_external_interrupt_virtual_reenable
+__break_step_kernel_external_interrupt_virtual_reenable:
+	movsg		psr,gr2
+	andi		gr2,#~PSR_PIL,gr2
+	movgs		gr2,psr
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	subicc		gr0,#1,gr0,icc2		/* clear Z, set C */
+
+	# save the adjusted ICC2
+	movsg		ccr,gr3
+	sti		gr3,@(gr31,#REG_CCR)
+
+	# exceptions must've been enabled and we must've been in supervisor mode
+	setlos		BPSR_BET|BPSR_BS,gr3
+	movgs		gr3,bpsr
+
+	# return to where the trap happened
+	movsg		pcsr,gr2
+	movgs		gr2,bpcsr
+
+	# and then process the single step
+	bra		__break_continue
+
+# step through an internal exception from uspace mode
+	.globl		__break_step_uspace_softprog_interrupt
+__break_step_uspace_softprog_interrupt:
+	sethi.p		%hi(__entry_uspace_softprog_interrupt_reentry),gr3
+	setlo		%lo(__entry_uspace_softprog_interrupt_reentry),gr3
+	bra		__break_return_as_uspace_prologue
+
+# step through an external interrupt from kernel mode
+	.globl		__break_step_uspace_external_interrupt
+__break_step_uspace_external_interrupt:
+	sethi.p		%hi(__entry_uspace_external_interrupt_reentry),gr3
+	setlo		%lo(__entry_uspace_external_interrupt_reentry),gr3
+
+__break_return_as_uspace_prologue:
+	LEDS		0x20ff,gr2
+
+	movgs		gr3,bpcsr
+
+	# do the bit we had to skip
+	sethi.p		%hi(__kernel_frame0_ptr),gr28
+	setlo		%lo(__kernel_frame0_ptr),gr28
+	ldi.p		@(gr28,#0),gr28
+
+	setlos		#REG__STATUS_STEP,gr2
+	sti		gr2,@(gr28,#REG__STATUS)	/* record single step status */
+
+	# cancel single-stepping mode
+	movsg		dcr,gr2
+	sethi.p		%hi(~DCR_SE),gr3
+	setlo		%lo(~DCR_SE),gr3
+	and		gr2,gr3,gr2
+	movgs		gr2,dcr
+
+	LEDS		0x20fe,gr2
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	lddi.p		@(gr31,#REG_GR(2)),gr2
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+#ifdef CONFIG_MMU
+# step through an ITLB-miss handler from user mode
+	.globl		__break_user_insn_tlb_miss
+__break_user_insn_tlb_miss:
+	# we'll want to try the trap stub again
+	sethi.p		%hi(__trap_user_insn_tlb_miss),gr2
+	setlo		%lo(__trap_user_insn_tlb_miss),gr2
+	movgs		gr2,bpcsr
+
+__break_tlb_miss_common:
+	LEDS		0x2101,gr2
+
+	# cancel single-stepping mode
+	movsg		dcr,gr2
+	sethi.p		%hi(~DCR_SE),gr3
+	setlo		%lo(~DCR_SE),gr3
+	and		gr2,gr3,gr2
+	movgs		gr2,dcr
+
+	# we'll swap the real return address for one with a BREAK insn so that we can re-enable
+	# single stepping on return
+	movsg		pcsr,gr2
+	sethi.p		%hi(__break_tlb_miss_real_return_info),gr3
+	setlo		%lo(__break_tlb_miss_real_return_info),gr3
+	sti		gr2,@(gr3,#0)
+
+	sethi.p		%hi(__break_tlb_miss_return_break),gr2
+	setlo		%lo(__break_tlb_miss_return_break),gr2
+	movgs		gr2,pcsr
+
+	# we also have to fudge PSR because the return BREAK is in kernel space and we want
+	# to get a BREAK fault not an access violation should the return be to userspace
+	movsg		psr,gr2
+	sti.p		gr2,@(gr3,#4)
+	ori		gr2,#PSR_PS,gr2
+	movgs		gr2,psr
+
+	LEDS		0x2102,gr2
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	lddi		@(gr31,#REG_GR(2)),gr2
+	movsg		scr3,gr31
+	movgs		gr0,brr
+	rett		#1
+
+# step through a DTLB-miss handler from user mode
+	.globl		__break_user_data_tlb_miss
+__break_user_data_tlb_miss:
+	# we'll want to try the trap stub again
+	sethi.p		%hi(__trap_user_data_tlb_miss),gr2
+	setlo		%lo(__trap_user_data_tlb_miss),gr2
+	movgs		gr2,bpcsr
+	bra		__break_tlb_miss_common
+
+# step through an ITLB-miss handler from kernel mode
+	.globl		__break_kernel_insn_tlb_miss
+__break_kernel_insn_tlb_miss:
+	# we'll want to try the trap stub again
+	sethi.p		%hi(__trap_kernel_insn_tlb_miss),gr2
+	setlo		%lo(__trap_kernel_insn_tlb_miss),gr2
+	movgs		gr2,bpcsr
+	bra		__break_tlb_miss_common
+
+# step through a DTLB-miss handler from kernel mode
+	.globl		__break_kernel_data_tlb_miss
+__break_kernel_data_tlb_miss:
+	# we'll want to try the trap stub again
+	sethi.p		%hi(__trap_kernel_data_tlb_miss),gr2
+	setlo		%lo(__trap_kernel_data_tlb_miss),gr2
+	movgs		gr2,bpcsr
+	bra		__break_tlb_miss_common
+#endif
+
+###############################################################################
+#
+# handle debug events originating with userspace
+#
+###############################################################################
+__break_maybe_userspace:
+	LEDS		0x3003,gr2
+
+	setlos		#BPSR_BS,gr2
+	andcc		gr3,gr2,gr0,icc0
+	bne		icc0,#0,__break_continue	/* skip if PSR.S was 1 */
+
+	movsg		brr,gr2
+	andicc		gr2,#BRR_ST|BRR_SB,gr0,icc0
+	beq		icc0,#0,__break_continue	/* jump if not BREAK or single-step */
+
+	LEDS		0x3007,gr2
+
+	# do the first part of the exception prologue here
+	sethi.p		%hi(__kernel_frame0_ptr),gr28
+	setlo		%lo(__kernel_frame0_ptr),gr28
+	ldi		@(gr28,#0),gr28
+	andi		gr28,#~7,gr28
+
+	# set up the kernel stack pointer
+	sti		sp  ,@(gr28,#REG_SP)
+	ori		gr28,0,sp
+	sti		gr0 ,@(gr28,#REG_GR(28))
+
+	stdi		gr20,@(gr28,#REG_GR(20))
+	stdi		gr22,@(gr28,#REG_GR(22))
+
+	movsg		tbr,gr20
+	movsg		bpcsr,gr21
+	movsg		psr,gr22
+
+	# determine the exception type and cancel single-stepping mode
+	or		gr0,gr0,gr23
+
+	movsg		dcr,gr2
+	sethi.p		%hi(DCR_SE),gr3
+	setlo		%lo(DCR_SE),gr3
+	andcc		gr2,gr3,gr0,icc0
+	beq		icc0,#0,__break_no_user_sstep	/* must have been a BREAK insn */
+
+	not		gr3,gr3
+	and		gr2,gr3,gr2
+	movgs		gr2,dcr
+	ori		gr23,#REG__STATUS_STEP,gr23
+
+__break_no_user_sstep:
+	LEDS		0x300f,gr2
+
+	movsg		brr,gr2
+	andi		gr2,#BRR_ST|BRR_SB,gr2
+	slli		gr2,#1,gr2
+	or		gr23,gr2,gr23
+	sti.p		gr23,@(gr28,#REG__STATUS)	/* record single step status */
+
+	# adjust the value acquired from TBR - this indicates the exception
+	setlos		#~TBR_TT,gr2
+	and.p		gr20,gr2,gr20
+	setlos		#TBR_TT_BREAK,gr2
+	or.p		gr20,gr2,gr20
+
+	# fudge PSR.PS and BPSR.BS to return to kernel mode through the trap
+	# table as trap 126
+	andi		gr22,#~PSR_PS,gr22		/* PSR.PS should be 0 */
+	movgs		gr22,psr
+
+	setlos		#BPSR_BS,gr2			/* BPSR.BS should be 1 and BPSR.BET 0 */
+	movgs		gr2,bpsr
+
+	# return through remainder of the exception prologue
+	# - need to load gr23 with return handler address
+	sethi.p		%hi(__entry_return_from_user_exception),gr23
+	setlo		%lo(__entry_return_from_user_exception),gr23
+	sethi.p		%hi(__entry_common),gr3
+	setlo		%lo(__entry_common),gr3
+	movgs		gr3,bpcsr
+
+	LEDS		0x301f,gr2
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	lddi.p		@(gr31,#REG_GR(2)),gr2
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+###############################################################################
+#
+# resume normal debug-mode entry
+#
+###############################################################################
+__break_continue:
+	LEDS		0x4003,gr2
+
+	# set up the kernel stack pointer
+	sti		sp,@(gr31,#REG_SP)
+
+	sethi.p		%hi(__break_frame_0),sp
+	setlo		%lo(__break_frame_0),sp
+
+	# finish building the exception frame
+	stdi		gr4 ,@(gr31,#REG_GR(4))
+	stdi		gr6 ,@(gr31,#REG_GR(6))
+	stdi		gr8 ,@(gr31,#REG_GR(8))
+	stdi		gr10,@(gr31,#REG_GR(10))
+	stdi		gr12,@(gr31,#REG_GR(12))
+	stdi		gr14,@(gr31,#REG_GR(14))
+	stdi		gr16,@(gr31,#REG_GR(16))
+	stdi		gr18,@(gr31,#REG_GR(18))
+	stdi		gr20,@(gr31,#REG_GR(20))
+	stdi		gr22,@(gr31,#REG_GR(22))
+	stdi		gr24,@(gr31,#REG_GR(24))
+	stdi		gr26,@(gr31,#REG_GR(26))
+	sti		gr0 ,@(gr31,#REG_GR(28))	/* NULL frame pointer */
+	sti		gr29,@(gr31,#REG_GR(29))
+	sti		gr30,@(gr31,#REG_GR(30))
+	sti		gr8 ,@(gr31,#REG_ORIG_GR8)
+
+#ifdef CONFIG_MMU
+	movsg		scr3,gr19
+	sti		gr19,@(gr31,#REG_GR(31))
+#endif
+
+	movsg		bpsr ,gr19
+	movsg		tbr  ,gr20
+	movsg		bpcsr,gr21
+	movsg		psr  ,gr22
+	movsg		isr  ,gr23
+	movsg		cccr ,gr25
+	movsg		lr   ,gr26
+	movsg		lcr  ,gr27
+
+	andi.p		gr22,#~(PSR_S|PSR_ET),gr5	/* rebuild PSR */
+	andi		gr19,#PSR_ET,gr4
+	or.p		gr4,gr5,gr5
+	srli		gr19,#10,gr4
+	andi		gr4,#PSR_S,gr4
+	or.p		gr4,gr5,gr5
+
+	setlos		#-1,gr6
+	sti		gr20,@(gr31,#REG_TBR)
+	sti		gr21,@(gr31,#REG_PC)
+	sti		gr5 ,@(gr31,#REG_PSR)
+	sti		gr23,@(gr31,#REG_ISR)
+	sti		gr25,@(gr31,#REG_CCCR)
+	stdi		gr26,@(gr31,#REG_LR)
+	sti		gr6 ,@(gr31,#REG_SYSCALLNO)
+
+	# store CPU-specific regs
+	movsg		iacc0h,gr4
+	movsg		iacc0l,gr5
+	stdi		gr4,@(gr31,#REG_IACC0)
+
+	movsg		gner0,gr4
+	movsg		gner1,gr5
+	stdi		gr4,@(gr31,#REG_GNER0)
+
+	# build the debug register frame
+	movsg		brr,gr4
+	movgs		gr0,brr
+	movsg		nmar,gr5
+	movsg		dcr,gr6
+
+	sethi.p		%hi(__debug_status),gr7
+	setlo		%lo(__debug_status),gr7
+
+	stdi		gr4 ,@(gr7,#DEBUG_BRR)
+	sti		gr19,@(gr7,#DEBUG_BPSR)
+	sti.p		gr6 ,@(gr7,#DEBUG_DCR)
+
+	# trap exceptions during break handling and disable h/w breakpoints/watchpoints
+	sethi		%hi(DCR_EBE),gr5
+	setlo.p		%lo(DCR_EBE),gr5
+	sethi		%hi(__entry_breaktrap_table),gr4
+	setlo		%lo(__entry_breaktrap_table),gr4
+	movgs		gr5,dcr
+	movgs		gr4,tbr
+
+	# set up kernel global registers
+	sethi.p		%hi(__kernel_current_task),gr5
+	setlo		%lo(__kernel_current_task),gr5
+	ld		@(gr5,gr0),gr29
+	ldi.p		@(gr29,#4),gr15		; __current_thread_info = current->thread_info
+
+	sethi		%hi(_gp),gr16
+	setlo.p		%lo(_gp),gr16
+
+	# make sure we (the kernel) get div-zero and misalignment exceptions
+	setlos		#ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5
+	movgs		gr5,isr
+
+	# enter the GDB stub
+	LEDS		0x4007,gr2
+
+	or.p		gr0,gr0,fp
+	call		debug_stub
+
+	LEDS		0x403f,gr2
+
+	# return from break
+	lddi		@(gr31,#REG_IACC0),gr4
+	movgs		gr4,iacc0h
+	movgs		gr5,iacc0l
+
+	lddi		@(gr31,#REG_GNER0),gr4
+	movgs		gr4,gner0
+	movgs		gr5,gner1
+
+	lddi		@(gr31,#REG_LR)  ,gr26
+	lddi		@(gr31,#REG_CCR) ,gr24
+	lddi		@(gr31,#REG_PSR) ,gr22
+	ldi		@(gr31,#REG_PC)  ,gr21
+	ldi		@(gr31,#REG_TBR) ,gr20
+
+	sethi.p		%hi(__debug_status),gr6
+	setlo		%lo(__debug_status),gr6
+	ldi.p		@(gr6,#DEBUG_DCR) ,gr6
+
+	andi		gr22,#PSR_S,gr19		/* rebuild BPSR */
+	andi.p		gr22,#PSR_ET,gr5
+	slli		gr19,#10,gr19
+	or		gr5,gr19,gr19
+
+	movgs		gr6 ,dcr
+	movgs		gr19,bpsr
+	movgs		gr20,tbr
+	movgs		gr21,bpcsr
+	movgs		gr23,isr
+	movgs		gr24,ccr
+	movgs		gr25,cccr
+	movgs		gr26,lr
+	movgs		gr27,lcr
+
+	LEDS		0x407f,gr2
+
+#ifdef CONFIG_MMU
+	ldi		@(gr31,#REG_GR(31)),gr2
+	movgs		gr2,scr3
+#endif
+
+	ldi		@(gr31,#REG_GR(30)),gr30
+	ldi		@(gr31,#REG_GR(29)),gr29
+	lddi		@(gr31,#REG_GR(26)),gr26
+	lddi		@(gr31,#REG_GR(24)),gr24
+	lddi		@(gr31,#REG_GR(22)),gr22
+	lddi		@(gr31,#REG_GR(20)),gr20
+	lddi		@(gr31,#REG_GR(18)),gr18
+	lddi		@(gr31,#REG_GR(16)),gr16
+	lddi		@(gr31,#REG_GR(14)),gr14
+	lddi		@(gr31,#REG_GR(12)),gr12
+	lddi		@(gr31,#REG_GR(10)),gr10
+	lddi		@(gr31,#REG_GR(8)) ,gr8
+	lddi		@(gr31,#REG_GR(6)) ,gr6
+	lddi		@(gr31,#REG_GR(4)) ,gr4
+	lddi		@(gr31,#REG_GR(2)) ,gr2
+	ldi.p		@(gr31,#REG_SP)    ,sp
+
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+###################################################################################################
+#
+# GDB stub "system calls"
+#
+###################################################################################################
+
+#ifdef CONFIG_GDBSTUB
+	# void gdbstub_console_write(struct console *con, const char *p, unsigned n)
+	.globl		gdbstub_console_write
+gdbstub_console_write:
+	break
+	bralr
+#endif
+
+	# GDB stub BUG() trap
+	# GR8 is the proposed signal number
+	.globl		__debug_bug_trap
+__debug_bug_trap:
+	break
+	bralr
+
+	# transfer kernel exeception to GDB for handling
+	.globl		__break_hijack_kernel_event
+__break_hijack_kernel_event:
+	break
+	.globl		__break_hijack_kernel_event_breaks_here
+__break_hijack_kernel_event_breaks_here:
+	nop
+
+#ifdef CONFIG_MMU
+	# handle a return from TLB-miss that requires single-step reactivation
+	.globl		__break_tlb_miss_return_break
+__break_tlb_miss_return_break:
+	break
+__break_tlb_miss_return_breaks_here:
+	nop
+#endif
+
+	# guard the first .text label in the next file from confusion
+	nop
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S
new file mode 100644
index 00000000..53deeb5d
--- /dev/null
+++ b/arch/frv/kernel/cmode.S
@@ -0,0 +1,189 @@
+/* cmode.S: clock mode management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Woodhouse (dwmw2@infradead.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/ptrace.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <asm/spr-regs.h>
+
+#define __addr_MASK	0xfeff9820	/* interrupt controller mask */
+
+#define __addr_SDRAMC	0xfe000400	/* SDRAM controller regs */
+#define SDRAMC_DSTS	0x28		/* SDRAM status */
+#define SDRAMC_DSTS_SSI	0x00000001	/* indicates that the SDRAM is in self-refresh mode */
+#define SDRAMC_DRCN	0x30		/* SDRAM refresh control */
+#define SDRAMC_DRCN_SR	0x00000001	/* transition SDRAM into self-refresh mode */
+#define __addr_CLKC	0xfeff9a00
+#define CLKC_SWCMODE	0x00000008
+#define __addr_LEDS	0xe1200004
+
+.macro li v r
+	sethi.p		%hi(\v),\r
+	setlo		%lo(\v),\r
+.endm
+
+	.text
+	.balign		4
+
+
+###############################################################################
+#
+# Change CMODE
+# - void frv_change_cmode(int cmode)
+#
+###############################################################################
+	.globl		frv_change_cmode
+        .type		frv_change_cmode,@function
+
+.macro	LEDS v
+#ifdef DEBUG_CMODE
+	setlos	#~\v,gr10
+	sti	gr10,@(gr11,#0)
+	membar
+#endif
+.endm
+
+frv_change_cmode:
+	movsg		lr,gr9
+#ifdef DEBUG_CMODE
+	li		__addr_LEDS,gr11
+#endif
+	dcef		@(gr0,gr0),#1
+
+	# Shift argument left by 24 bits to fit in SWCMODE register later.
+	slli		gr8,#24,gr8
+
+	# (1) Set '0' in the PSR.ET bit, and prohibit interrupts.
+	movsg		psr,gr14
+	andi		gr14,#~PSR_ET,gr3
+	movgs		gr3,psr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	# (2) Set '0' to all bits of the MASK register of the interrupt
+	#     controller, and mask interrupts.
+	li		__addr_MASK,gr12
+	ldi		@(gr12,#0),gr13
+	li		0xffff0000,gr4
+	sti		gr4,@(gr12,#0)
+#endif
+
+	# (3) Stop the transfer function of DMAC. Stop all the bus masters
+	#     to access SDRAM and the internal resources.
+
+	# (already done by caller)
+
+	# (4) Preload a series of following instructions to the instruction
+	#     cache.
+	li		#__cmode_icache_lock_start,gr3
+	li		#__cmode_icache_lock_end,gr4
+
+1:	icpl		gr3,gr0,#1
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	# Set up addresses in regs for later steps.
+	setlos		SDRAMC_DRCN_SR,gr3
+	li		__addr_SDRAMC,gr4
+	li		__addr_CLKC,gr5
+	ldi		@(gr5,#0),gr6
+	li		#0x80000000,gr7
+	or		gr6,gr7,gr6
+
+	bra		__cmode_icache_lock_start
+
+	.balign	L1_CACHE_BYTES
+__cmode_icache_lock_start:
+
+	# (5) Flush the content of all caches by the DCEF instruction.
+	dcef		@(gr0,gr0),#1
+
+	# (6) Execute loading the dummy for SDRAM.
+	ldi		@(gr9,#0),gr0
+
+	# (7) Set '1' to the DRCN.SR bit, and change SDRAM to the
+	#     self-refresh mode. Execute the dummy load to all memory
+	#     devices set to cacheable on the external bus side in parallel
+	#     with this.
+	sti		gr3,@(gr4,#SDRAMC_DRCN)
+
+	# (8) Execute memory barrier instruction (MEMBAR).
+	membar
+
+	# (9) Read the DSTS register repeatedly until '1' stands in the
+	#     DSTS.SSI field.
+1:	ldi		@(gr4,#SDRAMC_DSTS),gr3
+	andicc		gr3,#SDRAMC_DSTS_SSI,gr3,icc0
+	beq		icc0,#0,1b
+
+	# (10) Execute memory barrier instruction (MEMBAR).
+	membar
+
+#if 1
+	# (11) Set the value of CMODE that you want to change to
+	#      SWCMODE.SWCM[3:0].
+	sti		gr8,@(gr5,#CLKC_SWCMODE)
+
+	# (12) Set '1' to the CLKC.SWEN bit. In that case, do not change
+	#      fields other than SWEN of the CLKC register.
+	sti		gr6,@(gr5,#0)
+#endif
+	# (13) Execute the instruction just after the memory barrier
+	# instruction that executes the self-loop 256 times. (Meanwhile,
+	# the CMODE switch is done.)
+	membar
+	setlos		#256,gr7
+2:	subicc		gr7,#1,gr7,icc0
+	bne		icc0,#2,2b
+
+	LEDS	0x36
+
+	# (14) Release the self-refresh of SDRAM.
+	sti		gr0,@(gr4,#SDRAMC_DRCN)
+
+	# Wait for it...
+3:	ldi		@(gr4,#SDRAMC_DSTS),gr3
+	andicc		gr3,#SDRAMC_DSTS_SSI,gr3,icc0
+	bne		icc0,#2,3b
+
+#if 0
+	li		0x0100000,gr10
+4:	subicc		gr10,#1,gr10,icc0
+
+	bne		icc0,#0,4b
+#endif
+
+__cmode_icache_lock_end:
+
+	li		#__cmode_icache_lock_start,gr3
+	li		#__cmode_icache_lock_end,gr4
+
+4:	icul		gr3
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,4b
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	# (15) Release the interrupt mask setting of the MASK register of
+	# the interrupt controller if necessary.
+	sti		gr13,@(gr12,#0)
+#endif
+	# (16) Set  1' in the PSR.ET bit, and permit interrupt.
+	movgs		gr14,psr
+
+	bralr
+
+	.size		frv_change_cmode, .-frv_change_cmode
diff --git a/arch/frv/kernel/debug-stub.c b/arch/frv/kernel/debug-stub.c
new file mode 100644
index 00000000..a0228f71
--- /dev/null
+++ b/arch/frv/kernel/debug-stub.c
@@ -0,0 +1,258 @@
+/* debug-stub.c: debug-mode stub
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <linux/start_kernel.h>
+
+#include <asm/serial-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/irc-regs.h>
+#include <asm/gdb-stub.h>
+#include "gdb-io.h"
+
+/* CPU board CON5 */
+#define __UART0(X) (*(volatile uint8_t *)(UART0_BASE + (UART_##X)))
+
+#define LSR_WAIT_FOR0(STATE)			\
+do {						\
+} while (!(__UART0(LSR) & UART_LSR_##STATE))
+
+#define FLOWCTL_QUERY0(LINE)	({ __UART0(MSR) & UART_MSR_##LINE; })
+#define FLOWCTL_CLEAR0(LINE)	do { __UART0(MCR) &= ~UART_MCR_##LINE; } while (0)
+#define FLOWCTL_SET0(LINE)	do { __UART0(MCR) |= UART_MCR_##LINE; } while (0)
+
+#define FLOWCTL_WAIT_FOR0(LINE)			\
+do {						\
+	gdbstub_do_rx();			\
+} while(!FLOWCTL_QUERY(LINE))
+
+struct frv_debug_status __debug_status;
+
+static void __init debug_stub_init(void);
+
+/*****************************************************************************/
+/*
+ * debug mode handler stub
+ * - we come here with the CPU in debug mode and with exceptions disabled
+ * - handle debugging services for userspace
+ */
+asmlinkage void debug_stub(void)
+{
+	unsigned long hsr0;
+	int type = 0;
+
+	static u8 inited = 0;
+	if (!inited) {
+		debug_stub_init();
+		type = -1;
+		inited = 1;
+	}
+
+	hsr0 = __get_HSR(0);
+	if (hsr0 & HSR0_ETMD)
+		__set_HSR(0, hsr0 & ~HSR0_ETMD);
+
+	/* disable single stepping */
+	__debug_status.dcr &= ~DCR_SE;
+
+	/* kernel mode can propose an exception be handled in debug mode by jumping to a special
+	 * location */
+	if (__debug_frame->pc == (unsigned long) __break_hijack_kernel_event_breaks_here) {
+		/* replace the debug frame with the kernel frame and discard
+		 * the top kernel context */
+		*__debug_frame = *__frame;
+		__frame = __debug_frame->next_frame;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
+	}
+
+	if (__debug_frame->pc == (unsigned long) __debug_bug_trap + 4) {
+		__debug_frame->pc = __debug_frame->lr;
+		type = __debug_frame->gr8;
+	}
+
+#ifdef CONFIG_GDBSTUB
+	gdbstub(type);
+#endif
+
+	if (hsr0 & HSR0_ETMD)
+		__set_HSR(0, __get_HSR(0) | HSR0_ETMD);
+
+} /* end debug_stub() */
+
+/*****************************************************************************/
+/*
+ * debug stub initialisation
+ */
+static void __init debug_stub_init(void)
+{
+	__set_IRR(6, 0xff000000);	/* map ERRs to NMI */
+	__set_IITMR(1, 0x20000000);	/* ERR0/1, UART0/1 IRQ detect levels */
+
+	asm volatile("	movgs	gr0,ibar0	\n"
+		     "	movgs	gr0,ibar1	\n"
+		     "	movgs	gr0,ibar2	\n"
+		     "	movgs	gr0,ibar3	\n"
+		     "	movgs	gr0,dbar0	\n"
+		     "	movgs	gr0,dbmr00	\n"
+		     "	movgs	gr0,dbmr01	\n"
+		     "	movgs	gr0,dbdr00	\n"
+		     "	movgs	gr0,dbdr01	\n"
+		     "	movgs	gr0,dbar1	\n"
+		     "	movgs	gr0,dbmr10	\n"
+		     "	movgs	gr0,dbmr11	\n"
+		     "	movgs	gr0,dbdr10	\n"
+		     "	movgs	gr0,dbdr11	\n"
+		     );
+
+	/* deal with debugging stub initialisation and initial pause */
+	if (__debug_frame->pc == (unsigned long) __debug_stub_init_break)
+		__debug_frame->pc = (unsigned long) start_kernel;
+
+	/* enable the debug events we want to trap */
+	__debug_status.dcr = DCR_EBE;
+
+#ifdef CONFIG_GDBSTUB
+	gdbstub_init();
+#endif
+
+	__clr_MASK_all();
+	__clr_MASK(15);
+	__clr_RC(15);
+
+} /* end debug_stub_init() */
+
+/*****************************************************************************/
+/*
+ * kernel "exit" trap for gdb stub
+ */
+void debug_stub_exit(int status)
+{
+
+#ifdef CONFIG_GDBSTUB
+	gdbstub_exit(status);
+#endif
+
+} /* end debug_stub_exit() */
+
+/*****************************************************************************/
+/*
+ * send string to serial port
+ */
+void debug_to_serial(const char *p, int n)
+{
+	char ch;
+
+	for (; n > 0; n--) {
+		ch = *p++;
+		FLOWCTL_SET0(DTR);
+		LSR_WAIT_FOR0(THRE);
+		// FLOWCTL_WAIT_FOR(CTS);
+
+		if (ch == 0x0a) {
+			__UART0(TX) = 0x0d;
+			mb();
+			LSR_WAIT_FOR0(THRE);
+			// FLOWCTL_WAIT_FOR(CTS);
+		}
+		__UART0(TX) = ch;
+		mb();
+
+		FLOWCTL_CLEAR0(DTR);
+	}
+
+} /* end debug_to_serial() */
+
+/*****************************************************************************/
+/*
+ * send string to serial port
+ */
+void debug_to_serial2(const char *fmt, ...)
+{
+	va_list va;
+	char buf[64];
+	int n;
+
+	va_start(va, fmt);
+	n = vsprintf(buf, fmt, va);
+	va_end(va);
+
+	debug_to_serial(buf, n);
+
+} /* end debug_to_serial2() */
+
+/*****************************************************************************/
+/*
+ * set up the ttyS0 serial port baud rate timers
+ */
+void __init console_set_baud(unsigned baud)
+{
+	unsigned value, high, low;
+	u8 lcr;
+
+	/* work out the divisor to give us the nearest higher baud rate */
+	value = __serial_clock_speed_HZ / 16 / baud;
+
+	/* determine the baud rate range */
+	high = __serial_clock_speed_HZ / 16 / value;
+	low = __serial_clock_speed_HZ / 16 / (value + 1);
+
+	/* pick the nearest bound */
+	if (low + (high - low) / 2 > baud)
+		value++;
+
+	lcr = __UART0(LCR);
+	__UART0(LCR) |= UART_LCR_DLAB;
+	mb();
+	__UART0(DLL) = value & 0xff;
+	__UART0(DLM) = (value >> 8) & 0xff;
+	mb();
+	__UART0(LCR) = lcr;
+	mb();
+
+} /* end console_set_baud() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+int __init console_get_baud(void)
+{
+	unsigned value;
+	u8 lcr;
+
+	lcr = __UART0(LCR);
+	__UART0(LCR) |= UART_LCR_DLAB;
+	mb();
+	value =  __UART0(DLM) << 8;
+	value |= __UART0(DLL);
+	__UART0(LCR) = lcr;
+	mb();
+
+	return value;
+} /* end console_get_baud() */
+
+/*****************************************************************************/
+/*
+ * display BUG() info
+ */
+#ifndef CONFIG_NO_KERNEL_MSG
+void __debug_bug_printk(const char *file, unsigned line)
+{
+	printk("kernel BUG at %s:%d!\n", file, line);
+
+} /* end __debug_bug_printk() */
+#endif
diff --git a/arch/frv/kernel/dma.c b/arch/frv/kernel/dma.c
new file mode 100644
index 00000000..156184e1
--- /dev/null
+++ b/arch/frv/kernel/dma.c
@@ -0,0 +1,463 @@
+/* dma.c: DMA controller management on FR401 and the like
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/dma.h>
+#include <asm/gpio-regs.h>
+#include <asm/irc-regs.h>
+#include <asm/cpu-irqs.h>
+
+struct frv_dma_channel {
+	uint8_t			flags;
+#define FRV_DMA_FLAGS_RESERVED	0x01
+#define FRV_DMA_FLAGS_INUSE	0x02
+#define FRV_DMA_FLAGS_PAUSED	0x04
+	uint8_t			cap;		/* capabilities available */
+	int			irq;		/* completion IRQ */
+	uint32_t		dreqbit;
+	uint32_t		dackbit;
+	uint32_t		donebit;
+	const unsigned long	ioaddr;		/* DMA controller regs addr */
+	const char		*devname;
+	dma_irq_handler_t	handler;
+	void			*data;
+};
+
+
+#define __get_DMAC(IO,X)	({ *(volatile unsigned long *)((IO) + DMAC_##X##x); })
+
+#define __set_DMAC(IO,X,V)					\
+do {								\
+	*(volatile unsigned long *)((IO) + DMAC_##X##x) = (V);	\
+	mb();							\
+} while(0)
+
+#define ___set_DMAC(IO,X,V)					\
+do {								\
+	*(volatile unsigned long *)((IO) + DMAC_##X##x) = (V);	\
+} while(0)
+
+
+static struct frv_dma_channel frv_dma_channels[FRV_DMA_NCHANS] = {
+	[0] = {
+		.cap		= FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK | FRV_DMA_CAP_DONE,
+		.irq		= IRQ_CPU_DMA0,
+		.dreqbit	= SIR_DREQ0_INPUT,
+		.dackbit	= SOR_DACK0_OUTPUT,
+		.donebit	= SOR_DONE0_OUTPUT,
+		.ioaddr		= 0xfe000900,
+	},
+	[1] = {
+		.cap		= FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK | FRV_DMA_CAP_DONE,
+		.irq		= IRQ_CPU_DMA1,
+		.dreqbit	= SIR_DREQ1_INPUT,
+		.dackbit	= SOR_DACK1_OUTPUT,
+		.donebit	= SOR_DONE1_OUTPUT,
+		.ioaddr		= 0xfe000980,
+	},
+	[2] = {
+		.cap		= FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK,
+		.irq		= IRQ_CPU_DMA2,
+		.dreqbit	= SIR_DREQ2_INPUT,
+		.dackbit	= SOR_DACK2_OUTPUT,
+		.ioaddr		= 0xfe000a00,
+	},
+	[3] = {
+		.cap		= FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK,
+		.irq		= IRQ_CPU_DMA3,
+		.dreqbit	= SIR_DREQ3_INPUT,
+		.dackbit	= SOR_DACK3_OUTPUT,
+		.ioaddr		= 0xfe000a80,
+	},
+	[4] = {
+		.cap		= FRV_DMA_CAP_DREQ,
+		.irq		= IRQ_CPU_DMA4,
+		.dreqbit	= SIR_DREQ4_INPUT,
+		.ioaddr		= 0xfe001000,
+	},
+	[5] = {
+		.cap		= FRV_DMA_CAP_DREQ,
+		.irq		= IRQ_CPU_DMA5,
+		.dreqbit	= SIR_DREQ5_INPUT,
+		.ioaddr		= 0xfe001080,
+	},
+	[6] = {
+		.cap		= FRV_DMA_CAP_DREQ,
+		.irq		= IRQ_CPU_DMA6,
+		.dreqbit	= SIR_DREQ6_INPUT,
+		.ioaddr		= 0xfe001100,
+	},
+	[7] = {
+		.cap		= FRV_DMA_CAP_DREQ,
+		.irq		= IRQ_CPU_DMA7,
+		.dreqbit	= SIR_DREQ7_INPUT,
+		.ioaddr		= 0xfe001180,
+	},
+};
+
+static DEFINE_RWLOCK(frv_dma_channels_lock);
+
+unsigned long frv_dma_inprogress;
+
+#define frv_clear_dma_inprogress(channel) \
+	atomic_clear_mask(1 << (channel), &frv_dma_inprogress);
+
+#define frv_set_dma_inprogress(channel) \
+	atomic_set_mask(1 << (channel), &frv_dma_inprogress);
+
+/*****************************************************************************/
+/*
+ * DMA irq handler - determine channel involved, grab status and call real handler
+ */
+static irqreturn_t dma_irq_handler(int irq, void *_channel)
+{
+	struct frv_dma_channel *channel = _channel;
+
+	frv_clear_dma_inprogress(channel - frv_dma_channels);
+	return channel->handler(channel - frv_dma_channels,
+				__get_DMAC(channel->ioaddr, CSTR),
+				channel->data);
+
+} /* end dma_irq_handler() */
+
+/*****************************************************************************/
+/*
+ * Determine which DMA controllers are present on this CPU
+ */
+void __init frv_dma_init(void)
+{
+	unsigned long psr = __get_PSR();
+	int num_dma, i;
+
+	/* First, determine how many DMA channels are available */
+	switch (PSR_IMPLE(psr)) {
+	case PSR_IMPLE_FR405:
+	case PSR_IMPLE_FR451:
+	case PSR_IMPLE_FR501:
+	case PSR_IMPLE_FR551:
+		num_dma = FRV_DMA_8CHANS;
+		break;
+
+	case PSR_IMPLE_FR401:
+	default:
+		num_dma = FRV_DMA_4CHANS;
+		break;
+	}
+
+	/* Now mark all of the non-existent channels as reserved */
+	for(i = num_dma; i < FRV_DMA_NCHANS; i++)
+		frv_dma_channels[i].flags = FRV_DMA_FLAGS_RESERVED;
+
+} /* end frv_dma_init() */
+
+/*****************************************************************************/
+/*
+ * allocate a DMA controller channel and the IRQ associated with it
+ */
+int frv_dma_open(const char *devname,
+		 unsigned long dmamask,
+		 int dmacap,
+		 dma_irq_handler_t handler,
+		 unsigned long irq_flags,
+		 void *data)
+{
+	struct frv_dma_channel *channel;
+	int dma, ret;
+	uint32_t val;
+
+	write_lock(&frv_dma_channels_lock);
+
+	ret = -ENOSPC;
+
+	for (dma = FRV_DMA_NCHANS - 1; dma >= 0; dma--) {
+		channel = &frv_dma_channels[dma];
+
+		if (!test_bit(dma, &dmamask))
+			continue;
+
+		if ((channel->cap & dmacap) != dmacap)
+			continue;
+
+		if (!frv_dma_channels[dma].flags)
+			goto found;
+	}
+
+	goto out;
+
+ found:
+	ret = request_irq(channel->irq, dma_irq_handler, irq_flags, devname, channel);
+	if (ret < 0)
+		goto out;
+
+	/* okay, we've allocated all the resources */
+	channel = &frv_dma_channels[dma];
+
+	channel->flags		|= FRV_DMA_FLAGS_INUSE;
+	channel->devname	= devname;
+	channel->handler	= handler;
+	channel->data		= data;
+
+	/* Now make sure we are set up for DMA and not GPIO */
+	/* SIR bit must be set for DMA to work */
+	__set_SIR(channel->dreqbit | __get_SIR());
+	/* SOR bits depend on what the caller requests */
+	val = __get_SOR();
+	if(dmacap & FRV_DMA_CAP_DACK)
+		val |= channel->dackbit;
+	else
+		val &= ~channel->dackbit;
+	if(dmacap & FRV_DMA_CAP_DONE)
+		val |= channel->donebit;
+	else
+		val &= ~channel->donebit;
+	__set_SOR(val);
+
+	ret = dma;
+ out:
+	write_unlock(&frv_dma_channels_lock);
+	return ret;
+} /* end frv_dma_open() */
+
+EXPORT_SYMBOL(frv_dma_open);
+
+/*****************************************************************************/
+/*
+ * close a DMA channel and its associated interrupt
+ */
+void frv_dma_close(int dma)
+{
+	struct frv_dma_channel *channel = &frv_dma_channels[dma];
+	unsigned long flags;
+
+	write_lock_irqsave(&frv_dma_channels_lock, flags);
+
+	free_irq(channel->irq, channel);
+	frv_dma_stop(dma);
+
+	channel->flags &= ~FRV_DMA_FLAGS_INUSE;
+
+	write_unlock_irqrestore(&frv_dma_channels_lock, flags);
+} /* end frv_dma_close() */
+
+EXPORT_SYMBOL(frv_dma_close);
+
+/*****************************************************************************/
+/*
+ * set static configuration on a DMA channel
+ */
+void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+
+	___set_DMAC(ioaddr, CCFR, ccfr);
+	___set_DMAC(ioaddr, CCTR, cctr);
+	___set_DMAC(ioaddr, APR,  apr);
+	mb();
+
+} /* end frv_dma_config() */
+
+EXPORT_SYMBOL(frv_dma_config);
+
+/*****************************************************************************/
+/*
+ * start a DMA channel
+ */
+void frv_dma_start(int dma,
+		   unsigned long sba, unsigned long dba,
+		   unsigned long pix, unsigned long six, unsigned long bcl)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+
+	___set_DMAC(ioaddr, SBA,  sba);
+	___set_DMAC(ioaddr, DBA,  dba);
+	___set_DMAC(ioaddr, PIX,  pix);
+	___set_DMAC(ioaddr, SIX,  six);
+	___set_DMAC(ioaddr, BCL,  bcl);
+	___set_DMAC(ioaddr, CSTR, 0);
+	mb();
+
+	__set_DMAC(ioaddr, CCTR, __get_DMAC(ioaddr, CCTR) | DMAC_CCTRx_ACT);
+	frv_set_dma_inprogress(dma);
+
+} /* end frv_dma_start() */
+
+EXPORT_SYMBOL(frv_dma_start);
+
+/*****************************************************************************/
+/*
+ * restart a DMA channel that's been stopped in circular addressing mode by comparison-end
+ */
+void frv_dma_restart_circular(int dma, unsigned long six)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+
+	___set_DMAC(ioaddr, SIX,  six);
+	___set_DMAC(ioaddr, CSTR, __get_DMAC(ioaddr, CSTR) & ~DMAC_CSTRx_CE);
+	mb();
+
+	__set_DMAC(ioaddr, CCTR, __get_DMAC(ioaddr, CCTR) | DMAC_CCTRx_ACT);
+	frv_set_dma_inprogress(dma);
+
+} /* end frv_dma_restart_circular() */
+
+EXPORT_SYMBOL(frv_dma_restart_circular);
+
+/*****************************************************************************/
+/*
+ * stop a DMA channel
+ */
+void frv_dma_stop(int dma)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+	uint32_t cctr;
+
+	___set_DMAC(ioaddr, CSTR, 0);
+	cctr = __get_DMAC(ioaddr, CCTR);
+	cctr &= ~(DMAC_CCTRx_IE | DMAC_CCTRx_ACT);
+	cctr |= DMAC_CCTRx_FC; 	/* fifo clear */
+	__set_DMAC(ioaddr, CCTR, cctr);
+	__set_DMAC(ioaddr, BCL,  0);
+	frv_clear_dma_inprogress(dma);
+} /* end frv_dma_stop() */
+
+EXPORT_SYMBOL(frv_dma_stop);
+
+/*****************************************************************************/
+/*
+ * test interrupt status of DMA channel
+ */
+int is_frv_dma_interrupting(int dma)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+
+	return __get_DMAC(ioaddr, CSTR) & (1 << 23);
+
+} /* end is_frv_dma_interrupting() */
+
+EXPORT_SYMBOL(is_frv_dma_interrupting);
+
+/*****************************************************************************/
+/*
+ * dump data about a DMA channel
+ */
+void frv_dma_dump(int dma)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+	unsigned long cstr, pix, six, bcl;
+
+	cstr = __get_DMAC(ioaddr, CSTR);
+	pix  = __get_DMAC(ioaddr, PIX);
+	six  = __get_DMAC(ioaddr, SIX);
+	bcl  = __get_DMAC(ioaddr, BCL);
+
+	printk("DMA[%d] cstr=%lx pix=%lx six=%lx bcl=%lx\n", dma, cstr, pix, six, bcl);
+
+} /* end frv_dma_dump() */
+
+EXPORT_SYMBOL(frv_dma_dump);
+
+/*****************************************************************************/
+/*
+ * pause all DMA controllers
+ * - called by clock mangling routines
+ * - caller must be holding interrupts disabled
+ */
+void frv_dma_pause_all(void)
+{
+	struct frv_dma_channel *channel;
+	unsigned long ioaddr;
+	unsigned long cstr, cctr;
+	int dma;
+
+	write_lock(&frv_dma_channels_lock);
+
+	for (dma = FRV_DMA_NCHANS - 1; dma >= 0; dma--) {
+		channel = &frv_dma_channels[dma];
+
+		if (!(channel->flags & FRV_DMA_FLAGS_INUSE))
+			continue;
+
+		ioaddr = channel->ioaddr;
+		cctr = __get_DMAC(ioaddr, CCTR);
+		if (cctr & DMAC_CCTRx_ACT) {
+			cctr &= ~DMAC_CCTRx_ACT;
+			__set_DMAC(ioaddr, CCTR, cctr);
+
+			do {
+				cstr = __get_DMAC(ioaddr, CSTR);
+			} while (cstr & DMAC_CSTRx_BUSY);
+
+			if (cstr & DMAC_CSTRx_FED)
+				channel->flags |= FRV_DMA_FLAGS_PAUSED;
+			frv_clear_dma_inprogress(dma);
+		}
+	}
+
+} /* end frv_dma_pause_all() */
+
+EXPORT_SYMBOL(frv_dma_pause_all);
+
+/*****************************************************************************/
+/*
+ * resume paused DMA controllers
+ * - called by clock mangling routines
+ * - caller must be holding interrupts disabled
+ */
+void frv_dma_resume_all(void)
+{
+	struct frv_dma_channel *channel;
+	unsigned long ioaddr;
+	unsigned long cstr, cctr;
+	int dma;
+
+	for (dma = FRV_DMA_NCHANS - 1; dma >= 0; dma--) {
+		channel = &frv_dma_channels[dma];
+
+		if (!(channel->flags & FRV_DMA_FLAGS_PAUSED))
+			continue;
+
+		ioaddr = channel->ioaddr;
+		cstr = __get_DMAC(ioaddr, CSTR);
+		cstr &= ~(DMAC_CSTRx_FED | DMAC_CSTRx_INT);
+		__set_DMAC(ioaddr, CSTR, cstr);
+
+		cctr = __get_DMAC(ioaddr, CCTR);
+		cctr |= DMAC_CCTRx_ACT;
+		__set_DMAC(ioaddr, CCTR, cctr);
+
+		channel->flags &= ~FRV_DMA_FLAGS_PAUSED;
+		frv_set_dma_inprogress(dma);
+	}
+
+	write_unlock(&frv_dma_channels_lock);
+
+} /* end frv_dma_resume_all() */
+
+EXPORT_SYMBOL(frv_dma_resume_all);
+
+/*****************************************************************************/
+/*
+ * dma status clear
+ */
+void frv_dma_status_clear(int dma)
+{
+	unsigned long ioaddr = frv_dma_channels[dma].ioaddr;
+	uint32_t cctr;
+	___set_DMAC(ioaddr, CSTR, 0);
+
+	cctr = __get_DMAC(ioaddr, CCTR);
+} /* end frv_dma_status_clear() */
+
+EXPORT_SYMBOL(frv_dma_status_clear);
diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S
new file mode 100644
index 00000000..06c5ae19
--- /dev/null
+++ b/arch/frv/kernel/entry-table.S
@@ -0,0 +1,329 @@
+/* entry-table.S: main trap vector tables and exception jump table
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/spr-regs.h>
+
+###############################################################################
+#
+# Declare the main trap and vector tables
+#
+# There are six tables:
+#
+# (1) The trap table for debug mode
+# (2) The trap table for kernel mode
+# (3) The trap table for user mode
+#
+#     The CPU jumps to an appropriate slot in the appropriate table to perform
+#     exception processing. We have three different tables for the three
+#     different CPU modes because there is no hardware differentiation between
+#     stack pointers for these three modes, and so we have to invent one when
+#     crossing mode boundaries.
+#
+# (4) The exception handler vector table
+#
+#     The user and kernel trap tables use the same prologue for normal
+#     exception processing. The prologue then jumps to the handler in this
+#     table, as indexed by the exception ID from the TBR.
+#
+# (5) The fixup table for kernel-trap single-step
+# (6) The fixup table for user-trap single-step
+#
+#     Due to the way single-stepping works on this CPU (single-step is not
+#     disabled when crossing exception boundaries, only when in debug mode),
+#     we have to catch the single-step event in break.S and jump to the fixup
+#     routine pointed to by this table.
+#
+# The linker script places the user mode and kernel mode trap tables on to
+# the same 8Kb page, so that break.S can be more efficient when performing
+# single-step bypass management
+#
+###############################################################################
+
+	# trap table for entry from debug mode
+	.section	.trap.break,"ax"
+	.balign		256*16
+	.globl		__entry_breaktrap_table
+__entry_breaktrap_table:
+
+	# trap table for entry from user mode
+	.section	.trap.user,"ax"
+	.balign		256*16
+	.globl		__entry_usertrap_table
+__entry_usertrap_table:
+
+	# trap table for entry from kernel mode
+	.section	.trap.kernel,"ax"
+	.balign		256*16
+	.globl		__entry_kerneltrap_table
+__entry_kerneltrap_table:
+
+	# exception handler jump table
+	.section	.trap.vector,"ax"
+	.balign		256*4
+	.globl		__entry_vector_table
+__entry_vector_table:
+
+	# trap fixup table for single-stepping in user mode
+	.section	.trap.fixup.user,"a"
+	.balign		256*4
+	.globl		__break_usertrap_fixup_table
+__break_usertrap_fixup_table:
+
+	# trap fixup table for single-stepping in user mode
+	.section	.trap.fixup.kernel,"a"
+	.balign		256*4
+	.globl		__break_kerneltrap_fixup_table
+__break_kerneltrap_fixup_table:
+
+	# handler declaration for a software or program interrupt
+.macro VECTOR_SOFTPROG tbr_tt, vec
+	.section .trap.user
+	.org		\tbr_tt
+	bra		__entry_uspace_softprog_interrupt
+	.section .trap.fixup.user
+	.org		\tbr_tt >> 2
+	.long		__break_step_uspace_softprog_interrupt
+	.section .trap.kernel
+	.org		\tbr_tt
+	bra		__entry_kernel_softprog_interrupt
+	.section .trap.fixup.kernel
+	.org		\tbr_tt >> 2
+	.long		__break_step_kernel_softprog_interrupt
+	.section .trap.vector
+	.org		\tbr_tt >> 2
+	.long		\vec
+.endm
+
+	# handler declaration for a maskable external interrupt
+.macro VECTOR_IRQ tbr_tt, vec
+	.section .trap.user
+	.org		\tbr_tt
+	bra		__entry_uspace_external_interrupt
+	.section .trap.fixup.user
+	.org		\tbr_tt >> 2
+	.long		__break_step_uspace_external_interrupt
+	.section .trap.kernel
+	.org		\tbr_tt
+	# deal with virtual interrupt disablement
+	beq		icc2,#0,__entry_kernel_external_interrupt_virtually_disabled
+	bra		__entry_kernel_external_interrupt
+	.section .trap.fixup.kernel
+	.org		\tbr_tt >> 2
+	.long		__break_step_kernel_external_interrupt
+	.section .trap.vector
+	.org		\tbr_tt >> 2
+	.long		\vec
+.endm
+
+	# handler declaration for an NMI external interrupt
+.macro VECTOR_NMI tbr_tt, vec
+	.section .trap.user
+	.org		\tbr_tt
+	break
+	break
+	break
+	break
+	.section .trap.kernel
+	.org		\tbr_tt
+	break
+	break
+	break
+	break
+	.section .trap.vector
+	.org		\tbr_tt >> 2
+	.long		\vec
+.endm
+
+	# handler declaration for an MMU only software or program interrupt
+.macro VECTOR_SP_MMU tbr_tt, vec
+#ifdef CONFIG_MMU
+ 	VECTOR_SOFTPROG	\tbr_tt, \vec
+#else
+	VECTOR_NMI	\tbr_tt, 0
+#endif
+.endm
+
+
+###############################################################################
+#
+# specification of the vectors
+# - note: each macro inserts code into multiple sections
+#
+###############################################################################
+	VECTOR_SP_MMU	TBR_TT_INSTR_MMU_MISS,	__entry_insn_mmu_miss
+	VECTOR_SOFTPROG	TBR_TT_INSTR_ACC_ERROR,	__entry_insn_access_error
+	VECTOR_SOFTPROG	TBR_TT_INSTR_ACC_EXCEP,	__entry_insn_access_exception
+	VECTOR_SOFTPROG	TBR_TT_PRIV_INSTR,	__entry_privileged_instruction
+	VECTOR_SOFTPROG	TBR_TT_ILLEGAL_INSTR,	__entry_illegal_instruction
+	VECTOR_SOFTPROG	TBR_TT_FP_EXCEPTION,	__entry_media_exception
+	VECTOR_SOFTPROG	TBR_TT_MP_EXCEPTION,	__entry_media_exception
+	VECTOR_SOFTPROG	TBR_TT_DATA_ACC_ERROR,	__entry_data_access_error
+	VECTOR_SP_MMU	TBR_TT_DATA_MMU_MISS,	__entry_data_mmu_miss
+	VECTOR_SOFTPROG	TBR_TT_DATA_ACC_EXCEP,	__entry_data_access_exception
+	VECTOR_SOFTPROG	TBR_TT_DATA_STR_ERROR,	__entry_data_store_error
+	VECTOR_SOFTPROG	TBR_TT_DIVISION_EXCEP,	__entry_division_exception
+
+#ifdef CONFIG_MMU
+	.section .trap.user
+	.org		TBR_TT_INSTR_TLB_MISS
+	.globl		__trap_user_insn_tlb_miss
+__trap_user_insn_tlb_miss:
+	movsg		ear0,gr28			/* faulting address */
+	movsg		scr0,gr31			/* get mapped PTD coverage start address */
+	xor.p		gr28,gr31,gr31			/* compare addresses */
+	bra		__entry_user_insn_tlb_miss
+
+	.org		TBR_TT_DATA_TLB_MISS
+	.globl		__trap_user_data_tlb_miss
+__trap_user_data_tlb_miss:
+	movsg		ear0,gr28			/* faulting address */
+	movsg		scr1,gr31			/* get mapped PTD coverage start address */
+	xor.p		gr28,gr31,gr31			/* compare addresses */
+	bra		__entry_user_data_tlb_miss
+
+	.section .trap.kernel
+	.org		TBR_TT_INSTR_TLB_MISS
+	.globl		__trap_kernel_insn_tlb_miss
+__trap_kernel_insn_tlb_miss:
+	movsg		ear0,gr29			/* faulting address */
+	movsg		scr0,gr31			/* get mapped PTD coverage start address */
+	xor.p		gr29,gr31,gr31			/* compare addresses */
+	bra		__entry_kernel_insn_tlb_miss
+
+	.org		TBR_TT_DATA_TLB_MISS
+	.globl		__trap_kernel_data_tlb_miss
+__trap_kernel_data_tlb_miss:
+	movsg		ear0,gr29			/* faulting address */
+	movsg		scr1,gr31			/* get mapped PTD coverage start address */
+	xor.p		gr29,gr31,gr31			/* compare addresses */
+	bra		__entry_kernel_data_tlb_miss
+
+	.section .trap.fixup.user
+	.org		TBR_TT_INSTR_TLB_MISS >> 2
+	.globl		__trap_fixup_user_insn_tlb_miss
+__trap_fixup_user_insn_tlb_miss:
+	.long		__break_user_insn_tlb_miss
+	.org		TBR_TT_DATA_TLB_MISS >> 2
+	.globl		__trap_fixup_user_data_tlb_miss
+__trap_fixup_user_data_tlb_miss:
+	.long		__break_user_data_tlb_miss
+
+	.section .trap.fixup.kernel
+	.org		TBR_TT_INSTR_TLB_MISS >> 2
+	.globl		__trap_fixup_kernel_insn_tlb_miss
+__trap_fixup_kernel_insn_tlb_miss:
+	.long		__break_kernel_insn_tlb_miss
+	.org		TBR_TT_DATA_TLB_MISS >> 2
+	.globl		__trap_fixup_kernel_data_tlb_miss
+__trap_fixup_kernel_data_tlb_miss:
+	.long		__break_kernel_data_tlb_miss
+
+	.section .trap.vector
+	.org		TBR_TT_INSTR_TLB_MISS >> 2
+	.long		__entry_insn_mmu_fault
+	.org		TBR_TT_DATA_TLB_MISS >> 2
+	.long		__entry_data_mmu_fault
+#endif
+
+	VECTOR_SP_MMU	TBR_TT_DATA_DAT_EXCEP,	__entry_data_dat_fault
+	VECTOR_NMI	TBR_TT_DECREMENT_TIMER,	__entry_do_NMI
+	VECTOR_SOFTPROG	TBR_TT_COMPOUND_EXCEP,	__entry_compound_exception
+	VECTOR_IRQ	TBR_TT_INTERRUPT_1,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_2,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_3,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_4,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_5,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_6,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_7,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_8,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_9,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_10,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_11,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_12,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_13,	__entry_do_IRQ
+	VECTOR_IRQ	TBR_TT_INTERRUPT_14,	__entry_do_IRQ
+	VECTOR_NMI	TBR_TT_INTERRUPT_15,	__entry_do_NMI
+
+	# miscellaneous user mode entry points
+	.section	.trap.user
+	.org		TBR_TT_TRAP0
+	.rept		127
+	bra		__entry_uspace_softprog_interrupt
+	.long		0,0,0
+	.endr
+	.org		TBR_TT_BREAK
+	bra		__entry_break
+	.long		0,0,0
+
+	.section	.trap.fixup.user
+	.org		TBR_TT_TRAP0 >> 2
+	.rept		127
+	.long		__break_step_uspace_softprog_interrupt
+	.endr
+	.org		TBR_TT_BREAK >> 2
+	.long		0
+
+	# miscellaneous kernel mode entry points
+	.section	.trap.kernel
+	.org		TBR_TT_TRAP0
+	bra		__entry_kernel_softprog_interrupt
+	.org		TBR_TT_TRAP1
+	bra		__entry_kernel_softprog_interrupt
+
+	# trap #2 in kernel - reenable interrupts
+	.org		TBR_TT_TRAP2
+	bra		__entry_kernel_external_interrupt_virtual_reenable
+
+	# miscellaneous kernel traps
+	.org		TBR_TT_TRAP3
+	.rept		124
+	bra		__entry_kernel_softprog_interrupt
+	.long		0,0,0
+	.endr
+	.org		TBR_TT_BREAK
+	bra		__entry_break
+	.long		0,0,0
+
+	.section	.trap.fixup.kernel
+	.org		TBR_TT_TRAP0 >> 2
+	.long		__break_step_kernel_softprog_interrupt
+	.long		__break_step_kernel_softprog_interrupt
+	.long		__break_step_kernel_external_interrupt_virtual_reenable
+	.rept		124
+	.long		__break_step_kernel_softprog_interrupt
+	.endr
+	.org		TBR_TT_BREAK >> 2
+	.long		0
+
+	# miscellaneous debug mode entry points
+	.section	.trap.break
+	.org		TBR_TT_BREAK
+	movsg		bpcsr,gr30
+	jmpl		@(gr30,gr0)
+
+	# miscellaneous vectors
+	.section	.trap.vector
+	.org		TBR_TT_TRAP0 >> 2
+	.long		system_call
+	.rept		119
+	.long		__entry_unsupported_trap
+	.endr
+
+	# userspace atomic op emulation, traps 120-126
+	.rept		7
+	.long		__entry_atomic_op
+	.endr
+	
+	.org		TBR_TT_BREAK >> 2
+	.long		__entry_debug_exception
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
new file mode 100644
index 00000000..5ba23f71
--- /dev/null
+++ b/arch/frv/kernel/entry.S
@@ -0,0 +1,1531 @@
+/* entry.S: FR-V entry
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Entry to the kernel is "interesting":
+ *  (1) There are no stack pointers, not even for the kernel
+ *  (2) General Registers should not be clobbered
+ *  (3) There are no kernel-only data registers
+ *  (4) Since all addressing modes are wrt to a General Register, no global
+ *      variables can be reached
+ *
+ * We deal with this by declaring that we shall kill GR28 on entering the
+ * kernel from userspace
+ *
+ * However, since break interrupts can interrupt the CPU even when PSR.ET==0,
+ * they can't rely on GR28 to be anything useful, and so need to clobber a
+ * separate register (GR31). Break interrupts are managed in break.S
+ *
+ * GR29 _is_ saved, and holds the current task pointer globally
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/ptrace.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <asm/spr-regs.h>
+
+#define nr_syscalls ((syscall_table_size)/4)
+
+	.section	.text..entry
+	.balign		4
+
+.macro LEDS val
+#	sethi.p		%hi(0xe1200004),gr30
+#	setlo		%lo(0xe1200004),gr30
+#	setlos		#~\val,gr31
+#	st		gr31,@(gr30,gr0)
+#	sethi.p		%hi(0xffc00100),gr30
+#	setlo		%lo(0xffc00100),gr30
+#	sth		gr0,@(gr30,gr0)
+#	membar
+.endm
+
+.macro LEDS32
+#	not		gr31,gr31
+#	sethi.p		%hi(0xe1200004),gr30
+#	setlo		%lo(0xe1200004),gr30
+#	st.p		gr31,@(gr30,gr0)
+#	srli		gr31,#16,gr31
+#	sethi.p		%hi(0xffc00100),gr30
+#	setlo		%lo(0xffc00100),gr30
+#	sth		gr31,@(gr30,gr0)
+#	membar
+.endm
+
+###############################################################################
+#
+# entry point for External interrupts received whilst executing userspace code
+#
+###############################################################################
+	.globl		__entry_uspace_external_interrupt
+        .type		__entry_uspace_external_interrupt,@function
+__entry_uspace_external_interrupt:
+	LEDS		0x6200
+	sethi.p		%hi(__kernel_frame0_ptr),gr28
+	setlo		%lo(__kernel_frame0_ptr),gr28
+	ldi		@(gr28,#0),gr28
+
+	# handle h/w single-step through exceptions
+	sti		gr0,@(gr28,#REG__STATUS)
+
+	.globl		__entry_uspace_external_interrupt_reentry
+__entry_uspace_external_interrupt_reentry:
+	LEDS		0x6201
+
+	setlos		#REG__END,gr30
+	dcpl		gr28,gr30,#0
+
+	# finish building the exception frame
+	sti		sp,  @(gr28,#REG_SP)
+	stdi		gr2, @(gr28,#REG_GR(2))
+	stdi		gr4, @(gr28,#REG_GR(4))
+	stdi		gr6, @(gr28,#REG_GR(6))
+	stdi		gr8, @(gr28,#REG_GR(8))
+	stdi		gr10,@(gr28,#REG_GR(10))
+	stdi		gr12,@(gr28,#REG_GR(12))
+	stdi		gr14,@(gr28,#REG_GR(14))
+	stdi		gr16,@(gr28,#REG_GR(16))
+	stdi		gr18,@(gr28,#REG_GR(18))
+	stdi		gr20,@(gr28,#REG_GR(20))
+	stdi		gr22,@(gr28,#REG_GR(22))
+	stdi		gr24,@(gr28,#REG_GR(24))
+	stdi		gr26,@(gr28,#REG_GR(26))
+	sti		gr0, @(gr28,#REG_GR(28))
+	sti		gr29,@(gr28,#REG_GR(29))
+	stdi.p		gr30,@(gr28,#REG_GR(30))
+
+	# set up the kernel stack pointer
+	ori		gr28,0,sp
+
+	movsg		tbr ,gr20
+	movsg		psr ,gr22
+	movsg		pcsr,gr21
+	movsg		isr ,gr23
+	movsg		ccr ,gr24
+	movsg		cccr,gr25
+	movsg		lr  ,gr26
+	movsg		lcr ,gr27
+
+	setlos.p	#-1,gr4
+	andi		gr22,#PSR_PS,gr5		/* try to rebuild original PSR value */
+	andi.p		gr22,#~(PSR_PS|PSR_S),gr6
+	slli		gr5,#1,gr5
+	or		gr6,gr5,gr5
+	andi		gr5,#~PSR_ET,gr5
+
+	sti		gr20,@(gr28,#REG_TBR)
+	sti		gr21,@(gr28,#REG_PC)
+	sti		gr5 ,@(gr28,#REG_PSR)
+	sti		gr23,@(gr28,#REG_ISR)
+	stdi		gr24,@(gr28,#REG_CCR)
+	stdi		gr26,@(gr28,#REG_LR)
+	sti		gr4 ,@(gr28,#REG_SYSCALLNO)
+
+	movsg		iacc0h,gr4
+	movsg		iacc0l,gr5
+	stdi		gr4,@(gr28,#REG_IACC0)
+
+	movsg		gner0,gr4
+	movsg		gner1,gr5
+	stdi.p		gr4,@(gr28,#REG_GNER0)
+
+	# interrupts start off fully disabled in the interrupt handler
+	subcc		gr0,gr0,gr0,icc2		/* set Z and clear C */
+
+	# set up kernel global registers
+	sethi.p		%hi(__kernel_current_task),gr5
+	setlo		%lo(__kernel_current_task),gr5
+	sethi.p		%hi(_gp),gr16
+	setlo		%lo(_gp),gr16
+	ldi		@(gr5,#0),gr29
+	ldi.p		@(gr29,#4),gr15		; __current_thread_info = current->thread_info
+
+	# make sure we (the kernel) get div-zero and misalignment exceptions
+	setlos		#ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5
+	movgs		gr5,isr
+
+	# switch to the kernel trap table
+	sethi.p		%hi(__entry_kerneltrap_table),gr6
+	setlo		%lo(__entry_kerneltrap_table),gr6
+	movgs		gr6,tbr
+
+	# set the return address
+	sethi.p		%hi(__entry_return_from_user_interrupt),gr4
+	setlo		%lo(__entry_return_from_user_interrupt),gr4
+	movgs		gr4,lr
+
+	# raise the minimum interrupt priority to 15 (NMI only) and enable exceptions
+	movsg		psr,gr4
+
+	ori		gr4,#PSR_PIL_14,gr4
+	movgs		gr4,psr
+	ori		gr4,#PSR_PIL_14|PSR_ET,gr4
+	movgs		gr4,psr
+
+	LEDS		0x6202
+	bra		do_IRQ
+
+	.size		__entry_uspace_external_interrupt,.-__entry_uspace_external_interrupt
+
+###############################################################################
+#
+# entry point for External interrupts received whilst executing kernel code
+# - on arriving here, the following registers should already be set up:
+#	GR15	- current thread_info struct pointer
+#	GR16	- kernel GP-REL pointer
+#	GR29	- current task struct pointer
+#	TBR	- kernel trap vector table
+#	ISR	- kernel's preferred integer controls
+#
+###############################################################################
+	.globl		__entry_kernel_external_interrupt
+        .type		__entry_kernel_external_interrupt,@function
+__entry_kernel_external_interrupt:
+	LEDS		0x6210
+//	sub		sp,gr15,gr31
+//	LEDS32
+
+	# set up the stack pointer
+	or.p		sp,gr0,gr30
+	subi		sp,#REG__END,sp
+	sti		gr30,@(sp,#REG_SP)
+
+	# handle h/w single-step through exceptions
+	sti		gr0,@(sp,#REG__STATUS)
+
+	.globl		__entry_kernel_external_interrupt_reentry
+__entry_kernel_external_interrupt_reentry:
+	LEDS		0x6211
+
+	# set up the exception frame
+	setlos		#REG__END,gr30
+	dcpl		sp,gr30,#0
+
+	sti.p		gr28,@(sp,#REG_GR(28))
+	ori		sp,0,gr28
+
+	# finish building the exception frame
+	stdi		gr2,@(gr28,#REG_GR(2))
+	stdi		gr4,@(gr28,#REG_GR(4))
+	stdi		gr6,@(gr28,#REG_GR(6))
+	stdi		gr8,@(gr28,#REG_GR(8))
+	stdi		gr10,@(gr28,#REG_GR(10))
+	stdi		gr12,@(gr28,#REG_GR(12))
+	stdi		gr14,@(gr28,#REG_GR(14))
+	stdi		gr16,@(gr28,#REG_GR(16))
+	stdi		gr18,@(gr28,#REG_GR(18))
+	stdi		gr20,@(gr28,#REG_GR(20))
+	stdi		gr22,@(gr28,#REG_GR(22))
+	stdi		gr24,@(gr28,#REG_GR(24))
+	stdi		gr26,@(gr28,#REG_GR(26))
+	sti		gr29,@(gr28,#REG_GR(29))
+	stdi.p		gr30,@(gr28,#REG_GR(30))
+
+	# note virtual interrupts will be fully enabled upon return
+	subicc		gr0,#1,gr0,icc2			/* clear Z, set C */
+
+	movsg		tbr ,gr20
+	movsg		psr ,gr22
+	movsg		pcsr,gr21
+	movsg		isr ,gr23
+	movsg		ccr ,gr24
+	movsg		cccr,gr25
+	movsg		lr  ,gr26
+	movsg		lcr ,gr27
+
+	setlos.p	#-1,gr4
+	andi		gr22,#PSR_PS,gr5		/* try to rebuild original PSR value */
+	andi.p		gr22,#~(PSR_PS|PSR_S),gr6
+	slli		gr5,#1,gr5
+	or		gr6,gr5,gr5
+	andi.p		gr5,#~PSR_ET,gr5
+
+	# set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel
+	# - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt
+	andi		gr25,#~0xc0,gr25
+
+	sti		gr20,@(gr28,#REG_TBR)
+	sti		gr21,@(gr28,#REG_PC)
+	sti		gr5 ,@(gr28,#REG_PSR)
+	sti		gr23,@(gr28,#REG_ISR)
+	stdi		gr24,@(gr28,#REG_CCR)
+	stdi		gr26,@(gr28,#REG_LR)
+	sti		gr4 ,@(gr28,#REG_SYSCALLNO)
+
+	movsg		iacc0h,gr4
+	movsg		iacc0l,gr5
+	stdi		gr4,@(gr28,#REG_IACC0)
+
+	movsg		gner0,gr4
+	movsg		gner1,gr5
+	stdi.p		gr4,@(gr28,#REG_GNER0)
+
+	# interrupts start off fully disabled in the interrupt handler
+	subcc		gr0,gr0,gr0,icc2			/* set Z and clear C */
+
+	# set the return address
+	sethi.p		%hi(__entry_return_from_kernel_interrupt),gr4
+	setlo		%lo(__entry_return_from_kernel_interrupt),gr4
+	movgs		gr4,lr
+
+	# clear power-saving mode flags
+	movsg		hsr0,gr4
+	andi		gr4,#~HSR0_PDM,gr4
+	movgs		gr4,hsr0
+
+	# raise the minimum interrupt priority to 15 (NMI only) and enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_PIL_14,gr4
+	movgs		gr4,psr
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+
+	LEDS		0x6212
+	bra		do_IRQ
+
+	.size		__entry_kernel_external_interrupt,.-__entry_kernel_external_interrupt
+
+###############################################################################
+#
+# deal with interrupts that were actually virtually disabled
+# - we need to really disable them, flag the fact and return immediately
+# - if you change this, you must alter break.S also
+#
+###############################################################################
+	.balign		L1_CACHE_BYTES
+	.globl		__entry_kernel_external_interrupt_virtually_disabled
+	.type		__entry_kernel_external_interrupt_virtually_disabled,@function
+__entry_kernel_external_interrupt_virtually_disabled:
+	movsg		psr,gr30
+	andi		gr30,#~PSR_PIL,gr30
+	ori		gr30,#PSR_PIL_14,gr30		; debugging interrupts only
+	movgs		gr30,psr
+	subcc		gr0,gr0,gr0,icc2		; leave Z set, clear C
+	rett		#0
+
+	.size		__entry_kernel_external_interrupt_virtually_disabled,.-__entry_kernel_external_interrupt_virtually_disabled
+
+###############################################################################
+#
+# deal with re-enablement of interrupts that were pending when virtually re-enabled
+# - set ICC2.C, re-enable the real interrupts and return
+# - we can clear ICC2.Z because we shouldn't be here if it's not 0 [due to TIHI]
+# - if you change this, you must alter break.S also
+#
+###############################################################################
+	.balign		L1_CACHE_BYTES
+	.globl		__entry_kernel_external_interrupt_virtual_reenable
+	.type		__entry_kernel_external_interrupt_virtual_reenable,@function
+__entry_kernel_external_interrupt_virtual_reenable:
+	movsg		psr,gr30
+	andi		gr30,#~PSR_PIL,gr30		; re-enable interrupts
+	movgs		gr30,psr
+	subicc		gr0,#1,gr0,icc2			; clear Z, set C
+	rett		#0
+
+	.size		__entry_kernel_external_interrupt_virtual_reenable,.-__entry_kernel_external_interrupt_virtual_reenable
+
+###############################################################################
+#
+# entry point for Software and Progam interrupts generated whilst executing userspace code
+#
+###############################################################################
+	.globl		__entry_uspace_softprog_interrupt
+        .type		__entry_uspace_softprog_interrupt,@function
+	.globl		__entry_uspace_handle_mmu_fault
+__entry_uspace_softprog_interrupt:
+	LEDS		0x6000
+#ifdef CONFIG_MMU
+	movsg		ear0,gr28
+__entry_uspace_handle_mmu_fault:
+	movgs		gr28,scr2
+#endif
+	sethi.p		%hi(__kernel_frame0_ptr),gr28
+	setlo		%lo(__kernel_frame0_ptr),gr28
+	ldi		@(gr28,#0),gr28
+
+	# handle h/w single-step through exceptions
+	sti		gr0,@(gr28,#REG__STATUS)
+
+	.globl		__entry_uspace_softprog_interrupt_reentry
+__entry_uspace_softprog_interrupt_reentry:
+	LEDS		0x6001
+
+	setlos		#REG__END,gr30
+	dcpl		gr28,gr30,#0
+
+	# set up the kernel stack pointer
+	sti.p		sp,@(gr28,#REG_SP)
+	ori		gr28,0,sp
+	sti		gr0,@(gr28,#REG_GR(28))
+
+	stdi		gr20,@(gr28,#REG_GR(20))
+	stdi		gr22,@(gr28,#REG_GR(22))
+
+	movsg		tbr,gr20
+	movsg		pcsr,gr21
+	movsg		psr,gr22
+
+	sethi.p		%hi(__entry_return_from_user_exception),gr23
+	setlo		%lo(__entry_return_from_user_exception),gr23
+
+	bra		__entry_common
+
+	.size		__entry_uspace_softprog_interrupt,.-__entry_uspace_softprog_interrupt
+
+	# single-stepping was disabled on entry to a TLB handler that then faulted
+#ifdef CONFIG_MMU
+	.globl		__entry_uspace_handle_mmu_fault_sstep
+__entry_uspace_handle_mmu_fault_sstep:
+	movgs		gr28,scr2
+	sethi.p		%hi(__kernel_frame0_ptr),gr28
+	setlo		%lo(__kernel_frame0_ptr),gr28
+	ldi		@(gr28,#0),gr28
+
+	# flag single-step re-enablement
+	sti		gr0,@(gr28,#REG__STATUS)
+	bra		__entry_uspace_softprog_interrupt_reentry
+#endif
+
+
+###############################################################################
+#
+# entry point for Software and Progam interrupts generated whilst executing kernel code
+#
+###############################################################################
+	.globl		__entry_kernel_softprog_interrupt
+        .type		__entry_kernel_softprog_interrupt,@function
+__entry_kernel_softprog_interrupt:
+	LEDS		0x6004
+
+#ifdef CONFIG_MMU
+	movsg		ear0,gr30
+	movgs		gr30,scr2
+#endif
+
+	.globl		__entry_kernel_handle_mmu_fault
+__entry_kernel_handle_mmu_fault:
+	# set up the stack pointer
+	subi		sp,#REG__END,sp
+	sti		sp,@(sp,#REG_SP)
+	sti		sp,@(sp,#REG_SP-4)
+	andi		sp,#~7,sp
+
+	# handle h/w single-step through exceptions
+	sti		gr0,@(sp,#REG__STATUS)
+
+	.globl		__entry_kernel_softprog_interrupt_reentry
+__entry_kernel_softprog_interrupt_reentry:
+	LEDS		0x6005
+
+	setlos		#REG__END,gr30
+	dcpl		sp,gr30,#0
+
+	# set up the exception frame
+	sti.p		gr28,@(sp,#REG_GR(28))
+	ori		sp,0,gr28
+
+	stdi		gr20,@(gr28,#REG_GR(20))
+	stdi		gr22,@(gr28,#REG_GR(22))
+
+	ldi		@(sp,#REG_SP),gr22		/* reconstruct the old SP */
+	addi		gr22,#REG__END,gr22
+	sti		gr22,@(sp,#REG_SP)
+
+	# set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel
+	# - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt
+	movsg		cccr,gr20
+	andi		gr20,#~0xc0,gr20
+	movgs		gr20,cccr
+
+	movsg		tbr,gr20
+	movsg		pcsr,gr21
+	movsg		psr,gr22
+
+	sethi.p		%hi(__entry_return_from_kernel_exception),gr23
+	setlo		%lo(__entry_return_from_kernel_exception),gr23
+	bra		__entry_common
+
+	.size		__entry_kernel_softprog_interrupt,.-__entry_kernel_softprog_interrupt
+
+	# single-stepping was disabled on entry to a TLB handler that then faulted
+#ifdef CONFIG_MMU
+	.globl		__entry_kernel_handle_mmu_fault_sstep
+__entry_kernel_handle_mmu_fault_sstep:
+	# set up the stack pointer
+	subi		sp,#REG__END,sp
+	sti		sp,@(sp,#REG_SP)
+	sti		sp,@(sp,#REG_SP-4)
+	andi		sp,#~7,sp
+
+	# flag single-step re-enablement
+	sethi		#REG__STATUS_STEP,gr30
+	sti		gr30,@(sp,#REG__STATUS)
+	bra		__entry_kernel_softprog_interrupt_reentry
+#endif
+
+
+###############################################################################
+#
+# the rest of the kernel entry point code
+# - on arriving here, the following registers should be set up:
+#	GR1	- kernel stack pointer
+#	GR7	- syscall number (trap 0 only)
+#	GR8-13	- syscall args (trap 0 only)
+#	GR20	- saved TBR
+#	GR21	- saved PC
+#	GR22	- saved PSR
+#	GR23	- return handler address
+#	GR28	- exception frame on stack
+#	SCR2	- saved EAR0 where applicable (clobbered by ICI & ICEF insns on FR451)
+#	PSR	- PSR.S 1, PSR.ET 0
+#
+###############################################################################
+	.globl		__entry_common
+        .type		__entry_common,@function
+__entry_common:
+	LEDS		0x6008
+
+	# finish building the exception frame
+	stdi		gr2,@(gr28,#REG_GR(2))
+	stdi		gr4,@(gr28,#REG_GR(4))
+	stdi		gr6,@(gr28,#REG_GR(6))
+	stdi		gr8,@(gr28,#REG_GR(8))
+	stdi		gr10,@(gr28,#REG_GR(10))
+	stdi		gr12,@(gr28,#REG_GR(12))
+	stdi		gr14,@(gr28,#REG_GR(14))
+	stdi		gr16,@(gr28,#REG_GR(16))
+	stdi		gr18,@(gr28,#REG_GR(18))
+	stdi		gr24,@(gr28,#REG_GR(24))
+	stdi		gr26,@(gr28,#REG_GR(26))
+	sti		gr29,@(gr28,#REG_GR(29))
+	stdi		gr30,@(gr28,#REG_GR(30))
+
+	movsg		lcr ,gr27
+	movsg		lr  ,gr26
+	movgs		gr23,lr
+	movsg		cccr,gr25
+	movsg		ccr ,gr24
+	movsg		isr ,gr23
+
+	setlos.p	#-1,gr4
+	andi		gr22,#PSR_PS,gr5		/* try to rebuild original PSR value */
+	andi.p		gr22,#~(PSR_PS|PSR_S),gr6
+	slli		gr5,#1,gr5
+	or		gr6,gr5,gr5
+	andi		gr5,#~PSR_ET,gr5
+
+	sti		gr20,@(gr28,#REG_TBR)
+	sti		gr21,@(gr28,#REG_PC)
+	sti		gr5 ,@(gr28,#REG_PSR)
+	sti		gr23,@(gr28,#REG_ISR)
+	stdi		gr24,@(gr28,#REG_CCR)
+	stdi		gr26,@(gr28,#REG_LR)
+	sti		gr4 ,@(gr28,#REG_SYSCALLNO)
+
+	movsg		iacc0h,gr4
+	movsg		iacc0l,gr5
+	stdi		gr4,@(gr28,#REG_IACC0)
+
+	movsg		gner0,gr4
+	movsg		gner1,gr5
+	stdi.p		gr4,@(gr28,#REG_GNER0)
+
+	# set up virtual interrupt disablement
+	subicc		gr0,#1,gr0,icc2			/* clear Z flag, set C flag */
+
+	# set up kernel global registers
+	sethi.p		%hi(__kernel_current_task),gr5
+	setlo		%lo(__kernel_current_task),gr5
+	sethi.p		%hi(_gp),gr16
+	setlo		%lo(_gp),gr16
+	ldi		@(gr5,#0),gr29
+	ldi		@(gr29,#4),gr15		; __current_thread_info = current->thread_info
+
+	# switch to the kernel trap table
+	sethi.p		%hi(__entry_kerneltrap_table),gr6
+	setlo		%lo(__entry_kerneltrap_table),gr6
+	movgs		gr6,tbr
+
+	# make sure we (the kernel) get div-zero and misalignment exceptions
+	setlos		#ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5
+	movgs		gr5,isr
+
+	# clear power-saving mode flags
+	movsg		hsr0,gr4
+	andi		gr4,#~HSR0_PDM,gr4
+	movgs		gr4,hsr0
+
+	# multiplex again using old TBR as a guide
+	setlos.p	#TBR_TT,gr3
+	sethi		%hi(__entry_vector_table),gr6
+	and.p		gr20,gr3,gr5
+	setlo		%lo(__entry_vector_table),gr6
+	srli		gr5,#2,gr5
+	ld		@(gr5,gr6),gr5
+
+	LEDS		0x6009
+	jmpl		@(gr5,gr0)
+
+
+	.size		__entry_common,.-__entry_common
+
+###############################################################################
+#
+# handle instruction MMU fault
+#
+###############################################################################
+#ifdef CONFIG_MMU
+	.globl		__entry_insn_mmu_fault
+__entry_insn_mmu_fault:
+	LEDS		0x6010
+	setlos		#0,gr8
+	movsg		esr0,gr9
+	movsg		scr2,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+
+	sethi.p		%hi(do_page_fault),gr5
+	setlo		%lo(do_page_fault),gr5
+	jmpl		@(gr5,gr0)	; call do_page_fault(0,esr0,ear0)
+#endif
+
+
+###############################################################################
+#
+# handle instruction access error
+#
+###############################################################################
+	.globl		__entry_insn_access_error
+__entry_insn_access_error:
+	LEDS		0x6011
+	sethi.p		%hi(insn_access_error),gr5
+	setlo		%lo(insn_access_error),gr5
+	movsg		esfr1,gr8
+	movsg		epcr0,gr9
+	movsg		esr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call insn_access_error(esfr1,epcr0,esr0)
+
+###############################################################################
+#
+# handle various instructions of dubious legality
+#
+###############################################################################
+	.globl		__entry_unsupported_trap
+	.globl		__entry_illegal_instruction
+	.globl		__entry_privileged_instruction
+	.globl		__entry_debug_exception
+__entry_unsupported_trap:
+	subi		gr21,#4,gr21
+	sti		gr21,@(gr28,#REG_PC)
+__entry_illegal_instruction:
+__entry_privileged_instruction:
+__entry_debug_exception:
+	LEDS		0x6012
+	sethi.p		%hi(illegal_instruction),gr5
+	setlo		%lo(illegal_instruction),gr5
+	movsg		esfr1,gr8
+	movsg		epcr0,gr9
+	movsg		esr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call ill_insn(esfr1,epcr0,esr0)
+
+###############################################################################
+#
+# handle atomic operation emulation for userspace
+#
+###############################################################################
+	.globl		__entry_atomic_op
+__entry_atomic_op:
+	LEDS		0x6012
+	sethi.p		%hi(atomic_operation),gr5
+	setlo		%lo(atomic_operation),gr5
+	movsg		esfr1,gr8
+	movsg		epcr0,gr9
+	movsg		esr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call atomic_operation(esfr1,epcr0,esr0)
+
+###############################################################################
+#
+# handle media exception
+#
+###############################################################################
+	.globl		__entry_media_exception
+__entry_media_exception:
+	LEDS		0x6013
+	sethi.p		%hi(media_exception),gr5
+	setlo		%lo(media_exception),gr5
+	movsg		msr0,gr8
+	movsg		msr1,gr9
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call media_excep(msr0,msr1)
+
+###############################################################################
+#
+# handle data MMU fault
+# handle data DAT fault (write-protect exception)
+#
+###############################################################################
+#ifdef CONFIG_MMU
+	.globl		__entry_data_mmu_fault
+__entry_data_mmu_fault:
+	.globl		__entry_data_dat_fault
+__entry_data_dat_fault:
+	LEDS		0x6014
+	setlos		#1,gr8
+	movsg		esr0,gr9
+	movsg		scr2,gr10	; saved EAR0
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+
+	sethi.p		%hi(do_page_fault),gr5
+	setlo		%lo(do_page_fault),gr5
+	jmpl		@(gr5,gr0)	; call do_page_fault(1,esr0,ear0)
+#endif
+
+###############################################################################
+#
+# handle data and instruction access exceptions
+#
+###############################################################################
+	.globl		__entry_insn_access_exception
+	.globl		__entry_data_access_exception
+__entry_insn_access_exception:
+__entry_data_access_exception:
+	LEDS		0x6016
+	sethi.p		%hi(memory_access_exception),gr5
+	setlo		%lo(memory_access_exception),gr5
+	movsg		esr0,gr8
+	movsg		scr2,gr9	; saved EAR0
+	movsg		epcr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call memory_access_error(esr0,ear0,epcr0)
+
+###############################################################################
+#
+# handle data access error
+#
+###############################################################################
+	.globl		__entry_data_access_error
+__entry_data_access_error:
+	LEDS		0x6016
+	sethi.p		%hi(data_access_error),gr5
+	setlo		%lo(data_access_error),gr5
+	movsg		esfr1,gr8
+	movsg		esr15,gr9
+	movsg		ear15,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call data_access_error(esfr1,esr15,ear15)
+
+###############################################################################
+#
+# handle data store error
+#
+###############################################################################
+	.globl		__entry_data_store_error
+__entry_data_store_error:
+	LEDS		0x6017
+	sethi.p		%hi(data_store_error),gr5
+	setlo		%lo(data_store_error),gr5
+	movsg		esfr1,gr8
+	movsg		esr14,gr9
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call data_store_error(esfr1,esr14)
+
+###############################################################################
+#
+# handle division exception
+#
+###############################################################################
+	.globl		__entry_division_exception
+__entry_division_exception:
+	LEDS		0x6018
+	sethi.p		%hi(division_exception),gr5
+	setlo		%lo(division_exception),gr5
+	movsg		esfr1,gr8
+	movsg		esr0,gr9
+	movsg		isr,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call div_excep(esfr1,esr0,isr)
+
+###############################################################################
+#
+# handle compound exception
+#
+###############################################################################
+	.globl		__entry_compound_exception
+__entry_compound_exception:
+	LEDS		0x6019
+	sethi.p		%hi(compound_exception),gr5
+	setlo		%lo(compound_exception),gr5
+	movsg		esfr1,gr8
+	movsg		esr0,gr9
+	movsg		esr14,gr10
+	movsg		esr15,gr11
+	movsg		msr0,gr12
+	movsg		msr1,gr13
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call comp_excep(esfr1,esr0,esr14,esr15,msr0,msr1)
+
+###############################################################################
+#
+# handle interrupts and NMIs
+#
+###############################################################################
+	.globl		__entry_do_IRQ
+__entry_do_IRQ:
+	LEDS		0x6020
+
+	# we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	bra		do_IRQ
+
+	.globl		__entry_do_NMI
+__entry_do_NMI:
+	LEDS		0x6021
+
+	# we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	bra		do_NMI
+
+###############################################################################
+#
+# the return path for a newly forked child process
+# - __switch_to() saved the old current pointer in GR8 for us
+#
+###############################################################################
+	.globl		ret_from_fork
+ret_from_fork:
+	LEDS		0x6100
+	call		schedule_tail
+
+	# fork & co. return 0 to child
+	setlos.p	#0,gr8
+	bra		__syscall_exit
+
+###################################################################################################
+#
+# Return to user mode is not as complex as all this looks,
+# but we want the default path for a system call return to
+# go as quickly as possible which is why some of this is
+# less clear than it otherwise should be.
