Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

301 files changed, 0 insertions, 62981 deletions

diff --git a/ANDROID_3.4.5/arch/alpha/Kconfig b/ANDROID_3.4.5/arch/alpha/Kconfig
deleted file mode 100644
index 22e58a99..00000000
--- a/ANDROID_3.4.5/arch/alpha/Kconfig
+++ /dev/null
@@ -1,670 +0,0 @@
-config ALPHA
-	bool
-	default y
-	select HAVE_AOUT
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_SYSCALL_WRAPPERS
-	select HAVE_IRQ_WORK
-	select HAVE_PCSPKR_PLATFORM
-	select HAVE_PERF_EVENTS
-	select HAVE_DMA_ATTRS
-	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_IRQ_PROBE
-	select AUTO_IRQ_AFFINITY if SMP
-	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARCH_HAVE_NMI_SAFE_CMPXCHG
-	help
-	  The Alpha is a 64-bit general-purpose processor designed and
-	  marketed by the Digital Equipment Corporation of blessed memory,
-	  now Hewlett-Packard.  The Alpha Linux project has a home page at
-	  <http://www.alphalinux.org/>.
-
-config 64BIT
-	def_bool y
-
-config MMU
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_CMOS_UPDATE
-        def_bool y
-
-config GENERIC_GPIO
-	bool
-
-config ZONE_DMA
-	bool
-	default y
-
-config ARCH_DMA_ADDR_T_64BIT
-	def_bool y
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
-config NEED_SG_DMA_LENGTH
-	def_bool y
-
-config GENERIC_ISA_DMA
-	bool
-	default y
-
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-
-
-menu "System setup"
-
-choice
-	prompt "Alpha system type"
-	default ALPHA_GENERIC
-	---help---
-	  This is the system type of your hardware.  A "generic" kernel will
-	  run on any supported Alpha system. However, if you configure a
-	  kernel for your specific system, it will be faster and smaller.
-
-	  To find out what type of Alpha system you have, you may want to
-	  check out the Linux/Alpha FAQ, accessible on the WWW from
-	  <http://www.alphalinux.org/>. In summary:
-
-	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
-	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
-	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
-	  Miata               Personal Workstation 433/500/600 a/au
-	  Marvel              AlphaServer ES47 / ES80 / GS1280
-	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
-	  Noritake            AS 1000A, AS 600A, AS 800
-	  PC164               AlphaPC164
-	  Rawhide             AS 1200, AS 4000, AS 4100
-	  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
-	  SX164               AlphaPC164-SX
-	  Sable               AS 2000, AS 2100
-	  Shark               DS 20L
-	  Takara              Takara (OEM)
-	  Titan               AlphaServer ES45 / DS25 / DS15
-	  Wildfire            AlphaServer GS 40/80/160/320
-
-	  If you don't know what to do, choose "generic".
-
-config ALPHA_GENERIC
-	bool "Generic"
-	help
-	  A generic kernel will run on all supported Alpha hardware.
-
-config ALPHA_ALCOR
-	bool "Alcor/Alpha-XLT"
-	help
-	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
-	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
-	  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
-	  controller (256-bit memory bus) and a PCI interface.  It also does
-	  all the work required to support an external Bcache and to maintain
-	  memory coherence when a PCI device DMAs into (or out of) memory.
-
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
-config ALPHA_DP264
-	bool "DP264"
-	help
-	  Various 21264 systems with the tsunami core logic chipset.
-	  API Networks: 264DP, UP2000(+), CS20;
-	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
-
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
-config ALPHA_EIGER
-	bool "Eiger"
-	help
-	  Apparently an obscure OEM single-board computer based on the
-	  Typhoon/Tsunami chipset family. Information on it is scanty.
-
-config ALPHA_JENSEN
-	bool "Jensen"
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
-config ALPHA_LX164
-	bool "LX164"
-	help
-	  A technical overview of this board is available at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
-
-config ALPHA_LYNX
-	bool "Lynx"
-	help
-	  AlphaServer 2100A-based systems.
-
-config ALPHA_MARVEL
-	bool "Marvel"
-	help
-	  AlphaServer ES47 / ES80 / GS1280 based on EV7.
-
-config ALPHA_MIATA
-	bool "Miata"
-	help
-	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
-	  or 600au).
-
-config ALPHA_MIKASA
-	bool "Mikasa"
-	help
-	  AlphaServer 1000-based Alpha systems.
-
-config ALPHA_NAUTILUS
-	bool "Nautilus"
-	help
-	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
-
-config ALPHA_NONAME_CH
-	bool "Noname"
-
-config ALPHA_NORITAKE
-	bool "Noritake"
-	help
-	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
-	  systems.
-
-config ALPHA_PC164
-	bool "PC164"
-
-config ALPHA_P2K
-	bool "Platform2000"
-
-config ALPHA_RAWHIDE
-	bool "Rawhide"
-	help
-	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
-	  See HOWTO at
-	  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
-
-config ALPHA_RUFFIAN
-	bool "Ruffian"
-	help
-	  Samsung APC164UX.  There is a page on known problems and workarounds
-	  at <http://www.alphalinux.org/faq/FAQ-11.html>.
-
-config ALPHA_RX164
-	bool "RX164"
-
-config ALPHA_SX164
-	bool "SX164"
-
-config ALPHA_SABLE
-	bool "Sable"
-	help
-	  Digital AlphaServer 2000 and 2100-based systems.
-
-config ALPHA_SHARK
-	bool "Shark"
-
-config ALPHA_TAKARA
-	bool "Takara"
-	help
-	  Alpha 11164-based OEM single-board computer.
-
-config ALPHA_TITAN
-	bool "Titan"
-	help
-	  AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
-
-config ALPHA_WILDFIRE
-	bool "Wildfire"
-	help
-	  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
-
-endchoice
-
-# clear all implied options (don't want default values for those):
-# Most of these machines have ISA slots; not exactly sure which don't,
-# and this doesn't activate hordes of code, so do it always.
-config ISA
-	bool
-	default y
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config ISA_DMA_API
-	bool
-	default y
-
-config PCI
-	bool
-	depends on !ALPHA_JENSEN
-	select GENERIC_PCI_IOMAP
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	default y
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config IOMMU_HELPER
-	def_bool PCI
-
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
-config ALPHA_EV4
-	bool
-	default y if ALPHA_LYNX && !ALPHA_EV5
-
-config ALPHA_CIA
-	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-	default y
-
-config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?"
-	depends on ALPHA_SABLE
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-config ALPHA_GAMMA
-	bool
-	depends on ALPHA_LYNX
-	default y
-
-config ALPHA_T2
-	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
-	default y
-
-config ALPHA_PYXIS
-	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
-	default y
-
-config ALPHA_EV6
-	bool
-	depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
-	default y
-
-config ALPHA_TSUNAMI
-	bool
-	depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
-	default y
-
-config ALPHA_EV67
-	bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
-	default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	help
-	  Is this a machine based on the EV67 core?  If in doubt, select N here
-	  and the machine will be treated as an EV6.
-
-config ALPHA_MCPCIA
-	bool
-	depends on ALPHA_RAWHIDE
-	default y
-
-config ALPHA_POLARIS
-	bool
-	depends on ALPHA_RX164
-	default y
-
-config ALPHA_IRONGATE
-	bool
-	depends on ALPHA_NAUTILUS
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y if !ALPHA_EV67
-
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
-config ALPHA_BROKEN_IRQ_MASK
-	bool
-	depends on ALPHA_GENERIC || ALPHA_PC164
-	default y
-
-config VGA_HOSE
-	bool
-	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
-	default y
-	help
-	  Support VGA on an arbitrary hose; needed for several platforms
-	  which always have multiple hoses, and whose consoles support it.
-
-
-config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
-	  There are two different types of booting firmware on Alphas: SRM,
-	  which is command line driven, and ARC, which uses menus and arrow
-	  keys. Details about the Linux/Alpha booting process are contained in
-	  the Linux/Alpha FAQ, accessible on the WWW from
-	  <http://www.alphalinux.org/>.
-
-	  The usual way to load Linux on an Alpha machine is to use MILO
-	  (a bootloader that lets you pass command line parameters to the
-	  kernel just like lilo does for the x86 architecture) which can be
-	  loaded either from ARC or can be installed directly as a permanent
-	  firmware replacement from floppy (which requires changing a certain
-	  jumper on the motherboard). If you want to do either of these, say N
-	  here. If MILO doesn't work on your system (true for Jensen
-	  motherboards), you can bypass it altogether and boot Linux directly
-	  from an SRM console; say Y here in order to do that. Note that you
-	  won't be able to boot from an IDE disk using SRM.
-
-	  If unsure, say N.
-
-config EISA
-	bool
-	depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	def_bool y
-
-config SMP
-	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
-	select USE_GENERIC_SMP_HELPERS
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, like most personal computers, say N. If
-	  you have a system with more than one CPU, say Y.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on many, but not all,
-	  singleprocessor machines. On a singleprocessor machine, the kernel
-	  will run faster if you say N here.
-
-	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you don't know what to do here, say N.
-
-config HAVE_DEC_LOCK
-	bool
-	depends on SMP
-	default y
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "32" if ALPHA_GENERIC || ALPHA_MARVEL
-	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
-	help
-	  MARVEL support can handle a maximum of 32 CPUs, all the others
-          with working support have a maximum of 4 CPUs.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous Memory Support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
-source "mm/Kconfig"
-
-config NUMA
-	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM && BROKEN
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
-
-config NODES_SHIFT
-	int
-	default "7"
-	depends on NEED_MULTIPLE_NODES
-
-# LARGE_VMALLOC is racy, if you *really* need it then fix it first
-config ALPHA_LARGE_VMALLOC
-	bool
-	---help---
-	  Process creation and other aspects of virtual memory management can
-	  be streamlined if we restrict the kernel to one PGD for all vmalloc
-	  allocations.  This equates to about 8GB.
-
-	  Under normal circumstances, this is so far and above what is needed
-	  as to be laughable.  However, there are certain applications (such
-	  as benchmark-grade in-kernel web serving) that can make use of as
-	  much vmalloc space as is available.
-
-	  Say N unless you know you need gobs and gobs of vmalloc space.
-
-config VERBOSE_MCHECK
-	bool "Verbose Machine Checks"
-
-config VERBOSE_MCHECK_ON
-	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
-	depends on VERBOSE_MCHECK
-	default 1
-	---help---
-	  This option allows the default printing mode to be set, and then
-	  possibly overridden by a boot command argument.
-
-	  For example, if one wanted the option of printing verbose
-	  machine checks, but wanted the default to be as if verbose
-	  machine check printing was turned off, then one would choose
-	  the printing mode to be 0. Then, upon reboot, one could add
-	  the boot command line "verbose_mcheck=1" to get the normal
-	  verbose machine check printing, or "verbose_mcheck=2" to get
-	  the maximum information available.
-
-	  Take the default (1) unless you want more control or more info.
-
-config HZ
-	int
-	default 1200 if ALPHA_RAWHIDE
-	default 1024
-
-source "drivers/pci/Kconfig"
-source "drivers/eisa/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config SRM_ENV
-	tristate "SRM environment through procfs"
-	depends on PROC_FS
-	---help---
-	  If you enable this option, a subdirectory inside /proc called
-	  /proc/srm_environment will give you access to the all important
-	  SRM environment variables (those which have a name) and also
-	  to all others (by their internal number).
-
-	  SRM is something like a BIOS for Alpha machines. There are some
-	  other such BIOSes, like AlphaBIOS, which this driver cannot
-	  support (hey, that's not SRM!).
-
-	  Despite the fact that this driver doesn't work on all Alphas (but
-	  only on those which have SRM as their firmware), it's save to
-	  build it even if your particular machine doesn't know about SRM
-	  (or if you intend to compile a generic kernel). It will simply
-	  not create those subdirectory in /proc (and give you some warning,
-	  of course).
-
-	  This driver is also available as a module and will be called
-	  srm_env then.
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/alpha/Kconfig.debug"
-
-# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
-# but we also need it if VGA_HOSE is set
-config DUMMY_CONSOLE
-	bool
-	depends on VGA_HOSE
-	default y
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
diff --git a/ANDROID_3.4.5/arch/alpha/Kconfig.debug b/ANDROID_3.4.5/arch/alpha/Kconfig.debug
deleted file mode 100644
index 3f6265f2..00000000
--- a/ANDROID_3.4.5/arch/alpha/Kconfig.debug
+++ /dev/null
@@ -1,42 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config EARLY_PRINTK
-	bool
-	depends on ALPHA_GENERIC || ALPHA_SRM
-	default y
-
-config ALPHA_LEGACY_START_ADDRESS
-	bool "Legacy kernel start address"
-	depends on ALPHA_GENERIC
-	default n
-	---help---
-	  The 2.4 kernel changed the kernel start address from 0x310000
-	  to 0x810000 to make room for the Wildfire's larger SRM console.
-	  Recent consoles on Titan and Marvel machines also require the
-	  extra room.
-
-	  If you're using aboot 0.7 or later, the bootloader will examine the
-	  ELF headers to determine where to transfer control. Unfortunately,
-	  most older bootloaders -- APB or MILO -- hardcoded the kernel start
-	  address rather than examining the ELF headers, and the result is a
-	  hard lockup.
-
-	  Say Y if you have a broken bootloader.  Say N if you do not, or if
-	  you wish to run on Wildfire, Titan, or Marvel.
-
-config ALPHA_LEGACY_START_ADDRESS
-	bool
-	depends on !ALPHA_GENERIC && !ALPHA_TITAN && !ALPHA_MARVEL && !ALPHA_WILDFIRE
-	default y
-
-config MATHEMU
-	tristate "Kernel FP software completion" if DEBUG_KERNEL && !SMP
-	default y if !DEBUG_KERNEL || SMP
-	help
-	  This option is required for IEEE compliant floating point arithmetic
-	  on the Alpha. The only time you would ever not say Y is to say M in
-	  order to debug the code. Say Y unless you know what you are doing.
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/alpha/Makefile b/ANDROID_3.4.5/arch/alpha/Makefile
deleted file mode 100644
index 4759fe75..00000000
--- a/ANDROID_3.4.5/arch/alpha/Makefile
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# alpha/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-NM := $(NM) -B
-
-LDFLAGS_vmlinux	:= -static -N #-relax
-CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
-cflags-y	+= $(call cc-option, -fno-jump-tables)
-
-cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5
-cpuflags-$(CONFIG_ALPHA_EV56)		:= -mcpu=ev56
-cpuflags-$(CONFIG_ALPHA_POLARIS)	:= -mcpu=pca56
-cpuflags-$(CONFIG_ALPHA_SX164)		:= -mcpu=pca56
-cpuflags-$(CONFIG_ALPHA_EV6)		:= -mcpu=ev6
-cpuflags-$(CONFIG_ALPHA_EV67)		:= -mcpu=ev67
-# If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default.  Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev5
-
-cflags-y				+= $(cpuflags-y)
-
-
-# For TSUNAMI, we must have the assembler not emulate our instructions.
-# The same is true for IRONGATE, POLARIS, PYXIS.
-# BWX is most important, but we don't really want any emulation ever.
-KBUILD_CFLAGS += $(cflags-y) -Wa,-mev6
-
-head-y := arch/alpha/kernel/head.o
-
-core-y				+= arch/alpha/kernel/ arch/alpha/mm/
-core-$(CONFIG_MATHEMU)		+= arch/alpha/math-emu/
-drivers-$(CONFIG_OPROFILE)	+= arch/alpha/oprofile/
-libs-y				+= arch/alpha/lib/
-
-# export what is needed by arch/alpha/boot/Makefile
-LIBS_Y := $(patsubst %/, %/lib.a, $(libs-y))
-export LIBS_Y
-
-boot := arch/alpha/boot
-
-#Default target when executing make with no arguments
-all boot: $(boot)/vmlinux.gz
-
-$(boot)/vmlinux.gz: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $@
-
-bootimage bootpfile bootpzfile: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
-define archhelp
-  echo '* boot		- Compressed kernel image (arch/alpha/boot/vmlinux.gz)'
-  echo '  bootimage	- SRM bootable image (arch/alpha/boot/bootimage)'
-  echo '  bootpfile	- BOOTP bootable image (arch/alpha/boot/bootpfile)'
-  echo '  bootpzfile	- compressed kernel BOOTP image (arch/alpha/boot/bootpzfile)'
-endef
diff --git a/ANDROID_3.4.5/arch/alpha/boot/Makefile b/ANDROID_3.4.5/arch/alpha/boot/Makefile
deleted file mode 100644
index cd143887..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/Makefile
+++ /dev/null
@@ -1,116 +0,0 @@
-#
-# arch/alpha/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-hostprogs-y	:= tools/mkbb tools/objstrip
-targets		:= vmlinux.gz vmlinux \
-		   vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
-		   tools/bootpzh bootloader bootpheader bootpzheader 
-OBJSTRIP	:= $(obj)/tools/objstrip
-
-# SRM bootable image.  Copy to offset 512 of a partition.
-$(obj)/bootimage: $(addprefix $(obj)/tools/,mkbb lxboot bootlx) $(obj)/vmlinux.nh
-	( cat $(obj)/tools/lxboot $(obj)/tools/bootlx $(obj)/vmlinux.nh ) > $@ 
-	$(obj)/tools/mkbb $@ $(obj)/tools/lxboot
-	@echo '  Bootimage $@ is ready'
-
-# BOOTP bootable image.  Define INITRD during make to append initrd image.
-$(obj)/bootpfile: $(obj)/tools/bootph $(obj)/vmlinux.nh
-	cat $(obj)/tools/bootph $(obj)/vmlinux.nh > $@
-ifdef INITRD
-	cat $(INITRD) >> $@
-endif
-
-# Compressed kernel BOOTP bootable image.
-# Define INITRD during make to append initrd image.
-$(obj)/bootpzfile: $(obj)/tools/bootpzh $(obj)/vmlinux.nh.gz
-	cat $(obj)/tools/bootpzh $(obj)/vmlinux.nh.gz > $@
-ifdef INITRD
-	cat $(INITRD) >> $@
-endif
-
-# Compressed kernel image
-$(obj)/vmlinux.gz: $(obj)/vmlinux FORCE
-	$(call if_changed,gzip)
-	@echo '  Kernel $@ is ready'
-
-$(obj)/main.o: $(obj)/ksize.h
-$(obj)/bootp.o: $(obj)/ksize.h
-$(obj)/bootpz.o: $(obj)/kzsize.h
-
-$(obj)/ksize.h: $(obj)/vmlinux.nh FORCE
-	echo "#define KERNEL_SIZE `ls -l $(obj)/vmlinux.nh | awk '{print $$5}'`" > $@T
-ifdef INITRD
-	[ -f $(INITRD) ] || exit 1
-	echo "#define INITRD_IMAGE_SIZE `ls -l $(INITRD) | awk '{print $$5}'`" >> $@T
-endif
-	cmp -s $@T $@ || mv -f $@T $@
-	rm -f $@T
-
-$(obj)/kzsize.h: $(obj)/vmlinux.nh.gz FORCE
-	echo "#define KERNEL_SIZE `ls -l $(obj)/vmlinux.nh | awk '{print $$5}'`" > $@T
-	echo "#define KERNEL_Z_SIZE `ls -l $(obj)/vmlinux.nh.gz | awk '{print $$5}'`" >> $@T
-ifdef INITRD
-	[ -f $(INITRD) ] || exit 1
-	echo "#define INITRD_IMAGE_SIZE `ls -l $(INITRD) | awk '{print $$5}'`" >> $@T
-endif
-	cmp -s $@T $@ || mv -f $@T $@
-	rm -f $@T
-
-quiet_cmd_strip = STRIP  $@
-      cmd_strip = $(STRIP) -o $@ $<
-
-$(obj)/vmlinux: vmlinux FORCE
-	$(call if_changed,strip)
-
-quiet_cmd_objstrip = OBJSTRIP $@
-      cmd_objstrip = $(OBJSTRIP) $(OSFLAGS_$(@F)) $< $@
-
-OSFLAGS_vmlinux.nh	:= -v
-OSFLAGS_lxboot		:= -p
-OSFLAGS_bootlx		:= -vb
-OSFLAGS_bootph		:= -vb
-OSFLAGS_bootpzh		:= -vb
-
-$(obj)/vmlinux.nh: vmlinux $(OBJSTRIP) FORCE
-	$(call if_changed,objstrip)
-
-$(obj)/vmlinux.nh.gz: $(obj)/vmlinux.nh FORCE
-	$(call if_changed,gzip)
-
-$(obj)/tools/lxboot: $(obj)/bootloader $(OBJSTRIP) FORCE
-	$(call if_changed,objstrip)
-
-$(obj)/tools/bootlx: $(obj)/bootloader $(OBJSTRIP) FORCE
-	$(call if_changed,objstrip)
-
-$(obj)/tools/bootph: $(obj)/bootpheader $(OBJSTRIP) FORCE
-	$(call if_changed,objstrip)
-
-$(obj)/tools/bootpzh: $(obj)/bootpzheader $(OBJSTRIP) FORCE
-	$(call if_changed,objstrip)
-
-LDFLAGS_bootloader   := -static -uvsprintf -T  #-N -relax
-LDFLAGS_bootpheader  := -static -uvsprintf -T  #-N -relax
-LDFLAGS_bootpzheader := -static -uvsprintf -T  #-N -relax
-
-OBJ_bootlx   := $(obj)/head.o $(obj)/main.o
-OBJ_bootph   := $(obj)/head.o $(obj)/bootp.o
-OBJ_bootpzh  := $(obj)/head.o $(obj)/bootpz.o $(obj)/misc.o
-
-$(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE
-	$(call if_changed,ld)
-
-$(obj)/bootpheader: $(obj)/bootloader.lds $(OBJ_bootph) $(LIBS_Y) FORCE
-	$(call if_changed,ld)
-
-$(obj)/bootpzheader: $(obj)/bootloader.lds $(OBJ_bootpzh) $(LIBS_Y) FORCE
-	$(call if_changed,ld)
-
-$(obj)/misc.o: lib/inflate.c
diff --git a/ANDROID_3.4.5/arch/alpha/boot/bootloader.lds b/ANDROID_3.4.5/arch/alpha/boot/bootloader.lds
deleted file mode 100644
index 31c081ce..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/bootloader.lds
+++ /dev/null
@@ -1,24 +0,0 @@
-OUTPUT_FORMAT("elf64-alpha")
-ENTRY(__start)
-printk = srm_printk;
-SECTIONS
-{
-  . = 0x20000000;
-  .text : { *(.text) }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata : { *(.rodata) *(.rodata.*) }
-  .data : { *(.data) CONSTRUCTORS }
-  .got : { *(.got) }
-  .sdata : { *(.sdata) }
-  _edata = .;
-  PROVIDE (edata = .);
-  .sbss : { *(.sbss) *(.scommon) }
-  .bss : { *(.bss) *(COMMON) }
-  _end = . ;
-  PROVIDE (end = .);
-
-  .mdebug 0 : { *(.mdebug) }
-  .note 0 : { *(.note) }
-  .comment 0 : { *(.comment) }
-}
diff --git a/ANDROID_3.4.5/arch/alpha/boot/bootp.c b/ANDROID_3.4.5/arch/alpha/boot/bootp.c
deleted file mode 100644
index 2a542a50..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/bootp.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * arch/alpha/boot/bootp.c
- *
- * Copyright (C) 1997 Jay Estabrook
- *
- * This file is used for creating a bootp file for the Linux/AXP kernel
- *
- * based significantly on the arch/alpha/boot/main.c of Linus Torvalds
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <generated/utsrelease.h>
-#include <linux/mm.h>
-
-#include <asm/console.h>
-#include <asm/hwrpb.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-#include <stdarg.h>
-
-#include "ksize.h"
-
-extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
-	unsigned long *vptb);
-
-extern void move_stack(unsigned long new_stack);
-
-struct hwrpb_struct *hwrpb = INIT_HWRPB;
-static struct pcb_struct pcb_va[1];
-
-/*
- * Find a physical address of a virtual object..
- *
- * This is easy using the virtual page table address.
- */
-
-static inline void *
-find_pa(unsigned long *vptb, void *ptr)
-{
-	unsigned long address = (unsigned long) ptr;
-	unsigned long result;
-
-	result = vptb[address >> 13];
-	result >>= 32;
-	result <<= 13;
-	result |= address & 0x1fff;
-	return (void *) result;
-}	
-
-/*
- * This function moves into OSF/1 pal-code, and has a temporary
- * PCB for that. The kernel proper should replace this PCB with
- * the real one as soon as possible.
- *
- * The page table muckery in here depends on the fact that the boot
- * code has the L1 page table identity-map itself in the second PTE
- * in the L1 page table. Thus the L1-page is virtually addressable
- * itself (through three levels) at virtual address 0x200802000.
- */
-
-#define VPTB	((unsigned long *) 0x200000000)
-#define L1	((unsigned long *) 0x200802000)
-
-void
-pal_init(void)
-{
-	unsigned long i, rev;
-	struct percpu_struct * percpu;
-	struct pcb_struct * pcb_pa;
-
-	/* Create the dummy PCB.  */
-	pcb_va->ksp = 0;
-	pcb_va->usp = 0;
-	pcb_va->ptbr = L1[1] >> 32;
-	pcb_va->asn = 0;
-	pcb_va->pcc = 0;
-	pcb_va->unique = 0;
-	pcb_va->flags = 1;
-	pcb_va->res1 = 0;
-	pcb_va->res2 = 0;
-	pcb_pa = find_pa(VPTB, pcb_va);
-
-	/*
-	 * a0 = 2 (OSF)
-	 * a1 = return address, but we give the asm the vaddr of the PCB
-	 * a2 = physical addr of PCB
-	 * a3 = new virtual page table pointer
-	 * a4 = KSP (but the asm sets it)
-	 */
-	srm_printk("Switching to OSF PAL-code .. ");
-
-	i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB);
-	if (i) {
-		srm_printk("failed, code %ld\n", i);
-		__halt();
-	}
-
-	percpu = (struct percpu_struct *)
-		(INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB);
-	rev = percpu->pal_revision = percpu->palcode_avail[2];
-
-	srm_printk("Ok (rev %lx)\n", rev);
-
-	tbia(); /* do it directly in case we are SMP */
-}
-
-static inline void
-load(unsigned long dst, unsigned long src, unsigned long count)
-{
-	memcpy((void *)dst, (void *)src, count);
-}
-
-/*
- * Start the kernel.
- */
-static inline void
-runkernel(void)
-{
-	__asm__ __volatile__(
-		"bis %0,%0,$27\n\t"
-		"jmp ($27)"
-		: /* no outputs: it doesn't even return */
-		: "r" (START_ADDR));
-}
-
-extern char _end;
-#define KERNEL_ORIGIN \
-	((((unsigned long)&_end) + 511) & ~511)
-
-void
-start_kernel(void)
-{
-	/*
-	 * Note that this crufty stuff with static and envval
-	 * and envbuf is because:
-	 *
-	 * 1. Frequently, the stack is short, and we don't want to overrun;
-	 * 2. Frequently the stack is where we are going to copy the kernel to;
-	 * 3. A certain SRM console required the GET_ENV output to stack.
-	 *    ??? A comment in the aboot sources indicates that the GET_ENV
-	 *    destination must be quadword aligned.  Might this explain the
-	 *    behaviour, rather than requiring output to the stack, which
-	 *    seems rather far-fetched.
-	 */
-	static long nbytes;
-	static char envval[256] __attribute__((aligned(8)));
-	static unsigned long initrd_start;
-
-	srm_printk("Linux/AXP bootp loader for Linux " UTS_RELEASE "\n");
-	if (INIT_HWRPB->pagesize != 8192) {
-		srm_printk("Expected 8kB pages, got %ldkB\n",
-		           INIT_HWRPB->pagesize >> 10);
-		return;
-	}
-	if (INIT_HWRPB->vptb != (unsigned long) VPTB) {
-		srm_printk("Expected vptb at %p, got %p\n",
-			   VPTB, (void *)INIT_HWRPB->vptb);
-		return;
-	}
-	pal_init();
-
-	/* The initrd must be page-aligned.  See below for the 
-	   cause of the magic number 5.  */
-	initrd_start = ((START_ADDR + 5*KERNEL_SIZE + PAGE_SIZE) |
-			(PAGE_SIZE-1)) + 1;
-#ifdef INITRD_IMAGE_SIZE
-	srm_printk("Initrd positioned at %#lx\n", initrd_start);
-#endif
-
-	/*
-	 * Move the stack to a safe place to ensure it won't be
-	 * overwritten by kernel image.
-	 */
-	move_stack(initrd_start - PAGE_SIZE);
-
-	nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval));
-	if (nbytes < 0 || nbytes >= sizeof(envval)) {
-		nbytes = 0;
-	}
-	envval[nbytes] = '\0';
-	srm_printk("Loading the kernel...'%s'\n", envval);
-
-	/* NOTE: *no* callbacks or printouts from here on out!!! */
-
-	/* This is a hack, as some consoles seem to get virtual 20000000 (ie
-	 * where the SRM console puts the kernel bootp image) memory
-	 * overlapping physical memory where the kernel wants to be put,
-	 * which causes real problems when attempting to copy the former to
-	 * the latter... :-(
-	 *
-	 * So, we first move the kernel virtual-to-physical way above where
-	 * we physically want the kernel to end up, then copy it from there
-	 * to its final resting place... ;-}
-	 *
-	 * Sigh...  */
-
-#ifdef INITRD_IMAGE_SIZE
-	load(initrd_start, KERNEL_ORIGIN+KERNEL_SIZE, INITRD_IMAGE_SIZE);
-#endif
-        load(START_ADDR+(4*KERNEL_SIZE), KERNEL_ORIGIN, KERNEL_SIZE);
-        load(START_ADDR, START_ADDR+(4*KERNEL_SIZE), KERNEL_SIZE);
-
-	memset((char*)ZERO_PGE, 0, PAGE_SIZE);
-	strcpy((char*)ZERO_PGE, envval);
-#ifdef INITRD_IMAGE_SIZE
-	((long *)(ZERO_PGE+256))[0] = initrd_start;
-	((long *)(ZERO_PGE+256))[1] = INITRD_IMAGE_SIZE;
-#endif
-
-	runkernel();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/boot/bootpz.c b/ANDROID_3.4.5/arch/alpha/boot/bootpz.c
deleted file mode 100644
index d6ad1916..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/bootpz.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * arch/alpha/boot/bootpz.c
- *
- * Copyright (C) 1997 Jay Estabrook
- *
- * This file is used for creating a compressed BOOTP file for the
- * Linux/AXP kernel
- *
- * based significantly on the arch/alpha/boot/main.c of Linus Torvalds
- * and the decompression code from MILO.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <generated/utsrelease.h>
-#include <linux/mm.h>
-
-#include <asm/console.h>
-#include <asm/hwrpb.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-#include <stdarg.h>
-
-#include "kzsize.h"
-
-/* FIXME FIXME FIXME */
-#define MALLOC_AREA_SIZE 0x200000 /* 2MB for now */
-/* FIXME FIXME FIXME */
-
-
-/*
-  WARNING NOTE
-
-  It is very possible that turning on additional messages may cause
-  kernel image corruption due to stack usage to do the printing.
-
-*/
-
-#undef DEBUG_CHECK_RANGE
-#undef DEBUG_ADDRESSES
-#undef DEBUG_LAST_STEPS
-
-extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
-	unsigned long *vptb);
-
-extern int decompress_kernel(void* destination, void *source,
-			     size_t ksize, size_t kzsize);
-
-extern void move_stack(unsigned long new_stack);
-
-struct hwrpb_struct *hwrpb = INIT_HWRPB;
-static struct pcb_struct pcb_va[1];
-
-/*
- * Find a physical address of a virtual object..
- *
- * This is easy using the virtual page table address.
- */
-#define VPTB	((unsigned long *) 0x200000000)
-
-static inline unsigned long
-find_pa(unsigned long address)
-{
-	unsigned long result;
-
-	result = VPTB[address >> 13];
-	result >>= 32;
-	result <<= 13;
-	result |= address & 0x1fff;
-	return result;
-}	
-
-int
-check_range(unsigned long vstart, unsigned long vend,
-	    unsigned long kstart, unsigned long kend)
-{
-	unsigned long vaddr, kaddr;
-
-#ifdef DEBUG_CHECK_RANGE
-	srm_printk("check_range: V[0x%lx:0x%lx] K[0x%lx:0x%lx]\n",
-		   vstart, vend, kstart, kend);
-#endif
-	/* do some range checking for detecting an overlap... */
-	for (vaddr = vstart; vaddr <= vend; vaddr += PAGE_SIZE)
-	{
-		kaddr = (find_pa(vaddr) | PAGE_OFFSET);
-		if (kaddr >= kstart && kaddr <= kend)
-		{
-#ifdef DEBUG_CHECK_RANGE
-			srm_printk("OVERLAP: vaddr 0x%lx kaddr 0x%lx"
-				   " [0x%lx:0x%lx]\n",
-				   vaddr, kaddr, kstart, kend);
-#endif
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * This function moves into OSF/1 pal-code, and has a temporary
- * PCB for that. The kernel proper should replace this PCB with
- * the real one as soon as possible.
- *
- * The page table muckery in here depends on the fact that the boot
- * code has the L1 page table identity-map itself in the second PTE
- * in the L1 page table. Thus the L1-page is virtually addressable
- * itself (through three levels) at virtual address 0x200802000.
- */
-
-#define L1	((unsigned long *) 0x200802000)
-
-void
-pal_init(void)
-{
-	unsigned long i, rev;
-	struct percpu_struct * percpu;
-	struct pcb_struct * pcb_pa;
-
-	/* Create the dummy PCB.  */
-	pcb_va->ksp = 0;
-	pcb_va->usp = 0;
-	pcb_va->ptbr = L1[1] >> 32;
-	pcb_va->asn = 0;
-	pcb_va->pcc = 0;
-	pcb_va->unique = 0;
-	pcb_va->flags = 1;
-	pcb_va->res1 = 0;
-	pcb_va->res2 = 0;
-	pcb_pa = (struct pcb_struct *)find_pa((unsigned long)pcb_va);
-
-	/*
-	 * a0 = 2 (OSF)
-	 * a1 = return address, but we give the asm the vaddr of the PCB
-	 * a2 = physical addr of PCB
-	 * a3 = new virtual page table pointer
-	 * a4 = KSP (but the asm sets it)
-	 */
-	srm_printk("Switching to OSF PAL-code... ");
-
-	i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB);
-	if (i) {
-		srm_printk("failed, code %ld\n", i);
-		__halt();
-	}
-
-	percpu = (struct percpu_struct *)
-		(INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB);
-	rev = percpu->pal_revision = percpu->palcode_avail[2];
-
-	srm_printk("OK (rev %lx)\n", rev);
-
-	tbia(); /* do it directly in case we are SMP */
-}
-
-/*
- * Start the kernel.
- */
-static inline void
-runkernel(void)
-{
-	__asm__ __volatile__(
-		"bis %0,%0,$27\n\t"
-		"jmp ($27)"
-		: /* no outputs: it doesn't even return */
-		: "r" (START_ADDR));
-}
-
-/* Must record the SP (it is virtual) on entry, so we can make sure
-   not to overwrite it during movement or decompression. */
-unsigned long SP_on_entry;
-
-/* Calculate the kernel image address based on the end of the BOOTP
-   bootstrapper (ie this program).
-*/
-extern char _end;
-#define KERNEL_ORIGIN \
-	((((unsigned long)&_end) + 511) & ~511)
-
-/* Round address to next higher page boundary. */
-#define NEXT_PAGE(a)	(((a) | (PAGE_SIZE - 1)) + 1)
-
-#ifdef INITRD_IMAGE_SIZE
-# define REAL_INITRD_SIZE INITRD_IMAGE_SIZE
-#else
-# define REAL_INITRD_SIZE 0
-#endif
-
-/* Defines from include/asm-alpha/system.h
-
-	BOOT_ADDR	Virtual address at which the consoles loads
-			the BOOTP image.
-
-	KERNEL_START    KSEG address at which the kernel is built to run,
-			which includes some initial data pages before the
-			code.
-
-	START_ADDR	KSEG address of the entry point of kernel code.
-
-	ZERO_PGE	KSEG address of page full of zeroes, but 
-			upon entry to kerne cvan be expected
-			to hold the parameter list and possible
-			INTRD information.
-
-   These are used in the local defines below.
-*/
-  
-
-/* Virtual addresses for the BOOTP image. Note that this includes the
-   bootstrapper code as well as the compressed kernel image, and
-   possibly the INITRD image.
-
-   Oh, and do NOT forget the STACK, which appears to be placed virtually
-   beyond the end of the loaded image.
-*/
-#define V_BOOT_IMAGE_START	BOOT_ADDR
-#define V_BOOT_IMAGE_END	SP_on_entry
-
-/* Virtual addresses for just the bootstrapper part of the BOOTP image. */
-#define V_BOOTSTRAPPER_START	BOOT_ADDR
-#define V_BOOTSTRAPPER_END	KERNEL_ORIGIN
-
-/* Virtual addresses for just the data part of the BOOTP
-   image. This may also include the INITRD image, but always
-   includes the STACK.
-*/
-#define V_DATA_START		KERNEL_ORIGIN
-#define V_INITRD_START		(KERNEL_ORIGIN + KERNEL_Z_SIZE)
-#define V_INTRD_END		(V_INITRD_START + REAL_INITRD_SIZE)
-#define V_DATA_END	 	V_BOOT_IMAGE_END
-
-/* KSEG addresses for the uncompressed kernel.
-
-   Note that the end address includes workspace for the decompression.
-   Note also that the DATA_START address is ZERO_PGE, to which we write
-   just before jumping to the kernel image at START_ADDR.
- */
-#define K_KERNEL_DATA_START	ZERO_PGE
-#define K_KERNEL_IMAGE_START	START_ADDR
-#define K_KERNEL_IMAGE_END	(START_ADDR + KERNEL_SIZE)
-
-/* Define to where we may have to decompress the kernel image, before
-   we move it to the final position, in case of overlap. This will be
-   above the final position of the kernel.
-
-   Regardless of overlap, we move the INITRD image to the end of this
-   copy area, because there needs to be a buffer area after the kernel
-   for "bootmem" anyway.
-*/
-#define K_COPY_IMAGE_START	NEXT_PAGE(K_KERNEL_IMAGE_END)
-/* Reserve one page below INITRD for the new stack. */
-#define K_INITRD_START \
-    NEXT_PAGE(K_COPY_IMAGE_START + KERNEL_SIZE + PAGE_SIZE)
-#define K_COPY_IMAGE_END \
-    (K_INITRD_START + REAL_INITRD_SIZE + MALLOC_AREA_SIZE)
-#define K_COPY_IMAGE_SIZE \
-    NEXT_PAGE(K_COPY_IMAGE_END - K_COPY_IMAGE_START)
-
-void
-start_kernel(void)
-{
-	int must_move = 0;
-
-	/* Initialize these for the decompression-in-place situation,
-	   which is the smallest amount of work and most likely to
-	   occur when using the normal START_ADDR of the kernel
-	   (currently set to 16MB, to clear all console code.
-	*/
-	unsigned long uncompressed_image_start = K_KERNEL_IMAGE_START;
-	unsigned long uncompressed_image_end = K_KERNEL_IMAGE_END;
-
-	unsigned long initrd_image_start = K_INITRD_START;
-
-	/*
-	 * Note that this crufty stuff with static and envval
-	 * and envbuf is because:
-	 *
-	 * 1. Frequently, the stack is short, and we don't want to overrun;
-	 * 2. Frequently the stack is where we are going to copy the kernel to;
-	 * 3. A certain SRM console required the GET_ENV output to stack.
-	 *    ??? A comment in the aboot sources indicates that the GET_ENV
-	 *    destination must be quadword aligned.  Might this explain the
-	 *    behaviour, rather than requiring output to the stack, which
-	 *    seems rather far-fetched.
-	 */
-	static long nbytes;
-	static char envval[256] __attribute__((aligned(8)));
-	register unsigned long asm_sp asm("30");
-
-	SP_on_entry = asm_sp;
-
-	srm_printk("Linux/Alpha BOOTPZ Loader for Linux " UTS_RELEASE "\n");
-
-	/* Validity check the HWRPB. */
-	if (INIT_HWRPB->pagesize != 8192) {
-		srm_printk("Expected 8kB pages, got %ldkB\n",
-		           INIT_HWRPB->pagesize >> 10);
-		return;
-	}
-	if (INIT_HWRPB->vptb != (unsigned long) VPTB) {
-		srm_printk("Expected vptb at %p, got %p\n",
-			   VPTB, (void *)INIT_HWRPB->vptb);
-		return;
-	}
-
-	/* PALcode (re)initialization. */
-	pal_init();
-
-	/* Get the parameter list from the console environment variable. */
-	nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval));
-	if (nbytes < 0 || nbytes >= sizeof(envval)) {
-		nbytes = 0;
-	}
-	envval[nbytes] = '\0';
-
-#ifdef DEBUG_ADDRESSES
-	srm_printk("START_ADDR 0x%lx\n", START_ADDR);
-	srm_printk("KERNEL_ORIGIN 0x%lx\n", KERNEL_ORIGIN);
-	srm_printk("KERNEL_SIZE 0x%x\n", KERNEL_SIZE);
-	srm_printk("KERNEL_Z_SIZE 0x%x\n", KERNEL_Z_SIZE);
-#endif
-
-	/* Since all the SRM consoles load the BOOTP image at virtual
-	 * 0x20000000, we have to ensure that the physical memory
-	 * pages occupied by that image do NOT overlap the physical
-	 * address range where the kernel wants to be run.  This
-	 * causes real problems when attempting to cdecompress the
-	 * former into the latter... :-(
-	 *
-	 * So, we may have to decompress/move the kernel/INITRD image
-	 * virtual-to-physical someplace else first before moving
-	 * kernel /INITRD to their final resting places... ;-}
-	 *
-	 * Sigh...
-	 */
-
-	/* First, check to see if the range of addresses occupied by
-	   the bootstrapper part of the BOOTP image include any of the
-	   physical pages into which the kernel will be placed for
-	   execution.
-
-	   We only need check on the final kernel image range, since we
-	   will put the INITRD someplace that we can be sure is not
-	   in conflict.
-	 */
-	if (check_range(V_BOOTSTRAPPER_START, V_BOOTSTRAPPER_END,
-			K_KERNEL_DATA_START, K_KERNEL_IMAGE_END))
-	{
-		srm_printk("FATAL ERROR: overlap of bootstrapper code\n");
-		__halt();
-	}
-
-	/* Next, check to see if the range of addresses occupied by
-	   the compressed kernel/INITRD/stack portion of the BOOTP
-	   image include any of the physical pages into which the
-	   decompressed kernel or the INITRD will be placed for
-	   execution.
-	 */
-	if (check_range(V_DATA_START, V_DATA_END,
-			K_KERNEL_IMAGE_START, K_COPY_IMAGE_END))
-	{
-#ifdef DEBUG_ADDRESSES
-		srm_printk("OVERLAP: cannot decompress in place\n");
-#endif
-		uncompressed_image_start = K_COPY_IMAGE_START;
-		uncompressed_image_end = K_COPY_IMAGE_END;
-		must_move = 1;
-
-		/* Finally, check to see if the range of addresses
-		   occupied by the compressed kernel/INITRD part of
-		   the BOOTP image include any of the physical pages
-		   into which that part is to be copied for
-		   decompression.
-		*/
-		while (check_range(V_DATA_START, V_DATA_END,
-				   uncompressed_image_start,
-				   uncompressed_image_end))
-		{
-#if 0
-			uncompressed_image_start += K_COPY_IMAGE_SIZE;
-			uncompressed_image_end += K_COPY_IMAGE_SIZE;
-			initrd_image_start += K_COPY_IMAGE_SIZE;
-#else
-			/* Keep as close as possible to end of BOOTP image. */
-			uncompressed_image_start += PAGE_SIZE;
-			uncompressed_image_end += PAGE_SIZE;
-			initrd_image_start += PAGE_SIZE;
-#endif
-		}
-	}
-
-	srm_printk("Starting to load the kernel with args '%s'\n", envval);
-
-#ifdef DEBUG_ADDRESSES
-	srm_printk("Decompressing the kernel...\n"
-		   "...from 0x%lx to 0x%lx size 0x%x\n",
-		   V_DATA_START,
-		   uncompressed_image_start,
-		   KERNEL_SIZE);
-#endif
-        decompress_kernel((void *)uncompressed_image_start,
-			  (void *)V_DATA_START,
-			  KERNEL_SIZE, KERNEL_Z_SIZE);
-
-	/*
-	 * Now, move things to their final positions, if/as required.
-	 */
-
-#ifdef INITRD_IMAGE_SIZE
-
-	/* First, we always move the INITRD image, if present. */
-#ifdef DEBUG_ADDRESSES
-	srm_printk("Moving the INITRD image...\n"
-		   " from 0x%lx to 0x%lx size 0x%x\n",
-		   V_INITRD_START,
-		   initrd_image_start,
-		   INITRD_IMAGE_SIZE);
-#endif
-	memcpy((void *)initrd_image_start, (void *)V_INITRD_START,
-	       INITRD_IMAGE_SIZE);
-
-#endif /* INITRD_IMAGE_SIZE */
-
-	/* Next, we may have to move the uncompressed kernel to the
-	   final destination.
-	 */
-	if (must_move) {
-#ifdef DEBUG_ADDRESSES
-		srm_printk("Moving the uncompressed kernel...\n"
-			   "...from 0x%lx to 0x%lx size 0x%x\n",
-			   uncompressed_image_start,
-			   K_KERNEL_IMAGE_START,
-			   (unsigned)KERNEL_SIZE);
-#endif
-		/*
-		 * Move the stack to a safe place to ensure it won't be
-		 * overwritten by kernel image.
-		 */
-		move_stack(initrd_image_start - PAGE_SIZE);
-
-		memcpy((void *)K_KERNEL_IMAGE_START,
-		       (void *)uncompressed_image_start, KERNEL_SIZE);
-	}
-	
-	/* Clear the zero page, then move the argument list in. */
-#ifdef DEBUG_LAST_STEPS
-	srm_printk("Preparing ZERO_PGE...\n");
-#endif
-	memset((char*)ZERO_PGE, 0, PAGE_SIZE);
-	strcpy((char*)ZERO_PGE, envval);
-
-#ifdef INITRD_IMAGE_SIZE
-
-#ifdef DEBUG_LAST_STEPS
-	srm_printk("Preparing INITRD info...\n");
-#endif
-	/* Finally, set the INITRD paramenters for the kernel. */
-	((long *)(ZERO_PGE+256))[0] = initrd_image_start;
-	((long *)(ZERO_PGE+256))[1] = INITRD_IMAGE_SIZE;
-
-#endif /* INITRD_IMAGE_SIZE */
-
-#ifdef DEBUG_LAST_STEPS
-	srm_printk("Doing 'runkernel()'...\n");
-#endif
-	runkernel();
-}
-
- /* dummy function, should never be called. */
-void *__kmalloc(size_t size, gfp_t flags)
-{
-	return (void *)NULL;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/boot/head.S b/ANDROID_3.4.5/arch/alpha/boot/head.S
deleted file mode 100644
index b06812bc..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/head.S
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/alpha/boot/head.S
- *
- * initial bootloader stuff..
- */
-
-
-	.set noreorder
-	.globl	__start
-	.ent	__start
-__start:
-	br	$29,2f
-2:	ldgp	$29,0($29)
-	jsr	$26,start_kernel
-	call_pal PAL_halt
-	.end __start
-
-	.align 5
-	.globl	wrent
-	.ent	wrent
-wrent:
-	.prologue 0
-	call_pal PAL_wrent
-	ret ($26)
-	.end wrent
-
-	.align 5
-	.globl	wrkgp
-	.ent	wrkgp
-wrkgp:
-	.prologue 0
-	call_pal PAL_wrkgp
-	ret ($26)
-	.end wrkgp
-
-	.align 5
-	.globl	switch_to_osf_pal
-	.ent	switch_to_osf_pal
-switch_to_osf_pal:
-	subq	$30,128,$30
-	.frame	$30,128,$26
-	stq	$26,0($30)
-	stq	$1,8($30)
-	stq	$2,16($30)
-	stq	$3,24($30)
-	stq	$4,32($30)
-	stq	$5,40($30)
-	stq	$6,48($30)
-	stq	$7,56($30)
-	stq	$8,64($30)
-	stq	$9,72($30)
-	stq	$10,80($30)
-	stq	$11,88($30)
-	stq	$12,96($30)
-	stq	$13,104($30)
-	stq	$14,112($30)
-	stq	$15,120($30)
-	.prologue 0
-
-	stq	$30,0($17)	/* save KSP in PCB */
-
-	bis	$30,$30,$20	/* a4 = KSP */
-	br	$17,1f
-
-	ldq	$26,0($30)
-	ldq	$1,8($30)
-	ldq	$2,16($30)
-	ldq	$3,24($30)
-	ldq	$4,32($30)
-	ldq	$5,40($30)
-	ldq	$6,48($30)
-	ldq	$7,56($30)
-	ldq	$8,64($30)
-	ldq	$9,72($30)
-	ldq	$10,80($30)
-	ldq	$11,88($30)
-	ldq	$12,96($30)
-	ldq	$13,104($30)
-	ldq	$14,112($30)
-	ldq	$15,120($30)
-	addq	$30,128,$30
-	ret ($26)
-1:	call_pal PAL_swppal
-	.end	switch_to_osf_pal
-
-	.align 3
-	.globl	tbi
-	.ent	tbi
-tbi:
-	.prologue 0
-	call_pal PAL_tbi
-	ret	($26)
-	.end tbi
-
-	.align 3
-	.globl	halt
-	.ent	halt
-halt:
-	.prologue 0
-	call_pal PAL_halt
-	.end halt
-
-/* $16 - new stack page */
-	.align 3
-	.globl	move_stack
-	.ent	move_stack
-move_stack:
-	.prologue 0
-	lda	$0, 0x1fff($31)
-	and	$0, $30, $1			/* Stack offset */
-	or	$1, $16, $16			/* New stack pointer */
-	mov	$30, $1
-	mov	$16, $2
-1:	ldq	$3, 0($1)			/* Move the stack */
-	addq	$1, 8, $1
-	stq	$3, 0($2)
-	and	$0, $1, $4
-	addq	$2, 8, $2
-	bne	$4, 1b
-	mov	$16, $30
-	ret	($26)
-	.end move_stack
diff --git a/ANDROID_3.4.5/arch/alpha/boot/main.c b/ANDROID_3.4.5/arch/alpha/boot/main.c
deleted file mode 100644
index 3baf2d1e..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/main.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/alpha/boot/main.c
- *
- * Copyright (C) 1994, 1995 Linus Torvalds
- *
- * This file is the bootloader for the Linux/AXP kernel
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <generated/utsrelease.h>
-#include <linux/mm.h>
-
-#include <asm/console.h>
-#include <asm/hwrpb.h>
-#include <asm/pgtable.h>
-
-#include <stdarg.h>
-
-#include "ksize.h"
-
-extern int vsprintf(char *, const char *, va_list);
-extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
-	unsigned long *vptb);
-struct hwrpb_struct *hwrpb = INIT_HWRPB;
-static struct pcb_struct pcb_va[1];
-
-/*
- * Find a physical address of a virtual object..
- *
- * This is easy using the virtual page table address.
- */
-
-static inline void *
-find_pa(unsigned long *vptb, void *ptr)
-{
-	unsigned long address = (unsigned long) ptr;
-	unsigned long result;
-
-	result = vptb[address >> 13];
-	result >>= 32;
-	result <<= 13;
-	result |= address & 0x1fff;
-	return (void *) result;
-}	
-
-/*
- * This function moves into OSF/1 pal-code, and has a temporary
- * PCB for that. The kernel proper should replace this PCB with
- * the real one as soon as possible.
- *
- * The page table muckery in here depends on the fact that the boot
- * code has the L1 page table identity-map itself in the second PTE
- * in the L1 page table. Thus the L1-page is virtually addressable
- * itself (through three levels) at virtual address 0x200802000.
- */
-
-#define VPTB	((unsigned long *) 0x200000000)
-#define L1	((unsigned long *) 0x200802000)
-
-void
-pal_init(void)
-{
-	unsigned long i, rev;
-	struct percpu_struct * percpu;
-	struct pcb_struct * pcb_pa;
-
-	/* Create the dummy PCB.  */
-	pcb_va->ksp = 0;
-	pcb_va->usp = 0;
-	pcb_va->ptbr = L1[1] >> 32;
-	pcb_va->asn = 0;
-	pcb_va->pcc = 0;
-	pcb_va->unique = 0;
-	pcb_va->flags = 1;
-	pcb_va->res1 = 0;
-	pcb_va->res2 = 0;
-	pcb_pa = find_pa(VPTB, pcb_va);
-
-	/*
-	 * a0 = 2 (OSF)
-	 * a1 = return address, but we give the asm the vaddr of the PCB
-	 * a2 = physical addr of PCB
-	 * a3 = new virtual page table pointer
-	 * a4 = KSP (but the asm sets it)
-	 */
-	srm_printk("Switching to OSF PAL-code .. ");
-
-	i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB);
-	if (i) {
-		srm_printk("failed, code %ld\n", i);
-		__halt();
-	}
-
-	percpu = (struct percpu_struct *)
-		(INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB);
-	rev = percpu->pal_revision = percpu->palcode_avail[2];
-
-	srm_printk("Ok (rev %lx)\n", rev);
-
-	tbia(); /* do it directly in case we are SMP */
-}
-
-static inline long openboot(void)
-{
-	char bootdev[256];
-	long result;
-
-	result = callback_getenv(ENV_BOOTED_DEV, bootdev, 255);
-	if (result < 0)
-		return result;
-	return callback_open(bootdev, result & 255);
-}
-
-static inline long close(long dev)
-{
-	return callback_close(dev);
-}
-
-static inline long load(long dev, unsigned long addr, unsigned long count)
-{
-	char bootfile[256];
-	extern char _end;
-	long result, boot_size = &_end - (char *) BOOT_ADDR;
-
-	result = callback_getenv(ENV_BOOTED_FILE, bootfile, 255);
-	if (result < 0)
-		return result;
-	result &= 255;
-	bootfile[result] = '\0';
-	if (result)
-		srm_printk("Boot file specification (%s) not implemented\n",
-		       bootfile);
-	return callback_read(dev, count, (void *)addr, boot_size/512 + 1);
-}
-
-/*
- * Start the kernel.
- */
-static void runkernel(void)
-{
-	__asm__ __volatile__(
-		"bis %1,%1,$30\n\t"
-		"bis %0,%0,$26\n\t"
-		"ret ($26)"
-		: /* no outputs: it doesn't even return */
-		: "r" (START_ADDR),
-		  "r" (PAGE_SIZE + INIT_STACK));
-}
-
-void start_kernel(void)
-{
-	long i;
-	long dev;
-	int nbytes;
-	char envval[256];
-
-	srm_printk("Linux/AXP bootloader for Linux " UTS_RELEASE "\n");
-	if (INIT_HWRPB->pagesize != 8192) {
-		srm_printk("Expected 8kB pages, got %ldkB\n", INIT_HWRPB->pagesize >> 10);
-		return;
-	}
-	pal_init();
-	dev = openboot();
-	if (dev < 0) {
-		srm_printk("Unable to open boot device: %016lx\n", dev);
-		return;
-	}
-	dev &= 0xffffffff;
-	srm_printk("Loading vmlinux ...");
-	i = load(dev, START_ADDR, KERNEL_SIZE);
-	close(dev);
-	if (i != KERNEL_SIZE) {
-		srm_printk("Failed (%lx)\n", i);
-		return;
-	}
-
-	nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval));
-	if (nbytes < 0) {
-		nbytes = 0;
-	}
-	envval[nbytes] = '\0';
-	strcpy((char*)ZERO_PGE, envval);
-
-	srm_printk(" Ok\nNow booting the kernel\n");
-	runkernel();
-	for (i = 0 ; i < 0x100000000 ; i++)
-		/* nothing */;
-	__halt();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/boot/misc.c b/ANDROID_3.4.5/arch/alpha/boot/misc.c
deleted file mode 100644
index 3ff9a957..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/misc.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * misc.c
- * 
- * This is a collection of several routines from gzip-1.0.3 
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Modified for ARM Linux by Russell King
- *
- * Nicolas Pitre <nico@visuaide.com>  1999/04/14 :
- *  For this code to run directly from Flash, all constant variables must
- *  be marked with 'const' and all other variables initialized at run-time 
- *  only.  This way all non constant variables will end up in the bss segment,
- *  which should point to addresses in RAM and cleared to 0 on start.
- *  This allows for a much quicker boot time.
- *
- * Modified for Alpha, from the ARM version, by Jay Estabrook 2003.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include <asm/uaccess.h>
-
-#define memzero(s,n)	memset ((s),0,(n))
-#define puts		srm_printk
-extern long srm_printk(const char *, ...)
-     __attribute__ ((format (printf, 1, 2)));
-
-/*
- * gzip delarations
- */
-#define OF(args)  args
-#define STATIC static
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch *window;		/* Sliding window buffer */
-
-static unsigned insize;		/* valid bytes in inbuf */
-static unsigned inptr;		/* index of next byte to be processed in inbuf */
-static unsigned outcnt;		/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-static char *input_data;
-static int  input_data_size;
-
-static uch *output_data;
-static ulg output_ptr;
-static ulg bytes_out;
-
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
-
-extern int end;
-static ulg free_mem_ptr;
-static ulg free_mem_end_ptr;
-
-#define HEAP_SIZE 0x3000
-
-#include "../../../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-int fill_inbuf(void)
-{
-	if (insize != 0)
-		error("ran out of input data");
-
-	inbuf = input_data;
-	insize = input_data_size;
-
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window(void)
-{
-	ulg c = crc;
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-/*	puts("."); */
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-unsigned int
-decompress_kernel(void *output_start,
-		  void *input_start,
-		  size_t ksize,
-		  size_t kzsize)
-{
-	output_data		= (uch *)output_start;
-	input_data		= (uch *)input_start;
-	input_data_size		= kzsize; /* use compressed size */
-
-	/* FIXME FIXME FIXME */
-	free_mem_ptr		= (ulg)output_start + ksize;
-	free_mem_end_ptr	= (ulg)output_start + ksize + 0x200000;
-	/* FIXME FIXME FIXME */
-
-	/* put in temp area to reduce initial footprint */
-	window = malloc(WSIZE);
-
-	makecrc();
-/*	puts("Uncompressing Linux..."); */
-	gunzip();
-/*	puts(" done, booting the kernel.\n"); */
-	return output_ptr;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/boot/tools/mkbb.c b/ANDROID_3.4.5/arch/alpha/boot/tools/mkbb.c
deleted file mode 100644
index 1185778e..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/tools/mkbb.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* This utility makes a bootblock suitable for the SRM console/miniloader */
-
-/* Usage:
- *	mkbb <device> <lxboot>
- *
- * Where <device> is the name of the device to install the bootblock on,
- * and <lxboot> is the name of a bootblock to merge in.  This bootblock
- * contains the offset and size of the bootloader.  It must be exactly
- * 512 bytes long.
- */
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-
-/* Minimal definition of disklabel, so we don't have to include
- * asm/disklabel.h (confuses make)
- */
-#ifndef MAXPARTITIONS
-#define MAXPARTITIONS   8                       /* max. # of partitions */
-#endif
-
-#ifndef u8
-#define u8 unsigned char
-#endif
-
-#ifndef u16
-#define u16 unsigned short
-#endif
-
-#ifndef u32
-#define u32 unsigned int
-#endif
-
-struct disklabel {
-    u32	d_magic;				/* must be DISKLABELMAGIC */
-    u16	d_type, d_subtype;
-    u8	d_typename[16];
-    u8	d_packname[16];
-    u32	d_secsize;
-    u32	d_nsectors;
-    u32	d_ntracks;
-    u32	d_ncylinders;
-    u32	d_secpercyl;
-    u32	d_secprtunit;
-    u16	d_sparespertrack;
-    u16	d_sparespercyl;
-    u32	d_acylinders;
-    u16	d_rpm, d_interleave, d_trackskew, d_cylskew;
-    u32	d_headswitch, d_trkseek, d_flags;
-    u32	d_drivedata[5];
-    u32	d_spare[5];
-    u32	d_magic2;				/* must be DISKLABELMAGIC */
-    u16	d_checksum;
-    u16	d_npartitions;
-    u32	d_bbsize, d_sbsize;
-    struct d_partition {
-	u32	p_size;
-	u32	p_offset;
-	u32	p_fsize;
-	u8	p_fstype;
-	u8	p_frag;
-	u16	p_cpg;
-    } d_partitions[MAXPARTITIONS];
-};
-
-
-typedef union __bootblock {
-    struct {
-        char			__pad1[64];
-        struct disklabel	__label;
-    } __u1;
-    struct {
-	unsigned long		__pad2[63];
-	unsigned long		__checksum;
-    } __u2;
-    char		bootblock_bytes[512];
-    unsigned long	bootblock_quadwords[64];
-} bootblock;
-
-#define	bootblock_label		__u1.__label
-#define bootblock_checksum	__u2.__checksum
-
-int main(int argc, char ** argv)
-{
-    bootblock		bootblock_from_disk;
-    bootblock		bootloader_image;
-    int			dev, fd;
-    int			i;
-    int			nread;
-
-    /* Make sure of the arg count */
-    if(argc != 3) {
-	fprintf(stderr, "Usage: %s device lxboot\n", argv[0]);
-	exit(0);
-    }
-
-    /* First, open the device and make sure it's accessible */
-    dev = open(argv[1], O_RDWR);
-    if(dev < 0) {
-	perror(argv[1]);
-	exit(0);
-    }
-
-    /* Now open the lxboot and make sure it's reasonable */
-    fd = open(argv[2], O_RDONLY);
-    if(fd < 0) {
-	perror(argv[2]);
-	close(dev);
-	exit(0);
-    }
-
-    /* Read in the lxboot */
-    nread = read(fd, &bootloader_image, sizeof(bootblock));
-    if(nread != sizeof(bootblock)) {
-	perror("lxboot read");
-	fprintf(stderr, "expected %zd, got %d\n", sizeof(bootblock), nread);
-	exit(0);
-    }
-
-    /* Read in the bootblock from disk. */
-    nread = read(dev, &bootblock_from_disk, sizeof(bootblock));
-    if(nread != sizeof(bootblock)) {
-	perror("bootblock read");
-	fprintf(stderr, "expected %zd, got %d\n", sizeof(bootblock), nread);
-	exit(0);
-    }
-
-    /* Swap the bootblock's disklabel into the bootloader */
-    bootloader_image.bootblock_label = bootblock_from_disk.bootblock_label;
-
-    /* Calculate the bootblock checksum */
-    bootloader_image.bootblock_checksum = 0;
-    for(i = 0; i < 63; i++) {
-	bootloader_image.bootblock_checksum += 
-			bootloader_image.bootblock_quadwords[i];
-    }
-
-    /* Write the whole thing out! */
-    lseek(dev, 0L, SEEK_SET);
-    if(write(dev, &bootloader_image, sizeof(bootblock)) != sizeof(bootblock)) {
-	perror("bootblock write");
-	exit(0);
-    }
-
-    close(fd);
-    close(dev);
-    exit(0);
-}
-
-
diff --git a/ANDROID_3.4.5/arch/alpha/boot/tools/objstrip.c b/ANDROID_3.4.5/arch/alpha/boot/tools/objstrip.c
deleted file mode 100644
index 367d53d0..00000000
--- a/ANDROID_3.4.5/arch/alpha/boot/tools/objstrip.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * arch/alpha/boot/tools/objstrip.c
- *
- * Strip the object file headers/trailers from an executable (ELF or ECOFF).
- *
- * Copyright (C) 1996 David Mosberger-Tang.
- */
-/*
- * Converts an ECOFF or ELF object file into a bootable file.  The
- * object file must be a OMAGIC file (i.e., data and bss follow immediately
- * behind the text).  See DEC "Assembly Language Programmer's Guide"
- * documentation for details.  The SRM boot process is documented in
- * the Alpha AXP Architecture Reference Manual, Second Edition by
- * Richard L. Sites and Richard T. Witek.
- */
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include <sys/fcntl.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-
-#include <linux/a.out.h>
-#include <linux/coff.h>
-#include <linux/param.h>
-#ifdef __ELF__
-# include <linux/elf.h>
-#endif
-
-/* bootfile size must be multiple of BLOCK_SIZE: */
-#define BLOCK_SIZE	512
-
-const char * prog_name;
-
-
-static void
-usage (void)
-{
-    fprintf(stderr,
-	    "usage: %s [-v] -p file primary\n"
-	    "       %s [-vb] file [secondary]\n", prog_name, prog_name);
-    exit(1);
-}
-
-
-int
-main (int argc, char *argv[])
-{
-    size_t nwritten, tocopy, n, mem_size, fil_size, pad = 0;
-    int fd, ofd, i, j, verbose = 0, primary = 0;
-    char buf[8192], *inname;
-    struct exec * aout;		/* includes file & aout header */
-    long offset;
-#ifdef __ELF__
-    struct elfhdr *elf;
-    struct elf_phdr *elf_phdr;	/* program header */
-    unsigned long long e_entry;
-#endif
-
-    prog_name = argv[0];
-
-    for (i = 1; i < argc && argv[i][0] == '-'; ++i) {
-	for (j = 1; argv[i][j]; ++j) {
-	    switch (argv[i][j]) {
-	      case 'v':
-		  verbose = ~verbose;
-		  break;
-
-	      case 'b':
-		  pad = BLOCK_SIZE;
-		  break;
-
-	      case 'p':
-		  primary = 1;		/* make primary bootblock */
-		  break;
-	    }
-	}
-    }
-
-    if (i >= argc) {
-	usage();
-    }
-    inname = argv[i++];
-
-    fd = open(inname, O_RDONLY);
-    if (fd == -1) {
-	perror("open");
-	exit(1);
-    }
-
-    ofd = 1;
-    if (i < argc) {
-	ofd = open(argv[i++], O_WRONLY | O_CREAT | O_TRUNC, 0666);
-	if (ofd == -1) {
-	    perror("open");
-	    exit(1);
-	}
-    }
-
-    if (primary) {
-	/* generate bootblock for primary loader */
-	
-	unsigned long bb[64], sum = 0;
-	struct stat st;
-	off_t size;
-	int i;
-
-	if (ofd == 1) {
-	    usage();
-	}
-
-	if (fstat(fd, &st) == -1) {
-	    perror("fstat");
-	    exit(1);
-	}
-
-	size = (st.st_size + BLOCK_SIZE - 1) & ~(BLOCK_SIZE - 1);
-	memset(bb, 0, sizeof(bb));
-	strcpy((char *) bb, "Linux SRM bootblock");
-	bb[60] = size / BLOCK_SIZE;	/* count */
-	bb[61] = 1;			/* starting sector # */
-	bb[62] = 0;			/* flags---must be 0 */
-	for (i = 0; i < 63; ++i) {
-	    sum += bb[i];
-	}
-	bb[63] = sum;
-	if (write(ofd, bb, sizeof(bb)) != sizeof(bb)) {
-	    perror("boot-block write");
-	    exit(1);
-	}
-	printf("%lu\n", size);
-	return 0;
-    }
-
-    /* read and inspect exec header: */
-
-    if (read(fd, buf, sizeof(buf)) < 0) {
-	perror("read");
-	exit(1);
-    }
-
-#ifdef __ELF__
-    elf = (struct elfhdr *) buf;
-
-    if (elf->e_ident[0] == 0x7f && strncmp((char *)elf->e_ident + 1, "ELF", 3) == 0) {
-	if (elf->e_type != ET_EXEC) {
-	    fprintf(stderr, "%s: %s is not an ELF executable\n",
-		    prog_name, inname);
-	    exit(1);
-	}
-	if (!elf_check_arch(elf)) {
-	    fprintf(stderr, "%s: is not for this processor (e_machine=%d)\n",
-		    prog_name, elf->e_machine);
-	    exit(1);
-	}
-	if (elf->e_phnum != 1) {
-	    fprintf(stderr,
-		    "%s: %d program headers (forgot to link with -N?)\n",
-		    prog_name, elf->e_phnum);
-	}
-
-	e_entry = elf->e_entry;
-
-	lseek(fd, elf->e_phoff, SEEK_SET);
-	if (read(fd, buf, sizeof(*elf_phdr)) != sizeof(*elf_phdr)) {
-	    perror("read");
-	    exit(1);
-	}
-
-	elf_phdr = (struct elf_phdr *) buf;
-	offset	 = elf_phdr->p_offset;
-	mem_size = elf_phdr->p_memsz;
-	fil_size = elf_phdr->p_filesz;
-
-	/* work around ELF bug: */
-	if (elf_phdr->p_vaddr < e_entry) {
-	    unsigned long delta = e_entry - elf_phdr->p_vaddr;
-	    offset   += delta;
-	    mem_size -= delta;
-	    fil_size -= delta;
-	    elf_phdr->p_vaddr += delta;
-	}
-
-	if (verbose) {
-	    fprintf(stderr, "%s: extracting %#016lx-%#016lx (at %lx)\n",
-		    prog_name, (long) elf_phdr->p_vaddr,
-		    elf_phdr->p_vaddr + fil_size, offset);
-	}
-    } else
-#endif
-    {
-	aout = (struct exec *) buf;
-
-	if (!(aout->fh.f_flags & COFF_F_EXEC)) {
-	    fprintf(stderr, "%s: %s is not in executable format\n",
-		    prog_name, inname);
-	    exit(1);
-	}
-
-	if (aout->fh.f_opthdr != sizeof(aout->ah)) {
-	    fprintf(stderr, "%s: %s has unexpected optional header size\n",
-		    prog_name, inname);
-	    exit(1);
-	}
-
-	if (N_MAGIC(*aout) != OMAGIC) {
-	    fprintf(stderr, "%s: %s is not an OMAGIC file\n",
-		    prog_name, inname);
-	    exit(1);
-	}
-	offset = N_TXTOFF(*aout);
-	fil_size = aout->ah.tsize + aout->ah.dsize;
-	mem_size = fil_size + aout->ah.bsize;
-
-	if (verbose) {
-	    fprintf(stderr, "%s: extracting %#016lx-%#016lx (at %lx)\n",
-		    prog_name, aout->ah.text_start,
-		    aout->ah.text_start + fil_size, offset);
-	}
-    }
-
-    if (lseek(fd, offset, SEEK_SET) != offset) {
-	perror("lseek");
-	exit(1);
-    }
-
-    if (verbose) {
-	fprintf(stderr, "%s: copying %lu byte from %s\n",
-		prog_name, (unsigned long) fil_size, inname);
-    }
-
-    tocopy = fil_size;
-    while (tocopy > 0) {
-	n = tocopy;
-	if (n > sizeof(buf)) {
-	    n = sizeof(buf);
-	}
-	tocopy -= n;
-	if ((size_t) read(fd, buf, n) != n) {
-	    perror("read");
-	    exit(1);
-	}
-	do {
-	    nwritten = write(ofd, buf, n);
-	    if ((ssize_t) nwritten == -1) {
-		perror("write");
-		exit(1);
-	    }
-	    n -= nwritten;
-	} while (n > 0);
-    }
-
-    if (pad) {
-	mem_size = ((mem_size + pad - 1) / pad) * pad;
-    }
-
-    tocopy = mem_size - fil_size;
-    if (tocopy > 0) {
-	fprintf(stderr,
-		"%s: zero-filling bss and aligning to %lu with %lu bytes\n",
-		prog_name, pad, (unsigned long) tocopy);
-
-	memset(buf, 0x00, sizeof(buf));
-	do {
-	    n = tocopy;
-	    if (n > sizeof(buf)) {
-		n = sizeof(buf);
-	    }
-	    nwritten = write(ofd, buf, n);
-	    if ((ssize_t) nwritten == -1) {
-		perror("write");
-		exit(1);
-	    }
-	    tocopy -= nwritten;
-	} while (tocopy > 0);
-    }
-    return 0;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/defconfig b/ANDROID_3.4.5/arch/alpha/defconfig
deleted file mode 100644
index 539e8b5a..00000000
--- a/ANDROID_3.4.5/arch/alpha/defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_VERBOSE_MCHECK=y
-CONFIG_SRM_ENV=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_VLAN_8021Q=m
-CONFIG_PNP=y
-CONFIG_ISAPNP=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_ALI15X3=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CY82C693=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_TULIP=y
-CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
-CONFIG_YELLOWFIN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_RTC=y
-CONFIG_EXT2_FS=y
-CONFIG_REISERFS_FS=m
-CONFIG_AUTOFS_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_ALPHA_LEGACY_START_ADDRESS=y
-CONFIG_MATHEMU=y
-CONFIG_CRYPTO_HMAC=y
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/Kbuild b/ANDROID_3.4.5/arch/alpha/include/asm/Kbuild
deleted file mode 100644
index e423defe..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/Kbuild
+++ /dev/null
@@ -1,10 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += compiler.h
-header-y += console.h
-header-y += fpu.h
-header-y += gentrap.h
-header-y += pal.h
-header-y += reg.h
-header-y += regdef.h
-header-y += sysinfo.h
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/a.out-core.h b/ANDROID_3.4.5/arch/alpha/include/asm/a.out-core.h
deleted file mode 100644
index 9e33e92e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/a.out-core.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-
-/*
- * Fill in the user structure for an ECOFF core dump.
- */
-static inline void aout_dump_thread(struct pt_regs *pt, struct user *dump)
-{
-	/* switch stack follows right below pt_regs: */
-	struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
-
-	dump->magic = CMAGIC;
-	dump->start_code  = current->mm->start_code;
-	dump->start_data  = current->mm->start_data;
-	dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
-	dump->u_tsize = ((current->mm->end_code - dump->start_code)
-			 >> PAGE_SHIFT);
-	dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data)
-			 >> PAGE_SHIFT);
-	dump->u_ssize = (current->mm->start_stack - dump->start_stack
-			 + PAGE_SIZE-1) >> PAGE_SHIFT;
-
-	/*
-	 * We store the registers in an order/format that is
-	 * compatible with DEC Unix/OSF/1 as this makes life easier
-	 * for gdb.
-	 */
-	dump->regs[EF_V0]  = pt->r0;
-	dump->regs[EF_T0]  = pt->r1;
-	dump->regs[EF_T1]  = pt->r2;
-	dump->regs[EF_T2]  = pt->r3;
-	dump->regs[EF_T3]  = pt->r4;
-	dump->regs[EF_T4]  = pt->r5;
-	dump->regs[EF_T5]  = pt->r6;
-	dump->regs[EF_T6]  = pt->r7;
-	dump->regs[EF_T7]  = pt->r8;
-	dump->regs[EF_S0]  = sw->r9;
-	dump->regs[EF_S1]  = sw->r10;
-	dump->regs[EF_S2]  = sw->r11;
-	dump->regs[EF_S3]  = sw->r12;
-	dump->regs[EF_S4]  = sw->r13;
-	dump->regs[EF_S5]  = sw->r14;
-	dump->regs[EF_S6]  = sw->r15;
-	dump->regs[EF_A3]  = pt->r19;
-	dump->regs[EF_A4]  = pt->r20;
-	dump->regs[EF_A5]  = pt->r21;
-	dump->regs[EF_T8]  = pt->r22;
-	dump->regs[EF_T9]  = pt->r23;
-	dump->regs[EF_T10] = pt->r24;
-	dump->regs[EF_T11] = pt->r25;
-	dump->regs[EF_RA]  = pt->r26;
-	dump->regs[EF_T12] = pt->r27;
-	dump->regs[EF_AT]  = pt->r28;
-	dump->regs[EF_SP]  = rdusp();
-	dump->regs[EF_PS]  = pt->ps;
-	dump->regs[EF_PC]  = pt->pc;
-	dump->regs[EF_GP]  = pt->gp;
-	dump->regs[EF_A0]  = pt->r16;
-	dump->regs[EF_A1]  = pt->r17;
-	dump->regs[EF_A2]  = pt->r18;
-	memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/a.out.h b/ANDROID_3.4.5/arch/alpha/include/asm/a.out.h
deleted file mode 100644
index acdc6812..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/a.out.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef __ALPHA_A_OUT_H__
-#define __ALPHA_A_OUT_H__
-
-#include <linux/types.h>
-
-/*
- * OSF/1 ECOFF header structs.  ECOFF files consist of:
- * 	- a file header (struct filehdr),
- *	- an a.out header (struct aouthdr),
- *	- one or more section headers (struct scnhdr). 
- *	  The filhdr's "f_nscns" field contains the
- *	  number of section headers.
- */
-
-struct filehdr
-{
-	/* OSF/1 "file" header */
-	__u16 f_magic, f_nscns;
-	__u32 f_timdat;
-	__u64 f_symptr;
-	__u32 f_nsyms;
-	__u16 f_opthdr, f_flags;
-};
-
-struct aouthdr
-{
-	__u64 info;		/* after that it looks quite normal.. */
-	__u64 tsize;
-	__u64 dsize;
-	__u64 bsize;
-	__u64 entry;
-	__u64 text_start;	/* with a few additions that actually make sense */
-	__u64 data_start;
-	__u64 bss_start;
-	__u32 gprmask, fprmask;	/* bitmask of general & floating point regs used in binary */
-	__u64 gpvalue;
-};
-
-struct scnhdr
-{
-	char	s_name[8];
-	__u64	s_paddr;
-	__u64	s_vaddr;
-	__u64	s_size;
-	__u64	s_scnptr;
-	__u64	s_relptr;
-	__u64	s_lnnoptr;
-	__u16	s_nreloc;
-	__u16	s_nlnno;
-	__u32	s_flags;
-};
-
-struct exec
-{
-	/* OSF/1 "file" header */
-	struct filehdr		fh;
-	struct aouthdr		ah;
-};
-
-/*
- * Define's so that the kernel exec code can access the a.out header
- * fields...
- */
-#define	a_info		ah.info
-#define	a_text		ah.tsize
-#define a_data		ah.dsize
-#define a_bss		ah.bsize
-#define a_entry		ah.entry
-#define a_textstart	ah.text_start
-#define	a_datastart	ah.data_start
-#define	a_bssstart	ah.bss_start
-#define	a_gprmask	ah.gprmask
-#define a_fprmask	ah.fprmask
-#define a_gpvalue	ah.gpvalue
-
-#define N_TXTADDR(x) ((x).a_textstart)
-#define N_DATADDR(x) ((x).a_datastart)
-#define N_BSSADDR(x) ((x).a_bssstart)
-#define N_DRSIZE(x) 0
-#define N_TRSIZE(x) 0
-#define N_SYMSIZE(x) 0
-
-#define AOUTHSZ		sizeof(struct aouthdr)
-#define SCNHSZ		sizeof(struct scnhdr)
-#define SCNROUND	16
-
-#define N_TXTOFF(x) \
-  ((long) N_MAGIC(x) == ZMAGIC ? 0 : \
-   (sizeof(struct exec) + (x).fh.f_nscns*SCNHSZ + SCNROUND - 1) & ~(SCNROUND - 1))
-
-#ifdef __KERNEL__
-
-/* Assume that start addresses below 4G belong to a TASO application.
-   Unfortunately, there is no proper bit in the exec header to check.
-   Worse, we have to notice the start address before swapping to use
-   /sbin/loader, which of course is _not_ a TASO application.  */
-#define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
-			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-
-#endif /* __KERNEL__ */
-#endif /* __A_OUT_GNU_H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/agp.h b/ANDROID_3.4.5/arch/alpha/include/asm/agp.h
deleted file mode 100644
index a94d48b8..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/agp.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef AGP_H
-#define AGP_H 1
-
-#include <asm/io.h>
-
-/* dummy for now */
-
-#define map_page_into_agp(page) 
-#define unmap_page_from_agp(page) 
-#define flush_agp_cache() mb()
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/agp_backend.h b/ANDROID_3.4.5/arch/alpha/include/asm/agp_backend.h
deleted file mode 100644
index 55dd44a2..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/agp_backend.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ALPHA_AGP_BACKEND_H
-#define _ALPHA_AGP_BACKEND_H 1
-
-typedef	union _alpha_agp_mode {
-	struct {
-		u32 rate : 3;
-		u32 reserved0 : 1;
-		u32 fw : 1;
-		u32 fourgb : 1;
-		u32 reserved1 : 2;
-		u32 enable : 1;
-		u32 sba : 1;
-		u32 reserved2 : 14;
-		u32 rq : 8;
-	} bits;
-	u32 lw;
-} alpha_agp_mode;
-
-typedef struct _alpha_agp_info {
-	struct pci_controller *hose;
-	struct {
-		dma_addr_t bus_base;
-		unsigned long size;
-		void *sysdata;
-	} aperture;
-	alpha_agp_mode capability;
-	alpha_agp_mode mode;
-	void *private;
-	struct alpha_agp_ops *ops;
-} alpha_agp_info;
-
-struct alpha_agp_ops {
-	int (*setup)(alpha_agp_info *);
-	void (*cleanup)(alpha_agp_info *);
-	int (*configure)(alpha_agp_info *);
-	int (*bind)(alpha_agp_info *, off_t, struct agp_memory *);
-	int (*unbind)(alpha_agp_info *, off_t, struct agp_memory *);
-	unsigned long (*translate)(alpha_agp_info *, dma_addr_t);
-};
-
-
-#endif /* _ALPHA_AGP_BACKEND_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/asm-offsets.h b/ANDROID_3.4.5/arch/alpha/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/atomic.h b/ANDROID_3.4.5/arch/alpha/include/asm/atomic.h
deleted file mode 100644
index 3bb7ffea..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/atomic.h
+++ /dev/null
@@ -1,258 +0,0 @@
-#ifndef _ALPHA_ATOMIC_H
-#define _ALPHA_ATOMIC_H
-
-#include <linux/types.h>
-#include <asm/barrier.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc...
- *
- * But use these as seldom as possible since they are much slower
- * than regular operations.
- */
-
-
-#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
-#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
-
-#define atomic_read(v)		(*(volatile int *)&(v)->counter)
-#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
-
-#define atomic_set(v,i)		((v)->counter = (i))
-#define atomic64_set(v,i)	((v)->counter = (i))
-
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-static __inline__ void atomic_add(int i, atomic_t * v)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%1\n"
-	"	addl %0,%2,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter)
-	:"Ir" (i), "m" (v->counter));
-}
-
-static __inline__ void atomic64_add(long i, atomic64_t * v)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%1\n"
-	"	addq %0,%2,%0\n"
-	"	stq_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter)
-	:"Ir" (i), "m" (v->counter));
-}
-
-static __inline__ void atomic_sub(int i, atomic_t * v)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%1\n"
-	"	subl %0,%2,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter)
-	:"Ir" (i), "m" (v->counter));
-}
-
-static __inline__ void atomic64_sub(long i, atomic64_t * v)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%1\n"
-	"	subq %0,%2,%0\n"
-	"	stq_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter)
-	:"Ir" (i), "m" (v->counter));
-}
-
-
-/*
- * Same as above, but return the result value
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	long temp, result;
-	smp_mb();
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%1\n"
-	"	addl %0,%3,%2\n"
-	"	addl %0,%3,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
-	:"Ir" (i), "m" (v->counter) : "memory");
-	smp_mb();
-	return result;
-}
-
-static __inline__ long atomic64_add_return(long i, atomic64_t * v)
-{
-	long temp, result;
-	smp_mb();
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%1\n"
-	"	addq %0,%3,%2\n"
-	"	addq %0,%3,%0\n"
-	"	stq_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
-	:"Ir" (i), "m" (v->counter) : "memory");
-	smp_mb();
-	return result;
-}
-
-static __inline__ long atomic_sub_return(int i, atomic_t * v)
-{
-	long temp, result;
-	smp_mb();
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%1\n"
-	"	subl %0,%3,%2\n"
-	"	subl %0,%3,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
-	:"Ir" (i), "m" (v->counter) : "memory");
-	smp_mb();
-	return result;
-}
-
-static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
-{
-	long temp, result;
-	smp_mb();
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%1\n"
-	"	subq %0,%3,%2\n"
-	"	subq %0,%3,%0\n"
-	"	stq_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
-	:"Ir" (i), "m" (v->counter) : "memory");
-	smp_mb();
-	return result;
-}
-
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * __atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
-static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c;
-}
-
-
-/**
- * atomic64_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-	long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic64_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic64_dec_return(v) atomic64_sub_return(1,(v))
-
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-#define atomic64_inc_return(v) atomic64_add_return(1,(v))
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
-
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0)
-
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
-
-#define atomic_inc(v) atomic_add(1,(v))
-#define atomic64_inc(v) atomic64_add(1,(v))
-
-#define atomic_dec(v) atomic_sub(1,(v))
-#define atomic64_dec(v) atomic64_sub(1,(v))
-
-#define smp_mb__before_atomic_dec()	smp_mb()
-#define smp_mb__after_atomic_dec()	smp_mb()
-#define smp_mb__before_atomic_inc()	smp_mb()
-#define smp_mb__after_atomic_inc()	smp_mb()
-
-#endif /* _ALPHA_ATOMIC_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/auxvec.h b/ANDROID_3.4.5/arch/alpha/include/asm/auxvec.h
deleted file mode 100644
index a3a579df..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/auxvec.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_ALPHA_AUXVEC_H
-#define __ASM_ALPHA_AUXVEC_H
-
-/* Reserve these numbers for any future use of a VDSO.  */
-#if 0
-#define AT_SYSINFO		32
-#define AT_SYSINFO_EHDR		33
-#endif
-
-/* More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
-   value is -1, then the cache doesn't exist.  Otherwise:
-
-      bit 0-3:	  Cache set-associativity; 0 means fully associative.
-      bit 4-7:	  Log2 of cacheline size.
-      bit 8-31:	  Size of the entire cache >> 8.
-      bit 32-63:  Reserved.
-*/
-
-#define AT_L1I_CACHESHAPE	34
-#define AT_L1D_CACHESHAPE	35
-#define AT_L2_CACHESHAPE	36
-#define AT_L3_CACHESHAPE	37
-
-#define AT_VECTOR_SIZE_ARCH 4 /* entries in ARCH_DLINFO */
-
-#endif /* __ASM_ALPHA_AUXVEC_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/barrier.h b/ANDROID_3.4.5/arch/alpha/include/asm/barrier.h
deleted file mode 100644
index ce8860a0..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/barrier.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef __BARRIER_H
-#define __BARRIER_H
-
-#include <asm/compiler.h>
-
-#define mb() \
-__asm__ __volatile__("mb": : :"memory")
-
-#define rmb() \
-__asm__ __volatile__("mb": : :"memory")
-
-#define wmb() \
-__asm__ __volatile__("wmb": : :"memory")
-
-#define read_barrier_depends() \
-__asm__ __volatile__("mb": : :"memory")
-
-#ifdef CONFIG_SMP
-#define __ASM_SMP_MB	"\tmb\n"
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define __ASM_SMP_MB
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while (0)
-#endif
-
-#define set_mb(var, value) \
-do { var = value; mb(); } while (0)
-
-#endif		/* __BARRIER_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/bitops.h b/ANDROID_3.4.5/arch/alpha/include/asm/bitops.h
deleted file mode 100644
index a19ba5ef..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/bitops.h
+++ /dev/null
@@ -1,463 +0,0 @@
-#ifndef _ALPHA_BITOPS_H
-#define _ALPHA_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <asm/compiler.h>
-#include <asm/barrier.h>
-
-/*
- * Copyright 1994, Linus Torvalds.
- */
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- *
- * bit 0 is the LSB of addr; bit 64 is the LSB of (addr+1).
- */
-
-static inline void
-set_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%3\n"
-	"	bis %0,%2,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m)
-	:"Ir" (1UL << (nr & 31)), "m" (*m));
-}
-
-/*
- * WARNING: non atomic version.
- */
-static inline void
-__set_bit(unsigned long nr, volatile void * addr)
-{
-	int *m = ((int *) addr) + (nr >> 5);
-
-	*m |= 1 << (nr & 31);
-}
-
-#define smp_mb__before_clear_bit()	smp_mb()
-#define smp_mb__after_clear_bit()	smp_mb()
-
-static inline void
-clear_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%3\n"
-	"	bic %0,%2,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m)
-	:"Ir" (1UL << (nr & 31)), "m" (*m));
-}
-
-static inline void
-clear_bit_unlock(unsigned long nr, volatile void * addr)
-{
-	smp_mb();
-	clear_bit(nr, addr);
-}
-
-/*
- * WARNING: non atomic version.
- */
-static __inline__ void
-__clear_bit(unsigned long nr, volatile void * addr)
-{
-	int *m = ((int *) addr) + (nr >> 5);
-
-	*m &= ~(1 << (nr & 31));
-}
-
-static inline void
-__clear_bit_unlock(unsigned long nr, volatile void * addr)
-{
-	smp_mb();
-	__clear_bit(nr, addr);
-}
-
-static inline void
-change_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%3\n"
-	"	xor %0,%2,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m)
-	:"Ir" (1UL << (nr & 31)), "m" (*m));
-}
-
-/*
- * WARNING: non atomic version.
- */
-static __inline__ void
-__change_bit(unsigned long nr, volatile void * addr)
-{
-	int *m = ((int *) addr) + (nr >> 5);
-
-	*m ^= 1 << (nr & 31);
-}
-
-static inline int
-test_and_set_bit(unsigned long nr, volatile void *addr)
-{
-	unsigned long oldbit;
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	"1:	ldl_l %0,%4\n"
-	"	and %0,%3,%2\n"
-	"	bne %2,2f\n"
-	"	xor %0,%3,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,3f\n"
-	"2:\n"
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
-	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
-
-	return oldbit != 0;
-}
-
-static inline int
-test_and_set_bit_lock(unsigned long nr, volatile void *addr)
-{
-	unsigned long oldbit;
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%4\n"
-	"	and %0,%3,%2\n"
-	"	bne %2,2f\n"
-	"	xor %0,%3,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,3f\n"
-	"2:\n"
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
-	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
-
-	return oldbit != 0;
-}
-
-/*
- * WARNING: non atomic version.
- */
-static inline int
-__test_and_set_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long mask = 1 << (nr & 0x1f);
-	int *m = ((int *) addr) + (nr >> 5);
-	int old = *m;
-
-	*m = old | mask;
-	return (old & mask) != 0;
-}
-
-static inline int
-test_and_clear_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long oldbit;
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	"1:	ldl_l %0,%4\n"
-	"	and %0,%3,%2\n"
-	"	beq %2,2f\n"
-	"	xor %0,%3,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,3f\n"
-	"2:\n"
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
-	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
-
-	return oldbit != 0;
-}
-
-/*
- * WARNING: non atomic version.
- */
-static inline int
-__test_and_clear_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long mask = 1 << (nr & 0x1f);
-	int *m = ((int *) addr) + (nr >> 5);
-	int old = *m;
-
-	*m = old & ~mask;
-	return (old & mask) != 0;
-}
-
-static inline int
-test_and_change_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long oldbit;
-	unsigned long temp;
-	int *m = ((int *) addr) + (nr >> 5);
-
-	__asm__ __volatile__(
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	"1:	ldl_l %0,%4\n"
-	"	and %0,%3,%2\n"
-	"	xor %0,%3,%0\n"
-	"	stl_c %0,%1\n"
-	"	beq %0,3f\n"
-#ifdef CONFIG_SMP
-	"	mb\n"
-#endif
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
-	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
-
-	return oldbit != 0;
-}
-
-/*
- * WARNING: non atomic version.
- */
-static __inline__ int
-__test_and_change_bit(unsigned long nr, volatile void * addr)
-{
-	unsigned long mask = 1 << (nr & 0x1f);
-	int *m = ((int *) addr) + (nr >> 5);
-	int old = *m;
-
-	*m = old ^ mask;
-	return (old & mask) != 0;
-}
-
-static inline int
-test_bit(int nr, const volatile void * addr)
-{
-	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
-}
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- *
- * Do a binary search on the bits.  Due to the nature of large
- * constants on the alpha, it is worthwhile to split the search.
- */
-static inline unsigned long ffz_b(unsigned long x)
-{
-	unsigned long sum, x1, x2, x4;
-
-	x = ~x & -~x;		/* set first 0 bit, clear others */
-	x1 = x & 0xAA;
-	x2 = x & 0xCC;
-	x4 = x & 0xF0;
-	sum = x2 ? 2 : 0;
-	sum += (x4 != 0) * 4;
-	sum += (x1 != 0);
-
-	return sum;
-}
-
-static inline unsigned long ffz(unsigned long word)
-{
-#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-	/* Whee.  EV67 can calculate it directly.  */
-	return __kernel_cttz(~word);
-#else
-	unsigned long bits, qofs, bofs;
-
-	bits = __kernel_cmpbge(word, ~0UL);
-	qofs = ffz_b(bits);
-	bits = __kernel_extbl(word, qofs);
-	bofs = ffz_b(bits);
-
-	return qofs*8 + bofs;
-#endif
-}
-
-/*
- * __ffs = Find First set bit in word.  Undefined if no set bit exists.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-	/* Whee.  EV67 can calculate it directly.  */
-	return __kernel_cttz(word);
-#else
-	unsigned long bits, qofs, bofs;
-
-	bits = __kernel_cmpbge(0, word);
-	qofs = ffz_b(bits);
-	bits = __kernel_extbl(word, qofs);
-	bofs = ffz_b(~bits);
-
-	return qofs*8 + bofs;
-#endif
-}
-
-#ifdef __KERNEL__
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above __ffs.
- */
-
-static inline int ffs(int word)
-{
-	int result = __ffs(word) + 1;
-	return word ? result : 0;
-}
-
-/*
- * fls: find last bit set.
- */
-#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
-{
-	return 64 - __kernel_ctlz(word);
-}
-#else
-extern const unsigned char __flsm1_tab[256];
-
-static inline int fls64(unsigned long x)
-{
-	unsigned long t, a, r;
-
-	t = __kernel_cmpbge (x, 0x0101010101010101UL);
-	a = __flsm1_tab[t];
-	t = __kernel_extbl (x, a);
-	r = a*8 + __flsm1_tab[t] + (x != 0);
-
-	return r;
-}
-#endif
-
-static inline unsigned long __fls(unsigned long x)
-{
-	return fls64(x) - 1;
-}
-
-static inline int fls(int x)
-{
-	return fls64((unsigned int) x);
-}
-
-/*
- * hweightN: returns the hamming weight (i.e. the number
- * of bits set) of a N-bit word
- */
-
-#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-/* Whee.  EV67 can calculate it directly.  */
-static inline unsigned long __arch_hweight64(unsigned long w)
-{
-	return __kernel_ctpop(w);
-}
-
-static inline unsigned int __arch_hweight32(unsigned int w)
-{
-	return __arch_hweight64(w);
-}
-
-static inline unsigned int __arch_hweight16(unsigned int w)
-{
-	return __arch_hweight64(w & 0xffff);
-}
-
-static inline unsigned int __arch_hweight8(unsigned int w)
-{
-	return __arch_hweight64(w & 0xff);
-}
-#else
-#include <asm-generic/bitops/arch_hweight.h>
-#endif
-
-#include <asm-generic/bitops/const_hweight.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/find.h>
-
-#ifdef __KERNEL__
-
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 100-bit bitmap.  It's guaranteed that at least
- * one of the 100 bits is cleared.
- */
-static inline unsigned long
-sched_find_first_bit(const unsigned long b[2])
-{
-	unsigned long b0, b1, ofs, tmp;
-
-	b0 = b[0];
-	b1 = b[1];
-	ofs = (b0 ? 0 : 64);
-	tmp = (b0 ? b0 : b1);
-
-	return __ffs(tmp) + ofs;
-}
-
-#include <asm-generic/bitops/le.h>
-
-#include <asm-generic/bitops/ext2-atomic-setbit.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ALPHA_BITOPS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/bitsperlong.h b/ANDROID_3.4.5/arch/alpha/include/asm/bitsperlong.h
deleted file mode 100644
index ad57f786..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/bitsperlong.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_ALPHA_BITSPERLONG_H
-#define __ASM_ALPHA_BITSPERLONG_H
-
-#define __BITS_PER_LONG 64
-
-#include <asm-generic/bitsperlong.h>
-
-#endif /* __ASM_ALPHA_BITSPERLONG_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/bug.h b/ANDROID_3.4.5/arch/alpha/include/asm/bug.h
deleted file mode 100644
index f091682e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/bug.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ALPHA_BUG_H
-#define _ALPHA_BUG_H
-
-#include <linux/linkage.h>
-
-#ifdef CONFIG_BUG
-#include <asm/pal.h>
-
-/* ??? Would be nice to use .gprel32 here, but we can't be sure that the
-   function loaded the GP, so this could fail in modules.  */
-#define BUG()	do {							\
-	__asm__ __volatile__(						\
-		"call_pal %0  # bugchk\n\t"				\
-		".long %1\n\t.8byte %2"					\
-		: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__));	\
-	unreachable();							\
-  } while (0)
-
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/bugs.h b/ANDROID_3.4.5/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/byteorder.h b/ANDROID_3.4.5/arch/alpha/include/asm/byteorder.h
deleted file mode 100644
index 73683093..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ALPHA_BYTEORDER_H
-#define _ALPHA_BYTEORDER_H
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* _ALPHA_BYTEORDER_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/cache.h b/ANDROID_3.4.5/arch/alpha/include/asm/cache.h
deleted file mode 100644
index ad368a93..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/cache.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-alpha/cache.h
- */
-#ifndef __ARCH_ALPHA_CACHE_H
-#define __ARCH_ALPHA_CACHE_H
-
-
-/* Bytes per L1 (data) cache line. */
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EV6)
-# define L1_CACHE_BYTES     64
-# define L1_CACHE_SHIFT     6
-#else
-/* Both EV4 and EV5 are write-through, read-allocate,
-   direct-mapped, physical.
-*/
-# define L1_CACHE_BYTES     32
-# define L1_CACHE_SHIFT     5
-#endif
-
-#define SMP_CACHE_BYTES    L1_CACHE_BYTES
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/cacheflush.h b/ANDROID_3.4.5/arch/alpha/include/asm/cacheflush.h
deleted file mode 100644
index a9cb6aa4..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/cacheflush.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _ALPHA_CACHEFLUSH_H
-#define _ALPHA_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-/* Caches aren't brain-dead on the Alpha. */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-/* Note that the following two definitions are _highly_ dependent
-   on the contexts in which they are used in the kernel.  I personally
-   think it is criminal how loosely defined these macros are.  */
-
-/* We need to flush the kernel's icache after loading modules.  The
-   only other use of this macro is in load_aout_interp which is not
-   used on Alpha. 
-
-   Note that this definition should *not* be used for userspace
-   icache flushing.  While functional, it is _way_ overkill.  The
-   icache is tagged with ASNs and it suffices to allocate a new ASN
-   for the process.  */
-#ifndef CONFIG_SMP
-#define flush_icache_range(start, end)		imb()
-#else
-#define flush_icache_range(start, end)		smp_imb()
-extern void smp_imb(void);
-#endif
-
-/* We need to flush the userspace icache after setting breakpoints in
-   ptrace.
-
-   Instead of indiscriminately using imb, take advantage of the fact
-   that icache entries are tagged with the ASN and load a new mm context.  */
-/* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
-
-#ifndef CONFIG_SMP
-#include <linux/sched.h>
-
-extern void __load_new_mm_context(struct mm_struct *);
-static inline void
-flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			unsigned long addr, int len)
-{
-	if (vma->vm_flags & VM_EXEC) {
-		struct mm_struct *mm = vma->vm_mm;
-		if (current->active_mm == mm)
-			__load_new_mm_context(mm);
-		else
-			mm->context[smp_processor_id()] = 0;
-	}
-}
-#else
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-		struct page *page, unsigned long addr, int len);
-#endif
-
-/* This is used only in __do_fault and do_swap_page.  */
-#define flush_icache_page(vma, page) \
-  flush_icache_user_range((vma), (page), 0, 0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
-     flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#endif /* _ALPHA_CACHEFLUSH_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/checksum.h b/ANDROID_3.4.5/arch/alpha/include/asm/checksum.h
deleted file mode 100644
index d3854bbf..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/checksum.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _ALPHA_CHECKSUM_H
-#define _ALPHA_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					   unsigned short len,
-					   unsigned short proto,
-					   __wsum sum);
-
-__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				unsigned short len, unsigned short proto,
-				__wsum sum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *errp);
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-/*
- *	Fold a partial checksum without adding pseudo headers
- */
-
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-	sum = (sum & 0xffff) + (sum >> 16);
-	sum = (sum & 0xffff) + (sum >> 16);
-	return (__force __sum16)~sum;
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-			       const struct in6_addr *daddr,
-			       __u32 len, unsigned short proto,
-			       __wsum sum);
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/cmpxchg.h b/ANDROID_3.4.5/arch/alpha/include/asm/cmpxchg.h
deleted file mode 100644
index 429e8cd0..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _ALPHA_CMPXCHG_H
-#define _ALPHA_CMPXCHG_H
-
-/*
- * Atomic exchange routines.
- */
-
-#define __ASM__MB
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
-
-#define xchg_local(ptr, x)						\
-({									\
-	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
-})
-
-#define cmpxchg_local(ptr, o, n)					\
-({									\
-	__typeof__(*(ptr)) _o_ = (o);					\
-	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
-					  (unsigned long)_n_,		\
-					  sizeof(*(ptr)));		\
-})
-
-#define cmpxchg64_local(ptr, o, n)					\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-})
-
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
-#define xchg(ptr, x)							\
-({									\
-	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
-				 sizeof(*(ptr)));			\
-})
-
-#define cmpxchg(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) _o_ = (o);					\
-	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
-				    (unsigned long)_n_,	sizeof(*(ptr)));\
-})
-
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-})
-
-#undef __ASM__MB
-#undef ____cmpxchg
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-#endif /* _ALPHA_CMPXCHG_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/compiler.h b/ANDROID_3.4.5/arch/alpha/include/asm/compiler.h
deleted file mode 100644
index da6bb199..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/compiler.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef __ALPHA_COMPILER_H
-#define __ALPHA_COMPILER_H
-
-/* 
- * Herein are macros we use when describing various patterns we want to GCC.
- * In all cases we can get better schedules out of the compiler if we hide
- * as little as possible inside inline assembly.  However, we want to be
- * able to know what we'll get out before giving up inline assembly.  Thus
- * these tests and macros.
- */
-
-#if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3
-# define __kernel_insbl(val, shift)	__builtin_alpha_insbl(val, shift)
-# define __kernel_inswl(val, shift)	__builtin_alpha_inswl(val, shift)
-# define __kernel_insql(val, shift)	__builtin_alpha_insql(val, shift)
-# define __kernel_inslh(val, shift)	__builtin_alpha_inslh(val, shift)
-# define __kernel_extbl(val, shift)	__builtin_alpha_extbl(val, shift)
-# define __kernel_extwl(val, shift)	__builtin_alpha_extwl(val, shift)
-# define __kernel_cmpbge(a, b)		__builtin_alpha_cmpbge(a, b)
-#else
-# define __kernel_insbl(val, shift)					\
-  ({ unsigned long __kir;						\
-     __asm__("insbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
-     __kir; })
-# define __kernel_inswl(val, shift)					\
-  ({ unsigned long __kir;						\
-     __asm__("inswl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
-     __kir; })
-# define __kernel_insql(val, shift)					\
-  ({ unsigned long __kir;						\
-     __asm__("insql %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
-     __kir; })
-# define __kernel_inslh(val, shift)					\
-  ({ unsigned long __kir;						\
-     __asm__("inslh %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
-     __kir; })
-# define __kernel_extbl(val, shift)					\
-  ({ unsigned long __kir;						\
-     __asm__("extbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
-     __kir; })
-# define __kernel_extwl(val, shift)					\
-  ({ unsigned long __kir;						\
-     __asm__("extwl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
-     __kir; })
-# define __kernel_cmpbge(a, b)						\
-  ({ unsigned long __kir;						\
-     __asm__("cmpbge %r2,%1,%0" : "=r"(__kir) : "rI"(b), "rJ"(a));	\
-     __kir; })
-#endif
-
-#ifdef __alpha_cix__
-# if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3
-#  define __kernel_cttz(x)		__builtin_ctzl(x)
-#  define __kernel_ctlz(x)		__builtin_clzl(x)
-#  define __kernel_ctpop(x)		__builtin_popcountl(x)
-# else
-#  define __kernel_cttz(x)						\
-   ({ unsigned long __kir;						\
-      __asm__("cttz %1,%0" : "=r"(__kir) : "r"(x));			\
-      __kir; })
-#  define __kernel_ctlz(x)						\
-   ({ unsigned long __kir;						\
-      __asm__("ctlz %1,%0" : "=r"(__kir) : "r"(x));			\
-      __kir; })
-#  define __kernel_ctpop(x)						\
-   ({ unsigned long __kir;						\
-      __asm__("ctpop %1,%0" : "=r"(__kir) : "r"(x));			\
-      __kir; })
-# endif
-#else
-# define __kernel_cttz(x)						\
-  ({ unsigned long __kir;						\
-     __asm__(".arch ev67; cttz %1,%0" : "=r"(__kir) : "r"(x));		\
-     __kir; })
-# define __kernel_ctlz(x)						\
-  ({ unsigned long __kir;						\
-     __asm__(".arch ev67; ctlz %1,%0" : "=r"(__kir) : "r"(x));		\
-     __kir; })
-# define __kernel_ctpop(x)						\
-  ({ unsigned long __kir;						\
-     __asm__(".arch ev67; ctpop %1,%0" : "=r"(__kir) : "r"(x));		\
-     __kir; })
-#endif
-
-
-/* 
- * Beginning with EGCS 1.1, GCC defines __alpha_bwx__ when the BWX 
- * extension is enabled.  Previous versions did not define anything
- * we could test during compilation -- too bad, so sad.
