From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001 From: Srikant Patnaik Date: Sun, 11 Jan 2015 12:28:04 +0530 Subject: Moved, renamed, and deleted files The original directory structure was scattered and unorganized. Changes are basically to make it look like kernel structure. --- .../arch/arm/mach-orion5x/edmini_v2-setup.c | 262 --------------------- 1 file changed, 262 deletions(-) delete mode 100644 ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c (limited to 'ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c') diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c deleted file mode 100644 index 355e9621..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c +++ /dev/null @@ -1,262 +0,0 @@ -/* - * arch/arm/mach-orion5x/edmini_v2-setup.c - * - * LaCie Ethernet Disk mini V2 Setup - * - * Copyright (C) 2008 Christopher Moore - * Copyright (C) 2008 Albert Aribaud - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* - * TODO: add Orion USB device port init when kernel.org support is added. - * TODO: add flash write support: see below. - * TODO: add power-off support. - * TODO: add I2C EEPROM support. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * EDMINI_V2 Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000 -#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on BOOT Device - ****************************************************************************/ - -/* - * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom - * -type device. This could cause risks of accidentally erasing critical - * flash sectors. We thus define a single, write-protected partition covering - * the whole flash. - * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD - * code, break this into at least three partitions: 'u-boot code', 'u-boot - * environment' and 'whatever is left'. - */ - -static struct mtd_partition edmini_v2_partitions[] = { - { - .name = "Full512kb", - .size = 0x00080000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data edmini_v2_nor_flash_data = { - .width = 1, - .parts = edmini_v2_partitions, - .nr_parts = ARRAY_SIZE(edmini_v2_partitions), -}; - -static struct resource edmini_v2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = EDMINI_V2_NOR_BOOT_BASE, - .end = EDMINI_V2_NOR_BOOT_BASE - + EDMINI_V2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device edmini_v2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edmini_v2_nor_flash_data, - }, - .num_resources = 1, - .resource = &edmini_v2_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data edmini_v2_eth_data = { - .phy_addr = 8, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -#define EDMINIV2_RTC_GPIO 3 - -static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), - .irq = 0, -}; - -/***************************************************************************** - * Sata - ****************************************************************************/ - -static struct mv_sata_platform_data edmini_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO LED (simple - doesn't use hardware blinking support) - ****************************************************************************/ - -#define EDMINI_V2_GPIO_LED_POWER 16 - -static struct gpio_led edmini_v2_leds[] = { - { - .name = "power:blue", - .gpio = EDMINI_V2_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data edmini_v2_led_data = { - .num_leds = ARRAY_SIZE(edmini_v2_leds), - .leds = edmini_v2_leds, -}; - -static struct platform_device edmini_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &edmini_v2_led_data, - }, -}; - -/**************************************************************************** - * GPIO key - ****************************************************************************/ - -#define EDMINI_V2_GPIO_KEY_POWER 18 - -static struct gpio_keys_button edmini_v2_buttons[] = { - { - .code = KEY_POWER, - .gpio = EDMINI_V2_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data edmini_v2_button_data = { - .buttons = edmini_v2_buttons, - .nbuttons = ARRAY_SIZE(edmini_v2_buttons), -}; - -static struct platform_device edmini_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &edmini_v2_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int edminiv2_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - /* 16: Power LED control (0 = On, 1 = Off) */ - MPP16_GPIO, - /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - MPP17_GPIO, - /* 18: Power button status (0 = Released, 1 = Pressed) */ - MPP18_GPIO, - MPP19_UNUSED, - 0, -}; - -static void __init edmini_v2_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(edminiv2_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_eth_init(&edmini_v2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&edmini_v2_sata_data); - orion5x_uart0_init(); - - orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); - platform_device_register(&edmini_v2_nor_flash); - platform_device_register(&edmini_v2_gpio_leds); - platform_device_register(&edmini_v2_gpio_buttons); - - pr_notice("edmini_v2: USB device port, flash write and power-off " - "are not yet supported.\n"); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0) - edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO); - else - gpio_free(EDMINIV2_RTC_GPIO); - } - - if (edmini_v2_i2c_rtc.irq == 0) - pr_warning("edmini_v2: failed to get RTC IRQ\n"); - - i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); -} - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") - /* Maintainer: Christopher Moore */ - .atag_offset = 0x100, - .init_machine = edmini_v2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -- cgit