+#
+###################################################################################################
+	.balign		L1_CACHE_BYTES
+	.globl		system_call
+system_call:
+	LEDS		0x6101
+	movsg		psr,gr4			; enable exceptions
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+
+	sti		gr7,@(gr28,#REG_SYSCALLNO)
+	sti.p		gr8,@(gr28,#REG_ORIG_GR8)
+
+	subicc		gr7,#nr_syscalls,gr0,icc0
+	bnc		icc0,#0,__syscall_badsys
+
+	ldi		@(gr15,#TI_FLAGS),gr4
+	andicc		gr4,#_TIF_SYSCALL_TRACE,gr0,icc0
+	bne		icc0,#0,__syscall_trace_entry
+
+__syscall_call:
+	slli.p		gr7,#2,gr7
+	sethi		%hi(sys_call_table),gr5
+	setlo		%lo(sys_call_table),gr5
+	ld		@(gr5,gr7),gr4
+	calll		@(gr4,gr0)
+
+
+###############################################################################
+#
+# return to interrupted process
+#
+###############################################################################
+__syscall_exit:
+	LEDS		0x6300
+
+	sti		gr8,@(gr28,#REG_GR(8))	; save return value
+
+	# rebuild saved psr - execve will change it for init/main.c
+	ldi		@(gr28,#REG_PSR),gr22
+	srli		gr22,#1,gr5
+	andi.p		gr22,#~PSR_PS,gr22
+	andi		gr5,#PSR_PS,gr5
+	or		gr5,gr22,gr22
+	ori		gr22,#PSR_S,gr22
+
+	# keep current PSR in GR23
+	movsg		psr,gr23
+
+	# make sure we don't miss an interrupt setting need_resched or sigpending between
+	# sampling and the RETT
+	ori		gr23,#PSR_PIL_14,gr23
+	movgs		gr23,psr
+
+	ldi		@(gr15,#TI_FLAGS),gr4
+	sethi.p		%hi(_TIF_ALLWORK_MASK),gr5
+	setlo		%lo(_TIF_ALLWORK_MASK),gr5
+	andcc		gr4,gr5,gr0,icc0
+	bne		icc0,#0,__syscall_exit_work
+
+	# restore all registers and return
+__entry_return_direct:
+	LEDS		0x6301
+
+	andi		gr22,#~PSR_ET,gr22
+	movgs		gr22,psr
+
+	ldi		@(gr28,#REG_ISR),gr23
+	lddi		@(gr28,#REG_CCR),gr24
+	lddi		@(gr28,#REG_LR) ,gr26
+	ldi		@(gr28,#REG_PC) ,gr21
+	ldi		@(gr28,#REG_TBR),gr20
+
+	movgs		gr20,tbr
+	movgs		gr21,pcsr
+	movgs		gr23,isr
+	movgs		gr24,ccr
+	movgs		gr25,cccr
+	movgs		gr26,lr
+	movgs		gr27,lcr
+
+	lddi		@(gr28,#REG_GNER0),gr4
+	movgs		gr4,gner0
+	movgs		gr5,gner1
+
+	lddi		@(gr28,#REG_IACC0),gr4
+	movgs		gr4,iacc0h
+	movgs		gr5,iacc0l
+
+	lddi		@(gr28,#REG_GR(4)) ,gr4
+	lddi		@(gr28,#REG_GR(6)) ,gr6
+	lddi		@(gr28,#REG_GR(8)) ,gr8
+	lddi		@(gr28,#REG_GR(10)),gr10
+	lddi		@(gr28,#REG_GR(12)),gr12
+	lddi		@(gr28,#REG_GR(14)),gr14
+	lddi		@(gr28,#REG_GR(16)),gr16
+	lddi		@(gr28,#REG_GR(18)),gr18
+	lddi		@(gr28,#REG_GR(20)),gr20
+	lddi		@(gr28,#REG_GR(22)),gr22
+	lddi		@(gr28,#REG_GR(24)),gr24
+	lddi		@(gr28,#REG_GR(26)),gr26
+	ldi		@(gr28,#REG_GR(29)),gr29
+	lddi		@(gr28,#REG_GR(30)),gr30
+
+	# check to see if a debugging return is required
+	LEDS		0x67f0
+	movsg		ccr,gr2
+	ldi		@(gr28,#REG__STATUS),gr3
+	andicc		gr3,#REG__STATUS_STEP,gr0,icc0
+	bne		icc0,#0,__entry_return_singlestep
+	movgs		gr2,ccr
+
+	ldi		@(gr28,#REG_SP)    ,sp
+	lddi		@(gr28,#REG_GR(2)) ,gr2
+	ldi		@(gr28,#REG_GR(28)),gr28
+
+	LEDS		0x67fe
+//	movsg		pcsr,gr31
+//	LEDS32
+
+#if 0
+	# store the current frame in the workram on the FR451
+	movgs		gr28,scr2
+	sethi.p		%hi(0xfe800000),gr28
+	setlo		%lo(0xfe800000),gr28
+
+	stdi		gr2,@(gr28,#REG_GR(2))
+	stdi		gr4,@(gr28,#REG_GR(4))
+	stdi		gr6,@(gr28,#REG_GR(6))
+	stdi		gr8,@(gr28,#REG_GR(8))
+	stdi		gr10,@(gr28,#REG_GR(10))
+	stdi		gr12,@(gr28,#REG_GR(12))
+	stdi		gr14,@(gr28,#REG_GR(14))
+	stdi		gr16,@(gr28,#REG_GR(16))
+	stdi		gr18,@(gr28,#REG_GR(18))
+	stdi		gr24,@(gr28,#REG_GR(24))
+	stdi		gr26,@(gr28,#REG_GR(26))
+	sti		gr29,@(gr28,#REG_GR(29))
+	stdi		gr30,@(gr28,#REG_GR(30))
+
+	movsg		tbr ,gr30
+	sti		gr30,@(gr28,#REG_TBR)
+	movsg		pcsr,gr30
+	sti		gr30,@(gr28,#REG_PC)
+	movsg		psr ,gr30
+	sti		gr30,@(gr28,#REG_PSR)
+	movsg		isr ,gr30
+	sti		gr30,@(gr28,#REG_ISR)
+	movsg		ccr ,gr30
+	movsg		cccr,gr31
+	stdi		gr30,@(gr28,#REG_CCR)
+	movsg		lr  ,gr30
+	movsg		lcr ,gr31
+	stdi		gr30,@(gr28,#REG_LR)
+	sti		gr0 ,@(gr28,#REG_SYSCALLNO)
+	movsg		scr2,gr28
+#endif
+
+	rett		#0
+
+	# return via break.S
+__entry_return_singlestep:
+	movgs		gr2,ccr
+	lddi		@(gr28,#REG_GR(2)) ,gr2
+	ldi		@(gr28,#REG_SP)    ,sp
+	ldi		@(gr28,#REG_GR(28)),gr28
+	LEDS		0x67ff
+	break
+	.globl		__entry_return_singlestep_breaks_here
+__entry_return_singlestep_breaks_here:
+	nop
+
+
+###############################################################################
+#
+# return to a process interrupted in kernel space
+# - we need to consider preemption if that is enabled
+#
+###############################################################################
+	.balign		L1_CACHE_BYTES
+__entry_return_from_kernel_exception:
+	LEDS		0x6302
+	movsg		psr,gr23
+	ori		gr23,#PSR_PIL_14,gr23
+	movgs		gr23,psr
+	bra		__entry_return_direct
+
+	.balign		L1_CACHE_BYTES
+__entry_return_from_kernel_interrupt:
+	LEDS		0x6303
+	movsg		psr,gr23
+	ori		gr23,#PSR_PIL_14,gr23
+	movgs		gr23,psr
+
+#ifdef CONFIG_PREEMPT
+	ldi		@(gr15,#TI_PRE_COUNT),gr5
+	subicc		gr5,#0,gr0,icc0
+	beq		icc0,#0,__entry_return_direct
+
+__entry_preempt_need_resched:
+	ldi		@(gr15,#TI_FLAGS),gr4
+	andicc		gr4,#_TIF_NEED_RESCHED,gr0,icc0
+	beq		icc0,#1,__entry_return_direct
+
+	setlos		#PREEMPT_ACTIVE,gr5
+	sti		gr5,@(gr15,#TI_FLAGS)
+
+	andi		gr23,#~PSR_PIL,gr23
+	movgs		gr23,psr
+
+	call		schedule
+	sti		gr0,@(gr15,#TI_PRE_COUNT)
+
+	movsg		psr,gr23
+	ori		gr23,#PSR_PIL_14,gr23
+	movgs		gr23,psr
+	bra		__entry_preempt_need_resched
+#else
+	bra		__entry_return_direct
+#endif
+
+
+###############################################################################
+#
+# perform work that needs to be done immediately before resumption
+#
+###############################################################################
+	.globl		__entry_return_from_user_exception
+	.balign		L1_CACHE_BYTES
+__entry_return_from_user_exception:
+	LEDS		0x6501
+
+__entry_resume_userspace:
+	# make sure we don't miss an interrupt setting need_resched or sigpending between
+	# sampling and the RETT
+	movsg		psr,gr23
+	ori		gr23,#PSR_PIL_14,gr23
+	movgs		gr23,psr
+
+__entry_return_from_user_interrupt:
+	LEDS		0x6402
+	ldi		@(gr15,#TI_FLAGS),gr4
+	sethi.p		%hi(_TIF_WORK_MASK),gr5
+	setlo		%lo(_TIF_WORK_MASK),gr5
+	andcc		gr4,gr5,gr0,icc0
+	beq		icc0,#1,__entry_return_direct
+
+__entry_work_pending:
+	LEDS		0x6404
+	andicc		gr4,#_TIF_NEED_RESCHED,gr0,icc0
+	beq		icc0,#1,__entry_work_notifysig
+
+__entry_work_resched:
+	LEDS		0x6408
+	movsg		psr,gr23
+	andi		gr23,#~PSR_PIL,gr23
+	movgs		gr23,psr
+	call		schedule
+	movsg		psr,gr23
+	ori		gr23,#PSR_PIL_14,gr23
+	movgs		gr23,psr
+
+	LEDS		0x6401
+	ldi		@(gr15,#TI_FLAGS),gr4
+	sethi.p		%hi(_TIF_WORK_MASK),gr5
+	setlo		%lo(_TIF_WORK_MASK),gr5
+	andcc		gr4,gr5,gr0,icc0
+	beq		icc0,#1,__entry_return_direct
+	andicc		gr4,#_TIF_NEED_RESCHED,gr0,icc0
+	bne		icc0,#1,__entry_work_resched
+
+__entry_work_notifysig:
+	LEDS		0x6410
+	ori.p		gr4,#0,gr8
+	call		do_notify_resume
+	bra		__entry_resume_userspace
+
+	# perform syscall entry tracing
+__syscall_trace_entry:
+	LEDS		0x6320
+	call		syscall_trace_entry
+
+	lddi.p		@(gr28,#REG_GR(8)) ,gr8
+	ori		gr8,#0,gr7		; syscall_trace_entry() returned new syscallno
+	lddi		@(gr28,#REG_GR(10)),gr10
+	lddi.p		@(gr28,#REG_GR(12)),gr12
+
+	subicc		gr7,#nr_syscalls,gr0,icc0
+	bnc		icc0,#0,__syscall_badsys
+	bra		__syscall_call
+
+	# perform syscall exit tracing
+__syscall_exit_work:
+	LEDS		0x6340
+	andicc		gr4,#_TIF_SYSCALL_TRACE,gr0,icc0
+	beq		icc0,#1,__entry_work_pending
+
+	movsg		psr,gr23
+	andi		gr23,#~PSR_PIL,gr23	; could let syscall_trace_exit() call schedule()
+	movgs		gr23,psr
+
+	call		syscall_trace_exit
+	bra		__entry_resume_userspace
+
+__syscall_badsys:
+	LEDS		0x6380
+	setlos		#-ENOSYS,gr8
+	sti		gr8,@(gr28,#REG_GR(8))	; save return value
+	bra		__entry_resume_userspace
+
+
+###############################################################################
+#
+# syscall vector table
+#
+###############################################################################
+	.section .rodata
+ALIGN
+	.globl		sys_call_table
+sys_call_table:
+	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink		/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall			/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid		/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_ni_syscall // sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall			/* old stty syscall holder */
+	.long sys_ni_syscall			/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall			/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_ni_syscall // sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount				/* recycled never used phys( */
+	.long sys_ni_syscall			/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall			/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall			/* old ulimit syscall holder */
+	.long sys_ni_syscall			/* old old uname syscall */
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp	/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_ni_syscall // sys_sgetmask
+	.long sys_ni_syscall // sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_ni_syscall // sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_ni_syscall // sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long sys_ni_syscall			/* old_select slot */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink		/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long sys_ni_syscall // old_readdir
+	.long sys_ni_syscall	/* 90 */	/* old_mmap slot */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16		/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall			/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs		/* 100 */
+	.long sys_ni_syscall			/* ioperm for i386 */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_ni_syscall	/* obsolete olduname( syscall */
+	.long sys_ni_syscall	/* iopl for i386 */ /* 110 */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* obsolete idle( syscall */
+	.long sys_ni_syscall	/* vm86old for i386 */
+	.long sys_wait4
+	.long sys_swapoff		/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall	/* old "cacheflush" */
+	.long sys_adjtimex
+	.long sys_mprotect	/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek		/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam   /* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min  /* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_ni_syscall	/* for vm86 */
+	.long sys_ni_syscall	/* Old sys_query_module */
+	.long sys_poll
+	.long sys_ni_syscall	/* Old nfsservctl */
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64		/* 180 */
+	.long sys_pwrite64
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset           /* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall		/* streams1 */
+	.long sys_ni_syscall		/* streams2 */
+	.long sys_vfork            /* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64		/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid		/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid		/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall	/* Reserved for Security */
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+ 	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall	//sys_set_thread_area
+	.long sys_ni_syscall	//sys_get_thread_area
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+ 	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill	/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64
+	.long sys_ni_syscall	/* sys_vserver */
+	.long sys_mbind
+	.long sys_get_mempolicy
+	.long sys_set_mempolicy
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive	/* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_ni_syscall		/* reserved for kexec */
+	.long sys_waitid
+	.long sys_ni_syscall		/* 285 */ /* available */
+	.long sys_add_key
+	.long sys_request_key
+	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get		/* 290 */
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare		/* 310 */
+	.long sys_set_robust_list
+	.long sys_get_robust_list
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
+	.long sys_move_pages
+	.long sys_getcpu
+	.long sys_epoll_pwait
+	.long sys_utimensat		/* 320 */
+	.long sys_signalfd
+	.long sys_timerfd_create
+	.long sys_eventfd
+	.long sys_fallocate
+	.long sys_timerfd_settime	/* 325 */
+	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_event_open
+	.long sys_setns
+
+syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
new file mode 100644
index 00000000..a89803b5
--- /dev/null
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -0,0 +1,114 @@
+#include <linux/module.h>
+#include <linux/linkage.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+
+#include <asm/setup.h>
+#include <asm/pgalloc.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/checksum.h>
+#include <asm/hardirq.h>
+#include <asm/cacheflush.h>
+
+extern long __memcpy_user(void *dst, const void *src, size_t count);
+extern long __memset_user(void *dst, const void *src, size_t count);
+
+/* platform dependent support */
+
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+
+EXPORT_SYMBOL(ip_fast_csum);
+
+#if 0
+EXPORT_SYMBOL(local_irq_count);
+EXPORT_SYMBOL(local_bh_count);
+#endif
+EXPORT_SYMBOL(kernel_thread);
+
+EXPORT_SYMBOL(__res_bus_clock_speed_HZ);
+EXPORT_SYMBOL(__page_offset);
+EXPORT_SYMBOL(__memcpy_user);
+EXPORT_SYMBOL(__memset_user);
+EXPORT_SYMBOL(frv_dcache_writeback);
+EXPORT_SYMBOL(frv_cache_invalidate);
+EXPORT_SYMBOL(frv_icache_invalidate);
+EXPORT_SYMBOL(frv_cache_wback_inv);
+
+#ifndef CONFIG_MMU
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+#endif
+
+EXPORT_SYMBOL(__debug_bug_trap);
+
+/* The following are special because they're not called
+   explicitly (the C compiler generates them).  Fortunately,
+   their interface isn't gonna change any time soon now, so
+   it's OK to leave it out of version control.  */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+
+EXPORT_SYMBOL(__outsl_ns);
+EXPORT_SYMBOL(__insl_ns);
+
+#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+EXPORT_SYMBOL(atomic_test_and_ANDNOT_mask);
+EXPORT_SYMBOL(atomic_test_and_OR_mask);
+EXPORT_SYMBOL(atomic_test_and_XOR_mask);
+EXPORT_SYMBOL(atomic_add_return);
+EXPORT_SYMBOL(atomic_sub_return);
+EXPORT_SYMBOL(__xchg_32);
+EXPORT_SYMBOL(__cmpxchg_32);
+#endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
+
+EXPORT_SYMBOL(__debug_bug_printk);
+EXPORT_SYMBOL(__delay_loops_MHz);
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler...  (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __gcc_bcmp(void);
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __cmpdi2(void);
+extern void __divdi3(void);
+extern void __lshrdi3(void);
+extern void __moddi3(void);
+extern void __muldi3(void);
+extern void __mulll(void);
+extern void __umulll(void);
+extern void __negdi2(void);
+extern void __ucmpdi2(void);
+extern void __udivdi3(void);
+extern void __udivmoddi4(void);
+extern void __umoddi3(void);
+
+        /* gcc lib functions */
+//EXPORT_SYMBOL(__gcc_bcmp);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+//EXPORT_SYMBOL(__cmpdi2);
+//EXPORT_SYMBOL(__divdi3);
+EXPORT_SYMBOL(__lshrdi3);
+//EXPORT_SYMBOL(__moddi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__mulll);
+EXPORT_SYMBOL(__umulll);
+EXPORT_SYMBOL(__negdi2);
+EXPORT_SYMBOL(__ucmpdi2);
+//EXPORT_SYMBOL(__udivdi3);
+//EXPORT_SYMBOL(__udivmoddi4);
+//EXPORT_SYMBOL(__umoddi3);
diff --git a/arch/frv/kernel/futex.c b/arch/frv/kernel/futex.c
new file mode 100644
index 00000000..d155ca9e
--- /dev/null
+++ b/arch/frv/kernel/futex.c
@@ -0,0 +1,242 @@
+/* futex.c: futex operations
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/futex.h>
+#include <asm/errno.h>
+
+/*
+ * the various futex operations; MMU fault checking is ignored under no-MMU
+ * conditions
+ */
+static inline int atomic_futex_op_xchg_set(int oparg, u32 __user *uaddr, int *_oldval)
+{
+	int oldval, ret;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "1:	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "2:	cst.p		%3,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    "	setlos		0,%2			\n"
+	    "3:						\n"
+	    ".subsection 2				\n"
+	    "4:	setlos		%5,%2			\n"
+	    "	bra		3b			\n"
+	    ".previous					\n"
+	    ".section __ex_table,\"a\"			\n"
+	    "	.balign		8			\n"
+	    "	.long		1b,4b			\n"
+	    "	.long		2b,4b			\n"
+	    ".previous"
+	    : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+	    : "3"(oparg), "i"(-EFAULT)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	*_oldval = oldval;
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_add(int oparg, u32 __user *uaddr, int *_oldval)
+{
+	int oldval, ret;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "1:	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	add		%1,%3,%3		\n"
+	    "2:	cst.p		%3,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    "	setlos		0,%2			\n"
+	    "3:						\n"
+	    ".subsection 2				\n"
+	    "4:	setlos		%5,%2			\n"
+	    "	bra		3b			\n"
+	    ".previous					\n"
+	    ".section __ex_table,\"a\"			\n"
+	    "	.balign		8			\n"
+	    "	.long		1b,4b			\n"
+	    "	.long		2b,4b			\n"
+	    ".previous"
+	    : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+	    : "3"(oparg), "i"(-EFAULT)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	*_oldval = oldval;
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_or(int oparg, u32 __user *uaddr, int *_oldval)
+{
+	int oldval, ret;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "1:	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	or		%1,%3,%3		\n"
+	    "2:	cst.p		%3,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    "	setlos		0,%2			\n"
+	    "3:						\n"
+	    ".subsection 2				\n"
+	    "4:	setlos		%5,%2			\n"
+	    "	bra		3b			\n"
+	    ".previous					\n"
+	    ".section __ex_table,\"a\"			\n"
+	    "	.balign		8			\n"
+	    "	.long		1b,4b			\n"
+	    "	.long		2b,4b			\n"
+	    ".previous"
+	    : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+	    : "3"(oparg), "i"(-EFAULT)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	*_oldval = oldval;
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_and(int oparg, u32 __user *uaddr, int *_oldval)
+{
+	int oldval, ret;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "1:	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	and		%1,%3,%3		\n"
+	    "2:	cst.p		%3,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    "	setlos		0,%2			\n"
+	    "3:						\n"
+	    ".subsection 2				\n"
+	    "4:	setlos		%5,%2			\n"
+	    "	bra		3b			\n"
+	    ".previous					\n"
+	    ".section __ex_table,\"a\"			\n"
+	    "	.balign		8			\n"
+	    "	.long		1b,4b			\n"
+	    "	.long		2b,4b			\n"
+	    ".previous"
+	    : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+	    : "3"(oparg), "i"(-EFAULT)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	*_oldval = oldval;
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_xor(int oparg, u32 __user *uaddr, int *_oldval)
+{
+	int oldval, ret;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "1:	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	xor		%1,%3,%3		\n"
+	    "2:	cst.p		%3,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    "	setlos		0,%2			\n"
+	    "3:						\n"
+	    ".subsection 2				\n"
+	    "4:	setlos		%5,%2			\n"
+	    "	bra		3b			\n"
+	    ".previous					\n"
+	    ".section __ex_table,\"a\"			\n"
+	    "	.balign		8			\n"
+	    "	.long		1b,4b			\n"
+	    "	.long		2b,4b			\n"
+	    ".previous"
+	    : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+	    : "3"(oparg), "i"(-EFAULT)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	*_oldval = oldval;
+	return ret;
+}
+
+/*****************************************************************************/
+/*
+ * do the futex operations
+ */
+int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_ADD:
+		ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_OR:
+		ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_ANDN:
+		ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_XOR:
+		ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval);
+		break;
+	default:
+		ret = -ENOSYS;
+		break;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS; break;
+		}
+	}
+
+	return ret;
+
+} /* end futex_atomic_op_inuser() */
diff --git a/arch/frv/kernel/gdb-io.c b/arch/frv/kernel/gdb-io.c
new file mode 100644
index 00000000..0707d350
--- /dev/null
+++ b/arch/frv/kernel/gdb-io.c
@@ -0,0 +1,215 @@
+/* gdb-io.c: FR403 GDB stub I/O
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+
+#include <asm/pgtable.h>
+#include <asm/irc-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/gdb-stub.h>
+#include "gdb-io.h"
+
+#ifdef CONFIG_GDBSTUB_UART0
+#define __UART(X) (*(volatile uint8_t *)(UART0_BASE + (UART_##X)))
+#define __UART_IRR_NMI 0xff0f0000
+#else /* CONFIG_GDBSTUB_UART1 */
+#define __UART(X) (*(volatile uint8_t *)(UART1_BASE + (UART_##X)))
+#define __UART_IRR_NMI 0xfff00000
+#endif
+
+#define LSR_WAIT_FOR(STATE)			\
+do {						\
+	gdbstub_do_rx();			\
+} while (!(__UART(LSR) & UART_LSR_##STATE))
+
+#define FLOWCTL_QUERY(LINE)	({ __UART(MSR) & UART_MSR_##LINE; })
+#define FLOWCTL_CLEAR(LINE)	do { __UART(MCR) &= ~UART_MCR_##LINE; mb(); } while (0)
+#define FLOWCTL_SET(LINE)	do { __UART(MCR) |= UART_MCR_##LINE;  mb(); } while (0)
+
+#define FLOWCTL_WAIT_FOR(LINE)			\
+do {						\
+	gdbstub_do_rx();			\
+} while(!FLOWCTL_QUERY(LINE))
+
+/*****************************************************************************/
+/*
+ * initialise the GDB stub
+ * - called with PSR.ET==0, so can't incur external interrupts
+ */
+void gdbstub_io_init(void)
+{
+	/* set up the serial port */
+	__UART(LCR) = UART_LCR_WLEN8; /* 1N8 */
+	__UART(FCR) =
+		UART_FCR_ENABLE_FIFO |
+		UART_FCR_CLEAR_RCVR |
+		UART_FCR_CLEAR_XMIT |
+		UART_FCR_TRIGGER_1;
+
+	FLOWCTL_CLEAR(DTR);
+	FLOWCTL_SET(RTS);
+
+//	gdbstub_set_baud(115200);
+
+	/* we want to get serial receive interrupts */
+	__UART(IER) = UART_IER_RDI | UART_IER_RLSI;
+	mb();
+
+	__set_IRR(6, __UART_IRR_NMI);	/* map ERRs and UARTx to NMI */
+
+} /* end gdbstub_io_init() */
+
+/*****************************************************************************/
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_set_baud(unsigned baud)
+{
+	unsigned value, high, low;
+	u8 lcr;
+
+	/* work out the divisor to give us the nearest higher baud rate */
+	value = __serial_clock_speed_HZ / 16 / baud;
+
+	/* determine the baud rate range */
+	high = __serial_clock_speed_HZ / 16 / value;
+	low = __serial_clock_speed_HZ / 16 / (value + 1);
+
+	/* pick the nearest bound */
+	if (low + (high - low) / 2 > baud)
+		value++;
+
+	lcr = __UART(LCR);
+	__UART(LCR) |= UART_LCR_DLAB;
+	mb();
+	__UART(DLL) = value & 0xff;
+	__UART(DLM) = (value >> 8) & 0xff;
+	mb();
+	__UART(LCR) = lcr;
+	mb();
+
+} /* end gdbstub_set_baud() */
+
+/*****************************************************************************/
+/*
+ * receive characters into the receive FIFO
+ */
+void gdbstub_do_rx(void)
+{
+	unsigned ix, nix;
+
+	ix = gdbstub_rx_inp;
+
+	while (__UART(LSR) & UART_LSR_DR) {
+		nix = (ix + 2) & 0xfff;
+		if (nix == gdbstub_rx_outp)
+			break;
+
+		gdbstub_rx_buffer[ix++] = __UART(LSR);
+		gdbstub_rx_buffer[ix++] = __UART(RX);
+		ix = nix;
+	}
+
+	gdbstub_rx_inp = ix;
+
+	__clr_RC(15);
+	__clr_IRL();
+
+} /* end gdbstub_do_rx() */
+
+/*****************************************************************************/
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_rx_char(unsigned char *_ch, int nonblock)
+{
+	unsigned ix;
+	u8 ch, st;
+
+	*_ch = 0xff;
+
+	if (gdbstub_rx_unget) {
+		*_ch = gdbstub_rx_unget;
+		gdbstub_rx_unget = 0;
+		return 0;
+	}
+
+ try_again:
+	gdbstub_do_rx();
+
+	/* pull chars out of the buffer */
+	ix = gdbstub_rx_outp;
+	if (ix == gdbstub_rx_inp) {
+		if (nonblock)
+			return -EAGAIN;
+		//watchdog_alert_counter = 0;
+		goto try_again;
+	}
+
+	st = gdbstub_rx_buffer[ix++];
+	ch = gdbstub_rx_buffer[ix++];
+	gdbstub_rx_outp = ix & 0x00000fff;
+
+	if (st & UART_LSR_BI) {
+		gdbstub_proto("### GDB Rx Break Detected ###\n");
+		return -EINTR;
+	}
+	else if (st & (UART_LSR_FE|UART_LSR_OE|UART_LSR_PE)) {
+		gdbstub_io("### GDB Rx Error (st=%02x) ###\n",st);
+		return -EIO;
+	}
+	else {
+		gdbstub_io("### GDB Rx %02x (st=%02x) ###\n",ch,st);
+		*_ch = ch & 0x7f;
+		return 0;
+	}
+
+} /* end gdbstub_rx_char() */
+
+/*****************************************************************************/
+/*
+ * send a character to the debugger
+ */
+void gdbstub_tx_char(unsigned char ch)
+{
+	FLOWCTL_SET(DTR);
+	LSR_WAIT_FOR(THRE);
+//	FLOWCTL_WAIT_FOR(CTS);
+
+	if (ch == 0x0a) {
+		__UART(TX) = 0x0d;
+		mb();
+		LSR_WAIT_FOR(THRE);
+//		FLOWCTL_WAIT_FOR(CTS);
+	}
+	__UART(TX) = ch;
+	mb();
+
+	FLOWCTL_CLEAR(DTR);
+} /* end gdbstub_tx_char() */
+
+/*****************************************************************************/
+/*
+ * send a character to the debugger
+ */
+void gdbstub_tx_flush(void)
+{
+	LSR_WAIT_FOR(TEMT);
+	LSR_WAIT_FOR(THRE);
+	FLOWCTL_CLEAR(DTR);
+} /* end gdbstub_tx_flush() */
diff --git a/arch/frv/kernel/gdb-io.h b/arch/frv/kernel/gdb-io.h
new file mode 100644
index 00000000..138714ba
--- /dev/null
+++ b/arch/frv/kernel/gdb-io.h
@@ -0,0 +1,55 @@
+/* gdb-io.h: FR403 GDB I/O port defs
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _GDB_IO_H
+#define _GDB_IO_H
+
+#include <asm/serial-regs.h>
+
+#undef UART_RX
+#undef UART_TX
+#undef UART_DLL
+#undef UART_DLM
+#undef UART_IER
+#undef UART_IIR
+#undef UART_FCR
+#undef UART_LCR
+#undef UART_MCR
+#undef UART_LSR
+#undef UART_MSR
+#undef UART_SCR
+
+#define UART_RX		0*8	/* In:  Receive buffer (DLAB=0) */
+#define UART_TX		0*8	/* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL	0*8	/* Out: Divisor Latch Low (DLAB=1) */
+#define UART_DLM	1*8	/* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER	1*8	/* Out: Interrupt Enable Register */
+#define UART_IIR	2*8	/* In:  Interrupt ID Register */
+#define UART_FCR	2*8	/* Out: FIFO Control Register */
+#define UART_LCR	3*8	/* Out: Line Control Register */
+#define UART_MCR	4*8	/* Out: Modem Control Register */
+#define UART_LSR	5*8	/* In:  Line Status Register */
+#define UART_MSR	6*8	/* In:  Modem Status Register */
+#define UART_SCR	7*8	/* I/O: Scratch Register */
+
+#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
+#define UART_LCR_SBC	0x40	/* Set break control */
+#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
+#define UART_LCR_EPAR	0x10	/* Even parity select */
+#define UART_LCR_PARITY	0x08	/* Parity Enable */
+#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
+#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
+#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
+#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
+
+
+#endif /* _GDB_IO_H */
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
new file mode 100644
index 00000000..bbe78b0b
--- /dev/null
+++ b/arch/frv/kernel/gdb-stub.c
@@ -0,0 +1,2149 @@
+/* gdb-stub.c: FRV GDB stub
+ *
+ * Copyright (C) 2003,4 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from Linux/MIPS version, Copyright (C) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a BREAK instruction.
+ *
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ *
+ *  ==============
+ *  MORE EXAMPLES:
+ *  ==============
+ *
+ *  For reference -- the following are the steps that one
+ *  company took (RidgeRun Inc) to get remote gdb debugging
+ *  going. In this scenario the host machine was a PC and the
+ *  target platform was a Galileo EVB64120A MIPS evaluation
+ *  board.
+ *
+ *  Step 1:
+ *  First download gdb-5.0.tar.gz from the internet.
+ *  and then build/install the package.
+ *
+ *  Example:
+ *    $ tar zxf gdb-5.0.tar.gz
+ *    $ cd gdb-5.0
+ *    $ ./configure --target=frv-elf-gdb
+ *    $ make
+ *    $ frv-elf-gdb
+ *
+ *  Step 2:
+ *  Configure linux for remote debugging and build it.
+ *
+ *  Example:
+ *    $ cd ~/linux
+ *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
+ *    $ make vmlinux
+ *
+ *  Step 3:
+ *  Download the kernel to the remote target and start
+ *  the kernel running. It will promptly halt and wait
+ *  for the host gdb session to connect. It does this
+ *  since the "Kernel Hacking" option has defined
+ *  CONFIG_REMOTE_DEBUG which in turn enables your calls
+ *  to:
+ *     set_debug_traps();
+ *     breakpoint();
+ *
+ *  Step 4:
+ *  Start the gdb session on the host.
+ *
+ *  Example:
+ *    $ frv-elf-gdb vmlinux
+ *    (gdb) set remotebaud 115200
+ *    (gdb) target remote /dev/ttyS1
+ *    ...at this point you are connected to
+ *       the remote target and can use gdb
+ *       in the normal fasion. Setting
+ *       breakpoints, single stepping,
+ *       printing variables, etc.
+ *
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/nmi.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/pgtable.h>
+#include <asm/gdb-stub.h>
+
+#define LEDS(x) do { /* *(u32*)0xe1200004 = ~(x); mb(); */ } while(0)
+
+#undef GDBSTUB_DEBUG_PROTOCOL
+
+extern void debug_to_serial(const char *p, int n);
+extern void gdbstub_console_write(struct console *co, const char *p, unsigned n);
+
+extern volatile uint32_t __break_error_detect[3]; /* ESFR1, ESR15, EAR15 */
+
+struct __debug_amr {
+	unsigned long L, P;
+} __attribute__((aligned(8)));
+
+struct __debug_mmu {
+	struct {
+		unsigned long	hsr0, pcsr, esr0, ear0, epcr0;
+#ifdef CONFIG_MMU
+		unsigned long	tplr, tppr, tpxr, cxnr;
+#endif
+	} regs;
+
+	struct __debug_amr	iamr[16];
+	struct __debug_amr	damr[16];
+
+#ifdef CONFIG_MMU
+	struct __debug_amr	tlb[64*2];
+#endif
+};
+
+static struct __debug_mmu __debug_mmu;
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+
+#define BREAK_INSN	0x801000c0	/* use "break" as bkpt */
+
+static const char gdbstub_banner[] = "Linux/FR-V GDB Stub (c) RedHat 2003\n";
+
+volatile u8	gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+volatile u32	gdbstub_rx_inp = 0;
+volatile u32	gdbstub_rx_outp = 0;
+volatile u8	gdbstub_rx_overflow = 0;
+u8		gdbstub_rx_unget = 0;
+
+/* set with GDB whilst running to permit step through exceptions */
+extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_exceptions;
+
+static char	input_buffer[BUFMAX];
+static char	output_buffer[BUFMAX];
+
+static const char *regnames[] = {
+	"PSR ", "ISR ", "CCR ", "CCCR",
+	"LR  ", "LCR ", "PC  ", "_stt",
+	"sys ", "GR8*", "GNE0", "GNE1",
+	"IACH", "IACL",
+	"TBR ", "SP  ", "FP  ", "GR3 ",
+	"GR4 ", "GR5 ", "GR6 ", "GR7 ",
+	"GR8 ", "GR9 ", "GR10", "GR11",
+	"GR12", "GR13", "GR14", "GR15",
+	"GR16", "GR17", "GR18", "GR19",
+	"GR20", "GR21", "GR22", "GR23",
+	"GR24", "GR25", "GR26", "GR27",
+	"EFRM", "CURR", "GR30", "BFRM"
+};
+
+struct gdbstub_bkpt {
+	unsigned long	addr;		/* address of breakpoint */
+	unsigned	len;		/* size of breakpoint */
+	uint32_t	originsns[7];	/* original instructions */
+};
+
+static struct gdbstub_bkpt gdbstub_bkpts[256];
+
+/*
+ * local prototypes
+ */
+
+static void gdbstub_recv_packet(char *buffer);
+static int gdbstub_send_packet(char *buffer);
+static int gdbstub_compute_signal(unsigned long tbr);
+static int hex(unsigned char ch);
+static int hexToInt(char **ptr, unsigned long *intValue);
+static unsigned char *mem2hex(const void *mem, char *buf, int count, int may_fault);
+static char *hex2mem(const char *buf, void *_mem, int count);
+
+/*
+ * Convert ch from a hex digit to an int
+ */
+static int hex(unsigned char ch)
+{
+	if (ch >= 'a' && ch <= 'f')
+		return ch-'a'+10;
+	if (ch >= '0' && ch <= '9')
+		return ch-'0';
+	if (ch >= 'A' && ch <= 'F')
+		return ch-'A'+10;
+	return -1;
+}
+
+void gdbstub_printk(const char *fmt, ...)
+{
+	static char buf[1024];
+	va_list args;
+	int len;
+
+	/* Emit the output into the temporary buffer */
+	va_start(args, fmt);
+	len = vsnprintf(buf, sizeof(buf), fmt, args);
+	va_end(args);
+	debug_to_serial(buf, len);
+}
+
+static inline char *gdbstub_strcpy(char *dst, const char *src)
+{
+	int loop = 0;
+	while ((dst[loop] = src[loop]))
+	       loop++;
+	return dst;
+}
+
+static void gdbstub_purge_cache(void)
+{
+	asm volatile("	dcef	@(gr0,gr0),#1	\n"
+		     "	icei	@(gr0,gr0),#1	\n"
+		     "	membar			\n"
+		     "	bar			\n"
+		     );
+}
+
+/*****************************************************************************/
+/*
+ * scan for the sequence $<data>#<checksum>
+ */
+static void gdbstub_recv_packet(char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	unsigned char ch;
+	int count, i, ret, error;
+
+	for (;;) {
+		/* wait around for the start character, ignore all other characters */
+		do {
+			gdbstub_rx_char(&ch, 0);
+		} while (ch != '$');
+
+		checksum = 0;
+		xmitcsum = -1;
+		count = 0;
+		error = 0;
+
+		/* now, read until a # or end of buffer is found */
+		while (count < BUFMAX) {
+			ret = gdbstub_rx_char(&ch, 0);
+			if (ret < 0)
+				error = ret;
+
+			if (ch == '#')
+				break;
+			checksum += ch;
+			buffer[count] = ch;
+			count++;
+		}
+
+		if (error == -EIO) {
+			gdbstub_proto("### GDB Rx Error - Skipping packet ###\n");
+			gdbstub_proto("### GDB Tx NAK\n");
+			gdbstub_tx_char('-');
+			continue;
+		}
+
+		if (count >= BUFMAX || error)
+			continue;
+
+		buffer[count] = 0;
+
+		/* read the checksum */
+		ret = gdbstub_rx_char(&ch, 0);
+		if (ret < 0)
+			error = ret;
+		xmitcsum = hex(ch) << 4;
+
+		ret = gdbstub_rx_char(&ch, 0);
+		if (ret < 0)
+			error = ret;
+		xmitcsum |= hex(ch);
+
+		if (error) {
+			if (error == -EIO)
+				gdbstub_proto("### GDB Rx Error - Skipping packet\n");
+			gdbstub_proto("### GDB Tx NAK\n");
+			gdbstub_tx_char('-');
+			continue;
+		}
+
+		/* check the checksum */
+		if (checksum != xmitcsum) {
+			gdbstub_proto("### GDB Tx NAK\n");
+			gdbstub_tx_char('-');	/* failed checksum */
+			continue;
+		}
+
+		gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum);
+		gdbstub_proto("### GDB Tx ACK\n");
+		gdbstub_tx_char('+'); /* successful transfer */
+
+		/* if a sequence char is present, reply the sequence ID */
+		if (buffer[2] == ':') {
+			gdbstub_tx_char(buffer[0]);
+			gdbstub_tx_char(buffer[1]);
+
+			/* remove sequence chars from buffer */
+			count = 0;
+			while (buffer[count]) count++;
+			for (i=3; i <= count; i++)
+				buffer[i - 3] = buffer[i];
+		}
+
+		break;
+	}
+} /* end gdbstub_recv_packet() */
+
+/*****************************************************************************/
+/*
+ * send the packet in buffer.
+ * - return 0 if successfully ACK'd
+ * - return 1 if abandoned due to new incoming packet
+ */
+static int gdbstub_send_packet(char *buffer)
+{
+	unsigned char checksum;
+	int count;
+	unsigned char ch;
+
+	/* $<packet info>#<checksum> */
+	gdbstub_proto("### GDB Tx '%s' ###\n", buffer);
+
+	do {
+		gdbstub_tx_char('$');
+		checksum = 0;
+		count = 0;
+
+		while ((ch = buffer[count]) != 0) {
+			gdbstub_tx_char(ch);
+			checksum += ch;
+			count += 1;
+		}
+
+		gdbstub_tx_char('#');
+		gdbstub_tx_char(hex_asc_hi(checksum));
+		gdbstub_tx_char(hex_asc_lo(checksum));
+
+	} while (gdbstub_rx_char(&ch,0),
+#ifdef GDBSTUB_DEBUG_PROTOCOL
+		 ch=='-' && (gdbstub_proto("### GDB Rx NAK\n"),0),
+		 ch!='-' && ch!='+' && (gdbstub_proto("### GDB Rx ??? %02x\n",ch),0),
+#endif
+		 ch!='+' && ch!='$');
+
+	if (ch=='+') {
+		gdbstub_proto("### GDB Rx ACK\n");
+		return 0;
+	}
+
+	gdbstub_proto("### GDB Tx Abandoned\n");
+	gdbstub_rx_unget = ch;
+	return 1;
+} /* end gdbstub_send_packet() */
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int hexToInt(char **ptr, unsigned long *_value)
+{
+	int count = 0, ch;
+
+	*_value = 0;
+	while (**ptr) {
+		ch = hex(**ptr);
+		if (ch < 0)
+			break;
+
+		*_value = (*_value << 4) | ((uint8_t) ch & 0xf);
+		count++;
+
+		(*ptr)++;
+	}
+
+	return count;
+}
+
+/*****************************************************************************/
+/*
+ * probe an address to see whether it maps to anything
+ */
+static inline int gdbstub_addr_probe(const void *vaddr)
+{
+#ifdef CONFIG_MMU
+	unsigned long paddr;
+
+	asm("lrad %1,%0,#1,#0,#0" : "=r"(paddr) : "r"(vaddr));
+	if (!(paddr & xAMPRx_V))
+		return 0;
+#endif
+
+	return 1;
+} /* end gdbstub_addr_probe() */
+
+#ifdef CONFIG_MMU
+static unsigned long __saved_dampr, __saved_damlr;
+
+static inline unsigned long gdbstub_virt_to_pte(unsigned long vaddr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	unsigned long val, dampr5;
+
+	pgd = (pgd_t *) __get_DAMLR(3) + pgd_index(vaddr);
+	pud = pud_offset(pgd, vaddr);
+	pmd = pmd_offset(pud, vaddr);
+
+	if (pmd_bad(*pmd) || !pmd_present(*pmd))
+		return 0;
+
+	/* make sure dampr5 maps to the correct pmd */
+	dampr5 = __get_DAMPR(5);
+	val = pmd_val(*pmd);
+	__set_DAMPR(5, val | xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V);
+
+	/* now its safe to access pmd */
+	pte = (pte_t *)__get_DAMLR(5) + __pte_index(vaddr);
+	if (pte_present(*pte))
+		val = pte_val(*pte);
+	else
+		val = 0;
+
+	/* restore original dampr5 */
+	__set_DAMPR(5, dampr5);
+
+	return val;
+}
+#endif
+
+static inline int gdbstub_addr_map(const void *vaddr)
+{
+#ifdef CONFIG_MMU
+	unsigned long pte;
+
+	__saved_dampr = __get_DAMPR(2);
+	__saved_damlr = __get_DAMLR(2);
+#endif
+	if (gdbstub_addr_probe(vaddr))
+		return 1;
+#ifdef CONFIG_MMU
+	pte = gdbstub_virt_to_pte((unsigned long) vaddr);
+	if (pte) {
+		__set_DAMPR(2, pte);
+		__set_DAMLR(2, (unsigned long) vaddr & PAGE_MASK);
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+static inline void gdbstub_addr_unmap(void)
+{
+#ifdef CONFIG_MMU
+	__set_DAMPR(2, __saved_dampr);
+	__set_DAMLR(2, __saved_damlr);
+#endif
+}
+
+/*
+ * access potentially dodgy memory through a potentially dodgy pointer
+ */
+static inline int gdbstub_read_dword(const void *addr, uint32_t *_res)
+{
+	unsigned long brr;
+	uint32_t res;
+
+	if (!gdbstub_addr_map(addr))
+		return 0;
+
+	asm volatile("	movgs	gr0,brr	\n"
+		     "	ld%I2	%M2,%0	\n"
+		     "	movsg	brr,%1	\n"
+		     : "=r"(res), "=r"(brr)
+		     : "m"(*(uint32_t *) addr));
+	*_res = res;
+	gdbstub_addr_unmap();
+	return likely(!brr);
+}
+
+static inline int gdbstub_write_dword(void *addr, uint32_t val)
+{
+	unsigned long brr;
+
+	if (!gdbstub_addr_map(addr))
+		return 0;
+
+	asm volatile("	movgs	gr0,brr	\n"
+		     "	st%I2	%1,%M2	\n"
+		     "	movsg	brr,%0	\n"
+		     : "=r"(brr)
+		     : "r"(val), "m"(*(uint32_t *) addr));
+	gdbstub_addr_unmap();
+	return likely(!brr);
+}
+
+static inline int gdbstub_read_word(const void *addr, uint16_t *_res)
+{
+	unsigned long brr;
+	uint16_t res;
+
+	if (!gdbstub_addr_map(addr))
+		return 0;
+
+	asm volatile("	movgs	gr0,brr	\n"
+		     "	lduh%I2	%M2,%0	\n"
+		     "	movsg	brr,%1	\n"
+		     : "=r"(res), "=r"(brr)
+		     : "m"(*(uint16_t *) addr));
+	*_res = res;
+	gdbstub_addr_unmap();
+	return likely(!brr);
+}
+
+static inline int gdbstub_write_word(void *addr, uint16_t val)
+{
+	unsigned long brr;
+
+	if (!gdbstub_addr_map(addr))
+		return 0;
+
+	asm volatile("	movgs	gr0,brr	\n"
+		     "	sth%I2	%1,%M2	\n"
+		     "	movsg	brr,%0	\n"
+		     : "=r"(brr)
+		     : "r"(val), "m"(*(uint16_t *) addr));
+	gdbstub_addr_unmap();
+	return likely(!brr);
+}
+
+static inline int gdbstub_read_byte(const void *addr, uint8_t *_res)
+{
+	unsigned long brr;
+	uint8_t res;
+
+	if (!gdbstub_addr_map(addr))
+		return 0;
+
+	asm volatile("	movgs	gr0,brr	\n"
+		     "	ldub%I2	%M2,%0	\n"
+		     "	movsg	brr,%1	\n"
+		     : "=r"(res), "=r"(brr)
+		     : "m"(*(uint8_t *) addr));
+	*_res = res;
+	gdbstub_addr_unmap();
+	return likely(!brr);
+}
+
+static inline int gdbstub_write_byte(void *addr, uint8_t val)
+{
+	unsigned long brr;
+
+	if (!gdbstub_addr_map(addr))
+		return 0;
+
+	asm volatile("	movgs	gr0,brr	\n"
+		     "	stb%I2	%1,%M2	\n"
+		     "	movsg	brr,%0	\n"
+		     : "=r"(brr)
+		     : "r"(val), "m"(*(uint8_t *) addr));
+	gdbstub_addr_unmap();
+	return likely(!brr);
+}
+
+static void __gdbstub_console_write(struct console *co, const char *p, unsigned n)
+{
+	char outbuf[26];
+	int qty;
+
+	outbuf[0] = 'O';
+
+	while (n > 0) {
+		qty = 1;
+
+		while (n > 0 && qty < 20) {
+			mem2hex(p, outbuf + qty, 2, 0);
+			qty += 2;
+			if (*p == 0x0a) {
+				outbuf[qty++] = '0';
+				outbuf[qty++] = 'd';
+			}
+			p++;
+			n--;
+		}
+
+		outbuf[qty] = 0;
+		gdbstub_send_packet(outbuf);
+	}
+}
+
+#if 0
+void debug_to_serial(const char *p, int n)
+{
+	gdbstub_console_write(NULL,p,n);
+}
+#endif
+
+#ifdef CONFIG_GDB_CONSOLE
+
+static struct console gdbstub_console = {
+	.name	= "gdb",
+	.write	= gdbstub_console_write,	/* in break.S */
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+};
+
+#endif
+
+/*****************************************************************************/
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * - if successful, return a pointer to the last char put in buf (NUL)
+ * - in case of mem fault, return NULL
+ * may_fault is non-zero if we are reading from arbitrary memory, but is currently
+ * not used.