- */
-
-#if defined(__alpha_bwx__)
-#define __kernel_ldbu(mem)	(mem)
-#define __kernel_ldwu(mem)	(mem)
-#define __kernel_stb(val,mem)	((mem) = (val))
-#define __kernel_stw(val,mem)	((mem) = (val))
-#else
-#define __kernel_ldbu(mem)				\
-  ({ unsigned char __kir;				\
-     __asm__(".arch ev56;				\
-	      ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_ldwu(mem)				\
-  ({ unsigned short __kir;				\
-     __asm__(".arch ev56;				\
-	      ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_stb(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stw %1,%0" : "=m"(mem) : "r"(val))
-#endif
-
-#ifdef __KERNEL__
-/* Some idiots over in <linux/compiler.h> thought inline should imply
-   always_inline.  This breaks stuff.  We'll include this file whenever
-   we run into such problems.  */
-
-#include <linux/compiler.h>
-#undef inline
-#undef __inline__
-#undef __inline
-#undef __always_inline
-#define __always_inline		inline __attribute__((always_inline))
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_COMPILER_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/console.h b/ANDROID_3.4.5/arch/alpha/include/asm/console.h
deleted file mode 100644
index a3ce4e62..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/console.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef __AXP_CONSOLE_H
-#define __AXP_CONSOLE_H
-
-/*
- * Console callback routine numbers
- */
-#define CCB_GETC		0x01
-#define CCB_PUTS		0x02
-#define CCB_RESET_TERM		0x03
-#define CCB_SET_TERM_INT	0x04
-#define CCB_SET_TERM_CTL	0x05
-#define CCB_PROCESS_KEYCODE	0x06
-#define CCB_OPEN_CONSOLE	0x07
-#define CCB_CLOSE_CONSOLE	0x08
-
-#define CCB_OPEN		0x10
-#define CCB_CLOSE		0x11
-#define CCB_IOCTL		0x12
-#define CCB_READ		0x13
-#define CCB_WRITE		0x14
-
-#define CCB_SET_ENV		0x20
-#define CCB_RESET_ENV		0x21
-#define CCB_GET_ENV		0x22
-#define CCB_SAVE_ENV		0x23
-
-#define CCB_PSWITCH		0x30
-#define CCB_BIOS_EMUL		0x32
-
-/*
- * Environment variable numbers
- */
-#define ENV_AUTO_ACTION		0x01
-#define ENV_BOOT_DEV		0x02
-#define ENV_BOOTDEF_DEV		0x03
-#define ENV_BOOTED_DEV		0x04
-#define ENV_BOOT_FILE		0x05
-#define ENV_BOOTED_FILE		0x06
-#define ENV_BOOT_OSFLAGS	0x07
-#define ENV_BOOTED_OSFLAGS	0x08
-#define ENV_BOOT_RESET		0x09
-#define ENV_DUMP_DEV		0x0A
-#define ENV_ENABLE_AUDIT	0x0B
-#define ENV_LICENSE		0x0C
-#define ENV_CHAR_SET		0x0D
-#define ENV_LANGUAGE		0x0E
-#define ENV_TTY_DEV		0x0F
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-extern long callback_puts(long unit, const char *s, long length);
-extern long callback_getc(long unit);
-extern long callback_open_console(void);
-extern long callback_close_console(void);
-extern long callback_open(const char *device, long length);
-extern long callback_close(long unit);
-extern long callback_read(long channel, long count, const char *buf, long lbn);
-extern long callback_getenv(long id, const char *buf, unsigned long buf_size);
-extern long callback_setenv(long id, const char *buf, unsigned long buf_size);
-extern long callback_save_env(void);
-
-extern int srm_fixup(unsigned long new_callback_addr,
-		     unsigned long new_hwrpb_addr);
-extern long srm_puts(const char *, long);
-extern long srm_printk(const char *, ...)
-	__attribute__ ((format (printf, 1, 2)));
-
-struct crb_struct;
-struct hwrpb_struct;
-extern int callback_init_done;
-extern void * callback_init(void *);
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif /* __AXP_CONSOLE_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_apecs.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 6785ff7e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,517 +0,0 @@
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
-   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
-   that get passed through the PCI<->ISA bridge chip. So we've gotta use
-   both windows to max out the physical memory we can DMA to. Sigh...
-
-   If we try a window at 0 for 1GB as a work-around, we run into conflicts
-   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
-   BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
-   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
-   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
-   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
-   be used for that range (via virt_to_bus()).
-
-   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
-   to keep virt_to_bus() from returning an address in the first window, for
-   a data area that goes beyond the 64Mb first DMA window.  Sigh...
-   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
-   we can't just use that here, because of header file looping... :-(
-
-   Window 1 will be used for all DMA from the ISA bus; yes, that does
-   limit what memory an ISA floppy or sound card or Ethernet can touch, but
-   it's also a known limitation on other platforms as well. We use the
-   same technique that is used on INTEL platforms with similar limitation:
-   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
-   We trust that any ISA bus device drivers will *always* ask for DMAable
-   memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
-   Note that most PCI bus devices' drivers do *not* explicitly ask for
-   DMAable memory; they count on being able to DMA to any memory they
-   get from kmalloc()/get_free_pages(). They will also use window 1 for
-   any physical memory accesses below 64Mb; the rest will be handled by
-   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
-   We hope that the area before the first window is large enough so that
-   there will be no overlap at the top end (64Mb). We *must* locate the
-   PCI cards' memory just below window 1, so that there's still the
-   possibility of being able to access it via SPARSE space. This is
-   important for cards such as the Matrox Millennium, whose Xserver
-   wants to access memory-mapped registers in byte and short lengths.
-
-   Note that the XL is treated differently from the AVANTI, even though
-   for most other things they are identical. It didn't seem reasonable to
-   make the AVANTI support pay for the limitations of the XL. It is true,
-   however, that an XL kernel will run on an AVANTI without problems.
-
-   %%% All of this should be obviated by the ability to route
-   everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- *  configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD		0xf
-#define APECS_IOC_STAT0_ERR		(1<<4)
-#define APECS_IOC_STAT0_LOST		(1<<5)
-#define APECS_IOC_STAT0_THIT		(1<<6)
-#define APECS_IOC_STAT0_TREF		(1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT	8
-#define APECS_IOC_STAT0_CODE_MASK	0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT	13
-#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_base3;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long coma_cnfg3;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-
-	unsigned long pceb_vid;
-	unsigned long pceb_did;
-	unsigned long pceb_revision;
-	unsigned long pceb_command;
-	unsigned long pceb_status;
-	unsigned long pceb_latency;
-	unsigned long pceb_control;
-	unsigned long pceb_arbcon;
-	unsigned long pceb_arbpri;
-
-	unsigned long esc_id;
-	unsigned long esc_revision;
-	unsigned long esc_int0;
-	unsigned long esc_int1;
-	unsigned long esc_elcr0;
-	unsigned long esc_elcr1;
-	unsigned long esc_last_eisa;
-	unsigned long esc_nmi_stat;
-
-	unsigned long pci_ir;
-	unsigned long pci_imr;
-	unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines.  */
-struct el_apecs_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
-	unsigned long paltemp[32];  /* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long exc_addr;     /* Address of excepting instruction. */
-	unsigned long exc_sum;      /* Summary of arithmetic traps. */
-	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
-	unsigned long iccsr;        /* IBox hardware enables. */
-	unsigned long pal_base;     /* Base address for PALcode. */
-	unsigned long hier;         /* Hardware Interrupt Enable. */
-	unsigned long hirr;         /* Hardware Interrupt Request. */
-	unsigned long csr;          /* D-stream fault info. */
-	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
-	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long abox_ctl;     /* ABox Control Register. */
-	unsigned long biu_stat;     /* BIU Status. */
-	unsigned long biu_addr;     /* BUI Address. */
-	unsigned long biu_ctl;      /* BIU Control. */
-	unsigned long fill_syndrome;/* For correcting ECC errors. */
-	unsigned long fill_addr;    /* Cache block which was being read */
-	unsigned long va;           /* Effective VA of fault or miss. */
-	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define APECS_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-__EXTERN_INLINE unsigned int apecs_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
-					    unsigned long size)
-{
-	return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		apecs
-#define apecs_trivial_io_bw	0
-#define apecs_trivial_io_lq	0
-#define apecs_trivial_rw_bw	2
-#define apecs_trivial_rw_lq	1
-#define apecs_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_cia.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_cia.h
deleted file mode 100644
index 9e0516c0..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_cia.h
+++ /dev/null
@@ -1,500 +0,0 @@
-#ifndef __ALPHA_CIA__H__
-#define __ALPHA_CIA__H__
-
-/* Define to experiment with fitting everything into one 512MB HAE window.  */
-#define CIA_ONE_HAE_WINDOW 1
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * CIA is the internal name for the 21171 chipset which provides
- * memory controller and PCI access for the 21164 chip based systems.
- * Also supported here is the 21172 (CIA-2) and 21174 (PYXIS).
- *
- * The lineage is a bit confused, since the 21174 was reportedly started
- * from the 21171 Pass 1 mask, and so is missing bug fixes that appear
- * in 21171 Pass 2 and 21172, but it also contains additional features.
- *
- * This file is based on:
- *
- * DECchip 21171 Core Logic Chipset
- * Technical Reference Manual
- *
- * EC-QE18B-TE
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
- * CIA ADDRESS BIT DEFINITIONS
- *
- *  3333 3333 3322 2222 2222 1111 1111 11
- *  9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
- *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
- *  1                                             000
- *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
- *  |                                             |\|
- *  |                               Byte Enable --+ |
- *  |                             Transfer Length --+
- *  +-- IO space, not cached
- *
- *   Byte      Transfer
- *   Enable    Length    Transfer  Byte    Address
- *   adr<6:5>  adr<4:3>  Length    Enable  Adder
- *   ---------------------------------------------
- *      00        00      Byte      1110   0x000
- *      01        00      Byte      1101   0x020
- *      10        00      Byte      1011   0x040
- *      11        00      Byte      0111   0x060
- *
- *      00        01      Word      1100   0x008
- *      01        01      Word      1001   0x028 <= Not supported in this code.
- *      10        01      Word      0011   0x048
- *
- *      00        10      Tribyte   1000   0x010
- *      01        10      Tribyte   0001   0x030
- *
- *      10        11      Longword  0000   0x058
- *
- *      Note that byte enables are asserted low.
- *
- */
-
-#define CIA_MEM_R1_MASK 0x1fffffff  /* SPARSE Mem region 1 mask is 29 bits */
-#define CIA_MEM_R2_MASK 0x07ffffff  /* SPARSE Mem region 2 mask is 27 bits */
-#define CIA_MEM_R3_MASK 0x03ffffff  /* SPARSE Mem region 3 mask is 26 bits */
-
-/*
- * 21171-CA Control and Status Registers
- */
-#define CIA_IOC_CIA_REV			(IDENT_ADDR + 0x8740000080UL)
-#  define CIA_REV_MASK			0xff
-#define CIA_IOC_PCI_LAT			(IDENT_ADDR + 0x87400000C0UL)
-#define CIA_IOC_CIA_CTRL		(IDENT_ADDR + 0x8740000100UL)
-#  define CIA_CTRL_PCI_EN		(1 << 0)
-#  define CIA_CTRL_PCI_LOCK_EN		(1 << 1)
-#  define CIA_CTRL_PCI_LOOP_EN		(1 << 2)
-#  define CIA_CTRL_FST_BB_EN		(1 << 3)
-#  define CIA_CTRL_PCI_MST_EN		(1 << 4)
-#  define CIA_CTRL_PCI_MEM_EN		(1 << 5)
-#  define CIA_CTRL_PCI_REQ64_EN		(1 << 6)
-#  define CIA_CTRL_PCI_ACK64_EN		(1 << 7)
-#  define CIA_CTRL_ADDR_PE_EN		(1 << 8)
-#  define CIA_CTRL_PERR_EN		(1 << 9)
-#  define CIA_CTRL_FILL_ERR_EN		(1 << 10)
-#  define CIA_CTRL_MCHK_ERR_EN		(1 << 11)
-#  define CIA_CTRL_ECC_CHK_EN		(1 << 12)
-#  define CIA_CTRL_ASSERT_IDLE_BC	(1 << 13)
-#  define CIA_CTRL_COM_IDLE_BC		(1 << 14)
-#  define CIA_CTRL_CSR_IOA_BYPASS	(1 << 15)
-#  define CIA_CTRL_IO_FLUSHREQ_EN	(1 << 16)
-#  define CIA_CTRL_CPU_FLUSHREQ_EN	(1 << 17)
-#  define CIA_CTRL_ARB_CPU_EN		(1 << 18)
-#  define CIA_CTRL_EN_ARB_LINK		(1 << 19)
-#  define CIA_CTRL_RD_TYPE_SHIFT	20
-#  define CIA_CTRL_RL_TYPE_SHIFT	24
-#  define CIA_CTRL_RM_TYPE_SHIFT	28
-#  define CIA_CTRL_EN_DMA_RD_PERF	(1 << 31)
-#define CIA_IOC_CIA_CNFG		(IDENT_ADDR + 0x8740000140UL)
-#  define CIA_CNFG_IOA_BWEN		(1 << 0)
-#  define CIA_CNFG_PCI_MWEN		(1 << 4)
-#  define CIA_CNFG_PCI_DWEN		(1 << 5)
-#  define CIA_CNFG_PCI_WLEN		(1 << 8)
-#define CIA_IOC_FLASH_CTRL		(IDENT_ADDR + 0x8740000200UL)
-#define CIA_IOC_HAE_MEM			(IDENT_ADDR + 0x8740000400UL)
-#define CIA_IOC_HAE_IO			(IDENT_ADDR + 0x8740000440UL)
-#define CIA_IOC_CFG			(IDENT_ADDR + 0x8740000480UL)
-#define CIA_IOC_CACK_EN			(IDENT_ADDR + 0x8740000600UL)
-#  define CIA_CACK_EN_LOCK_EN		(1 << 0)
-#  define CIA_CACK_EN_MB_EN		(1 << 1)
-#  define CIA_CACK_EN_SET_DIRTY_EN	(1 << 2)
-#  define CIA_CACK_EN_BC_VICTIM_EN	(1 << 3)
-
-
-/*
- * 21171-CA Diagnostic Registers
- */
-#define CIA_IOC_CIA_DIAG		(IDENT_ADDR + 0x8740002000UL)
-#define CIA_IOC_DIAG_CHECK		(IDENT_ADDR + 0x8740003000UL)
-
-/*
- * 21171-CA Performance Monitor registers
- */
-#define CIA_IOC_PERF_MONITOR		(IDENT_ADDR + 0x8740004000UL)
-#define CIA_IOC_PERF_CONTROL		(IDENT_ADDR + 0x8740004040UL)
-
-/*
- * 21171-CA Error registers
- */
-#define CIA_IOC_CPU_ERR0		(IDENT_ADDR + 0x8740008000UL)
-#define CIA_IOC_CPU_ERR1		(IDENT_ADDR + 0x8740008040UL)
-#define CIA_IOC_CIA_ERR			(IDENT_ADDR + 0x8740008200UL)
-#  define CIA_ERR_COR_ERR		(1 << 0)
-#  define CIA_ERR_UN_COR_ERR		(1 << 1)
-#  define CIA_ERR_CPU_PE		(1 << 2)
-#  define CIA_ERR_MEM_NEM		(1 << 3)
-#  define CIA_ERR_PCI_SERR		(1 << 4)
-#  define CIA_ERR_PERR			(1 << 5)
-#  define CIA_ERR_PCI_ADDR_PE		(1 << 6)
-#  define CIA_ERR_RCVD_MAS_ABT		(1 << 7)
-#  define CIA_ERR_RCVD_TAR_ABT		(1 << 8)
-#  define CIA_ERR_PA_PTE_INV		(1 << 9)
-#  define CIA_ERR_FROM_WRT_ERR		(1 << 10)
-#  define CIA_ERR_IOA_TIMEOUT		(1 << 11)
-#  define CIA_ERR_LOST_CORR_ERR		(1 << 16)
-#  define CIA_ERR_LOST_UN_CORR_ERR	(1 << 17)
-#  define CIA_ERR_LOST_CPU_PE		(1 << 18)
-#  define CIA_ERR_LOST_MEM_NEM		(1 << 19)
-#  define CIA_ERR_LOST_PERR		(1 << 21)
-#  define CIA_ERR_LOST_PCI_ADDR_PE	(1 << 22)
-#  define CIA_ERR_LOST_RCVD_MAS_ABT	(1 << 23)
-#  define CIA_ERR_LOST_RCVD_TAR_ABT	(1 << 24)
-#  define CIA_ERR_LOST_PA_PTE_INV	(1 << 25)
-#  define CIA_ERR_LOST_FROM_WRT_ERR	(1 << 26)
-#  define CIA_ERR_LOST_IOA_TIMEOUT	(1 << 27)
-#  define CIA_ERR_VALID			(1 << 31)
-#define CIA_IOC_CIA_STAT		(IDENT_ADDR + 0x8740008240UL)
-#define CIA_IOC_ERR_MASK		(IDENT_ADDR + 0x8740008280UL)
-#define CIA_IOC_CIA_SYN			(IDENT_ADDR + 0x8740008300UL)
-#define CIA_IOC_MEM_ERR0		(IDENT_ADDR + 0x8740008400UL)
-#define CIA_IOC_MEM_ERR1		(IDENT_ADDR + 0x8740008440UL)
-#define CIA_IOC_PCI_ERR0		(IDENT_ADDR + 0x8740008800UL)
-#define CIA_IOC_PCI_ERR1		(IDENT_ADDR + 0x8740008840UL)
-#define CIA_IOC_PCI_ERR3		(IDENT_ADDR + 0x8740008880UL)
-
-/*
- * 21171-CA System configuration registers
- */
-#define CIA_IOC_MCR			(IDENT_ADDR + 0x8750000000UL)
-#define CIA_IOC_MBA0			(IDENT_ADDR + 0x8750000600UL)
-#define CIA_IOC_MBA2			(IDENT_ADDR + 0x8750000680UL)
-#define CIA_IOC_MBA4			(IDENT_ADDR + 0x8750000700UL)
-#define CIA_IOC_MBA6			(IDENT_ADDR + 0x8750000780UL)
-#define CIA_IOC_MBA8			(IDENT_ADDR + 0x8750000800UL)
-#define CIA_IOC_MBAA			(IDENT_ADDR + 0x8750000880UL)
-#define CIA_IOC_MBAC			(IDENT_ADDR + 0x8750000900UL)
-#define CIA_IOC_MBAE			(IDENT_ADDR + 0x8750000980UL)
-#define CIA_IOC_TMG0			(IDENT_ADDR + 0x8750000B00UL)
-#define CIA_IOC_TMG1			(IDENT_ADDR + 0x8750000B40UL)
-#define CIA_IOC_TMG2			(IDENT_ADDR + 0x8750000B80UL)
-
-/*
- * 2117A-CA PCI Address and Scatter-Gather Registers.
- */
-#define CIA_IOC_PCI_TBIA		(IDENT_ADDR + 0x8760000100UL)
-
-#define CIA_IOC_PCI_W0_BASE		(IDENT_ADDR + 0x8760000400UL)
-#define CIA_IOC_PCI_W0_MASK		(IDENT_ADDR + 0x8760000440UL)
-#define CIA_IOC_PCI_T0_BASE		(IDENT_ADDR + 0x8760000480UL)
-
-#define CIA_IOC_PCI_W1_BASE		(IDENT_ADDR + 0x8760000500UL)
-#define CIA_IOC_PCI_W1_MASK		(IDENT_ADDR + 0x8760000540UL)
-#define CIA_IOC_PCI_T1_BASE		(IDENT_ADDR + 0x8760000580UL)
-
-#define CIA_IOC_PCI_W2_BASE		(IDENT_ADDR + 0x8760000600UL)
-#define CIA_IOC_PCI_W2_MASK		(IDENT_ADDR + 0x8760000640UL)
-#define CIA_IOC_PCI_T2_BASE		(IDENT_ADDR + 0x8760000680UL)
-
-#define CIA_IOC_PCI_W3_BASE		(IDENT_ADDR + 0x8760000700UL)
-#define CIA_IOC_PCI_W3_MASK		(IDENT_ADDR + 0x8760000740UL)
-#define CIA_IOC_PCI_T3_BASE		(IDENT_ADDR + 0x8760000780UL)
-
-#define CIA_IOC_PCI_Wn_BASE(N)	(IDENT_ADDR + 0x8760000400UL + (N)*0x100) 
-#define CIA_IOC_PCI_Wn_MASK(N)	(IDENT_ADDR + 0x8760000440UL + (N)*0x100) 
-#define CIA_IOC_PCI_Tn_BASE(N)	(IDENT_ADDR + 0x8760000480UL + (N)*0x100) 
-
-#define CIA_IOC_PCI_W_DAC		(IDENT_ADDR + 0x87600007C0UL)
-
-/*
- * 2117A-CA Address Translation Registers.
- */
-
-/* 8 tag registers, the first 4 of which are lockable.  */
-#define CIA_IOC_TB_TAGn(n) \
-	(IDENT_ADDR + 0x8760000800UL + (n)*0x40)
-
-/* 4 page registers per tag register.  */
-#define CIA_IOC_TBn_PAGEm(n,m) \
-	(IDENT_ADDR + 0x8760001000UL + (n)*0x100 + (m)*0x40)
-
-/*
- * Memory spaces:
- */
-#define CIA_IACK_SC			(IDENT_ADDR + 0x8720000000UL)
-#define CIA_CONF			(IDENT_ADDR + 0x8700000000UL)
-#define CIA_IO				(IDENT_ADDR + 0x8580000000UL)
-#define CIA_SPARSE_MEM			(IDENT_ADDR + 0x8000000000UL)
-#define CIA_SPARSE_MEM_R2		(IDENT_ADDR + 0x8400000000UL)
-#define CIA_SPARSE_MEM_R3		(IDENT_ADDR + 0x8500000000UL)
-#define CIA_DENSE_MEM		        (IDENT_ADDR + 0x8600000000UL)
-#define CIA_BW_MEM			(IDENT_ADDR + 0x8800000000UL)
-#define CIA_BW_IO			(IDENT_ADDR + 0x8900000000UL)
-#define CIA_BW_CFG_0			(IDENT_ADDR + 0x8a00000000UL)
-#define CIA_BW_CFG_1			(IDENT_ADDR + 0x8b00000000UL)
-
-/*
- * ALCOR's GRU ASIC registers
- */
-#define GRU_INT_REQ			(IDENT_ADDR + 0x8780000000UL)
-#define GRU_INT_MASK			(IDENT_ADDR + 0x8780000040UL)
-#define GRU_INT_EDGE			(IDENT_ADDR + 0x8780000080UL)
-#define GRU_INT_HILO			(IDENT_ADDR + 0x87800000C0UL)
-#define GRU_INT_CLEAR			(IDENT_ADDR + 0x8780000100UL)
-
-#define GRU_CACHE_CNFG			(IDENT_ADDR + 0x8780000200UL)
-#define GRU_SCR				(IDENT_ADDR + 0x8780000300UL)
-#define GRU_LED				(IDENT_ADDR + 0x8780000800UL)
-#define GRU_RESET			(IDENT_ADDR + 0x8780000900UL)
-
-#define ALCOR_GRU_INT_REQ_BITS		0x800fffffUL
-#define XLT_GRU_INT_REQ_BITS		0x80003fffUL
-#define GRU_INT_REQ_BITS		(alpha_mv.sys.cia.gru_int_req_bits+0)
-
-/*
- * PYXIS interrupt control registers
- */
-#define PYXIS_INT_REQ			(IDENT_ADDR + 0x87A0000000UL)
-#define PYXIS_INT_MASK			(IDENT_ADDR + 0x87A0000040UL)
-#define PYXIS_INT_HILO			(IDENT_ADDR + 0x87A00000C0UL)
-#define PYXIS_INT_ROUTE			(IDENT_ADDR + 0x87A0000140UL)
-#define PYXIS_GPO			(IDENT_ADDR + 0x87A0000180UL)
-#define PYXIS_INT_CNFG			(IDENT_ADDR + 0x87A00001C0UL)
-#define PYXIS_RT_COUNT			(IDENT_ADDR + 0x87A0000200UL)
-#define PYXIS_INT_TIME			(IDENT_ADDR + 0x87A0000240UL)
-#define PYXIS_IIC_CTRL			(IDENT_ADDR + 0x87A00002C0UL)
-#define PYXIS_RESET			(IDENT_ADDR + 0x8780000900UL)
-
-/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
-#define PYXIS_DAC_OFFSET		(1UL << 40)
-
-/*
- * Data structure for handling CIA machine checks.
- */
-
-/* System-specific info.  */
-struct el_CIA_sysdata_mcheck {
-	unsigned long	cpu_err0;
-	unsigned long	cpu_err1;
-	unsigned long	cia_err;
-	unsigned long	cia_stat;
-	unsigned long	err_mask;
-	unsigned long	cia_syn;
-	unsigned long	mem_err0;
-	unsigned long	mem_err1;
-	unsigned long	pci_err0;
-	unsigned long	pci_err1;
-	unsigned long	pci_err2;
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-/* Do not touch, this should *NOT* be static inline */
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * CIA (the 2117x PCI/memory support chipset for the EV5 (21164)
- * series of processors uses a sparse address mapping scheme to
- * get at PCI memory and I/O.
- */
-
-/*
- * Memory functions.  64-bit and 32-bit accesses are done through
- * dense memory space, everything else through sparse space.
- *
- * For reading and writing 8 and 16 bit quantities we need to
- * go through one of the three sparse address mapping regions
- * and use the HAE_MEM CSR to provide some bits of the address.
- * The following few routines use only sparse address region 1
- * which gives 1Gbyte of accessible space which relates exactly
- * to the amount of PCI memory mapping *into* system address space.
- * See p 6-17 of the specification but it looks something like this:
- *
- * 21164 Address:
- *
- *          3         2         1
- * 9876543210987654321098765432109876543210
- * 1ZZZZ0.PCI.QW.Address............BBLL
- *
- * ZZ = SBZ
- * BB = Byte offset
- * LL = Transfer length
- *
- * PCI Address:
- *
- * 3         2         1
- * 10987654321098765432109876543210
- * HHH....PCI.QW.Address........ 00
- *
- * HHH = 31:29 HAE_MEM CSR
- *
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-__EXTERN_INLINE unsigned int cia_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= CIA_DENSE_MEM)
-		base_and_type = CIA_SPARSE_MEM + 0x00;
-	else
-		base_and_type = CIA_IO + 0x00;
-
-	/* We can use CIA_MEM_R1_MASK for io ports too, since it is large
-	   enough to cover all io ports, and smaller than CIA_IO.  */
-	addr &= CIA_MEM_R1_MASK;
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= CIA_DENSE_MEM)
-		base_and_type = CIA_SPARSE_MEM + 0x00;
-	else
-		base_and_type = CIA_IO + 0x00;
-
-	addr &= CIA_MEM_R1_MASK;
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int cia_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= CIA_DENSE_MEM)
-		base_and_type = CIA_SPARSE_MEM + 0x08;
-	else
-		base_and_type = CIA_IO + 0x08;
-
-	addr &= CIA_MEM_R1_MASK;
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= CIA_DENSE_MEM)
-		base_and_type = CIA_SPARSE_MEM + 0x08;
-	else
-		base_and_type = CIA_IO + 0x08;
-
-	addr &= CIA_MEM_R1_MASK;
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int cia_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < CIA_DENSE_MEM)
-		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < CIA_DENSE_MEM)
-		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + CIA_IO);
-}
-
-__EXTERN_INLINE void __iomem *cia_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + CIA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int cia_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x8000000000UL;
-}
-
-__EXTERN_INLINE int cia_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= CIA_DENSE_MEM;
-}
-
-__EXTERN_INLINE void __iomem *cia_bwx_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + CIA_BW_IO);
-}
-
-__EXTERN_INLINE void __iomem *cia_bwx_ioremap(unsigned long addr,
-					      unsigned long size)
-{
-	return (void __iomem *)(addr + CIA_BW_MEM);
-}
-
-__EXTERN_INLINE int cia_bwx_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x8000000000UL;
-}
-
-__EXTERN_INLINE int cia_bwx_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr < CIA_BW_IO;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		cia
-#define cia_trivial_rw_bw	2
-#define cia_trivial_rw_lq	1
-#define cia_trivial_io_bw	0
-#define cia_trivial_io_lq	0
-#define cia_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		cia_bwx
-#define cia_bwx_trivial_rw_bw	1
-#define cia_bwx_trivial_rw_lq	1
-#define cia_bwx_trivial_io_bw	1
-#define cia_bwx_trivial_io_lq	1
-#define cia_bwx_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#undef __IO_PREFIX
-#ifdef CONFIG_ALPHA_PYXIS
-#define __IO_PREFIX		cia_bwx
-#else
-#define __IO_PREFIX		cia
-#endif
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_CIA__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_irongate.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_irongate.h
deleted file mode 100644
index 24b2db54..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_irongate.h
+++ /dev/null
@@ -1,232 +0,0 @@
-#ifndef __ALPHA_IRONGATE__H__
-#define __ALPHA_IRONGATE__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * IRONGATE is the internal name for the AMD-751 K7 core logic chipset
- * which provides memory controller and PCI access for NAUTILUS-based
- * EV6 (21264) systems.
- *
- * This file is based on:
- *
- * IronGate management library, (c) 1999 Alpha Processor, Inc.
- * Copyright (C) 1999 Alpha Processor, Inc.,
- *	(David Daniel, Stig Telfer, Soohoon Lee)
- */
-
-/*
- * The 21264 supports, and internally recognizes, a 44-bit physical
- * address space that is divided equally between memory address space
- * and I/O address space. Memory address space resides in the lower
- * half of the physical address space (PA[43]=0) and I/O address space
- * resides in the upper half of the physical address space (PA[43]=1).
- */
-
-/*
- * Irongate CSR map.  Some of the CSRs are 8 or 16 bits, but all access
- * through the routines given is 32-bit.
- *
- * The first 0x40 bytes are standard as per the PCI spec.
- */
-
-typedef volatile __u32	igcsr32;
-
-typedef struct {
-	igcsr32 dev_vendor;		/* 0x00 - device ID, vendor ID */
-	igcsr32 stat_cmd;		/* 0x04 - status, command */
-	igcsr32 class;			/* 0x08 - class code, rev ID */
-	igcsr32 latency;		/* 0x0C - header type, PCI latency */
-	igcsr32 bar0;			/* 0x10 - BAR0 - AGP */
-	igcsr32 bar1;			/* 0x14 - BAR1 - GART */
-	igcsr32 bar2;			/* 0x18 - Power Management reg block */
-
-	igcsr32 rsrvd0[6];		/* 0x1C-0x33 reserved */
-
-	igcsr32 capptr;			/* 0x34 - Capabilities pointer */
-
-	igcsr32 rsrvd1[2];		/* 0x38-0x3F reserved */
-
-	igcsr32 bacsr10;		/* 0x40 - base address chip selects */
-	igcsr32 bacsr32;		/* 0x44 - base address chip selects */
-	igcsr32 bacsr54_eccms761;	/* 0x48 - 751: base addr. chip selects
-						  761: ECC, mode/status */
-
-	igcsr32 rsrvd2[1];		/* 0x4C-0x4F reserved */
-
-	igcsr32 drammap;		/* 0x50 - address mapping control */
-	igcsr32 dramtm;			/* 0x54 - timing, driver strength */
-	igcsr32 dramms;			/* 0x58 - DRAM mode/status */
-
-	igcsr32 rsrvd3[1];		/* 0x5C-0x5F reserved */
-
-	igcsr32 biu0;			/* 0x60 - bus interface unit */
-	igcsr32 biusip;			/* 0x64 - Serial initialisation pkt */
-
-	igcsr32 rsrvd4[2];		/* 0x68-0x6F reserved */
-
-	igcsr32 mro;			/* 0x70 - memory request optimiser */
-
-	igcsr32 rsrvd5[3];		/* 0x74-0x7F reserved */
-
-	igcsr32 whami;			/* 0x80 - who am I */
-	igcsr32 pciarb;			/* 0x84 - PCI arbitration control */
-	igcsr32 pcicfg;			/* 0x88 - PCI config status */
-
-	igcsr32 rsrvd6[4];		/* 0x8C-0x9B reserved */
-
-	igcsr32 pci_mem;		/* 0x9C - PCI top of memory,
-						  761 only */
-
-	/* AGP (bus 1) control registers */
-	igcsr32 agpcap;			/* 0xA0 - AGP Capability Identifier */
-	igcsr32 agpstat;		/* 0xA4 - AGP status register */
-	igcsr32 agpcmd;			/* 0xA8 - AGP control register */
-	igcsr32 agpva;			/* 0xAC - AGP Virtual Address Space */
-	igcsr32 agpmode;		/* 0xB0 - AGP/GART mode control */
-} Irongate0;
-
-
-typedef struct {
-
-	igcsr32 dev_vendor;		/* 0x00 - Device and Vendor IDs */
-	igcsr32 stat_cmd;		/* 0x04 - Status and Command regs */
-	igcsr32 class;			/* 0x08 - subclass, baseclass etc */
-	igcsr32 htype;			/* 0x0C - header type (at 0x0E) */
-	igcsr32 rsrvd0[2];		/* 0x10-0x17 reserved */
-	igcsr32 busnos;			/* 0x18 - Primary, secondary bus nos */
-	igcsr32 io_baselim_regs;	/* 0x1C - IO base, IO lim, AGP status */
-	igcsr32	mem_baselim;		/* 0x20 - memory base, memory lim */
-	igcsr32 pfmem_baselim;		/* 0x24 - prefetchable base, lim */
-	igcsr32 rsrvd1[2];		/* 0x28-0x2F reserved */
-	igcsr32 io_baselim;		/* 0x30 - IO base, IO limit */
-	igcsr32 rsrvd2[2];		/* 0x34-0x3B - reserved */
-	igcsr32 interrupt;		/* 0x3C - interrupt, PCI bridge ctrl */
-
-} Irongate1;
-
-extern igcsr32 *IronECC;
-
-/*
- * Memory spaces:
- */
-
-/* Irongate is consistent with a subset of the Tsunami memory map */
-#ifdef USE_48_BIT_KSEG
-#define IRONGATE_BIAS 0x80000000000UL
-#else
-#define IRONGATE_BIAS 0x10000000000UL
-#endif
-
-
-#define IRONGATE_MEM		(IDENT_ADDR | IRONGATE_BIAS | 0x000000000UL)
-#define IRONGATE_IACK_SC	(IDENT_ADDR | IRONGATE_BIAS | 0x1F8000000UL)
-#define IRONGATE_IO		(IDENT_ADDR | IRONGATE_BIAS | 0x1FC000000UL)
-#define IRONGATE_CONF		(IDENT_ADDR | IRONGATE_BIAS | 0x1FE000000UL)
-
-/*
- * PCI Configuration space accesses are formed like so:
- *
- * 0x1FE << 24 |  : 2 2 2 2 1 1 1 1 : 1 1 1 1 1 1 0 0 : 0 0 0 0 0 0 0 0 :
- *                : 3 2 1 0 9 8 7 6 : 5 4 3 2 1 0 9 8 : 7 6 5 4 3 2 1 0 :
- *                  ---bus numer---   -device-- -fun-   ---register----
- */
-
-#define IGCSR(dev,fun,reg)	( IRONGATE_CONF | \
-				((dev)<<11) | \
-				((fun)<<8) | \
-				(reg) )
-
-#define IRONGATE0		((Irongate0 *) IGCSR(0, 0, 0))
-#define IRONGATE1		((Irongate1 *) IGCSR(1, 0, 0))
-
-/*
- * Data structure for handling IRONGATE machine checks:
- * This is the standard OSF logout frame
- */
-
-#define SCB_Q_SYSERR	0x620			/* OSF definitions */
-#define SCB_Q_PROCERR	0x630
-#define SCB_Q_SYSMCHK	0x660
-#define SCB_Q_PROCMCHK	0x670
-
-struct el_IRONGATE_sysdata_mcheck {
-	__u32 FrameSize;                 /* Bytes, including this field */
-	__u32 FrameFlags;                /* <31> = Retry, <30> = Second Error */
-	__u32 CpuOffset;                 /* Offset to CPU-specific into */
-	__u32 SystemOffset;              /* Offset to system-specific info */
-	__u32 MCHK_Code;
-	__u32 MCHK_Frame_Rev;
-	__u64 I_STAT;
-	__u64 DC_STAT;
-	__u64 C_ADDR;
-	__u64 DC1_SYNDROME;
-	__u64 DC0_SYNDROME;
-	__u64 C_STAT;
-	__u64 C_STS;
-	__u64 RESERVED0;
-	__u64 EXC_ADDR;
-	__u64 IER_CM;
-	__u64 ISUM;
-	__u64 MM_STAT;
-	__u64 PAL_BASE;
-	__u64 I_CTL;
-	__u64 PCTX;
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * IRONGATE (AMD-751) PCI/memory support chip for the EV6 (21264) and
- * K7 can only use linear accesses to get at PCI memory and I/O spaces.
- */
-
-/*
- * Memory functions.  All accesses are done through linear space.
- */
-
-__EXTERN_INLINE void __iomem *irongate_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + IRONGATE_IO);
-}
-
-extern void __iomem *irongate_ioremap(unsigned long addr, unsigned long size);
-extern void irongate_iounmap(volatile void __iomem *addr);
-
-__EXTERN_INLINE int irongate_is_ioaddr(unsigned long addr)
-{
-	return addr >= IRONGATE_MEM;
-}
-
-__EXTERN_INLINE int irongate_is_mmio(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr;
-	return addr < IRONGATE_IO || addr >= IRONGATE_CONF;
-}
-
-#undef __IO_PREFIX
-#define __IO_PREFIX			irongate
-#define irongate_trivial_rw_bw		1
-#define irongate_trivial_rw_lq		1
-#define irongate_trivial_io_bw		1
-#define irongate_trivial_io_lq		1
-#define irongate_trivial_iounmap	0
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_IRONGATE__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_lca.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index 8ee6c516..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,361 +0,0 @@
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- *	Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- *	 PCI addresses that are beyond the first 27 bits of address
- *	 space.  Updating the HAE requires an external cycle (and
- *	 a memory barrier), which tends to be slow.  Instead of updating
- *	 it on each sparse memory access, we keep the current HAE value
- *	 cached in variable cache_hae.  Only if the cached HAE differs
- *	 from the desired HAE value do we actually updated HAE register.
- *	 The HAE register is preserved by the interrupt handler entry/exit
- *	 code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE.  The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like.  You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area.  Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD		0xf
-#define LCA_IOC_STAT0_ERR		(1<<4)
-#define LCA_IOC_STAT0_LOST		(1<<5)
-#define LCA_IOC_STAT0_THIT		(1<<6)
-#define LCA_IOC_STAT0_TREF		(1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT	8
-#define LCA_IOC_STAT0_CODE_MASK		0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT	13
-#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define LCA_HAE_ADDRESS		LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
-#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
-#define LCA_PMR_INTO    0x40                    /* Interrupt override */
-#define LCA_PMR_DMAO    0x80                    /* DMA override */
-#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1   0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2   0x2
-#define LCA_PMR_DIV_4   0x3
-#define LCA_PMR_DIV_8   0x4
-#define LCA_PMR_DIV_16  0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks.  Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
-	struct el_common	h;		/* common logout header */
-	unsigned long		esr;		/* error-status register */
-	unsigned long		ear;		/* error-address register */
-	unsigned long		dc_stat;	/* dcache status register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
-	struct el_common	h;		/* common logout header */
-	unsigned long		pt[31];		/* PAL temps */
-	unsigned long		exc_addr;	/* exception address */
-	unsigned long		pad1[3];
-	unsigned long		pal_base;	/* PALcode base address */
-	unsigned long		hier;		/* hw interrupt enable */
-	unsigned long		hirr;		/* hw interrupt request */
-	unsigned long		mm_csr;		/* MMU control & status */
-	unsigned long		dc_stat;	/* data cache status */
-	unsigned long		dc_addr;	/* data cache addr register */
-	unsigned long		abox_ctl;	/* address box control register */
-	unsigned long		esr;		/* error status register */
-	unsigned long		ear;		/* error address register */
-	unsigned long		car;		/* cache control register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-	unsigned long		va;		/* virtual address register */
-};
-
-union el_lca {
-	struct el_common *		c;
-	struct el_lca_mcheck_long *	l;
-	struct el_lca_mcheck_short *	s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define LCA_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-
-__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		lca
-#define lca_trivial_rw_bw	2
-#define lca_trivial_rw_lq	1
-#define lca_trivial_io_bw	0
-#define lca_trivial_io_lq	0
-#define lca_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_marvel.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_marvel.h
deleted file mode 100644
index dad300fa..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_marvel.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * Marvel systems use the IO7 I/O chip provides PCI/PCIX/AGP access
- *
- * This file is based on:
- *
- * Marvel / EV7 System Programmer's Manual
- * Revision 1.00
- * 14 May 2001
- */
-
-#ifndef __ALPHA_MARVEL__H__
-#define __ALPHA_MARVEL__H__
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <asm/compiler.h>
-
-#define MARVEL_MAX_PIDS		 32 /* as long as we rely on 43-bit superpage */
-#define MARVEL_IRQ_VEC_PE_SHIFT	(10)
-#define MARVEL_IRQ_VEC_IRQ_MASK	((1 << MARVEL_IRQ_VEC_PE_SHIFT) - 1)
-#define MARVEL_NR_IRQS		\
-	(16 + (MARVEL_MAX_PIDS * (1 << MARVEL_IRQ_VEC_PE_SHIFT)))
-
-/*
- * EV7 RBOX Registers
- */
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(16)));
-} ev7_csr;
-
-typedef struct {
-	ev7_csr	RBOX_CFG;		/* 0x0000 */
-	ev7_csr	RBOX_NSVC;
-	ev7_csr	RBOX_EWVC;
-	ev7_csr	RBOX_WHAMI;
-	ev7_csr	RBOX_TCTL;		/* 0x0040 */
-	ev7_csr	RBOX_INT;
-	ev7_csr	RBOX_IMASK;
-	ev7_csr	RBOX_IREQ;
-	ev7_csr	RBOX_INTQ;		/* 0x0080 */
-	ev7_csr	RBOX_INTA;
-	ev7_csr	RBOX_IT;
-	ev7_csr	RBOX_SCRATCH1;
-	ev7_csr	RBOX_SCRATCH2;		/* 0x00c0 */
-	ev7_csr	RBOX_L_ERR;
-} ev7_csrs;
-
-/*
- * EV7 CSR addressing macros
- */
-#define EV7_MASK40(addr)        ((addr) & ((1UL << 41) - 1))
-#define EV7_KERN_ADDR(addr)	((void *)(IDENT_ADDR | EV7_MASK40(addr)))
-
-#define EV7_PE_MASK		0x1ffUL /* 9 bits ( 256 + mem/io ) */
-#define EV7_IPE(pe)		((~((long)(pe)) & EV7_PE_MASK) << 35)
-
-#define EV7_CSR_PHYS(pe, off)	(EV7_IPE(pe) | (0x7FFCUL << 20) | (off))
-#define EV7_CSRS_PHYS(pe)	(EV7_CSR_PHYS(pe, 0UL))
-
-#define EV7_CSR_KERN(pe, off)	(EV7_KERN_ADDR(EV7_CSR_PHYS(pe, off)))
-#define EV7_CSRS_KERN(pe)	(EV7_KERN_ADDR(EV7_CSRS_PHYS(pe)))
-
-#define EV7_CSR_OFFSET(name)	((unsigned long)&((ev7_csrs *)NULL)->name.csr)
-
-/*
- * IO7 registers
- */
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(64)));
-} io7_csr;
-
-typedef struct {
-	/* I/O Port Control Registers */
-	io7_csr	POx_CTRL;	       	/* 0x0000 */
-	io7_csr	POx_CACHE_CTL;
-	io7_csr POx_TIMER;
-	io7_csr POx_IO_ADR_EXT;
-	io7_csr	POx_MEM_ADR_EXT;	/* 0x0100 */
-	io7_csr POx_XCAL_CTRL;
-	io7_csr rsvd1[2];	/* ?? spec doesn't show 0x180 */
-	io7_csr POx_DM_SOURCE;		/* 0x0200 */
-	io7_csr POx_DM_DEST;
-	io7_csr POx_DM_SIZE;
-	io7_csr POx_DM_CTRL;
-	io7_csr rsvd2[4];		/* 0x0300 */
-
-	/* AGP Control Registers -- port 3 only */
-	io7_csr AGP_CAP_ID;		/* 0x0400 */
-	io7_csr AGP_STAT;
-	io7_csr	AGP_CMD;
-	io7_csr	rsvd3;
-
-	/* I/O Port Monitor Registers */
-	io7_csr	POx_MONCTL;		/* 0x0500 */
-	io7_csr POx_CTRA;
-	io7_csr POx_CTRB;
-	io7_csr POx_CTR56;
-	io7_csr POx_SCRATCH;		/* 0x0600 */
-	io7_csr POx_XTRA_A;
-	io7_csr POx_XTRA_TS;
-	io7_csr POx_XTRA_Z;
-	io7_csr rsvd4;			/* 0x0700 */
-	io7_csr POx_THRESHA;
-	io7_csr POx_THRESHB;
-	io7_csr rsvd5[33];
-
-	/* System Address Space Window Control Registers */
-
-	io7_csr POx_WBASE[4];		/* 0x1000 */
-	io7_csr POx_WMASK[4];
-	io7_csr POx_TBASE[4];
-	io7_csr POx_SG_TBIA;
-	io7_csr POx_MSI_WBASE;
-	io7_csr rsvd6[50];
-
-	/* I/O Port Error Registers */
-	io7_csr POx_ERR_SUM;
-	io7_csr POx_FIRST_ERR;
-	io7_csr POx_MSK_HEI;
-	io7_csr POx_TLB_ERR;
-	io7_csr POx_SPL_COMPLT;
-	io7_csr POx_TRANS_SUM;
-	io7_csr POx_FRC_PCI_ERR;
-	io7_csr POx_MULT_ERR;
-	io7_csr rsvd7[8];
-
-	/* I/O Port End of Interrupt Registers */
-	io7_csr EOI_DAT;
-	io7_csr rsvd8[7];
-	io7_csr POx_IACK_SPECIAL;
-	io7_csr rsvd9[103];
-} io7_ioport_csrs;
-
-typedef struct {
-	io7_csr IO_ASIC_REV;		/* 0x30.0000 */
-	io7_csr IO_SYS_REV;
-	io7_csr SER_CHAIN3;
-	io7_csr PO7_RST1;
-	io7_csr PO7_RST2;		/* 0x30.0100 */
-	io7_csr POx_RST[4];
-	io7_csr IO7_DWNH;
-	io7_csr IO7_MAF;
-	io7_csr IO7_MAF_TO;
-	io7_csr IO7_ACC_CLUMP;		/* 0x30.0300 */
-	io7_csr IO7_PMASK;
-	io7_csr IO7_IOMASK;
-	io7_csr IO7_UPH;
-	io7_csr IO7_UPH_TO;		/* 0x30.0400 */
-	io7_csr RBX_IREQ_OFF;
-	io7_csr RBX_INTA_OFF;
-	io7_csr INT_RTY;
-	io7_csr PO7_MONCTL;		/* 0x30.0500 */
-	io7_csr PO7_CTRA;
-	io7_csr PO7_CTRB;
-	io7_csr PO7_CTR56;
-	io7_csr PO7_SCRATCH;		/* 0x30.0600 */
-	io7_csr PO7_XTRA_A;
-	io7_csr PO7_XTRA_TS;
-	io7_csr PO7_XTRA_Z;
-	io7_csr PO7_PMASK;		/* 0x30.0700 */
-	io7_csr PO7_THRESHA;
-	io7_csr PO7_THRESHB;
-	io7_csr rsvd1[97];
-	io7_csr PO7_ERROR_SUM;		/* 0x30.2000 */
-	io7_csr PO7_BHOLE_MASK;
-	io7_csr PO7_HEI_MSK;
-	io7_csr PO7_CRD_MSK;
-	io7_csr PO7_UNCRR_SYM;		/* 0x30.2100 */
-	io7_csr PO7_CRRCT_SYM;
-	io7_csr PO7_ERR_PKT[2];
-	io7_csr PO7_UGBGE_SYM;		/* 0x30.2200 */
-	io7_csr rsbv2[887];
-	io7_csr PO7_LSI_CTL[128];	/* 0x31.0000 */
-	io7_csr rsvd3[123];
-	io7_csr HLT_CTL;		/* 0x31.3ec0 */
-	io7_csr HPI_CTL;		/* 0x31.3f00 */
-	io7_csr CRD_CTL;
-	io7_csr STV_CTL;
-	io7_csr HEI_CTL;
-	io7_csr PO7_MSI_CTL[16];	/* 0x31.4000 */
-	io7_csr rsvd4[240];
-
-	/*
-	 * Interrupt Diagnostic / Test
-	 */
-	struct {
-		io7_csr INT_PND;
-		io7_csr INT_CLR;
-		io7_csr INT_EOI;
-		io7_csr rsvd[29];
-	} INT_DIAG[4];
-	io7_csr rsvd5[125];	    	/* 0x31.a000 */
-	io7_csr MISC_PND;		/* 0x31.b800 */
-	io7_csr rsvd6[31];
-	io7_csr MSI_PND[16];		/* 0x31.c000 */
-	io7_csr rsvd7[16];
-	io7_csr MSI_CLR[16];		/* 0x31.c800 */
-} io7_port7_csrs;
-
-/* 
- * IO7 DMA Window Base register (POx_WBASEx)
- */
-#define wbase_m_ena  0x1
-#define wbase_m_sg   0x2
-#define wbase_m_dac  0x4
-#define wbase_m_addr 0xFFF00000
-union IO7_POx_WBASE {
-	struct {
-		unsigned ena : 1;	/* <0>			*/
-		unsigned sg : 1;	/* <1>			*/
-		unsigned dac : 1;	/* <2> -- window 3 only */
-		unsigned rsvd1 : 17; 
-		unsigned addr : 12;	/* <31:20>		*/
-		unsigned rsvd2 : 32;
-	} bits;
-	unsigned as_long[2];
-	unsigned as_quad;
-};
-
-/*
- * IO7 IID (Interrupt IDentifier) format
- *
- * For level-sensative interrupts, int_num is encoded as:
- *
- *	bus/port	slot/device	INTx
- *	<7:5>		<4:2>		<1:0>
- */
-union IO7_IID {
-	struct {
-		unsigned int_num : 9;		/* <8:0>    	*/
-		unsigned tpu_mask : 4;		/* <12:9> rsvd	*/
-		unsigned msi : 1;		/* 13		*/
-		unsigned ipe : 10;		/* <23:14>	*/
-		unsigned long rsvd : 40;		
-	} bits;
-	unsigned int as_long[2];
-	unsigned long as_quad;
-};
-
-/*
- * IO7 addressing macros
- */
-#define IO7_KERN_ADDR(addr)	(EV7_KERN_ADDR(addr))
-
-#define IO7_PORT_MASK	   	0x07UL	/* 3 bits of port 	   */
-
-#define IO7_IPE(pe)		(EV7_IPE(pe))
-#define IO7_IPORT(port)		((~((long)(port)) & IO7_PORT_MASK) << 32)
-
-#define IO7_HOSE(pe, port)	(IO7_IPE(pe) | IO7_IPORT(port))
-
-#define IO7_MEM_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0x00000000UL)
-#define IO7_CONF_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0xFE000000UL)
-#define IO7_IO_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0xFF000000UL)
-#define IO7_CSR_PHYS(pe, port, off) \
-                                (IO7_HOSE(pe, port) | 0xFF800000UL | (off))
-#define IO7_CSRS_PHYS(pe, port)	(IO7_CSR_PHYS(pe, port, 0UL))
-#define IO7_PORT7_CSRS_PHYS(pe) (IO7_CSR_PHYS(pe, 7, 0x300000UL))
-
-#define IO7_MEM_KERN(pe, port)      (IO7_KERN_ADDR(IO7_MEM_PHYS(pe, port)))
-#define IO7_CONF_KERN(pe, port)     (IO7_KERN_ADDR(IO7_CONF_PHYS(pe, port)))
-#define IO7_IO_KERN(pe, port)       (IO7_KERN_ADDR(IO7_IO_PHYS(pe, port)))
-#define IO7_CSR_KERN(pe, port, off) (IO7_KERN_ADDR(IO7_CSR_PHYS(pe,port,off)))
-#define IO7_CSRS_KERN(pe, port)     (IO7_KERN_ADDR(IO7_CSRS_PHYS(pe, port)))
-#define IO7_PORT7_CSRS_KERN(pe)	    (IO7_KERN_ADDR(IO7_PORT7_CSRS_PHYS(pe)))
-
-#define IO7_PLL_RNGA(pll)	(((pll) >> 3) & 0x7)
-#define IO7_PLL_RNGB(pll)	(((pll) >> 6) & 0x7)
-
-#define IO7_MEM_SPACE		(2UL * 1024 * 1024 * 1024)	/* 2GB MEM */
-#define IO7_IO_SPACE		(8UL * 1024 * 1024)		/* 8MB I/O */
-
- 
-/* 
- * Offset between ram physical addresses and pci64 DAC addresses
- */
-#define IO7_DAC_OFFSET		(1UL << 49)
-
-/*
- * This is needed to satisify the IO() macro used in initializing the machvec
- */
-#define MARVEL_IACK_SC 							\
-        ((unsigned long)						\
-	 (&(((io7_ioport_csrs *)IO7_CSRS_KERN(0, 0))->POx_IACK_SPECIAL)))
-
-#ifdef __KERNEL__
-
-/*
- * IO7 structs
- */
-#define IO7_NUM_PORTS 4
-#define IO7_AGP_PORT  3
-
-struct io7_port {
-	struct io7 *io7;
-	struct pci_controller *hose;
-
-	int enabled;
-	unsigned int port;
-	io7_ioport_csrs *csrs;
-
-	unsigned long saved_wbase[4];
-	unsigned long saved_wmask[4];
-	unsigned long saved_tbase[4];
-};
-
-struct io7 {
-	struct io7 *next;
-
-	unsigned int pe;
-	io7_port7_csrs *csrs;
-	struct io7_port ports[IO7_NUM_PORTS];
-
-	spinlock_t irq_lock;
-};
-
-#ifndef __EXTERN_INLINE
-# define __EXTERN_INLINE extern inline
-# define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions. All access through linear space.
- */
-
-/*
- * Memory functions.  All accesses through linear space.
- */
-
-#define vucp	volatile unsigned char __force *
-#define vusp	volatile unsigned short __force *
-
-extern unsigned int marvel_ioread8(void __iomem *);
-extern void marvel_iowrite8(u8 b, void __iomem *);
-
-__EXTERN_INLINE unsigned int marvel_ioread16(void __iomem *addr)
-{
-	return __kernel_ldwu(*(vusp)addr);
-}
-
-__EXTERN_INLINE void marvel_iowrite16(u16 b, void __iomem *addr)
-{
-	__kernel_stw(b, *(vusp)addr);
-}
-
-extern void __iomem *marvel_ioremap(unsigned long addr, unsigned long size);
-extern void marvel_iounmap(volatile void __iomem *addr);
-extern void __iomem *marvel_ioportmap (unsigned long addr);
-
-__EXTERN_INLINE int marvel_is_ioaddr(unsigned long addr)
-{
-	return (addr >> 40) & 1;
-}
-
-extern int marvel_is_mmio(const volatile void __iomem *);
-
-#undef vucp
-#undef vusp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		marvel
-#define marvel_trivial_rw_bw	1
-#define marvel_trivial_rw_lq	1
-#define marvel_trivial_io_bw	0
-#define marvel_trivial_io_lq	1
-#define marvel_trivial_iounmap	0
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-# undef __EXTERN_INLINE
-# undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_MARVEL__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_mcpcia.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_mcpcia.h
deleted file mode 100644
index ad44bef2..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_mcpcia.h
+++ /dev/null
@@ -1,381 +0,0 @@
-#ifndef __ALPHA_MCPCIA__H__
-#define __ALPHA_MCPCIA__H__
-
-/* Define to experiment with fitting everything into one 128MB HAE window.
-   One window per bus, that is.  */
-#define MCPCIA_ONE_HAE_WINDOW 1
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * MCPCIA is the internal name for a core logic chipset which provides
- * PCI access for the RAWHIDE family of systems.
- *
- * This file is based on:
- *
- * RAWHIDE System Programmer's Manual
- * 16-May-96
- * Rev. 1.4
- *
- */
-
-/*------------------------------------------------------------------------**
-**                                                                        **
-**  I/O procedures                                                        **
-**                                                                        **
-**      inport[b|w|t|l], outport[b|w|t|l] 8:16:24:32 IO xfers             **
-**	inportbxt: 8 bits only                                            **
-**      inport:    alias of inportw                                       **
-**      outport:   alias of outportw                                      **
-**                                                                        **
-**      inmem[b|w|t|l], outmem[b|w|t|l] 8:16:24:32 ISA memory xfers       **
-**	inmembxt: 8 bits only                                             **
-**      inmem:    alias of inmemw                                         **
-**      outmem:   alias of outmemw                                        **
-**                                                                        **
-**------------------------------------------------------------------------*/
-
-
-/* MCPCIA ADDRESS BIT DEFINITIONS
- *
- *  3333 3333 3322 2222 2222 1111 1111 11
- *  9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
- *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
- *  1                                             000
- *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
- *  |                                             |\|
- *  |                               Byte Enable --+ |
- *  |                             Transfer Length --+
- *  +-- IO space, not cached
- *
- *   Byte      Transfer
- *   Enable    Length    Transfer  Byte    Address
- *   adr<6:5>  adr<4:3>  Length    Enable  Adder
- *   ---------------------------------------------
- *      00        00      Byte      1110   0x000
- *      01        00      Byte      1101   0x020
- *      10        00      Byte      1011   0x040
- *      11        00      Byte      0111   0x060
- *
- *      00        01      Word      1100   0x008
- *      01        01      Word      1001   0x028 <= Not supported in this code.
- *      10        01      Word      0011   0x048
- *
- *      00        10      Tribyte   1000   0x010
- *      01        10      Tribyte   0001   0x030
- *
- *      10        11      Longword  0000   0x058
- *
- *      Note that byte enables are asserted low.
- *
- */
-
-#define MCPCIA_MAX_HOSES 4
-
-#define MCPCIA_MID(m)		((unsigned long)(m) << 33)
-
-/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively. 
-   Durango adds PCI2 and PCI3 at MID 6 and 7 respectively.  */
-#define MCPCIA_HOSE2MID(h)	((h) + 4)
-
-#define MCPCIA_MEM_MASK 0x07ffffff /* SPARSE Mem region mask is 27 bits */
-
-/*
- * Memory spaces:
- */
-#define MCPCIA_SPARSE(m)	(IDENT_ADDR + 0xf000000000UL + MCPCIA_MID(m))
-#define MCPCIA_DENSE(m)		(IDENT_ADDR + 0xf100000000UL + MCPCIA_MID(m))
-#define MCPCIA_IO(m)		(IDENT_ADDR + 0xf180000000UL + MCPCIA_MID(m))
-#define MCPCIA_CONF(m)		(IDENT_ADDR + 0xf1c0000000UL + MCPCIA_MID(m))
-#define MCPCIA_CSR(m)		(IDENT_ADDR + 0xf1e0000000UL + MCPCIA_MID(m))
-#define MCPCIA_IO_IACK(m)	(IDENT_ADDR + 0xf1f0000000UL + MCPCIA_MID(m))
-#define MCPCIA_DENSE_IO(m)	(IDENT_ADDR + 0xe1fc000000UL + MCPCIA_MID(m))
-#define MCPCIA_DENSE_CONF(m)	(IDENT_ADDR + 0xe1fe000000UL + MCPCIA_MID(m))
-
-/*
- *  General Registers
- */
-#define MCPCIA_REV(m)		(MCPCIA_CSR(m) + 0x000)
-#define MCPCIA_WHOAMI(m)	(MCPCIA_CSR(m) + 0x040)
-#define MCPCIA_PCI_LAT(m)	(MCPCIA_CSR(m) + 0x080)
-#define MCPCIA_CAP_CTRL(m)	(MCPCIA_CSR(m) + 0x100)
-#define MCPCIA_HAE_MEM(m)	(MCPCIA_CSR(m) + 0x400)
-#define MCPCIA_HAE_IO(m)	(MCPCIA_CSR(m) + 0x440)
-#define _MCPCIA_IACK_SC(m)	(MCPCIA_CSR(m) + 0x480)
-#define MCPCIA_HAE_DENSE(m)	(MCPCIA_CSR(m) + 0x4C0)
-
-/*
- * Interrupt Control registers
- */
-#define MCPCIA_INT_CTL(m)	(MCPCIA_CSR(m) + 0x500)
-#define MCPCIA_INT_REQ(m)	(MCPCIA_CSR(m) + 0x540)
-#define MCPCIA_INT_TARG(m)	(MCPCIA_CSR(m) + 0x580)
-#define MCPCIA_INT_ADR(m)	(MCPCIA_CSR(m) + 0x5C0)
-#define MCPCIA_INT_ADR_EXT(m)	(MCPCIA_CSR(m) + 0x600)
-#define MCPCIA_INT_MASK0(m)	(MCPCIA_CSR(m) + 0x640)
-#define MCPCIA_INT_MASK1(m)	(MCPCIA_CSR(m) + 0x680)
-#define MCPCIA_INT_ACK0(m)	(MCPCIA_CSR(m) + 0x10003f00)
-#define MCPCIA_INT_ACK1(m)	(MCPCIA_CSR(m) + 0x10003f40)
-
-/*
- * Performance Monitor registers
- */
-#define MCPCIA_PERF_MON(m)	(MCPCIA_CSR(m) + 0x300)
-#define MCPCIA_PERF_CONT(m)	(MCPCIA_CSR(m) + 0x340)
-
-/*
- * Diagnostic Registers
- */
-#define MCPCIA_CAP_DIAG(m)	(MCPCIA_CSR(m) + 0x700)
-#define MCPCIA_TOP_OF_MEM(m)	(MCPCIA_CSR(m) + 0x7C0)
-
-/*
- * Error registers
- */
-#define MCPCIA_MC_ERR0(m)	(MCPCIA_CSR(m) + 0x800)
-#define MCPCIA_MC_ERR1(m)	(MCPCIA_CSR(m) + 0x840)
-#define MCPCIA_CAP_ERR(m)	(MCPCIA_CSR(m) + 0x880)
-#define MCPCIA_PCI_ERR1(m)	(MCPCIA_CSR(m) + 0x1040)
-#define MCPCIA_MDPA_STAT(m)	(MCPCIA_CSR(m) + 0x4000)
-#define MCPCIA_MDPA_SYN(m)	(MCPCIA_CSR(m) + 0x4040)
-#define MCPCIA_MDPA_DIAG(m)	(MCPCIA_CSR(m) + 0x4080)
-#define MCPCIA_MDPB_STAT(m)	(MCPCIA_CSR(m) + 0x8000)
-#define MCPCIA_MDPB_SYN(m)	(MCPCIA_CSR(m) + 0x8040)
-#define MCPCIA_MDPB_DIAG(m)	(MCPCIA_CSR(m) + 0x8080)
-
-/*
- * PCI Address Translation Registers.
- */
-#define MCPCIA_SG_TBIA(m)	(MCPCIA_CSR(m) + 0x1300)
-#define MCPCIA_HBASE(m)		(MCPCIA_CSR(m) + 0x1340)
-
-#define MCPCIA_W0_BASE(m)	(MCPCIA_CSR(m) + 0x1400)
-#define MCPCIA_W0_MASK(m)	(MCPCIA_CSR(m) + 0x1440)
-#define MCPCIA_T0_BASE(m)	(MCPCIA_CSR(m) + 0x1480)
-
-#define MCPCIA_W1_BASE(m)	(MCPCIA_CSR(m) + 0x1500)
-#define MCPCIA_W1_MASK(m)	(MCPCIA_CSR(m) + 0x1540)
-#define MCPCIA_T1_BASE(m)	(MCPCIA_CSR(m) + 0x1580)
-
-#define MCPCIA_W2_BASE(m)	(MCPCIA_CSR(m) + 0x1600)
-#define MCPCIA_W2_MASK(m)	(MCPCIA_CSR(m) + 0x1640)
-#define MCPCIA_T2_BASE(m)	(MCPCIA_CSR(m) + 0x1680)
-
-#define MCPCIA_W3_BASE(m)	(MCPCIA_CSR(m) + 0x1700)
-#define MCPCIA_W3_MASK(m)	(MCPCIA_CSR(m) + 0x1740)
-#define MCPCIA_T3_BASE(m)	(MCPCIA_CSR(m) + 0x1780)
-
-/* Hack!  Only words for bus 0.  */
-
-#ifndef MCPCIA_ONE_HAE_WINDOW
-#define MCPCIA_HAE_ADDRESS	MCPCIA_HAE_MEM(4)
-#endif
-#define MCPCIA_IACK_SC		_MCPCIA_IACK_SC(4)
-
-/* 
- * The canonical non-remaped I/O and MEM addresses have these values
- * subtracted out.  This is arranged so that folks manipulating ISA
- * devices can use their familiar numbers and have them map to bus 0.
- */
-
-#define MCPCIA_IO_BIAS		MCPCIA_IO(4)
-#define MCPCIA_MEM_BIAS		MCPCIA_DENSE(4)
-
-/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
-#define MCPCIA_DAC_OFFSET	(1UL << 40)
-
-/*
- * Data structure for handling MCPCIA machine checks:
- */
-struct el_MCPCIA_uncorrected_frame_mcheck {
-	struct el_common header;
-	struct el_common_EV5_uncorrectable_mcheck procdata;
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * MCPCIA, the RAWHIDE family PCI/memory support chipset for the EV5 (21164)
- * and EV56 (21164a) processors, can use either a sparse address mapping
- * scheme, or the so-called byte-word PCI address space, to get at PCI memory
- * and I/O.
- *
- * Unfortunately, we can't use BWIO with EV5, so for now, we always use SPARSE.
- */
-
-/*
- * Memory functions.  64-bit and 32-bit accesses are done through
- * dense memory space, everything else through sparse space.
- *
- * For reading and writing 8 and 16 bit quantities we need to
- * go through one of the three sparse address mapping regions
- * and use the HAE_MEM CSR to provide some bits of the address.
- * The following few routines use only sparse address region 1
- * which gives 1Gbyte of accessible space which relates exactly
- * to the amount of PCI memory mapping *into* system address space.
- * See p 6-17 of the specification but it looks something like this:
- *
- * 21164 Address:
- *
- *          3         2         1
- * 9876543210987654321098765432109876543210
- * 1ZZZZ0.PCI.QW.Address............BBLL
- *
- * ZZ = SBZ
- * BB = Byte offset
- * LL = Transfer length
- *
- * PCI Address:
- *
- * 3         2         1
- * 10987654321098765432109876543210
- * HHH....PCI.QW.Address........ 00
- *
- * HHH = 31:29 HAE_MEM CSR
- *
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-
-#ifndef MCPCIA_ONE_HAE_WINDOW
-#define MCPCIA_FROB_MMIO						\
-	if (__mcpcia_is_mmio(hose)) {					\
-		set_hae(hose & 0xffffffff);				\
-		hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4);	\
-	}
-#else
-#define MCPCIA_FROB_MMIO						\
-	if (__mcpcia_is_mmio(hose)) {					\
-		hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4);	\
-	}
-#endif
-
-extern inline int __mcpcia_is_mmio(unsigned long addr)
-{
-	return (addr & 0x80000000UL) == 0;
-}
-
-__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
-	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
-	unsigned long result;
-
-	MCPCIA_FROB_MMIO;
-
-	result = *(vip) ((addr << 5) + hose + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
-	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
-	unsigned long w;
-
-	MCPCIA_FROB_MMIO;
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + hose + 0x00) = w;
-}
-
-__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
-	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
-	unsigned long result;
-
-	MCPCIA_FROB_MMIO;
-
-	result = *(vip) ((addr << 5) + hose + 0x08);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
-	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
-	unsigned long w;
-
-	MCPCIA_FROB_MMIO;
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + hose + 0x08) = w;
-}
-
-__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr;
-
-	if (!__mcpcia_is_mmio(addr))
-		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
-
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr;
-
-	if (!__mcpcia_is_mmio(addr))
-		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
-
-	*(vuip)addr = b;
-}
-
-
-__EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + MCPCIA_IO_BIAS);
-}
-
-__EXTERN_INLINE void __iomem *mcpcia_ioremap(unsigned long addr,
-					     unsigned long size)
-{
-	return (void __iomem *)(addr + MCPCIA_MEM_BIAS);
-}
-
-__EXTERN_INLINE int mcpcia_is_ioaddr(unsigned long addr)
-{
-	return addr >= MCPCIA_SPARSE(0);
-}
-
-__EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	return __mcpcia_is_mmio(addr);
-}
-
-#undef MCPCIA_FROB_MMIO
-
-#undef vip
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		mcpcia
-#define mcpcia_trivial_rw_bw	2
-#define mcpcia_trivial_rw_lq	1
-#define mcpcia_trivial_io_bw	0
-#define mcpcia_trivial_io_lq	0
-#define mcpcia_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_MCPCIA__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_polaris.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_polaris.h
deleted file mode 100644
index 2f966b64..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_polaris.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __ALPHA_POLARIS__H__
-#define __ALPHA_POLARIS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * POLARIS is the internal name for a core logic chipset which provides
- * memory controller and PCI access for the 21164PC chip based systems.
- *
- * This file is based on:
- *
- * Polaris System Controller
- * Device Functional Specification
- * 22-Jan-98
- * Rev. 4.2
- *
- */
-
-/* Polaris memory regions */
-#define POLARIS_SPARSE_MEM_BASE		(IDENT_ADDR + 0xf800000000UL)
-#define POLARIS_DENSE_MEM_BASE		(IDENT_ADDR + 0xf900000000UL)
-#define POLARIS_SPARSE_IO_BASE		(IDENT_ADDR + 0xf980000000UL)
-#define POLARIS_SPARSE_CONFIG_BASE	(IDENT_ADDR + 0xf9c0000000UL)
-#define POLARIS_IACK_BASE		(IDENT_ADDR + 0xf9f8000000UL)
-#define POLARIS_DENSE_IO_BASE		(IDENT_ADDR + 0xf9fc000000UL)
-#define POLARIS_DENSE_CONFIG_BASE	(IDENT_ADDR + 0xf9fe000000UL)
-
-#define POLARIS_IACK_SC			POLARIS_IACK_BASE
-
-/* The Polaris command/status registers live in PCI Config space for
- * bus 0/device 0.  As such, they may be bytes, words, or doublewords.
- */
-#define POLARIS_W_VENID		(POLARIS_DENSE_CONFIG_BASE)
-#define POLARIS_W_DEVID		(POLARIS_DENSE_CONFIG_BASE+2)
-#define POLARIS_W_CMD		(POLARIS_DENSE_CONFIG_BASE+4)
-#define POLARIS_W_STATUS	(POLARIS_DENSE_CONFIG_BASE+6)
-
-/*
- * Data structure for handling POLARIS machine checks:
- */
-struct el_POLARIS_sysdata_mcheck {
-    u_long      psc_status;
-    u_long	psc_pcictl0;
-    u_long	psc_pcictl1;
-    u_long	psc_pcictl2;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * POLARIS, the PCI/memory support chipset for the PCA56 (21164PC)
- * processors, can use either a sparse address  mapping scheme, or the 
- * so-called byte-word PCI address space, to get at PCI memory and I/O.
- *
- * However, we will support only the BWX form.
- */
-
-/*
- * Memory functions.  Polaris allows all accesses (byte/word
- * as well as long/quad) to be done through dense space.
- *
- * We will only support DENSE access via BWX insns.
- */
-
-__EXTERN_INLINE void __iomem *polaris_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + POLARIS_DENSE_IO_BASE);
-}
-
-__EXTERN_INLINE void __iomem *polaris_ioremap(unsigned long addr,
-					      unsigned long size)
-{
-	return (void __iomem *)(addr + POLARIS_DENSE_MEM_BASE);
-}
-
-__EXTERN_INLINE int polaris_is_ioaddr(unsigned long addr)
-{
-	return addr >= POLARIS_SPARSE_MEM_BASE;
-}
-
-__EXTERN_INLINE int polaris_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr < POLARIS_SPARSE_IO_BASE;
-}
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		polaris
-#define polaris_trivial_rw_bw	1
-#define polaris_trivial_rw_lq	1
-#define polaris_trivial_io_bw	1
-#define polaris_trivial_io_lq	1
-#define polaris_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_POLARIS__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_t2.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_t2.h
deleted file mode 100644
index ade9d92e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_t2.h
+++ /dev/null
@@ -1,614 +0,0 @@
-#ifndef __ALPHA_T2__H__
-#define __ALPHA_T2__H__
-
-/* Fit everything into one 128MB HAE window. */
-#define T2_ONE_HAE_WINDOW 1
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/compiler.h>
-
-/*
- * T2 is the internal name for the core logic chipset which provides
- * memory controller and PCI access for the SABLE-based systems.
- *
- * This file is based on:
- *
- * SABLE I/O Specification
- * Revision/Update Information: 1.3
- *
- * jestabro@amt.tay1.dec.com Initial Version.
- *
- */
-
-#define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
-
-/* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
-#define _GAMMA_BIAS		0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
-#define GAMMA_BIAS		_GAMMA_BIAS
-#else
-#define GAMMA_BIAS		0
-#endif
-
-/*
- * Memory spaces:
- */
-#define T2_CONF		        (IDENT_ADDR + GAMMA_BIAS + 0x390000000UL)
-#define T2_IO			(IDENT_ADDR + GAMMA_BIAS + 0x3a0000000UL)
-#define T2_SPARSE_MEM		(IDENT_ADDR + GAMMA_BIAS + 0x200000000UL)
-#define T2_DENSE_MEM	        (IDENT_ADDR + GAMMA_BIAS + 0x3c0000000UL)
-
-#define T2_IOCSR		(IDENT_ADDR + GAMMA_BIAS + 0x38e000000UL)
-#define T2_CERR1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000020UL)
-#define T2_CERR2		(IDENT_ADDR + GAMMA_BIAS + 0x38e000040UL)
-#define T2_CERR3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000060UL)
-#define T2_PERR1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000080UL)
-#define T2_PERR2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0000a0UL)
-#define T2_PSCR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0000c0UL)
-#define T2_HAE_1		(IDENT_ADDR + GAMMA_BIAS + 0x38e0000e0UL)
-#define T2_HAE_2		(IDENT_ADDR + GAMMA_BIAS + 0x38e000100UL)
-#define T2_HBASE		(IDENT_ADDR + GAMMA_BIAS + 0x38e000120UL)
-#define T2_WBASE1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000140UL)
-#define T2_WMASK1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000160UL)
-#define T2_TBASE1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000180UL)
-#define T2_WBASE2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001a0UL)
-#define T2_WMASK2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001c0UL)
-#define T2_TBASE2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001e0UL)
-#define T2_TLBBR		(IDENT_ADDR + GAMMA_BIAS + 0x38e000200UL)
-#define T2_IVR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000220UL)
-#define T2_HAE_3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000240UL)
-#define T2_HAE_4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000260UL)
-
-/* The CSRs below are T3/T4 only */
-#define T2_WBASE3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000280UL)
-#define T2_WMASK3		(IDENT_ADDR + GAMMA_BIAS + 0x38e0002a0UL)
-#define T2_TBASE3		(IDENT_ADDR + GAMMA_BIAS + 0x38e0002c0UL)
-
-#define T2_TDR0			(IDENT_ADDR + GAMMA_BIAS + 0x38e000300UL)
-#define T2_TDR1			(IDENT_ADDR + GAMMA_BIAS + 0x38e000320UL)
-#define T2_TDR2			(IDENT_ADDR + GAMMA_BIAS + 0x38e000340UL)
-#define T2_TDR3			(IDENT_ADDR + GAMMA_BIAS + 0x38e000360UL)
-#define T2_TDR4			(IDENT_ADDR + GAMMA_BIAS + 0x38e000380UL)
-#define T2_TDR5			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003a0UL)
-#define T2_TDR6			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003c0UL)
-#define T2_TDR7			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003e0UL)
-
-#define T2_WBASE4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000400UL)
-#define T2_WMASK4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000420UL)
-#define T2_TBASE4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000440UL)
-
-#define T2_AIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000460UL)
-#define T2_VAR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000480UL)
-#define T2_DIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004a0UL)
-#define T2_ICE			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004c0UL)
-
-#ifndef T2_ONE_HAE_WINDOW
-#define T2_HAE_ADDRESS		T2_HAE_1
-#endif
-
-/*  T2 CSRs are in the non-cachable primary IO space from 3.8000.0000 to
- 3.8fff.ffff
- *
- *  +--------------+ 3 8000 0000
- *  | CPU 0 CSRs   |
- *  +--------------+ 3 8100 0000
- *  | CPU 1 CSRs   |
- *  +--------------+ 3 8200 0000
- *  | CPU 2 CSRs   |
- *  +--------------+ 3 8300 0000
- *  | CPU 3 CSRs   |
- *  +--------------+ 3 8400 0000
- *  | CPU Reserved |
- *  +--------------+ 3 8700 0000
- *  | Mem Reserved |
- *  +--------------+ 3 8800 0000
- *  | Mem 0 CSRs   |
- *  +--------------+ 3 8900 0000
- *  | Mem 1 CSRs   |
- *  +--------------+ 3 8a00 0000
- *  | Mem 2 CSRs   |
- *  +--------------+ 3 8b00 0000
- *  | Mem 3 CSRs   |
- *  +--------------+ 3 8c00 0000
- *  | Mem Reserved |
- *  +--------------+ 3 8e00 0000
- *  | PCI Bridge   |
- *  +--------------+ 3 8f00 0000
- *  | Expansion IO |
- *  +--------------+ 3 9000 0000
- *
- *
- */
-#define T2_CPU0_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x380000000L)
-#define T2_CPU1_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x381000000L)
-#define T2_CPU2_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x382000000L)
-#define T2_CPU3_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x383000000L)
-
-#define T2_CPUn_BASE(n)		(T2_CPU0_BASE + (((n)&3) * 0x001000000L))
-
-#define T2_MEM0_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x388000000L)
-#define T2_MEM1_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x389000000L)
-#define T2_MEM2_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x38a000000L)
-#define T2_MEM3_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x38b000000L)
-
-
-/*
- * Sable CPU Module CSRS
- *
- * These are CSRs for hardware other than the CPU chip on the CPU module.
- * The CPU module has Backup Cache control logic, Cbus control logic, and
- * interrupt control logic on it.  There is a duplicate tag store to speed
- * up maintaining cache coherency.
- */
-
-struct sable_cpu_csr {
-  unsigned long bcc;     long fill_00[3]; /* Backup Cache Control */
-  unsigned long bcce;    long fill_01[3]; /* Backup Cache Correctable Error */
-  unsigned long bccea;   long fill_02[3]; /* B-Cache Corr Err Address Latch */
-  unsigned long bcue;    long fill_03[3]; /* B-Cache Uncorrectable Error */
-  unsigned long bcuea;   long fill_04[3]; /* B-Cache Uncorr Err Addr Latch */
-  unsigned long dter;    long fill_05[3]; /* Duplicate Tag Error */
-  unsigned long cbctl;   long fill_06[3]; /* CBus Control */
-  unsigned long cbe;     long fill_07[3]; /* CBus Error */
-  unsigned long cbeal;   long fill_08[3]; /* CBus Error Addr Latch low */
-  unsigned long cbeah;   long fill_09[3]; /* CBus Error Addr Latch high */
-  unsigned long pmbx;    long fill_10[3]; /* Processor Mailbox */
-  unsigned long ipir;    long fill_11[3]; /* Inter-Processor Int Request */
-  unsigned long sic;     long fill_12[3]; /* System Interrupt Clear */
-  unsigned long adlk;    long fill_13[3]; /* Address Lock (LDxL/STxC) */
-  unsigned long madrl;   long fill_14[3]; /* CBus Miss Address */
-  unsigned long rev;     long fill_15[3]; /* CMIC Revision */
-};
-
-/*
- * Data structure for handling T2 machine checks:
- */
-struct el_t2_frame_header {
-	unsigned int	elcf_fid;	/* Frame ID (from above) */
-	unsigned int	elcf_size;	/* Size of frame in bytes */
-};
-
-struct el_t2_procdata_mcheck {
-	unsigned long	elfmc_paltemp[32];	/* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long	elfmc_exc_addr;	/* Addr of excepting insn. */
-	unsigned long	elfmc_exc_sum;	/* Summary of arith traps. */
-	unsigned long	elfmc_exc_mask;	/* Exception mask (from exc_sum). */
-	unsigned long	elfmc_iccsr;	/* IBox hardware enables. */
-	unsigned long	elfmc_pal_base;	/* Base address for PALcode. */
-	unsigned long	elfmc_hier;	/* Hardware Interrupt Enable. */
-	unsigned long	elfmc_hirr;	/* Hardware Interrupt Request. */
-	unsigned long	elfmc_mm_csr;	/* D-stream fault info. */
-	unsigned long	elfmc_dc_stat;	/* D-cache status (ECC/Parity Err). */
-	unsigned long	elfmc_dc_addr;	/* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long	elfmc_abox_ctl;	/* ABox Control Register. */
-	unsigned long	elfmc_biu_stat;	/* BIU Status. */
-	unsigned long	elfmc_biu_addr;	/* BUI Address. */
-	unsigned long	elfmc_biu_ctl;	/* BIU Control. */
-	unsigned long	elfmc_fill_syndrome; /* For correcting ECC errors. */
-	unsigned long	elfmc_fill_addr;/* Cache block which was being read. */
-	unsigned long	elfmc_va;	/* Effective VA of fault or miss. */
-	unsigned long	elfmc_bc_tag;	/* Backup Cache Tag Probe Results. */
-};
-
-/*
- * Sable processor specific Machine Check Data segment.
- */
-
-struct el_t2_logout_header {
-	unsigned int	elfl_size;	/* size in bytes of logout area. */
-	unsigned int	elfl_sbz1:31;	/* Should be zero. */
-	unsigned int	elfl_retry:1;	/* Retry flag. */
-	unsigned int	elfl_procoffset; /* Processor-specific offset. */
-	unsigned int	elfl_sysoffset;	 /* Offset of system-specific. */
-	unsigned int	elfl_error_type;	/* PAL error type code. */
-	unsigned int	elfl_frame_rev;		/* PAL Frame revision. */
-};
-struct el_t2_sysdata_mcheck {
-	unsigned long    elcmc_bcc;	      /* CSR 0 */
-	unsigned long    elcmc_bcce;	      /* CSR 1 */
-	unsigned long    elcmc_bccea;      /* CSR 2 */
-	unsigned long    elcmc_bcue;	      /* CSR 3 */
-	unsigned long    elcmc_bcuea;      /* CSR 4 */
-	unsigned long    elcmc_dter;	      /* CSR 5 */
-	unsigned long    elcmc_cbctl;      /* CSR 6 */
-	unsigned long    elcmc_cbe;	      /* CSR 7 */
-	unsigned long    elcmc_cbeal;      /* CSR 8 */
-	unsigned long    elcmc_cbeah;      /* CSR 9 */
-	unsigned long    elcmc_pmbx;	      /* CSR 10 */
-	unsigned long    elcmc_ipir;	      /* CSR 11 */
-	unsigned long    elcmc_sic;	      /* CSR 12 */
-	unsigned long    elcmc_adlk;	      /* CSR 13 */
-	unsigned long    elcmc_madrl;      /* CSR 14 */
-	unsigned long    elcmc_crrev4;     /* CSR 15 */
-};
-
-/*
- * Sable memory error frame - sable pfms section 3.42
- */
-struct el_t2_data_memory {
-	struct	el_t2_frame_header elcm_hdr;	/* ID$MEM-FERR = 0x08 */
-	unsigned int  elcm_module;	/* Module id. */
-	unsigned int  elcm_res04;	/* Reserved. */
-	unsigned long elcm_merr;	/* CSR0: Error Reg 1. */
-	unsigned long elcm_mcmd1;	/* CSR1: Command Trap 1. */
-	unsigned long elcm_mcmd2;	/* CSR2: Command Trap 2. */
-	unsigned long elcm_mconf;	/* CSR3: Configuration. */
-	unsigned long elcm_medc1;	/* CSR4: EDC Status 1. */
-	unsigned long elcm_medc2;	/* CSR5: EDC Status 2. */
-	unsigned long elcm_medcc;	/* CSR6: EDC Control. */
-	unsigned long elcm_msctl;	/* CSR7: Stream Buffer Control. */
-	unsigned long elcm_mref;	/* CSR8: Refresh Control. */
-	unsigned long elcm_filter;	/* CSR9: CRD Filter Control. */
-};
-
-
-/*
- * Sable other CPU error frame - sable pfms section 3.43
- */
-struct el_t2_data_other_cpu {
-	short	      elco_cpuid;	/* CPU ID */
-	short	      elco_res02[3];
-	unsigned long elco_bcc;	/* CSR 0 */
-	unsigned long elco_bcce;	/* CSR 1 */
-	unsigned long elco_bccea;	/* CSR 2 */
-	unsigned long elco_bcue;	/* CSR 3 */
-	unsigned long elco_bcuea;	/* CSR 4 */
-	unsigned long elco_dter;	/* CSR 5 */
-	unsigned long elco_cbctl;	/* CSR 6 */
-	unsigned long elco_cbe;	/* CSR 7 */
-	unsigned long elco_cbeal;	/* CSR 8 */
-	unsigned long elco_cbeah;	/* CSR 9 */
-	unsigned long elco_pmbx;	/* CSR 10 */
-	unsigned long elco_ipir;	/* CSR 11 */
-	unsigned long elco_sic;	/* CSR 12 */
-	unsigned long elco_adlk;	/* CSR 13 */
-	unsigned long elco_madrl;	/* CSR 14 */
-	unsigned long elco_crrev4;	/* CSR 15 */
-};
-
-/*
- * Sable other CPU error frame - sable pfms section 3.44
- */
-struct el_t2_data_t2{
-	struct el_t2_frame_header elct_hdr;	/* ID$T2-FRAME */
-	unsigned long elct_iocsr;	/* IO Control and Status Register */
-	unsigned long elct_cerr1;	/* Cbus Error Register 1 */
-	unsigned long elct_cerr2;	/* Cbus Error Register 2 */
-	unsigned long elct_cerr3;	/* Cbus Error Register 3 */
-	unsigned long elct_perr1;	/* PCI Error Register 1 */
-	unsigned long elct_perr2;	/* PCI Error Register 2 */
-	unsigned long elct_hae0_1;	/* High Address Extension Register 1 */
-	unsigned long elct_hae0_2;	/* High Address Extension Register 2 */
-	unsigned long elct_hbase;	/* High Base Register */
-	unsigned long elct_wbase1;	/* Window Base Register 1 */
-	unsigned long elct_wmask1;	/* Window Mask Register 1 */
-	unsigned long elct_tbase1;	/* Translated Base Register 1 */
-	unsigned long elct_wbase2;	/* Window Base Register 2 */
-	unsigned long elct_wmask2;	/* Window Mask Register 2 */
-	unsigned long elct_tbase2;	/* Translated Base Register 2 */
-	unsigned long elct_tdr0;	/* TLB Data Register 0 */
-	unsigned long elct_tdr1;	/* TLB Data Register 1 */
-	unsigned long elct_tdr2;	/* TLB Data Register 2 */
-	unsigned long elct_tdr3;	/* TLB Data Register 3 */
-	unsigned long elct_tdr4;	/* TLB Data Register 4 */
-	unsigned long elct_tdr5;	/* TLB Data Register 5 */
-	unsigned long elct_tdr6;	/* TLB Data Register 6 */
-	unsigned long elct_tdr7;	/* TLB Data Register 7 */
-};
-
-/*
- * Sable error log data structure - sable pfms section 3.40
- */
-struct el_t2_data_corrected {
-	unsigned long elcpb_biu_stat;
-	unsigned long elcpb_biu_addr;
-	unsigned long elcpb_biu_ctl;
-	unsigned long elcpb_fill_syndrome;
-	unsigned long elcpb_fill_addr;
-	unsigned long elcpb_bc_tag;
-};
-
-/*
- * Sable error log data structure
- * Note there are 4 memory slots on sable (see t2.h)
- */
-struct el_t2_frame_mcheck {
-	struct el_t2_frame_header elfmc_header;	/* ID$P-FRAME_MCHECK */
-	struct el_t2_logout_header elfmc_hdr;
-	struct el_t2_procdata_mcheck elfmc_procdata;
-	struct el_t2_sysdata_mcheck elfmc_sysdata;
-	struct el_t2_data_t2 elfmc_t2data;
-	struct el_t2_data_memory elfmc_memdata[4];
-	struct el_t2_frame_header elfmc_footer;	/* empty */
-};
-
-
-/*
- * Sable error log data structures on memory errors
- */
-struct el_t2_frame_corrected {
-	struct el_t2_frame_header elfcc_header;	/* ID$P-BC-COR */
-	struct el_t2_logout_header elfcc_hdr;
-	struct el_t2_data_corrected elfcc_procdata;
-/*	struct el_t2_data_t2 elfcc_t2data;		*/
-/*	struct el_t2_data_memory elfcc_memdata[4];	*/
-	struct el_t2_frame_header elfcc_footer;	/* empty */
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * T2 (the core logic PCI/memory support chipset for the SABLE
- * series of processors uses a sparse address mapping scheme to
- * get at PCI memory and I/O.
- */
-
-#define vip	volatile int *
-#define vuip	volatile unsigned int *
-
-extern inline u8 t2_inb(unsigned long addr)
-{
-	long result = *(vip) ((addr << 5) + T2_IO + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-extern inline void t2_outb(u8 b, unsigned long addr)
-{
-	unsigned long w;
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + T2_IO + 0x00) = w;
-	mb();
-}
-
-extern inline u16 t2_inw(unsigned long addr)
-{
-	long result = *(vip) ((addr << 5) + T2_IO + 0x08);
-	return __kernel_extwl(result, addr & 3);
-}
-
-extern inline void t2_outw(u16 b, unsigned long addr)
-{
-	unsigned long w;
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + T2_IO + 0x08) = w;
-	mb();
-}
-
-extern inline u32 t2_inl(unsigned long addr)
-{
-	return *(vuip) ((addr << 5) + T2_IO + 0x18);
-}
-
-extern inline void t2_outl(u32 b, unsigned long addr)
-{
-	*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
-	mb();
-}
-
-
-/*
- * Memory functions.
- *
- * For reading and writing 8 and 16 bit quantities we need to
- * go through one of the three sparse address mapping regions
- * and use the HAE_MEM CSR to provide some bits of the address.
- * The following few routines use only sparse address region 1
- * which gives 1Gbyte of accessible space which relates exactly
- * to the amount of PCI memory mapping *into* system address space.
- * See p 6-17 of the specification but it looks something like this:
- *
- * 21164 Address:
- *
- *          3         2         1
- * 9876543210987654321098765432109876543210
- * 1ZZZZ0.PCI.QW.Address............BBLL
- *
- * ZZ = SBZ
- * BB = Byte offset
- * LL = Transfer length
- *
- * PCI Address:
- *
- * 3         2         1
- * 10987654321098765432109876543210
- * HHH....PCI.QW.Address........ 00
- *
- * HHH = 31:29 HAE_MEM CSR
- *
- */
-
-#ifdef T2_ONE_HAE_WINDOW
-#define t2_set_hae
-#else
-#define t2_set_hae { \
-	unsigned long msb = addr >> 27; \
-	addr &= T2_MEM_R1_MASK; \
-	set_hae(msb); \
-}
-#endif
-
-/*
- * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
- *       they may be called directly, rather than through the
- *       ioreadNN/iowriteNN routines.
- */
-
-__EXTERN_INLINE u8 t2_readb(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long result;
-
-	t2_set_hae;
-
-	result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long result;
-
-	t2_set_hae;
-
-	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08);
-	return __kernel_extwl(result, addr & 3);
-}
-
-/*
- * On SABLE with T2, we must use SPARSE memory even for 32-bit access,
- * because we cannot access all of DENSE without changing its HAE.
- */
-__EXTERN_INLINE u32 t2_readl(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long result;
-
-	t2_set_hae;
-
-	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18);
-	return result & 0xffffffffUL;
-}
-
-__EXTERN_INLINE u64 t2_readq(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long r0, r1, work;
-
-	t2_set_hae;
-
-	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
-	r0 = *(vuip)(work);
-	r1 = *(vuip)(work + (4 << 5));
-	return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void t2_writeb(u8 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long w;
-
-	t2_set_hae;
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w;
-}
-
-__EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long w;
-
-	t2_set_hae;
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w;
-}
-
-/*
- * On SABLE with T2, we must use SPARSE memory even for 32-bit access,
- * because we cannot access all of DENSE without changing its HAE.
- */
-__EXTERN_INLINE void t2_writel(u32 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-
-	t2_set_hae;
-
-	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b;
-}
-
-__EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long work;
-
-	t2_set_hae;
-
-	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
-	*(vuip)work = b;
-	*(vuip)(work + (4 << 5)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *t2_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + T2_IO);
-}
-
-__EXTERN_INLINE void __iomem *t2_ioremap(unsigned long addr, 
-					 unsigned long size)
-{
-	return (void __iomem *)(addr + T2_DENSE_MEM);
-}
-
-__EXTERN_INLINE int t2_is_ioaddr(unsigned long addr)
-{
-	return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= T2_DENSE_MEM;
-}
-
-/* New-style ioread interface.  The mmio routines are so ugly for T2 that
-   it doesn't make sense to merge the pio and mmio routines.  */
-
-#define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int t2_ioread##NS(void __iomem *xaddr)		\
-{									\
-	if (t2_is_mmio(xaddr))						\
-		return t2_read##OS(xaddr);				\
-	else								\
-		return t2_in##OS((unsigned long)xaddr - T2_IO);		\
-}									\
-__EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
-{									\
-	if (t2_is_mmio(xaddr))						\
-		t2_write##OS(b, xaddr);					\
-	else								\
-		t2_out##OS(b, (unsigned long)xaddr - T2_IO);		\
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-
-#undef IOPORT
-
-#undef vip
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		t2
-#define t2_trivial_rw_bw	0
-#define t2_trivial_rw_lq	0
-#define t2_trivial_io_bw	0
-#define t2_trivial_io_lq	0
-#define t2_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_T2__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_titan.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_titan.h
deleted file mode 100644
index 8cf79d12..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_titan.h
+++ /dev/null
@@ -1,409 +0,0 @@
-#ifndef __ALPHA_TITAN__H__
-#define __ALPHA_TITAN__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * TITAN is the internal names for a core logic chipset which provides
- * memory controller and PCI/AGP access for 21264 based systems.
- *
- * This file is based on:
- *
- * Titan Chipset Engineering Specification
- * Revision 0.12
- * 13 July 1999
- *
- */
-
-/* XXX: Do we need to conditionalize on this?  */
-#ifdef USE_48_BIT_KSEG
-#define TI_BIAS 0x80000000000UL
-#else
-#define TI_BIAS 0x10000000000UL
-#endif
-
-/*
- * CChip, DChip, and PChip registers
- */
-
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(64)));
-} titan_64;
-
-typedef struct {
-	titan_64	csc;
-	titan_64	mtr;
-	titan_64	misc;
-	titan_64	mpd;
-	titan_64	aar0;
-	titan_64	aar1;
-	titan_64	aar2;
-	titan_64	aar3;
-	titan_64	dim0;
-	titan_64	dim1;
-	titan_64	dir0;
-	titan_64	dir1;
-	titan_64	drir;
-	titan_64	prben;
-	titan_64	iic0;
-	titan_64	iic1;
-	titan_64	mpr0;
-	titan_64	mpr1;
-	titan_64	mpr2;
-	titan_64	mpr3;
-	titan_64	rsvd[2];
-	titan_64	ttr;
-	titan_64	tdr;
-	titan_64	dim2;
-	titan_64	dim3;
-	titan_64	dir2;
-	titan_64	dir3;
-	titan_64	iic2;
-	titan_64	iic3;
-	titan_64	pwr;
-	titan_64	reserved[17];
-	titan_64	cmonctla;
-	titan_64	cmonctlb;
-	titan_64	cmoncnt01;
-	titan_64	cmoncnt23;
-	titan_64	cpen;
-} titan_cchip;
-
-typedef struct {
-	titan_64	dsc;
-	titan_64	str;
-	titan_64	drev;
-	titan_64	dsc2;
-} titan_dchip;
-
-typedef struct {
-	titan_64	wsba[4];
-	titan_64	wsm[4];
-	titan_64	tba[4];
-	titan_64	pctl;
-	titan_64	plat;
-	titan_64	reserved0[2];
-	union {
-		struct {
-			titan_64	serror;
-			titan_64	serren;
-			titan_64	serrset;
-			titan_64	reserved0;
-			titan_64	gperror;
-			titan_64	gperren;
-			titan_64	gperrset;
-			titan_64	reserved1;
-			titan_64	gtlbiv;
-			titan_64	gtlbia;
-			titan_64	reserved2[2];
-			titan_64	sctl;
-			titan_64	reserved3[3];
-		} g;
-		struct {
-			titan_64	agperror;
-			titan_64	agperren;
-			titan_64	agperrset;
-			titan_64	agplastwr;
-			titan_64	aperror;
-			titan_64	aperren;
-			titan_64	aperrset;
-			titan_64	reserved0;
-			titan_64	atlbiv;
-			titan_64	atlbia;
-			titan_64	reserved1[6];
-		} a;
-	} port_specific;
-	titan_64	sprst;
-	titan_64	reserved1[31];
-} titan_pachip_port;
-
-typedef struct {
-	titan_pachip_port	g_port;
-	titan_pachip_port	a_port;
-} titan_pachip;
-
-#define TITAN_cchip	((titan_cchip  *)(IDENT_ADDR+TI_BIAS+0x1A0000000UL))
-#define TITAN_dchip    	((titan_dchip  *)(IDENT_ADDR+TI_BIAS+0x1B0000800UL))
-#define TITAN_pachip0 	((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x180000000UL))
-#define TITAN_pachip1 	((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x380000000UL))
-extern unsigned TITAN_agp;
-extern int TITAN_bootcpu;
-
-/*
- * TITAN PA-chip Window Space Base Address register.
- * (WSBA[0-2])
- */
-#define wsba_m_ena 0x1                
-#define wsba_m_sg 0x2
-#define wsba_m_addr 0xFFF00000  
-#define wmask_k_sz1gb 0x3FF00000                   
-union TPAchipWSBA {
-	struct  {
-		unsigned wsba_v_ena : 1;
-		unsigned wsba_v_sg : 1;
-		unsigned wsba_v_rsvd1 : 18;
-		unsigned wsba_v_addr : 12;
-		unsigned wsba_v_rsvd2 : 32;
-        } wsba_r_bits;
-	int wsba_q_whole [2];
-};
-
-/*
- * TITAN PA-chip Control Register
- * This definition covers both the G-Port GPCTL and the A-PORT APCTL.
- * Bits <51:0> are the same in both cases. APCTL<63:52> are only 
- * applicable to AGP.
- */
-#define pctl_m_fbtb 			0x00000001
-#define pctl_m_thdis 			0x00000002
-#define pctl_m_chaindis 		0x00000004
-#define pctl_m_tgtlat 			0x00000018
-#define pctl_m_hole  	  		0x00000020
-#define pctl_m_mwin 	  		0x00000040
-#define pctl_m_arbena 	  		0x00000080
-#define pctl_m_prigrp 	  		0x0000FF00
-#define pctl_m_ppri 	  		0x00010000
-#define pctl_m_pcispd66  		0x00020000
-#define pctl_m_cngstlt	  		0x003C0000
-#define pctl_m_ptpdesten 		0x3FC00000
-#define pctl_m_dpcen			0x40000000
-#define pctl_m_apcen		0x0000000080000000UL
-#define pctl_m_dcrtv		0x0000000300000000UL
-#define pctl_m_en_stepping	0x0000000400000000UL
-#define apctl_m_rsvd1		0x000FFFF800000000UL
-#define apctl_m_agp_rate	0x0030000000000000UL
-#define apctl_m_agp_sba_en	0x0040000000000000UL
-#define apctl_m_agp_en		0x0080000000000000UL
-#define apctl_m_rsvd2		0x0100000000000000UL
-#define apctl_m_agp_present	0x0200000000000000UL
-#define apctl_agp_hp_rd		0x1C00000000000000UL
-#define apctl_agp_lp_rd		0xE000000000000000UL
-#define gpctl_m_rsvd		0xFFFFFFF800000000UL
-union TPAchipPCTL {
-	struct {
-		unsigned pctl_v_fbtb : 1;		/* A/G [0]     */
-		unsigned pctl_v_thdis : 1;		/* A/G [1]     */
-		unsigned pctl_v_chaindis : 1;		/* A/G [2]     */
-		unsigned pctl_v_tgtlat : 2;		/* A/G [4:3]   */
-		unsigned pctl_v_hole : 1;		/* A/G [5]     */
-		unsigned pctl_v_mwin : 1;		/* A/G [6]     */
-		unsigned pctl_v_arbena : 1;		/* A/G [7]     */
-		unsigned pctl_v_prigrp : 8;		/* A/G [15:8]  */
-		unsigned pctl_v_ppri : 1;		/* A/G [16]    */
-		unsigned pctl_v_pcispd66 : 1;		/* A/G [17]    */
-		unsigned pctl_v_cngstlt : 4;		/* A/G [21:18] */
-		unsigned pctl_v_ptpdesten : 8;		/* A/G [29:22] */
-		unsigned pctl_v_dpcen : 1;		/* A/G [30]    */
-		unsigned pctl_v_apcen : 1;		/* A/G [31]    */
-		unsigned pctl_v_dcrtv : 2;		/* A/G [33:32] */
-		unsigned pctl_v_en_stepping :1;		/* A/G [34]    */
-		unsigned apctl_v_rsvd1 : 17;		/* A   [51:35] */
-		unsigned apctl_v_agp_rate : 2;		/* A   [53:52] */
-		unsigned apctl_v_agp_sba_en : 1;	/* A   [54]    */
-		unsigned apctl_v_agp_en : 1;		/* A   [55]    */
-		unsigned apctl_v_rsvd2 : 1;		/* A   [56]    */
-		unsigned apctl_v_agp_present : 1;	/* A   [57]    */
-		unsigned apctl_v_agp_hp_rd : 3;		/* A   [60:58] */
-		unsigned apctl_v_agp_lp_rd : 3;		/* A   [63:61] */
-	} pctl_r_bits;
-	unsigned int pctl_l_whole [2];
-	unsigned long pctl_q_whole;
-};
-
-/*
- * SERROR / SERREN / SERRSET
- */
-union TPAchipSERR {
-	struct {
-		unsigned serr_v_lost_uecc : 1;		/* [0]		*/
-		unsigned serr_v_uecc : 1;		/* [1]  	*/
-		unsigned serr_v_cre : 1;		/* [2]		*/
-		unsigned serr_v_nxio : 1;		/* [3]		*/
-		unsigned serr_v_lost_cre : 1;		/* [4]		*/
-		unsigned serr_v_rsvd0 : 10;		/* [14:5]	*/
-		unsigned serr_v_addr : 32;		/* [46:15]	*/
-		unsigned serr_v_rsvd1 : 5;		/* [51:47]	*/
-		unsigned serr_v_source : 2;		/* [53:52]	*/
-		unsigned serr_v_cmd : 2;		/* [55:54]	*/
-		unsigned serr_v_syn : 8;		/* [63:56]	*/
-	} serr_r_bits;
-	unsigned int serr_l_whole[2];
-	unsigned long serr_q_whole;
-};
-
-/*
- * GPERROR / APERROR / GPERREN / APERREN / GPERRSET / APERRSET
- */
-union TPAchipPERR {
-	struct {
-		unsigned long perr_v_lost : 1;	     	/* [0]		*/
-		unsigned long perr_v_serr : 1;		/* [1]		*/
-		unsigned long perr_v_perr : 1;		/* [2]		*/
-		unsigned long perr_v_dcrto : 1;		/* [3]		*/
-		unsigned long perr_v_sge : 1;		/* [4]		*/
-		unsigned long perr_v_ape : 1;		/* [5]		*/
-		unsigned long perr_v_ta : 1;		/* [6]		*/
-		unsigned long perr_v_dpe : 1;		/* [7]		*/
-		unsigned long perr_v_nds : 1;		/* [8]		*/
-		unsigned long perr_v_iptpr : 1;		/* [9]		*/
-		unsigned long perr_v_iptpw : 1;		/* [10] 	*/
-		unsigned long perr_v_rsvd0 : 3;		/* [13:11]	*/
-		unsigned long perr_v_addr : 33;		/* [46:14]	*/
-		unsigned long perr_v_dac : 1;		/* [47]		*/
-		unsigned long perr_v_mwin : 1;		/* [48]		*/
-		unsigned long perr_v_rsvd1 : 3;		/* [51:49]	*/
-		unsigned long perr_v_cmd : 4;		/* [55:52]	*/
-		unsigned long perr_v_rsvd2 : 8;		/* [63:56]	*/
-	} perr_r_bits;
-	unsigned int perr_l_whole[2];
-	unsigned long perr_q_whole;
-};
-
-/*
- * AGPERROR / AGPERREN / AGPERRSET
- */
-union TPAchipAGPERR {
-	struct {
-		unsigned agperr_v_lost : 1;		/* [0]		*/
-		unsigned agperr_v_lpqfull : 1;		/* [1]		*/
-		unsigned apgerr_v_hpqfull : 1;		/* [2]		*/
-		unsigned agperr_v_rescmd : 1;		/* [3]		*/
-		unsigned agperr_v_ipte : 1;		/* [4]		*/
-		unsigned agperr_v_ptp :	1;      	/* [5]		*/
-		unsigned agperr_v_nowindow : 1;		/* [6]		*/
-		unsigned agperr_v_rsvd0 : 8;		/* [14:7]	*/
-		unsigned agperr_v_addr : 32;		/* [46:15]	*/
-		unsigned agperr_v_rsvd1 : 1;		/* [47]		*/
-		unsigned agperr_v_dac : 1;		/* [48]		*/
-		unsigned agperr_v_mwin : 1;		/* [49]		*/
-		unsigned agperr_v_cmd : 3;		/* [52:50]	*/
-		unsigned agperr_v_length : 6;		/* [58:53]	*/
-		unsigned agperr_v_fence : 1;		/* [59]		*/
-		unsigned agperr_v_rsvd2 : 4;		/* [63:60]	*/
-	} agperr_r_bits;
-	unsigned int agperr_l_whole[2];
-	unsigned long agperr_q_whole;
-};
-/*
- * Memory spaces:
- * Hose numbers are assigned as follows:
- *		0 - pachip 0 / G Port
- *		1 - pachip 1 / G Port
- * 		2 - pachip 0 / A Port
- *      	3 - pachip 1 / A Port
- */
-#define TITAN_HOSE_SHIFT       (33) 
-#define TITAN_HOSE(h)		(((unsigned long)(h)) << TITAN_HOSE_SHIFT)
-#define TITAN_BASE		(IDENT_ADDR + TI_BIAS)
-#define TITAN_MEM(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x000000000UL)
-#define _TITAN_IACK_SC(h)    	(TITAN_BASE+TITAN_HOSE(h)+0x1F8000000UL)
-#define TITAN_IO(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x1FC000000UL)
-#define TITAN_CONF(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x1FE000000UL)
-
-#define TITAN_HOSE_MASK		TITAN_HOSE(3)
-#define TITAN_IACK_SC	     	_TITAN_IACK_SC(0) /* hack! */
-
-/* 
- * The canonical non-remaped I/O and MEM addresses have these values
- * subtracted out.  This is arranged so that folks manipulating ISA
- * devices can use their familiar numbers and have them map to bus 0.
