Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 262 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c
deleted file mode 100644
index 355e9621..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * arch/arm/mach-orion5x/edmini_v2-setup.c
- *
- * LaCie Ethernet Disk mini V2 Setup
- *
- * Copyright (C) 2008 Christopher Moore <moore@free.fr>
- * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * EDMINI_V2 Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define EDMINI_V2_NOR_BOOT_BASE		0xfff80000
-#define EDMINI_V2_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-/*
- * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
- * -type device. This could cause risks of accidentally erasing critical
- * flash sectors. We thus define a single, write-protected partition covering
- * the whole flash.
- * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
- * code, break this into at least three partitions: 'u-boot code', 'u-boot
- * environment' and 'whatever is left'.
- */
-
-static struct mtd_partition edmini_v2_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= 0x00080000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data edmini_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= edmini_v2_partitions,
-	.nr_parts	= ARRAY_SIZE(edmini_v2_partitions),
-};
-
-static struct resource edmini_v2_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= EDMINI_V2_NOR_BOOT_BASE,
-	.end			= EDMINI_V2_NOR_BOOT_BASE
-		+ EDMINI_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device edmini_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &edmini_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &edmini_v2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define EDMINIV2_RTC_GPIO	3
-
-static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-	.irq = 0,
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-
-static struct mv_sata_platform_data edmini_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO LED (simple - doesn't use hardware blinking support)
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_LED_POWER	16
-
-static struct gpio_led edmini_v2_leds[] = {
-	{
-		.name = "power:blue",
-		.gpio = EDMINI_V2_GPIO_LED_POWER,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data edmini_v2_led_data = {
-	.num_leds = ARRAY_SIZE(edmini_v2_leds),
-	.leds = edmini_v2_leds,
-};
-
-static struct platform_device edmini_v2_gpio_leds = {
-	.name           = "leds-gpio",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &edmini_v2_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO key
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_KEY_POWER	18
-
-static struct gpio_keys_button edmini_v2_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= EDMINI_V2_GPIO_KEY_POWER,
-		.desc		= "Power Button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data edmini_v2_button_data = {
-	.buttons	= edmini_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(edmini_v2_buttons),
-};
-
-static struct platform_device edmini_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edmini_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int edminiv2_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_UNUSED,
-	MPP2_UNUSED,
-	MPP3_GPIO,	/* RTC interrupt */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,	/* SATA 0 presence */
-	MPP13_SATA_LED,	/* SATA 1 presence */
-	MPP14_SATA_LED,	/* SATA 0 active */
-	MPP15_SATA_LED,	/* SATA 1 active */
-	/* 16: Power LED control (0 = On, 1 = Off) */
-	MPP16_GPIO,
-	/* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
-	MPP17_GPIO,
-	/* 18: Power button status (0 = Released, 1 = Pressed) */
-	MPP18_GPIO,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init edmini_v2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(edminiv2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&edmini_v2_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&edmini_v2_sata_data);
-	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
-				EDMINI_V2_NOR_BOOT_SIZE);
-	platform_device_register(&edmini_v2_nor_flash);
-	platform_device_register(&edmini_v2_gpio_leds);
-	platform_device_register(&edmini_v2_gpio_buttons);
-
-	pr_notice("edmini_v2: USB device port, flash write and power-off "
-		  "are not yet supported.\n");
-
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
-			edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
-		else
-			gpio_free(EDMINIV2_RTC_GPIO);
-	}
-
-	if (edmini_v2_i2c_rtc.irq == 0)
-		pr_warning("edmini_v2: failed to get RTC IRQ\n");
-
-	i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
-	/* Maintainer: Christopher Moore <moore@free.fr> */
-	.atag_offset	= 0x100,
-	.init_machine	= edmini_v2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END