+ */
+static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
+{
+	const uint8_t *mem = _mem;
+	uint8_t ch[4] __attribute__((aligned(4)));
+
+	if ((uint32_t)mem&1 && count>=1) {
+		if (!gdbstub_read_byte(mem,ch))
+			return NULL;
+		buf = hex_byte_pack(buf, ch[0]);
+		mem++;
+		count--;
+	}
+
+	if ((uint32_t)mem&3 && count>=2) {
+		if (!gdbstub_read_word(mem,(uint16_t *)ch))
+			return NULL;
+		buf = hex_byte_pack(buf, ch[0]);
+		buf = hex_byte_pack(buf, ch[1]);
+		mem += 2;
+		count -= 2;
+	}
+
+	while (count>=4) {
+		if (!gdbstub_read_dword(mem,(uint32_t *)ch))
+			return NULL;
+		buf = hex_byte_pack(buf, ch[0]);
+		buf = hex_byte_pack(buf, ch[1]);
+		buf = hex_byte_pack(buf, ch[2]);
+		buf = hex_byte_pack(buf, ch[3]);
+		mem += 4;
+		count -= 4;
+	}
+
+	if (count>=2) {
+		if (!gdbstub_read_word(mem,(uint16_t *)ch))
+			return NULL;
+		buf = hex_byte_pack(buf, ch[0]);
+		buf = hex_byte_pack(buf, ch[1]);
+		mem += 2;
+		count -= 2;
+	}
+
+	if (count>=1) {
+		if (!gdbstub_read_byte(mem,ch))
+			return NULL;
+		buf = hex_byte_pack(buf, ch[0]);
+	}
+
+	*buf = 0;
+
+	return buf;
+} /* end mem2hex() */
+
+/*****************************************************************************/
+/*
+ * convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte of buffer consumed
+ */
+static char *hex2mem(const char *buf, void *_mem, int count)
+{
+	uint8_t *mem = _mem;
+	union {
+		uint32_t l;
+		uint16_t w;
+		uint8_t  b[4];
+	} ch;
+
+	if ((u32)mem&1 && count>=1) {
+		ch.b[0]  = hex(*buf++) << 4;
+		ch.b[0] |= hex(*buf++);
+		if (!gdbstub_write_byte(mem,ch.b[0]))
+			return NULL;
+		mem++;
+		count--;
+	}
+
+	if ((u32)mem&3 && count>=2) {
+		ch.b[0]  = hex(*buf++) << 4;
+		ch.b[0] |= hex(*buf++);
+		ch.b[1]  = hex(*buf++) << 4;
+		ch.b[1] |= hex(*buf++);
+		if (!gdbstub_write_word(mem,ch.w))
+			return NULL;
+		mem += 2;
+		count -= 2;
+	}
+
+	while (count>=4) {
+		ch.b[0]  = hex(*buf++) << 4;
+		ch.b[0] |= hex(*buf++);
+		ch.b[1]  = hex(*buf++) << 4;
+		ch.b[1] |= hex(*buf++);
+		ch.b[2]  = hex(*buf++) << 4;
+		ch.b[2] |= hex(*buf++);
+		ch.b[3]  = hex(*buf++) << 4;
+		ch.b[3] |= hex(*buf++);
+		if (!gdbstub_write_dword(mem,ch.l))
+			return NULL;
+		mem += 4;
+		count -= 4;
+	}
+
+	if (count>=2) {
+		ch.b[0]  = hex(*buf++) << 4;
+		ch.b[0] |= hex(*buf++);
+		ch.b[1]  = hex(*buf++) << 4;
+		ch.b[1] |= hex(*buf++);
+		if (!gdbstub_write_word(mem,ch.w))
+			return NULL;
+		mem += 2;
+		count -= 2;
+	}
+
+	if (count>=1) {
+		ch.b[0]  = hex(*buf++) << 4;
+		ch.b[0] |= hex(*buf++);
+		if (!gdbstub_write_byte(mem,ch.b[0]))
+			return NULL;
+	}
+
+	return (char *) buf;
+} /* end hex2mem() */
+
+/*****************************************************************************/
+/*
+ * This table contains the mapping between FRV TBR.TT exception codes,
+ * and signals, which are primarily what GDB understands.  It also
+ * indicates which hardware traps we need to commandeer when
+ * initializing the stub.
+ */
+static const struct brr_to_sig_map {
+	unsigned long	brr_mask;	/* BRR bitmask */
+	unsigned long	tbr_tt;		/* TBR.TT code (in BRR.EBTT) */
+	unsigned int	signo;		/* Signal that we map this into */
+} brr_to_sig_map[] = {
+	{ BRR_EB,	TBR_TT_INSTR_ACC_ERROR,	SIGSEGV		},
+	{ BRR_EB,	TBR_TT_ILLEGAL_INSTR,	SIGILL		},
+	{ BRR_EB,	TBR_TT_PRIV_INSTR,	SIGILL		},
+	{ BRR_EB,	TBR_TT_MP_EXCEPTION,	SIGFPE		},
+	{ BRR_EB,	TBR_TT_DATA_ACC_ERROR,	SIGSEGV		},
+	{ BRR_EB,	TBR_TT_DATA_STR_ERROR,	SIGSEGV		},
+	{ BRR_EB,	TBR_TT_DIVISION_EXCEP,	SIGFPE		},
+	{ BRR_EB,	TBR_TT_COMPOUND_EXCEP,	SIGSEGV		},
+	{ BRR_EB,	TBR_TT_INTERRUPT_13,	SIGALRM		},	/* watchdog */
+	{ BRR_EB,	TBR_TT_INTERRUPT_14,	SIGINT		},	/* GDB serial */
+	{ BRR_EB,	TBR_TT_INTERRUPT_15,	SIGQUIT		},	/* NMI */
+	{ BRR_CB,	0,			SIGUSR1		},
+	{ BRR_TB,	0,			SIGUSR2		},
+	{ BRR_DBNEx,	0,			SIGTRAP		},
+	{ BRR_DBx,	0,			SIGTRAP		},	/* h/w watchpoint */
+	{ BRR_IBx,	0,			SIGTRAP		},	/* h/w breakpoint */
+	{ BRR_CBB,	0,			SIGTRAP		},
+	{ BRR_SB,	0,			SIGTRAP		},
+	{ BRR_ST,	0,			SIGTRAP		},	/* single step */
+	{ 0,		0,			SIGHUP		}	/* default */
+};
+
+/*****************************************************************************/
+/*
+ * convert the FRV BRR register contents into a UNIX signal number
+ */
+static inline int gdbstub_compute_signal(unsigned long brr)
+{
+	const struct brr_to_sig_map *map;
+	unsigned long tbr = (brr & BRR_EBTT) >> 12;
+
+	for (map = brr_to_sig_map; map->brr_mask; map++)
+		if (map->brr_mask & brr)
+			if (!map->tbr_tt || map->tbr_tt == tbr)
+				break;
+
+	return map->signo;
+} /* end gdbstub_compute_signal() */
+
+/*****************************************************************************/
+/*
+ * set a software breakpoint or a hardware breakpoint or watchpoint
+ */
+static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsigned long len)
+{
+	unsigned long tmp;
+	int bkpt, loop, xloop;
+
+	union {
+		struct {
+			unsigned long mask0, mask1;
+		};
+		uint8_t bytes[8];
+	} dbmr;
+
+	//gdbstub_printk("setbkpt(%ld,%08lx,%ld)\n", type, addr, len);
+
+	switch (type) {
+		/* set software breakpoint */
+	case 0:
+		if (addr & 3 || len > 7*4)
+			return -EINVAL;
+
+		for (bkpt = 255; bkpt >= 0; bkpt--)
+			if (!gdbstub_bkpts[bkpt].addr)
+				break;
+		if (bkpt < 0)
+			return -ENOSPC;
+
+		for (loop = 0; loop < len/4; loop++)
+			if (!gdbstub_read_dword(&((uint32_t *) addr)[loop],
+						&gdbstub_bkpts[bkpt].originsns[loop]))
+				return -EFAULT;
+
+		for (loop = 0; loop < len/4; loop++)
+			if (!gdbstub_write_dword(&((uint32_t *) addr)[loop],
+						 BREAK_INSN)
+			    ) {
+				/* need to undo the changes if possible */
+				for (xloop = 0; xloop < loop; xloop++)
+					gdbstub_write_dword(&((uint32_t *) addr)[xloop],
+							    gdbstub_bkpts[bkpt].originsns[xloop]);
+				return -EFAULT;
+			}
+
+		gdbstub_bkpts[bkpt].addr = addr;
+		gdbstub_bkpts[bkpt].len = len;
+
+#if 0
+		gdbstub_printk("Set BKPT[%02x]: %08lx #%d {%04x, %04x} -> { %04x, %04x }\n",
+			       bkpt,
+			       gdbstub_bkpts[bkpt].addr,
+			       gdbstub_bkpts[bkpt].len,
+			       gdbstub_bkpts[bkpt].originsns[0],
+			       gdbstub_bkpts[bkpt].originsns[1],
+			       ((uint32_t *) addr)[0],
+			       ((uint32_t *) addr)[1]
+			       );
+#endif
+		return 0;
+
+		/* set hardware breakpoint */
+	case 1:
+		if (addr & 3 || len != 4)
+			return -EINVAL;
+
+		if (!(__debug_regs->dcr & DCR_IBE0)) {
+			//gdbstub_printk("set h/w break 0: %08lx\n", addr);
+			__debug_regs->dcr |= DCR_IBE0;
+			__debug_regs->ibar[0] = addr;
+			asm volatile("movgs %0,ibar0" : : "r"(addr));
+			return 0;
+		}
+
+		if (!(__debug_regs->dcr & DCR_IBE1)) {
+			//gdbstub_printk("set h/w break 1: %08lx\n", addr);
+			__debug_regs->dcr |= DCR_IBE1;
+			__debug_regs->ibar[1] = addr;
+			asm volatile("movgs %0,ibar1" : : "r"(addr));
+			return 0;
+		}
+
+		if (!(__debug_regs->dcr & DCR_IBE2)) {
+			//gdbstub_printk("set h/w break 2: %08lx\n", addr);
+			__debug_regs->dcr |= DCR_IBE2;
+			__debug_regs->ibar[2] = addr;
+			asm volatile("movgs %0,ibar2" : : "r"(addr));
+			return 0;
+		}
+
+		if (!(__debug_regs->dcr & DCR_IBE3)) {
+			//gdbstub_printk("set h/w break 3: %08lx\n", addr);
+			__debug_regs->dcr |= DCR_IBE3;
+			__debug_regs->ibar[3] = addr;
+			asm volatile("movgs %0,ibar3" : : "r"(addr));
+			return 0;
+		}
+
+		return -ENOSPC;
+
+		/* set data read/write/access watchpoint */
+	case 2:
+	case 3:
+	case 4:
+		if ((addr & ~7) != ((addr + len - 1) & ~7))
+			return -EINVAL;
+
+		tmp = addr & 7;
+
+		memset(dbmr.bytes, 0xff, sizeof(dbmr.bytes));
+		for (loop = 0; loop < len; loop++)
+			dbmr.bytes[tmp + loop] = 0;
+
+		addr &= ~7;
+
+		if (!(__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0))) {
+			//gdbstub_printk("set h/w watchpoint 0 type %ld: %08lx\n", type, addr);
+			tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0;
+
+			__debug_regs->dcr |= tmp;
+			__debug_regs->dbar[0] = addr;
+			__debug_regs->dbmr[0][0] = dbmr.mask0;
+			__debug_regs->dbmr[0][1] = dbmr.mask1;
+			__debug_regs->dbdr[0][0] = 0;
+			__debug_regs->dbdr[0][1] = 0;
+
+			asm volatile("	movgs	%0,dbar0	\n"
+				     "	movgs	%1,dbmr00	\n"
+				     "	movgs	%2,dbmr01	\n"
+				     "	movgs	gr0,dbdr00	\n"
+				     "	movgs	gr0,dbdr01	\n"
+				     : : "r"(addr), "r"(dbmr.mask0), "r"(dbmr.mask1));
+			return 0;
+		}
+
+		if (!(__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1))) {
+			//gdbstub_printk("set h/w watchpoint 1 type %ld: %08lx\n", type, addr);
+			tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1;
+
+			__debug_regs->dcr |= tmp;
+			__debug_regs->dbar[1] = addr;
+			__debug_regs->dbmr[1][0] = dbmr.mask0;
+			__debug_regs->dbmr[1][1] = dbmr.mask1;
+			__debug_regs->dbdr[1][0] = 0;
+			__debug_regs->dbdr[1][1] = 0;
+
+			asm volatile("	movgs	%0,dbar1	\n"
+				     "	movgs	%1,dbmr10	\n"
+				     "	movgs	%2,dbmr11	\n"
+				     "	movgs	gr0,dbdr10	\n"
+				     "	movgs	gr0,dbdr11	\n"
+				     : : "r"(addr), "r"(dbmr.mask0), "r"(dbmr.mask1));
+			return 0;
+		}
+
+		return -ENOSPC;
+
+	default:
+		return -EINVAL;
+	}
+
+} /* end gdbstub_set_breakpoint() */
+
+/*****************************************************************************/
+/*
+ * clear a breakpoint or watchpoint
+ */
+int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned long len)
+{
+	unsigned long tmp;
+	int bkpt, loop;
+
+	union {
+		struct {
+			unsigned long mask0, mask1;
+		};
+		uint8_t bytes[8];
+	} dbmr;
+
+	//gdbstub_printk("clearbkpt(%ld,%08lx,%ld)\n", type, addr, len);
+
+	switch (type) {
+		/* clear software breakpoint */
+	case 0:
+		for (bkpt = 255; bkpt >= 0; bkpt--)
+			if (gdbstub_bkpts[bkpt].addr == addr && gdbstub_bkpts[bkpt].len == len)
+				break;
+		if (bkpt < 0)
+			return -ENOENT;
+
+		gdbstub_bkpts[bkpt].addr = 0;
+
+		for (loop = 0; loop < len/4; loop++)
+			if (!gdbstub_write_dword(&((uint32_t *) addr)[loop],
+						 gdbstub_bkpts[bkpt].originsns[loop]))
+				return -EFAULT;
+		return 0;
+
+		/* clear hardware breakpoint */
+	case 1:
+		if (addr & 3 || len != 4)
+			return -EINVAL;
+
+#define __get_ibar(X) ({ unsigned long x; asm volatile("movsg ibar"#X",%0" : "=r"(x)); x; })
+
+		if (__debug_regs->dcr & DCR_IBE0 && __get_ibar(0) == addr) {
+			//gdbstub_printk("clear h/w break 0: %08lx\n", addr);
+			__debug_regs->dcr &= ~DCR_IBE0;
+			__debug_regs->ibar[0] = 0;
+			asm volatile("movgs gr0,ibar0");
+			return 0;
+		}
+
+		if (__debug_regs->dcr & DCR_IBE1 && __get_ibar(1) == addr) {
+			//gdbstub_printk("clear h/w break 1: %08lx\n", addr);
+			__debug_regs->dcr &= ~DCR_IBE1;
+			__debug_regs->ibar[1] = 0;
+			asm volatile("movgs gr0,ibar1");
+			return 0;
+		}
+
+		if (__debug_regs->dcr & DCR_IBE2 && __get_ibar(2) == addr) {
+			//gdbstub_printk("clear h/w break 2: %08lx\n", addr);
+			__debug_regs->dcr &= ~DCR_IBE2;
+			__debug_regs->ibar[2] = 0;
+			asm volatile("movgs gr0,ibar2");
+			return 0;
+		}
+
+		if (__debug_regs->dcr & DCR_IBE3 && __get_ibar(3) == addr) {
+			//gdbstub_printk("clear h/w break 3: %08lx\n", addr);
+			__debug_regs->dcr &= ~DCR_IBE3;
+			__debug_regs->ibar[3] = 0;
+			asm volatile("movgs gr0,ibar3");
+			return 0;
+		}
+
+		return -EINVAL;
+
+		/* clear data read/write/access watchpoint */
+	case 2:
+	case 3:
+	case 4:
+		if ((addr & ~7) != ((addr + len - 1) & ~7))
+			return -EINVAL;
+
+		tmp = addr & 7;
+
+		memset(dbmr.bytes, 0xff, sizeof(dbmr.bytes));
+		for (loop = 0; loop < len; loop++)
+			dbmr.bytes[tmp + loop] = 0;
+
+		addr &= ~7;
+
+#define __get_dbar(X) ({ unsigned long x; asm volatile("movsg dbar"#X",%0" : "=r"(x)); x; })
+#define __get_dbmr0(X) ({ unsigned long x; asm volatile("movsg dbmr"#X"0,%0" : "=r"(x)); x; })
+#define __get_dbmr1(X) ({ unsigned long x; asm volatile("movsg dbmr"#X"1,%0" : "=r"(x)); x; })
+
+		/* consider DBAR 0 */
+		tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0;
+
+		if ((__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0)) != tmp ||
+		    __get_dbar(0) != addr ||
+		    __get_dbmr0(0) != dbmr.mask0 ||
+		    __get_dbmr1(0) != dbmr.mask1)
+			goto skip_dbar0;
+
+		//gdbstub_printk("clear h/w watchpoint 0 type %ld: %08lx\n", type, addr);
+		__debug_regs->dcr &= ~(DCR_DRBE0|DCR_DWBE0);
+		__debug_regs->dbar[0] = 0;
+		__debug_regs->dbmr[0][0] = 0;
+		__debug_regs->dbmr[0][1] = 0;
+		__debug_regs->dbdr[0][0] = 0;
+		__debug_regs->dbdr[0][1] = 0;
+
+		asm volatile("	movgs	gr0,dbar0	\n"
+			     "	movgs	gr0,dbmr00	\n"
+			     "	movgs	gr0,dbmr01	\n"
+			     "	movgs	gr0,dbdr00	\n"
+			     "	movgs	gr0,dbdr01	\n");
+		return 0;
+
+	skip_dbar0:
+		/* consider DBAR 0 */
+		tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1;
+
+		if ((__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1)) != tmp ||
+		    __get_dbar(1) != addr ||
+		    __get_dbmr0(1) != dbmr.mask0 ||
+		    __get_dbmr1(1) != dbmr.mask1)
+			goto skip_dbar1;
+
+		//gdbstub_printk("clear h/w watchpoint 1 type %ld: %08lx\n", type, addr);
+		__debug_regs->dcr &= ~(DCR_DRBE1|DCR_DWBE1);
+		__debug_regs->dbar[1] = 0;
+		__debug_regs->dbmr[1][0] = 0;
+		__debug_regs->dbmr[1][1] = 0;
+		__debug_regs->dbdr[1][0] = 0;
+		__debug_regs->dbdr[1][1] = 0;
+
+		asm volatile("	movgs	gr0,dbar1	\n"
+			     "	movgs	gr0,dbmr10	\n"
+			     "	movgs	gr0,dbmr11	\n"
+			     "	movgs	gr0,dbdr10	\n"
+			     "	movgs	gr0,dbdr11	\n");
+		return 0;
+
+	skip_dbar1:
+		return -ENOSPC;
+
+	default:
+		return -EINVAL;
+	}
+} /* end gdbstub_clear_breakpoint() */
+
+/*****************************************************************************/
+/*
+ * check a for an internal software breakpoint, and wind the PC back if necessary
+ */
+static void gdbstub_check_breakpoint(void)
+{
+	unsigned long addr = __debug_frame->pc - 4;
+	int bkpt;
+
+	for (bkpt = 255; bkpt >= 0; bkpt--)
+		if (gdbstub_bkpts[bkpt].addr == addr)
+			break;
+	if (bkpt >= 0)
+		__debug_frame->pc = addr;
+
+	//gdbstub_printk("alter pc [%d] %08lx\n", bkpt, __debug_frame->pc);
+
+} /* end gdbstub_check_breakpoint() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+static void __maybe_unused gdbstub_show_regs(void)
+{
+	unsigned long *reg;
+	int loop;
+
+	gdbstub_printk("\n");
+
+	gdbstub_printk("Frame: @%p [%s]\n",
+		       __debug_frame,
+		       __debug_frame->psr & PSR_S ? "kernel" : "user");
+
+	reg = (unsigned long *) __debug_frame;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
+
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
+			printk("\n");
+		else
+			printk(" | ");
+	}
+
+	gdbstub_printk("Process %s (pid: %d)\n", current->comm, current->pid);
+} /* end gdbstub_show_regs() */
+
+/*****************************************************************************/
+/*
+ * dump debugging regs
+ */
+static void __maybe_unused gdbstub_dump_debugregs(void)
+{
+	gdbstub_printk("DCR    %08lx  ", __debug_status.dcr);
+	gdbstub_printk("BRR    %08lx\n", __debug_status.brr);
+
+	gdbstub_printk("IBAR0  %08lx  ", __get_ibar(0));
+	gdbstub_printk("IBAR1  %08lx  ", __get_ibar(1));
+	gdbstub_printk("IBAR2  %08lx  ", __get_ibar(2));
+	gdbstub_printk("IBAR3  %08lx\n", __get_ibar(3));
+
+	gdbstub_printk("DBAR0  %08lx  ", __get_dbar(0));
+	gdbstub_printk("DBMR00 %08lx  ", __get_dbmr0(0));
+	gdbstub_printk("DBMR01 %08lx\n", __get_dbmr1(0));
+
+	gdbstub_printk("DBAR1  %08lx  ", __get_dbar(1));
+	gdbstub_printk("DBMR10 %08lx  ", __get_dbmr0(1));
+	gdbstub_printk("DBMR11 %08lx\n", __get_dbmr1(1));
+
+	gdbstub_printk("\n");
+} /* end gdbstub_dump_debugregs() */
+
+/*****************************************************************************/
+/*
+ * dump the MMU state into a structure so that it can be accessed with GDB
+ */
+void gdbstub_get_mmu_state(void)
+{
+	asm volatile("movsg hsr0,%0" : "=r"(__debug_mmu.regs.hsr0));
+	asm volatile("movsg pcsr,%0" : "=r"(__debug_mmu.regs.pcsr));
+	asm volatile("movsg esr0,%0" : "=r"(__debug_mmu.regs.esr0));
+	asm volatile("movsg ear0,%0" : "=r"(__debug_mmu.regs.ear0));
+	asm volatile("movsg epcr0,%0" : "=r"(__debug_mmu.regs.epcr0));
+
+	/* read the protection / SAT registers */
+	__debug_mmu.iamr[0].L  = __get_IAMLR(0);
+	__debug_mmu.iamr[0].P  = __get_IAMPR(0);
+	__debug_mmu.iamr[1].L  = __get_IAMLR(1);
+	__debug_mmu.iamr[1].P  = __get_IAMPR(1);
+	__debug_mmu.iamr[2].L  = __get_IAMLR(2);
+	__debug_mmu.iamr[2].P  = __get_IAMPR(2);
+	__debug_mmu.iamr[3].L  = __get_IAMLR(3);
+	__debug_mmu.iamr[3].P  = __get_IAMPR(3);
+	__debug_mmu.iamr[4].L  = __get_IAMLR(4);
+	__debug_mmu.iamr[4].P  = __get_IAMPR(4);
+	__debug_mmu.iamr[5].L  = __get_IAMLR(5);
+	__debug_mmu.iamr[5].P  = __get_IAMPR(5);
+	__debug_mmu.iamr[6].L  = __get_IAMLR(6);
+	__debug_mmu.iamr[6].P  = __get_IAMPR(6);
+	__debug_mmu.iamr[7].L  = __get_IAMLR(7);
+	__debug_mmu.iamr[7].P  = __get_IAMPR(7);
+	__debug_mmu.iamr[8].L  = __get_IAMLR(8);
+	__debug_mmu.iamr[8].P  = __get_IAMPR(8);
+	__debug_mmu.iamr[9].L  = __get_IAMLR(9);
+	__debug_mmu.iamr[9].P  = __get_IAMPR(9);
+	__debug_mmu.iamr[10].L = __get_IAMLR(10);
+	__debug_mmu.iamr[10].P = __get_IAMPR(10);
+	__debug_mmu.iamr[11].L = __get_IAMLR(11);
+	__debug_mmu.iamr[11].P = __get_IAMPR(11);
+	__debug_mmu.iamr[12].L = __get_IAMLR(12);
+	__debug_mmu.iamr[12].P = __get_IAMPR(12);
+	__debug_mmu.iamr[13].L = __get_IAMLR(13);
+	__debug_mmu.iamr[13].P = __get_IAMPR(13);
+	__debug_mmu.iamr[14].L = __get_IAMLR(14);
+	__debug_mmu.iamr[14].P = __get_IAMPR(14);
+	__debug_mmu.iamr[15].L = __get_IAMLR(15);
+	__debug_mmu.iamr[15].P = __get_IAMPR(15);
+
+	__debug_mmu.damr[0].L  = __get_DAMLR(0);
+	__debug_mmu.damr[0].P  = __get_DAMPR(0);
+	__debug_mmu.damr[1].L  = __get_DAMLR(1);
+	__debug_mmu.damr[1].P  = __get_DAMPR(1);
+	__debug_mmu.damr[2].L  = __get_DAMLR(2);
+	__debug_mmu.damr[2].P  = __get_DAMPR(2);
+	__debug_mmu.damr[3].L  = __get_DAMLR(3);
+	__debug_mmu.damr[3].P  = __get_DAMPR(3);
+	__debug_mmu.damr[4].L  = __get_DAMLR(4);
+	__debug_mmu.damr[4].P  = __get_DAMPR(4);
+	__debug_mmu.damr[5].L  = __get_DAMLR(5);
+	__debug_mmu.damr[5].P  = __get_DAMPR(5);
+	__debug_mmu.damr[6].L  = __get_DAMLR(6);
+	__debug_mmu.damr[6].P  = __get_DAMPR(6);
+	__debug_mmu.damr[7].L  = __get_DAMLR(7);
+	__debug_mmu.damr[7].P  = __get_DAMPR(7);
+	__debug_mmu.damr[8].L  = __get_DAMLR(8);
+	__debug_mmu.damr[8].P  = __get_DAMPR(8);
+	__debug_mmu.damr[9].L  = __get_DAMLR(9);
+	__debug_mmu.damr[9].P  = __get_DAMPR(9);
+	__debug_mmu.damr[10].L = __get_DAMLR(10);
+	__debug_mmu.damr[10].P = __get_DAMPR(10);
+	__debug_mmu.damr[11].L = __get_DAMLR(11);
+	__debug_mmu.damr[11].P = __get_DAMPR(11);
+	__debug_mmu.damr[12].L = __get_DAMLR(12);
+	__debug_mmu.damr[12].P = __get_DAMPR(12);
+	__debug_mmu.damr[13].L = __get_DAMLR(13);
+	__debug_mmu.damr[13].P = __get_DAMPR(13);
+	__debug_mmu.damr[14].L = __get_DAMLR(14);
+	__debug_mmu.damr[14].P = __get_DAMPR(14);
+	__debug_mmu.damr[15].L = __get_DAMLR(15);
+	__debug_mmu.damr[15].P = __get_DAMPR(15);
+
+#ifdef CONFIG_MMU
+	do {
+		/* read the DAT entries from the TLB */
+		struct __debug_amr *p;
+		int loop;
+
+		asm volatile("movsg tplr,%0" : "=r"(__debug_mmu.regs.tplr));
+		asm volatile("movsg tppr,%0" : "=r"(__debug_mmu.regs.tppr));
+		asm volatile("movsg tpxr,%0" : "=r"(__debug_mmu.regs.tpxr));
+		asm volatile("movsg cxnr,%0" : "=r"(__debug_mmu.regs.cxnr));
+
+		p = __debug_mmu.tlb;
+
+		/* way 0 */
+		asm volatile("movgs %0,tpxr" :: "r"(0 << TPXR_WAY_SHIFT));
+		for (loop = 0; loop < 64; loop++) {
+			asm volatile("tlbpr %0,gr0,#1,#0" :: "r"(loop << PAGE_SHIFT));
+			asm volatile("movsg tplr,%0" : "=r"(p->L));
+			asm volatile("movsg tppr,%0" : "=r"(p->P));
+			p++;
+		}
+
+		/* way 1 */
+		asm volatile("movgs %0,tpxr" :: "r"(1 << TPXR_WAY_SHIFT));
+		for (loop = 0; loop < 64; loop++) {
+			asm volatile("tlbpr %0,gr0,#1,#0" :: "r"(loop << PAGE_SHIFT));
+			asm volatile("movsg tplr,%0" : "=r"(p->L));
+			asm volatile("movsg tppr,%0" : "=r"(p->P));
+			p++;
+		}
+
+		asm volatile("movgs %0,tplr" :: "r"(__debug_mmu.regs.tplr));
+		asm volatile("movgs %0,tppr" :: "r"(__debug_mmu.regs.tppr));
+		asm volatile("movgs %0,tpxr" :: "r"(__debug_mmu.regs.tpxr));
+	} while(0);
+#endif
+
+} /* end gdbstub_get_mmu_state() */
+
+/*
+ * handle general query commands of the form 'qXXXXX'
+ */
+static void gdbstub_handle_query(void)
+{
+	if (strcmp(input_buffer, "qAttached") == 0) {
+		/* return current thread ID */
+		sprintf(output_buffer, "1");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qC") == 0) {
+		/* return current thread ID */
+		sprintf(output_buffer, "QC 0");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qOffsets") == 0) {
+		/* return relocation offset of text and data segments */
+		sprintf(output_buffer, "Text=0;Data=0;Bss=0");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qSymbol::") == 0) {
+		sprintf(output_buffer, "OK");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qSupported") == 0) {
+		/* query of supported features */
+		sprintf(output_buffer, "PacketSize=%u;ReverseContinue-;ReverseStep-",
+			sizeof(input_buffer));
+		return;
+	}
+
+	gdbstub_strcpy(output_buffer,"E01");
+}
+
+/*****************************************************************************/
+/*
+ * handle event interception and GDB remote protocol processing
+ * - on entry:
+ *	PSR.ET==0, PSR.S==1 and the CPU is in debug mode
+ *	__debug_frame points to the saved registers
+ *	__frame points to the kernel mode exception frame, if it was in kernel
+ *      mode when the break happened
+ */
+void gdbstub(int sigval)
+{
+	unsigned long addr, length, loop, dbar, temp, temp2, temp3;
+	uint32_t zero;
+	char *ptr;
+	int flush_cache = 0;
+
+	LEDS(0x5000);
+
+	if (sigval < 0) {
+#ifndef CONFIG_GDBSTUB_IMMEDIATE
+		/* return immediately if GDB immediate activation option not set */
+		return;
+#else
+		sigval = SIGINT;
+#endif
+	}
+
+	save_user_regs(&__debug_frame0->uc);
+
+#if 0
+	gdbstub_printk("--> gdbstub() %08x %p %08x %08x\n",
+		       __debug_frame->pc,
+		       __debug_frame,
+		       __debug_regs->brr,
+		       __debug_regs->bpsr);
+//	gdbstub_show_regs();
+#endif
+
+	LEDS(0x5001);
+
+	/* if we were interrupted by input on the serial gdbstub serial port,
+	 * restore the context prior to the interrupt so that we return to that
+	 * directly
+	 */
+	temp = (unsigned long) __entry_kerneltrap_table;
+	temp2 = (unsigned long) __entry_usertrap_table;
+	temp3 = __debug_frame->pc & ~15;
+
+	if (temp3 == temp + TBR_TT_INTERRUPT_15 ||
+	    temp3 == temp2 + TBR_TT_INTERRUPT_15
+	    ) {
+		asm volatile("movsg pcsr,%0" : "=r"(__debug_frame->pc));
+		__debug_frame->psr |= PSR_ET;
+		__debug_frame->psr &= ~PSR_S;
+		if (__debug_frame->psr & PSR_PS)
+			__debug_frame->psr |= PSR_S;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
+		sigval = SIGINT;
+	}
+
+	/* handle the decrement timer going off (FR451 only) */
+	if (temp3 == temp + TBR_TT_DECREMENT_TIMER ||
+	    temp3 == temp2 + TBR_TT_DECREMENT_TIMER
+	    ) {
+		asm volatile("movgs %0,timerd" :: "r"(10000000));
+		asm volatile("movsg pcsr,%0" : "=r"(__debug_frame->pc));
+		__debug_frame->psr |= PSR_ET;
+		__debug_frame->psr &= ~PSR_S;
+		if (__debug_frame->psr & PSR_PS)
+			__debug_frame->psr |= PSR_S;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
+		sigval = SIGXCPU;
+	}
+
+	LEDS(0x5002);
+
+	/* after a BREAK insn, the PC lands on the far side of it */
+	if (__debug_status.brr & BRR_SB)
+		gdbstub_check_breakpoint();
+
+	LEDS(0x5003);
+
+	/* handle attempts to write console data via GDB "O" commands */
+	if (__debug_frame->pc == (unsigned long) gdbstub_console_write + 4) {
+		__gdbstub_console_write((struct console *) __debug_frame->gr8,
+					(const char *) __debug_frame->gr9,
+					(unsigned) __debug_frame->gr10);
+		goto done;
+	}
+
+	if (gdbstub_rx_unget) {
+		sigval = SIGINT;
+		goto packet_waiting;
+	}
+
+	if (!sigval)
+		sigval = gdbstub_compute_signal(__debug_status.brr);
+
+	LEDS(0x5004);
+
+	/* send a message to the debugger's user saying what happened if it may
+	 * not be clear cut (we can't map exceptions onto signals properly)
+	 */
+	if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
+		static const char title[] = "Break ";
+		static const char crlf[] = "\r\n";
+		unsigned long brr = __debug_status.brr;
+		char hx;
+
+		ptr = output_buffer;
+		*ptr++ = 'O';
+		ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
+
+		hx = hex_asc_hi(brr >> 24);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_lo(brr >> 24);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_hi(brr >> 16);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_lo(brr >> 16);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_hi(brr >> 8);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_lo(brr >> 8);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_hi(brr);
+		ptr = hex_byte_pack(ptr, hx);
+		hx = hex_asc_lo(brr);
+		ptr = hex_byte_pack(ptr, hx);
+
+		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+		*ptr = 0;
+		gdbstub_send_packet(output_buffer);	/* send it off... */
+	}
+
+	LEDS(0x5005);
+
+	/* tell the debugger that an exception has occurred */
+	ptr = output_buffer;
+
+	/* Send trap type (converted to signal) */
+	*ptr++ = 'T';
+	ptr = hex_byte_pack(ptr, sigval);
+
+	/* Send Error PC */
+	ptr = hex_byte_pack(ptr, GDB_REG_PC);
+	*ptr++ = ':';
+	ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
+	*ptr++ = ';';
+
+	/*
+	 * Send frame pointer
+	 */
+	ptr = hex_byte_pack(ptr, GDB_REG_FP);
+	*ptr++ = ':';
+	ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
+	*ptr++ = ';';
+
+	/*
+	 * Send stack pointer
+	 */
+	ptr = hex_byte_pack(ptr, GDB_REG_SP);
+	*ptr++ = ':';
+	ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
+	*ptr++ = ';';
+
+	*ptr++ = 0;
+	gdbstub_send_packet(output_buffer);	/* send it off... */
+
+	LEDS(0x5006);
+
+ packet_waiting:
+	gdbstub_get_mmu_state();
+
+	/* wait for input from remote GDB */
+	while (1) {
+		output_buffer[0] = 0;
+
+		LEDS(0x5007);
+		gdbstub_recv_packet(input_buffer);
+		LEDS(0x5600 | input_buffer[0]);
+
+		switch (input_buffer[0]) {
+			/* request repeat of last signal number */
+		case '?':
+			output_buffer[0] = 'S';
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
+			output_buffer[3] = 0;
+			break;
+
+		case 'd':
+			/* toggle debug flag */
+			break;
+
+			/* return the value of the CPU registers
+			 * - GR0,  GR1,  GR2,  GR3,  GR4,  GR5,  GR6,  GR7,
+			 * - GR8,  GR9,  GR10, GR11, GR12, GR13, GR14, GR15,
+			 * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23,
+			 * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31,
+			 * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39,
+			 * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47,
+			 * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55,
+			 * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63,
+			 * - FP0,  FP1,  FP2,  FP3,  FP4,  FP5,  FP6,  FP7,
+			 * - FP8,  FP9,  FP10, FP11, FP12, FP13, FP14, FP15,
+			 * - FP16, FP17, FP18, FP19, FP20, FP21, FP22, FP23,
+			 * - FP24, FP25, FP26, FP27, FP28, FP29, FP30, FP31,
+			 * - FP32, FP33, FP34, FP35, FP36, FP37, FP38, FP39,
+			 * - FP40, FP41, FP42, FP43, FP44, FP45, FP46, FP47,
+			 * - FP48, FP49, FP50, FP51, FP52, FP53, FP54, FP55,
+			 * - FP56, FP57, FP58, FP59, FP60, FP61, FP62, FP63,
+			 * - PC, PSR, CCR, CCCR,
+			 * - _X132, _X133, _X134
+			 * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3,
+			 * - _X141, _X142, _X143, _X144,
+			 * - LR, LCR
+			 */
+		case 'g':
+			zero = 0;
+			ptr = output_buffer;
+
+			/* deal with GR0, GR1-GR27, GR28-GR31, GR32-GR63 */
+			ptr = mem2hex(&zero, ptr, 4, 0);
+
+			for (loop = 1; loop <= 27; loop++)
+				ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
+			temp = (unsigned long) __frame;
+			ptr = mem2hex(&temp, ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[29], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[30], ptr, 4, 0);
+#ifdef CONFIG_MMU
+			ptr = mem2hex(&__debug_user_context->i.gr[31], ptr, 4, 0);
+#else
+			temp = (unsigned long) __debug_frame;
+			ptr = mem2hex(&temp, ptr, 4, 0);
+#endif
+
+			for (loop = 32; loop <= 63; loop++)
+				ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
+
+			/* deal with FR0-FR63 */
+			for (loop = 0; loop <= 63; loop++)
+				ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
+
+			/* deal with special registers */
+			ptr = mem2hex(&__debug_frame->pc,    ptr, 4, 0);
+			ptr = mem2hex(&__debug_frame->psr,   ptr, 4, 0);
+			ptr = mem2hex(&__debug_frame->ccr,   ptr, 4, 0);
+			ptr = mem2hex(&__debug_frame->cccr,  ptr, 4, 0);
+			ptr = mem2hex(&zero, ptr, 4, 0);
+			ptr = mem2hex(&zero, ptr, 4, 0);
+			ptr = mem2hex(&zero, ptr, 4, 0);
+			ptr = mem2hex(&__debug_frame->tbr,   ptr, 4, 0);
+			ptr = mem2hex(&__debug_status.brr ,   ptr, 4, 0);
+
+			asm volatile("movsg dbar0,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+			asm volatile("movsg dbar1,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+			asm volatile("movsg dbar2,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+			asm volatile("movsg dbar3,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+
+			asm volatile("movsg scr0,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+			asm volatile("movsg scr1,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+			asm volatile("movsg scr2,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+			asm volatile("movsg scr3,%0" : "=r"(dbar));
+			ptr = mem2hex(&dbar, ptr, 4, 0);
+
+			ptr = mem2hex(&__debug_frame->lr, ptr, 4, 0);
+			ptr = mem2hex(&__debug_frame->lcr, ptr, 4, 0);
+
+			ptr = mem2hex(&__debug_frame->iacc0, ptr, 8, 0);
+
+			ptr = mem2hex(&__debug_user_context->f.fsr[0], ptr, 4, 0);
+
+			for (loop = 0; loop <= 7; loop++)
+				ptr = mem2hex(&__debug_user_context->f.acc[loop], ptr, 4, 0);
+
+			ptr = mem2hex(&__debug_user_context->f.accg, ptr, 8, 0);
+
+			for (loop = 0; loop <= 1; loop++)
+				ptr = mem2hex(&__debug_user_context->f.msr[loop], ptr, 4, 0);
+
+			ptr = mem2hex(&__debug_frame->gner0, ptr, 4, 0);
+			ptr = mem2hex(&__debug_frame->gner1, ptr, 4, 0);
+
+			ptr = mem2hex(&__debug_user_context->f.fner[0], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fner[1], ptr, 4, 0);
+
+			break;
+
+			/* set the values of the CPU registers */
+		case 'G':
+			ptr = &input_buffer[1];
+
+			/* deal with GR0, GR1-GR27, GR28-GR31, GR32-GR63 */
+			ptr = hex2mem(ptr, &temp, 4);
+
+			for (loop = 1; loop <= 27; loop++)
+				ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
+
+			ptr = hex2mem(ptr, &temp, 4);
+			__frame = (struct pt_regs *) temp;
+			ptr = hex2mem(ptr, &__debug_frame->gr29, 4);
+			ptr = hex2mem(ptr, &__debug_frame->gr30, 4);
+#ifdef CONFIG_MMU
+			ptr = hex2mem(ptr, &__debug_frame->gr31, 4);
+#else
+			ptr = hex2mem(ptr, &temp, 4);
+#endif
+
+			for (loop = 32; loop <= 63; loop++)
+				ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
+
+			/* deal with FR0-FR63 */
+			for (loop = 0; loop <= 63; loop++)
+				ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
+
+			/* deal with special registers */
+			ptr = hex2mem(ptr, &__debug_frame->pc,  4);
+			ptr = hex2mem(ptr, &__debug_frame->psr, 4);
+			ptr = hex2mem(ptr, &__debug_frame->ccr, 4);
+			ptr = hex2mem(ptr, &__debug_frame->cccr,4);
+
+			for (loop = 132; loop <= 140; loop++)
+				ptr = hex2mem(ptr, &temp, 4);
+
+			ptr = hex2mem(ptr, &temp, 4);
+			asm volatile("movgs %0,scr0" :: "r"(temp));
+			ptr = hex2mem(ptr, &temp, 4);
+			asm volatile("movgs %0,scr1" :: "r"(temp));
+			ptr = hex2mem(ptr, &temp, 4);
+			asm volatile("movgs %0,scr2" :: "r"(temp));
+			ptr = hex2mem(ptr, &temp, 4);
+			asm volatile("movgs %0,scr3" :: "r"(temp));
+
+			ptr = hex2mem(ptr, &__debug_frame->lr,  4);
+			ptr = hex2mem(ptr, &__debug_frame->lcr, 4);
+
+			ptr = hex2mem(ptr, &__debug_frame->iacc0, 8);
+
+			ptr = hex2mem(ptr, &__debug_user_context->f.fsr[0], 4);
+
+			for (loop = 0; loop <= 7; loop++)
+				ptr = hex2mem(ptr, &__debug_user_context->f.acc[loop], 4);
+
+			ptr = hex2mem(ptr, &__debug_user_context->f.accg, 8);
+
+			for (loop = 0; loop <= 1; loop++)
+				ptr = hex2mem(ptr, &__debug_user_context->f.msr[loop], 4);
+
+			ptr = hex2mem(ptr, &__debug_frame->gner0, 4);
+			ptr = hex2mem(ptr, &__debug_frame->gner1, 4);
+
+			ptr = hex2mem(ptr, &__debug_user_context->f.fner[0], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fner[1], 4);
+
+			gdbstub_strcpy(output_buffer,"OK");
+			break;
+
+			/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+		case 'm':
+			ptr = &input_buffer[1];
+
+			if (hexToInt(&ptr, &addr) &&
+			    *ptr++ == ',' &&
+			    hexToInt(&ptr, &length)
+			    ) {
+				if (mem2hex((char *)addr, output_buffer, length, 1))
+					break;
+				gdbstub_strcpy (output_buffer, "E03");
+			}
+			else {
+				gdbstub_strcpy(output_buffer,"E01");
+			}
+			break;
+
+			/* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+		case 'M':
+			ptr = &input_buffer[1];
+
+			if (hexToInt(&ptr, &addr) &&
+			    *ptr++ == ',' &&
+			    hexToInt(&ptr, &length) &&
+			    *ptr++ == ':'
+			    ) {
+				if (hex2mem(ptr, (char *)addr, length)) {
+					gdbstub_strcpy(output_buffer, "OK");
+				}
+				else {
+					gdbstub_strcpy(output_buffer, "E03");
+				}
+			}
+			else
+				gdbstub_strcpy(output_buffer, "E02");
+
+			flush_cache = 1;
+			break;
+
+			/* pNN: Read value of reg N and return it */
+		case 'p':
+			/* return no value, indicating that we don't support
+			 * this command and that gdb should use 'g' instead */
+			break;
+
+			/* PNN,=RRRRRRRR: Write value R to reg N return OK */
+		case 'P':
+			ptr = &input_buffer[1];
+
+			if (!hexToInt(&ptr, &addr) ||
+			    *ptr++ != '=' ||
+			    !hexToInt(&ptr, &temp)
+			    ) {
+				gdbstub_strcpy(output_buffer, "E01");
+				break;
+			}
+
+			temp2 = 1;
+			switch (addr) {
+			case GDB_REG_GR(0):
+				break;
+			case GDB_REG_GR(1) ... GDB_REG_GR(63):
+				__debug_user_context->i.gr[addr - GDB_REG_GR(0)] = temp;
+				break;
+			case GDB_REG_FR(0) ... GDB_REG_FR(63):
+				__debug_user_context->f.fr[addr - GDB_REG_FR(0)] = temp;
+				break;
+			case GDB_REG_PC:
+				__debug_user_context->i.pc = temp;
+				break;
+			case GDB_REG_PSR:
+				__debug_user_context->i.psr = temp;
+				break;
+			case GDB_REG_CCR:
+				__debug_user_context->i.ccr = temp;
+				break;
+			case GDB_REG_CCCR:
+				__debug_user_context->i.cccr = temp;
+				break;
+			case GDB_REG_BRR:
+				__debug_status.brr = temp;
+				break;
+			case GDB_REG_LR:
+				__debug_user_context->i.lr = temp;
+				break;
+			case GDB_REG_LCR:
+				__debug_user_context->i.lcr = temp;
+				break;
+			case GDB_REG_FSR0:
+				__debug_user_context->f.fsr[0] = temp;
+				break;
+			case GDB_REG_ACC(0) ... GDB_REG_ACC(7):
+				__debug_user_context->f.acc[addr - GDB_REG_ACC(0)] = temp;
+				break;
+			case GDB_REG_ACCG(0):
+				*(uint32_t *) &__debug_user_context->f.accg[0] = temp;
+				break;
+			case GDB_REG_ACCG(4):
+				*(uint32_t *) &__debug_user_context->f.accg[4] = temp;
+				break;
+			case GDB_REG_MSR(0) ... GDB_REG_MSR(1):
+				__debug_user_context->f.msr[addr - GDB_REG_MSR(0)] = temp;
+				break;
+			case GDB_REG_GNER(0) ... GDB_REG_GNER(1):
+				__debug_user_context->i.gner[addr - GDB_REG_GNER(0)] = temp;
+				break;
+			case GDB_REG_FNER(0) ... GDB_REG_FNER(1):
+				__debug_user_context->f.fner[addr - GDB_REG_FNER(0)] = temp;
+				break;
+			default:
+				temp2 = 0;
+				break;
+			}
+
+			if (temp2) {
+				gdbstub_strcpy(output_buffer, "OK");
+			}
+			else {
+				gdbstub_strcpy(output_buffer, "E02");
+			}
+			break;
+
+			/* cAA..AA    Continue at address AA..AA(optional) */
+		case 'c':
+			/* try to read optional parameter, pc unchanged if no parm */
+			ptr = &input_buffer[1];
+			if (hexToInt(&ptr, &addr))
+				__debug_frame->pc = addr;
+			goto done;
+
+			/* kill the program */
+		case 'k' :
+			goto done;	/* just continue */
+
+			/* detach */
+		case 'D':
+			gdbstub_strcpy(output_buffer, "OK");
+			break;
+
+			/* reset the whole machine (FIXME: system dependent) */
+		case 'r':
+			break;
+
+
+			/* step to next instruction */
+		case 's':
+			__debug_regs->dcr |= DCR_SE;
+			__debug_status.dcr |= DCR_SE;
+			goto done;
+
+			/* extended command */
+		case 'v':
+			if (strcmp(input_buffer, "vCont?") == 0) {
+				output_buffer[0] = 0;
+				break;
+			}
+			goto unsupported_cmd;
+
+			/* set baud rate (bBB) */
+		case 'b':
+			ptr = &input_buffer[1];
+			if (!hexToInt(&ptr, &temp)) {
+				gdbstub_strcpy(output_buffer,"B01");
+				break;
+			}
+
+			if (temp) {
+				/* ack before changing speed */
+				gdbstub_send_packet("OK");
+				gdbstub_set_baud(temp);
+			}
+			break;
+
+			/* set breakpoint */
+		case 'Z':
+			ptr = &input_buffer[1];
+
+			if (!hexToInt(&ptr,&temp) || *ptr++ != ',' ||
+			    !hexToInt(&ptr,&addr) || *ptr++ != ',' ||
+			    !hexToInt(&ptr,&length)
+			    ) {
+				gdbstub_strcpy(output_buffer,"E01");
+				break;
+			}
+
+			if (temp >= 5) {
+				gdbstub_strcpy(output_buffer,"E03");
+				break;
+			}
+
+			if (gdbstub_set_breakpoint(temp, addr, length) < 0) {
+				gdbstub_strcpy(output_buffer,"E03");
+				break;
+			}
+
+			if (temp == 0)
+				flush_cache = 1; /* soft bkpt by modified memory */
+
+			gdbstub_strcpy(output_buffer,"OK");
+			break;
+
+			/* clear breakpoint */
+		case 'z':
+			ptr = &input_buffer[1];
+
+			if (!hexToInt(&ptr,&temp) || *ptr++ != ',' ||
+			    !hexToInt(&ptr,&addr) || *ptr++ != ',' ||
+			    !hexToInt(&ptr,&length)
+			    ) {
+				gdbstub_strcpy(output_buffer,"E01");
+				break;
+			}
+
+			if (temp >= 5) {
+				gdbstub_strcpy(output_buffer,"E03");
+				break;
+			}
+
+			if (gdbstub_clear_breakpoint(temp, addr, length) < 0) {
+				gdbstub_strcpy(output_buffer,"E03");
+				break;
+			}
+
+			if (temp == 0)
+				flush_cache = 1; /* soft bkpt by modified memory */
+
+			gdbstub_strcpy(output_buffer,"OK");
+			break;
+
+			/* Thread-setting packet */
+		case 'H':
+			gdbstub_strcpy(output_buffer, "OK");
+			break;
+
+		case 'q':
+			gdbstub_handle_query();
+			break;
+
+		default:
+		unsupported_cmd:
+			gdbstub_proto("### GDB Unsupported Cmd '%s'\n",input_buffer);
+			gdbstub_strcpy(output_buffer,"E01");
+			break;
+		}
+
+		/* reply to the request */
+		LEDS(0x5009);
+		gdbstub_send_packet(output_buffer);
+	}
+
+ done:
+	restore_user_regs(&__debug_frame0->uc);
+
+	//gdbstub_dump_debugregs();
+	//gdbstub_printk("<-- gdbstub() %08x\n", __debug_frame->pc);
+
+	/* need to flush the instruction cache before resuming, as we may have
+	 * deposited a breakpoint, and the icache probably has no way of
+	 * knowing that a data ref to some location may have changed something
+	 * that is in the instruction cache.  NB: We flush both caches, just to
+	 * be sure...
+	 */
+
+	/* note: flushing the icache will clobber EAR0 on the FR451 */
+	if (flush_cache)
+		gdbstub_purge_cache();
+
+	LEDS(0x5666);
+
+} /* end gdbstub() */
+
+/*****************************************************************************/
+/*
+ * initialise the GDB stub
+ */
+void __init gdbstub_init(void)
+{
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+	unsigned char ch;
+	int ret;
+#endif
+
+	gdbstub_printk("%s", gdbstub_banner);
+
+	gdbstub_io_init();
+
+	/* try to talk to GDB (or anyone insane enough to want to type GDB protocol by hand) */
+	gdbstub_proto("### GDB Tx ACK\n");
+	gdbstub_tx_char('+'); /* 'hello world' */
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+	gdbstub_printk("GDB Stub waiting for packet\n");
+
+	/*
+	 * In case GDB is started before us, ack any packets
+	 * (presumably "$?#xx") sitting there.