- */
-
-#define TITAN_IO_BIAS		TITAN_IO(0)
-#define TITAN_MEM_BIAS		TITAN_MEM(0)
-
-/* The IO address space is larger than 0xffff */
-#define TITAN_IO_SPACE		(TITAN_CONF(0) - TITAN_IO(0))
-
-/* TIG Space */
-#define TITAN_TIG_SPACE		(TITAN_BASE + 0x100000000UL)
-
-/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
-/* ??? Just a guess.  Ought to confirm it hasn't been moved.  */
-#define TITAN_DAC_OFFSET	(1UL << 40)
-
-/*
- * Data structure for handling TITAN machine checks:
- */
-#define SCB_Q_SYSERR	0x620
-#define SCB_Q_PROCERR	0x630
-#define SCB_Q_SYSMCHK	0x660
-#define SCB_Q_PROCMCHK	0x670
-#define SCB_Q_SYSEVENT	0x680	/* environmental / system management */
-struct el_TITAN_sysdata_mcheck {
-	u64 summary;	/* 0x00 */
-	u64 c_dirx;	/* 0x08 */
-	u64 c_misc;	/* 0x10 */
-	u64 p0_serror;	/* 0x18 */
-	u64 p0_gperror; /* 0x20 */
-	u64 p0_aperror; /* 0x28 */
-	u64 p0_agperror;/* 0x30 */
-	u64 p1_serror;	/* 0x38 */
-	u64 p1_gperror; /* 0x40 */
-	u64 p1_aperror; /* 0x48 */
-	u64 p1_agperror;/* 0x50 */
-};
-
-/*
- * System area for a privateer 680 environmental/system management mcheck 
- */
-struct el_PRIVATEER_envdata_mcheck {
-	u64 summary;	/* 0x00 */
-	u64 c_dirx;	/* 0x08 */
-	u64 smir;	/* 0x10 */
-	u64 cpuir;	/* 0x18 */
-	u64 psir;	/* 0x20 */
-	u64 fault;	/* 0x28 */
-	u64 sys_doors;	/* 0x30 */
-	u64 temp_warn;	/* 0x38 */
-	u64 fan_ctrl;	/* 0x40 */
-	u64 code;	/* 0x48 */
-	u64 reserved;	/* 0x50 */
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * TITAN, a 21??? PCI/memory support chipset for the EV6 (21264)
- * can only use linear accesses to get at PCI/AGP memory and I/O spaces.
- */
-
-/*
- * Memory functions.  all accesses are done through linear space.
- */
-extern void __iomem *titan_ioportmap(unsigned long addr);
-extern void __iomem *titan_ioremap(unsigned long addr, unsigned long size);
-extern void titan_iounmap(volatile void __iomem *addr);
-
-__EXTERN_INLINE int titan_is_ioaddr(unsigned long addr)
-{
-	return addr >= TITAN_BASE;
-}
-
-extern int titan_is_mmio(const volatile void __iomem *addr);
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		titan
-#define titan_trivial_rw_bw	1
-#define titan_trivial_rw_lq	1
-#define titan_trivial_io_bw	1
-#define titan_trivial_io_lq	1
-#define titan_trivial_iounmap	0
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_TITAN__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_tsunami.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_tsunami.h
deleted file mode 100644
index 8e39ecf0..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_tsunami.h
+++ /dev/null
@@ -1,334 +0,0 @@
-#ifndef __ALPHA_TSUNAMI__H__
-#define __ALPHA_TSUNAMI__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * TSUNAMI/TYPHOON are the internal names for the core logic chipset which
- * provides memory controller and PCI access for the 21264 based systems.
- *
- * This file is based on:
- *
- * Tsunami System Programmers Manual
- * Preliminary, Chapters 2-5
- *
- */
-
-/* XXX: Do we need to conditionalize on this?  */
-#ifdef USE_48_BIT_KSEG
-#define TS_BIAS 0x80000000000UL
-#else
-#define TS_BIAS 0x10000000000UL
-#endif
-
-/*
- * CChip, DChip, and PChip registers
- */
-
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(64)));
-} tsunami_64;
-
-typedef struct {
-	tsunami_64	csc;
-	tsunami_64	mtr;
-	tsunami_64	misc;
-	tsunami_64	mpd;
-	tsunami_64	aar0;
-	tsunami_64	aar1;
-	tsunami_64	aar2;
-	tsunami_64	aar3;
-	tsunami_64	dim0;
-	tsunami_64	dim1;
-	tsunami_64	dir0;
-	tsunami_64	dir1;
-	tsunami_64	drir;
-	tsunami_64	prben;
-	tsunami_64	iic;	/* a.k.a. iic0 */
-	tsunami_64	wdr;	/* a.k.a. iic1 */
-	tsunami_64	mpr0;
-	tsunami_64	mpr1;
-	tsunami_64	mpr2;
-	tsunami_64	mpr3;
-	tsunami_64	mctl;
-	tsunami_64	__pad1;
-	tsunami_64	ttr;
-	tsunami_64	tdr;
-	tsunami_64	dim2;
-	tsunami_64	dim3;
-	tsunami_64	dir2;
-	tsunami_64	dir3;
-	tsunami_64	iic2;
-	tsunami_64	iic3;
-} tsunami_cchip;
-
-typedef struct {
-	tsunami_64	dsc;
-	tsunami_64	str;
-	tsunami_64	drev;
-} tsunami_dchip;
-
-typedef struct {
-	tsunami_64	wsba[4];
-	tsunami_64	wsm[4];
-	tsunami_64	tba[4];
-	tsunami_64	pctl;
-	tsunami_64	plat;
-	tsunami_64	reserved;
-	tsunami_64	perror;
-	tsunami_64	perrmask;
-	tsunami_64	perrset;
-	tsunami_64	tlbiv;
-	tsunami_64	tlbia;
-	tsunami_64	pmonctl;
-	tsunami_64	pmoncnt;
-} tsunami_pchip;
-
-#define TSUNAMI_cchip  ((tsunami_cchip *)(IDENT_ADDR+TS_BIAS+0x1A0000000UL))
-#define TSUNAMI_dchip  ((tsunami_dchip *)(IDENT_ADDR+TS_BIAS+0x1B0000800UL))
-#define TSUNAMI_pchip0 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x180000000UL))
-#define TSUNAMI_pchip1 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x380000000UL))
-extern int TSUNAMI_bootcpu;
-
-/*
- * TSUNAMI Pchip Error register.
- */
-
-#define perror_m_lost 0x1
-#define perror_m_serr 0x2
-#define perror_m_perr 0x4
-#define perror_m_dcrto 0x8
-#define perror_m_sge 0x10
-#define perror_m_ape 0x20
-#define perror_m_ta 0x40
-#define perror_m_rdpe 0x80
-#define perror_m_nds 0x100
-#define perror_m_rto 0x200
-#define perror_m_uecc 0x400
-#define perror_m_cre 0x800
-#define perror_m_addrl 0xFFFFFFFF0000UL
-#define perror_m_addrh 0x7000000000000UL
-#define perror_m_cmd 0xF0000000000000UL
-#define perror_m_syn 0xFF00000000000000UL
-union TPchipPERROR {   
-	struct  {
-		unsigned int perror_v_lost : 1;
-		unsigned perror_v_serr : 1;
-		unsigned perror_v_perr : 1;
-		unsigned perror_v_dcrto : 1;
-		unsigned perror_v_sge : 1;
-		unsigned perror_v_ape : 1;
-		unsigned perror_v_ta : 1;
-		unsigned perror_v_rdpe : 1;
-		unsigned perror_v_nds : 1;
-		unsigned perror_v_rto : 1;
-		unsigned perror_v_uecc : 1;
-		unsigned perror_v_cre : 1;                 
-		unsigned perror_v_rsvd1 : 4;
-		unsigned perror_v_addrl : 32;
-		unsigned perror_v_addrh : 3;
-		unsigned perror_v_rsvd2 : 1;
-		unsigned perror_v_cmd : 4;
-		unsigned perror_v_syn : 8;
-	} perror_r_bits;
-	int perror_q_whole [2];
-};                       
-
-/*
- * TSUNAMI Pchip Window Space Base Address register.
- */
-#define wsba_m_ena 0x1                
-#define wsba_m_sg 0x2
-#define wsba_m_ptp 0x4
-#define wsba_m_addr 0xFFF00000  
-#define wmask_k_sz1gb 0x3FF00000                   
-union TPchipWSBA {
-	struct  {
-		unsigned wsba_v_ena : 1;
-		unsigned wsba_v_sg : 1;
-		unsigned wsba_v_ptp : 1;
-		unsigned wsba_v_rsvd1 : 17;
-		unsigned wsba_v_addr : 12;
-		unsigned wsba_v_rsvd2 : 32;
-	} wsba_r_bits;
-	int wsba_q_whole [2];
-};
-
-/*
- * TSUNAMI Pchip Control Register
- */
-#define pctl_m_fdsc 0x1
-#define pctl_m_fbtb 0x2
-#define pctl_m_thdis 0x4
-#define pctl_m_chaindis 0x8
-#define pctl_m_tgtlat 0x10
-#define pctl_m_hole 0x20
-#define pctl_m_mwin 0x40
-#define pctl_m_arbena 0x80
-#define pctl_m_prigrp 0x7F00
-#define pctl_m_ppri 0x8000
-#define pctl_m_rsvd1 0x30000
-#define pctl_m_eccen 0x40000
-#define pctl_m_padm 0x80000
-#define pctl_m_cdqmax 0xF00000
-#define pctl_m_rev 0xFF000000
-#define pctl_m_crqmax 0xF00000000UL
-#define pctl_m_ptpmax 0xF000000000UL
-#define pctl_m_pclkx 0x30000000000UL
-#define pctl_m_fdsdis 0x40000000000UL
-#define pctl_m_fdwdis 0x80000000000UL
-#define pctl_m_ptevrfy 0x100000000000UL
-#define pctl_m_rpp 0x200000000000UL
-#define pctl_m_pid 0xC00000000000UL
-#define pctl_m_rsvd2 0xFFFF000000000000UL
-
-union TPchipPCTL {
-	struct {
-		unsigned pctl_v_fdsc : 1;
-		unsigned pctl_v_fbtb : 1;
-		unsigned pctl_v_thdis : 1;
-		unsigned pctl_v_chaindis : 1;
-		unsigned pctl_v_tgtlat : 1;
-		unsigned pctl_v_hole : 1;
-		unsigned pctl_v_mwin : 1;
-		unsigned pctl_v_arbena : 1;
-		unsigned pctl_v_prigrp : 7;
-		unsigned pctl_v_ppri : 1;
-		unsigned pctl_v_rsvd1 : 2;
-		unsigned pctl_v_eccen : 1;
-		unsigned pctl_v_padm : 1;
-		unsigned pctl_v_cdqmax : 4;
-		unsigned pctl_v_rev : 8;
-		unsigned pctl_v_crqmax : 4;
-		unsigned pctl_v_ptpmax : 4;
-		unsigned pctl_v_pclkx : 2;
-		unsigned pctl_v_fdsdis : 1;
-		unsigned pctl_v_fdwdis : 1;
-		unsigned pctl_v_ptevrfy : 1;
-		unsigned pctl_v_rpp : 1;
-		unsigned pctl_v_pid : 2;
-		unsigned pctl_v_rsvd2 : 16;
-	} pctl_r_bits;
-	int pctl_q_whole [2];
-};
-
-/*
- * TSUNAMI Pchip Error Mask Register.
- */
-#define perrmask_m_lost 0x1
-#define perrmask_m_serr 0x2
-#define perrmask_m_perr 0x4
-#define perrmask_m_dcrto 0x8
-#define perrmask_m_sge 0x10
-#define perrmask_m_ape 0x20
-#define perrmask_m_ta 0x40
-#define perrmask_m_rdpe 0x80
-#define perrmask_m_nds 0x100
-#define perrmask_m_rto 0x200
-#define perrmask_m_uecc 0x400
-#define perrmask_m_cre 0x800
-#define perrmask_m_rsvd 0xFFFFFFFFFFFFF000UL
-union TPchipPERRMASK {   
-	struct  {
-		unsigned int perrmask_v_lost : 1;
-		unsigned perrmask_v_serr : 1;
-		unsigned perrmask_v_perr : 1;
-		unsigned perrmask_v_dcrto : 1;
-		unsigned perrmask_v_sge : 1;
-		unsigned perrmask_v_ape : 1;
-		unsigned perrmask_v_ta : 1;
-		unsigned perrmask_v_rdpe : 1;
-		unsigned perrmask_v_nds : 1;
-		unsigned perrmask_v_rto : 1;
-		unsigned perrmask_v_uecc : 1;
-		unsigned perrmask_v_cre : 1;                 
-		unsigned perrmask_v_rsvd1 : 20;
-		unsigned perrmask_v_rsvd2 : 32;
-	} perrmask_r_bits;
-	int perrmask_q_whole [2];
-};                       
-
-/*
- * Memory spaces:
- */
-#define TSUNAMI_HOSE(h)		(((unsigned long)(h)) << 33)
-#define TSUNAMI_BASE		(IDENT_ADDR + TS_BIAS)
-
-#define TSUNAMI_MEM(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x000000000UL)
-#define _TSUNAMI_IACK_SC(h)	(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1F8000000UL)
-#define TSUNAMI_IO(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FC000000UL)
-#define TSUNAMI_CONF(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FE000000UL)
-
-#define TSUNAMI_IACK_SC		_TSUNAMI_IACK_SC(0) /* hack! */
-
-
-/* 
- * The canonical non-remaped I/O and MEM addresses have these values
- * subtracted out.  This is arranged so that folks manipulating ISA
- * devices can use their familiar numbers and have them map to bus 0.
- */
-
-#define TSUNAMI_IO_BIAS          TSUNAMI_IO(0)
-#define TSUNAMI_MEM_BIAS         TSUNAMI_MEM(0)
-
-/* The IO address space is larger than 0xffff */
-#define TSUNAMI_IO_SPACE	(TSUNAMI_CONF(0) - TSUNAMI_IO(0))
-
-/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
-#define TSUNAMI_DAC_OFFSET	(1UL << 40)
-
-/*
- * Data structure for handling TSUNAMI machine checks:
- */
-struct el_TSUNAMI_sysdata_mcheck {
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * TSUNAMI, the 21??? PCI/memory support chipset for the EV6 (21264)
- * can only use linear accesses to get at PCI memory and I/O spaces.
- */
-
-/*
- * Memory functions.  all accesses are done through linear space.
- */
-extern void __iomem *tsunami_ioportmap(unsigned long addr);
-extern void __iomem *tsunami_ioremap(unsigned long addr, unsigned long size);
-__EXTERN_INLINE int tsunami_is_ioaddr(unsigned long addr)
-{
-	return addr >= TSUNAMI_BASE;
-}
-
-__EXTERN_INLINE int tsunami_is_mmio(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	return (addr & 0x100000000UL) == 0;
-}
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		tsunami
-#define tsunami_trivial_rw_bw	1
-#define tsunami_trivial_rw_lq	1
-#define tsunami_trivial_io_bw	1
-#define tsunami_trivial_io_lq	1
-#define tsunami_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_TSUNAMI__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/core_wildfire.h b/ANDROID_3.4.5/arch/alpha/include/asm/core_wildfire.h
deleted file mode 100644
index cd562f54..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/core_wildfire.h
+++ /dev/null
@@ -1,318 +0,0 @@
-#ifndef __ALPHA_WILDFIRE__H__
-#define __ALPHA_WILDFIRE__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-#define WILDFIRE_MAX_QBB	8	/* more than 8 requires other mods */
-#define WILDFIRE_PCA_PER_QBB	4
-#define WILDFIRE_IRQ_PER_PCA	64
-
-#define WILDFIRE_NR_IRQS \
-  (WILDFIRE_MAX_QBB * WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
-
-extern unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB];
-extern unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB];
-#define QBB_MAP_EMPTY	0xff
-
-extern unsigned long wildfire_hard_qbb_mask;
-extern unsigned long wildfire_soft_qbb_mask;
-extern unsigned long wildfire_gp_mask;
-extern unsigned long wildfire_hs_mask;
-extern unsigned long wildfire_iop_mask;
-extern unsigned long wildfire_ior_mask;
-extern unsigned long wildfire_pca_mask;
-extern unsigned long wildfire_cpu_mask;
-extern unsigned long wildfire_mem_mask;
-
-#define WILDFIRE_QBB_EXISTS(qbbno) (wildfire_soft_qbb_mask & (1 << (qbbno)))
-
-#define WILDFIRE_MEM_EXISTS(qbbno) (wildfire_mem_mask & (0xf << ((qbbno) << 2)))
-
-#define WILDFIRE_PCA_EXISTS(qbbno, pcano) \
-		(wildfire_pca_mask & (1 << (((qbbno) << 2) + (pcano))))
-
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(64)));
-} wildfire_64;
-
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(256)));
-} wildfire_256;
-
-typedef struct {
-	volatile unsigned long csr __attribute__((aligned(2048)));
-} wildfire_2k;
-
-typedef struct {
-	wildfire_64	qsd_whami;
-	wildfire_64	qsd_rev;
-	wildfire_64	qsd_port_present;
-	wildfire_64	qsd_port_active;
-	wildfire_64	qsd_fault_ena;
-	wildfire_64	qsd_cpu_int_ena;
-	wildfire_64	qsd_mem_config;
-	wildfire_64	qsd_err_sum;
-	wildfire_64	ce_sum[4];
-	wildfire_64	dev_init[4];
-	wildfire_64	it_int[4];
-	wildfire_64	ip_int[4];
-	wildfire_64	uce_sum[4];
-	wildfire_64	se_sum__non_dev_int[4];
-	wildfire_64	scratch[4];
-	wildfire_64	qsd_timer;
-	wildfire_64	qsd_diag;
-} wildfire_qsd;
-
-typedef struct {
-	wildfire_256	qsd_whami;
-	wildfire_256	__pad1;
-	wildfire_256	ce_sum;
-	wildfire_256	dev_init;
-	wildfire_256	it_int;
-	wildfire_256	ip_int;
-	wildfire_256	uce_sum;
-	wildfire_256	se_sum;
-} wildfire_fast_qsd;
-
-typedef struct {
-	wildfire_2k	qsa_qbb_id;
-	wildfire_2k	__pad1;
-	wildfire_2k	qsa_port_ena;
-	wildfire_2k	qsa_scratch;
-	wildfire_2k	qsa_config[5];
-	wildfire_2k	qsa_ref_int;
-	wildfire_2k	qsa_qbb_pop[2];
-	wildfire_2k	qsa_dtag_fc;
-	wildfire_2k	__pad2[3];
-	wildfire_2k	qsa_diag;
-	wildfire_2k	qsa_diag_lock[4];
-	wildfire_2k	__pad3[11];
-	wildfire_2k	qsa_cpu_err_sum;
-	wildfire_2k	qsa_misc_err_sum;
-	wildfire_2k	qsa_tmo_err_sum;
-	wildfire_2k	qsa_err_ena;
-	wildfire_2k	qsa_tmo_config;
-	wildfire_2k	qsa_ill_cmd_err_sum;
-	wildfire_2k	__pad4[26];
-	wildfire_2k	qsa_busy_mask;
-	wildfire_2k	qsa_arr_valid;
-	wildfire_2k	__pad5[2];
-	wildfire_2k	qsa_port_map[4];
-	wildfire_2k	qsa_arr_addr[8];
-	wildfire_2k	qsa_arr_mask[8];
-} wildfire_qsa;
-
-typedef struct {
-	wildfire_64	ioa_config;
-	wildfire_64	iod_config;
-	wildfire_64	iop_switch_credits;
-	wildfire_64	__pad1;
-	wildfire_64	iop_hose_credits;
-	wildfire_64	__pad2[11];
-	struct {
-		wildfire_64	__pad3;
-		wildfire_64	init;
-	} iop_hose[4];
-	wildfire_64	ioa_hose_0_ctrl;
-	wildfire_64	iod_hose_0_ctrl;
-	wildfire_64	ioa_hose_1_ctrl;
-	wildfire_64	iod_hose_1_ctrl;
-	wildfire_64	ioa_hose_2_ctrl;
-	wildfire_64	iod_hose_2_ctrl;
-	wildfire_64	ioa_hose_3_ctrl;
-	wildfire_64	iod_hose_3_ctrl;
-	struct {
-		wildfire_64	target;
-		wildfire_64	__pad4;
-	} iop_dev_int[4];
-
-	wildfire_64	iop_err_int_target;
-	wildfire_64	__pad5[7];
-	wildfire_64	iop_qbb_err_sum;
-	wildfire_64	__pad6;
-	wildfire_64	iop_qbb_se_sum;
-	wildfire_64	__pad7;
-	wildfire_64	ioa_err_sum;
-	wildfire_64	iod_err_sum;
-	wildfire_64	__pad8[4];
-	wildfire_64	ioa_diag_force_err;
-	wildfire_64	iod_diag_force_err;
-	wildfire_64	__pad9[4];
-	wildfire_64	iop_diag_send_err_int;
-	wildfire_64	__pad10[15];
-	wildfire_64	ioa_scratch;
-	wildfire_64	iod_scratch;
-} wildfire_iop;
-
-typedef struct {
-	wildfire_2k	gpa_qbb_map[4];
-	wildfire_2k	gpa_mem_pop_map;
-	wildfire_2k	gpa_scratch;
-	wildfire_2k	gpa_diag;
-	wildfire_2k	gpa_config_0;
-	wildfire_2k	__pad1;
-	wildfire_2k	gpa_init_id;
-	wildfire_2k	gpa_config_2;
-	/* not complete */
-} wildfire_gp;
-
-typedef struct {
-	wildfire_64	pca_what_am_i;
-	wildfire_64	pca_err_sum;
-	wildfire_64	pca_diag_force_err;
-	wildfire_64	pca_diag_send_err_int;
-	wildfire_64	pca_hose_credits;
-	wildfire_64	pca_scratch;
-	wildfire_64	pca_micro_addr;
-	wildfire_64	pca_micro_data;
-	wildfire_64	pca_pend_int;
-	wildfire_64	pca_sent_int;
-	wildfire_64	__pad1;
-	wildfire_64	pca_stdio_edge_level;
-	wildfire_64	__pad2[52];
-	struct {
-		wildfire_64	target;
-		wildfire_64	enable;
-	} pca_int[4];
-	wildfire_64	__pad3[56];
-	wildfire_64	pca_alt_sent_int[32];
-} wildfire_pca;
-
-typedef struct {
-	wildfire_64	ne_what_am_i;
-	/* not complete */
-} wildfire_ne;
-
-typedef struct {
-	wildfire_64	fe_what_am_i;
-	/* not complete */
-} wildfire_fe;
-
-typedef struct {
-	wildfire_64	pci_io_addr_ext;
-	wildfire_64	pci_ctrl;
-	wildfire_64	pci_err_sum;
-	wildfire_64	pci_err_addr;
-	wildfire_64	pci_stall_cnt;
-	wildfire_64	pci_iack_special;
-	wildfire_64	__pad1[2];
-	wildfire_64	pci_pend_int;
-	wildfire_64	pci_sent_int;
-	wildfire_64	__pad2[54];
-	struct {
-		wildfire_64	wbase;
-		wildfire_64	wmask;
-		wildfire_64	tbase;
-	} pci_window[4];
-	wildfire_64	pci_flush_tlb;
-	wildfire_64	pci_perf_mon;
-} wildfire_pci;
-
-#define WILDFIRE_ENTITY_SHIFT		18
-
-#define WILDFIRE_GP_ENTITY		(0x10UL << WILDFIRE_ENTITY_SHIFT)
-#define WILDFIRE_IOP_ENTITY		(0x08UL << WILDFIRE_ENTITY_SHIFT)
-#define WILDFIRE_QSA_ENTITY		(0x04UL << WILDFIRE_ENTITY_SHIFT)
-#define WILDFIRE_QSD_ENTITY_SLOW	(0x05UL << WILDFIRE_ENTITY_SHIFT)
-#define WILDFIRE_QSD_ENTITY_FAST	(0x01UL << WILDFIRE_ENTITY_SHIFT)
-
-#define WILDFIRE_PCA_ENTITY(pca)	((0xc|(pca))<<WILDFIRE_ENTITY_SHIFT)
-
-#define WILDFIRE_BASE		(IDENT_ADDR | (1UL << 40))
-
-#define WILDFIRE_QBB_MASK	0x0fUL	/* for now, only 4 bits/16 QBBs */
-
-#define WILDFIRE_QBB(q)		((~((long)(q)) & WILDFIRE_QBB_MASK) << 36)
-#define WILDFIRE_HOSE(h)	((long)(h) << 33)
-
-#define WILDFIRE_QBB_IO(q)	(WILDFIRE_BASE | WILDFIRE_QBB(q))
-#define WILDFIRE_QBB_HOSE(q,h)	(WILDFIRE_QBB_IO(q) | WILDFIRE_HOSE(h))
-
-#define WILDFIRE_MEM(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x000000000UL)
-#define WILDFIRE_CONF(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x1FE000000UL)
-#define WILDFIRE_IO(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x1FF000000UL)
-
-#define WILDFIRE_qsd(q) \
- ((wildfire_qsd *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSD_ENTITY_SLOW|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_fast_qsd() \
- ((wildfire_fast_qsd *)(WILDFIRE_QBB_IO(0)|WILDFIRE_QSD_ENTITY_FAST|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_qsa(q) \
- ((wildfire_qsa *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSA_ENTITY|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_iop(q) \
- ((wildfire_iop *)(WILDFIRE_QBB_IO(q)|WILDFIRE_IOP_ENTITY|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_gp(q) \
- ((wildfire_gp *)(WILDFIRE_QBB_IO(q)|WILDFIRE_GP_ENTITY|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_pca(q,pca) \
- ((wildfire_pca *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_ne(q,pca) \
- ((wildfire_ne *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(1UL<<16)))
-
-#define WILDFIRE_fe(q,pca) \
- ((wildfire_fe *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(3UL<<15)))
-
-#define WILDFIRE_pci(q,h) \
- ((wildfire_pci *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(((h)&6)>>1)|((((h)&1)|2)<<16)|(((1UL<<13)-1)<<23)))
-
-#define WILDFIRE_IO_BIAS        WILDFIRE_IO(0,0)
-#define WILDFIRE_MEM_BIAS       WILDFIRE_MEM(0,0) /* ??? */
-
-/* The IO address space is larger than 0xffff */
-#define WILDFIRE_IO_SPACE	(8UL*1024*1024)
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Memory functions.  all accesses are done through linear space.
- */
-
-__EXTERN_INLINE void __iomem *wildfire_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + WILDFIRE_IO_BIAS);
-}
-
-__EXTERN_INLINE void __iomem *wildfire_ioremap(unsigned long addr, 
-					       unsigned long size)
-{
-	return (void __iomem *)(addr + WILDFIRE_MEM_BIAS);
-}
-
-__EXTERN_INLINE int wildfire_is_ioaddr(unsigned long addr)
-{
-	return addr >= WILDFIRE_BASE;
-}
-
-__EXTERN_INLINE int wildfire_is_mmio(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long)xaddr;
-	return (addr & 0x100000000UL) == 0;
-}
-
-#undef __IO_PREFIX
-#define __IO_PREFIX			wildfire
-#define wildfire_trivial_rw_bw		1
-#define wildfire_trivial_rw_lq		1
-#define wildfire_trivial_io_bw		1
-#define wildfire_trivial_io_lq		1
-#define wildfire_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_WILDFIRE__H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/cputime.h b/ANDROID_3.4.5/arch/alpha/include/asm/cputime.h
deleted file mode 100644
index 19577fd9..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_CPUTIME_H
-#define __ALPHA_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ALPHA_CPUTIME_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/current.h b/ANDROID_3.4.5/arch/alpha/include/asm/current.h
deleted file mode 100644
index 094d285a..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/current.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ALPHA_CURRENT_H
-#define _ALPHA_CURRENT_H
-
-#include <linux/thread_info.h>
-
-#define get_current()	(current_thread_info()->task)
-#define current		get_current()
-
-#endif /* _ALPHA_CURRENT_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/delay.h b/ANDROID_3.4.5/arch/alpha/include/asm/delay.h
deleted file mode 100644
index 2aa3f410..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/delay.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ALPHA_DELAY_H
-#define __ALPHA_DELAY_H
-
-extern void __delay(int loops);
-extern void udelay(unsigned long usecs);
-
-extern void ndelay(unsigned long nsecs);
-#define ndelay ndelay
-
-#endif /* defined(__ALPHA_DELAY_H) */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/device.h b/ANDROID_3.4.5/arch/alpha/include/asm/device.h
deleted file mode 100644
index d8f9872b..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/div64.h b/ANDROID_3.4.5/arch/alpha/include/asm/div64.h
deleted file mode 100644
index 6cd978ce..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/dma-mapping.h b/ANDROID_3.4.5/arch/alpha/include/asm/dma-mapping.h
deleted file mode 100644
index dfa32f06..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ALPHA_DMA_MAPPING_H
-#define _ALPHA_DMA_MAPPING_H
-
-#include <linux/dma-attrs.h>
-
-extern struct dma_map_ops *dma_ops;
-
-static inline struct dma_map_ops *get_dma_ops(struct device *dev)
-{
-	return dma_ops;
-}
-
-#include <asm-generic/dma-mapping-common.h>
-
-#define dma_alloc_coherent(d,s,h,f)	dma_alloc_attrs(d,s,h,f,NULL)
-
-static inline void *dma_alloc_attrs(struct device *dev, size_t size,
-				    dma_addr_t *dma_handle, gfp_t gfp,
-				    struct dma_attrs *attrs)
-{
-	return get_dma_ops(dev)->alloc(dev, size, dma_handle, gfp, attrs);
-}
-
-#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL)
-
-static inline void dma_free_attrs(struct device *dev, size_t size,
-				  void *vaddr, dma_addr_t dma_handle,
-				  struct dma_attrs *attrs)
-{
-	get_dma_ops(dev)->free(dev, size, vaddr, dma_handle, attrs);
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return get_dma_ops(dev)->mapping_error(dev, dma_addr);
-}
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return get_dma_ops(dev)->dma_supported(dev, mask);
-}
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	return get_dma_ops(dev)->set_dma_mask(dev, mask);
-}
-
-#define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
-
-#define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-
-#endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/dma.h b/ANDROID_3.4.5/arch/alpha/include/asm/dma.h
deleted file mode 100644
index 87cfdbdf..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/dma.h
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * include/asm-alpha/dma.h
- *
- * This is essentially the same as the i386 DMA stuff, as the AlphaPCs
- * use ISA-compatible dma.  The only extension is support for high-page
- * registers that allow to set the top 8 bits of a 32-bit DMA address.
- * This register should be written last when setting up a DMA address
- * as this will also enable DMA across 64 KB boundaries.
- */
-
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-#define dma_outb	outb
-#define dma_inb		inb
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.  
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0   
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/*
-  ISA DMA limitations on Alpha platforms,
-
-  These may be due to SIO (PCI<->ISA bridge) chipset limitation, or
-  just a wiring limit.
-*/
-
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
-   hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
-
-/* The maximum address for ISA DMA transfer on RUFFIAN,
-   due to an hardware SIO limitation, is 16MB.
-*/
-#define ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS	0x01000000UL
-
-/* The maximum address for ISA DMA transfer on SABLE, and some ALCORs,
-   due to an hardware SIO chip limitation, is 2GB.
-*/
-#define ALPHA_SABLE_MAX_ISA_DMA_ADDRESS		0x80000000UL
-#define ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS		0x80000000UL
-
-/*
-  Maximum address for all the others is the complete 32-bit bus
-  address space.
-*/
-#define ALPHA_MAX_ISA_DMA_ADDRESS		0x100000000UL
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
-#else
-# if defined(CONFIG_ALPHA_XL)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_SABLE)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_ALCOR)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS
-# else
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_MAX_ISA_DMA_ADDRESS
-# endif
-#endif
-
-/* If we have the iommu, we don't have any address limitations on DMA.
-   Otherwise (Nautilus, RX164), we have to have 0-16 Mb DMA zone
-   like i386. */
-#define MAX_DMA_ADDRESS		(alpha_mv.mv_pci_tbi ?	\
-				 ~0UL : IDENT_ADDR + 0x01000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		0x08	/* command register (w) */
-#define DMA1_STAT_REG		0x08	/* status register (r) */
-#define DMA1_REQ_REG            0x09    /* request register (w) */
-#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
-#define DMA1_MODE_REG		0x0B	/* mode register (w) */
-#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
-#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
-#define DMA1_EXT_MODE_REG	(0x400 | DMA1_MODE_REG)
-
-#define DMA2_CMD_REG		0xD0	/* command register (w) */
-#define DMA2_STAT_REG		0xD0	/* status register (r) */
-#define DMA2_REQ_REG            0xD2    /* request register (w) */
-#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
-#define DMA2_MODE_REG		0xD6	/* mode register (w) */
-#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
-#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
-#define DMA2_EXT_MODE_REG	(0x400 | DMA2_MODE_REG)
-
-#define DMA_ADDR_0              0x00    /* DMA address registers */
-#define DMA_ADDR_1              0x02
-#define DMA_ADDR_2              0x04
-#define DMA_ADDR_3              0x06
-#define DMA_ADDR_4              0xC0
-#define DMA_ADDR_5              0xC4
-#define DMA_ADDR_6              0xC8
-#define DMA_ADDR_7              0xCC
-
-#define DMA_CNT_0               0x01    /* DMA count registers */
-#define DMA_CNT_1               0x03
-#define DMA_CNT_2               0x05
-#define DMA_CNT_3               0x07
-#define DMA_CNT_4               0xC2
-#define DMA_CNT_5               0xC6
-#define DMA_CNT_6               0xCA
-#define DMA_CNT_7               0xCE
-
-#define DMA_PAGE_0              0x87    /* DMA page registers */
-#define DMA_PAGE_1              0x83
-#define DMA_PAGE_2              0x81
-#define DMA_PAGE_3              0x82
-#define DMA_PAGE_5              0x8B
-#define DMA_PAGE_6              0x89
-#define DMA_PAGE_7              0x8A
-
-#define DMA_HIPAGE_0		(0x400 | DMA_PAGE_0)
-#define DMA_HIPAGE_1		(0x400 | DMA_PAGE_1)
-#define DMA_HIPAGE_2		(0x400 | DMA_PAGE_2)
-#define DMA_HIPAGE_3		(0x400 | DMA_PAGE_3)
-#define DMA_HIPAGE_4		(0x400 | DMA_PAGE_4)
-#define DMA_HIPAGE_5		(0x400 | DMA_PAGE_5)
-#define DMA_HIPAGE_6		(0x400 | DMA_PAGE_6)
-#define DMA_HIPAGE_7		(0x400 | DMA_PAGE_7)
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* set extended mode for a specific DMA channel */
-static __inline__ void set_dma_ext_mode(unsigned int dmanr, char ext_mode)
-{
-	if (dmanr<=3)
-		dma_outb(ext_mode | dmanr,  DMA1_EXT_MODE_REG);
-	else
-		dma_outb(ext_mode | (dmanr&3),  DMA2_EXT_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
-{
-	switch(dmanr) {
-		case 0:
-			dma_outb(pagenr, DMA_PAGE_0);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_0);
-			break;
-		case 1:
-			dma_outb(pagenr, DMA_PAGE_1);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_1);
-			break;
-		case 2:
-			dma_outb(pagenr, DMA_PAGE_2);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_2);
-			break;
-		case 3:
-			dma_outb(pagenr, DMA_PAGE_3);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_3);
-			break;
-		case 5:
-			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_5);
-			break;
-		case 6:
-			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_6);
-			break;
-		case 7:
-			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
-			dma_outb((pagenr >> 8), DMA_HIPAGE_7);
-			break;
-	}
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-	set_dma_page(dmanr, a>>16);	/* set hipage last to enable 32-bit mode */
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-	
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-#define KERNEL_HAVE_CHECK_DMA
-extern int check_dma(unsigned int dmanr);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-
-#endif /* _ASM_DMA_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/elf.h b/ANDROID_3.4.5/arch/alpha/include/asm/elf.h
deleted file mode 100644
index 968d9991..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/elf.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef __ASM_ALPHA_ELF_H
-#define __ASM_ALPHA_ELF_H
-
-#include <asm/auxvec.h>
-#include <asm/special_insns.h>
-
-/* Special values for the st_other field in the symbol table.  */
-
-#define STO_ALPHA_NOPV		0x80
-#define STO_ALPHA_STD_GPLOAD	0x88
-
-/*
- * Alpha ELF relocation types
- */
-#define R_ALPHA_NONE            0       /* No reloc */
-#define R_ALPHA_REFLONG         1       /* Direct 32 bit */
-#define R_ALPHA_REFQUAD         2       /* Direct 64 bit */
-#define R_ALPHA_GPREL32         3       /* GP relative 32 bit */
-#define R_ALPHA_LITERAL         4       /* GP relative 16 bit w/optimization */
-#define R_ALPHA_LITUSE          5       /* Optimization hint for LITERAL */
-#define R_ALPHA_GPDISP          6       /* Add displacement to GP */
-#define R_ALPHA_BRADDR          7       /* PC+4 relative 23 bit shifted */
-#define R_ALPHA_HINT            8       /* PC+4 relative 16 bit shifted */
-#define R_ALPHA_SREL16          9       /* PC relative 16 bit */
-#define R_ALPHA_SREL32          10      /* PC relative 32 bit */
-#define R_ALPHA_SREL64          11      /* PC relative 64 bit */
-#define R_ALPHA_GPRELHIGH       17      /* GP relative 32 bit, high 16 bits */
-#define R_ALPHA_GPRELLOW        18      /* GP relative 32 bit, low 16 bits */
-#define R_ALPHA_GPREL16         19      /* GP relative 16 bit */
-#define R_ALPHA_COPY            24      /* Copy symbol at runtime */
-#define R_ALPHA_GLOB_DAT        25      /* Create GOT entry */
-#define R_ALPHA_JMP_SLOT        26      /* Create PLT entry */
-#define R_ALPHA_RELATIVE        27      /* Adjust by program base */
-#define R_ALPHA_BRSGP		28
-#define R_ALPHA_TLSGD           29
-#define R_ALPHA_TLS_LDM         30
-#define R_ALPHA_DTPMOD64        31
-#define R_ALPHA_GOTDTPREL       32
-#define R_ALPHA_DTPREL64        33
-#define R_ALPHA_DTPRELHI        34
-#define R_ALPHA_DTPRELLO        35
-#define R_ALPHA_DTPREL16        36
-#define R_ALPHA_GOTTPREL        37
-#define R_ALPHA_TPREL64         38
-#define R_ALPHA_TPRELHI         39
-#define R_ALPHA_TPRELLO         40
-#define R_ALPHA_TPREL16         41
-
-#define SHF_ALPHA_GPREL		0x10000000
-
-/* Legal values for e_flags field of Elf64_Ehdr.  */
-
-#define EF_ALPHA_32BIT		1	/* All addresses are below 2GB */
-
-/*
- * ELF register definitions..
- */
-
-/*
- * The OSF/1 version of <sys/procfs.h> makes gregset_t 46 entries long.
- * I have no idea why that is so.  For now, we just leave it at 33
- * (32 general regs + processor status word). 
- */
-#define ELF_NGREG	33
-#define ELF_NFPREG	32
-
-typedef unsigned long elf_greg_t;
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS64
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_ALPHA
-
-#define ELF_EXEC_PAGESIZE	8192
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x1000000)
-
-/* $0 is set by ld.so to a pointer to a function which might be 
-   registered using atexit.  This provides a mean for the dynamic
-   linker to call DT_FINI functions for shared libraries that have
-   been loaded before the code runs.
-
-   So that we can use the same startup file with static executables,
-   we start programs with a value of 0 to indicate that there is no
-   such function.  */
-
-#define ELF_PLAT_INIT(_r, load_addr)	_r->r0 = 0
-
-/* The registers are laid out in pt_regs for PAL and syscall
-   convenience.  Re-order them for the linear elf_gregset_t.  */
-
-struct pt_regs;
-struct thread_info;
-struct task_struct;
-extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt,
-			    struct thread_info *ti);
-#define ELF_CORE_COPY_REGS(DEST, REGS) \
-	dump_elf_thread(DEST, REGS, current_thread_info());
-
-/* Similar, but for a thread other than current.  */
-
-extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
-	dump_elf_task(*(DEST), TASK)
-
-/* Similar, but for the FP registers.  */
-
-extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
-	dump_elf_task_fp(*(DEST), TASK)
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This is trivial on Alpha, 
-   but not so on other machines. */
-
-#define ELF_HWCAP  (~amask(-1))
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM				\
-({						\
-	enum implver_enum i_ = implver();	\
-	( i_ == IMPLVER_EV4 ? "ev4"		\
-	: i_ == IMPLVER_EV5			\
-	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
-	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
-})
-
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
-extern int alpha_l1i_cacheshape;
-extern int alpha_l1d_cacheshape;
-extern int alpha_l2_cacheshape;
-extern int alpha_l3_cacheshape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO						\
-  do {								\
-    NEW_AUX_ENT(AT_L1I_CACHESHAPE, alpha_l1i_cacheshape);	\
-    NEW_AUX_ENT(AT_L1D_CACHESHAPE, alpha_l1d_cacheshape);	\
-    NEW_AUX_ENT(AT_L2_CACHESHAPE, alpha_l2_cacheshape);		\
-    NEW_AUX_ENT(AT_L3_CACHESHAPE, alpha_l3_cacheshape);		\
-  } while (0)
-
-#endif /* __ASM_ALPHA_ELF_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/emergency-restart.h b/ANDROID_3.4.5/arch/alpha/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c48..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/err_common.h b/ANDROID_3.4.5/arch/alpha/include/asm/err_common.h
deleted file mode 100644
index c2509594..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/err_common.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- *	linux/include/asm-alpha/err_common.h
- *
- *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- *	Contains declarations and macros to support Alpha error handling
- * 	implementations.
- */
-
-#ifndef __ALPHA_ERR_COMMON_H
-#define __ALPHA_ERR_COMMON_H 1
-
-/*
- * SCB Vector definitions
- */
-#define SCB_Q_SYSERR	0x620
-#define SCB_Q_PROCERR	0x630
-#define SCB_Q_SYSMCHK	0x660
-#define SCB_Q_PROCMCHK	0x670
-#define SCB_Q_SYSEVENT	0x680
-
-/*
- * Disposition definitions for logout frame parser
- */
-#define MCHK_DISPOSITION_UNKNOWN_ERROR		0x00
-#define MCHK_DISPOSITION_REPORT			0x01
-#define MCHK_DISPOSITION_DISMISS		0x02
-
-/*
- * Error Log definitions
- */
-/*
- * Types
- */
-
-#define EL_CLASS__TERMINATION		(0)
-#  define EL_TYPE__TERMINATION__TERMINATION		(0)
-#define EL_CLASS__HEADER		(5)
-#  define EL_TYPE__HEADER__SYSTEM_ERROR_FRAME		(1)
-#  define EL_TYPE__HEADER__SYSTEM_EVENT_FRAME		(2)
-#  define EL_TYPE__HEADER__HALT_FRAME			(3)
-#  define EL_TYPE__HEADER__LOGOUT_FRAME			(19)
-#define EL_CLASS__GENERAL_NOTIFICATION	(9)
-#define EL_CLASS__PCI_ERROR_FRAME	(11)
-#define EL_CLASS__REGATTA_FAMILY	(12)
-#  define EL_TYPE__REGATTA__PROCESSOR_ERROR_FRAME	(1)
-#  define EL_TYPE__REGATTA__SYSTEM_ERROR_FRAME		(2)
-#  define EL_TYPE__REGATTA__ENVIRONMENTAL_FRAME		(3)
-#  define EL_TYPE__REGATTA__TITAN_PCHIP0_EXTENDED	(8)
-#  define EL_TYPE__REGATTA__TITAN_PCHIP1_EXTENDED	(9)
-#  define EL_TYPE__REGATTA__TITAN_MEMORY_EXTENDED	(10)
-#  define EL_TYPE__REGATTA__PROCESSOR_DBL_ERROR_HALT	(11)
-#  define EL_TYPE__REGATTA__SYSTEM_DBL_ERROR_HALT	(12)
-#define EL_CLASS__PAL                   (14)
-#  define EL_TYPE__PAL__LOGOUT_FRAME                    (1)
-#  define EL_TYPE__PAL__EV7_PROCESSOR			(4)
-#  define EL_TYPE__PAL__EV7_ZBOX			(5)
-#  define EL_TYPE__PAL__EV7_RBOX			(6)
-#  define EL_TYPE__PAL__EV7_IO				(7)
-#  define EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE	(10)
-#  define EL_TYPE__PAL__ENV__AIRMOVER_FAN		(11)
-#  define EL_TYPE__PAL__ENV__VOLTAGE			(12)
-#  define EL_TYPE__PAL__ENV__INTRUSION			(13)
-#  define EL_TYPE__PAL__ENV__POWER_SUPPLY		(14)
-#  define EL_TYPE__PAL__ENV__LAN			(15)
-#  define EL_TYPE__PAL__ENV__HOT_PLUG			(16)
-
-union el_timestamp {
-	struct {
-		u8 second;
-		u8 minute;
-		u8 hour;
-		u8 day;
-		u8 month;
-		u8 year;
-	} b;
-	u64 as_int;
-};
-
-struct el_subpacket {
-	u16 length;		/* length of header (in bytes)	*/
-	u16 class;		/* header class and type...   	*/
-	u16 type;		/* ...determine content     	*/
-	u16 revision;		/* header revision 		*/
-	union {
-		struct {	/* Class 5, Type 1 - System Error	*/
-			u32 frame_length;
-			u32 frame_packet_count;			
-		} sys_err;			
-		struct {	/* Class 5, Type 2 - System Event 	*/
-			union el_timestamp timestamp;
-			u32 frame_length;
-			u32 frame_packet_count;			
-		} sys_event;
-		struct {	/* Class 5, Type 3 - Double Error Halt	*/
-			u16 halt_code;
-			u16 reserved;
-			union el_timestamp timestamp;
-			u32 frame_length;
-			u32 frame_packet_count;
-		} err_halt;
-		struct {	/* Clasee 5, Type 19 - Logout Frame Header */
-			u32 frame_length;
-			u32 frame_flags;
-			u32 cpu_offset;	
-			u32 system_offset;
-		} logout_header;
-		struct {	/* Class 12 - Regatta			*/
-			u64 cpuid;
-			u64 data_start[1];
-		} regatta_frame;
-		struct {	/* Raw 				        */
-			u64 data_start[1];
-		} raw;
-	} by_type;
-};
-
-#endif /* __ALPHA_ERR_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/err_ev6.h b/ANDROID_3.4.5/arch/alpha/include/asm/err_ev6.h
deleted file mode 100644
index ea637791..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/err_ev6.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_ERR_EV6_H
-#define __ALPHA_ERR_EV6_H 1
-
-/* Dummy include for now. */
-
-#endif /* __ALPHA_ERR_EV6_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/err_ev7.h b/ANDROID_3.4.5/arch/alpha/include/asm/err_ev7.h
deleted file mode 100644
index 87f99777..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/err_ev7.h
+++ /dev/null
@@ -1,202 +0,0 @@
-#ifndef __ALPHA_ERR_EV7_H
-#define __ALPHA_ERR_EV7_H 1
-
-/*
- * Data for el packet class PAL (14), type LOGOUT_FRAME (1)
- */
-struct ev7_pal_logout_subpacket {
-	u32 mchk_code;
-	u32 subpacket_count;
-	u64 whami;
-	u64 rbox_whami;
-	u64 rbox_int;
-	u64 exc_addr;
-	union el_timestamp timestamp;
-	u64 halt_code;
-	u64 reserved;
-};
-
-/*
- * Data for el packet class PAL (14), type EV7_PROCESSOR (4)
- */
-struct ev7_pal_processor_subpacket {
-	u64 i_stat;
-	u64 dc_stat;
-	u64 c_addr;
-	u64 c_syndrome_1;
-	u64 c_syndrome_0;
-	u64 c_stat;
-	u64 c_sts;
-	u64 mm_stat;
-	u64 exc_addr;
-	u64 ier_cm;
-	u64 isum;
-	u64 pal_base;
-	u64 i_ctl;
-	u64 process_context;
-	u64 cbox_ctl;
-	u64 cbox_stp_ctl;
-	u64 cbox_acc_ctl;
-	u64 cbox_lcl_set;
-	u64 cbox_gbl_set;
-	u64 bbox_ctl;
-	u64 bbox_err_sts;
-	u64 bbox_err_idx;
-	u64 cbox_ddp_err_sts;
-	u64 bbox_dat_rmp;
-	u64 reserved[2];
-};
-
-/*
- * Data for el packet class PAL (14), type EV7_ZBOX (5)
- */
-struct ev7_pal_zbox_subpacket {
-	u32 zbox0_dram_err_status_1;
-	u32 zbox0_dram_err_status_2;
-	u32 zbox0_dram_err_status_3;
-	u32 zbox0_dram_err_ctl;
-	u32 zbox0_dram_err_adr;
-	u32 zbox0_dift_timeout;
-	u32 zbox0_dram_mapper_ctl;
-	u32 zbox0_frc_err_adr;
-	u32 zbox0_dift_err_status;
-	u32 reserved1;
-	u32 zbox1_dram_err_status_1;
-	u32 zbox1_dram_err_status_2;
-	u32 zbox1_dram_err_status_3;
-	u32 zbox1_dram_err_ctl;
-	u32 zbox1_dram_err_adr;
-	u32 zbox1_dift_timeout;
-	u32 zbox1_dram_mapper_ctl;
-	u32 zbox1_frc_err_adr;
-	u32 zbox1_dift_err_status;
-	u32 reserved2;
-	u64 cbox_ctl;
-	u64 cbox_stp_ctl;
-	u64 zbox0_error_pa;
-	u64 zbox1_error_pa;
-	u64 zbox0_ored_syndrome;
-	u64 zbox1_ored_syndrome;
-	u64 reserved3[2];
-};
-
-/*
- * Data for el packet class PAL (14), type EV7_RBOX (6)
- */
-struct ev7_pal_rbox_subpacket {
-	u64 rbox_cfg;
-	u64 rbox_n_cfg;
-	u64 rbox_s_cfg;
-	u64 rbox_e_cfg;
-	u64 rbox_w_cfg;
-	u64 rbox_n_err;
-	u64 rbox_s_err;
-	u64 rbox_e_err;
-	u64 rbox_w_err;
-	u64 rbox_io_cfg;
-	u64 rbox_io_err;
-	u64 rbox_l_err;
-	u64 rbox_whoami;
-	u64 rbox_imask;
-	u64 rbox_intq;
-	u64 rbox_int;
-	u64 reserved[2];
-};
-
-/*
- * Data for el packet class PAL (14), type EV7_IO (7)
- */
-struct ev7_pal_io_one_port {
-	u64 pox_err_sum;
-	u64 pox_tlb_err;
-	u64 pox_spl_cmplt;
-	u64 pox_trans_sum;
-	u64 pox_first_err;
-	u64 pox_mult_err;
-	u64 pox_dm_source;
-	u64 pox_dm_dest;
-	u64 pox_dm_size;
-	u64 pox_dm_ctrl;
-	u64 reserved;
-};
-
-struct ev7_pal_io_subpacket {
-	u64 io_asic_rev;
-	u64 io_sys_rev;
-	u64 io7_uph;
-	u64 hpi_ctl;
-	u64 crd_ctl;
-	u64 hei_ctl;
-	u64 po7_error_sum;
-	u64 po7_uncrr_sym;
-	u64 po7_crrct_sym;
-	u64 po7_ugbge_sym;
-	u64 po7_err_pkt0;
-	u64 po7_err_pkt1;
-	u64 reserved[2];
-	struct ev7_pal_io_one_port ports[4];
-};
-
-/*
- * Environmental subpacket. Data used for el packets:
- * 	   class PAL (14), type AMBIENT_TEMPERATURE (10)
- * 	   class PAL (14), type AIRMOVER_FAN (11)
- * 	   class PAL (14), type VOLTAGE (12)
- * 	   class PAL (14), type INTRUSION (13)
- *	   class PAL (14), type POWER_SUPPLY (14)
- *	   class PAL (14), type LAN (15)
- *	   class PAL (14), type HOT_PLUG (16)
- */
-struct ev7_pal_environmental_subpacket {
-	u16 cabinet;
-	u16 drawer;
-	u16 reserved1[2];
-	u8 module_type;
-	u8 unit_id;		/* unit reporting condition */
-	u8 reserved2;
-	u8 condition;		/* condition reported       */
-};
-
-/*
- * Convert environmental type to index
- */
-static inline int ev7_lf_env_index(int type)
-{
-	BUG_ON((type < EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE) 
-	       || (type > EL_TYPE__PAL__ENV__HOT_PLUG));
-
-	return type - EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE;
-}
-
-/*
- * Data for generic el packet class PAL.
- */
-struct ev7_pal_subpacket {
-	union {
-		struct ev7_pal_logout_subpacket logout;	     /* Type     1 */
-		struct ev7_pal_processor_subpacket ev7;	     /* Type     4 */
-		struct ev7_pal_zbox_subpacket zbox;	     /* Type     5 */
-		struct ev7_pal_rbox_subpacket rbox;	     /* Type     6 */
-		struct ev7_pal_io_subpacket io;		     /* Type     7 */
-		struct ev7_pal_environmental_subpacket env;  /* Type 10-16 */
-		u64 as_quad[1];				     /* Raw u64    */
-	} by_type;
-};
-
-/*
- * Struct to contain collected logout from subpackets.
- */
-struct ev7_lf_subpackets {
-	struct ev7_pal_logout_subpacket *logout;		/* Type  1 */
-	struct ev7_pal_processor_subpacket *ev7;		/* Type  4 */
-	struct ev7_pal_zbox_subpacket *zbox;			/* Type  5 */
-	struct ev7_pal_rbox_subpacket *rbox;			/* Type  6 */
-	struct ev7_pal_io_subpacket *io;			/* Type  7 */
-	struct ev7_pal_environmental_subpacket *env[7];	     /* Type 10-16 */
-
-	unsigned int io_pid;
-};
-
-#endif /* __ALPHA_ERR_EV7_H */
-
-
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/errno.h b/ANDROID_3.4.5/arch/alpha/include/asm/errno.h
deleted file mode 100644
index e5f29ca2..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/errno.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _ALPHA_ERRNO_H
-#define _ALPHA_ERRNO_H
-
-#include <asm-generic/errno-base.h>
-
-#undef	EAGAIN			/* 11 in errno-base.h */
-
-#define	EDEADLK		11	/* Resource deadlock would occur */
-
-#define	EAGAIN		35	/* Try again */
-#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
-#define	EINPROGRESS	36	/* Operation now in progress */
-#define	EALREADY	37	/* Operation already in progress */
-#define	ENOTSOCK	38	/* Socket operation on non-socket */
-#define	EDESTADDRREQ	39	/* Destination address required */
-#define	EMSGSIZE	40	/* Message too long */
-#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
-#define	ENOPROTOOPT	42	/* Protocol not available */
-#define	EPROTONOSUPPORT	43	/* Protocol not supported */
-#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
-#define	EOPNOTSUPP	45	/* Operation not supported on transport endpoint */
-#define	EPFNOSUPPORT	46	/* Protocol family not supported */
-#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
-#define	EADDRINUSE	48	/* Address already in use */
-#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
-#define	ENETDOWN	50	/* Network is down */
-#define	ENETUNREACH	51	/* Network is unreachable */
-#define	ENETRESET	52	/* Network dropped connection because of reset */
-#define	ECONNABORTED	53	/* Software caused connection abort */
-#define	ECONNRESET	54	/* Connection reset by peer */
-#define	ENOBUFS		55	/* No buffer space available */
-#define	EISCONN		56	/* Transport endpoint is already connected */
-#define	ENOTCONN	57	/* Transport endpoint is not connected */
-#define	ESHUTDOWN	58	/* Cannot send after transport endpoint shutdown */
-#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
-#define	ETIMEDOUT	60	/* Connection timed out */
-#define	ECONNREFUSED	61	/* Connection refused */
-#define	ELOOP		62	/* Too many symbolic links encountered */
-#define	ENAMETOOLONG	63	/* File name too long */
-#define	EHOSTDOWN	64	/* Host is down */
-#define	EHOSTUNREACH	65	/* No route to host */
-#define	ENOTEMPTY	66	/* Directory not empty */
-
-#define	EUSERS		68	/* Too many users */
-#define	EDQUOT		69	/* Quota exceeded */
-#define	ESTALE		70	/* Stale NFS file handle */
-#define	EREMOTE		71	/* Object is remote */
-
-#define	ENOLCK		77	/* No record locks available */
-#define	ENOSYS		78	/* Function not implemented */
-
-#define	ENOMSG		80	/* No message of desired type */
-#define	EIDRM		81	/* Identifier removed */
-#define	ENOSR		82	/* Out of streams resources */
-#define	ETIME		83	/* Timer expired */
-#define	EBADMSG		84	/* Not a data message */
-#define	EPROTO		85	/* Protocol error */
-#define	ENODATA		86	/* No data available */
-#define	ENOSTR		87	/* Device not a stream */
-
-#define	ENOPKG		92	/* Package not installed */
-
-#define	EILSEQ		116	/* Illegal byte sequence */
-
-/* The following are just random noise.. */
-#define	ECHRNG		88	/* Channel number out of range */
-#define	EL2NSYNC	89	/* Level 2 not synchronized */
-#define	EL3HLT		90	/* Level 3 halted */
-#define	EL3RST		91	/* Level 3 reset */
-
-#define	ELNRNG		93	/* Link number out of range */
-#define	EUNATCH		94	/* Protocol driver not attached */
-#define	ENOCSI		95	/* No CSI structure available */
-#define	EL2HLT		96	/* Level 2 halted */
-#define	EBADE		97	/* Invalid exchange */
-#define	EBADR		98	/* Invalid request descriptor */
-#define	EXFULL		99	/* Exchange full */
-#define	ENOANO		100	/* No anode */
-#define	EBADRQC		101	/* Invalid request code */
-#define	EBADSLT		102	/* Invalid slot */
-
-#define	EDEADLOCK	EDEADLK
-
-#define	EBFONT		104	/* Bad font file format */
-#define	ENONET		105	/* Machine is not on the network */
-#define	ENOLINK		106	/* Link has been severed */
-#define	EADV		107	/* Advertise error */
-#define	ESRMNT		108	/* Srmount error */
-#define	ECOMM		109	/* Communication error on send */
-#define	EMULTIHOP	110	/* Multihop attempted */
-#define	EDOTDOT		111	/* RFS specific error */
-#define	EOVERFLOW	112	/* Value too large for defined data type */
-#define	ENOTUNIQ	113	/* Name not unique on network */
-#define	EBADFD		114	/* File descriptor in bad state */
-#define	EREMCHG		115	/* Remote address changed */
-
-#define	EUCLEAN		117	/* Structure needs cleaning */
-#define	ENOTNAM		118	/* Not a XENIX named type file */
-#define	ENAVAIL		119	/* No XENIX semaphores available */
-#define	EISNAM		120	/* Is a named type file */
-#define	EREMOTEIO	121	/* Remote I/O error */
-
-#define	ELIBACC		122	/* Can not access a needed shared library */
-#define	ELIBBAD		123	/* Accessing a corrupted shared library */
-#define	ELIBSCN		124	/* .lib section in a.out corrupted */
-#define	ELIBMAX		125	/* Attempting to link in too many shared libraries */
-#define	ELIBEXEC	126	/* Cannot exec a shared library directly */
-#define	ERESTART	127	/* Interrupted system call should be restarted */
-#define	ESTRPIPE	128	/* Streams pipe error */
-
-#define ENOMEDIUM	129	/* No medium found */
-#define EMEDIUMTYPE	130	/* Wrong medium type */
-#define	ECANCELED	131	/* Operation Cancelled */
-#define	ENOKEY		132	/* Required key not available */
-#define	EKEYEXPIRED	133	/* Key has expired */
-#define	EKEYREVOKED	134	/* Key has been revoked */
-#define	EKEYREJECTED	135	/* Key was rejected by service */
-
-/* for robust mutexes */
-#define	EOWNERDEAD	136	/* Owner died */
-#define	ENOTRECOVERABLE	137	/* State not recoverable */
-
-#define	ERFKILL		138	/* Operation not possible due to RF-kill */
-
-#define EHWPOISON	139	/* Memory page has hardware error */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/exec.h b/ANDROID_3.4.5/arch/alpha/include/asm/exec.h
deleted file mode 100644
index 4a5a41f3..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/exec.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_EXEC_H
-#define __ALPHA_EXEC_H
-
-#define arch_align_stack(x) (x)
-
-#endif /* __ALPHA_EXEC_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/fb.h b/ANDROID_3.4.5/arch/alpha/include/asm/fb.h
deleted file mode 100644
index fa9bbb96..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/fb.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/device.h>
-
-/* Caching is off in the I/O space quadrant by design.  */
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/fcntl.h b/ANDROID_3.4.5/arch/alpha/include/asm/fcntl.h
deleted file mode 100644
index 6d9e805f..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/fcntl.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _ALPHA_FCNTL_H
-#define _ALPHA_FCNTL_H
-
-#define O_CREAT		 01000	/* not fcntl */
-#define O_TRUNC		 02000	/* not fcntl */
-#define O_EXCL		 04000	/* not fcntl */
-#define O_NOCTTY	010000	/* not fcntl */
-
-#define O_NONBLOCK	 00004
-#define O_APPEND	 00010
-#define O_DSYNC		040000	/* used to be O_SYNC, see below */
-#define O_DIRECTORY	0100000	/* must be a directory */
-#define O_NOFOLLOW	0200000 /* don't follow links */
-#define O_LARGEFILE	0400000 /* will be set by the kernel on every open */
-#define O_DIRECT	02000000 /* direct disk access - should check with OSF/1 */
-#define O_NOATIME	04000000
-#define O_CLOEXEC	010000000 /* set close_on_exec */
-/*
- * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
- * the O_SYNC flag.  We continue to use the existing numerical value
- * for O_DSYNC semantics now, but using the correct symbolic name for it.
- * This new value is used to request true Posix O_SYNC semantics.  It is
- * defined in this strange way to make sure applications compiled against
- * new headers get at least O_DSYNC semantics on older kernels.
- *
- * This has the nice side-effect that we can simply test for O_DSYNC
- * wherever we do not care if O_DSYNC or O_SYNC is used.
- *
- * Note: __O_SYNC must never be used directly.
- */
-#define __O_SYNC	020000000
-#define O_SYNC		(__O_SYNC|O_DSYNC)
-
-#define O_PATH		040000000
-
-#define F_GETLK		7
-#define F_SETLK		8
-#define F_SETLKW	9
-
-#define F_SETOWN	5	/*  for sockets. */
-#define F_GETOWN	6	/*  for sockets. */
-#define F_SETSIG	10	/*  for sockets. */
-#define F_GETSIG	11	/*  for sockets. */
-
-/* for posix fcntl() and lockf() */
-#define F_RDLCK		1
-#define F_WRLCK		2
-#define F_UNLCK		8
-
-/* for old implementation of bsd flock () */
-#define F_EXLCK		16	/* or 3 */
-#define F_SHLCK		32	/* or 4 */
-
-#include <asm-generic/fcntl.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/floppy.h b/ANDROID_3.4.5/arch/alpha/include/asm/floppy.h
deleted file mode 100644
index 46cefbd5..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/floppy.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_ALPHA_FLOPPY_H
-#define __ASM_ALPHA_FLOPPY_H
-
-
-#define fd_inb(port)			inb_p(port)
-#define fd_outb(value,port)		outb_p(value,port)
-
-#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
-#define fd_disable_dma()        disable_dma(FLOPPY_DMA)
-#define fd_request_dma()        request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma()           free_dma(FLOPPY_DMA)
-#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
-#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
-#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
-#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
-#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
-#define fd_cacheflush(addr,size) /* nothing */
-#define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    IRQF_DISABLED, "floppy", NULL)
-#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
-
-#ifdef CONFIG_PCI
-
-#include <linux/pci.h>
-
-#define fd_dma_setup(addr,size,mode,io) alpha_fd_dma_setup(addr,size,mode,io)
-
-static __inline__ int 
-alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-	static unsigned long prev_size;
-	static dma_addr_t bus_addr = 0;
-	static char *prev_addr;
-	static int prev_dir;
-	int dir;
-
-	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
-
-	if (bus_addr 
-	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
-		/* different from last time -- unmap prev */
-		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
-		bus_addr = 0;
-	}
-
-	if (!bus_addr)	/* need to map it */
-		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
-
-	/* remember this one as prev */
-	prev_addr = addr;
-	prev_size = size;
-	prev_dir = dir;
-
-	fd_clear_dma_ff();
-	fd_cacheflush(addr, size);
-	fd_set_dma_mode(mode);
-	set_dma_addr(FLOPPY_DMA, bus_addr);
-	fd_set_dma_count(size);
-	virtual_dma_port = io;
-	fd_enable_dma();
-
-	return 0;
-}
-
-#endif /* CONFIG_PCI */
-
-__inline__ void virtual_dma_init(void)
-{
-	/* Nothing to do on an Alpha */
-}
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Again, the CMOS information doesn't work on the alpha..
- */
-#define FLOPPY0_TYPE 6
-#define FLOPPY1_TYPE 0
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/fpu.h b/ANDROID_3.4.5/arch/alpha/include/asm/fpu.h
deleted file mode 100644
index db00f788..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/fpu.h
+++ /dev/null
@@ -1,195 +0,0 @@
-#ifndef __ASM_ALPHA_FPU_H
-#define __ASM_ALPHA_FPU_H
-
-#include <asm/special_insns.h>
-
-/*
- * Alpha floating-point control register defines:
- */
-#define FPCR_DNOD	(1UL<<47)	/* denorm INV trap disable */
-#define FPCR_DNZ	(1UL<<48)	/* denorms to zero */
-#define FPCR_INVD	(1UL<<49)	/* invalid op disable (opt.) */
-#define FPCR_DZED	(1UL<<50)	/* division by zero disable (opt.) */
-#define FPCR_OVFD	(1UL<<51)	/* overflow disable (optional) */
-#define FPCR_INV	(1UL<<52)	/* invalid operation */
-#define FPCR_DZE	(1UL<<53)	/* division by zero */
-#define FPCR_OVF	(1UL<<54)	/* overflow */
-#define FPCR_UNF	(1UL<<55)	/* underflow */
-#define FPCR_INE	(1UL<<56)	/* inexact */
-#define FPCR_IOV	(1UL<<57)	/* integer overflow */
-#define FPCR_UNDZ	(1UL<<60)	/* underflow to zero (opt.) */
-#define FPCR_UNFD	(1UL<<61)	/* underflow disable (opt.) */
-#define FPCR_INED	(1UL<<62)	/* inexact disable (opt.) */
-#define FPCR_SUM	(1UL<<63)	/* summary bit */
-
-#define FPCR_DYN_SHIFT	58		/* first dynamic rounding mode bit */
-#define FPCR_DYN_CHOPPED (0x0UL << FPCR_DYN_SHIFT)	/* towards 0 */
-#define FPCR_DYN_MINUS	 (0x1UL << FPCR_DYN_SHIFT)	/* towards -INF */
-#define FPCR_DYN_NORMAL	 (0x2UL << FPCR_DYN_SHIFT)	/* towards nearest */
-#define FPCR_DYN_PLUS	 (0x3UL << FPCR_DYN_SHIFT)	/* towards +INF */
-#define FPCR_DYN_MASK	 (0x3UL << FPCR_DYN_SHIFT)
-
-#define FPCR_MASK	0xffff800000000000L
-
-/*
- * IEEE trap enables are implemented in software.  These per-thread
- * bits are stored in the "ieee_state" field of "struct thread_info".
- * Thus, the bits are defined so as not to conflict with the
- * floating-point enable bit (which is architected).  On top of that,
- * we want to make these bits compatible with OSF/1 so
- * ieee_set_fp_control() etc. can be implemented easily and
- * compatibly.  The corresponding definitions are in
- * /usr/include/machine/fpu.h under OSF/1.
- */
-#define IEEE_TRAP_ENABLE_INV	(1UL<<1)	/* invalid op */
-#define IEEE_TRAP_ENABLE_DZE	(1UL<<2)	/* division by zero */
-#define IEEE_TRAP_ENABLE_OVF	(1UL<<3)	/* overflow */
-#define IEEE_TRAP_ENABLE_UNF	(1UL<<4)	/* underflow */
-#define IEEE_TRAP_ENABLE_INE	(1UL<<5)	/* inexact */
-#define IEEE_TRAP_ENABLE_DNO	(1UL<<6)	/* denorm */
-#define IEEE_TRAP_ENABLE_MASK	(IEEE_TRAP_ENABLE_INV | IEEE_TRAP_ENABLE_DZE |\
-				 IEEE_TRAP_ENABLE_OVF | IEEE_TRAP_ENABLE_UNF |\
-				 IEEE_TRAP_ENABLE_INE | IEEE_TRAP_ENABLE_DNO)
-
-/* Denorm and Underflow flushing */
-#define IEEE_MAP_DMZ		(1UL<<12)	/* Map denorm inputs to zero */
-#define IEEE_MAP_UMZ		(1UL<<13)	/* Map underflowed outputs to zero */
-
-#define IEEE_MAP_MASK		(IEEE_MAP_DMZ | IEEE_MAP_UMZ)
-
-/* status bits coming from fpcr: */
-#define IEEE_STATUS_INV		(1UL<<17)
-#define IEEE_STATUS_DZE		(1UL<<18)
-#define IEEE_STATUS_OVF		(1UL<<19)
-#define IEEE_STATUS_UNF		(1UL<<20)
-#define IEEE_STATUS_INE		(1UL<<21)
-#define IEEE_STATUS_DNO		(1UL<<22)
-
-#define IEEE_STATUS_MASK	(IEEE_STATUS_INV | IEEE_STATUS_DZE |	\
-				 IEEE_STATUS_OVF | IEEE_STATUS_UNF |	\
-				 IEEE_STATUS_INE | IEEE_STATUS_DNO)
-
-#define IEEE_SW_MASK		(IEEE_TRAP_ENABLE_MASK |		\
-				 IEEE_STATUS_MASK | IEEE_MAP_MASK)
-
-#define IEEE_CURRENT_RM_SHIFT	32
-#define IEEE_CURRENT_RM_MASK	(3UL<<IEEE_CURRENT_RM_SHIFT)
-
-#define IEEE_STATUS_TO_EXCSUM_SHIFT	16
-
-#define IEEE_INHERIT    (1UL<<63)	/* inherit on thread create? */
-
-/*
- * Convert the software IEEE trap enable and status bits into the
- * hardware fpcr format. 
- *
- * Digital Unix engineers receive my thanks for not defining the
- * software bits identical to the hardware bits.  The chip designers
- * receive my thanks for making all the not-implemented fpcr bits
- * RAZ forcing us to use system calls to read/write this value.
- */
-
-static inline unsigned long
-ieee_swcr_to_fpcr(unsigned long sw)
-{
-	unsigned long fp;
-	fp = (sw & IEEE_STATUS_MASK) << 35;
-	fp |= (sw & IEEE_MAP_DMZ) << 36;
-	fp |= (sw & IEEE_STATUS_MASK ? FPCR_SUM : 0);
-	fp |= (~sw & (IEEE_TRAP_ENABLE_INV
-		      | IEEE_TRAP_ENABLE_DZE
-		      | IEEE_TRAP_ENABLE_OVF)) << 48;
-	fp |= (~sw & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE)) << 57;
-	fp |= (sw & IEEE_MAP_UMZ ? FPCR_UNDZ | FPCR_UNFD : 0);
-	fp |= (~sw & IEEE_TRAP_ENABLE_DNO) << 41;
-	return fp;
-}
-
-static inline unsigned long
-ieee_fpcr_to_swcr(unsigned long fp)
-{
-	unsigned long sw;
-	sw = (fp >> 35) & IEEE_STATUS_MASK;
-	sw |= (fp >> 36) & IEEE_MAP_DMZ;
-	sw |= (~fp >> 48) & (IEEE_TRAP_ENABLE_INV
-			     | IEEE_TRAP_ENABLE_DZE
-			     | IEEE_TRAP_ENABLE_OVF);
-	sw |= (~fp >> 57) & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE);
-	sw |= (fp >> 47) & IEEE_MAP_UMZ;
-	sw |= (~fp >> 41) & IEEE_TRAP_ENABLE_DNO;
-	return sw;
-}
-
-#ifdef __KERNEL__
-
-/* The following two functions don't need trapb/excb instructions
-   around the mf_fpcr/mt_fpcr instructions because (a) the kernel
-   never generates arithmetic faults and (b) call_pal instructions
-   are implied trap barriers.  */
-
-static inline unsigned long
-rdfpcr(void)
-{
-	unsigned long tmp, ret;
-
-#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"ftoit $f0,%1\n\t"
-		"itoft %0,$f0"
-		: "=r"(tmp), "=r"(ret));
-#else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"stt $f0,%1\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp), "=m"(ret));
-#endif
-
-	return ret;
-}
-
-static inline void
-wrfpcr(unsigned long val)
-{
-	unsigned long tmp;
-
-#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"itoft %1,$f0\n\t"
-		"mt_fpcr $f0\n\t"
-		"itoft %0,$f0"
-		: "=&r"(tmp) : "r"(val));
-#else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"ldt $f0,%1\n\t"
-		"mt_fpcr $f0\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp) : "m"(val));
-#endif
-}
-
-static inline unsigned long
-swcr_update_status(unsigned long swcr, unsigned long fpcr)
-{
-	/* EV6 implements most of the bits in hardware.  Collect
-	   the acrued exception bits from the real fpcr.  */
-	if (implver() == IMPLVER_EV6) {
-		swcr &= ~IEEE_STATUS_MASK;
-		swcr |= (fpcr >> 35) & IEEE_STATUS_MASK;
-	}
-	return swcr;
-}
-
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_ALPHA_FPU_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/ftrace.h b/ANDROID_3.4.5/arch/alpha/include/asm/ftrace.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/ftrace.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/futex.h b/ANDROID_3.4.5/arch/alpha/include/asm/futex.h
deleted file mode 100644
index f9397943..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/futex.h
+++ /dev/null
@@ -1,119 +0,0 @@
-#ifndef _ASM_ALPHA_FUTEX_H
-#define _ASM_ALPHA_FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-#include <asm/barrier.h>
-
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
-	__asm__ __volatile__(					\
-		__ASM_SMP_MB					\
-	"1:	ldl_l	%0,0(%2)\n"				\
-		insn						\
-	"2:	stl_c	%1,0(%2)\n"				\
-	"	beq	%1,4f\n"				\
-	"	mov	$31,%1\n"				\
-	"3:	.subsection 2\n"				\
-	"4:	br	1b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.long	1b-.\n"					\
-	"	lda	$31,3b-1b(%1)\n"			\
-	"	.long	2b-.\n"					\
-	"	lda	$31,3b-2b(%1)\n"			\
-	"	.previous\n"					\
-	:	"=&r" (oldval), "=&r"(ret)			\
-	:	"r" (uaddr), "r"(oparg)				\
-	:	"memory")
-
-static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	pagefault_disable();
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
-			      u32 oldval, u32 newval)
-{
-	int ret = 0, cmp;
-	u32 prev;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	__asm__ __volatile__ (
-		__ASM_SMP_MB
-	"1:	ldl_l	%1,0(%3)\n"
-	"	cmpeq	%1,%4,%2\n"
-	"	beq	%2,3f\n"
-	"	mov	%5,%2\n"
-	"2:	stl_c	%2,0(%3)\n"
-	"	beq	%2,4f\n"
-	"3:	.subsection 2\n"
-	"4:	br	1b\n"
-	"	.previous\n"
-	"	.section __ex_table,\"a\"\n"
-	"	.long	1b-.\n"
-	"	lda	$31,3b-1b(%0)\n"
-	"	.long	2b-.\n"
-	"	lda	$31,3b-2b(%0)\n"
-	"	.previous\n"
-	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
-	:	"memory");
-
-	*uval = prev;
-	return ret;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_ALPHA_FUTEX_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/gct.h b/ANDROID_3.4.5/arch/alpha/include/asm/gct.h
deleted file mode 100644
index 3504c704..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/gct.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ALPHA_GCT_H
-#define __ALPHA_GCT_H
-
-typedef u64 gct_id;
-typedef u64 gct6_handle;
-
-typedef struct __gct6_node {
-	u8 type;	
-	u8 subtype;
-	u16 size;
-	u32 hd_extension;
-	gct6_handle owner;
-	gct6_handle active_user;
-	gct_id id;
-	u64 flags;
-	u16 rev;
-	u16 change_counter;
-	u16 max_child;
-	u16 reserved1;
-	gct6_handle saved_owner;
-	gct6_handle affinity;
-	gct6_handle parent;
-	gct6_handle next;
-	gct6_handle prev;
-	gct6_handle child;
-	u64 fw_flags;
-	u64 os_usage;
-	u64 fru_id;
-	u32 checksum;
-	u32 magic;	/* 'GLXY' */
-} gct6_node;
-
-typedef struct {
-	u8 type;	
-	u8 subtype;
-	void (*callout)(gct6_node *);
-} gct6_search_struct;
-
-#define GCT_NODE_MAGIC	  0x59584c47	/* 'GLXY' */
-
-/* 
- * node types 
- */
-#define GCT_TYPE_HOSE			0x0E
-
-/*
- * node subtypes
- */
-#define GCT_SUBTYPE_IO_PORT_MODULE	0x2C
-
-#define GCT_NODE_PTR(off) ((gct6_node *)((char *)hwrpb + 		\
-					 hwrpb->frut_offset + 		\
-					 (gct6_handle)(off)))		\
-
-int gct6_find_nodes(gct6_node *, gct6_search_struct *);
-
-#endif /* __ALPHA_GCT_H */
-
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/gentrap.h b/ANDROID_3.4.5/arch/alpha/include/asm/gentrap.h
deleted file mode 100644
index ae50cc31..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/gentrap.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _ASMAXP_GENTRAP_H
-#define _ASMAXP_GENTRAP_H
-
-/*
- * Definitions for gentrap causes.  They are generated by user-level
- * programs and therefore should be compatible with the corresponding
- * OSF/1 definitions.
- */
-#define GEN_INTOVF	-1	/* integer overflow */
-#define GEN_INTDIV	-2	/* integer division by zero */
-#define GEN_FLTOVF	-3	/* fp overflow */
-#define GEN_FLTDIV	-4	/* fp division by zero */
-#define GEN_FLTUND	-5	/* fp underflow */
-#define GEN_FLTINV	-6	/* invalid fp operand */
-#define GEN_FLTINE	-7	/* inexact fp operand */
-#define GEN_DECOVF	-8	/* decimal overflow (for COBOL??) */
-#define GEN_DECDIV	-9	/* decimal division by zero */
-#define GEN_DECINV	-10	/* invalid decimal operand */
-#define GEN_ROPRAND	-11	/* reserved operand */
-#define GEN_ASSERTERR	-12	/* assertion error */
-#define GEN_NULPTRERR	-13	/* null pointer error */
-#define GEN_STKOVF	-14	/* stack overflow */
-#define GEN_STRLENERR	-15	/* string length error */
-#define GEN_SUBSTRERR	-16	/* substring error */
-#define GEN_RANGERR	-17	/* range error */
-#define GEN_SUBRNG	-18
-#define GEN_SUBRNG1	-19	 
-#define GEN_SUBRNG2	-20
-#define GEN_SUBRNG3	-21	/* these report range errors for */
-#define GEN_SUBRNG4	-22	/* subscripting (indexing) at levels 0..7 */
-#define GEN_SUBRNG5	-23
-#define GEN_SUBRNG6	-24
-#define GEN_SUBRNG7	-25
-
-/* the remaining codes (-26..-1023) are reserved. */
-
-#endif /* _ASMAXP_GENTRAP_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/gpio.h b/ANDROID_3.4.5/arch/alpha/include/asm/gpio.h
deleted file mode 100644
index 7dc6a634..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Generic GPIO API implementation for Alpha.
- *
- * A stright copy of that for PowerPC which was:
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_ALPHA_GPIO_H
-#define _ASM_ALPHA_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ASM_ALPHA_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/hardirq.h b/ANDROID_3.4.5/arch/alpha/include/asm/hardirq.h
deleted file mode 100644
index 242c09ba..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/hardirq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ALPHA_HARDIRQ_H
-#define _ALPHA_HARDIRQ_H
-
-void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-
-#include <asm-generic/hardirq.h>
-
-#endif /* _ALPHA_HARDIRQ_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/hw_irq.h b/ANDROID_3.4.5/arch/alpha/include/asm/hw_irq.h
deleted file mode 100644
index 5050ac81..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/hw_irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ALPHA_HW_IRQ_H
-#define _ALPHA_HW_IRQ_H
-
-
-extern volatile unsigned long irq_err_count;
-DECLARE_PER_CPU(unsigned long, irq_pmi_count);
-
-#ifdef CONFIG_ALPHA_GENERIC
-#define ACTUAL_NR_IRQS	alpha_mv.nr_irqs
-#else
-#define ACTUAL_NR_IRQS	NR_IRQS
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/hwrpb.h b/ANDROID_3.4.5/arch/alpha/include/asm/hwrpb.h
deleted file mode 100644
index 8e8f871a..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/hwrpb.h
+++ /dev/null
@@ -1,220 +0,0 @@
-#ifndef __ALPHA_HWRPB_H
-#define __ALPHA_HWRPB_H
-
-#define INIT_HWRPB ((struct hwrpb_struct *) 0x10000000)
-
-/*
- * DEC processor types for Alpha systems.  Found in HWRPB.
- * These values are architected.
- */
-
-#define EV3_CPU                 1       /* EV3                  */
-#define EV4_CPU                 2       /* EV4 (21064)          */
-#define LCA4_CPU                4       /* LCA4 (21066/21068)   */
-#define EV5_CPU                 5       /* EV5 (21164)          */
-#define EV45_CPU                6       /* EV4.5 (21064/xxx)    */
-#define EV56_CPU		7	/* EV5.6 (21164)	*/
-#define EV6_CPU			8	/* EV6 (21264)		*/
-#define PCA56_CPU		9	/* PCA56 (21164PC)	*/
-#define PCA57_CPU		10	/* PCA57 (notyet)	*/
-#define EV67_CPU		11	/* EV67 (21264A)	*/
-#define EV68CB_CPU		12	/* EV68CB (21264C)	*/
-#define EV68AL_CPU		13	/* EV68AL (21264B)	*/
-#define EV68CX_CPU		14	/* EV68CX (21264D)	*/
-#define EV7_CPU			15	/* EV7 (21364)		*/
-#define EV79_CPU		16	/* EV79 (21364??)	*/
-#define EV69_CPU		17	/* EV69 (21264/EV69A)	*/
-
-/*
- * DEC system types for Alpha systems.  Found in HWRPB.
- * These values are architected.
- */
-
-#define ST_ADU			  1	/* Alpha ADU systype	*/
-#define ST_DEC_4000		  2	/* Cobra systype	*/
-#define ST_DEC_7000		  3	/* Ruby systype		*/
-#define ST_DEC_3000_500		  4	/* Flamingo systype	*/
-#define ST_DEC_2000_300		  6	/* Jensen systype	*/
-#define ST_DEC_3000_300		  7	/* Pelican systype	*/
-#define ST_DEC_2100_A500	  9	/* Sable systype	*/
-#define ST_DEC_AXPVME_64	 10	/* AXPvme system type	*/
-#define ST_DEC_AXPPCI_33	 11	/* NoName system type	*/
-#define ST_DEC_TLASER		 12	/* Turbolaser systype	*/
-#define ST_DEC_2100_A50		 13	/* Avanti systype	*/
-#define ST_DEC_MUSTANG		 14	/* Mustang systype	*/
-#define ST_DEC_ALCOR		 15	/* Alcor (EV5) systype	*/
-#define ST_DEC_1000		 17	/* Mikasa systype	*/
-#define ST_DEC_EB64		 18	/* EB64 systype		*/
-#define ST_DEC_EB66		 19	/* EB66 systype		*/
-#define ST_DEC_EB64P		 20	/* EB64+ systype	*/
-#define ST_DEC_BURNS		 21	/* laptop systype	*/
-#define ST_DEC_RAWHIDE		 22	/* Rawhide systype	*/
-#define ST_DEC_K2		 23	/* K2 systype		*/
-#define ST_DEC_LYNX		 24	/* Lynx systype		*/
-#define ST_DEC_XL		 25	/* Alpha XL systype	*/
-#define ST_DEC_EB164		 26	/* EB164 systype	*/
-#define ST_DEC_NORITAKE		 27	/* Noritake systype	*/
-#define ST_DEC_CORTEX		 28	/* Cortex systype	*/
-#define ST_DEC_MIATA		 30	/* Miata systype        */
-#define ST_DEC_XXM		 31	/* XXM systype		*/
-#define ST_DEC_TAKARA		 32	/* Takara systype	*/
-#define ST_DEC_YUKON		 33	/* Yukon systype	*/
-#define ST_DEC_TSUNAMI		 34	/* Tsunami systype	*/
-#define ST_DEC_WILDFIRE		 35	/* Wildfire systype	*/
-#define ST_DEC_CUSCO		 36	/* CUSCO systype	*/
-#define ST_DEC_EIGER		 37	/* Eiger systype	*/
-#define ST_DEC_TITAN		 38	/* Titan systype	*/
-#define ST_DEC_MARVEL		 39	/* Marvel systype	*/
-
-/* UNOFFICIAL!!! */
-#define ST_UNOFFICIAL_BIAS	100
-#define ST_DTI_RUFFIAN		101	/* RUFFIAN systype	*/
-
-/* Alpha Processor, Inc. systems */
-#define ST_API_BIAS		200
-#define ST_API_NAUTILUS		201	/* UP1000 systype	*/
-
-struct pcb_struct {
-	unsigned long ksp;
-	unsigned long usp;
-	unsigned long ptbr;
-	unsigned int pcc;
-	unsigned int asn;
-	unsigned long unique;
-	unsigned long flags;
-	unsigned long res1, res2;
-};
-
-struct percpu_struct {
-	unsigned long hwpcb[16];
-	unsigned long flags;
-	unsigned long pal_mem_size;
-	unsigned long pal_scratch_size;
-	unsigned long pal_mem_pa;
-	unsigned long pal_scratch_pa;
-	unsigned long pal_revision;
-	unsigned long type;
-	unsigned long variation;
-	unsigned long revision;
-	unsigned long serial_no[2];
-	unsigned long logout_area_pa;
-	unsigned long logout_area_len;
-	unsigned long halt_PCBB;
-	unsigned long halt_PC;
-	unsigned long halt_PS;
-	unsigned long halt_arg;
-	unsigned long halt_ra;
-	unsigned long halt_pv;
-	unsigned long halt_reason;
-	unsigned long res;
-	unsigned long ipc_buffer[21];
-	unsigned long palcode_avail[16];
-	unsigned long compatibility;
-	unsigned long console_data_log_pa;
-	unsigned long console_data_log_length;
-	unsigned long bcache_info;
-};
-
-struct procdesc_struct {
-	unsigned long weird_vms_stuff;
-	unsigned long address;
-};
-
-struct vf_map_struct {
-	unsigned long va;
-	unsigned long pa;
-	unsigned long count;
-};
-
-struct crb_struct {
-	struct procdesc_struct * dispatch_va;
-	struct procdesc_struct * dispatch_pa;
-	struct procdesc_struct * fixup_va;
-	struct procdesc_struct * fixup_pa;
-	/* virtual->physical map */
-	unsigned long map_entries;
-	unsigned long map_pages;
-	struct vf_map_struct map[1];
-};
-
-struct memclust_struct {
-	unsigned long start_pfn;
-	unsigned long numpages;
-	unsigned long numtested;
-	unsigned long bitmap_va;
-	unsigned long bitmap_pa;
-	unsigned long bitmap_chksum;
-	unsigned long usage;
-};
-
-struct memdesc_struct {
-	unsigned long chksum;
-	unsigned long optional_pa;
-	unsigned long numclusters;
-	struct memclust_struct cluster[0];
-};
-
-struct dsr_struct {
-	long smm;			/* SMM nubber used by LMF       */
-	unsigned long  lurt_off;	/* offset to LURT table         */
-	unsigned long  sysname_off;	/* offset to sysname char count */
-};
-
-struct hwrpb_struct {
-	unsigned long phys_addr;	/* check: physical address of the hwrpb */
-	unsigned long id;		/* check: "HWRPB\0\0\0" */
-	unsigned long revision;	
-	unsigned long size;		/* size of hwrpb */
-	unsigned long cpuid;
-	unsigned long pagesize;		/* 8192, I hope */
-	unsigned long pa_bits;		/* number of physical address bits */
-	unsigned long max_asn;
-	unsigned char ssn[16];		/* system serial number: big bother is watching */
-	unsigned long sys_type;
-	unsigned long sys_variation;
-	unsigned long sys_revision;
-	unsigned long intr_freq;	/* interval clock frequency * 4096 */
-	unsigned long cycle_freq;	/* cycle counter frequency */
-	unsigned long vptb;		/* Virtual Page Table Base address */
-	unsigned long res1;
-	unsigned long tbhb_offset;	/* Translation Buffer Hint Block */
-	unsigned long nr_processors;
-	unsigned long processor_size;
-	unsigned long processor_offset;
-	unsigned long ctb_nr;
-	unsigned long ctb_size;		/* console terminal block size */
-	unsigned long ctbt_offset;	/* console terminal block table offset */
-	unsigned long crb_offset;	/* console callback routine block */
-	unsigned long mddt_offset;	/* memory data descriptor table */
-	unsigned long cdb_offset;	/* configuration data block (or NULL) */
-	unsigned long frut_offset;	/* FRU table (or NULL) */
-	void (*save_terminal)(unsigned long);
-	unsigned long save_terminal_data;
-	void (*restore_terminal)(unsigned long);
-	unsigned long restore_terminal_data;
-	void (*CPU_restart)(unsigned long);
-	unsigned long CPU_restart_data;
-	unsigned long res2;
-	unsigned long res3;
-	unsigned long chksum;
-	unsigned long rxrdy;
-	unsigned long txrdy;
-	unsigned long dsr_offset;	/* "Dynamic System Recognition Data Block Table" */
-};
-
-#ifdef __KERNEL__
-
-extern struct hwrpb_struct *hwrpb;
-
-static inline void
-hwrpb_update_checksum(struct hwrpb_struct *h)
-{
-	unsigned long sum = 0, *l;
-        for (l = (unsigned long *) h; l < (unsigned long *) &h->chksum; ++l)
-                sum += *l;
-        h->chksum = sum;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_HWRPB_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/io.h b/ANDROID_3.4.5/arch/alpha/include/asm/io.h
deleted file mode 100644
index 7a3d38d5..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/io.h
+++ /dev/null
@@ -1,575 +0,0 @@
-#ifndef __ALPHA_IO_H
-#define __ALPHA_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/compiler.h>
-#include <asm/pgtable.h>
-#include <asm/machvec.h>
-#include <asm/hwrpb.h>
-
-/* The generic header contains only prototypes.  Including it ensures that
-   the implementation we have here matches that interface.  */
-#include <asm-generic/iomap.h>
-
-/* We don't use IO slowdowns on the Alpha, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
-/*
- * Virtual -> physical identity mapping starts at this offset
- */
-#ifdef USE_48_BIT_KSEG
-#define IDENT_ADDR     0xffff800000000000UL
-#else
-#define IDENT_ADDR     0xfffffc0000000000UL
-#endif
-
-/*
- * We try to avoid hae updates (thus the cache), but when we
- * do need to update the hae, we need to do it atomically, so
- * that any interrupts wouldn't get confused with the hae
- * register not being up-to-date with respect to the hardware
- * value.
- */
-extern inline void __set_hae(unsigned long new_hae)
-{
-	unsigned long flags = swpipl(IPL_MAX);
-
-	barrier();
-
-	alpha_mv.hae_cache = new_hae;
-	*alpha_mv.hae_register = new_hae;
-	mb();
-	/* Re-read to make sure it was written.  */
-	new_hae = *alpha_mv.hae_register;
-
-	setipl(flags);
-	barrier();
-}
-
-extern inline void set_hae(unsigned long new_hae)
-{
-	if (new_hae != alpha_mv.hae_cache)
-		__set_hae(new_hae);
-}
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-#ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
-{
-	return (unsigned long)address - IDENT_ADDR;
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
-	return (void *) (address + IDENT_ADDR);
-}
-#else
-static inline unsigned long virt_to_phys(void *address)
-{
-        unsigned long phys = (unsigned long)address;
-
-	/* Sign-extend from bit 41.  */
-	phys <<= (64 - 41);
-	phys = (long)phys >> (64 - 41);
-
-	/* Crop to the physical address width of the processor.  */
-        phys &= (1ul << hwrpb->pa_bits) - 1;
-
-        return phys;
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
-        return (void *)(IDENT_ADDR + (address & ((1ul << 41) - 1)));
-}
-#endif
-
-#define page_to_phys(page)	page_to_pa(page)
-
-static inline dma_addr_t __deprecated isa_page_to_bus(struct page *page)
-{
-	return page_to_phys(page);
-}
-
-/* Maximum PIO space address supported?  */
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * Change addresses as seen by the kernel (virtual) to addresses as
- * seen by a device (bus), and vice versa.
- *
- * Note that this only works for a limited range of kernel addresses,
- * and very well may not span all memory.  Consider this interface 
- * deprecated in favour of the DMA-mapping API.
- */
-extern unsigned long __direct_map_base;
-extern unsigned long __direct_map_size;
-
-static inline unsigned long __deprecated virt_to_bus(void *address)
-{
-	unsigned long phys = virt_to_phys(address);
-	unsigned long bus = phys + __direct_map_base;
-	return phys <= __direct_map_size ? bus : 0;
-}
-#define isa_virt_to_bus virt_to_bus
-
-static inline void * __deprecated bus_to_virt(unsigned long address)
-{
-	void *virt;
-
-	/* This check is a sanity check but also ensures that bus address 0
-	   maps to virtual address 0 which is useful to detect null pointers
-	   (the NCR driver is much simpler if NULL pointers are preserved).  */
-	address -= __direct_map_base;
-	virt = phys_to_virt(address);
-	return (long)address <= 0 ? NULL : virt;
-}
-#define isa_bus_to_virt bus_to_virt
-
-/*
- * There are different chipsets to interface the Alpha CPUs to the world.
- */
-
-#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
-#define _IO_CONCAT(a,b)	a ## _ ## b
-
-#ifdef CONFIG_ALPHA_GENERIC
-
-/* In a generic kernel, we always go through the machine vector.  */
-
-#define REMAP1(TYPE, NAME, QUAL)					\
-static inline TYPE generic_##NAME(QUAL void __iomem *addr)		\
-{									\
-	return alpha_mv.mv_##NAME(addr);				\
-}
-
-#define REMAP2(TYPE, NAME, QUAL)					\
-static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
-{									\
-	alpha_mv.mv_##NAME(b, addr);					\
-}
-
-REMAP1(unsigned int, ioread8, /**/)
-REMAP1(unsigned int, ioread16, /**/)
-REMAP1(unsigned int, ioread32, /**/)
-REMAP1(u8, readb, const volatile)
-REMAP1(u16, readw, const volatile)
-REMAP1(u32, readl, const volatile)
-REMAP1(u64, readq, const volatile)
-
-REMAP2(u8, iowrite8, /**/)
-REMAP2(u16, iowrite16, /**/)
-REMAP2(u32, iowrite32, /**/)
-REMAP2(u8, writeb, volatile)
-REMAP2(u16, writew, volatile)
-REMAP2(u32, writel, volatile)
-REMAP2(u64, writeq, volatile)
-
-#undef REMAP1
-#undef REMAP2
-
-extern inline void __iomem *generic_ioportmap(unsigned long a)
-{
-	return alpha_mv.mv_ioportmap(a);
-}
-
-static inline void __iomem *generic_ioremap(unsigned long a, unsigned long s)
-{
-	return alpha_mv.mv_ioremap(a, s);
-}
-
-static inline void generic_iounmap(volatile void __iomem *a)
-{
-	return alpha_mv.mv_iounmap(a);
-}
-
-static inline int generic_is_ioaddr(unsigned long a)
-{
-	return alpha_mv.mv_is_ioaddr(a);
-}
-
-static inline int generic_is_mmio(const volatile void __iomem *a)
-{
-	return alpha_mv.mv_is_mmio(a);
-}
-
-#define __IO_PREFIX		generic
-#define generic_trivial_rw_bw	0
-#define generic_trivial_rw_lq	0
-#define generic_trivial_io_bw	0
-#define generic_trivial_io_lq	0
-#define generic_trivial_iounmap	0
-
-#else
-
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
-# include <asm/core_cia.h>
-#elif defined(CONFIG_ALPHA_IRONGATE)
-# include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_JENSEN)
-# include <asm/jensen.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
-#elif defined(CONFIG_ALPHA_MARVEL)
-# include <asm/core_marvel.h>
-#elif defined(CONFIG_ALPHA_MCPCIA)
-# include <asm/core_mcpcia.h>
-#elif defined(CONFIG_ALPHA_POLARIS)
-# include <asm/core_polaris.h>
-#elif defined(CONFIG_ALPHA_T2)
-# include <asm/core_t2.h>
-#elif defined(CONFIG_ALPHA_TSUNAMI)
-# include <asm/core_tsunami.h>
-#elif defined(CONFIG_ALPHA_TITAN)
-# include <asm/core_titan.h>
-#elif defined(CONFIG_ALPHA_WILDFIRE)
-# include <asm/core_wildfire.h>
-#else
-#error "What system is this?"
-#endif
-
-#endif /* GENERIC */
-
-/*
- * We always have external versions of these routines.
- */
-extern u8		inb(unsigned long port);
-extern u16		inw(unsigned long port);
-extern u32		inl(unsigned long port);
-extern void		outb(u8 b, unsigned long port);
-extern void		outw(u16 b, unsigned long port);
-extern void		outl(u32 b, unsigned long port);
-
-extern u8		readb(const volatile void __iomem *addr);
-extern u16		readw(const volatile void __iomem *addr);
-extern u32		readl(const volatile void __iomem *addr);
-extern u64		readq(const volatile void __iomem *addr);
-extern void		writeb(u8 b, volatile void __iomem *addr);
-extern void		writew(u16 b, volatile void __iomem *addr);
-extern void		writel(u32 b, volatile void __iomem *addr);
-extern void		writeq(u64 b, volatile void __iomem *addr);
-
-extern u8		__raw_readb(const volatile void __iomem *addr);
-extern u16		__raw_readw(const volatile void __iomem *addr);
-extern u32		__raw_readl(const volatile void __iomem *addr);
-extern u64		__raw_readq(const volatile void __iomem *addr);
-extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
-extern void		__raw_writew(u16 b, volatile void __iomem *addr);
-extern void		__raw_writel(u32 b, volatile void __iomem *addr);
-extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
-
-/*
- * Mapping from port numbers to __iomem space is pretty easy.
- */
-
-/* These two have to be extern inline because of the extern prototype from
-   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
-   the same declaration.  */
-extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
-{
-	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
-}
-
-extern inline void ioport_unmap(void __iomem *addr)
-{
-}
-
-static inline void __iomem *ioremap(unsigned long port, unsigned long size)
-{
-	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
-}
-
-static inline void __iomem *__ioremap(unsigned long port, unsigned long size,
-				      unsigned long flags)
-{
-	return ioremap(port, size);
-}
-
-static inline void __iomem * ioremap_nocache(unsigned long offset,
-					     unsigned long size)
-{
-	return ioremap(offset, size);
-} 
-
-static inline void iounmap(volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iounmap)(addr);
-}
-
-static inline int __is_ioaddr(unsigned long addr)
-{
-	return IO_CONCAT(__IO_PREFIX,is_ioaddr)(addr);
-}
-#define __is_ioaddr(a)		__is_ioaddr((unsigned long)(a))
-
-static inline int __is_mmio(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,is_mmio)(addr);
-}
-
-
-/*
- * If the actual I/O bits are sufficiently trivial, then expand inline.