+	 */
+	do { gdbstub_rx_char(&ch, 0); } while (ch != '$');
+	do { gdbstub_rx_char(&ch, 0); } while (ch != '#');
+	do { ret = gdbstub_rx_char(&ch, 0); } while (ret != 0); /* eat first csum byte */
+	do { ret = gdbstub_rx_char(&ch, 0); } while (ret != 0); /* eat second csum byte */
+
+	gdbstub_proto("### GDB Tx NAK\n");
+	gdbstub_tx_char('-'); /* nak it */
+
+#else
+	gdbstub_printk("GDB Stub set\n");
+#endif
+
+#if 0
+	/* send banner */
+	ptr = output_buffer;
+	*ptr++ = 'O';
+	ptr = mem2hex(gdbstub_banner, ptr, sizeof(gdbstub_banner) - 1, 0);
+	gdbstub_send_packet(output_buffer);
+#endif
+#if defined(CONFIG_GDB_CONSOLE) && defined(CONFIG_GDBSTUB_IMMEDIATE)
+	register_console(&gdbstub_console);
+#endif
+
+} /* end gdbstub_init() */
+
+/*****************************************************************************/
+/*
+ * register the console at a more appropriate time
+ */
+#if defined (CONFIG_GDB_CONSOLE) && !defined(CONFIG_GDBSTUB_IMMEDIATE)
+static int __init gdbstub_postinit(void)
+{
+	printk("registering console\n");
+	register_console(&gdbstub_console);
+	return 0;
+} /* end gdbstub_postinit() */
+
+__initcall(gdbstub_postinit);
+#endif
+
+/*****************************************************************************/
+/*
+ * send an exit message to GDB
+ */
+void gdbstub_exit(int status)
+{
+	unsigned char checksum;
+	int count;
+	unsigned char ch;
+
+	sprintf(output_buffer,"W%02x",status&0xff);
+
+	gdbstub_tx_char('$');
+	checksum = 0;
+	count = 0;
+
+	while ((ch = output_buffer[count]) != 0) {
+		gdbstub_tx_char(ch);
+		checksum += ch;
+		count += 1;
+	}
+
+	gdbstub_tx_char('#');
+	gdbstub_tx_char(hex_asc_hi(checksum));
+	gdbstub_tx_char(hex_asc_lo(checksum));
+
+	/* make sure the output is flushed, or else RedBoot might clobber it */
+	gdbstub_tx_char('-');
+	gdbstub_tx_flush();
+
+} /* end gdbstub_exit() */
+
+/*****************************************************************************/
+/*
+ * GDB wants to call malloc() and free() to allocate memory for calling kernel
+ * functions directly from its command line
+ */
+static void *malloc(size_t size) __maybe_unused;
+static void *malloc(size_t size)
+{
+	return kmalloc(size, GFP_ATOMIC);
+}
+
+static void free(void *p) __maybe_unused;
+static void free(void *p)
+{
+	kfree(p);
+}
+
+static uint32_t ___get_HSR0(void) __maybe_unused;
+static uint32_t ___get_HSR0(void)
+{
+	return __get_HSR(0);
+}
+
+static uint32_t ___set_HSR0(uint32_t x) __maybe_unused;
+static uint32_t ___set_HSR0(uint32_t x)
+{
+	__set_HSR(0, x);
+	return __get_HSR(0);
+}
diff --git a/arch/frv/kernel/head-mmu-fr451.S b/arch/frv/kernel/head-mmu-fr451.S
new file mode 100644
index 00000000..98f87d58
--- /dev/null
+++ b/arch/frv/kernel/head-mmu-fr451.S
@@ -0,0 +1,374 @@
+/* head-mmu-fr451.S: FR451 mmu-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/mem-layout.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __400_DBR0	0xfe000e00
+#define __400_DBR1	0xfe000e08
+#define __400_DBR2	0xfe000e10
+#define __400_DBR3	0xfe000e18
+#define __400_DAM0	0xfe000f00
+#define __400_DAM1	0xfe000f08
+#define __400_DAM2	0xfe000f10
+#define __400_DAM3	0xfe000f18
+#define __400_LGCR	0xfe000010
+#define __400_LCR	0xfe000100
+#define __400_LSBR	0xfe000c00
+
+	__INIT
+	.balign		4
+
+###############################################################################
+#
+# describe the position and layout of the SDRAM controller registers
+#
+#	ENTRY:			EXIT:
+# GR5	-			cacheline size
+# GR11	-			displacement of 2nd SDRAM addr reg from GR14
+# GR12	-			displacement of 3rd SDRAM addr reg from GR14
+# GR13	-			displacement of 4th SDRAM addr reg from GR14
+# GR14	-			address of 1st SDRAM addr reg
+# GR15	-			amount to shift address by to match SDRAM addr reg
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+# CC0	-			T if DBR0 is present
+# CC1	-			T if DBR1 is present
+# CC2	-			T if DBR2 is present
+# CC3	-			T if DBR3 is present
+#
+###############################################################################
+	.globl		__head_fr451_describe_sdram
+__head_fr451_describe_sdram:
+	sethi.p		%hi(__400_DBR0),gr14
+	setlo		%lo(__400_DBR0),gr14
+	setlos.p	#__400_DBR1-__400_DBR0,gr11
+	setlos		#__400_DBR2-__400_DBR0,gr12
+	setlos.p	#__400_DBR3-__400_DBR0,gr13
+	setlos		#32,gr5			; cacheline size
+	setlos.p	#0,gr15			; amount to shift addr reg by
+	setlos		#0x00ff,gr4
+	movgs		gr4,cccr		; extant DARS/DAMK regs
+	bralr
+
+###############################################################################
+#
+# rearrange the bus controller registers
+#
+#	ENTRY:			EXIT:
+# GR26	&__head_reference	[saved]
+# GR30	LED address		revised LED address
+#
+###############################################################################
+	.globl		__head_fr451_set_busctl
+__head_fr451_set_busctl:
+	sethi.p		%hi(__400_LGCR),gr4
+	setlo		%lo(__400_LGCR),gr4
+	sethi.p		%hi(__400_LSBR),gr10
+	setlo		%lo(__400_LSBR),gr10
+	sethi.p		%hi(__400_LCR),gr11
+	setlo		%lo(__400_LCR),gr11
+
+	# set the bus controller
+	ldi		@(gr4,#0),gr5
+	ori		gr5,#0xff,gr5		; make sure all chip-selects are enabled
+	sti		gr5,@(gr4,#0)
+
+	sethi.p		%hi(__region_CS1),gr4
+	setlo		%lo(__region_CS1),gr4
+	sethi.p		%hi(__region_CS1_M),gr5
+	setlo		%lo(__region_CS1_M),gr5
+	sethi.p		%hi(__region_CS1_C),gr6
+	setlo		%lo(__region_CS1_C),gr6
+	sti		gr4,@(gr10,#1*0x08)
+	sti		gr5,@(gr10,#1*0x08+0x100)
+	sti		gr6,@(gr11,#1*0x08)
+	sethi.p		%hi(__region_CS2),gr4
+	setlo		%lo(__region_CS2),gr4
+	sethi.p		%hi(__region_CS2_M),gr5
+	setlo		%lo(__region_CS2_M),gr5
+	sethi.p		%hi(__region_CS2_C),gr6
+	setlo		%lo(__region_CS2_C),gr6
+	sti		gr4,@(gr10,#2*0x08)
+	sti		gr5,@(gr10,#2*0x08+0x100)
+	sti		gr6,@(gr11,#2*0x08)
+	sethi.p		%hi(__region_CS3),gr4
+	setlo		%lo(__region_CS3),gr4
+	sethi.p		%hi(__region_CS3_M),gr5
+	setlo		%lo(__region_CS3_M),gr5
+	sethi.p		%hi(__region_CS3_C),gr6
+	setlo		%lo(__region_CS3_C),gr6
+	sti		gr4,@(gr10,#3*0x08)
+	sti		gr5,@(gr10,#3*0x08+0x100)
+	sti		gr6,@(gr11,#3*0x08)
+	sethi.p		%hi(__region_CS4),gr4
+	setlo		%lo(__region_CS4),gr4
+	sethi.p		%hi(__region_CS4_M),gr5
+	setlo		%lo(__region_CS4_M),gr5
+	sethi.p		%hi(__region_CS4_C),gr6
+	setlo		%lo(__region_CS4_C),gr6
+	sti		gr4,@(gr10,#4*0x08)
+	sti		gr5,@(gr10,#4*0x08+0x100)
+	sti		gr6,@(gr11,#4*0x08)
+	sethi.p		%hi(__region_CS5),gr4
+	setlo		%lo(__region_CS5),gr4
+	sethi.p		%hi(__region_CS5_M),gr5
+	setlo		%lo(__region_CS5_M),gr5
+	sethi.p		%hi(__region_CS5_C),gr6
+	setlo		%lo(__region_CS5_C),gr6
+	sti		gr4,@(gr10,#5*0x08)
+	sti		gr5,@(gr10,#5*0x08+0x100)
+	sti		gr6,@(gr11,#5*0x08)
+	sethi.p		%hi(__region_CS6),gr4
+	setlo		%lo(__region_CS6),gr4
+	sethi.p		%hi(__region_CS6_M),gr5
+	setlo		%lo(__region_CS6_M),gr5
+	sethi.p		%hi(__region_CS6_C),gr6
+	setlo		%lo(__region_CS6_C),gr6
+	sti		gr4,@(gr10,#6*0x08)
+	sti		gr5,@(gr10,#6*0x08+0x100)
+	sti		gr6,@(gr11,#6*0x08)
+	sethi.p		%hi(__region_CS7),gr4
+	setlo		%lo(__region_CS7),gr4
+	sethi.p		%hi(__region_CS7_M),gr5
+	setlo		%lo(__region_CS7_M),gr5
+	sethi.p		%hi(__region_CS7_C),gr6
+	setlo		%lo(__region_CS7_C),gr6
+	sti		gr4,@(gr10,#7*0x08)
+	sti		gr5,@(gr10,#7*0x08+0x100)
+	sti		gr6,@(gr11,#7*0x08)
+	membar
+	bar
+
+	# adjust LED bank address
+#ifdef CONFIG_MB93091_VDK
+	sethi.p		%hi(__region_CS2 + 0x01200004),gr30
+	setlo		%lo(__region_CS2 + 0x01200004),gr30
+#endif
+	bralr
+
+###############################################################################
+#
+# determine the total SDRAM size
+#
+#	ENTRY:			EXIT:
+# GR25	-			SDRAM size
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr451_survey_sdram
+__head_fr451_survey_sdram:
+	sethi.p		%hi(__400_DAM0),gr11
+	setlo		%lo(__400_DAM0),gr11
+	sethi.p		%hi(__400_DBR0),gr12
+	setlo		%lo(__400_DBR0),gr12
+
+	sethi.p		%hi(0xfe000000),gr17		; unused SDRAM DBR value
+	setlo		%lo(0xfe000000),gr17
+	setlos		#0,gr25
+
+	ldi		@(gr12,#0x00),gr4		; DAR0
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS0
+	ldi		@(gr11,#0x00),gr6		; DAM0: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS0:
+
+	ldi		@(gr12,#0x08),gr4		; DAR1
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS1
+	ldi		@(gr11,#0x08),gr6		; DAM1: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS1:
+
+	ldi		@(gr12,#0x10),gr4		; DAR2
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS2
+	ldi		@(gr11,#0x10),gr6		; DAM2: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS2:
+
+	ldi		@(gr12,#0x18),gr4		; DAR3
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS3
+	ldi		@(gr11,#0x18),gr6		; DAM3: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS3:
+	bralr
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+#	ENTRY:			EXIT:
+# GR25	SDRAM size		[saved]
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+#
+# Using this map:
+#	REGISTERS	ADDRESS RANGE		VIEW
+#	===============	======================	===============================
+#	IAMPR0/DAMPR0	0xC0000000-0xCFFFFFFF	Cached kernel RAM Window
+#	DAMPR11		0xE0000000-0xFFFFFFFF	Uncached I/O
+#
+###############################################################################
+	.globl		__head_fr451_set_protection
+__head_fr451_set_protection:
+	movsg		lr,gr27
+
+	# set the I/O region protection registers for FR451 in MMU mode
+#define PGPROT_IO	xAMPRx_L|xAMPRx_M|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V
+
+	sethi.p		%hi(__region_IO),gr5
+	setlo		%lo(__region_IO),gr5
+	setlos		#PGPROT_IO|xAMPRx_SS_512Mb,gr4
+	or		gr4,gr5,gr4
+	movgs		gr5,damlr11			; General I/O tile
+	movgs		gr4,dampr11
+
+	# need to open a window onto at least part of the RAM for the kernel's use
+	sethi.p		%hi(__sdram_base),gr8
+	setlo		%lo(__sdram_base),gr8		; physical address
+	sethi.p		%hi(__page_offset),gr9
+	setlo		%lo(__page_offset),gr9		; virtual address
+
+	setlos		#xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr11
+	or		gr8,gr11,gr8
+
+	movgs		gr9,iamlr0			; mapped from real address 0
+	movgs		gr8,iampr0			; cached kernel memory at 0xC0000000
+	movgs		gr9,damlr0
+	movgs		gr8,dampr0
+
+	# set a temporary mapping for the kernel running at address 0 until we've turned on the MMU
+	sethi.p		%hi(__sdram_base),gr9
+	setlo		%lo(__sdram_base),gr9		; virtual address
+
+	and.p		gr4,gr11,gr4
+	and		gr5,gr11,gr5
+	or.p		gr4,gr11,gr4
+	or		gr5,gr11,gr5
+
+	movgs		gr9,iamlr1			; mapped from real address 0
+	movgs		gr8,iampr1			; cached kernel memory at 0x00000000
+	movgs		gr9,damlr1
+	movgs		gr8,dampr1
+
+	# we use DAMR2-10 for kmap_atomic(), cache flush and TLB management
+	# since the DAMLR regs are not going to change, we can set them now
+	# also set up IAMLR2 to the same as DAMLR5
+	sethi.p		%hi(KMAP_ATOMIC_PRIMARY_FRAME),gr4
+	setlo		%lo(KMAP_ATOMIC_PRIMARY_FRAME),gr4
+	sethi.p		%hi(PAGE_SIZE),gr5
+	setlo		%lo(PAGE_SIZE),gr5
+
+	movgs		gr4,damlr2
+	movgs		gr4,iamlr2
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr3
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr4
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr5
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr6
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr7
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr8
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr9
+	add		gr4,gr5,gr4
+	movgs		gr4,damlr10
+
+	movgs		gr0,dampr2
+	movgs		gr0,dampr4
+	movgs		gr0,dampr5
+	movgs		gr0,dampr6
+	movgs		gr0,dampr7
+	movgs		gr0,dampr8
+	movgs		gr0,dampr9
+	movgs		gr0,dampr10
+
+	movgs		gr0,iamlr3
+	movgs		gr0,iamlr4
+	movgs		gr0,iamlr5
+	movgs		gr0,iamlr6
+	movgs		gr0,iamlr7
+
+	movgs		gr0,iampr2
+	movgs		gr0,iampr3
+	movgs		gr0,iampr4
+	movgs		gr0,iampr5
+	movgs		gr0,iampr6
+	movgs		gr0,iampr7
+
+	# start in TLB context 0 with the swapper's page tables
+	movgs		gr0,cxnr
+
+	sethi.p		%hi(swapper_pg_dir),gr4
+	setlo		%lo(swapper_pg_dir),gr4
+	sethi.p		%hi(__page_offset),gr5
+	setlo		%lo(__page_offset),gr5
+	sub		gr4,gr5,gr4
+	movgs		gr4,ttbr
+	setlos		#xAMPRx_L|xAMPRx_M|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr5
+	or		gr4,gr5,gr4
+	movgs		gr4,dampr3
+
+	# the FR451 also has an extra trap base register
+	movsg		tbr,gr4
+	movgs		gr4,btbr
+
+	LEDS		0x3300
+	jmpl		@(gr27,gr0)
+
+###############################################################################
+#
+# finish setting up the protection registers
+#
+###############################################################################
+	.globl		__head_fr451_finalise_protection
+__head_fr451_finalise_protection:
+	# turn on the timers as appropriate
+	movgs		gr0,timerh
+	movgs		gr0,timerl
+	movgs		gr0,timerd
+	movsg		hsr0,gr4
+	sethi.p		%hi(HSR0_ETMI),gr5
+	setlo		%lo(HSR0_ETMI),gr5
+	or		gr4,gr5,gr4
+	movgs		gr4,hsr0
+
+	# clear the TLB entry cache
+	movgs		gr0,iamlr1
+	movgs		gr0,iampr1
+	movgs		gr0,damlr1
+	movgs		gr0,dampr1
+
+	# clear the PGE cache
+	sethi.p		%hi(__flush_tlb_all),gr4
+	setlo		%lo(__flush_tlb_all),gr4
+	jmpl		@(gr4,gr0)
diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S
new file mode 100644
index 00000000..438643cf
--- /dev/null
+++ b/arch/frv/kernel/head-uc-fr401.S
@@ -0,0 +1,311 @@
+/* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __400_DBR0	0xfe000e00
+#define __400_DBR1	0xfe000e08
+#define __400_DBR2	0xfe000e10	/* not on FR401 */
+#define __400_DBR3	0xfe000e18	/* not on FR401 */
+#define __400_DAM0	0xfe000f00
+#define __400_DAM1	0xfe000f08
+#define __400_DAM2	0xfe000f10	/* not on FR401 */
+#define __400_DAM3	0xfe000f18	/* not on FR401 */
+#define __400_LGCR	0xfe000010
+#define __400_LCR	0xfe000100
+#define __400_LSBR	0xfe000c00
+
+	__INIT
+	.balign		4
+
+###############################################################################
+#
+# describe the position and layout of the SDRAM controller registers
+#
+#	ENTRY:			EXIT:
+# GR5	-			cacheline size
+# GR11	-			displacement of 2nd SDRAM addr reg from GR14
+# GR12	-			displacement of 3rd SDRAM addr reg from GR14
+# GR13	-			displacement of 4th SDRAM addr reg from GR14
+# GR14	-			address of 1st SDRAM addr reg
+# GR15	-			amount to shift address by to match SDRAM addr reg
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+# CC0	-			T if DBR0 is present
+# CC1	-			T if DBR1 is present
+# CC2	-			T if DBR2 is present (not FR401/FR401A)
+# CC3	-			T if DBR3 is present (not FR401/FR401A)
+#
+###############################################################################
+	.globl		__head_fr401_describe_sdram
+__head_fr401_describe_sdram:
+	sethi.p		%hi(__400_DBR0),gr14
+	setlo		%lo(__400_DBR0),gr14
+	setlos.p	#__400_DBR1-__400_DBR0,gr11
+	setlos		#__400_DBR2-__400_DBR0,gr12
+	setlos.p	#__400_DBR3-__400_DBR0,gr13
+	setlos		#32,gr5			; cacheline size
+	setlos.p	#0,gr15			; amount to shift addr reg by
+
+	# specify which DBR regs are present
+	setlos		#0x00ff,gr4
+	movgs		gr4,cccr
+	movsg		psr,gr3			; check for FR401/FR401A
+	srli		gr3,#25,gr3
+	subicc		gr3,#0x20>>1,gr0,icc0
+	bnelr		icc0,#1
+	setlos		#0x000f,gr4
+	movgs		gr4,cccr
+	bralr
+
+###############################################################################
+#
+# rearrange the bus controller registers
+#
+#	ENTRY:			EXIT:
+# GR26	&__head_reference	[saved]
+# GR30	LED address		revised LED address
+#
+###############################################################################
+	.globl		__head_fr401_set_busctl
+__head_fr401_set_busctl:
+	sethi.p		%hi(__400_LGCR),gr4
+	setlo		%lo(__400_LGCR),gr4
+	sethi.p		%hi(__400_LSBR),gr10
+	setlo		%lo(__400_LSBR),gr10
+	sethi.p		%hi(__400_LCR),gr11
+	setlo		%lo(__400_LCR),gr11
+
+	# set the bus controller
+	ldi		@(gr4,#0),gr5
+	ori		gr5,#0xff,gr5		; make sure all chip-selects are enabled
+	sti		gr5,@(gr4,#0)
+
+	sethi.p		%hi(__region_CS1),gr4
+	setlo		%lo(__region_CS1),gr4
+	sethi.p		%hi(__region_CS1_M),gr5
+	setlo		%lo(__region_CS1_M),gr5
+	sethi.p		%hi(__region_CS1_C),gr6
+	setlo		%lo(__region_CS1_C),gr6
+	sti		gr4,@(gr10,#1*0x08)
+	sti		gr5,@(gr10,#1*0x08+0x100)
+	sti		gr6,@(gr11,#1*0x08)
+	sethi.p		%hi(__region_CS2),gr4
+	setlo		%lo(__region_CS2),gr4
+	sethi.p		%hi(__region_CS2_M),gr5
+	setlo		%lo(__region_CS2_M),gr5
+	sethi.p		%hi(__region_CS2_C),gr6
+	setlo		%lo(__region_CS2_C),gr6
+	sti		gr4,@(gr10,#2*0x08)
+	sti		gr5,@(gr10,#2*0x08+0x100)
+	sti		gr6,@(gr11,#2*0x08)
+	sethi.p		%hi(__region_CS3),gr4
+	setlo		%lo(__region_CS3),gr4
+	sethi.p		%hi(__region_CS3_M),gr5
+	setlo		%lo(__region_CS3_M),gr5
+	sethi.p		%hi(__region_CS3_C),gr6
+	setlo		%lo(__region_CS3_C),gr6
+	sti		gr4,@(gr10,#3*0x08)
+	sti		gr5,@(gr10,#3*0x08+0x100)
+	sti		gr6,@(gr11,#3*0x08)
+	sethi.p		%hi(__region_CS4),gr4
+	setlo		%lo(__region_CS4),gr4
+	sethi.p		%hi(__region_CS4_M),gr5
+	setlo		%lo(__region_CS4_M),gr5
+	sethi.p		%hi(__region_CS4_C),gr6
+	setlo		%lo(__region_CS4_C),gr6
+	sti		gr4,@(gr10,#4*0x08)
+	sti		gr5,@(gr10,#4*0x08+0x100)
+	sti		gr6,@(gr11,#4*0x08)
+	sethi.p		%hi(__region_CS5),gr4
+	setlo		%lo(__region_CS5),gr4
+	sethi.p		%hi(__region_CS5_M),gr5
+	setlo		%lo(__region_CS5_M),gr5
+	sethi.p		%hi(__region_CS5_C),gr6
+	setlo		%lo(__region_CS5_C),gr6
+	sti		gr4,@(gr10,#5*0x08)
+	sti		gr5,@(gr10,#5*0x08+0x100)
+	sti		gr6,@(gr11,#5*0x08)
+	sethi.p		%hi(__region_CS6),gr4
+	setlo		%lo(__region_CS6),gr4
+	sethi.p		%hi(__region_CS6_M),gr5
+	setlo		%lo(__region_CS6_M),gr5
+	sethi.p		%hi(__region_CS6_C),gr6
+	setlo		%lo(__region_CS6_C),gr6
+	sti		gr4,@(gr10,#6*0x08)
+	sti		gr5,@(gr10,#6*0x08+0x100)
+	sti		gr6,@(gr11,#6*0x08)
+	sethi.p		%hi(__region_CS7),gr4
+	setlo		%lo(__region_CS7),gr4
+	sethi.p		%hi(__region_CS7_M),gr5
+	setlo		%lo(__region_CS7_M),gr5
+	sethi.p		%hi(__region_CS7_C),gr6
+	setlo		%lo(__region_CS7_C),gr6
+	sti		gr4,@(gr10,#7*0x08)
+	sti		gr5,@(gr10,#7*0x08+0x100)
+	sti		gr6,@(gr11,#7*0x08)
+	membar
+	bar
+
+	# adjust LED bank address
+	sethi.p		%hi(LED_ADDR - 0x20000000 +__region_CS2),gr30
+	setlo		%lo(LED_ADDR - 0x20000000 +__region_CS2),gr30
+	bralr
+
+###############################################################################
+#
+# determine the total SDRAM size
+#
+#	ENTRY:			EXIT:
+# GR25	-			SDRAM size
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr401_survey_sdram
+__head_fr401_survey_sdram:
+	sethi.p		%hi(__400_DAM0),gr11
+	setlo		%lo(__400_DAM0),gr11
+	sethi.p		%hi(__400_DBR0),gr12
+	setlo		%lo(__400_DBR0),gr12
+
+	sethi.p		%hi(0xfe000000),gr17		; unused SDRAM DBR value
+	setlo		%lo(0xfe000000),gr17
+	setlos		#0,gr25
+
+	ldi		@(gr12,#0x00),gr4		; DAR0
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS0
+	ldi		@(gr11,#0x00),gr6		; DAM0: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS0:
+
+	ldi		@(gr12,#0x08),gr4		; DAR1
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS1
+	ldi		@(gr11,#0x08),gr6		; DAM1: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS1:
+
+	# FR401/FR401A does not have DCS2/3
+	movsg		psr,gr3
+	srli		gr3,#25,gr3
+	subicc		gr3,#0x20>>1,gr0,icc0
+	beq		icc0,#0,__head_no_DCS3
+
+	ldi		@(gr12,#0x10),gr4		; DAR2
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS2
+	ldi		@(gr11,#0x10),gr6		; DAM2: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS2:
+
+	ldi		@(gr12,#0x18),gr4		; DAR3
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS3
+	ldi		@(gr11,#0x18),gr6		; DAM3: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS3:
+	bralr
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+#	ENTRY:			EXIT:
+# GR25	SDRAM size		[saved]
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr401_set_protection
+__head_fr401_set_protection:
+	movsg		lr,gr27
+
+	# set the I/O region protection registers for FR401/3/5
+	sethi.p		%hi(__region_IO),gr5
+	setlo		%lo(__region_IO),gr5
+	ori		gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
+	movgs		gr0,iampr7
+	movgs		gr5,dampr7			; General I/O tile
+
+	# need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
+	# - start with the highest numbered registers
+	sethi.p		%hi(__kernel_image_end),gr8
+	setlo		%lo(__kernel_image_end),gr8
+	sethi.p		%hi(32768),gr4			; allow for a maximal allocator bitmap
+	setlo		%lo(32768),gr4
+	add		gr8,gr4,gr8
+	sethi.p		%hi(1024*2048-1),gr4		; round up to nearest 2MiB
+	setlo		%lo(1024*2048-1),gr4
+	add.p		gr8,gr4,gr8
+	not		gr4,gr4
+	and		gr8,gr4,gr8
+
+	sethi.p		%hi(__page_offset),gr9
+	setlo		%lo(__page_offset),gr9
+	add		gr9,gr25,gr9
+
+	# GR8 = base of uncovered RAM
+	# GR9 = top of uncovered RAM
+
+#ifdef CONFIG_MB93093_PDK
+	sethi.p		%hi(__region_CS2),gr4
+	setlo		%lo(__region_CS2),gr4
+	ori		gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4
+	movgs		gr4,dampr6
+	movgs		gr0,iampr6
+#else
+	call		__head_split_region
+	movgs		gr4,iampr6
+	movgs		gr5,dampr6
+#endif
+	call		__head_split_region
+	movgs		gr4,iampr5
+	movgs		gr5,dampr5
+	call		__head_split_region
+	movgs		gr4,iampr4
+	movgs		gr5,dampr4
+	call		__head_split_region
+	movgs		gr4,iampr3
+	movgs		gr5,dampr3
+	call		__head_split_region
+	movgs		gr4,iampr2
+	movgs		gr5,dampr2
+	call		__head_split_region
+	movgs		gr4,iampr1
+	movgs		gr5,dampr1
+
+	# cover kernel core image with kernel-only segment
+	sethi.p		%hi(__page_offset),gr8
+	setlo		%lo(__page_offset),gr8
+	call		__head_split_region
+
+#ifdef CONFIG_PROTECT_KERNEL
+	ori.p		gr4,#xAMPRx_S_KERNEL,gr4
+	ori		gr5,#xAMPRx_S_KERNEL,gr5
+#endif
+
+	movgs		gr4,iampr0
+	movgs		gr5,dampr0
+	jmpl		@(gr27,gr0)
diff --git a/arch/frv/kernel/head-uc-fr451.S b/arch/frv/kernel/head-uc-fr451.S
new file mode 100644
index 00000000..b2a76c4a
--- /dev/null
+++ b/arch/frv/kernel/head-uc-fr451.S
@@ -0,0 +1,174 @@
+/* head-uc-fr451.S: FR451 uc-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __400_DBR0	0xfe000e00
+#define __400_DBR1	0xfe000e08
+#define __400_DBR2	0xfe000e10
+#define __400_DBR3	0xfe000e18
+#define __400_DAM0	0xfe000f00
+#define __400_DAM1	0xfe000f08
+#define __400_DAM2	0xfe000f10
+#define __400_DAM3	0xfe000f18
+#define __400_LGCR	0xfe000010
+#define __400_LCR	0xfe000100
+#define __400_LSBR	0xfe000c00
+
+	__INIT
+	.balign		4
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+#	ENTRY:			EXIT:
+# GR25	SDRAM size		[saved]
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr451_set_protection
+__head_fr451_set_protection:
+	movsg		lr,gr27
+
+	movgs		gr0,dampr10
+	movgs		gr0,damlr10
+	movgs		gr0,dampr9
+	movgs		gr0,damlr9
+	movgs		gr0,dampr8
+	movgs		gr0,damlr8
+
+	# set the I/O region protection registers for FR401/3/5
+	sethi.p		%hi(__region_IO),gr5
+	setlo		%lo(__region_IO),gr5
+	sethi.p		%hi(0x1fffffff),gr7
+	setlo		%lo(0x1fffffff),gr7
+	ori		gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
+	movgs		gr5,dampr11			; General I/O tile
+	movgs		gr7,damlr11
+
+	# need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
+	# - start with the highest numbered registers
+	sethi.p		%hi(__kernel_image_end),gr8
+	setlo		%lo(__kernel_image_end),gr8
+	sethi.p		%hi(32768),gr4			; allow for a maximal allocator bitmap
+	setlo		%lo(32768),gr4
+	add		gr8,gr4,gr8
+	sethi.p		%hi(1024*2048-1),gr4		; round up to nearest 2MiB
+	setlo		%lo(1024*2048-1),gr4
+	add.p		gr8,gr4,gr8
+	not		gr4,gr4
+	and		gr8,gr4,gr8
+
+	sethi.p		%hi(__page_offset),gr9
+	setlo		%lo(__page_offset),gr9
+	add		gr9,gr25,gr9
+
+	sethi.p		%hi(0xffffc000),gr11
+	setlo		%lo(0xffffc000),gr11
+
+	# GR8 = base of uncovered RAM
+	# GR9 = top of uncovered RAM
+	# GR11 = xAMLR mask
+	LEDS		0x3317
+	call		__head_split_region
+	movgs		gr4,iampr7
+	movgs		gr6,iamlr7
+	movgs		gr5,dampr7
+	movgs		gr7,damlr7
+
+	LEDS		0x3316
+	call		__head_split_region
+	movgs		gr4,iampr6
+	movgs		gr6,iamlr6
+	movgs		gr5,dampr6
+	movgs		gr7,damlr6
+
+	LEDS		0x3315
+	call		__head_split_region
+	movgs		gr4,iampr5
+	movgs		gr6,iamlr5
+	movgs		gr5,dampr5
+	movgs		gr7,damlr5
+
+	LEDS		0x3314
+	call		__head_split_region
+	movgs		gr4,iampr4
+	movgs		gr6,iamlr4
+	movgs		gr5,dampr4
+	movgs		gr7,damlr4
+
+	LEDS		0x3313
+	call		__head_split_region
+	movgs		gr4,iampr3
+	movgs		gr6,iamlr3
+	movgs		gr5,dampr3
+	movgs		gr7,damlr3
+
+	LEDS		0x3312
+	call		__head_split_region
+	movgs		gr4,iampr2
+	movgs		gr6,iamlr2
+	movgs		gr5,dampr2
+	movgs		gr7,damlr2
+
+	LEDS		0x3311
+	call		__head_split_region
+	movgs		gr4,iampr1
+	movgs		gr6,iamlr1
+	movgs		gr5,dampr1
+	movgs		gr7,damlr1
+
+	# cover kernel core image with kernel-only segment
+	LEDS		0x3310
+	sethi.p		%hi(__page_offset),gr8
+	setlo		%lo(__page_offset),gr8
+	call		__head_split_region
+
+#ifdef CONFIG_PROTECT_KERNEL
+	ori.p		gr4,#xAMPRx_S_KERNEL,gr4
+	ori		gr5,#xAMPRx_S_KERNEL,gr5
+#endif
+
+	movgs		gr4,iampr0
+	movgs		gr6,iamlr0
+	movgs		gr5,dampr0
+	movgs		gr7,damlr0
+
+	# start in TLB context 0 with no page tables
+	movgs		gr0,cxnr
+	movgs		gr0,ttbr
+
+	# the FR451 also has an extra trap base register
+	movsg		tbr,gr4
+	movgs		gr4,btbr
+
+	# turn on the timers as appropriate
+	movgs		gr0,timerh
+	movgs		gr0,timerl
+	movgs		gr0,timerd
+	movsg		hsr0,gr4
+	sethi.p		%hi(HSR0_ETMI),gr5
+	setlo		%lo(HSR0_ETMI),gr5
+	or		gr4,gr5,gr4
+	movgs		gr4,hsr0
+
+	LEDS		0x3300
+	jmpl		@(gr27,gr0)
diff --git a/arch/frv/kernel/head-uc-fr555.S b/arch/frv/kernel/head-uc-fr555.S
new file mode 100644
index 00000000..5497aaf3
--- /dev/null
+++ b/arch/frv/kernel/head-uc-fr555.S
@@ -0,0 +1,347 @@
+/* head-uc-fr555.S: FR555 uc-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __551_DARS0	0xfeff0100
+#define __551_DARS1	0xfeff0104
+#define __551_DARS2	0xfeff0108
+#define __551_DARS3	0xfeff010c
+#define __551_DAMK0	0xfeff0110
+#define __551_DAMK1	0xfeff0114
+#define __551_DAMK2	0xfeff0118
+#define __551_DAMK3	0xfeff011c
+#define __551_LCR	0xfeff1100
+#define __551_LSBR	0xfeff1c00
+
+	__INIT
+	.balign		4
+
+###############################################################################
+#
+# describe the position and layout of the SDRAM controller registers
+#
+#	ENTRY:			EXIT:
+# GR5	-			cacheline size
+# GR11	-			displacement of 2nd SDRAM addr reg from GR14
+# GR12	-			displacement of 3rd SDRAM addr reg from GR14
+# GR13	-			displacement of 4th SDRAM addr reg from GR14
+# GR14	-			address of 1st SDRAM addr reg
+# GR15	-			amount to shift address by to match SDRAM addr reg
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+# CC0	-			T if DARS0 is present
+# CC1	-			T if DARS1 is present
+# CC2	-			T if DARS2 is present
+# CC3	-			T if DARS3 is present
+#
+###############################################################################
+	.globl		__head_fr555_describe_sdram
+__head_fr555_describe_sdram:
+	sethi.p		%hi(__551_DARS0),gr14
+	setlo		%lo(__551_DARS0),gr14
+	setlos.p	#__551_DARS1-__551_DARS0,gr11
+	setlos		#__551_DARS2-__551_DARS0,gr12
+	setlos.p	#__551_DARS3-__551_DARS0,gr13
+	setlos		#64,gr5			; cacheline size
+	setlos		#20,gr15		; amount to shift addr by
+	setlos		#0x00ff,gr4
+	movgs		gr4,cccr		; extant DARS/DAMK regs
+	bralr
+
+###############################################################################
+#
+# rearrange the bus controller registers
+#
+#	ENTRY:			EXIT:
+# GR26	&__head_reference	[saved]
+# GR30	LED address		revised LED address
+#
+###############################################################################
+	.globl		__head_fr555_set_busctl
+__head_fr555_set_busctl:
+	LEDS		0x100f
+	sethi.p		%hi(__551_LSBR),gr10
+	setlo		%lo(__551_LSBR),gr10
+	sethi.p		%hi(__551_LCR),gr11
+	setlo		%lo(__551_LCR),gr11
+
+	# set the bus controller
+	sethi.p		%hi(__region_CS1),gr4
+	setlo		%lo(__region_CS1),gr4
+	sethi.p		%hi(__region_CS1_M),gr5
+	setlo		%lo(__region_CS1_M),gr5
+	sethi.p		%hi(__region_CS1_C),gr6
+	setlo		%lo(__region_CS1_C),gr6
+	sti		gr4,@(gr10,#1*0x08)
+	sti		gr5,@(gr10,#1*0x08+0x100)
+	sti		gr6,@(gr11,#1*0x08)
+	sethi.p		%hi(__region_CS2),gr4
+	setlo		%lo(__region_CS2),gr4
+	sethi.p		%hi(__region_CS2_M),gr5
+	setlo		%lo(__region_CS2_M),gr5
+	sethi.p		%hi(__region_CS2_C),gr6
+	setlo		%lo(__region_CS2_C),gr6
+	sti		gr4,@(gr10,#2*0x08)
+	sti		gr5,@(gr10,#2*0x08+0x100)
+	sti		gr6,@(gr11,#2*0x08)
+	sethi.p		%hi(__region_CS3),gr4
+	setlo		%lo(__region_CS3),gr4
+	sethi.p		%hi(__region_CS3_M),gr5
+	setlo		%lo(__region_CS3_M),gr5
+	sethi.p		%hi(__region_CS3_C),gr6
+	setlo		%lo(__region_CS3_C),gr6
+	sti		gr4,@(gr10,#3*0x08)
+	sti		gr5,@(gr10,#3*0x08+0x100)
+	sti		gr6,@(gr11,#3*0x08)
+	sethi.p		%hi(__region_CS4),gr4
+	setlo		%lo(__region_CS4),gr4
+	sethi.p		%hi(__region_CS4_M),gr5
+	setlo		%lo(__region_CS4_M),gr5
+	sethi.p		%hi(__region_CS4_C),gr6
+	setlo		%lo(__region_CS4_C),gr6
+	sti		gr4,@(gr10,#4*0x08)
+	sti		gr5,@(gr10,#4*0x08+0x100)
+	sti		gr6,@(gr11,#4*0x08)
+	sethi.p		%hi(__region_CS5),gr4
+	setlo		%lo(__region_CS5),gr4
+	sethi.p		%hi(__region_CS5_M),gr5
+	setlo		%lo(__region_CS5_M),gr5
+	sethi.p		%hi(__region_CS5_C),gr6
+	setlo		%lo(__region_CS5_C),gr6
+	sti		gr4,@(gr10,#5*0x08)
+	sti		gr5,@(gr10,#5*0x08+0x100)
+	sti		gr6,@(gr11,#5*0x08)
+	sethi.p		%hi(__region_CS6),gr4
+	setlo		%lo(__region_CS6),gr4
+	sethi.p		%hi(__region_CS6_M),gr5
+	setlo		%lo(__region_CS6_M),gr5
+	sethi.p		%hi(__region_CS6_C),gr6
+	setlo		%lo(__region_CS6_C),gr6
+	sti		gr4,@(gr10,#6*0x08)
+	sti		gr5,@(gr10,#6*0x08+0x100)
+	sti		gr6,@(gr11,#6*0x08)
+	sethi.p		%hi(__region_CS7),gr4
+	setlo		%lo(__region_CS7),gr4
+	sethi.p		%hi(__region_CS7_M),gr5
+	setlo		%lo(__region_CS7_M),gr5
+	sethi.p		%hi(__region_CS7_C),gr6
+	setlo		%lo(__region_CS7_C),gr6
+	sti		gr4,@(gr10,#7*0x08)
+	sti		gr5,@(gr10,#7*0x08+0x100)
+	sti		gr6,@(gr11,#7*0x08)
+	membar
+	bar
+
+	# adjust LED bank address
+#ifdef CONFIG_MB93091_VDK
+	sethi.p		%hi(LED_ADDR - 0x20000000 +__region_CS2),gr30
+	setlo		%lo(LED_ADDR - 0x20000000 +__region_CS2),gr30
+#endif
+	bralr
+
+###############################################################################
+#
+# determine the total SDRAM size
+#
+#	ENTRY:			EXIT:
+# GR25	-			SDRAM size
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr555_survey_sdram
+__head_fr555_survey_sdram:
+	sethi.p		%hi(__551_DAMK0),gr11
+	setlo		%lo(__551_DAMK0),gr11
+	sethi.p		%hi(__551_DARS0),gr12
+	setlo		%lo(__551_DARS0),gr12
+
+	sethi.p		%hi(0xfff),gr17			; unused SDRAM AMK value
+	setlo		%lo(0xfff),gr17
+	setlos		#0,gr25
+
+	ldi		@(gr11,#0x00),gr6		; DAMK0: bits 11:0 match addr 11:0
+	subcc		gr6,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS0
+	ldi		@(gr12,#0x00),gr4		; DARS0
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS0:
+
+	ldi		@(gr11,#0x04),gr6		; DAMK1: bits 11:0 match addr 11:0
+	subcc		gr6,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS1
+	ldi		@(gr12,#0x04),gr4		; DARS1
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS1:
+
+	ldi		@(gr11,#0x8),gr6		; DAMK2: bits 11:0 match addr 11:0
+	subcc		gr6,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS2
+	ldi		@(gr12,#0x8),gr4		; DARS2
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS2:
+
+	ldi		@(gr11,#0xc),gr6		; DAMK3: bits 11:0 match addr 11:0
+	subcc		gr6,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS3
+	ldi		@(gr12,#0xc),gr4		; DARS3
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS3:
+
+	slli		gr25,#20,gr25			; shift [11:0] -> [31:20]
+	bralr
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+#	ENTRY:			EXIT:
+# GR25	SDRAM size		saved
+# GR30	LED address		saved
+#
+###############################################################################
+	.globl		__head_fr555_set_protection
+__head_fr555_set_protection:
+	movsg		lr,gr27
+
+	sethi.p		%hi(0xfff00000),gr11
+	setlo		%lo(0xfff00000),gr11
+
+	# set the I/O region protection registers for FR555
+	sethi.p		%hi(__region_IO),gr7
+	setlo		%lo(__region_IO),gr7
+	ori		gr7,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
+	movgs		gr0,iampr15
+	movgs		gr0,iamlr15
+	movgs		gr5,dampr15
+	movgs		gr7,damlr15
+
+	# need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
+	# - start with the highest numbered registers
+	sethi.p		%hi(__kernel_image_end),gr8
+	setlo		%lo(__kernel_image_end),gr8
+	sethi.p		%hi(32768),gr4			; allow for a maximal allocator bitmap
+	setlo		%lo(32768),gr4
+	add		gr8,gr4,gr8
+	sethi.p		%hi(1024*2048-1),gr4		; round up to nearest 2MiB
+	setlo		%lo(1024*2048-1),gr4
+	add.p		gr8,gr4,gr8
+	not		gr4,gr4
+	and		gr8,gr4,gr8
+
+	sethi.p		%hi(__page_offset),gr9
+	setlo		%lo(__page_offset),gr9
+	add		gr9,gr25,gr9
+
+	# GR8 = base of uncovered RAM
+	# GR9 = top of uncovered RAM
+	# GR11 - mask for DAMLR/IAMLR regs
+	#
+	call		__head_split_region
+	movgs		gr4,iampr14
+	movgs		gr6,iamlr14
+	movgs		gr5,dampr14
+	movgs		gr7,damlr14
+	call		__head_split_region
+	movgs		gr4,iampr13
+	movgs		gr6,iamlr13
+	movgs		gr5,dampr13
+	movgs		gr7,damlr13
+	call		__head_split_region
+	movgs		gr4,iampr12
+	movgs		gr6,iamlr12
+	movgs		gr5,dampr12
+	movgs		gr7,damlr12
+	call		__head_split_region
+	movgs		gr4,iampr11
+	movgs		gr6,iamlr11
+	movgs		gr5,dampr11
+	movgs		gr7,damlr11
+	call		__head_split_region
+	movgs		gr4,iampr10
+	movgs		gr6,iamlr10
+	movgs		gr5,dampr10
+	movgs		gr7,damlr10
+	call		__head_split_region
+	movgs		gr4,iampr9
+	movgs		gr6,iamlr9
+	movgs		gr5,dampr9
+	movgs		gr7,damlr9
+	call		__head_split_region
+	movgs		gr4,iampr8
+	movgs		gr6,iamlr8
+	movgs		gr5,dampr8
+	movgs		gr7,damlr8
+
+	call		__head_split_region
+	movgs		gr4,iampr7
+	movgs		gr6,iamlr7
+	movgs		gr5,dampr7
+	movgs		gr7,damlr7
+	call		__head_split_region
+	movgs		gr4,iampr6
+	movgs		gr6,iamlr6
+	movgs		gr5,dampr6
+	movgs		gr7,damlr6
+	call		__head_split_region
+	movgs		gr4,iampr5
+	movgs		gr6,iamlr5
+	movgs		gr5,dampr5
+	movgs		gr7,damlr5
+	call		__head_split_region
+	movgs		gr4,iampr4
+	movgs		gr6,iamlr4
+	movgs		gr5,dampr4
+	movgs		gr7,damlr4
+	call		__head_split_region
+	movgs		gr4,iampr3
+	movgs		gr6,iamlr3
+	movgs		gr5,dampr3
+	movgs		gr7,damlr3
+	call		__head_split_region
+	movgs		gr4,iampr2
+	movgs		gr6,iamlr2
+	movgs		gr5,dampr2
+	movgs		gr7,damlr2
+	call		__head_split_region
+	movgs		gr4,iampr1
+	movgs		gr6,iamlr1
+	movgs		gr5,dampr1
+	movgs		gr7,damlr1
+
+	# cover kernel core image with kernel-only segment
+	sethi.p		%hi(__page_offset),gr8
+	setlo		%lo(__page_offset),gr8
+	call		__head_split_region
+
+#ifdef CONFIG_PROTECT_KERNEL
+	ori.p		gr4,#xAMPRx_S_KERNEL,gr4
+	ori		gr5,#xAMPRx_S_KERNEL,gr5
+#endif
+
+	movgs		gr4,iampr0
+	movgs		gr6,iamlr0
+	movgs		gr5,dampr0
+	movgs		gr7,damlr0
+	jmpl		@(gr27,gr0)
diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S
new file mode 100644
index 00000000..e9a8cc63
--- /dev/null
+++ b/arch/frv/kernel/head.S
@@ -0,0 +1,643 @@
+/* head.S: kernel entry point for FR-V kernel
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include <asm/cache.h>
+#include "head.inc"
+
+###############################################################################
+#
+# void _boot(unsigned long magic, char *command_line) __attribute__((noreturn))
+#
+# - if magic is 0xdead1eaf, then command_line is assumed to point to the kernel
+#   command line string
+#
+###############################################################################
+	__HEAD
+	.balign		4
+
+	.globl		_boot, __head_reference
+        .type		_boot,@function
+_boot:
+__head_reference:
+	sethi.p		%hi(LED_ADDR),gr30
+	setlo		%lo(LED_ADDR),gr30
+
+	LEDS		0x0000
+
+	# calculate reference address for PC-relative stuff
+	call		0f
+0:	movsg		lr,gr26
+	addi		gr26,#__head_reference-0b,gr26
+
+	# invalidate and disable both of the caches and turn off the memory access checking
+	dcef		@(gr0,gr0),1
+	bar
+
+	sethi.p		%hi(~(HSR0_ICE|HSR0_DCE|HSR0_CBM|HSR0_EIMMU|HSR0_EDMMU)),gr4
+	setlo		%lo(~(HSR0_ICE|HSR0_DCE|HSR0_CBM|HSR0_EIMMU|HSR0_EDMMU)),gr4
+	movsg		hsr0,gr5
+	and		gr4,gr5,gr5
+	movgs		gr5,hsr0
+	movsg		hsr0,gr5
+
+	LEDS		0x0001
+
+	icei		@(gr0,gr0),1
+	dcei		@(gr0,gr0),1
+	bar
+
+	# turn the instruction cache back on
+	sethi.p		%hi(HSR0_ICE),gr4
+	setlo		%lo(HSR0_ICE),gr4
+	movsg		hsr0,gr5
+	or		gr4,gr5,gr5
+	movgs		gr5,hsr0
+	movsg		hsr0,gr5
+
+	bar
+
+	LEDS		0x0002
+
+	# retrieve the parameters (including command line) before we overwrite them
+	sethi.p		%hi(0xdead1eaf),gr7
+	setlo		%lo(0xdead1eaf),gr7
+	subcc		gr7,gr8,gr0,icc0
+	bne		icc0,#0,__head_no_parameters
+
+	sethi.p		%hi(redboot_command_line-1),gr6
+	setlo		%lo(redboot_command_line-1),gr6
+	sethi.p		%hi(__head_reference),gr4
+	setlo		%lo(__head_reference),gr4
+	sub		gr6,gr4,gr6
+	add.p		gr6,gr26,gr6
+	subi		gr9,#1,gr9
+	setlos.p	#511,gr4
+	setlos		#1,gr5
+
+__head_copy_cmdline:
+	ldubu.p		@(gr9,gr5),gr16
+	subicc		gr4,#1,gr4,icc0
+	stbu.p		gr16,@(gr6,gr5)
+	subicc		gr16,#0,gr0,icc1
+	bls		icc0,#0,__head_end_cmdline
+	bne		icc1,#1,__head_copy_cmdline
+__head_end_cmdline:
+	stbu		gr0,@(gr6,gr5)
+__head_no_parameters:
+
+###############################################################################
+#
+# we need to relocate the SDRAM to 0x00000000 (linux) or 0xC0000000 (uClinux)
+# - note that we're going to have to run entirely out of the icache whilst
+#   fiddling with the SDRAM controller registers
+#
+###############################################################################
+#ifdef CONFIG_MMU
+	call		__head_fr451_describe_sdram
+
+#else
+	movsg		psr,gr5
+	srli		gr5,#28,gr5
+	subicc		gr5,#3,gr0,icc0
+	beq		icc0,#0,__head_fr551_sdram
+
+	call		__head_fr401_describe_sdram
+	bra		__head_do_sdram
+
+__head_fr551_sdram:
+	call		__head_fr555_describe_sdram
+	LEDS		0x000d
+
+__head_do_sdram:
+#endif
+
+	# preload the registers with invalid values in case any DBR/DARS are marked not present
+	sethi.p		%hi(0xfe000000),gr17		; unused SDRAM DBR value
+	setlo		%lo(0xfe000000),gr17
+	or.p		gr17,gr0,gr20
+	or		gr17,gr0,gr21
+	or.p		gr17,gr0,gr22
+	or		gr17,gr0,gr23
+
+	# consult the SDRAM controller CS address registers
+	cld		@(gr14,gr0 ),gr20,	cc0,#1	; DBR0 / DARS0
+	cld		@(gr14,gr11),gr21,	cc1,#1	; DBR1 / DARS1
+	cld		@(gr14,gr12),gr22,	cc2,#1	; DBR2 / DARS2
+	cld.p		@(gr14,gr13),gr23,	cc3,#1	; DBR3 / DARS3
+
+	sll		gr20,gr15,gr20			; shift values up for FR551
+	sll		gr21,gr15,gr21
+	sll		gr22,gr15,gr22
+	sll		gr23,gr15,gr23
+
+	LEDS		0x0003
+
+	# assume the lowest valid CS line to be the SDRAM base and get its address
+	subcc		gr20,gr17,gr0,icc0
+	subcc.p		gr21,gr17,gr0,icc1
+	subcc		gr22,gr17,gr0,icc2
+	subcc.p		gr23,gr17,gr0,icc3
+	ckne		icc0,cc4			; T if DBR0 != 0xfe000000
+	ckne		icc1,cc5
+	ckne		icc2,cc6
+	ckne		icc3,cc7
+	cor		gr23,gr0,gr24,		cc7,#1	; GR24 = SDRAM base
+	cor		gr22,gr0,gr24,		cc6,#1
+	cor		gr21,gr0,gr24,		cc5,#1
+	cor		gr20,gr0,gr24,		cc4,#1
+
+	# calculate the displacement required to get the SDRAM into the right place in memory
+	sethi.p		%hi(__sdram_base),gr16
+	setlo		%lo(__sdram_base),gr16
+	sub		gr16,gr24,gr16			; delta = __sdram_base - DBRx
+
+	# calculate the new values to go in the controller regs
+	cadd.p		gr20,gr16,gr20,		cc4,#1	; DCS#0 (new) = DCS#0 (old) + delta
+	cadd		gr21,gr16,gr21,		cc5,#1
+	cadd.p		gr22,gr16,gr22,		cc6,#1
+	cadd		gr23,gr16,gr23,		cc7,#1
+
+	srl		gr20,gr15,gr20			; shift values down for FR551
+	srl		gr21,gr15,gr21
+	srl		gr22,gr15,gr22
+	srl		gr23,gr15,gr23
+
+	# work out the address at which the reg updater resides and lock it into icache
+	# also work out the address the updater will jump to when finished
+	sethi.p		%hi(__head_move_sdram-__head_reference),gr18
+	setlo		%lo(__head_move_sdram-__head_reference),gr18
+	sethi.p		%hi(__head_sdram_moved-__head_reference),gr19
+	setlo		%lo(__head_sdram_moved-__head_reference),gr19
+	add.p		gr18,gr26,gr18
+	add		gr19,gr26,gr19
+	add.p		gr19,gr16,gr19			; moved = addr + (__sdram_base - DBRx)
+	add		gr18,gr5,gr4			; two cachelines probably required
+
+	icpl		gr18,gr0,#1			; load and lock the cachelines
+	icpl		gr4,gr0,#1
+	LEDS		0x0004
+	membar
+	bar
+	jmpl		@(gr18,gr0)
+
+	.balign		L1_CACHE_BYTES
+__head_move_sdram:
+	cst		gr20,@(gr14,gr0 ),	cc4,#1
+	cst		gr21,@(gr14,gr11),	cc5,#1
+	cst		gr22,@(gr14,gr12),	cc6,#1
+	cst		gr23,@(gr14,gr13),	cc7,#1
+	cld		@(gr14,gr0 ),gr20,	cc4,#1
+	cld		@(gr14,gr11),gr21,	cc5,#1
+	cld		@(gr14,gr12),gr22,	cc4,#1
+	cld		@(gr14,gr13),gr23,	cc7,#1
+	bar
+	membar
+	jmpl		@(gr19,gr0)
+
+	.balign		L1_CACHE_BYTES
+__head_sdram_moved:
+	icul		gr18
+	add		gr18,gr5,gr4
+	icul		gr4
+	icei		@(gr0,gr0),1
+	dcei		@(gr0,gr0),1
+
+	LEDS		0x0005
+
+	# recalculate reference address
+	call		0f
+0:	movsg		lr,gr26
+	addi		gr26,#__head_reference-0b,gr26
+
+
+###############################################################################
+#
+# move the kernel image down to the bottom of the SDRAM
+#
+###############################################################################
+	sethi.p		%hi(__kernel_image_size_no_bss+15),gr4
+	setlo		%lo(__kernel_image_size_no_bss+15),gr4
+	srli.p		gr4,#4,gr4			; count
+	or		gr26,gr26,gr16			; source
+
+	sethi.p		%hi(__sdram_base),gr17		; destination
+	setlo		%lo(__sdram_base),gr17
+
+	setlos		#8,gr5
+	sub.p		gr16,gr5,gr16			; adjust src for LDDU
+	sub		gr17,gr5,gr17			; adjust dst for LDDU
+
+	sethi.p		%hi(__head_move_kernel-__head_reference),gr18
+	setlo		%lo(__head_move_kernel-__head_reference),gr18
+	sethi.p		%hi(__head_kernel_moved-__head_reference+__sdram_base),gr19
+	setlo		%lo(__head_kernel_moved-__head_reference+__sdram_base),gr19
+	add		gr18,gr26,gr18
+	icpl		gr18,gr0,#1
+	jmpl		@(gr18,gr0)
+
+	.balign		32
+__head_move_kernel:
+	lddu		@(gr16,gr5),gr10
+	lddu		@(gr16,gr5),gr12
+	stdu.p		gr10,@(gr17,gr5)
+	subicc		gr4,#1,gr4,icc0
+	stdu.p		gr12,@(gr17,gr5)
+	bhi		icc0,#0,__head_move_kernel
+	jmpl		@(gr19,gr0)
+
+	.balign		32
+__head_kernel_moved:
+	icul		gr18
+	icei		@(gr0,gr0),1
+	dcei		@(gr0,gr0),1
+
+	LEDS		0x0006
+
+	# recalculate reference address
+	call		0f
+0:	movsg		lr,gr26
+	addi		gr26,#__head_reference-0b,gr26
+
+
+###############################################################################
+#
+# rearrange the iomem map and set the protection registers
+#
+###############################################################################
+
+#ifdef CONFIG_MMU
+	LEDS		0x3301
+	call		__head_fr451_set_busctl
+	LEDS		0x3303
+	call		__head_fr451_survey_sdram
+	LEDS		0x3305
+	call		__head_fr451_set_protection
+
+#else
+	movsg		psr,gr5
+	srli		gr5,#PSR_IMPLE_SHIFT,gr5
+	subicc		gr5,#PSR_IMPLE_FR551,gr0,icc0
+	beq		icc0,#0,__head_fr555_memmap
+	subicc		gr5,#PSR_IMPLE_FR451,gr0,icc0
+	beq		icc0,#0,__head_fr451_memmap
+
+	LEDS		0x3101
+	call		__head_fr401_set_busctl
+	LEDS		0x3103
+	call		__head_fr401_survey_sdram
+	LEDS		0x3105
+	call		__head_fr401_set_protection
+	bra		__head_done_memmap
+
+__head_fr451_memmap:
+	LEDS		0x3301
+	call		__head_fr401_set_busctl
+	LEDS		0x3303
+	call		__head_fr401_survey_sdram
+	LEDS		0x3305
+	call		__head_fr451_set_protection
+	bra		__head_done_memmap
+
+__head_fr555_memmap:
+	LEDS		0x3501
+	call		__head_fr555_set_busctl
+	LEDS		0x3503
+	call		__head_fr555_survey_sdram
+	LEDS		0x3505
+	call		__head_fr555_set_protection
+
+__head_done_memmap:
+#endif
+	LEDS		0x0007
+
+###############################################################################
+#
+# turn the data cache and MMU on
+# - for the FR451 this'll mean that the window through which the kernel is
+#   viewed will change
+#
+###############################################################################
+
+#ifdef CONFIG_MMU
+#define MMUMODE		HSR0_EIMMU|HSR0_EDMMU|HSR0_EXMMU|HSR0_EDAT|HSR0_XEDAT
+#else
+#define MMUMODE		HSR0_EIMMU|HSR0_EDMMU
+#endif
+
+	movsg		hsr0,gr5
+
+	sethi.p		%hi(MMUMODE),gr4
+	setlo		%lo(MMUMODE),gr4
+	or		gr4,gr5,gr5
+
+#if defined(CONFIG_FRV_DEFL_CACHE_WTHRU)
+	sethi.p		%hi(HSR0_DCE|HSR0_CBM_WRITE_THRU),gr4
+	setlo		%lo(HSR0_DCE|HSR0_CBM_WRITE_THRU),gr4
+#elif defined(CONFIG_FRV_DEFL_CACHE_WBACK)
+	sethi.p		%hi(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4
+	setlo		%lo(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4
+#elif defined(CONFIG_FRV_DEFL_CACHE_WBEHIND)
+	sethi.p		%hi(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4
+	setlo		%lo(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4
+
+	movsg		psr,gr6
+	srli		gr6,#24,gr6
+	cmpi		gr6,#0x50,icc0		// FR451
+	beq		icc0,#0,0f
+	cmpi		gr6,#0x40,icc0		// FR405
+	bne		icc0,#0,1f
+0:
+	# turn off write-allocate
+	sethi.p		%hi(HSR0_NWA),gr6
+	setlo		%lo(HSR0_NWA),gr6
+	or		gr4,gr6,gr4
+1:
+
+#else
+#error No default cache configuration set
+#endif
+
+	or		gr4,gr5,gr5
+	movgs		gr5,hsr0
+	bar
+
+	LEDS		0x0008
+
+	sethi.p		%hi(__head_mmu_enabled),gr19
+	setlo		%lo(__head_mmu_enabled),gr19
+	jmpl		@(gr19,gr0)
+
+__head_mmu_enabled:
+	icei		@(gr0,gr0),#1
+	dcei		@(gr0,gr0),#1
+
+	LEDS		0x0009
+
+#ifdef CONFIG_MMU
+	call		__head_fr451_finalise_protection
+#endif
+
+	LEDS		0x000a
+
+###############################################################################
+#
+# set up the runtime environment
+#
+###############################################################################
+
+	# clear the BSS area
+	sethi.p		%hi(__bss_start),gr4
+	setlo		%lo(__bss_start),gr4
+	sethi.p		%hi(_end),gr5
+	setlo		%lo(_end),gr5
+	or.p		gr0,gr0,gr18
+	or		gr0,gr0,gr19
+
+0:
+	stdi		gr18,@(gr4,#0)
+	stdi		gr18,@(gr4,#8)
+	stdi		gr18,@(gr4,#16)
+	stdi.p		gr18,@(gr4,#24)
+	addi		gr4,#24,gr4
+	subcc		gr5,gr4,gr0,icc0
+	bhi		icc0,#2,0b
+
+	LEDS		0x000b
+
+	# save the SDRAM details
+	sethi.p		%hi(__sdram_old_base),gr4
+	setlo		%lo(__sdram_old_base),gr4
+	st		gr24,@(gr4,gr0)
+
+	sethi.p		%hi(__sdram_base),gr5
+	setlo		%lo(__sdram_base),gr5
+	sethi.p		%hi(memory_start),gr4
+	setlo		%lo(memory_start),gr4
+	st		gr5,@(gr4,gr0)
+
+	add		gr25,gr5,gr25
+	sethi.p		%hi(memory_end),gr4
+	setlo		%lo(memory_end),gr4
+	st		gr25,@(gr4,gr0)
+
+	# point the TBR at the kernel trap table
+	sethi.p		%hi(__entry_kerneltrap_table),gr4
+	setlo		%lo(__entry_kerneltrap_table),gr4
+	movgs		gr4,tbr
+
+	# set up the exception frame for init
+	sethi.p		%hi(__kernel_frame0_ptr),gr28
+	setlo		%lo(__kernel_frame0_ptr),gr28
+	sethi.p		%hi(_gp),gr16
+	setlo		%lo(_gp),gr16
+	sethi.p		%hi(__entry_usertrap_table),gr4
+	setlo		%lo(__entry_usertrap_table),gr4
+
+	lddi		@(gr28,#0),gr28		; load __frame & current
+	ldi.p		@(gr29,#4),gr15		; set current_thread
+
+	or		gr0,gr0,fp
+	or		gr28,gr0,sp
+
+	sti.p		gr4,@(gr28,REG_TBR)
+	setlos		#ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5
+	movgs		gr5,isr
+
+	# turn on and off various CPU services
+	movsg		psr,gr22
+	sethi.p		%hi(#PSR_EM|PSR_EF|PSR_CM|PSR_NEM),gr4
+	setlo		%lo(#PSR_EM|PSR_EF|PSR_CM|PSR_NEM),gr4
+	or		gr22,gr4,gr22
+	movgs		gr22,psr
+
+	andi		gr22,#~(PSR_PIL|PSR_PS|PSR_S),gr22
+	ori		gr22,#PSR_ET,gr22
+	sti		gr22,@(gr28,REG_PSR)
+
+
+###############################################################################
+#
+# set up the registers and jump into the kernel
+#
+###############################################################################
+
+	LEDS		0x000c
+
+	# initialise the processor and the peripherals
+	#call		SYMBOL_NAME(processor_init)
+	#call		SYMBOL_NAME(unit_init)
+	#LEDS		0x0aff
+
+	sethi.p		#0xe5e5,gr3
+	setlo		#0xe5e5,gr3
+	or.p		gr3,gr0,gr4
+	or		gr3,gr0,gr5
+	or.p		gr3,gr0,gr6
+	or		gr3,gr0,gr7
+	or.p		gr3,gr0,gr8
+	or		gr3,gr0,gr9
+	or.p		gr3,gr0,gr10
+	or		gr3,gr0,gr11
+	or.p		gr3,gr0,gr12
+	or		gr3,gr0,gr13
+	or.p		gr3,gr0,gr14
+	or		gr3,gr0,gr17
+	or.p		gr3,gr0,gr18
+	or		gr3,gr0,gr19
+	or.p		gr3,gr0,gr20
+	or		gr3,gr0,gr21
+	or.p		gr3,gr0,gr23
+	or		gr3,gr0,gr24
+	or.p		gr3,gr0,gr25
+	or		gr3,gr0,gr26
+	or.p		gr3,gr0,gr27
+#	or		gr3,gr0,gr30
+	or		gr3,gr0,gr31
+	movgs		gr0,lr
+	movgs		gr0,lcr
+	movgs		gr0,ccr
+	movgs		gr0,cccr
+
+	# initialise the virtual interrupt handling
+	subcc		gr0,gr0,gr0,icc2		/* set Z, clear C */
+
+#ifdef CONFIG_MMU
+	movgs		gr3,scr2
+	movgs		gr3,scr3
+#endif
+
+	LEDS		0x0fff
+
+	# invoke the debugging stub if present
+	# - arch/frv/kernel/debug-stub.c will shift control directly to init/main.c
+	#   (it will not return here)
+	break
+	.globl		__debug_stub_init_break
+__debug_stub_init_break:
+
+	# however, if you need to use an ICE, and don't care about using any userspace
+	# debugging tools (such as the ptrace syscall), you can just step over the break
+	# above and get to the kernel this way
+	# look at arch/frv/kernel/debug-stub.c: debug_stub_init() to see what you've missed
+	call		start_kernel
+
+	.globl		__head_end
+__head_end:
+	.size		_boot, .-_boot
+
+	# provide a point for GDB to place a break
+	.section	.text..start,"ax"
+	.globl		_start
+	.balign		4
+_start:
+	call		_boot
+
+	.previous
+###############################################################################
+#
+# split a tile off of the region defined by GR8-GR9
+#
+#	ENTRY:			EXIT:
+# GR4	-			IAMPR value representing tile
+# GR5	-			DAMPR value representing tile
+# GR6	-			IAMLR value representing tile
+# GR7	-			DAMLR value representing tile
+# GR8	region base pointer	[saved]
+# GR9	region top pointer	updated to exclude new tile
+# GR11	xAMLR mask		[saved]
+# GR25	SDRAM size		[saved]
+# GR30	LED address		[saved]
+#
+# - GR8 and GR9 should be rounded up/down to the nearest megabyte before calling
+#
+###############################################################################
+	.globl		__head_split_region
+	.type		__head_split_region,@function
+__head_split_region:
+	subcc.p		gr9,gr8,gr4,icc0
+	setlos		#31,gr5
+	scan.p		gr4,gr0,gr6
+	beq		icc0,#0,__head_region_empty
+	sub.p		gr5,gr6,gr6			; bit number of highest set bit (1MB=>20)
+	setlos		#1,gr4
+	sll.p		gr4,gr6,gr4			; size of region (1 << bitno)
+	subi		gr6,#17,gr6			; 1MB => 0x03
+	slli.p		gr6,#4,gr6			; 1MB => 0x30
+	sub		gr9,gr4,gr9			; move uncovered top down
+
+	or		gr9,gr6,gr4
+	ori		gr4,#xAMPRx_S_USER|xAMPRx_C_CACHED|xAMPRx_V,gr4
+	or.p		gr4,gr0,gr5
+
+	and		gr4,gr11,gr6
+	and.p		gr5,gr11,gr7
+	bralr
+
+__head_region_empty:
+	or.p		gr0,gr0,gr4
+	or		gr0,gr0,gr5
+	or.p		gr0,gr0,gr6
+	or		gr0,gr0,gr7
+	bralr
+	.size		__head_split_region, .-__head_split_region
+
+###############################################################################
+#
+# write the 32-bit hex number in GR8 to ttyS0
+#
+###############################################################################
+#if 0
+	.globl		__head_write_to_ttyS0
+	.type		__head_write_to_ttyS0,@function
+__head_write_to_ttyS0:
+	sethi.p		%hi(0xfeff9c00),gr31
+	setlo		%lo(0xfeff9c00),gr31
+	setlos		#8,gr20
+
+0:	ldubi		@(gr31,#5*8),gr21
+	andi		gr21,#0x60,gr21
+	subicc		gr21,#0x60,gr21,icc0
+	bne		icc0,#0,0b
+
+1:	srli		gr8,#28,gr21
+	slli		gr8,#4,gr8
+
+	addi		gr21,#'0',gr21
+	subicc		gr21,#'9',gr0,icc0
+	bls		icc0,#2,2f
+	addi		gr21,#'A'-'0'-10,gr21
+2:
+	stbi		gr21,@(gr31,#0*8)
+	subicc		gr20,#1,gr20,icc0
+	bhi		icc0,#2,1b
+
+	setlos		#'\r',gr21
+	stbi		gr21,@(gr31,#0*8)
+
+	setlos		#'\n',gr21
+	stbi		gr21,@(gr31,#0*8)
+
+3:	ldubi		@(gr31,#5*8),gr21
+	andi		gr21,#0x60,gr21
+	subicc		gr21,#0x60,gr21,icc0
+	bne		icc0,#0,3b
+	bralr
+
+	.size		__head_write_to_ttyS0, .-__head_write_to_ttyS0
+#endif
diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc
new file mode 100644
index 00000000..bff66628
--- /dev/null
+++ b/arch/frv/kernel/head.inc
@@ -0,0 +1,50 @@
+/* head.inc: head common definitions -*- asm -*-
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#if defined(CONFIG_MB93090_MB00)
+#define LED_ADDR (0x21200000+4)
+
+.macro LEDS val
+	sethi.p		%hi(0xFFC00030),gr3
+	setlo		%lo(0xFFC00030),gr3
+	lduh		@(gr3,gr0),gr3
+	andicc		gr3,#0x100,gr0,icc0
+	bne		icc0,0,999f
+
+	setlos		#~\val,gr3
+	st		gr3,@(gr30,gr0)
+	membar
+	dcf		@(gr30,gr0)
+    999:
+.endm
+
+#elif defined(CONFIG_MB93093_PDK)
+#define LED_ADDR (0x20000023)
+
+.macro LEDS val
+	setlos		#\val,gr3
+	stb		gr3,@(gr30,gr0)
+	membar
+.endm
+
+#else
+#define LED_ADDR 0
+
+.macro LEDS val
+.endm
+#endif
+
+#ifdef CONFIG_MMU
+__sdram_base = 0x00000000		/* base address to which SDRAM relocated */
+#else
+__sdram_base = __page_offset		/* base address to which SDRAM relocated */
+#endif
diff --git a/arch/frv/kernel/init_task.c b/arch/frv/kernel/init_task.c
new file mode 100644
index 00000000..3c3e0b33
--- /dev/null
+++ b/arch/frv/kernel/init_task.c
@@ -0,0 +1,32 @@
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
diff --git a/arch/frv/kernel/irq-mb93091.c b/arch/frv/kernel/irq-mb93091.c
new file mode 100644
index 00000000..2cc327a1
--- /dev/null
+++ b/arch/frv/kernel/irq-mb93091.c
@@ -0,0 +1,157 @@
+/* irq-mb93091.c: MB93091 FPGA interrupt handling
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/irc-regs.h>
+
+#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
+
+#define __get_IMR()	({ __reg16(0xffc00004); })
+#define __set_IMR(M)	do { __reg16(0xffc00004) = (M); wmb(); } while(0)
+#define __get_IFR()	({ __reg16(0xffc0000c); })
+#define __clr_IFR(M)	do { __reg16(0xffc0000c) = ~(M); wmb(); } while(0)
+
+
+/*
+ * on-motherboard FPGA PIC operations
+ */
+static void frv_fpga_mask(struct irq_data *d)
+{
+	uint16_t imr = __get_IMR();
+
+	imr |= 1 << (d->irq - IRQ_BASE_FPGA);
+
+	__set_IMR(imr);
+}
+
+static void frv_fpga_ack(struct irq_data *d)
+{
+	__clr_IFR(1 << (d->irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_mask_ack(struct irq_data *d)
+{
+	uint16_t imr = __get_IMR();
+
+	imr |= 1 << (d->irq - IRQ_BASE_FPGA);
+	__set_IMR(imr);
+
+	__clr_IFR(1 << (d->irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_unmask(struct irq_data *d)
+{
+	uint16_t imr = __get_IMR();
+
+	imr &= ~(1 << (d->irq - IRQ_BASE_FPGA));
+
+	__set_IMR(imr);
+}
+
+static struct irq_chip frv_fpga_pic = {
+	.name		= "mb93091",
+	.irq_ack	= frv_fpga_ack,
+	.irq_mask	= frv_fpga_mask,
+	.irq_mask_ack	= frv_fpga_mask_ack,
+	.irq_unmask	= frv_fpga_unmask,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask)
+{
+	uint16_t imr, mask = (unsigned long) _mask;
+
+	imr = __get_IMR();
+	mask = mask & ~imr & __get_IFR();
+
+	/* poll all the triggered IRQs */
+	while (mask) {
+		int irq;
+
+		asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+		irq = 31 - irq;
+		mask &= ~(1 << irq);
+
+		generic_handle_irq(IRQ_BASE_FPGA + irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[4]  = {
+	[0] = {
+		.handler	= fpga_interrupt,
+		.flags		= IRQF_DISABLED | IRQF_SHARED,
+		.name		= "fpga.0",
+		.dev_id		= (void *) 0x0028UL,
+	},
+	[1] = {
+		.handler	= fpga_interrupt,
+		.flags		= IRQF_DISABLED | IRQF_SHARED,
+		.name		= "fpga.1",
+		.dev_id		= (void *) 0x0050UL,
+	},
+	[2] = {
+		.handler	= fpga_interrupt,
+		.flags		= IRQF_DISABLED | IRQF_SHARED,
+		.name		= "fpga.2",
+		.dev_id		= (void *) 0x1c00UL,
+	},
+	[3] = {
+		.handler	= fpga_interrupt,
+		.flags		= IRQF_DISABLED | IRQF_SHARED,
+		.name		= "fpga.3",
+		.dev_id		= (void *) 0x6386UL,
+	}
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
+void __init fpga_init(void)
+{
+	int irq;
+
+	/* all PIC inputs are all set to be low-level driven, apart from the
+	 * NMI button (15) which is fixed at falling-edge
+	 */
+	__set_IMR(0x7ffe);
+	__clr_IFR(0x0000);
+
+	for (irq = IRQ_BASE_FPGA + 1; irq <= IRQ_BASE_FPGA + 14; irq++)
+		irq_set_chip_and_handler(irq, &frv_fpga_pic, handle_level_irq);
+
+	irq_set_chip_and_handler(IRQ_FPGA_NMI, &frv_fpga_pic, handle_edge_irq);
+
+	/* the FPGA drives the first four external IRQ inputs on the CPU PIC */
+	setup_irq(IRQ_CPU_EXTERNAL0, &fpga_irq[0]);
+	setup_irq(IRQ_CPU_EXTERNAL1, &fpga_irq[1]);
+	setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[2]);
+	setup_irq(IRQ_CPU_EXTERNAL3, &fpga_irq[3]);
+}
diff --git a/arch/frv/kernel/irq-mb93093.c b/arch/frv/kernel/irq-mb93093.c
new file mode 100644
index 00000000..95e4eb4f
--- /dev/null
+++ b/arch/frv/kernel/irq-mb93093.c
@@ -0,0 +1,130 @@
+/* irq-mb93093.c: MB93093 FPGA interrupt handling
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/irc-regs.h>
+
+#define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR)))
+
+#define __get_IMR()	({ __reg16(0x0a); })
+#define __set_IMR(M)	do { __reg16(0x0a) = (M);  wmb(); } while(0)
+#define __get_IFR()	({ __reg16(0x02); })
+#define __clr_IFR(M)	do { __reg16(0x02) = ~(M); wmb(); } while(0)
+
+/*
+ * off-CPU FPGA PIC operations
+ */
+static void frv_fpga_mask(struct irq_data *d)
+{
+	uint16_t imr = __get_IMR();
+
+	imr |= 1 << (d->irq - IRQ_BASE_FPGA);
+	__set_IMR(imr);
+}
+
+static void frv_fpga_ack(struct irq_data *d)
+{
+	__clr_IFR(1 << (d->irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_mask_ack(struct irq_data *d)
+{
+	uint16_t imr = __get_IMR();
+
+	imr |= 1 << (d->irq - IRQ_BASE_FPGA);
+	__set_IMR(imr);
+
+	__clr_IFR(1 << (d->irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_unmask(struct irq_data *d)
+{
+	uint16_t imr = __get_IMR();
+
+	imr &= ~(1 << (d->irq - IRQ_BASE_FPGA));
+
+	__set_IMR(imr);
+}
+
+static struct irq_chip frv_fpga_pic = {
+	.name		= "mb93093",
+	.irq_ack	= frv_fpga_ack,
+	.irq_mask	= frv_fpga_mask,
+	.irq_mask_ack	= frv_fpga_mask_ack,
+	.irq_unmask	= frv_fpga_unmask,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask)
+{
+	uint16_t imr, mask = (unsigned long) _mask;
+
+	imr = __get_IMR();
+	mask = mask & ~imr & __get_IFR();
+
+	/* poll all the triggered IRQs */
+	while (mask) {
+		int irq;
+
+		asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+		irq = 31 - irq;
+		mask &= ~(1 << irq);
+
+		generic_handle_irq(IRQ_BASE_FPGA + irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[1]  = {
+	[0] = {
+		.handler	= fpga_interrupt,
+		.flags		= IRQF_DISABLED,
+		.name		= "fpga.0",
+		.dev_id		= (void *) 0x0700UL,
+	}
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
+void __init fpga_init(void)
+{
+	int irq;
+
+	/* all PIC inputs are all set to be edge triggered */
+	__set_IMR(0x0700);
+	__clr_IFR(0x0000);
+
+	for (irq = IRQ_BASE_FPGA + 8; irq <= IRQ_BASE_FPGA + 10; irq++)
+		irq_set_chip_and_handler(irq, &frv_fpga_pic, handle_edge_irq);
+
+	/* the FPGA drives external IRQ input #2 on the CPU PIC */
+	setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[0]);
+}
diff --git a/arch/frv/kernel/irq-mb93493.c b/arch/frv/kernel/irq-mb93493.c
new file mode 100644
index 00000000..ba648da0
--- /dev/null
+++ b/arch/frv/kernel/irq-mb93493.c
@@ -0,0 +1,147 @@
+/* irq-mb93493.c: MB93493 companion chip interrupt handler
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/irc-regs.h>
+#include <asm/mb93493-irqs.h>
+#include <asm/mb93493-regs.h>
+
+#define IRQ_ROUTE_ONE(X) (X##_ROUTE << (X - IRQ_BASE_MB93493))
+
+#define IRQ_ROUTING					\
+	(IRQ_ROUTE_ONE(IRQ_MB93493_VDC)		|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_VCC)		|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_OUT)	|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_I2C_0)	|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_I2C_1)	|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_USB)		|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_LOCAL_BUS)	|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_PCMCIA)	|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_GPIO)	|	\
+	 IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_IN))
+
+/*
+ * daughter board PIC operations
+ * - there is no way to ACK interrupts in the MB93493 chip
+ */
+static void frv_mb93493_mask(struct irq_data *d)
+{
+	uint32_t iqsr;
+	volatile void *piqsr;
+
+	if (IRQ_ROUTING & (1 << (d->irq - IRQ_BASE_MB93493)))
+		piqsr = __addr_MB93493_IQSR(1);
+	else
+		piqsr = __addr_MB93493_IQSR(0);
+
+	iqsr = readl(piqsr);
+	iqsr &= ~(1 << (d->irq - IRQ_BASE_MB93493 + 16));
+	writel(iqsr, piqsr);
+}
+
+static void frv_mb93493_ack(struct irq_data *d)
+{
+}
+
+static void frv_mb93493_unmask(struct irq_data *d)
+{
+	uint32_t iqsr;
+	volatile void *piqsr;
+
+	if (IRQ_ROUTING & (1 << (d->irq - IRQ_BASE_MB93493)))
+		piqsr = __addr_MB93493_IQSR(1);
+	else
+		piqsr = __addr_MB93493_IQSR(0);
+
+	iqsr = readl(piqsr);
+	iqsr |= 1 << (d->irq - IRQ_BASE_MB93493 + 16);
+	writel(iqsr, piqsr);
+}
+
+static struct irq_chip frv_mb93493_pic = {
+	.name		= "mb93093",
+	.irq_ack	= frv_mb93493_ack,
+	.irq_mask	= frv_mb93493_mask,
+	.irq_mask_ack	= frv_mb93493_mask,
+	.irq_unmask	= frv_mb93493_unmask,
+};
+
+/*
+ * MB93493 PIC interrupt handler
+ */
+static irqreturn_t mb93493_interrupt(int irq, void *_piqsr)
+{
+	volatile void *piqsr = _piqsr;
+	uint32_t iqsr;
+
+	iqsr = readl(piqsr);
+	iqsr = iqsr & (iqsr >> 16) & 0xffff;
+
+	/* poll all the triggered IRQs */
+	while (iqsr) {
+		int irq;
+
+		asm("scan %1,gr0,%0" : "=r"(irq) : "r"(iqsr));
+		irq = 31 - irq;
+		iqsr &= ~(1 << irq);
+
+		generic_handle_irq(IRQ_BASE_MB93493 + irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * define an interrupt action for each MB93493 PIC output
+ * - use dev_id to indicate the MB93493 PIC input to output mappings
+ */
+static struct irqaction mb93493_irq[2]  = {
+	[0] = {
+		.handler	= mb93493_interrupt,
+		.flags		= IRQF_DISABLED | IRQF_SHARED,
+		.name		= "mb93493.0",
+		.dev_id		= (void *) __addr_MB93493_IQSR(0),
+	},
+	[1] = {
+		.handler	= mb93493_interrupt,
+		.flags		= IRQF_DISABLED | IRQF_SHARED,
+		.name		= "mb93493.1",
+		.dev_id		= (void *) __addr_MB93493_IQSR(1),
+	}
+};
+
+/*
+ * initialise the motherboard MB93493's PIC
+ */
+void __init mb93493_init(void)
+{
+	int irq;
+
+	for (irq = IRQ_BASE_MB93493 + 0; irq <= IRQ_BASE_MB93493 + 10; irq++)
+		irq_set_chip_and_handler(irq, &frv_mb93493_pic,
+					 handle_edge_irq);
+
+	/* the MB93493 drives external IRQ inputs on the CPU PIC */
+	setup_irq(IRQ_CPU_MB93493_0, &mb93493_irq[0]);
+	setup_irq(IRQ_CPU_MB93493_1, &mb93493_irq[1]);
+}
diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c
new file mode 100644
index 00000000..2239346f
--- /dev/null
+++ b/arch/frv/kernel/irq.c
@@ -0,0 +1,159 @@
+/* irq.c: FRV IRQ handling
+ *
+ * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+
+#include <linux/atomic.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/irc-regs.h>
+#include <asm/gdb-stub.h>
+
+#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
+
+extern void __init fpga_init(void);
+#ifdef CONFIG_FUJITSU_MB93493
+extern void __init mb93493_init(void);
+#endif
+
+#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
+
+atomic_t irq_err_count;
+
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	seq_printf(p, "%*s: ", prec, "ERR");
+	seq_printf(p, "%10u\n", atomic_read(&irq_err_count));
+	return 0;
+}
+
+/*
+ * on-CPU PIC operations
+ */
+static void frv_cpupic_ack(struct irq_data *d)
+{
+	__clr_RC(d->irq);
+	__clr_IRL();
+}
+
+static void frv_cpupic_mask(struct irq_data *d)
+{
+	__set_MASK(d->irq);
+}
+
+static void frv_cpupic_mask_ack(struct irq_data *d)
+{
+	__set_MASK(d->irq);
+	__clr_RC(d->irq);
+	__clr_IRL();
+}
+
+static void frv_cpupic_unmask(struct irq_data *d)
+{
+	__clr_MASK(d->irq);
+}
+
+static struct irq_chip frv_cpu_pic = {
+	.name		= "cpu",
+	.irq_ack	= frv_cpupic_ack,
+	.irq_mask	= frv_cpupic_mask,
+	.irq_mask_ack	= frv_cpupic_mask_ack,
+	.irq_unmask	= frv_cpupic_unmask,
+};
+
+/*
+ * handles all normal device IRQs
+ * - registers are referred to by the __frame variable (GR28)
+ * - IRQ distribution is complicated in this arch because of the many PICs, the
+ *   way they work and the way they cascade
+ */
+asmlinkage void do_IRQ(void)
+{
+	irq_enter();
+	generic_handle_irq(__get_IRL());
+	irq_exit();
+}
+
+/*
+ * handles all NMIs when not co-opted by the debugger
+ * - registers are referred to by the __frame variable (GR28)
+ */
+asmlinkage void do_NMI(void)
+{
+}
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+	int level;
+
+	for (level = 1; level <= 14; level++)
+		irq_set_chip_and_handler(level, &frv_cpu_pic,
+					 handle_level_irq);
+
+	irq_set_handler(IRQ_CPU_TIMER0, handle_edge_irq);
+
+	/* set the trigger levels for internal interrupt sources
+	 * - timers all falling-edge
+	 * - ERR0 is rising-edge
+	 * - all others are high-level
+	 */
+	__set_IITMR(0, 0x003f0000);	/* DMA0-3, TIMER0-2 */
+	__set_IITMR(1, 0x20000000);	/* ERR0-1, UART0-1, DMA4-7 */
+
+	/* route internal interrupts */
+	set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL,
+		IRQ_DMA0_LEVEL);
+	set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL);
+	set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL,
+		IRQ_UART1_LEVEL, IRQ_UART0_LEVEL);
+	set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL,
+		IRQ_DMA4_LEVEL);
+
+	/* route external interrupts */
+	set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL,
+		IRQ_XIRQ4_LEVEL);
+	set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL,
+		IRQ_XIRQ0_LEVEL);
+
+#if defined(CONFIG_MB93091_VDK)
+	__set_TM1(0x55550000);		/* XIRQ7-0 all active low */
+#elif defined(CONFIG_MB93093_PDK)
+	__set_TM1(0x15550000);		/* XIRQ7 active high, 6-0 all active low */
+#else
+#error dont know external IRQ trigger levels for this setup
+#endif
+
+	fpga_init();
+#ifdef CONFIG_FUJITSU_MB93493
+	mb93493_init();
+#endif
+}
diff --git a/arch/frv/kernel/kernel_execve.S b/arch/frv/kernel/kernel_execve.S
new file mode 100644
index 00000000..9b074a16
--- /dev/null
+++ b/arch/frv/kernel/kernel_execve.S
@@ -0,0 +1,33 @@
+/* in-kernel program execution
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+###############################################################################
+#
+# Do a system call from kernel instead of calling sys_execve so we end up with
+# proper pt_regs.
+#
+# int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+#
+# On entry: GR8/GR9/GR10: arguments to function
+# On return: GR8: syscall return.
+#
+###############################################################################
+	.globl		kernel_execve
+	.type		kernel_execve,@function
+kernel_execve:
+	setlos		__NR_execve,gr7
+	tira		gr0,#0
+	bralr
+
+	.size		kernel_execve,.-kernel_execve
diff --git a/arch/frv/kernel/kernel_thread.S b/arch/frv/kernel/kernel_thread.S
new file mode 100644
index 00000000..4531c830
--- /dev/null
+++ b/arch/frv/kernel/kernel_thread.S
@@ -0,0 +1,77 @@
+/* kernel_thread.S: kernel thread creation
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define	KERN_ERR	"<3>"
+
+	.section .rodata
+kernel_thread_emsg:
+	.asciz	KERN_ERR "failed to create kernel thread: error=%d\n"
+
+	.text
+	.balign		4
+
+###############################################################################
+#
+# Create a kernel thread
+#
+# int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+#
+###############################################################################
+	.globl		kernel_thread
+	.type		kernel_thread,@function
+kernel_thread:
+	or.p		gr8,gr0,gr4
+	or		gr9,gr0,gr5
+
+	# start by forking the current process, but with shared VM
+	setlos.p	#__NR_clone,gr7		; syscall number
+	ori		gr10,#CLONE_VM,gr8	; first syscall arg	[clone_flags]
+	sethi.p		#0xe4e4,gr9		; second syscall arg	[newsp]
+	setlo		#0xe4e4,gr9
+	setlos.p	#0,gr10			; third syscall arg	[parent_tidptr]
+	setlos		#0,gr11			; fourth syscall arg	[child_tidptr]
+	tira		gr0,#0
+	setlos.p	#4095,gr7
+	andcc		gr8,gr8,gr0,icc0
+	addcc.p		gr8,gr7,gr0,icc1
+	bnelr		icc0,#2
+	bc		icc1,#0,kernel_thread_error
+
+	# now invoke the work function
+	or		gr5,gr0,gr8
+	calll		@(gr4,gr0)
+
+	# and finally exit the thread
+	setlos		#__NR_exit,gr7		; syscall number
+	tira		gr0,#0
+
+kernel_thread_error:
+	subi		sp,#8,sp
+	movsg		lr,gr4
+	sti		gr8,@(sp,#0)
+	sti.p		gr4,@(sp,#4)
+
+	or		gr8,gr0,gr9
+	sethi.p		%hi(kernel_thread_emsg),gr8
+	setlo		%lo(kernel_thread_emsg),gr8
+
+	call		printk
+
+	ldi		@(sp,#4),gr4
+	ldi		@(sp,#0),gr8
+	subi		sp,#8,sp
+	jmpl		@(gr4,gr0)
+
+	.size		kernel_thread,.-kernel_thread
diff --git a/arch/frv/kernel/local.h b/arch/frv/kernel/local.h
new file mode 100644
index 00000000..76606d13
--- /dev/null
+++ b/arch/frv/kernel/local.h
@@ -0,0 +1,59 @@
+/* local.h: local definitions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _FRV_LOCAL_H
+#define _FRV_LOCAL_H
+
+#include <asm/sections.h>
+
+#ifndef __ASSEMBLY__
+
+/* dma.c */
+extern unsigned long frv_dma_inprogress;
+
+extern void frv_dma_pause_all(void);
+extern void frv_dma_resume_all(void);
+
+/* sleep.S */
+extern asmlinkage void frv_cpu_suspend(unsigned long);
+extern asmlinkage void frv_cpu_core_sleep(void);
+
+/* setup.c */
+extern unsigned long __nongprelbss pdm_suspend_mode;
+extern void determine_clocks(int verbose);
+extern int __nongprelbss clock_p0_current;
+extern int __nongprelbss clock_cm_current;
+extern int __nongprelbss clock_cmode_current;
+
+#ifdef CONFIG_PM
+extern int __nongprelbss clock_cmodes_permitted;
+extern unsigned long __nongprelbss clock_bits_settable;
+#define CLOCK_BIT_CM		0x0000000f
+#define CLOCK_BIT_CM_H		0x00000001	/* CLKC.CM can be set to 0 */
+#define CLOCK_BIT_CM_M		0x00000002	/* CLKC.CM can be set to 1 */
+#define CLOCK_BIT_CM_L		0x00000004	/* CLKC.CM can be set to 2 */
+#define CLOCK_BIT_P0		0x00000010	/* CLKC.P0 can be changed */
+#define CLOCK_BIT_CMODE		0x00000020	/* CLKC.CMODE can be changed */
+
+extern void (*__power_switch_wake_setup)(void);
+extern int  (*__power_switch_wake_check)(void);
+extern void (*__power_switch_wake_cleanup)(void);
+#endif
+
+/* time.c */
+extern void time_divisor_init(void);
+
+/* cmode.S */
+extern asmlinkage void frv_change_cmode(int);
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* _FRV_LOCAL_H */
diff --git a/arch/frv/kernel/local64.h b/arch/frv/kernel/local64.h
new file mode 100644
index 00000000..36c93b5c
--- /dev/null
+++ b/arch/frv/kernel/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/frv/kernel/module.c b/arch/frv/kernel/module.c
new file mode 100644
index 00000000..9d9835f1
--- /dev/null
+++ b/arch/frv/kernel/module.c
@@ -0,0 +1,27 @@
+/* module.c: FRV specific module loading bits
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/module.c, Copyright (C) 2001 Rusty Russell.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+/* TODO: At least one of apply_relocate or apply_relocate_add must be
+ * implemented in order to get working module support.
+ */
diff --git a/arch/frv/kernel/pm-mb93093.c b/arch/frv/kernel/pm-mb93093.c
new file mode 100644
index 00000000..eaa7b582
--- /dev/null
+++ b/arch/frv/kernel/pm-mb93093.c
@@ -0,0 +1,65 @@
+/*
+ * FR-V MB93093 Power Management Routines
+ *
+ * Copyright (c) 2004 Red Hat, Inc.
+ *
+ * Written by: msalter@redhat.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+
+#include <asm/mb86943a.h>
+
+#include "local.h"
+
+static unsigned long imask;
+/*
+ * Setup interrupt masks, etc to enable wakeup by power switch
+ */
+static void mb93093_power_switch_setup(void)
+{
+	/* mask all but FPGA interrupt sources. */
+	imask = *(volatile unsigned long *)0xfeff9820;
+	*(volatile unsigned long *)0xfeff9820 = ~(1 << (IRQ_XIRQ2_LEVEL + 16)) & 0xfffe0000;
+}
+
+/*
+ * Cleanup interrupt masks, etc after wakeup by power switch
+ */
+static void mb93093_power_switch_cleanup(void)
+{
+	*(volatile unsigned long *)0xfeff9820 = imask;
+}
+
+/*
+ * Return non-zero if wakeup irq was caused by power switch
+ */
+static int mb93093_power_switch_check(void)
+{
+	return 1;
+}
+
+/*
+ * Initialize power interface
+ */
+static int __init mb93093_pm_init(void)
+{
+	__power_switch_wake_setup = mb93093_power_switch_setup;
+	__power_switch_wake_check = mb93093_power_switch_check;
+	__power_switch_wake_cleanup = mb93093_power_switch_cleanup;
+	return 0;
+}
+
+__initcall(mb93093_pm_init);
+
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
new file mode 100644
index 00000000..5fa3889d
--- /dev/null
+++ b/arch/frv/kernel/pm.c
@@ -0,0 +1,353 @@
+/*
+ * FR-V Power Management Routines
+ *
+ * Copyright (c) 2004 Red Hat, Inc.
+ *
+ * Based on SA1100 version:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+
+#include <asm/mb86943a.h>
+
+#include "local.h"
+
+/*
+ * Debug macros
+ */
+#define DEBUG
+
+int pm_do_suspend(void)
+{
+	local_irq_disable();
+
+	__set_LEDS(0xb1);
+
+	/* go zzz */
+	frv_cpu_suspend(pdm_suspend_mode);
+
+	__set_LEDS(0xb2);
+
+	local_irq_enable();
+
+	return 0;
+}
+
+static unsigned long __irq_mask;
+
+/*
+ * Setup interrupt masks, etc to enable wakeup by power switch
+ */
+static void __default_power_switch_setup(void)
+{
+	/* default is to mask all interrupt sources. */
+	__irq_mask = *(unsigned long *)0xfeff9820;
+	*(unsigned long *)0xfeff9820 = 0xfffe0000;
+}
+
+/*
+ * Cleanup interrupt masks, etc after wakeup by power switch
+ */
+static void __default_power_switch_cleanup(void)
+{
+	*(unsigned long *)0xfeff9820 = __irq_mask;
+}
+
+/*
+ * Return non-zero if wakeup irq was caused by power switch
+ */
+static int __default_power_switch_check(void)
+{
+	return 1;
+}
+
+void (*__power_switch_wake_setup)(void) = __default_power_switch_setup;
+int  (*__power_switch_wake_check)(void) = __default_power_switch_check;
+void (*__power_switch_wake_cleanup)(void) = __default_power_switch_cleanup;
+
+int pm_do_bus_sleep(void)
+{
+	local_irq_disable();
+
+	/*
+         * Here is where we need some platform-dependent setup
+	 * of the interrupt state so that appropriate wakeup
+	 * sources are allowed and all others are masked.
+	 */
+	__power_switch_wake_setup();
+
+	__set_LEDS(0xa1);
+
+	/* go zzz
+	 *
+	 * This is in a loop in case power switch shares an irq with other
+	 * devices. The wake_check() tells us if we need to finish waking
+	 * or go back to sleep.
+	 */
+	do {
+		frv_cpu_suspend(HSR0_PDM_BUS_SLEEP);
+	} while (__power_switch_wake_check && !__power_switch_wake_check());
+
+	__set_LEDS(0xa2);
+
+	/*
+         * Here is where we need some platform-dependent restore
+	 * of the interrupt state prior to being called.
+	 */
+	__power_switch_wake_cleanup();
+
+	local_irq_enable();
+
+	return 0;
+}
+
+unsigned long sleep_phys_sp(void *sp)
+{
+	return virt_to_phys(sp);
+}
+
+#ifdef CONFIG_SYSCTL
+/*
+ * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6
+ * when all the PM interfaces exist nicely.
+ */
+#define CTL_PM_SUSPEND 1
+#define CTL_PM_CMODE 2
+#define CTL_PM_P0 4
+#define CTL_PM_CM 5
+
+static int user_atoi(char __user *ubuf, size_t len)
+{
+	char buf[16];
+	unsigned long ret;
+
+	if (len > 15)
+		return -EINVAL;
+
+	if (copy_from_user(buf, ubuf, len))
+		return -EFAULT;
+
+	buf[len] = 0;
+	ret = simple_strtoul(buf, NULL, 0);
+	if (ret > INT_MAX)
+		return -ERANGE;
+	return ret;
+}
+
+/*
+ * Send us to sleep.
+ */
+static int sysctl_pm_do_suspend(ctl_table *ctl, int write,
+				void __user *buffer, size_t *lenp, loff_t *fpos)
+{
+	int retval, mode;
+
+	if (*lenp <= 0)
+		return -EIO;
+
+	mode = user_atoi(buffer, *lenp);
+	if ((mode != 1) && (mode != 5))
+		return -EINVAL;
+
+	if (retval == 0) {
+		if (mode == 5)
+		    retval = pm_do_bus_sleep();
+		else
+		    retval = pm_do_suspend();
+	}
+
+	return retval;
+}
+
+static int try_set_cmode(int new_cmode)
+{
+	if (new_cmode > 15)
+		return -EINVAL;
+	if (!(clock_cmodes_permitted & (1<<new_cmode)))
+		return -EINVAL;
+
+	/* now change cmode */
+	local_irq_disable();
+	frv_dma_pause_all();
+
+	frv_change_cmode(new_cmode);
+
+	determine_clocks(0);
+	time_divisor_init();
+
+#ifdef DEBUG
+	determine_clocks(1);
+#endif
+	frv_dma_resume_all();
+	local_irq_enable();
+
+	return 0;
+}
+
+
+static int cmode_procctl(ctl_table *ctl, int write,
+			 void __user *buffer, size_t *lenp, loff_t *fpos)
+{
+	int new_cmode;
+
+	if (!write)
+		return proc_dointvec(ctl, write, buffer, lenp, fpos);
+
+	new_cmode = user_atoi(buffer, *lenp);
+
+	return try_set_cmode(new_cmode)?:*lenp;
+}
+
+static int try_set_p0(int new_p0)
+{
+	unsigned long flags, clkc;
+
+	if (new_p0 < 0 || new_p0 > 1)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	__set_PSR(flags & ~PSR_ET);
+
+	frv_dma_pause_all();
+
+	clkc = __get_CLKC();
+	if (new_p0)
+		clkc |= CLKC_P0;
+	else
+		clkc &= ~CLKC_P0;
+	__set_CLKC(clkc);
+
+	determine_clocks(0);
+	time_divisor_init();
+
+#ifdef DEBUG
+	determine_clocks(1);
+#endif
+	frv_dma_resume_all();
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int try_set_cm(int new_cm)
+{
+	unsigned long flags, clkc;
+
+	if (new_cm < 0 || new_cm > 1)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	__set_PSR(flags & ~PSR_ET);
+
+	frv_dma_pause_all();
+
+	clkc = __get_CLKC();
+	clkc &= ~CLKC_CM;
+	clkc |= new_cm;
+	__set_CLKC(clkc);
+
+	determine_clocks(0);
+	time_divisor_init();
+
+#if 1 //def DEBUG
+	determine_clocks(1);
+#endif
+
+	frv_dma_resume_all();
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int p0_procctl(ctl_table *ctl, int write,
+		      void __user *buffer, size_t *lenp, loff_t *fpos)
+{
+	int new_p0;
+
+	if (!write)
+		return proc_dointvec(ctl, write, buffer, lenp, fpos);
+
+	new_p0 = user_atoi(buffer, *lenp);
+
+	return try_set_p0(new_p0)?:*lenp;
+}
+
+static int cm_procctl(ctl_table *ctl, int write,
+		      void __user *buffer, size_t *lenp, loff_t *fpos)
+{
+	int new_cm;
+
+	if (!write)
+		return proc_dointvec(ctl, write, buffer, lenp, fpos);
+
+	new_cm = user_atoi(buffer, *lenp);
+
+	return try_set_cm(new_cm)?:*lenp;
+}
+
+static struct ctl_table pm_table[] =
+{
+	{
+		.procname	= "suspend",
+		.data		= NULL,
+		.maxlen		= 0,
+		.mode		= 0200,
+		.proc_handler	= sysctl_pm_do_suspend,
+	},
+	{
+		.procname	= "cmode",
+		.data		= &clock_cmode_current,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= cmode_procctl,
+	},
+	{
+		.procname	= "p0",
+		.data		= &clock_p0_current,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= p0_procctl,
+	},
+	{
+		.procname	= "cm",
+		.data		= &clock_cm_current,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= cm_procctl,
+	},
+	{ }
+};
+
+static struct ctl_table pm_dir_table[] =
+{
+	{
+		.procname	= "pm",
+		.mode		= 0555,
+		.child		= pm_table,
+	},
+	{ }
+};
+
+/*
+ * Initialize power interface
+ */
+static int __init pm_init(void)
+{
+	register_sysctl_table(pm_dir_table);
+	return 0;
+}
+
+__initcall(pm_init);
+
+#endif
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
new file mode 100644
index 00000000..d4de48bd
--- /dev/null
+++ b/arch/frv/kernel/process.c
@@ -0,0 +1,375 @@
+/* process.c: FRV specific parts of process handling
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/process.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/elf.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/pagemap.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/uaccess.h>
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+#include <asm/tlb.h>
+#include <asm/gdb-stub.h>
+#include <asm/mb-regs.h>
+
+#include "local.h"
+
+asmlinkage void ret_from_fork(void);
+
+#include <asm/pgalloc.h>
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+struct task_struct *alloc_task_struct_node(int node)
+{
+	struct task_struct *p = kmalloc_node(THREAD_SIZE, GFP_KERNEL, node);
+
+	if (p)
+		atomic_set((atomic_t *)(p+1), 1);
+	return p;
+}
+
+void free_task_struct(struct task_struct *p)
+{
+	if (atomic_dec_and_test((atomic_t *)(p+1)))
+		kfree(p);
+}
+
+static void core_sleep_idle(void)
+{
+#ifdef LED_DEBUG_SLEEP
+	/* Show that we're sleeping... */
+	__set_LEDS(0x55aa);
+#endif
+	frv_cpu_core_sleep();
+#ifdef LED_DEBUG_SLEEP
+	/* ... and that we woke up */
+	__set_LEDS(0);
+#endif
+	mb();
+}
+
+void (*idle)(void) = core_sleep_idle;
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched()) {
+			check_pgt_cache();
+
+			if (!frv_dma_inprogress && idle)
+				idle();
+		}
+
+		schedule_preempt_disabled();
+	}
+}
+
+void machine_restart(char * __unused)
+{
+	unsigned long reset_addr;
+#ifdef CONFIG_GDBSTUB
+	gdbstub_exit(0);
+#endif
+
+	if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551)
+		reset_addr = 0xfefff500;
+	else
+		reset_addr = 0xfeff0500;
+
+	/* Software reset. */
+	asm volatile("      dcef @(gr0,gr0),1 ! membar !"
+		     "      sti     %1,@(%0,0) !"
+		     "      nop ! nop ! nop ! nop ! nop ! "
+		     "      nop ! nop ! nop ! nop ! nop ! "
+		     "      nop ! nop ! nop ! nop ! nop ! "
+		     "      nop ! nop ! nop ! nop ! nop ! "
+		     : : "r" (reset_addr), "r" (1) );
+
+	for (;;)
+		;
+}
+
+void machine_halt(void)
+{
+#ifdef CONFIG_GDBSTUB
+	gdbstub_exit(0);
+#endif
+
+	for (;;);
+}
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_GDBSTUB
+	gdbstub_exit(0);
+#endif
+
+	for (;;);
+}
+
+void flush_thread(void)
+{
+	/* nothing */
+}
+
+inline unsigned long user_stack(const struct pt_regs *regs)
+{
+	while (regs->next_frame)
+		regs = regs->next_frame;
+	return user_mode(regs) ? regs->sp : 0;
+}
+
+asmlinkage int sys_fork(void)
+{
+#ifndef CONFIG_MMU
+	/* fork almost works, enough to trick you into looking elsewhere:-( */
+	return -EINVAL;
+#else
+	return do_fork(SIGCHLD, user_stack(__frame), __frame, 0, NULL, NULL);
+#endif
+}
+
+asmlinkage int sys_vfork(void)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, user_stack(__frame), __frame, 0,
+		       NULL, NULL);
+}
+
+/*****************************************************************************/
+/*
+ * clone a process
+ * - tlsptr is retrieved by copy_thread()
+ */
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			 int __user *parent_tidptr, int __user *child_tidptr,
+			 int __user *tlsptr)
+{
+	if (!newsp)
+		newsp = user_stack(__frame);
+	return do_fork(clone_flags, newsp, __frame, 0, parent_tidptr, child_tidptr);
+} /* end sys_clone() */
+
+/*****************************************************************************/
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+	//unlazy_fpu(tsk);
+} /* end prepare_to_copy() */
+
+/*****************************************************************************/
+/*
+ * set up the kernel stack and exception frames for a new process
+ */
+int copy_thread(unsigned long clone_flags,
+		unsigned long usp, unsigned long topstk,
+		struct task_struct *p, struct pt_regs *regs)
+{
+	struct pt_regs *childregs0, *childregs, *regs0;
+
+	regs0 = __kernel_frame0_ptr;
+	childregs0 = (struct pt_regs *)
+		(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
+	childregs = childregs0;
+
+	/* set up the userspace frame (the only place that the USP is stored) */
+	*childregs0 = *regs0;
+
+	childregs0->gr8		= 0;
+	childregs0->sp		= usp;
+	childregs0->next_frame	= NULL;
+
+	/* set up the return kernel frame if called from kernel_thread() */
+	if (regs != regs0) {
+		childregs--;
+		*childregs = *regs;
+		childregs->sp = (unsigned long) childregs0;
+		childregs->next_frame = childregs0;
+		childregs->gr15 = (unsigned long) task_thread_info(p);
+		childregs->gr29 = (unsigned long) p;
+	}
+
+	p->set_child_tid = p->clear_child_tid = NULL;
+
+	p->thread.frame	 = childregs;
+	p->thread.curr	 = p;
+	p->thread.sp	 = (unsigned long) childregs;
+	p->thread.fp	 = 0;
+	p->thread.lr	 = 0;
+	p->thread.pc	 = (unsigned long) ret_from_fork;
+	p->thread.frame0 = childregs0;
+
+	/* the new TLS pointer is passed in as arg #5 to sys_clone() */
+	if (clone_flags & CLONE_SETTLS)
+		childregs->gr29 = childregs->gr12;
+
+	save_user_regs(p->thread.user);
+
+	return 0;
+} /* end copy_thread() */
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(const char __user *name,
+			  const char __user *const __user *argv,
+			  const char __user *const __user *envp)
+{
+	int error;
+	char * filename;
+
+	filename = getname(name);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		return error;
+	error = do_execve(filename, argv, envp, __frame);
+	putname(filename);
+	return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	struct pt_regs *regs0;
+	unsigned long fp, pc;
+	unsigned long stack_limit;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	stack_limit = (unsigned long) (p + 1);
+	fp = p->thread.fp;
+	regs0 = p->thread.frame0;
+
+	do {
+		if (fp < stack_limit || fp >= (unsigned long) regs0 || fp & 3)
+			return 0;
+
+		pc = ((unsigned long *) fp)[2];
+
+		/* FIXME: This depends on the order of these functions. */
+		if (!in_sched_functions(pc))
+			return pc;
+
+		fp = *(unsigned long *) fp;
+	} while (count++ < 16);
+
+	return 0;
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	/* Check whether the thread is blocked in resume() */
+	if (in_sched_functions(tsk->thread.pc))
+		return ((unsigned long *)tsk->thread.fp)[2];
+	else
+		return tsk->thread.pc;
+}
+
+int elf_check_arch(const struct elf32_hdr *hdr)
+{
+	unsigned long hsr0 = __get_HSR(0);
+	unsigned long psr = __get_PSR();
+
+	if (hdr->e_machine != EM_FRV)
+		return 0;
+
+	switch (hdr->e_flags & EF_FRV_GPR_MASK) {
+	case EF_FRV_GPR64:
+		if ((hsr0 & HSR0_GRN) == HSR0_GRN_32)
+			return 0;
+	case EF_FRV_GPR32:
+	case 0:
+		break;
+	default:
+		return 0;
+	}
+
+	switch (hdr->e_flags & EF_FRV_FPR_MASK) {
+	case EF_FRV_FPR64:
+		if ((hsr0 & HSR0_FRN) == HSR0_FRN_32)
+			return 0;
+	case EF_FRV_FPR32:
+	case EF_FRV_FPR_NONE:
+	case 0:
+		break;
+	default:
+		return 0;
+	}
+
+	if ((hdr->e_flags & EF_FRV_MULADD) == EF_FRV_MULADD)
+		if (PSR_IMPLE(psr) != PSR_IMPLE_FR405 &&
+		    PSR_IMPLE(psr) != PSR_IMPLE_FR451)
+			return 0;
+
+	switch (hdr->e_flags & EF_FRV_CPU_MASK) {
+	case EF_FRV_CPU_GENERIC:
+		break;
+	case EF_FRV_CPU_FR300:
+	case EF_FRV_CPU_SIMPLE:
+	case EF_FRV_CPU_TOMCAT:
+	default:
+		return 0;
+	case EF_FRV_CPU_FR400:
+		if (PSR_IMPLE(psr) != PSR_IMPLE_FR401 &&
+		    PSR_IMPLE(psr) != PSR_IMPLE_FR405 &&
+		    PSR_IMPLE(psr) != PSR_IMPLE_FR451 &&
+		    PSR_IMPLE(psr) != PSR_IMPLE_FR551)
+			return 0;
+		break;
+	case EF_FRV_CPU_FR450:
+		if (PSR_IMPLE(psr) != PSR_IMPLE_FR451)
+			return 0;
+		break;
+	case EF_FRV_CPU_FR500:
+		if (PSR_IMPLE(psr) != PSR_IMPLE_FR501)
+			return 0;
+		break;
+	case EF_FRV_CPU_FR550:
+		if (PSR_IMPLE(psr) != PSR_IMPLE_FR551)
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+	memcpy(fpregs,
+	       &current->thread.user->f,
+	       sizeof(current->thread.user->f));
+	return 1;
+}
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
new file mode 100644
index 00000000..3987ff88
--- /dev/null
+++ b/arch/frv/kernel/ptrace.c
@@ -0,0 +1,377 @@
+/* ptrace.c: FRV specific parts of process tracing
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/ptrace.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+#include <linux/tracehook.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/unistd.h>
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * retrieve the contents of FRV userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct user_int_regs *iregs = &target->thread.user->i;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  iregs, 0, sizeof(*iregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*iregs), -1);
+}
+
+/*
+ * update the contents of the FRV userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct user_int_regs *iregs = &target->thread.user->i;
+	unsigned int offs_gr0, offs_gr1;
+	int ret;
+
+	/* not allowed to set PSR or __status */
+	if (pos < offsetof(struct user_int_regs, psr) + sizeof(long) &&
+	    pos + count > offsetof(struct user_int_regs, psr))
+		return -EIO;
+
+	if (pos < offsetof(struct user_int_regs, __status) + sizeof(long) &&
+	    pos + count > offsetof(struct user_int_regs, __status))
+		return -EIO;
+
+	/* set the control regs */
+	offs_gr0 = offsetof(struct user_int_regs, gr[0]);
+	offs_gr1 = offsetof(struct user_int_regs, gr[1]);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 iregs, 0, offs_gr0);
+	if (ret < 0)
+		return ret;
+
+	/* skip GR0/TBR */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					offs_gr0, offs_gr1);
+	if (ret < 0)
+		return ret;
+
+	/* set the general regs */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &iregs->gr[1], offs_gr1, sizeof(*iregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					sizeof(*iregs), -1);
+}
+
+/*
+ * retrieve the contents of FRV userspace FP/Media registers
+ */
+static int fpmregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct user_fpmedia_regs *fpregs = &target->thread.user->f;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * update the contents of the FRV userspace FP/Media registers
+ */
+static int fpmregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct user_fpmedia_regs *fpregs = &target->thread.user->f;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * determine if the FP/Media registers have actually been used
+ */
+static int fpmregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	return tsk_used_math(target) ? regset->n : 0;
+}
+
+/*
+ * Define the register sets available on the FRV under Linux
+ */
+enum frv_regset {
+	REGSET_GENERAL,
+	REGSET_FPMEDIA,
+};
+
+static const struct user_regset frv_regsets[] = {
+	/*
+	 * General register format is:
+	 *	PSR, ISR, CCR, CCCR, LR, LCR, PC, (STATUS), SYSCALLNO, ORIG_G8
+	 *	GNER0-1, IACC0, TBR, GR1-63
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+	/*
+	 * FPU/Media register format is:
+	 *	FR0-63, FNER0-1, MSR0-1, ACC0-7, ACCG0-8, FSR
+	 */
+	[REGSET_FPMEDIA] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_fpmedia_regs) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpmregs_get,
+		.set		= fpmregs_set,
+		.active		= fpmregs_active,
+	},
+};
+
+static const struct user_regset_view user_frv_native_view = {
+	.name		= "frv",
+	.e_machine	= EM_FRV,
+	.regsets	= frv_regsets,
+	.n		= ARRAY_SIZE(frv_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_frv_native_view;
+}
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline long get_reg(struct task_struct *task, int regno)
+{
+	struct user_context *user = task->thread.user;
+
+	if (regno < 0 || regno >= PT__END)
+		return 0;
+
+	return ((unsigned long *) user)[regno];
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int put_reg(struct task_struct *task, int regno,
+			  unsigned long data)
+{
+	struct user_context *user = task->thread.user;
+
+	if (regno < 0 || regno >= PT__END)
+		return -EIO;
+
+	switch (regno) {
+	case PT_GR(0):
+		return 0;
+	case PT_PSR:
+	case PT__STATUS:
+		return -EIO;
+	default:
+		((unsigned long *) user)[regno] = data;
+		return 0;
+	}
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Control h/w single stepping
+ */
+void user_enable_single_step(struct task_struct *child)
+{
+	child->thread.frame0->__status |= REG__STATUS_STEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->thread.frame0->__status &= ~REG__STATUS_STEP;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	unsigned long tmp;
+	int ret;
+	int regno = addr >> 2;
+	unsigned long __user *datap = (unsigned long __user *) data;
+
+	switch (request) {
+		/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		tmp = 0;
+		ret = -EIO;
+		if (addr & 3)
+			break;
+
+		ret = 0;
+		switch (regno) {
+		case 0 ... PT__END - 1:
+			tmp = get_reg(child, regno);
+			break;
+
+		case PT__END + 0:
+			tmp = child->mm->end_code - child->mm->start_code;
+			break;
+
+		case PT__END + 1:
+			tmp = child->mm->end_data - child->mm->start_data;
+			break;
+
+		case PT__END + 2:
+			tmp = child->mm->start_stack - child->mm->start_brk;
+			break;
+
+		case PT__END + 3:
+			tmp = child->mm->start_code;
+			break;
+
+		case PT__END + 4:
+			tmp = child->mm->start_stack;
+			break;
+
+		default:
+			ret = -EIO;
+			break;
+		}
+
+		if (ret == 0)
+			ret = put_user(tmp, datap);
+		break;
+	}
+
+	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+		ret = -EIO;
+		if (addr & 3)
+			break;
+
+		switch (regno) {
+		case 0 ... PT__END - 1:
+			ret = put_reg(child, regno, data);
+			break;
+		}
+		break;
+
+	case PTRACE_GETREGS:	/* Get all integer regs from the child. */
+		return copy_regset_to_user(child, &user_frv_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(child->thread.user->i),
+					   datap);
+
+	case PTRACE_SETREGS:	/* Set all integer regs in the child. */
+		return copy_regset_from_user(child, &user_frv_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(child->thread.user->i),
+					     datap);
+
+	case PTRACE_GETFPREGS:	/* Get the child FP/Media state. */
+		return copy_regset_to_user(child, &user_frv_native_view,
+					   REGSET_FPMEDIA,
+					   0, sizeof(child->thread.user->f),
+					   datap);
+
+	case PTRACE_SETFPREGS:	/* Set the child FP/Media state. */
+		return copy_regset_from_user(child, &user_frv_native_view,
+					     REGSET_FPMEDIA,
+					     0, sizeof(child->thread.user->f),
+					     datap);
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+	return ret;
+}
+
+/*
+ * handle tracing of system call entry
+ * - return the revised system call number or ULONG_MAX to cause ENOSYS
+ */
+asmlinkage unsigned long syscall_trace_entry(void)
+{
+	__frame->__status |= REG__STATUS_SYSC_ENTRY;
+	if (tracehook_report_syscall_entry(__frame)) {
+		/* tracing decided this syscall should not happen, so
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in
+		 * __frame->syscallno
+		 */
+		return ULONG_MAX;
+	}
+
+	return __frame->syscallno;
+}
+
+/*
+ * handle tracing of system call exit
+ */
+asmlinkage void syscall_trace_exit(void)
+{
+	__frame->__status |= REG__STATUS_SYSC_EXIT;
+	tracehook_report_syscall_exit(__frame, 0);
+}
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
new file mode 100644
index 00000000..75cf7f4b
--- /dev/null
+++ b/arch/frv/kernel/setup.c
@@ -0,0 +1,1179 @@
+/* setup.c: FRV specific setup
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/setup.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <generated/utsrelease.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/genhd.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/major.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/pgalloc.h>
+#include <asm/busctl-regs.h>
+#include <asm/serial-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/irc-regs.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+#include <asm/mb93493-regs.h>
+#include <asm/gdb-stub.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <asm/pgtable.h>
+#endif
+
+#include "local.h"
+
+#ifdef CONFIG_MB93090_MB00
+static void __init mb93090_display(void);
+#endif
+#ifdef CONFIG_MMU
+static void __init setup_linux_memory(void);
+#else
+static void __init setup_uclinux_memory(void);
+#endif
+
+#ifdef CONFIG_MB93090_MB00
+static char __initdata mb93090_banner[] = "FJ/RH FR-V Linux";
+static char __initdata mb93090_version[] = UTS_RELEASE;
+
+int __nongprelbss mb93090_mb00_detected;
+#endif
+
+const char __frv_unknown_system[] = "unknown";
+const char __frv_mb93091_cb10[] = "mb93091-cb10";
+const char __frv_mb93091_cb11[] = "mb93091-cb11";
+const char __frv_mb93091_cb30[] = "mb93091-cb30";
+const char __frv_mb93091_cb41[] = "mb93091-cb41";
+const char __frv_mb93091_cb60[] = "mb93091-cb60";
+const char __frv_mb93091_cb70[] = "mb93091-cb70";
+const char __frv_mb93091_cb451[] = "mb93091-cb451";
+const char __frv_mb93090_mb00[] = "mb93090-mb00";
+
+const char __frv_mb93493[] = "mb93493";
+
+const char __frv_mb93093[] = "mb93093";
+
+static const char *__nongprelbss cpu_series;
+static const char *__nongprelbss cpu_core;
+static const char *__nongprelbss cpu_silicon;
+static const char *__nongprelbss cpu_mmu;
+static const char *__nongprelbss cpu_system;
+static const char *__nongprelbss cpu_board1;
+static const char *__nongprelbss cpu_board2;
+
+static unsigned long __nongprelbss cpu_psr_all;
+static unsigned long __nongprelbss cpu_hsr0_all;
+
+unsigned long __nongprelbss pdm_suspend_mode;
+
+unsigned long __nongprelbss rom_length;
+unsigned long __nongprelbss memory_start;
+unsigned long __nongprelbss memory_end;
+
+unsigned long __nongprelbss dma_coherent_mem_start;
+unsigned long __nongprelbss dma_coherent_mem_end;
+
+unsigned long __initdata __sdram_old_base;
+unsigned long __initdata num_mappedpages;
+
+struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+char __initdata redboot_command_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PM
+#define __pminit
+#define __pminitdata
+#else
+#define __pminit __init
+#define __pminitdata __initdata
+#endif
+
+struct clock_cmode {
+	uint8_t	xbus, sdram, corebus, core, dsu;
+};
+
+#define _frac(N,D) ((N)<<4 | (D))
+#define _x0_16	_frac(1,6)
+#define _x0_25	_frac(1,4)
+#define _x0_33	_frac(1,3)
+#define _x0_375	_frac(3,8)
+#define _x0_5	_frac(1,2)
+#define _x0_66	_frac(2,3)
+#define _x0_75	_frac(3,4)
+#define _x1	_frac(1,1)
+#define _x1_5	_frac(3,2)
+#define _x2	_frac(2,1)
+#define _x3	_frac(3,1)
+#define _x4	_frac(4,1)
+#define _x4_5	_frac(9,2)
+#define _x6	_frac(6,1)
+#define _x8	_frac(8,1)
+#define _x9	_frac(9,1)
+
+int __nongprelbss clock_p0_current;
+int __nongprelbss clock_cm_current;
+int __nongprelbss clock_cmode_current;
+#ifdef CONFIG_PM
+int __nongprelbss clock_cmodes_permitted;
+unsigned long __nongprelbss clock_bits_settable;
+#endif
+
+static struct clock_cmode __pminitdata undef_clock_cmode = { _x1, _x1, _x1, _x1, _x1 };
+
+static struct clock_cmode __pminitdata clock_cmodes_fr401_fr403[16] = {
+	[4]	= {	_x1,	_x1,	_x2,	_x2,	_x0_25	},
+	[5]	= { 	_x1,	_x2,	_x4,	_x4,	_x0_5	},
+	[8]	= { 	_x1,	_x1,	_x1,	_x2,	_x0_25	},
+	[9]	= { 	_x1,	_x2,	_x2,	_x4,	_x0_5	},
+	[11]	= { 	_x1,	_x4,	_x4,	_x8,	_x1	},
+	[12]	= { 	_x1,	_x1,	_x2,	_x4,	_x0_5	},
+	[13]	= { 	_x1,	_x2,	_x4,	_x8,	_x1	},
+};
+
+static struct clock_cmode __pminitdata clock_cmodes_fr405[16] = {
+	[0]	= {	_x1,	_x1,	_x1,	_x1,	_x0_5	},
+	[1]	= {	_x1,	_x1,	_x1,	_x3,	_x0_25	},
+	[2]	= {	_x1,	_x1,	_x2,	_x6,	_x0_5	},
+	[3]	= {	_x1,	_x2,	_x2,	_x6,	_x0_5	},
+	[4]	= {	_x1,	_x1,	_x2,	_x2,	_x0_16	},
+	[8]	= { 	_x1,	_x1,	_x1,	_x2,	_x0_16	},
+	[9]	= { 	_x1,	_x2,	_x2,	_x4,	_x0_33	},
+	[12]	= { 	_x1,	_x1,	_x2,	_x4,	_x0_33	},
+	[14]	= { 	_x1,	_x3,	_x3,	_x9,	_x0_75	},
+	[15]	= { 	_x1,	_x1_5,	_x1_5,	_x4_5,	_x0_375	},
+
+#define CLOCK_CMODES_PERMITTED_FR405 0xd31f
+};
+
+static struct clock_cmode __pminitdata clock_cmodes_fr555[16] = {
+	[0]	= {	_x1,	_x2,	_x2,	_x4,	_x0_33	},
+	[1]	= {	_x1,	_x3,	_x3,	_x6,	_x0_5	},
+	[2]	= {	_x1,	_x2,	_x4,	_x8,	_x0_66	},
+	[3]	= {	_x1,	_x1_5,	_x3,	_x6,	_x0_5	},
+	[4]	= {	_x1,	_x3,	_x3,	_x9,	_x0_75	},
+	[5]	= {	_x1,	_x2,	_x2,	_x6,	_x0_5	},
+	[6]	= {	_x1,	_x1_5,	_x1_5,	_x4_5,	_x0_375	},
+};
+
+static const struct clock_cmode __pminitdata *clock_cmodes;
+static int __pminitdata clock_doubled;
+
+static struct uart_port __pminitdata __frv_uart0 = {
+	.uartclk		= 0,
+	.membase		= (char *) UART0_BASE,
+	.irq			= IRQ_CPU_UART0,
+	.regshift		= 3,
+	.iotype			= UPIO_MEM,
+	.flags			= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+};
+
+static struct uart_port __pminitdata __frv_uart1 = {
+	.uartclk		= 0,
+	.membase		= (char *) UART1_BASE,
+	.irq			= IRQ_CPU_UART1,
+	.regshift		= 3,
+	.iotype			= UPIO_MEM,
+	.flags			= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+};
+
+#if 0
+static void __init printk_xampr(unsigned long ampr, unsigned long amlr, char i_d, int n)
+{
+	unsigned long phys, virt, cxn, size;
+
+#ifdef CONFIG_MMU
+	virt = amlr & 0xffffc000;
+	cxn = amlr & 0x3fff;
+#else
+	virt = ampr & 0xffffc000;
+	cxn = 0;
+#endif
+	phys = ampr & xAMPRx_PPFN;
+	size = 1 << (((ampr & xAMPRx_SS) >> 4) + 17);
+
+	printk("%cAMPR%d: va %08lx-%08lx [pa %08lx] %c%c%c%c [cxn:%04lx]\n",
+	       i_d, n,
+	       virt, virt + size - 1,
+	       phys,
+	       ampr & xAMPRx_S  ? 'S' : '-',
+	       ampr & xAMPRx_C  ? 'C' : '-',
+	       ampr & DAMPRx_WP ? 'W' : '-',
+	       ampr & xAMPRx_V  ? 'V' : '-',
+	       cxn
+	       );
+}
+#endif
+
+/*****************************************************************************/
+/*
+ * dump the memory map
+ */
+static void __init dump_memory_map(void)
+{
+
+#if 0
+	/* dump the protection map */
+	printk_xampr(__get_IAMPR(0),  __get_IAMLR(0),  'I', 0);
+	printk_xampr(__get_IAMPR(1),  __get_IAMLR(1),  'I', 1);
+	printk_xampr(__get_IAMPR(2),  __get_IAMLR(2),  'I', 2);
+	printk_xampr(__get_IAMPR(3),  __get_IAMLR(3),  'I', 3);
+	printk_xampr(__get_IAMPR(4),  __get_IAMLR(4),  'I', 4);
+	printk_xampr(__get_IAMPR(5),  __get_IAMLR(5),  'I', 5);
+	printk_xampr(__get_IAMPR(6),  __get_IAMLR(6),  'I', 6);
+	printk_xampr(__get_IAMPR(7),  __get_IAMLR(7),  'I', 7);
+	printk_xampr(__get_IAMPR(8),  __get_IAMLR(8),  'I', 8);
+	printk_xampr(__get_IAMPR(9),  __get_IAMLR(9),  'i', 9);
+	printk_xampr(__get_IAMPR(10), __get_IAMLR(10), 'I', 10);
+	printk_xampr(__get_IAMPR(11), __get_IAMLR(11), 'I', 11);
+	printk_xampr(__get_IAMPR(12), __get_IAMLR(12), 'I', 12);
+	printk_xampr(__get_IAMPR(13), __get_IAMLR(13), 'I', 13);
+	printk_xampr(__get_IAMPR(14), __get_IAMLR(14), 'I', 14);
+	printk_xampr(__get_IAMPR(15), __get_IAMLR(15), 'I', 15);
+
+	printk_xampr(__get_DAMPR(0),  __get_DAMLR(0),  'D', 0);
+	printk_xampr(__get_DAMPR(1),  __get_DAMLR(1),  'D', 1);
+	printk_xampr(__get_DAMPR(2),  __get_DAMLR(2),  'D', 2);
+	printk_xampr(__get_DAMPR(3),  __get_DAMLR(3),  'D', 3);
+	printk_xampr(__get_DAMPR(4),  __get_DAMLR(4),  'D', 4);
+	printk_xampr(__get_DAMPR(5),  __get_DAMLR(5),  'D', 5);
+	printk_xampr(__get_DAMPR(6),  __get_DAMLR(6),  'D', 6);
+	printk_xampr(__get_DAMPR(7),  __get_DAMLR(7),  'D', 7);
+	printk_xampr(__get_DAMPR(8),  __get_DAMLR(8),  'D', 8);
+	printk_xampr(__get_DAMPR(9),  __get_DAMLR(9),  'D', 9);
+	printk_xampr(__get_DAMPR(10), __get_DAMLR(10), 'D', 10);
+	printk_xampr(__get_DAMPR(11), __get_DAMLR(11), 'D', 11);
+	printk_xampr(__get_DAMPR(12), __get_DAMLR(12), 'D', 12);
+	printk_xampr(__get_DAMPR(13), __get_DAMLR(13), 'D', 13);
+	printk_xampr(__get_DAMPR(14), __get_DAMLR(14), 'D', 14);
+	printk_xampr(__get_DAMPR(15), __get_DAMLR(15), 'D', 15);
+#endif
+
+#if 0
+	/* dump the bus controller registers */
+	printk("LGCR: %08lx\n", __get_LGCR());
+	printk("Master: %08lx-%08lx CR=%08lx\n",
+	       __get_LEMBR(), __get_LEMBR() + __get_LEMAM(),
+	       __get_LMAICR());
+
+	int loop;
+	for (loop = 1; loop <= 7; loop++) {
+		unsigned long lcr = __get_LCR(loop), lsbr = __get_LSBR(loop);
+		printk("CS#%d: %08lx-%08lx %c%c%c%c%c%c%c%c%c\n",
+		       loop,
+		       lsbr, lsbr + __get_LSAM(loop),
+		       lcr & 0x80000000 ? 'r' : '-',
+		       lcr & 0x40000000 ? 'w' : '-',
+		       lcr & 0x08000000 ? 'b' : '-',
+		       lcr & 0x04000000 ? 'B' : '-',
+		       lcr & 0x02000000 ? 'C' : '-',
+		       lcr & 0x01000000 ? 'D' : '-',
+		       lcr & 0x00800000 ? 'W' : '-',
+		       lcr & 0x00400000 ? 'R' : '-',
+		       (lcr & 0x00030000) == 0x00000000 ? '4' :
+		       (lcr & 0x00030000) == 0x00010000 ? '2' :
+		       (lcr & 0x00030000) == 0x00020000 ? '1' :
+		       '-'
+		       );
+	}
+#endif
+
+#if 0
+	printk("\n");
+#endif
+} /* end dump_memory_map() */
+
+/*****************************************************************************/
+/*
+ * attempt to detect a VDK motherboard and DAV daughter board on an MB93091 system
+ */
+#ifdef CONFIG_MB93091_VDK
+static void __init detect_mb93091(void)
+{
+#ifdef CONFIG_MB93090_MB00
+	/* Detect CB70 without motherboard */
+	if (!(cpu_system == __frv_mb93091_cb70 && ((*(unsigned short *)0xffc00030) & 0x100))) {
+		cpu_board1 = __frv_mb93090_mb00;
+		mb93090_mb00_detected = 1;
+	}
+#endif
+
+#ifdef CONFIG_FUJITSU_MB93493
+	cpu_board2 = __frv_mb93493;
+#endif
+
+} /* end detect_mb93091() */
+#endif
+
+/*****************************************************************************/
+/*
+ * determine the CPU type and set appropriate parameters
+ *
+ * Family     Series      CPU Core    Silicon    Imple  Vers
+ * ----------------------------------------------------------
+ * FR-V --+-> FR400 --+-> FR401 --+-> MB93401     02     00 [1]
+ *        |           |           |
+ *        |           |           +-> MB93401/A   02     01
+ *        |           |           |
+ *        |           |           +-> MB93403     02     02
+ *        |           |
+ *        |           +-> FR405 ----> MB93405     04     00
+ *        |
+ *        +-> FR450 ----> FR451 ----> MB93451     05     00
+ *        |
+ *        +-> FR500 ----> FR501 --+-> MB93501     01     01 [2]
+ *        |                       |
+ *        |                       +-> MB93501/A   01     02
+ *        |
+ *        +-> FR550 --+-> FR551 ----> MB93555     03     01
+ *
+ *  [1] The MB93401 is an obsolete CPU replaced by the MB93401A
+ *  [2] The MB93501 is an obsolete CPU replaced by the MB93501A
+ *
+ * Imple is PSR(Processor Status Register)[31:28].
+ * Vers is PSR(Processor Status Register)[27:24].
+ *
+ * A "Silicon" consists of CPU core and some on-chip peripherals.
+ */
+static void __init determine_cpu(void)
+{
+	unsigned long hsr0 = __get_HSR(0);
+	unsigned long psr = __get_PSR();
+
+	/* work out what selectable services the CPU supports */
+	__set_PSR(psr | PSR_EM | PSR_EF | PSR_CM | PSR_NEM);
+	cpu_psr_all = __get_PSR();
+	__set_PSR(psr);
+
+	__set_HSR(0, hsr0 | HSR0_GRLE | HSR0_GRHE | HSR0_FRLE | HSR0_FRHE);
+	cpu_hsr0_all = __get_HSR(0);
+	__set_HSR(0, hsr0);
+
+	/* derive other service specs from the CPU type */
+	cpu_series		= "unknown";
+	cpu_core		= "unknown";
+	cpu_silicon		= "unknown";
+	cpu_mmu			= "Prot";
+	cpu_system		= __frv_unknown_system;
+	clock_cmodes		= NULL;
+	clock_doubled		= 0;
+#ifdef CONFIG_PM
+	clock_bits_settable	= CLOCK_BIT_CM_H | CLOCK_BIT_CM_M | CLOCK_BIT_P0;
+#endif
+
+	switch (PSR_IMPLE(psr)) {
+	case PSR_IMPLE_FR401:
+		cpu_series	= "fr400";
+		cpu_core	= "fr401";
+		pdm_suspend_mode = HSR0_PDM_PLL_RUN;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR401_MB93401:
+			cpu_silicon	= "mb93401";
+			cpu_system	= __frv_mb93091_cb10;
+			clock_cmodes	= clock_cmodes_fr401_fr403;
+			clock_doubled	= 1;
+			break;
+		case PSR_VERSION_FR401_MB93401A:
+			cpu_silicon	= "mb93401/A";
+			cpu_system	= __frv_mb93091_cb11;
+			clock_cmodes	= clock_cmodes_fr401_fr403;
+			break;
+		case PSR_VERSION_FR401_MB93403:
+			cpu_silicon	= "mb93403";
+#ifndef CONFIG_MB93093_PDK
+			cpu_system	= __frv_mb93091_cb30;
+#else
+			cpu_system	= __frv_mb93093;
+#endif
+			clock_cmodes	= clock_cmodes_fr401_fr403;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR405:
+		cpu_series	= "fr400";
+		cpu_core	= "fr405";
+		pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR405_MB93405:
+			cpu_silicon	= "mb93405";
+			cpu_system	= __frv_mb93091_cb60;
+			clock_cmodes	= clock_cmodes_fr405;
+#ifdef CONFIG_PM
+			clock_bits_settable |= CLOCK_BIT_CMODE;
+			clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
+#endif
+
+			/* the FPGA on the CB70 has extra registers
+			 * - it has 0x0046 in the VDK_ID FPGA register at 0x1a0, which is
+			 *   how we tell the difference between it and a CB60
+			 */
+			if (*(volatile unsigned short *) 0xffc001a0 == 0x0046)
+				cpu_system = __frv_mb93091_cb70;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR451:
+		cpu_series	= "fr450";
+		cpu_core	= "fr451";
+		pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+#ifdef CONFIG_PM
+		clock_bits_settable |= CLOCK_BIT_CMODE;
+		clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
+#endif
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR451_MB93451:
+			cpu_silicon	= "mb93451";
+			cpu_mmu		= "Prot, SAT, xSAT, DAT";
+			cpu_system	= __frv_mb93091_cb451;
+			clock_cmodes	= clock_cmodes_fr405;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR501:
+		cpu_series	= "fr500";
+		cpu_core	= "fr501";
+		pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR501_MB93501:  cpu_silicon = "mb93501";   break;
+		case PSR_VERSION_FR501_MB93501A: cpu_silicon = "mb93501/A"; break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR551:
+		cpu_series	= "fr550";
+		cpu_core	= "fr551";
+		pdm_suspend_mode = HSR0_PDM_PLL_RUN;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR551_MB93555:
+			cpu_silicon	= "mb93555";
+			cpu_mmu		= "Prot, SAT";
+			cpu_system	= __frv_mb93091_cb41;
+			clock_cmodes	= clock_cmodes_fr555;
+			clock_doubled	= 1;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	printk("- Series:%s CPU:%s Silicon:%s\n",
+	       cpu_series, cpu_core, cpu_silicon);
+
+#ifdef CONFIG_MB93091_VDK
+	detect_mb93091();
+#endif
+
+#if defined(CONFIG_MB93093_PDK) && defined(CONFIG_FUJITSU_MB93493)
+	cpu_board2 = __frv_mb93493;
+#endif
+
+} /* end determine_cpu() */
+
+/*****************************************************************************/
+/*
+ * calculate the bus clock speed
+ */
+void __pminit determine_clocks(int verbose)
+{
+	const struct clock_cmode *mode, *tmode;
+	unsigned long clkc, psr, quot;
+
+	clkc = __get_CLKC();
+	psr = __get_PSR();
+
+	clock_p0_current = !!(clkc & CLKC_P0);
+	clock_cm_current = clkc & CLKC_CM;
+	clock_cmode_current = (clkc & CLKC_CMODE) >> CLKC_CMODE_s;
+
+	if (verbose)
+		printk("psr=%08lx hsr0=%08lx clkc=%08lx\n", psr, __get_HSR(0), clkc);
+
+	/* the CB70 has some alternative ways of setting the clock speed through switches accessed
+	 * through the FPGA.  */
+	if (cpu_system == __frv_mb93091_cb70) {
+		unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
+
+		if (clkswr & 0x1000)
+			__clkin_clock_speed_HZ = 60000000UL;
+		else
+			__clkin_clock_speed_HZ =
+				((clkswr >> 8) & 0xf) * 10000000 +
+				((clkswr >> 4) & 0xf) * 1000000 +
+				((clkswr     ) & 0xf) * 100000;
+	}
+	/* the FR451 is currently fixed at 24MHz */
+	else if (cpu_system == __frv_mb93091_cb451) {
+		//__clkin_clock_speed_HZ = 24000000UL; // CB451-FPGA
+		unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
+
+		if (clkswr & 0x1000)
+			__clkin_clock_speed_HZ = 60000000UL;
+		else
+			__clkin_clock_speed_HZ =
+				((clkswr >> 8) & 0xf) * 10000000 +
+				((clkswr >> 4) & 0xf) * 1000000 +
+				((clkswr     ) & 0xf) * 100000;
+	}
+	/* otherwise determine the clockspeed from VDK or other registers */
+	else {
+		__clkin_clock_speed_HZ = __get_CLKIN();
+	}
+
+	/* look up the appropriate clock relationships table entry */
+	mode = &undef_clock_cmode;
+	if (clock_cmodes) {
+		tmode = &clock_cmodes[(clkc & CLKC_CMODE) >> CLKC_CMODE_s];
+		if (tmode->xbus)
+			mode = tmode;
+	}
+
+#define CLOCK(SRC,RATIO) ((SRC) * (((RATIO) >> 4) & 0x0f) / ((RATIO) & 0x0f))
+
+	if (clock_doubled)
+		__clkin_clock_speed_HZ <<= 1;
+
+	__ext_bus_clock_speed_HZ	= CLOCK(__clkin_clock_speed_HZ, mode->xbus);
+	__sdram_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+	__dsu_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->dsu);
+
+	switch (clkc & CLKC_CM) {
+	case 0: /* High */
+		__core_bus_clock_speed_HZ	= CLOCK(__clkin_clock_speed_HZ, mode->corebus);
+		__core_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->core);
+		break;
+	case 1: /* Medium */
+		__core_bus_clock_speed_HZ	= CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+		__core_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+		break;
+	case 2: /* Low; not supported */
+	case 3: /* UNDEF */
+		printk("Unsupported CLKC CM %ld\n", clkc & CLKC_CM);
+		panic("Bye");
+	}
+
+	__res_bus_clock_speed_HZ = __ext_bus_clock_speed_HZ;
+	if (clkc & CLKC_P0)
+		__res_bus_clock_speed_HZ >>= 1;
+
+	if (verbose) {
+		printk("CLKIN: %lu.%3.3luMHz\n",
+		       __clkin_clock_speed_HZ / 1000000,
+		       (__clkin_clock_speed_HZ / 1000) % 1000);
+
+		printk("CLKS:"
+		       " ext=%luMHz res=%luMHz sdram=%luMHz cbus=%luMHz core=%luMHz dsu=%luMHz\n",
+		       __ext_bus_clock_speed_HZ / 1000000,
+		       __res_bus_clock_speed_HZ / 1000000,
+		       __sdram_clock_speed_HZ / 1000000,
+		       __core_bus_clock_speed_HZ / 1000000,
+		       __core_clock_speed_HZ / 1000000,
+		       __dsu_clock_speed_HZ / 1000000
+		       );
+	}
+
+	/* calculate the number of __delay() loop iterations per sec (2 insn loop) */
+	__delay_loops_MHz = __core_clock_speed_HZ / (1000000 * 2);
+
+	/* set the serial prescaler */
+	__serial_clock_speed_HZ = __res_bus_clock_speed_HZ;
+	quot = 1;
+	while (__serial_clock_speed_HZ / quot / 16 / 65536 > 3000)
+		quot += 1;
+
+	/* double the divisor if P0 is clear, so that if/when P0 is set, it's still achievable
+	 * - we have to be careful - dividing too much can mean we can't get 115200 baud
+	 */
+	if (__serial_clock_speed_HZ > 32000000 && !(clkc & CLKC_P0))
+		quot <<= 1;
+
+	__serial_clock_speed_HZ /= quot;
+	__frv_uart0.uartclk = __serial_clock_speed_HZ;
+	__frv_uart1.uartclk = __serial_clock_speed_HZ;
+
+	if (verbose)
+		printk("      uart=%luMHz\n", __serial_clock_speed_HZ / 1000000 * quot);
+
+	while (!(__get_UART0_LSR() & UART_LSR_TEMT))
+		continue;
+
+	while (!(__get_UART1_LSR() & UART_LSR_TEMT))
+		continue;
+
+	__set_UCPVR(quot);
+	__set_UCPSR(0);
+} /* end determine_clocks() */
+
+/*****************************************************************************/
+/*
+ * reserve some DMA consistent memory
+ */
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+static void __init reserve_dma_coherent(void)
+{
+	unsigned long ampr;
+
+	/* find the first non-kernel memory tile and steal it */
+#define __steal_AMPR(r)						\
+	if (__get_DAMPR(r) & xAMPRx_V) {			\
+		ampr = __get_DAMPR(r);				\
+		__set_DAMPR(r, ampr | xAMPRx_S | xAMPRx_C);	\
+		__set_IAMPR(r, 0);				\
+		goto found;					\
+	}
+
+	__steal_AMPR(1);
+	__steal_AMPR(2);
+	__steal_AMPR(3);
+	__steal_AMPR(4);
+	__steal_AMPR(5);
+	__steal_AMPR(6);
+
+	if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551) {
+		__steal_AMPR(7);
+		__steal_AMPR(8);
+		__steal_AMPR(9);
+		__steal_AMPR(10);
+		__steal_AMPR(11);
+		__steal_AMPR(12);
+		__steal_AMPR(13);
+		__steal_AMPR(14);
+	}
+
+	/* unable to grant any DMA consistent memory */
+	printk("No DMA consistent memory reserved\n");
+	return;
+
+ found:
+	dma_coherent_mem_start = ampr & xAMPRx_PPFN;
+	ampr &= xAMPRx_SS;
+	ampr >>= 4;
+	ampr = 1 << (ampr - 3 + 20);
+	dma_coherent_mem_end = dma_coherent_mem_start + ampr;
+
+	printk("DMA consistent memory reserved %lx-%lx\n",
+	       dma_coherent_mem_start, dma_coherent_mem_end);
+
+} /* end reserve_dma_coherent() */
+#endif
+
+/*****************************************************************************/
+/*
+ * calibrate the delay loop
+ */
+void __cpuinit calibrate_delay(void)
+{
+	loops_per_jiffy = __delay_loops_MHz * (1000000 / HZ);
+
+	printk("Calibrating delay loop... %lu.%02lu BogoMIPS\n",
+	       loops_per_jiffy / (500000 / HZ),
+	       (loops_per_jiffy / (5000 / HZ)) % 100);
+
+} /* end calibrate_delay() */
+
+/*****************************************************************************/
+/*
+ * look through the command line for some things we need to know immediately
+ */
+static void __init parse_cmdline_early(char *cmdline)
+{
+	if (!cmdline)
+		return;
+
+	while (*cmdline) {
+		if (*cmdline == ' ')
+			cmdline++;
+
+		/* "mem=XXX[kKmM]" sets SDRAM size to <mem>, overriding the value we worked
+		 * out from the SDRAM controller mask register
+		 */
+		if (!memcmp(cmdline, "mem=", 4)) {
+			unsigned long long mem_size;
+
+			mem_size = memparse(cmdline + 4, &cmdline);
+			memory_end = memory_start + mem_size;
+		}
+
+		while (*cmdline && *cmdline != ' ')
+			cmdline++;
+	}
+
+} /* end parse_cmdline_early() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_MMU
+	printk("Linux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
+#else
+	printk("uClinux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
+#endif
+
+	memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE);
+
+	determine_cpu();
+	determine_clocks(1);
+
+	/* For printk-directly-beats-on-serial-hardware hack */
+	console_set_baud(115200);
+#ifdef CONFIG_GDBSTUB
+	gdbstub_set_baud(115200);
+#endif
+
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+	reserve_dma_coherent();
+#endif
+	dump_memory_map();
+
+#ifdef CONFIG_MB93090_MB00
+	if (mb93090_mb00_detected)
+		mb93090_display();
+#endif
+
+	/* register those serial ports that are available */
+#ifdef CONFIG_FRV_ONCPU_SERIAL
+#ifndef CONFIG_GDBSTUB_UART0
+	__reg(UART0_BASE + UART_IER * 8) = 0;
+	early_serial_setup(&__frv_uart0);
+#endif
+#ifndef CONFIG_GDBSTUB_UART1
+	__reg(UART1_BASE + UART_IER * 8) = 0;
+	early_serial_setup(&__frv_uart1);
+#endif
+#endif
+
+	/* deal with the command line - RedBoot may have passed one to the kernel */
+	memcpy(command_line, boot_command_line, sizeof(command_line));
+	*cmdline_p = &command_line[0];
+	parse_cmdline_early(command_line);
+
+	/* set up the memory description
+	 * - by now the stack is part of the init task */
+	printk("Memory %08lx-%08lx\n", memory_start, memory_end);
+
+	BUG_ON(memory_start == memory_end);
+
+	init_mm.start_code = (unsigned long) &_stext;
+	init_mm.end_code = (unsigned long) &_etext;
+	init_mm.end_data = (unsigned long) &_edata;
+#if 0 /* DAVIDM - don't set brk just incase someone decides to use it */
+	init_mm.brk = (unsigned long) &_end;
+#else
+	init_mm.brk = (unsigned long) 0;
+#endif
+
+#ifdef DEBUG
+	printk("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x BSS=0x%06x-0x%06x\n",
+	       (int) &_stext, (int) &_etext,
+	       (int) &_sdata, (int) &_edata,
+	       (int) &_sbss, (int) &_ebss);
+#endif
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+        conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+        conswitchp = &dummy_con;
+#endif
+#endif
+
+#ifdef CONFIG_MMU
+	setup_linux_memory();
+#else
+	setup_uclinux_memory();
+#endif
+
+	/* get kmalloc into gear */
+	paging_init();
+
+	/* init DMA */
+	frv_dma_init();
+#ifdef DEBUG
+	printk("Done setup_arch\n");
+#endif
+
+	/* start the decrement timer running */
+//	asm volatile("movgs %0,timerd" :: "r"(10000000));
+//	__set_HSR(0, __get_HSR(0) | HSR0_ETMD);
+
+} /* end setup_arch() */
+
+#if 0
+/*****************************************************************************/
+/*
+ *
+ */
+static int __devinit setup_arch_serial(void)
+{
+	/* register those serial ports that are available */
+#ifndef CONFIG_GDBSTUB_UART0
+	early_serial_setup(&__frv_uart0);
+#endif
+#ifndef CONFIG_GDBSTUB_UART1
+	early_serial_setup(&__frv_uart1);
+#endif
+
+	return 0;
+} /* end setup_arch_serial() */
+
+late_initcall(setup_arch_serial);
+#endif
+
+/*****************************************************************************/
+/*
+ * set up the memory map for normal MMU linux
+ */
+#ifdef CONFIG_MMU
+static void __init setup_linux_memory(void)
+{
+	unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem;
+
+	kstart	= (unsigned long) &__kernel_image_start - PAGE_OFFSET;
+	kend	= (unsigned long) &__kernel_image_end - PAGE_OFFSET;
+
+	kstart = kstart & PAGE_MASK;
+	kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
+
+	/* give all the memory to the bootmap allocator,  tell it to put the
+	 * boot mem_map immediately following the kernel image
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 kend >> PAGE_SHIFT,		/* map addr */
+					 memory_start >> PAGE_SHIFT,	/* start of RAM */
+					 memory_end >> PAGE_SHIFT	/* end of RAM */
+					 );
+
+	/* pass the memory that the kernel can immediately use over to the bootmem allocator */
+	max_mapnr = num_physpages = (memory_end - memory_start) >> PAGE_SHIFT;
+	low_top_pfn = (KERNEL_LOWMEM_END - KERNEL_LOWMEM_START) >> PAGE_SHIFT;
+	high_mem = 0;
+
+	if (num_physpages > low_top_pfn) {
+#ifdef CONFIG_HIGHMEM
+		high_mem = num_physpages - low_top_pfn;
+#else
+		max_mapnr = num_physpages = low_top_pfn;
+#endif
+	}
+	else {
+		low_top_pfn = num_physpages;
+	}
+
+	min_low_pfn = memory_start >> PAGE_SHIFT;
+	max_low_pfn = low_top_pfn;
+	max_pfn = memory_end >> PAGE_SHIFT;
+
+	num_mappedpages = low_top_pfn;
+
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n", low_top_pfn >> (20 - PAGE_SHIFT));
+
+	free_bootmem(memory_start, low_top_pfn << PAGE_SHIFT);
+
+#ifdef CONFIG_HIGHMEM
+	if (high_mem)
+		printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", high_mem >> (20 - PAGE_SHIFT));
+#endif
+
+	/* take back the memory occupied by the kernel image and the bootmem alloc map */
+	reserve_bootmem(kstart, kend - kstart + bootmap_size,
+			BOOTMEM_DEFAULT);
+
+	/* reserve the memory occupied by the initial ramdisk */
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (low_top_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE,
+					BOOTMEM_DEFAULT);
+			initrd_start = INITRD_START + PAGE_OFFSET;
+			initrd_end = initrd_start + INITRD_SIZE;
+		}
+		else {
+			printk(KERN_ERR
+			       "initrd extends beyond end of memory (0x%08lx > 0x%08lx)\n"
+			       "disabling initrd\n",
+			       INITRD_START + INITRD_SIZE,
+			       low_top_pfn << PAGE_SHIFT);
+			initrd_start = 0;
+		}
+	}
+#endif
+
+} /* end setup_linux_memory() */
+#endif
+
+/*****************************************************************************/
+/*
+ * set up the memory map for uClinux
+ */
+#ifndef CONFIG_MMU
+static void __init setup_uclinux_memory(void)
+{
+#ifdef CONFIG_PROTECT_KERNEL
+	unsigned long dampr;
+#endif
+	unsigned long kend;
+	int bootmap_size;
+
+	kend = (unsigned long) &__kernel_image_end;
+	kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
+
+	/* give all the memory to the bootmap allocator,  tell it to put the
+	 * boot mem_map immediately following the kernel image
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 kend >> PAGE_SHIFT,		/* map addr */
+					 memory_start >> PAGE_SHIFT,	/* start of RAM */
+					 memory_end >> PAGE_SHIFT	/* end of RAM */
+					 );
+
+	/* free all the usable memory */
+	free_bootmem(memory_start, memory_end - memory_start);
+
+	high_memory = (void *) (memory_end & PAGE_MASK);
+	max_mapnr = num_physpages = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+
+	min_low_pfn = memory_start >> PAGE_SHIFT;
+	max_low_pfn = memory_end >> PAGE_SHIFT;
+	max_pfn = max_low_pfn;
+
+	/* now take back the bits the core kernel is occupying */
+#ifndef CONFIG_PROTECT_KERNEL
+	reserve_bootmem(kend, bootmap_size, BOOTMEM_DEFAULT);
+	reserve_bootmem((unsigned long) &__kernel_image_start,
+			kend - (unsigned long) &__kernel_image_start,
+			BOOTMEM_DEFAULT);
+
+#else
+	dampr = __get_DAMPR(0);
+	dampr &= xAMPRx_SS;
+	dampr = (dampr >> 4) + 17;
+	dampr = 1 << dampr;
+
+	reserve_bootmem(__get_DAMPR(0) & xAMPRx_PPFN, dampr, BOOTMEM_DEFAULT);
+#endif
+
+	/* reserve some memory to do uncached DMA through if requested */
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+	if (dma_coherent_mem_start)
+		reserve_bootmem(dma_coherent_mem_start,
+				dma_coherent_mem_end - dma_coherent_mem_start,
+				BOOTMEM_DEFAULT);
+#endif
+
+} /* end setup_uclinux_memory() */
+#endif
+
+/*****************************************************************************/
+/*
+ * get CPU information for use by procfs
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	const char *gr, *fr, *fm, *fp, *cm, *nem, *ble;
+#ifdef CONFIG_PM
+	const char *sep;
+#endif
+
+	gr  = cpu_hsr0_all & HSR0_GRHE	? "gr0-63"	: "gr0-31";
+	fr  = cpu_hsr0_all & HSR0_FRHE	? "fr0-63"	: "fr0-31";
+	fm  = cpu_psr_all  & PSR_EM	? ", Media"	: "";
+	fp  = cpu_psr_all  & PSR_EF	? ", FPU"	: "";
+	cm  = cpu_psr_all  & PSR_CM	? ", CCCR"	: "";
+	nem = cpu_psr_all  & PSR_NEM	? ", NE"	: "";
+	ble = cpu_psr_all  & PSR_BE	? "BE"		: "LE";
+
+	seq_printf(m,
+		   "CPU-Series:\t%s\n"
+		   "CPU-Core:\t%s, %s, %s%s%s\n"
+		   "CPU:\t\t%s\n"
+		   "MMU:\t\t%s\n"
+		   "FP-Media:\t%s%s%s\n"
+		   "System:\t\t%s",
+		   cpu_series,
+		   cpu_core, gr, ble, cm, nem,
+		   cpu_silicon,
+		   cpu_mmu,
+		   fr, fm, fp,
+		   cpu_system);
+
+	if (cpu_board1)
+		seq_printf(m, ", %s", cpu_board1);
+
+	if (cpu_board2)
+		seq_printf(m, ", %s", cpu_board2);
+
+	seq_printf(m, "\n");
+
+#ifdef CONFIG_PM
+	seq_printf(m, "PM-Controls:");
+	sep = "\t";
+
+	if (clock_bits_settable & CLOCK_BIT_CMODE) {
+		seq_printf(m, "%scmode=0x%04hx", sep, clock_cmodes_permitted);
+		sep = ", ";
+	}
+
+	if (clock_bits_settable & CLOCK_BIT_CM) {
+		seq_printf(m, "%scm=0x%lx", sep, clock_bits_settable & CLOCK_BIT_CM);
+		sep = ", ";
+	}
+
+	if (clock_bits_settable & CLOCK_BIT_P0) {
+		seq_printf(m, "%sp0=0x3", sep);
+		sep = ", ";
+	}
+
+	seq_printf(m, "%ssuspend=0x22\n", sep);
+#endif
+
+	seq_printf(m,
+		   "PM-Status:\tcmode=%d, cm=%d, p0=%d\n",
+		   clock_cmode_current, clock_cm_current, clock_p0_current);
+
+#define print_clk(TAG, VAR) \
+	seq_printf(m, "Clock-" TAG ":\t%lu.%2.2lu MHz\n", VAR / 1000000, (VAR / 10000) % 100)
+
+	print_clk("In",    __clkin_clock_speed_HZ);
+	print_clk("Core",  __core_clock_speed_HZ);
+	print_clk("SDRAM", __sdram_clock_speed_HZ);
+	print_clk("CBus",  __core_bus_clock_speed_HZ);
+	print_clk("Res",   __res_bus_clock_speed_HZ);
+	print_clk("Ext",   __ext_bus_clock_speed_HZ);
+	print_clk("DSU",   __dsu_clock_speed_HZ);
+
+	seq_printf(m,
+		   "BogoMips:\t%lu.%02lu\n",
+		   (loops_per_jiffy * HZ) / 500000, ((loops_per_jiffy * HZ) / 5000) % 100);
+
+	return 0;
+} /* end show_cpuinfo() */
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? (void *) 0x12345678 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+
+void arch_gettod(int *year, int *mon, int *day, int *hour,
+		 int *min, int *sec)
+{
+	*year = *mon = *day = *hour = *min = *sec = 0;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+#ifdef CONFIG_MB93090_MB00
+static void __init mb93090_sendlcdcmd(uint32_t cmd)
+{
+	unsigned long base = __addr_LCD();
+	int loop;
+
+	/* request reading of the busy flag */
+	__set_LCD(base, LCD_CMD_READ_BUSY);
+	__set_LCD(base, LCD_CMD_READ_BUSY & ~LCD_E);
+
+	/* wait for the busy flag to become clear */
+	for (loop = 10000; loop > 0; loop--)
+		if (!(__get_LCD(base) & 0x80))
+			break;
+
+	/* send the command */
+	__set_LCD(base, cmd);
+	__set_LCD(base, cmd & ~LCD_E);
+
+} /* end mb93090_sendlcdcmd() */
+
+/*****************************************************************************/
+/*
+ * write to the MB93090 LEDs and LCD
+ */
+static void __init mb93090_display(void)
+{
+	const char *p;
+
+	__set_LEDS(0);
+
+	/* set up the LCD */
+	mb93090_sendlcdcmd(LCD_CMD_CLEAR);
+	mb93090_sendlcdcmd(LCD_CMD_FUNCSET(1,1,0));
+	mb93090_sendlcdcmd(LCD_CMD_ON(0,0));
+	mb93090_sendlcdcmd(LCD_CMD_HOME);
+
+	mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(0));
+	for (p = mb93090_banner; *p; p++)
+		mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
+
+	mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(64));
+	for (p = mb93090_version; *p; p++)
+		mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
+
+} /* end mb93090_display() */
+
+#endif // CONFIG_MB93090_MB00
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
new file mode 100644
index 00000000..bab01298
--- /dev/null
+++ b/arch/frv/kernel/signal.c
@@ -0,0 +1,590 @@
+/* signal.c: FRV specific bits of signal handling
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/signal.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/personality.h>
+#include <linux/freezer.h>
+#include <linux/tracehook.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/cacheflush.h>
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+	mask &= _BLOCKABLE;
+	spin_lock_irq(&current->sighand->siglock);
+	current->saved_sigmask = current->blocked;
+	siginitset(&current->blocked, mask);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	return -ERESTARTNOHAND;
+}
+
+asmlinkage int sys_sigaction(int sig,
+			     const struct old_sigaction __user *act,
+			     struct old_sigaction __user *oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	if (act) {
+		old_sigset_t mask;
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+			return -EFAULT;
+		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		__get_user(mask, &act->sa_mask);
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+			return -EFAULT;
+		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+	}
+
+	return ret;
+}
+
+asmlinkage
+int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+{
+	return do_sigaltstack(uss, uoss, __frame->sp);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct sigframe
+{
+	__sigrestore_t pretcode;
+	int sig;
+	struct sigcontext sc;
+	unsigned long extramask[_NSIG_WORDS-1];
+	uint32_t retcode[2];
+};
+
+struct rt_sigframe
+{
+	__sigrestore_t pretcode;
+	int sig;
+	struct siginfo __user *pinfo;
+	void __user *puc;
+	struct siginfo info;
+	struct ucontext uc;
+	uint32_t retcode[2];
+};
+
+static int restore_sigcontext(struct sigcontext __user *sc, int *_gr8)
+{
+	struct user_context *user = current->thread.user;
+	unsigned long tbr, psr;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	tbr = user->i.tbr;
+	psr = user->i.psr;
+	if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context)))
+		goto badframe;
+	user->i.tbr = tbr;
+	user->i.psr = psr;
+
+	restore_user_regs(user);
+
+	user->i.syscallno = -1;		/* disable syscall checks */
+
+	*_gr8 = user->i.gr[8];
+	return 0;
+
+ badframe:
+	return 1;
+}
+
+asmlinkage int sys_sigreturn(void)
+{
+	struct sigframe __user *frame = (struct sigframe __user *) __frame->sp;
+	sigset_t set;
+	int gr8;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__get_user(set.sig[0], &frame->sc.sc_oldmask))
+		goto badframe;
+
+	if (_NSIG_WORDS > 1 &&
+	    __copy_from_user(&set.sig[1], &frame->extramask, sizeof(frame->extramask)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(&frame->sc, &gr8))
+		goto badframe;
+	return gr8;
+
+ badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *) __frame->sp;
+	sigset_t set;
+	int gr8;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(&frame->uc.uc_mcontext, &gr8))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT)
+		goto badframe;
+
+	return gr8;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame
+ */
+static int setup_sigcontext(struct sigcontext __user *sc, unsigned long mask)
+{
+	save_user_regs(current->thread.user);
+
+	if (copy_to_user(&sc->sc_context, current->thread.user, sizeof(sc->sc_context)) != 0)
+		goto badframe;
+
+	/* non-iBCS2 extensions.. */
+	if (__put_user(mask, &sc->sc_oldmask) < 0)
+		goto badframe;
+
+	return 0;
+
+ badframe:
+	return 1;
+}
+
+/*****************************************************************************/
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+					size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Default to using normal stack */
+	sp = __frame->sp;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (! sas_ss_flags(sp))
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	return (void __user *) ((sp - frame_size) & ~7UL);
+
+} /* end get_sigframe() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
+{
+	struct sigframe __user *frame;
+	int rsig;
+
+	set_fs(USER_DS);
+
+	frame = get_sigframe(ka, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	rsig = sig;
+	if (sig < 32 &&
+	    __current_thread_info->exec_domain &&
+	    __current_thread_info->exec_domain->signal_invmap)
+		rsig = __current_thread_info->exec_domain->signal_invmap[sig];
+
+	if (__put_user(rsig, &frame->sig) < 0)
+		goto give_sigsegv;
+
+	if (setup_sigcontext(&frame->sc, set->sig[0]))
+		goto give_sigsegv;
+
+	if (_NSIG_WORDS > 1) {
+		if (__copy_to_user(frame->extramask, &set->sig[1],
+				   sizeof(frame->extramask)))
+			goto give_sigsegv;
+	}
+
+	/* Set up to return from userspace.  If provided, use a stub
+	 * already in userspace.  */
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		if (__put_user(ka->sa.sa_restorer, &frame->pretcode) < 0)
+			goto give_sigsegv;
+	}
+	else {
+		/* Set up the following code on the stack:
+		 *	setlos	#__NR_sigreturn,gr7
+		 *	tira	gr0,0
+		 */
+		if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) ||
+		    __put_user(0x8efc0000|__NR_sigreturn, &frame->retcode[0]) ||
+		    __put_user(0xc0700000, &frame->retcode[1]))
+			goto give_sigsegv;
+
+		flush_icache_range((unsigned long) frame->retcode,
+				   (unsigned long) (frame->retcode + 2));
+	}
+
+	/* Set up registers for the signal handler */
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
+	} else {
+		__frame->pc   = (unsigned long) ka->sa.sa_handler;
+		__frame->gr15 = 0;
+	}
+
+	__frame->sp   = (unsigned long) frame;
+	__frame->lr   = (unsigned long) &frame->retcode;
+	__frame->gr8  = sig;
+
+	/* the tracer may want to single-step inside the handler */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+	printk("SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+	       sig, current->comm, current->pid, frame, __frame->pc,
+	       frame->pretcode);
+#endif
+
+	return 0;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+	return -EFAULT;
+
+} /* end setup_frame() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			  sigset_t *set)
+{
+	struct rt_sigframe __user *frame;
+	int rsig;
+
+	set_fs(USER_DS);
+
+	frame = get_sigframe(ka, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	rsig = sig;
+	if (sig < 32 &&
+	    __current_thread_info->exec_domain &&
+	    __current_thread_info->exec_domain->signal_invmap)
+		rsig = __current_thread_info->exec_domain->signal_invmap[sig];
+
+	if (__put_user(rsig,		&frame->sig) ||
+	    __put_user(&frame->info,	&frame->pinfo) ||
+	    __put_user(&frame->uc,	&frame->puc))
+		goto give_sigsegv;
+
+	if (copy_siginfo_to_user(&frame->info, info))
+		goto give_sigsegv;
+
+	/* Create the ucontext.  */
+	if (__put_user(0, &frame->uc.uc_flags) ||
+	    __put_user(NULL, &frame->uc.uc_link) ||
+	    __put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) ||
+	    __put_user(sas_ss_flags(__frame->sp), &frame->uc.uc_stack.ss_flags) ||
+	    __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size))
+		goto give_sigsegv;
+
+	if (setup_sigcontext(&frame->uc.uc_mcontext, set->sig[0]))
+		goto give_sigsegv;
+
+	if (__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)))
+		goto give_sigsegv;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	 * already in userspace.  */
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+			goto give_sigsegv;
+	}
+	else {
+		/* Set up the following code on the stack:
+		 *	setlos	#__NR_sigreturn,gr7
+		 *	tira	gr0,0
+		 */
+		if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) ||
+		    __put_user(0x8efc0000|__NR_rt_sigreturn, &frame->retcode[0]) ||
+		    __put_user(0xc0700000, &frame->retcode[1]))
+			goto give_sigsegv;
+
+		flush_icache_range((unsigned long) frame->retcode,
+				   (unsigned long) (frame->retcode + 2));
+	}
+
+	/* Set up registers for signal handler */
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
+	} else {
+		__frame->pc   = (unsigned long) ka->sa.sa_handler;
+		__frame->gr15 = 0;
+	}
+
+	__frame->sp  = (unsigned long) frame;
+	__frame->lr  = (unsigned long) &frame->retcode;
+	__frame->gr8 = sig;
+	__frame->gr9 = (unsigned long) &frame->info;
+
+	/* the tracer may want to single-step inside the handler */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+	printk("SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+	       sig, current->comm, current->pid, frame, __frame->pc,
+	       frame->pretcode);
+#endif
+
+	return 0;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+	return -EFAULT;
+
+} /* end setup_rt_frame() */
+
+/*****************************************************************************/
+/*
+ * OK, we're invoking a handler
+ */
+static int handle_signal(unsigned long sig, siginfo_t *info,
+			 struct k_sigaction *ka, sigset_t *oldset)
+{
+	int ret;
+
+	/* Are we from a system call? */
+	if (__frame->syscallno != -1) {
+		/* If so, check system call restarting.. */
+		switch (__frame->gr8) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			__frame->gr8 = -EINTR;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				__frame->gr8 = -EINTR;
+				break;
+			}
+
+			/* fallthrough */
+		case -ERESTARTNOINTR:
+			__frame->gr8 = __frame->orig_gr8;
+			__frame->pc -= 4;
+		}
+		__frame->syscallno = -1;
+	}
+
+	/* Set up the stack frame */
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		ret = setup_rt_frame(sig, ka, info, oldset);
+	else
+		ret = setup_frame(sig, ka, oldset);
+
+	if (ret == 0) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked, &current->blocked,
+			  &ka->sa.sa_mask);
+		if (!(ka->sa.sa_flags & SA_NODEFER))
+			sigaddset(&current->blocked, sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+
+	return ret;
+
+} /* end handle_signal() */
+
+/*****************************************************************************/
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+static void do_signal(void)
+{
+	struct k_sigaction ka;
+	siginfo_t info;
+	sigset_t *oldset;
+	int signr;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(__frame))
+		return;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, __frame, NULL);
+	if (signr > 0) {
+		if (handle_signal(signr, &info, &ka, oldset) == 0) {
+			/* a signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, __frame,
+						 test_thread_flag(TIF_SINGLESTEP));
+		}
+
+		return;
+	}
+
+no_signal:
+	/* Did we come from a system call? */
+	if (__frame->syscallno != -1) {
+		/* Restart the system call - no handlers present */
+		switch (__frame->gr8) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			__frame->gr8 = __frame->orig_gr8;
+			__frame->pc -= 4;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			__frame->gr7 = __NR_restart_syscall;
+			__frame->pc -= 4;
+			break;
+		}
+		__frame->syscallno = -1;
+	}
+
+	/* if there's no signal to deliver, we just put the saved sigmask
+	 * back */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
+} /* end do_signal() */
+
+/*****************************************************************************/
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+asmlinkage void do_notify_resume(__u32 thread_info_flags)
+{
+	/* pending single-step? */
+	if (thread_info_flags & _TIF_SINGLESTEP)
+		clear_thread_flag(TIF_SINGLESTEP);
+
+	/* deal with pending signal delivery */
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal();
+
+	/* deal with notification on about to resume userspace execution */
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(__frame);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
+	}
+
+} /* end do_notify_resume() */
diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S
new file mode 100644
index 00000000..f67bf73c
--- /dev/null
+++ b/arch/frv/kernel/sleep.S
@@ -0,0 +1,373 @@
+/* sleep.S: power saving mode entry
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Woodhouse (dwmw2@infradead.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <asm/spr-regs.h>
+
+#define __addr_MASK	0xfeff9820	/* interrupt controller mask */
+
+#define __addr_FR55X_DRCN	0xfeff0218      /* Address of DRCN register */
+#define FR55X_DSTS_OFFSET	-4		/* Offset from DRCN to DSTS */
+#define FR55X_SDRAMC_DSTS_SSI	0x00000002	/* indicates that the SDRAM is in self-refresh mode */
+
+#define __addr_FR4XX_DRCN	0xfe000430      /* Address of DRCN register */
+#define FR4XX_DSTS_OFFSET	-8		/* Offset from DRCN to DSTS */
+#define FR4XX_SDRAMC_DSTS_SSI	0x00000001	/* indicates that the SDRAM is in self-refresh mode */
+
+#define SDRAMC_DRCN_SR	0x00000001	/* transition SDRAM into self-refresh mode */
+
+	.section	.bss
+	.balign		8
+	.globl		__sleep_save_area
+__sleep_save_area:
+	.space		16
+
+
+	.text
+	.balign		4
+
+.macro li v r
+	sethi.p		%hi(\v),\r
+	setlo		%lo(\v),\r
+.endm
+
+#ifdef CONFIG_PM
+###############################################################################
+#
+# CPU suspension routine
+# - void frv_cpu_suspend(unsigned long pdm_mode)
+#
+###############################################################################
+	.globl		frv_cpu_suspend
+        .type		frv_cpu_suspend,@function
+frv_cpu_suspend:
+
+	#----------------------------------------------------
+	# save hsr0, psr, isr, and lr for resume code
+	#----------------------------------------------------
+	li		__sleep_save_area,gr11
+
+	movsg		hsr0,gr4
+	movsg		psr,gr5
+	movsg		isr,gr6
+	movsg		lr,gr7
+	stdi		gr4,@(gr11,#0)
+	stdi		gr6,@(gr11,#8)
+
+	# store the return address from sleep in GR14, and its complement in GR13 as a check
+	li		__ramboot_resume,gr14
+#ifdef CONFIG_MMU
+	# Resume via RAMBOOT# will turn MMU off, so bootloader needs a physical address.