- */
-
-#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-extern inline unsigned int ioread8(void __iomem *addr)
-{
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
-	mb();
-	return ret;
-}
-
-extern inline unsigned int ioread16(void __iomem *addr)
-{
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
-	mb();
-	return ret;
-}
-
-extern inline void iowrite8(u8 b, void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
-	mb();
-}
-
-extern inline void iowrite16(u16 b, void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
-	mb();
-}
-
-extern inline u8 inb(unsigned long port)
-{
-	return ioread8(ioport_map(port, 1));
-}
-
-extern inline u16 inw(unsigned long port)
-{
-	return ioread16(ioport_map(port, 2));
-}
-
-extern inline void outb(u8 b, unsigned long port)
-{
-	iowrite8(b, ioport_map(port, 1));
-}
-
-extern inline void outw(u16 b, unsigned long port)
-{
-	iowrite16(b, ioport_map(port, 2));
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-extern inline unsigned int ioread32(void __iomem *addr)
-{
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
-	mb();
-	return ret;
-}
-
-extern inline void iowrite32(u32 b, void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
-	mb();
-}
-
-extern inline u32 inl(unsigned long port)
-{
-	return ioread32(ioport_map(port, 4));
-}
-
-extern inline void outl(u32 b, unsigned long port)
-{
-	iowrite32(b, ioport_map(port, 4));
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
-extern inline u8 __raw_readb(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readb)(addr);
-}
-
-extern inline u16 __raw_readw(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readw)(addr);
-}
-
-extern inline void __raw_writeb(u8 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writeb)(b, addr);
-}
-
-extern inline void __raw_writew(u16 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writew)(b, addr);
-}
-
-extern inline u8 readb(const volatile void __iomem *addr)
-{
-	u8 ret = __raw_readb(addr);
-	mb();
-	return ret;
-}
-
-extern inline u16 readw(const volatile void __iomem *addr)
-{
-	u16 ret = __raw_readw(addr);
-	mb();
-	return ret;
-}
-
-extern inline void writeb(u8 b, volatile void __iomem *addr)
-{
-	__raw_writeb(b, addr);
-	mb();
-}
-
-extern inline void writew(u16 b, volatile void __iomem *addr)
-{
-	__raw_writew(b, addr);
-	mb();
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1
-extern inline u32 __raw_readl(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readl)(addr);
-}
-
-extern inline u64 __raw_readq(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readq)(addr);
-}
-
-extern inline void __raw_writel(u32 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writel)(b, addr);
-}
-
-extern inline void __raw_writeq(u64 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writeq)(b, addr);
-}
-
-extern inline u32 readl(const volatile void __iomem *addr)
-{
-	u32 ret = __raw_readl(addr);
-	mb();
-	return ret;
-}
-
-extern inline u64 readq(const volatile void __iomem *addr)
-{
-	u64 ret = __raw_readq(addr);
-	mb();
-	return ret;
-}
-
-extern inline void writel(u32 b, volatile void __iomem *addr)
-{
-	__raw_writel(b, addr);
-	mb();
-}
-
-extern inline void writeq(u64 b, volatile void __iomem *addr)
-{
-	__raw_writeq(b, addr);
-	mb();
-}
-#endif
-
-#define inb_p		inb
-#define inw_p		inw
-#define inl_p		inl
-#define outb_p		outb
-#define outw_p		outw
-#define outl_p		outl
-#define readb_relaxed(addr) __raw_readb(addr)
-#define readw_relaxed(addr) __raw_readw(addr)
-#define readl_relaxed(addr) __raw_readl(addr)
-#define readq_relaxed(addr) __raw_readq(addr)
-
-#define mmiowb()
-
-/*
- * String version of IO memory access ops:
- */
-extern void memcpy_fromio(void *, const volatile void __iomem *, long);
-extern void memcpy_toio(volatile void __iomem *, const void *, long);
-extern void _memset_c_io(volatile void __iomem *, unsigned long, long);
-
-static inline void memset_io(volatile void __iomem *addr, u8 c, long len)
-{
-	_memset_c_io(addr, 0x0101010101010101UL * c, len);
-}
-
-#define __HAVE_ARCH_MEMSETW_IO
-static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
-{
-	_memset_c_io(addr, 0x0001000100010001UL * c, len);
-}
-
-/*
- * String versions of in/out ops:
- */
-extern void insb (unsigned long port, void *dst, unsigned long count);
-extern void insw (unsigned long port, void *dst, unsigned long count);
-extern void insl (unsigned long port, void *dst, unsigned long count);
-extern void outsb (unsigned long port, const void *src, unsigned long count);
-extern void outsw (unsigned long port, const void *src, unsigned long count);
-extern void outsl (unsigned long port, const void *src, unsigned long count);
-
-/*
- * The Alpha Jensen hardware for some rather strange reason puts
- * the RTC clock at 0x170 instead of 0x70. Probably due to some
- * misguided idea about using 0x70 for NMI stuff.
- *
- * These defines will override the defaults when doing RTC queries
- */
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
-#else
-# ifdef CONFIG_ALPHA_JENSEN
-#  define RTC_PORT(x)	(0x170+(x))
-# else
-#  define RTC_PORT(x)	(0x70 + (x))
-# endif
-#endif
-#define RTC_ALWAYS_BCD	0
-
-/*
- * Some mucking forons use if[n]def writeq to check if platform has it.
- * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
- * to play with; for now just use cpp anti-recursion logics and make sure
- * that damn thing is defined and expands to itself.
- */
-
-#define writeq writeq
-#define readq readq
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_IO_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/io_trivial.h b/ANDROID_3.4.5/arch/alpha/include/asm/io_trivial.h
deleted file mode 100644
index 1c77f10b..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/io_trivial.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* Trivial implementations of basic i/o routines.  Assumes that all
-   of the hard work has been done by ioremap and ioportmap, and that
-   access to i/o space is linear.  */
-
-/* This file may be included multiple times.  */
-
-#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-__EXTERN_INLINE unsigned int
-IO_CONCAT(__IO_PREFIX,ioread8)(void __iomem *a)
-{
-	return __kernel_ldbu(*(volatile u8 __force *)a);
-}
-
-__EXTERN_INLINE unsigned int
-IO_CONCAT(__IO_PREFIX,ioread16)(void __iomem *a)
-{
-	return __kernel_ldwu(*(volatile u16 __force *)a);
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,iowrite8)(u8 b, void __iomem *a)
-{
-	__kernel_stb(b, *(volatile u8 __force *)a);
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
-{
-	__kernel_stw(b, *(volatile u16 __force *)a);
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-__EXTERN_INLINE unsigned int
-IO_CONCAT(__IO_PREFIX,ioread32)(void __iomem *a)
-{
-	return *(volatile u32 __force *)a;
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
-{
-	*(volatile u32 __force *)a = b;
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
-__EXTERN_INLINE u8
-IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
-{
-	return __kernel_ldbu(*(const volatile u8 __force *)a);
-}
-
-__EXTERN_INLINE u16
-IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
-{
-	return __kernel_ldwu(*(const volatile u16 __force *)a);
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
-{
-	__kernel_stb(b, *(volatile u8 __force *)a);
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
-{
-	__kernel_stw(b, *(volatile u16 __force *)a);
-}
-#elif IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 2
-__EXTERN_INLINE u8
-IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
-{
-	void __iomem *addr = (void __iomem *)a;
-	return IO_CONCAT(__IO_PREFIX,ioread8)(addr);
-}
-
-__EXTERN_INLINE u16
-IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
-{
-	void __iomem *addr = (void __iomem *)a;
-	return IO_CONCAT(__IO_PREFIX,ioread16)(addr);
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
-{
-	void __iomem *addr = (void __iomem *)a;
-	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
-{
-	void __iomem *addr = (void __iomem *)a;
-	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1
-__EXTERN_INLINE u32
-IO_CONCAT(__IO_PREFIX,readl)(const volatile void __iomem *a)
-{
-	return *(const volatile u32 __force *)a;
-}
-
-__EXTERN_INLINE u64
-IO_CONCAT(__IO_PREFIX,readq)(const volatile void __iomem *a)
-{
-	return *(const volatile u64 __force *)a;
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,writel)(u32 b, volatile void __iomem *a)
-{
-	*(volatile u32 __force *)a = b;
-}
-
-__EXTERN_INLINE void
-IO_CONCAT(__IO_PREFIX,writeq)(u64 b, volatile void __iomem *a)
-{
-	*(volatile u64 __force *)a = b;
-}
-#endif
-
-#if IO_CONCAT(__IO_PREFIX,trivial_iounmap)
-__EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,iounmap)(volatile void __iomem *a)
-{
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/ioctl.h b/ANDROID_3.4.5/arch/alpha/include/asm/ioctl.h
deleted file mode 100644
index fc63727f..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/ioctl.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _ALPHA_IOCTL_H
-#define _ALPHA_IOCTL_H
-
-/*
- * The original linux ioctl numbering scheme was just a general
- * "anything goes" setup, where more or less random numbers were
- * assigned.  Sorry, I was clueless when I started out on this.
- *
- * On the alpha, we'll try to clean it up a bit, using a more sane
- * ioctl numbering, and also trying to be compatible with OSF/1 in
- * the process. I'd like to clean it up for the i386 as well, but
- * it's so painful recognizing both the new and the old numbers..
- */
-
-#define _IOC_NRBITS	8
-#define _IOC_TYPEBITS	8
-#define _IOC_SIZEBITS	13
-#define _IOC_DIRBITS	3
-
-#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
-#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT	0
-#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
-#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
-#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
-
-/*
- * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
- * And this turns out useful to catch old ioctl numbers in header
- * files for us.
- */
-#define _IOC_NONE	1U
-#define _IOC_READ	2U
-#define _IOC_WRITE	4U
-
-#define _IOC(dir,type,nr,size)			\
-	((unsigned int)				\
-	 (((dir)  << _IOC_DIRSHIFT) |		\
-	  ((type) << _IOC_TYPESHIFT) |		\
-	  ((nr)   << _IOC_NRSHIFT) |		\
-	  ((size) << _IOC_SIZESHIFT)))
-
-/* used to create numbers */
-#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* used to decode them.. */
-#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
-#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
-
-/* ...and for the drivers/sound files... */
-
-#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
-
-#endif /* _ALPHA_IOCTL_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/ioctls.h b/ANDROID_3.4.5/arch/alpha/include/asm/ioctls.h
deleted file mode 100644
index 80e1cee9..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/ioctls.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef _ASM_ALPHA_IOCTLS_H
-#define _ASM_ALPHA_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX		_IO('f', 1)
-#define FIONCLEX	_IO('f', 2)
-#define FIOASYNC	_IOW('f', 125, int)
-#define FIONBIO		_IOW('f', 126, int)
-#define FIONREAD	_IOR('f', 127, int)
-#define TIOCINQ		FIONREAD
-#define FIOQSIZE	_IOR('f', 128, loff_t)
-
-#define TIOCGETP	_IOR('t', 8, struct sgttyb)
-#define TIOCSETP	_IOW('t', 9, struct sgttyb)
-#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
-
-#define TIOCSETC	_IOW('t', 17, struct tchars)
-#define TIOCGETC	_IOR('t', 18, struct tchars)
-#define TCGETS		_IOR('t', 19, struct termios)
-#define TCSETS		_IOW('t', 20, struct termios)
-#define TCSETSW		_IOW('t', 21, struct termios)
-#define TCSETSF		_IOW('t', 22, struct termios)
-
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
-
-#define TCSBRK		_IO('t', 29)
-#define TCXONC		_IO('t', 30)
-#define TCFLSH		_IO('t', 31)
-
-#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
-#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
-#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
-#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
-#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
-
-#define TIOCGLTC	_IOR('t', 116, struct ltchars)
-#define TIOCSLTC	_IOW('t', 117, struct ltchars)
-#define TIOCSPGRP	_IOW('t', 118, int)
-#define TIOCGPGRP	_IOR('t', 119, int)
-
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-
-#define TIOCSTI		0x5412
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-# define TIOCM_LE	0x001
-# define TIOCM_DTR	0x002
-# define TIOCM_RTS	0x004
-# define TIOCM_ST	0x008
-# define TIOCM_SR	0x010
-# define TIOCM_CTS	0x020
-# define TIOCM_CAR	0x040
-# define TIOCM_RNG	0x080
-# define TIOCM_DSR	0x100
-# define TIOCM_CD	TIOCM_CAR
-# define TIOCM_RI	TIOCM_RNG
-# define TIOCM_OUT1	0x2000
-# define TIOCM_OUT2	0x4000
-# define TIOCM_LOOP	0x8000
-
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-# define TIOCPKT_DATA		 0
-# define TIOCPKT_FLUSHREAD	 1
-# define TIOCPKT_FLUSHWRITE	 2
-# define TIOCPKT_STOP		 4
-# define TIOCPKT_START		 8
-# define TIOCPKT_NOSTOP		16
-# define TIOCPKT_DOSTOP		32
-# define TIOCPKT_IOCTL		64
-
-
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-#define TIOCVHANGUP	0x5437
-
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-
-#endif /* _ASM_ALPHA_IOCTLS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/ipcbuf.h b/ANDROID_3.4.5/arch/alpha/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51c..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/irq.h b/ANDROID_3.4.5/arch/alpha/include/asm/irq.h
deleted file mode 100644
index 06377400..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/irq.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef _ALPHA_IRQ_H
-#define _ALPHA_IRQ_H
-
-/*
- *	linux/include/alpha/irq.h
- *
- *	(C) 1994 Linus Torvalds
- */
-
-#include <linux/linkage.h>
-
-#if   defined(CONFIG_ALPHA_GENERIC)
-
-/* Here NR_IRQS is not exact, but rather an upper bound.  This is used
-   many places throughout the kernel to size static arrays.  That's ok,
-   we'll use alpha_mv.nr_irqs when we want the real thing.  */
-
-/* When LEGACY_START_ADDRESS is selected, we leave out:
-     TITAN
-     WILDFIRE
-     MARVEL
-
-   This helps keep the kernel object size reasonable for the majority
-   of machines.
-*/
-
-# if defined(CONFIG_ALPHA_LEGACY_START_ADDRESS)
-#  define NR_IRQS      (128)           /* max is RAWHIDE/TAKARA */
-# else
-#  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
-# endif
-
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
-      defined(CONFIG_ALPHA_EB66P)     || \
-      defined(CONFIG_ALPHA_EB164)     || \
-      defined(CONFIG_ALPHA_PC164)     || \
-      defined(CONFIG_ALPHA_LX164)
-# define NR_IRQS	35
-
-#elif defined(CONFIG_ALPHA_EB66)      || \
-      defined(CONFIG_ALPHA_EB64P)     || \
-      defined(CONFIG_ALPHA_MIKASA)
-# define NR_IRQS	32
-
-#elif defined(CONFIG_ALPHA_ALCOR)     || \
-      defined(CONFIG_ALPHA_MIATA)     || \
-      defined(CONFIG_ALPHA_RUFFIAN)   || \
-      defined(CONFIG_ALPHA_RX164)     || \
-      defined(CONFIG_ALPHA_NORITAKE)
-# define NR_IRQS	48
-
-#elif defined(CONFIG_ALPHA_SABLE)     || \
-      defined(CONFIG_ALPHA_SX164)
-# define NR_IRQS	40
-
-#elif defined(CONFIG_ALPHA_DP264) || \
-      defined(CONFIG_ALPHA_LYNX)  || \
-      defined(CONFIG_ALPHA_SHARK) || \
-      defined(CONFIG_ALPHA_EIGER)
-# define NR_IRQS	64
-
-#elif defined(CONFIG_ALPHA_TITAN)
-#define NR_IRQS		80
-
-#elif defined(CONFIG_ALPHA_RAWHIDE) || \
-	defined(CONFIG_ALPHA_TAKARA)
-# define NR_IRQS	128
-
-#elif defined(CONFIG_ALPHA_WILDFIRE)
-# define NR_IRQS	2048 /* enuff for 8 QBBs */
-
-#elif defined(CONFIG_ALPHA_MARVEL)
-# define NR_IRQS	(32768 + 16) 	/* marvel - 32 pids*/
-
-#else /* everyone else */
-# define NR_IRQS	16
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	/*
-	 * XXX is this true for all Alpha's?  The old serial driver
-	 * did it this way for years without any complaints, so....
-	 */
-	return ((irq == 2) ? 9 : irq);
-}
-
-struct pt_regs;
-extern void (*perf_irq)(unsigned long, struct pt_regs *);
-
-#endif /* _ALPHA_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/irq_regs.h b/ANDROID_3.4.5/arch/alpha/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b7..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/irqflags.h b/ANDROID_3.4.5/arch/alpha/include/asm/irqflags.h
deleted file mode 100644
index ffb17264..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/irqflags.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __ALPHA_IRQFLAGS_H
-#define __ALPHA_IRQFLAGS_H
-
-#include <asm/pal.h>
-
-#define IPL_MIN		0
-#define IPL_SW0		1
-#define IPL_SW1		2
-#define IPL_DEV0	3
-#define IPL_DEV1	4
-#define IPL_TIMER	5
-#define IPL_PERF	6
-#define IPL_POWERFAIL	6
-#define IPL_MCHECK	7
-#define IPL_MAX		7
-
-#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
-#undef IPL_MIN
-#define IPL_MIN		__min_ipl
-extern int __min_ipl;
-#endif
-
-#define getipl()		(rdps() & 7)
-#define setipl(ipl)		((void) swpipl(ipl))
-
-static inline unsigned long arch_local_save_flags(void)
-{
-	return rdps();
-}
-
-static inline void arch_local_irq_disable(void)
-{
-	setipl(IPL_MAX);
-	barrier();
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags = swpipl(IPL_MAX);
-	barrier();
-	return flags;
-}
-
-static inline void arch_local_irq_enable(void)
-{
-	barrier();
-	setipl(IPL_MIN);
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	barrier();
-	setipl(flags);
-	barrier();
-}
-
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
-{
-	return flags == IPL_MAX;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
-	return arch_irqs_disabled_flags(getipl());
-}
-
-#endif /* __ALPHA_IRQFLAGS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/jensen.h b/ANDROID_3.4.5/arch/alpha/include/asm/jensen.h
deleted file mode 100644
index 964b06ea..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/jensen.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out.  Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area.  Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address.  This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS	EISA_HAE
-#define JENSEN_HAE_MASK		0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
-	/* hae on the Jensen is bits 31:25 shifted right */
-	addr >>= 25;
-	if (addr != alpha_mv.hae_cache)
-		set_hae(addr);
-}
-
-#define vuip	volatile unsigned int *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC,  printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-static inline unsigned int jensen_local_inb(unsigned long addr)
-{
-	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-static inline void jensen_local_outb(u8 b, unsigned long addr)
-{
-	*(vuip)((addr << 9) + EISA_VL82C106) = b;
-	mb();
-}
-
-static inline unsigned int jensen_bus_inb(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-static inline void jensen_bus_outb(u8 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
-	mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */	(addr == 0x60 || addr == 0x64) || \
-/* RTC */	(addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		return jensen_local_inb(addr);
-	else
-		return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		jensen_local_outb(b, addr);
-	else
-		jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
-	jensen_set_hae(0);
-	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
-	mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
-	mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
-	result >>= (addr & 3) * 8;
-	return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long r0, r1;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	r0 = *(vuip) (addr);
-	r1 = *(vuip) (addr + (4 << 7));
-	return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	*(vuip) (addr) = b;
-	*(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
-					     unsigned long size)
-{
-	return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
-	return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface.  All the routines are so ugly for Jensen
-   that it doesn't make sense to merge them.  */
-
-#define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		return jensen_read##OS(xaddr - 0x100000000ul);		\
-	else								\
-		return jensen_in##OS((unsigned long)xaddr);		\
-}									\
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		jensen_write##OS(b, xaddr - 0x100000000ul);		\
-	else								\
-		jensen_out##OS(b, (unsigned long)xaddr);		\
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-
-#undef IOPORT
-
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		jensen
-#define jensen_trivial_rw_bw	0
-#define jensen_trivial_rw_lq	0
-#define jensen_trivial_io_bw	0
-#define jensen_trivial_io_lq	0
-#define jensen_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/kdebug.h b/ANDROID_3.4.5/arch/alpha/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b03..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/kmap_types.h b/ANDROID_3.4.5/arch/alpha/include/asm/kmap_types.h
deleted file mode 100644
index a8d4ec8e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/kmap_types.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-/* Dummy header just to define km_type. */
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-#define  __WITH_KM_FENCE
-#endif
-
-#include <asm-generic/kmap_types.h>
-
-#undef __WITH_KM_FENCE
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/linkage.h b/ANDROID_3.4.5/arch/alpha/include/asm/linkage.h
deleted file mode 100644
index 291c2d01..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/local.h b/ANDROID_3.4.5/arch/alpha/include/asm/local.h
deleted file mode 100644
index 9c94b845..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/local.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef _ALPHA_LOCAL_H
-#define _ALPHA_LOCAL_H
-
-#include <linux/percpu.h>
-#include <linux/atomic.h>
-
-typedef struct
-{
-	atomic_long_t a;
-} local_t;
-
-#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
-#define local_read(l)	atomic_long_read(&(l)->a)
-#define local_set(l,i)	atomic_long_set(&(l)->a, (i))
-#define local_inc(l)	atomic_long_inc(&(l)->a)
-#define local_dec(l)	atomic_long_dec(&(l)->a)
-#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
-#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
-
-static __inline__ long local_add_return(long i, local_t * l)
-{
-	long temp, result;
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%1\n"
-	"	addq %0,%3,%2\n"
-	"	addq %0,%3,%0\n"
-	"	stq_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (l->a.counter), "=&r" (result)
-	:"Ir" (i), "m" (l->a.counter) : "memory");
-	return result;
-}
-
-static __inline__ long local_sub_return(long i, local_t * l)
-{
-	long temp, result;
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%1\n"
-	"	subq %0,%3,%2\n"
-	"	subq %0,%3,%0\n"
-	"	stq_c %0,%1\n"
-	"	beq %0,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (l->a.counter), "=&r" (result)
-	:"Ir" (i), "m" (l->a.counter) : "memory");
-	return result;
-}
-
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
-#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
-
-/**
- * local_add_unless - add unless the number is a given value
- * @l: pointer of type local_t
- * @a: the amount to add to l...
- * @u: ...unless l is equal to u.
- *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
- */
-#define local_add_unless(l, a, u)				\
-({								\
-	long c, old;						\
-	c = local_read(l);					\
-	for (;;) {						\
-		if (unlikely(c == (u)))				\
-			break;					\
-		old = local_cmpxchg((l), c, c + (a));	\
-		if (likely(old == c))				\
-			break;					\
-		c = old;					\
-	}							\
-	c != (u);						\
-})
-#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
-
-#define local_add_negative(a, l) (local_add_return((a), (l)) < 0)
-
-#define local_dec_return(l) local_sub_return(1,(l))
-
-#define local_inc_return(l) local_add_return(1,(l))
-
-#define local_sub_and_test(i,l) (local_sub_return((i), (l)) == 0)
-
-#define local_inc_and_test(l) (local_add_return(1, (l)) == 0)
-
-#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0)
-
-/* Verify if faster than atomic ops */
-#define __local_inc(l)		((l)->a.counter++)
-#define __local_dec(l)		((l)->a.counter++)
-#define __local_add(i,l)	((l)->a.counter+=(i))
-#define __local_sub(i,l)	((l)->a.counter-=(i))
-
-#endif /* _ALPHA_LOCAL_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/local64.h b/ANDROID_3.4.5/arch/alpha/include/asm/local64.h
deleted file mode 100644
index 36c93b5c..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/machvec.h b/ANDROID_3.4.5/arch/alpha/include/asm/machvec.h
deleted file mode 100644
index 72dbf235..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/machvec.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ALPHA_MACHVEC_H
-#define __ALPHA_MACHVEC_H 1
-
-#include <linux/types.h>
-
-/*
- *	This file gets pulled in by asm/io.h from user space. We don't
- *	want most of this escaping.
- */
- 
-#ifdef __KERNEL__
-
-/* The following structure vectors all of the I/O and IRQ manipulation
-   from the generic kernel to the hardware specific backend.  */
-
-struct task_struct;
-struct mm_struct;
-struct vm_area_struct;
-struct linux_hose_info;
-struct pci_dev;
-struct pci_ops;
-struct pci_controller;
-struct _alpha_agp_info;
-struct rtc_time;
-
-struct alpha_machine_vector
-{
-	/* This "belongs" down below with the rest of the runtime
-	   variables, but it is convenient for entry.S if these 
-	   two slots are at the beginning of the struct.  */
-	unsigned long hae_cache;
-	unsigned long *hae_register;
-
-	int nr_irqs;
-	int rtc_port;
-	unsigned int max_asn;
-	unsigned long max_isa_dma_address;
-	unsigned long irq_probe_mask;
-	unsigned long iack_sc;
-	unsigned long min_io_address;
-	unsigned long min_mem_address;
-	unsigned long pci_dac_offset;
-
-	void (*mv_pci_tbi)(struct pci_controller *hose,
-			   dma_addr_t start, dma_addr_t end);
-
-	unsigned int (*mv_ioread8)(void __iomem *);
-	unsigned int (*mv_ioread16)(void __iomem *);
-	unsigned int (*mv_ioread32)(void __iomem *);
-
-	void (*mv_iowrite8)(u8, void __iomem *);
-	void (*mv_iowrite16)(u16, void __iomem *);
-	void (*mv_iowrite32)(u32, void __iomem *);
-
-	u8 (*mv_readb)(const volatile void __iomem *);
-	u16 (*mv_readw)(const volatile void __iomem *);
-	u32 (*mv_readl)(const volatile void __iomem *);
-	u64 (*mv_readq)(const volatile void __iomem *);
-
-	void (*mv_writeb)(u8, volatile void __iomem *);
-	void (*mv_writew)(u16, volatile void __iomem *);
-	void (*mv_writel)(u32, volatile void __iomem *);
-	void (*mv_writeq)(u64, volatile void __iomem *);
-
-	void __iomem *(*mv_ioportmap)(unsigned long);
-	void __iomem *(*mv_ioremap)(unsigned long, unsigned long);
-	void (*mv_iounmap)(volatile void __iomem *);
-	int (*mv_is_ioaddr)(unsigned long);
-	int (*mv_is_mmio)(const volatile void __iomem *);
-
-	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
-			     struct task_struct *);
-	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
-	void (*mv_flush_tlb_current)(struct mm_struct *);
-	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
-					  struct vm_area_struct *vma,
-					  unsigned long addr);
-
-	void (*update_irq_hw)(unsigned long, unsigned long, int);
-	void (*ack_irq)(unsigned long);
-	void (*device_interrupt)(unsigned long vector);
-	void (*machine_check)(unsigned long vector, unsigned long la);
-
-	void (*smp_callin)(void);
-	void (*init_arch)(void);
-	void (*init_irq)(void);
-	void (*init_rtc)(void);
-	void (*init_pci)(void);
-	void (*kill_arch)(int);
-
-	u8 (*pci_swizzle)(struct pci_dev *, u8 *);
-	int (*pci_map_irq)(const struct pci_dev *, u8, u8);
-	struct pci_ops *pci_ops;
-
-	struct _alpha_agp_info *(*agp_info)(void);
-
-	unsigned int (*rtc_get_time)(struct rtc_time *);
-	int (*rtc_set_time)(struct rtc_time *);
-
-	const char *vector_name;
-
-	/* NUMA information */
-	int (*pa_to_nid)(unsigned long);
-	int (*cpuid_to_nid)(int);
-	unsigned long (*node_mem_start)(int);
-	unsigned long (*node_mem_size)(int);
-
-	/* System specific parameters.  */
-	union {
-	    struct {
-		unsigned long gru_int_req_bits;
-	    } cia;
-
-	    struct {
-		unsigned long gamma_bias;
-	    } t2;
-
-	    struct {
-		unsigned int route_tab;
-	    } sio;
-	} sys;
-};
-
-extern struct alpha_machine_vector alpha_mv;
-
-#ifdef CONFIG_ALPHA_GENERIC
-extern int alpha_using_srm;
-#else
-#ifdef CONFIG_ALPHA_SRM
-#define alpha_using_srm 1
-#else
-#define alpha_using_srm 0
-#endif
-#endif /* GENERIC */
-
-#endif
-#endif /* __ALPHA_MACHVEC_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mc146818rtc.h b/ANDROID_3.4.5/arch/alpha/include/asm/mc146818rtc.h
deleted file mode 100644
index 097703f1..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef __ASM_ALPHA_MC146818RTC_H
-#define __ASM_ALPHA_MC146818RTC_H
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif /* __ASM_ALPHA_MC146818RTC_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mce.h b/ANDROID_3.4.5/arch/alpha/include/asm/mce.h
deleted file mode 100644
index 660285b9..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mce.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef __ALPHA_MCE_H
-#define __ALPHA_MCE_H
-
-/*
- * This is the logout header that should be common to all platforms
- * (assuming they are running OSF/1 PALcode, I guess).
- */
-struct el_common {
-	unsigned int	size;		/* size in bytes of logout area */
-	unsigned int	sbz1	: 30;	/* should be zero */
-	unsigned int	err2	:  1;	/* second error */
-	unsigned int	retry	:  1;	/* retry flag */
-	unsigned int	proc_offset;	/* processor-specific offset */
-	unsigned int	sys_offset;	/* system-specific offset */
-	unsigned int	code;		/* machine check code */
-	unsigned int	frame_rev;	/* frame revision */
-};
-
-/* Machine Check Frame for uncorrectable errors (Large format)
- *      --- This is used to log uncorrectable errors such as
- *          double bit ECC errors.
- *      --- These errors are detected by both processor and systems.
- */
-struct el_common_EV5_uncorrectable_mcheck {
-        unsigned long   shadow[8];        /* Shadow reg. 8-14, 25           */
-        unsigned long   paltemp[24];      /* PAL TEMP REGS.                 */
-        unsigned long   exc_addr;         /* Address of excepting instruction*/
-        unsigned long   exc_sum;          /* Summary of arithmetic traps.   */
-        unsigned long   exc_mask;         /* Exception mask (from exc_sum). */
-        unsigned long   pal_base;         /* Base address for PALcode.      */
-        unsigned long   isr;              /* Interrupt Status Reg.          */
-        unsigned long   icsr;             /* CURRENT SETUP OF EV5 IBOX      */
-        unsigned long   ic_perr_stat;     /* I-CACHE Reg. <11> set Data parity
-                                                         <12> set TAG parity*/
-        unsigned long   dc_perr_stat;     /* D-CACHE error Reg. Bits set to 1:
-                                                     <2> Data error in bank 0
-                                                     <3> Data error in bank 1
-                                                     <4> Tag error in bank 0
-                                                     <5> Tag error in bank 1 */
-        unsigned long   va;               /* Effective VA of fault or miss. */
-        unsigned long   mm_stat;          /* Holds the reason for D-stream 
-                                             fault or D-cache parity errors */
-        unsigned long   sc_addr;          /* Address that was being accessed
-                                             when EV5 detected Secondary cache
-                                             failure.                 */
-        unsigned long   sc_stat;          /* Helps determine if the error was
-                                             TAG/Data parity(Secondary Cache)*/
-        unsigned long   bc_tag_addr;      /* Contents of EV5 BC_TAG_ADDR    */
-        unsigned long   ei_addr;          /* Physical address of any transfer
-                                             that is logged in EV5 EI_STAT */
-        unsigned long   fill_syndrome;    /* For correcting ECC errors.     */
-        unsigned long   ei_stat;          /* Helps identify reason of any 
-                                             processor uncorrectable error
-                                             at its external interface.     */
-        unsigned long   ld_lock;          /* Contents of EV5 LD_LOCK register*/
-};
-
-struct el_common_EV6_mcheck {
-	unsigned int FrameSize;		/* Bytes, including this field */
-	unsigned int FrameFlags;	/* <31> = Retry, <30> = Second Error */
-	unsigned int CpuOffset;		/* Offset to CPU-specific info */
-	unsigned int SystemOffset;	/* Offset to system-specific info */
-	unsigned int MCHK_Code;
-	unsigned int MCHK_Frame_Rev;
-	unsigned long I_STAT;		/* EV6 Internal Processor Registers */
-	unsigned long DC_STAT;		/* (See the 21264 Spec) */
-	unsigned long C_ADDR;
-	unsigned long DC1_SYNDROME;
-	unsigned long DC0_SYNDROME;
-	unsigned long C_STAT;
-	unsigned long C_STS;
-	unsigned long MM_STAT;
-	unsigned long EXC_ADDR;
-	unsigned long IER_CM;
-	unsigned long ISUM;
-	unsigned long RESERVED0;
-	unsigned long PAL_BASE;
-	unsigned long I_CTL;
-	unsigned long PCTX;
-};
-
-
-#endif /* __ALPHA_MCE_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mman.h b/ANDROID_3.4.5/arch/alpha/include/asm/mman.h
deleted file mode 100644
index cbeb3616..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mman.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef __ALPHA_MMAN_H__
-#define __ALPHA_MMAN_H__
-
-#define PROT_READ	0x1		/* page can be read */
-#define PROT_WRITE	0x2		/* page can be written */
-#define PROT_EXEC	0x4		/* page can be executed */
-#define PROT_SEM	0x8		/* page may be used for atomic ops */
-#define PROT_NONE	0x0		/* page can not be accessed */
-#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED	0x01		/* Share changes */
-#define MAP_PRIVATE	0x02		/* Changes are private */
-#define MAP_TYPE	0x0f		/* Mask for type of mapping (OSF/1 is _wrong_) */
-#define MAP_FIXED	0x100		/* Interpret addr exactly */
-#define MAP_ANONYMOUS	0x10		/* don't use a file */
-
-/* not used by linux, but here to make sure we don't clash with OSF/1 defines */
-#define _MAP_HASSEMAPHORE 0x0200
-#define _MAP_INHERIT	0x0400
-#define _MAP_UNALIGNED	0x0800
-
-/* These are linux-specific */
-#define MAP_GROWSDOWN	0x01000		/* stack-like segment */
-#define MAP_DENYWRITE	0x02000		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x04000		/* mark it as an executable */
-#define MAP_LOCKED	0x08000		/* lock the mapping */
-#define MAP_NORESERVE	0x10000		/* don't check for reservations */
-#define MAP_POPULATE	0x20000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x40000		/* do not block on IO */
-#define MAP_STACK	0x80000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x100000	/* create a huge page mapping */
-
-#define MS_ASYNC	1		/* sync memory asynchronously */
-#define MS_SYNC		2		/* synchronous memory sync */
-#define MS_INVALIDATE	4		/* invalidate the caches */
-
-#define MCL_CURRENT	 8192		/* lock all currently mapped pages */
-#define MCL_FUTURE	16384		/* lock all additions to address space */
-
-#define MADV_NORMAL	0		/* no further special treatment */
-#define MADV_RANDOM	1		/* expect random page references */
-#define MADV_SEQUENTIAL	2		/* expect sequential page references */
-#define MADV_WILLNEED	3		/* will need these pages */
-#define	MADV_SPACEAVAIL	5		/* ensure resources are available */
-#define MADV_DONTNEED	6		/* don't need these pages */
-
-/* common/generic parameters */
-#define MADV_REMOVE	9		/* remove these pages & resources */
-#define MADV_DONTFORK	10		/* don't inherit across fork */
-#define MADV_DOFORK	11		/* do inherit across fork */
-
-#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
-#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
-
-#define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
-#define MADV_NOHUGEPAGE	15		/* Not worth backing with hugepages */
-
-#define MADV_DONTDUMP   16		/* Explicity exclude from the core dump,
-					   overrides the coredump filter bits */
-#define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
-
-/* compatibility flags */
-#define MAP_FILE	0
-
-#endif /* __ALPHA_MMAN_H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mmu.h b/ANDROID_3.4.5/arch/alpha/include/asm/mmu.h
deleted file mode 100644
index 3dc12777..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mmu.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ALPHA_MMU_H
-#define __ALPHA_MMU_H
-
-/* The alpha MMU context is one "unsigned long" bitmap per CPU */
-typedef unsigned long mm_context_t[NR_CPUS];
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mmu_context.h b/ANDROID_3.4.5/arch/alpha/include/asm/mmu_context.h
deleted file mode 100644
index 4c51c053..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mmu_context.h
+++ /dev/null
@@ -1,259 +0,0 @@
-#ifndef __ALPHA_MMU_CONTEXT_H
-#define __ALPHA_MMU_CONTEXT_H
-
-/*
- * get a new mmu context..
- *
- * Copyright (C) 1996, Linus Torvalds
- */
-
-#include <asm/machvec.h>
-#include <asm/compiler.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * Force a context reload. This is needed when we change the page
- * table pointer or when we update the ASN of the current process.
- */
-
-/* Don't get into trouble with dueling __EXTERN_INLINEs.  */
-#ifndef __EXTERN_INLINE
-#include <asm/io.h>
-#endif
-
-
-static inline unsigned long
-__reload_thread(struct pcb_struct *pcb)
-{
-	register unsigned long a0 __asm__("$16");
-	register unsigned long v0 __asm__("$0");
-
-	a0 = virt_to_phys(pcb);
-	__asm__ __volatile__(
-		"call_pal %2 #__reload_thread"
-		: "=r"(v0), "=r"(a0)
-		: "i"(PAL_swpctx), "r"(a0)
-		: "$1", "$22", "$23", "$24", "$25");
-
-	return v0;
-}
-
-
-/*
- * The maximum ASN's the processor supports.  On the EV4 this is 63
- * but the PAL-code doesn't actually use this information.  On the
- * EV5 this is 127, and EV6 has 255.
- *
- * On the EV4, the ASNs are more-or-less useless anyway, as they are
- * only used as an icache tag, not for TB entries.  On the EV5 and EV6,
- * ASN's also validate the TB entries, and thus make a lot more sense.
- *
- * The EV4 ASN's don't even match the architecture manual, ugh.  And
- * I quote: "If a processor implements address space numbers (ASNs),
- * and the old PTE has the Address Space Match (ASM) bit clear (ASNs
- * in use) and the Valid bit set, then entries can also effectively be
- * made coherent by assigning a new, unused ASN to the currently
- * running process and not reusing the previous ASN before calling the
- * appropriate PALcode routine to invalidate the translation buffer (TB)". 
- *
- * In short, the EV4 has a "kind of" ASN capability, but it doesn't actually
- * work correctly and can thus not be used (explaining the lack of PAL-code
- * support).
- */
-#define EV4_MAX_ASN 63
-#define EV5_MAX_ASN 127
-#define EV6_MAX_ASN 255
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define MAX_ASN	(alpha_mv.max_asn)
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define MAX_ASN	EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
-#  define MAX_ASN	EV5_MAX_ASN
-# else
-#  define MAX_ASN	EV6_MAX_ASN
-# endif
-#endif
-
-/*
- * cpu_last_asn(processor):
- * 63                                            0
- * +-------------+----------------+--------------+
- * | asn version | this processor | hardware asn |
- * +-------------+----------------+--------------+
- */
-
-#include <asm/smp.h>
-#ifdef CONFIG_SMP
-#define cpu_last_asn(cpuid)	(cpu_data[cpuid].last_asn)
-#else
-extern unsigned long last_asn;
-#define cpu_last_asn(cpuid)	last_asn
-#endif /* CONFIG_SMP */
-
-#define WIDTH_HARDWARE_ASN	8
-#define ASN_FIRST_VERSION (1UL << WIDTH_HARDWARE_ASN)
-#define HARDWARE_ASN_MASK ((1UL << WIDTH_HARDWARE_ASN) - 1)
-
-/*
- * NOTE! The way this is set up, the high bits of the "asn_cache" (and
- * the "mm->context") are the ASN _version_ code. A version of 0 is
- * always considered invalid, so to invalidate another process you only
- * need to do "p->mm->context = 0".
- *
- * If we need more ASN's than the processor has, we invalidate the old
- * user TLB's (tbiap()) and start a new ASN version. That will automatically
- * force a new asn for any other processes the next time they want to
- * run.
- */
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __MMU_EXTERN_INLINE
-#endif
-
-extern inline unsigned long
-__get_new_mm_context(struct mm_struct *mm, long cpu)
-{
-	unsigned long asn = cpu_last_asn(cpu);
-	unsigned long next = asn + 1;
-
-	if ((asn & HARDWARE_ASN_MASK) >= MAX_ASN) {
-		tbiap();
-		imb();
-		next = (asn & ~HARDWARE_ASN_MASK) + ASN_FIRST_VERSION;
-	}
-	cpu_last_asn(cpu) = next;
-	return next;
-}
-
-__EXTERN_INLINE void
-ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-	      struct task_struct *next)
-{
-	/* Check if our ASN is of an older version, and thus invalid. */
-	unsigned long asn;
-	unsigned long mmc;
-	long cpu = smp_processor_id();
-
-#ifdef CONFIG_SMP
-	cpu_data[cpu].asn_lock = 1;
-	barrier();
-#endif
-	asn = cpu_last_asn(cpu);
-	mmc = next_mm->context[cpu];
-	if ((mmc ^ asn) & ~HARDWARE_ASN_MASK) {
-		mmc = __get_new_mm_context(next_mm, cpu);
-		next_mm->context[cpu] = mmc;
-	}
-#ifdef CONFIG_SMP
-	else
-		cpu_data[cpu].need_new_asn = 1;
-#endif
-
-	/* Always update the PCB ASN.  Another thread may have allocated
-	   a new mm->context (via flush_tlb_mm) without the ASN serial
-	   number wrapping.  We have no way to detect when this is needed.  */
-	task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
-}
-
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-	      struct task_struct *next)
-{
-	/* As described, ASN's are broken for TLB usage.  But we can
-	   optimize for switching between threads -- if the mm is
-	   unchanged from current we needn't flush.  */
-	/* ??? May not be needed because EV4 PALcode recognizes that
-	   ASN's are broken and does a tbiap itself on swpctx, under
-	   the "Must set ASN or flush" rule.  At least this is true
-	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
-	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
-	if (prev_mm != next_mm)
-		tbiap();
-
-	/* Do continue to allocate ASNs, because we can still use them
-	   to avoid flushing the icache.  */
-	ev5_switch_mm(prev_mm, next_mm, next);
-}
-
-extern void __load_new_mm_context(struct mm_struct *);
-
-#ifdef CONFIG_SMP
-#define check_mmu_context()					\
-do {								\
-	int cpu = smp_processor_id();				\
-	cpu_data[cpu].asn_lock = 0;				\
-	barrier();						\
-	if (cpu_data[cpu].need_new_asn) {			\
-		struct mm_struct * mm = current->active_mm;	\
-		cpu_data[cpu].need_new_asn = 0;			\
-		if (!mm->context[cpu])			\
-			__load_new_mm_context(mm);		\
-	}							\
-} while(0)
-#else
-#define check_mmu_context()  do { } while(0)
-#endif
-
-__EXTERN_INLINE void
-ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-	__load_new_mm_context(next_mm);
-}
-
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-	__load_new_mm_context(next_mm);
-	tbiap();
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
-# else
-#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
-# endif
-#endif
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	int i;
-
-	for_each_online_cpu(i)
-		mm->context[i] = 0;
-	if (tsk != current)
-		task_thread_info(tsk)->pcb.ptbr
-		  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
-	return 0;
-}
-
-extern inline void
-destroy_context(struct mm_struct *mm)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-	task_thread_info(tsk)->pcb.ptbr
-	  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
-}
-
-#ifdef __MMU_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __MMU_EXTERN_INLINE
-#endif
-
-#endif /* __ALPHA_MMU_CONTEXT_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mmzone.h b/ANDROID_3.4.5/arch/alpha/include/asm/mmzone.h
deleted file mode 100644
index 445dc42e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mmzone.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
- * Adapted for the alpha wildfire architecture Jan 2001.
- */
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-
-#include <asm/smp.h>
-
-struct bootmem_data_t; /* stupid forward decl. */
-
-/*
- * Following are macros that are specific to this numa platform.
- */
-
-extern pg_data_t node_data[];
-
-#define alpha_pa_to_nid(pa)		\
-        (alpha_mv.pa_to_nid 		\
-	 ? alpha_mv.pa_to_nid(pa)	\
-	 : (0))
-#define node_mem_start(nid)		\
-        (alpha_mv.node_mem_start 	\
-	 ? alpha_mv.node_mem_start(nid) \
-	 : (0UL))
-#define node_mem_size(nid)		\
-        (alpha_mv.node_mem_size 	\
-	 ? alpha_mv.node_mem_size(nid) 	\
-	 : ((nid) ? (0UL) : (~0UL)))
-
-#define pa_to_nid(pa)		alpha_pa_to_nid(pa)
-#define NODE_DATA(nid)		(&node_data[(nid)])
-
-#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
-
-#if 1
-#define PLAT_NODE_DATA_LOCALNR(p, n)	\
-	(((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn)
-#else
-static inline unsigned long
-PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
-{
-	unsigned long temp;
-	temp = p >> PAGE_SHIFT;
-	return temp - PLAT_NODE_DATA(n)->gendata.node_start_pfn;
-}
-#endif
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Following are macros that each numa implementation must define.
- */
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-
-/*
- * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
- * and returns the kaddr corresponding to first physical page in the
- * node's mem_map.
- */
-#define LOCAL_BASE_ADDR(kaddr)						  \
-    ((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn  \
-			 << PAGE_SHIFT))
-
-/* XXX: FIXME -- wli */
-#define kern_addr_valid(kaddr)	(0)
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VALID_PAGE(page)	(((page) - mem_map) < max_mapnr)
-
-#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> 32))
-#define pgd_page(pgd)		(pfn_to_page(pgd_val(pgd) >> 32))
-#define pte_pfn(pte)		(pte_val(pte) >> 32)
-
-#define mk_pte(page, pgprot)						     \
-({								 	     \
-	pte_t pte;                                                           \
-	unsigned long pfn;                                                   \
-									     \
-	pfn = page_to_pfn(page) << 32; \
-	pte_val(pte) = pfn | pgprot_val(pgprot);			     \
-									     \
-	pte;								     \
-})
-
-#define pte_page(x)							\
-({									\
-       	unsigned long kvirt;						\
-	struct page * __xx;						\
-									\
-	kvirt = (unsigned long)__va(pte_val(x) >> (32-PAGE_SHIFT));	\
-	__xx = virt_to_page(kvirt);					\
-									\
-	__xx;                                                           \
-})
-
-#define page_to_pa(page)						\
-	(page_to_pfn(page) << PAGE_SHIFT)
-
-#define pfn_to_nid(pfn)		pa_to_nid(((u64)(pfn) << PAGE_SHIFT))
-#define pfn_valid(pfn)							\
-	(((pfn) - node_start_pfn(pfn_to_nid(pfn))) <			\
-	 node_spanned_pages(pfn_to_nid(pfn)))					\
-
-#define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
-
-#endif /* CONFIG_DISCONTIGMEM */
-
-#endif /* _ASM_MMZONE_H_ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/module.h b/ANDROID_3.4.5/arch/alpha/include/asm/module.h
deleted file mode 100644
index 7b63743c..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/module.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ALPHA_MODULE_H
-#define _ALPHA_MODULE_H
-
-struct mod_arch_specific
-{
-	unsigned int gotsecindex;
-};
-
-#define Elf_Sym Elf64_Sym
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Ehdr Elf64_Ehdr
-#define Elf_Phdr Elf64_Phdr
-#define Elf_Dyn Elf64_Dyn
-#define Elf_Rel Elf64_Rel
-#define Elf_Rela Elf64_Rela
-
-#define ARCH_SHF_SMALL SHF_ALPHA_GPREL
-
-#ifdef MODULE
-asm(".section .got,\"aws\",@progbits; .align 3; .previous");
-#endif
-
-#endif /*_ALPHA_MODULE_H*/
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/msgbuf.h b/ANDROID_3.4.5/arch/alpha/include/asm/msgbuf.h
deleted file mode 100644
index 98496501..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/msgbuf.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ALPHA_MSGBUF_H
-#define _ALPHA_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused1;
-	unsigned long  __unused2;
-};
-
-#endif /* _ALPHA_MSGBUF_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/mutex.h b/ANDROID_3.4.5/arch/alpha/include/asm/mutex.h
deleted file mode 100644
index 458c1f7f..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/page.h b/ANDROID_3.4.5/arch/alpha/include/asm/page.h
deleted file mode 100644
index 07af0625..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/page.h
+++ /dev/null
@@ -1,98 +0,0 @@
-#ifndef _ALPHA_PAGE_H
-#define _ALPHA_PAGE_H
-
-#include <linux/const.h>
-#include <asm/pal.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	13
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-#define STRICT_MM_TYPECHECKS
-
-extern void clear_page(void *page);
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vmaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-extern void copy_page(void * _to, void * _from);
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((x).pmd)
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)	(x)
-#define pmd_val(x)	(x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-
-#define __pte(x)	(x)
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-typedef struct page *pgtable_t;
-
-#ifdef USE_48_BIT_KSEG
-#define PAGE_OFFSET		0xffff800000000000UL
-#else
-#define PAGE_OFFSET		0xfffffc0000000000UL
-#endif
-
-#else
-
-#ifdef USE_48_BIT_KSEG
-#define PAGE_OFFSET		0xffff800000000000
-#else
-#define PAGE_OFFSET		0xfffffc0000000000
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
-#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
-#ifndef CONFIG_DISCONTIGMEM
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#endif /* CONFIG_DISCONTIGMEM */
-
-#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE | VM_EXEC | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-#endif /* _ALPHA_PAGE_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/pal.h b/ANDROID_3.4.5/arch/alpha/include/asm/pal.h
deleted file mode 100644
index 6699ee58..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/pal.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef __ALPHA_PAL_H
-#define __ALPHA_PAL_H
-
-/*
- * Common PAL-code
- */
-#define PAL_halt	  0
-#define PAL_cflush	  1
-#define PAL_draina	  2
-#define PAL_bpt		128
-#define PAL_bugchk	129
-#define PAL_chmk	131
-#define PAL_callsys	131
-#define PAL_imb		134
-#define PAL_rduniq	158
-#define PAL_wruniq	159
-#define PAL_gentrap	170
-#define PAL_nphalt	190
-
-/*
- * VMS specific PAL-code
- */
-#define PAL_swppal	10
-#define PAL_mfpr_vptb	41
-
-/*
- * OSF specific PAL-code
- */
-#define PAL_cserve	 9
-#define PAL_wripir	13
-#define PAL_rdmces	16
-#define PAL_wrmces	17
-#define PAL_wrfen	43
-#define PAL_wrvptptr	45
-#define PAL_jtopal	46
-#define PAL_swpctx	48
-#define PAL_wrval	49
-#define PAL_rdval	50
-#define PAL_tbi		51
-#define PAL_wrent	52
-#define PAL_swpipl	53
-#define PAL_rdps	54
-#define PAL_wrkgp	55
-#define PAL_wrusp	56
-#define PAL_wrperfmon	57
-#define PAL_rdusp	58
-#define PAL_whami	60
-#define PAL_retsys	61
-#define PAL_rti		63
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-extern void halt(void) __attribute__((noreturn));
-#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
-
-#define imb() \
-__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
-
-#define draina() \
-__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
-
-#define __CALL_PAL_R0(NAME, TYPE)				\
-extern inline TYPE NAME(void)					\
-{								\
-	register TYPE __r0 __asm__("$0");			\
-	__asm__ __volatile__(					\
-		"call_pal %1 # " #NAME				\
-		:"=r" (__r0)					\
-		:"i" (PAL_ ## NAME)				\
-		:"$1", "$16", "$22", "$23", "$24", "$25");	\
-	return __r0;						\
-}
-
-#define __CALL_PAL_W1(NAME, TYPE0)				\
-extern inline void NAME(TYPE0 arg0)				\
-{								\
-	register TYPE0 __r16 __asm__("$16") = arg0;		\
-	__asm__ __volatile__(					\
-		"call_pal %1 # "#NAME				\
-		: "=r"(__r16)					\
-		: "i"(PAL_ ## NAME), "0"(__r16)			\
-		: "$1", "$22", "$23", "$24", "$25");		\
-}
-
-#define __CALL_PAL_W2(NAME, TYPE0, TYPE1)			\
-extern inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
-{								\
-	register TYPE0 __r16 __asm__("$16") = arg0;		\
-	register TYPE1 __r17 __asm__("$17") = arg1;		\
-	__asm__ __volatile__(					\
-		"call_pal %2 # "#NAME				\
-		: "=r"(__r16), "=r"(__r17)			\
-		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
-		: "$1", "$22", "$23", "$24", "$25");		\
-}
-
-#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0)			\
-extern inline RTYPE NAME(TYPE0 arg0)				\
-{								\
-	register RTYPE __r0 __asm__("$0");			\
-	register TYPE0 __r16 __asm__("$16") = arg0;		\
-	__asm__ __volatile__(					\
-		"call_pal %2 # "#NAME				\
-		: "=r"(__r16), "=r"(__r0)			\
-		: "i"(PAL_ ## NAME), "0"(__r16)			\
-		: "$1", "$22", "$23", "$24", "$25");		\
-	return __r0;						\
-}
-
-#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1)		\
-extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1)		\
-{								\
-	register RTYPE __r0 __asm__("$0");			\
-	register TYPE0 __r16 __asm__("$16") = arg0;		\
-	register TYPE1 __r17 __asm__("$17") = arg1;		\
-	__asm__ __volatile__(					\
-		"call_pal %3 # "#NAME				\
-		: "=r"(__r16), "=r"(__r17), "=r"(__r0)		\
-		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
-		: "$1", "$22", "$23", "$24", "$25");		\
-	return __r0;						\
-}
-
-__CALL_PAL_W1(cflush, unsigned long);
-__CALL_PAL_R0(rdmces, unsigned long);
-__CALL_PAL_R0(rdps, unsigned long);
-__CALL_PAL_R0(rdusp, unsigned long);
-__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
-__CALL_PAL_R0(whami, unsigned long);
-__CALL_PAL_W2(wrent, void*, unsigned long);
-__CALL_PAL_W1(wripir, unsigned long);
-__CALL_PAL_W1(wrkgp, unsigned long);
-__CALL_PAL_W1(wrmces, unsigned long);
-__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
-__CALL_PAL_W1(wrusp, unsigned long);
-__CALL_PAL_W1(wrvptptr, unsigned long);
-
-/*
- * TB routines..
- */
-#define __tbi(nr,arg,arg1...)					\
-({								\
-	register unsigned long __r16 __asm__("$16") = (nr);	\
-	register unsigned long __r17 __asm__("$17"); arg;	\
-	__asm__ __volatile__(					\
-		"call_pal %3 #__tbi"				\
-		:"=r" (__r16),"=r" (__r17)			\
-		:"0" (__r16),"i" (PAL_tbi) ,##arg1		\
-		:"$0", "$1", "$22", "$23", "$24", "$25");	\
-})
-
-#define tbi(x,y)	__tbi(x,__r17=(y),"1" (__r17))
-#define tbisi(x)	__tbi(1,__r17=(x),"1" (__r17))
-#define tbisd(x)	__tbi(2,__r17=(x),"1" (__r17))
-#define tbis(x)		__tbi(3,__r17=(x),"1" (__r17))
-#define tbiap()		__tbi(-1, /* no second argument */)
-#define tbia()		__tbi(-2, /* no second argument */)
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_PAL_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/param.h b/ANDROID_3.4.5/arch/alpha/include/asm/param.h
deleted file mode 100644
index e691ecfe..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/param.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASM_ALPHA_PARAM_H
-#define _ASM_ALPHA_PARAM_H
-
-/* ??? Gross.  I don't want to parameterize this, and supposedly the
-   hardware ignores reprogramming.  We also need userland buy-in to the 
-   change in HZ, since this is visible in the wait4 resources etc.  */
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ
-#define USER_HZ		HZ
-#else
-#define HZ		1024
-#endif
-
-#define EXEC_PAGESIZE	8192
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#ifdef __KERNEL__
-# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
-#endif
-
-#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/parport.h b/ANDROID_3.4.5/arch/alpha/include/asm/parport.h
deleted file mode 100644
index c5ee7cbb..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/parport.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * parport.h: platform-specific PC-style parport initialisation
- *
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef _ASM_AXP_PARPORT_H
-#define _ASM_AXP_PARPORT_H 1
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASM_AXP_PARPORT_H) */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/pci.h b/ANDROID_3.4.5/arch/alpha/include/asm/pci.h
deleted file mode 100644
index d01afb78..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/pci.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ALPHA_PCI_H
-#define __ALPHA_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <asm/scatterlist.h>
-#include <asm/machvec.h>
-#include <asm-generic/pci-bridge.h>
-
-/*
- * The following structure is used to manage multiple PCI busses.
- */
-
-struct pci_dev;
-struct pci_bus;
-struct resource;
-struct pci_iommu_arena;
-struct page;
-
-/* A controller.  Used to manage multiple PCI busses.  */
-
-struct pci_controller {
-	struct pci_controller *next;
-        struct pci_bus *bus;
-	struct resource *io_space;
-	struct resource *mem_space;
-
-	/* The following are for reporting to userland.  The invariant is
-	   that if we report a BWX-capable dense memory, we do not report
-	   a sparse memory at all, even if it exists.  */
-	unsigned long sparse_mem_base;
-	unsigned long dense_mem_base;
-	unsigned long sparse_io_base;
-	unsigned long dense_io_base;
-
-	/* This one's for the kernel only.  It's in KSEG somewhere.  */
-	unsigned long config_space_base;
-
-	unsigned int index;
-	/* For compatibility with current (as of July 2003) pciutils
-	   and XFree86. Eventually will be removed. */
-	unsigned int need_domain_info;
-
-	struct pci_iommu_arena *sg_pci;
-	struct pci_iommu_arena *sg_isa;
-
-	void *sysdata;
-};
-
-/* Override the logic in pci_scan_bus for skipping already-configured
-   bus numbers.  */
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		alpha_mv.min_io_address
-#define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-extern inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/* IOMMU controls.  */
-
-/* The PCI address space does not equal the physical memory address space.
-   The networking and block device layers use this boolean for bounce buffer
-   decisions.  */
-#define PCI_DMA_BUS_IS_PHYS  0
-
-#ifdef CONFIG_PCI
-
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	unsigned long cacheline_size;
-	u8 byte;
-
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
-	if (byte == 0)
-		cacheline_size = 1024;
-	else
-		cacheline_size = (int) byte * 4;
-
-	*strat = PCI_DMA_BURST_BOUNDARY;
-	*strategy_parameter = cacheline_size;
-}
-#endif
-
-/* TODO: integrate with include/asm-generic/pci.h ? */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
-#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-	return hose->need_domain_info;
-}
-
-#endif /* __KERNEL__ */
-
-/* Values for the `which' argument to sys_pciconfig_iobase.  */
-#define IOBASE_HOSE		0
-#define IOBASE_SPARSE_MEM	1
-#define IOBASE_DENSE_MEM	2
-#define IOBASE_SPARSE_IO	3
-#define IOBASE_DENSE_IO		4
-#define IOBASE_ROOT_BUS		5
-#define IOBASE_FROM_HOSE	0x10000
-
-extern struct pci_dev *isa_bridge;
-
-extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
-			   size_t count);
-extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
-			    size_t count);
-extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
-				      struct vm_area_struct *vma,
-				      enum pci_mmap_state mmap_state);
-extern void pci_adjust_legacy_attr(struct pci_bus *bus,
-				   enum pci_mmap_state mmap_type);
-#define HAVE_PCI_LEGACY	1
-
-extern int pci_create_resource_files(struct pci_dev *dev);
-extern void pci_remove_resource_files(struct pci_dev *dev);
-
-#endif /* __ALPHA_PCI_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/percpu.h b/ANDROID_3.4.5/arch/alpha/include/asm/percpu.h
deleted file mode 100644
index 2c12378e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/percpu.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ALPHA_PERCPU_H
-#define __ALPHA_PERCPU_H
-
-/*
- * To calculate addresses of locally defined variables, GCC uses
- * 32-bit displacement from the GP. Which doesn't work for per cpu
- * variables in modules, as an offset to the kernel per cpu area is
- * way above 4G.
- *
- * Always use weak definitions for percpu variables in modules.
- */
-#if defined(MODULE) && defined(CONFIG_SMP)
-#define ARCH_NEEDS_WEAK_PER_CPU
-#endif
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ALPHA_PERCPU_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/perf_event.h b/ANDROID_3.4.5/arch/alpha/include/asm/perf_event.h
deleted file mode 100644
index 5996e7a6..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/perf_event.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_ALPHA_PERF_EVENT_H
-#define __ASM_ALPHA_PERF_EVENT_H
-
-#endif /* __ASM_ALPHA_PERF_EVENT_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/pgalloc.h b/ANDROID_3.4.5/arch/alpha/include/asm/pgalloc.h
deleted file mode 100644
index bc2a0daf..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/pgalloc.h
+++ /dev/null
@@ -1,88 +0,0 @@
-#ifndef _ALPHA_PGALLOC_H
-#define _ALPHA_PGALLOC_H
-
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-
-/*      
- * Allocate and free page tables. The xxx_kernel() versions are
- * used to allocate a kernel page table - this turns on ASN bits
- * if any.
- */
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte)
-{
-	pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
-{
-	pmd_set(pmd, pte);
-}
-
-static inline void
-pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
-{
-	pgd_set(pgd, pmd);
-}
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-
-static inline void
-pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_page((unsigned long)pgd);
-}
-
-static inline pmd_t *
-pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	return ret;
-}
-
-static inline void
-pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	free_page((unsigned long)pmd);
-}
-
-static inline pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	return pte;
-}
-
-static inline void
-pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_page((unsigned long)pte);
-}
-
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte = pte_alloc_one_kernel(mm, address);
-	struct page *page;
-
-	if (!pte)
-		return NULL;
-	page = virt_to_page(pte);
-	pgtable_page_ctor(page);
-	return page;
-}
-
-static inline void
-pte_free(struct mm_struct *mm, pgtable_t page)
-{
-	pgtable_page_dtor(page);
-	__free_page(page);
-}
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _ALPHA_PGALLOC_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/pgtable.h b/ANDROID_3.4.5/arch/alpha/include/asm/pgtable.h
deleted file mode 100644
index 81a4342d..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/pgtable.h
+++ /dev/null
@@ -1,379 +0,0 @@
-#ifndef _ALPHA_PGTABLE_H
-#define _ALPHA_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the Alpha page table tree.
- *
- * This hopefully works with any standard Alpha page-size, as defined
- * in <asm/page.h> (currently 8192).
- */
-#include <linux/mmzone.h>
-
-#include <asm/page.h>
-#include <asm/processor.h>	/* For TASK_SIZE */
-#include <asm/machvec.h>
-#include <asm/setup.h>
-
-struct mm_struct;
-struct vm_area_struct;
-
-/* Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT	(PAGE_SHIFT + 2*(PAGE_SHIFT-3))
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/*
- * Entries per page directory level:  the Alpha is three-level, with
- * all levels having a one-page page table.
- */
-#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
-#define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
-#define PTRS_PER_PGD	(1UL << (PAGE_SHIFT-3))
-#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0
-
-/* Number of pointers that fit on a page:  this will go away. */
-#define PTRS_PER_PAGE	(1UL << (PAGE_SHIFT-3))
-
-#ifdef CONFIG_ALPHA_LARGE_VMALLOC
-#define VMALLOC_START		0xfffffe0000000000
-#else
-#define VMALLOC_START		(-2*PGDIR_SIZE)
-#endif
-#define VMALLOC_END		(-PGDIR_SIZE)
-
-/*
- * OSF/1 PAL-code-imposed page table bits
- */
-#define _PAGE_VALID	0x0001
-#define _PAGE_FOR	0x0002	/* used for page protection (fault on read) */
-#define _PAGE_FOW	0x0004	/* used for page protection (fault on write) */
-#define _PAGE_FOE	0x0008	/* used for page protection (fault on exec) */
-#define _PAGE_ASM	0x0010
-#define _PAGE_KRE	0x0100	/* xxx - see below on the "accessed" bit */
-#define _PAGE_URE	0x0200	/* xxx */
-#define _PAGE_KWE	0x1000	/* used to do the dirty bit in software */
-#define _PAGE_UWE	0x2000	/* used to do the dirty bit in software */
-
-/* .. and these are ours ... */
-#define _PAGE_DIRTY	0x20000
-#define _PAGE_ACCESSED	0x40000
-#define _PAGE_FILE	0x80000	/* set:pagecache, unset:swap */
-
-/*
- * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
- * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
- * Under Linux/AXP, the "accessed" bit just means "read", and I'll just use
- * the KRE/URE bits to watch for it. That way we don't need to overload the
- * KWE/UWE bits with both handling dirty and accessed.
- *
- * Note that the kernel uses the accessed bit just to check whether to page
- * out a page or not, so it doesn't have to be exact anyway.
- */
-
-#define __DIRTY_BITS	(_PAGE_DIRTY | _PAGE_KWE | _PAGE_UWE)
-#define __ACCESS_BITS	(_PAGE_ACCESSED | _PAGE_KRE | _PAGE_URE)
-
-#define _PFN_MASK	0xFFFFFFFF00000000UL
-
-#define _PAGE_TABLE	(_PAGE_VALID | __DIRTY_BITS | __ACCESS_BITS)
-#define _PAGE_CHG_MASK	(_PFN_MASK | __DIRTY_BITS | __ACCESS_BITS)
-
-/*
- * All the normal masks have the "page accessed" bits on, as any time they are used,
- * the page is accessed. They are cleared only by the page-out routines
- */
-#define PAGE_NONE	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOR | _PAGE_FOW | _PAGE_FOE)
-#define PAGE_SHARED	__pgprot(_PAGE_VALID | __ACCESS_BITS)
-#define PAGE_COPY	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW)
-#define PAGE_READONLY	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW)
-#define PAGE_KERNEL	__pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE | _PAGE_KWE)
-
-#define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
-
-#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
-#define _PAGE_S(x) _PAGE_NORMAL(x)
-
-/*
- * The hardware can handle write-only mappings, but as the Alpha
- * architecture does byte-wide writes with a read-modify-write
- * sequence, it's not practical to have write-without-read privs.
- * Thus the "-w- -> rw-" and "-wx -> rwx" mapping here (and in
- * arch/alpha/mm/fault.c)
- */
-	/* xwr */
-#define __P000	_PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __P001	_PAGE_P(_PAGE_FOE | _PAGE_FOW)
-#define __P010	_PAGE_P(_PAGE_FOE)
-#define __P011	_PAGE_P(_PAGE_FOE)
-#define __P100	_PAGE_P(_PAGE_FOW | _PAGE_FOR)
-#define __P101	_PAGE_P(_PAGE_FOW)
-#define __P110	_PAGE_P(0)
-#define __P111	_PAGE_P(0)
-
-#define __S000	_PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __S001	_PAGE_S(_PAGE_FOE | _PAGE_FOW)
-#define __S010	_PAGE_S(_PAGE_FOE)
-#define __S011	_PAGE_S(_PAGE_FOE)
-#define __S100	_PAGE_S(_PAGE_FOW | _PAGE_FOR)
-#define __S101	_PAGE_S(_PAGE_FOW)
-#define __S110	_PAGE_S(0)
-#define __S111	_PAGE_S(0)
-
-/*
- * pgprot_noncached() is only for infiniband pci support, and a real
- * implementation for RAM would be more complicated.
- */
-#define pgprot_noncached(prot)	(prot)
-
-/*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
- * ZERO_PAGE is a global shared page that is always zero:  used
- * for zero-mapped memory areas etc..
- */
-extern pte_t __bad_page(void);
-extern pmd_t * __bad_pagetable(void);
-
-extern unsigned long __zero_page(void);
-
-#define BAD_PAGETABLE	__bad_pagetable()
-#define BAD_PAGE	__bad_page()
-#define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
-
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-#define SIZEOF_PTR_LOG2			3
-
-/* to find an entry in a page-table */
-#define PAGE_PTR(address)		\
-  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
-
-/*
- * On certain platforms whose physical address space can overlap KSEG,
- * namely EV6 and above, we must re-twiddle the physaddr to restore the
- * correct high-order bits.
- *
- * This is extremely confusing until you realize that this is actually
- * just working around a userspace bug.  The X server was intending to
- * provide the physical address but instead provided the KSEG address.
- * Or tried to, except it's not representable.
- * 
- * On Tsunami there's nothing meaningful at 0x40000000000, so this is
- * a safe thing to do.  Come the first core logic that does put something
- * in this area -- memory or whathaveyou -- then this hack will have
- * to go away.  So be prepared!
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) && defined(USE_48_BIT_KSEG)
-#error "EV6-only feature in a generic kernel"
-#endif
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_EV6) && !defined(USE_48_BIT_KSEG))
-#define KSEG_PFN	(0xc0000000000UL >> PAGE_SHIFT)
-#define PHYS_TWIDDLE(pfn) \
-  ((((pfn) & KSEG_PFN) == (0x40000000000UL >> PAGE_SHIFT)) \
-  ? ((pfn) ^= KSEG_PFN) : (pfn))
-#else
-#define PHYS_TWIDDLE(pfn) (pfn)
-#endif
-
-/*
- * Conversion functions:  convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#ifndef CONFIG_DISCONTIGMEM
-#define page_to_pa(page)	(((page) - mem_map) << PAGE_SHIFT)
-
-#define pte_pfn(pte)	(pte_val(pte) >> 32)
-#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, pgprot)						\
-({									\
-	pte_t pte;							\
-									\
-	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
-	pte;								\
-})
-#endif
-
-extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
-{ pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
-
-extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
-
-extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
-{ pmd_val(*pmdp) = _PAGE_TABLE | ((((unsigned long) ptep) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
-
-extern inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp)
-{ pgd_val(*pgdp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
-
-
-extern inline unsigned long
-pmd_page_vaddr(pmd_t pmd)
-{
-	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
-}
-
-#ifndef CONFIG_DISCONTIGMEM
-#define pmd_page(pmd)	(mem_map + ((pmd_val(pmd) & _PFN_MASK) >> 32))
-#define pgd_page(pgd)	(mem_map + ((pgd_val(pgd) & _PFN_MASK) >> 32))
-#endif
-
-extern inline unsigned long pgd_page_vaddr(pgd_t pgd)
-{ return PAGE_OFFSET + ((pgd_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); }
-
-extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
-extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
-extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_val(*ptep) = 0;
-}
-
-extern inline int pmd_none(pmd_t pmd)		{ return !pmd_val(pmd); }
-extern inline int pmd_bad(pmd_t pmd)		{ return (pmd_val(pmd) & ~_PFN_MASK) != _PAGE_TABLE; }
-extern inline int pmd_present(pmd_t pmd)	{ return pmd_val(pmd) & _PAGE_VALID; }
-extern inline void pmd_clear(pmd_t * pmdp)	{ pmd_val(*pmdp) = 0; }
-
-extern inline int pgd_none(pgd_t pgd)		{ return !pgd_val(pgd); }
-extern inline int pgd_bad(pgd_t pgd)		{ return (pgd_val(pgd) & ~_PFN_MASK) != _PAGE_TABLE; }
-extern inline int pgd_present(pgd_t pgd)	{ return pgd_val(pgd) & _PAGE_VALID; }
-extern inline void pgd_clear(pgd_t * pgdp)	{ pgd_val(*pgdp) = 0; }
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-extern inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOW); }
-extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
-extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-extern inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
-extern inline int pte_special(pte_t pte)	{ return 0; }
-
-extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
-extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
-extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); return pte; }
-extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
-extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
-extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
-extern inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
-#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
-
-/*
- * The smp_read_barrier_depends() in the following functions are required to
- * order the load of *dir (the pointer in the top level page table) with any
- * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir).
- *
- * If this ordering is not enforced, the CPU might load an older value of
- * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for
- * more details.
- *
- * Note that we never change the mm->pgd pointer after the task is running, so
- * pgd_offset does not require such a barrier.
- */
-
-/* Find an entry in the second-level page table.. */
-extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
-{
-	pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
-	smp_read_barrier_depends(); /* see above */
-	return ret;
-}
-
-/* Find an entry in the third-level page table.. */
-extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
-{
-	pte_t *ret = (pte_t *) pmd_page_vaddr(*dir)
-		+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
-	smp_read_barrier_depends(); /* see above */
-	return ret;
-}
-
-#define pte_offset_map(dir,addr)	pte_offset_kernel((dir),(addr))
-#define pte_unmap(pte)			do { } while (0)
-
-extern pgd_t swapper_pg_dir[1024];
-
-/*
- * The Alpha doesn't have any external MMU info:  the kernel page
- * tables contain all the necessary information.
- */
-extern inline void update_mmu_cache(struct vm_area_struct * vma,
-	unsigned long address, pte_t *ptep)
-{
-}
-
-/*
- * Non-present pages:  high 24 bits are offset, next 8 bits type,
- * low 32 bits zero.
- */
-extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
-{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
-
-#define __swp_type(x)		(((x).val >> 32) & 0xff)
-#define __swp_offset(x)		((x).val >> 40)
-#define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#define pte_to_pgoff(pte)	(pte_val(pte) >> 32)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 32) | _PAGE_FILE })
-
-#define PTE_FILE_MAX_BITS	32
-
-#ifndef CONFIG_DISCONTIGMEM
-#define kern_addr_valid(addr)	(1)
-#endif
-
-#define io_remap_pfn_range(vma, start, pfn, size, prot)	\
-		remap_pfn_range(vma, start, pfn, size, prot)
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-extern void paging_init(void);
-
-#include <asm-generic/pgtable.h>
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#endif /* _ALPHA_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/poll.h b/ANDROID_3.4.5/arch/alpha/include/asm/poll.h
deleted file mode 100644
index c98509d3..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/posix_types.h b/ANDROID_3.4.5/arch/alpha/include/asm/posix_types.h
deleted file mode 100644
index 24779fc9..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/posix_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ALPHA_POSIX_TYPES_H
-#define _ALPHA_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned int	__kernel_ino_t;
-#define __kernel_ino_t __kernel_ino_t
-
-typedef unsigned int	__kernel_nlink_t;
-#define __kernel_nlink_t __kernel_nlink_t
-
-typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
-
-#include <asm-generic/posix_types.h>
-
-#endif /* _ALPHA_POSIX_TYPES_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/processor.h b/ANDROID_3.4.5/arch/alpha/include/asm/processor.h
deleted file mode 100644
index 94afe585..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/processor.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * include/asm-alpha/processor.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-#ifndef __ASM_ALPHA_PROCESSOR_H
-#define __ASM_ALPHA_PROCESSOR_H
-
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
-/*
- * Returns current instruction pointer ("program counter").
- */
-#define current_text_addr() \
-  ({ void *__pc; __asm__ ("br %0,.+4" : "=r"(__pc)); __pc; })
-
-/*
- * We have a 42-bit user address space: 4TB user VM...
- */
-#define TASK_SIZE (0x40000000000UL)
-
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
-
-#define STACK_TOP_MAX	0x00120000000UL
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-/* This is dead.  Everything has been moved to thread_info.  */
-struct thread_struct { };
-#define INIT_THREAD  { }
-
-/* Return saved PC of a blocked thread.  */
-struct task_struct;
-extern unsigned long thread_saved_pc(struct task_struct *);
-
-/* Do necessary setup to start up a newly executed thread.  */
-extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-/* Create a kernel thread without removing it from tasklists.  */
-extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
-
-#define KSTK_ESP(tsk) \
-  ((tsk) == current ? rdusp() : task_thread_info(tsk)->pcb.usp)
-
-#define cpu_relax()	barrier()
-
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-#ifndef CONFIG_SMP
-/* Nothing to prefetch. */
-#define spin_lock_prefetch(lock)  	do { } while (0)
-#endif
-
-extern inline void prefetch(const void *ptr)  
-{ 
-	__builtin_prefetch(ptr, 0, 3);
-}
-
-extern inline void prefetchw(const void *ptr)  
-{
-	__builtin_prefetch(ptr, 1, 3);
-}
-
-#ifdef CONFIG_SMP
-extern inline void spin_lock_prefetch(const void *ptr)  
-{
-	__builtin_prefetch(ptr, 1, 3);
-}
-#endif
-
-#endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/ptrace.h b/ANDROID_3.4.5/arch/alpha/include/asm/ptrace.h
deleted file mode 100644
index fd698a17..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/ptrace.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef _ASMAXP_PTRACE_H
-#define _ASMAXP_PTRACE_H
-
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry
- *
- * NOTE! I want to minimize the overhead of system calls, so this
- * struct has as little information as possible.  I does not have
- *
- *  - floating point regs: the kernel doesn't change those
- *  - r9-15: saved by the C compiler
- *
- * This makes "fork()" and "exec()" a bit more complex, but should
- * give us low system call latency.
- */
-
-struct pt_regs {
-	unsigned long r0;
-	unsigned long r1;
-	unsigned long r2;
-	unsigned long r3;
-	unsigned long r4;
-	unsigned long r5;
-	unsigned long r6;
-	unsigned long r7;
-	unsigned long r8;
-	unsigned long r19;
-	unsigned long r20;
-	unsigned long r21;
-	unsigned long r22;
-	unsigned long r23;
-	unsigned long r24;
-	unsigned long r25;
-	unsigned long r26;
-	unsigned long r27;
-	unsigned long r28;
-	unsigned long hae;
-/* JRP - These are the values provided to a0-a2 by PALcode */
-	unsigned long trap_a0;
-	unsigned long trap_a1;
-	unsigned long trap_a2;
-/* These are saved by PAL-code: */
-	unsigned long ps;
-	unsigned long pc;
-	unsigned long gp;
-	unsigned long r16;
-	unsigned long r17;
-	unsigned long r18;
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long r9;
-	unsigned long r10;
-	unsigned long r11;
-	unsigned long r12;
-	unsigned long r13;
-	unsigned long r14;
-	unsigned long r15;
-	unsigned long r26;
-	unsigned long fp[32];	/* fp[31] is fpcr */
-};
-
-#ifdef __KERNEL__
-
-#define arch_has_single_step()		(1)
-#define user_mode(regs) (((regs)->ps & 8) != 0)
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-
-#define task_pt_regs(task) \
-  ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1)
-
-#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/reg.h b/ANDROID_3.4.5/arch/alpha/include/asm/reg.h
deleted file mode 100644
index 86ff916f..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/reg.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef __reg_h__
-#define __reg_h__
-
-/*
- * Exception frame offsets.
- */
-#define EF_V0		0
-#define EF_T0		1
-#define EF_T1		2
-#define EF_T2		3
-#define EF_T3		4
-#define EF_T4		5
-#define EF_T5		6
-#define EF_T6		7
-#define EF_T7		8
-#define EF_S0		9
-#define EF_S1		10
-#define EF_S2		11
-#define EF_S3		12
-#define EF_S4		13
-#define EF_S5		14
-#define EF_S6		15
-#define EF_A3		16
-#define EF_A4		17
-#define EF_A5		18
-#define EF_T8		19
-#define EF_T9		20
-#define EF_T10		21
-#define EF_T11		22
-#define EF_RA		23
-#define EF_T12		24
-#define EF_AT		25
-#define EF_SP		26
-#define EF_PS		27
-#define EF_PC		28
-#define EF_GP		29
-#define EF_A0		30
-#define EF_A1		31
-#define EF_A2		32
-
-#define EF_SIZE		(33*8)
-#define HWEF_SIZE	(6*8)		/* size of PAL frame (PS-A2) */
-
-#define EF_SSIZE	(EF_SIZE - HWEF_SIZE)
-
-/*
- * Map register number into core file offset.
- */
-#define CORE_REG(reg, ubase) \
-	(((unsigned long *)((unsigned long)(ubase)))[reg])
-
-#endif /* __reg_h__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/regdef.h b/ANDROID_3.4.5/arch/alpha/include/asm/regdef.h
deleted file mode 100644
index 142df9c4..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/regdef.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __alpha_regdef_h__
-#define __alpha_regdef_h__
-
-#define v0	$0	/* function return value */
-
-#define t0	$1	/* temporary registers (caller-saved) */
-#define t1	$2
-#define t2	$3
-#define t3	$4
-#define t4	$5
-#define t5	$6
-#define t6	$7
-#define t7	$8
-
-#define	s0	$9	/* saved-registers (callee-saved registers) */
-#define	s1	$10
-#define	s2	$11
-#define	s3	$12
-#define	s4	$13
-#define	s5	$14
-#define	s6	$15
-#define	fp	s6	/* frame-pointer (s6 in frame-less procedures) */
-
-#define a0	$16	/* argument registers (caller-saved) */
-#define a1	$17
-#define a2	$18
-#define a3	$19
-#define a4	$20
-#define a5	$21
-
-#define t8	$22	/* more temps (caller-saved) */
-#define t9	$23
-#define t10	$24
-#define t11	$25
-#define ra	$26	/* return address register */
-#define t12	$27
-
-#define pv	t12	/* procedure-variable register */
-#define AT	$at	/* assembler temporary */
-#define gp	$29	/* global pointer */
-#define sp	$30	/* stack pointer */
-#define zero	$31	/* reads as zero, writes are noops */
-
-#endif /* __alpha_regdef_h__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/resource.h b/ANDROID_3.4.5/arch/alpha/include/asm/resource.h
deleted file mode 100644
index c10874ff..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/resource.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ALPHA_RESOURCE_H
-#define _ALPHA_RESOURCE_H
-
-/*
- * Alpha/Linux-specific ordering of these four resource limit IDs,
- * the rest comes from the generic header:
- */
-#define RLIMIT_NOFILE		6	/* max number of open files */
-#define RLIMIT_AS		7	/* address space limit */
-#define RLIMIT_NPROC		8	/* max number of processes */
-#define RLIMIT_MEMLOCK		9	/* max locked-in-memory address space */
-
-/*
- * SuS says limits have to be unsigned.  Fine, it's unsigned, but
- * we retain the old value for compatibility, especially with DU. 
- * When you run into the 2^63 barrier, you call me.
- */
-#define RLIM_INFINITY		0x7ffffffffffffffful
-
-#include <asm-generic/resource.h>
-
-#endif /* _ALPHA_RESOURCE_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/rtc.h b/ANDROID_3.4.5/arch/alpha/include/asm/rtc.h
deleted file mode 100644
index d70408d3..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/rtc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ALPHA_RTC_H
-#define _ALPHA_RTC_H
-
-#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
- || defined(CONFIG_ALPHA_GENERIC)
-# define get_rtc_time		alpha_mv.rtc_get_time
-# define set_rtc_time		alpha_mv.rtc_set_time
-#endif
-
-#include <asm-generic/rtc.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/rwsem.h b/ANDROID_3.4.5/arch/alpha/include/asm/rwsem.h
deleted file mode 100644
index a83bbea6..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/rwsem.h
+++ /dev/null
@@ -1,223 +0,0 @@
-#ifndef _ALPHA_RWSEM_H
-#define _ALPHA_RWSEM_H
-
-/*
- * Written by Ivan Kokshaysky <ink@jurassic.park.msu.ru>, 2001.
- * Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
- */
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-
-#define RWSEM_UNLOCKED_VALUE		0x0000000000000000L
-#define RWSEM_ACTIVE_BIAS		0x0000000000000001L
-#define RWSEM_ACTIVE_MASK		0x00000000ffffffffL
-#define RWSEM_WAITING_BIAS		(-0x0000000100000000L)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	long oldcount;
-#ifndef	CONFIG_SMP
-	oldcount = sem->count;
-	sem->count += RWSEM_ACTIVE_READ_BIAS;
-#else
-	long temp;
-	__asm__ __volatile__(
-	"1:	ldq_l	%0,%1\n"
-	"	addq	%0,%3,%2\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,2f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
-	:"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory");
-#endif
-	if (unlikely(oldcount < 0))
-		rwsem_down_read_failed(sem);
-}
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	long old, new, res;
-
-	res = sem->count;
-	do {
-		new = res + RWSEM_ACTIVE_READ_BIAS;
-		if (new <= 0)
-			break;
-		old = res;
-		res = cmpxchg(&sem->count, old, new);
-	} while (res != old);
-	return res >= 0 ? 1 : 0;
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	long oldcount;
-#ifndef	CONFIG_SMP
-	oldcount = sem->count;
-	sem->count += RWSEM_ACTIVE_WRITE_BIAS;
-#else
-	long temp;
-	__asm__ __volatile__(
-	"1:	ldq_l	%0,%1\n"
-	"	addq	%0,%3,%2\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,2f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
-	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
-#endif
-	if (unlikely(oldcount))
-		rwsem_down_write_failed(sem);
-}
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	long ret = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
-			   RWSEM_ACTIVE_WRITE_BIAS);
-	if (ret == RWSEM_UNLOCKED_VALUE)
-		return 1;
-	return 0;
-}
-
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	long oldcount;
-#ifndef	CONFIG_SMP
-	oldcount = sem->count;
-	sem->count -= RWSEM_ACTIVE_READ_BIAS;
-#else
-	long temp;
-	__asm__ __volatile__(
-	"	mb\n"
-	"1:	ldq_l	%0,%1\n"
-	"	subq	%0,%3,%2\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
-	:"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory");
-#endif
-	if (unlikely(oldcount < 0))
-		if ((int)oldcount - RWSEM_ACTIVE_READ_BIAS == 0)
-			rwsem_wake(sem);
-}
-
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	long count;
-#ifndef	CONFIG_SMP
-	sem->count -= RWSEM_ACTIVE_WRITE_BIAS;
-	count = sem->count;
-#else
-	long temp;
-	__asm__ __volatile__(
-	"	mb\n"
-	"1:	ldq_l	%0,%1\n"
-	"	subq	%0,%3,%2\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,2f\n"
-	"	subq	%0,%3,%0\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (count), "=m" (sem->count), "=&r" (temp)
-	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
-#endif
-	if (unlikely(count))
-		if ((int)count == 0)
-			rwsem_wake(sem);
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	long oldcount;
-#ifndef	CONFIG_SMP
-	oldcount = sem->count;
-	sem->count -= RWSEM_WAITING_BIAS;
-#else
-	long temp;
-	__asm__ __volatile__(
-	"1:	ldq_l	%0,%1\n"
-	"	addq	%0,%3,%2\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,2f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
-	:"Ir" (-RWSEM_WAITING_BIAS), "m" (sem->count) : "memory");
-#endif
-	if (unlikely(oldcount < 0))
-		rwsem_downgrade_wake(sem);
-}
-
-static inline void rwsem_atomic_add(long val, struct rw_semaphore *sem)
-{
-#ifndef	CONFIG_SMP
-	sem->count += val;
-#else
-	long temp;
-	__asm__ __volatile__(
-	"1:	ldq_l	%0,%1\n"
-	"	addq	%0,%2,%0\n"
-	"	stq_c	%0,%1\n"
-	"	beq	%0,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (temp), "=m" (sem->count)
-	:"Ir" (val), "m" (sem->count));
-#endif
-}
-
-static inline long rwsem_atomic_update(long val, struct rw_semaphore *sem)
-{
-#ifndef	CONFIG_SMP
-	sem->count += val;
-	return sem->count;
-#else
-	long ret, temp;
-	__asm__ __volatile__(
-	"1:	ldq_l	%0,%1\n"
-	"	addq 	%0,%3,%2\n"
-	"	addq	%0,%3,%0\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	:"=&r" (ret), "=m" (sem->count), "=&r" (temp)
-	:"Ir" (val), "m" (sem->count));
-
-	return ret;
-#endif
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ALPHA_RWSEM_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/scatterlist.h b/ANDROID_3.4.5/arch/alpha/include/asm/scatterlist.h
deleted file mode 100644
index 017d7471..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ALPHA_SCATTERLIST_H
-#define _ALPHA_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_ALPHA_SCATTERLIST_H) */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/sections.h b/ANDROID_3.4.5/arch/alpha/include/asm/sections.h
deleted file mode 100644
index 43b40edd..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ALPHA_SECTIONS_H
-#define _ALPHA_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/segment.h b/ANDROID_3.4.5/arch/alpha/include/asm/segment.h
deleted file mode 100644
index 0453d97d..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/segment.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_SEGMENT_H
-#define __ALPHA_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/sembuf.h b/ANDROID_3.4.5/arch/alpha/include/asm/sembuf.h
deleted file mode 100644
index 7b38b153..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/sembuf.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ALPHA_SEMBUF_H
-#define _ALPHA_SEMBUF_H
-
-/* 
- * The semid64_ds structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _ALPHA_SEMBUF_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/serial.h b/ANDROID_3.4.5/arch/alpha/include/asm/serial.h
deleted file mode 100644
index 9d263e8d..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/serial.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-alpha/serial.h
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/setup.h b/ANDROID_3.4.5/arch/alpha/include/asm/setup.h
deleted file mode 100644
index b50014b3..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/setup.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __ALPHA_SETUP_H
-#define __ALPHA_SETUP_H
-
-#define COMMAND_LINE_SIZE	256
-
-/*
- * We leave one page for the initial stack page, and one page for
- * the initial process structure. Also, the console eats 3 MB for
- * the initial bootloader (one of which we can reclaim later).
- */
-#define BOOT_PCB	0x20000000
-#define BOOT_ADDR	0x20000000
-/* Remove when official MILO sources have ELF support: */
-#define BOOT_SIZE	(16*1024)
-
-#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
-#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
-#else
-#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
-#endif
-
-#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
-#define SWAPPER_PGD	KERNEL_START
-#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
-#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
-#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
-#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
-
-#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
-
-/*
- * This is setup by the secondary bootstrap loader.  Because
- * the zero page is zeroed out as soon as the vm system is
- * initialized, we need to copy things out into a more permanent
- * place.
- */
-#define PARAM			ZERO_PGE
-#define COMMAND_LINE		((char*)(PARAM + 0x0000))
-#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
-#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/sfp-machine.h b/ANDROID_3.4.5/arch/alpha/include/asm/sfp-machine.h
deleted file mode 100644
index 5fe63afb..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/sfp-machine.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* Machine-dependent software floating-point definitions.
-   Alpha kernel version.
-   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson (rth@cygnus.com),
-		  Jakub Jelinek (jakub@redhat.com) and
-		  David S. Miller (davem@redhat.com).
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-   
-#define _FP_W_TYPE_SIZE		64
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define _FP_MUL_MEAT_S(R,X,Y)					\
-  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
-#define _FP_MUL_MEAT_D(R,X,Y)					\
-  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y)					\
-  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
-#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S		_FP_QNANBIT_S
-#define _FP_NANFRAC_D		_FP_QNANBIT_D
-#define _FP_NANFRAC_Q		_FP_QNANBIT_Q
-#define _FP_NANSIGN_S		1
-#define _FP_NANSIGN_D		1
-#define _FP_NANSIGN_Q		1
-
-#define _FP_KEEPNANFRACP 1
-
-/* Alpha Architecture Handbook, 4.7.10.4 sais that
- * we should prefer any type of NaN in Fb, then Fa.
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
-  do {								\
-    R##_s = Y##_s;						\
-    _FP_FRAC_COPY_##wc(R,X);					\
-    R##_c = FP_CLS_NAN;						\
-  } while (0)
-
-/* Obtain the current rounding mode. */
-#define FP_ROUNDMODE	mode
-#define FP_RND_NEAREST	(FPCR_DYN_NORMAL >> FPCR_DYN_SHIFT)
-#define FP_RND_ZERO	(FPCR_DYN_CHOPPED >> FPCR_DYN_SHIFT)
-#define FP_RND_PINF	(FPCR_DYN_PLUS >> FPCR_DYN_SHIFT)
-#define FP_RND_MINF	(FPCR_DYN_MINUS >> FPCR_DYN_SHIFT)
-
-/* Exception flags. */
-#define FP_EX_INVALID		IEEE_TRAP_ENABLE_INV
-#define FP_EX_OVERFLOW		IEEE_TRAP_ENABLE_OVF
-#define FP_EX_UNDERFLOW		IEEE_TRAP_ENABLE_UNF
-#define FP_EX_DIVZERO		IEEE_TRAP_ENABLE_DZE
-#define FP_EX_INEXACT		IEEE_TRAP_ENABLE_INE
-#define FP_EX_DENORM		IEEE_TRAP_ENABLE_DNO
-
-#define FP_DENORM_ZERO		(swcr & IEEE_MAP_DMZ)
-
-/* We write the results always */
-#define FP_INHIBIT_RESULTS 0
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/shmbuf.h b/ANDROID_3.4.5/arch/alpha/include/asm/shmbuf.h
deleted file mode 100644
index 37ee84f0..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/shmbuf.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ALPHA_SHMBUF_H
-#define _ALPHA_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ALPHA_SHMBUF_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/shmparam.h b/ANDROID_3.4.5/arch/alpha/include/asm/shmparam.h
deleted file mode 100644
index cc901d58..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASMAXP_SHMPARAM_H
-#define _ASMAXP_SHMPARAM_H
-
-#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
-
-#endif /* _ASMAXP_SHMPARAM_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/sigcontext.h b/ANDROID_3.4.5/arch/alpha/include/asm/sigcontext.h
deleted file mode 100644
index 323cdb02..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/sigcontext.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASMAXP_SIGCONTEXT_H
-#define _ASMAXP_SIGCONTEXT_H
-
-struct sigcontext {
-	/*
-	 * What should we have here? I'd probably better use the same
-	 * stack layout as OSF/1, just in case we ever want to try
-	 * running their binaries.. 
-	 *
-	 * This is the basic layout, but I don't know if we'll ever
-	 * actually fill in all the values..
-	 */
-	 long		sc_onstack;
-	 long		sc_mask;
-	 long		sc_pc;
-	 long		sc_ps;
-	 long		sc_regs[32];
-	 long		sc_ownedfp;
-	 long		sc_fpregs[32];
-	 unsigned long	sc_fpcr;
-	 unsigned long	sc_fp_control;
-	 unsigned long	sc_reserved1, sc_reserved2;
-	 unsigned long	sc_ssize;
-	 char *		sc_sbase;
-	 unsigned long	sc_traparg_a0;
-	 unsigned long	sc_traparg_a1;
-	 unsigned long	sc_traparg_a2;
-	 unsigned long	sc_fp_trap_pc;
-	 unsigned long	sc_fp_trigger_sum;
-	 unsigned long	sc_fp_trigger_inst;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/siginfo.h b/ANDROID_3.4.5/arch/alpha/include/asm/siginfo.h
deleted file mode 100644
index 9822362a..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/siginfo.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ALPHA_SIGINFO_H
-#define _ALPHA_SIGINFO_H
-
-#define __ARCH_SI_PREAMBLE_SIZE		(4 * sizeof(int))
-#define __ARCH_SI_TRAPNO
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/signal.h b/ANDROID_3.4.5/arch/alpha/include/asm/signal.h
deleted file mode 100644
index a9388300..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/signal.h
+++ /dev/null
@@ -1,172 +0,0 @@
-#ifndef _ASMAXP_SIGNAL_H
-#define _ASMAXP_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Digital Unix defines 64 signals.  Most things should be clean enough
-   to redefine this at will, if care is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	64
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-
-/*
- * Linux/AXP has different signal numbers that Linux/i386: I'm trying
- * to make it OSF/1 binary compatible, at least for normal binaries.
- */
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGEMT		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGBUS		10
-#define SIGSEGV		11
-#define SIGSYS		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGURG		16
-#define SIGSTOP		17
-#define SIGTSTP		18
-#define SIGCONT		19
-#define SIGCHLD		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGIO		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGINFO		29
-#define SIGUSR1		30
-#define SIGUSR2		31
-
-#define SIGPOLL	SIGIO
-#define SIGPWR	SIGINFO
-#define SIGIOT	SIGABRT
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-
-#define SA_ONSTACK	0x00000001
-#define SA_RESTART	0x00000002
-#define SA_NOCLDSTOP	0x00000004
-#define SA_NODEFER	0x00000008
-#define SA_RESETHAND	0x00000010
-#define SA_NOCLDWAIT	0x00000020
-#define SA_SIGINFO	0x00000040
-
-#define SA_ONESHOT	SA_RESETHAND
-#define SA_NOMASK	SA_NODEFER
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	4096
-#define SIGSTKSZ	16384
-
-#define SIG_BLOCK          1	/* for blocking signals */
-#define SIG_UNBLOCK        2	/* for unblocking signals */
-#define SIG_SETMASK        3	/* for setting the signal mask */
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
-struct osf_sigaction {
-	__sighandler_t	sa_handler;
-	old_sigset_t	sa_mask;
-	int		sa_flags;
-};
-
-struct sigaction {
-	__sighandler_t	sa_handler;
-	unsigned long	sa_flags;
-	sigset_t	sa_mask;	/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-	__sigrestore_t ka_restorer;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t	_sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t	sa_mask;
-	int		sa_flags;
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-/* sigstack(2) is deprecated, and will be withdrawn in a future version
-   of the X/Open CAE Specification.  Use sigaltstack instead.  It is only
-   implemented here for OSF/1 compatibility.  */
-
-struct sigstack {
-	void __user *ss_sp;
-	int ss_onstack;
-};
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/smp.h b/ANDROID_3.4.5/arch/alpha/include/asm/smp.h
deleted file mode 100644
index c46e714a..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/smp.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __ASM_SMP_H
-#define __ASM_SMP_H
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
-#include <asm/pal.h>
-
-/* HACK: Cabrio WHAMI return value is bogus if more than 8 bits used.. :-( */
-
-static __inline__ unsigned char
-__hard_smp_processor_id(void)
-{
-	register unsigned char __r0 __asm__("$0");
-	__asm__ __volatile__(
-		"call_pal %1 #whami"
-		: "=r"(__r0)
-		:"i" (PAL_whami)
-		: "$1", "$22", "$23", "$24", "$25");
-	return __r0;
-}
-
-#ifdef CONFIG_SMP
-
-#include <asm/irq.h>
-
-struct cpuinfo_alpha {
-	unsigned long loops_per_jiffy;
-	unsigned long last_asn;
-	int need_new_asn;
-	int asn_lock;
-	unsigned long ipi_count;
-	unsigned long prof_multiplier;
-	unsigned long prof_counter;
-	unsigned char mcheck_expected;
-	unsigned char mcheck_taken;
-	unsigned char mcheck_extra;
-} __attribute__((aligned(64)));
-
-extern struct cpuinfo_alpha cpu_data[NR_CPUS];
-
-#define hard_smp_processor_id()	__hard_smp_processor_id()
-#define raw_smp_processor_id()	(current_thread_info()->cpu)
-
-extern int smp_num_cpus;
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-
-#else /* CONFIG_SMP */
-
-#define hard_smp_processor_id()		0
-#define smp_call_function_on_cpu(func,info,wait,cpu)    ({ 0; })
-
-#endif /* CONFIG_SMP */
-
-#define NO_PROC_ID	(-1)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/socket.h b/ANDROID_3.4.5/arch/alpha/include/asm/socket.h
deleted file mode 100644
index dcb221a4..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/socket.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-/*
- * Note: we only bother about making the SOL_SOCKET options
- * same as OSF/1, as that's all that "normal" programs are
- * likely to set.  We don't necessarily want to be binary
- * compatible with _everything_. 
- */
-#define SOL_SOCKET	0xffff
-
-#define SO_DEBUG	0x0001
-#define SO_REUSEADDR	0x0004
-#define SO_KEEPALIVE	0x0008
-#define SO_DONTROUTE	0x0010
-#define SO_BROADCAST	0x0020
-#define SO_LINGER	0x0080
-#define SO_OOBINLINE	0x0100
-/* To add :#define SO_REUSEPORT 0x0200 */
-
-#define SO_TYPE		0x1008
-#define SO_ERROR	0x1007
-#define SO_SNDBUF	0x1001
-#define SO_RCVBUF	0x1002
-#define SO_SNDBUFFORCE	0x100a
-#define SO_RCVBUFFORCE	0x100b
-#define	SO_RCVLOWAT	0x1010
-#define	SO_SNDLOWAT	0x1011
-#define	SO_RCVTIMEO	0x1012
-#define	SO_SNDTIMEO	0x1013
-#define SO_ACCEPTCONN	0x1014
-#define SO_PROTOCOL	0x1028
-#define SO_DOMAIN	0x1029
-
-/* linux-specific, might as well be the same as on i386 */
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_BSDCOMPAT	14
-
-#define SO_PASSCRED	17
-#define SO_PEERCRED	18
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_PEERSEC		30
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		19
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	20
-#define SO_SECURITY_ENCRYPTION_NETWORK		21
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
- * have to define SOCK_NONBLOCK to a different value here.
- */
-#define SOCK_NONBLOCK	0x40000000
-
-#endif /* _ASM_SOCKET_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/sockios.h b/ANDROID_3.4.5/arch/alpha/include/asm/sockios.h
deleted file mode 100644
index 7932c7ab..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/sockios.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_ALPHA_SOCKIOS_H
-#define _ASM_ALPHA_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-
-#define FIOGETOWN	_IOR('f', 123, int)
-#define FIOSETOWN 	_IOW('f', 124, int)
-
-#define SIOCATMARK	_IOR('s', 7, int)
-#define SIOCSPGRP	_IOW('s', 8, pid_t)
-#define SIOCGPGRP	_IOR('s', 9, pid_t)
-
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* _ASM_ALPHA_SOCKIOS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/special_insns.h b/ANDROID_3.4.5/arch/alpha/include/asm/special_insns.h
deleted file mode 100644
index 88d3452b..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/special_insns.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __ALPHA_SPECIAL_INSNS_H
-#define __ALPHA_SPECIAL_INSNS_H
-
-enum implver_enum {
-	IMPLVER_EV4,
-	IMPLVER_EV5,
-	IMPLVER_EV6
-};
-
-#ifdef CONFIG_ALPHA_GENERIC
-#define implver()				\
-({ unsigned long __implver;			\
-   __asm__ ("implver %0" : "=r"(__implver));	\
-   (enum implver_enum) __implver; })
-#else
-/* Try to eliminate some dead code.  */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
-#define implver() IMPLVER_EV5
-#endif
-#if defined(CONFIG_ALPHA_EV6)
-#define implver() IMPLVER_EV6
-#endif
-#endif
-
-enum amask_enum {
-	AMASK_BWX = (1UL << 0),
-	AMASK_FIX = (1UL << 1),
-	AMASK_CIX = (1UL << 2),
-	AMASK_MAX = (1UL << 8),
-	AMASK_PRECISE_TRAP = (1UL << 9),
-};
-
-#define amask(mask)						\
-({ unsigned long __amask, __input = (mask);			\
-   __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input));	\
-   __amask; })
-
-#endif /* __ALPHA_SPECIAL_INSNS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/spinlock.h b/ANDROID_3.4.5/arch/alpha/include/asm/spinlock.h
deleted file mode 100644
index 3bba21e4..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/spinlock.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef _ALPHA_SPINLOCK_H
-#define _ALPHA_SPINLOCK_H
-
-#include <linux/kernel.h>
-#include <asm/current.h>
-
-/*
- * Simple spin lock operations.  There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- */
-
-#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
-#define arch_spin_is_locked(x)	((x)->lock != 0)
-#define arch_spin_unlock_wait(x) \
-		do { cpu_relax(); } while ((x)->lock)
-
-static inline void arch_spin_unlock(arch_spinlock_t * lock)
-{
-	mb();
-	lock->lock = 0;
-}
-
-static inline void arch_spin_lock(arch_spinlock_t * lock)
-{
-	long tmp;
-
-	__asm__ __volatile__(
-	"1:	ldl_l	%0,%1\n"
-	"	bne	%0,2f\n"
-	"	lda	%0,1\n"
-	"	stl_c	%0,%1\n"
-	"	beq	%0,2f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"2:	ldl	%0,%1\n"
-	"	bne	%0,2b\n"
-	"	br	1b\n"
-	".previous"
-	: "=&r" (tmp), "=m" (lock->lock)
-	: "m"(lock->lock) : "memory");
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
-	return !test_and_set_bit(0, &lock->lock);
-}
-
-/***********************************************************/
-
-static inline int arch_read_can_lock(arch_rwlock_t *lock)
-{
-	return (lock->lock & 1) == 0;
-}
-
-static inline int arch_write_can_lock(arch_rwlock_t *lock)
-{
-	return lock->lock == 0;
-}
-
-static inline void arch_read_lock(arch_rwlock_t *lock)
-{
-	long regx;
-
-	__asm__ __volatile__(
-	"1:	ldl_l	%1,%0\n"
-	"	blbs	%1,6f\n"
-	"	subl	%1,2,%1\n"
-	"	stl_c	%1,%0\n"
-	"	beq	%1,6f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"6:	ldl	%1,%0\n"
-	"	blbs	%1,6b\n"
-	"	br	1b\n"
-	".previous"
-	: "=m" (*lock), "=&r" (regx)
-	: "m" (*lock) : "memory");
-}
-
-static inline void arch_write_lock(arch_rwlock_t *lock)
-{
-	long regx;
-
-	__asm__ __volatile__(
-	"1:	ldl_l	%1,%0\n"
-	"	bne	%1,6f\n"
-	"	lda	%1,1\n"
-	"	stl_c	%1,%0\n"
-	"	beq	%1,6f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"6:	ldl	%1,%0\n"
-	"	bne	%1,6b\n"
-	"	br	1b\n"
-	".previous"
-	: "=m" (*lock), "=&r" (regx)
-	: "m" (*lock) : "memory");
-}
-
-static inline int arch_read_trylock(arch_rwlock_t * lock)
-{
-	long regx;
-	int success;
-
-	__asm__ __volatile__(
-	"1:	ldl_l	%1,%0\n"
-	"	lda	%2,0\n"
-	"	blbs	%1,2f\n"
-	"	subl	%1,2,%2\n"
-	"	stl_c	%2,%0\n"
-	"	beq	%2,6f\n"
-	"2:	mb\n"
-	".subsection 2\n"
-	"6:	br	1b\n"
-	".previous"
-	: "=m" (*lock), "=&r" (regx), "=&r" (success)
-	: "m" (*lock) : "memory");
-
-	return success;
-}
-
-static inline int arch_write_trylock(arch_rwlock_t * lock)
-{
-	long regx;
-	int success;
-
-	__asm__ __volatile__(
-	"1:	ldl_l	%1,%0\n"
-	"	lda	%2,0\n"
-	"	bne	%1,2f\n"
-	"	lda	%2,1\n"
-	"	stl_c	%2,%0\n"
-	"	beq	%2,6f\n"
-	"2:	mb\n"
-	".subsection 2\n"
-	"6:	br	1b\n"
-	".previous"
-	: "=m" (*lock), "=&r" (regx), "=&r" (success)
-	: "m" (*lock) : "memory");
-
-	return success;
-}
-
-static inline void arch_read_unlock(arch_rwlock_t * lock)
-{
-	long regx;
-	__asm__ __volatile__(
-	"	mb\n"
-	"1:	ldl_l	%1,%0\n"
-	"	addl	%1,2,%1\n"
-	"	stl_c	%1,%0\n"
-	"	beq	%1,6f\n"
-	".subsection 2\n"
-	"6:	br	1b\n"
-	".previous"
-	: "=m" (*lock), "=&r" (regx)
-	: "m" (*lock) : "memory");
-}
-
-static inline void arch_write_unlock(arch_rwlock_t * lock)
-{
-	mb();
-	lock->lock = 0;
-}
-
-#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
-#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
-
-#define arch_spin_relax(lock)	cpu_relax()
-#define arch_read_relax(lock)	cpu_relax()
-#define arch_write_relax(lock)	cpu_relax()
-
-#endif /* _ALPHA_SPINLOCK_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/spinlock_types.h b/ANDROID_3.4.5/arch/alpha/include/asm/spinlock_types.h
deleted file mode 100644
index 54c2afce..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ALPHA_SPINLOCK_TYPES_H
-#define _ALPHA_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int lock;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int lock;
-} arch_rwlock_t;
-
-#define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/stat.h b/ANDROID_3.4.5/arch/alpha/include/asm/stat.h
deleted file mode 100644
index 07ad3e6b..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/stat.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _ALPHA_STAT_H
-#define _ALPHA_STAT_H
-
-struct stat {
-	unsigned int	st_dev;
-	unsigned int	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	st_rdev;
-	long		st_size;
-	unsigned long	st_atime;
-	unsigned long	st_mtime;
-	unsigned long	st_ctime;
-	unsigned int	st_blksize;
-	unsigned int	st_blocks;
-	unsigned int	st_flags;
-	unsigned int	st_gen;
-};
-
-/* The stat64 structure increases the size of dev_t, blkcnt_t, adds
-   nanosecond resolution times, and padding for expansion.  */
-
-struct stat64 {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned long	st_rdev;
-	long		st_size;
-	unsigned long	st_blocks;
-
-	unsigned int	st_mode;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	st_blksize;
-	unsigned int	st_nlink;
-	unsigned int	__pad0;
-
-	unsigned long	st_atime;
-	unsigned long 	st_atime_nsec; 
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-	unsigned long	st_ctime;
-	unsigned long   st_ctime_nsec;
-  	long		__unused[3];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/statfs.h b/ANDROID_3.4.5/arch/alpha/include/asm/statfs.h
deleted file mode 100644
index ccd2e186..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/statfs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ALPHA_STATFS_H
-#define _ALPHA_STATFS_H
-
-#include <linux/types.h>
-
-/* Alpha is the only 64-bit platform with 32-bit statfs. And doesn't
-   even seem to implement statfs64 */
-#define __statfs_word __u32
-
-#include <asm-generic/statfs.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/string.h b/ANDROID_3.4.5/arch/alpha/include/asm/string.h
deleted file mode 100644
index b02b8a28..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/string.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef __ALPHA_STRING_H__
-#define __ALPHA_STRING_H__
-
-#ifdef __KERNEL__
-
-/*
- * GCC of any recent vintage doesn't do stupid things with bcopy.
- * EGCS 1.1 knows all about expanding memcpy inline, others don't.
- *
- * Similarly for a memset with data = 0.
- */
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, size_t);
-#define __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, size_t);
-
-/* For backward compatibility with modules.  Unused otherwise.  */
-extern void * __memcpy(void *, const void *, size_t);
-
-#define memcpy __builtin_memcpy
-
-#define __HAVE_ARCH_MEMSET
-extern void * __constant_c_memset(void *, unsigned long, size_t);
-extern void * __memset(void *, int, size_t);
-extern void * memset(void *, int, size_t);
-
-#define memset(s, c, n)							    \
-(__builtin_constant_p(c)						    \
- ? (__builtin_constant_p(n) && (c) == 0					    \
-    ? __builtin_memset((s),0,(n)) 					    \
-    : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \
- : __memset((s),(c),(n)))
-
-#define __HAVE_ARCH_STRCPY
-extern char * strcpy(char *,const char *);
-#define __HAVE_ARCH_STRNCPY
-extern char * strncpy(char *, const char *, size_t);
-#define __HAVE_ARCH_STRCAT
-extern char * strcat(char *, const char *);
-#define __HAVE_ARCH_STRNCAT
-extern char * strncat(char *, const char *, size_t);
-#define __HAVE_ARCH_STRCHR
-extern char * strchr(const char *,int);
-#define __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char *,int);
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-#define __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, size_t);
-
-/* The following routine is like memset except that it writes 16-bit
-   aligned values.  The DEST and COUNT parameters must be even for 
-   correct operation.  */
-
-#define __HAVE_ARCH_MEMSETW
-extern void * __memsetw(void *dest, unsigned short, size_t count);
-
-#define memsetw(s, c, n)						 \
-(__builtin_constant_p(c)						 \
- ? __constant_c_memset((s),0x0001000100010001UL*(unsigned short)(c),(n)) \
- : __memsetw((s),(c),(n)))
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_STRING_H__ */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/swab.h b/ANDROID_3.4.5/arch/alpha/include/asm/swab.h
deleted file mode 100644
index 4d682b16..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/swab.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ALPHA_SWAB_H
-#define _ALPHA_SWAB_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/compiler.h>
-
-#ifdef __GNUC__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
-	/*
-	 * Unfortunately, we can't use the 6 instruction sequence
-	 * on ev6 since the latency of the UNPKBW is 3, which is
-	 * pretty hard to hide.  Just in case a future implementation
-	 * has a lower latency, here's the sequence (also by Mike Burrows)
-	 *
-	 * UNPKBW a0, v0       v0: 00AA00BB00CC00DD
-	 * SLL v0, 24, a0      a0: BB00CC00DD000000
-	 * BIS v0, a0, a0      a0: BBAACCBBDDCC00DD
-	 * EXTWL a0, 6, v0     v0: 000000000000BBAA
-	 * ZAP a0, 0xf3, a0    a0: 00000000DDCC0000
-	 * ADDL a0, v0, v0     v0: ssssssssDDCCBBAA
-	 */
-
-	__u64 t0, t1, t2, t3;
-
-	t0 = __kernel_inslh(x, 7);	/* t0 : 0000000000AABBCC */
-	t1 = __kernel_inswl(x, 3);	/* t1 : 000000CCDD000000 */
-	t1 |= t0;			/* t1 : 000000CCDDAABBCC */
-	t2 = t1 >> 16;			/* t2 : 0000000000CCDDAA */
-	t0 = t1 & 0xFF00FF00;		/* t0 : 00000000DD00BB00 */
-	t3 = t2 & 0x00FF00FF;		/* t3 : 0000000000CC00AA */
-	t1 = t0 + t3;			/* t1 : ssssssssDDCCBBAA */
-
-	return t1;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif /* __GNUC__ */
-
-#endif /* _ALPHA_SWAB_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/switch_to.h b/ANDROID_3.4.5/arch/alpha/include/asm/switch_to.h
deleted file mode 100644
index 44c0d4f2..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/switch_to.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ALPHA_SWITCH_TO_H
-#define __ALPHA_SWITCH_TO_H
-
-
-struct task_struct;
-extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct *);
-
-#define switch_to(P,N,L)						 \
-  do {									 \
-    (L) = alpha_switch_to(virt_to_phys(&task_thread_info(N)->pcb), (P)); \
-    check_mmu_context();						 \
-  } while (0)
-
-#endif /* __ALPHA_SWITCH_TO_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/sysinfo.h b/ANDROID_3.4.5/arch/alpha/include/asm/sysinfo.h
deleted file mode 100644
index e77d77cd..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/sysinfo.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-alpha/sysinfo.h
- */
-
-#ifndef __ASM_ALPHA_SYSINFO_H
-#define __ASM_ALPHA_SYSINFO_H
-
-/* This defines the subset of the OSF/1 getsysinfo/setsysinfo calls
-   that we support.  */
-
-#define GSI_UACPROC			8
-#define GSI_IEEE_FP_CONTROL		45
-#define GSI_IEEE_STATE_AT_SIGNAL	46
-#define GSI_PROC_TYPE			60
-#define GSI_GET_HWRPB			101
-
-#define SSI_NVPAIRS			1
-#define SSI_IEEE_FP_CONTROL		14
-#define SSI_IEEE_STATE_AT_SIGNAL	15
-#define SSI_IEEE_IGNORE_STATE_AT_SIGNAL	16
-#define SSI_IEEE_RAISE_EXCEPTION	1001	/* linux specific */
-
-#define SSIN_UACPROC			6
-
-#define UAC_BITMASK			7
-#define UAC_NOPRINT			1
-#define UAC_NOFIX			2
-#define UAC_SIGBUS			4
-
-#endif /* __ASM_ALPHA_SYSINFO_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/termbits.h b/ANDROID_3.4.5/arch/alpha/include/asm/termbits.h
deleted file mode 100644
index 879dd358..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/termbits.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef _ALPHA_TERMBITS_H
-#define _ALPHA_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-/*
- * termios type and macro definitions.  Be careful about adding stuff
- * to this file since it's used in GNU libc and there are strict rules
- * concerning namespace pollution.
- */
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t c_line;			/* line discipline (== c_cc[19]) */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* Alpha has matching termios and ktermios */
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t c_line;			/* line discipline (== c_cc[19]) */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VEOF 0
-#define VEOL 1
-#define VEOL2 2
-#define VERASE 3
-#define VWERASE 4
-#define VKILL 5
-#define VREPRINT 6
-#define VSWTC 7
-#define VINTR 8
-#define VQUIT 9
-#define VSUSP 10
-#define VSTART 12
-#define VSTOP 13
-#define VLNEXT 14
-#define VDISCARD 15
-#define VMIN 16
-#define VTIME 17
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IXON	0001000
-#define IXOFF	0002000
-#define IXANY	0004000
-#define IUCLC	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define ONLCR	0000002
-#define OLCUC	0000004
-
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-
-#define OFILL	00000100
-#define OFDEL	00000200
-#define NLDLY	00001400
-#define   NL0	00000000
-#define   NL1	00000400
-#define   NL2	00001000
-#define   NL3	00001400
-#define TABDLY	00006000
-#define   TAB0	00000000
-#define   TAB1	00002000
-#define   TAB2	00004000
-#define   TAB3	00006000
-#define CRDLY	00030000
-#define   CR0	00000000
-#define   CR1	00010000
-#define   CR2	00020000
-#define   CR3	00030000
-#define FFDLY	00040000
-#define   FF0	00000000
-#define   FF1	00040000
-#define BSDLY	00100000
-#define   BS0	00000000
-#define   BS1	00100000
-#define VTDLY	00200000
-#define   VT0	00000000
-#define   VT1	00200000
-#define XTABS	01000000 /* Hmm.. Linux/i386 considers this part of TABDLY.. */
-
-/* c_cflag bit meaning */
-#define CBAUD	0000037
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CBAUDEX 0000000
-#define  B57600   00020
-#define  B115200  00021
-#define  B230400  00022
-#define  B460800  00023
-#define  B500000  00024
-#define  B576000  00025
-#define  B921600  00026
-#define B1000000  00027
-#define B1152000  00030
-#define B1500000  00031
-#define B2000000  00032
-#define B2500000  00033
-#define B3000000  00034
-#define B3500000  00035
-#define B4000000  00036
-
-#define CSIZE	00001400
-#define   CS5	00000000
-#define   CS6	00000400
-#define   CS7	00001000
-#define   CS8	00001400
-
-#define CSTOPB	00002000
-#define CREAD	00004000
-#define PARENB	00010000
-#define PARODD	00020000
-#define HUPCL	00040000
-
-#define CLOCAL	00100000
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-/* c_lflag bits */
-#define ISIG	0x00000080
-#define ICANON	0x00000100
-#define XCASE	0x00004000
-#define ECHO	0x00000008
-#define ECHOE	0x00000002
-#define ECHOK	0x00000004
-#define ECHONL	0x00000010
-#define NOFLSH	0x80000000
-#define TOSTOP	0x00400000
-#define ECHOCTL	0x00000040
-#define ECHOPRT	0x00000020
-#define ECHOKE	0x00000001
-#define FLUSHO	0x00800000
-#define PENDIN	0x20000000
-#define IEXTEN	0x00000400
-#define EXTPROC	0x10000000
-
-/* Values for the ACTION argument to `tcflow'.  */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* _ALPHA_TERMBITS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/termios.h b/ANDROID_3.4.5/arch/alpha/include/asm/termios.h
deleted file mode 100644
index fa13716a..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/termios.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef _ALPHA_TERMIOS_H
-#define _ALPHA_TERMIOS_H
-
-#include <asm/ioctls.h>
-#include <asm/termbits.h>
-
-struct sgttyb {
-	char	sg_ispeed;
-	char	sg_ospeed;
-	char	sg_erase;
-	char	sg_kill;
-	short	sg_flags;
-};
-
-struct tchars {
-	char	t_intrc;
-	char	t_quitc;
-	char	t_startc;
-	char	t_stopc;
-	char	t_eofc;
-	char	t_brkc;
-};
-
-struct ltchars {
-	char	t_suspc;
-	char	t_dsuspc;
-	char	t_rprntc;
-	char	t_flushc;
-	char	t_werasc;
-	char	t_lnextc;
-};
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/*
- * c_cc characters in the termio structure.  Oh, how I love being
- * backwardly compatible.  Notice that character 4 and 5 are
- * interpreted differently depending on whether ICANON is set in
- * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
- * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
- * is compatible with sysV)...
- */
-#define _VINTR	0
-#define _VQUIT	1
-#define _VERASE	2
-#define _VKILL	3
-#define _VEOF	4
-#define _VMIN	4
-#define _VEOL	5
-#define _VTIME	5
-#define _VEOL2	6
-#define _VSWTC	7
-
-#ifdef __KERNEL__
-/*	eof=^D		eol=\0		eol2=\0		erase=del
-	werase=^W	kill=^U		reprint=^R	sxtc=\0
-	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
-	start=^Q	stop=^S		lnext=^V	discard=^U
-	vmin=\1		vtime=\0
-*/
-#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-
-#define user_termio_to_kernel_termios(a_termios, u_termio)			\
-({										\
-	struct ktermios *k_termios = (a_termios);				\
-	struct termio k_termio;							\
-	int canon, ret;								\
-										\
-	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
-	if (!ret) {								\
-		/* Overwrite only the low bits.  */				\
-		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
-		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
-		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
-		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
-		canon = k_termio.c_lflag & ICANON;				\
-										\
-		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
-		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
-		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
-		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
-		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
-		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
-		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
-		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
-	}									\
-	ret;									\
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(u_termio, a_termios)		\
-({									\
-	struct ktermios *k_termios = (a_termios);			\
-	struct termio k_termio;						\
-	int canon;							\
-									\
-	k_termio.c_iflag = k_termios->c_iflag;				\
-	k_termio.c_oflag = k_termios->c_oflag;				\
-	k_termio.c_cflag = k_termios->c_cflag;				\
-	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
-									\
-	k_termio.c_line = k_termios->c_line;				\
-	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
-	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
-	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
-	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
-	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
-	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
-	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
-	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
-									\
-	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _ALPHA_TERMIOS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/thread_info.h b/ANDROID_3.4.5/arch/alpha/include/asm/thread_info.h
deleted file mode 100644
index 28335bd4..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/thread_info.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _ALPHA_THREAD_INFO_H
-#define _ALPHA_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <asm/types.h>
-#include <asm/hwrpb.h>
-#endif
-
-#ifndef __ASSEMBLY__
-struct thread_info {
-	struct pcb_struct	pcb;		/* palcode state */
-
-	struct task_struct	*task;		/* main task structure */
-	unsigned int		flags;		/* low level flags */
-	unsigned int		ieee_state;	/* see fpu.h */
-
-	struct exec_domain	*exec_domain;	/* execution domain */
-	mm_segment_t		addr_limit;	/* thread address space */
-	unsigned		cpu;		/* current CPU */
-	int			preempt_count; /* 0 => preemptable, <0 => BUG */
-
-	int bpt_nsaved;
-	unsigned long bpt_addr[2];		/* breakpoint handling  */
-	unsigned int bpt_insn[2];
-
-	struct restart_block	restart_block;
-};
-
-/*
- * Macros/functions for gaining access to the thread information structure.
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= INIT_PREEMPT_COUNT,	\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* How to get the thread information struct from C.  */
-register struct thread_info *__current_thread_info __asm__("$8");
-#define current_thread_info()  __current_thread_info
-
-#endif /* __ASSEMBLY__ */
-
-/* Thread information allocation.  */
-#define THREAD_SIZE_ORDER 1
-#define THREAD_SIZE (2*PAGE_SIZE)
-
-#define PREEMPT_ACTIVE		0x40000000
-
-/*
- * Thread information flags:
- * - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first and must be assigned to be
- *   within bits 0 to 7 to fit in and immediate operand.
- * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
- *   control flags.
- *
- * TIF_SYSCALL_TRACE is known to be 0 via blbs.
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	8	/* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		10	/* ! Preserve sequence of following */
-#define TIF_UAC_NOFIX		11	/* ! flags as they match            */
-#define TIF_UAC_SIGBUS		12	/* ! userspace part of 'osf_sysinfo' */
-#define TIF_MEMDIE		13	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
-
-/* Work to do on interrupt/exception return.  */
-#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
-
-/* Work to do on any return to userspace.  */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
-				 | _TIF_SYSCALL_TRACE)
-
-#define ALPHA_UAC_SHIFT		TIF_UAC_NOPRINT
-#define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
-				 1 << TIF_UAC_SIGBUS)
-
-#define SET_UNALIGN_CTL(task,value)	({				     \
-	task_thread_info(task)->flags = ((task_thread_info(task)->flags &    \
-		~ALPHA_UAC_MASK)					     \
-		| (((value) << ALPHA_UAC_SHIFT)       & (1<<TIF_UAC_NOPRINT))\
-		| (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
-		| (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
-	0; })
-
-#define GET_UNALIGN_CTL(task,value)	({				\
-	put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
-		  >> ALPHA_UAC_SHIFT					\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
-		 >> (ALPHA_UAC_SHIFT + 1)				\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
-		 >> (ALPHA_UAC_SHIFT - 1),				\
-		 (int __user *)(value));				\
-	})
-
-#endif /* __KERNEL__ */
-#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/timex.h b/ANDROID_3.4.5/arch/alpha/include/asm/timex.h
deleted file mode 100644
index afa0c45e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/timex.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/include/asm-alpha/timex.h
- *
- * ALPHA architecture timex specifications
- */
-#ifndef _ASMALPHA_TIMEX_H
-#define _ASMALPHA_TIMEX_H
-
-/* With only one or two oddballs, we use the RTC as the ticker, selecting
-   the 32.768kHz reference clock, which nicely divides down to our HZ.  */
-#define CLOCK_TICK_RATE	32768
-
-/*
- * Standard way to access the cycle counter.
- * Currently only used on SMP for scheduling.
- *
- * Only the low 32 bits are available as a continuously counting entity. 
- * But this only means we'll force a reschedule every 8 seconds or so,
- * which isn't an evil thing.
- */
-
-typedef unsigned int cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-	cycles_t ret;
-	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
-	return ret;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/tlb.h b/ANDROID_3.4.5/arch/alpha/include/asm/tlb.h
deleted file mode 100644
index 42866759..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/tlb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ALPHA_TLB_H
-#define _ALPHA_TLB_H
-
-#define tlb_start_vma(tlb, vma)			do { } while (0)
-#define tlb_end_vma(tlb, vma)			do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, pte, addr)	do { } while (0)
-
-#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
- 
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/tlbflush.h b/ANDROID_3.4.5/arch/alpha/include/asm/tlbflush.h
deleted file mode 100644
index e89e0c2e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/tlbflush.h
+++ /dev/null
@@ -1,152 +0,0 @@
-#ifndef _ALPHA_TLBFLUSH_H
-#define _ALPHA_TLBFLUSH_H
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <asm/compiler.h>
-#include <asm/pgalloc.h>
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __MMU_EXTERN_INLINE
-#endif
-
-extern void __load_new_mm_context(struct mm_struct *);
-
-
-/* Use a few helper functions to hide the ugly broken ASN
-   numbers on early Alphas (ev4 and ev45).  */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
-	__load_new_mm_context(mm);
-	tbiap();
-}
-
-__EXTERN_INLINE void
-ev5_flush_tlb_current(struct mm_struct *mm)
-{
-	__load_new_mm_context(mm);
-}
-
-/* Flush just one page in the current TLB set.  We need to be very
-   careful about the icache here, there is no way to invalidate a
-   specific icache page.  */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
-			   struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	int tbi_flag = 2;
-	if (vma->vm_flags & VM_EXEC) {
-		__load_new_mm_context(mm);
-		tbi_flag = 3;
-	}
-	tbi(tbi_flag, addr);
-}
-
-__EXTERN_INLINE void
-ev5_flush_tlb_current_page(struct mm_struct * mm,
-			   struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	if (vma->vm_flags & VM_EXEC)
-		__load_new_mm_context(mm);
-	else
-		tbi(2, addr);
-}
-
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define flush_tlb_current		ev4_flush_tlb_current
-#  define flush_tlb_current_page	ev4_flush_tlb_current_page
-# else
-#  define flush_tlb_current		ev5_flush_tlb_current
-#  define flush_tlb_current_page	ev5_flush_tlb_current_page
-# endif
-#endif
-
-#ifdef __MMU_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __MMU_EXTERN_INLINE
-#endif
-
-/* Flush current user mapping.  */
-static inline void
-flush_tlb(void)
-{
-	flush_tlb_current(current->active_mm);
-}
-
-/* Flush someone else's user mapping.  */
-static inline void
-flush_tlb_other(struct mm_struct *mm)
-{
-	unsigned long *mmc = &mm->context[smp_processor_id()];
-	/* Check it's not zero first to avoid cacheline ping pong
-	   when possible.  */
-	if (*mmc) *mmc = 0;
-}
-
-#ifndef CONFIG_SMP
-/* Flush everything (kernel mapping may also have changed
-   due to vmalloc/vfree).  */
-static inline void flush_tlb_all(void)
-{
-	tbia();
-}
-
-/* Flush a specified user mapping.  */
-static inline void
-flush_tlb_mm(struct mm_struct *mm)
-{
-	if (mm == current->active_mm)
-		flush_tlb_current(mm);
-	else
-		flush_tlb_other(mm);
-}
-
-/* Page-granular tlb flush.  */
-static inline void
-flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	if (mm == current->active_mm)
-		flush_tlb_current_page(mm, vma, addr);
-	else
-		flush_tlb_other(mm);
-}
-
-/* Flush a specified range of user mapping.  On the Alpha we flush
-   the whole user tlb.  */
-static inline void
-flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		unsigned long end)
-{
-	flush_tlb_mm(vma->vm_mm);
-}
-
-#else /* CONFIG_SMP */
-
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *);
-extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
-extern void flush_tlb_range(struct vm_area_struct *, unsigned long,
-			    unsigned long);
-
-#endif /* CONFIG_SMP */
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					unsigned long end)
-{
-	flush_tlb_all();
-}
-
-#endif /* _ALPHA_TLBFLUSH_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/topology.h b/ANDROID_3.4.5/arch/alpha/include/asm/topology.h
deleted file mode 100644
index 9251e13e..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/topology.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _ASM_ALPHA_TOPOLOGY_H
-#define _ASM_ALPHA_TOPOLOGY_H
-
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_NUMA
-static inline int cpu_to_node(int cpu)
-{
-	int node;
-	
-	if (!alpha_mv.cpuid_to_nid)
-		return 0;
-
-	node = alpha_mv.cpuid_to_nid(cpu);
-
-#ifdef DEBUG_NUMA
-	BUG_ON(node < 0);
-#endif
-
-	return node;
-}
-
-extern struct cpumask node_to_cpumask_map[];
-/* FIXME: This is dumb, recalculating every time.  But simple. */
-static const struct cpumask *cpumask_of_node(int node)
-{
-	int cpu;
-
-	if (node == -1)
-		return cpu_all_mask;
-
-	cpumask_clear(&node_to_cpumask_map[node]);
-
-	for_each_online_cpu(cpu) {
-		if (cpu_to_node(cpu) == node)
-			cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
-	}
-
-	return &node_to_cpumask_map[node];
-}
-
-#define cpumask_of_pcibus(bus)	(cpu_online_mask)
-
-#endif /* !CONFIG_NUMA */
-# include <asm-generic/topology.h>
-
-#endif /* _ASM_ALPHA_TOPOLOGY_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/types.h b/ANDROID_3.4.5/arch/alpha/include/asm/types.h
deleted file mode 100644
index 0a057907..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/types.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ALPHA_TYPES_H
-#define _ALPHA_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#ifdef __KERNEL__
-#include <asm-generic/int-ll64.h>
-#else
-#include <asm-generic/int-l64.h>
-#endif
-
-#endif /* _ALPHA_TYPES_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/uaccess.h b/ANDROID_3.4.5/arch/alpha/include/asm/uaccess.h
deleted file mode 100644
index b49ec2f8..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/uaccess.h
+++ /dev/null
@@ -1,513 +0,0 @@
-#ifndef __ALPHA_UACCESS_H
-#define __ALPHA_UACCESS_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * Or at least it did once upon a time.  Nowadays it is a mask that
- * defines which bits of the address space are off limits.  This is a
- * wee bit faster than the above.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define KERNEL_DS	((mm_segment_t) { 0UL })
-#define USER_DS		((mm_segment_t) { -0x40000000000UL })
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define get_fs()  (current_thread_info()->addr_limit)
-#define get_ds()  (KERNEL_DS)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-/*
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - AND "addr+size" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- */
-#define __access_ok(addr,size,segment) \
-	(((segment).seg & (addr | size | (addr+size))) == 0)
-
-#define access_ok(type,addr,size)				\
-({								\
-	__chk_user_ptr(addr);					\
-	__access_ok(((unsigned long)(addr)),(size),get_fs());	\
-})
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * As the alpha uses the same address space for kernel and user
- * data, we can just do these as direct assignments.  (Of course, the
- * exception handling means that it's no longer "just"...)
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof/typeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) \
-  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)),get_fs())
-#define get_user(x,ptr) \
-  __get_user_check((x),(ptr),sizeof(*(ptr)),get_fs())
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the programmer has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) \
-  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) \
-  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-  
-/*
- * The "lda %1, 2b-1b(%0)" bits are magic to get the assembler to
- * encode the bits we need for resolving the exception.  See the
- * more extensive comments with fixup_inline_exception below for
- * more information.
- */
-
-extern void __get_user_unknown(void);
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err = 0;					\
-	unsigned long __gu_val;					\
-	__chk_user_ptr(ptr);					\
-	switch (size) {						\
-	  case 1: __get_user_8(ptr); break;			\
-	  case 2: __get_user_16(ptr); break;			\
-	  case 4: __get_user_32(ptr); break;			\
-	  case 8: __get_user_64(ptr); break;			\
-	  default: __get_user_unknown(); break;			\
-	}							\
-	(x) = (__typeof__(*(ptr))) __gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x,ptr,size,segment)				\
-({									\
-	long __gu_err = -EFAULT;					\
-	unsigned long __gu_val = 0;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
-	if (__access_ok((unsigned long)__gu_addr,size,segment)) {	\
-		__gu_err = 0;						\
-		switch (size) {						\
-		  case 1: __get_user_8(__gu_addr); break;		\
-		  case 2: __get_user_16(__gu_addr); break;		\
-		  case 4: __get_user_32(__gu_addr); break;		\
-		  case 8: __get_user_64(__gu_addr); break;		\
-		  default: __get_user_unknown(); break;			\
-		}							\
-	}								\
-	(x) = (__typeof__(*(ptr))) __gu_val;				\
-	__gu_err;							\
-})
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_64(addr)				\
-	__asm__("1: ldq %0,%2\n"			\
-	"2:\n"						\
-	".section __ex_table,\"a\"\n"			\
-	"	.long 1b - .\n"				\
-	"	lda %0, 2b-1b(%1)\n"			\
-	".previous"					\
-		: "=r"(__gu_val), "=r"(__gu_err)	\
-		: "m"(__m(addr)), "1"(__gu_err))
-
-#define __get_user_32(addr)				\
-	__asm__("1: ldl %0,%2\n"			\
-	"2:\n"						\
-	".section __ex_table,\"a\"\n"			\
-	"	.long 1b - .\n"				\
-	"	lda %0, 2b-1b(%1)\n"			\
-	".previous"					\
-		: "=r"(__gu_val), "=r"(__gu_err)	\
-		: "m"(__m(addr)), "1"(__gu_err))
-
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
-#define __get_user_16(addr)				\
-	__asm__("1: ldwu %0,%2\n"			\
-	"2:\n"						\
-	".section __ex_table,\"a\"\n"			\
-	"	.long 1b - .\n"				\
-	"	lda %0, 2b-1b(%1)\n"			\
-	".previous"					\
-		: "=r"(__gu_val), "=r"(__gu_err)	\
-		: "m"(__m(addr)), "1"(__gu_err))
-
-#define __get_user_8(addr)				\
-	__asm__("1: ldbu %0,%2\n"			\
-	"2:\n"						\
-	".section __ex_table,\"a\"\n"			\
-	"	.long 1b - .\n"				\
-	"	lda %0, 2b-1b(%1)\n"			\
-	".previous"					\
-		: "=r"(__gu_val), "=r"(__gu_err)	\
-		: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   load, so we have to do a general unaligned operation.  */
-
-#define __get_user_16(addr)						\
-{									\
-	long __gu_tmp;							\
-	__asm__("1: ldq_u %0,0(%3)\n"					\
-	"2:	ldq_u %1,1(%3)\n"					\
-	"	extwl %0,%3,%0\n"					\
-	"	extwh %1,%3,%1\n"					\
-	"	or %0,%1,%0\n"						\
-	"3:\n"								\
-	".section __ex_table,\"a\"\n"					\
-	"	.long 1b - .\n"						\
-	"	lda %0, 3b-1b(%2)\n"					\
-	"	.long 2b - .\n"						\
-	"	lda %0, 3b-2b(%2)\n"					\
-	".previous"							\
-		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
-		: "r"(addr), "2"(__gu_err));				\
-}
-
-#define __get_user_8(addr)						\
-	__asm__("1: ldq_u %0,0(%2)\n"					\
-	"	extbl %0,%2,%0\n"					\
-	"2:\n"								\
-	".section __ex_table,\"a\"\n"					\
-	"	.long 1b - .\n"						\
-	"	lda %0, 2b-1b(%1)\n"					\
-	".previous"							\
-		: "=&r"(__gu_val), "=r"(__gu_err)			\
-		: "r"(addr), "1"(__gu_err))
-#endif
-
-extern void __put_user_unknown(void);
-
-#define __put_user_nocheck(x,ptr,size)				\
-({								\
-	long __pu_err = 0;					\
-	__chk_user_ptr(ptr);					\
-	switch (size) {						\
-	  case 1: __put_user_8(x,ptr); break;			\
-	  case 2: __put_user_16(x,ptr); break;			\
-	  case 4: __put_user_32(x,ptr); break;			\
-	  case 8: __put_user_64(x,ptr); break;			\
-	  default: __put_user_unknown(); break;			\
-	}							\
-	__pu_err;						\
-})
-
-#define __put_user_check(x,ptr,size,segment)				\
-({									\
-	long __pu_err = -EFAULT;					\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
-	if (__access_ok((unsigned long)__pu_addr,size,segment)) {	\
-		__pu_err = 0;						\
-		switch (size) {						\
-		  case 1: __put_user_8(x,__pu_addr); break;		\
-		  case 2: __put_user_16(x,__pu_addr); break;		\
-		  case 4: __put_user_32(x,__pu_addr); break;		\
-		  case 8: __put_user_64(x,__pu_addr); break;		\
-		  default: __put_user_unknown(); break;			\
-		}							\
-	}								\
-	__pu_err;							\
-})
-
-/*
- * The "__put_user_xx()" macros tell gcc they read from memory
- * instead of writing: this is because they do not write to
- * any memory gcc knows about, so there are no aliasing issues
- */
-#define __put_user_64(x,addr)					\
-__asm__ __volatile__("1: stq %r2,%1\n"				\
-	"2:\n"							\
-	".section __ex_table,\"a\"\n"				\
-	"	.long 1b - .\n"					\
-	"	lda $31,2b-1b(%0)\n"				\
-	".previous"						\
-		: "=r"(__pu_err)				\
-		: "m" (__m(addr)), "rJ" (x), "0"(__pu_err))
-
-#define __put_user_32(x,addr)					\
-__asm__ __volatile__("1: stl %r2,%1\n"				\
-	"2:\n"							\
-	".section __ex_table,\"a\"\n"				\
-	"	.long 1b - .\n"					\
-	"	lda $31,2b-1b(%0)\n"				\
-	".previous"						\
-		: "=r"(__pu_err)				\
-		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
-#define __put_user_16(x,addr)					\
-__asm__ __volatile__("1: stw %r2,%1\n"				\
-	"2:\n"							\
-	".section __ex_table,\"a\"\n"				\
-	"	.long 1b - .\n"					\
-	"	lda $31,2b-1b(%0)\n"				\
-	".previous"						\
-		: "=r"(__pu_err)				\
-		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-
-#define __put_user_8(x,addr)					\
-__asm__ __volatile__("1: stb %r2,%1\n"				\
-	"2:\n"							\
-	".section __ex_table,\"a\"\n"				\
-	"	.long 1b - .\n"					\
-	"	lda $31,2b-1b(%0)\n"				\
-	".previous"						\
-		: "=r"(__pu_err)				\
-		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   write, so we have to do a general unaligned operation.  */
-
-#define __put_user_16(x,addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %2,1(%5)\n"				\
-	"2:	ldq_u %1,0(%5)\n"				\
-	"	inswh %6,%5,%4\n"				\
-	"	inswl %6,%5,%3\n"				\
-	"	mskwh %2,%5,%2\n"				\
-	"	mskwl %1,%5,%1\n"				\
-	"	or %2,%4,%2\n"					\
-	"	or %1,%3,%1\n"					\
-	"3:	stq_u %2,1(%5)\n"				\
-	"4:	stq_u %1,0(%5)\n"				\
-	"5:\n"							\
-	".section __ex_table,\"a\"\n"				\
-	"	.long 1b - .\n"					\
-	"	lda $31, 5b-1b(%0)\n"				\
-	"	.long 2b - .\n"					\
-	"	lda $31, 5b-2b(%0)\n"				\
-	"	.long 3b - .\n"					\
-	"	lda $31, 5b-3b(%0)\n"				\
-	"	.long 4b - .\n"					\
-	"	lda $31, 5b-4b(%0)\n"				\
-	".previous"						\
-		: "=r"(__pu_err), "=&r"(__pu_tmp1),		\
-		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3),		\
-		  "=&r"(__pu_tmp4)				\
-		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x,addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2;				\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %1,0(%4)\n"				\
-	"	insbl %3,%4,%2\n"				\
-	"	mskbl %1,%4,%1\n"				\
-	"	or %1,%2,%1\n"					\
-	"2:	stq_u %1,0(%4)\n"				\
-	"3:\n"							\
-	".section __ex_table,\"a\"\n"				\
-	"	.long 1b - .\n"					\
-	"	lda $31, 3b-1b(%0)\n"				\
-	"	.long 2b - .\n"					\
-	"	lda $31, 3b-2b(%0)\n"				\
-	".previous"						\
-		: "=r"(__pu_err),				\
-	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
-		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
-
-/*
- * Complex access routines
- */
-
-/* This little bit of silliness is to get the GP loaded for a function
-   that ordinarily wouldn't.  Otherwise we could have it done by the macro
-   directly, which can be optimized the linker.  */
-#ifdef MODULE
-#define __module_address(sym)		"r"(sym),
-#define __module_call(ra, arg, sym)	"jsr $" #ra ",(%" #arg ")," #sym
-#else
-#define __module_address(sym)
-#define __module_call(ra, arg, sym)	"bsr $" #ra "," #sym " !samegp"
-#endif
-
-extern void __copy_user(void);
-
-extern inline long
-__copy_tofrom_user_nocheck(void *to, const void *from, long len)
-{
-	register void * __cu_to __asm__("$6") = to;
-	register const void * __cu_from __asm__("$7") = from;
-	register long __cu_len __asm__("$0") = len;
-
-	__asm__ __volatile__(
-		__module_call(28, 3, __copy_user)
-		: "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to)
-		: __module_address(__copy_user)
-		  "0" (__cu_len), "1" (__cu_from), "2" (__cu_to)
-		: "$1","$2","$3","$4","$5","$28","memory");
-
-	return __cu_len;
-}
-
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
-#define __copy_to_user(to,from,n)					\
-({									\
-	__chk_user_ptr(to);						\
-	__copy_tofrom_user_nocheck((__force void *)(to),(from),(n));	\
-})
-#define __copy_from_user(to,from,n)					\
-({									\
-	__chk_user_ptr(from);						\
-	__copy_tofrom_user_nocheck((to),(__force void *)(from),(n));	\
-})
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-
-extern inline long
-copy_to_user(void __user *to, const void *from, long n)
-{
-	return __copy_tofrom_user((__force void *)to, from, n, to);
-}
-
-extern inline long
-copy_from_user(void *to, const void __user *from, long n)
-{
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
-}
-
-extern void __do_clear_user(void);
-
-extern inline long
-__clear_user(void __user *to, long len)
-{
-	register void __user * __cl_to __asm__("$6") = to;
-	register long __cl_len __asm__("$0") = len;
-	__asm__ __volatile__(
-		__module_call(28, 2, __do_clear_user)
-		: "=r"(__cl_len), "=r"(__cl_to)
-		: __module_address(__do_clear_user)
-		  "0"(__cl_len), "1"(__cl_to)
-		: "$1","$2","$3","$4","$5","$28","memory");
-	return __cl_len;
-}
-
-extern inline long
-clear_user(void __user *to, long len)
-{
-	if (__access_ok((unsigned long)to, len, get_fs()))
-		len = __clear_user(to, len);
-	return len;
-}
-
-#undef __module_address
-#undef __module_call
-
-/* Returns: -EFAULT if exception before terminator, N if the entire
-   buffer filled, else strlen.  */
-
-extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len);
-
-extern inline long
-strncpy_from_user(char *to, const char __user *from, long n)
-{
-	long ret = -EFAULT;
-	if (__access_ok((unsigned long)from, 0, get_fs()))
-		ret = __strncpy_from_user(to, from, n);
-	return ret;
-}
-
-/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-extern long __strlen_user(const char __user *);
-
-extern inline long strlen_user(const char __user *str)
-{
-	return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0;
-}
-
-/* Returns: 0 if exception before NUL or reaching the supplied limit (N),
- * a value greater than N if the limit would be exceeded, else strlen.  */
-extern long __strnlen_user(const char __user *, long);
-
-extern inline long strnlen_user(const char __user *str, long n)
-{
-	return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0;
-}
-
-/*
- * About the exception table:
- *
- * - insn is a 32-bit pc-relative offset from the faulting insn.
- * - nextinsn is a 16-bit offset off of the faulting instruction
- *   (not off of the *next* instruction as branches are).
- * - errreg is the register in which to place -EFAULT.
- * - valreg is the final target register for the load sequence
- *   and will be zeroed.
- *
- * Either errreg or valreg may be $31, in which case nothing happens.
- *
- * The exception fixup information "just so happens" to be arranged
- * as in a MEM format instruction.  This lets us emit our three
- * values like so:
- *
- *      lda valreg, nextinsn(errreg)
- *
- */
-
-struct exception_table_entry
-{
-	signed int insn;
-	union exception_fixup {
-		unsigned unit;
-		struct {
-			signed int nextinsn : 16;
-			unsigned int errreg : 5;
-			unsigned int valreg : 5;
-		} bits;
-	} fixup;
-};
-
-/* Returns the new pc */
-#define fixup_exception(map_reg, _fixup, pc)			\
-({								\
-	if ((_fixup)->fixup.bits.valreg != 31)			\
-		map_reg((_fixup)->fixup.bits.valreg) = 0;	\
-	if ((_fixup)->fixup.bits.errreg != 31)			\
-		map_reg((_fixup)->fixup.bits.errreg) = -EFAULT;	\
-	(pc) + (_fixup)->fixup.bits.nextinsn;			\
-})
-
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
-
-#endif /* __ALPHA_UACCESS_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/ucontext.h b/ANDROID_3.4.5/arch/alpha/include/asm/ucontext.h
deleted file mode 100644
index 47578ab4..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/ucontext.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASMAXP_UCONTEXT_H
-#define _ASMAXP_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	old_sigset_t	  uc_osf_sigmask;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* !_ASMAXP_UCONTEXT_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/unaligned.h b/ANDROID_3.4.5/arch/alpha/include/asm/unaligned.h
deleted file mode 100644
index 3787c60a..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/unaligned.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_ALPHA_UNALIGNED_H
-#define _ASM_ALPHA_UNALIGNED_H
-
-#include <linux/unaligned/le_struct.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_le
-#define put_unaligned __put_unaligned_le
-
-#endif /* _ASM_ALPHA_UNALIGNED_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/unistd.h b/ANDROID_3.4.5/arch/alpha/include/asm/unistd.h
deleted file mode 100644
index 2207fc61..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/unistd.h
+++ /dev/null
@@ -1,491 +0,0 @@
-#ifndef _ALPHA_UNISTD_H
-#define _ALPHA_UNISTD_H
-
-#define __NR_osf_syscall	  0	/* not implemented */
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_osf_old_open	  5	/* not implemented */
-#define __NR_close		  6
-#define __NR_osf_wait4		  7
-#define __NR_osf_old_creat	  8	/* not implemented */
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_osf_execve		 11	/* not implemented */
-#define __NR_chdir		 12
-#define __NR_fchdir		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_brk		 17
-#define __NR_osf_getfsstat	 18	/* not implemented */
-#define __NR_lseek		 19
-#define __NR_getxpid		 20
-#define __NR_osf_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getxuid		 24
-#define __NR_exec_with_loader	 25	/* not implemented */
-#define __NR_ptrace		 26
-#define __NR_osf_nrecvmsg	 27	/* not implemented */
-#define __NR_osf_nsendmsg	 28	/* not implemented */
-#define __NR_osf_nrecvfrom	 29	/* not implemented */
-#define __NR_osf_naccept	 30	/* not implemented */
-#define __NR_osf_ngetpeername	 31	/* not implemented */
-#define __NR_osf_ngetsockname	 32	/* not implemented */
-#define __NR_access		 33
-#define __NR_osf_chflags	 34	/* not implemented */
-#define __NR_osf_fchflags	 35	/* not implemented */
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_osf_old_stat	 38	/* not implemented */
-#define __NR_setpgid		 39
-#define __NR_osf_old_lstat	 40	/* not implemented */
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_osf_set_program_attributes	43
-#define __NR_osf_profil		 44	/* not implemented */
-#define __NR_open		 45
-#define __NR_osf_old_sigaction	 46	/* not implemented */
-#define __NR_getxgid		 47
-#define __NR_osf_sigprocmask	 48
-#define __NR_osf_getlogin	 49	/* not implemented */
-#define __NR_osf_setlogin	 50	/* not implemented */
-#define __NR_acct		 51
-#define __NR_sigpending		 52
-
-#define __NR_ioctl		 54
-#define __NR_osf_reboot		 55	/* not implemented */
-#define __NR_osf_revoke		 56	/* not implemented */
-#define __NR_symlink		 57
-#define __NR_readlink		 58
-#define __NR_execve		 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_osf_old_fstat	 62	/* not implemented */
-#define __NR_getpgrp		 63
-#define __NR_getpagesize	 64
-#define __NR_osf_mremap		 65	/* not implemented */
-#define __NR_vfork		 66
-#define __NR_stat		 67
-#define __NR_lstat		 68
-#define __NR_osf_sbrk		 69	/* not implemented */
-#define __NR_osf_sstk		 70	/* not implemented */
-#define __NR_mmap		 71	/* OSF/1 mmap is superset of Linux */
-#define __NR_osf_old_vadvise	 72	/* not implemented */
-#define __NR_munmap		 73
-#define __NR_mprotect		 74
-#define __NR_madvise		 75
-#define __NR_vhangup		 76
-#define __NR_osf_kmodcall	 77	/* not implemented */
-#define __NR_osf_mincore	 78	/* not implemented */
-#define __NR_getgroups		 79
-#define __NR_setgroups		 80
-#define __NR_osf_old_getpgrp	 81	/* not implemented */
-#define __NR_setpgrp		 82	/* BSD alias for setpgid */
-#define __NR_osf_setitimer	 83
-#define __NR_osf_old_wait	 84	/* not implemented */
-#define __NR_osf_table		 85	/* not implemented */
-#define __NR_osf_getitimer	 86
-#define __NR_gethostname	 87
-#define __NR_sethostname	 88
-#define __NR_getdtablesize	 89
-#define __NR_dup2		 90
-#define __NR_fstat		 91
-#define __NR_fcntl		 92
-#define __NR_osf_select		 93
-#define __NR_poll		 94
-#define __NR_fsync		 95
-#define __NR_setpriority	 96
-#define __NR_socket		 97
-#define __NR_connect		 98
-#define __NR_accept		 99
-#define __NR_getpriority	100
-#define __NR_send		101
-#define __NR_recv		102
-#define __NR_sigreturn		103
-#define __NR_bind		104
-#define __NR_setsockopt		105
-#define __NR_listen		106
-#define __NR_osf_plock		107	/* not implemented */
-#define __NR_osf_old_sigvec	108	/* not implemented */
-#define __NR_osf_old_sigblock	109	/* not implemented */
-#define __NR_osf_old_sigsetmask	110	/* not implemented */
-#define __NR_sigsuspend		111
-#define __NR_osf_sigstack	112
-#define __NR_recvmsg		113
-#define __NR_sendmsg		114
-#define __NR_osf_old_vtrace	115	/* not implemented */
-#define __NR_osf_gettimeofday	116
-#define __NR_osf_getrusage	117
-#define __NR_getsockopt		118
-
-#define __NR_readv		120
-#define __NR_writev		121
-#define __NR_osf_settimeofday	122
-#define __NR_fchown		123
-#define __NR_fchmod		124
-#define __NR_recvfrom		125
-#define __NR_setreuid		126
-#define __NR_setregid		127
-#define __NR_rename		128
-#define __NR_truncate		129
-#define __NR_ftruncate		130
-#define __NR_flock		131
-#define __NR_setgid		132
-#define __NR_sendto		133
-#define __NR_shutdown		134
-#define __NR_socketpair		135
-#define __NR_mkdir		136
-#define __NR_rmdir		137
-#define __NR_osf_utimes		138
-#define __NR_osf_old_sigreturn	139	/* not implemented */
-#define __NR_osf_adjtime	140	/* not implemented */
-#define __NR_getpeername	141
-#define __NR_osf_gethostid	142	/* not implemented */
-#define __NR_osf_sethostid	143	/* not implemented */
-#define __NR_getrlimit		144
-#define __NR_setrlimit		145
-#define __NR_osf_old_killpg	146	/* not implemented */
-#define __NR_setsid		147
-#define __NR_quotactl		148
-#define __NR_osf_oldquota	149	/* not implemented */
-#define __NR_getsockname	150
-
-#define __NR_osf_pid_block	153	/* not implemented */
-#define __NR_osf_pid_unblock	154	/* not implemented */
-
-#define __NR_sigaction		156
-#define __NR_osf_sigwaitprim	157	/* not implemented */
-#define __NR_osf_nfssvc		158	/* not implemented */
-#define __NR_osf_getdirentries	159
-#define __NR_osf_statfs		160
-#define __NR_osf_fstatfs	161
-
-#define __NR_osf_asynch_daemon	163	/* not implemented */
-#define __NR_osf_getfh		164	/* not implemented */	
-#define __NR_osf_getdomainname	165
-#define __NR_setdomainname	166
-
-#define __NR_osf_exportfs	169	/* not implemented */
-
-#define __NR_osf_alt_plock	181	/* not implemented */
-
-#define __NR_osf_getmnt		184	/* not implemented */
-
-#define __NR_osf_alt_sigpending	187	/* not implemented */
-#define __NR_osf_alt_setsid	188	/* not implemented */
-
-#define __NR_osf_swapon		199
-#define __NR_msgctl		200
-#define __NR_msgget		201
-#define __NR_msgrcv		202
-#define __NR_msgsnd		203
-#define __NR_semctl		204
-#define __NR_semget		205
-#define __NR_semop		206
-#define __NR_osf_utsname	207
-#define __NR_lchown		208
-#define __NR_osf_shmat		209
-#define __NR_shmctl		210
-#define __NR_shmdt		211
-#define __NR_shmget		212
-#define __NR_osf_mvalid		213	/* not implemented */
-#define __NR_osf_getaddressconf	214	/* not implemented */
-#define __NR_osf_msleep		215	/* not implemented */
-#define __NR_osf_mwakeup	216	/* not implemented */
-#define __NR_msync		217
-#define __NR_osf_signal		218	/* not implemented */
-#define __NR_osf_utc_gettime	219	/* not implemented */
-#define __NR_osf_utc_adjtime	220	/* not implemented */
-
-#define __NR_osf_security	222	/* not implemented */
-#define __NR_osf_kloadcall	223	/* not implemented */
-
-#define __NR_getpgid		233
-#define __NR_getsid		234
-#define __NR_sigaltstack	235
-#define __NR_osf_waitid		236	/* not implemented */
-#define __NR_osf_priocntlset	237	/* not implemented */
-#define __NR_osf_sigsendset	238	/* not implemented */
-#define __NR_osf_set_speculative	239	/* not implemented */
-#define __NR_osf_msfs_syscall	240	/* not implemented */
-#define __NR_osf_sysinfo	241
-#define __NR_osf_uadmin		242	/* not implemented */
-#define __NR_osf_fuser		243	/* not implemented */
-#define __NR_osf_proplist_syscall    244
-#define __NR_osf_ntp_adjtime	245	/* not implemented */
-#define __NR_osf_ntp_gettime	246	/* not implemented */
-#define __NR_osf_pathconf	247	/* not implemented */
-#define __NR_osf_fpathconf	248	/* not implemented */
-
-#define __NR_osf_uswitch	250	/* not implemented */
-#define __NR_osf_usleep_thread	251
-#define __NR_osf_audcntl	252	/* not implemented */
-#define __NR_osf_audgen		253	/* not implemented */
-#define __NR_sysfs		254
-#define __NR_osf_subsys_info	255	/* not implemented */
-#define __NR_osf_getsysinfo	256
-#define __NR_osf_setsysinfo	257
-#define __NR_osf_afs_syscall	258	/* not implemented */
-#define __NR_osf_swapctl	259	/* not implemented */
-#define __NR_osf_memcntl	260	/* not implemented */
-#define __NR_osf_fdatasync	261	/* not implemented */
-
-/*
- * Ignore legacy syscalls that we don't use.
- */
-#define __IGNORE_alarm
-#define __IGNORE_creat
-#define __IGNORE_getegid
-#define __IGNORE_geteuid
-#define __IGNORE_getgid
-#define __IGNORE_getpid
-#define __IGNORE_getppid
-#define __IGNORE_getuid
-#define __IGNORE_pause
-#define __IGNORE_time
-#define __IGNORE_utime
-#define __IGNORE_umount2
-
-/*
- * Linux-specific system calls begin at 300
- */
-#define __NR_bdflush		300
-#define __NR_sethae		301
-#define __NR_mount		302
-#define __NR_old_adjtimex	303
-#define __NR_swapoff		304
-#define __NR_getdents		305
-#define __NR_create_module	306
-#define __NR_init_module	307
-#define __NR_delete_module	308
-#define __NR_get_kernel_syms	309
-#define __NR_syslog		310
-#define __NR_reboot		311
-#define __NR_clone		312
-#define __NR_uselib		313
-#define __NR_mlock		314
-#define __NR_munlock		315
-#define __NR_mlockall		316
-#define __NR_munlockall		317
-#define __NR_sysinfo		318
-#define __NR__sysctl		319
-/* 320 was sys_idle.  */
-#define __NR_oldumount		321
-#define __NR_swapon		322
-#define __NR_times		323
-#define __NR_personality	324
-#define __NR_setfsuid		325
-#define __NR_setfsgid		326
-#define __NR_ustat		327
-#define __NR_statfs		328
-#define __NR_fstatfs		329
-#define __NR_sched_setparam		330
-#define __NR_sched_getparam		331
-#define __NR_sched_setscheduler		332
-#define __NR_sched_getscheduler		333
-#define __NR_sched_yield		334
-#define __NR_sched_get_priority_max	335
-#define __NR_sched_get_priority_min	336
-#define __NR_sched_rr_get_interval	337
-#define __NR_afs_syscall		338
-#define __NR_uname			339
-#define __NR_nanosleep			340
-#define __NR_mremap			341
-#define __NR_nfsservctl			342
-#define __NR_setresuid			343
-#define __NR_getresuid			344
-#define __NR_pciconfig_read		345
-#define __NR_pciconfig_write		346
-#define __NR_query_module		347
-#define __NR_prctl			348
-#define __NR_pread64			349
-#define __NR_pwrite64			350
-#define __NR_rt_sigreturn		351
-#define __NR_rt_sigaction		352
-#define __NR_rt_sigprocmask		353
-#define __NR_rt_sigpending		354
-#define __NR_rt_sigtimedwait		355
-#define __NR_rt_sigqueueinfo		356
-#define __NR_rt_sigsuspend		357
-#define __NR_select			358
-#define __NR_gettimeofday		359
-#define __NR_settimeofday		360
-#define __NR_getitimer			361
-#define __NR_setitimer			362
-#define __NR_utimes			363
-#define __NR_getrusage			364
-#define __NR_wait4			365
-#define __NR_adjtimex			366
-#define __NR_getcwd			367
-#define __NR_capget			368
-#define __NR_capset			369
-#define __NR_sendfile			370
-#define __NR_setresgid			371
-#define __NR_getresgid			372
-#define __NR_dipc			373
-#define __NR_pivot_root			374
-#define __NR_mincore			375
-#define __NR_pciconfig_iobase		376
-#define __NR_getdents64			377
-#define __NR_gettid			378
-#define __NR_readahead			379
-/* 380 is unused */
-#define __NR_tkill			381
-#define __NR_setxattr			382
-#define __NR_lsetxattr			383
-#define __NR_fsetxattr			384
-#define __NR_getxattr			385
-#define __NR_lgetxattr			386
-#define __NR_fgetxattr			387
-#define __NR_listxattr			388
-#define __NR_llistxattr			389
-#define __NR_flistxattr			390
-#define __NR_removexattr		391
-#define __NR_lremovexattr		392
-#define __NR_fremovexattr		393
-#define __NR_futex			394
-#define __NR_sched_setaffinity		395     
-#define __NR_sched_getaffinity		396
-#define __NR_tuxcall			397
-#define __NR_io_setup			398
-#define __NR_io_destroy			399
-#define __NR_io_getevents		400
-#define __NR_io_submit			401
-#define __NR_io_cancel			402
-#define __NR_exit_group			405
-#define __NR_lookup_dcookie		406
-#define __NR_epoll_create		407
-#define __NR_epoll_ctl			408
-#define __NR_epoll_wait			409
-/* Feb 2007: These three sys_epoll defines shouldn't be here but culling
- * them would break userspace apps ... we'll kill them off in 2010 :) */
-#define __NR_sys_epoll_create		__NR_epoll_create
-#define __NR_sys_epoll_ctl		__NR_epoll_ctl
-#define __NR_sys_epoll_wait		__NR_epoll_wait
-#define __NR_remap_file_pages		410
-#define __NR_set_tid_address		411
-#define __NR_restart_syscall		412
-#define __NR_fadvise64			413
-#define __NR_timer_create		414
-#define __NR_timer_settime		415
-#define __NR_timer_gettime		416
-#define __NR_timer_getoverrun		417
-#define __NR_timer_delete		418
-#define __NR_clock_settime		419
-#define __NR_clock_gettime		420
-#define __NR_clock_getres		421
-#define __NR_clock_nanosleep		422
-#define __NR_semtimedop			423
-#define __NR_tgkill			424
-#define __NR_stat64			425
-#define __NR_lstat64			426
-#define __NR_fstat64			427
-#define __NR_vserver			428
-#define __NR_mbind			429
-#define __NR_get_mempolicy		430
-#define __NR_set_mempolicy		431
-#define __NR_mq_open			432
-#define __NR_mq_unlink			433
-#define __NR_mq_timedsend		434
-#define __NR_mq_timedreceive		435
-#define __NR_mq_notify			436
-#define __NR_mq_getsetattr		437
-#define __NR_waitid			438
-#define __NR_add_key			439
-#define __NR_request_key		440
-#define __NR_keyctl			441
-#define __NR_ioprio_set			442
-#define __NR_ioprio_get			443
-#define __NR_inotify_init		444
-#define __NR_inotify_add_watch		445
-#define __NR_inotify_rm_watch		446
-#define __NR_fdatasync			447
-#define __NR_kexec_load			448
-#define __NR_migrate_pages		449
-#define __NR_openat			450
-#define __NR_mkdirat			451
-#define __NR_mknodat			452
-#define __NR_fchownat			453
-#define __NR_futimesat			454
-#define __NR_fstatat64			455
-#define __NR_unlinkat			456
-#define __NR_renameat			457
-#define __NR_linkat			458
-#define __NR_symlinkat			459
-#define __NR_readlinkat			460
-#define __NR_fchmodat			461
-#define __NR_faccessat			462
-#define __NR_pselect6			463
-#define __NR_ppoll			464
-#define __NR_unshare			465
-#define __NR_set_robust_list		466
-#define __NR_get_robust_list		467
-#define __NR_splice			468
-#define __NR_sync_file_range		469
-#define __NR_tee			470
-#define __NR_vmsplice			471
-#define __NR_move_pages			472
-#define __NR_getcpu			473
-#define __NR_epoll_pwait		474
-#define __NR_utimensat			475
-#define __NR_signalfd			476
-#define __NR_timerfd			477
-#define __NR_eventfd			478
-#define __NR_recvmmsg			479
-#define __NR_fallocate			480
-#define __NR_timerfd_create		481
-#define __NR_timerfd_settime		482
-#define __NR_timerfd_gettime		483
-#define __NR_signalfd4			484
-#define __NR_eventfd2			485
-#define __NR_epoll_create1		486
-#define __NR_dup3			487
-#define __NR_pipe2			488
-#define __NR_inotify_init1		489
-#define __NR_preadv			490
-#define __NR_pwritev			491
-#define __NR_rt_tgsigqueueinfo		492
-#define __NR_perf_event_open		493
-#define __NR_fanotify_init		494
-#define __NR_fanotify_mark		495
-#define __NR_prlimit64			496
-#define __NR_name_to_handle_at		497
-#define __NR_open_by_handle_at		498
-#define __NR_clock_adjtime		499
-#define __NR_syncfs			500
-#define __NR_setns			501
-#define __NR_accept4			502
-#define __NR_sendmmsg			503
-
-#ifdef __KERNEL__
-
-#define NR_SYSCALLS			504
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/* "Conditional" syscalls.  What we want is
-
-	__attribute__((weak,alias("sys_ni_syscall")))
-
-   but that raises the problem of what type to give the symbol.  If we use
-   a prototype, it'll conflict with the definition given in this file and
-   others.  If we use __typeof, we discover that not all symbols actually
-   have declarations.  If we use no prototype, then we get warnings from
-   -Wstrict-prototypes.  Ho hum.  */
-
-#define cond_syscall(x)  asm(".weak\t" #x "\n" #x " = sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ALPHA_UNISTD_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/user.h b/ANDROID_3.4.5/arch/alpha/include/asm/user.h
deleted file mode 100644
index a4eb6a4c..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/user.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ALPHA_USER_H
-#define _ALPHA_USER_H
-
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-
-#include <asm/page.h>
-#include <asm/reg.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
- * are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- */
-struct user {
-	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ALPHA_USER_H */
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/vga.h b/ANDROID_3.4.5/arch/alpha/include/asm/vga.h
deleted file mode 100644
index c00106ba..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/vga.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *	Access to VGA videoram
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
-
-#include <asm/io.h>
-
-#define VT_BUF_HAVE_RW
-#define VT_BUF_HAVE_MEMSETW
-#define VT_BUF_HAVE_MEMCPYW
-
-static inline void scr_writew(u16 val, volatile u16 *addr)
-{
-	if (__is_ioaddr(addr))
-		__raw_writew(val, (volatile u16 __iomem *) addr);
-	else
-		*addr = val;
-}
-
-static inline u16 scr_readw(volatile const u16 *addr)
-{
-	if (__is_ioaddr(addr))
-		return __raw_readw((volatile const u16 __iomem *) addr);
-	else
-		return *addr;
-}
-
-static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
-{
-	if (__is_ioaddr(s))
-		memsetw_io((u16 __iomem *) s, c, count);
-	else
-		memsetw(s, c, count);
-}
-
-/* Do not trust that the usage will be correct; analyze the arguments.  */
-extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
-
-/* ??? These are currently only used for downloading character sets.  As
-   such, they don't need memory barriers.  Is this all they are intended
-   to be used for?  */
-#define vga_readb(a)	readb((u8 __iomem *)(a))
-#define vga_writeb(v,a)	writeb(v, (u8 __iomem *)(a))
-
-#ifdef CONFIG_VGA_HOSE
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-extern struct pci_controller *pci_vga_hose;
-
-# define __is_port_vga(a)       \
-	(((a) >= 0x3b0) && ((a) < 0x3e0) && \
-	 ((a) != 0x3b3) && ((a) != 0x3d3))
-
-# define __is_mem_vga(a) \
-	(((a) >= 0xa0000) && ((a) <= 0xc0000))
-
-# define FIXUP_IOADDR_VGA(a) do {                       \
-	if (pci_vga_hose && __is_port_vga(a))     \
-		(a) += pci_vga_hose->io_space->start;	  \
- } while(0)
-
-# define FIXUP_MEMADDR_VGA(a) do {                       \
-	if (pci_vga_hose && __is_mem_vga(a))     \
-		(a) += pci_vga_hose->mem_space->start; \
- } while(0)
-
-#else /* CONFIG_VGA_HOSE */
-# define pci_vga_hose 0
-# define __is_port_vga(a) 0
-# define __is_mem_vga(a) 0
-# define FIXUP_IOADDR_VGA(a)
-# define FIXUP_MEMADDR_VGA(a)
-#endif /* CONFIG_VGA_HOSE */
-
-#define VGA_MAP_MEM(x,s)	((unsigned long) ioremap(x, s))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/wrperfmon.h b/ANDROID_3.4.5/arch/alpha/include/asm/wrperfmon.h
deleted file mode 100644
index 319bf678..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/wrperfmon.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Definitions for use with the Alpha wrperfmon PAL call.
- */
-
-#ifndef __ALPHA_WRPERFMON_H
-#define __ALPHA_WRPERFMON_H
-
-/* Following commands are implemented on all CPUs */
-#define PERFMON_CMD_DISABLE 0
-#define PERFMON_CMD_ENABLE 1
-#define PERFMON_CMD_DESIRED_EVENTS 2
-#define PERFMON_CMD_LOGGING_OPTIONS 3
-/* Following commands on EV5/EV56/PCA56 only */
-#define PERFMON_CMD_INT_FREQ 4
-#define PERFMON_CMD_ENABLE_CLEAR 7
-/* Following commands are on EV5 and better CPUs */
-#define PERFMON_CMD_READ 5
-#define PERFMON_CMD_WRITE 6
-/* Following command are on EV6 and better CPUs */
-#define PERFMON_CMD_ENABLE_WRITE 7
-/* Following command are on EV67 and better CPUs */
-#define PERFMON_CMD_I_STAT 8
-#define PERFMON_CMD_PMPC 9
-
-
-/* EV5/EV56/PCA56 Counters */
-#define EV5_PCTR_0 (1UL<<0)
-#define EV5_PCTR_1 (1UL<<1)
-#define EV5_PCTR_2 (1UL<<2)
-
-#define EV5_PCTR_0_COUNT_SHIFT 48
-#define EV5_PCTR_1_COUNT_SHIFT 32
-#define EV5_PCTR_2_COUNT_SHIFT 16
-
-#define EV5_PCTR_0_COUNT_MASK 0xffffUL
-#define EV5_PCTR_1_COUNT_MASK 0xffffUL
-#define EV5_PCTR_2_COUNT_MASK 0x3fffUL
-
-/* EV6 Counters */
-#define EV6_PCTR_0 (1UL<<0)
-#define EV6_PCTR_1 (1UL<<1)
-
-#define EV6_PCTR_0_COUNT_SHIFT 28
-#define EV6_PCTR_1_COUNT_SHIFT 6
-
-#define EV6_PCTR_0_COUNT_MASK 0xfffffUL
-#define EV6_PCTR_1_COUNT_MASK 0xfffffUL
-
-/* EV67 (and subsequent) counters */
-#define EV67_PCTR_0 (1UL<<0)
-#define EV67_PCTR_1 (1UL<<1)
-
-#define EV67_PCTR_0_COUNT_SHIFT 28
-#define EV67_PCTR_1_COUNT_SHIFT 6
-
-#define EV67_PCTR_0_COUNT_MASK 0xfffffUL
-#define EV67_PCTR_1_COUNT_MASK 0xfffffUL
-
-
-/*
- * The Alpha Architecure Handbook, vers. 4 (1998) appears to have a misprint
- *  in Table E-23 regarding the bits that set the event PCTR 1 counts.
- *  Hopefully what we have here is correct.
- */
-#define EV6_PCTR_0_EVENT_MASK 0x10UL
-#define EV6_PCTR_1_EVENT_MASK 0x0fUL
-
-/* EV6 Events */
-#define EV6_PCTR_0_CYCLES (0UL << 4)
-#define EV6_PCTR_0_INSTRUCTIONS (1UL << 4)
-
-#define EV6_PCTR_1_CYCLES 0
-#define EV6_PCTR_1_BRANCHES 1
-#define EV6_PCTR_1_BRANCH_MISPREDICTS 2
-#define EV6_PCTR_1_DTB_SINGLE_MISSES 3
-#define EV6_PCTR_1_DTB_DOUBLE_MISSES 4
-#define EV6_PCTR_1_ITB_MISSES 5
-#define EV6_PCTR_1_UNALIGNED_TRAPS 6
-#define EV6_PCTR_1_REPLY_TRAPS 7
-
-/* From the Alpha Architecture Reference Manual, 4th edn., 2002 */
-#define EV67_PCTR_MODE_MASK 0x10UL
-#define EV67_PCTR_EVENT_MASK 0x0CUL
-
-#define EV67_PCTR_MODE_PROFILEME (1UL<<4)
-#define EV67_PCTR_MODE_AGGREGATE (0UL<<4)
-
-#define EV67_PCTR_INSTR_CYCLES (0UL<<2)
-#define EV67_PCTR_CYCLES_UNDEF (1UL<<2)
-#define EV67_PCTR_INSTR_BCACHEMISS (2UL<<2)
-#define EV67_PCTR_CYCLES_MBOX (3UL<<2)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/xchg.h b/ANDROID_3.4.5/arch/alpha/include/asm/xchg.h
deleted file mode 100644
index 0ca97245..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/xchg.h
+++ /dev/null
@@ -1,258 +0,0 @@
-#ifndef _ALPHA_CMPXCHG_H
-#error Do not include xchg.h directly!
-#else
-/*
- * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
- * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/cmpxchg.h.
- */
-
-/*
- * Atomic exchange.
- * Since it can be used to implement critical sections
- * it must clobber "memory" (also for interrupts in UP).
- */
-
-static inline unsigned long
-____xchg(_u8, volatile char *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	insbl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extbl	%2,%4,%0\n"
-	"	mskbl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-		__ASM__MB
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u16, volatile short *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	inswl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extwl	%2,%4,%0\n"
-	"	mskwl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-		__ASM__MB
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u32, volatile int *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,2f\n"
-		__ASM__MB
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-static inline unsigned long
-____xchg(_u64, volatile long *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,2f\n"
-		__ASM__MB
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____xchg(, volatile void *ptr, unsigned long x, int size)
-{
-	switch (size) {
-		case 1:
-			return ____xchg(_u8, ptr, x);
-		case 2:
-			return ____xchg(_u16, ptr, x);
-		case 4:
-			return ____xchg(_u32, ptr, x);
-		case 8:
-			return ____xchg(_u64, ptr, x);
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- *
- * The memory barrier should be placed in SMP only when we actually
- * make the change. If we don't change anything (so if the returned
- * prev is equal to old) then we aren't acquiring anything new and
- * we don't need any memory barrier as far I can tell.
- */
-
-static inline unsigned long
-____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	insbl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extbl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskbl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-		__ASM__MB
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	inswl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extwl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskwl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-		__ASM__MB
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u32, volatile int *m, int old, int new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,3f\n"
-		__ASM__MB
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,3f\n"
-		__ASM__MB
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____cmpxchg(, volatile void *ptr, unsigned long old, unsigned long new,
-	      int size)
-{
-	switch (size) {
-		case 1:
-			return ____cmpxchg(_u8, ptr, old, new);
-		case 2:
-			return ____cmpxchg(_u16, ptr, old, new);
-		case 4:
-			return ____cmpxchg(_u32, ptr, old, new);
-		case 8:
-			return ____cmpxchg(_u64, ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/include/asm/xor.h b/ANDROID_3.4.5/arch/alpha/include/asm/xor.h
deleted file mode 100644
index 5ee1c2bc..00000000
--- a/ANDROID_3.4.5/arch/alpha/include/asm/xor.h
+++ /dev/null
@@ -1,855 +0,0 @@
-/*
- * include/asm-alpha/xor.h
- *
- * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *);
-extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *);
-extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *, unsigned long *);
-
-extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *);
-extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *, unsigned long *);
-
-asm("								\n\
-	.text							\n\
-	.align 3						\n\
-	.ent xor_alpha_2					\n\
-xor_alpha_2:							\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-	.align 4						\n\
-2:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,8($17)						\n\
-	ldq $3,8($18)						\n\
-								\n\
-	ldq $4,16($17)						\n\
-	ldq $5,16($18)						\n\
-	ldq $6,24($17)						\n\
-	ldq $7,24($18)						\n\
-								\n\
-	ldq $19,32($17)						\n\
-	ldq $20,32($18)						\n\
-	ldq $21,40($17)						\n\
-	ldq $22,40($18)						\n\
-								\n\
-	ldq $23,48($17)						\n\
-	ldq $24,48($18)						\n\
-	ldq $25,56($17)						\n\
-	xor $0,$1,$0		# 7 cycles from $1 load		\n\
-								\n\
-	ldq $27,56($18)						\n\
-	xor $2,$3,$2						\n\
-	stq $0,0($17)						\n\
-	xor $4,$5,$4						\n\
-								\n\
-	stq $2,8($17)						\n\
-	xor $6,$7,$6						\n\
-	stq $4,16($17)						\n\
-	xor $19,$20,$19						\n\
-								\n\
-	stq $6,24($17)						\n\
-	xor $21,$22,$21						\n\
-	stq $19,32($17)						\n\
-	xor $23,$24,$23						\n\
-								\n\
-	stq $21,40($17)						\n\
-	xor $25,$27,$25						\n\
-	stq $23,48($17)						\n\
-	subq $16,1,$16						\n\
-								\n\
-	stq $25,56($17)						\n\
-	addq $17,64,$17						\n\
-	addq $18,64,$18						\n\
-	bgt $16,2b						\n\
-								\n\
-	ret							\n\
-	.end xor_alpha_2					\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_3					\n\
-xor_alpha_3:							\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-	.align 4						\n\
-3:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,0($19)						\n\
-	ldq $3,8($17)						\n\
-								\n\
-	ldq $4,8($18)						\n\
-	ldq $6,16($17)						\n\
-	ldq $7,16($18)						\n\
-	ldq $21,24($17)						\n\
-								\n\
-	ldq $22,24($18)						\n\
-	ldq $24,32($17)						\n\
-	ldq $25,32($18)						\n\
-	ldq $5,8($19)						\n\
-								\n\
-	ldq $20,16($19)						\n\
-	ldq $23,24($19)						\n\
-	ldq $27,32($19)						\n\
-	nop							\n\
-								\n\
-	xor $0,$1,$1		# 8 cycles from $0 load		\n\
-	xor $3,$4,$4		# 6 cycles from $4 load		\n\
-	xor $6,$7,$7		# 6 cycles from $7 load		\n\
-	xor $21,$22,$22		# 5 cycles from $22 load	\n\
-								\n\
-	xor $1,$2,$2		# 9 cycles from $2 load		\n\
-	xor $24,$25,$25		# 5 cycles from $25 load	\n\
-	stq $2,0($17)						\n\
-	xor $4,$5,$5		# 6 cycles from $5 load		\n\
-								\n\
-	stq $5,8($17)						\n\
-	xor $7,$20,$20		# 7 cycles from $20 load	\n\
-	stq $20,16($17)						\n\
-	xor $22,$23,$23		# 7 cycles from $23 load	\n\
-								\n\
-	stq $23,24($17)						\n\
-	xor $25,$27,$27		# 7 cycles from $27 load	\n\
-	stq $27,32($17)						\n\
-	nop							\n\
-								\n\
-	ldq $0,40($17)						\n\
-	ldq $1,40($18)						\n\
-	ldq $3,48($17)						\n\
-	ldq $4,48($18)						\n\
-								\n\
-	ldq $6,56($17)						\n\
-	ldq $7,56($18)						\n\
-	ldq $2,40($19)						\n\
-	ldq $5,48($19)						\n\
-								\n\
-	ldq $20,56($19)						\n\
-	xor $0,$1,$1		# 4 cycles from $1 load		\n\
-	xor $3,$4,$4		# 5 cycles from $4 load		\n\
-	xor $6,$7,$7		# 5 cycles from $7 load		\n\
-								\n\
-	xor $1,$2,$2		# 4 cycles from $2 load		\n\
-	xor $4,$5,$5		# 5 cycles from $5 load		\n\
-	stq $2,40($17)						\n\
-	xor $7,$20,$20		# 4 cycles from $20 load	\n\
-								\n\
-	stq $5,48($17)						\n\
-	subq $16,1,$16						\n\
-	stq $20,56($17)						\n\
-	addq $19,64,$19						\n\
-								\n\
-	addq $18,64,$18						\n\
-	addq $17,64,$17						\n\
-	bgt $16,3b						\n\
-	ret							\n\
-	.end xor_alpha_3					\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_4					\n\
-xor_alpha_4:							\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-	.align 4						\n\
-4:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,0($19)						\n\
-	ldq $3,0($20)						\n\
-								\n\
-	ldq $4,8($17)						\n\
-	ldq $5,8($18)						\n\
-	ldq $6,8($19)						\n\
-	ldq $7,8($20)						\n\
-								\n\
-	ldq $21,16($17)						\n\
-	ldq $22,16($18)						\n\
-	ldq $23,16($19)						\n\
-	ldq $24,16($20)						\n\
-								\n\
-	ldq $25,24($17)						\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-	ldq $27,24($18)						\n\
-	xor $2,$3,$3		# 6 cycles from $3 load		\n\
-								\n\
-	ldq $0,24($19)						\n\
-	xor $1,$3,$3						\n\
-	ldq $1,24($20)						\n\
-	xor $4,$5,$5		# 7 cycles from $5 load		\n\
-								\n\
-	stq $3,0($17)						\n\
-	xor $6,$7,$7						\n\
-	xor $21,$22,$22		# 7 cycles from $22 load	\n\
-	xor $5,$7,$7						\n\
-								\n\
-	stq $7,8($17)						\n\
-	xor $23,$24,$24		# 7 cycles from $24 load	\n\
-	ldq $2,32($17)						\n\
-	xor $22,$24,$24						\n\
-								\n\
-	ldq $3,32($18)						\n\
-	ldq $4,32($19)						\n\
-	ldq $5,32($20)						\n\
-	xor $25,$27,$27		# 8 cycles from $27 load	\n\
-								\n\
-	ldq $6,40($17)						\n\
-	ldq $7,40($18)						\n\
-	ldq $21,40($19)						\n\
-	ldq $22,40($20)						\n\
-								\n\
-	stq $24,16($17)						\n\
-	xor $0,$1,$1		# 9 cycles from $1 load		\n\
-	xor $2,$3,$3		# 5 cycles from $3 load		\n\
-	xor $27,$1,$1						\n\
-								\n\
-	stq $1,24($17)						\n\
-	xor $4,$5,$5		# 5 cycles from $5 load		\n\
-	ldq $23,48($17)						\n\
-	ldq $24,48($18)						\n\
-								\n\
-	ldq $25,48($19)						\n\
-	xor $3,$5,$5						\n\
-	ldq $27,48($20)						\n\
-	ldq $0,56($17)						\n\
-								\n\
-	ldq $1,56($18)						\n\
-	ldq $2,56($19)						\n\
-	xor $6,$7,$7		# 8 cycles from $6 load		\n\
-	ldq $3,56($20)						\n\
-								\n\
-	stq $5,32($17)						\n\
-	xor $21,$22,$22		# 8 cycles from $22 load	\n\
-	xor $7,$22,$22						\n\
-	xor $23,$24,$24		# 5 cycles from $24 load	\n\
-								\n\
-	stq $22,40($17)						\n\
-	xor $25,$27,$27		# 5 cycles from $27 load	\n\
-	xor $24,$27,$27						\n\
-	xor $0,$1,$1		# 5 cycles from $1 load		\n\
-								\n\
-	stq $27,48($17)						\n\
-	xor $2,$3,$3		# 4 cycles from $3 load		\n\
-	xor $1,$3,$3						\n\
-	subq $16,1,$16						\n\
-								\n\
-	stq $3,56($17)						\n\
-	addq $20,64,$20						\n\
-	addq $19,64,$19						\n\
-	addq $18,64,$18						\n\
-								\n\
-	addq $17,64,$17						\n\
-	bgt $16,4b						\n\
-	ret							\n\
-	.end xor_alpha_4					\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_5					\n\
-xor_alpha_5:							\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-	.align 4						\n\
-5:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,0($19)						\n\
-	ldq $3,0($20)						\n\
-								\n\
-	ldq $4,0($21)						\n\
-	ldq $5,8($17)						\n\
-	ldq $6,8($18)						\n\
-	ldq $7,8($19)						\n\
-								\n\
-	ldq $22,8($20)						\n\
-	ldq $23,8($21)						\n\
-	ldq $24,16($17)						\n\
-	ldq $25,16($18)						\n\
-								\n\
-	ldq $27,16($19)						\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-	ldq $28,16($20)						\n\
-	xor $2,$3,$3		# 6 cycles from $3 load		\n\
-								\n\
-	ldq $0,16($21)						\n\
-	xor $1,$3,$3						\n\
-	ldq $1,24($17)						\n\
-	xor $3,$4,$4		# 7 cycles from $4 load		\n\
-								\n\
-	stq $4,0($17)						\n\
-	xor $5,$6,$6		# 7 cycles from $6 load		\n\
-	xor $7,$22,$22		# 7 cycles from $22 load	\n\
-	xor $6,$23,$23		# 7 cycles from $23 load	\n\
-								\n\
-	ldq $2,24($18)						\n\
-	xor $22,$23,$23						\n\
-	ldq $3,24($19)						\n\
-	xor $24,$25,$25		# 8 cycles from $25 load	\n\
-								\n\
-	stq $23,8($17)						\n\
-	xor $25,$27,$27		# 8 cycles from $27 load	\n\
-	ldq $4,24($20)						\n\
-	xor $28,$0,$0		# 7 cycles from $0 load		\n\
-								\n\
-	ldq $5,24($21)						\n\
-	xor $27,$0,$0						\n\
-	ldq $6,32($17)						\n\
-	ldq $7,32($18)						\n\
-								\n\
-	stq $0,16($17)						\n\
-	xor $1,$2,$2		# 6 cycles from $2 load		\n\
-	ldq $22,32($19)						\n\
-	xor $3,$4,$4		# 4 cycles from $4 load		\n\
-								\n\
-	ldq $23,32($20)						\n\
-	xor $2,$4,$4						\n\
-	ldq $24,32($21)						\n\
-	ldq $25,40($17)						\n\
-								\n\
-	ldq $27,40($18)						\n\
-	ldq $28,40($19)						\n\
-	ldq $0,40($20)						\n\
-	xor $4,$5,$5		# 7 cycles from $5 load		\n\
-								\n\
-	stq $5,24($17)						\n\
-	xor $6,$7,$7		# 7 cycles from $7 load		\n\
-	ldq $1,40($21)						\n\
-	ldq $2,48($17)						\n\
-								\n\
-	ldq $3,48($18)						\n\
-	xor $7,$22,$22		# 7 cycles from $22 load	\n\
-	ldq $4,48($19)						\n\
-	xor $23,$24,$24		# 6 cycles from $24 load	\n\
-								\n\
-	ldq $5,48($20)						\n\
-	xor $22,$24,$24						\n\
-	ldq $6,48($21)						\n\
-	xor $25,$27,$27		# 7 cycles from $27 load	\n\
-								\n\
-	stq $24,32($17)						\n\
-	xor $27,$28,$28		# 8 cycles from $28 load	\n\
-	ldq $7,56($17)						\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-								\n\
-	ldq $22,56($18)						\n\
-	ldq $23,56($19)						\n\
-	ldq $24,56($20)						\n\
-	ldq $25,56($21)						\n\
-								\n\
-	xor $28,$1,$1						\n\
-	xor $2,$3,$3		# 9 cycles from $3 load		\n\
-	xor $3,$4,$4		# 9 cycles from $4 load		\n\
-	xor $5,$6,$6		# 8 cycles from $6 load		\n\
-								\n\
-	stq $1,40($17)						\n\
-	xor $4,$6,$6						\n\
-	xor $7,$22,$22		# 7 cycles from $22 load	\n\
-	xor $23,$24,$24		# 6 cycles from $24 load	\n\
-								\n\
-	stq $6,48($17)						\n\
-	xor $22,$24,$24						\n\
-	subq $16,1,$16						\n\
-	xor $24,$25,$25		# 8 cycles from $25 load	\n\
-								\n\
-	stq $25,56($17)						\n\
-	addq $21,64,$21						\n\
-	addq $20,64,$20						\n\
-	addq $19,64,$19						\n\
-								\n\
-	addq $18,64,$18						\n\
-	addq $17,64,$17						\n\
-	bgt $16,5b						\n\
-	ret							\n\
-	.end xor_alpha_5					\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_prefetch_2				\n\
-xor_alpha_prefetch_2:						\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-								\n\
-	ldq $31, 0($17)						\n\
-	ldq $31, 0($18)						\n\
-								\n\
-	ldq $31, 64($17)					\n\
-	ldq $31, 64($18)					\n\
-								\n\
-	ldq $31, 128($17)					\n\
-	ldq $31, 128($18)					\n\
-								\n\
-	ldq $31, 192($17)					\n\
-	ldq $31, 192($18)					\n\
-	.align 4						\n\
-2:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,8($17)						\n\
-	ldq $3,8($18)						\n\
-								\n\
-	ldq $4,16($17)						\n\
-	ldq $5,16($18)						\n\
-	ldq $6,24($17)						\n\
-	ldq $7,24($18)						\n\
-								\n\
-	ldq $19,32($17)						\n\
-	ldq $20,32($18)						\n\
-	ldq $21,40($17)						\n\
-	ldq $22,40($18)						\n\
-								\n\
-	ldq $23,48($17)						\n\
-	ldq $24,48($18)						\n\
-	ldq $25,56($17)						\n\
-	ldq $27,56($18)						\n\
-								\n\
-	ldq $31,256($17)					\n\
-	xor $0,$1,$0		# 8 cycles from $1 load		\n\
-	ldq $31,256($18)					\n\
-	xor $2,$3,$2						\n\
-								\n\
-	stq $0,0($17)						\n\
-	xor $4,$5,$4						\n\
-	stq $2,8($17)						\n\
-	xor $6,$7,$6						\n\
-								\n\
-	stq $4,16($17)						\n\
-	xor $19,$20,$19						\n\
-	stq $6,24($17)						\n\
-	xor $21,$22,$21						\n\
-								\n\
-	stq $19,32($17)						\n\
-	xor $23,$24,$23						\n\
-	stq $21,40($17)						\n\
-	xor $25,$27,$25						\n\
-								\n\
-	stq $23,48($17)						\n\
-	subq $16,1,$16						\n\
-	stq $25,56($17)						\n\
-	addq $17,64,$17						\n\
-								\n\
-	addq $18,64,$18						\n\
-	bgt $16,2b						\n\
-	ret							\n\
-	.end xor_alpha_prefetch_2				\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_prefetch_3				\n\
-xor_alpha_prefetch_3:						\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-								\n\
-	ldq $31, 0($17)						\n\
-	ldq $31, 0($18)						\n\
-	ldq $31, 0($19)						\n\
-								\n\
-	ldq $31, 64($17)					\n\
-	ldq $31, 64($18)					\n\
-	ldq $31, 64($19)					\n\
-								\n\
-	ldq $31, 128($17)					\n\
-	ldq $31, 128($18)					\n\
-	ldq $31, 128($19)					\n\
-								\n\
-	ldq $31, 192($17)					\n\
-	ldq $31, 192($18)					\n\
-	ldq $31, 192($19)					\n\
-	.align 4						\n\
-3:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,0($19)						\n\
-	ldq $3,8($17)						\n\
-								\n\
-	ldq $4,8($18)						\n\
-	ldq $6,16($17)						\n\
-	ldq $7,16($18)						\n\
-	ldq $21,24($17)						\n\
-								\n\
-	ldq $22,24($18)						\n\
-	ldq $24,32($17)						\n\
-	ldq $25,32($18)						\n\
-	ldq $5,8($19)						\n\
-								\n\
-	ldq $20,16($19)						\n\
-	ldq $23,24($19)						\n\
-	ldq $27,32($19)						\n\
-	nop							\n\
-								\n\
-	xor $0,$1,$1		# 8 cycles from $0 load		\n\
-	xor $3,$4,$4		# 7 cycles from $4 load		\n\
-	xor $6,$7,$7		# 6 cycles from $7 load		\n\
-	xor $21,$22,$22		# 5 cycles from $22 load	\n\
-								\n\
-	xor $1,$2,$2		# 9 cycles from $2 load		\n\
-	xor $24,$25,$25		# 5 cycles from $25 load	\n\
-	stq $2,0($17)						\n\
-	xor $4,$5,$5		# 6 cycles from $5 load		\n\
-								\n\
-	stq $5,8($17)						\n\
-	xor $7,$20,$20		# 7 cycles from $20 load	\n\
-	stq $20,16($17)						\n\
-	xor $22,$23,$23		# 7 cycles from $23 load	\n\
-								\n\
-	stq $23,24($17)						\n\
-	xor $25,$27,$27		# 7 cycles from $27 load	\n\
-	stq $27,32($17)						\n\
-	nop							\n\
-								\n\
-	ldq $0,40($17)						\n\
-	ldq $1,40($18)						\n\
-	ldq $3,48($17)						\n\
-	ldq $4,48($18)						\n\
-								\n\
-	ldq $6,56($17)						\n\
-	ldq $7,56($18)						\n\
-	ldq $2,40($19)						\n\
-	ldq $5,48($19)						\n\
-								\n\
-	ldq $20,56($19)						\n\
-	ldq $31,256($17)					\n\
-	ldq $31,256($18)					\n\
-	ldq $31,256($19)					\n\
-								\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-	xor $3,$4,$4		# 5 cycles from $4 load		\n\
-	xor $6,$7,$7		# 5 cycles from $7 load		\n\
-	xor $1,$2,$2		# 4 cycles from $2 load		\n\
-								\n\
-	xor $4,$5,$5		# 5 cycles from $5 load		\n\
-	xor $7,$20,$20		# 4 cycles from $20 load	\n\
-	stq $2,40($17)						\n\
-	subq $16,1,$16						\n\
-								\n\
-	stq $5,48($17)						\n\
-	addq $19,64,$19						\n\
-	stq $20,56($17)						\n\
-	addq $18,64,$18						\n\
-								\n\
-	addq $17,64,$17						\n\
-	bgt $16,3b						\n\
-	ret							\n\
-	.end xor_alpha_prefetch_3				\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_prefetch_4				\n\
-xor_alpha_prefetch_4:						\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-								\n\
-	ldq $31, 0($17)						\n\
-	ldq $31, 0($18)						\n\
-	ldq $31, 0($19)						\n\
-	ldq $31, 0($20)						\n\
-								\n\
-	ldq $31, 64($17)					\n\
-	ldq $31, 64($18)					\n\
-	ldq $31, 64($19)					\n\
-	ldq $31, 64($20)					\n\
-								\n\
-	ldq $31, 128($17)					\n\
-	ldq $31, 128($18)					\n\
-	ldq $31, 128($19)					\n\
-	ldq $31, 128($20)					\n\
-								\n\
-	ldq $31, 192($17)					\n\
-	ldq $31, 192($18)					\n\
-	ldq $31, 192($19)					\n\
-	ldq $31, 192($20)					\n\
-	.align 4						\n\
-4:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,0($19)						\n\
-	ldq $3,0($20)						\n\
-								\n\
-	ldq $4,8($17)						\n\
-	ldq $5,8($18)						\n\
-	ldq $6,8($19)						\n\
-	ldq $7,8($20)						\n\
-								\n\
-	ldq $21,16($17)						\n\
-	ldq $22,16($18)						\n\
-	ldq $23,16($19)						\n\
-	ldq $24,16($20)						\n\
-								\n\
-	ldq $25,24($17)						\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-	ldq $27,24($18)						\n\
-	xor $2,$3,$3		# 6 cycles from $3 load		\n\
-								\n\
-	ldq $0,24($19)						\n\
-	xor $1,$3,$3						\n\
-	ldq $1,24($20)						\n\
-	xor $4,$5,$5		# 7 cycles from $5 load		\n\
-								\n\
-	stq $3,0($17)						\n\
-	xor $6,$7,$7						\n\
-	xor $21,$22,$22		# 7 cycles from $22 load	\n\
-	xor $5,$7,$7						\n\
-								\n\
-	stq $7,8($17)						\n\
-	xor $23,$24,$24		# 7 cycles from $24 load	\n\
-	ldq $2,32($17)						\n\
-	xor $22,$24,$24						\n\
-								\n\
-	ldq $3,32($18)						\n\
-	ldq $4,32($19)						\n\
-	ldq $5,32($20)						\n\
-	xor $25,$27,$27		# 8 cycles from $27 load	\n\
-								\n\
-	ldq $6,40($17)						\n\
-	ldq $7,40($18)						\n\
-	ldq $21,40($19)						\n\
-	ldq $22,40($20)						\n\
-								\n\
-	stq $24,16($17)						\n\
-	xor $0,$1,$1		# 9 cycles from $1 load		\n\
-	xor $2,$3,$3		# 5 cycles from $3 load		\n\
-	xor $27,$1,$1						\n\
-								\n\
-	stq $1,24($17)						\n\
-	xor $4,$5,$5		# 5 cycles from $5 load		\n\
-	ldq $23,48($17)						\n\
-	xor $3,$5,$5						\n\
-								\n\
-	ldq $24,48($18)						\n\
-	ldq $25,48($19)						\n\
-	ldq $27,48($20)						\n\
-	ldq $0,56($17)						\n\
-								\n\
-	ldq $1,56($18)						\n\
-	ldq $2,56($19)						\n\
-	ldq $3,56($20)						\n\
-	xor $6,$7,$7		# 8 cycles from $6 load		\n\
-								\n\
-	ldq $31,256($17)					\n\
-	xor $21,$22,$22		# 8 cycles from $22 load	\n\
-	ldq $31,256($18)					\n\
-	xor $7,$22,$22						\n\
-								\n\
-	ldq $31,256($19)					\n\
-	xor $23,$24,$24		# 6 cycles from $24 load	\n\
-	ldq $31,256($20)					\n\
-	xor $25,$27,$27		# 6 cycles from $27 load	\n\
-								\n\
-	stq $5,32($17)						\n\
-	xor $24,$27,$27						\n\
-	xor $0,$1,$1		# 7 cycles from $1 load		\n\
-	xor $2,$3,$3		# 6 cycles from $3 load		\n\
-								\n\
-	stq $22,40($17)						\n\
-	xor $1,$3,$3						\n\
-	stq $27,48($17)						\n\
-	subq $16,1,$16						\n\
-								\n\
-	stq $3,56($17)						\n\
-	addq $20,64,$20						\n\
-	addq $19,64,$19						\n\
-	addq $18,64,$18						\n\
-								\n\
-	addq $17,64,$17						\n\
-	bgt $16,4b						\n\
-	ret							\n\
-	.end xor_alpha_prefetch_4				\n\
-								\n\
-	.align 3						\n\
-	.ent xor_alpha_prefetch_5				\n\
-xor_alpha_prefetch_5:						\n\
-	.prologue 0						\n\
-	srl $16, 6, $16						\n\
-								\n\
-	ldq $31, 0($17)						\n\
-	ldq $31, 0($18)						\n\
-	ldq $31, 0($19)						\n\
-	ldq $31, 0($20)						\n\
-	ldq $31, 0($21)						\n\
-								\n\
-	ldq $31, 64($17)					\n\
-	ldq $31, 64($18)					\n\
-	ldq $31, 64($19)					\n\
-	ldq $31, 64($20)					\n\
-	ldq $31, 64($21)					\n\
-								\n\
-	ldq $31, 128($17)					\n\
-	ldq $31, 128($18)					\n\
-	ldq $31, 128($19)					\n\
-	ldq $31, 128($20)					\n\
-	ldq $31, 128($21)					\n\
-								\n\
-	ldq $31, 192($17)					\n\
-	ldq $31, 192($18)					\n\
-	ldq $31, 192($19)					\n\
-	ldq $31, 192($20)					\n\
-	ldq $31, 192($21)					\n\
-	.align 4						\n\
-5:								\n\
-	ldq $0,0($17)						\n\
-	ldq $1,0($18)						\n\
-	ldq $2,0($19)						\n\
-	ldq $3,0($20)						\n\
-								\n\
-	ldq $4,0($21)						\n\
-	ldq $5,8($17)						\n\
-	ldq $6,8($18)						\n\
-	ldq $7,8($19)						\n\
-								\n\
-	ldq $22,8($20)						\n\
-	ldq $23,8($21)						\n\
-	ldq $24,16($17)						\n\
-	ldq $25,16($18)						\n\
-								\n\
-	ldq $27,16($19)						\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-	ldq $28,16($20)						\n\
-	xor $2,$3,$3		# 6 cycles from $3 load		\n\
-								\n\
-	ldq $0,16($21)						\n\
-	xor $1,$3,$3						\n\
-	ldq $1,24($17)						\n\
-	xor $3,$4,$4		# 7 cycles from $4 load		\n\
-								\n\
-	stq $4,0($17)						\n\
-	xor $5,$6,$6		# 7 cycles from $6 load		\n\
-	xor $7,$22,$22		# 7 cycles from $22 load	\n\
-	xor $6,$23,$23		# 7 cycles from $23 load	\n\
-								\n\
-	ldq $2,24($18)						\n\
-	xor $22,$23,$23						\n\
-	ldq $3,24($19)						\n\
-	xor $24,$25,$25		# 8 cycles from $25 load	\n\
-								\n\
-	stq $23,8($17)						\n\
-	xor $25,$27,$27		# 8 cycles from $27 load	\n\
-	ldq $4,24($20)						\n\
-	xor $28,$0,$0		# 7 cycles from $0 load		\n\
-								\n\
-	ldq $5,24($21)						\n\
-	xor $27,$0,$0						\n\
-	ldq $6,32($17)						\n\
-	ldq $7,32($18)						\n\
-								\n\
-	stq $0,16($17)						\n\
-	xor $1,$2,$2		# 6 cycles from $2 load		\n\
-	ldq $22,32($19)						\n\
-	xor $3,$4,$4		# 4 cycles from $4 load		\n\
-								\n\
-	ldq $23,32($20)						\n\
-	xor $2,$4,$4						\n\
-	ldq $24,32($21)						\n\
-	ldq $25,40($17)						\n\
-								\n\
-	ldq $27,40($18)						\n\
-	ldq $28,40($19)						\n\
-	ldq $0,40($20)						\n\
-	xor $4,$5,$5		# 7 cycles from $5 load		\n\
-								\n\
-	stq $5,24($17)						\n\
-	xor $6,$7,$7		# 7 cycles from $7 load		\n\
-	ldq $1,40($21)						\n\
-	ldq $2,48($17)						\n\
-								\n\
-	ldq $3,48($18)						\n\
-	xor $7,$22,$22		# 7 cycles from $22 load	\n\
-	ldq $4,48($19)						\n\
-	xor $23,$24,$24		# 6 cycles from $24 load	\n\
-								\n\
-	ldq $5,48($20)						\n\
-	xor $22,$24,$24						\n\
-	ldq $6,48($21)						\n\
-	xor $25,$27,$27		# 7 cycles from $27 load	\n\
-								\n\
-	stq $24,32($17)						\n\
-	xor $27,$28,$28		# 8 cycles from $28 load	\n\
-	ldq $7,56($17)						\n\
-	xor $0,$1,$1		# 6 cycles from $1 load		\n\
-								\n\
-	ldq $22,56($18)						\n\
-	ldq $23,56($19)						\n\
-	ldq $24,56($20)						\n\
-	ldq $25,56($21)						\n\
-								\n\
-	ldq $31,256($17)					\n\
-	xor $28,$1,$1						\n\
-	ldq $31,256($18)					\n\
-	xor $2,$3,$3		# 9 cycles from $3 load		\n\
-								\n\
-	ldq $31,256($19)					\n\
-	xor $3,$4,$4		# 9 cycles from $4 load		\n\
-	ldq $31,256($20)					\n\
-	xor $5,$6,$6		# 8 cycles from $6 load		\n\
-								\n\
-	stq $1,40($17)						\n\
-	xor $4,$6,$6						\n\
-	xor $7,$22,$22		# 7 cycles from $22 load	\n\
-	xor $23,$24,$24		# 6 cycles from $24 load	\n\
-								\n\
-	stq $6,48($17)						\n\
-	xor $22,$24,$24						\n\
-	ldq $31,256($21)					\n\
-	xor $24,$25,$25		# 8 cycles from $25 load	\n\
-								\n\
-	stq $25,56($17)						\n\
-	subq $16,1,$16						\n\
-	addq $21,64,$21						\n\
-	addq $20,64,$20						\n\
-								\n\
-	addq $19,64,$19						\n\
-	addq $18,64,$18						\n\
-	addq $17,64,$17						\n\
-	bgt $16,5b						\n\
-								\n\
-	ret							\n\
-	.end xor_alpha_prefetch_5				\n\
-");
-
-static struct xor_block_template xor_block_alpha = {
-	.name	= "alpha",
-	.do_2	= xor_alpha_2,
-	.do_3	= xor_alpha_3,
-	.do_4	= xor_alpha_4,
-	.do_5	= xor_alpha_5,
-};
-
-static struct xor_block_template xor_block_alpha_prefetch = {
-	.name	= "alpha prefetch",
-	.do_2	= xor_alpha_prefetch_2,
-	.do_3	= xor_alpha_prefetch_3,
-	.do_4	= xor_alpha_prefetch_4,
-	.do_5	= xor_alpha_prefetch_5,
-};
-
-/* For grins, also test the generic routines.  */
-#include <asm-generic/xor.h>
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES				\
-	do {						\
-		xor_speed(&xor_block_8regs);		\
-		xor_speed(&xor_block_32regs);		\
-		xor_speed(&xor_block_alpha);		\
-		xor_speed(&xor_block_alpha_prefetch);	\
-	} while (0)
-
-/* Force the use of alpha_prefetch if EV6, as it is significantly
-   faster in the cold cache case.  */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
-	(implver() == IMPLVER_EV6 ? &xor_block_alpha_prefetch : FASTEST)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/Makefile b/ANDROID_3.4.5/arch/alpha/kernel/Makefile
deleted file mode 100644
index 7a6d908b..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y		:= head.o vmlinux.lds
-asflags-y	:= $(KBUILD_CFLAGS)
-ccflags-y	:= -Wno-sign-compare
-
-obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
-	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    alpha_ksyms.o systbls.o err_common.o io.o
-
-obj-$(CONFIG_VGA_HOSE)	+= console.o
-obj-$(CONFIG_SMP)	+= smp.o
-obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o pci-sysfs.o
-obj-$(CONFIG_SRM_ENV)	+= srm_env.o
-obj-$(CONFIG_MODULES)	+= module.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-
-ifdef CONFIG_ALPHA_GENERIC
-
-obj-y 	 += core_apecs.o core_cia.o core_irongate.o core_lca.o \
-	    core_mcpcia.o core_polaris.o core_t2.o \
-	    core_tsunami.o
-
-obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
-	    sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
-	    sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
-	    sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
-
-ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
-obj-y	 += core_marvel.o core_titan.o core_wildfire.o
-obj-y	 += sys_marvel.o sys_titan.o sys_wildfire.o
-obj-y    += err_ev7.o err_titan.o err_marvel.o
-endif
-
-obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
-obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
-obj-y    += srmcons.o
-
-else
-
-# Misc support
-obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
-
-ifdef CONFIG_BINFMT_AOUT
-obj-y	+= binfmt_loader.o
-endif
-
-# Core logic support
-obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
-obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
-obj-$(CONFIG_ALPHA_IRONGATE)	+= core_irongate.o
-obj-$(CONFIG_ALPHA_LCA)		+= core_lca.o
-obj-$(CONFIG_ALPHA_MARVEL)	+= core_marvel.o gct.o
-obj-$(CONFIG_ALPHA_MCPCIA)	+= core_mcpcia.o
-obj-$(CONFIG_ALPHA_POLARIS)	+= core_polaris.o
-obj-$(CONFIG_ALPHA_T2)		+= core_t2.o
-obj-$(CONFIG_ALPHA_TSUNAMI)	+= core_tsunami.o
-obj-$(CONFIG_ALPHA_TITAN)	+= core_titan.o
-obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
-
-# Board support
-obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   smc37c93x.o
-obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   smc37c93x.o
-obj-$(CONFIG_ALPHA_DP264)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
-obj-$(CONFIG_ALPHA_SHARK)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
-obj-$(CONFIG_ALPHA_TITAN)	+= sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P)	+= sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66)	+= sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EIGER)	+= sys_eiger.o irq_i8259.o
-obj-$(CONFIG_ALPHA_JENSEN)	+= sys_jensen.o pci-noop.o irq_i8259.o
-obj-$(CONFIG_ALPHA_MARVEL)	+= sys_marvel.o 
-obj-$(CONFIG_ALPHA_MIATA)	+= sys_miata.o irq_pyxis.o irq_i8259.o \
-				   es1888.o smc37c669.o
-obj-$(CONFIG_ALPHA_MIKASA)	+= sys_mikasa.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_NAUTILUS)	+= sys_nautilus.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_NORITAKE)	+= sys_noritake.o irq_i8259.o
-obj-$(CONFIG_ALPHA_RAWHIDE)	+= sys_rawhide.o irq_i8259.o
-obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
-obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
-obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
-				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
-obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
-
-# Error support
-obj-$(CONFIG_ALPHA_MARVEL)	+= err_ev7.o err_marvel.o
-obj-$(CONFIG_ALPHA_NAUTILUS)	+= err_ev6.o
-obj-$(CONFIG_ALPHA_TITAN)	+= err_ev6.o err_titan.o
-
-endif # GENERIC
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/alpha_ksyms.c b/ANDROID_3.4.5/arch/alpha/kernel/alpha_ksyms.c
deleted file mode 100644
index d96e742d..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/alpha_ksyms.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * linux/arch/alpha/kernel/alpha_ksyms.c
- *
- * Export the alpha-specific functions that are needed for loadable
- * modules.