+	sethi.p		%hi(__page_offset),gr13
+	setlo		%lo(__page_offset),gr13
+	sub		gr14,gr13,gr14
+#endif
+	not		gr14,gr13
+
+	#----------------------------------------------------
+	# preload and lock into icache that code which may have to run
+	# when dram is in self-refresh state.
+	#----------------------------------------------------
+	movsg		hsr0, gr3
+	li		HSR0_ICE,gr4
+	or		gr3,gr4,gr3
+	movgs		gr3,hsr0
+	or		gr3,gr8,gr7	// add the sleep bits for later
+
+	li		#__icache_lock_start,gr3
+	li		#__icache_lock_end,gr4
+1:	icpl		gr3,gr0,#1
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	# disable exceptions
+	movsg		psr,gr8
+	andi.p		gr8,#~PSR_PIL,gr8
+	andi		gr8,~PSR_ET,gr8
+	movgs		gr8,psr
+	ori		gr8,#PSR_ET,gr8
+
+	srli		gr8,#28,gr4
+	subicc		gr4,#3,gr0,icc0
+	beq		icc0,#0,1f
+	# FR4xx
+	li		__addr_FR4XX_DRCN,gr4
+	li		FR4XX_SDRAMC_DSTS_SSI,gr5
+	li		FR4XX_DSTS_OFFSET,gr6
+	bra		__icache_lock_start
+1:
+	# FR5xx
+	li		__addr_FR55X_DRCN,gr4
+	li		FR55X_SDRAMC_DSTS_SSI,gr5
+	li		FR55X_DSTS_OFFSET,gr6
+	bra		__icache_lock_start
+
+	.size		frv_cpu_suspend, .-frv_cpu_suspend
+
+#
+# the final part of the sleep sequence...
+# - we want it to be be cacheline aligned so we can lock it into the icache easily
+#  On entry:	gr7 holds desired hsr0 sleep value
+#               gr8 holds desired psr sleep value
+#
+	.balign		L1_CACHE_BYTES
+        .type		__icache_lock_start,@function
+__icache_lock_start:
+
+	#----------------------------------------------------
+	# put SDRAM in self-refresh mode
+	#----------------------------------------------------
+
+	# Flush all data in the cache using the DCEF instruction.
+	dcef		@(gr0,gr0),#1
+
+	# Stop DMAC transfer
+
+	# Execute dummy load from SDRAM
+	ldi		@(gr11,#0),gr11
+
+	# put the SDRAM into self-refresh mode
+	ld              @(gr4,gr0),gr11
+	ori		gr11,#SDRAMC_DRCN_SR,gr11
+	st		gr11,@(gr4,gr0)
+	membar
+
+	# wait for SDRAM to reach self-refresh mode
+1:	ld		@(gr4,gr6),gr11
+	andcc		gr11,gr5,gr11,icc0
+	beq		icc0,#0,1b
+
+	#  Set the GPIO register so that the IRQ[3:0] pins become valid, as required.
+	#  Set the clock mode (CLKC register) as required.
+	#     - At this time, also set the CLKC register P0 bit.
+
+	# Set the HSR0 register PDM field.
+	movgs		gr7,hsr0
+
+	# Execute NOP 32 times.
+	.rept		32
+	nop
+	.endr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	#      Release the interrupt mask setting of the MASK register of the
+	#      interrupt controller if necessary.
+	sti		gr10,@(gr9,#0)
+	membar
+#endif
+
+	# Set the PSR register ET bit to 1 to enable interrupts.
+	movgs		gr8,psr
+
+	###################################################
+	# this is only reached if waking up via interrupt
+	###################################################
+
+	# Execute NOP 32 times.
+	.rept		32
+	nop
+	.endr
+
+	#----------------------------------------------------
+	# wake SDRAM from self-refresh mode
+	#----------------------------------------------------
+	ld              @(gr4,gr0),gr11
+	andi		gr11,#~SDRAMC_DRCN_SR,gr11
+	st		gr11,@(gr4,gr0)
+	membar
+2:
+	ld		@(gr4,gr6),gr11	// Wait for it to come back...
+	andcc		gr11,gr5,gr0,icc0
+	bne		icc0,0,2b
+
+	# wait for the SDRAM to stabilise
+	li		0x0100000,gr3
+3:	subicc		gr3,#1,gr3,icc0
+	bne		icc0,#0,3b
+
+	# now that DRAM is back, this is the end of the code which gets
+	# locked in icache.
+__icache_lock_end:
+	.size		__icache_lock_start, .-__icache_lock_start
+
+	# Fall-through to the RAMBOOT# wakeup path
+
+###############################################################################
+#
+#  resume from suspend re-entry point reached via RAMBOOT# and bootloader
+#
+###############################################################################
+__ramboot_resume:
+
+	#----------------------------------------------------
+	# restore hsr0, psr, isr, and leave saved lr in gr7
+	#----------------------------------------------------
+	li		__sleep_save_area,gr11
+#ifdef CONFIG_MMU
+	movsg		hsr0,gr4
+	sethi.p		%hi(HSR0_EXMMU),gr3
+	setlo		%lo(HSR0_EXMMU),gr3
+	andcc		gr3,gr4,gr0,icc0
+	bne		icc0,#0,2f
+
+	# need to use physical address
+	sethi.p		%hi(__page_offset),gr3
+	setlo		%lo(__page_offset),gr3
+	sub		gr11,gr3,gr11
+
+	# flush all tlb entries
+	setlos		#64,gr4
+	setlos.p	#PAGE_SIZE,gr5
+	setlos		#0,gr6
+1:
+	tlbpr		gr6,gr0,#6,#0
+	subicc.p	gr4,#1,gr4,icc0
+	add		gr6,gr5,gr6
+	bne		icc0,#2,1b
+
+	# need a temporary mapping for the current physical address we are
+	# using between time MMU is enabled and jump to virtual address is
+	# made.
+	sethi.p		%hi(0x00000000),gr4
+	setlo		%lo(0x00000000),gr4		; physical address
+	setlos		#xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr5
+	or		gr4,gr5,gr5
+
+	movsg		cxnr,gr13
+	or		gr4,gr13,gr4
+
+	movgs		gr4,iamlr1			; mapped from real address 0
+	movgs		gr5,iampr1			; cached kernel memory at 0x00000000
+2:
+#endif
+
+	lddi		@(gr11,#0),gr4 ; hsr0, psr
+	lddi		@(gr11,#8),gr6 ; isr, lr
+	movgs		gr4,hsr0
+	bar
+
+#ifdef CONFIG_MMU
+	sethi.p		%hi(1f),gr11
+	setlo		%lo(1f),gr11
+	jmpl		@(gr11,gr0)
+1:
+	movgs		gr0,iampr1 	; get rid of temporary mapping
+#endif
+	movgs		gr5,psr
+	movgs		gr6,isr
+
+	#----------------------------------------------------
+	# unlock the icache which was locked before going to sleep
+	#----------------------------------------------------
+	li		__icache_lock_start,gr3
+	li		__icache_lock_end,gr4
+1:	icul		gr3
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	#----------------------------------------------------
+	# back to business as usual
+	#----------------------------------------------------
+	jmpl		@(gr7,gr0)		;
+
+#endif /* CONFIG_PM */
+
+###############################################################################
+#
+# CPU core sleep mode routine
+#
+###############################################################################
+	.globl		frv_cpu_core_sleep
+        .type		frv_cpu_core_sleep,@function
+frv_cpu_core_sleep:
+
+	# Preload into icache.
+	li		#__core_sleep_icache_lock_start,gr3
+	li		#__core_sleep_icache_lock_end,gr4
+
+1:	icpl		gr3,gr0,#1
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	bra	__core_sleep_icache_lock_start
+
+	.balign L1_CACHE_BYTES
+__core_sleep_icache_lock_start:
+
+	# (1) Set the PSR register ET bit to 0 to disable interrupts.
+	movsg		psr,gr8
+	andi.p		gr8,#~(PSR_PIL),gr8
+	andi		gr8,#~(PSR_ET),gr4
+	movgs		gr4,psr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	# (2) Set '1' to all bits in the MASK register of the interrupt
+	#     controller and mask interrupts.
+	sethi.p		%hi(__addr_MASK),gr9
+	setlo		%lo(__addr_MASK),gr9
+	sethi.p		%hi(0xffff0000),gr4
+	setlo		%lo(0xffff0000),gr4
+	ldi		@(gr9,#0),gr10
+	sti		gr4,@(gr9,#0)
+#endif
+	# (3) Flush all data in the cache using the DCEF instruction.
+	dcef		@(gr0,gr0),#1
+
+	# (4) Execute the memory barrier instruction
+	membar
+
+	# (5) Set the GPIO register so that the IRQ[3:0] pins become valid, as required.
+	# (6) Set the clock mode (CLKC register) as required.
+	#     - At this time, also set the CLKC register P0 bit.
+	# (7) Set the HSR0 register PDM field to  001 .
+	movsg		hsr0,gr4
+	ori		gr4,HSR0_PDM_CORE_SLEEP,gr4
+	movgs		gr4,hsr0
+
+	# (8) Execute NOP 32 times.
+	.rept		32
+	nop
+	.endr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	# (9) Release the interrupt mask setting of the MASK register of the
+	#     interrupt controller if necessary.
+	sti		gr10,@(gr9,#0)
+	membar
+#endif
+
+	# (10) Set the PSR register ET bit to 1 to enable interrupts.
+	movgs		gr8,psr
+
+__core_sleep_icache_lock_end:
+
+	# Unlock from icache
+	li	__core_sleep_icache_lock_start,gr3
+	li	__core_sleep_icache_lock_end,gr4
+1:	icul		gr3
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	bralr
+
+	.size		frv_cpu_core_sleep, .-frv_cpu_core_sleep
diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S
new file mode 100644
index 00000000..b0666867
--- /dev/null
+++ b/arch/frv/kernel/switch_to.S
@@ -0,0 +1,489 @@
+###############################################################################
+#
+# switch_to.S: context switch operation
+#
+# Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+#
+###############################################################################
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/processor.h>
+#include <asm/registers.h>
+#include <asm/spr-regs.h>
+
+.macro LEDS val
+	setlos		#~\val,gr27
+	st		gr27,@(gr30,gr0)
+	membar
+	dcf		@(gr30,gr0)
+.endm
+
+	.section	.sdata
+	.balign		8
+
+	# address of frame 0 (userspace) on current kernel stack
+	.globl		__kernel_frame0_ptr
+__kernel_frame0_ptr:
+	.long		init_thread_union + THREAD_SIZE - FRV_FRAME0_SIZE
+
+	# address of current task
+	.globl		__kernel_current_task
+__kernel_current_task:
+	.long		init_task
+
+	.section	.text
+	.balign		4
+
+###############################################################################
+#
+# struct task_struct *__switch_to(struct thread_struct *prev_thread,
+#				  struct thread_struct *next_thread,
+#				  struct task_struct *prev)
+#
+###############################################################################
+	.globl		__switch_to
+__switch_to:
+	# save outgoing process's context
+	sethi.p		%hi(__switch_back),gr13
+	setlo		%lo(__switch_back),gr13
+	movsg		lr,gr12
+
+	stdi		gr28,@(gr8,#__THREAD_FRAME)
+	sti		sp  ,@(gr8,#__THREAD_SP)
+	sti		fp  ,@(gr8,#__THREAD_FP)
+	stdi		gr12,@(gr8,#__THREAD_LR)
+	stdi		gr16,@(gr8,#__THREAD_GR(16))
+	stdi		gr18,@(gr8,#__THREAD_GR(18))
+	stdi		gr20,@(gr8,#__THREAD_GR(20))
+	stdi		gr22,@(gr8,#__THREAD_GR(22))
+	stdi		gr24,@(gr8,#__THREAD_GR(24))
+	stdi.p		gr26,@(gr8,#__THREAD_GR(26))
+
+	or		gr8,gr8,gr22
+	ldi.p		@(gr8,#__THREAD_USER),gr8
+	call		save_user_regs
+	or		gr22,gr22,gr8
+	
+	# retrieve the new context
+	sethi.p		%hi(__kernel_frame0_ptr),gr6
+	setlo		%lo(__kernel_frame0_ptr),gr6
+	movsg		psr,gr4
+
+	lddi.p		@(gr9,#__THREAD_FRAME),gr10
+	or		gr10,gr10,gr27		; save prev for the return value
+
+	ldi		@(gr11,#4),gr19		; get new_current->thread_info
+
+	lddi		@(gr9,#__THREAD_SP),gr12
+	ldi		@(gr9,#__THREAD_LR),gr14
+	ldi		@(gr9,#__THREAD_PC),gr18
+	ldi.p		@(gr9,#__THREAD_FRAME0),gr7
+
+	# actually switch kernel contexts with ordinary exceptions disabled
+	andi		gr4,#~PSR_ET,gr5
+	movgs		gr5,psr
+
+	or.p		gr10,gr0,gr28		; set __frame
+	or		gr11,gr0,gr29		; set __current
+	or.p		gr12,gr0,sp
+	or		gr13,gr0,fp
+	or		gr19,gr0,gr15		; set __current_thread_info
+
+	sti		gr7,@(gr6,#0)		; set __kernel_frame0_ptr
+	sti		gr29,@(gr6,#4)		; set __kernel_current_task
+
+	movgs		gr14,lr
+	bar
+
+	# jump to __switch_back or ret_from_fork as appropriate
+	# - move prev to GR8
+	movgs		gr4,psr
+	jmpl.p		@(gr18,gr0)
+	or		gr27,gr27,gr8
+
+###############################################################################
+#
+# restore incoming process's context
+# - on entry:
+#   - SP, FP, LR, GR15, GR28 and GR29 will have been set up appropriately
+#   - GR8 will point to the outgoing task_struct
+#   - GR9 will point to the incoming thread_struct
+#
+###############################################################################
+__switch_back:
+	lddi		@(gr9,#__THREAD_GR(16)),gr16
+	lddi		@(gr9,#__THREAD_GR(18)),gr18
+	lddi		@(gr9,#__THREAD_GR(20)),gr20
+	lddi		@(gr9,#__THREAD_GR(22)),gr22
+	lddi		@(gr9,#__THREAD_GR(24)),gr24
+	lddi		@(gr9,#__THREAD_GR(26)),gr26
+
+	# fall through into restore_user_regs()
+	ldi.p		@(gr9,#__THREAD_USER),gr8
+	or		gr8,gr8,gr9
+
+###############################################################################
+#
+# restore extra general regs and FP/Media regs
+# - void *restore_user_regs(const struct user_context *target, void *retval)
+# - on entry:
+#   - GR8 will point to the user context to swap in
+#   - GR9 will contain the value to be returned in GR8 (prev task on context switch)
+#
+###############################################################################
+	.globl		restore_user_regs
+restore_user_regs:
+	movsg		hsr0,gr6
+	ori		gr6,#HSR0_GRHE|HSR0_FRLE|HSR0_FRHE,gr6
+	movgs		gr6,hsr0
+	movsg		hsr0,gr6
+
+	movsg		psr,gr7
+	ori		gr7,#PSR_EF|PSR_EM,gr7
+	movgs		gr7,psr
+	movsg		psr,gr7
+	srli		gr7,#24,gr7
+	bar
+
+	lddi		@(gr8,#__FPMEDIA_MSR(0)),gr4
+
+	movgs		gr4,msr0
+	movgs		gr5,msr1
+
+	lddfi		@(gr8,#__FPMEDIA_ACC(0)),fr16
+	lddfi		@(gr8,#__FPMEDIA_ACC(2)),fr18
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(0)),fr20
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(1)),fr21
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(2)),fr22
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(3)),fr23
+
+	mwtacc		fr16,acc0
+	mwtacc		fr17,acc1
+	mwtacc		fr18,acc2
+	mwtacc		fr19,acc3
+	mwtaccg		fr20,accg0
+	mwtaccg		fr21,accg1
+	mwtaccg		fr22,accg2
+	mwtaccg		fr23,accg3
+
+	# some CPUs have extra ACCx and ACCGx regs and maybe FSRx regs
+	subicc.p	gr7,#0x50,gr0,icc0
+	subicc		gr7,#0x31,gr0,icc1
+	beq		icc0,#0,__restore_acc_fr451
+	beq		icc1,#0,__restore_acc_fr555
+__restore_acc_cont:
+
+	# some CPU's have GR32-GR63
+	setlos		#HSR0_FRHE,gr4
+	andcc		gr6,gr4,gr0,icc0
+	beq		icc0,#1,__restore_skip_gr32_gr63
+
+	lddi		@(gr8,#__INT_GR(32)),gr32
+	lddi		@(gr8,#__INT_GR(34)),gr34
+	lddi		@(gr8,#__INT_GR(36)),gr36
+	lddi		@(gr8,#__INT_GR(38)),gr38
+	lddi		@(gr8,#__INT_GR(40)),gr40
+	lddi		@(gr8,#__INT_GR(42)),gr42
+	lddi		@(gr8,#__INT_GR(44)),gr44
+	lddi		@(gr8,#__INT_GR(46)),gr46
+	lddi		@(gr8,#__INT_GR(48)),gr48
+	lddi		@(gr8,#__INT_GR(50)),gr50
+	lddi		@(gr8,#__INT_GR(52)),gr52
+	lddi		@(gr8,#__INT_GR(54)),gr54
+	lddi		@(gr8,#__INT_GR(56)),gr56
+	lddi		@(gr8,#__INT_GR(58)),gr58
+	lddi		@(gr8,#__INT_GR(60)),gr60
+	lddi		@(gr8,#__INT_GR(62)),gr62
+__restore_skip_gr32_gr63:
+
+	# all CPU's have FR0-FR31
+	lddfi		@(gr8,#__FPMEDIA_FR( 0)),fr0
+	lddfi		@(gr8,#__FPMEDIA_FR( 2)),fr2
+	lddfi		@(gr8,#__FPMEDIA_FR( 4)),fr4
+	lddfi		@(gr8,#__FPMEDIA_FR( 6)),fr6
+	lddfi		@(gr8,#__FPMEDIA_FR( 8)),fr8
+	lddfi		@(gr8,#__FPMEDIA_FR(10)),fr10
+	lddfi		@(gr8,#__FPMEDIA_FR(12)),fr12
+	lddfi		@(gr8,#__FPMEDIA_FR(14)),fr14
+	lddfi		@(gr8,#__FPMEDIA_FR(16)),fr16
+	lddfi		@(gr8,#__FPMEDIA_FR(18)),fr18
+	lddfi		@(gr8,#__FPMEDIA_FR(20)),fr20
+	lddfi		@(gr8,#__FPMEDIA_FR(22)),fr22
+	lddfi		@(gr8,#__FPMEDIA_FR(24)),fr24
+	lddfi		@(gr8,#__FPMEDIA_FR(26)),fr26
+	lddfi		@(gr8,#__FPMEDIA_FR(28)),fr28
+	lddfi.p		@(gr8,#__FPMEDIA_FR(30)),fr30
+
+	# some CPU's have FR32-FR63
+	setlos		#HSR0_FRHE,gr4
+	andcc		gr6,gr4,gr0,icc0
+	beq		icc0,#1,__restore_skip_fr32_fr63
+
+	lddfi		@(gr8,#__FPMEDIA_FR(32)),fr32
+	lddfi		@(gr8,#__FPMEDIA_FR(34)),fr34
+	lddfi		@(gr8,#__FPMEDIA_FR(36)),fr36
+	lddfi		@(gr8,#__FPMEDIA_FR(38)),fr38
+	lddfi		@(gr8,#__FPMEDIA_FR(40)),fr40
+	lddfi		@(gr8,#__FPMEDIA_FR(42)),fr42
+	lddfi		@(gr8,#__FPMEDIA_FR(44)),fr44
+	lddfi		@(gr8,#__FPMEDIA_FR(46)),fr46
+	lddfi		@(gr8,#__FPMEDIA_FR(48)),fr48
+	lddfi		@(gr8,#__FPMEDIA_FR(50)),fr50
+	lddfi		@(gr8,#__FPMEDIA_FR(52)),fr52
+	lddfi		@(gr8,#__FPMEDIA_FR(54)),fr54
+	lddfi		@(gr8,#__FPMEDIA_FR(56)),fr56
+	lddfi		@(gr8,#__FPMEDIA_FR(58)),fr58
+	lddfi		@(gr8,#__FPMEDIA_FR(60)),fr60
+	lddfi		@(gr8,#__FPMEDIA_FR(62)),fr62
+__restore_skip_fr32_fr63:
+
+	lddi		@(gr8,#__FPMEDIA_FNER(0)),gr4
+	movsg		fner0,gr4
+	movsg		fner1,gr5
+	or.p		gr9,gr9,gr8
+	bralr
+
+	# the FR451 also has ACC8-11/ACCG8-11 regs (but not 4-7...)
+__restore_acc_fr451:
+	lddfi		@(gr8,#__FPMEDIA_ACC(4)),fr16
+	lddfi		@(gr8,#__FPMEDIA_ACC(6)),fr18
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(4)),fr20
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(5)),fr21
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(6)),fr22
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(7)),fr23
+
+	mwtacc		fr16,acc8
+	mwtacc		fr17,acc9
+	mwtacc		fr18,acc10
+	mwtacc		fr19,acc11
+	mwtaccg		fr20,accg8
+	mwtaccg		fr21,accg9
+	mwtaccg		fr22,accg10
+	mwtaccg		fr23,accg11
+	bra		__restore_acc_cont
+
+	# the FR555 also has ACC4-7/ACCG4-7 regs and an FSR0 reg
+__restore_acc_fr555:
+	lddfi		@(gr8,#__FPMEDIA_ACC(4)),fr16
+	lddfi		@(gr8,#__FPMEDIA_ACC(6)),fr18
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(4)),fr20
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(5)),fr21
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(6)),fr22
+	ldbfi		@(gr8,#__FPMEDIA_ACCG(7)),fr23
+
+	mnop.p
+	mwtacc		fr16,acc4
+	mnop.p
+	mwtacc		fr17,acc5
+	mnop.p
+	mwtacc		fr18,acc6
+	mnop.p
+	mwtacc		fr19,acc7
+	mnop.p
+	mwtaccg		fr20,accg4
+	mnop.p
+	mwtaccg		fr21,accg5
+	mnop.p
+	mwtaccg		fr22,accg6
+	mnop.p
+	mwtaccg		fr23,accg7
+
+	ldi		@(gr8,#__FPMEDIA_FSR(0)),gr4
+	movgs		gr4,fsr0
+
+	bra		__restore_acc_cont
+
+
+###############################################################################
+#
+# save extra general regs and FP/Media regs
+# - void save_user_regs(struct user_context *target)
+#
+###############################################################################
+	.globl		save_user_regs
+save_user_regs:
+	movsg		hsr0,gr6
+	ori		gr6,#HSR0_GRHE|HSR0_FRLE|HSR0_FRHE,gr6
+	movgs		gr6,hsr0
+	movsg		hsr0,gr6
+
+	movsg		psr,gr7
+	ori		gr7,#PSR_EF|PSR_EM,gr7
+	movgs		gr7,psr
+	movsg		psr,gr7
+	srli		gr7,#24,gr7
+	bar
+
+	movsg		fner0,gr4
+	movsg		fner1,gr5
+	stdi.p		gr4,@(gr8,#__FPMEDIA_FNER(0))
+
+	# some CPU's have GR32-GR63
+	setlos		#HSR0_GRHE,gr4
+	andcc		gr6,gr4,gr0,icc0
+	beq		icc0,#1,__save_skip_gr32_gr63
+
+	stdi		gr32,@(gr8,#__INT_GR(32))
+	stdi		gr34,@(gr8,#__INT_GR(34))
+	stdi		gr36,@(gr8,#__INT_GR(36))
+	stdi		gr38,@(gr8,#__INT_GR(38))
+	stdi		gr40,@(gr8,#__INT_GR(40))
+	stdi		gr42,@(gr8,#__INT_GR(42))
+	stdi		gr44,@(gr8,#__INT_GR(44))
+	stdi		gr46,@(gr8,#__INT_GR(46))
+	stdi		gr48,@(gr8,#__INT_GR(48))
+	stdi		gr50,@(gr8,#__INT_GR(50))
+	stdi		gr52,@(gr8,#__INT_GR(52))
+	stdi		gr54,@(gr8,#__INT_GR(54))
+	stdi		gr56,@(gr8,#__INT_GR(56))
+	stdi		gr58,@(gr8,#__INT_GR(58))
+	stdi		gr60,@(gr8,#__INT_GR(60))
+	stdi		gr62,@(gr8,#__INT_GR(62))
+__save_skip_gr32_gr63:
+
+	# all CPU's have FR0-FR31
+	stdfi		fr0 ,@(gr8,#__FPMEDIA_FR( 0))
+	stdfi		fr2 ,@(gr8,#__FPMEDIA_FR( 2))
+	stdfi		fr4 ,@(gr8,#__FPMEDIA_FR( 4))
+	stdfi		fr6 ,@(gr8,#__FPMEDIA_FR( 6))
+	stdfi		fr8 ,@(gr8,#__FPMEDIA_FR( 8))
+	stdfi		fr10,@(gr8,#__FPMEDIA_FR(10))
+	stdfi		fr12,@(gr8,#__FPMEDIA_FR(12))
+	stdfi		fr14,@(gr8,#__FPMEDIA_FR(14))
+	stdfi		fr16,@(gr8,#__FPMEDIA_FR(16))
+	stdfi		fr18,@(gr8,#__FPMEDIA_FR(18))
+	stdfi		fr20,@(gr8,#__FPMEDIA_FR(20))
+	stdfi		fr22,@(gr8,#__FPMEDIA_FR(22))
+	stdfi		fr24,@(gr8,#__FPMEDIA_FR(24))
+	stdfi		fr26,@(gr8,#__FPMEDIA_FR(26))
+	stdfi		fr28,@(gr8,#__FPMEDIA_FR(28))
+	stdfi.p		fr30,@(gr8,#__FPMEDIA_FR(30))
+
+	# some CPU's have FR32-FR63
+	setlos		#HSR0_FRHE,gr4
+	andcc		gr6,gr4,gr0,icc0
+	beq		icc0,#1,__save_skip_fr32_fr63
+
+	stdfi		fr32,@(gr8,#__FPMEDIA_FR(32))
+	stdfi		fr34,@(gr8,#__FPMEDIA_FR(34))
+	stdfi		fr36,@(gr8,#__FPMEDIA_FR(36))
+	stdfi		fr38,@(gr8,#__FPMEDIA_FR(38))
+	stdfi		fr40,@(gr8,#__FPMEDIA_FR(40))
+	stdfi		fr42,@(gr8,#__FPMEDIA_FR(42))
+	stdfi		fr44,@(gr8,#__FPMEDIA_FR(44))
+	stdfi		fr46,@(gr8,#__FPMEDIA_FR(46))
+	stdfi		fr48,@(gr8,#__FPMEDIA_FR(48))
+	stdfi		fr50,@(gr8,#__FPMEDIA_FR(50))
+	stdfi		fr52,@(gr8,#__FPMEDIA_FR(52))
+	stdfi		fr54,@(gr8,#__FPMEDIA_FR(54))
+	stdfi		fr56,@(gr8,#__FPMEDIA_FR(56))
+	stdfi		fr58,@(gr8,#__FPMEDIA_FR(58))
+	stdfi		fr60,@(gr8,#__FPMEDIA_FR(60))
+	stdfi		fr62,@(gr8,#__FPMEDIA_FR(62))
+__save_skip_fr32_fr63:
+
+	mrdacc		acc0 ,fr4
+	mrdacc		acc1 ,fr5
+
+	stdfi.p		fr4 ,@(gr8,#__FPMEDIA_ACC(0))
+
+	mrdacc		acc2 ,fr6
+	mrdacc		acc3 ,fr7
+
+	stdfi.p		fr6 ,@(gr8,#__FPMEDIA_ACC(2))
+
+	mrdaccg		accg0,fr4
+	stbfi.p		fr4 ,@(gr8,#__FPMEDIA_ACCG(0))
+
+	mrdaccg		accg1,fr5
+	stbfi.p		fr5 ,@(gr8,#__FPMEDIA_ACCG(1))
+
+	mrdaccg		accg2,fr6
+	stbfi.p		fr6 ,@(gr8,#__FPMEDIA_ACCG(2))
+
+	mrdaccg		accg3,fr7
+	stbfi		fr7 ,@(gr8,#__FPMEDIA_ACCG(3))
+
+	movsg		msr0 ,gr4
+	movsg		msr1 ,gr5
+
+	stdi		gr4 ,@(gr8,#__FPMEDIA_MSR(0))
+
+	# some CPUs have extra ACCx and ACCGx regs and maybe FSRx regs
+	subicc.p	gr7,#0x50,gr0,icc0
+	subicc		gr7,#0x31,gr0,icc1
+	beq		icc0,#0,__save_acc_fr451
+	beq		icc1,#0,__save_acc_fr555
+__save_acc_cont:
+
+	lddfi		@(gr8,#__FPMEDIA_FR(4)),fr4
+	lddfi.p		@(gr8,#__FPMEDIA_FR(6)),fr6
+	bralr
+
+	# the FR451 also has ACC8-11/ACCG8-11 regs (but not 4-7...)
+__save_acc_fr451:
+	mrdacc		acc8 ,fr4
+	mrdacc		acc9 ,fr5
+
+	stdfi.p		fr4 ,@(gr8,#__FPMEDIA_ACC(4))
+
+	mrdacc		acc10,fr6
+	mrdacc		acc11,fr7
+
+	stdfi.p		fr6 ,@(gr8,#__FPMEDIA_ACC(6))
+
+	mrdaccg		accg8,fr4
+	stbfi.p		fr4 ,@(gr8,#__FPMEDIA_ACCG(4))
+
+	mrdaccg		accg9,fr5
+	stbfi.p		fr5 ,@(gr8,#__FPMEDIA_ACCG(5))
+
+	mrdaccg		accg10,fr6
+	stbfi.p		fr6 ,@(gr8,#__FPMEDIA_ACCG(6))
+
+	mrdaccg		accg11,fr7
+	stbfi		fr7 ,@(gr8,#__FPMEDIA_ACCG(7))
+	bra		__save_acc_cont
+
+	# the FR555 also has ACC4-7/ACCG4-7 regs and an FSR0 reg
+__save_acc_fr555:
+	mnop.p
+	mrdacc		acc4 ,fr4
+	mnop.p
+	mrdacc		acc5 ,fr5
+
+	stdfi		fr4 ,@(gr8,#__FPMEDIA_ACC(4))
+
+	mnop.p
+	mrdacc		acc6 ,fr6
+	mnop.p
+	mrdacc		acc7 ,fr7
+
+	stdfi		fr6 ,@(gr8,#__FPMEDIA_ACC(6))
+
+	mnop.p
+	mrdaccg		accg4,fr4
+	stbfi		fr4 ,@(gr8,#__FPMEDIA_ACCG(4))
+
+	mnop.p
+	mrdaccg		accg5,fr5
+	stbfi		fr5 ,@(gr8,#__FPMEDIA_ACCG(5))
+
+	mnop.p
+	mrdaccg		accg6,fr6
+	stbfi		fr6 ,@(gr8,#__FPMEDIA_ACCG(6))
+
+	mnop.p
+	mrdaccg		accg7,fr7
+	stbfi		fr7 ,@(gr8,#__FPMEDIA_ACCG(7))
+
+	movsg		fsr0 ,gr4
+	sti		gr4 ,@(gr8,#__FPMEDIA_FSR(0))
+	bra		__save_acc_cont
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
new file mode 100644
index 00000000..9c498082
--- /dev/null
+++ b/arch/frv/kernel/sys_frv.c
@@ -0,0 +1,44 @@
+/* sys_frv.c: FRV arch-specific syscall wrappers
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/sys_m68k.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/syscalls.h>
+#include <linux/ipc.h>
+
+#include <asm/setup.h>
+#include <asm/uaccess.h>
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			  unsigned long prot, unsigned long flags,
+			  unsigned long fd, unsigned long pgoff)
+{
+	/* As with sparc32, make sure the shift for mmap2 is constant
+	   (12), no matter what PAGE_SIZE we have.... */
+
+	/* But unlike sparc32, don't just silently break if we're
+	   trying to map something we can't */
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+		return -EINVAL;
+
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      pgoff >> (PAGE_SHIFT - 12));
+}
diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c
new file mode 100644
index 00000000..6c155d69
--- /dev/null
+++ b/arch/frv/kernel/sysctl.c
@@ -0,0 +1,221 @@
+/* sysctl.c: implementation of /proc/sys files relating to FRV specifically
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+
+static const char frv_cache_wback[] = "wback";
+static const char frv_cache_wthru[] = "wthru";
+
+static void frv_change_dcache_mode(unsigned long newmode)
+{
+	unsigned long flags, hsr0;
+
+	local_irq_save(flags);
+
+	hsr0 = __get_HSR(0);
+	hsr0 &= ~HSR0_DCE;
+	__set_HSR(0, hsr0);
+
+	asm volatile("	dcef	@(gr0,gr0),#1	\n"
+		     "	membar			\n"
+		     : : : "memory"
+		     );
+
+	hsr0 = (hsr0 & ~HSR0_CBM) | newmode;
+	__set_HSR(0, hsr0);
+	hsr0 |= HSR0_DCE;
+	__set_HSR(0, hsr0);
+
+	local_irq_restore(flags);
+
+	//printk("HSR0 now %08lx\n", hsr0);
+}
+
+/*****************************************************************************/
+/*
+ * handle requests to dynamically switch the write caching mode delivered by /proc
+ */
+static int procctl_frv_cachemode(ctl_table *table, int write,
+				 void __user *buffer, size_t *lenp,
+				 loff_t *ppos)
+{
+	unsigned long hsr0;
+	char buff[8];
+	int len;
+
+	len = *lenp;
+
+	if (write) {
+		/* potential state change */
+		if (len <= 1 || len > sizeof(buff) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buff, buffer, len) != 0)
+			return -EFAULT;
+
+		if (buff[len - 1] == '\n')
+			buff[len - 1] = '\0';
+		else
+			buff[len] = '\0';
+
+		if (strcmp(buff, frv_cache_wback) == 0) {
+			/* switch dcache into write-back mode */
+			frv_change_dcache_mode(HSR0_CBM_COPY_BACK);
+			return 0;
+		}
+
+		if (strcmp(buff, frv_cache_wthru) == 0) {
+			/* switch dcache into write-through mode */
+			frv_change_dcache_mode(HSR0_CBM_WRITE_THRU);
+			return 0;
+		}
+
+		return -EINVAL;
+	}
+
+	/* read the state */
+	if (*ppos > 0) {
+		*lenp = 0;
+		return 0;
+	}
+
+	hsr0 = __get_HSR(0);
+	switch (hsr0 & HSR0_CBM) {
+	case HSR0_CBM_WRITE_THRU:
+		memcpy(buff, frv_cache_wthru, sizeof(frv_cache_wthru) - 1);
+		buff[sizeof(frv_cache_wthru) - 1] = '\n';
+		len = sizeof(frv_cache_wthru);
+		break;
+	default:
+		memcpy(buff, frv_cache_wback, sizeof(frv_cache_wback) - 1);
+		buff[sizeof(frv_cache_wback) - 1] = '\n';
+		len = sizeof(frv_cache_wback);
+		break;
+	}
+
+	if (len > *lenp)
+		len = *lenp;
+
+	if (copy_to_user(buffer, buff, len) != 0)
+		return -EFAULT;
+
+	*lenp = len;
+	*ppos = len;
+	return 0;
+
+} /* end procctl_frv_cachemode() */
+
+/*****************************************************************************/
+/*
+ * permit the mm_struct the nominated process is using have its MMU context ID pinned
+ */
+#ifdef CONFIG_MMU
+static int procctl_frv_pin_cxnr(ctl_table *table, int write,
+				void __user *buffer, size_t *lenp,
+				loff_t *ppos)
+{
+	pid_t pid;
+	char buff[16], *p;
+	int len;
+
+	len = *lenp;
+
+	if (write) {
+		/* potential state change */
+		if (len <= 1 || len > sizeof(buff) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buff, buffer, len) != 0)
+			return -EFAULT;
+
+		if (buff[len - 1] == '\n')
+			buff[len - 1] = '\0';
+		else
+			buff[len] = '\0';
+
+		pid = simple_strtoul(buff, &p, 10);
+		if (*p)
+			return -EINVAL;
+
+		return cxn_pin_by_pid(pid);
+	}
+
+	/* read the currently pinned CXN */
+	if (*ppos > 0) {
+		*lenp = 0;
+		return 0;
+	}
+
+	len = snprintf(buff, sizeof(buff), "%d\n", cxn_pinned);
+	if (len > *lenp)
+		len = *lenp;
+
+	if (copy_to_user(buffer, buff, len) != 0)
+		return -EFAULT;
+
+	*lenp = len;
+	*ppos = len;
+	return 0;
+
+} /* end procctl_frv_pin_cxnr() */
+#endif
+
+/*
+ * FR-V specific sysctls
+ */
+static struct ctl_table frv_table[] =
+{
+	{
+		.procname 	= "cache-mode",
+		.data		= NULL,
+		.maxlen		= 0,
+		.mode		= 0644,
+		.proc_handler	= procctl_frv_cachemode,
+	},
+#ifdef CONFIG_MMU
+	{
+		.procname	= "pin-cxnr",
+		.data		= NULL,
+		.maxlen		= 0,
+		.mode		= 0644,
+		.proc_handler	= procctl_frv_pin_cxnr
+	},
+#endif
+	{}
+};
+
+/*
+ * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6
+ * when all the PM interfaces exist nicely.
+ */
+static struct ctl_table frv_dir_table[] =
+{
+	{
+		.procname	= "frv",
+		.mode 		= 0555,
+		.child		= frv_table
+	},
+	{}
+};
+
+/*
+ * Initialize power interface
+ */
+static int __init frv_sysctl_init(void)
+{
+	register_sysctl_table(frv_dir_table);
+	return 0;
+}
+
+__initcall(frv_sysctl_init);
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
new file mode 100644
index 00000000..b457de49
--- /dev/null
+++ b/arch/frv/kernel/time.c
@@ -0,0 +1,123 @@
+/* time.c: FRV arch-specific time handling
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/time.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/profile.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+
+#include <asm/io.h>
+#include <asm/timer-regs.h>
+#include <asm/mb-regs.h>
+#include <asm/mb86943a.h>
+
+#include <linux/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+unsigned long __nongprelbss __clkin_clock_speed_HZ;
+unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
+unsigned long __nongprelbss __res_bus_clock_speed_HZ;
+unsigned long __nongprelbss __sdram_clock_speed_HZ;
+unsigned long __nongprelbss __core_bus_clock_speed_HZ;
+unsigned long __nongprelbss __core_clock_speed_HZ;
+unsigned long __nongprelbss __dsu_clock_speed_HZ;
+unsigned long __nongprelbss __serial_clock_speed_HZ;
+unsigned long __delay_loops_MHz;
+
+static irqreturn_t timer_interrupt(int irq, void *dummy);
+
+static struct irqaction timer_irq  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED,
+	.name = "timer",
+};
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "xtime_update()" routine every clocktick
+ */
+static irqreturn_t timer_interrupt(int irq, void *dummy)
+{
+	profile_tick(CPU_PROFILING);
+
+	xtime_update(1);
+
+#ifdef CONFIG_HEARTBEAT
+	static unsigned short n;
+	n++;
+	__set_LEDS(n);
+#endif /* CONFIG_HEARTBEAT */
+
+	update_process_times(user_mode(get_irq_regs()));
+
+	return IRQ_HANDLED;
+}
+
+void time_divisor_init(void)
+{
+	unsigned short base, pre, prediv;
+
+	/* set the scheduling timer going */
+	pre = 1;
+	prediv = 4;
+	base = __res_bus_clock_speed_HZ / pre / HZ / (1 << prediv);
+
+	__set_TPRV(pre);
+	__set_TxCKSL_DATA(0, prediv);
+	__set_TCTR(TCTR_SC_CTR0 | TCTR_RL_RW_LH8 | TCTR_MODE_2);
+	__set_TCSR_DATA(0, base & 0xff);
+	__set_TCSR_DATA(0, base >> 8);
+}
+
+
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned int year, mon, day, hour, min, sec;
+
+	extern void arch_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+
+	/* FIX by dqg : Set to zero for platforms that don't have tod */
+	/* without this time is undefined and can overflow time_t, causing  */
+	/* very strange errors */
+	year = 1980;
+	mon = day = 1;
+	hour = min = sec = 0;
+	arch_gettod (&year, &mon, &day, &hour, &min, &sec);
+
+	if ((year += 1900) < 1970)
+		year += 100;
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
+}
+
+void time_init(void)
+{
+	/* install scheduling interrupt handler */
+	setup_irq(IRQ_CPU_TIMER0, &timer_irq);
+
+	time_divisor_init();
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	return jiffies_64 * (1000000000 / HZ);
+}
diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c
new file mode 100644
index 00000000..5cfd1420
--- /dev/null
+++ b/arch/frv/kernel/traps.c
@@ -0,0 +1,658 @@
+/* traps.c: high-level exception handler for FR-V
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/user.h>
+#include <linux/string.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/setup.h>
+#include <asm/fpu.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/siginfo.h>
+#include <asm/unaligned.h>
+
+void show_backtrace(struct pt_regs *, unsigned long);
+
+extern asmlinkage void __break_hijack_kernel_event(void);
+
+/*****************************************************************************/
+/*
+ * instruction access error
+ */
+asmlinkage void insn_access_error(unsigned long esfr1, unsigned long epcr0, unsigned long esr0)
+{
+	siginfo_t info;
+
+	die_if_kernel("-- Insn Access Error --\n"
+		      "EPCR0 : %08lx\n"
+		      "ESR0  : %08lx\n",
+		      epcr0, esr0);
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= (void __user *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc);
+
+	force_sig_info(info.si_signo, &info, current);
+} /* end insn_access_error() */
+
+/*****************************************************************************/
+/*
+ * handler for:
+ * - illegal instruction
+ * - privileged instruction
+ * - unsupported trap
+ * - debug exceptions
+ */
+asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, unsigned long esr0)
+{
+	siginfo_t info;
+
+	die_if_kernel("-- Illegal Instruction --\n"
+		      "EPCR0 : %08lx\n"
+		      "ESR0  : %08lx\n"
+		      "ESFR1 : %08lx\n",
+		      epcr0, esr0, esfr1);
+
+	info.si_errno	= 0;
+	info.si_addr	= (void __user *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc);
+
+	switch (__frame->tbr & TBR_TT) {
+	case TBR_TT_ILLEGAL_INSTR:
+		info.si_signo	= SIGILL;
+		info.si_code	= ILL_ILLOPC;
+		break;
+	case TBR_TT_PRIV_INSTR:
+		info.si_signo	= SIGILL;
+		info.si_code	= ILL_PRVOPC;
+		break;
+	case TBR_TT_TRAP2 ... TBR_TT_TRAP126:
+		info.si_signo	= SIGILL;
+		info.si_code	= ILL_ILLTRP;
+		break;
+	/* GDB uses "tira gr0, #1" as a breakpoint instruction.  */
+	case TBR_TT_TRAP1:
+	case TBR_TT_BREAK:
+		info.si_signo	= SIGTRAP;
+		info.si_code	=
+			(__frame->__status & REG__STATUS_STEPPED) ? TRAP_TRACE : TRAP_BRKPT;
+		break;
+	}
+
+	force_sig_info(info.si_signo, &info, current);
+} /* end illegal_instruction() */
+
+/*****************************************************************************/
+/*
+ * handle atomic operations with errors
+ * - arguments in gr8, gr9, gr10
+ * - original memory value placed in gr5
+ * - replacement memory value placed in gr9
+ */
+asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0,
+				 unsigned long esr0)
+{
+	static DEFINE_SPINLOCK(atomic_op_lock);
+	unsigned long x, y, z;
+	unsigned long __user *p;
+	mm_segment_t oldfs;
+	siginfo_t info;
+	int ret;
+
+	y = 0;
+	z = 0;
+
+	oldfs = get_fs();
+	if (!user_mode(__frame))
+		set_fs(KERNEL_DS);
+
+	switch (__frame->tbr & TBR_TT) {
+		/* TIRA gr0,#120
+		 * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new)
+		 */
+	case TBR_TT_ATOMIC_CMPXCHG32:
+		p = (unsigned long __user *) __frame->gr8;
+		x = __frame->gr9;
+		y = __frame->gr10;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			if (z != x)
+				goto done;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (z != x)
+					goto done2;
+
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#121
+		 * u32 __atomic_kernel_xchg32(void *v, u32 new)
+		 */
+	case TBR_TT_ATOMIC_XCHG32:
+		p = (unsigned long __user *) __frame->gr8;
+		y = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#122
+		 * ulong __atomic_kernel_XOR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_XOR:
+		p = (unsigned long __user *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#123
+		 * ulong __atomic_kernel_OR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_OR:
+		p = (unsigned long __user *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#124
+		 * ulong __atomic_kernel_AND_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_AND:
+		p = (unsigned long __user *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x & z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#125
+		 * int __atomic_user_sub_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_SUB:
+		p = (unsigned long __user *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z - x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#126
+		 * int __atomic_user_add_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_ADD:
+		p = (unsigned long __user *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z + x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+	default:
+		BUG();
+	}
+
+done2:
+	spin_unlock_irq(&atomic_op_lock);
+done:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->gr5 = z;
+	__frame->gr9 = y;
+	return;
+
+error2:
+	spin_unlock_irq(&atomic_op_lock);
+error:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->pc -= 4;
+
+	die_if_kernel("-- Atomic Op Error --\n");
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= (void __user *) __frame->pc;
+
+	force_sig_info(info.si_signo, &info, current);
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+asmlinkage void media_exception(unsigned long msr0, unsigned long msr1)
+{
+	siginfo_t info;
+
+	die_if_kernel("-- Media Exception --\n"
+		      "MSR0 : %08lx\n"
+		      "MSR1 : %08lx\n",
+		      msr0, msr1);
+
+	info.si_signo	= SIGFPE;
+	info.si_code	= FPE_MDAOVF;
+	info.si_errno	= 0;
+	info.si_addr	= (void __user *) __frame->pc;
+
+	force_sig_info(info.si_signo, &info, current);
+} /* end media_exception() */
+
+/*****************************************************************************/
+/*
+ * instruction or data access exception
+ */
+asmlinkage void memory_access_exception(unsigned long esr0,
+					unsigned long ear0,
+					unsigned long epcr0)
+{
+	siginfo_t info;
+
+#ifdef CONFIG_MMU
+	unsigned long fixup;
+
+	fixup = search_exception_table(__frame->pc);
+	if (fixup) {
+		__frame->pc = fixup;
+		return;
+	}
+#endif
+
+	die_if_kernel("-- Memory Access Exception --\n"
+		      "ESR0  : %08lx\n"
+		      "EAR0  : %08lx\n"
+		      "EPCR0 : %08lx\n",
+		      esr0, ear0, epcr0);
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= NULL;
+
+	if ((esr0 & (ESRx_VALID | ESR0_EAV)) == (ESRx_VALID | ESR0_EAV))
+		info.si_addr = (void __user *) ear0;
+
+	force_sig_info(info.si_signo, &info, current);
+
+} /* end memory_access_exception() */
+
+/*****************************************************************************/
+/*
+ * data access error
+ * - double-word data load from CPU control area (0xFExxxxxx)
+ * - read performed on inactive or self-refreshing SDRAM
+ * - error notification from slave device
+ * - misaligned address
+ * - access to out of bounds memory region
+ * - user mode accessing privileged memory region
+ * - write to R/O memory region
+ */
+asmlinkage void data_access_error(unsigned long esfr1, unsigned long esr15, unsigned long ear15)
+{
+	siginfo_t info;
+
+	die_if_kernel("-- Data Access Error --\n"
+		      "ESR15 : %08lx\n"
+		      "EAR15 : %08lx\n",
+		      esr15, ear15);
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= (void __user *)
+		(((esr15 & (ESRx_VALID|ESR15_EAV)) == (ESRx_VALID|ESR15_EAV)) ? ear15 : 0);
+
+	force_sig_info(info.si_signo, &info, current);
+} /* end data_access_error() */
+
+/*****************************************************************************/
+/*
+ * data store error - should only happen if accessing inactive or self-refreshing SDRAM
+ */
+asmlinkage void data_store_error(unsigned long esfr1, unsigned long esr15)
+{
+	die_if_kernel("-- Data Store Error --\n"
+		      "ESR15 : %08lx\n",
+		      esr15);
+	BUG();
+} /* end data_store_error() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+asmlinkage void division_exception(unsigned long esfr1, unsigned long esr0, unsigned long isr)
+{
+	siginfo_t info;
+
+	die_if_kernel("-- Division Exception --\n"
+		      "ESR0 : %08lx\n"
+		      "ISR  : %08lx\n",
+		      esr0, isr);
+
+	info.si_signo	= SIGFPE;
+	info.si_code	= FPE_INTDIV;
+	info.si_errno	= 0;
+	info.si_addr	= (void __user *) __frame->pc;
+
+	force_sig_info(info.si_signo, &info, current);
+} /* end division_exception() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+asmlinkage void compound_exception(unsigned long esfr1,
+				   unsigned long esr0, unsigned long esr14, unsigned long esr15,
+				   unsigned long msr0, unsigned long msr1)
+{
+	die_if_kernel("-- Compound Exception --\n"
+		      "ESR0  : %08lx\n"
+		      "ESR15 : %08lx\n"
+		      "ESR15 : %08lx\n"
+		      "MSR0  : %08lx\n"
+		      "MSR1  : %08lx\n",
+		      esr0, esr14, esr15, msr0, msr1);
+	BUG();
+} /* end compound_exception() */
+
+/*****************************************************************************/
+/*
+ * The architecture-independent backtrace generator
+ */
+void dump_stack(void)
+{
+	show_stack(NULL, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+}
+
+void show_trace_task(struct task_struct *tsk)
+{
+	printk("CONTEXT: stack=0x%lx frame=0x%p LR=0x%lx RET=0x%lx\n",
+	       tsk->thread.sp, tsk->thread.frame, tsk->thread.lr, tsk->thread.sched_lr);
+}
+
+static const char *regnames[] = {
+	"PSR ", "ISR ", "CCR ", "CCCR",
+	"LR  ", "LCR ", "PC  ", "_stt",
+	"sys ", "GR8*", "GNE0", "GNE1",
+	"IACH", "IACL",
+	"TBR ", "SP  ", "FP  ", "GR3 ",
+	"GR4 ", "GR5 ", "GR6 ", "GR7 ",
+	"GR8 ", "GR9 ", "GR10", "GR11",
+	"GR12", "GR13", "GR14", "GR15",
+	"GR16", "GR17", "GR18", "GR19",
+	"GR20", "GR21", "GR22", "GR23",
+	"GR24", "GR25", "GR26", "GR27",
+	"EFRM", "CURR", "GR30", "BFRM"
+};
+
+void show_regs(struct pt_regs *regs)
+{
+	unsigned long *reg;
+	int loop;
+
+	printk("\n");
+
+	printk("Frame: @%08lx [%s]\n",
+	       (unsigned long) regs,
+	       regs->psr & PSR_S ? "kernel" : "user");
+
+	reg = (unsigned long *) regs;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
+
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
+			printk("\n");
+		else
+			printk(" | ");
+	}
+
+	printk("Process %s (pid: %d)\n", current->comm, current->pid);
+}
+
+void die_if_kernel(const char *str, ...)