- */
-
-#include <linux/module.h>
-#include <asm/console.h>
-#include <asm/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/fpu.h>
-#include <asm/machvec.h>
-
-#include <linux/syscalls.h>
-
-/* these are C runtime functions with special calling conventions: */
-extern void __divl (void);
-extern void __reml (void);
-extern void __divq (void);
-extern void __remq (void);
-extern void __divlu (void);
-extern void __remlu (void);
-extern void __divqu (void);
-extern void __remqu (void);
-
-EXPORT_SYMBOL(alpha_mv);
-EXPORT_SYMBOL(callback_getenv);
-EXPORT_SYMBOL(callback_setenv);
-EXPORT_SYMBOL(callback_save_env);
-
-/* platform dependent support */
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(__memcpy);
-EXPORT_SYMBOL(__memset);
-EXPORT_SYMBOL(__memsetw);
-EXPORT_SYMBOL(__constant_c_memset);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(clear_page);
-
-EXPORT_SYMBOL(alpha_read_fp_reg);
-EXPORT_SYMBOL(alpha_read_fp_reg_s);
-EXPORT_SYMBOL(alpha_write_fp_reg);
-EXPORT_SYMBOL(alpha_write_fp_reg_s);
-
-/* entry.S */
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(kernel_execve);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_tcpudp_magic);
-EXPORT_SYMBOL(ip_compute_csum);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-EXPORT_SYMBOL(csum_ipv6_magic);
-
-#ifdef CONFIG_MATHEMU_MODULE
-extern long (*alpha_fp_emul_imprecise)(struct pt_regs *, unsigned long);
-extern long (*alpha_fp_emul) (unsigned long pc);
-EXPORT_SYMBOL(alpha_fp_emul_imprecise);
-EXPORT_SYMBOL(alpha_fp_emul);
-#endif
-
-/*
- * The following are specially called from the uaccess assembly stubs.
- */
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(__do_clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-/* 
- * SMP-specific symbols.
- */
-
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(_atomic_dec_and_lock);
-#endif /* CONFIG_SMP */
-
-/*
- * The following are special because they're not called
- * explicitly (the C compiler or assembler generates them in
- * response to division operations).  Fortunately, their
- * interface isn't gonna change any time soon now, so it's OK
- * to leave it out of version control.
- */
-# undef memcpy
-# undef memset
-EXPORT_SYMBOL(__divl);
-EXPORT_SYMBOL(__divlu);
-EXPORT_SYMBOL(__divq);
-EXPORT_SYMBOL(__divqu);
-EXPORT_SYMBOL(__reml);
-EXPORT_SYMBOL(__remlu);
-EXPORT_SYMBOL(__remq);
-EXPORT_SYMBOL(__remqu);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memchr);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/asm-offsets.c b/ANDROID_3.4.5/arch/alpha/kernel/asm-offsets.c
deleted file mode 100644
index 6ff8886e..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/asm-offsets.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- */
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/kbuild.h>
-#include <asm/io.h>
-
-void foo(void)
-{
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	BLANK();
-
-        DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-        DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
-        DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
-        DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
-        DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
-        BLANK();
-
-        DEFINE(CRED_UID,  offsetof(struct cred, uid));
-        DEFINE(CRED_EUID, offsetof(struct cred, euid));
-        DEFINE(CRED_GID,  offsetof(struct cred, gid));
-        DEFINE(CRED_EGID, offsetof(struct cred, egid));
-        BLANK();
-
-	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(SIGCHLD, SIGCHLD);
-	BLANK();
-
-	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
-	DEFINE(HAE_REG, offsetof(struct alpha_machine_vector, hae_register));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/binfmt_loader.c b/ANDROID_3.4.5/arch/alpha/kernel/binfmt_loader.c
deleted file mode 100644
index d1f474d1..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/binfmt_loader.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm_types.h>
-#include <linux/binfmts.h>
-#include <linux/a.out.h>
-
-static int load_binary(struct linux_binprm *bprm, struct pt_regs *regs)
-{
-	struct exec *eh = (struct exec *)bprm->buf;
-	unsigned long loader;
-	struct file *file;
-	int retval;
-
-	if (eh->fh.f_magic != 0x183 || (eh->fh.f_flags & 0x3000) != 0x3000)
-		return -ENOEXEC;
-
-	if (bprm->loader)
-		return -ENOEXEC;
-
-	allow_write_access(bprm->file);
-	fput(bprm->file);
-	bprm->file = NULL;
-
-	loader = bprm->vma->vm_end - sizeof(void *);
-
-	file = open_exec("/sbin/loader");
-	retval = PTR_ERR(file);
-	if (IS_ERR(file))
-		return retval;
-
-	/* Remember if the application is TASO.  */
-	bprm->taso = eh->ah.entry < 0x100000000UL;
-
-	bprm->file = file;
-	bprm->loader = loader;
-	retval = prepare_binprm(bprm);
-	if (retval < 0)
-		return retval;
-	return search_binary_handler(bprm,regs);
-}
-
-static struct linux_binfmt loader_format = {
-	.load_binary	= load_binary,
-};
-
-static int __init init_loader_binfmt(void)
-{
-	insert_binfmt(&loader_format);
-	return 0;
-}
-arch_initcall(init_loader_binfmt);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/console.c b/ANDROID_3.4.5/arch/alpha/kernel/console.c
deleted file mode 100644
index da711e37..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/console.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/console.c
- *
- * Architecture-specific specific support for VGA device on 
- * non-0 I/O hose
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/vt.h>
-#include <asm/vga.h>
-#include <asm/machvec.h>
-
-#include "pci_impl.h"
-
-#ifdef CONFIG_VGA_HOSE
-
-struct pci_controller *pci_vga_hose;
-static struct resource alpha_vga = {
-	.name	= "alpha-vga+",
-	.start	= 0x3C0,
-	.end	= 0x3DF
-};
-
-static struct pci_controller * __init 
-default_vga_hose_select(struct pci_controller *h1, struct pci_controller *h2)
-{
-	if (h2->index < h1->index)
-		return h2;
-
-	return h1;
-}
-
-void __init 
-locate_and_init_vga(void *(*sel_func)(void *, void *))
-{
-	struct pci_controller *hose = NULL;
-	struct pci_dev *dev = NULL;
-
-	/* Default the select function */
-	if (!sel_func) sel_func = (void *)default_vga_hose_select;
-
-	/* Find the console VGA device */
-	for(dev=NULL; (dev=pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, dev));) {
-		if (!hose)
-			hose = dev->sysdata;
-		else
-			hose = sel_func(hose, dev->sysdata);
-	}
-
-	/* Did we already initialize the correct one? Is there one? */
-	if (!hose || (conswitchp == &vga_con && pci_vga_hose == hose))
-		return;
-
-	/* Create a new VGA ioport resource WRT the hose it is on. */
-	alpha_vga.start += hose->io_space->start;
-	alpha_vga.end += hose->io_space->start;
-	request_resource(hose->io_space, &alpha_vga);
-
-	/* Set the VGA hose and init the new console. */
-	pci_vga_hose = hose;
-	take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
-}
-
-void __init
-find_console_vga_hose(void)
-{
-	u64 *pu64 = (u64 *)((u64)hwrpb + hwrpb->ctbt_offset);
-
-	if (pu64[7] == 3) {	/* TERM_TYPE == graphics */
-		struct pci_controller *hose;
-		int h = (pu64[30] >> 24) & 0xff;	/* console hose # */
-
-		/*
-		 * Our hose numbering DOES match the console's, so find
-		 * the right one...
-		 */
-		for (hose = hose_head; hose; hose = hose->next) {
-			if (hose->index == h) break;
-		}
-
-		if (hose) {
-			printk("Console graphics on hose %d\n", h);
-			pci_vga_hose = hose;
-		}
-	}
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_apecs.c b/ANDROID_3.4.5/arch/alpha/kernel/core_apecs.c
deleted file mode 100644
index 708c831e..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_apecs.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args)	printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip	volatile unsigned int  *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-	      " pci_addr=0x%p, type1=0x%p)\n",
-	      bus, device_fn, where, pci_addr, type1));
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-
-		/* type 0 configuration cycle: */
-
-		if (device > 20) {
-			DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
-			      device));
-			return -1;
-		}
-
-		*type1 = 0;
-		addr = (device_fn << 8) | (where);
-	} else {
-		/* type 1 configuration cycle: */
-		*type1 = 1;
-		addr = (bus << 16) | (device_fn << 8) | (where);
-	}
-	*pci_addr = addr;
-	DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0, value;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-	DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-		DBGC(("conf_read: TYPE1 access\n"));
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-
-	/* Some SRMs step on these registers during a machine check.  */
-	asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
-		     : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
-	if (mcheck_taken(0)) {
-		mcheck_taken(0) = 0;
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-		value = 0xffffffff;
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	mb();
-	mb();  /* magic */
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		  int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops = 
-{
-	.read =		apecs_read_config,
-	.write =	apecs_write_config,
-};
-
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vip)APECS_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-apecs_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = APECS_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 1 is direct access 1GB at 1GB
-	 * Window 2 is scatter-gather 8MB at 8MB (for isa)
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
-	*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
-	*(vuip)APECS_IOC_TB1R = 0;
-
-	*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
-	*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
-	apecs_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Finally, clear the HAXR2 register, which gets used
-	 * for PCI Config Space accesses. That is the way
-	 * we want to use it, and we do not want to depend on
-	 * what ARC or SRM might have left behind...
-	 */
-	*(vuip)APECS_IOC_HAXR2 = 0;
-	mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
-	unsigned int jd;
-
-	jd = *(vuip)APECS_IOC_DCSR;
-	if (jd & 0xffe0L) {
-		*(vuip)APECS_IOC_SEAR;
-		*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
-		mb();
-		*(vuip)APECS_IOC_DCSR;
-	}
-	*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
-	mb();
-	*(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header;
-	struct el_apecs_procdata *mchk_procdata;
-	struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	mchk_procdata = (struct el_apecs_procdata *)
-		(la_ptr + mchk_header->proc_offset
-		 - sizeof(mchk_procdata->paltemp));
-
-	mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
-		(la_ptr + mchk_header->sys_offset);
-
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);		/* reset machine check pending flag */
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "APECS",
-			    (mcheck_expected(0)
-			     && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_cia.c b/ANDROID_3.4.5/arch/alpha/kernel/core_cia.c
deleted file mode 100644
index c44339e1..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_cia.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_cia.c
- *
- * Written by David A Rusling (david.rusling@reo.mts.dec.com).
- * December 1995.
- *
- *	Copyright (C) 1995  David A Rusling
- *	Copyright (C) 1997, 1998  Jay Estabrook
- *	Copyright (C) 1998, 1999, 2000  Richard Henderson
- *
- * Code common to all CIA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_cia.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/ptrace.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-#define DEBUG_CONFIG 0
-#if DEBUG_CONFIG
-# define DBGC(args)	printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vip	volatile int  *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address.  It is therefore not safe to have
- * concurrent invocations to configuration space access routines, but
- * there really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *bus_dev, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	u8 bus = bus_dev->number;
-
-	*type1 = (bus != 0);
-	*pci_addr = (bus << 16) | (device_fn << 8) | where;
-
-	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-	      " returning address 0x%p\n"
-	      bus, device_fn, where, *pci_addr));
-
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned long flags;
-	int stat0, value;
-	int cia_cfg = 0;
-
-	DBGC(("conf_read(addr=0x%lx, type1=%d) ", addr, type1));
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vip)CIA_IOC_CIA_ERR;
-	*(vip)CIA_IOC_CIA_ERR = stat0;
-	mb();
-	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
-
-	/* If Type1 access, must set CIA CFG. */
-	if (type1) {
-		cia_cfg = *(vip)CIA_IOC_CFG;
-		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
-		mb();
-		*(vip)CIA_IOC_CFG;
-	}
-
-	mb();
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-	value = *(vip)addr;
-	mb();
-	mb();  /* magic */
-	if (mcheck_taken(0)) {
-		mcheck_taken(0) = 0;
-		value = 0xffffffff;
-		mb();
-	}
-	mcheck_expected(0) = 0;
-	mb();
-
-	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
-	if (type1) {
-		*(vip)CIA_IOC_CFG = cia_cfg;
-		mb();
-		*(vip)CIA_IOC_CFG;
-	}
-
-	local_irq_restore(flags);
-	DBGC(("done\n"));
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned long flags;
-	int stat0, cia_cfg = 0;
-
-	DBGC(("conf_write(addr=0x%lx, type1=%d) ", addr, type1));
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vip)CIA_IOC_CIA_ERR;
-	*(vip)CIA_IOC_CIA_ERR = stat0;
-	mb();
-	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
-
-	/* If Type1 access, must set CIA CFG.  */
-	if (type1) {
-		cia_cfg = *(vip)CIA_IOC_CFG;
-		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
-		mb();
-		*(vip)CIA_IOC_CFG;
-	}
-
-	mb();
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-	*(vip)addr = value;
-	mb();
-	*(vip)addr; /* read back to force the write */
-
-	mcheck_expected(0) = 0;
-	mb();
-
-	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
-	if (type1) {
-		*(vip)CIA_IOC_CFG = cia_cfg;
-		mb();
-		*(vip)CIA_IOC_CFG;
-	}
-
-	local_irq_restore(flags);
-	DBGC(("done\n"));
-}
-
-static int 
-cia_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		u32 *value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	unsigned char type1;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + CIA_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-cia_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		 u32 value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + CIA_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops cia_pci_ops = 
-{
-	.read = 	cia_read_config,
-	.write =	cia_write_config,
-};
-
-/*
- * CIA Pass 1 and PYXIS Pass 1 and 2 have a broken scatter-gather tlb.
- * It cannot be invalidated.  Rather than hard code the pass numbers,
- * actually try the tbia to see if it works.
- */
-
-void
-cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vip)CIA_IOC_PCI_TBIA = 3;	/* Flush all locked and unlocked.  */
-	mb();
-	*(vip)CIA_IOC_PCI_TBIA;
-}
-
-/*
- * On PYXIS, even if the tbia works, we cannot use it. It effectively locks
- * the chip (as well as direct write to the tag registers) if there is a
- * SG DMA operation in progress. This is true at least for PYXIS rev. 1,
- * so always use the method below.
- */
-/*
- * This is the method NT and NetBSD use.
- *
- * Allocate mappings, and put the chip into DMA loopback mode to read a
- * garbage page.  This works by causing TLB misses, causing old entries to
- * be purged to make room for the new entries coming in for the garbage page.
- */
-
-#define CIA_BROKEN_TBIA_BASE	0x30000000
-#define CIA_BROKEN_TBIA_SIZE	1024
-
-/* Always called with interrupts disabled */
-void
-cia_pci_tbi_try2(struct pci_controller *hose,
-		 dma_addr_t start, dma_addr_t end)
-{
-	void __iomem *bus_addr;
-	int ctrl;
-
-	/* Put the chip into PCI loopback mode.  */
-	mb();
-	ctrl = *(vip)CIA_IOC_CIA_CTRL;
-	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
-	mb();
-	*(vip)CIA_IOC_CIA_CTRL;
-	mb();
-
-	/* Read from PCI dense memory space at TBI_ADDR, skipping 32k on
-	   each read.  This forces SG TLB misses.  NetBSD claims that the
-	   TLB entries are not quite LRU, meaning that we need to read more
-	   times than there are actual tags.  The 2117x docs claim strict
-	   round-robin.  Oh well, we've come this far...  */
-	/* Even better - as seen on the PYXIS rev 1 the TLB tags 0-3 can
-	   be filled by the TLB misses *only once* after being invalidated
-	   (by tbia or direct write). Next misses won't update them even
-	   though the lock bits are cleared. Tags 4-7 are "quite LRU" though,
-	   so use them and read at window 3 base exactly 4 times. Reading
-	   more sometimes makes the chip crazy.  -ink */
-
-	bus_addr = cia_ioremap(CIA_BROKEN_TBIA_BASE, 32768 * 4);
-
-	cia_readl(bus_addr + 0x00000);
-	cia_readl(bus_addr + 0x08000);
-	cia_readl(bus_addr + 0x10000);
-	cia_readl(bus_addr + 0x18000);
-
-	cia_iounmap(bus_addr);
-
-	/* Restore normal PCI operation.  */
-	mb();
-	*(vip)CIA_IOC_CIA_CTRL = ctrl;
-	mb();
-	*(vip)CIA_IOC_CIA_CTRL;
-	mb();
-}
-
-static inline void
-cia_prepare_tbia_workaround(int window)
-{
-	unsigned long *ppte, pte;
-	long i;
-
-	/* Use minimal 1K map. */
-	ppte = __alloc_bootmem(CIA_BROKEN_TBIA_SIZE, 32768, 0);
-	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
-
-	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
-		ppte[i] = pte;
-
-	*(vip)CIA_IOC_PCI_Wn_BASE(window) = CIA_BROKEN_TBIA_BASE | 3;
-	*(vip)CIA_IOC_PCI_Wn_MASK(window)
-	  = (CIA_BROKEN_TBIA_SIZE*1024 - 1) & 0xfff00000;
-	*(vip)CIA_IOC_PCI_Tn_BASE(window) = virt_to_phys(ppte) >> 2;
-}
-
-static void __init
-verify_tb_operation(void)
-{
-	static int page[PAGE_SIZE/4]
-		__attribute__((aligned(PAGE_SIZE)))
-		__initdata = { 0 };
-
-	struct pci_iommu_arena *arena = pci_isa_hose->sg_isa;
-	int ctrl, addr0, tag0, pte0, data0;
-	int temp, use_tbia_try2 = 0;
-	void __iomem *bus_addr;
-
-	/* pyxis -- tbia is broken */
-	if (pci_isa_hose->dense_io_base)
-		use_tbia_try2 = 1;
-
-	/* Put the chip into PCI loopback mode.  */
-	mb();
-	ctrl = *(vip)CIA_IOC_CIA_CTRL;
-	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
-	mb();
-	*(vip)CIA_IOC_CIA_CTRL;
-	mb();
-
-	/* Write a valid entry directly into the TLB registers.  */
-
-	addr0 = arena->dma_base;
-	tag0 = addr0 | 1;
-	pte0 = (virt_to_phys(page) >> (PAGE_SHIFT - 1)) | 1;
-
-	*(vip)CIA_IOC_TB_TAGn(0) = tag0;
-	*(vip)CIA_IOC_TB_TAGn(1) = 0;
-	*(vip)CIA_IOC_TB_TAGn(2) = 0;
-	*(vip)CIA_IOC_TB_TAGn(3) = 0;
-	*(vip)CIA_IOC_TB_TAGn(4) = 0;
-	*(vip)CIA_IOC_TB_TAGn(5) = 0;
-	*(vip)CIA_IOC_TB_TAGn(6) = 0;
-	*(vip)CIA_IOC_TB_TAGn(7) = 0;
-	*(vip)CIA_IOC_TBn_PAGEm(0,0) = pte0;
-	*(vip)CIA_IOC_TBn_PAGEm(0,1) = 0;
-	*(vip)CIA_IOC_TBn_PAGEm(0,2) = 0;
-	*(vip)CIA_IOC_TBn_PAGEm(0,3) = 0;
-	mb();
-
-	/* Get a usable bus address */
-	bus_addr = cia_ioremap(addr0, 8*PAGE_SIZE);
-
-	/* First, verify we can read back what we've written.  If
-	   this fails, we can't be sure of any of the other testing
-	   we're going to do, so bail.  */
-	/* ??? Actually, we could do the work with machine checks.
-	   By passing this register update test, we pretty much
-	   guarantee that cia_pci_tbi_try1 works.  If this test
-	   fails, cia_pci_tbi_try2 might still work.  */
-
-	temp = *(vip)CIA_IOC_TB_TAGn(0);
-	if (temp != tag0) {
-		printk("pci: failed tb register update test "
-		       "(tag0 %#x != %#x)\n", temp, tag0);
-		goto failed;
-	}
-	temp = *(vip)CIA_IOC_TB_TAGn(1);
-	if (temp != 0) {
-		printk("pci: failed tb register update test "
-		       "(tag1 %#x != 0)\n", temp);
-		goto failed;
-	}
-	temp = *(vip)CIA_IOC_TBn_PAGEm(0,0);
-	if (temp != pte0) {
-		printk("pci: failed tb register update test "
-		       "(pte0 %#x != %#x)\n", temp, pte0);
-		goto failed;
-	}
-	printk("pci: passed tb register update test\n");
-
-	/* Second, verify we can actually do I/O through this entry.  */
-
-	data0 = 0xdeadbeef;
-	page[0] = data0;
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-	temp = cia_readl(bus_addr);
-	mb();
-	mcheck_expected(0) = 0;
-	mb();
-	if (mcheck_taken(0)) {
-		printk("pci: failed sg loopback i/o read test (mcheck)\n");
-		goto failed;
-	}
-	if (temp != data0) {
-		printk("pci: failed sg loopback i/o read test "
-		       "(%#x != %#x)\n", temp, data0);
-		goto failed;
-	}
-	printk("pci: passed sg loopback i/o read test\n");
-
-	/* Third, try to invalidate the TLB.  */
-
-	if (! use_tbia_try2) {
-		cia_pci_tbi(arena->hose, 0, -1);
-		temp = *(vip)CIA_IOC_TB_TAGn(0);
-		if (temp & 1) {
-			use_tbia_try2 = 1;
-			printk("pci: failed tbia test; workaround available\n");
-		} else {
-			printk("pci: passed tbia test\n");
-		}
-	}
-
-	/* Fourth, verify the TLB snoops the EV5's caches when
-	   doing a tlb fill.  */
-
-	data0 = 0x5adda15e;
-	page[0] = data0;
-	arena->ptes[4] = pte0;
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-	temp = cia_readl(bus_addr + 4*PAGE_SIZE);
-	mb();
-	mcheck_expected(0) = 0;
-	mb();
-	if (mcheck_taken(0)) {
-		printk("pci: failed pte write cache snoop test (mcheck)\n");
-		goto failed;
-	}
-	if (temp != data0) {
-		printk("pci: failed pte write cache snoop test "
-		       "(%#x != %#x)\n", temp, data0);
-		goto failed;
-	}
-	printk("pci: passed pte write cache snoop test\n");
-
-	/* Fifth, verify that a previously invalid PTE entry gets
-	   filled from the page table.  */
-
-	data0 = 0xabcdef12;
-	page[0] = data0;
-	arena->ptes[5] = pte0;
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-	temp = cia_readl(bus_addr + 5*PAGE_SIZE);
-	mb();
-	mcheck_expected(0) = 0;
-	mb();
-	if (mcheck_taken(0)) {
-		printk("pci: failed valid tag invalid pte reload test "
-		       "(mcheck; workaround available)\n");
-		/* Work around this bug by aligning new allocations
-		   on 4 page boundaries.  */
-		arena->align_entry = 4;
-	} else if (temp != data0) {
-		printk("pci: failed valid tag invalid pte reload test "
-		       "(%#x != %#x)\n", temp, data0);
-		goto failed;
-	} else {
-		printk("pci: passed valid tag invalid pte reload test\n");
-	}
-
-	/* Sixth, verify machine checks are working.  Test invalid
-	   pte under the same valid tag as we used above.  */
-
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-	temp = cia_readl(bus_addr + 6*PAGE_SIZE);
-	mb();
-	mcheck_expected(0) = 0;
-	mb();
-	printk("pci: %s pci machine check test\n",
-	       mcheck_taken(0) ? "passed" : "failed");
-
-	/* Clean up after the tests.  */
-	arena->ptes[4] = 0;
-	arena->ptes[5] = 0;
-
-	if (use_tbia_try2) {
-		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
-
-		/* Tags 0-3 must be disabled if we use this workaraund. */
-		wmb();
-		*(vip)CIA_IOC_TB_TAGn(0) = 2;
-		*(vip)CIA_IOC_TB_TAGn(1) = 2;
-		*(vip)CIA_IOC_TB_TAGn(2) = 2;
-		*(vip)CIA_IOC_TB_TAGn(3) = 2;
-
-		printk("pci: tbia workaround enabled\n");
-	}
-	alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
-
-exit:
-	/* unmap the bus addr */
-	cia_iounmap(bus_addr);
-
-	/* Restore normal PCI operation.  */
-	mb();
-	*(vip)CIA_IOC_CIA_CTRL = ctrl;
-	mb();
-	*(vip)CIA_IOC_CIA_CTRL;
-	mb();
-	return;
-
-failed:
-	printk("pci: disabling sg translation window\n");
-	*(vip)CIA_IOC_PCI_W0_BASE = 0;
-	*(vip)CIA_IOC_PCI_W1_BASE = 0;
-	pci_isa_hose->sg_isa = NULL;
-	alpha_mv.mv_pci_tbi = NULL;
-	goto exit;
-}
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save CIA configuration data as the console had it set up.  */
-struct 
-{
-    unsigned int hae_mem;
-    unsigned int hae_io;
-    unsigned int pci_dac_offset;
-    unsigned int err_mask;
-    unsigned int cia_ctrl;
-    unsigned int cia_cnfg;
-    struct {
-	unsigned int w_base;
-	unsigned int w_mask;
-	unsigned int t_base;
-    } window[4];
-} saved_config __attribute((common));
-
-void
-cia_save_srm_settings(int is_pyxis)
-{
-	int i;
-
-	/* Save some important registers. */
-	saved_config.err_mask       = *(vip)CIA_IOC_ERR_MASK;
-	saved_config.cia_ctrl       = *(vip)CIA_IOC_CIA_CTRL;
-	saved_config.hae_mem        = *(vip)CIA_IOC_HAE_MEM;
-	saved_config.hae_io         = *(vip)CIA_IOC_HAE_IO;
-	saved_config.pci_dac_offset = *(vip)CIA_IOC_PCI_W_DAC;
-
-	if (is_pyxis)
-	    saved_config.cia_cnfg   = *(vip)CIA_IOC_CIA_CNFG;
-	else
-	    saved_config.cia_cnfg   = 0;
-
-	/* Save DMA windows configuration. */
-	for (i = 0; i < 4; i++) {
-	    saved_config.window[i].w_base = *(vip)CIA_IOC_PCI_Wn_BASE(i);
-	    saved_config.window[i].w_mask = *(vip)CIA_IOC_PCI_Wn_MASK(i);
-	    saved_config.window[i].t_base = *(vip)CIA_IOC_PCI_Tn_BASE(i);
-	}
-	mb();
-}
-
-void
-cia_restore_srm_settings(void)
-{
-	int i;
-
-	for (i = 0; i < 4; i++) {
-	    *(vip)CIA_IOC_PCI_Wn_BASE(i) = saved_config.window[i].w_base;
-	    *(vip)CIA_IOC_PCI_Wn_MASK(i) = saved_config.window[i].w_mask;
-	    *(vip)CIA_IOC_PCI_Tn_BASE(i) = saved_config.window[i].t_base;
-	}
-
-	*(vip)CIA_IOC_HAE_MEM   = saved_config.hae_mem;
-	*(vip)CIA_IOC_HAE_IO    = saved_config.hae_io;
-	*(vip)CIA_IOC_PCI_W_DAC = saved_config.pci_dac_offset;	
-	*(vip)CIA_IOC_ERR_MASK  = saved_config.err_mask;
-	*(vip)CIA_IOC_CIA_CTRL  = saved_config.cia_ctrl;
-
-	if (saved_config.cia_cnfg) /* Must be pyxis. */
-	    *(vip)CIA_IOC_CIA_CNFG  = saved_config.cia_cnfg;
-
-	mb();
-}
-#else /* ALPHA_RESTORE_SRM_SETUP */
-#define cia_save_srm_settings(p)	do {} while (0)
-#define cia_restore_srm_settings()	do {} while (0)
-#endif /* ALPHA_RESTORE_SRM_SETUP */
-
-
-static void __init
-do_init_arch(int is_pyxis)
-{
-	struct pci_controller *hose;
-	int temp, cia_rev, tbia_window;
-
-	cia_rev = *(vip)CIA_IOC_CIA_REV & CIA_REV_MASK;
-	printk("pci: cia revision %d%s\n",
-	       cia_rev, is_pyxis ? " (pyxis)" : "");
-
-	if (alpha_using_srm)
-		cia_save_srm_settings(is_pyxis);
-
-	/* Set up error reporting.  */
-	temp = *(vip)CIA_IOC_ERR_MASK;
-	temp &= ~(CIA_ERR_CPU_PE | CIA_ERR_MEM_NEM | CIA_ERR_PA_PTE_INV
-		  | CIA_ERR_RCVD_MAS_ABT | CIA_ERR_RCVD_TAR_ABT);
-	*(vip)CIA_IOC_ERR_MASK = temp;
-
-	/* Clear all currently pending errors.  */
-	temp = *(vip)CIA_IOC_CIA_ERR;
-	*(vip)CIA_IOC_CIA_ERR = temp;
-
-	/* Turn on mchecks.  */
-	temp = *(vip)CIA_IOC_CIA_CTRL;
-	temp |= CIA_CTRL_FILL_ERR_EN | CIA_CTRL_MCHK_ERR_EN;
-	*(vip)CIA_IOC_CIA_CTRL = temp;
-
-	/* Clear the CFG register, which gets used for PCI config space
-	   accesses.  That is the way we want to use it, and we do not
-	   want to depend on what ARC or SRM might have left behind.  */
-	*(vip)CIA_IOC_CFG = 0;
- 
-	/* Zero the HAEs.  */
-	*(vip)CIA_IOC_HAE_MEM = 0;
-	*(vip)CIA_IOC_HAE_IO = 0;
-
-	/* For PYXIS, we always use BWX bus and i/o accesses.  To that end,
-	   make sure they're enabled on the controller.  At the same time,
-	   enable the monster window.  */
-	if (is_pyxis) {
-		temp = *(vip)CIA_IOC_CIA_CNFG;
-		temp |= CIA_CNFG_IOA_BWEN | CIA_CNFG_PCI_MWEN;
-		*(vip)CIA_IOC_CIA_CNFG = temp;
-	}
-
-	/* Synchronize with all previous changes.  */
-	mb();
-	*(vip)CIA_IOC_CIA_REV;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	if (! is_pyxis) {
-		struct resource *hae_mem = alloc_resource();
-		hose->mem_space = hae_mem;
-
-		hae_mem->start = 0;
-		hae_mem->end = CIA_MEM_R1_MASK;
-		hae_mem->name = pci_hae0_name;
-		hae_mem->flags = IORESOURCE_MEM;
-
-		if (request_resource(&iomem_resource, hae_mem) < 0)
-			printk(KERN_ERR "Failed to request HAE_MEM\n");
-
-		hose->sparse_mem_base = CIA_SPARSE_MEM - IDENT_ADDR;
-		hose->dense_mem_base = CIA_DENSE_MEM - IDENT_ADDR;
-		hose->sparse_io_base = CIA_IO - IDENT_ADDR;
-		hose->dense_io_base = 0;
-	} else {
-		hose->sparse_mem_base = 0;
-		hose->dense_mem_base = CIA_BW_MEM - IDENT_ADDR;
-		hose->sparse_io_base = 0;
-		hose->dense_io_base = CIA_BW_IO - IDENT_ADDR;
-	}
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 0 is S/G 8MB at 8MB (for isa)
-	 * Window 1 is S/G 1MB at 768MB (for tbia) (unused for CIA rev 1)
-	 * Window 2 is direct access 2GB at 2GB
-	 * Window 3 is DAC access 4GB at 8GB (or S/G for tbia if CIA rev 1)
-	 *
-	 * ??? NetBSD hints that page tables must be aligned to 32K,
-	 * possibly due to a hardware bug.  This is over-aligned
-	 * from the 8K alignment one would expect for an 8MB window. 
-	 * No description of what revisions affected.
-	 */
-
-	hose->sg_pci = NULL;
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 32768);
-
-	__direct_map_base = 0x80000000;
-	__direct_map_size = 0x80000000;
-
-	*(vip)CIA_IOC_PCI_W0_BASE = hose->sg_isa->dma_base | 3;
-	*(vip)CIA_IOC_PCI_W0_MASK = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vip)CIA_IOC_PCI_T0_BASE = virt_to_phys(hose->sg_isa->ptes) >> 2;
-
-	*(vip)CIA_IOC_PCI_W2_BASE = __direct_map_base | 1;
-	*(vip)CIA_IOC_PCI_W2_MASK = (__direct_map_size - 1) & 0xfff00000;
-	*(vip)CIA_IOC_PCI_T2_BASE = 0 >> 2;
-
-	/* On PYXIS we have the monster window, selected by bit 40, so
-	   there is no need for window3 to be enabled.
-
-	   On CIA, we don't have true arbitrary addressing -- bits <39:32>
-	   are compared against W_DAC.  We can, however, directly map 4GB,
-	   which is better than before.  However, due to assumptions made
-	   elsewhere, we should not claim that we support DAC unless that
-	   4GB covers all of physical memory.
-
-	   On CIA rev 1, apparently W1 and W2 can't be used for SG. 
-	   At least, there are reports that it doesn't work for Alcor. 
-	   In that case, we have no choice but to use W3 for the TBIA 
-	   workaround, which means we can't use DAC at all. */ 
-
-	tbia_window = 1;
-	if (is_pyxis) {
-		*(vip)CIA_IOC_PCI_W3_BASE = 0;
-	} else if (cia_rev == 1) {
-		*(vip)CIA_IOC_PCI_W1_BASE = 0;
-		tbia_window = 3;
-	} else if (max_low_pfn > (0x100000000UL >> PAGE_SHIFT)) {
-		*(vip)CIA_IOC_PCI_W3_BASE = 0;
-	} else {
-		*(vip)CIA_IOC_PCI_W3_BASE = 0x00000000 | 1 | 8;
-		*(vip)CIA_IOC_PCI_W3_MASK = 0xfff00000;
-		*(vip)CIA_IOC_PCI_T3_BASE = 0 >> 2;
-
-		alpha_mv.pci_dac_offset = 0x200000000UL;
-		*(vip)CIA_IOC_PCI_W_DAC = alpha_mv.pci_dac_offset >> 32;
-	}
-
-	/* Prepare workaround for apparently broken tbia. */
-	cia_prepare_tbia_workaround(tbia_window);
-}
-
-void __init
-cia_init_arch(void)
-{
-	do_init_arch(0);
-}
-
-void __init
-pyxis_init_arch(void)
-{
-	/* On pyxis machines we can precisely calculate the
-	   CPU clock frequency using pyxis real time counter.
-	   It's especially useful for SX164 with broken RTC.
-
-	   Both CPU and chipset are driven by the single 16.666M
-	   or 16.667M crystal oscillator. PYXIS_RT_COUNT clock is
-	   66.66 MHz. -ink */
-
-	unsigned int cc0, cc1;
-	unsigned long pyxis_cc;
-
-	__asm__ __volatile__ ("rpcc %0" : "=r"(cc0));
-	pyxis_cc = *(vulp)PYXIS_RT_COUNT;
-	do { } while(*(vulp)PYXIS_RT_COUNT - pyxis_cc < 4096);
-	__asm__ __volatile__ ("rpcc %0" : "=r"(cc1));
-	cc1 -= cc0;
-	hwrpb->cycle_freq = ((cc1 >> 11) * 100000000UL) / 3;
-	hwrpb_update_checksum(hwrpb);
-
-	do_init_arch(1);
-}
-
-void
-cia_kill_arch(int mode)
-{
-	if (alpha_using_srm)
-		cia_restore_srm_settings();
-}
-
-void __init
-cia_init_pci(void)
-{
-	/* Must delay this from init_arch, as we need machine checks.  */
-	verify_tb_operation();
-	common_init_pci();
-}
-
-static inline void
-cia_pci_clr_err(void)
-{
-	int jd;
-
-	jd = *(vip)CIA_IOC_CIA_ERR;
-	*(vip)CIA_IOC_CIA_ERR = jd;
-	mb();
-	*(vip)CIA_IOC_CIA_ERR;		/* re-read to force write.  */
-}
-
-#ifdef CONFIG_VERBOSE_MCHECK
-static void
-cia_decode_pci_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
-{
-	static const char * const pci_cmd_desc[16] = {
-		"Interrupt Acknowledge", "Special Cycle", "I/O Read",
-		"I/O Write", "Reserved 0x4", "Reserved 0x5", "Memory Read",
-		"Memory Write", "Reserved 0x8", "Reserved 0x9",
-		"Configuration Read", "Configuration Write",
-		"Memory Read Multiple", "Dual Address Cycle",
-		"Memory Read Line", "Memory Write and Invalidate"
-	};
-
-	if (cia->cia_err & (CIA_ERR_COR_ERR
-			    | CIA_ERR_UN_COR_ERR
-			    | CIA_ERR_MEM_NEM
-			    | CIA_ERR_PA_PTE_INV)) {
-		static const char * const window_desc[6] = {
-			"No window active", "Window 0 hit", "Window 1 hit",
-			"Window 2 hit", "Window 3 hit", "Monster window hit"
-		};
-
-		const char *window;
-		const char *cmd;
-		unsigned long addr, tmp;
-		int lock, dac;
-	
-		cmd = pci_cmd_desc[cia->pci_err0 & 0x7];
-		lock = (cia->pci_err0 >> 4) & 1;
-		dac = (cia->pci_err0 >> 5) & 1;
-
-		tmp = (cia->pci_err0 >> 8) & 0x1F;
-		tmp = ffs(tmp);
-		window = window_desc[tmp];
-
-		addr = cia->pci_err1;
-		if (dac) {
-			tmp = *(vip)CIA_IOC_PCI_W_DAC & 0xFFUL;
-			addr |= tmp << 32;
-		}
-
-		printk(KERN_CRIT "CIA machine check: %s\n", msg);
-		printk(KERN_CRIT "  DMA command: %s\n", cmd);
-		printk(KERN_CRIT "  PCI address: %#010lx\n", addr);
-		printk(KERN_CRIT "  %s, Lock: %d, DAC: %d\n",
-		       window, lock, dac);
-	} else if (cia->cia_err & (CIA_ERR_PERR
-				   | CIA_ERR_PCI_ADDR_PE
-				   | CIA_ERR_RCVD_MAS_ABT
-				   | CIA_ERR_RCVD_TAR_ABT
-				   | CIA_ERR_IOA_TIMEOUT)) {
-		static const char * const master_st_desc[16] = {
-			"Idle", "Drive bus", "Address step cycle",
-			"Address cycle", "Data cycle", "Last read data cycle",
-			"Last write data cycle", "Read stop cycle",
-			"Write stop cycle", "Read turnaround cycle",
-			"Write turnaround cycle", "Reserved 0xB",
-			"Reserved 0xC", "Reserved 0xD", "Reserved 0xE",
-			"Unknown state"
-		};
-		static const char * const target_st_desc[16] = {
-			"Idle", "Busy", "Read data cycle", "Write data cycle",
-			"Read stop cycle", "Write stop cycle",
-			"Read turnaround cycle", "Write turnaround cycle",
-			"Read wait cycle", "Write wait cycle",
-			"Reserved 0xA", "Reserved 0xB", "Reserved 0xC",
-			"Reserved 0xD", "Reserved 0xE", "Unknown state"
-		};
-
-		const char *cmd;
-		const char *master, *target;
-		unsigned long addr, tmp;
-		int dac;
-
-		master = master_st_desc[(cia->pci_err0 >> 16) & 0xF];
-		target = target_st_desc[(cia->pci_err0 >> 20) & 0xF];
-		cmd = pci_cmd_desc[(cia->pci_err0 >> 24) & 0xF];
-		dac = (cia->pci_err0 >> 28) & 1;
-
-		addr = cia->pci_err2;
-		if (dac) {
-			tmp = *(volatile int *)CIA_IOC_PCI_W_DAC & 0xFFUL;
-			addr |= tmp << 32;
-		}
-
-		printk(KERN_CRIT "CIA machine check: %s\n", msg);
-		printk(KERN_CRIT "  PCI command: %s\n", cmd);
-		printk(KERN_CRIT "  Master state: %s, Target state: %s\n",
-		       master, target);
-		printk(KERN_CRIT "  PCI address: %#010lx, DAC: %d\n",
-		       addr, dac);
-	} else {
-		printk(KERN_CRIT "CIA machine check: %s\n", msg);
-		printk(KERN_CRIT "  Unknown PCI error\n");
-		printk(KERN_CRIT "  PCI_ERR0 = %#08lx", cia->pci_err0);
-		printk(KERN_CRIT "  PCI_ERR1 = %#08lx", cia->pci_err1);
-		printk(KERN_CRIT "  PCI_ERR2 = %#08lx", cia->pci_err2);
-	}
-}
-
-static void
-cia_decode_mem_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
-{
-	unsigned long mem_port_addr;
-	unsigned long mem_port_mask;
-	const char *mem_port_cmd;
-	const char *seq_state;
-	const char *set_select;
-	unsigned long tmp;
-
-	/* If this is a DMA command, also decode the PCI bits.  */
-	if ((cia->mem_err1 >> 20) & 1)
-		cia_decode_pci_error(cia, msg);
-	else
-		printk(KERN_CRIT "CIA machine check: %s\n", msg);
-
-	mem_port_addr = cia->mem_err0 & 0xfffffff0;
-	mem_port_addr |= (cia->mem_err1 & 0x83UL) << 32;
-
-	mem_port_mask = (cia->mem_err1 >> 12) & 0xF;
-
-	tmp = (cia->mem_err1 >> 8) & 0xF;
-	tmp |= ((cia->mem_err1 >> 20) & 1) << 4;
-	if ((tmp & 0x1E) == 0x06)
-		mem_port_cmd = "WRITE BLOCK or WRITE BLOCK LOCK";
-	else if ((tmp & 0x1C) == 0x08)
-		mem_port_cmd = "READ MISS or READ MISS MODIFY";
-	else if (tmp == 0x1C)
-		mem_port_cmd = "BC VICTIM";
-	else if ((tmp & 0x1E) == 0x0E)
-		mem_port_cmd = "READ MISS MODIFY";
-	else if ((tmp & 0x1C) == 0x18)
-		mem_port_cmd = "DMA READ or DMA READ MODIFY";
-	else if ((tmp & 0x1E) == 0x12)
-		mem_port_cmd = "DMA WRITE";
-	else
-		mem_port_cmd = "Unknown";
-
-	tmp = (cia->mem_err1 >> 16) & 0xF;
-	switch (tmp) {
-	case 0x0:
-		seq_state = "Idle";
-		break;
-	case 0x1:
-		seq_state = "DMA READ or DMA WRITE";
-		break;
-	case 0x2: case 0x3:
-		seq_state = "READ MISS (or READ MISS MODIFY) with victim";
-		break;
-	case 0x4: case 0x5: case 0x6:
-		seq_state = "READ MISS (or READ MISS MODIFY) with no victim";
-		break;
-	case 0x8: case 0x9: case 0xB:
-		seq_state = "Refresh";
-		break;
-	case 0xC:
-		seq_state = "Idle, waiting for DMA pending read";
-		break;
-	case 0xE: case 0xF:
-		seq_state = "Idle, ras precharge";
-		break;
-	default:
-		seq_state = "Unknown";
-		break;
-	}
-
-	tmp = (cia->mem_err1 >> 24) & 0x1F;
-	switch (tmp) {
-	case 0x00: set_select = "Set 0 selected"; break;
-	case 0x01: set_select = "Set 1 selected"; break;
-	case 0x02: set_select = "Set 2 selected"; break;
-	case 0x03: set_select = "Set 3 selected"; break;
-	case 0x04: set_select = "Set 4 selected"; break;
-	case 0x05: set_select = "Set 5 selected"; break;
-	case 0x06: set_select = "Set 6 selected"; break;
-	case 0x07: set_select = "Set 7 selected"; break;
-	case 0x08: set_select = "Set 8 selected"; break;
-	case 0x09: set_select = "Set 9 selected"; break;
-	case 0x0A: set_select = "Set A selected"; break;
-	case 0x0B: set_select = "Set B selected"; break;
-	case 0x0C: set_select = "Set C selected"; break;
-	case 0x0D: set_select = "Set D selected"; break;
-	case 0x0E: set_select = "Set E selected"; break;
-	case 0x0F: set_select = "Set F selected"; break;
-	case 0x10: set_select = "No set selected"; break;
-	case 0x1F: set_select = "Refresh cycle"; break;
-	default:   set_select = "Unknown"; break;
-	}
-
-	printk(KERN_CRIT "  Memory port command: %s\n", mem_port_cmd);
-	printk(KERN_CRIT "  Memory port address: %#010lx, mask: %#lx\n",
-	       mem_port_addr, mem_port_mask);
-	printk(KERN_CRIT "  Memory sequencer state: %s\n", seq_state);
-	printk(KERN_CRIT "  Memory set: %s\n", set_select);
-}
-
-static void
-cia_decode_ecc_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
-{
-	long syn;
-	long i;
-	const char *fmt;
-
-	cia_decode_mem_error(cia, msg);
-
-	syn = cia->cia_syn & 0xff;
-	if (syn == (syn & -syn)) {
-		fmt = KERN_CRIT "  ECC syndrome %#x -- check bit %d\n";
-		i = ffs(syn) - 1;
-	} else {
-		static unsigned char const data_bit[64] = {
-			0xCE, 0xCB, 0xD3, 0xD5,
-			0xD6, 0xD9, 0xDA, 0xDC,
-			0x23, 0x25, 0x26, 0x29,
-			0x2A, 0x2C, 0x31, 0x34,
-			0x0E, 0x0B, 0x13, 0x15,
-			0x16, 0x19, 0x1A, 0x1C,
-			0xE3, 0xE5, 0xE6, 0xE9,
-			0xEA, 0xEC, 0xF1, 0xF4,
-			0x4F, 0x4A, 0x52, 0x54,
-			0x57, 0x58, 0x5B, 0x5D,
-			0xA2, 0xA4, 0xA7, 0xA8,
-			0xAB, 0xAD, 0xB0, 0xB5,
-			0x8F, 0x8A, 0x92, 0x94,
-			0x97, 0x98, 0x9B, 0x9D,
-			0x62, 0x64, 0x67, 0x68,
-			0x6B, 0x6D, 0x70, 0x75
-		};
-
-		for (i = 0; i < 64; ++i)
-			if (data_bit[i] == syn)
-				break;
-
-		if (i < 64)
-			fmt = KERN_CRIT "  ECC syndrome %#x -- data bit %d\n";
-		else
-			fmt = KERN_CRIT "  ECC syndrome %#x -- unknown bit\n";
-	}
-
-	printk (fmt, syn, i);
-}
-
-static void
-cia_decode_parity_error(struct el_CIA_sysdata_mcheck *cia)
-{
-	static const char * const cmd_desc[16] = {
-		"NOP", "LOCK", "FETCH", "FETCH_M", "MEMORY BARRIER",
-		"SET DIRTY", "WRITE BLOCK", "WRITE BLOCK LOCK",
-		"READ MISS0", "READ MISS1", "READ MISS MOD0",
-		"READ MISS MOD1", "BCACHE VICTIM", "Spare",
-		"READ MISS MOD STC0", "READ MISS MOD STC1"
-	};
-
-	unsigned long addr;
-	unsigned long mask;
-	const char *cmd;
-	int par;
-
-	addr = cia->cpu_err0 & 0xfffffff0;
-	addr |= (cia->cpu_err1 & 0x83UL) << 32;
-	cmd = cmd_desc[(cia->cpu_err1 >> 8) & 0xF];
-	mask = (cia->cpu_err1 >> 12) & 0xF;
-	par = (cia->cpu_err1 >> 21) & 1;
-
-	printk(KERN_CRIT "CIA machine check: System bus parity error\n");
-	printk(KERN_CRIT "  Command: %s, Parity bit: %d\n", cmd, par);
-	printk(KERN_CRIT "  Address: %#010lx, Mask: %#lx\n", addr, mask);
-}
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-
-static int
-cia_decode_mchk(unsigned long la_ptr)
-{
-	struct el_common *com;
-	struct el_CIA_sysdata_mcheck *cia;
-
-	com = (void *)la_ptr;
-	cia = (void *)(la_ptr + com->sys_offset);
-
-	if ((cia->cia_err & CIA_ERR_VALID) == 0)
-		return 0;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (!alpha_verbose_mcheck)
-		return 1;
-
-	switch (ffs(cia->cia_err & 0xfff) - 1) {
-	case 0: /* CIA_ERR_COR_ERR */
-		cia_decode_ecc_error(cia, "Corrected ECC error");
-		break;
-	case 1: /* CIA_ERR_UN_COR_ERR */
-		cia_decode_ecc_error(cia, "Uncorrected ECC error");
-		break;
-	case 2: /* CIA_ERR_CPU_PE */
-		cia_decode_parity_error(cia);
-		break;
-	case 3: /* CIA_ERR_MEM_NEM */
-		cia_decode_mem_error(cia, "Access to nonexistent memory");
-		break;
-	case 4: /* CIA_ERR_PCI_SERR */
-		cia_decode_pci_error(cia, "PCI bus system error");
-		break;
-	case 5: /* CIA_ERR_PERR */
-		cia_decode_pci_error(cia, "PCI data parity error");
-		break;
-	case 6: /* CIA_ERR_PCI_ADDR_PE */
-		cia_decode_pci_error(cia, "PCI address parity error");
-		break;
-	case 7: /* CIA_ERR_RCVD_MAS_ABT */
-		cia_decode_pci_error(cia, "PCI master abort");
-		break;
-	case 8: /* CIA_ERR_RCVD_TAR_ABT */
-		cia_decode_pci_error(cia, "PCI target abort");
-		break;
-	case 9: /* CIA_ERR_PA_PTE_INV */
-		cia_decode_pci_error(cia, "PCI invalid PTE");
-		break;
-	case 10: /* CIA_ERR_FROM_WRT_ERR */
-		cia_decode_mem_error(cia, "Write to flash ROM attempted");
-		break;
-	case 11: /* CIA_ERR_IOA_TIMEOUT */
-		cia_decode_pci_error(cia, "I/O timeout");
-		break;
-	}
-
-	if (cia->cia_err & CIA_ERR_LOST_CORR_ERR)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "Correctable ECC error\n");
-	if (cia->cia_err & CIA_ERR_LOST_UN_CORR_ERR)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "Uncorrectable ECC error\n");
-	if (cia->cia_err & CIA_ERR_LOST_CPU_PE)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "System bus parity error\n");
-	if (cia->cia_err & CIA_ERR_LOST_MEM_NEM)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "Access to nonexistent memory\n");
-	if (cia->cia_err & CIA_ERR_LOST_PERR)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "PCI data parity error\n");
-	if (cia->cia_err & CIA_ERR_LOST_PCI_ADDR_PE)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "PCI address parity error\n");
-	if (cia->cia_err & CIA_ERR_LOST_RCVD_MAS_ABT)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "PCI master abort\n");
-	if (cia->cia_err & CIA_ERR_LOST_RCVD_TAR_ABT)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "PCI target abort\n");
-	if (cia->cia_err & CIA_ERR_LOST_PA_PTE_INV)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "PCI invalid PTE\n");
-	if (cia->cia_err & CIA_ERR_LOST_FROM_WRT_ERR)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "Write to flash ROM attempted\n");
-	if (cia->cia_err & CIA_ERR_LOST_IOA_TIMEOUT)
-		printk(KERN_CRIT "CIA lost machine check: "
-		       "I/O timeout\n");
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return 1;
-}
-
-void
-cia_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	int expected;
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb();  /* magic */
-	draina();
-	cia_pci_clr_err();
-	wrmces(rdmces());	/* reset machine check pending flag.  */
-	mb();
-
-	expected = mcheck_expected(0);
-	if (!expected && vector == 0x660)
-		expected = cia_decode_mchk(la_ptr);
-	process_mcheck_info(vector, la_ptr, "CIA", expected);
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_irongate.c b/ANDROID_3.4.5/arch/alpha/kernel/core_irongate.c
deleted file mode 100644
index 00096df0..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_irongate.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_irongate.c
- *
- * Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com).
- *
- *	Copyright (C) 1999 Alpha Processor, Inc.,
- *		(David Daniel, Stig Telfer, Soohoon Lee)
- *
- * Code common to all IRONGATE core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_irongate.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/bootmem.h>
-
-#include <asm/ptrace.h>
-#include <asm/pci.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBG_CFG(args)	printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-igcsr32 *IronECC;
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address accordingly.  It is therefore not safe
- * to have concurrent invocations to configuration space access
- * routines, but there really shouldn't be any need for this.
- *
- *	addr[31:24]		reserved
- *	addr[23:16]		bus number (8 bits = 128 possible buses)
- *	addr[15:11]		Device number (5 bits)
- *	addr[10: 8]		function number
- *	addr[ 7: 2]		register number
- *
- * For IRONGATE:
- *    if (bus = addr[23:16]) == 0
- *    then
- *	  type 0 config cycle:
- *	      addr_on_pci[31:11] = id selection for device = addr[15:11]
- *	      addr_on_pci[10: 2] = addr[10: 2] ???
- *	      addr_on_pci[ 1: 0] = 00
- *    else
- *	  type 1 config cycle (pass on with no decoding):
- *	      addr_on_pci[31:24] = 0
- *	      addr_on_pci[23: 2] = addr[23: 2]
- *	      addr_on_pci[ 1: 0] = 01
- *    fi
- *
- * Notes:
- *	The function number selects which function of a multi-function device
- *	(e.g., SCSI and Ethernet).
- *
- *	The register selects a DWORD (32 bit) register offset.	Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
-		 "pci_addr=0x%p, type1=0x%p)\n",
-		 bus, device_fn, where, pci_addr, type1));
-
-	*type1 = (bus != 0);
-
-	addr = (bus << 16) | (device_fn << 8) | where;
-	addr |= IRONGATE_CONF;
-
-	*pci_addr = addr;
-	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static int
-irongate_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 *value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		*value = __kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		*value = __kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*value = *(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-irongate_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		__kernel_stb(value, *(vucp)addr);
-		mb();
-		__kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		__kernel_stw(value, *(vusp)addr);
-		mb();
-		__kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*(vuip)addr = value;
-		mb();
-		*(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops irongate_pci_ops =
-{
-	.read =		irongate_read_config,
-	.write =	irongate_write_config,
-};
-
-int
-irongate_pci_clr_err(void)
-{
-	unsigned int nmi_ctl=0;
-	unsigned int IRONGATE_jd;
-
-again:
-	IRONGATE_jd = IRONGATE0->stat_cmd;
-	printk("Iron stat_cmd %x\n", IRONGATE_jd);
-	IRONGATE0->stat_cmd = IRONGATE_jd; /* write again clears error bits */
-	mb();
-	IRONGATE_jd = IRONGATE0->stat_cmd;  /* re-read to force write */
-
-	IRONGATE_jd = *IronECC;
-	printk("Iron ECC %x\n", IRONGATE_jd);
-	*IronECC = IRONGATE_jd; /* write again clears error bits */
-	mb();
-	IRONGATE_jd = *IronECC;  /* re-read to force write */
-
-	/* Clear ALI NMI */
-        nmi_ctl = inb(0x61);
-        nmi_ctl |= 0x0c;
-        outb(nmi_ctl, 0x61);
-        nmi_ctl &= ~0x0c;
-        outb(nmi_ctl, 0x61);
-
-	IRONGATE_jd = *IronECC;
-	if (IRONGATE_jd & 0x300) goto again;
-
-	return 0;
-}
-
-#define IRONGATE_3GB 0xc0000000UL
-
-/* On Albacore (aka UP1500) with 4Gb of RAM we have to reserve some
-   memory for PCI. At this point we just reserve memory above 3Gb. Most
-   of this memory will be freed after PCI setup is done. */
-static void __init
-albacore_init_arch(void)
-{
-	unsigned long memtop = max_low_pfn << PAGE_SHIFT;
-	unsigned long pci_mem = (memtop + 0x1000000UL) & ~0xffffffUL;
-	struct percpu_struct *cpu;
-	int pal_rev, pal_var;
-
-	cpu = (struct percpu_struct*)((char*)hwrpb + hwrpb->processor_offset);
-	pal_rev = cpu->pal_revision & 0xffff;
-	pal_var = (cpu->pal_revision >> 16) & 0xff;
-
-	/* Consoles earlier than A5.6-18 (OSF PALcode v1.62-2) set up
-	   the CPU incorrectly (leave speculative stores enabled),
-	   which causes memory corruption under certain conditions.
-	   Issue a warning for such consoles. */
-	if (alpha_using_srm &&
-	    (pal_rev < 0x13e ||	(pal_rev == 0x13e && pal_var < 2)))
-		printk(KERN_WARNING "WARNING! Upgrade to SRM A5.6-19 "
-				    "or later\n");
-
-	if (pci_mem > IRONGATE_3GB)
-		pci_mem = IRONGATE_3GB;
-	IRONGATE0->pci_mem = pci_mem;
-	alpha_mv.min_mem_address = pci_mem;
-	if (memtop > pci_mem) {
-#ifdef CONFIG_BLK_DEV_INITRD
-		extern unsigned long initrd_start, initrd_end;
-		extern void *move_initrd(unsigned long);
-
-		/* Move the initrd out of the way. */
-		if (initrd_end && __pa(initrd_end) > pci_mem) {
-			unsigned long size;
-
-			size = initrd_end - initrd_start;
-			free_bootmem_node(NODE_DATA(0), __pa(initrd_start),
-					  PAGE_ALIGN(size));
-			if (!move_initrd(pci_mem))
-				printk("irongate_init_arch: initrd too big "
-				       "(%ldK)\ndisabling initrd\n",
-				       size / 1024);
-		}
-#endif
-		reserve_bootmem_node(NODE_DATA(0), pci_mem, memtop -
-				pci_mem, BOOTMEM_DEFAULT);
-		printk("irongate_init_arch: temporarily reserving "
-			"region %08lx-%08lx for PCI\n", pci_mem, memtop - 1);
-	}
-}
-
-static void __init
-irongate_setup_agp(void)
-{
-	/* Disable the GART window. AGPGART doesn't work due to yet
-	   unresolved memory coherency issues... */
-	IRONGATE0->agpva = IRONGATE0->agpva & ~0xf;
-	alpha_agpgart_size = 0;
-}
-
-void __init
-irongate_init_arch(void)
-{
-	struct pci_controller *hose;
-	int amd761 = (IRONGATE0->dev_vendor >> 16) > 0x7006;	/* Albacore? */
-
-	IronECC = amd761 ? &IRONGATE0->bacsr54_eccms761 : &IRONGATE0->dramms;
-
-	irongate_pci_clr_err();
-
-	if (amd761)
-		albacore_init_arch();
-
-	irongate_setup_agp();
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	/* This is for userland consumption.  For some reason, the 40-bit
-	   PIO bias that we use in the kernel through KSEG didn't work for
-	   the page table based user mappings.  So make sure we get the
-	   43-bit PIO bias.  */
-	hose->sparse_mem_base = 0;
-	hose->sparse_io_base = 0;
-	hose->dense_mem_base
-	  = (IRONGATE_MEM & 0xffffffffffUL) | 0x80000000000UL;
-	hose->dense_io_base
-	  = (IRONGATE_IO & 0xffffffffffUL) | 0x80000000000UL;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-	__direct_map_base = 0;
-	__direct_map_size = 0xffffffff;
-}
-
-/*
- * IO map and AGP support
- */
-#include <linux/vmalloc.h>
-#include <linux/agp_backend.h>
-#include <linux/agpgart.h>
-#include <linux/export.h>
-#include <asm/pgalloc.h>
-
-#define GET_PAGE_DIR_OFF(addr) (addr >> 22)
-#define GET_PAGE_DIR_IDX(addr) (GET_PAGE_DIR_OFF(addr))
-
-#define GET_GATT_OFF(addr) ((addr & 0x003ff000) >> 12) 
-#define GET_GATT(addr) (gatt_pages[GET_PAGE_DIR_IDX(addr)])
-
-void __iomem *
-irongate_ioremap(unsigned long addr, unsigned long size)
-{
-	struct vm_struct *area;
-	unsigned long vaddr;
-	unsigned long baddr, last;
-	u32 *mmio_regs, *gatt_pages, *cur_gatt, pte;
-	unsigned long gart_bus_addr;
-
-	if (!alpha_agpgart_size)
-		return (void __iomem *)(addr + IRONGATE_MEM);
-
-	gart_bus_addr = (unsigned long)IRONGATE0->bar0 &
-			PCI_BASE_ADDRESS_MEM_MASK; 
-
-	/* 
-	 * Check for within the AGP aperture...
-	 */
-	do {
-		/*
-		 * Check the AGP area
-		 */
-		if (addr >= gart_bus_addr && addr + size - 1 < 
-		    gart_bus_addr + alpha_agpgart_size)
-			break;
-
-		/*
-		 * Not found - assume legacy ioremap
-		 */
-		return (void __iomem *)(addr + IRONGATE_MEM);
-	} while(0);
-
-	mmio_regs = (u32 *)(((unsigned long)IRONGATE0->bar1 &
-			PCI_BASE_ADDRESS_MEM_MASK) + IRONGATE_MEM);
-
-	gatt_pages = (u32 *)(phys_to_virt(mmio_regs[1])); /* FIXME */
-
-	/*
-	 * Adjust the limits (mappings must be page aligned)
-	 */
-	if (addr & ~PAGE_MASK) {
-		printk("AGP ioremap failed... addr not page aligned (0x%lx)\n",
-		       addr);
-		return (void __iomem *)(addr + IRONGATE_MEM);
-	}
-	last = addr + size - 1;
-	size = PAGE_ALIGN(last) - addr;
-
-#if 0
-	printk("irongate_ioremap(0x%lx, 0x%lx)\n", addr, size);
-	printk("irongate_ioremap:  gart_bus_addr  0x%lx\n", gart_bus_addr);
-	printk("irongate_ioremap:  gart_aper_size 0x%lx\n", gart_aper_size);
-	printk("irongate_ioremap:  mmio_regs      %p\n", mmio_regs);
-	printk("irongate_ioremap:  gatt_pages     %p\n", gatt_pages);
-	
-	for(baddr = addr; baddr <= last; baddr += PAGE_SIZE)
-	{
-		cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1);
-		pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1;
-		printk("irongate_ioremap:  cur_gatt %p pte 0x%x\n",
-		       cur_gatt, pte);
-	}
-#endif
-
-	/*
-	 * Map it
-	 */
-	area = get_vm_area(size, VM_IOREMAP);
-	if (!area) return NULL;
-
-	for(baddr = addr, vaddr = (unsigned long)area->addr; 
-	    baddr <= last; 
-	    baddr += PAGE_SIZE, vaddr += PAGE_SIZE)
-	{
-		cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1);
-		pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1;
-
-		if (__alpha_remap_area_pages(vaddr,
-					     pte, PAGE_SIZE, 0)) {
-			printk("AGP ioremap: FAILED to map...\n");
-			vfree(area->addr);
-			return NULL;
-		}
-	}
-
-	flush_tlb_all();
-
-	vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
-#if 0
-	printk("irongate_ioremap(0x%lx, 0x%lx) returning 0x%lx\n",
-	       addr, size, vaddr);
-#endif
-	return (void __iomem *)vaddr;
-}
-EXPORT_SYMBOL(irongate_ioremap);
-
-void
-irongate_iounmap(volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (((long)addr >> 41) == -2)
-		return;	/* kseg map, nothing to do */
-	if (addr)
-		return vfree((void *)(PAGE_MASK & addr)); 
-}
-EXPORT_SYMBOL(irongate_iounmap);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_lca.c b/ANDROID_3.4.5/arch/alpha/kernel/core_lca.c
deleted file mode 100644
index cb2801cf..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_lca.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons.  Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR		0x0080
-#define MCHK_K_TCPERR		0x0082
-#define MCHK_K_HERR		0x0084
-#define MCHK_K_ECC_C		0x0086
-#define MCHK_K_ECC_NC		0x0088
-#define MCHK_K_UNKNOWN		0x008A
-#define MCHK_K_CACKSOFT		0x008C
-#define MCHK_K_BUGCHECK		0x008E
-#define MCHK_K_OS_BUGCHECK	0x0090
-#define MCHK_K_DCPERR		0x0092
-#define MCHK_K_ICPERR		0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR		0x204	/* all platforms so far */
-#define MCHK_K_SIO_IOCHK	0x206	/* all platforms so far */
-#define MCHK_K_DCSR		0x208	/* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-		int func = device_fn & 0x7;
-
-		/* Type 0 configuration cycle.  */
-
-		if (device > 12) {
-			return -1;
-		}
-
-		*(vulp)LCA_IOC_CONF = 0;
-		addr = (1 << (11 + device)) | (func << 8) | where;
-	} else {
-		/* Type 1 configuration cycle.  */
-		*(vulp)LCA_IOC_CONF = 1;
-		addr = (bus << 16) | (device_fn << 8) | where;
-	}
-	*pci_addr = addr;
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
-	unsigned long flags, code, stat0;
-	unsigned int value;
-
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	value = *(vuip)addr;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_read: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check.  */
-		wrmces(0x7);
-
-		value = 0xffffffff;
-	}
-	local_irq_restore(flags);
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
-	unsigned long flags, code, stat0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_write: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check. */
-		wrmces(0x7);
-	}
-	local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = (where & 3) * 8;
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	*value = conf_read(addr) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		 u32 value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	conf_write(addr, value << ((where & 3) * 8));
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops = 
-{
-	.read =		lca_read_config,
-	.write =	lca_write_config,
-};
-
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vulp)LCA_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-lca_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = LCA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Mimic the SRM settings for the direct-map window.
-	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
-	 *   Window 1 is direct access 1GB at 1GB.
-	 *
-	 * Note that we do not try to save any of the DMA window CSRs
-	 * before setting them, since we cannot read those CSRs on LCA.
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
-	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
-	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
-	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE1 = 0;
-
-	*(vulp)LCA_IOC_TB_ENA = 0x80;
-
-	lca_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Disable PCI parity for now.  The NCR53c810 chip has
-	 * troubles meeting the PCI spec which results in
-	 * data parity errors.
-	 */
-	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
-	/*
-	 * Finally, set up for restoring the correct HAE if using SRM.
-	 * Again, since we cannot read many of the CSRs on the LCA,
-	 * one of which happens to be the HAE, we save the value that
-	 * the SRM will expect...
-	 */
-	if (alpha_using_srm)
-		srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling.  I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV		(1UL<< 0)	/* error address valid */
-#define ESR_CEE		(1UL<< 1)	/* correctable error */
-#define ESR_UEE		(1UL<< 2)	/* uncorrectable error */
-#define ESR_WRE		(1UL<< 3)	/* write-error */
-#define ESR_SOR		(1UL<< 4)	/* error source */
-#define ESR_CTE		(1UL<< 7)	/* cache-tag error */
-#define ESR_MSE		(1UL<< 9)	/* multiple soft errors */
-#define ESR_MHE		(1UL<<10)	/* multiple hard errors */
-#define ESR_NXM		(1UL<<12)	/* non-existent memory */
-
-#define IOC_ERR		(  1<<4)	/* ioc logs an error */
-#define IOC_CMD_SHIFT	0
-#define IOC_CMD		(0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT	8
-#define IOC_CODE	(0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST	(  1<<5)
-#define IOC_P_NBR	((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
-	printk("    %s %s error to %s occurred at address %x\n",
-	       ((esr & ESR_CEE) ? "Correctable" :
-		(esr & ESR_UEE) ? "Uncorrectable" : "A"),
-	       (esr & ESR_WRE) ? "write" : "read",
-	       (esr & ESR_SOR) ? "memory" : "b-cache",
-	       (unsigned) (ear & 0x1ffffff8));
-	if (esr & ESR_CTE) {
-		printk("    A b-cache tag parity error was detected.\n");
-	}
-	if (esr & ESR_MSE) {
-		printk("    Several other correctable errors occurred.\n");
-	}
-	if (esr & ESR_MHE) {
-		printk("    Several other uncorrectable errors occurred.\n");
-	}
-	if (esr & ESR_NXM) {
-		printk("    Attempted to access non-existent memory.\n");
-	}
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
-	static const char * const pci_cmd[] = {
-		"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
-		"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
-		"Rsvd4", "Configuration Read", "Configuration Write",
-		"Memory Read Multiple", "Dual Address", "Memory Read Line",
-		"Memory Write and Invalidate"
-	};
-	static const char * const err_name[] = {
-		"exceeded retry limit", "no device", "bad data parity",
-		"target abort", "bad address parity", "page table read error",
-		"invalid page", "data error"
-	};
-	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
-	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
-
-	printk("    %s initiated PCI %s cycle to address %x"
-	       " failed due to %s.\n",
-	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
-	if (code == 5 || code == 6) {
-		printk("    (Error occurred at PCI memory address %x.)\n",
-		       (stat0 & ~IOC_P_NBR));
-	}
-	if (stat0 & IOC_LOST) {
-		printk("    Other PCI errors occurred simultaneously.\n");
-	}
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	const char * reason;
-	union el_lca el;
-
-	el.c = (struct el_common *) la_ptr;
-
-	wrmces(rdmces());	/* reset machine check pending flag */
-
-	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
-	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
-	/*
-	 * The first quadword after the common header always seems to
-	 * be the machine check reason---don't know why this isn't
-	 * part of the common header instead.  In the case of a long
-	 * logout frame, the upper 32 bits is the machine check
-	 * revision level, which we ignore for now.
-	 */
-	switch ((unsigned int) el.c->code) {
-	case MCHK_K_TPERR:	reason = "tag parity error"; break;
-	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
-	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
-	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
-	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
-	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
-	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
-	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
-	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
-	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
-	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
-	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
-	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
-	case MCHK_K_UNKNOWN:
-	default:		reason = "unknown"; break;
-	}
-
-	switch (el.c->size) {
-	case sizeof(struct el_lca_mcheck_short):
-		printk(KERN_CRIT
-		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
-		       reason, el.c->retry ? ", retryable" : "",
-		       el.s->dc_stat);
-		if (el.s->esr & ESR_EAV) {
-			mem_error(el.s->esr, el.s->ear);
-		}
-		if (el.s->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
-		}
-		break;
-
-	case sizeof(struct el_lca_mcheck_long):
-		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
-		       reason, el.c->retry ? ", retryable" : "");
-		printk(KERN_CRIT
-		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
-		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
-		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
-		if (el.l->esr & ESR_EAV) {
-			mem_error(el.l->esr, el.l->ear);
-		}
-		if (el.l->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
-		}
-		break;
-
-	default:
-		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
-	}
-
-	/* Dump the logout area to give all info.  */
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		unsigned long * ptr = (unsigned long *) la_ptr;
-		long i;
-		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
-			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
-			       i*sizeof(long), ptr[i], ptr[i+1]);
-		}
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-/*
- * The following routines are needed to support the SPEED changing
- * necessary to successfully manage the thermal problem on the AlphaBook1.
- */
-
-void
-lca_clock_print(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-
-        printk("Status of clock control:\n");
-        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
-        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
-        printk("\tInterrupt override is %s\n",
-	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
-        printk("\tDMA override is %s\n",
-	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
-
-}
-
-int
-lca_get_clock(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        return(LCA_GET_PRIMARY(pmr_reg));
-
-}
-
-void
-lca_clock_fiddle(int divisor)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
-	/* lca_norm_clock = divisor; */
-        LCA_WRITE_PMR(pmr_reg);
-        mb();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_marvel.c b/ANDROID_3.4.5/arch/alpha/kernel/core_marvel.c
deleted file mode 100644
index 53dd2f1a..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_marvel.c
+++ /dev/null
@@ -1,1139 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_marvel.c
- *
- * Code common to all Marvel based systems.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_marvel.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/mc146818rtc.h>
-#include <linux/rtc.h>
-#include <linux/module.h>
-#include <linux/bootmem.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/gct.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/rtc.h>
-#include <asm/vga.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * Debug helpers
- */
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBG_CFG(args) printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-
-/*
- * Private data
- */
-static struct io7 *io7_head = NULL;
-
-
-/*
- * Helper functions
- */
-static unsigned long __attribute__ ((unused))
-read_ev7_csr(int pe, unsigned long offset)
-{
-	ev7_csr *ev7csr = EV7_CSR_KERN(pe, offset);
-	unsigned long q;
-
-	mb();
-	q = ev7csr->csr;
-	mb();
-
-	return q;
-}
-
-static void __attribute__ ((unused))
-write_ev7_csr(int pe, unsigned long offset, unsigned long q)
-{
-	ev7_csr *ev7csr = EV7_CSR_KERN(pe, offset);
-
-	mb();
-	ev7csr->csr = q;
-	mb();
-}
-
-static char * __init
-mk_resource_name(int pe, int port, char *str)
-{
-	char tmp[80];
-	char *name;
-	
-	sprintf(tmp, "PCI %s PE %d PORT %d", str, pe, port);
-	name = alloc_bootmem(strlen(tmp) + 1);
-	strcpy(name, tmp);
-
-	return name;
-}
-
-inline struct io7 *
-marvel_next_io7(struct io7 *prev)
-{
-	return (prev ? prev->next : io7_head);
-}
-
-struct io7 *
-marvel_find_io7(int pe)
-{
-	struct io7 *io7;
-
-	for (io7 = io7_head; io7 && io7->pe != pe; io7 = io7->next)
-		continue;
-
-	return io7;
-}
-
-static struct io7 * __init
-alloc_io7(unsigned int pe)
-{
-	struct io7 *io7;
-	struct io7 *insp;
-	int h;
-
-	if (marvel_find_io7(pe)) {
-		printk(KERN_WARNING "IO7 at PE %d already allocated!\n", pe);
-		return NULL;
-	}
-
-	io7 = alloc_bootmem(sizeof(*io7));
-	io7->pe = pe;
-	spin_lock_init(&io7->irq_lock);
-
-	for (h = 0; h < 4; h++) {
-		io7->ports[h].io7 = io7;
-		io7->ports[h].port = h;
-		io7->ports[h].enabled = 0; /* default to disabled */
-	}
-
-	/*
-	 * Insert in pe sorted order.
-	 */
-	if (NULL == io7_head)			/* empty list */
-		io7_head = io7;	
-	else if (io7_head->pe > io7->pe) {	/* insert at head */
-		io7->next = io7_head;
-		io7_head = io7;
-	} else {				/* insert at position */
-		for (insp = io7_head; insp; insp = insp->next) {
-			if (insp->pe == io7->pe) {
-				printk(KERN_ERR "Too many IO7s at PE %d\n", 
-				       io7->pe);
-				return NULL;
-			}
-
-			if (NULL == insp->next || 
-			    insp->next->pe > io7->pe) { /* insert here */
-				io7->next = insp->next;
-				insp->next = io7;
-				break;
-			}
-		}
-
-		if (NULL == insp) { /* couldn't insert ?!? */
-			printk(KERN_WARNING "Failed to insert IO7 at PE %d "
-			       " - adding at head of list\n", io7->pe);
-			io7->next = io7_head;
-			io7_head = io7;
-		}
-	}
-	
-	return io7;
-}
-
-void
-io7_clear_errors(struct io7 *io7)
-{
-	io7_port7_csrs *p7csrs;
-	io7_ioport_csrs *csrs;
-	int port;
-
-
-	/*
-	 * First the IO ports.
-	 */
-	for (port = 0; port < 4; port++) {
-		csrs = IO7_CSRS_KERN(io7->pe, port);
-
-		csrs->POx_ERR_SUM.csr = -1UL;
-		csrs->POx_TLB_ERR.csr = -1UL;
-		csrs->POx_SPL_COMPLT.csr = -1UL;
-		csrs->POx_TRANS_SUM.csr = -1UL;
-	}
-
-	/*
-	 * Then the common ones.
-	 */
-	p7csrs = IO7_PORT7_CSRS_KERN(io7->pe);
-
-	p7csrs->PO7_ERROR_SUM.csr = -1UL;
-	p7csrs->PO7_UNCRR_SYM.csr = -1UL;
-	p7csrs->PO7_CRRCT_SYM.csr = -1UL;
-}
-
-
-/*
- * IO7 PCI, PCI/X, AGP configuration.
- */
-static void __init
-io7_init_hose(struct io7 *io7, int port)
-{
-	static int hose_index = 0;
-
-	struct pci_controller *hose = alloc_pci_controller();
-	struct io7_port *io7_port = &io7->ports[port];
-	io7_ioport_csrs *csrs = IO7_CSRS_KERN(io7->pe, port);
-	int i;
-
-	hose->index = hose_index++;	/* arbitrary */
-	
-	/*
-	 * We don't have an isa or legacy hose, but glibc expects to be
-	 * able to use the bus == 0 / dev == 0 form of the iobase syscall
-	 * to determine information about the i/o system. Since XFree86 
-	 * relies on glibc's determination to tell whether or not to use
-	 * sparse access, we need to point the pci_isa_hose at a real hose
-	 * so at least that determination is correct.
-	 */
-	if (hose->index == 0)
-		pci_isa_hose = hose;
-
-	io7_port->csrs = csrs;
-	io7_port->hose = hose;
-	hose->sysdata = io7_port;
-
-	hose->io_space = alloc_resource();
-	hose->mem_space = alloc_resource();
-
-	/*
-	 * Base addresses for userland consumption. Since these are going
-	 * to be mapped, they are pure physical addresses.
-	 */
-	hose->sparse_mem_base = hose->sparse_io_base = 0;
-	hose->dense_mem_base = IO7_MEM_PHYS(io7->pe, port);
-	hose->dense_io_base = IO7_IO_PHYS(io7->pe, port);
-
-	/*
-	 * Base addresses and resource ranges for kernel consumption.
-	 */
-	hose->config_space_base = (unsigned long)IO7_CONF_KERN(io7->pe, port);
-
-	hose->io_space->start = (unsigned long)IO7_IO_KERN(io7->pe, port);
-	hose->io_space->end = hose->io_space->start + IO7_IO_SPACE - 1;
-	hose->io_space->name = mk_resource_name(io7->pe, port, "IO");
-	hose->io_space->flags = IORESOURCE_IO;
-
-	hose->mem_space->start = (unsigned long)IO7_MEM_KERN(io7->pe, port);
-	hose->mem_space->end = hose->mem_space->start + IO7_MEM_SPACE - 1;
-	hose->mem_space->name = mk_resource_name(io7->pe, port, "MEM");
-	hose->mem_space->flags = IORESOURCE_MEM;
-
-	if (request_resource(&ioport_resource, hose->io_space) < 0)
-		printk(KERN_ERR "Failed to request IO on hose %d\n", 
-		       hose->index);
-	if (request_resource(&iomem_resource, hose->mem_space) < 0)
-		printk(KERN_ERR "Failed to request MEM on hose %d\n", 
-		       hose->index);
-
-	/*
-	 * Save the existing DMA window settings for later restoration.
-	 */
-	for (i = 0; i < 4; i++) {
-		io7_port->saved_wbase[i] = csrs->POx_WBASE[i].csr;
-		io7_port->saved_wmask[i] = csrs->POx_WMASK[i].csr;
-		io7_port->saved_tbase[i] = csrs->POx_TBASE[i].csr;
-	}
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 0 is scatter-gather 8MB at 8MB
-	 * Window 1 is direct access 1GB at 2GB
-	 * Window 2 is scatter-gather (up-to) 1GB at 3GB
-	 * Window 3 is disabled
-	 */
-
-	/*
-	 * TBIA before modifying windows.
-	 */
-	marvel_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Set up window 0 for scatter-gather 8MB at 8MB.
-	 */
-	hose->sg_isa = iommu_arena_new_node(marvel_cpuid_to_nid(io7->pe),
-					    hose, 0x00800000, 0x00800000, 0);
-	hose->sg_isa->align_entry = 8;	/* cache line boundary */
-	csrs->POx_WBASE[0].csr = 
-		hose->sg_isa->dma_base | wbase_m_ena | wbase_m_sg;
-	csrs->POx_WMASK[0].csr = (hose->sg_isa->size - 1) & wbase_m_addr;
-	csrs->POx_TBASE[0].csr = virt_to_phys(hose->sg_isa->ptes);
-
-	/*
-	 * Set up window 1 for direct-mapped 1GB at 2GB.
-	 */
-	csrs->POx_WBASE[1].csr = __direct_map_base | wbase_m_ena;
-	csrs->POx_WMASK[1].csr = (__direct_map_size - 1) & wbase_m_addr;
-	csrs->POx_TBASE[1].csr = 0;
-
-	/*
-	 * Set up window 2 for scatter-gather (up-to) 1GB at 3GB.
-	 */
-	hose->sg_pci = iommu_arena_new_node(marvel_cpuid_to_nid(io7->pe),
-					    hose, 0xc0000000, 0x40000000, 0);
-	hose->sg_pci->align_entry = 8;	/* cache line boundary */
-	csrs->POx_WBASE[2].csr = 
-		hose->sg_pci->dma_base | wbase_m_ena | wbase_m_sg;
-	csrs->POx_WMASK[2].csr = (hose->sg_pci->size - 1) & wbase_m_addr;
-	csrs->POx_TBASE[2].csr = virt_to_phys(hose->sg_pci->ptes);
-
-	/*
-	 * Disable window 3.
-	 */
-	csrs->POx_WBASE[3].csr = 0;
-
-	/*
-	 * Make sure that the AGP Monster Window is disabled.
-	 */
-	csrs->POx_CTRL.csr &= ~(1UL << 61);
-
-#if 1
-	printk("FIXME: disabling master aborts\n");
-	csrs->POx_MSK_HEI.csr &= ~(3UL << 14);
-#endif
-	/*
-	 * TBIA after modifying windows.
-	 */
-	marvel_pci_tbi(hose, 0, -1);
-}
-
-static void __init
-marvel_init_io7(struct io7 *io7)
-{
-	int i;
-
-	printk("Initializing IO7 at PID %d\n", io7->pe);
-
-	/*
-	 * Get the Port 7 CSR pointer.
-	 */
-	io7->csrs = IO7_PORT7_CSRS_KERN(io7->pe);
-
-	/*
-	 * Init this IO7's hoses.
-	 */
-	for (i = 0; i < IO7_NUM_PORTS; i++) {
-		io7_ioport_csrs *csrs = IO7_CSRS_KERN(io7->pe, i);
-		if (csrs->POx_CACHE_CTL.csr == 8) {
-			io7->ports[i].enabled = 1;
-			io7_init_hose(io7, i);
-		}
-	}
-}
-
-void
-marvel_io7_present(gct6_node *node)
-{
-	int pe;
-
-	if (node->type != GCT_TYPE_HOSE ||
-	    node->subtype != GCT_SUBTYPE_IO_PORT_MODULE) 
-		return;
-
-	pe = (node->id >> 8) & 0xff;
-	printk("Found an IO7 at PID %d\n", pe);
-
-	alloc_io7(pe);
-}
-
-static void __init
-marvel_find_console_vga_hose(void)
-{
-	u64 *pu64 = (u64 *)((u64)hwrpb + hwrpb->ctbt_offset);
-
-	if (pu64[7] == 3) {	/* TERM_TYPE == graphics */
-		struct pci_controller *hose = NULL;
-		int h = (pu64[30] >> 24) & 0xff; /* TERM_OUT_LOC, hose # */
-		struct io7 *io7;
-		int pid, port;
-
-		/* FIXME - encoding is going to have to change for Marvel
-		 *         since hose will be able to overflow a byte...
-		 *         need to fix this decode when the console 
-		 *         changes its encoding
-		 */
-		printk("console graphics is on hose %d (console)\n", h);
-
-		/*
-		 * The console's hose numbering is:
-		 *
-		 *	hose<n:2>: PID
-		 *	hose<1:0>: PORT
-		 *
-		 * We need to find the hose at that pid and port
-		 */
-		pid = h >> 2;
-		port = h & 3;
-		if ((io7 = marvel_find_io7(pid)))
-			hose = io7->ports[port].hose;
-
-		if (hose) {
-			printk("Console graphics on hose %d\n", hose->index);
-			pci_vga_hose = hose;
-		}
-	}
-}
-
-gct6_search_struct gct_wanted_node_list[] = {
-	{ GCT_TYPE_HOSE, GCT_SUBTYPE_IO_PORT_MODULE, marvel_io7_present },
-	{ 0, 0, NULL }
-};
-
-/*
- * In case the GCT is not complete, let the user specify PIDs with IO7s
- * at boot time. Syntax is 'io7=a,b,c,...,n' where a-n are the PIDs (decimal)
- * where IO7s are connected
- */
-static int __init
-marvel_specify_io7(char *str)
-{
-	unsigned long pid;
-	struct io7 *io7;
-	char *pchar;
-
-	do {
-		pid = simple_strtoul(str, &pchar, 0);
-		if (pchar != str) {
-			printk("User-specified IO7 at PID %lu\n", pid);
-			io7 = alloc_io7(pid);
-			if (io7) marvel_init_io7(io7);
-		}
-
-		if (pchar == str) pchar++;
-		str = pchar;
-	} while(*str);
-
-	return 1;
-}
-__setup("io7=", marvel_specify_io7);
-
-void __init
-marvel_init_arch(void)
-{
-	struct io7 *io7;
-
-	/* With multiple PCI busses, we play with I/O as physical addrs.  */
-	ioport_resource.end = ~0UL;
-
-	/* PCI DMA Direct Mapping is 1GB at 2GB.  */
-	__direct_map_base = 0x80000000;
-	__direct_map_size = 0x40000000;
-
-	/* Parse the config tree.  */
-	gct6_find_nodes(GCT_NODE_PTR(0), gct_wanted_node_list);
-
-	/* Init the io7s.  */
-	for (io7 = NULL; NULL != (io7 = marvel_next_io7(io7)); ) 
-		marvel_init_io7(io7);
-
-	/* Check for graphic console location (if any).  */
-	marvel_find_console_vga_hose();
-}
-
-void
-marvel_kill_arch(int mode)
-{
-}
-
-
-/*
- * PCI Configuration Space access functions
- *
- * Configuration space addresses have the following format:
- *
- * 	|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- * 	|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * 	+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * 	|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|R|R|
- * 	+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	 n:24	reserved for hose base
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	IO7 determines whether to use a type 0 or type 1 config cycle
- *	based on the bus number. Therefore the bus number must be set 
- *	to 0 for the root bus on any hose.
- *	
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- */
-
-static inline unsigned long
-build_conf_addr(struct pci_controller *hose, u8 bus, 
-		unsigned int devfn, int where)
-{
-	return (hose->config_space_base | (bus << 16) | (devfn << 8) | where);
-}
-
-static unsigned long
-mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	struct io7_port *io7_port;
-	unsigned long addr = 0;
-	u8 bus = pbus->number;
-
-	if (!hose)
-		return addr;
-
-	/* Check for enabled.  */
-	io7_port = hose->sysdata;
-	if (!io7_port->enabled)
-		return addr;
-
-	if (!pbus->parent) { /* No parent means peer PCI bus. */
-		/* Don't support idsel > 20 on primary bus.  */
-		if (devfn >= PCI_DEVFN(21, 0))
-			return addr;
-		bus = 0;
-	}
-
-	addr = build_conf_addr(hose, bus, devfn, where);
-
-	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return addr;
-}
-
-static int
-marvel_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 *value)
-{
-	unsigned long addr;
-	
-	if (0 == (addr = mk_conf_addr(bus, devfn, where)))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch(size) {
-	case 1:	
-		*value = __kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:	
-		*value = __kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:	
-		*value = *(vuip)addr;
-		break;
-	default:
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-marvel_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 value)
-{
-	unsigned long addr;
-	
-	if (0 == (addr = mk_conf_addr(bus, devfn, where)))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		__kernel_stb(value, *(vucp)addr);
-		mb();
-		__kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		__kernel_stw(value, *(vusp)addr);
-		mb();
-		__kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*(vuip)addr = value;
-		mb();
-		*(vuip)addr;
-		break;
-	default:
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops marvel_pci_ops =
-{
-	.read =		marvel_read_config,
-	.write = 	marvel_write_config,
-};
-
-
-/*
- * Other PCI helper functions.
- */
-void
-marvel_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	io7_ioport_csrs *csrs = ((struct io7_port *)hose->sysdata)->csrs;
-
-	wmb();
-	csrs->POx_SG_TBIA.csr = 0;
-	mb();
-	csrs->POx_SG_TBIA.csr;
-}
-
-
-
-/*
- * RTC Support
- */
-struct marvel_rtc_access_info {
-	unsigned long function;
-	unsigned long index;
-	unsigned long data;
-};
-
-static void
-__marvel_access_rtc(void *info)
-{
-	struct marvel_rtc_access_info *rtc_access = info;
-
-	register unsigned long __r0 __asm__("$0");
-	register unsigned long __r16 __asm__("$16") = rtc_access->function;
-	register unsigned long __r17 __asm__("$17") = rtc_access->index;
-	register unsigned long __r18 __asm__("$18") = rtc_access->data;
-	
-	__asm__ __volatile__(
-		"call_pal %4 # cserve rtc"
-		: "=r"(__r16), "=r"(__r17), "=r"(__r18), "=r"(__r0)
-		: "i"(PAL_cserve), "0"(__r16), "1"(__r17), "2"(__r18)
-		: "$1", "$22", "$23", "$24", "$25");
-
-	rtc_access->data = __r0;
-}
-
-static u8
-__marvel_rtc_io(u8 b, unsigned long addr, int write)
-{
-	static u8 index = 0;
-
-	struct marvel_rtc_access_info rtc_access;
-	u8 ret = 0;
-
-	switch(addr) {
-	case 0x70:					/* RTC_PORT(0) */
-		if (write) index = b;
-		ret = index;
-		break;
-
-	case 0x71:					/* RTC_PORT(1) */
-		rtc_access.index = index;
-		rtc_access.data = bcd2bin(b);
-		rtc_access.function = 0x48 + !write;	/* GET/PUT_TOY */
-
-		__marvel_access_rtc(&rtc_access);
-
-		ret = bin2bcd(rtc_access.data);
-		break;
-
-	default:
-		printk(KERN_WARNING "Illegal RTC port %lx\n", addr);
-		break;
-	}
-
-	return ret;
-}
-
-
-/*
- * IO map support.
- */
-void __iomem *
-marvel_ioremap(unsigned long addr, unsigned long size)
-{
-	struct pci_controller *hose;
-	unsigned long baddr, last;
-	struct vm_struct *area;
-	unsigned long vaddr;
-	unsigned long *ptes;
-	unsigned long pfn;
-
-	/*
-	 * Adjust the address.
-	 */ 
-	FIXUP_MEMADDR_VGA(addr);
-
-	/*
-	 * Find the hose.
-	 */
-	for (hose = hose_head; hose; hose = hose->next) {
-		if ((addr >> 32) == (hose->mem_space->start >> 32))
-			break; 
-	}
-	if (!hose)
-		return NULL;
-
-	/*
-	 * We have the hose - calculate the bus limits.
-	 */
-	baddr = addr - hose->mem_space->start;
-	last = baddr + size - 1;
-
-	/*
-	 * Is it direct-mapped?
-	 */
-	if ((baddr >= __direct_map_base) && 
-	    ((baddr + size - 1) < __direct_map_base + __direct_map_size)) {
-		addr = IDENT_ADDR | (baddr - __direct_map_base);
-		return (void __iomem *) addr;
-	}
-
-	/* 
-	 * Check the scatter-gather arena.
-	 */
-	if (hose->sg_pci &&
-	    baddr >= (unsigned long)hose->sg_pci->dma_base &&
-	    last < (unsigned long)hose->sg_pci->dma_base + hose->sg_pci->size) {
-
-		/*
-		 * Adjust the limits (mappings must be page aligned)
-		 */
-		baddr -= hose->sg_pci->dma_base;
-		last -= hose->sg_pci->dma_base;
-		baddr &= PAGE_MASK;
-		size = PAGE_ALIGN(last) - baddr;
-
-		/*
-		 * Map it.
-		 */
-		area = get_vm_area(size, VM_IOREMAP);
-		if (!area)
-			return NULL;
-
-		ptes = hose->sg_pci->ptes;
-		for (vaddr = (unsigned long)area->addr; 
-		    baddr <= last; 
-		    baddr += PAGE_SIZE, vaddr += PAGE_SIZE) {
-			pfn = ptes[baddr >> PAGE_SHIFT];
-			if (!(pfn & 1)) {
-				printk("ioremap failed... pte not valid...\n");
-				vfree(area->addr);
-				return NULL;
-			}
-			pfn >>= 1;	/* make it a true pfn */
-			
-			if (__alpha_remap_area_pages(vaddr,
-						     pfn << PAGE_SHIFT, 
-						     PAGE_SIZE, 0)) {
-				printk("FAILED to map...\n");
-				vfree(area->addr);
-				return NULL;
-			}
-		}
-
-		flush_tlb_all();
-
-		vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
-
-		return (void __iomem *) vaddr;
-	}
-
-	/* Assume it was already a reasonable address */
-	vaddr = baddr + hose->mem_space->start;
-	return (void __iomem *) vaddr;
-}
-
-void
-marvel_iounmap(volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr >= VMALLOC_START)
-		vfree((void *)(PAGE_MASK & addr)); 
-}
-
-int
-marvel_is_mmio(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-
-	if (addr >= VMALLOC_START)
-		return 1;
-	else
-		return (addr & 0xFF000000UL) == 0;
-}
-
-#define __marvel_is_port_kbd(a)	(((a) == 0x60) || ((a) == 0x64))
-#define __marvel_is_port_rtc(a)	(((a) == 0x70) || ((a) == 0x71))
-
-void __iomem *marvel_ioportmap (unsigned long addr)
-{
-	FIXUP_IOADDR_VGA(addr);
-	return (void __iomem *)addr;
-}
-
-unsigned int
-marvel_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (__marvel_is_port_kbd(addr))
-		return 0;
-	else if (__marvel_is_port_rtc(addr))
-		return __marvel_rtc_io(0, addr, 0);
-	else if (marvel_is_ioaddr(addr))
-		return __kernel_ldbu(*(vucp)addr);
-	else
-		/* this should catch other legacy addresses
-		   that would normally fail on MARVEL,
-		   because there really is nothing there...
-		*/
-		return ~0;
-}
-
-void
-marvel_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (__marvel_is_port_kbd(addr))
-		return;
-	else if (__marvel_is_port_rtc(addr)) 
-		__marvel_rtc_io(b, addr, 1);
-	else if (marvel_is_ioaddr(addr))
-		__kernel_stb(b, *(vucp)addr);
-}
-
-#ifndef CONFIG_ALPHA_GENERIC
-EXPORT_SYMBOL(marvel_ioremap);
-EXPORT_SYMBOL(marvel_iounmap);
-EXPORT_SYMBOL(marvel_is_mmio);
-EXPORT_SYMBOL(marvel_ioportmap);
-EXPORT_SYMBOL(marvel_ioread8);
-EXPORT_SYMBOL(marvel_iowrite8);
-#endif
-
-/*
- * NUMA Support
- */
-/**********
- * FIXME - for now each cpu is a node by itself 
- *              -- no real support for striped mode 
- **********
- */
-int
-marvel_pa_to_nid(unsigned long pa)
-{
-	int cpuid;
-
-	if ((pa >> 43) & 1) 	/* I/O */ 
-		cpuid = (~(pa >> 35) & 0xff);
-	else			/* mem */
-		cpuid = ((pa >> 34) & 0x3) | ((pa >> (37 - 2)) & (0x1f << 2));
-
-	return marvel_cpuid_to_nid(cpuid);
-}
-
-int
-marvel_cpuid_to_nid(int cpuid)
-{
-	return cpuid;
-}
-
-unsigned long
-marvel_node_mem_start(int nid)
-{
-	unsigned long pa;
-
-	pa = (nid & 0x3) | ((nid & (0x1f << 2)) << 1);
-	pa <<= 34;
-
-	return pa;
-}
-
-unsigned long
-marvel_node_mem_size(int nid)
-{
-	return 16UL * 1024 * 1024 * 1024; /* 16GB */
-}
-
-
-/* 
- * AGP GART Support.
- */
-#include <linux/agp_backend.h>
-#include <asm/agp_backend.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-struct marvel_agp_aperture {
-	struct pci_iommu_arena *arena;
-	long pg_start;
-	long pg_count;
-};
-
-static int
-marvel_agp_setup(alpha_agp_info *agp)
-{
-	struct marvel_agp_aperture *aper;
-
-	if (!alpha_agpgart_size)
-		return -ENOMEM;
-
-	aper = kmalloc(sizeof(*aper), GFP_KERNEL);
-	if (aper == NULL) return -ENOMEM;
-
-	aper->arena = agp->hose->sg_pci;
-	aper->pg_count = alpha_agpgart_size / PAGE_SIZE;
-	aper->pg_start = iommu_reserve(aper->arena, aper->pg_count,
-				       aper->pg_count - 1);
-
-	if (aper->pg_start < 0) {
-		printk(KERN_ERR "Failed to reserve AGP memory\n");
-		kfree(aper);
-		return -ENOMEM;
-	}
-
-	agp->aperture.bus_base = 
-		aper->arena->dma_base + aper->pg_start * PAGE_SIZE;
-	agp->aperture.size = aper->pg_count * PAGE_SIZE;
-	agp->aperture.sysdata = aper;
-
-	return 0;
-}
-
-static void
-marvel_agp_cleanup(alpha_agp_info *agp)
-{
-	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
-	int status;
-
-	status = iommu_release(aper->arena, aper->pg_start, aper->pg_count);
-	if (status == -EBUSY) {
-		printk(KERN_WARNING
-		       "Attempted to release bound AGP memory - unbinding\n");
-		iommu_unbind(aper->arena, aper->pg_start, aper->pg_count);
-		status = iommu_release(aper->arena, aper->pg_start, 
-				       aper->pg_count);
-	}
-	if (status < 0)
-		printk(KERN_ERR "Failed to release AGP memory\n");
-
-	kfree(aper);
-	kfree(agp);
-}
-
-static int
-marvel_agp_configure(alpha_agp_info *agp)
-{
-	io7_ioport_csrs *csrs = ((struct io7_port *)agp->hose->sysdata)->csrs;
-	struct io7 *io7 = ((struct io7_port *)agp->hose->sysdata)->io7;
-	unsigned int new_rate = 0;
-	unsigned long agp_pll;
-
-	/*
-	 * Check the requested mode against the PLL setting.
-	 * The agpgart_be code has not programmed the card yet,
-	 * so we can still tweak mode here.
-	 */
-	agp_pll = io7->csrs->POx_RST[IO7_AGP_PORT].csr;
-	switch(IO7_PLL_RNGB(agp_pll)) {
-	case 0x4:				/* 2x only */
-		/* 
-		 * The PLL is only programmed for 2x, so adjust the
-		 * rate to 2x, if necessary.
-		 */
-		if (agp->mode.bits.rate != 2) 
-			new_rate = 2;
-		break;
-
-	case 0x6:				/* 1x / 4x */
-		/*
-		 * The PLL is programmed for 1x or 4x.  Don't go faster
-		 * than requested, so if the requested rate is 2x, use 1x.
-		 */
-		if (agp->mode.bits.rate == 2) 
-			new_rate = 1;
-		break;
-
-	default:				/* ??????? */
-		/*
-		 * Don't know what this PLL setting is, take the requested
-		 * rate, but warn the user.
-		 */
-		printk("%s: unknown PLL setting RNGB=%lx (PLL6_CTL=%016lx)\n",
-		       __func__, IO7_PLL_RNGB(agp_pll), agp_pll);
-		break;
-	}
-
-	/*
-	 * Set the new rate, if necessary.
-	 */
-	if (new_rate) {
-		printk("Requested AGP Rate %dX not compatible "
-		       "with PLL setting - using %dX\n",
-		       agp->mode.bits.rate,
-		       new_rate);
-
-		agp->mode.bits.rate = new_rate;
-	}
-		
-	printk("Enabling AGP on hose %d: %dX%s RQ %d\n", 
-	       agp->hose->index, agp->mode.bits.rate, 
-	       agp->mode.bits.sba ? " - SBA" : "", agp->mode.bits.rq);
-
-	csrs->AGP_CMD.csr = agp->mode.lw;
-
-	return 0;
-}
-
-static int 
-marvel_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
-{
-	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
-	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
-			  mem->page_count, mem->pages);
-}
-
-static int 
-marvel_agp_unbind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
-{
-	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
-	return iommu_unbind(aper->arena, aper->pg_start + pg_start,
-			    mem->page_count);
-}
-
-static unsigned long
-marvel_agp_translate(alpha_agp_info *agp, dma_addr_t addr)
-{
-	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
-	unsigned long baddr = addr - aper->arena->dma_base;
-	unsigned long pte;
-
-	if (addr < agp->aperture.bus_base ||
-	    addr >= agp->aperture.bus_base + agp->aperture.size) {
-		printk("%s: addr out of range\n", __func__);
-		return -EINVAL;
-	}
-
-	pte = aper->arena->ptes[baddr >> PAGE_SHIFT];
-	if (!(pte & 1)) {
-		printk("%s: pte not valid\n", __func__);
-		return -EINVAL;
-	} 
-	return (pte >> 1) << PAGE_SHIFT;
-}
-
-struct alpha_agp_ops marvel_agp_ops =
-{
-	.setup		= marvel_agp_setup,
-	.cleanup	= marvel_agp_cleanup,
-	.configure	= marvel_agp_configure,
-	.bind		= marvel_agp_bind_memory,
-	.unbind		= marvel_agp_unbind_memory,
-	.translate	= marvel_agp_translate
-};
-
-alpha_agp_info *
-marvel_agp_info(void)
-{
-	struct pci_controller *hose;
-	io7_ioport_csrs *csrs;
-	alpha_agp_info *agp;
-	struct io7 *io7;
-
-	/*
-	 * Find the first IO7 with an AGP card.
-	 *
-	 * FIXME -- there should be a better way (we want to be able to
-	 * specify and what if the agp card is not video???)
-	 */
-	hose = NULL;
-	for (io7 = NULL; (io7 = marvel_next_io7(io7)) != NULL; ) {
-		struct pci_controller *h;
-		vuip addr;
-
-		if (!io7->ports[IO7_AGP_PORT].enabled)
-			continue;
-
-		h = io7->ports[IO7_AGP_PORT].hose;
-		addr = (vuip)build_conf_addr(h, 0, PCI_DEVFN(5, 0), 0);
-
-		if (*addr != 0xffffffffu) {
-			hose = h;
-			break;
-		}
-	}
-
-	if (!hose || !hose->sg_pci)
-		return NULL;
-
-	printk("MARVEL - using hose %d as AGP\n", hose->index);
-
-	/* 
-	 * Get the csrs from the hose.
-	 */
-	csrs = ((struct io7_port *)hose->sysdata)->csrs;
-
-	/*
-	 * Allocate the info structure.
-	 */
-	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
-	if (!agp)
-		return NULL;
-
-	/*
-	 * Fill it in.
-	 */
-	agp->hose = hose;
-	agp->private = NULL;
-	agp->ops = &marvel_agp_ops;
-
-	/*
-	 * Aperture - not configured until ops.setup().
-	 */
-	agp->aperture.bus_base = 0;
-	agp->aperture.size = 0;
-	agp->aperture.sysdata = NULL;
-
-	/*
-	 * Capabilities.
-	 *
-	 * NOTE: IO7 reports through AGP_STAT that it can support a read queue
-	 *       depth of 17 (rq = 0x10). It actually only supports a depth of
-	 * 	 16 (rq = 0xf).
-	 */
-	agp->capability.lw = csrs->AGP_STAT.csr;
-	agp->capability.bits.rq = 0xf;
-	
-	/*
-	 * Mode.
-	 */
-	agp->mode.lw = csrs->AGP_CMD.csr;
-
-	return agp;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_mcpcia.c b/ANDROID_3.4.5/arch/alpha/kernel/core_mcpcia.c
deleted file mode 100644
index da7bcc37..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_mcpcia.c
+++ /dev/null
@@ -1,613 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_mcpcia.c
- *
- * Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
- *
- * Code common to all MCbus-PCI Adaptor core logic chipsets
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_mcpcia.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/ptrace.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CFG 0
-
-#if DEBUG_CFG
-# define DBG_CFG(args)	printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the MCPCIA_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1,
-	  struct pci_controller *hose)
-{
-	unsigned long flags;
-	unsigned long mid = MCPCIA_HOSE2MID(hose->index);
-	unsigned int stat0, value, cpu;
-
-	cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	DBG_CFG(("conf_read(addr=0x%lx, type1=%d, hose=%d)\n",
-		 addr, type1, mid));
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
-	*(vuip)MCPCIA_CAP_ERR(mid) = stat0;
-	mb();
-	*(vuip)MCPCIA_CAP_ERR(mid);
-	DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0));
-
-	mb();
-	draina();
-	mcheck_expected(cpu) = 1;
-	mcheck_taken(cpu) = 0;
-	mcheck_extra(cpu) = mid;
-	mb();
-
-	/* Access configuration space.  */
-	value = *((vuip)addr);
-	mb();
-	mb();  /* magic */
-
-	if (mcheck_taken(cpu)) {
-		mcheck_taken(cpu) = 0;
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(cpu) = 0;
-	mb();
-
-	DBG_CFG(("conf_read(): finished\n"));
-
-	local_irq_restore(flags);
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1,
-	   struct pci_controller *hose)
-{
-	unsigned long flags;
-	unsigned long mid = MCPCIA_HOSE2MID(hose->index);
-	unsigned int stat0, cpu;
-
-	cpu = smp_processor_id();
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
-	*(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb();
-	*(vuip)MCPCIA_CAP_ERR(mid);
-	DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0));
-
-	draina();
-	mcheck_expected(cpu) = 1;
-	mcheck_extra(cpu) = mid;
-	mb();
-
-	/* Access configuration space.  */
-	*((vuip)addr) = value;
-	mb();
-	mb();  /* magic */
-	*(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
-	mcheck_expected(cpu) = 0;
-	mb();
-
-	DBG_CFG(("conf_write(): finished\n"));
-	local_irq_restore(flags);
-}
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where,
-	     struct pci_controller *hose, unsigned long *pci_addr,
-	     unsigned char *type1)
-{
-	u8 bus = pbus->number;
-	unsigned long addr;
-
-	DBG_CFG(("mk_conf_addr(bus=%d,devfn=0x%x,hose=%d,where=0x%x,"
-		 " pci_addr=0x%p, type1=0x%p)\n",
-		 bus, devfn, hose->index, where, pci_addr, type1));
-
-	/* Type 1 configuration cycle for *ALL* busses.  */
-	*type1 = 1;
-
-	if (!pbus->parent) /* No parent means peer PCI bus. */
-		bus = 0;
-	addr = (bus << 16) | (devfn << 8) | (where);
-	addr <<= 5; /* swizzle for SPARSE */
-	addr |= hose->config_space_base;
-
-	*pci_addr = addr;
-	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static int
-mcpcia_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 *value)
-{
-	struct pci_controller *hose = bus->sysdata;
-	unsigned long addr, w;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr |= (size - 1) * 8;
-	w = conf_read(addr, type1, hose);
-	switch (size) {
-	case 1:
-		*value = __kernel_extbl(w, where & 3);
-		break;
-	case 2:
-		*value = __kernel_extwl(w, where & 3);
-		break;
-	case 4:
-		*value = w;
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mcpcia_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 value)
-{
-	struct pci_controller *hose = bus->sysdata;
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr |= (size - 1) * 8;
-	value = __kernel_insql(value, where & 3);
-	conf_write(addr, value, type1, hose);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops mcpcia_pci_ops = 
-{
-	.read =		mcpcia_read_config,
-	.write =	mcpcia_write_config,
-};
-
-void
-mcpcia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vuip)MCPCIA_SG_TBIA(MCPCIA_HOSE2MID(hose->index)) = 0;
-	mb();
-}
-
-static int __init
-mcpcia_probe_hose(int h)
-{
-	int cpu = smp_processor_id();
-	int mid = MCPCIA_HOSE2MID(h);
-	unsigned int pci_rev;
-
-	/* Gotta be REAL careful.  If hose is absent, we get an mcheck.  */
-
-	mb();
-	mb();
-	draina();
-	wrmces(7);
-
-	mcheck_expected(cpu) = 2;	/* indicates probing */
-	mcheck_taken(cpu) = 0;
-	mcheck_extra(cpu) = mid;
-	mb();
-
-	/* Access the bus revision word. */
-	pci_rev = *(vuip)MCPCIA_REV(mid);
-
-	mb();
-	mb();  /* magic */
-	if (mcheck_taken(cpu)) {
-		mcheck_taken(cpu) = 0;
-		pci_rev = 0xffffffff;
-		mb();
-	}
-	mcheck_expected(cpu) = 0;
-	mb();
-
-	return (pci_rev >> 16) == PCI_CLASS_BRIDGE_HOST;
-}
-
-static void __init
-mcpcia_new_hose(int h)
-{
-	struct pci_controller *hose;
-	struct resource *io, *mem, *hae_mem;
-	int mid = MCPCIA_HOSE2MID(h);
-
-	hose = alloc_pci_controller();
-	if (h == 0)
-		pci_isa_hose = hose;
-	io = alloc_resource();
-	mem = alloc_resource();
-	hae_mem = alloc_resource();
-			
-	hose->io_space = io;
-	hose->mem_space = hae_mem;
-	hose->sparse_mem_base = MCPCIA_SPARSE(mid) - IDENT_ADDR;
-	hose->dense_mem_base = MCPCIA_DENSE(mid) - IDENT_ADDR;
-	hose->sparse_io_base = MCPCIA_IO(mid) - IDENT_ADDR;
-	hose->dense_io_base = 0;
-	hose->config_space_base = MCPCIA_CONF(mid);
-	hose->index = h;
-
-	io->start = MCPCIA_IO(mid) - MCPCIA_IO_BIAS;
-	io->end = io->start + 0xffff;
-	io->name = pci_io_names[h];
-	io->flags = IORESOURCE_IO;
-
-	mem->start = MCPCIA_DENSE(mid) - MCPCIA_MEM_BIAS;
-	mem->end = mem->start + 0xffffffff;
-	mem->name = pci_mem_names[h];
-	mem->flags = IORESOURCE_MEM;
-
-	hae_mem->start = mem->start;
-	hae_mem->end = mem->start + MCPCIA_MEM_MASK;
-	hae_mem->name = pci_hae0_name;
-	hae_mem->flags = IORESOURCE_MEM;
-
-	if (request_resource(&ioport_resource, io) < 0)
-		printk(KERN_ERR "Failed to request IO on hose %d\n", h);
-	if (request_resource(&iomem_resource, mem) < 0)
-		printk(KERN_ERR "Failed to request MEM on hose %d\n", h);
-	if (request_resource(mem, hae_mem) < 0)
-		printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h);
-}
-
-static void
-mcpcia_pci_clr_err(int mid)
-{
-	*(vuip)MCPCIA_CAP_ERR(mid);
-	*(vuip)MCPCIA_CAP_ERR(mid) = 0xffffffff;   /* Clear them all.  */
-	mb();
-	*(vuip)MCPCIA_CAP_ERR(mid);  /* Re-read for force write.  */
-}
-
-static void __init
-mcpcia_startup_hose(struct pci_controller *hose)
-{
-	int mid = MCPCIA_HOSE2MID(hose->index);
-	unsigned int tmp;
-
-	mcpcia_pci_clr_err(mid);
-
-	/* 
-	 * Set up error reporting.
-	 */
-	tmp = *(vuip)MCPCIA_CAP_ERR(mid);
-	tmp |= 0x0006;		/* master/target abort */
-	*(vuip)MCPCIA_CAP_ERR(mid) = tmp;
-	mb();
-	tmp = *(vuip)MCPCIA_CAP_ERR(mid);
-
-	/*
-	 * Set up the PCI->physical memory translation windows.
-	 *
-	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
-	 * Window 1 is scatter-gather (up to) 1GB at 1GB (for pci)
-	 * Window 2 is direct access 2GB at 2GB
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
-	hose->sg_pci = iommu_arena_new(hose, 0x40000000,
-				       size_for_memory(0x40000000), 0);
-
-	__direct_map_base = 0x80000000;
-	__direct_map_size = 0x80000000;
-
-	*(vuip)MCPCIA_W0_BASE(mid) = hose->sg_isa->dma_base | 3;
-	*(vuip)MCPCIA_W0_MASK(mid) = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vuip)MCPCIA_T0_BASE(mid) = virt_to_phys(hose->sg_isa->ptes) >> 8;
-
-	*(vuip)MCPCIA_W1_BASE(mid) = hose->sg_pci->dma_base | 3;
-	*(vuip)MCPCIA_W1_MASK(mid) = (hose->sg_pci->size - 1) & 0xfff00000;
-	*(vuip)MCPCIA_T1_BASE(mid) = virt_to_phys(hose->sg_pci->ptes) >> 8;
-
-	*(vuip)MCPCIA_W2_BASE(mid) = __direct_map_base | 1;
-	*(vuip)MCPCIA_W2_MASK(mid) = (__direct_map_size - 1) & 0xfff00000;
-	*(vuip)MCPCIA_T2_BASE(mid) = 0;
-
-	*(vuip)MCPCIA_W3_BASE(mid) = 0x0;
-
-	mcpcia_pci_tbi(hose, 0, -1);
-
-	*(vuip)MCPCIA_HBASE(mid) = 0x0;
-	mb();
-
-	*(vuip)MCPCIA_HAE_MEM(mid) = 0U;
-	mb();
-	*(vuip)MCPCIA_HAE_MEM(mid); /* read it back. */
-	*(vuip)MCPCIA_HAE_IO(mid) = 0;
-	mb();
-	*(vuip)MCPCIA_HAE_IO(mid);  /* read it back. */
-}
-
-void __init
-mcpcia_init_arch(void)
-{
-	/* With multiple PCI busses, we play with I/O as physical addrs.  */
-	ioport_resource.end = ~0UL;
-
-	/* Allocate hose 0.  That's the one that all the ISA junk hangs
-	   off of, from which we'll be registering stuff here in a bit.
-	   Other hose detection is done in mcpcia_init_hoses, which is
-	   called from init_IRQ.  */
-
-	mcpcia_new_hose(0);
-}
-
-/* This is called from init_IRQ, since we cannot take interrupts
-   before then.  Which means we cannot do this in init_arch.  */
-
-void __init
-mcpcia_init_hoses(void)
-{
-	struct pci_controller *hose;
-	int hose_count;
-	int h;
-
-	/* First, find how many hoses we have.  */
-	hose_count = 0;
-	for (h = 0; h < MCPCIA_MAX_HOSES; ++h) {
-		if (mcpcia_probe_hose(h)) {
-			if (h != 0)
-				mcpcia_new_hose(h);
-			hose_count++;
-		}
-	}
-
-	printk("mcpcia_init_hoses: found %d hoses\n", hose_count);
-
-	/* Now do init for each hose.  */
-	for (hose = hose_head; hose; hose = hose->next)
-		mcpcia_startup_hose(hose);
-}
-
-static void
-mcpcia_print_uncorrectable(struct el_MCPCIA_uncorrected_frame_mcheck *logout)
-{
-	struct el_common_EV5_uncorrectable_mcheck *frame;
-	int i;
-
-	frame = &logout->procdata;
-
-	/* Print PAL fields */
-	for (i = 0; i < 24; i += 2) {
-		printk("  paltmp[%d-%d] = %16lx %16lx\n",
-		       i, i+1, frame->paltemp[i], frame->paltemp[i+1]);
-	}
-	for (i = 0; i < 8; i += 2) {
-		printk("  shadow[%d-%d] = %16lx %16lx\n",
-		       i, i+1, frame->shadow[i], 
-		       frame->shadow[i+1]);
-	}
-	printk("  Addr of excepting instruction  = %16lx\n",
-	       frame->exc_addr);
-	printk("  Summary of arithmetic traps    = %16lx\n",
-	       frame->exc_sum);
-	printk("  Exception mask                 = %16lx\n",
-	       frame->exc_mask);
-	printk("  Base address for PALcode       = %16lx\n",
-	       frame->pal_base);
-	printk("  Interrupt Status Reg           = %16lx\n",
-	       frame->isr);
-	printk("  CURRENT SETUP OF EV5 IBOX      = %16lx\n",
-	       frame->icsr);
-	printk("  I-CACHE Reg %s parity error   = %16lx\n",
-	       (frame->ic_perr_stat & 0x800L) ? 
-	       "Data" : "Tag", 
-	       frame->ic_perr_stat); 
-	printk("  D-CACHE error Reg              = %16lx\n",
-	       frame->dc_perr_stat);
-	if (frame->dc_perr_stat & 0x2) {
-		switch (frame->dc_perr_stat & 0x03c) {
-		case 8:
-			printk("    Data error in bank 1\n");
-			break;
-		case 4:
-			printk("    Data error in bank 0\n");
-			break;
-		case 20:
-			printk("    Tag error in bank 1\n");
-			break;
-		case 10:
-			printk("    Tag error in bank 0\n");
-			break;
-		}
-	}
-	printk("  Effective VA                   = %16lx\n",
-	       frame->va);
-	printk("  Reason for D-stream            = %16lx\n",
-	       frame->mm_stat);
-	printk("  EV5 SCache address             = %16lx\n",
-	       frame->sc_addr);
-	printk("  EV5 SCache TAG/Data parity     = %16lx\n",
-	       frame->sc_stat);
-	printk("  EV5 BC_TAG_ADDR                = %16lx\n",
-	       frame->bc_tag_addr);
-	printk("  EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
-	       frame->ei_addr);
-	printk("  Fill Syndrome                  = %16lx\n",
-	       frame->fill_syndrome);
-	printk("  EI_STAT reg                    = %16lx\n",
-	       frame->ei_stat);
-	printk("  LD_LOCK                        = %16lx\n",
-	       frame->ld_lock);
-}
-
-static void
-mcpcia_print_system_area(unsigned long la_ptr)
-{
-	struct el_common *frame;
-	struct pci_controller *hose;
-
-	struct IOD_subpacket {
-	  unsigned long base;
-	  unsigned int whoami;
-	  unsigned int rsvd1;
-	  unsigned int pci_rev;
-	  unsigned int cap_ctrl;
-	  unsigned int hae_mem;
-	  unsigned int hae_io;
-	  unsigned int int_ctl;
-	  unsigned int int_reg;
-	  unsigned int int_mask0;
-	  unsigned int int_mask1;
-	  unsigned int mc_err0;
-	  unsigned int mc_err1;
-	  unsigned int cap_err;
-	  unsigned int rsvd2;
-	  unsigned int pci_err1;
-	  unsigned int mdpa_stat;
-	  unsigned int mdpa_syn;
-	  unsigned int mdpb_stat;
-	  unsigned int mdpb_syn;
-	  unsigned int rsvd3;
-	  unsigned int rsvd4;
-	  unsigned int rsvd5;
-	} *iodpp;
-
-	frame = (struct el_common *)la_ptr;
-	iodpp = (struct IOD_subpacket *) (la_ptr + frame->sys_offset);
-
-	for (hose = hose_head; hose; hose = hose->next, iodpp++) {
-
-	  printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
-		 hose->index, iodpp->base);
-	  printk("  WHOAMI      = %8x\n", iodpp->whoami);
-	  printk("  PCI_REV     = %8x\n", iodpp->pci_rev);
-	  printk("  CAP_CTRL    = %8x\n", iodpp->cap_ctrl);
-	  printk("  HAE_MEM     = %8x\n", iodpp->hae_mem);
-	  printk("  HAE_IO      = %8x\n", iodpp->hae_io);
-	  printk("  INT_CTL     = %8x\n", iodpp->int_ctl);
-	  printk("  INT_REG     = %8x\n", iodpp->int_reg);
-	  printk("  INT_MASK0   = %8x\n", iodpp->int_mask0);
-	  printk("  INT_MASK1   = %8x\n", iodpp->int_mask1);
-	  printk("  MC_ERR0     = %8x\n", iodpp->mc_err0);
-	  printk("  MC_ERR1     = %8x\n", iodpp->mc_err1);
-	  printk("  CAP_ERR     = %8x\n", iodpp->cap_err);
-	  printk("  PCI_ERR1    = %8x\n", iodpp->pci_err1);
-	  printk("  MDPA_STAT   = %8x\n", iodpp->mdpa_stat);
-	  printk("  MDPA_SYN    = %8x\n", iodpp->mdpa_syn);
-	  printk("  MDPB_STAT   = %8x\n", iodpp->mdpb_stat);
-	  printk("  MDPB_SYN    = %8x\n", iodpp->mdpb_syn);
-	}
-}
-
-void
-mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
-	unsigned int cpu = smp_processor_id();
-	int expected;
-
-	mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
-	expected = mcheck_expected(cpu);
-
-	mb();
-	mb();  /* magic */
-	draina();
-
-	switch (expected) {
-	case 0:
-	    {
-		/* FIXME: how do we figure out which hose the
-		   error was on?  */	
-		struct pci_controller *hose;
-		for (hose = hose_head; hose; hose = hose->next)
-			mcpcia_pci_clr_err(MCPCIA_HOSE2MID(hose->index));
-		break;
-	    }
-	case 1:
-		mcpcia_pci_clr_err(mcheck_extra(cpu));
-		break;
-	default:
-		/* Otherwise, we're being called from mcpcia_probe_hose
-		   and there's no hose clear an error from.  */
-		break;
-	}
-
-	wrmces(0x7);
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "MCPCIA", expected != 0);
-	if (!expected && vector != 0x620 && vector != 0x630) {
-		mcpcia_print_uncorrectable(mchk_logout);
-		mcpcia_print_system_area(la_ptr);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_polaris.c b/ANDROID_3.4.5/arch/alpha/kernel/core_polaris.c
deleted file mode 100644
index c5a271d3..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_polaris.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- *      linux/arch/alpha/kernel/core_polaris.c
- *
- * POLARIS chip-specific code
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_polaris.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBG_CFG(args)	printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address.  This is fairly straightforward
- * on POLARIS, since the chip itself generates Type 0 or Type 1
- * cycles automatically depending on the bus number (Bus 0 is
- * hardwired to Type 0, all others are Type 1.  Peer bridges
- * are not supported).
- *
- * All types:
- *
- *  3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., scsi and ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, u8 *type1)
-{
-	u8 bus = pbus->number;
-
-	*type1 = (bus == 0) ? 0 : 1;
-	*pci_addr = (bus << 16) | (device_fn << 8) | (where) |
-		    POLARIS_DENSE_CONFIG_BASE;
-
-        DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-                 " returning address 0x%p\n"
-                 bus, device_fn, where, *pci_addr));
-
-	return 0;
-}
-
-static int
-polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 *value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-                return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		*value = __kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		*value = __kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*value = *(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int 
-polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-                return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		__kernel_stb(value, *(vucp)addr);
-		mb();
-		__kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		__kernel_stw(value, *(vusp)addr);
-		mb();
-		__kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*(vuip)addr = value;
-		mb();
-		*(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops polaris_pci_ops = 
-{
-	.read =		polaris_read_config,
-	.write =	polaris_write_config,
-};
-
-void __init
-polaris_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/* May need to initialize error reporting (see PCICTL0/1), but
-	 * for now assume that the firmware has done the right thing
-	 * already.
-	 */
-#if 0
-	printk("polaris_init_arch(): trusting firmware for setup\n");
-#endif
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = 0;
-	hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR;
-	hose->sparse_io_base = 0;
-	hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-
-	/* The I/O window is fixed at 2G @ 2G.  */
-	__direct_map_base = 0x80000000;
-	__direct_map_size = 0x80000000;
-}
-
-static inline void
-polaris_pci_clr_err(void)
-{
-	*(vusp)POLARIS_W_STATUS;
-	/* Write 1's to settable bits to clear errors */
-	*(vusp)POLARIS_W_STATUS = 0x7800;
-	mb();
-	*(vusp)POLARIS_W_STATUS;
-}
-
-void
-polaris_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	/* Clear the error before any reporting.  */
-	mb();
-	mb();
-	draina();
-	polaris_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "POLARIS",
-			    mcheck_expected(0));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_t2.c b/ANDROID_3.4.5/arch/alpha/kernel/core_t2.c
deleted file mode 100644
index 3ada4f7b..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_t2.c
+++ /dev/null
@@ -1,623 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_t2.c
- *
- * Written by Jay A Estabrook (jestabro@amt.tay1.dec.com).
- * December 1996.
- *
- * based on CIA code by David A Rusling (david.rusling@reo.mts.dec.com)
- *
- * Code common to all T2 core logic chips.
- */
-
-#define __EXTERN_INLINE
-#include <asm/io.h>
-#include <asm/core_t2.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/delay.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/* For dumping initial DMA window settings. */
-#define DEBUG_PRINT_INITIAL_SETTINGS 0
-
-/* For dumping final DMA window settings. */
-#define DEBUG_PRINT_FINAL_SETTINGS 0
-
-/*
- * By default, we direct-map starting at 2GB, in order to allow the
- * maximum size direct-map window (2GB) to match the maximum amount of
- * memory (2GB) that can be present on SABLEs. But that limits the
- * floppy to DMA only via the scatter/gather window set up for 8MB
- * ISA DMA, since the maximum ISA DMA address is 2GB-1.
- *
- * For now, this seems a reasonable trade-off: even though most SABLEs
- * have less than 1GB of memory, floppy usage/performance will not
- * really be affected by forcing it to go via scatter/gather...
- */
-#define T2_DIRECTMAP_2G 1
-
-#if T2_DIRECTMAP_2G
-# define T2_DIRECTMAP_START	0x80000000UL
-# define T2_DIRECTMAP_LENGTH	0x80000000UL
-#else
-# define T2_DIRECTMAP_START	0x40000000UL
-# define T2_DIRECTMAP_LENGTH	0x40000000UL
-#endif
-
-/* The ISA scatter/gather window settings. */
-#define T2_ISA_SG_START		0x00800000UL
-#define T2_ISA_SG_LENGTH	0x00800000UL
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBG(args)	printk args
-#else
-# define DBG(args)
-#endif
-
-static volatile unsigned int t2_mcheck_any_expected;
-static volatile unsigned int t2_mcheck_last_taken;
-
-/* Place to save the DMA Window registers as set up by SRM
-   for restoration during shutdown. */
-static struct
-{
-	struct {
-		unsigned long wbase;
-		unsigned long wmask;
-		unsigned long tbase;
-	} window[2];
-	unsigned long hae_1;
-  	unsigned long hae_2;
-	unsigned long hae_3;
-	unsigned long hae_4;
-	unsigned long hbase;
-} t2_saved_config __attribute((common));
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the T2_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBG(("mk_conf_addr(bus=%d, dfn=0x%x, where=0x%x,"
-	     " addr=0x%lx, type1=0x%x)\n",
-	     bus, device_fn, where, pci_addr, type1));
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-
-		/* Type 0 configuration cycle.  */
-
-		if (device > 8) {
-			DBG(("mk_conf_addr: device (%d)>20, returning -1\n",
-			     device));
-			return -1;
-		}
-
-		*type1 = 0;
-		addr = (0x0800L << device) | ((device_fn & 7) << 8) | (where);
-	} else {
-		/* Type 1 configuration cycle.  */
-		*type1 = 1;
-		addr = (bus << 16) | (device_fn << 8) | (where);
-	}
-	*pci_addr = addr;
-	DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-/*
- * NOTE: both conf_read() and conf_write() may set HAE_3 when needing
- *       to do type1 access. This is protected by the use of spinlock IRQ
- *       primitives in the wrapper functions pci_{read,write}_config_*()
- *       defined in drivers/pci/pci.c.
- */
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned int value, cpu, taken;
-	unsigned long t2_cfg = 0;
-
-	cpu = smp_processor_id();
-
-	DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
-	/* If Type1 access, must set T2 CFG.  */
-	if (type1) {
-		t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
-		*(vulp)T2_HAE_3 = 0x40000000UL | t2_cfg;
-		mb();
-	}
-	mb();
-	draina();
-
-	mcheck_expected(cpu) = 1;
-	mcheck_taken(cpu) = 0;
-	t2_mcheck_any_expected |= (1 << cpu);
-	mb();
-
-	/* Access configuration space. */
-	value = *(vuip)addr;
-	mb();
-	mb();  /* magic */
-
-	/* Wait for possible mcheck. Also, this lets other CPUs clear
-	   their mchecks as well, as they can reliably tell when
-	   another CPU is in the midst of handling a real mcheck via
-	   the "taken" function. */
-	udelay(100);
-
-	if ((taken = mcheck_taken(cpu))) {
-		mcheck_taken(cpu) = 0;
-		t2_mcheck_last_taken |= (1 << cpu);
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(cpu) = 0;
-	t2_mcheck_any_expected = 0;
-	mb();
-
-	/* If Type1 access, must reset T2 CFG so normal IO space ops work.  */
-	if (type1) {
-		*(vulp)T2_HAE_3 = t2_cfg;
-		mb();
-	}
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned int cpu, taken;
-	unsigned long t2_cfg = 0;
-
-	cpu = smp_processor_id();
-
-	/* If Type1 access, must set T2 CFG.  */
-	if (type1) {
-		t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
-		*(vulp)T2_HAE_3 = t2_cfg | 0x40000000UL;
-		mb();
-	}
-	mb();
-	draina();
-
-	mcheck_expected(cpu) = 1;
-	mcheck_taken(cpu) = 0;
-	t2_mcheck_any_expected |= (1 << cpu);
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	mb();
-	mb();  /* magic */
-
-	/* Wait for possible mcheck. Also, this lets other CPUs clear
-	   their mchecks as well, as they can reliably tell when
-	   this CPU is in the midst of handling a real mcheck via
-	   the "taken" function. */
-	udelay(100);
-
-	if ((taken = mcheck_taken(cpu))) {
-		mcheck_taken(cpu) = 0;
-		t2_mcheck_last_taken |= (1 << cpu);
-		mb();
-	}
-	mcheck_expected(cpu) = 0;
-	t2_mcheck_any_expected = 0;
-	mb();
-
-	/* If Type1 access, must reset T2 CFG so normal IO space ops work.  */
-	if (type1) {
-		*(vulp)T2_HAE_3 = t2_cfg;
-		mb();
-	}
-}
-
-static int
-t2_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-	       int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	int shift;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + T2_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-t2_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		u32 value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + T2_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops t2_pci_ops = 
-{
-	.read =		t2_read_config,
-	.write =	t2_write_config,
-};
-
-static void __init
-t2_direct_map_window1(unsigned long base, unsigned long length)
-{
-	unsigned long temp;
-
-	__direct_map_base = base;
-	__direct_map_size = length;
-
-	temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
-	*(vulp)T2_WBASE1 = temp | 0x80000UL; /* OR in ENABLE bit */
-	temp = (length - 1) & 0xfff00000UL;
-	*(vulp)T2_WMASK1 = temp;
-	*(vulp)T2_TBASE1 = 0;
-
-#if DEBUG_PRINT_FINAL_SETTINGS
-	printk("%s: setting WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
-	       __func__, *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
-#endif
-}
-
-static void __init
-t2_sg_map_window2(struct pci_controller *hose,
-		  unsigned long base,
-		  unsigned long length)
-{
-	unsigned long temp;
-
-	/* Note we can only do 1 SG window, as the other is for direct, so
-	   do an ISA SG area, especially for the floppy. */
-	hose->sg_isa = iommu_arena_new(hose, base, length, 0);
-	hose->sg_pci = NULL;
-
-	temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
-	*(vulp)T2_WBASE2 = temp | 0xc0000UL; /* OR in ENABLE/SG bits */
-	temp = (length - 1) & 0xfff00000UL;
-	*(vulp)T2_WMASK2 = temp;
-	*(vulp)T2_TBASE2 = virt_to_phys(hose->sg_isa->ptes) >> 1;
-	mb();
-
-	t2_pci_tbi(hose, 0, -1); /* flush TLB all */
-
-#if DEBUG_PRINT_FINAL_SETTINGS
-	printk("%s: setting WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
-	       __func__, *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
-#endif
-}
-
-static void __init
-t2_save_configuration(void)
-{
-#if DEBUG_PRINT_INITIAL_SETTINGS
-	printk("%s: HAE_1 was 0x%lx\n", __func__, srm_hae); /* HW is 0 */
-	printk("%s: HAE_2 was 0x%lx\n", __func__, *(vulp)T2_HAE_2);
-	printk("%s: HAE_3 was 0x%lx\n", __func__, *(vulp)T2_HAE_3);
-	printk("%s: HAE_4 was 0x%lx\n", __func__, *(vulp)T2_HAE_4);
-	printk("%s: HBASE was 0x%lx\n", __func__, *(vulp)T2_HBASE);
-
-	printk("%s: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", __func__,
-	       *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
-	printk("%s: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", __func__,
-	       *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
-#endif
-
-	/*
-	 * Save the DMA Window registers.
-	 */
-	t2_saved_config.window[0].wbase = *(vulp)T2_WBASE1;
-	t2_saved_config.window[0].wmask = *(vulp)T2_WMASK1;
-	t2_saved_config.window[0].tbase = *(vulp)T2_TBASE1;
-	t2_saved_config.window[1].wbase = *(vulp)T2_WBASE2;
-	t2_saved_config.window[1].wmask = *(vulp)T2_WMASK2;
-	t2_saved_config.window[1].tbase = *(vulp)T2_TBASE2;
-
-	t2_saved_config.hae_1 = srm_hae; /* HW is already set to 0 */
-	t2_saved_config.hae_2 = *(vulp)T2_HAE_2;
-	t2_saved_config.hae_3 = *(vulp)T2_HAE_3;
-	t2_saved_config.hae_4 = *(vulp)T2_HAE_4;
-	t2_saved_config.hbase = *(vulp)T2_HBASE;
-}
-
-void __init
-t2_init_arch(void)
-{
-	struct pci_controller *hose;
-	struct resource *hae_mem;
-	unsigned long temp;
-	unsigned int i;
-
-	for (i = 0; i < NR_CPUS; i++) {
-		mcheck_expected(i) = 0;
-		mcheck_taken(i) = 0;
-	}
-	t2_mcheck_any_expected = 0;
-	t2_mcheck_last_taken = 0;
-
-	/* Enable scatter/gather TLB use.  */
-	temp = *(vulp)T2_IOCSR;
-	if (!(temp & (0x1UL << 26))) {
-		printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n",
-		       temp);
-		*(vulp)T2_IOCSR = temp | (0x1UL << 26);
-		mb();	
-		*(vulp)T2_IOCSR; /* read it back to make sure */
-	}
-
-	t2_save_configuration();
-
-	/*
-	 * Create our single hose.
-	 */
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hae_mem = alloc_resource();
-	hae_mem->start = 0;
-	hae_mem->end = T2_MEM_R1_MASK;
-	hae_mem->name = pci_hae0_name;
-	if (request_resource(&iomem_resource, hae_mem) < 0)
-		printk(KERN_ERR "Failed to request HAE_MEM\n");
-	hose->mem_space = hae_mem;
-	hose->index = 0;
-
-	hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = T2_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = T2_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI->physical memory translation windows.
-	 *
-	 * Window 1 is direct mapped.
-	 * Window 2 is scatter/gather (for ISA).
-	 */
-
-	t2_direct_map_window1(T2_DIRECTMAP_START, T2_DIRECTMAP_LENGTH);
-
-	/* Always make an ISA DMA window. */
-	t2_sg_map_window2(hose, T2_ISA_SG_START, T2_ISA_SG_LENGTH);
-
-	*(vulp)T2_HBASE = 0x0; /* Disable HOLES. */
-
-	/* Zero HAE.  */
-	*(vulp)T2_HAE_1 = 0; mb(); /* Sparse MEM HAE */
-	*(vulp)T2_HAE_2 = 0; mb(); /* Sparse I/O HAE */
-	*(vulp)T2_HAE_3 = 0; mb(); /* Config Space HAE */
-
-	/*
-	 * We also now zero out HAE_4, the dense memory HAE, so that
-	 * we need not account for its "offset" when accessing dense
-	 * memory resources which we allocated in our normal way. This
-	 * HAE would need to stay untouched were we to keep the SRM
-	 * resource settings.
-	 *
-	 * Thus we can now run standard X servers on SABLE/LYNX. :-)
-	 */
-	*(vulp)T2_HAE_4 = 0; mb();
-}
-
-void
-t2_kill_arch(int mode)
-{
-	/*
-	 * Restore the DMA Window registers.
-	 */
-	*(vulp)T2_WBASE1 = t2_saved_config.window[0].wbase;
-	*(vulp)T2_WMASK1 = t2_saved_config.window[0].wmask;
-	*(vulp)T2_TBASE1 = t2_saved_config.window[0].tbase;
-	*(vulp)T2_WBASE2 = t2_saved_config.window[1].wbase;
-	*(vulp)T2_WMASK2 = t2_saved_config.window[1].wmask;
-	*(vulp)T2_TBASE2 = t2_saved_config.window[1].tbase;
-	mb();
-
-	*(vulp)T2_HAE_1 = srm_hae;
-	*(vulp)T2_HAE_2 = t2_saved_config.hae_2;
-	*(vulp)T2_HAE_3 = t2_saved_config.hae_3;
-	*(vulp)T2_HAE_4 = t2_saved_config.hae_4;
-	*(vulp)T2_HBASE = t2_saved_config.hbase;
-	mb();
-	*(vulp)T2_HBASE; /* READ it back to ensure WRITE occurred. */
-}
-
-void
-t2_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	unsigned long t2_iocsr;
-
-	t2_iocsr = *(vulp)T2_IOCSR;
-
-	/* set the TLB Clear bit */
-	*(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 28);
-	mb();
-	*(vulp)T2_IOCSR; /* read it back to make sure */
-
-	/* clear the TLB Clear bit */
-	*(vulp)T2_IOCSR = t2_iocsr & ~(0x1UL << 28);
-	mb();
-	*(vulp)T2_IOCSR; /* read it back to make sure */
-}
-
-#define SIC_SEIC (1UL << 33)    /* System Event Clear */
-
-static void
-t2_clear_errors(int cpu)
-{
-	struct sable_cpu_csr *cpu_regs;
-
-	cpu_regs = (struct sable_cpu_csr *)T2_CPUn_BASE(cpu);
-		
-	cpu_regs->sic &= ~SIC_SEIC;
-
-	/* Clear CPU errors.  */
-	cpu_regs->bcce |= cpu_regs->bcce;
-	cpu_regs->cbe  |= cpu_regs->cbe;
-	cpu_regs->bcue |= cpu_regs->bcue;
-	cpu_regs->dter |= cpu_regs->dter;
-
-	*(vulp)T2_CERR1 |= *(vulp)T2_CERR1;
-	*(vulp)T2_PERR1 |= *(vulp)T2_PERR1;
-
-	mb();
-	mb();  /* magic */
-}
-
-/*
- * SABLE seems to have a "broadcast" style machine check, in that all
- * CPUs receive it. And, the issuing CPU, in the case of PCI Config
- * space read/write faults, will also receive a second mcheck, upon
- * lowering IPL during completion processing in pci_read_config_byte()
- * et al.
- *
- * Hence all the taken/expected/any_expected/last_taken stuff...
- */
-void
-t2_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	int cpu = smp_processor_id();
-#ifdef CONFIG_VERBOSE_MCHECK
-	struct el_common *mchk_header = (struct el_common *)la_ptr;
-#endif
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb();  /* magic */
-	draina();
-	t2_clear_errors(cpu);
-
-	/* This should not actually be done until the logout frame is
-	   examined, but, since we don't do that, go on and do this... */
-	wrmces(0x7);
-	mb();
-
-	/* Now, do testing for the anomalous conditions. */
-	if (!mcheck_expected(cpu) && t2_mcheck_any_expected) {
-		/*
-		 * FUNKY: Received mcheck on a CPU and not
-		 * expecting it, but another CPU is expecting one.
-		 *
-		 * Just dismiss it for now on this CPU...
-		 */
-#ifdef CONFIG_VERBOSE_MCHECK
-		if (alpha_verbose_mcheck > 1) {
-			printk("t2_machine_check(cpu%d): any_expected 0x%x -"
-			       " (assumed) spurious -"
-			       " code 0x%x\n", cpu, t2_mcheck_any_expected,
-			       (unsigned int)mchk_header->code);
-		}
-#endif
-		return;
-	}
-
-	if (!mcheck_expected(cpu) && !t2_mcheck_any_expected) {
-		if (t2_mcheck_last_taken & (1 << cpu)) {
-#ifdef CONFIG_VERBOSE_MCHECK
-		    if (alpha_verbose_mcheck > 1) {
-			printk("t2_machine_check(cpu%d): last_taken 0x%x - "
-			       "unexpected mcheck - code 0x%x\n",
-			       cpu, t2_mcheck_last_taken,
-			       (unsigned int)mchk_header->code);
-		    }
-#endif
-		    t2_mcheck_last_taken = 0;
-		    mb();
-		    return;
-		} else {
-			t2_mcheck_last_taken = 0;
-			mb();
-		}
-	}
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
-		       "any_expected 0x%x - code 0x%x\n",
-		       (mcheck_expected(cpu) ? "EX" : "UN"), cpu,
-		       t2_mcheck_last_taken, t2_mcheck_any_expected,
-		       (unsigned int)mchk_header->code);
-	}
-#endif
-
-	process_mcheck_info(vector, la_ptr, "T2", mcheck_expected(cpu));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_titan.c b/ANDROID_3.4.5/arch/alpha/kernel/core_titan.c
deleted file mode 100644
index 219bf271..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_titan.c
+++ /dev/null
@@ -1,798 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_titan.c
- *
- * Code common to all TITAN core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_titan.h>
-#undef __EXTERN_INLINE
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/bootmem.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/vga.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/* Save Titan configuration data as the console had it set up.  */
-
-struct
-{
-	unsigned long wsba[4];
-	unsigned long wsm[4];
-	unsigned long tba[4];
-} saved_config[4] __attribute__((common));
-
-/*
- * Is PChip 1 present? No need to query it more than once.
- */
-static int titan_pchip1_present;
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBG_CFG(args)	printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-
-/*
- * Routines to access TIG registers.
- */
-static inline volatile unsigned long *
-mk_tig_addr(int offset)
-{
-	return (volatile unsigned long *)(TITAN_TIG_SPACE + (offset << 6));
-}
-
-static inline u8 
-titan_read_tig(int offset, u8 value)
-{
-	volatile unsigned long *tig_addr = mk_tig_addr(offset);
-	return (u8)(*tig_addr & 0xff);
-}
-
-static inline void 
-titan_write_tig(int offset, u8 value)
-{
-	volatile unsigned long *tig_addr = mk_tig_addr(offset);
-	*tig_addr = (unsigned long)value;
-}
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Note that all config space accesses use Type 1 address format.
- *
- * Note also that type 1 is determined by non-zero bus number.
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
-		 "pci_addr=0x%p, type1=0x%p)\n",
-		 bus, device_fn, where, pci_addr, type1));
-
-	if (!pbus->parent) /* No parent means peer PCI bus. */
-		bus = 0;
-        *type1 = (bus != 0);
-
-        addr = (bus << 16) | (device_fn << 8) | where;
-	addr |= hose->config_space_base;
-		
-	*pci_addr = addr;
-	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static int
-titan_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		  int size, u32 *value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		*value = __kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		*value = __kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*value = *(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-titan_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		__kernel_stb(value, *(vucp)addr);
-		mb();
-		__kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		__kernel_stw(value, *(vusp)addr);
-		mb();
-		__kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*(vuip)addr = value;
-		mb();
-		*(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops titan_pci_ops = 
-{
-	.read =		titan_read_config,
-	.write =	titan_write_config,
-};
-
-
-void
-titan_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	titan_pachip *pachip = 
-	  (hose->index & 1) ? TITAN_pachip1 : TITAN_pachip0;
-	titan_pachip_port *port;
-	volatile unsigned long *csr;
-	unsigned long value;
-
-	/* Get the right hose.  */
-	port = &pachip->g_port;
-	if (hose->index & 2) 
-		port = &pachip->a_port;
-
-	/* We can invalidate up to 8 tlb entries in a go.  The flush
-	   matches against <31:16> in the pci address.  
-	   Note that gtlbi* and atlbi* are in the same place in the g_port
-	   and a_port, respectively, so the g_port offset can be used
-	   even if hose is an a_port */
-	csr = &port->port_specific.g.gtlbia.csr;
-	if (((start ^ end) & 0xffff0000) == 0)
-		csr = &port->port_specific.g.gtlbiv.csr;
-
-	/* For TBIA, it doesn't matter what value we write.  For TBI, 
-	   it's the shifted tag bits.  */
-	value = (start & 0xffff0000) >> 12;
-
-	wmb();
-	*csr = value;
-	mb();
-	*csr;
-}
-
-static int
-titan_query_agp(titan_pachip_port *port)
-{
-	union TPAchipPCTL pctl;
-
-	/* set up APCTL */
-	pctl.pctl_q_whole = port->pctl.csr;
-
-	return pctl.pctl_r_bits.apctl_v_agp_present;
-
-}
-
-static void __init
-titan_init_one_pachip_port(titan_pachip_port *port, int index)
-{
-	struct pci_controller *hose;
-
-	hose = alloc_pci_controller();
-	if (index == 0)
-		pci_isa_hose = hose;
-	hose->io_space = alloc_resource();
-	hose->mem_space = alloc_resource();
-
-	/*
-	 * This is for userland consumption.  The 40-bit PIO bias that we 
-	 * use in the kernel through KSEG doesn't work in the page table 
-	 * based user mappings. (43-bit KSEG sign extends the physical
-	 * address from bit 40 to hit the I/O bit - mapped addresses don't).
-	 * So make sure we get the 43-bit PIO bias.  
-	 */
-	hose->sparse_mem_base = 0;
-	hose->sparse_io_base = 0;
-	hose->dense_mem_base
-	  = (TITAN_MEM(index) & 0xffffffffffUL) | 0x80000000000UL;
-	hose->dense_io_base
-	  = (TITAN_IO(index) & 0xffffffffffUL) | 0x80000000000UL;
-
-	hose->config_space_base = TITAN_CONF(index);
-	hose->index = index;
-
-	hose->io_space->start = TITAN_IO(index) - TITAN_IO_BIAS;
-	hose->io_space->end = hose->io_space->start + TITAN_IO_SPACE - 1;
-	hose->io_space->name = pci_io_names[index];
-	hose->io_space->flags = IORESOURCE_IO;
-
-	hose->mem_space->start = TITAN_MEM(index) - TITAN_MEM_BIAS;
-	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
-	hose->mem_space->name = pci_mem_names[index];
-	hose->mem_space->flags = IORESOURCE_MEM;
-
-	if (request_resource(&ioport_resource, hose->io_space) < 0)
-		printk(KERN_ERR "Failed to request IO on hose %d\n", index);
-	if (request_resource(&iomem_resource, hose->mem_space) < 0)
-		printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
-
-	/*
-	 * Save the existing PCI window translations.  SRM will 
-	 * need them when we go to reboot.
-	 */
-	saved_config[index].wsba[0] = port->wsba[0].csr;
-	saved_config[index].wsm[0]  = port->wsm[0].csr;
-	saved_config[index].tba[0]  = port->tba[0].csr;
-
-	saved_config[index].wsba[1] = port->wsba[1].csr;
-	saved_config[index].wsm[1]  = port->wsm[1].csr;
-	saved_config[index].tba[1]  = port->tba[1].csr;
-
-	saved_config[index].wsba[2] = port->wsba[2].csr;
-	saved_config[index].wsm[2]  = port->wsm[2].csr;
-	saved_config[index].tba[2]  = port->tba[2].csr;
-
-	saved_config[index].wsba[3] = port->wsba[3].csr;
-	saved_config[index].wsm[3]  = port->wsm[3].csr;
-	saved_config[index].tba[3]  = port->tba[3].csr;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Note: Window 3 on Titan is Scatter-Gather ONLY.
-	 *
-	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
-	 * Window 1 is direct access 1GB at 2GB
-	 * Window 2 is scatter-gather 1GB at 3GB
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
-	hose->sg_isa->align_entry = 8; /* 64KB for ISA */
-
-	hose->sg_pci = iommu_arena_new(hose, 0xc0000000, 0x40000000, 0);
-	hose->sg_pci->align_entry = 4; /* Titan caches 4 PTEs at a time */
-
-	port->wsba[0].csr = hose->sg_isa->dma_base | 3;
-	port->wsm[0].csr  = (hose->sg_isa->size - 1) & 0xfff00000;
-	port->tba[0].csr  = virt_to_phys(hose->sg_isa->ptes);
-
-	port->wsba[1].csr = __direct_map_base | 1;
-	port->wsm[1].csr  = (__direct_map_size - 1) & 0xfff00000;
-	port->tba[1].csr  = 0;
-
-	port->wsba[2].csr = hose->sg_pci->dma_base | 3;
-	port->wsm[2].csr  = (hose->sg_pci->size - 1) & 0xfff00000;
-	port->tba[2].csr  = virt_to_phys(hose->sg_pci->ptes);
-
-	port->wsba[3].csr = 0;
-
-	/* Enable the Monster Window to make DAC pci64 possible.  */
-	port->pctl.csr |= pctl_m_mwin;
-
-	/*
-	 * If it's an AGP port, initialize agplastwr.
-	 */
-	if (titan_query_agp(port)) 
-		port->port_specific.a.agplastwr.csr = __direct_map_base;
-
-	titan_pci_tbi(hose, 0, -1);
-}
-
-static void __init
-titan_init_pachips(titan_pachip *pachip0, titan_pachip *pachip1)
-{
-	titan_pchip1_present = TITAN_cchip->csc.csr & 1L<<14;
-
-	/* Init the ports in hose order... */
-	titan_init_one_pachip_port(&pachip0->g_port, 0);	/* hose 0 */
-	if (titan_pchip1_present)
-		titan_init_one_pachip_port(&pachip1->g_port, 1);/* hose 1 */
-	titan_init_one_pachip_port(&pachip0->a_port, 2);	/* hose 2 */
-	if (titan_pchip1_present)
-		titan_init_one_pachip_port(&pachip1->a_port, 3);/* hose 3 */
-}
-
-void __init
-titan_init_arch(void)
-{
-#if 0
-	printk("%s: titan_init_arch()\n", __func__);
-	printk("%s: CChip registers:\n", __func__);
-	printk("%s: CSR_CSC 0x%lx\n", __func__, TITAN_cchip->csc.csr);
-	printk("%s: CSR_MTR 0x%lx\n", __func__, TITAN_cchip->mtr.csr);
-	printk("%s: CSR_MISC 0x%lx\n", __func__, TITAN_cchip->misc.csr);
-	printk("%s: CSR_DIM0 0x%lx\n", __func__, TITAN_cchip->dim0.csr);
-	printk("%s: CSR_DIM1 0x%lx\n", __func__, TITAN_cchip->dim1.csr);
-	printk("%s: CSR_DIR0 0x%lx\n", __func__, TITAN_cchip->dir0.csr);
-	printk("%s: CSR_DIR1 0x%lx\n", __func__, TITAN_cchip->dir1.csr);
-	printk("%s: CSR_DRIR 0x%lx\n", __func__, TITAN_cchip->drir.csr);
-
-	printk("%s: DChip registers:\n", __func__);
-	printk("%s: CSR_DSC 0x%lx\n", __func__, TITAN_dchip->dsc.csr);
-	printk("%s: CSR_STR 0x%lx\n", __func__, TITAN_dchip->str.csr);
-	printk("%s: CSR_DREV 0x%lx\n", __func__, TITAN_dchip->drev.csr);
-#endif
-
-	boot_cpuid = __hard_smp_processor_id();
-
-	/* With multiple PCI busses, we play with I/O as physical addrs.  */
-	ioport_resource.end = ~0UL;
-	iomem_resource.end = ~0UL;
-
-	/* PCI DMA Direct Mapping is 1GB at 2GB.  */
-	__direct_map_base = 0x80000000;
-	__direct_map_size = 0x40000000;
-
-	/* Init the PA chip(s).  */
-	titan_init_pachips(TITAN_pachip0, TITAN_pachip1);
-
-	/* Check for graphic console location (if any).  */
-	find_console_vga_hose();
-}
-
-static void
-titan_kill_one_pachip_port(titan_pachip_port *port, int index)
-{
-	port->wsba[0].csr = saved_config[index].wsba[0];
-	port->wsm[0].csr  = saved_config[index].wsm[0];
-	port->tba[0].csr  = saved_config[index].tba[0];
-
-	port->wsba[1].csr = saved_config[index].wsba[1];
-	port->wsm[1].csr  = saved_config[index].wsm[1];
-	port->tba[1].csr  = saved_config[index].tba[1];
-
-	port->wsba[2].csr = saved_config[index].wsba[2];
-	port->wsm[2].csr  = saved_config[index].wsm[2];
-	port->tba[2].csr  = saved_config[index].tba[2];
-
-	port->wsba[3].csr = saved_config[index].wsba[3];
-	port->wsm[3].csr  = saved_config[index].wsm[3];
-	port->tba[3].csr  = saved_config[index].tba[3];
-}
-
-static void
-titan_kill_pachips(titan_pachip *pachip0, titan_pachip *pachip1)
-{
-	if (titan_pchip1_present) {
-		titan_kill_one_pachip_port(&pachip1->g_port, 1);
-		titan_kill_one_pachip_port(&pachip1->a_port, 3);
-	}
-	titan_kill_one_pachip_port(&pachip0->g_port, 0);
-	titan_kill_one_pachip_port(&pachip0->a_port, 2);
-}
-
-void
-titan_kill_arch(int mode)
-{
-	titan_kill_pachips(TITAN_pachip0, TITAN_pachip1);
-}
-
-
-/*
- * IO map support.
- */
-
-void __iomem *
-titan_ioportmap(unsigned long addr)
-{
-	FIXUP_IOADDR_VGA(addr);
-	return (void __iomem *)(addr + TITAN_IO_BIAS);
-}
-
-
-void __iomem *
-titan_ioremap(unsigned long addr, unsigned long size)
-{
-	int h = (addr & TITAN_HOSE_MASK) >> TITAN_HOSE_SHIFT;
-	unsigned long baddr = addr & ~TITAN_HOSE_MASK;
-	unsigned long last = baddr + size - 1;
-	struct pci_controller *hose;	
-	struct vm_struct *area;
-	unsigned long vaddr;
-	unsigned long *ptes;
-	unsigned long pfn;
-
-	/*
-	 * Adjust the address and hose, if necessary.
-	 */ 
-	if (pci_vga_hose && __is_mem_vga(addr)) {
-		h = pci_vga_hose->index;
-		addr += pci_vga_hose->mem_space->start;
-	}
-
-	/*
-	 * Find the hose.
-	 */
-	for (hose = hose_head; hose; hose = hose->next)
-		if (hose->index == h)
-			break;
-	if (!hose)
-		return NULL;
-
-	/*
-	 * Is it direct-mapped?
-	 */
-	if ((baddr >= __direct_map_base) && 
-	    ((baddr + size - 1) < __direct_map_base + __direct_map_size)) {
-		vaddr = addr - __direct_map_base + TITAN_MEM_BIAS;
-		return (void __iomem *) vaddr;
-	}
-
-	/* 
-	 * Check the scatter-gather arena.
-	 */
-	if (hose->sg_pci &&
-	    baddr >= (unsigned long)hose->sg_pci->dma_base &&
-	    last < (unsigned long)hose->sg_pci->dma_base + hose->sg_pci->size){
-
-		/*
-		 * Adjust the limits (mappings must be page aligned)
-		 */
-		baddr -= hose->sg_pci->dma_base;
-		last -= hose->sg_pci->dma_base;
-		baddr &= PAGE_MASK;
-		size = PAGE_ALIGN(last) - baddr;
-
-		/*
-		 * Map it
-		 */
-		area = get_vm_area(size, VM_IOREMAP);
-		if (!area) {
-			printk("ioremap failed... no vm_area...\n");
-			return NULL;
-		}
-
-		ptes = hose->sg_pci->ptes;
-		for (vaddr = (unsigned long)area->addr; 
-		    baddr <= last; 
-		    baddr += PAGE_SIZE, vaddr += PAGE_SIZE) {
-			pfn = ptes[baddr >> PAGE_SHIFT];
-			if (!(pfn & 1)) {
-				printk("ioremap failed... pte not valid...\n");
-				vfree(area->addr);
-				return NULL;
-			}
-			pfn >>= 1;	/* make it a true pfn */
-			
-			if (__alpha_remap_area_pages(vaddr,
-						     pfn << PAGE_SHIFT, 
-						     PAGE_SIZE, 0)) {
-				printk("FAILED to remap_area_pages...\n");
-				vfree(area->addr);
-				return NULL;
-			}
-		}
-
-		flush_tlb_all();
-
-		vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
-		return (void __iomem *) vaddr;
-	}
-
-	/* Assume a legacy (read: VGA) address, and return appropriately. */
-	return (void __iomem *)(addr + TITAN_MEM_BIAS);
-}
-
-void
-titan_iounmap(volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr >= VMALLOC_START)
-		vfree((void *)(PAGE_MASK & addr)); 
-}
-
-int
-titan_is_mmio(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-
-	if (addr >= VMALLOC_START)
-		return 1;
-	else
-		return (addr & 0x100000000UL) == 0;
-}
-
-#ifndef CONFIG_ALPHA_GENERIC
-EXPORT_SYMBOL(titan_ioportmap);
-EXPORT_SYMBOL(titan_ioremap);
-EXPORT_SYMBOL(titan_iounmap);
-EXPORT_SYMBOL(titan_is_mmio);
-#endif
-
-/*
- * AGP GART Support.
- */
-#include <linux/agp_backend.h>
-#include <asm/agp_backend.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-struct titan_agp_aperture {
-	struct pci_iommu_arena *arena;
-	long pg_start;
-	long pg_count;
-};
-
-static int
-titan_agp_setup(alpha_agp_info *agp)
-{
-	struct titan_agp_aperture *aper;
-
-	if (!alpha_agpgart_size)
-		return -ENOMEM;
-
-	aper = kmalloc(sizeof(struct titan_agp_aperture), GFP_KERNEL);
-	if (aper == NULL)
-		return -ENOMEM;
-
-	aper->arena = agp->hose->sg_pci;
-	aper->pg_count = alpha_agpgart_size / PAGE_SIZE;
-	aper->pg_start = iommu_reserve(aper->arena, aper->pg_count,
-				       aper->pg_count - 1);
-	if (aper->pg_start < 0) {
-		printk(KERN_ERR "Failed to reserve AGP memory\n");
-		kfree(aper);
-		return -ENOMEM;
-	}
-
-	agp->aperture.bus_base = 
-		aper->arena->dma_base + aper->pg_start * PAGE_SIZE;
-	agp->aperture.size = aper->pg_count * PAGE_SIZE;
-	agp->aperture.sysdata = aper;
-
-	return 0;
-}
-
-static void
-titan_agp_cleanup(alpha_agp_info *agp)
-{
-	struct titan_agp_aperture *aper = agp->aperture.sysdata;
-	int status;
-
-	status = iommu_release(aper->arena, aper->pg_start, aper->pg_count);
-	if (status == -EBUSY) {
-		printk(KERN_WARNING 
-		       "Attempted to release bound AGP memory - unbinding\n");
-		iommu_unbind(aper->arena, aper->pg_start, aper->pg_count);
-		status = iommu_release(aper->arena, aper->pg_start, 
-				       aper->pg_count);
-	}
-	if (status < 0)
-		printk(KERN_ERR "Failed to release AGP memory\n");
-
-	kfree(aper);
-	kfree(agp);
-}
-
-static int
-titan_agp_configure(alpha_agp_info *agp)
-{
-	union TPAchipPCTL pctl;
-	titan_pachip_port *port = agp->private;
-	pctl.pctl_q_whole = port->pctl.csr;
-
-	/* Side-Band Addressing? */
-	pctl.pctl_r_bits.apctl_v_agp_sba_en = agp->mode.bits.sba;
-
-	/* AGP Rate? */
-	pctl.pctl_r_bits.apctl_v_agp_rate = 0;		/* 1x */
-	if (agp->mode.bits.rate & 2) 
-		pctl.pctl_r_bits.apctl_v_agp_rate = 1;	/* 2x */
-#if 0
-	if (agp->mode.bits.rate & 4) 
-		pctl.pctl_r_bits.apctl_v_agp_rate = 2;	/* 4x */
-#endif
-	
-	/* RQ Depth? */
-	pctl.pctl_r_bits.apctl_v_agp_hp_rd = 2;
-	pctl.pctl_r_bits.apctl_v_agp_lp_rd = 7;
-
-	/*
-	 * AGP Enable.
-	 */
-	pctl.pctl_r_bits.apctl_v_agp_en = agp->mode.bits.enable;
-
-	/* Tell the user.  */
-	printk("Enabling AGP: %dX%s\n", 
-	       1 << pctl.pctl_r_bits.apctl_v_agp_rate,
-	       pctl.pctl_r_bits.apctl_v_agp_sba_en ? " - SBA" : "");
-	       
-	/* Write it.  */
-	port->pctl.csr = pctl.pctl_q_whole;
-	
-	/* And wait at least 5000 66MHz cycles (per Titan spec).  */
-	udelay(100);
-
-	return 0;
-}
-
-static int 
-titan_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
-{
-	struct titan_agp_aperture *aper = agp->aperture.sysdata;
-	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
-			  mem->page_count, mem->pages);
-}
-
-static int 
-titan_agp_unbind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
-{
-	struct titan_agp_aperture *aper = agp->aperture.sysdata;
-	return iommu_unbind(aper->arena, aper->pg_start + pg_start,
-			    mem->page_count);
-}
-
-static unsigned long
-titan_agp_translate(alpha_agp_info *agp, dma_addr_t addr)
-{
-	struct titan_agp_aperture *aper = agp->aperture.sysdata;
-	unsigned long baddr = addr - aper->arena->dma_base;
-	unsigned long pte;
-
-	if (addr < agp->aperture.bus_base ||
-	    addr >= agp->aperture.bus_base + agp->aperture.size) {
-		printk("%s: addr out of range\n", __func__);
-		return -EINVAL;
-	}
-
-	pte = aper->arena->ptes[baddr >> PAGE_SHIFT];
-	if (!(pte & 1)) {
-		printk("%s: pte not valid\n", __func__);
-		return -EINVAL;
-	}
-
-	return (pte >> 1) << PAGE_SHIFT;
-}
-
-struct alpha_agp_ops titan_agp_ops =
-{
-	.setup		= titan_agp_setup,
-	.cleanup	= titan_agp_cleanup,
-	.configure	= titan_agp_configure,
-	.bind		= titan_agp_bind_memory,
-	.unbind		= titan_agp_unbind_memory,
-	.translate	= titan_agp_translate
-};
-
-alpha_agp_info *
-titan_agp_info(void)
-{
-	alpha_agp_info *agp;
-	struct pci_controller *hose;
-	titan_pachip_port *port;
-	int hosenum = -1;
-	union TPAchipPCTL pctl;
-
-	/*
-	 * Find the AGP port.
-	 */
-	port = &TITAN_pachip0->a_port;
-	if (titan_query_agp(port))
-		hosenum = 2;
-	if (hosenum < 0 && 
-	    titan_pchip1_present &&
-	    titan_query_agp(port = &TITAN_pachip1->a_port)) 
-		hosenum = 3;
-	
-	/*
-	 * Find the hose the port is on.
-	 */
-	for (hose = hose_head; hose; hose = hose->next)
-		if (hose->index == hosenum)
-			break;
-
-	if (!hose || !hose->sg_pci)
-		return NULL;
-
-	/*
-	 * Allocate the info structure.
-	 */
-	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
-	if (!agp)
-		return NULL;
-
-	/*
-	 * Fill it in.
-	 */
-	agp->hose = hose;
-	agp->private = port;
-	agp->ops = &titan_agp_ops;
-
-	/*
-	 * Aperture - not configured until ops.setup().
-	 *
-	 * FIXME - should we go ahead and allocate it here?
-	 */
-	agp->aperture.bus_base = 0;
-	agp->aperture.size = 0;
-	agp->aperture.sysdata = NULL;
-
-	/*
-	 * Capabilities.
-	 */
-	agp->capability.lw = 0;
-	agp->capability.bits.rate = 3; 	/* 2x, 1x */
-	agp->capability.bits.sba = 1;
-	agp->capability.bits.rq = 7;	/* 8 - 1 */
-
-	/*
-	 * Mode.
-	 */
-	pctl.pctl_q_whole = port->pctl.csr;
-	agp->mode.lw = 0;
-	agp->mode.bits.rate = 1 << pctl.pctl_r_bits.apctl_v_agp_rate;
-	agp->mode.bits.sba = pctl.pctl_r_bits.apctl_v_agp_sba_en;
-	agp->mode.bits.rq = 7;	/* RQ Depth? */
-	agp->mode.bits.enable = pctl.pctl_r_bits.apctl_v_agp_en;
-
-	return agp;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_tsunami.c b/ANDROID_3.4.5/arch/alpha/kernel/core_tsunami.c
deleted file mode 100644
index 61893d7b..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_tsunami.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/core_tsunami.c
- *
- * Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com).
- *
- * Code common to all TSUNAMI core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_tsunami.h>
-#undef __EXTERN_INLINE
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/* Save Tsunami configuration data as the console had it set up.  */
-
-struct 
-{
-	unsigned long wsba[4];
-	unsigned long wsm[4];
-	unsigned long tba[4];
-} saved_config[2] __attribute__((common));
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the I/O controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBG_CFG(args)	printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Note that all config space accesses use Type 1 address format.
- *
- * Note also that type 1 is determined by non-zero bus number.
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
-		 "pci_addr=0x%p, type1=0x%p)\n",
-		 bus, device_fn, where, pci_addr, type1));
-	
-	if (!pbus->parent) /* No parent means peer PCI bus. */
-		bus = 0;
-	*type1 = (bus != 0);
-
-	addr = (bus << 16) | (device_fn << 8) | where;
-	addr |= hose->config_space_base;
-		
-	*pci_addr = addr;
-	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static int 
-tsunami_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 *value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		*value = __kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		*value = __kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*value = *(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-tsunami_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		__kernel_stb(value, *(vucp)addr);
-		mb();
-		__kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		__kernel_stw(value, *(vusp)addr);
-		mb();
-		__kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*(vuip)addr = value;
-		mb();
-		*(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops tsunami_pci_ops = 
-{
-	.read =		tsunami_read_config,
-	.write = 	tsunami_write_config,
-};
-
-void
-tsunami_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	tsunami_pchip *pchip = hose->index ? TSUNAMI_pchip1 : TSUNAMI_pchip0;
-	volatile unsigned long *csr;
-	unsigned long value;
-
-	/* We can invalidate up to 8 tlb entries in a go.  The flush
-	   matches against <31:16> in the pci address.  */
-	csr = &pchip->tlbia.csr;
-	if (((start ^ end) & 0xffff0000) == 0)
-		csr = &pchip->tlbiv.csr;
-
-	/* For TBIA, it doesn't matter what value we write.  For TBI, 
-	   it's the shifted tag bits.  */
-	value = (start & 0xffff0000) >> 12;
-
-	*csr = value;
-	mb();
-	*csr;
-}
-
-#ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI
-static long __init
-tsunami_probe_read(volatile unsigned long *vaddr)
-{
-	long dont_care, probe_result;
-	int cpu = smp_processor_id();
-	int s = swpipl(IPL_MCHECK - 1);
-
-	mcheck_taken(cpu) = 0;
-	mcheck_expected(cpu) = 1;
-	mb();
-	dont_care = *vaddr;
-	draina();
-	mcheck_expected(cpu) = 0;
-	probe_result = !mcheck_taken(cpu);
-	mcheck_taken(cpu) = 0;
-	setipl(s);
-
-	printk("dont_care == 0x%lx\n", dont_care);
-
-	return probe_result;
-}
-
-static long __init
-tsunami_probe_write(volatile unsigned long *vaddr)
-{
-	long true_contents, probe_result = 1;
-
-	TSUNAMI_cchip->misc.csr |= (1L << 28); /* clear NXM... */
-	true_contents = *vaddr;
-	*vaddr = 0;
-	draina();
-	if (TSUNAMI_cchip->misc.csr & (1L << 28)) {
-		int source = (TSUNAMI_cchip->misc.csr >> 29) & 7;
-		TSUNAMI_cchip->misc.csr |= (1L << 28); /* ...and unlock NXS. */
-		probe_result = 0;
-		printk("tsunami_probe_write: unit %d at 0x%016lx\n", source,
-		       (unsigned long)vaddr);
-	}
-	if (probe_result)
-		*vaddr = true_contents;
-	return probe_result;
-}
-#else
-#define tsunami_probe_read(ADDR) 1
-#endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */
-
-static void __init
-tsunami_init_one_pchip(tsunami_pchip *pchip, int index)
-{
-	struct pci_controller *hose;
-
-	if (tsunami_probe_read(&pchip->pctl.csr) == 0)
-		return;
-
-	hose = alloc_pci_controller();
-	if (index == 0)
-		pci_isa_hose = hose;
-	hose->io_space = alloc_resource();
-	hose->mem_space = alloc_resource();
-
-	/* This is for userland consumption.  For some reason, the 40-bit
-	   PIO bias that we use in the kernel through KSEG didn't work for
-	   the page table based user mappings.  So make sure we get the
-	   43-bit PIO bias.  */
-	hose->sparse_mem_base = 0;
-	hose->sparse_io_base = 0;
-	hose->dense_mem_base
-	  = (TSUNAMI_MEM(index) & 0xffffffffffL) | 0x80000000000L;
-	hose->dense_io_base
-	  = (TSUNAMI_IO(index) & 0xffffffffffL) | 0x80000000000L;
-
-	hose->config_space_base = TSUNAMI_CONF(index);
-	hose->index = index;
-
-	hose->io_space->start = TSUNAMI_IO(index) - TSUNAMI_IO_BIAS;
-	hose->io_space->end = hose->io_space->start + TSUNAMI_IO_SPACE - 1;
-	hose->io_space->name = pci_io_names[index];
-	hose->io_space->flags = IORESOURCE_IO;
-
-	hose->mem_space->start = TSUNAMI_MEM(index) - TSUNAMI_MEM_BIAS;
-	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
-	hose->mem_space->name = pci_mem_names[index];
-	hose->mem_space->flags = IORESOURCE_MEM;
-
-	if (request_resource(&ioport_resource, hose->io_space) < 0)
-		printk(KERN_ERR "Failed to request IO on hose %d\n", index);
-	if (request_resource(&iomem_resource, hose->mem_space) < 0)
-		printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
-
-	/*
-	 * Save the existing PCI window translations.  SRM will 
-	 * need them when we go to reboot.
-	 */
-
-	saved_config[index].wsba[0] = pchip->wsba[0].csr;
-	saved_config[index].wsm[0] = pchip->wsm[0].csr;
-	saved_config[index].tba[0] = pchip->tba[0].csr;
-
-	saved_config[index].wsba[1] = pchip->wsba[1].csr;
-	saved_config[index].wsm[1] = pchip->wsm[1].csr;
-	saved_config[index].tba[1] = pchip->tba[1].csr;
-
-	saved_config[index].wsba[2] = pchip->wsba[2].csr;
-	saved_config[index].wsm[2] = pchip->wsm[2].csr;
-	saved_config[index].tba[2] = pchip->tba[2].csr;
-
-	saved_config[index].wsba[3] = pchip->wsba[3].csr;
-	saved_config[index].wsm[3] = pchip->wsm[3].csr;
-	saved_config[index].tba[3] = pchip->tba[3].csr;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Note: Window 3 is scatter-gather only
-	 * 
-	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
-	 * Window 1 is scatter-gather (up to) 1GB at 1GB
-	 * Window 2 is direct access 2GB at 2GB
-	 *
-	 * NOTE: we need the align_entry settings for Acer devices on ES40,
-	 * specifically floppy and IDE when memory is larger than 2GB.
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
-	/* Initially set for 4 PTEs, but will be overridden to 64K for ISA. */
-        hose->sg_isa->align_entry = 4;
-
-	hose->sg_pci = iommu_arena_new(hose, 0x40000000,
-				       size_for_memory(0x40000000), 0);
-        hose->sg_pci->align_entry = 4; /* Tsunami caches 4 PTEs at a time */
-
-	__direct_map_base = 0x80000000;
-	__direct_map_size = 0x80000000;
-
-	pchip->wsba[0].csr = hose->sg_isa->dma_base | 3;
-	pchip->wsm[0].csr  = (hose->sg_isa->size - 1) & 0xfff00000;
-	pchip->tba[0].csr  = virt_to_phys(hose->sg_isa->ptes);
-
-	pchip->wsba[1].csr = hose->sg_pci->dma_base | 3;
-	pchip->wsm[1].csr  = (hose->sg_pci->size - 1) & 0xfff00000;
-	pchip->tba[1].csr  = virt_to_phys(hose->sg_pci->ptes);
-
-	pchip->wsba[2].csr = 0x80000000 | 1;
-	pchip->wsm[2].csr  = (0x80000000 - 1) & 0xfff00000;
-	pchip->tba[2].csr  = 0;
-
-	pchip->wsba[3].csr = 0;
-
-	/* Enable the Monster Window to make DAC pci64 possible. */
-	pchip->pctl.csr |= pctl_m_mwin;
-
-	tsunami_pci_tbi(hose, 0, -1);
-}
-
-
-void __iomem *
-tsunami_ioportmap(unsigned long addr)
-{
-	FIXUP_IOADDR_VGA(addr);
-	return (void __iomem *)(addr + TSUNAMI_IO_BIAS);
-}
-
-void __iomem *
-tsunami_ioremap(unsigned long addr, unsigned long size)
-{
-	FIXUP_MEMADDR_VGA(addr);
-	return (void __iomem *)(addr + TSUNAMI_MEM_BIAS);
-}
-
-#ifndef CONFIG_ALPHA_GENERIC
-EXPORT_SYMBOL(tsunami_ioportmap);
-EXPORT_SYMBOL(tsunami_ioremap);
-#endif
-
-void __init
-tsunami_init_arch(void)
-{
-#ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI
-	unsigned long tmp;
-	
-	/* Ho hum.. init_arch is called before init_IRQ, but we need to be
-	   able to handle machine checks.  So install the handler now.  */
-	wrent(entInt, 0);
-
-	/* NXMs just don't matter to Tsunami--unless they make it
-	   choke completely. */
-	tmp = (unsigned long)(TSUNAMI_cchip - 1);
-	printk("%s: probing bogus address:  0x%016lx\n", __func__, bogus_addr);
-	printk("\tprobe %s\n",
-	       tsunami_probe_write((unsigned long *)bogus_addr)
-	       ? "succeeded" : "failed");
-#endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */
-
-#if 0
-	printk("%s: CChip registers:\n", __func__);
-	printk("%s: CSR_CSC 0x%lx\n", __func__, TSUNAMI_cchip->csc.csr);
-	printk("%s: CSR_MTR 0x%lx\n", __func__, TSUNAMI_cchip.mtr.csr);
-	printk("%s: CSR_MISC 0x%lx\n", __func__, TSUNAMI_cchip->misc.csr);
-	printk("%s: CSR_DIM0 0x%lx\n", __func__, TSUNAMI_cchip->dim0.csr);
-	printk("%s: CSR_DIM1 0x%lx\n", __func__, TSUNAMI_cchip->dim1.csr);
-	printk("%s: CSR_DIR0 0x%lx\n", __func__, TSUNAMI_cchip->dir0.csr);
-	printk("%s: CSR_DIR1 0x%lx\n", __func__, TSUNAMI_cchip->dir1.csr);
-	printk("%s: CSR_DRIR 0x%lx\n", __func__, TSUNAMI_cchip->drir.csr);
-
-	printk("%s: DChip registers:\n");
-	printk("%s: CSR_DSC 0x%lx\n", __func__, TSUNAMI_dchip->dsc.csr);
-	printk("%s: CSR_STR 0x%lx\n", __func__, TSUNAMI_dchip->str.csr);
-	printk("%s: CSR_DREV 0x%lx\n", __func__, TSUNAMI_dchip->drev.csr);
-#endif
-	/* With multiple PCI busses, we play with I/O as physical addrs.  */
-	ioport_resource.end = ~0UL;
-
-	/* Find how many hoses we have, and initialize them.  TSUNAMI
-	   and TYPHOON can have 2, but might only have 1 (DS10).  */
-
-	tsunami_init_one_pchip(TSUNAMI_pchip0, 0);
-	if (TSUNAMI_cchip->csc.csr & 1L<<14)
-		tsunami_init_one_pchip(TSUNAMI_pchip1, 1);
-
-	/* Check for graphic console location (if any).  */
-	find_console_vga_hose();
-}
-
-static void
-tsunami_kill_one_pchip(tsunami_pchip *pchip, int index)
-{
-	pchip->wsba[0].csr = saved_config[index].wsba[0];
-	pchip->wsm[0].csr = saved_config[index].wsm[0];
-	pchip->tba[0].csr = saved_config[index].tba[0];
-
-	pchip->wsba[1].csr = saved_config[index].wsba[1];
-	pchip->wsm[1].csr = saved_config[index].wsm[1];
-	pchip->tba[1].csr = saved_config[index].tba[1];
-
-	pchip->wsba[2].csr = saved_config[index].wsba[2];
-	pchip->wsm[2].csr = saved_config[index].wsm[2];
-	pchip->tba[2].csr = saved_config[index].tba[2];
-
-	pchip->wsba[3].csr = saved_config[index].wsba[3];
-	pchip->wsm[3].csr = saved_config[index].wsm[3];
-	pchip->tba[3].csr = saved_config[index].tba[3];
-}
-
-void
-tsunami_kill_arch(int mode)
-{
-	tsunami_kill_one_pchip(TSUNAMI_pchip0, 0);
-	if (TSUNAMI_cchip->csc.csr & 1L<<14)
-		tsunami_kill_one_pchip(TSUNAMI_pchip1, 1);
-}
-
-static inline void
-tsunami_pci_clr_err_1(tsunami_pchip *pchip)
-{
-	pchip->perror.csr;
-	pchip->perror.csr = 0x040;
-	mb();
-	pchip->perror.csr;
-}
-
-static inline void
-tsunami_pci_clr_err(void)
-{
-	tsunami_pci_clr_err_1(TSUNAMI_pchip0);
-
-	/* TSUNAMI and TYPHOON can have 2, but might only have 1 (DS10) */
-	if (TSUNAMI_cchip->csc.csr & 1L<<14)
-		tsunami_pci_clr_err_1(TSUNAMI_pchip1);
-}
-
-void
-tsunami_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	/* Clear error before any reporting.  */
-	mb();
-	mb();  /* magic */
-	draina();
-	tsunami_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "TSUNAMI",
-			    mcheck_expected(smp_processor_id()));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/core_wildfire.c b/ANDROID_3.4.5/arch/alpha/kernel/core_wildfire.c
deleted file mode 100644
index 7e072443..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/core_wildfire.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/core_wildfire.c
- *
- *  Wildfire support.
- *
- *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_wildfire.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-#define DEBUG_CONFIG 0
-#define DEBUG_DUMP_REGS 0
-#define DEBUG_DUMP_CONFIG 1
-
-#if DEBUG_CONFIG
-# define DBG_CFG(args)	printk args
-#else
-# define DBG_CFG(args)
-#endif
-
-#if DEBUG_DUMP_REGS
-static void wildfire_dump_pci_regs(int qbbno, int hoseno);
-static void wildfire_dump_pca_regs(int qbbno, int pcano);
-static void wildfire_dump_qsa_regs(int qbbno);
-static void wildfire_dump_qsd_regs(int qbbno);
-static void wildfire_dump_iop_regs(int qbbno);
-static void wildfire_dump_gp_regs(int qbbno);
-#endif
-#if DEBUG_DUMP_CONFIG
-static void wildfire_dump_hardware_config(void);
-#endif
-
-unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB];
-unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB];
-#define QBB_MAP_EMPTY	0xff
-
-unsigned long wildfire_hard_qbb_mask;
-unsigned long wildfire_soft_qbb_mask;
-unsigned long wildfire_gp_mask;
-unsigned long wildfire_hs_mask;
-unsigned long wildfire_iop_mask;
-unsigned long wildfire_ior_mask;
-unsigned long wildfire_pca_mask;
-unsigned long wildfire_cpu_mask;
-unsigned long wildfire_mem_mask;
-
-void __init
-wildfire_init_hose(int qbbno, int hoseno)
-{
-	struct pci_controller *hose;
-	wildfire_pci *pci;
-
-	hose = alloc_pci_controller();
-	hose->io_space = alloc_resource();
-	hose->mem_space = alloc_resource();
-
-        /* This is for userland consumption. */
-        hose->sparse_mem_base = 0;
-        hose->sparse_io_base  = 0;
-        hose->dense_mem_base  = WILDFIRE_MEM(qbbno, hoseno);
-        hose->dense_io_base   = WILDFIRE_IO(qbbno, hoseno);
-
-	hose->config_space_base = WILDFIRE_CONF(qbbno, hoseno);
-	hose->index = (qbbno << 3) + hoseno;
-
-	hose->io_space->start = WILDFIRE_IO(qbbno, hoseno) - WILDFIRE_IO_BIAS;
-	hose->io_space->end = hose->io_space->start + WILDFIRE_IO_SPACE - 1;
-	hose->io_space->name = pci_io_names[hoseno];
-	hose->io_space->flags = IORESOURCE_IO;
-
-	hose->mem_space->start = WILDFIRE_MEM(qbbno, hoseno)-WILDFIRE_MEM_BIAS;
-	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
-	hose->mem_space->name = pci_mem_names[hoseno];
-	hose->mem_space->flags = IORESOURCE_MEM;
-
-	if (request_resource(&ioport_resource, hose->io_space) < 0)
-		printk(KERN_ERR "Failed to request IO on qbb %d hose %d\n",
-		       qbbno, hoseno);
-	if (request_resource(&iomem_resource, hose->mem_space) < 0)
-		printk(KERN_ERR "Failed to request MEM on qbb %d hose %d\n",
-		       qbbno, hoseno);
-
-#if DEBUG_DUMP_REGS
-	wildfire_dump_pci_regs(qbbno, hoseno);
-#endif
-
-        /*
-         * Set up the PCI to main memory translation windows.
-         *
-         * Note: Window 3 is scatter-gather only
-         * 
-         * Window 0 is scatter-gather 8MB at 8MB (for isa)
-	 * Window 1 is direct access 1GB at 1GB
-	 * Window 2 is direct access 1GB at 2GB
-         * Window 3 is scatter-gather 128MB at 3GB
-         * ??? We ought to scale window 3 memory.
-         *
-         */
-        hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
-        hose->sg_pci = iommu_arena_new(hose, 0xc0000000, 0x08000000, 0);
-
-	pci = WILDFIRE_pci(qbbno, hoseno);
-
-	pci->pci_window[0].wbase.csr = hose->sg_isa->dma_base | 3;
-	pci->pci_window[0].wmask.csr = (hose->sg_isa->size - 1) & 0xfff00000;
-	pci->pci_window[0].tbase.csr = virt_to_phys(hose->sg_isa->ptes);
-
-	pci->pci_window[1].wbase.csr = 0x40000000 | 1;
-	pci->pci_window[1].wmask.csr = (0x40000000 -1) & 0xfff00000;
-	pci->pci_window[1].tbase.csr = 0;
-
-	pci->pci_window[2].wbase.csr = 0x80000000 | 1;
-	pci->pci_window[2].wmask.csr = (0x40000000 -1) & 0xfff00000;
-	pci->pci_window[2].tbase.csr = 0x40000000;
-
-	pci->pci_window[3].wbase.csr = hose->sg_pci->dma_base | 3;
-	pci->pci_window[3].wmask.csr = (hose->sg_pci->size - 1) & 0xfff00000;
-	pci->pci_window[3].tbase.csr = virt_to_phys(hose->sg_pci->ptes);
-
-	wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
-}
-
-void __init
-wildfire_init_pca(int qbbno, int pcano)
-{
-
-	/* Test for PCA existence first. */
-	if (!WILDFIRE_PCA_EXISTS(qbbno, pcano))
-	    return;
-
-#if DEBUG_DUMP_REGS
-	wildfire_dump_pca_regs(qbbno, pcano);
-#endif
-
-	/* Do both hoses of the PCA. */
-	wildfire_init_hose(qbbno, (pcano << 1) + 0);
-	wildfire_init_hose(qbbno, (pcano << 1) + 1);
-}
-
-void __init
-wildfire_init_qbb(int qbbno)
-{
-	int pcano;
-
-	/* Test for QBB existence first. */
-	if (!WILDFIRE_QBB_EXISTS(qbbno))
-		return;
-
-#if DEBUG_DUMP_REGS
-	wildfire_dump_qsa_regs(qbbno);
-	wildfire_dump_qsd_regs(qbbno);
-	wildfire_dump_iop_regs(qbbno);
-	wildfire_dump_gp_regs(qbbno);
-#endif
-
-	/* Init all PCAs here. */
-	for (pcano = 0; pcano < WILDFIRE_PCA_PER_QBB; pcano++) {
-		wildfire_init_pca(qbbno, pcano);
-	}
-}
-
-void __init
-wildfire_hardware_probe(void)
-{
-	unsigned long temp;
-	unsigned int hard_qbb, soft_qbb;
-	wildfire_fast_qsd *fast = WILDFIRE_fast_qsd();
-	wildfire_qsd *qsd;
-	wildfire_qsa *qsa;
-	wildfire_iop *iop;
-	wildfire_gp *gp;
-	wildfire_ne *ne;
-	wildfire_fe *fe;
-	int i;
-
-	temp = fast->qsd_whami.csr;
-#if 0
-	printk(KERN_ERR "fast QSD_WHAMI at base %p is 0x%lx\n", fast, temp);
-#endif
-
-	hard_qbb = (temp >> 8) & 7;
-	soft_qbb = (temp >> 4) & 7;
-
-	/* Init the HW configuration variables. */
-	wildfire_hard_qbb_mask = (1 << hard_qbb);
-	wildfire_soft_qbb_mask = (1 << soft_qbb);
-
-	wildfire_gp_mask = 0;
-	wildfire_hs_mask = 0;
-	wildfire_iop_mask = 0;
-	wildfire_ior_mask = 0;
-	wildfire_pca_mask = 0;
-
-	wildfire_cpu_mask = 0;
-	wildfire_mem_mask = 0;
-
-	memset(wildfire_hard_qbb_map, QBB_MAP_EMPTY, WILDFIRE_MAX_QBB);
-	memset(wildfire_soft_qbb_map, QBB_MAP_EMPTY, WILDFIRE_MAX_QBB);
-
-	/* First, determine which QBBs are present. */
-	qsa = WILDFIRE_qsa(soft_qbb);
-
-	temp = qsa->qsa_qbb_id.csr;
-#if 0
-	printk(KERN_ERR "QSA_QBB_ID at base %p is 0x%lx\n", qsa, temp);
-#endif
-
-	if (temp & 0x40) /* Is there an HS? */
-		wildfire_hs_mask = 1;
-
-	if (temp & 0x20) { /* Is there a GP? */
-		gp = WILDFIRE_gp(soft_qbb);
-		temp = 0;
-		for (i = 0; i < 4; i++) {
-			temp |= gp->gpa_qbb_map[i].csr << (i * 8);
-#if 0
-			printk(KERN_ERR "GPA_QBB_MAP[%d] at base %p is 0x%lx\n",
-			       i, gp, temp);
-#endif
-		}
-
-		for (hard_qbb = 0; hard_qbb < WILDFIRE_MAX_QBB; hard_qbb++) {
-			if (temp & 8) { /* Is there a QBB? */
-				soft_qbb = temp & 7;
-				wildfire_hard_qbb_mask |= (1 << hard_qbb);
-				wildfire_soft_qbb_mask |= (1 << soft_qbb);
-			}
-			temp >>= 4;
-		}
-		wildfire_gp_mask = wildfire_soft_qbb_mask;
-        }
-
-	/* Next determine each QBBs resources. */
-	for (soft_qbb = 0; soft_qbb < WILDFIRE_MAX_QBB; soft_qbb++) {
-	    if (WILDFIRE_QBB_EXISTS(soft_qbb)) {
-	        qsd = WILDFIRE_qsd(soft_qbb);
-		temp = qsd->qsd_whami.csr;
-#if 0
-	printk(KERN_ERR "QSD_WHAMI at base %p is 0x%lx\n", qsd, temp);
-#endif
-		hard_qbb = (temp >> 8) & 7;
-		wildfire_hard_qbb_map[hard_qbb] = soft_qbb;
-		wildfire_soft_qbb_map[soft_qbb] = hard_qbb;
-
-		qsa = WILDFIRE_qsa(soft_qbb);
-		temp = qsa->qsa_qbb_pop[0].csr;
-#if 0
-	printk(KERN_ERR "QSA_QBB_POP_0 at base %p is 0x%lx\n", qsa, temp);
-#endif
-		wildfire_cpu_mask |= ((temp >> 0) & 0xf) << (soft_qbb << 2);
-		wildfire_mem_mask |= ((temp >> 4) & 0xf) << (soft_qbb << 2);
-
-		temp = qsa->qsa_qbb_pop[1].csr;
-#if 0
-	printk(KERN_ERR "QSA_QBB_POP_1 at base %p is 0x%lx\n", qsa, temp);
-#endif
-		wildfire_iop_mask |= (1 << soft_qbb);
-		wildfire_ior_mask |= ((temp >> 4) & 0xf) << (soft_qbb << 2);
-
-		temp = qsa->qsa_qbb_id.csr;
-#if 0
-	printk(KERN_ERR "QSA_QBB_ID at %p is 0x%lx\n", qsa, temp);
-#endif
-		if (temp & 0x20)
-		    wildfire_gp_mask |= (1 << soft_qbb);
-
-		/* Probe for PCA existence here. */
-		for (i = 0; i < WILDFIRE_PCA_PER_QBB; i++) {
-		    iop = WILDFIRE_iop(soft_qbb);
-		    ne = WILDFIRE_ne(soft_qbb, i);
-		    fe = WILDFIRE_fe(soft_qbb, i);
-
-		    if ((iop->iop_hose[i].init.csr & 1) == 1 &&
-			((ne->ne_what_am_i.csr & 0xf00000300UL) == 0x100000300UL) &&
-			((fe->fe_what_am_i.csr & 0xf00000300UL) == 0x100000200UL))
-		    {
-		        wildfire_pca_mask |= 1 << ((soft_qbb << 2) + i);
-		    }
-		}
-
-	    }
-	}
-#if DEBUG_DUMP_CONFIG
-	wildfire_dump_hardware_config();
-#endif
-}
-
-void __init
-wildfire_init_arch(void)
-{
-	int qbbno;
-
-	/* With multiple PCI buses, we play with I/O as physical addrs.  */
-	ioport_resource.end = ~0UL;
-
-
-	/* Probe the hardware for info about configuration. */
-	wildfire_hardware_probe();
-
-	/* Now init all the found QBBs. */
-	for (qbbno = 0; qbbno < WILDFIRE_MAX_QBB; qbbno++) {
-		wildfire_init_qbb(qbbno);
-	}
-
-	/* Normal direct PCI DMA mapping. */ 
-	__direct_map_base = 0x40000000UL;
-	__direct_map_size = 0x80000000UL;
-}
-
-void
-wildfire_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	mb();
-	mb();  /* magic */
-	draina();
-	/* FIXME: clear pci errors */
-	wrmces(0x7);
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "WILDFIRE",
-			    mcheck_expected(smp_processor_id()));
-}
-
-void
-wildfire_kill_arch(int mode)
-{
-}
-
-void
-wildfire_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	int qbbno = hose->index >> 3;
-	int hoseno = hose->index & 7;
-	wildfire_pci *pci = WILDFIRE_pci(qbbno, hoseno);
-
-	mb();
-	pci->pci_flush_tlb.csr; /* reading does the trick */
-}
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
-		 "pci_addr=0x%p, type1=0x%p)\n",
-		 bus, device_fn, where, pci_addr, type1));
-
-	if (!pbus->parent) /* No parent means peer PCI bus. */
-		bus = 0;
-	*type1 = (bus != 0);
-
-	addr = (bus << 16) | (device_fn << 8) | where;
-	addr |= hose->config_space_base;
-		
-	*pci_addr = addr;
-	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static int 
-wildfire_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 *value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		*value = __kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		*value = __kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*value = *(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-wildfire_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 value)
-{
-	unsigned long addr;
-	unsigned char type1;
-
-	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 1:
-		__kernel_stb(value, *(vucp)addr);
-		mb();
-		__kernel_ldbu(*(vucp)addr);
-		break;
-	case 2:
-		__kernel_stw(value, *(vusp)addr);
-		mb();
-		__kernel_ldwu(*(vusp)addr);
-		break;
-	case 4:
-		*(vuip)addr = value;
-		mb();
-		*(vuip)addr;
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops wildfire_pci_ops = 
-{
-	.read =		wildfire_read_config,
-	.write =	wildfire_write_config,
-};
-
-
-/*
- * NUMA Support
- */
-int wildfire_pa_to_nid(unsigned long pa)
-{
-	return pa >> 36;
-}
-
-int wildfire_cpuid_to_nid(int cpuid)
-{
-	/* assume 4 CPUs per node */
-	return cpuid >> 2;
-}
-
-unsigned long wildfire_node_mem_start(int nid)
-{
-	/* 64GB per node */
-	return (unsigned long)nid * (64UL * 1024 * 1024 * 1024);
-}
-
-unsigned long wildfire_node_mem_size(int nid)
-{
-	/* 64GB per node */
-	return 64UL * 1024 * 1024 * 1024;
-}
-
-#if DEBUG_DUMP_REGS
-
-static void __init
-wildfire_dump_pci_regs(int qbbno, int hoseno)
-{
-	wildfire_pci *pci = WILDFIRE_pci(qbbno, hoseno);
-	int i;
-
-	printk(KERN_ERR "PCI registers for QBB %d hose %d (%p)\n",
-	       qbbno, hoseno, pci);
-
-	printk(KERN_ERR " PCI_IO_ADDR_EXT: 0x%16lx\n",
-	       pci->pci_io_addr_ext.csr);
-	printk(KERN_ERR " PCI_CTRL:        0x%16lx\n", pci->pci_ctrl.csr);
-	printk(KERN_ERR " PCI_ERR_SUM:     0x%16lx\n", pci->pci_err_sum.csr);
-	printk(KERN_ERR " PCI_ERR_ADDR:    0x%16lx\n", pci->pci_err_addr.csr);
-	printk(KERN_ERR " PCI_STALL_CNT:   0x%16lx\n", pci->pci_stall_cnt.csr);
-	printk(KERN_ERR " PCI_PEND_INT:    0x%16lx\n", pci->pci_pend_int.csr);
-	printk(KERN_ERR " PCI_SENT_INT:    0x%16lx\n", pci->pci_sent_int.csr);
-
-	printk(KERN_ERR " DMA window registers for QBB %d hose %d (%p)\n",
-	       qbbno, hoseno, pci);
-	for (i = 0; i < 4; i++) {
-		printk(KERN_ERR "  window %d: 0x%16lx 0x%16lx 0x%16lx\n", i,
-		       pci->pci_window[i].wbase.csr,
-		       pci->pci_window[i].wmask.csr,
-		       pci->pci_window[i].tbase.csr);
-	}
-	printk(KERN_ERR "\n");
-}
-
-static void __init
-wildfire_dump_pca_regs(int qbbno, int pcano)
-{
-	wildfire_pca *pca = WILDFIRE_pca(qbbno, pcano);
-	int i;
-
-	printk(KERN_ERR "PCA registers for QBB %d PCA %d (%p)\n",
-	       qbbno, pcano, pca);
-
-	printk(KERN_ERR " PCA_WHAT_AM_I: 0x%16lx\n", pca->pca_what_am_i.csr);
-	printk(KERN_ERR " PCA_ERR_SUM:   0x%16lx\n", pca->pca_err_sum.csr);
-	printk(KERN_ERR " PCA_PEND_INT:  0x%16lx\n", pca->pca_pend_int.csr);
-	printk(KERN_ERR " PCA_SENT_INT:  0x%16lx\n", pca->pca_sent_int.csr);
-	printk(KERN_ERR " PCA_STDIO_EL:  0x%16lx\n",
-	       pca->pca_stdio_edge_level.csr);
-
-	printk(KERN_ERR " PCA target registers for QBB %d PCA %d (%p)\n",
-	       qbbno, pcano, pca);
-	for (i = 0; i < 4; i++) {
-	  printk(KERN_ERR "  target %d: 0x%16lx 0x%16lx\n", i,
-		       pca->pca_int[i].target.csr,
-		       pca->pca_int[i].enable.csr);
-	}
-
-	printk(KERN_ERR "\n");
-}
-
-static void __init
-wildfire_dump_qsa_regs(int qbbno)
-{
-	wildfire_qsa *qsa = WILDFIRE_qsa(qbbno);
-	int i;
-
-	printk(KERN_ERR "QSA registers for QBB %d (%p)\n", qbbno, qsa);
-
-	printk(KERN_ERR " QSA_QBB_ID:      0x%16lx\n", qsa->qsa_qbb_id.csr);
-	printk(KERN_ERR " QSA_PORT_ENA:    0x%16lx\n", qsa->qsa_port_ena.csr);
-	printk(KERN_ERR " QSA_REF_INT:     0x%16lx\n", qsa->qsa_ref_int.csr);
-
-	for (i = 0; i < 5; i++)
-		printk(KERN_ERR " QSA_CONFIG_%d:    0x%16lx\n",
-		       i, qsa->qsa_config[i].csr);
-
-	for (i = 0; i < 2; i++)
-		printk(KERN_ERR " QSA_QBB_POP_%d:   0x%16lx\n",
-		       i, qsa->qsa_qbb_pop[0].csr);
-
-	printk(KERN_ERR "\n");
-}
-
-static void __init
-wildfire_dump_qsd_regs(int qbbno)
-{
-	wildfire_qsd *qsd = WILDFIRE_qsd(qbbno);
-
-	printk(KERN_ERR "QSD registers for QBB %d (%p)\n", qbbno, qsd);
-
-	printk(KERN_ERR " QSD_WHAMI:         0x%16lx\n", qsd->qsd_whami.csr);
-	printk(KERN_ERR " QSD_REV:           0x%16lx\n", qsd->qsd_rev.csr);
-	printk(KERN_ERR " QSD_PORT_PRESENT:  0x%16lx\n",
-	       qsd->qsd_port_present.csr);
-	printk(KERN_ERR " QSD_PORT_ACTUVE:   0x%16lx\n",
-	       qsd->qsd_port_active.csr);
-	printk(KERN_ERR " QSD_FAULT_ENA:     0x%16lx\n",
-	       qsd->qsd_fault_ena.csr);
-	printk(KERN_ERR " QSD_CPU_INT_ENA:   0x%16lx\n",
-	       qsd->qsd_cpu_int_ena.csr);
-	printk(KERN_ERR " QSD_MEM_CONFIG:    0x%16lx\n",
-	       qsd->qsd_mem_config.csr);
-	printk(KERN_ERR " QSD_ERR_SUM:       0x%16lx\n",
-	       qsd->qsd_err_sum.csr);
-
-	printk(KERN_ERR "\n");
-}
-
-static void __init
-wildfire_dump_iop_regs(int qbbno)
-{
-	wildfire_iop *iop = WILDFIRE_iop(qbbno);
-	int i;
-
-	printk(KERN_ERR "IOP registers for QBB %d (%p)\n", qbbno, iop);
-
-	printk(KERN_ERR " IOA_CONFIG:          0x%16lx\n", iop->ioa_config.csr);
-	printk(KERN_ERR " IOD_CONFIG:          0x%16lx\n", iop->iod_config.csr);
-	printk(KERN_ERR " IOP_SWITCH_CREDITS:  0x%16lx\n",
-	       iop->iop_switch_credits.csr);
-	printk(KERN_ERR " IOP_HOSE_CREDITS:    0x%16lx\n",
-	       iop->iop_hose_credits.csr);
-
-	for (i = 0; i < 4; i++) 
-		printk(KERN_ERR " IOP_HOSE_%d_INIT:     0x%16lx\n",
-		       i, iop->iop_hose[i].init.csr);
-	for (i = 0; i < 4; i++) 
-		printk(KERN_ERR " IOP_DEV_INT_TARGET_%d: 0x%16lx\n",
-		       i, iop->iop_dev_int[i].target.csr);
-
-	printk(KERN_ERR "\n");
-}
-
-static void __init
-wildfire_dump_gp_regs(int qbbno)
-{
-	wildfire_gp *gp = WILDFIRE_gp(qbbno);
-	int i;
-
-	printk(KERN_ERR "GP registers for QBB %d (%p)\n", qbbno, gp);
-	for (i = 0; i < 4; i++) 
-		printk(KERN_ERR " GPA_QBB_MAP_%d:     0x%16lx\n",
-		       i, gp->gpa_qbb_map[i].csr);
-
-	printk(KERN_ERR " GPA_MEM_POP_MAP:   0x%16lx\n",
-	       gp->gpa_mem_pop_map.csr);
-	printk(KERN_ERR " GPA_SCRATCH:       0x%16lx\n", gp->gpa_scratch.csr);
-	printk(KERN_ERR " GPA_DIAG:          0x%16lx\n", gp->gpa_diag.csr);
-	printk(KERN_ERR " GPA_CONFIG_0:      0x%16lx\n", gp->gpa_config_0.csr);
-	printk(KERN_ERR " GPA_INIT_ID:       0x%16lx\n", gp->gpa_init_id.csr);
-	printk(KERN_ERR " GPA_CONFIG_2:      0x%16lx\n", gp->gpa_config_2.csr);
-
-	printk(KERN_ERR "\n");
-}
-#endif /* DUMP_REGS */
-
-#if DEBUG_DUMP_CONFIG
-static void __init
-wildfire_dump_hardware_config(void)
-{
-	int i;
-
-	printk(KERN_ERR "Probed Hardware Configuration\n");
-
-	printk(KERN_ERR " hard_qbb_mask:  0x%16lx\n", wildfire_hard_qbb_mask);
-	printk(KERN_ERR " soft_qbb_mask:  0x%16lx\n", wildfire_soft_qbb_mask);
-
-	printk(KERN_ERR " gp_mask:        0x%16lx\n", wildfire_gp_mask);
-	printk(KERN_ERR " hs_mask:        0x%16lx\n", wildfire_hs_mask);
-	printk(KERN_ERR " iop_mask:       0x%16lx\n", wildfire_iop_mask);
-	printk(KERN_ERR " ior_mask:       0x%16lx\n", wildfire_ior_mask);
-	printk(KERN_ERR " pca_mask:       0x%16lx\n", wildfire_pca_mask);
-
-	printk(KERN_ERR " cpu_mask:       0x%16lx\n", wildfire_cpu_mask);
-	printk(KERN_ERR " mem_mask:       0x%16lx\n", wildfire_mem_mask);
-
-	printk(" hard_qbb_map: ");
-	for (i = 0; i < WILDFIRE_MAX_QBB; i++)
-	    if (wildfire_hard_qbb_map[i] == QBB_MAP_EMPTY)
-		printk("--- ");
-	    else
-		printk("%3d ", wildfire_hard_qbb_map[i]);
-	printk("\n");
-
-	printk(" soft_qbb_map: ");
-	for (i = 0; i < WILDFIRE_MAX_QBB; i++)
-	    if (wildfire_soft_qbb_map[i] == QBB_MAP_EMPTY)
-		printk("--- ");
-	    else
-		printk("%3d ", wildfire_soft_qbb_map[i]);
-	printk("\n");
-}
-#endif /* DUMP_CONFIG */
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/entry.S b/ANDROID_3.4.5/arch/alpha/kernel/entry.S
deleted file mode 100644
index 6d159cee..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/entry.S
+++ /dev/null
@@ -1,929 +0,0 @@
-/*
- * arch/alpha/kernel/entry.S
- *
- * Kernel entry-points.
- */
-
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/pal.h>
-#include <asm/errno.h>
-#include <asm/unistd.h>
-
-	.text
-	.set noat
-
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	320
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs 9-15 preserved by C code
- * regs 16-18 saved by PAL-code
- * regs 29-30 saved and set up by PAL-code
- * JRP - Save regs 16-18 in a special area of the stack, so that
- * the palcode-provided values are available to the signal handler.
- */
-
-#define SAVE_ALL			\
-	subq	$sp, SP_OFF, $sp;	\
-	stq	$0, 0($sp);		\
-	stq	$1, 8($sp);		\
-	stq	$2, 16($sp);		\
-	stq	$3, 24($sp);		\
-	stq	$4, 32($sp);		\
-	stq	$28, 144($sp);		\
-	lda	$2, alpha_mv;		\
-	stq	$5, 40($sp);		\
-	stq	$6, 48($sp);		\
-	stq	$7, 56($sp);		\
-	stq	$8, 64($sp);		\
-	stq	$19, 72($sp);		\
-	stq	$20, 80($sp);		\
-	stq	$21, 88($sp);		\
-	ldq	$2, HAE_CACHE($2);	\
-	stq	$22, 96($sp);		\
-	stq	$23, 104($sp);		\
-	stq	$24, 112($sp);		\
-	stq	$25, 120($sp);		\
-	stq	$26, 128($sp);		\
-	stq	$27, 136($sp);		\
-	stq	$2, 152($sp);		\
-	stq	$16, 160($sp);		\
-	stq	$17, 168($sp);		\
-	stq	$18, 176($sp)
-
-#define RESTORE_ALL			\
-	lda	$19, alpha_mv;		\
-	ldq	$0, 0($sp);		\
-	ldq	$1, 8($sp);		\
-	ldq	$2, 16($sp);		\
-	ldq	$3, 24($sp);		\
-	ldq	$21, 152($sp);		\
-	ldq	$20, HAE_CACHE($19);	\
-	ldq	$4, 32($sp);		\
-	ldq	$5, 40($sp);		\
-	ldq	$6, 48($sp);		\
-	ldq	$7, 56($sp);		\
-	subq	$20, $21, $20;		\
-	ldq	$8, 64($sp);		\
-	beq	$20, 99f;		\
-	ldq	$20, HAE_REG($19);	\
-	stq	$21, HAE_CACHE($19);	\
-	stq	$21, 0($20);		\
-99:;					\
-	ldq	$19, 72($sp);		\
-	ldq	$20, 80($sp);		\
-	ldq	$21, 88($sp);		\
-	ldq	$22, 96($sp);		\
-	ldq	$23, 104($sp);		\
-	ldq	$24, 112($sp);		\
-	ldq	$25, 120($sp);		\
-	ldq	$26, 128($sp);		\
-	ldq	$27, 136($sp);		\
-	ldq	$28, 144($sp);		\
-	addq	$sp, SP_OFF, $sp
-
-/*
- * Non-syscall kernel entry points.
- */
-
-	.align	4
-	.globl	entInt
-	.ent	entInt
-entInt:
-	SAVE_ALL
-	lda	$8, 0x3fff
-	lda	$26, ret_from_sys_call
-	bic	$sp, $8, $8
-	mov	$sp, $19
-	jsr	$31, do_entInt
-.end entInt
-
-	.align	4
-	.globl	entArith
-	.ent	entArith
-entArith:
-	SAVE_ALL
-	lda	$8, 0x3fff
-	lda	$26, ret_from_sys_call
-	bic	$sp, $8, $8
-	mov	$sp, $18
-	jsr	$31, do_entArith
-.end entArith
-
-	.align	4
-	.globl	entMM
-	.ent	entMM
-entMM:
-	SAVE_ALL
-/* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	stq	$9, 0($sp)
-	stq	$10, 8($sp)
-	stq	$11, 16($sp)
-	stq	$12, 24($sp)
-	stq	$13, 32($sp)
-	stq	$14, 40($sp)
-	stq	$15, 48($sp)
-	addq	$sp, 56, $19
-/* handle the fault */
-	lda	$8, 0x3fff
-	bic	$sp, $8, $8
-	jsr	$26, do_page_fault
-/* reload the registers after the exception code played.  */
-	ldq	$9, 0($sp)
-	ldq	$10, 8($sp)
-	ldq	$11, 16($sp)
-	ldq	$12, 24($sp)
-	ldq	$13, 32($sp)
-	ldq	$14, 40($sp)
-	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
-/* finish up the syscall as normal.  */
-	br	ret_from_sys_call
-.end entMM
-
-	.align	4
-	.globl	entIF
-	.ent	entIF
-entIF:
-	SAVE_ALL
-	lda	$8, 0x3fff
-	lda	$26, ret_from_sys_call
-	bic	$sp, $8, $8
-	mov	$sp, $17
-	jsr	$31, do_entIF
-.end entIF
-
-	.align	4
-	.globl	entUna
-	.ent	entUna
-entUna:
-	lda	$sp, -256($sp)
-	stq	$0, 0($sp)
-	ldq	$0, 256($sp)	/* get PS */
-	stq	$1, 8($sp)
-	stq	$2, 16($sp)
-	stq	$3, 24($sp)
-	and	$0, 8, $0		/* user mode? */
-	stq	$4, 32($sp)
-	bne	$0, entUnaUser	/* yup -> do user-level unaligned fault */
-	stq	$5, 40($sp)
-	stq	$6, 48($sp)
-	stq	$7, 56($sp)
-	stq	$8, 64($sp)
-	stq	$9, 72($sp)
-	stq	$10, 80($sp)
-	stq	$11, 88($sp)
-	stq	$12, 96($sp)
-	stq	$13, 104($sp)
-	stq	$14, 112($sp)
-	stq	$15, 120($sp)
-	/* 16-18 PAL-saved */
-	stq	$19, 152($sp)
-	stq	$20, 160($sp)
-	stq	$21, 168($sp)
-	stq	$22, 176($sp)
-	stq	$23, 184($sp)
-	stq	$24, 192($sp)
-	stq	$25, 200($sp)
-	stq	$26, 208($sp)
-	stq	$27, 216($sp)
-	stq	$28, 224($sp)
-	mov	$sp, $19
-	stq	$gp, 232($sp)
-	lda	$8, 0x3fff
-	stq	$31, 248($sp)
-	bic	$sp, $8, $8
-	jsr	$26, do_entUna
-	ldq	$0, 0($sp)
-	ldq	$1, 8($sp)
-	ldq	$2, 16($sp)
-	ldq	$3, 24($sp)
-	ldq	$4, 32($sp)
-	ldq	$5, 40($sp)
-	ldq	$6, 48($sp)
-	ldq	$7, 56($sp)
-	ldq	$8, 64($sp)
-	ldq	$9, 72($sp)
-	ldq	$10, 80($sp)
-	ldq	$11, 88($sp)
-	ldq	$12, 96($sp)
-	ldq	$13, 104($sp)
-	ldq	$14, 112($sp)
-	ldq	$15, 120($sp)
-	/* 16-18 PAL-saved */
-	ldq	$19, 152($sp)
-	ldq	$20, 160($sp)
-	ldq	$21, 168($sp)
-	ldq	$22, 176($sp)
-	ldq	$23, 184($sp)
-	ldq	$24, 192($sp)
-	ldq	$25, 200($sp)
-	ldq	$26, 208($sp)
-	ldq	$27, 216($sp)
-	ldq	$28, 224($sp)
-	ldq	$gp, 232($sp)
-	lda	$sp, 256($sp)
-	call_pal PAL_rti
-.end entUna
-
-	.align	4
-	.ent	entUnaUser
-entUnaUser:
-	ldq	$0, 0($sp)	/* restore original $0 */
-	lda	$sp, 256($sp)	/* pop entUna's stack frame */
-	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	stq	$9, 0($sp)
-	stq	$10, 8($sp)
-	stq	$11, 16($sp)
-	stq	$12, 24($sp)
-	stq	$13, 32($sp)
-	stq	$14, 40($sp)
-	stq	$15, 48($sp)
-	lda	$8, 0x3fff
-	addq	$sp, 56, $19
-	bic	$sp, $8, $8
-	jsr	$26, do_entUnaUser
-	ldq	$9, 0($sp)
-	ldq	$10, 8($sp)
-	ldq	$11, 16($sp)
-	ldq	$12, 24($sp)
-	ldq	$13, 32($sp)
-	ldq	$14, 40($sp)
-	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
-	br	ret_from_sys_call
-.end entUnaUser
-
-	.align	4
-	.globl	entDbg
-	.ent	entDbg
-entDbg:
-	SAVE_ALL
-	lda	$8, 0x3fff
-	lda	$26, ret_from_sys_call
-	bic	$sp, $8, $8
-	mov	$sp, $16
-	jsr	$31, do_entDbg
-.end entDbg
-
-/*
- * The system call entry point is special.  Most importantly, it looks
- * like a function call to userspace as far as clobbered registers.  We
- * do preserve the argument registers (for syscall restarts) and $26
- * (for leaf syscall functions).