+{
+	char buffer[256];
+	va_list va;
+
+	if (user_mode(__frame))
+		return;
+
+	va_start(va, str);
+	vsprintf(buffer, str, va);
+	va_end(va);
+
+	console_verbose();
+	printk("\n===================================\n");
+	printk("%s\n", buffer);
+	show_backtrace(__frame, 0);
+
+	__break_hijack_kernel_event();
+	do_exit(SIGSEGV);
+}
+
+/*****************************************************************************/
+/*
+ * dump the contents of an exception frame
+ */
+static void show_backtrace_regs(struct pt_regs *frame)
+{
+	unsigned long *reg;
+	int loop;
+
+	/* print the registers for this frame */
+	printk("<-- %s Frame: @%p -->\n",
+	       frame->psr & PSR_S ? "Kernel Mode" : "User Mode",
+	       frame);
+
+	reg = (unsigned long *) frame;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
+
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
+			printk("\n");
+		else
+			printk(" | ");
+	}
+
+	printk("--------\n");
+} /* end show_backtrace_regs() */
+
+/*****************************************************************************/
+/*
+ * generate a backtrace of the kernel stack
+ */
+void show_backtrace(struct pt_regs *frame, unsigned long sp)
+{
+	struct pt_regs *frame0;
+	unsigned long tos = 0, stop = 0, base;
+	int format;
+
+	base = ((((unsigned long) frame) + 8191) & ~8191) - sizeof(struct user_context);
+	frame0 = (struct pt_regs *) base;
+
+	if (sp) {
+		tos = sp;
+		stop = (unsigned long) frame;
+	}
+
+	printk("\nProcess %s (pid: %d)\n\n", current->comm, current->pid);
+
+	for (;;) {
+		/* dump stack segment between frames */
+		//printk("%08lx -> %08lx\n", tos, stop);
+		format = 0;
+		while (tos < stop) {
+			if (format == 0)
+				printk(" %04lx :", tos & 0xffff);
+
+			printk(" %08lx", *(unsigned long *) tos);
+
+			tos += 4;
+			format++;
+			if (format == 8) {
+				printk("\n");
+				format = 0;
+			}
+		}
+
+		if (format > 0)
+			printk("\n");
+
+		/* dump frame 0 outside of the loop */
+		if (frame == frame0)
+			break;
+
+		tos = frame->sp;
+		if (((unsigned long) frame) + sizeof(*frame) != tos) {
+			printk("-- TOS %08lx does not follow frame %p --\n",
+			       tos, frame);
+			break;
+		}
+
+		show_backtrace_regs(frame);
+
+		/* dump the stack between this frame and the next */
+		stop = (unsigned long) frame->next_frame;
+		if (stop != base &&
+		    (stop < tos ||
+		     stop > base ||
+		     (stop < base && stop + sizeof(*frame) > base) ||
+		     stop & 3)) {
+			printk("-- next_frame %08lx is invalid (range %08lx-%08lx) --\n",
+			       stop, tos, base);
+			break;
+		}
+
+		/* move to next frame */
+		frame = frame->next_frame;
+	}
+
+	/* we can always dump frame 0, even if the rest of the stack is corrupt */
+	show_backtrace_regs(frame0);
+
+} /* end show_backtrace() */
+
+/*****************************************************************************/
+/*
+ * initialise traps
+ */
+void __init trap_init (void)
+{
+} /* end trap_init() */
diff --git a/arch/frv/kernel/uaccess.c b/arch/frv/kernel/uaccess.c
new file mode 100644
index 00000000..374f88d6
--- /dev/null
+++ b/arch/frv/kernel/uaccess.c
@@ -0,0 +1,100 @@
+/* uaccess.c: userspace access functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+/*****************************************************************************/
+/*
+ * copy a null terminated string from userspace
+ */
+long strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	unsigned long max;
+	char *p, ch;
+	long err = -EFAULT;
+
+	BUG_ON(count < 0);
+
+	p = dst;
+
+#ifndef CONFIG_MMU
+	if ((unsigned long) src < memory_start)
+		goto error;
+#endif
+
+	if ((unsigned long) src >= get_addr_limit())
+		goto error;
+
+	max = get_addr_limit() - (unsigned long) src;
+	if ((unsigned long) count > max) {
+		memset(dst + max, 0, count - max);
+		count = max;
+	}
+
+	err = 0;
+	for (; count > 0; count--, p++, src++) {
+		__get_user_asm(err, ch, src, "ub", "=r");
+		if (err < 0)
+			goto error;
+		if (!ch)
+			break;
+		*p = ch;
+	}
+
+	err = p - dst; /* return length excluding NUL */
+
+ error:
+	if (count > 0)
+		memset(p, 0, count); /* clear remainder of buffer [security] */
+
+	return err;
+
+} /* end strncpy_from_user() */
+
+EXPORT_SYMBOL(strncpy_from_user);
+
+/*****************************************************************************/
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+long strnlen_user(const char __user *src, long count)
+{
+	const char __user *p;
+	long err = 0;
+	char ch;
+
+	BUG_ON(count < 0);
+
+#ifndef CONFIG_MMU
+	if ((unsigned long) src < memory_start)
+		return 0;
+#endif
+
+	if ((unsigned long) src >= get_addr_limit())
+		return 0;
+
+	for (p = src; count > 0; count--, p++) {
+		__get_user_asm(err, ch, p, "ub", "=r");
+		if (err < 0)
+			return 0;
+		if (!ch)
+			break;
+	}
+
+	return p - src + 1; /* return length including NUL */
+
+} /* end strnlen_user() */
+
+EXPORT_SYMBOL(strnlen_user);
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
new file mode 100644
index 00000000..7e958d82
--- /dev/null
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -0,0 +1,132 @@
+/* ld script to make FRV Linux kernel
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
+ */
+OUTPUT_FORMAT("elf32-frv", "elf32-frv", "elf32-frv")
+OUTPUT_ARCH(frv)
+ENTRY(_start)
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+jiffies = jiffies_64 + 4;
+
+__page_offset = CONFIG_PAGE_OFFSET;	/* start of area covered by struct pages */
+__kernel_image_start = __page_offset;	/* address at which kernel image resides */
+
+SECTIONS
+{
+  . = __kernel_image_start;
+
+  /* discardable initialisation code and data */
+  . = ALIGN(PAGE_SIZE);			/* Init code and data */
+  __init_begin = .;
+
+  _sinittext = .;
+  .init.text : {
+	HEAD_TEXT
+#ifndef CONFIG_DEBUG_INFO
+	INIT_TEXT
+	EXIT_TEXT
+	EXIT_DATA
+	*(.exitcall.exit)
+#endif
+  }
+  _einittext = .;
+
+  INIT_DATA_SECTION(8)
+  PERCPU_SECTION(L1_CACHE_BYTES)
+
+  . = ALIGN(PAGE_SIZE);
+  __init_end = .;
+
+  .trap : {
+	/* trap table management - read entry-table.S before modifying */
+	. = ALIGN(8192);
+	__trap_tables = .;
+	*(.trap.user)
+	*(.trap.kernel)
+	. = ALIGN(4096);
+	*(.trap.break)
+  }
+
+  /* Text and read-only data */
+  . = ALIGN(4);
+  _text = .;
+  _stext = .;
+  .text : {
+	*(.text..start)
+	*(.text..entry)
+	*(.text..break)
+	*(.text..tlbmiss)
+	TEXT_TEXT
+	SCHED_TEXT
+	LOCK_TEXT
+#ifdef CONFIG_DEBUG_INFO
+	INIT_TEXT
+	EXIT_TEXT
+	*(.exitcall.exit)
+#endif
+	*(.fixup)
+	*(.gnu.warning)
+	*(.exitcall.exit)
+	} = 0x9090
+
+  _etext = .;			/* End of text section */
+
+  RODATA
+
+  .rodata : {
+	*(.trap.vector)
+
+	/* this clause must not be modified - the ordering and adjacency are imperative */
+	__trap_fixup_tables = .;
+	*(.trap.fixup.user .trap.fixup.kernel)
+
+	}
+
+  EXCEPTION_TABLE(8)
+
+  _sdata = .;
+  .data : {			/* Data */
+	INIT_TASK_DATA(THREAD_SIZE)
+	CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+	DATA_DATA
+	*(.data.*)
+	EXIT_DATA
+	CONSTRUCTORS
+	}
+
+  _edata = .;			/* End of data section */
+
+  /* GP section */
+  . = ALIGN(L1_CACHE_BYTES);
+  _gp = . + 2048;
+  PROVIDE (gp = _gp);
+
+  .sdata : { *(.sdata .sdata.*) }
+
+  /* BSS */
+  . = ALIGN(L1_CACHE_BYTES);
+  __bss_start = .;
+
+  .sbss		: { *(.sbss .sbss.*) }
+  .bss		: { *(.bss .bss.*) }
+  .bss..stack	: { *(.bss) }
+
+  __bss_stop = .;
+  _end = . ;
+  . = ALIGN(PAGE_SIZE);
+  __kernel_image_end = .;
+
+  STABS_DEBUG
+  DWARF_DEBUG
+
+  .comment 0 : { *(.comment) }
+
+  DISCARDS
+}
+
+__kernel_image_size_no_bss = __bss_start - __kernel_image_start;
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
new file mode 100644
index 00000000..4ff2fb1e
--- /dev/null
+++ b/arch/frv/lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for FRV-specific library files..
+#
+
+lib-y := \
+	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
+	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
diff --git a/arch/frv/lib/__ashldi3.S b/arch/frv/lib/__ashldi3.S
new file mode 100644
index 00000000..db5b6dc3
--- /dev/null
+++ b/arch/frv/lib/__ashldi3.S
@@ -0,0 +1,40 @@
+/* __ashldi3.S:	64-bit arithmetic shift left
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# unsigned long long __ashldi3(unsigned long long value [GR8:GR9], unsigned by [GR10])
+#
+###############################################################################
+        .globl		__ashldi3
+        .type		__ashldi3,@function
+__ashldi3:
+	andicc.p	gr10,#63,gr10,icc0
+	setlos		#32,gr5
+	andicc.p	gr10,#32,gr0,icc1
+	beqlr		icc0,#0
+	ckeq		icc1,cc4			; cc4 is true if 0<N<32
+
+	# deal with a shift in the range 1<=N<=31
+	csll.p		gr8,gr10,gr8	,cc4,#1		; MSW <<= N
+	csub		gr5,gr10,gr5	,cc4,#1		; M = 32 - N
+	csrl.p		gr9,gr5,gr4	,cc4,#1
+	csll		gr9,gr10,gr9	,cc4,#1		; LSW <<= N
+	cor.p		gr4,gr8,gr8	,cc4,#1		; MSW |= LSW >> M
+
+	# deal with a shift in the range 32<=N<=63
+	csll		gr9,gr10,gr8	,cc4,#0		; MSW = LSW << (N & 31 [implicit AND])
+	cor.p		gr0,gr0,gr9	,cc4,#0		; LSW = 0
+	bralr
+	.size		__ashldi3, .-__ashldi3
diff --git a/arch/frv/lib/__ashrdi3.S b/arch/frv/lib/__ashrdi3.S
new file mode 100644
index 00000000..5742665b
--- /dev/null
+++ b/arch/frv/lib/__ashrdi3.S
@@ -0,0 +1,41 @@
+/* __ashrdi3.S:	64-bit arithmetic shift right
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# signed long long __ashrdi3(signed long long value [GR8:GR9], unsigned by [GR10])
+#
+###############################################################################
+        .globl		__ashrdi3
+        .type		__ashrdi3,@function
+__ashrdi3:
+	andicc.p	gr10,#63,gr10,icc0
+	setlos		#32,gr5
+	andicc.p	gr10,#32,gr0,icc1
+	beqlr		icc0,#0
+	setlos.p	#31,gr6
+	ckeq		icc1,cc4			; cc4 is true if 0<N<32
+
+	# deal with a shift in the range 1<=N<=31
+	csrl.p		gr9,gr10,gr9	,cc4,#1		; LSW >>= N
+	csub		gr5,gr10,gr5	,cc4,#1		; M = 32 - N
+	csll.p		gr8,gr5,gr4	,cc4,#1
+	csra		gr8,gr10,gr8	,cc4,#1		; MSW >>= N
+	cor.p		gr4,gr9,gr9	,cc4,#1		; LSW |= MSW << M
+
+	# deal with a shift in the range 32<=N<=63
+	csra		gr8,gr10,gr9	,cc4,#0		; LSW = MSW >> (N & 31 [implicit AND])
+	csra.p		gr8,gr6,gr8	,cc4,#0		; MSW >>= 31
+	bralr
+	.size		__ashrdi3, .-__ashrdi3
diff --git a/arch/frv/lib/__lshrdi3.S b/arch/frv/lib/__lshrdi3.S
new file mode 100644
index 00000000..7b41f630
--- /dev/null
+++ b/arch/frv/lib/__lshrdi3.S
@@ -0,0 +1,40 @@
+/* __lshrdi3.S:	64-bit logical shift right
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# unsigned long long __lshrdi3(unsigned long long value [GR8:GR9], unsigned by [GR10])
+#
+###############################################################################
+        .globl		__lshrdi3
+        .type		__lshrdi3,@function
+__lshrdi3:
+	andicc.p	gr10,#63,gr10,icc0
+	setlos		#32,gr5
+	andicc.p	gr10,#32,gr0,icc1
+	beqlr		icc0,#0
+	ckeq		icc1,cc4			; cc4 is true if 0<N<32
+
+	# deal with a shift in the range 1<=N<=31
+	csrl.p		gr9,gr10,gr9	,cc4,#1		; LSW >>= N
+	csub		gr5,gr10,gr5	,cc4,#1		; M = 32 - N
+	csll.p		gr8,gr5,gr4	,cc4,#1
+	csrl		gr8,gr10,gr8	,cc4,#1		; MSW >>= N
+	cor.p		gr4,gr9,gr9	,cc4,#1		; LSW |= MSW << M
+
+	# deal with a shift in the range 32<=N<=63
+	csrl		gr8,gr10,gr9	,cc4,#0		; LSW = MSW >> (N & 31 [implicit AND])
+	cor.p		gr0,gr0,gr8	,cc4,#0		; MSW = 0
+	bralr
+	.size		__lshrdi3, .-__lshrdi3
diff --git a/arch/frv/lib/__muldi3.S b/arch/frv/lib/__muldi3.S
new file mode 100644
index 00000000..2703d9b7
--- /dev/null
+++ b/arch/frv/lib/__muldi3.S
@@ -0,0 +1,32 @@
+/* __muldi3.S:	64-bit multiply
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# unsigned long long __muldi3(unsigned long long x [GR8:GR9],
+#                             unsigned long long y [GR10:GR11])
+#
+###############################################################################
+        .globl		__muldi3, __mulll, __umulll
+        .type		__muldi3,@function
+__muldi3:
+__mulll:
+__umulll:
+	umul		gr8,gr11,gr4		; GR4:GR5 = x.MSW * y.LSW
+	umul		gr9,gr10,gr6		; GR6:GR7 = x.LSW * y.MSW
+	umul.p		gr9,gr11,gr8		; GR8:GR9 = x.LSW * y.LSW
+	add		gr5,gr7,gr5
+	add.p		gr8,gr5,gr8		; GR8 += GR5 + GR7
+	bralr
+	.size		__muldi3, .-__muldi3
diff --git a/arch/frv/lib/__negdi2.S b/arch/frv/lib/__negdi2.S
new file mode 100644
index 00000000..d1747bf2
--- /dev/null
+++ b/arch/frv/lib/__negdi2.S
@@ -0,0 +1,28 @@
+/* __negdi2.S: 64-bit negate
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# unsigned long long __negdi2(unsigned long long value [GR8:GR9])
+#
+###############################################################################
+        .globl		__negdi2
+        .type		__negdi2,@function
+__negdi2:
+	subcc		gr0,gr9,gr9,icc0
+	subx		gr0,gr8,gr8,icc0
+	bralr
+	.size		__negdi2, .-__negdi2
+
diff --git a/arch/frv/lib/__ucmpdi2.S b/arch/frv/lib/__ucmpdi2.S
new file mode 100644
index 00000000..d892f16f
--- /dev/null
+++ b/arch/frv/lib/__ucmpdi2.S
@@ -0,0 +1,45 @@
+/* __ucmpdi2.S: 64-bit unsigned compare
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# int __ucmpdi2(unsigned long long a [GR8:GR9],
+#		unsigned long long b [GR10:GR11])
+#
+# - returns 0, 1, or 2 as a <, =, > b respectively.
+#
+###############################################################################
+        .globl		__ucmpdi2
+        .type		__ucmpdi2,@function
+__ucmpdi2:
+	or.p		gr8,gr0,gr4
+	subcc		gr8,gr10,gr0,icc0
+	setlos.p	#0,gr8
+	bclr		icc0,#2			; a.msw < b.msw
+
+	setlos.p	#2,gr8
+	bhilr		icc0,#0			; a.msw > b.msw
+
+	subcc.p		gr9,gr11,gr0,icc1
+	setlos		#0,gr8
+	setlos.p	#2,gr9
+	setlos		#1,gr7
+	cknc		icc1,cc6
+	cor.p		gr9,gr0,gr8,		cc6,#1
+	cckls		icc1,cc4,		cc6,#1
+	andcr		cc6,cc4,cc4
+	cor		gr7,gr0,gr8,		cc4,#1
+	bralr
+	.size		__ucmpdi2, .-__ucmpdi2
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
new file mode 100644
index 00000000..5e9e6ab5
--- /dev/null
+++ b/arch/frv/lib/atomic-ops.S
@@ -0,0 +1,172 @@
+/* atomic-ops.S: kernel atomic operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+	.text
+	.balign 4
+
+###############################################################################
+#
+# unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v);
+#
+###############################################################################
+	.globl		atomic_test_and_ANDNOT_mask
+        .type		atomic_test_and_ANDNOT_mask,@function
+atomic_test_and_ANDNOT_mask:
+	not.p		gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ld.p		@(gr9,gr0),gr8			/* LD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	and		gr8,gr10,gr11
+	cst.p		gr11,@(gr9,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic_test_and_ANDNOT_mask, .-atomic_test_and_ANDNOT_mask
+
+###############################################################################
+#
+# unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v);
+#
+###############################################################################
+	.globl		atomic_test_and_OR_mask
+        .type		atomic_test_and_OR_mask,@function
+atomic_test_and_OR_mask:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ld.p		@(gr9,gr0),gr8			/* LD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	or		gr8,gr10,gr11
+	cst.p		gr11,@(gr9,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic_test_and_OR_mask, .-atomic_test_and_OR_mask
+
+###############################################################################
+#
+# unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v);
+#
+###############################################################################
+	.globl		atomic_test_and_XOR_mask
+        .type		atomic_test_and_XOR_mask,@function
+atomic_test_and_XOR_mask:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ld.p		@(gr9,gr0),gr8			/* LD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	xor		gr8,gr10,gr11
+	cst.p		gr11,@(gr9,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic_test_and_XOR_mask, .-atomic_test_and_XOR_mask
+
+###############################################################################
+#
+# int atomic_add_return(int i, atomic_t *v)
+#
+###############################################################################
+	.globl		atomic_add_return
+        .type		atomic_add_return,@function
+atomic_add_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ld.p		@(gr9,gr0),gr8			/* LD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	add		gr8,gr10,gr8
+	cst.p		gr8,@(gr9,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic_add_return, .-atomic_add_return
+
+###############################################################################
+#
+# int atomic_sub_return(int i, atomic_t *v)
+#
+###############################################################################
+	.globl		atomic_sub_return
+        .type		atomic_sub_return,@function
+atomic_sub_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ld.p		@(gr9,gr0),gr8			/* LD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	sub		gr8,gr10,gr8
+	cst.p		gr8,@(gr9,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic_sub_return, .-atomic_sub_return
+
+###############################################################################
+#
+# uint32_t __xchg_32(uint32_t i, uint32_t *v)
+#
+###############################################################################
+	.globl		__xchg_32
+        .type		__xchg_32,@function
+__xchg_32:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ld.p		@(gr9,gr0),gr8			/* LD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	cst.p		gr10,@(gr9,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__xchg_32, .-__xchg_32
+
+###############################################################################
+#
+# uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new)
+#
+###############################################################################
+	.globl		__cmpxchg_32
+        .type		__cmpxchg_32,@function
+__cmpxchg_32:
+	or.p		gr8,gr8,gr11
+0:
+	orcc		gr0,gr0,gr0,icc3
+	ckeq		icc3,cc7
+	ld.p		@(gr11,gr0),gr8
+	orcr		cc7,cc7,cc3
+	subcc		gr8,gr9,gr7,icc0
+	bnelr		icc0,#0
+	cst.p		gr10,@(gr11,gr0)	,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 00000000..b6194eea
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+	.text
+	.balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_inc_return
+        .type		atomic64_inc_return,@function
+atomic64_inc_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addicc		gr9,#1,gr9,icc0
+	addxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_dec_return
+        .type		atomic64_dec_return,@function
+atomic64_dec_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subicc		gr9,#1,gr9,icc0
+	subxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_add_return
+        .type		atomic64_add_return,@function
+atomic64_add_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addcc		gr9,gr5,gr9,icc0
+	addx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_sub_return
+        .type		atomic64_sub_return,@function
+atomic64_sub_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subcc		gr9,gr5,gr9,icc0
+	subx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+	.globl		__xchg_64
+        .type		__xchg_64,@function
+__xchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	cstd.p		gr4,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+	.globl		__cmpxchg_64
+        .type		__cmpxchg_64,@function
+__cmpxchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr12,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3
+	subcc		gr8,gr4,gr0,icc0
+	subcc.p		gr9,gr5,gr0,icc1
+	bnelr		icc0,#0
+	bnelr		icc1,#0
+	cstd.p		gr10,@(gr12,gr0)	,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/cache.S b/arch/frv/lib/cache.S
new file mode 100644
index 00000000..0c4fb204
--- /dev/null
+++ b/arch/frv/lib/cache.S
@@ -0,0 +1,98 @@
+/* cache.S: cache management routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+#include <asm/cache.h>
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# Write back a range of dcache
+# - void frv_dcache_writeback(unsigned long start [GR8], unsigned long size [GR9])
+#
+###############################################################################
+        .globl		frv_dcache_writeback
+        .type		frv_dcache_writeback,@function
+frv_dcache_writeback:
+	andi		gr8,~(L1_CACHE_BYTES-1),gr8
+
+2:	dcf		@(gr8,gr0)
+	addi		gr8,#L1_CACHE_BYTES,gr8
+	cmp		gr9,gr8,icc0
+	bhi		icc0,#2,2b
+
+	membar
+	bralr
+	.size		frv_dcache_writeback, .-frv_dcache_writeback
+
+##############################################################################
+#
+# Invalidate a range of dcache and icache
+# - void frv_cache_invalidate(unsigned long start [GR8], unsigned long end [GR9]);
+#
+###############################################################################
+        .globl		frv_cache_invalidate
+        .type		frv_cache_invalidate,@function
+frv_cache_invalidate:
+	andi		gr8,~(L1_CACHE_BYTES-1),gr8
+
+2:	dci		@(gr8,gr0)
+	ici		@(gr8,gr0)
+	addi		gr8,#L1_CACHE_BYTES,gr8
+	cmp		gr9,gr8,icc0
+	bhi		icc0,#2,2b
+
+	membar
+	bralr
+	.size		frv_cache_invalidate, .-frv_cache_invalidate
+
+##############################################################################
+#
+# Invalidate a range of icache
+# - void frv_icache_invalidate(unsigned long start [GR8], unsigned long end [GR9]);
+#
+###############################################################################
+        .globl		frv_icache_invalidate
+        .type		frv_icache_invalidate,@function
+frv_icache_invalidate:
+	andi		gr8,~(L1_CACHE_BYTES-1),gr8
+
+2:	ici		@(gr8,gr0)
+	addi		gr8,#L1_CACHE_BYTES,gr8
+	cmp		gr9,gr8,icc0
+	bhi		icc0,#2,2b
+
+	membar
+	bralr
+	.size		frv_icache_invalidate, .-frv_icache_invalidate
+
+###############################################################################
+#
+# Write back and invalidate a range of dcache and icache
+# - void frv_cache_wback_inv(unsigned long start [GR8], unsigned long end [GR9])
+#
+###############################################################################
+        .globl		frv_cache_wback_inv
+        .type		frv_cache_wback_inv,@function
+frv_cache_wback_inv:
+	andi		gr8,~(L1_CACHE_BYTES-1),gr8
+
+2:	dcf		@(gr8,gr0)
+	ici		@(gr8,gr0)
+	addi		gr8,#L1_CACHE_BYTES,gr8
+	cmp		gr9,gr8,icc0
+	bhi		icc0,#2,2b
+
+	membar
+	bralr
+	.size		frv_cache_wback_inv, .-frv_cache_wback_inv
diff --git a/arch/frv/lib/checksum.c b/arch/frv/lib/checksum.c
new file mode 100644
index 00000000..44e16d59
--- /dev/null
+++ b/arch/frv/lib/checksum.c
@@ -0,0 +1,166 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Tom May, <ftom@netcom.com>
+ *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ *		Lots of code moved from tcp.c and ip.c; see those files
+ *		for more names.
+ *
+ * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
+ *		Fixed some nasty bugs, causing some horrible crashes.
+ *		A: At some points, the sum (%0) was used as
+ *		length-counter instead of the length counter
+ *		(%1). Thanks to Roman Hodek for pointing this out.
+ *		B: GCC seems to mess up if one uses too many
+ *		data-registers to hold input values and one tries to
+ *		specify d0 and d1 as scratch registers. Letting gcc choose these
+ *      registers itself solves the problem.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
+   of the assembly has to go. */
+
+#include <net/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned short from32to16(unsigned long x)
+{
+	/* add up 16-bit and 16-bit for 16+c bit */
+	x = (x & 0xffff) + (x >> 16);
+	/* add up carry.. */
+	x = (x & 0xffff) + (x >> 16);
+	return x;
+}
+
+static unsigned long do_csum(const unsigned char * buff, int len)
+{
+	int odd, count;
+	unsigned long result = 0;
+
+	if (len <= 0)
+		goto out;
+	odd = 1 & (unsigned long) buff;
+	if (odd) {
+		result = *buff;
+		len--;
+		buff++;
+	}
+	count = len >> 1;		/* nr of 16-bit words.. */
+	if (count) {
+		if (2 & (unsigned long) buff) {
+			result += *(unsigned short *) buff;
+			count--;
+			len -= 2;
+			buff += 2;
+		}
+		count >>= 1;		/* nr of 32-bit words.. */
+		if (count) {
+		        unsigned long carry = 0;
+			do {
+				unsigned long w = *(unsigned long *) buff;
+				count--;
+				buff += 4;
+				result += carry;
+				result += w;
+				carry = (w > result);
+			} while (count);
+			result += carry;
+			result = (result & 0xffff) + (result >> 16);
+		}
+		if (len & 2) {
+			result += *(unsigned short *) buff;
+			buff += 2;
+		}
+	}
+	if (len & 1)
+		result += (*buff << 8);
+	result = from32to16(result);
+	if (odd)
+		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+out:
+	return result;
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+	unsigned int result = do_csum(buff, len);
+
+	/* add in old sum, and carry.. */
+	result += (__force u32)sum;
+	if ((__force u32)sum > result)
+		result += 1;
+	return (__force __wsum)result;
+}
+
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+	return (__force __sum16)~do_csum(buff, len);
+}
+
+EXPORT_SYMBOL(ip_compute_csum);
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+			    int len, __wsum sum, int *csum_err)
+{
+	int rem;
+
+	if (csum_err)
+		*csum_err = 0;
+
+	rem = copy_from_user(dst, src, len);
+	if (rem != 0) {
+		if (csum_err)
+			*csum_err = -EFAULT;
+		memset(dst + len - rem, 0, rem);
+		len = rem;
+	}
+
+	return csum_partial(dst, len, sum);
+}
+
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+	memcpy(dst, src, len);
+	return csum_partial(dst, len, sum);
+}
+
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
diff --git a/arch/frv/lib/insl_ns.S b/arch/frv/lib/insl_ns.S
new file mode 100644
index 00000000..d1658425
--- /dev/null
+++ b/arch/frv/lib/insl_ns.S
@@ -0,0 +1,52 @@
+/* insl_ns.S: input array of 4b words from device port without byte swapping
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# void __insl_ns(unsigned int port, void *buf, int n)
+#
+###############################################################################
+        .globl		__insl_ns
+        .type		__insl_ns,@function
+__insl_ns:
+	andicc.p	gr9,#3,gr0,icc0
+	setlos		#4,gr4
+	bne		icc0,#0,__insl_ns_misaligned
+	subi		gr9,#4,gr9
+0:
+	ldi.p		@(gr8,#0),gr5
+	subicc		gr10,#1,gr10,icc0
+	stu.p		gr5,@(gr9,gr4)
+	bhi		icc0,#2,0b
+	bralr
+
+__insl_ns_misaligned:
+	subi.p		gr9,#1,gr9
+	setlos		#1,gr4
+0:
+	ldi		@(gr8,#0),gr5
+
+	srli		gr5,#24,gr6
+	stbu.p		gr6,@(gr9,gr4)
+	srli		gr5,#16,gr6
+	stbu.p		gr6,@(gr9,gr4)
+	srli		gr5,#8,gr6
+	stbu.p		gr6,@(gr9,gr4)
+	subicc		gr10,#1,gr10,icc0
+	stbu.p		gr5,@(gr9,gr4)
+	bhi		icc0,#2,0b
+	bralr
+
+	.size		__insl_ns, .-__insl_ns
diff --git a/arch/frv/lib/insl_sw.S b/arch/frv/lib/insl_sw.S
new file mode 100644
index 00000000..9b5aa95d
--- /dev/null
+++ b/arch/frv/lib/insl_sw.S
@@ -0,0 +1,40 @@
+/* insl_sw.S: input array of 4b words from device port with byte swapping
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# void __insl_sw(unsigned int port, void *buf, int n)
+#
+###############################################################################
+        .globl		__insl_sw
+        .type		__insl_sw,@function
+__insl_sw:
+	subi.p		gr9,#1,gr9
+	setlos		#1,gr4
+0:
+	ldi.p		@(gr8,#0),gr5		; get 0xAABBCCDD
+	subicc		gr10,#1,gr10,icc0
+
+	stbu.p		gr5,@(gr9,gr4)		; write 0xDD
+	srli		gr5,#8,gr5
+	stbu.p		gr5,@(gr9,gr4)		; write 0xCC
+	srli		gr5,#8,gr5
+	stbu.p		gr5,@(gr9,gr4)		; write 0xBB
+	srli		gr5,#8,gr5
+	stbu.p		gr5,@(gr9,gr4)		; write 0xAA
+	bhi		icc0,#2,0b
+	bralr
+
+	.size		__insl_sw, .-__insl_sw
diff --git a/arch/frv/lib/memcpy.S b/arch/frv/lib/memcpy.S
new file mode 100644
index 00000000..9c596527
--- /dev/null
+++ b/arch/frv/lib/memcpy.S
@@ -0,0 +1,135 @@
+/* memcpy.S: optimised assembly memcpy
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# void *memcpy(void *to, const char *from, size_t count)
+#
+# - NOTE: must not use any stack. exception detection performs function return
+#         to caller's fixup routine, aborting the remainder of the copy
+#
+###############################################################################
+        .globl		memcpy,__memcpy_end
+        .type		memcpy,@function
+memcpy:
+	or.p		gr8,gr9,gr4
+	orcc		gr10,gr0,gr0,icc3
+	or.p		gr10,gr4,gr4
+	beqlr		icc3,#0
+
+	# optimise based on best common alignment for to, from & count
+	andicc.p	gr4,#0x0f,gr0,icc0
+	setlos		#8,gr11
+	andicc.p	gr4,#0x07,gr0,icc1
+	beq		icc0,#0,memcpy_16
+	andicc.p	gr4,#0x03,gr0,icc0
+	beq		icc1,#0,memcpy_8
+	andicc.p	gr4,#0x01,gr0,icc1
+	beq		icc0,#0,memcpy_4
+	setlos.p	#1,gr11
+	beq		icc1,#0,memcpy_2
+
+	# do byte by byte copy
+	sub.p		gr8,gr11,gr3
+	sub		gr9,gr11,gr9
+0:	ldubu.p		@(gr9,gr11),gr4
+	subicc		gr10,#1,gr10,icc0
+	stbu.p		gr4,@(gr3,gr11)
+	bne		icc0,#2,0b
+	bralr
+
+	# do halfword by halfword copy
+memcpy_2:
+	setlos		#2,gr11
+	sub.p		gr8,gr11,gr3
+	sub		gr9,gr11,gr9
+0:	lduhu.p		@(gr9,gr11),gr4
+	subicc		gr10,#2,gr10,icc0
+	sthu.p		gr4,@(gr3,gr11)
+	bne		icc0,#2,0b
+	bralr
+
+	# do word by word copy
+memcpy_4:
+	setlos		#4,gr11
+	sub.p		gr8,gr11,gr3
+	sub		gr9,gr11,gr9
+0:	ldu.p		@(gr9,gr11),gr4
+	subicc		gr10,#4,gr10,icc0
+	stu.p		gr4,@(gr3,gr11)
+	bne		icc0,#2,0b
+	bralr
+
+	# do double-word by double-word copy
+memcpy_8:
+	sub.p		gr8,gr11,gr3
+	sub		gr9,gr11,gr9
+0:	lddu.p		@(gr9,gr11),gr4
+	subicc		gr10,#8,gr10,icc0
+	stdu.p		gr4,@(gr3,gr11)
+	bne		icc0,#2,0b
+	bralr
+
+	# do quad-word by quad-word copy
+memcpy_16:
+	sub.p		gr8,gr11,gr3
+	sub		gr9,gr11,gr9
+0:	lddu		@(gr9,gr11),gr4
+	lddu.p		@(gr9,gr11),gr6
+	subicc		gr10,#16,gr10,icc0
+	stdu		gr4,@(gr3,gr11)
+	stdu.p		gr6,@(gr3,gr11)
+	bne		icc0,#2,0b
+	bralr
+__memcpy_end:
+
+	.size		memcpy, __memcpy_end-memcpy
+
+###############################################################################
+#
+# copy to/from userspace
+# - return the number of bytes that could not be copied (0 on complete success)
+#
+# long __memcpy_user(void *dst, const void *src, size_t count)
+#
+###############################################################################
+        .globl		__memcpy_user, __memcpy_user_error_lr, __memcpy_user_error_handler
+        .type		__memcpy_user,@function
+__memcpy_user:
+	movsg		lr,gr7
+	subi.p		sp,#8,sp
+	add		gr8,gr10,gr6		; calculate expected end address
+	stdi		gr6,@(sp,#0)
+
+	# abuse memcpy to do the dirty work
+	call		memcpy
+__memcpy_user_error_lr:
+	ldi.p		@(sp,#4),gr7
+	setlos		#0,gr8
+	jmpl.p		@(gr7,gr0)
+	addi		sp,#8,sp
+
+	# deal any exception generated by memcpy
+	# GR8 - memcpy's current dest address
+	# GR11 - memset's step value (index register for store insns)
+__memcpy_user_error_handler:
+	lddi.p		@(sp,#0),gr4		; load GR4 with dst+count, GR5 with ret addr
+	add		gr11,gr3,gr7
+	sub.p		gr4,gr7,gr8
+
+	addi		sp,#8,sp
+	jmpl		@(gr5,gr0)
+
+	.size		__memcpy_user, .-__memcpy_user
diff --git a/arch/frv/lib/memset.S b/arch/frv/lib/memset.S
new file mode 100644
index 00000000..55a35263
--- /dev/null
+++ b/arch/frv/lib/memset.S
@@ -0,0 +1,182 @@
+/* memset.S: optimised assembly memset
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# void *memset(void *p, char ch, size_t count)
+#
+# - NOTE: must not use any stack. exception detection performs function return
+#         to caller's fixup routine, aborting the remainder of the set
+#         GR4, GR7, GR8, and GR11 must be managed
+#
+###############################################################################
+        .globl		memset,__memset_end
+        .type		memset,@function
+memset:
+	orcc.p		gr10,gr0,gr5,icc3		; GR5 = count
+	andi		gr9,#0xff,gr9
+	or.p		gr8,gr0,gr4			; GR4 = address
+	beqlr		icc3,#0
+
+	# conditionally write a byte to 2b-align the address
+	setlos.p	#1,gr6
+	andicc		gr4,#1,gr0,icc0
+	ckne		icc0,cc7
+	cstb.p		gr9,@(gr4,gr0)		,cc7,#1
+	csubcc		gr5,gr6,gr5		,cc7,#1	; also set ICC3
+	cadd.p		gr4,gr6,gr4		,cc7,#1
+	beqlr		icc3,#0
+
+	# conditionally write a word to 4b-align the address
+	andicc.p	gr4,#2,gr0,icc0
+	subicc		gr5,#2,gr0,icc1
+	setlos.p	#2,gr6
+	ckne		icc0,cc7
+	slli.p		gr9,#8,gr12			; need to double up the pattern
+	cknc		icc1,cc5
+	or.p		gr9,gr12,gr12
+	andcr		cc7,cc5,cc7
+
+	csth.p		gr12,@(gr4,gr0)		,cc7,#1
+	csubcc		gr5,gr6,gr5		,cc7,#1	; also set ICC3
+	cadd.p		gr4,gr6,gr4		,cc7,#1
+	beqlr		icc3,#0
+
+	# conditionally write a dword to 8b-align the address
+	andicc.p	gr4,#4,gr0,icc0
+	subicc		gr5,#4,gr0,icc1
+	setlos.p	#4,gr6
+	ckne		icc0,cc7
+	slli.p		gr12,#16,gr13			; need to quadruple-up the pattern
+	cknc		icc1,cc5
+	or.p		gr13,gr12,gr12
+	andcr		cc7,cc5,cc7
+
+	cst.p		gr12,@(gr4,gr0)		,cc7,#1
+	csubcc		gr5,gr6,gr5		,cc7,#1	; also set ICC3
+	cadd.p		gr4,gr6,gr4		,cc7,#1
+	beqlr		icc3,#0
+
+	or.p		gr12,gr12,gr13			; need to octuple-up the pattern
+
+	# the address is now 8b-aligned - loop around writing 64b chunks
+	setlos		#8,gr7
+	subi.p		gr4,#8,gr4			; store with update index does weird stuff
+	setlos		#64,gr6
+
+	subicc		gr5,#64,gr0,icc0
+0:	cknc		icc0,cc7
+	cstdu		gr12,@(gr4,gr7)		,cc7,#1
+	cstdu		gr12,@(gr4,gr7)		,cc7,#1
+	cstdu		gr12,@(gr4,gr7)		,cc7,#1
+	cstdu		gr12,@(gr4,gr7)		,cc7,#1
+	cstdu		gr12,@(gr4,gr7)		,cc7,#1
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	csubcc		gr5,gr6,gr5		,cc7,#1	; also set ICC3
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	subicc		gr5,#64,gr0,icc0
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	beqlr		icc3,#0
+	bnc		icc0,#2,0b
+
+	# now do 32-byte remnant
+	subicc.p	gr5,#32,gr0,icc0
+	setlos		#32,gr6
+	cknc		icc0,cc7
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	csubcc		gr5,gr6,gr5		,cc7,#1	; also set ICC3
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	setlos		#16,gr6
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	subicc		gr5,#16,gr0,icc0
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	beqlr		icc3,#0
+
+	# now do 16-byte remnant
+	cknc		icc0,cc7
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	csubcc		gr5,gr6,gr5		,cc7,#1	; also set ICC3
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	beqlr		icc3,#0
+
+	# now do 8-byte remnant
+	subicc		gr5,#8,gr0,icc1
+	cknc		icc1,cc7
+	cstdu.p		gr12,@(gr4,gr7)		,cc7,#1
+	csubcc		gr5,gr7,gr5		,cc7,#1	; also set ICC3
+	setlos.p	#4,gr7
+	beqlr		icc3,#0
+
+	# now do 4-byte remnant
+	subicc		gr5,#4,gr0,icc0
+	addi.p		gr4,#4,gr4
+	cknc		icc0,cc7
+	cstu.p		gr12,@(gr4,gr7)		,cc7,#1
+	csubcc		gr5,gr7,gr5		,cc7,#1	; also set ICC3
+	subicc.p	gr5,#2,gr0,icc1
+	beqlr		icc3,#0
+
+	# now do 2-byte remnant
+	setlos		#2,gr7
+	addi.p		gr4,#2,gr4
+	cknc		icc1,cc7
+	csthu.p		gr12,@(gr4,gr7)		,cc7,#1
+	csubcc		gr5,gr7,gr5		,cc7,#1	; also set ICC3
+	subicc.p	gr5,#1,gr0,icc0
+	beqlr		icc3,#0
+
+	# now do 1-byte remnant
+	setlos		#0,gr7
+	addi.p		gr4,#2,gr4
+	cknc		icc0,cc7
+	cstb.p		gr12,@(gr4,gr0)		,cc7,#1
+	bralr
+__memset_end:
+
+	.size		memset, __memset_end-memset
+
+###############################################################################
+#
+# clear memory in userspace
+# - return the number of bytes that could not be cleared (0 on complete success)
+#
+# long __memset_user(void *p, size_t count)
+#
+###############################################################################
+        .globl		__memset_user, __memset_user_error_lr, __memset_user_error_handler
+        .type		__memset_user,@function
+__memset_user:
+	movsg		lr,gr11
+
+	# abuse memset to do the dirty work
+	or.p		gr9,gr9,gr10
+	setlos		#0,gr9
+	call		memset
+__memset_user_error_lr:
+	jmpl.p		@(gr11,gr0)
+	setlos		#0,gr8
+
+	# deal any exception generated by memset
+	# GR4  - memset's address tracking pointer
+	# GR7  - memset's step value (index register for store insns)
+	# GR8  - memset's original start address
+	# GR10 - memset's original count
+__memset_user_error_handler:
+	add.p		gr4,gr7,gr4
+	add		gr8,gr10,gr8
+	jmpl.p		@(gr11,gr0)
+	sub		gr8,gr4,gr8		; we return the amount left uncleared
+
+	.size		__memset_user, .-__memset_user
diff --git a/arch/frv/lib/outsl_ns.S b/arch/frv/lib/outsl_ns.S
new file mode 100644
index 00000000..4cd4c46a
--- /dev/null
+++ b/arch/frv/lib/outsl_ns.S
@@ -0,0 +1,59 @@
+/* outsl_ns.S: output array of 4b words to device without byte swapping
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# void __outsl_ns(unsigned int port, const void *buf, int n)
+#
+###############################################################################
+        .globl		__outsl_ns
+        .type		__outsl_ns,@function
+__outsl_ns:
+	andicc.p	gr9,#3,gr0,icc0
+	setlos		#4,gr4
+	bne		icc0,#0,__outsl_ns_misaligned
+	subi		gr9,#4,gr9
+0:
+	ldu.p		@(gr9,gr4),gr5
+	subicc		gr10,#1,gr10,icc0
+	sti.p		gr5,@(gr8,#0)
+	bhi		icc0,#2,0b
+
+	membar
+	bralr
+
+__outsl_ns_misaligned:
+	subi.p		gr9,#1,gr9
+	setlos		#1,gr4
+0:
+	ldubu		@(gr9,gr4),gr5
+	ldubu.p		@(gr9,gr4),gr6
+	slli		gr5,#8,gr5
+	ldubu.p		@(gr9,gr4),gr7
+	or		gr5,gr6,gr5
+	ldubu.p		@(gr9,gr4),gr6
+	slli		gr5,#16,gr5
+	slli.p		gr7,#8,gr7
+	or		gr5,gr6,gr5
+	subicc.p	gr10,#1,gr10,icc0
+	or		gr5,gr7,gr5
+
+	sti.p		gr5,@(gr8,#0)
+	bhi		icc0,#2,0b
+
+	membar
+	bralr
+
+	.size		__outsl_ns, .-__outsl_ns
diff --git a/arch/frv/lib/outsl_sw.S b/arch/frv/lib/outsl_sw.S
new file mode 100644
index 00000000..7eb56d35
--- /dev/null
+++ b/arch/frv/lib/outsl_sw.S
@@ -0,0 +1,45 @@
+/* outsl_ns.S: output array of 4b words to device with byte swapping
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+        .text
+        .p2align	4
+
+###############################################################################
+#
+# void __outsl_sw(unsigned int port, const void *buf, int n)
+#
+###############################################################################
+        .globl		__outsl_sw
+        .type		__outsl_sw,@function
+__outsl_sw:
+	subi.p		gr9,#1,gr9
+	setlos		#1,gr4
+0:
+	ldubu		@(gr9,gr4),gr5
+	ldubu		@(gr9,gr4),gr6
+	slli		gr6,#8,gr6
+	ldubu.p		@(gr9,gr4),gr7
+	or		gr5,gr6,gr5
+	ldubu.p		@(gr9,gr4),gr6
+	slli		gr7,#16,gr7
+	slli.p		gr6,#24,gr6
+	or		gr5,gr7,gr5
+	subicc.p	gr10,#1,gr10,icc0
+	or		gr5,gr6,gr5
+
+	sti.p		gr5,@(gr8,#0)
+	bhi		icc0,#2,0b
+
+	membar
+	bralr
+
+	.size		__outsl_sw, .-__outsl_sw
diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile
new file mode 100644
index 00000000..21f1df1b
--- /dev/null
+++ b/arch/frv/mb93090-mb00/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the MB93090-MB00 motherboard stuff
+#
+
+ifeq "$(CONFIG_PCI)" "y"
+obj-y := pci-frv.o pci-irq.o pci-vdk.o
+
+ifeq "$(CONFIG_MMU)" "y"
+obj-y += pci-dma.o
+else
+obj-y += pci-dma-nommu.o
+endif
+endif
+
+obj-$(CONFIG_MTD) += flash.o
diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c
new file mode 100644
index 00000000..c0e3707c
--- /dev/null
+++ b/arch/frv/mb93090-mb00/flash.c
@@ -0,0 +1,90 @@
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR	0xFF000000	/* Boot ROM */
+#define MB93090_BOOTROM_SIZE	(2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR	0xFF200000	/* User ROM */
+#define MB93090_USERROM_SIZE	(2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+	{
+		.name		= "Filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+	}
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+	.start		= MB93090_BOOTROM_ADDR,
+	.end		= MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev.platform_data = &mb93090_bootrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+	.start		= MB93090_USERROM_ADDR,
+	.end		= MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.dev.platform_data = &mb93090_userrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+	platform_device_register(&mb93090_bootrom);
+	platform_device_register(&mb93090_userrom);
+	return 0;
+}
+
+module_init(mb93090_mtd_init);
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
new file mode 100644
index 00000000..e47857f8
--- /dev/null
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -0,0 +1,145 @@
+/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Woodhouse (dwmw2@infradead.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#if 1
+#define DMA_SRAM_START	dma_coherent_mem_start
+#define DMA_SRAM_END	dma_coherent_mem_end
+#else // Use video RAM on Matrox
+#define DMA_SRAM_START	0xe8900000
+#define DMA_SRAM_END	0xe8a00000
+#endif
+
+struct dma_alloc_record {
+	struct list_head	list;
+	unsigned long		ofs;
+	unsigned long		len;
+};
+
+static DEFINE_SPINLOCK(dma_alloc_lock);
+static LIST_HEAD(dma_alloc_list);
+
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
+{
+	struct dma_alloc_record *new;
+	struct list_head *this = &dma_alloc_list;
+	unsigned long flags;
+	unsigned long start = DMA_SRAM_START;
+	unsigned long end;
+
+	if (!DMA_SRAM_START) {
+		printk("%s called without any DMA area reserved!\n", __func__);
+		return NULL;
+	}
+
+	new = kmalloc(sizeof (*new), GFP_ATOMIC);
+	if (!new)
+		return NULL;
+
+	/* Round up to a reasonable alignment */
+	new->len = (size + 31) & ~31;
+
+	spin_lock_irqsave(&dma_alloc_lock, flags);
+
+	list_for_each (this, &dma_alloc_list) {
+		struct dma_alloc_record *this_r = list_entry(this, struct dma_alloc_record, list);
+		end = this_r->ofs;
+
+		if (end - start >= size)
+			goto gotone;
+
+		start = this_r->ofs + this_r->len;
+	}
+	/* Reached end of list. */
+	end = DMA_SRAM_END;
+	this = &dma_alloc_list;
+
+	if (end - start >= size) {
+	gotone:
+		new->ofs = start;
+		list_add_tail(&new->list, this);
+		spin_unlock_irqrestore(&dma_alloc_lock, flags);
+
+		*dma_handle = start;
+		return (void *)start;
+	}
+
+	kfree(new);
+	spin_unlock_irqrestore(&dma_alloc_lock, flags);
+	return NULL;
+}
+
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+	struct dma_alloc_record *rec;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_alloc_lock, flags);
+
+	list_for_each_entry(rec, &dma_alloc_list, list) {
+		if (rec->ofs == dma_handle) {
+			list_del(&rec->list);
+			kfree(rec);
+			spin_unlock_irqrestore(&dma_alloc_lock, flags);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&dma_alloc_lock, flags);
+	BUG();
+}
+
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+			  enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
+
+	return virt_to_bus(ptr);
+}
+
+EXPORT_SYMBOL(dma_map_single);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction direction)
+{
+	int i;
+
+	for (i=0; i<nents; i++)
+		frv_cache_wback_inv(sg_dma_address(&sg[i]),
+				    sg_dma_address(&sg[i]) + sg_dma_len(&sg[i]));
+
+	BUG_ON(direction == DMA_NONE);
+
+	return nents;
+}
+
+EXPORT_SYMBOL(dma_map_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+			size_t size, enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	flush_dcache_page(page);
+	return (dma_addr_t) page_to_phys(page) + offset;
+}
+
+EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
new file mode 100644
index 00000000..4f8d8bcd
--- /dev/null
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -0,0 +1,91 @@
+/* pci-dma.c: Dynamic DMA mapping support for the FRV CPUs that have MMUs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/export.h>
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
+{
+	void *ret;
+
+	ret = consistent_alloc(gfp, size, dma_handle);
+	if (ret)
+		memset(ret, 0, size);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+	consistent_free(vaddr);
+}
+
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+			  enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
+
+	return virt_to_bus(ptr);
+}
+
+EXPORT_SYMBOL(dma_map_single);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction direction)
+{
+	unsigned long dampr2;
+	void *vaddr;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	dampr2 = __get_DAMPR(2);
+
+	for (i = 0; i < nents; i++) {
+		vaddr = kmap_atomic_primary(sg_page(&sg[i]), __KM_CACHE);
+
+		frv_dcache_writeback((unsigned long) vaddr,
+				     (unsigned long) vaddr + PAGE_SIZE);
+
+	}
+
+	kunmap_atomic_primary(vaddr, __KM_CACHE);
+	if (dampr2) {
+		__set_DAMPR(2, dampr2);
+		__set_IAMPR(2, dampr2);
+	}
+
+	return nents;
+}
+
+EXPORT_SYMBOL(dma_map_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+			size_t size, enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	flush_dcache_page(page);
+	return (dma_addr_t) page_to_phys(page) + offset;
+}
+
+EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
new file mode 100644
index 00000000..c2812176
--- /dev/null
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -0,0 +1,196 @@
+/* pci-frv.c: low-level PCI access routines
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from the i386 equivalent stuff
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+
+#include "pci-frv.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
+{
+	resource_size_t start = res->start;
+
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	return start;
+}
+
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+	struct list_head *ln;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	int idx;
+	struct resource *r;
+
+	/* Depth-First Search on bus tree */
+	for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
+		bus = pci_bus_b(ln);
+		if ((dev = bus->self)) {
+			for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+				r = &dev->resource[idx];
+				if (!r->start)
+					continue;
+				pci_claim_resource(dev, idx);
+			}
+		}
+		pcibios_allocate_bus_resources(&bus->children);
+	}
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for(idx = 0; idx < 6; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->start)		/* Address not assigned at all */
+				continue;
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled) {
+				DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
+				    r->start, r->end, r->flags, disabled, pass);
+				if (pci_claim_resource(dev, idx) < 0) {
+					/* We'll assign a new address later */
+					r->end -= r->start;
+					r->start = 0;
+				}
+			}
+		}
+		if (!pass) {
+			r = &dev->resource[PCI_ROM_RESOURCE];
+			if (r->flags & IORESOURCE_ROM_ENABLE) {
+				/* Turn the ROM off, leave the resource region, but keep it unregistered. */
+				u32 reg;
+				DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+				pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
+		}
+	}
+}
+
+static void __init pcibios_assign_resources(void)
+{
+	struct pci_dev *dev = NULL;
+	int idx;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		int class = dev->class >> 8;
+
+		/* Don't touch classless devices and host bridges */
+		if (!class || class == PCI_CLASS_BRIDGE_HOST)
+			continue;
+
+		for(idx=0; idx<6; idx++) {
+			r = &dev->resource[idx];
+
+			/*
+			 *  Don't touch IDE controllers and I/O ports of video cards!
+			 */
+			if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
+			    (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
+				continue;
+
+			/*
+			 *  We shall assign a new address to this resource, either because
+			 *  the BIOS forgot to do so or because we have decided the old
+			 *  address was unusable for some reason.
+			 */
+			if (!r->start && r->end)
+				pci_assign_resource(dev, idx);
+		}
+
+		if (pci_probe & PCI_ASSIGN_ROMS) {
+			r = &dev->resource[PCI_ROM_RESOURCE];
+			r->end -= r->start;
+			r->start = 0;
+			if (r->end)
+				pci_assign_resource(dev, PCI_ROM_RESOURCE);
+		}
+	}
+}
+
+void __init pcibios_resource_survey(void)
+{
+	DBG("PCI: Allocating resources\n");
+	pcibios_allocate_bus_resources(&pci_root_buses);
+	pcibios_allocate_resources(0);
+	pcibios_allocate_resources(1);
+	pcibios_assign_resources();
+}
diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h
new file mode 100644
index 00000000..089eeba4
--- /dev/null
+++ b/arch/frv/mb93090-mb00/pci-frv.h
@@ -0,0 +1,42 @@
+/*
+ *	Low-Level PCI Access for FRV machines.
+ *
+ *	(c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#include <asm/sections.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS		0x0001
+#define PCI_PROBE_CONF1		0x0002
+#define PCI_PROBE_CONF2		0x0004
+#define PCI_NO_CHECKS		0x0400
+#define PCI_ASSIGN_ROMS		0x1000
+#define PCI_BIOS_IRQ_SCAN	0x2000
+#define PCI_ASSIGN_ALL_BUSSES	0x4000
+
+extern unsigned int __nongpreldata pci_probe;
+
+/* pci-frv.c */
+
+void pcibios_resource_survey(void);
+
+/* pci-vdk.c */
+
+extern int __nongpreldata pcibios_last_bus;
+extern struct pci_bus *__nongpreldata pci_root_bus;
+extern struct pci_ops *__nongpreldata pci_root_ops;
+
+/* pci-irq.c */
+extern unsigned int pcibios_irq_mask;
+
+void pcibios_irq_init(void);
+void pcibios_fixup_irqs(void);
+void pcibios_enable_irq(struct pci_dev *dev);
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
new file mode 100644
index 00000000..20f6497b
--- /dev/null
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -0,0 +1,65 @@
+/* pci-irq.c: PCI IRQ routing on the FRV motherboard
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * derived from: arch/i386/kernel/pci-irq.c: (c) 1999--2000 Martin Mares <mj@suse.cz>
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+
+#include "pci-frv.h"
+
+/*
+ *	DEVICE	DEVNO	INT#A	INT#B	INT#C	INT#D
+ *	=======	=======	=======	=======	=======	=======
+ *	MB86943	0	fpga.10	-	-	-
+ *	RTL8029	16	fpga.12	-	-	-
+ *	SLOT 1	19	fpga.6	fpga.5	fpga.4	fpga.3
+ *	SLOT 2	18	fpga.5	fpga.4	fpga.3	fpga.6
+ *	SLOT 3	17	fpga.4	fpga.3	fpga.6	fpga.5
+ *
+ */
+
+static const uint8_t __initdata pci_bus0_irq_routing[32][4] = {
+	[0 ] = { IRQ_FPGA_MB86943_PCI_INTA },
+	[16] = { IRQ_FPGA_RTL8029_INTA },
+	[17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB },
+	[18] = { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA },
+	[19] = { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD },
+};
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+	struct pci_dev *dev = NULL;
+	uint8_t line, pin;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+		if (pin) {
+			dev->irq = pci_bus0_irq_routing[PCI_SLOT(dev->devfn)][pin - 1];
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+		}
+		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+	}
+}
+
+void __init pcibios_penalize_isa_irq(int irq)
+{
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
new file mode 100644
index 00000000..6b0b82ff
--- /dev/null
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -0,0 +1,455 @@
+/* pci-vdk.c: MB93090-MB00 (VDK) PCI support
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/mb-regs.h>
+#include <asm/mb86943a.h>
+#include "pci-frv.h"
+
+unsigned int __nongpreldata pci_probe = 1;
+
+int  __nongpreldata pcibios_last_bus = -1;
+struct pci_bus *__nongpreldata pci_root_bus;
+struct pci_ops *__nongpreldata pci_root_ops;
+
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+	.name	= "PCI IO",
+	.start	= 0,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+	.name	= "PCI mem",
+	.start	= 0,
+	.end	= -1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, dev, where) \
+	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)
+
+#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
+#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
+#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)
+
+#define __set_PciCfgDataB(A,V) \
+	writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3)))
+
+#define __set_PciCfgDataW(A,V) \
+	writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2)))
+
+#define __set_PciCfgDataL(A,V) \
+	writel((V), (volatile void __iomem *) __region_CS1 + 0x88)
+
+#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+
+#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+
+static inline int __query(const struct pci_dev *dev)
+{
+//	return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
+//	return dev->bus->number==1;
+//	return dev->bus->number==0 &&
+//		(dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
+	return 0;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+			       u32 *val)
+{
+	u32 _value;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		_value = __get_PciBridgeDataL(where & ~3);
+	}
+	else {
+		__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+		_value = __get_PciCfgDataL(where & ~3);
+	}
+
+	switch (size) {
+	case 1:
+		_value = _value >> ((where & 3) * 8);
+		break;
+
+	case 2:
+		_value = _value >> ((where & 2) * 8);
+		break;
+
+	case 4:
+		break;
+
+	default:
+		BUG();
+	}
+
+	*val = _value;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+				u32 value)
+{
+	switch (size) {
+	case 1:
+		if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+			__set_PciBridgeDataB(where, value);
+		}
+		else {
+			__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+			__set_PciCfgDataB(where, value);
+		}
+		break;
+
+	case 2:
+		if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+			__set_PciBridgeDataW(where, value);
+		}
+		else {
+			__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+			__set_PciCfgDataW(where, value);
+		}
+		break;
+
+	case 4:
+		if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+			__set_PciBridgeDataL(where, value);
+		}
+		else {
+			__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+			__set_PciCfgDataL(where, value);
+		}
+		break;
+
+	default:
+		BUG();
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_direct_frv = {
+	pci_frv_read_config,
+	pci_frv_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+	struct pci_bus bus;		/* Fake bus and device */
+	u32 id;
+
+	bus.number	= 0;
+
+	if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
+		printk("PCI: VDK Bridge device:vendor: %08x\n", id);
+		if (id == 0x200e10cf)
+			return 1;
+	}
+
+	printk("PCI: VDK Bridge: Sanity check failed\n");
+	return 0;
+}
+
+static struct pci_ops * __init pci_check_direct(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* check if access works */
+	if (pci_sanity_check(&pci_direct_frv)) {
+		local_irq_restore(flags);
+		printk("PCI: Using configuration frv\n");
+//		request_mem_region(0xBE040000, 256, "FRV bridge");
+//		request_mem_region(0xBFFFFFF4, 12, "PCI frv");
+		return &pci_direct_frv;
+	}
+
+	local_irq_restore(flags);
+	return NULL;
+}
+
+/*
+ * Discover remaining PCI buses in case there are peer host bridges.
+ * We use the number of last PCI bus provided by the PCI BIOS.
+ */
+static void __init pcibios_fixup_peer_bridges(void)
+{
+	struct pci_bus bus;
+	struct pci_dev dev;
+	int n;
+	u16 l;
+
+	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+		return;
+	printk("PCI: Peer bridge fixup\n");
+	for (n=0; n <= pcibios_last_bus; n++) {
+		if (pci_find_bus(0, n))
+			continue;
+		bus.number = n;
+		bus.ops = pci_root_ops;
+		dev.bus = &bus;
+		for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
+			if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
+			    l != 0x0000 && l != 0xffff) {
+				printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
+				printk("PCI: Discovered peer bus %02x\n", n);
+				pci_scan_bus(n, pci_root_ops, NULL);
+				break;
+			}
+	}
+}
+
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+static void __init pci_fixup_umc_ide(struct pci_dev *d)
+{
+	/*
+	 * UM8886BF IDE controller sets region type bits incorrectly,
+	 * therefore they look like memory despite of them being I/O.
+	 */
+	int i;
+
+	printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
+	for(i=0; i<4; i++)
+		d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
+	 */
+	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+	printk("PCI: IDE base address fixup for %s\n", pci_name(d));
+	for(i=0; i<4; i++) {
+		struct resource *r = &d->resource[i];
+		if ((r->start & ~0x80) == 0x374) {
+			r->start |= 2;
+			r->end = r->start;
+		}
+	}
+}
+
+static void __init pci_fixup_ide_trash(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * There exist PCI IDE controllers which have utter garbage
+	 * in first four base registers. Ignore that.
+	 */
+	printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
+	for(i=0; i<4; i++)
+		d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
+}
+
+static void __devinit  pci_fixup_latency(struct pci_dev *d)
+{
+	/*
+	 *  SiS 5597 and 5598 chipsets require latency timer set to
+	 *  at most 32 to avoid lockups.
+	 */
+	DBG("PCI: Setting max latency to 32\n");
+	pcibios_max_latency = 32;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+#if 0
+	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
+#endif
+
+	pci_read_bridge_bases(bus);
+
+	if (bus->number == 0) {
+		struct list_head *ln;
+		struct pci_dev *dev;
+		for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+			dev = pci_dev_b(ln);
+			if (dev->devfn == 0) {
+				dev->resource[0].start = 0;
+				dev->resource[0].end = 0;
+			}
+		}
+	}
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+
+int __init pcibios_init(void)
+{
+	struct pci_ops *dir = NULL;
+	LIST_HEAD(resources);
+
+	if (!mb93090_mb00_detected)
+		return -ENXIO;
+
+	__reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;
+
+	__reg_MB86943_ecs_base(1)	= ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
+	__reg_MB86943_ecs_base(2)	= ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;
+
+	*(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
+	*(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;
+
+	__reg_MB86943_sl_pci_io_base	= (__region_CS2 + 0x04000000) >> 9;
+	__reg_MB86943_sl_pci_mem_base	= (__region_CS2 + 0x08000000) >> 9;
+	__reg_MB86943_pci_sl_io_base	= __region_CS2 + 0x04000000;
+	__reg_MB86943_pci_sl_mem_base	= __region_CS2 + 0x08000000;
+	mb();
+
+	/* enable PCI arbitration */
+	__reg_MB86943_pci_arbiter	= MB86943_PCIARB_EN;
+
+	pci_ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+	pci_ioport_resource.end		= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+	pci_ioport_resource.end		+= pci_ioport_resource.start;
+
+	printk("PCI IO window:  %08llx-%08llx\n",
+	       (unsigned long long) pci_ioport_resource.start,
+	       (unsigned long long) pci_ioport_resource.end);
+
+	pci_iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.end		= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+	pci_iomem_resource.end		+= pci_iomem_resource.start;
+
+	/* Reserve somewhere to write to flush posted writes.  This is used by
+	 * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+	 * CPU-PCI bridge to flush as this doesn't happen automatically when a
+	 * read is performed on the MB93090 development kit motherboard.
+	 */
+	pci_iomem_resource.start	+= 0x400;
+
+	printk("PCI MEM window: %08llx-%08llx\n",
+	       (unsigned long long) pci_iomem_resource.start,
+	       (unsigned long long) pci_iomem_resource.end);
+	printk("PCI DMA memory: %08lx-%08lx\n",
+	       dma_coherent_mem_start, dma_coherent_mem_end);
+
+	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+		panic("Unable to insert PCI IOMEM resource\n");
+	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+		panic("Unable to insert PCI IOPORT resource\n");
+
+	if (!pci_probe)
+		return -ENXIO;
+
+	dir = pci_check_direct();
+	if (dir)
+		pci_root_ops = dir;
+	else {
+		printk("PCI: No PCI bus detected\n");
+		return -ENXIO;
+	}
+
+	printk("PCI: Probing PCI hardware\n");
+	pci_add_resource(&resources, &pci_ioport_resource);
+	pci_add_resource(&resources, &pci_iomem_resource);
+	pci_root_bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL,
+					 &resources);
+
+	pcibios_irq_init();
+	pcibios_fixup_peer_bridges();
+	pcibios_fixup_irqs();
+	pcibios_resource_survey();
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char * __init pcibios_setup(char *str)
+{
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	} else if (!strncmp(str, "lastbus=", 8)) {
+		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+		return NULL;
+	}
+	return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int err;
+
+	if ((err = pci_enable_resources(dev, mask)) < 0)
+		return err;
+	if (!dev->msi_enabled)
+		pcibios_enable_irq(dev);
+	return 0;
+}
diff --git a/arch/frv/mm/Makefile b/arch/frv/mm/Makefile
new file mode 100644
index 00000000..1bca5ab8
--- /dev/null
+++ b/arch/frv/mm/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the arch-specific parts of the memory manager.
+#
+
+obj-y := init.o kmap.o
+
+obj-$(CONFIG_MMU) += \
+	pgalloc.o highmem.o fault.o extable.o cache-page.o tlb-flush.o tlb-miss.o \
+	mmu-context.o dma-alloc.o elf-fdpic.o
diff --git a/arch/frv/mm/cache-page.c b/arch/frv/mm/cache-page.c
new file mode 100644
index 00000000..b24ade27
--- /dev/null
+++ b/arch/frv/mm/cache-page.c
@@ -0,0 +1,71 @@
+/* cache-page.c: whole-page cache wrangling functions for MMU linux
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/pgalloc.h>
+
+/*****************************************************************************/
+/*
+ * DCF takes a virtual address and the page may not currently have one
+ * - temporarily hijack a kmap_atomic() slot and attach the page to it
+ */
+void flush_dcache_page(struct page *page)
+{
+	unsigned long dampr2;
+	void *vaddr;
+
+	dampr2 = __get_DAMPR(2);
+
+	vaddr = kmap_atomic_primary(page, __KM_CACHE);
+
+	frv_dcache_writeback((unsigned long) vaddr, (unsigned long) vaddr + PAGE_SIZE);
+
+	kunmap_atomic_primary(vaddr, __KM_CACHE);
+
+	if (dampr2) {
+		__set_DAMPR(2, dampr2);
+		__set_IAMPR(2, dampr2);
+	}
+
+} /* end flush_dcache_page() */
+
+EXPORT_SYMBOL(flush_dcache_page);
+
+/*****************************************************************************/
+/*
+ * ICI takes a virtual address and the page may not currently have one
+ * - so we temporarily attach the page to a bit of virtual space so that is can be flushed
+ */
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			     unsigned long start, unsigned long len)
+{
+	unsigned long dampr2;
+	void *vaddr;
+
+	dampr2 = __get_DAMPR(2);
+
+	vaddr = kmap_atomic_primary(page, __KM_CACHE);
+
+	start = (start & ~PAGE_MASK) | (unsigned long) vaddr;
+	frv_cache_wback_inv(start, start + len);
+
+	kunmap_atomic_primary(vaddr, __KM_CACHE);
+
+	if (dampr2) {
+		__set_DAMPR(2, dampr2);
+		__set_IAMPR(2, dampr2);
+	}
+
+} /* end flush_icache_user_range() */
+
+EXPORT_SYMBOL(flush_icache_user_range);
diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c
new file mode 100644
index 00000000..7a73aaea
--- /dev/null
+++ b/arch/frv/mm/dma-alloc.c
@@ -0,0 +1,183 @@
+/* dma-alloc.c: consistent DMA memory allocation
+ *
+ * Derived from arch/ppc/mm/cachemap.c
+ *
+ *  PowerPC version derived from arch/arm/mm/consistent.c
+ *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ *  linux/arch/arm/mm/consistent.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators.  Used for DMA devices that want to
+ * share uncached memory with the processor core.  The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ *						-- Dan
+ * Modified for 36-bit support.  -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/hardirq.h>
+#include <linux/gfp.h>
+
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+
+static int map_page(unsigned long va, unsigned long pa, pgprot_t prot)
+{
+	pgd_t *pge;
+	pud_t *pue;
+	pmd_t *pme;
+	pte_t *pte;
+	int err = -ENOMEM;
+
+	/* Use upper 10 bits of VA to index the first level map */
+	pge = pgd_offset_k(va);
+	pue = pud_offset(pge, va);
+	pme = pmd_offset(pue, va);
+
+	/* Use middle 10 bits of VA to index the second-level map */
+	pte = pte_alloc_kernel(pme, va);
+	if (pte != 0) {
+		err = 0;
+		set_pte(pte, mk_pte_phys(pa & PAGE_MASK, prot));
+	}
+
+	return err;
+}
+
+/*
+ * This function will allocate the requested contiguous pages and
+ * map them into the kernel's vmalloc() space.  This is done so we
+ * get unique mapping for these pages, outside of the kernel's 1:1
+ * virtual:physical mapping.  This is necessary so we can cover large
+ * portions of the kernel with single large page TLB entries, and
+ * still get unique uncached pages for consistent DMA.
+ */
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
+{
+	struct vm_struct *area;
+	unsigned long page, va, pa;
+	void *ret;
+	int order, err, i;
+
+	if (in_interrupt())
+		BUG();
+
+	/* only allocate page size areas */
+	size = PAGE_ALIGN(size);
+	order = get_order(size);
+
+	page = __get_free_pages(gfp, order);
+	if (!page) {
+		BUG();
+		return NULL;
+	}
+
+	/* allocate some common virtual space to map the new pages */
+	area = get_vm_area(size, VM_ALLOC);
+	if (area == 0) {
+		free_pages(page, order);
+		return NULL;
+	}
+	va = VMALLOC_VMADDR(area->addr);
+	ret = (void *) va;
+
+	/* this gives us the real physical address of the first page */
+	*dma_handle = pa = virt_to_bus((void *) page);
+
+	/* set refcount=1 on all pages in an order>0 allocation so that vfree() will actually free
+	 * all pages that were allocated.
+	 */
+	if (order > 0) {
+		struct page *rpage = virt_to_page(page);
+		split_page(rpage, order);
+	}
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(va + i, pa + i, PAGE_KERNEL_NOCACHE);
+
+	if (err) {
+		vfree((void *) va);
+		return NULL;
+	}
+
+	/* we need to ensure that there are no cachelines in use, or worse dirty in this area
+	 * - can't do until after virtual address mappings are created
+	 */
+	frv_cache_invalidate(va, va + size);
+
+	return ret;
+}
+
+/*
+ * free page(s) as defined by the above mapping.
+ */
+void consistent_free(void *vaddr)
+{
+	if (in_interrupt())
+		BUG();
+	vfree(vaddr);
+}
+
+/*
+ * make an area consistent.
+ */
+void consistent_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start = (unsigned long) vaddr;
+	unsigned long end   = start + size;
+
+	switch (direction) {
+	case PCI_DMA_NONE:
+		BUG();
+	case PCI_DMA_FROMDEVICE:	/* invalidate only */
+		frv_cache_invalidate(start, end);
+		break;
+	case PCI_DMA_TODEVICE:		/* writeback only */
+		frv_dcache_writeback(start, end);
+		break;
+	case PCI_DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		frv_dcache_writeback(start, end);
+		break;
+	}
+}
+
+/*
+ * consistent_sync_page make a page are consistent. identical
+ * to consistent_sync, but takes a struct page instead of a virtual address
+ */
+
+void consistent_sync_page(struct page *page, unsigned long offset,
+			  size_t size, int direction)
+{
+	void *start;
+
+	start = page_address(page) + offset;
+	consistent_sync(start, size, direction);
+}
diff --git a/arch/frv/mm/elf-fdpic.c b/arch/frv/mm/elf-fdpic.c
new file mode 100644
index 00000000..385fd30b
--- /dev/null
+++ b/arch/frv/mm/elf-fdpic.c
@@ -0,0 +1,128 @@
+/* elf-fdpic.c: ELF FDPIC memory layout management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/elf-fdpic.h>
+#include <asm/mman.h>
+
+/*****************************************************************************/
+/*
+ * lay out the userspace VM according to our grand design
+ */
+#ifdef CONFIG_MMU
+void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+			       struct elf_fdpic_params *interp_params,
+			       unsigned long *start_stack,
+			       unsigned long *start_brk)
+{
+	*start_stack = 0x02200000UL;
+
+	/* if the only executable is a shared object, assume that it is an interpreter rather than
+	 * a true executable, and map it such that "ld.so --list" comes out right
+	 */
+	if (!(interp_params->flags & ELF_FDPIC_FLAG_PRESENT) &&
+	    exec_params->hdr.e_type != ET_EXEC
+	    ) {
+		exec_params->load_addr = PAGE_SIZE;
+
+		*start_brk = 0x80000000UL;
+	}
+	else {
+		exec_params->load_addr = 0x02200000UL;
+
+		if ((exec_params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) ==
+		    ELF_FDPIC_FLAG_INDEPENDENT
+		    ) {
+			exec_params->flags &= ~ELF_FDPIC_FLAG_ARRANGEMENT;
+			exec_params->flags |= ELF_FDPIC_FLAG_CONSTDISP;
+		}
+	}
+
+} /* end elf_fdpic_arch_lay_out_mm() */
+#endif
+
+/*****************************************************************************/
+/*
+ * place non-fixed mmaps firstly in the bottom part of memory, working up, and then in the top part
+ * of memory, working down
+ */
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len,
+				     unsigned long pgoff, unsigned long flags)
+{
+	struct vm_area_struct *vma;
+	unsigned long limit;
+
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	/* handle MAP_FIXED */
+	if (flags & MAP_FIXED)
+		return addr;
+
+	/* only honour a hint if we're not going to clobber something doing so */
+	if (addr) {
+		addr = PAGE_ALIGN(addr);
+		vma = find_vma(current->mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vma->vm_start))
+			goto success;
+	}
+
+	/* search between the bottom of user VM and the stack grow area */
+	addr = PAGE_SIZE;
+	limit = (current->mm->start_stack - 0x00200000);
+	if (addr + len <= limit) {
+		limit -= len;
+
+		if (addr <= limit) {
+			vma = find_vma(current->mm, PAGE_SIZE);
+			for (; vma; vma = vma->vm_next) {
+				if (addr > limit)
+					break;
+				if (addr + len <= vma->vm_start)
+					goto success;
+				addr = vma->vm_end;
+			}
+		}
+	}
+
+	/* search from just above the WorkRAM area to the top of memory */
+	addr = PAGE_ALIGN(0x80000000);
+	limit = TASK_SIZE - len;
+	if (addr <= limit) {
+		vma = find_vma(current->mm, addr);
+		for (; vma; vma = vma->vm_next) {
+			if (addr > limit)
+				break;
+			if (addr + len <= vma->vm_start)
+				goto success;
+			addr = vma->vm_end;
+		}
+
+		if (!vma && addr <= limit)
+			goto success;
+	}
+
+#if 0
+	printk("[area] l=%lx (ENOMEM) f='%s'\n",
+	       len, filp ? filp->f_path.dentry->d_name.name : "");
+#endif
+	return -ENOMEM;
+
+ success:
+#if 0
+	printk("[area] l=%lx ad=%lx f='%s'\n",
+	       len, addr, filp ? filp->f_path.dentry->d_name.name : "");
+#endif
+	return addr;
+} /* end arch_get_unmapped_area() */
diff --git a/arch/frv/mm/extable.c b/arch/frv/mm/extable.c
new file mode 100644
index 00000000..6aea124f
--- /dev/null
+++ b/arch/frv/mm/extable.c
@@ -0,0 +1,74 @@
+/*
+ * linux/arch/frv/mm/extable.c
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+extern const struct exception_table_entry __attribute__((aligned(8))) __start___ex_table[];
+extern const struct exception_table_entry __attribute__((aligned(8))) __stop___ex_table[];
+extern const void __memset_end, __memset_user_error_lr, __memset_user_error_handler;
+extern const void __memcpy_end, __memcpy_user_error_lr, __memcpy_user_error_handler;
+extern spinlock_t modlist_lock;
+
+/*****************************************************************************/
+/*
+ *
+ */
+static inline unsigned long search_one_table(const struct exception_table_entry *first,
+					     const struct exception_table_entry *last,
+					     unsigned long value)
+{
+        while (first <= last) {
+		const struct exception_table_entry __attribute__((aligned(8))) *mid;
+		long diff;
+
+		mid = (last - first) / 2 + first;
+		diff = mid->insn - value;
+                if (diff == 0)
+                        return mid->fixup;
+                else if (diff < 0)
+                        first = mid + 1;
+                else
+                        last = mid - 1;
+        }
+        return 0;
+} /* end search_one_table() */
+
+/*****************************************************************************/
+/*
+ * see if there's a fixup handler available to deal with a kernel fault
+ */
+unsigned long search_exception_table(unsigned long pc)
+{
+	const struct exception_table_entry *extab;
+
+	/* determine if the fault lay during a memcpy_user or a memset_user */
+	if (__frame->lr == (unsigned long) &__memset_user_error_lr &&
+	    (unsigned long) &memset <= pc && pc < (unsigned long) &__memset_end
+	    ) {
+		/* the fault occurred in a protected memset
+		 * - we search for the return address (in LR) instead of the program counter
+		 * - it was probably during a clear_user()
+		 */
+		return (unsigned long) &__memset_user_error_handler;
+	}
+
+	if (__frame->lr == (unsigned long) &__memcpy_user_error_lr &&
+	    (unsigned long) &memcpy <= pc && pc < (unsigned long) &__memcpy_end
+	    ) {
+		/* the fault occurred in a protected memset
+		 * - we search for the return address (in LR) instead of the program counter
+		 * - it was probably during a copy_to/from_user()
+		 */
+		return (unsigned long) &__memcpy_user_error_handler;
+	}
+
+	extab = search_exception_tables(pc);
+	if (extab)
+		return extab->fixup;
+
+	return 0;
+
+} /* end search_exception_table() */
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
new file mode 100644
index 00000000..331c1e2c
--- /dev/null
+++ b/arch/frv/mm/fault.c
@@ -0,0 +1,325 @@
+/*
+ *  linux/arch/frv/mm/fault.c
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * - Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68knommu/mm/fault.c
+ *   - Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
+ *   - Copyright (C) 2000  Lineo, Inc.  (www.lineo.com)
+ *
+ *  Based on:
+ *
+ *  linux/arch/m68k/mm/fault.c
+ *
+ *  Copyright (C) 1995  Hamish Macdonald
+ */
+
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/gdb-stub.h>
+
+/*****************************************************************************/
+/*
+ * This routine handles page faults.  It determines the problem, and
+ * then passes it off to one of the appropriate routines.
+ */
+asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear0)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm;
+	unsigned long _pme, lrai, lrad, fixup;
+	siginfo_t info;
+	pgd_t *pge;
+	pud_t *pue;
+	pte_t *pte;
+	int write;
+	int fault;
+
+#if 0
+	const char *atxc[16] = {
+		[0x0] = "mmu-miss", [0x8] = "multi-dat", [0x9] = "multi-sat",
+		[0xa] = "tlb-miss", [0xc] = "privilege", [0xd] = "write-prot",
+	};
+
+	printk("do_page_fault(%d,%lx [%s],%lx)\n",
+	       datammu, esr0, atxc[esr0 >> 20 & 0xf], ear0);
+#endif
+
+	mm = current->mm;
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 *
+	 * This verifies that the fault happens in kernel space
+	 * and that the fault was a page not present (invalid) error
+	 */
+	if (!user_mode(__frame) && (esr0 & ESR0_ATXC) == ESR0_ATXC_AMRTLB_MISS) {
+		if (ear0 >= VMALLOC_START && ear0 < VMALLOC_END)
+			goto kernel_pte_fault;
+		if (ear0 >= PKMAP_BASE && ear0 < PKMAP_END)
+			goto kernel_pte_fault;
+	}
+
+	info.si_code = SEGV_MAPERR;
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+	if (in_atomic() || !mm)
+		goto no_context;
+
+	down_read(&mm->mmap_sem);
+
+	vma = find_vma(mm, ear0);
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= ear0)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (user_mode(__frame)) {
+		/*
+		 * accessing the stack below %esp is always a bug.
+		 * The "+ 32" is there due to some instructions (like
+		 * pusha) doing post-decrement on the stack and that
+		 * doesn't show up until later..
+		 */
+		if ((ear0 & PAGE_MASK) + 2 * PAGE_SIZE < __frame->sp) {
+#if 0
+			printk("[%d] ### Access below stack @%lx (sp=%lx)\n",
+			       current->pid, ear0, __frame->sp);
+			show_registers(__frame);
+			printk("[%d] ### Code: [%08lx] %02x %02x %02x %02x %02x %02x %02x %02x\n",
+			       current->pid,
+			       __frame->pc,
+			       ((u8*)__frame->pc)[0],
+			       ((u8*)__frame->pc)[1],
+			       ((u8*)__frame->pc)[2],
+			       ((u8*)__frame->pc)[3],
+			       ((u8*)__frame->pc)[4],
+			       ((u8*)__frame->pc)[5],
+			       ((u8*)__frame->pc)[6],
+			       ((u8*)__frame->pc)[7]
+			       );
+#endif
+			goto bad_area;
+		}
+	}
+
+	if (expand_stack(vma, ear0))
+		goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+ good_area:
+	info.si_code = SEGV_ACCERR;
+	write = 0;
+	switch (esr0 & ESR0_ATXC) {
+	default:
+		/* handle write to write protected page */
+	case ESR0_ATXC_WP_EXCEP:
+#ifdef TEST_VERIFY_AREA
+		if (!(user_mode(__frame)))
+			printk("WP fault at %08lx\n", __frame->pc);
+#endif
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+		write = 1;
+		break;
+
+		 /* handle read from protected page */
+	case ESR0_ATXC_PRIV_EXCEP:
+		goto bad_area;
+
+		 /* handle read, write or exec on absent page
+		  * - can't support write without permitting read
+		  * - don't support execute without permitting read and vice-versa
+		  */
+	case ESR0_ATXC_AMRTLB_MISS:
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+			goto bad_area;
+		break;
+	}
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+	fault = handle_mm_fault(mm, vma, ear0, write ? FAULT_FLAG_WRITE : 0);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		current->maj_flt++;
+	else
+		current->min_flt++;
+
+	up_read(&mm->mmap_sem);
+	return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+ bad_area:
+	up_read(&mm->mmap_sem);
+
+	/* User mode accesses just cause a SIGSEGV */
+	if (user_mode(__frame)) {
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void *) ear0;
+		force_sig_info(SIGSEGV, &info, current);
+		return;
+	}
+
+ no_context:
+	/* are we prepared to handle this kernel fault? */
+	if ((fixup = search_exception_table(__frame->pc)) != 0) {
+		__frame->pc = fixup;
+		return;
+	}
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+	bust_spinlocks(1);
+
+	if (ear0 < PAGE_SIZE)
+		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+	else
+		printk(KERN_ALERT "Unable to handle kernel paging request");
+	printk(" at virtual addr %08lx\n", ear0);
+	printk("  PC  : %08lx\n", __frame->pc);
+	printk("  EXC : esr0=%08lx ear0=%08lx\n", esr0, ear0);
+
+	asm("lrai %1,%0,#1,#0,#0" : "=&r"(lrai) : "r"(ear0));
+	asm("lrad %1,%0,#1,#0,#0" : "=&r"(lrad) : "r"(ear0));
+
+	printk(KERN_ALERT "  LRAI: %08lx\n", lrai);
+	printk(KERN_ALERT "  LRAD: %08lx\n", lrad);
+
+	__break_hijack_kernel_event();
+
+	pge = pgd_offset(current->mm, ear0);
+	pue = pud_offset(pge, ear0);
+	_pme = pue->pue[0].ste[0];
+
+	printk(KERN_ALERT "  PGE : %8p { PME %08lx }\n", pge, _pme);
+
+	if (_pme & xAMPRx_V) {
+		unsigned long dampr, damlr, val;
+
+		asm volatile("movsg dampr2,%0 ! movgs %2,dampr2 ! movsg damlr2,%1"
+			     : "=&r"(dampr), "=r"(damlr)
+			     : "r" (_pme | xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V)
+			     );
+
+		pte = (pte_t *) damlr + __pte_index(ear0);
+		val = pte_val(*pte);
+
+		asm volatile("movgs %0,dampr2" :: "r" (dampr));
+
+		printk(KERN_ALERT "  PTE : %8p { %08lx }\n", pte, val);
+	}
+
+	die_if_kernel("Oops\n");
+	do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+ out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (!user_mode(__frame))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
+
+ do_sigbus:
+	up_read(&mm->mmap_sem);
+
+	/*
+	 * Send a sigbus, regardless of whether we were in kernel
+	 * or user mode.
+	 */
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void *) ear0;
+	force_sig_info(SIGBUS, &info, current);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(__frame))
+		goto no_context;
+	return;
+
+/*
+ * The fault was caused by a kernel PTE (such as installed by vmalloc or kmap)
+ */
+ kernel_pte_fault:
+	{
+		/*
+		 * Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 *
+		 * Do _not_ use "tsk" here. We might be inside
+		 * an interrupt in the middle of a task switch..
+		 */
+		int index = pgd_index(ear0);
+		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+		pgd = (pgd_t *) __get_TTBR();
+		pgd = (pgd_t *)__va(pgd) + index;
+		pgd_k = ((pgd_t *)(init_mm.pgd)) + index;
+
+		if (!pgd_present(*pgd_k))
+			goto no_context;
+		//set_pgd(pgd, *pgd_k); /////// gcc ICE's on this line
+
+		pud_k = pud_offset(pgd_k, ear0);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd_k = pmd_offset(pud_k, ear0);
+		if (!pmd_present(*pmd_k))
+			goto no_context;
+
+		pud = pud_offset(pgd, ear0);
+		pmd = pmd_offset(pud, ear0);
+		set_pmd(pmd, *pmd_k);
+
+		pte_k = pte_offset_kernel(pmd_k, ear0);
+		if (!pte_present(*pte_k))
+			goto no_context;
+		return;
+	}
+} /* end do_page_fault() */
diff --git a/arch/frv/mm/highmem.c b/arch/frv/mm/highmem.c
new file mode 100644
index 00000000..31902c9d
--- /dev/null
+++ b/arch/frv/mm/highmem.c
@@ -0,0 +1,89 @@
+/* highmem.c: arch-specific highmem stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+	if (in_interrupt())
+		BUG();
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+EXPORT_SYMBOL(kunmap);
+
+struct page *kmap_atomic_to_page(void *ptr)
+{
+	return virt_to_page(ptr);
+}
+
+void *kmap_atomic(struct page *page)
+{
+	unsigned long paddr;
+	int type;
+
+	pagefault_disable();
+	type = kmap_atomic_idx_push();
+	paddr = page_to_phys(page);
+
+	switch (type) {
+	/*
+	 * The first 4 primary maps are reserved for architecture code
+	 */
+	case 0:		return __kmap_atomic_primary(4, paddr, 6);
+	case 1:		return __kmap_atomic_primary(5, paddr, 7);
+	case 2:		return __kmap_atomic_primary(6, paddr, 8);
+	case 3:		return __kmap_atomic_primary(7, paddr, 9);
+	case 4:		return __kmap_atomic_primary(8, paddr, 10);
+
+	case 5 ... 5 + NR_TLB_LINES - 1:
+		return __kmap_atomic_secondary(type - 5, paddr);
+
+	default:
+		BUG();
+		return NULL;
+	}
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void __kunmap_atomic(void *kvaddr)
+{
+	int type = kmap_atomic_idx();
+	switch (type) {
+	case 0:		__kunmap_atomic_primary(4, 6);	break;
+	case 1:		__kunmap_atomic_primary(5, 7);	break;
+	case 2:		__kunmap_atomic_primary(6, 8);	break;
+	case 3:		__kunmap_atomic_primary(7, 9);	break;
+	case 4:		__kunmap_atomic_primary(8, 10);	break;
+
+	case 5 ... 5 + NR_TLB_LINES - 1:
+		__kunmap_atomic_secondary(type - 5, kvaddr);
+		break;
+
+	default:
+		BUG();
+	}
+	kmap_atomic_idx_pop();
+	pagefault_enable();
+}
+EXPORT_SYMBOL(__kunmap_atomic);
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
new file mode 100644
index 00000000..a19effcc
--- /dev/null
+++ b/arch/frv/mm/init.c
@@ -0,0 +1,206 @@
+/* init.c: memory initialisation for FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *  - linux/arch/m68knommu/mm/init.c
+ *    - Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>,
+ *    - Copyright (C) 2000  Lineo, Inc.  (www.lineo.com)
+ *  - linux/arch/m68k/mm/init.c
+ *    - Copyright (C) 1995  Hamish Macdonald
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/gfp.h>
+#include <linux/swap.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
+#include <asm/virtconvert.h>
+#include <asm/sections.h>
+#include <asm/tlb.h>
+
+#undef DEBUG
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving a inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+static unsigned long empty_bad_page_table;
+static unsigned long empty_bad_page;
+
+unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
+/*****************************************************************************/
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses  of available kernel virtual memory.
+ */
+void __init paging_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+	/* allocate some pages for kernel housekeeping tasks */
+	empty_bad_page_table	= (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+	empty_bad_page		= (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+	empty_zero_page		= (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+
+	memset((void *) empty_zero_page, 0, PAGE_SIZE);
+
+#ifdef CONFIG_HIGHMEM
+	if (num_physpages - num_mappedpages) {
+		pgd_t *pge;
+		pud_t *pue;
+		pmd_t *pme;
+
+		pkmap_page_table = alloc_bootmem_pages(PAGE_SIZE);
+
+		pge = swapper_pg_dir + pgd_index_k(PKMAP_BASE);
+		pue = pud_offset(pge, PKMAP_BASE);
+		pme = pmd_offset(pue, PKMAP_BASE);
+		__set_pmd(pme, virt_to_phys(pkmap_page_table) | _PAGE_TABLE);
+	}
+#endif
+
+	/* distribute the allocatable pages across the various zones and pass them to the allocator
+	 */
+	zones_size[ZONE_NORMAL]  = max_low_pfn - min_low_pfn;
+#ifdef CONFIG_HIGHMEM
+	zones_size[ZONE_HIGHMEM] = num_physpages - num_mappedpages;
+#endif
+
+	free_area_init(zones_size);
+
+#ifdef CONFIG_MMU
+	/* initialise init's MMU context */
+	init_new_context(&init_task, &init_mm);
+#endif
+
+} /* end paging_init() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+void __init mem_init(void)
+{
+	unsigned long npages = (memory_end - memory_start) >> PAGE_SHIFT;
+	unsigned long tmp;
+#ifdef CONFIG_MMU
+	unsigned long loop, pfn;
+	int datapages = 0;
+#endif
+	int codek = 0, datak = 0;
+
+	/* this will put all memory onto the freelists */
+	totalram_pages = free_all_bootmem();
+
+#ifdef CONFIG_MMU
+	for (loop = 0 ; loop < npages ; loop++)
+		if (PageReserved(&mem_map[loop]))
+			datapages++;
+
+#ifdef CONFIG_HIGHMEM
+	for (pfn = num_physpages - 1; pfn >= num_mappedpages; pfn--) {
+		struct page *page = &mem_map[pfn];
+
+		ClearPageReserved(page);
+		init_page_count(page);
+		__free_page(page);
+		totalram_pages++;
+	}
+#endif
+
+	codek = ((unsigned long) &_etext - (unsigned long) &_stext) >> 10;
+	datak = datapages << (PAGE_SHIFT - 10);
+
+#else
+	codek = (_etext - _stext) >> 10;
+	datak = 0; //(_ebss - _sdata) >> 10;
+#endif
+
+	tmp = nr_free_pages() << PAGE_SHIFT;
+	printk("Memory available: %luKiB/%luKiB RAM, %luKiB/%luKiB ROM (%dKiB kernel code, %dKiB data)\n",
+	       tmp >> 10,
+	       npages << (PAGE_SHIFT - 10),
+	       (rom_length > 0) ? ((rom_length >> 10) - codek) : 0,
+	       rom_length >> 10,
+	       codek,
+	       datak
+	       );
+
+} /* end mem_init() */
+
+/*****************************************************************************/
+/*
+ * free the memory that was only required for initialisation
+ */
+void free_initmem(void)
+{
+#if defined(CONFIG_RAMKERNEL) && !defined(CONFIG_PROTECT_KERNEL)
+	unsigned long start, end, addr;
+
+	start = PAGE_ALIGN((unsigned long) &__init_begin);	/* round up */
+	end   = ((unsigned long) &__init_end) & PAGE_MASK;	/* round down */
+
+	/* next to check that the page we free is not a partial page */
+	for (addr = start; addr < end; addr += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(addr));
+		init_page_count(virt_to_page(addr));
+		free_page(addr);
+		totalram_pages++;
+	}
+
+	printk("Freeing unused kernel memory: %ldKiB freed (0x%lx - 0x%lx)\n",
+	       (end - start) >> 10, start, end);
+#endif
+} /* end free_initmem() */
+
+/*****************************************************************************/
+/*
+ * free the initial ramdisk memory
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init free_initrd_mem(unsigned long start, unsigned long end)
+{
+	int pages = 0;
+	for (; start < end; start += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(start));
+		init_page_count(virt_to_page(start));
+		free_page(start);
+		totalram_pages++;
+		pages++;
+	}
+	printk("Freeing initrd memory: %dKiB freed\n", (pages * PAGE_SIZE) >> 10);
+} /* end free_initrd_mem() */
+#endif
diff --git a/arch/frv/mm/kmap.c b/arch/frv/mm/kmap.c
new file mode 100644
index 00000000..e9217e60
--- /dev/null
+++ b/arch/frv/mm/kmap.c
@@ -0,0 +1,51 @@
+/* kmap.c: ioremapping handlers
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/mm/kmap.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+
+#undef DEBUG
+
+/*****************************************************************************/
+/*
+ * Map some physical address range into the kernel address space.
+ */
+
+void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
+{
+	return (void __iomem *)physaddr;
+}
+
+/*
+ * Unmap a ioremap()ed region again
+ */
+void iounmap(void volatile __iomem *addr)
+{
+}
+
+/*
+ * Set new cache mode for some kernel address space.
+ * The caller must push data for that range itself, if such data may already
+ * be in the cache.
+ */
+void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
+{
+}
diff --git a/arch/frv/mm/mmu-context.c b/arch/frv/mm/mmu-context.c
new file mode 100644
index 00000000..81757d55
--- /dev/null
+++ b/arch/frv/mm/mmu-context.c
@@ -0,0 +1,208 @@
+/* mmu-context.c: MMU context allocation and management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/tlbflush.h>
+
+#define NR_CXN	4096
+
+static unsigned long cxn_bitmap[NR_CXN / (sizeof(unsigned long) * 8)];
+static LIST_HEAD(cxn_owners_lru);
+static DEFINE_SPINLOCK(cxn_owners_lock);
+
+int __nongpreldata cxn_pinned = -1;
+
+
+/*****************************************************************************/
+/*
+ * initialise a new context
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	memset(&mm->context, 0, sizeof(mm->context));
+	INIT_LIST_HEAD(&mm->context.id_link);
+	mm->context.itlb_cached_pge = 0xffffffffUL;
+	mm->context.dtlb_cached_pge = 0xffffffffUL;
+
+	return 0;
+} /* end init_new_context() */
+
+/*****************************************************************************/
+/*
+ * make sure a kernel MMU context has a CPU context number
+ * - call with cxn_owners_lock held
+ */
+static unsigned get_cxn(mm_context_t *ctx)
+{
+	struct list_head *_p;
+	mm_context_t *p;
+	unsigned cxn;
+
+	if (!list_empty(&ctx->id_link)) {
+		list_move_tail(&ctx->id_link, &cxn_owners_lru);
+	}
+	else {
+		/* find the first unallocated context number
+		 * - 0 is reserved for the kernel
+		 */
+		cxn = find_next_zero_bit(cxn_bitmap, NR_CXN, 1);
+		if (cxn < NR_CXN) {
+			set_bit(cxn, cxn_bitmap);
+		}
+		else {
+			/* none remaining - need to steal someone else's cxn */
+			p = NULL;
+			list_for_each(_p, &cxn_owners_lru) {
+				p = list_entry(_p, mm_context_t, id_link);
+				if (!p->id_busy && p->id != cxn_pinned)
+					break;
+			}
+
+			BUG_ON(_p == &cxn_owners_lru);
+
+			cxn = p->id;
+			p->id = 0;
+			list_del_init(&p->id_link);
+			__flush_tlb_mm(cxn);
+		}
+
+		ctx->id = cxn;
+		list_add_tail(&ctx->id_link, &cxn_owners_lru);
+	}
+
+	return ctx->id;
+} /* end get_cxn() */
+
+/*****************************************************************************/
+/*
+ * restore the current TLB miss handler mapped page tables into the MMU context and set up a
+ * mapping for the page directory
+ */
+void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *pgd)
+{
+	unsigned long _pgd;
+
+	_pgd = virt_to_phys(pgd);
+
+	/* save the state of the outgoing MMU context */
+	old->id_busy = 0;
+
+	asm volatile("movsg scr0,%0"   : "=r"(old->itlb_cached_pge));
+	asm volatile("movsg dampr4,%0" : "=r"(old->itlb_ptd_mapping));
+	asm volatile("movsg scr1,%0"   : "=r"(old->dtlb_cached_pge));
+	asm volatile("movsg dampr5,%0" : "=r"(old->dtlb_ptd_mapping));
+
+	/* select an MMU context number */
+	spin_lock(&cxn_owners_lock);
+	get_cxn(ctx);
+	ctx->id_busy = 1;
+	spin_unlock(&cxn_owners_lock);
+
+	asm volatile("movgs %0,cxnr"   : : "r"(ctx->id));
+
+	/* restore the state of the incoming MMU context */
+	asm volatile("movgs %0,scr0"   : : "r"(ctx->itlb_cached_pge));
+	asm volatile("movgs %0,dampr4" : : "r"(ctx->itlb_ptd_mapping));
+	asm volatile("movgs %0,scr1"   : : "r"(ctx->dtlb_cached_pge));
+	asm volatile("movgs %0,dampr5" : : "r"(ctx->dtlb_ptd_mapping));
+
+	/* map the PGD into uncached virtual memory */
+	asm volatile("movgs %0,ttbr"   : : "r"(_pgd));
+	asm volatile("movgs %0,dampr3"
+		     :: "r"(_pgd | xAMPRx_L | xAMPRx_M | xAMPRx_SS_16Kb |
+			    xAMPRx_S | xAMPRx_C | xAMPRx_V));
+
+} /* end change_mm_context() */
+
+/*****************************************************************************/
+/*
+ * finished with an MMU context number
+ */
+void destroy_context(struct mm_struct *mm)
+{
+	mm_context_t *ctx = &mm->context;
+
+	spin_lock(&cxn_owners_lock);
+
+	if (!list_empty(&ctx->id_link)) {
+		if (ctx->id == cxn_pinned)
+			cxn_pinned = -1;
+
+		list_del_init(&ctx->id_link);
+		clear_bit(ctx->id, cxn_bitmap);
+		__flush_tlb_mm(ctx->id);
+		ctx->id = 0;
+	}
+
+	spin_unlock(&cxn_owners_lock);
+} /* end destroy_context() */
+
+/*****************************************************************************/
+/*
+ * display the MMU context currently a process is currently using
+ */
+#ifdef CONFIG_PROC_FS
+char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer)
+{
+	spin_lock(&cxn_owners_lock);
+	buffer += sprintf(buffer, "CXNR: %u\n", mm->context.id);
+	spin_unlock(&cxn_owners_lock);
+
+	return buffer;
+} /* end proc_pid_status_frv_cxnr() */
+#endif
+
+/*****************************************************************************/
+/*
+ * (un)pin a process's mm_struct's MMU context ID
+ */
+int cxn_pin_by_pid(pid_t pid)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm = NULL;
+	int ret;
+
+	/* unpin if pid is zero */
+	if (pid == 0) {
+		cxn_pinned = -1;
+		return 0;
+	}
+
+	ret = -ESRCH;
+
+	/* get a handle on the mm_struct */
+	read_lock(&tasklist_lock);
+	tsk = find_task_by_vpid(pid);
+	if (tsk) {
+		ret = -EINVAL;
+
+		task_lock(tsk);
+		if (tsk->mm) {
+			mm = tsk->mm;
+			atomic_inc(&mm->mm_users);
+			ret = 0;
+		}
+		task_unlock(tsk);
+	}
+	read_unlock(&tasklist_lock);
+
+	if (ret < 0)
+		return ret;
+
+	/* make sure it has a CXN and pin it */
+	spin_lock(&cxn_owners_lock);
+	cxn_pinned = get_cxn(&mm->context);
+	spin_unlock(&cxn_owners_lock);
+
+	mmput(mm);
+	return 0;
+} /* end cxn_pin_by_pid() */
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
new file mode 100644
index 00000000..4fb63a36
--- /dev/null
+++ b/arch/frv/mm/pgalloc.c
@@ -0,0 +1,153 @@
+/* pgalloc.c: page directory & page table allocation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/gfp.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/quicklist.h>
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((aligned(PAGE_SIZE)));
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+	if (pte)
+		clear_page(pte);
+	return pte;
+}
+
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *page;
+
+#ifdef CONFIG_HIGHPTE
+	page = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0);
+#else
+	page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+#endif
+	if (page) {
+		clear_highpage(page);
+		pgtable_page_ctor(page);
+		flush_dcache_page(page);
+	}
+	return page;
+}
+
+void __set_pmd(pmd_t *pmdptr, unsigned long pmd)
+{
+	unsigned long *__ste_p = pmdptr->ste;
+	int loop;
+
+	if (!pmd) {
+		memset(__ste_p, 0, PME_SIZE);
+	}
+	else {
+		BUG_ON(pmd & (0x3f00 | xAMPRx_SS | 0xe));
+
+		for (loop = PME_SIZE; loop > 0; loop -= 4) {
+			*__ste_p++ = pmd;
+			pmd += __frv_PT_SIZE;
+		}
+	}
+
+	frv_dcache_writeback((unsigned long) pmdptr, (unsigned long) (pmdptr + 1));
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * If the locking proves to be non-performant, a ticketing scheme with
+ * checks at dup_mmap(), exec(), and other mmlist addition points
+ * could be used. The locking scheme was chosen on the basis of
+ * manfred's recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+	struct page *page = virt_to_page(pgd);
+	page->index = (unsigned long) pgd_list;
+	if (pgd_list)
+		set_page_private(pgd_list, (unsigned long) &page->index);
+	pgd_list = page;
+	set_page_private(page, (unsigned long)&pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+	struct page *next, **pprev, *page = virt_to_page(pgd);
+	next = (struct page *) page->index;
+	pprev = (struct page **) page_private(page);
+	*pprev = next;
+	if (next)
+		set_page_private(next, (unsigned long) pprev);
+}
+
+void pgd_ctor(void *pgd)
+{
+	unsigned long flags;
+
+	if (PTRS_PER_PMD == 1)
+		spin_lock_irqsave(&pgd_lock, flags);
+
+	memcpy((pgd_t *) pgd + USER_PGDS_IN_LAST_PML4,
+	       swapper_pg_dir + USER_PGDS_IN_LAST_PML4,
+	       (PTRS_PER_PGD - USER_PGDS_IN_LAST_PML4) * sizeof(pgd_t));
+
+	if (PTRS_PER_PMD > 1)
+		return;
+
+	pgd_list_add(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+	memset(pgd, 0, USER_PGDS_IN_LAST_PML4 * sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd)
+{
+	unsigned long flags; /* can be called from interrupt context */
+
+	spin_lock_irqsave(&pgd_lock, flags);
+	pgd_list_del(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	/* in the non-PAE case, clear_page_tables() clears user pgd entries */
+ 	quicklist_free(0, pgd_dtor, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+}
+
+void check_pgt_cache(void)
+{
+	quicklist_trim(0, pgd_dtor, 25, 16);
+}
+
diff --git a/arch/frv/mm/tlb-flush.S b/arch/frv/mm/tlb-flush.S
new file mode 100644
index 00000000..79b3c709
--- /dev/null
+++ b/arch/frv/mm/tlb-flush.S
@@ -0,0 +1,184 @@
+/* tlb-flush.S: TLB flushing routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/spr-regs.h>
+
+.macro DEBUG ch
+#	sethi.p		%hi(0xfeff9c00),gr4
+#	setlo		%lo(0xfeff9c00),gr4
+#	setlos		#\ch,gr5
+#	stbi		gr5,@(gr4,#0)
+#	membar
+.endm
+
+	.section	.rodata
+
+	# sizes corresponding to TPXR.LMAX
+	.balign		1
+__tlb_lmax_sizes:
+	.byte		0, 64, 0, 0
+	.byte		0, 0, 0, 0
+	.byte		0, 0, 0, 0
+	.byte		0, 0, 0, 0
+
+	.section	.text
+	.balign		4
+
+###############################################################################
+#
+# flush everything
+# - void __flush_tlb_all(void)
+#
+###############################################################################
+	.globl		__flush_tlb_all
+	.type		__flush_tlb_all,@function
+__flush_tlb_all:
+	DEBUG		'A'
+
+	# kill cached PGE value
+	setlos		#0xffffffff,gr4
+	movgs		gr4,scr0
+	movgs		gr4,scr1
+
+	# kill AMPR-cached TLB values
+	movgs		gr0,iamlr1
+	movgs		gr0,iampr1
+	movgs		gr0,damlr1
+	movgs		gr0,dampr1
+
+	# find out how many lines there are
+	movsg		tpxr,gr5
+	sethi.p		%hi(__tlb_lmax_sizes),gr4
+	srli		gr5,#TPXR_LMAX_SHIFT,gr5
+	setlo.p		%lo(__tlb_lmax_sizes),gr4
+	andi		gr5,#TPXR_LMAX_SMASK,gr5
+	ldub		@(gr4,gr5),gr4
+
+	# now, we assume that the TLB line step is page size in size
+	setlos.p	#PAGE_SIZE,gr5
+	setlos		#0,gr6
+1:
+	tlbpr		gr6,gr0,#6,#0
+	subicc.p	gr4,#1,gr4,icc0
+	add		gr6,gr5,gr6
+	bne		icc0,#2,1b
+
+	DEBUG		'B'
+	bralr
+
+	.size		__flush_tlb_all, .-__flush_tlb_all
+
+###############################################################################
+#
+# flush everything to do with one context
+# - void __flush_tlb_mm(unsigned long contextid [GR8])
+#
+###############################################################################
+	.globl		__flush_tlb_mm
+	.type		__flush_tlb_mm,@function
+__flush_tlb_mm:
+	DEBUG		'M'
+
+	# kill cached PGE value
+	setlos		#0xffffffff,gr4
+	movgs		gr4,scr0
+	movgs		gr4,scr1
+
+	# specify the context we want to flush
+	movgs		gr8,tplr
+
+	# find out how many lines there are
+	movsg		tpxr,gr5
+	sethi.p		%hi(__tlb_lmax_sizes),gr4
+	srli		gr5,#TPXR_LMAX_SHIFT,gr5
+	setlo.p		%lo(__tlb_lmax_sizes),gr4
+	andi		gr5,#TPXR_LMAX_SMASK,gr5
+	ldub		@(gr4,gr5),gr4
+
+	# now, we assume that the TLB line step is page size in size
+	setlos.p	#PAGE_SIZE,gr5
+	setlos		#0,gr6
+0:
+	tlbpr		gr6,gr0,#5,#0
+	subicc.p	gr4,#1,gr4,icc0
+	add		gr6,gr5,gr6
+	bne		icc0,#2,0b
+
+	DEBUG		'N'
+	bralr
+
+	.size		__flush_tlb_mm, .-__flush_tlb_mm
+
+###############################################################################
+#
+# flush a range of addresses from the TLB
+# - void __flush_tlb_page(unsigned long contextid [GR8],
+#			  unsigned long start [GR9])
+#
+###############################################################################
+	.globl		__flush_tlb_page
+	.type		__flush_tlb_page,@function
+__flush_tlb_page:
+	# kill cached PGE value
+	setlos		#0xffffffff,gr4
+	movgs		gr4,scr0
+	movgs		gr4,scr1
+
+	# specify the context we want to flush
+	movgs		gr8,tplr
+
+	# zap the matching TLB line and AMR values
+	setlos		#~(PAGE_SIZE-1),gr5
+	and		gr9,gr5,gr9
+	tlbpr		gr9,gr0,#5,#0
+
+	bralr
+
+	.size		__flush_tlb_page, .-__flush_tlb_page
+
+###############################################################################
+#
+# flush a range of addresses from the TLB
+# - void __flush_tlb_range(unsigned long contextid [GR8],
+#			   unsigned long start [GR9],
+#			   unsigned long end [GR10])
+#
+###############################################################################
+	.globl		__flush_tlb_range
+	.type		__flush_tlb_range,@function
+__flush_tlb_range:
+	# kill cached PGE value
+	setlos		#0xffffffff,gr4
+	movgs		gr4,scr0
+	movgs		gr4,scr1
+
+	# specify the context we want to flush
+	movgs		gr8,tplr
+
+	# round the start down to beginning of TLB line and end up to beginning of next TLB line
+	setlos.p	#~(PAGE_SIZE-1),gr5
+	setlos		#PAGE_SIZE,gr6
+	subi.p		gr10,#1,gr10
+	and		gr9,gr5,gr9
+	and		gr10,gr5,gr10
+2:
+	tlbpr		gr9,gr0,#5,#0
+	subcc.p		gr9,gr10,gr0,icc0
+	add		gr9,gr6,gr9
+	bne		icc0,#0,2b		; most likely a 1-page flush
+
+	bralr
+
+	.size		__flush_tlb_range, .-__flush_tlb_range
diff --git a/arch/frv/mm/tlb-miss.S b/arch/frv/mm/tlb-miss.S
new file mode 100644
index 00000000..f3ac019b
--- /dev/null
+++ b/arch/frv/mm/tlb-miss.S
@@ -0,0 +1,629 @@
+/* tlb-miss.S: TLB miss handlers
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/spr-regs.h>
+
+	.section	.text..tlbmiss
+	.balign		4
+
+	.globl		__entry_insn_mmu_miss
+__entry_insn_mmu_miss:
+	break
+	nop
+
+	.globl		__entry_insn_mmu_exception
+__entry_insn_mmu_exception:
+	break
+	nop
+
+	.globl		__entry_data_mmu_miss
+__entry_data_mmu_miss:
+	break
+	nop
+
+	.globl		__entry_data_mmu_exception
+__entry_data_mmu_exception:
+	break
+	nop
+
+###############################################################################
+#
+# handle a lookup failure of one sort or another in a kernel TLB handler
+# On entry:
+#   GR29 - faulting address
+#   SCR2 - saved CCR
+#
+###############################################################################
+	.type		__tlb_kernel_fault,@function
+__tlb_kernel_fault:
+	# see if we're supposed to re-enable single-step mode upon return
+	sethi.p		%hi(__break_tlb_miss_return_break),gr30
+	setlo		%lo(__break_tlb_miss_return_break),gr30
+	movsg		pcsr,gr31
+
+	subcc		gr31,gr30,gr0,icc0
+	beq		icc0,#0,__tlb_kernel_fault_sstep
+
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	movgs		gr29,scr2			/* save EAR0 value */
+	sethi.p		%hi(__kernel_current_task),gr29
+	setlo		%lo(__kernel_current_task),gr29
+	ldi.p		@(gr29,#0),gr29			/* restore GR29 */
+
+	bra		__entry_kernel_handle_mmu_fault
+
+	# we've got to re-enable single-stepping
+__tlb_kernel_fault_sstep:
+	sethi.p		%hi(__break_tlb_miss_real_return_info),gr30
+	setlo		%lo(__break_tlb_miss_real_return_info),gr30
+	lddi		@(gr30,0),gr30
+	movgs		gr30,pcsr
+	movgs		gr31,psr
+
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	movgs		gr29,scr2			/* save EAR0 value */
+	sethi.p		%hi(__kernel_current_task),gr29
+	setlo		%lo(__kernel_current_task),gr29
+	ldi.p		@(gr29,#0),gr29			/* restore GR29 */
+	bra		__entry_kernel_handle_mmu_fault_sstep
+
+	.size		__tlb_kernel_fault, .-__tlb_kernel_fault
+
+###############################################################################
+#
+# handle a lookup failure of one sort or another in a user TLB handler
+# On entry:
+#   GR28 - faulting address
+#   SCR2 - saved CCR
+#
+###############################################################################
+	.type		__tlb_user_fault,@function
+__tlb_user_fault:
+	# see if we're supposed to re-enable single-step mode upon return
+	sethi.p		%hi(__break_tlb_miss_return_break),gr30
+	setlo		%lo(__break_tlb_miss_return_break),gr30
+	movsg		pcsr,gr31
+	subcc		gr31,gr30,gr0,icc0
+	beq		icc0,#0,__tlb_user_fault_sstep
+
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	bra		__entry_uspace_handle_mmu_fault
+
+	# we've got to re-enable single-stepping
+__tlb_user_fault_sstep:
+	sethi.p		%hi(__break_tlb_miss_real_return_info),gr30
+	setlo		%lo(__break_tlb_miss_real_return_info),gr30
+	lddi		@(gr30,0),gr30
+	movgs		gr30,pcsr
+	movgs		gr31,psr
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	bra		__entry_uspace_handle_mmu_fault_sstep
+
+	.size		__tlb_user_fault, .-__tlb_user_fault
+
+###############################################################################
+#
+# Kernel instruction TLB miss handler
+# On entry:
+#   GR1   - kernel stack pointer
+#   GR28  - saved exception frame pointer
+#   GR29  - faulting address
+#   GR31  - EAR0 ^ SCR0
+#   SCR0  - base of virtual range covered by cached PGE from last ITLB miss (or 0xffffffff)
+#   DAMR3 - mapped page directory
+#   DAMR4 - mapped page table as matched by SCR0
+#
+###############################################################################
+	.globl		__entry_kernel_insn_tlb_miss
+	.type		__entry_kernel_insn_tlb_miss,@function
+__entry_kernel_insn_tlb_miss:
+#if 0
+	sethi.p		%hi(0xe1200004),gr30
+	setlo		%lo(0xe1200004),gr30
+	st		gr0,@(gr30,gr0)
+	sethi.p		%hi(0xffc00100),gr30
+	setlo		%lo(0xffc00100),gr30
+	sth		gr30,@(gr30,gr0)
+	membar
+#endif
+
+	movsg		ccr,gr30			/* save CCR */
+	movgs		gr30,scr2
+
+	# see if the cached page table mapping is appropriate
+	srlicc.p	gr31,#26,gr0,icc0
+	setlos		0x3ffc,gr30
+	srli.p		gr29,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bne		icc0,#0,__itlb_k_PTD_miss
+
+__itlb_k_PTD_mapped:
+	# access the PTD with EAR0[25:14]
+	# - DAMLR4 points to the virtual address of the appropriate page table
+	# - the PTD holds 4096 PTEs
+	# - the PTD must be accessed uncached
+	# - the PTE must be marked accessed if it was valid
+	#
+	and		gr31,gr30,gr31
+	movsg		damlr4,gr30
+	add		gr30,gr31,gr31
+	ldi		@(gr31,#0),gr30			/* fetch the PTE */
+	andicc		gr30,#_PAGE_PRESENT,gr0,icc0
+	ori.p		gr30,#_PAGE_ACCESSED,gr30
+	beq		icc0,#0,__tlb_kernel_fault	/* jump if PTE invalid */
+	sti.p		gr30,@(gr31,#0)			/* update the PTE */
+	andi		gr30,#~_PAGE_ACCESSED,gr30
+
+	# we're using IAMR1 as an extra TLB entry
+	# - punt the entry here (if valid) to the real TLB and then replace with the new PTE
+	# - need to check DAMR1 lest we cause an multiple-DAT-hit exception
+	# - IAMPR1 has no WP bit, and we mustn't lose WP information
+	movsg		iampr1,gr31
+	andicc		gr31,#xAMPRx_V,gr0,icc0
+	setlos.p	0xfffff000,gr31
+	beq		icc0,#0,__itlb_k_nopunt		/* punt not required */
+
+	movsg		iamlr1,gr31
+	movgs		gr31,tplr			/* set TPLR.CXN */
+	tlbpr		gr31,gr0,#4,#0			/* delete matches from TLB, IAMR1, DAMR1 */
+
+	movsg		dampr1,gr31
+	ori		gr31,#xAMPRx_V,gr31		/* entry was invalidated by tlbpr #4 */
+	movgs		gr31,tppr
+	movsg		iamlr1,gr31			/* set TPLR.CXN */
+	movgs		gr31,tplr
+	tlbpr		gr31,gr0,#2,#0			/* save to the TLB */
+	movsg		tpxr,gr31			/* check the TLB write error flag */
+	andicc.p	gr31,#TPXR_E,gr0,icc0
+	setlos		#0xfffff000,gr31
+	bne		icc0,#0,__tlb_kernel_fault
+
+__itlb_k_nopunt:
+
+	# assemble the new TLB entry
+	and		gr29,gr31,gr29
+	movsg		cxnr,gr31
+	or		gr29,gr31,gr29
+	movgs		gr29,iamlr1			/* xAMLR = address | context number */
+	movgs		gr30,iampr1
+	movgs		gr29,damlr1
+	movgs		gr30,dampr1
+
+	# return, restoring registers
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	sethi.p		%hi(__kernel_current_task),gr29
+	setlo		%lo(__kernel_current_task),gr29
+	ldi		@(gr29,#0),gr29
+	rett		#0
+	beq		icc0,#3,0			/* prevent icache prefetch */
+
+	# the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more
+	# appropriate page table and map that instead
+	#   - access the PGD with EAR0[31:26]
+	#   - DAMLR3 points to the virtual address of the page directory
+	#   - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables
+__itlb_k_PTD_miss:
+	srli		gr29,#26,gr31			/* calculate PGE offset */
+	slli		gr31,#8,gr31			/* and clear bottom bits */
+
+	movsg		damlr3,gr30
+	ld		@(gr31,gr30),gr30		/* access the PGE */
+
+	andicc.p	gr30,#_PAGE_PRESENT,gr0,icc0
+	andicc		gr30,#xAMPRx_SS,gr0,icc1
+
+	# map this PTD instead and record coverage address
+	ori.p		gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30
+	beq		icc0,#0,__tlb_kernel_fault	/* jump if PGE not present */
+	slli.p		gr31,#18,gr31
+	bne		icc1,#0,__itlb_k_bigpage
+	movgs		gr30,dampr4
+	movgs		gr31,scr0
+
+	# we can now resume normal service
+	setlos		0x3ffc,gr30
+	srli.p		gr29,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bra		__itlb_k_PTD_mapped
+
+__itlb_k_bigpage:
+	break
+	nop
+
+	.size		__entry_kernel_insn_tlb_miss, .-__entry_kernel_insn_tlb_miss
+
+###############################################################################
+#
+# Kernel data TLB miss handler
+# On entry:
+#   GR1   - kernel stack pointer
+#   GR28  - saved exception frame pointer
+#   GR29  - faulting address
+#   GR31  - EAR0 ^ SCR1
+#   SCR1  - base of virtual range covered by cached PGE from last DTLB miss (or 0xffffffff)
+#   DAMR3 - mapped page directory
+#   DAMR5 - mapped page table as matched by SCR1
+#
+###############################################################################
+	.globl		__entry_kernel_data_tlb_miss
+	.type		__entry_kernel_data_tlb_miss,@function
+__entry_kernel_data_tlb_miss:
+#if 0
+	sethi.p		%hi(0xe1200004),gr30
+	setlo		%lo(0xe1200004),gr30
+	st		gr0,@(gr30,gr0)
+	sethi.p		%hi(0xffc00100),gr30
+	setlo		%lo(0xffc00100),gr30
+	sth		gr30,@(gr30,gr0)
+	membar
+#endif
+
+	movsg		ccr,gr30			/* save CCR */
+	movgs		gr30,scr2
+
+	# see if the cached page table mapping is appropriate
+	srlicc.p	gr31,#26,gr0,icc0
+	setlos		0x3ffc,gr30
+	srli.p		gr29,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bne		icc0,#0,__dtlb_k_PTD_miss
+
+__dtlb_k_PTD_mapped:
+	# access the PTD with EAR0[25:14]
+	# - DAMLR5 points to the virtual address of the appropriate page table
+	# - the PTD holds 4096 PTEs
+	# - the PTD must be accessed uncached
+	# - the PTE must be marked accessed if it was valid
+	#
+	and		gr31,gr30,gr31
+	movsg		damlr5,gr30
+	add		gr30,gr31,gr31
+	ldi		@(gr31,#0),gr30			/* fetch the PTE */
+	andicc		gr30,#_PAGE_PRESENT,gr0,icc0
+	ori.p		gr30,#_PAGE_ACCESSED,gr30
+	beq		icc0,#0,__tlb_kernel_fault	/* jump if PTE invalid */
+	sti.p		gr30,@(gr31,#0)			/* update the PTE */
+	andi		gr30,#~_PAGE_ACCESSED,gr30
+
+	# we're using DAMR1 as an extra TLB entry
+	# - punt the entry here (if valid) to the real TLB and then replace with the new PTE
+	# - need to check IAMR1 lest we cause an multiple-DAT-hit exception
+	movsg		dampr1,gr31
+	andicc		gr31,#xAMPRx_V,gr0,icc0
+	setlos.p	0xfffff000,gr31
+	beq		icc0,#0,__dtlb_k_nopunt		/* punt not required */
+
+	movsg		damlr1,gr31
+	movgs		gr31,tplr			/* set TPLR.CXN */
+	tlbpr		gr31,gr0,#4,#0			/* delete matches from TLB, IAMR1, DAMR1 */
+
+	movsg		dampr1,gr31
+	ori		gr31,#xAMPRx_V,gr31		/* entry was invalidated by tlbpr #4 */
+	movgs		gr31,tppr
+	movsg		damlr1,gr31			/* set TPLR.CXN */
+	movgs		gr31,tplr
+	tlbpr		gr31,gr0,#2,#0			/* save to the TLB */
+	movsg		tpxr,gr31			/* check the TLB write error flag */
+	andicc.p	gr31,#TPXR_E,gr0,icc0
+	setlos		#0xfffff000,gr31
+	bne		icc0,#0,__tlb_kernel_fault
+
+__dtlb_k_nopunt:
+
+	# assemble the new TLB entry
+	and		gr29,gr31,gr29
+	movsg		cxnr,gr31
+	or		gr29,gr31,gr29
+	movgs		gr29,iamlr1			/* xAMLR = address | context number */
+	movgs		gr30,iampr1
+	movgs		gr29,damlr1
+	movgs		gr30,dampr1
+
+	# return, restoring registers
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	sethi.p		%hi(__kernel_current_task),gr29
+	setlo		%lo(__kernel_current_task),gr29
+	ldi		@(gr29,#0),gr29
+	rett		#0
+	beq		icc0,#3,0			/* prevent icache prefetch */
+
+	# the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more
+	# appropriate page table and map that instead
+	#   - access the PGD with EAR0[31:26]
+	#   - DAMLR3 points to the virtual address of the page directory
+	#   - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables
+__dtlb_k_PTD_miss:
+	srli		gr29,#26,gr31			/* calculate PGE offset */
+	slli		gr31,#8,gr31			/* and clear bottom bits */
+
+	movsg		damlr3,gr30
+	ld		@(gr31,gr30),gr30		/* access the PGE */
+
+	andicc.p	gr30,#_PAGE_PRESENT,gr0,icc0
+	andicc		gr30,#xAMPRx_SS,gr0,icc1
+
+	# map this PTD instead and record coverage address
+	ori.p		gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30
+	beq		icc0,#0,__tlb_kernel_fault	/* jump if PGE not present */
+	slli.p		gr31,#18,gr31
+	bne		icc1,#0,__dtlb_k_bigpage
+	movgs		gr30,dampr5
+	movgs		gr31,scr1
+
+	# we can now resume normal service
+	setlos		0x3ffc,gr30
+	srli.p		gr29,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bra		__dtlb_k_PTD_mapped
+
+__dtlb_k_bigpage:
+	break
+	nop
+
+	.size		__entry_kernel_data_tlb_miss, .-__entry_kernel_data_tlb_miss
+
+###############################################################################
+#
+# Userspace instruction TLB miss handler (with PGE prediction)
+# On entry:
+#   GR28  - faulting address
+#   GR31  - EAR0 ^ SCR0
+#   SCR0  - base of virtual range covered by cached PGE from last ITLB miss (or 0xffffffff)
+#   DAMR3 - mapped page directory
+#   DAMR4 - mapped page table as matched by SCR0
+#
+###############################################################################
+	.globl		__entry_user_insn_tlb_miss
+	.type		__entry_user_insn_tlb_miss,@function
+__entry_user_insn_tlb_miss:
+#if 0
+	sethi.p		%hi(0xe1200004),gr30
+	setlo		%lo(0xe1200004),gr30
+	st		gr0,@(gr30,gr0)
+	sethi.p		%hi(0xffc00100),gr30
+	setlo		%lo(0xffc00100),gr30
+	sth		gr30,@(gr30,gr0)
+	membar
+#endif
+
+	movsg		ccr,gr30			/* save CCR */
+	movgs		gr30,scr2
+
+	# see if the cached page table mapping is appropriate
+	srlicc.p	gr31,#26,gr0,icc0
+	setlos		0x3ffc,gr30
+	srli.p		gr28,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bne		icc0,#0,__itlb_u_PTD_miss
+
+__itlb_u_PTD_mapped:
+	# access the PTD with EAR0[25:14]
+	# - DAMLR4 points to the virtual address of the appropriate page table
+	# - the PTD holds 4096 PTEs
+	# - the PTD must be accessed uncached
+	# - the PTE must be marked accessed if it was valid
+	#
+	and		gr31,gr30,gr31
+	movsg		damlr4,gr30
+	add		gr30,gr31,gr31
+	ldi		@(gr31,#0),gr30			/* fetch the PTE */
+	andicc		gr30,#_PAGE_PRESENT,gr0,icc0
+	ori.p		gr30,#_PAGE_ACCESSED,gr30
+	beq		icc0,#0,__tlb_user_fault	/* jump if PTE invalid */
+	sti.p		gr30,@(gr31,#0)			/* update the PTE */
+	andi		gr30,#~_PAGE_ACCESSED,gr30
+
+	# we're using IAMR1/DAMR1 as an extra TLB entry
+	# - punt the entry here (if valid) to the real TLB and then replace with the new PTE
+	movsg		dampr1,gr31
+	andicc		gr31,#xAMPRx_V,gr0,icc0
+	setlos.p	0xfffff000,gr31
+	beq		icc0,#0,__itlb_u_nopunt		/* punt not required */
+
+	movsg		dampr1,gr31
+	movgs		gr31,tppr
+	movsg		damlr1,gr31			/* set TPLR.CXN */
+	movgs		gr31,tplr
+	tlbpr		gr31,gr0,#2,#0			/* save to the TLB */
+	movsg		tpxr,gr31			/* check the TLB write error flag */
+	andicc.p	gr31,#TPXR_E,gr0,icc0
+	setlos		#0xfffff000,gr31
+	bne		icc0,#0,__tlb_user_fault
+
+__itlb_u_nopunt:
+
+	# assemble the new TLB entry
+	and		gr28,gr31,gr28
+	movsg		cxnr,gr31
+	or		gr28,gr31,gr28
+	movgs		gr28,iamlr1			/* xAMLR = address | context number */
+	movgs		gr30,iampr1
+	movgs		gr28,damlr1
+	movgs		gr30,dampr1
+
+	# return, restoring registers
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	rett		#0
+	beq		icc0,#3,0			/* prevent icache prefetch */
+
+	# the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more
+	# appropriate page table and map that instead
+	#   - access the PGD with EAR0[31:26]
+	#   - DAMLR3 points to the virtual address of the page directory
+	#   - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables
+__itlb_u_PTD_miss:
+	srli		gr28,#26,gr31			/* calculate PGE offset */
+	slli		gr31,#8,gr31			/* and clear bottom bits */
+
+	movsg		damlr3,gr30
+	ld		@(gr31,gr30),gr30		/* access the PGE */
+
+	andicc.p	gr30,#_PAGE_PRESENT,gr0,icc0
+	andicc		gr30,#xAMPRx_SS,gr0,icc1
+
+	# map this PTD instead and record coverage address
+	ori.p		gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30
+	beq		icc0,#0,__tlb_user_fault	/* jump if PGE not present */
+	slli.p		gr31,#18,gr31
+	bne		icc1,#0,__itlb_u_bigpage
+	movgs		gr30,dampr4
+	movgs		gr31,scr0
+
+	# we can now resume normal service
+	setlos		0x3ffc,gr30
+	srli.p		gr28,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bra		__itlb_u_PTD_mapped
+
+__itlb_u_bigpage:
+	break
+	nop
+
+	.size		__entry_user_insn_tlb_miss, .-__entry_user_insn_tlb_miss
+
+###############################################################################
+#
+# Userspace data TLB miss handler
+# On entry:
+#   GR28  - faulting address
+#   GR31  - EAR0 ^ SCR1
+#   SCR1  - base of virtual range covered by cached PGE from last DTLB miss (or 0xffffffff)
+#   DAMR3 - mapped page directory
+#   DAMR5 - mapped page table as matched by SCR1
+#
+###############################################################################
+	.globl		__entry_user_data_tlb_miss
+	.type		__entry_user_data_tlb_miss,@function
+__entry_user_data_tlb_miss:
+#if 0
+	sethi.p		%hi(0xe1200004),gr30
+	setlo		%lo(0xe1200004),gr30
+	st		gr0,@(gr30,gr0)
+	sethi.p		%hi(0xffc00100),gr30
+	setlo		%lo(0xffc00100),gr30
+	sth		gr30,@(gr30,gr0)
+	membar
+#endif
+
+	movsg		ccr,gr30			/* save CCR */
+	movgs		gr30,scr2
+
+	# see if the cached page table mapping is appropriate
+	srlicc.p	gr31,#26,gr0,icc0
+	setlos		0x3ffc,gr30
+	srli.p		gr28,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bne		icc0,#0,__dtlb_u_PTD_miss
+
+__dtlb_u_PTD_mapped:
+	# access the PTD with EAR0[25:14]
+	# - DAMLR5 points to the virtual address of the appropriate page table
+	# - the PTD holds 4096 PTEs
+	# - the PTD must be accessed uncached
+	# - the PTE must be marked accessed if it was valid
+	#
+	and		gr31,gr30,gr31
+	movsg		damlr5,gr30
+
+__dtlb_u_using_iPTD:
+	add		gr30,gr31,gr31
+	ldi		@(gr31,#0),gr30			/* fetch the PTE */
+	andicc		gr30,#_PAGE_PRESENT,gr0,icc0
+	ori.p		gr30,#_PAGE_ACCESSED,gr30
+	beq		icc0,#0,__tlb_user_fault	/* jump if PTE invalid */
+	sti.p		gr30,@(gr31,#0)			/* update the PTE */
+	andi		gr30,#~_PAGE_ACCESSED,gr30
+
+	# we're using DAMR1 as an extra TLB entry
+	# - punt the entry here (if valid) to the real TLB and then replace with the new PTE
+	movsg		dampr1,gr31
+	andicc		gr31,#xAMPRx_V,gr0,icc0
+	setlos.p	0xfffff000,gr31
+	beq		icc0,#0,__dtlb_u_nopunt		/* punt not required */
+
+	movsg		dampr1,gr31
+	movgs		gr31,tppr
+	movsg		damlr1,gr31			/* set TPLR.CXN */
+	movgs		gr31,tplr
+	tlbpr		gr31,gr0,#2,#0			/* save to the TLB */
+	movsg		tpxr,gr31			/* check the TLB write error flag */
+	andicc.p	gr31,#TPXR_E,gr0,icc0
+	setlos		#0xfffff000,gr31
+	bne		icc0,#0,__tlb_user_fault
+
+__dtlb_u_nopunt:
+
+	# assemble the new TLB entry
+	and		gr28,gr31,gr28
+	movsg		cxnr,gr31
+	or		gr28,gr31,gr28
+	movgs		gr28,iamlr1			/* xAMLR = address | context number */
+	movgs		gr30,iampr1
+	movgs		gr28,damlr1
+	movgs		gr30,dampr1
+
+	# return, restoring registers
+	movsg		scr2,gr30
+	movgs		gr30,ccr
+	rett		#0
+	beq		icc0,#3,0			/* prevent icache prefetch */
+
+	# the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more
+	# appropriate page table and map that instead
+	#   - first of all, check the insn PGE cache - we may well get a hit there
+	#   - access the PGD with EAR0[31:26]
+	#   - DAMLR3 points to the virtual address of the page directory
+	#   - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables
+__dtlb_u_PTD_miss:
+	movsg		scr0,gr31			/* consult the insn-PGE-cache key */
+	xor		gr28,gr31,gr31
+	srlicc		gr31,#26,gr0,icc0
+	srli		gr28,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bne		icc0,#0,__dtlb_u_iPGE_miss
+
+	# what we're looking for is covered by the insn-PGE-cache
+	setlos		0x3ffc,gr30
+	and		gr31,gr30,gr31
+	movsg		damlr4,gr30
+	bra		__dtlb_u_using_iPTD
+
+__dtlb_u_iPGE_miss:
+	srli		gr28,#26,gr31			/* calculate PGE offset */
+	slli		gr31,#8,gr31			/* and clear bottom bits */
+
+	movsg		damlr3,gr30
+	ld		@(gr31,gr30),gr30		/* access the PGE */
+
+	andicc.p	gr30,#_PAGE_PRESENT,gr0,icc0
+	andicc		gr30,#xAMPRx_SS,gr0,icc1
+
+	# map this PTD instead and record coverage address
+	ori.p		gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30
+	beq		icc0,#0,__tlb_user_fault	/* jump if PGE not present */
+	slli.p		gr31,#18,gr31
+	bne		icc1,#0,__dtlb_u_bigpage
+	movgs		gr30,dampr5
+	movgs		gr31,scr1
+
+	# we can now resume normal service
+	setlos		0x3ffc,gr30
+	srli.p		gr28,#12,gr31			/* use EAR0[25:14] as PTE index */
+	bra		__dtlb_u_PTD_mapped
+
+__dtlb_u_bigpage:
+	break
+	nop
+
+	.size		__entry_user_data_tlb_miss, .-__entry_user_data_tlb_miss