- *
- * So much for theory.  We don't take advantage of this yet.
- *
- * Note that a0-a2 are not saved by PALcode as with the other entry points.
- */
-
-	.align	4
-	.globl	entSys
-	.globl	ret_from_sys_call
-	.ent	entSys
-entSys:
-	SAVE_ALL
-	lda	$8, 0x3fff
-	bic	$sp, $8, $8
-	lda	$4, NR_SYSCALLS($31)
-	stq	$16, SP_OFF+24($sp)
-	lda	$5, sys_call_table
-	lda	$27, sys_ni_syscall
-	cmpult	$0, $4, $4
-	ldl	$3, TI_FLAGS($8)
-	stq	$17, SP_OFF+32($sp)
-	s8addq	$0, $5, $5
-	stq	$18, SP_OFF+40($sp)
-	blbs	$3, strace
-	beq	$4, 1f
-	ldq	$27, 0($5)
-1:	jsr	$26, ($27), alpha_ni_syscall
-	ldgp	$gp, 0($26)
-	blt	$0, $syscall_error	/* the call failed */
-	stq	$0, 0($sp)
-	stq	$31, 72($sp)		/* a3=0 => no error */
-
-	.align	4
-ret_from_sys_call:
-	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
-	ldq	$0, SP_OFF($sp)
-	and	$0, 8, $0
-	beq	$0, ret_to_kernel
-ret_to_user:
-	/* Make sure need_resched and sigpending don't change between
-		sampling and the rti.  */
-	lda	$16, 7
-	call_pal PAL_swpipl
-	ldl	$5, TI_FLAGS($8)
-	and	$5, _TIF_WORK_MASK, $2
-	bne	$2, work_pending
-restore_all:
-	RESTORE_ALL
-	call_pal PAL_rti
-
-ret_to_kernel:
-	lda	$16, 7
-	call_pal PAL_swpipl
-	br restore_all
-
-	.align 3
-$syscall_error:
-	/*
-	 * Some system calls (e.g., ptrace) can return arbitrary
-	 * values which might normally be mistaken as error numbers.
-	 * Those functions must zero $0 (v0) directly in the stack
-	 * frame to indicate that a negative return value wasn't an
-	 * error number..
-	 */
-	ldq	$19, 0($sp)	/* old syscall nr (zero if success) */
-	beq	$19, $ret_success
-
-	ldq	$20, 72($sp)	/* .. and this a3 */
-	subq	$31, $0, $0	/* with error in v0 */
-	addq	$31, 1, $1	/* set a3 for errno return */
-	stq	$0, 0($sp)
-	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
-	stq	$1, 72($sp)	/* a3 for return */
-	br	ret_from_sys_call
-
-$ret_success:
-	stq	$0, 0($sp)
-	stq	$31, 72($sp)	/* a3=0 => no error */
-	br	ret_from_sys_call
-.end entSys
-
-/*
- * Do all cleanup when returning from all interrupts and system calls.
- *
- * Arguments:
- *       $5: TI_FLAGS.
- *       $8: current.
- *      $19: The old syscall number, or zero if this is not a return
- *           from a syscall that errored and is possibly restartable.
- *      $20: The old a3 value
- */
-
-	.align	4
-	.ent	work_pending
-work_pending:
-	and	$5, _TIF_NEED_RESCHED, $2
-	beq	$2, $work_notifysig
-
-$work_resched:
-	subq	$sp, 16, $sp
-	stq	$19, 0($sp)              /* save syscall nr */
-	stq	$20, 8($sp)              /* and error indication (a3) */
-	jsr	$26, schedule
-	ldq	$19, 0($sp)
-	ldq	$20, 8($sp)
-	addq	$sp, 16, $sp
-	/* Make sure need_resched and sigpending don't change between
-		sampling and the rti.  */
-	lda	$16, 7
-	call_pal PAL_swpipl
-	ldl	$5, TI_FLAGS($8)
-	and	$5, _TIF_WORK_MASK, $2
-	beq	$2, restore_all
-	and	$5, _TIF_NEED_RESCHED, $2
-	bne	$2, $work_resched
-
-$work_notifysig:
-	mov	$sp, $16
-	bsr	$1, do_switch_stack
-	mov	$sp, $17
-	mov	$5, $18
-	mov	$19, $9		/* save old syscall number */
-	mov	$20, $10	/* save old a3 */
-	and	$5, _TIF_SIGPENDING, $2
-	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
-	jsr	$26, do_notify_resume
-	mov	$9, $19
-	mov	$10, $20
-	bsr	$1, undo_switch_stack
-	br	ret_to_user
-.end work_pending
-
-/*
- * PTRACE syscall handler
- */
-
-	.align	4
-	.ent	strace
-strace:
-	/* set up signal stack, call syscall_trace */
-	bsr	$1, do_switch_stack
-	jsr	$26, syscall_trace
-	bsr	$1, undo_switch_stack
-
-	/* get the system call number and the arguments back.. */
-	ldq	$0, 0($sp)
-	ldq	$16, SP_OFF+24($sp)
-	ldq	$17, SP_OFF+32($sp)
-	ldq	$18, SP_OFF+40($sp)
-	ldq	$19, 72($sp)
-	ldq	$20, 80($sp)
-	ldq	$21, 88($sp)
-
-	/* get the system call pointer.. */
-	lda	$1, NR_SYSCALLS($31)
-	lda	$2, sys_call_table
-	lda	$27, alpha_ni_syscall
-	cmpult	$0, $1, $1
-	s8addq	$0, $2, $2
-	beq	$1, 1f
-	ldq	$27, 0($2)
-1:	jsr	$26, ($27), sys_gettimeofday
-ret_from_straced:
-	ldgp	$gp, 0($26)
-
-	/* check return.. */
-	blt	$0, $strace_error	/* the call failed */
-	stq	$31, 72($sp)		/* a3=0 => no error */
-$strace_success:
-	stq	$0, 0($sp)		/* save return value */
-
-	bsr	$1, do_switch_stack
-	jsr	$26, syscall_trace
-	bsr	$1, undo_switch_stack
-	br	$31, ret_from_sys_call
-
-	.align	3
-$strace_error:
-	ldq	$19, 0($sp)	/* old syscall nr (zero if success) */
-	beq	$19, $strace_success
-	ldq	$20, 72($sp)	/* .. and this a3 */
-
-	subq	$31, $0, $0	/* with error in v0 */
-	addq	$31, 1, $1	/* set a3 for errno return */
-	stq	$0, 0($sp)
-	stq	$1, 72($sp)	/* a3 for return */
-
-	bsr	$1, do_switch_stack
-	mov	$19, $9		/* save old syscall number */
-	mov	$20, $10	/* save old a3 */
-	jsr	$26, syscall_trace
-	mov	$9, $19
-	mov	$10, $20
-	bsr	$1, undo_switch_stack
-
-	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
-	br	ret_from_sys_call
-.end strace
-
-/*
- * Save and restore the switch stack -- aka the balance of the user context.
- */
-
-	.align	4
-	.ent	do_switch_stack
-do_switch_stack:
-	lda	$sp, -SWITCH_STACK_SIZE($sp)
-	stq	$9, 0($sp)
-	stq	$10, 8($sp)
-	stq	$11, 16($sp)
-	stq	$12, 24($sp)
-	stq	$13, 32($sp)
-	stq	$14, 40($sp)
-	stq	$15, 48($sp)
-	stq	$26, 56($sp)
-	stt	$f0, 64($sp)
-	stt	$f1, 72($sp)
-	stt	$f2, 80($sp)
-	stt	$f3, 88($sp)
-	stt	$f4, 96($sp)
-	stt	$f5, 104($sp)
-	stt	$f6, 112($sp)
-	stt	$f7, 120($sp)
-	stt	$f8, 128($sp)
-	stt	$f9, 136($sp)
-	stt	$f10, 144($sp)
-	stt	$f11, 152($sp)
-	stt	$f12, 160($sp)
-	stt	$f13, 168($sp)
-	stt	$f14, 176($sp)
-	stt	$f15, 184($sp)
-	stt	$f16, 192($sp)
-	stt	$f17, 200($sp)
-	stt	$f18, 208($sp)
-	stt	$f19, 216($sp)
-	stt	$f20, 224($sp)
-	stt	$f21, 232($sp)
-	stt	$f22, 240($sp)
-	stt	$f23, 248($sp)
-	stt	$f24, 256($sp)
-	stt	$f25, 264($sp)
-	stt	$f26, 272($sp)
-	stt	$f27, 280($sp)
-	mf_fpcr	$f0		# get fpcr
-	stt	$f28, 288($sp)
-	stt	$f29, 296($sp)
-	stt	$f30, 304($sp)
-	stt	$f0, 312($sp)	# save fpcr in slot of $f31
-	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
-	ret	$31, ($1), 1
-.end do_switch_stack
-
-	.align	4
-	.ent	undo_switch_stack
-undo_switch_stack:
-	ldq	$9, 0($sp)
-	ldq	$10, 8($sp)
-	ldq	$11, 16($sp)
-	ldq	$12, 24($sp)
-	ldq	$13, 32($sp)
-	ldq	$14, 40($sp)
-	ldq	$15, 48($sp)
-	ldq	$26, 56($sp)
-	ldt	$f30, 312($sp)	# get saved fpcr
-	ldt	$f0, 64($sp)
-	ldt	$f1, 72($sp)
-	ldt	$f2, 80($sp)
-	ldt	$f3, 88($sp)
-	mt_fpcr	$f30		# install saved fpcr
-	ldt	$f4, 96($sp)
-	ldt	$f5, 104($sp)
-	ldt	$f6, 112($sp)
-	ldt	$f7, 120($sp)
-	ldt	$f8, 128($sp)
-	ldt	$f9, 136($sp)
-	ldt	$f10, 144($sp)
-	ldt	$f11, 152($sp)
-	ldt	$f12, 160($sp)
-	ldt	$f13, 168($sp)
-	ldt	$f14, 176($sp)
-	ldt	$f15, 184($sp)
-	ldt	$f16, 192($sp)
-	ldt	$f17, 200($sp)
-	ldt	$f18, 208($sp)
-	ldt	$f19, 216($sp)
-	ldt	$f20, 224($sp)
-	ldt	$f21, 232($sp)
-	ldt	$f22, 240($sp)
-	ldt	$f23, 248($sp)
-	ldt	$f24, 256($sp)
-	ldt	$f25, 264($sp)
-	ldt	$f26, 272($sp)
-	ldt	$f27, 280($sp)
-	ldt	$f28, 288($sp)
-	ldt	$f29, 296($sp)
-	ldt	$f30, 304($sp)
-	lda	$sp, SWITCH_STACK_SIZE($sp)
-	ret	$31, ($1), 1
-.end undo_switch_stack
-
-/*
- * The meat of the context switch code.
- */
-
-	.align	4
-	.globl	alpha_switch_to
-	.ent	alpha_switch_to
-alpha_switch_to:
-	.prologue 0
-	bsr	$1, do_switch_stack
-	call_pal PAL_swpctx
-	lda	$8, 0x3fff
-	bsr	$1, undo_switch_stack
-	bic	$sp, $8, $8
-	mov	$17, $0
-	ret
-.end alpha_switch_to
-
-/*
- * New processes begin life here.
- */
-
-	.globl	ret_from_fork
-	.align	4
-	.ent	ret_from_fork
-ret_from_fork:
-	lda	$26, ret_from_sys_call
-	mov	$17, $16
-	jmp	$31, schedule_tail
-.end ret_from_fork
-
-/*
- * kernel_thread(fn, arg, clone_flags)
- */
-	.align 4
-	.globl	kernel_thread
-	.ent	kernel_thread
-kernel_thread:
-	/* We can be called from a module.  */
-	ldgp	$gp, 0($27)
-	.prologue 1
-	subq	$sp, SP_OFF+6*8, $sp
-	br	$1, 2f		/* load start address */
-
-	/* We've now "returned" from a fake system call.  */
-	unop
-	blt	$0, 1f		/* error?  */
-	ldi	$1, 0x3fff
-	beq	$20, 1f		/* parent or child?  */
-
-	bic	$sp, $1, $8	/* in child.  */
-	jsr	$26, ($27)
-	ldgp	$gp, 0($26)
-	mov	$0, $16
-	mov	$31, $26
-	jmp	$31, sys_exit
-
-1:	ret			/* in parent.  */
-
-	.align 4
-2:	/* Fake a system call stack frame, as we can't do system calls
-	   from kernel space.  Note that we store FN and ARG as they
-	   need to be set up in the child for the call.  Also store $8
-	   and $26 for use in the parent.  */
-	stq	$31, SP_OFF($sp)	/* ps */
-	stq	$1, SP_OFF+8($sp)	/* pc */
-	stq	$gp, SP_OFF+16($sp)	/* gp */
-	stq	$16, 136($sp)		/* $27; FN for child */
-	stq	$17, SP_OFF+24($sp)	/* $16; ARG for child */
-	stq	$8, 64($sp)		/* $8 */
-	stq	$26, 128($sp)		/* $26 */
-	/* Avoid the HAE being gratuitously wrong, to avoid restoring it.  */
-	ldq	$2, alpha_mv+HAE_CACHE
-	stq	$2, 152($sp)		/* HAE */
-
-	/* Shuffle FLAGS to the front; add CLONE_VM.  */
-	ldi	$1, CLONE_VM|CLONE_UNTRACED
-	or	$18, $1, $16
-	bsr	$26, sys_clone
-
-	/* We don't actually care for a3 success widgetry in the kernel.
-	   Not for positive errno values.  */
-	stq	$0, 0($sp)		/* $0 */
-	br	ret_to_kernel
-.end kernel_thread
-
-/*
- * kernel_execve(path, argv, envp)
- */
-	.align	4
-	.globl	kernel_execve
-	.ent	kernel_execve
-kernel_execve:
-	/* We can be called from a module.  */
-	ldgp	$gp, 0($27)
-	lda	$sp, -(32+SIZEOF_PT_REGS+8)($sp)
-	.frame	$sp, 32+SIZEOF_PT_REGS+8, $26, 0
-	stq	$26, 0($sp)
-	stq	$16, 8($sp)
-	stq	$17, 16($sp)
-	stq	$18, 24($sp)
-	.prologue 1
-
-	lda	$16, 32($sp)
-	lda	$17, 0
-	lda	$18, SIZEOF_PT_REGS
-	bsr	$26, memset		!samegp
-
-	/* Avoid the HAE being gratuitously wrong, which would cause us
-	   to do the whole turn off interrupts thing and restore it.  */
-	ldq	$2, alpha_mv+HAE_CACHE
-	stq	$2, 152+32($sp)
-
-	ldq	$16, 8($sp)
-	ldq	$17, 16($sp)
-	ldq	$18, 24($sp)
-	lda	$19, 32($sp)
-	bsr	$26, do_execve		!samegp
-
-	ldq	$26, 0($sp)
-	bne	$0, 1f			/* error! */
-
-	/* Move the temporary pt_regs struct from its current location
-	   to the top of the kernel stack frame.  See copy_thread for
-	   details for a normal process.  */
-	lda	$16, 0x4000 - SIZEOF_PT_REGS($8)
-	lda	$17, 32($sp)
-	lda	$18, SIZEOF_PT_REGS
-	bsr	$26, memmove		!samegp
-
-	/* Take that over as our new stack frame and visit userland!  */
-	lda	$sp, 0x4000 - SIZEOF_PT_REGS($8)
-	br	$31, ret_from_sys_call
-
-1:	lda	$sp, 32+SIZEOF_PT_REGS+8($sp)
-	ret
-.end kernel_execve
-
-
-/*
- * Special system calls.  Most of these are special in that they either
- * have to play switch_stack games or in some way use the pt_regs struct.
- */
-	.align	4
-	.globl	sys_fork
-	.ent	sys_fork
-sys_fork:
-	.prologue 0
-	mov	$sp, $21
-	bsr	$1, do_switch_stack
-	bis	$31, SIGCHLD, $16
-	mov	$31, $17
-	mov	$31, $18
-	mov	$31, $19
-	mov	$31, $20
-	jsr	$26, alpha_clone
-	bsr	$1, undo_switch_stack
-	ret
-.end sys_fork
-
-	.align	4
-	.globl	sys_clone
-	.ent	sys_clone
-sys_clone:
-	.prologue 0
-	mov	$sp, $21
-	bsr	$1, do_switch_stack
-	/* $16, $17, $18, $19, $20 come from the user.  */
-	jsr	$26, alpha_clone
-	bsr	$1, undo_switch_stack
-	ret
-.end sys_clone
-
-	.align	4
-	.globl	sys_vfork
-	.ent	sys_vfork
-sys_vfork:
-	.prologue 0
-	mov	$sp, $16
-	bsr	$1, do_switch_stack
-	jsr	$26, alpha_vfork
-	bsr	$1, undo_switch_stack
-	ret
-.end sys_vfork
-
-	.align	4
-	.globl	sys_sigreturn
-	.ent	sys_sigreturn
-sys_sigreturn:
-	.prologue 0
-	lda	$9, ret_from_straced
-	cmpult	$26, $9, $9
-	mov	$sp, $17
-	lda	$18, -SWITCH_STACK_SIZE($sp)
-	lda	$sp, -SWITCH_STACK_SIZE($sp)
-	jsr	$26, do_sigreturn
-	bne	$9, 1f
-	jsr	$26, syscall_trace
-1:	br	$1, undo_switch_stack
-	br	ret_from_sys_call
-.end sys_sigreturn
-
-	.align	4
-	.globl	sys_rt_sigreturn
-	.ent	sys_rt_sigreturn
-sys_rt_sigreturn:
-	.prologue 0
-	lda	$9, ret_from_straced
-	cmpult	$26, $9, $9
-	mov	$sp, $17
-	lda	$18, -SWITCH_STACK_SIZE($sp)
-	lda	$sp, -SWITCH_STACK_SIZE($sp)
-	jsr	$26, do_rt_sigreturn
-	bne	$9, 1f
-	jsr	$26, syscall_trace
-1:	br	$1, undo_switch_stack
-	br	ret_from_sys_call
-.end sys_rt_sigreturn
-
-	.align	4
-	.globl	sys_sethae
-	.ent	sys_sethae
-sys_sethae:
-	.prologue 0
-	stq	$16, 152($sp)
-	ret
-.end sys_sethae
-
-	.align	4
-	.globl	osf_getpriority
-	.ent	osf_getpriority
-osf_getpriority:
-	lda	$sp, -16($sp)
-	stq	$26, 0($sp)
-	.prologue 0
-
-	jsr	$26, sys_getpriority
-
-	ldq	$26, 0($sp)
-	blt	$0, 1f
-
-	/* Return value is the unbiased priority, i.e. 20 - prio.
-	   This does result in negative return values, so signal
-	   no error by writing into the R0 slot.  */
-	lda	$1, 20
-	stq	$31, 16($sp)
-	subl	$1, $0, $0
-	unop
-
-1:	lda	$sp, 16($sp)
-	ret
-.end osf_getpriority
-
-	.align	4
-	.globl	sys_getxuid
-	.ent	sys_getxuid
-sys_getxuid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-	ldq	$3, TASK_CRED($2)
-	ldl	$0, CRED_UID($3)
-	ldl	$1, CRED_EUID($3)
-	stq	$1, 80($sp)
-	ret
-.end sys_getxuid
-
-	.align	4
-	.globl	sys_getxgid
-	.ent	sys_getxgid
-sys_getxgid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-	ldq	$3, TASK_CRED($2)
-	ldl	$0, CRED_GID($3)
-	ldl	$1, CRED_EGID($3)
-	stq	$1, 80($sp)
-	ret
-.end sys_getxgid
-
-	.align	4
-	.globl	sys_getxpid
-	.ent	sys_getxpid
-sys_getxpid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-
-	/* See linux/kernel/timer.c sys_getppid for discussion
-	   about this loop.  */
-	ldq	$3, TASK_GROUP_LEADER($2)
-	ldq	$4, TASK_REAL_PARENT($3)
-	ldl	$0, TASK_TGID($2)
-1:	ldl	$1, TASK_TGID($4)
-#ifdef CONFIG_SMP
-	mov	$4, $5
-	mb
-	ldq	$3, TASK_GROUP_LEADER($2)
-	ldq	$4, TASK_REAL_PARENT($3)
-	cmpeq	$4, $5, $5
-	beq	$5, 1b
-#endif
-	stq	$1, 80($sp)
-	ret
-.end sys_getxpid
-
-	.align	4
-	.globl	sys_alpha_pipe
-	.ent	sys_alpha_pipe
-sys_alpha_pipe:
-	lda	$sp, -16($sp)
-	stq	$26, 0($sp)
-	.prologue 0
-
-	mov	$31, $17
-	lda	$16, 8($sp)
-	jsr	$26, do_pipe_flags
-
-	ldq	$26, 0($sp)
-	bne	$0, 1f
-
-	/* The return values are in $0 and $20.  */
-	ldl	$1, 12($sp)
-	ldl	$0, 8($sp)
-
-	stq	$1, 80+16($sp)
-1:	lda	$sp, 16($sp)
-	ret
-.end sys_alpha_pipe
-
-	.align	4
-	.globl	sys_execve
-	.ent	sys_execve
-sys_execve:
-	.prologue 0
-	mov	$sp, $19
-	jmp	$31, do_sys_execve
-.end sys_execve
-
-	.align	4
-	.globl	alpha_ni_syscall
-	.ent	alpha_ni_syscall
-alpha_ni_syscall:
-	.prologue 0
-	/* Special because it also implements overflow handling via
-	   syscall number 0.  And if you recall, zero is a special
-	   trigger for "not an error".  Store large non-zero there.  */
-	lda	$0, -ENOSYS
-	unop
-	stq	$0, 0($sp)
-	ret
-.end alpha_ni_syscall
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/err_common.c b/ANDROID_3.4.5/arch/alpha/kernel/err_common.c
deleted file mode 100644
index 13d53b1c..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/err_common.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/err_common.c
- *
- *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- *	Error handling code supporting Alpha systems
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/hwrpb.h>
-#include <asm/smp.h>
-#include <asm/err_common.h>
-
-#include "err_impl.h"
-#include "proto.h"
-
-/*
- * err_print_prefix -- error handling print routines should prefix
- * all prints with this
- */
-char *err_print_prefix = KERN_NOTICE;
-
-
-/*
- * Generic
- */
-void
-mchk_dump_mem(void *data, size_t length, char **annotation)
-{
-	unsigned long *ldata = data;
-	size_t i;
-	
-	for (i = 0; (i * sizeof(*ldata)) < length; i++) {
-		if (annotation && !annotation[i]) 
-			annotation = NULL;
-		printk("%s    %08x: %016lx    %s\n",
-		       err_print_prefix,
-		       (unsigned)(i * sizeof(*ldata)), ldata[i],
-		       annotation ? annotation[i] : "");
-	}
-}
-
-void
-mchk_dump_logout_frame(struct el_common *mchk_header)
-{
-	printk("%s  -- Frame Header --\n"
-	         "    Frame Size:   %d (0x%x) bytes\n"
-	         "    Flags:        %s%s\n"
-	         "    MCHK Code:    0x%x\n"
-	         "    Frame Rev:    %d\n"
-	         "    Proc Offset:  0x%08x\n"
-	         "    Sys Offset:   0x%08x\n"
-  	         "  -- Processor Region --\n",
-	       err_print_prefix, 
-	       mchk_header->size, mchk_header->size,
-	       mchk_header->retry ? "RETRY " : "", 
-  	         mchk_header->err2 ? "SECOND_ERR " : "",
-	       mchk_header->code,
-	       mchk_header->frame_rev,
-	       mchk_header->proc_offset,
-	       mchk_header->sys_offset);
-
-	mchk_dump_mem((void *)
-		      ((unsigned long)mchk_header + mchk_header->proc_offset),
-		      mchk_header->sys_offset - mchk_header->proc_offset,
-		      NULL);
-	
-	printk("%s  -- System Region --\n", err_print_prefix);
-	mchk_dump_mem((void *)
-		      ((unsigned long)mchk_header + mchk_header->sys_offset),
-		      mchk_header->size - mchk_header->sys_offset,
-		      NULL);
-	printk("%s  -- End of Frame --\n", err_print_prefix);
-}
-
-
-/*
- * Console Data Log
- */
-/* Data */
-static struct el_subpacket_handler *subpacket_handler_list = NULL;
-static struct el_subpacket_annotation *subpacket_annotation_list = NULL;
-
-static struct el_subpacket *
-el_process_header_subpacket(struct el_subpacket *header)
-{
-	union el_timestamp timestamp;
-	char *name = "UNKNOWN EVENT";
-	int packet_count = 0;
-	int length = 0;
-
-	if (header->class != EL_CLASS__HEADER) {
-		printk("%s** Unexpected header CLASS %d TYPE %d, aborting\n",
-		       err_print_prefix,
-		       header->class, header->type);
-		return NULL;
-	}
-
-	switch(header->type) {
-	case EL_TYPE__HEADER__SYSTEM_ERROR_FRAME:
-		name = "SYSTEM ERROR";
-		length = header->by_type.sys_err.frame_length;
-		packet_count = 
-			header->by_type.sys_err.frame_packet_count;
-		timestamp.as_int = 0;
-		break;
-	case EL_TYPE__HEADER__SYSTEM_EVENT_FRAME:
-		name = "SYSTEM EVENT";
-		length = header->by_type.sys_event.frame_length;
-		packet_count = 
-			header->by_type.sys_event.frame_packet_count;
-		timestamp = header->by_type.sys_event.timestamp;
-		break;
-	case EL_TYPE__HEADER__HALT_FRAME:
-		name = "ERROR HALT";
-		length = header->by_type.err_halt.frame_length;
-		packet_count = 
-			header->by_type.err_halt.frame_packet_count;
-		timestamp = header->by_type.err_halt.timestamp;
-		break;
-	case EL_TYPE__HEADER__LOGOUT_FRAME:
-		name = "LOGOUT FRAME";
-		length = header->by_type.logout_header.frame_length;
-		packet_count = 1;
-		timestamp.as_int = 0;
-		break;
-	default: /* Unknown */
-		printk("%s** Unknown header - CLASS %d TYPE %d, aborting\n",
-		       err_print_prefix,
-		       header->class, header->type);
-		return NULL;		
-	}
-
-	printk("%s*** %s:\n"
-	         "  CLASS %d, TYPE %d\n", 
-	       err_print_prefix,
-	       name,
-	       header->class, header->type);
-	el_print_timestamp(&timestamp);
-	
-	/*
-	 * Process the subpackets
-	 */
-	el_process_subpackets(header, packet_count);
-
-	/* return the next header */
-	header = (struct el_subpacket *)
-		((unsigned long)header + header->length + length);
-	return header;
-}
-
-static struct el_subpacket *
-el_process_subpacket_reg(struct el_subpacket *header)
-{
-	struct el_subpacket *next = NULL;
-	struct el_subpacket_handler *h = subpacket_handler_list;
-
-	for (; h && h->class != header->class; h = h->next);
-	if (h) next = h->handler(header);
-
-	return next;
-}
-
-void
-el_print_timestamp(union el_timestamp *timestamp)
-{
-	if (timestamp->as_int)
-		printk("%s  TIMESTAMP: %d/%d/%02d %d:%02d:%0d\n", 
-		       err_print_prefix,
-		       timestamp->b.month, timestamp->b.day,
-		       timestamp->b.year, timestamp->b.hour,
-		       timestamp->b.minute, timestamp->b.second);
-}
-
-void
-el_process_subpackets(struct el_subpacket *header, int packet_count)
-{
-	struct el_subpacket *subpacket;
-	int i;
-
-	subpacket = (struct el_subpacket *)
-		((unsigned long)header + header->length);
-
-	for (i = 0; subpacket && i < packet_count; i++) {
-		printk("%sPROCESSING SUBPACKET %d\n", err_print_prefix, i);
-		subpacket = el_process_subpacket(subpacket);
-	}
-}
-
-struct el_subpacket *
-el_process_subpacket(struct el_subpacket *header)
-{
-	struct el_subpacket *next = NULL;
-
-	switch(header->class) {
-	case EL_CLASS__TERMINATION:
-		/* Termination packet, there are no more */
-		break;
-	case EL_CLASS__HEADER: 
-		next = el_process_header_subpacket(header);
-		break;
-	default:
-		if (NULL == (next = el_process_subpacket_reg(header))) {
-			printk("%s** Unexpected header CLASS %d TYPE %d"
-			       " -- aborting.\n",
-			       err_print_prefix,
-			       header->class, header->type);
-		}
-		break;
-	}
-
-	return next;
-}
-
-void 
-el_annotate_subpacket(struct el_subpacket *header)
-{
-	struct el_subpacket_annotation *a;
-	char **annotation = NULL;
-
-	for (a = subpacket_annotation_list; a; a = a->next) {
-		if (a->class == header->class &&
-		    a->type == header->type &&
-		    a->revision == header->revision) {
-			/*
-			 * We found the annotation
-			 */
-			annotation = a->annotation;
-			printk("%s  %s\n", err_print_prefix, a->description);
-			break;
-		}
-	}
-
-	mchk_dump_mem(header, header->length, annotation);
-}
-
-static void __init
-cdl_process_console_data_log(int cpu, struct percpu_struct *pcpu)
-{
-	struct el_subpacket *header = (struct el_subpacket *)
-		(IDENT_ADDR | pcpu->console_data_log_pa);
-	int err;
-
-	printk("%s******* CONSOLE DATA LOG FOR CPU %d. *******\n"
-	         "*** Error(s) were logged on a previous boot\n",
-	       err_print_prefix, cpu);
-	
-	for (err = 0; header && (header->class != EL_CLASS__TERMINATION); err++)
-		header = el_process_subpacket(header);
-
-	/* let the console know it's ok to clear the error(s) at restart */
-	pcpu->console_data_log_pa = 0;
-
-	printk("%s*** %d total error(s) logged\n"
-	         "**** END OF CONSOLE DATA LOG FOR CPU %d ****\n", 
-	       err_print_prefix, err, cpu);
-}
-
-void __init
-cdl_check_console_data_log(void)
-{
-	struct percpu_struct *pcpu;
-	unsigned long cpu;
-
-	for (cpu = 0; cpu < hwrpb->nr_processors; cpu++) {
-		pcpu = (struct percpu_struct *)
-			((unsigned long)hwrpb + hwrpb->processor_offset 
-			 + cpu * hwrpb->processor_size);
-		if (pcpu->console_data_log_pa)
-			cdl_process_console_data_log(cpu, pcpu);
-	}
-
-}
-
-int __init
-cdl_register_subpacket_annotation(struct el_subpacket_annotation *new)
-{
-	struct el_subpacket_annotation *a = subpacket_annotation_list;
-
-	if (a == NULL) subpacket_annotation_list = new;
-	else {
-		for (; a->next != NULL; a = a->next) {
-			if ((a->class == new->class && a->type == new->type) ||
-			    a == new) {
-				printk("Attempted to re-register "
-				       "subpacket annotation\n");
-				return -EINVAL;
-			}
-		}
-		a->next = new;
-	}
-	new->next = NULL;
-
-	return 0;
-}
-
-int __init
-cdl_register_subpacket_handler(struct el_subpacket_handler *new)
-{
-	struct el_subpacket_handler *h = subpacket_handler_list;
-
-	if (h == NULL) subpacket_handler_list = new;
-	else {
-		for (; h->next != NULL; h = h->next) {
-			if (h->class == new->class || h == new) {
-				printk("Attempted to re-register "
-				       "subpacket handler\n");
-				return -EINVAL;
-			}
-		}
-		h->next = new;
-	}
-	new->next = NULL;
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/err_ev6.c b/ANDROID_3.4.5/arch/alpha/kernel/err_ev6.c
deleted file mode 100644
index 253cf1a8..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/err_ev6.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/err_ev6.c
- *
- *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- *	Error handling code supporting Alpha systems
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/irq_regs.h>
-#include <asm/hwrpb.h>
-#include <asm/smp.h>
-#include <asm/err_common.h>
-#include <asm/err_ev6.h>
-
-#include "err_impl.h"
-#include "proto.h"
-
-static int
-ev6_parse_ibox(u64 i_stat, int print)
-{
-	int status = MCHK_DISPOSITION_REPORT;
-
-#define EV6__I_STAT__PAR	(1UL << 29)
-#define EV6__I_STAT__ERRMASK	(EV6__I_STAT__PAR)
-
-	if (!(i_stat & EV6__I_STAT__ERRMASK))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	if (!print)
-		return status;
-
-	if (i_stat & EV6__I_STAT__PAR)
-		printk("%s    Icache parity error\n", err_print_prefix);
-
-	return status;
-}
-
-static int
-ev6_parse_mbox(u64 mm_stat, u64 d_stat, u64 c_stat, int print)
-{
-	int status = MCHK_DISPOSITION_REPORT;
-
-#define EV6__MM_STAT__DC_TAG_PERR	(1UL << 10)
-#define EV6__MM_STAT__ERRMASK		(EV6__MM_STAT__DC_TAG_PERR)
-#define EV6__D_STAT__TPERR_P0		(1UL << 0)
-#define EV6__D_STAT__TPERR_P1		(1UL << 1)
-#define EV6__D_STAT__ECC_ERR_ST		(1UL << 2)
-#define EV6__D_STAT__ECC_ERR_LD		(1UL << 3)
-#define EV6__D_STAT__SEO		(1UL << 4)
-#define EV6__D_STAT__ERRMASK		(EV6__D_STAT__TPERR_P0 |	\
-                                         EV6__D_STAT__TPERR_P1 | 	\
-                                         EV6__D_STAT__ECC_ERR_ST | 	\
-                                         EV6__D_STAT__ECC_ERR_LD | 	\
-                                         EV6__D_STAT__SEO)
-
-	if (!(d_stat & EV6__D_STAT__ERRMASK) && 
-	    !(mm_stat & EV6__MM_STAT__ERRMASK))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	if (!print)
-		return status;
-
-	if (mm_stat & EV6__MM_STAT__DC_TAG_PERR)
-		printk("%s    Dcache tag parity error on probe\n",
-		       err_print_prefix);
-	if (d_stat & EV6__D_STAT__TPERR_P0)
-		printk("%s    Dcache tag parity error - pipe 0\n",
-		       err_print_prefix);
-	if (d_stat & EV6__D_STAT__TPERR_P1)
-		printk("%s    Dcache tag parity error - pipe 1\n",
-		       err_print_prefix);
-	if (d_stat & EV6__D_STAT__ECC_ERR_ST)
-		printk("%s    ECC error occurred on a store\n", 
-		       err_print_prefix);
-	if (d_stat & EV6__D_STAT__ECC_ERR_LD)
-		printk("%s    ECC error occurred on a %s load\n",
-		       err_print_prefix,
-		       c_stat ? "" : "speculative ");
-	if (d_stat & EV6__D_STAT__SEO)
-		printk("%s    Dcache second error\n", err_print_prefix);
-
-	return status;
-}
-
-static int
-ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn, 
-	       u64 c_stat, u64 c_sts, int print)
-{
-	static const char * const sourcename[] = {
-		"UNKNOWN", "UNKNOWN", "UNKNOWN",
-		"MEMORY", "BCACHE", "DCACHE",
-		"BCACHE PROBE", "BCACHE PROBE"
-	};
-	static const char * const streamname[] = { "D", "I" };
-	static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
-	int status = MCHK_DISPOSITION_REPORT;
-	int source = -1, stream = -1, bits = -1;
-
-#define EV6__C_STAT__BC_PERR		(0x01)
-#define EV6__C_STAT__DC_PERR		(0x02)
-#define EV6__C_STAT__DSTREAM_MEM_ERR	(0x03)
-#define EV6__C_STAT__DSTREAM_BC_ERR	(0x04)
-#define EV6__C_STAT__DSTREAM_DC_ERR	(0x05)
-#define EV6__C_STAT__PROBE_BC_ERR0	(0x06)	/* both 6 and 7 indicate... */
-#define EV6__C_STAT__PROBE_BC_ERR1	(0x07)	/* ...probe bc error.       */
-#define EV6__C_STAT__ISTREAM_MEM_ERR	(0x0B)
-#define EV6__C_STAT__ISTREAM_BC_ERR	(0x0C)
-#define EV6__C_STAT__DSTREAM_MEM_DBL	(0x13)
-#define EV6__C_STAT__DSTREAM_BC_DBL	(0x14)
-#define EV6__C_STAT__ISTREAM_MEM_DBL	(0x1B)
-#define EV6__C_STAT__ISTREAM_BC_DBL	(0x1C)
-#define EV6__C_STAT__SOURCE_MEMORY	(0x03)
-#define EV6__C_STAT__SOURCE_BCACHE	(0x04)
-#define EV6__C_STAT__SOURCE__S		(0)
-#define EV6__C_STAT__SOURCE__M 		(0x07)
-#define EV6__C_STAT__ISTREAM__S		(3)
-#define EV6__C_STAT__ISTREAM__M		(0x01)
-#define EV6__C_STAT__DOUBLE__S		(4)
-#define EV6__C_STAT__DOUBLE__M		(0x01)
-#define EV6__C_STAT__ERRMASK		(0x1F)
-#define EV6__C_STS__SHARED		(1 << 0)
-#define EV6__C_STS__DIRTY		(1 << 1)
-#define EV6__C_STS__VALID		(1 << 2)
-#define EV6__C_STS__PARITY		(1 << 3)
-
-	if (!(c_stat & EV6__C_STAT__ERRMASK))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	if (!print)
-		return status;
-
-	source = EXTRACT(c_stat, EV6__C_STAT__SOURCE);
-	stream = EXTRACT(c_stat, EV6__C_STAT__ISTREAM);
-	bits = EXTRACT(c_stat, EV6__C_STAT__DOUBLE);
-
-	if (c_stat & EV6__C_STAT__BC_PERR) {
-		printk("%s    Bcache tag parity error\n", err_print_prefix);
-		source = -1;
-	}
-
-	if (c_stat & EV6__C_STAT__DC_PERR) {
-		printk("%s    Dcache tag parity error\n", err_print_prefix);
-		source = -1;
-	}
-
-	if (c_stat == EV6__C_STAT__PROBE_BC_ERR0 ||
-	    c_stat == EV6__C_STAT__PROBE_BC_ERR1) {
-		printk("%s    Bcache single-bit error on a probe hit\n",
-		       err_print_prefix);
-		source = -1;
-	}
-
-	if (source != -1) 
-		printk("%s    %s-STREAM %s-BIT ECC error from %s\n",
-		       err_print_prefix,
-		       streamname[stream], bitsname[bits], sourcename[source]);
-
-	printk("%s    Address: 0x%016llx\n"
-	         "    Syndrome[upper.lower]: %02llx.%02llx\n",
-	       err_print_prefix,
-	       c_addr,
-	       c2_syn, c1_syn);
-
-	if (source == EV6__C_STAT__SOURCE_MEMORY ||
-	    source == EV6__C_STAT__SOURCE_BCACHE) 
-		printk("%s    Block status: %s%s%s%s\n",
-		       err_print_prefix,
-		       (c_sts & EV6__C_STS__SHARED) ? "SHARED " : "",
-		       (c_sts & EV6__C_STS__DIRTY)  ? "DIRTY "  : "",
-		       (c_sts & EV6__C_STS__VALID)  ? "VALID "  : "",
-		       (c_sts & EV6__C_STS__PARITY) ? "PARITY " : "");
-		
-	return status;
-}
-
-void
-ev6_register_error_handlers(void)
-{
-	/* None right now. */
-}
-
-int
-ev6_process_logout_frame(struct el_common *mchk_header, int print)
-{
-	struct el_common_EV6_mcheck *ev6mchk = 
-		(struct el_common_EV6_mcheck *)mchk_header;
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	status |= ev6_parse_ibox(ev6mchk->I_STAT, print);
-	status |= ev6_parse_mbox(ev6mchk->MM_STAT, ev6mchk->DC_STAT, 
-				 ev6mchk->C_STAT, print);
-	status |= ev6_parse_cbox(ev6mchk->C_ADDR, ev6mchk->DC1_SYNDROME,
-				 ev6mchk->DC0_SYNDROME, ev6mchk->C_STAT,
-				 ev6mchk->C_STS, print);
-
-	if (!print)
-		return status;
-
-	if (status != MCHK_DISPOSITION_DISMISS) {
-		char *saved_err_prefix = err_print_prefix;
-
-		/*
-		 * Dump some additional information from the frame
-		 */
-		printk("%s    EXC_ADDR: 0x%016lx   IER_CM: 0x%016lx"
-		            "   ISUM: 0x%016lx\n"
-		         "    PAL_BASE: 0x%016lx   I_CTL:  0x%016lx"
-		            "   PCTX: 0x%016lx\n",
-		       err_print_prefix,
-		       ev6mchk->EXC_ADDR, ev6mchk->IER_CM, ev6mchk->ISUM,
-		       ev6mchk->PAL_BASE, ev6mchk->I_CTL, ev6mchk->PCTX);
-
-		if (status == MCHK_DISPOSITION_UNKNOWN_ERROR) {
-			printk("%s    UNKNOWN error, frame follows:\n",
-			       err_print_prefix);
-		} else {
-			/* had decode -- downgrade print level for frame */
-			err_print_prefix = KERN_NOTICE;
-		}
-
-		mchk_dump_logout_frame(mchk_header);
-
-		err_print_prefix = saved_err_prefix;
-	}
-
-	return status;
-}
-
-void
-ev6_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header = (struct el_common *)la_ptr;
-
-	/*
-	 * Sync the processor
-	 */
-	mb();
-	draina();
-
-	/*
-	 * Parse the logout frame without printing first. If the only error(s)
-	 * found are have a disposition of "dismiss", then just dismiss them
-	 * and don't print any message
-	 */
-	if (ev6_process_logout_frame(mchk_header, 0) != 
-	    MCHK_DISPOSITION_DISMISS) {
-		char *saved_err_prefix = err_print_prefix;
-		err_print_prefix = KERN_CRIT;
-
-		/*
-		 * Either a nondismissable error was detected or no
-		 * recognized error was detected  in the logout frame 
-		 * -- report the error in either case
-		 */
-		printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d:\n", 
-		       err_print_prefix,
-		       (vector == SCB_Q_PROCERR)?"Correctable":"Uncorrectable",
-		       (unsigned int)vector, (int)smp_processor_id());
-		
-		ev6_process_logout_frame(mchk_header, 1);
-		dik_show_regs(get_irq_regs(), NULL);
-
-		err_print_prefix = saved_err_prefix;
-	}
-
-	/* 
-	 * Release the logout frame 
-	 */
-	wrmces(0x7);
-	mb();
-}
-
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/err_ev7.c b/ANDROID_3.4.5/arch/alpha/kernel/err_ev7.c
deleted file mode 100644
index d738a671..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/err_ev7.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/err_ev7.c
- *
- *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- *	Error handling code supporting Alpha systems
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/hwrpb.h>
-#include <asm/smp.h>
-#include <asm/err_common.h>
-#include <asm/err_ev7.h>
-
-#include "err_impl.h"
-#include "proto.h"
-
-struct ev7_lf_subpackets *
-ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
-				    struct ev7_lf_subpackets *lf_subpackets)
-{
-	struct el_subpacket *subpacket;
-	int i;
-
-	/*
-	 * A Marvel machine check frame is always packaged in an
-	 * el_subpacket of class HEADER, type LOGOUT_FRAME.
-	 */
-	if (el_ptr->class != EL_CLASS__HEADER || 
-	    el_ptr->type != EL_TYPE__HEADER__LOGOUT_FRAME)
-		return NULL;
-
-	/*
-	 * It is a logout frame header. Look at the one subpacket.
-	 */
-	el_ptr = (struct el_subpacket *)
-		((unsigned long)el_ptr + el_ptr->length);
-
-	/*
-	 * It has to be class PAL, type LOGOUT_FRAME.
-	 */
-	if (el_ptr->class != EL_CLASS__PAL ||
-	    el_ptr->type != EL_TYPE__PAL__LOGOUT_FRAME)
-		return NULL;
-
-	lf_subpackets->logout = (struct ev7_pal_logout_subpacket *)
-		el_ptr->by_type.raw.data_start;
-
-	/*
-	 * Process the subpackets.
-	 */
-	subpacket = (struct el_subpacket *)
-		((unsigned long)el_ptr + el_ptr->length);
-	for (i = 0;
-	     subpacket && i < lf_subpackets->logout->subpacket_count;
-	     subpacket = (struct el_subpacket *)
-		     ((unsigned long)subpacket + subpacket->length), i++) {
-		/*
-		 * All subpackets should be class PAL.
-		 */
-		if (subpacket->class != EL_CLASS__PAL) {
-			printk("%s**UNEXPECTED SUBPACKET CLASS %d "
-			       "IN LOGOUT FRAME (packet %d\n",
-			       err_print_prefix, subpacket->class, i);
-			return NULL;
-		}
-
-		/*
-		 * Remember the subpacket.
-		 */
-		switch(subpacket->type) {
-		case EL_TYPE__PAL__EV7_PROCESSOR:
-			lf_subpackets->ev7 =
-				(struct ev7_pal_processor_subpacket *)
-				subpacket->by_type.raw.data_start;
-			break;
-
-		case EL_TYPE__PAL__EV7_RBOX:
-			lf_subpackets->rbox = (struct ev7_pal_rbox_subpacket *)
-				subpacket->by_type.raw.data_start;
-			break;
-
-		case EL_TYPE__PAL__EV7_ZBOX:
-			lf_subpackets->zbox = (struct ev7_pal_zbox_subpacket *)
-				subpacket->by_type.raw.data_start;
-			break;
-
-		case EL_TYPE__PAL__EV7_IO:
-			lf_subpackets->io = (struct ev7_pal_io_subpacket *)
-				subpacket->by_type.raw.data_start;
-			break;
-
-		case EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE:
-		case EL_TYPE__PAL__ENV__AIRMOVER_FAN:
-		case EL_TYPE__PAL__ENV__VOLTAGE:
-		case EL_TYPE__PAL__ENV__INTRUSION:
-		case EL_TYPE__PAL__ENV__POWER_SUPPLY:
-		case EL_TYPE__PAL__ENV__LAN:
-		case EL_TYPE__PAL__ENV__HOT_PLUG:
-			lf_subpackets->env[ev7_lf_env_index(subpacket->type)] =
- 				(struct ev7_pal_environmental_subpacket *)
-				subpacket->by_type.raw.data_start;
-			break;
-				
-		default:
-			/*
-			 * Don't know what kind of frame this is.
-			 */
-			return NULL;
-		}
-	}
-
-	return lf_subpackets;
-}
-
-void
-ev7_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
-	char *saved_err_prefix = err_print_prefix;
-
-	/*
-	 * Sync the processor
-	 */
-	mb();
-	draina();
-
-	err_print_prefix = KERN_CRIT;
-	printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d\n",
-	       err_print_prefix, 
-	       (vector == SCB_Q_PROCERR) ? "Correctable" : "Uncorrectable",
-	       (unsigned int)vector, (int)smp_processor_id());
-	el_process_subpacket(el_ptr);
-	err_print_prefix = saved_err_prefix;
-
-	/* 
-	 * Release the logout frame 
-	 */
-	wrmces(0x7);
-	mb();
-}
-
-static char *el_ev7_processor_subpacket_annotation[] = {
-	"Subpacket Header",	"I_STAT",	"DC_STAT",
-	"C_ADDR",		"C_SYNDROME_1",	"C_SYNDROME_0",
-	"C_STAT",		"C_STS",	"MM_STAT",
-	"EXC_ADDR",		"IER_CM",	"ISUM",
-	"PAL_BASE",		"I_CTL",	"PROCESS_CONTEXT",
-	"CBOX_CTL",		"CBOX_STP_CTL",	"CBOX_ACC_CTL",
-	"CBOX_LCL_SET",		"CBOX_GLB_SET",	"BBOX_CTL",
-	"BBOX_ERR_STS",		"BBOX_ERR_IDX",	"CBOX_DDP_ERR_STS",
-	"BBOX_DAT_RMP",		NULL
-};
-
-static char *el_ev7_zbox_subpacket_annotation[] = {
-	"Subpacket Header", 	
-	"ZBOX(0): DRAM_ERR_STATUS_2 / DRAM_ERR_STATUS_1",
-	"ZBOX(0): DRAM_ERROR_CTL    / DRAM_ERR_STATUS_3",
-	"ZBOX(0): DIFT_TIMEOUT      / DRAM_ERR_ADR",
-	"ZBOX(0): FRC_ERR_ADR       / DRAM_MAPPER_CTL",
-	"ZBOX(0): reserved          / DIFT_ERR_STATUS",
-	"ZBOX(1): DRAM_ERR_STATUS_2 / DRAM_ERR_STATUS_1",
-	"ZBOX(1): DRAM_ERROR_CTL    / DRAM_ERR_STATUS_3",
-	"ZBOX(1): DIFT_TIMEOUT      / DRAM_ERR_ADR",
-	"ZBOX(1): FRC_ERR_ADR       / DRAM_MAPPER_CTL",
-	"ZBOX(1): reserved          / DIFT_ERR_STATUS",
-	"CBOX_CTL",		"CBOX_STP_CTL",
-	"ZBOX(0)_ERROR_PA",	"ZBOX(1)_ERROR_PA",
-	"ZBOX(0)_ORED_SYNDROME","ZBOX(1)_ORED_SYNDROME",
-	NULL
-};
-
-static char *el_ev7_rbox_subpacket_annotation[] = {
-	"Subpacket Header",	"RBOX_CFG",	"RBOX_N_CFG",
-	"RBOX_S_CFG",		"RBOX_E_CFG",	"RBOX_W_CFG",
-	"RBOX_N_ERR",		"RBOX_S_ERR",	"RBOX_E_ERR",
-	"RBOX_W_ERR",		"RBOX_IO_CFG",	"RBOX_IO_ERR",
-	"RBOX_L_ERR",		"RBOX_WHOAMI",	"RBOX_IMASL",
-	"RBOX_INTQ",		"RBOX_INT",	NULL
-};
-
-static char *el_ev7_io_subpacket_annotation[] = {
-	"Subpacket Header",	"IO_ASIC_REV",	"IO_SYS_REV",
-	"IO7_UPH",		"HPI_CTL",	"CRD_CTL",
-	"HEI_CTL",		"PO7_ERROR_SUM","PO7_UNCRR_SYM",
-	"PO7_CRRCT_SYM",	"PO7_UGBGE_SYM","PO7_ERR_PKT0",
-	"PO7_ERR_PKT1",		"reserved",	"reserved",
-	"PO0_ERR_SUM",		"PO0_TLB_ERR",	"PO0_SPL_COMPLT",
-	"PO0_TRANS_SUM",	"PO0_FIRST_ERR","PO0_MULT_ERR",
-	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
-	"DM CSR PH",		"reserved",
-	"PO1_ERR_SUM",		"PO1_TLB_ERR",	"PO1_SPL_COMPLT",
-	"PO1_TRANS_SUM",	"PO1_FIRST_ERR","PO1_MULT_ERR",
-	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
-	"DM CSR PH",		"reserved",
-	"PO2_ERR_SUM",		"PO2_TLB_ERR",	"PO2_SPL_COMPLT",
-	"PO2_TRANS_SUM",	"PO2_FIRST_ERR","PO2_MULT_ERR",
-	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
-	"DM CSR PH",		"reserved",
-	"PO3_ERR_SUM",		"PO3_TLB_ERR",	"PO3_SPL_COMPLT",
-	"PO3_TRANS_SUM",	"PO3_FIRST_ERR","PO3_MULT_ERR",
-	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
-	"DM CSR PH",		"reserved",	
-	NULL
-};
-	
-static struct el_subpacket_annotation el_ev7_pal_annotations[] = {
-	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
-			     EL_TYPE__PAL__EV7_PROCESSOR,
-			     1,
-			     "EV7 Processor Subpacket",
-			     el_ev7_processor_subpacket_annotation),
-	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
-			     EL_TYPE__PAL__EV7_ZBOX,
-			     1,
-			     "EV7 ZBOX Subpacket",
-			     el_ev7_zbox_subpacket_annotation),
-	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
-			     EL_TYPE__PAL__EV7_RBOX,
-			     1,
-			     "EV7 RBOX Subpacket",
-			     el_ev7_rbox_subpacket_annotation),
-	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
-			     EL_TYPE__PAL__EV7_IO,
-			     1,
-			     "EV7 IO Subpacket",
-			     el_ev7_io_subpacket_annotation)
-};
-
-static struct el_subpacket *
-ev7_process_pal_subpacket(struct el_subpacket *header)
-{
-	struct ev7_pal_subpacket *packet;
-
-	if (header->class != EL_CLASS__PAL) {
-		printk("%s  ** Unexpected header CLASS %d TYPE %d, aborting\n",
-		       err_print_prefix,
-		       header->class, header->type);
-		return NULL;
-	}
-
-	packet = (struct ev7_pal_subpacket *)header->by_type.raw.data_start;
-
-	switch(header->type) {
-	case EL_TYPE__PAL__LOGOUT_FRAME:
-		printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
-		       err_print_prefix,
-		       packet->by_type.logout.whami, 
-		       packet->by_type.logout.rbox_whami);
-		el_print_timestamp(&packet->by_type.logout.timestamp);
-		printk("%s  EXC_ADDR: %016llx\n"
-		         "  HALT_CODE: %llx\n",
-		       err_print_prefix,
-		       packet->by_type.logout.exc_addr,
-		       packet->by_type.logout.halt_code);
-		el_process_subpackets(header,
-                                      packet->by_type.logout.subpacket_count);
-		break;
-	default:
-		printk("%s  ** PAL TYPE %d SUBPACKET\n", 
-		       err_print_prefix,
-		       header->type);
-		el_annotate_subpacket(header);
-		break;
-	}
-	
-	return (struct el_subpacket *)((unsigned long)header + header->length);
-}
-
-struct el_subpacket_handler ev7_pal_subpacket_handler =
-	SUBPACKET_HANDLER_INIT(EL_CLASS__PAL, ev7_process_pal_subpacket);
-
-void __init
-ev7_register_error_handlers(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(el_ev7_pal_annotations); i++)
-		cdl_register_subpacket_annotation(&el_ev7_pal_annotations[i]);
-
-	cdl_register_subpacket_handler(&ev7_pal_subpacket_handler);
-}
-
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/err_impl.h b/ANDROID_3.4.5/arch/alpha/kernel/err_impl.h
deleted file mode 100644
index ae529c41..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/err_impl.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/err_impl.h
- *
- *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- *	Contains declarations and macros to support Alpha error handling
- * 	implementations.
- */
-
-#include <asm/mce.h>
-
-union el_timestamp;
-struct el_subpacket;
-struct ev7_lf_subpackets;
-
-struct el_subpacket_annotation {
-	struct el_subpacket_annotation *next;
-	u16 class;
-	u16 type;
-	u16 revision;
-	char *description;
-	char **annotation;
-};
-#define SUBPACKET_ANNOTATION(c, t, r, d, a) {NULL, (c), (t), (r), (d), (a)}
-
-struct el_subpacket_handler {
-	struct el_subpacket_handler *next;
-	u16 class;
-	struct el_subpacket *(*handler)(struct el_subpacket *);
-};
-#define SUBPACKET_HANDLER_INIT(c, h) {NULL, (c), (h)}
-
-/*
- * Manipulate a field from a register given it's name. defines
- * for the LSB (__S - shift count) and bitmask (__M) are required
- *
- * EXTRACT(u, f) - extracts the field and places it at bit position 0
- * GEN_MASK(f) - creates an in-position mask for the field
- */
-#define EXTRACT(u, f) (((u) >> f##__S) & f##__M)
-#define GEN_MASK(f) ((u64)f##__M << f##__S)
-
-/*
- * err_common.c
- */
-extern char *err_print_prefix;
-
-extern void mchk_dump_mem(void *, size_t, char **);
-extern void mchk_dump_logout_frame(struct el_common *);
-extern void el_print_timestamp(union el_timestamp *);
-extern void el_process_subpackets(struct el_subpacket *, int);
-extern struct el_subpacket *el_process_subpacket(struct el_subpacket *);
-extern void el_annotate_subpacket(struct el_subpacket *);
-extern void cdl_check_console_data_log(void);
-extern int cdl_register_subpacket_annotation(struct el_subpacket_annotation *);
-extern int cdl_register_subpacket_handler(struct el_subpacket_handler *);
-
-/*
- * err_ev7.c
- */
-extern struct ev7_lf_subpackets *
-ev7_collect_logout_frame_subpackets(struct el_subpacket *,
-				    struct ev7_lf_subpackets *);
-extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(unsigned long, unsigned long);
-
-/*
- * err_ev6.c
- */
-extern void ev6_register_error_handlers(void);
-extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(unsigned long, unsigned long);
-
-/*
- * err_marvel.c
- */
-extern void marvel_machine_check(unsigned long, unsigned long);
-extern void marvel_register_error_handlers(void);
-
-/*
- * err_titan.c
- */
-extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(unsigned long, unsigned long);
-extern void titan_register_error_handlers(void);
-extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(unsigned long, unsigned long);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/err_marvel.c b/ANDROID_3.4.5/arch/alpha/kernel/err_marvel.c
deleted file mode 100644
index ae54ad91..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/err_marvel.c
+++ /dev/null
@@ -1,1160 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/err_marvel.c
- *
- *	Copyright (C) 2001 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/console.h>
-#include <asm/core_marvel.h>
-#include <asm/hwrpb.h>
-#include <asm/smp.h>
-#include <asm/err_common.h>
-#include <asm/err_ev7.h>
-
-#include "err_impl.h"
-#include "proto.h"
-
-static void
-marvel_print_680_frame(struct ev7_lf_subpackets *lf_subpackets)
-{
-#ifdef CONFIG_VERBOSE_MCHECK
-	struct ev7_pal_environmental_subpacket *env;
-	struct { int type; char *name; } ev_packets[] = {
-		{ EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE,
-		  "Ambient Temperature" },
-		{ EL_TYPE__PAL__ENV__AIRMOVER_FAN,
-		  "AirMover / Fan" },
-		{ EL_TYPE__PAL__ENV__VOLTAGE,
-		  "Voltage" },
-		{ EL_TYPE__PAL__ENV__INTRUSION,
-		  "Intrusion" },
-		{ EL_TYPE__PAL__ENV__POWER_SUPPLY,
-		  "Power Supply" },
-		{ EL_TYPE__PAL__ENV__LAN,
-		  "LAN" },
-		{ EL_TYPE__PAL__ENV__HOT_PLUG,
-		  "Hot Plug" },
-		{ 0, NULL }
-	};
-	int i;
-
-	for (i = 0; ev_packets[i].type != 0; i++) {
-		env = lf_subpackets->env[ev7_lf_env_index(ev_packets[i].type)];
-		if (!env)
-			continue;
-
-		printk("%s**%s event (cabinet %d, drawer %d)\n",
-		       err_print_prefix,
-		       ev_packets[i].name,
-		       env->cabinet,
-		       env->drawer);
-		printk("%s   Module Type: 0x%x - Unit ID 0x%x - "
-		       "Condition 0x%x\n",
-		       err_print_prefix,
-		       env->module_type,
-		       env->unit_id,
-		       env->condition);
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-static int
-marvel_process_680_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
-{
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-	int i;
-
-	for (i = ev7_lf_env_index(EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE);
-	     i <= ev7_lf_env_index(EL_TYPE__PAL__ENV__HOT_PLUG);
-	     i++) {
-		if (lf_subpackets->env[i])
-			status = MCHK_DISPOSITION_REPORT;
-	}
-
-	if (print)
-		marvel_print_680_frame(lf_subpackets);
-
-	return status;
-}
-
-#ifdef CONFIG_VERBOSE_MCHECK
-
-static void
-marvel_print_err_cyc(u64 err_cyc)
-{
-	static char *packet_desc[] = {
-		"No Error",
-		"UNKNOWN",
-		"1 cycle (1 or 2 flit packet)",
-		"2 cycles (3 flit packet)",
-		"9 cycles (18 flit packet)",
-		"10 cycles (19 flit packet)",
-		"UNKNOWN",
-		"UNKNOWN",
-		"UNKNOWN"
-	};
-
-#define IO7__ERR_CYC__ODD_FLT	(1UL <<  0)
-#define IO7__ERR_CYC__EVN_FLT	(1UL <<  1)
-#define IO7__ERR_CYC__PACKET__S	(6)
-#define IO7__ERR_CYC__PACKET__M	(0x7)
-#define IO7__ERR_CYC__LOC	(1UL <<  5)
-#define IO7__ERR_CYC__CYCLE__S	(2)
-#define IO7__ERR_CYC__CYCLE__M	(0x7)
-
-	printk("%s        Packet In Error: %s\n"
-	       "%s        Error in %s, cycle %lld%s%s\n",
-	       err_print_prefix, 
-	       packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)],
-	       err_print_prefix,
-	       (err_cyc & IO7__ERR_CYC__LOC) ? "DATA" : "HEADER",
-	       EXTRACT(err_cyc, IO7__ERR_CYC__CYCLE),
-	       (err_cyc & IO7__ERR_CYC__ODD_FLT) ? " [ODD Flit]": "",
-	       (err_cyc & IO7__ERR_CYC__EVN_FLT) ? " [Even Flit]": "");
-}
-
-static void
-marvel_print_po7_crrct_sym(u64 crrct_sym)
-{
-#define IO7__PO7_CRRCT_SYM__SYN__S	(0)
-#define IO7__PO7_CRRCT_SYM__SYN__M	(0x7f)
-#define IO7__PO7_CRRCT_SYM__ERR_CYC__S	(7)   /* ERR_CYC + ODD_FLT + EVN_FLT */
-#define IO7__PO7_CRRCT_SYM__ERR_CYC__M	(0x1ff)
-
-
-	printk("%s      Correctable Error Symptoms:\n"
-	       "%s        Syndrome: 0x%llx\n",
-	       err_print_prefix,
-	       err_print_prefix, EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__SYN));
-	marvel_print_err_cyc(EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__ERR_CYC));
-}
-
-static void
-marvel_print_po7_uncrr_sym(u64 uncrr_sym, u64 valid_mask)
-{
-	static char *clk_names[] = { "_h[0]", "_h[1]", "_n[0]", "_n[1]" };
-	static char *clk_decode[] = {
-		"No Error",
-		"One extra rising edge",
-		"Two extra rising edges",
-		"Lost one clock"
-	};
-	static char *port_names[] = { "Port 0", 	"Port 1", 
-				      "Port 2", 	"Port 3",
-				      "Unknown Port",	"Unknown Port",
-				      "Unknown Port",	"Port 7" };
-	int scratch, i;
-
-#define IO7__PO7_UNCRR_SYM__SYN__S	    (0)
-#define IO7__PO7_UNCRR_SYM__SYN__M	    (0x7f)
-#define IO7__PO7_UNCRR_SYM__ERR_CYC__S	    (7)      /* ERR_CYC + ODD_FLT... */
-#define IO7__PO7_UNCRR_SYM__ERR_CYC__M	    (0x1ff)  /* ... + EVN_FLT        */
-#define IO7__PO7_UNCRR_SYM__CLK__S	    (16)
-#define IO7__PO7_UNCRR_SYM__CLK__M	    (0xff)
-#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__REQ (1UL << 24)
-#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__RIO (1UL << 25)
-#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__WIO (1UL << 26)
-#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__BLK (1UL << 27)
-#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__NBK (1UL << 28)
-#define IO7__PO7_UNCRR_SYM__OVF__READIO	    (1UL << 29)
-#define IO7__PO7_UNCRR_SYM__OVF__WRITEIO    (1UL << 30)
-#define IO7__PO7_UNCRR_SYM__OVF__FWD        (1UL << 31)
-#define IO7__PO7_UNCRR_SYM__VICTIM_SP__S    (32)
-#define IO7__PO7_UNCRR_SYM__VICTIM_SP__M    (0xff)
-#define IO7__PO7_UNCRR_SYM__DETECT_SP__S    (40)
-#define IO7__PO7_UNCRR_SYM__DETECT_SP__M    (0xff)
-#define IO7__PO7_UNCRR_SYM__STRV_VTR__S     (48)
-#define IO7__PO7_UNCRR_SYM__STRV_VTR__M     (0x3ff)
-
-#define IO7__STRV_VTR__LSI__INTX__S	    (0)
-#define IO7__STRV_VTR__LSI__INTX__M	    (0x3)
-#define IO7__STRV_VTR__LSI__SLOT__S	    (2)
-#define IO7__STRV_VTR__LSI__SLOT__M	    (0x7)
-#define IO7__STRV_VTR__LSI__BUS__S	    (5)
-#define IO7__STRV_VTR__LSI__BUS__M	    (0x3)
-#define IO7__STRV_VTR__MSI__INTNUM__S	    (0)
-#define IO7__STRV_VTR__MSI__INTNUM__M	    (0x1ff)
-#define IO7__STRV_VTR__IS_MSI		    (1UL << 9)
-
-	printk("%s      Uncorrectable Error Symptoms:\n", err_print_prefix);
-	uncrr_sym &= valid_mask;
-
-	if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__SYN))
-		printk("%s        Syndrome: 0x%llx\n",
-		       err_print_prefix, 
-		       EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__SYN));
-
-	if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__ERR_CYC))
-		marvel_print_err_cyc(EXTRACT(uncrr_sym, 
-					     IO7__PO7_UNCRR_SYM__ERR_CYC));
-
-	scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__CLK);
-	for (i = 0; i < 4; i++, scratch >>= 2) {
-		if (scratch & 0x3)
-			printk("%s        Clock %s: %s\n",
-			       err_print_prefix,
-			       clk_names[i], clk_decode[scratch & 0x3]);
-	}
-
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__REQ) 
-		printk("%s       REQ Credit Timeout or Overflow\n",
-		       err_print_prefix);
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__RIO) 
-		printk("%s       RIO Credit Timeout or Overflow\n",
-		       err_print_prefix);
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__WIO) 
-		printk("%s       WIO Credit Timeout or Overflow\n",
-		       err_print_prefix);
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__BLK) 
-		printk("%s       BLK Credit Timeout or Overflow\n",
-		       err_print_prefix);
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__NBK) 
-		printk("%s       NBK Credit Timeout or Overflow\n",
-		       err_print_prefix);
-
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__READIO) 
-		printk("%s       Read I/O Buffer Overflow\n", 
-		       err_print_prefix);
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__WRITEIO) 
-		printk("%s       Write I/O Buffer Overflow\n", 
-		       err_print_prefix);
-	if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__FWD) 
-		printk("%s       FWD Buffer Overflow\n", 
-		       err_print_prefix);
-
-	if ((scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__VICTIM_SP))) {
-		int lost = scratch & (1UL << 4);
-		scratch &= ~lost;
-		for (i = 0; i < 8; i++, scratch >>= 1) {
-			if (!(scratch & 1))
-				continue;
-			printk("%s        Error Response sent to %s",
-			       err_print_prefix, port_names[i]);
-		}
-		if (lost)
-			printk("%s        Lost Error sent somewhere else\n",
-			       err_print_prefix);
-	}
-	
-	if ((scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__DETECT_SP))) {
-		for (i = 0; i < 8; i++, scratch >>= 1) {
-			if (!(scratch & 1))
-				continue;
-			printk("%s        Error Reported by %s",
-			       err_print_prefix, port_names[i]);
-		}
-	}
-
-	if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__STRV_VTR)) {
-		char starvation_message[80];
-
-		scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__STRV_VTR);
-		if (scratch & IO7__STRV_VTR__IS_MSI) 
-			sprintf(starvation_message, 
-				"MSI Interrupt 0x%x",
-				EXTRACT(scratch, IO7__STRV_VTR__MSI__INTNUM));
-		else
-			sprintf(starvation_message,
-				"LSI INT%c for Bus:Slot (%d:%d)\n",
-				'A' + EXTRACT(scratch, 
-					      IO7__STRV_VTR__LSI__INTX),
-				EXTRACT(scratch, IO7__STRV_VTR__LSI__BUS),
-				EXTRACT(scratch, IO7__STRV_VTR__LSI__SLOT));
-
-		printk("%s        Starvation Int Trigger By: %s\n",
-		       err_print_prefix, starvation_message);
-	}
-}
-
-static void
-marvel_print_po7_ugbge_sym(u64 ugbge_sym)
-{
-	char opcode_str[10];
-
-#define IO7__PO7_UGBGE_SYM__UPH_PKT_OFF__S	(6)
-#define IO7__PO7_UGBGE_SYM__UPH_PKT_OFF__M	(0xfffffffful)
-#define IO7__PO7_UGBGE_SYM__UPH_OPCODE__S	(40)
-#define IO7__PO7_UGBGE_SYM__UPH_OPCODE__M	(0xff)
-#define IO7__PO7_UGBGE_SYM__UPH_SRC_PORT__S	(48)
-#define IO7__PO7_UGBGE_SYM__UPH_SRC_PORT__M	(0xf)
-#define IO7__PO7_UGBGE_SYM__UPH_DEST_PID__S	(52)
-#define IO7__PO7_UGBGE_SYM__UPH_DEST_PID__M	(0x7ff)
-#define IO7__PO7_UGBGE_SYM__VALID		(1UL << 63)
-
-	if (!(ugbge_sym & IO7__PO7_UGBGE_SYM__VALID))
-		return;
-
-	switch(EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE)) {
-	case 0x51:
-		sprintf(opcode_str, "Wr32");
-		break;
-	case 0x50:
-		sprintf(opcode_str, "WrQW");
-		break;
-	case 0x54:
-		sprintf(opcode_str, "WrIPR");
-		break;
-	case 0xD8:
-		sprintf(opcode_str, "Victim");
-		break;
-	case 0xC5:
-		sprintf(opcode_str, "BlkIO");
-		break;
-	default:
-		sprintf(opcode_str, "0x%llx\n",
-			EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE));
-		break;
-	}
-
-	printk("%s      Up Hose Garbage Symptom:\n"
-	       "%s        Source Port: %lld - Dest PID: %lld - OpCode: %s\n",
-	       err_print_prefix,
-	       err_print_prefix, 
-	       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT),
-	       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_DEST_PID),
-	       opcode_str);
-
-	if (0xC5 != EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE))
-		printk("%s        Packet Offset 0x%08llx\n",
-		       err_print_prefix,
-		       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_PKT_OFF));
-}
-
-static void
-marvel_print_po7_err_sum(struct ev7_pal_io_subpacket *io)
-{
-	u64	uncrr_sym_valid = 0;
-
-#define IO7__PO7_ERRSUM__CR_SBE		(1UL << 32)
-#define IO7__PO7_ERRSUM__CR_SBE2	(1UL << 33)
-#define IO7__PO7_ERRSUM__CR_PIO_WBYTE	(1UL << 34)
-#define IO7__PO7_ERRSUM__CR_CSR_NXM	(1UL << 35)
-#define IO7__PO7_ERRSUM__CR_RPID_ACV	(1UL << 36)
-#define IO7__PO7_ERRSUM__CR_RSP_NXM	(1UL << 37)
-#define IO7__PO7_ERRSUM__CR_ERR_RESP	(1UL << 38)
-#define IO7__PO7_ERRSUM__CR_CLK_DERR	(1UL << 39)
-#define IO7__PO7_ERRSUM__CR_DAT_DBE	(1UL << 40)
-#define IO7__PO7_ERRSUM__CR_DAT_GRBG	(1UL << 41)
-#define IO7__PO7_ERRSUM__MAF_TO		(1UL << 42)
-#define IO7__PO7_ERRSUM__UGBGE		(1UL << 43)
-#define IO7__PO7_ERRSUM__UN_MAF_LOST	(1UL << 44)
-#define IO7__PO7_ERRSUM__UN_PKT_OVF	(1UL << 45)
-#define IO7__PO7_ERRSUM__UN_CDT_OVF	(1UL << 46)
-#define IO7__PO7_ERRSUM__UN_DEALLOC	(1UL << 47)
-#define IO7__PO7_ERRSUM__BH_CDT_TO	(1UL << 51)
-#define IO7__PO7_ERRSUM__BH_CLK_HDR	(1UL << 52)
-#define IO7__PO7_ERRSUM__BH_DBE_HDR	(1UL << 53)
-#define IO7__PO7_ERRSUM__BH_GBG_HDR	(1UL << 54)
-#define IO7__PO7_ERRSUM__BH_BAD_CMD	(1UL << 55)
-#define IO7__PO7_ERRSUM__HLT_INT	(1UL << 56)
-#define IO7__PO7_ERRSUM__HP_INT		(1UL << 57)
-#define IO7__PO7_ERRSUM__CRD_INT	(1UL << 58)
-#define IO7__PO7_ERRSUM__STV_INT	(1UL << 59)
-#define IO7__PO7_ERRSUM__HRD_INT	(1UL << 60)
-#define IO7__PO7_ERRSUM__BH_SUM		(1UL << 61)
-#define IO7__PO7_ERRSUM__ERR_LST	(1UL << 62)
-#define IO7__PO7_ERRSUM__ERR_VALID	(1UL << 63)
-
-#define IO7__PO7_ERRSUM__ERR_MASK	(IO7__PO7_ERRSUM__ERR_VALID |	\
-					 IO7__PO7_ERRSUM__CR_SBE)
-
-	/*
-	 * Single bit errors aren't covered by ERR_VALID.
-	 */
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_SBE) {
-		printk("%s    %sSingle Bit Error(s) detected/corrected\n",
-		       err_print_prefix,
-		       (io->po7_error_sum & IO7__PO7_ERRSUM__CR_SBE2) 
-		       ? "Multiple " : "");
-		marvel_print_po7_crrct_sym(io->po7_crrct_sym);
-	}
-
-	/*
-	 * Neither are the interrupt status bits
-	 */
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__HLT_INT)
-		printk("%s    Halt Interrupt posted", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__HP_INT) {
-		printk("%s    Hot Plug Event Interrupt posted", 
-		       err_print_prefix);
-		uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__DETECT_SP);
-	}
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CRD_INT)
-		printk("%s    Correctable Error Interrupt posted", 
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__STV_INT) {
-		printk("%s    Starvation Interrupt posted", err_print_prefix);
-		uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__STRV_VTR);
-	}
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__HRD_INT) {
-		printk("%s    Hard Error Interrupt posted", err_print_prefix);
-		uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__DETECT_SP);
-	}
-
-	/*
-	 * Everything else is valid only with ERR_VALID, so skip to the end
-	 * (uncrr_sym check) unless ERR_VALID is set.
-	 */
-	if (!(io->po7_error_sum & IO7__PO7_ERRSUM__ERR_VALID)) 
-		goto check_uncrr_sym;
-
-	/*
-	 * Since ERR_VALID is set, VICTIM_SP in uncrr_sym is valid.
-	 * For bits [29:0] to also be valid, the following bits must
-	 * not be set:
-	 *	CR_PIO_WBYTE	CR_CSR_NXM	CR_RSP_NXM
-	 *	CR_ERR_RESP	MAF_TO
-	 */
-	uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__VICTIM_SP);
-	if (!(io->po7_error_sum & (IO7__PO7_ERRSUM__CR_PIO_WBYTE |
-				   IO7__PO7_ERRSUM__CR_CSR_NXM |
-				   IO7__PO7_ERRSUM__CR_RSP_NXM |
-				   IO7__PO7_ERRSUM__CR_ERR_RESP |
-				   IO7__PO7_ERRSUM__MAF_TO)))
-		uncrr_sym_valid |= 0x3ffffffful;
-
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_PIO_WBYTE)
-		printk("%s    Write byte into IO7 CSR\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_CSR_NXM)
-		printk("%s    PIO to non-existent CSR\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_RPID_ACV)
-		printk("%s    Bus Requester PID (Access Violation)\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_RSP_NXM)
-		printk("%s    Received NXM response from EV7\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_ERR_RESP)
-		printk("%s    Received ERROR RESPONSE\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_CLK_DERR)
-		printk("%s    Clock error on data flit\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_DAT_DBE)
-		printk("%s    Double Bit Error Data Error Detected\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_DAT_GRBG)
-		printk("%s    Garbage Encoding Detected on the data\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__UGBGE) {
-		printk("%s    Garbage Encoding sent up hose\n",
-		       err_print_prefix);
-		marvel_print_po7_ugbge_sym(io->po7_ugbge_sym);
-	}
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_MAF_LOST)
-		printk("%s    Orphan response (unexpected response)\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_PKT_OVF)
-		printk("%s    Down hose packet overflow\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_CDT_OVF)
-		printk("%s    Down hose credit overflow\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_DEALLOC)
-		printk("%s    Unexpected or bad dealloc field\n",
-		       err_print_prefix);
-
-	/*
-	 * The black hole events.
-	 */
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__MAF_TO)
-		printk("%s    BLACK HOLE: Timeout for all responses\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_CDT_TO)
-		printk("%s    BLACK HOLE: Credit Timeout\n", err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_CLK_HDR)
-		printk("%s    BLACK HOLE: Clock check on header\n", 
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_DBE_HDR)
-		printk("%s    BLACK HOLE: Uncorrectable Error on header\n",
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_GBG_HDR)
-		printk("%s    BLACK HOLE: Garbage on header\n", 
-		       err_print_prefix);
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_BAD_CMD)
-		printk("%s    BLACK HOLE: Bad EV7 command\n", 
-		       err_print_prefix);
-
-	if (io->po7_error_sum & IO7__PO7_ERRSUM__ERR_LST) 
-		printk("%s    Lost Error\n", err_print_prefix);
-
-	printk("%s    Failing Packet:\n"
-	       "%s      Cycle 1: %016llx\n"
-	       "%s      Cycle 2: %016llx\n",
-	       err_print_prefix,
-	       err_print_prefix, io->po7_err_pkt0,
-	       err_print_prefix, io->po7_err_pkt1);
-	/*
-	 * If there are any valid bits in UNCRR sym for this err, 
-	 * print UNCRR_SYM as well.
-	 */
-check_uncrr_sym:
-	if (uncrr_sym_valid)
-		marvel_print_po7_uncrr_sym(io->po7_uncrr_sym, uncrr_sym_valid);
-}
-
-static void
-marvel_print_pox_tlb_err(u64 tlb_err)
-{
-	static char *tlb_errors[] = {
-		"No Error",
-		"North Port Signaled Error fetching TLB entry",
-		"PTE invalid or UCC or GBG error on this entry",
-		"Address did not hit any DMA window"
-	};
-
-#define IO7__POX_TLBERR__ERR_VALID		(1UL << 63)
-#define IO7__POX_TLBERR__ERRCODE__S		(0)
-#define IO7__POX_TLBERR__ERRCODE__M		(0x3)
-#define IO7__POX_TLBERR__ERR_TLB_PTR__S		(3)
-#define IO7__POX_TLBERR__ERR_TLB_PTR__M		(0x7)
-#define IO7__POX_TLBERR__FADDR__S		(6)
-#define IO7__POX_TLBERR__FADDR__M		(0x3fffffffffful)
-
-	if (!(tlb_err & IO7__POX_TLBERR__ERR_VALID))
-		return;
-
-	printk("%s      TLB Error on index 0x%llx:\n"
-	       "%s        - %s\n"
-	       "%s        - Addr: 0x%016llx\n",
-	       err_print_prefix,
-	       EXTRACT(tlb_err, IO7__POX_TLBERR__ERR_TLB_PTR),
-	       err_print_prefix,
-	       tlb_errors[EXTRACT(tlb_err, IO7__POX_TLBERR__ERRCODE)],
-	       err_print_prefix,
-	       EXTRACT(tlb_err, IO7__POX_TLBERR__FADDR) << 6);
-}
-
-static  void
-marvel_print_pox_spl_cmplt(u64 spl_cmplt)
-{
-	char message[80];
-
-#define IO7__POX_SPLCMPLT__MESSAGE__S		(0)
-#define IO7__POX_SPLCMPLT__MESSAGE__M		(0x0fffffffful)
-#define IO7__POX_SPLCMPLT__SOURCE_BUS__S	(40)
-#define IO7__POX_SPLCMPLT__SOURCE_BUS__M	(0xfful)
-#define IO7__POX_SPLCMPLT__SOURCE_DEV__S	(35)
-#define IO7__POX_SPLCMPLT__SOURCE_DEV__M	(0x1ful)
-#define IO7__POX_SPLCMPLT__SOURCE_FUNC__S	(32)
-#define IO7__POX_SPLCMPLT__SOURCE_FUNC__M	(0x07ul)
-
-#define IO7__POX_SPLCMPLT__MSG_CLASS__S		(28)
-#define IO7__POX_SPLCMPLT__MSG_CLASS__M		(0xf)
-#define IO7__POX_SPLCMPLT__MSG_INDEX__S		(20)
-#define IO7__POX_SPLCMPLT__MSG_INDEX__M		(0xff)
-#define IO7__POX_SPLCMPLT__MSG_CLASSINDEX__S	(20)
-#define IO7__POX_SPLCMPLT__MSG_CLASSINDEX__M    (0xfff)
-#define IO7__POX_SPLCMPLT__REM_LOWER_ADDR__S	(12)
-#define IO7__POX_SPLCMPLT__REM_LOWER_ADDR__M	(0x7f)
-#define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__S	(0)
-#define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M	(0xfff)
-
-	printk("%s      Split Completion Error:\n"	
-	       "%s         Source (Bus:Dev:Func): %lld:%lld:%lld\n",
-	       err_print_prefix,
-	       err_print_prefix,
-	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS),
-	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_DEV),
-	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_FUNC));
-
-	switch(EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MSG_CLASSINDEX)) {
-	case 0x000:
-		sprintf(message, "Normal completion");
-		break;
-	case 0x100:
-		sprintf(message, "Bridge - Master Abort");
-		break;
-	case 0x101:
-		sprintf(message, "Bridge - Target Abort");
-		break;
-	case 0x102:
-		sprintf(message, "Bridge - Uncorrectable Write Data Error");
-		break;
-	case 0x200:
-		sprintf(message, "Byte Count Out of Range");
-		break;
-	case 0x201:
-		sprintf(message, "Uncorrectable Split Write Data Error");
-		break;
-	default:
-		sprintf(message, "%08llx\n",
-			EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MESSAGE));
-		break;
-	}
-	printk("%s	   Message: %s\n", err_print_prefix, message);
-}
-
-static void
-marvel_print_pox_trans_sum(u64 trans_sum)
-{
-	static const char * const pcix_cmd[] = {
-		"Interrupt Acknowledge",
-		"Special Cycle",
-		"I/O Read",
-		"I/O Write",
-		"Reserved",
-		"Reserved / Device ID Message",
-		"Memory Read",
-		"Memory Write",
-		"Reserved / Alias to Memory Read Block",
-		"Reserved / Alias to Memory Write Block",
-		"Configuration Read",
-		"Configuration Write",
-		"Memory Read Multiple / Split Completion",
-		"Dual Address Cycle",
-		"Memory Read Line / Memory Read Block",
-		"Memory Write and Invalidate / Memory Write Block"
-	};
-
-#define IO7__POX_TRANSUM__PCI_ADDR__S		(0)
-#define IO7__POX_TRANSUM__PCI_ADDR__M		(0x3fffffffffffful)
-#define IO7__POX_TRANSUM__DAC			(1UL << 50)
-#define IO7__POX_TRANSUM__PCIX_MASTER_SLOT__S	(52)
-#define IO7__POX_TRANSUM__PCIX_MASTER_SLOT__M	(0xf)
-#define IO7__POX_TRANSUM__PCIX_CMD__S		(56)
-#define IO7__POX_TRANSUM__PCIX_CMD__M		(0xf)
-#define IO7__POX_TRANSUM__ERR_VALID		(1UL << 63)
-
-	if (!(trans_sum & IO7__POX_TRANSUM__ERR_VALID))
-		return;
-
-	printk("%s      Transaction Summary:\n"
-	       "%s        Command: 0x%llx - %s\n"
-	       "%s        Address: 0x%016llx%s\n"
-	       "%s        PCI-X Master Slot: 0x%llx\n",
-	       err_print_prefix, 
-	       err_print_prefix, 
-	       EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD),
-	       pcix_cmd[EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD)],
-	       err_print_prefix,
-	       EXTRACT(trans_sum, IO7__POX_TRANSUM__PCI_ADDR),
-	       (trans_sum & IO7__POX_TRANSUM__DAC) ? " (DAC)" : "",
-	       err_print_prefix,
-	       EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_MASTER_SLOT));
-}
-
-static void
-marvel_print_pox_err(u64 err_sum, struct ev7_pal_io_one_port *port)
-{
-#define IO7__POX_ERRSUM__AGP_REQQ_OVFL    (1UL <<  4)
-#define IO7__POX_ERRSUM__AGP_SYNC_ERR     (1UL <<  5)
-#define IO7__POX_ERRSUM__MRETRY_TO        (1UL <<  6)
-#define IO7__POX_ERRSUM__PCIX_UX_SPL      (1UL <<  7)
-#define IO7__POX_ERRSUM__PCIX_SPLIT_TO    (1UL <<  8)
-#define IO7__POX_ERRSUM__PCIX_DISCARD_SPL (1UL <<  9)
-#define IO7__POX_ERRSUM__DMA_RD_TO        (1UL << 10)
-#define IO7__POX_ERRSUM__CSR_NXM_RD       (1UL << 11)
-#define IO7__POX_ERRSUM__CSR_NXM_WR       (1UL << 12)
-#define IO7__POX_ERRSUM__DMA_TO           (1UL << 13)
-#define IO7__POX_ERRSUM__ALL_MABORTS      (1UL << 14)
-#define IO7__POX_ERRSUM__MABORT		  (1UL << 15)
-#define IO7__POX_ERRSUM__MABORT_MASK	  (IO7__POX_ERRSUM__ALL_MABORTS|\
-					   IO7__POX_ERRSUM__MABORT)
-#define IO7__POX_ERRSUM__PT_TABORT        (1UL << 16)
-#define IO7__POX_ERRSUM__PM_TABORT        (1UL << 17)
-#define IO7__POX_ERRSUM__TABORT_MASK      (IO7__POX_ERRSUM__PT_TABORT | \
-                                           IO7__POX_ERRSUM__PM_TABORT)
-#define IO7__POX_ERRSUM__SERR             (1UL << 18)
-#define IO7__POX_ERRSUM__ADDRERR_STB      (1UL << 19)
-#define IO7__POX_ERRSUM__DETECTED_SERR    (1UL << 20)
-#define IO7__POX_ERRSUM__PERR             (1UL << 21)
-#define IO7__POX_ERRSUM__DATAERR_STB_NIOW (1UL << 22)
-#define IO7__POX_ERRSUM__DETECTED_PERR    (1UL << 23)
-#define IO7__POX_ERRSUM__PM_PERR          (1UL << 24)
-#define IO7__POX_ERRSUM__PT_SCERROR       (1UL << 26)
-#define IO7__POX_ERRSUM__HUNG_BUS         (1UL << 28)
-#define IO7__POX_ERRSUM__UPE_ERROR__S     (51)
-#define IO7__POX_ERRSUM__UPE_ERROR__M     (0xffUL)
-#define IO7__POX_ERRSUM__UPE_ERROR        GEN_MASK(IO7__POX_ERRSUM__UPE_ERROR)
-#define IO7__POX_ERRSUM__TLB_ERR          (1UL << 59)
-#define IO7__POX_ERRSUM__ERR_VALID        (1UL << 63)
-
-#define IO7__POX_ERRSUM__TRANS_SUM__MASK  (IO7__POX_ERRSUM__MRETRY_TO |       \
-					   IO7__POX_ERRSUM__PCIX_UX_SPL |     \
-					   IO7__POX_ERRSUM__PCIX_SPLIT_TO |   \
-					   IO7__POX_ERRSUM__DMA_TO |          \
-					   IO7__POX_ERRSUM__MABORT_MASK |     \
-					   IO7__POX_ERRSUM__TABORT_MASK |     \
-					   IO7__POX_ERRSUM__SERR |            \
-					   IO7__POX_ERRSUM__ADDRERR_STB |     \
-					   IO7__POX_ERRSUM__PERR |            \
-					   IO7__POX_ERRSUM__DATAERR_STB_NIOW |\
-					   IO7__POX_ERRSUM__DETECTED_PERR |   \
-					   IO7__POX_ERRSUM__PM_PERR |         \
-					   IO7__POX_ERRSUM__PT_SCERROR |      \
-					   IO7__POX_ERRSUM__UPE_ERROR)
-
-	if (!(err_sum & IO7__POX_ERRSUM__ERR_VALID))
-		return;
-
-	/*
-	 * First the transaction summary errors
-	 */
-	if (err_sum & IO7__POX_ERRSUM__MRETRY_TO)
-		printk("%s    IO7 Master Retry Timeout expired\n",
-		       err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PCIX_UX_SPL)
-		printk("%s    Unexpected Split Completion\n",
-		       err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PCIX_SPLIT_TO)
-		printk("%s    IO7 Split Completion Timeout expired\n",
-		       err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__DMA_TO)
-		printk("%s    Hung bus during DMA transaction\n",
-		       err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__MABORT_MASK)
-		printk("%s    Master Abort\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PT_TABORT)
-		printk("%s    IO7 Asserted Target Abort\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PM_TABORT)
-		printk("%s    IO7 Received Target Abort\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__ADDRERR_STB) {
-		printk("%s    Address or PCI-X Attribute Parity Error\n", 
-		       err_print_prefix);
-		if (err_sum & IO7__POX_ERRSUM__SERR)
-			printk("%s     IO7 Asserted SERR\n", err_print_prefix);
-	}
-	if (err_sum & IO7__POX_ERRSUM__PERR) {
-		if (err_sum & IO7__POX_ERRSUM__DATAERR_STB_NIOW)
-			printk("%s    IO7 Detected Data Parity Error\n",
-			       err_print_prefix);
-		else
-			printk("%s    Split Completion Response with "
-			       "Parity Error\n", err_print_prefix);
-	}
-	if (err_sum & IO7__POX_ERRSUM__DETECTED_PERR)
-		printk("%s    PERR detected\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PM_PERR)
-		printk("%s    PERR while IO7 is master\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PT_SCERROR) {
-		printk("%s    IO7 Received Split Completion Error message\n",
-		       err_print_prefix);
-		marvel_print_pox_spl_cmplt(port->pox_spl_cmplt);
-	}
-	if (err_sum & IO7__POX_ERRSUM__UPE_ERROR) {
-		unsigned int upe_error = EXTRACT(err_sum,
-						 IO7__POX_ERRSUM__UPE_ERROR);
-		int i;
-		static char *upe_errors[] = {
-			"Parity Error on MSI write data",
-			"MSI read (MSI window is write only",
-			"TLB - Invalid WR transaction",
-			"TLB - Invalid RD transaction",
-			"DMA - WR error (see north port)",
-			"DMA - RD error (see north port)",
-			"PPR - WR error (see north port)",
-			"PPR - RD error (see north port)"
-		};
-
-		printk("%s    UPE Error:\n", err_print_prefix);
-		for (i = 0; i < 8; i++) {
-			if (upe_error & (1 << i))
-				printk("%s      %s\n", err_print_prefix,
-				       upe_errors[i]);
-		}
-	}
-
-	/*
-	 * POx_TRANS_SUM, if appropriate.
-	 */
-	if (err_sum & IO7__POX_ERRSUM__TRANS_SUM__MASK) 
-		marvel_print_pox_trans_sum(port->pox_trans_sum);
-
-	/*
-	 * Then TLB_ERR.
-	 */
-	if (err_sum & IO7__POX_ERRSUM__TLB_ERR) {
-		printk("%s    TLB ERROR\n", err_print_prefix);
-		marvel_print_pox_tlb_err(port->pox_tlb_err);
-	}
-
-	/*
-	 * And the single bit status errors.
-	 */
-	if (err_sum & IO7__POX_ERRSUM__AGP_REQQ_OVFL)
-		printk("%s    AGP Request Queue Overflow\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__AGP_SYNC_ERR)
-		printk("%s    AGP Sync Error\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__PCIX_DISCARD_SPL)
-		printk("%s    Discarded split completion\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__DMA_RD_TO)
-		printk("%s    DMA Read Timeout\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__CSR_NXM_RD)
-		printk("%s    CSR NXM READ\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__CSR_NXM_WR)
-		printk("%s    CSR NXM WRITE\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__DETECTED_SERR)
-		printk("%s    SERR detected\n", err_print_prefix);
-	if (err_sum & IO7__POX_ERRSUM__HUNG_BUS)
-		printk("%s    HUNG BUS detected\n", err_print_prefix);
-}
-
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-static struct ev7_pal_io_subpacket *
-marvel_find_io7_with_error(struct ev7_lf_subpackets *lf_subpackets)
-{
-	struct ev7_pal_io_subpacket *io = lf_subpackets->io;
-	struct io7 *io7;
-	int i;
-
-	/*
-	 * Caller must provide the packet to fill
-	 */
-	if (!io)
-		return NULL;
-
-	/*
-	 * Fill the subpacket with the console's standard fill pattern
-	 */
-	memset(io, 0x55, sizeof(*io));
-
-	for (io7 = NULL; NULL != (io7 = marvel_next_io7(io7)); ) {
-		unsigned long err_sum = 0;
-
-		err_sum |= io7->csrs->PO7_ERROR_SUM.csr;
-		for (i = 0; i < IO7_NUM_PORTS; i++) {
-			if (!io7->ports[i].enabled)
-				continue;
-			err_sum |= io7->ports[i].csrs->POx_ERR_SUM.csr;
-		}
-
-		/*
-		 * Is there at least one error? 
-		 */
-		if (err_sum & (1UL << 63))
-			break;
-	}
-
-	/*
-	 * Did we find an IO7 with an error?
-	 */
-	if (!io7)
-		return NULL;
-
-	/*
-	 * We have an IO7 with an error. 
-	 *
-	 * Fill in the IO subpacket.
-	 */
-	io->io_asic_rev   = io7->csrs->IO_ASIC_REV.csr;
-	io->io_sys_rev    = io7->csrs->IO_SYS_REV.csr;
-	io->io7_uph       = io7->csrs->IO7_UPH.csr;
-	io->hpi_ctl       = io7->csrs->HPI_CTL.csr;
-	io->crd_ctl       = io7->csrs->CRD_CTL.csr;
-	io->hei_ctl       = io7->csrs->HEI_CTL.csr;
-	io->po7_error_sum = io7->csrs->PO7_ERROR_SUM.csr;
-	io->po7_uncrr_sym = io7->csrs->PO7_UNCRR_SYM.csr;
-	io->po7_crrct_sym = io7->csrs->PO7_CRRCT_SYM.csr;
-	io->po7_ugbge_sym = io7->csrs->PO7_UGBGE_SYM.csr;
-	io->po7_err_pkt0  = io7->csrs->PO7_ERR_PKT[0].csr;
-	io->po7_err_pkt1  = io7->csrs->PO7_ERR_PKT[1].csr;
-	
-	for (i = 0; i < IO7_NUM_PORTS; i++) {
-		io7_ioport_csrs *csrs = io7->ports[i].csrs;
-
-		if (!io7->ports[i].enabled)
-			continue;
-
-		io->ports[i].pox_err_sum   = csrs->POx_ERR_SUM.csr;
-		io->ports[i].pox_tlb_err   = csrs->POx_TLB_ERR.csr;
-		io->ports[i].pox_spl_cmplt = csrs->POx_SPL_COMPLT.csr;
-		io->ports[i].pox_trans_sum = csrs->POx_TRANS_SUM.csr;
-		io->ports[i].pox_first_err = csrs->POx_FIRST_ERR.csr;
-		io->ports[i].pox_mult_err  = csrs->POx_MULT_ERR.csr;
-		io->ports[i].pox_dm_source = csrs->POx_DM_SOURCE.csr;
-		io->ports[i].pox_dm_dest   = csrs->POx_DM_DEST.csr;
-		io->ports[i].pox_dm_size   = csrs->POx_DM_SIZE.csr;
-		io->ports[i].pox_dm_ctrl   = csrs->POx_DM_CTRL.csr;
-
-		/*
-		 * Ack this port's errors, if any. POx_ERR_SUM must be last.
-		 *
-		 * Most of the error registers get cleared and unlocked when
-		 * the associated bits in POx_ERR_SUM are cleared (by writing
-		 * 1). POx_TLB_ERR is an exception and must be explicitly 
-		 * cleared.
-		 */
-		csrs->POx_TLB_ERR.csr = io->ports[i].pox_tlb_err;
-		csrs->POx_ERR_SUM.csr =	io->ports[i].pox_err_sum;
-		mb();
-		csrs->POx_ERR_SUM.csr;		
-	}
-
-	/*
-	 * Ack any port 7 error(s).
-	 */
-	io7->csrs->PO7_ERROR_SUM.csr = io->po7_error_sum;
-	mb();
-	io7->csrs->PO7_ERROR_SUM.csr;
-	
-	/*
-	 * Correct the io7_pid.
-	 */
-	lf_subpackets->io_pid = io7->pe;
-
-	return io;
-}
-
-static int
-marvel_process_io_error(struct ev7_lf_subpackets *lf_subpackets, int print)
-{
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	struct ev7_pal_io_subpacket *io = lf_subpackets->io;
-	int i;
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-#define MARVEL_IO_ERR_VALID(x)  ((x) & (1UL << 63))
-
-	if (!lf_subpackets->logout || !lf_subpackets->io)
-		return status;
-
-	/*
-	 * The PALcode only builds an IO subpacket if there is a 
-	 * locally connected IO7. In the cases of
-	 *	1) a uniprocessor kernel
-	 *	2) an mp kernel before the local secondary has called in
-	 * error interrupts are all directed to the primary processor.
-	 * In that case, we may not have an IO subpacket at all and, event
-	 * if we do, it may not be the right now. 
-	 *
-	 * If the RBOX indicates an I/O error interrupt, make sure we have
-	 * the correct IO7 information. If we don't have an IO subpacket
-	 * or it's the wrong one, try to find the right one.
-	 *
-	 * RBOX I/O error interrupts are indicated by RBOX_INT<29> and
-	 * RBOX_INT<10>.
-	 */
-	if ((lf_subpackets->io->po7_error_sum & (1UL << 32)) ||
-	    ((lf_subpackets->io->po7_error_sum        |
-	      lf_subpackets->io->ports[0].pox_err_sum |
-	      lf_subpackets->io->ports[1].pox_err_sum |
-	      lf_subpackets->io->ports[2].pox_err_sum |
-	      lf_subpackets->io->ports[3].pox_err_sum) & (1UL << 63))) {
-		/*
-		 * Either we have no IO subpacket or no error is
-		 * indicated in the one we do have. Try find the
-		 * one with the error.
-		 */
-		if (!marvel_find_io7_with_error(lf_subpackets))
-			return status;
-	}
-
-	/*
-	 * We have an IO7 indicating an error - we're going to report it
-	 */
-	status = MCHK_DISPOSITION_REPORT;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-
-	if (!print)
-		return status;
-
-	printk("%s*Error occurred on IO7 at PID %u\n", 
-	       err_print_prefix, lf_subpackets->io_pid);
-
-	/*
-	 * Check port 7 first
-	 */
-	if (lf_subpackets->io->po7_error_sum & IO7__PO7_ERRSUM__ERR_MASK) {
-		marvel_print_po7_err_sum(io);
-
-#if 0
-		printk("%s  PORT 7 ERROR:\n"
-		       "%s    PO7_ERROR_SUM: %016llx\n"
-		       "%s    PO7_UNCRR_SYM: %016llx\n"
-		       "%s    PO7_CRRCT_SYM: %016llx\n"
-		       "%s    PO7_UGBGE_SYM: %016llx\n"
-		       "%s    PO7_ERR_PKT0:  %016llx\n"
-		       "%s    PO7_ERR_PKT1:  %016llx\n",
-		       err_print_prefix,
-		       err_print_prefix, io->po7_error_sum,
-		       err_print_prefix, io->po7_uncrr_sym,
-		       err_print_prefix, io->po7_crrct_sym,
-		       err_print_prefix, io->po7_ugbge_sym,
-		       err_print_prefix, io->po7_err_pkt0,
-		       err_print_prefix, io->po7_err_pkt1);
-#endif
-	}
-
-	/*
-	 * Then loop through the ports
-	 */
-	for (i = 0; i < IO7_NUM_PORTS; i++) {
-		if (!MARVEL_IO_ERR_VALID(io->ports[i].pox_err_sum))
-			continue;
-
-		printk("%s  PID %u PORT %d POx_ERR_SUM: %016llx\n",
-		       err_print_prefix, 
-		       lf_subpackets->io_pid, i, io->ports[i].pox_err_sum);
-		marvel_print_pox_err(io->ports[i].pox_err_sum, &io->ports[i]);
-
-		printk("%s  [ POx_FIRST_ERR: %016llx ]\n",
-		       err_print_prefix, io->ports[i].pox_first_err);
-		marvel_print_pox_err(io->ports[i].pox_first_err, 
-				     &io->ports[i]);
-
-	}
-
-
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return status;
-}
-
-static int
-marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
-{
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	/*
-	 * I/O error? 
-	 */
-#define EV7__RBOX_INT__IO_ERROR__MASK 0x20000400ul
-	if (lf_subpackets->logout &&
-	    (lf_subpackets->logout->rbox_int & 0x20000400ul))
-		status = marvel_process_io_error(lf_subpackets, print);
-
-	/*
-	 * Probing behind PCI-X bridges can cause machine checks on
-	 * Marvel when the probe is handled by the bridge as a split
-	 * completion transaction. The symptom is an ERROR_RESPONSE 
-	 * to a CONFIG address. Since these errors will happen in
-	 * normal operation, dismiss them.
-	 *
-	 * Dismiss if:
-	 *	C_STAT		= 0x14 		(Error Response)
-	 *	C_STS<3>	= 0    		(C_ADDR valid)
-	 *	C_ADDR<42>	= 1    		(I/O)
-	 *	C_ADDR<31:22>	= 111110xxb	(PCI Config space)
-	 */
-	if (lf_subpackets->ev7 &&
-	    (lf_subpackets->ev7->c_stat == 0x14) &&
-	    !(lf_subpackets->ev7->c_sts & 0x8) &&
-	    ((lf_subpackets->ev7->c_addr & 0x400ff000000ul) 
-	     == 0x400fe000000ul))
-		status = MCHK_DISPOSITION_DISMISS;
-
-	return status;
-}
-
-void
-marvel_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
-	int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
-	struct ev7_lf_subpackets subpacket_collection = { NULL, };
-	struct ev7_pal_io_subpacket scratch_io_packet = { 0, };
-	struct ev7_lf_subpackets *lf_subpackets = NULL;
-	int disposition = MCHK_DISPOSITION_UNKNOWN_ERROR;
-	char *saved_err_prefix = err_print_prefix;
-	char *error_type = NULL;
-
-	/*
-	 * Sync the processor
-	 */
-	mb();
-	draina();
-
-	switch(vector) {
-	case SCB_Q_SYSEVENT:
-		process_frame = marvel_process_680_frame;
-		error_type = "System Event";
-		break;
-
-	case SCB_Q_SYSMCHK:
-		process_frame = marvel_process_logout_frame;
-		error_type = "System Uncorrectable Error";
-		break;
-
-	case SCB_Q_SYSERR:
-		process_frame = marvel_process_logout_frame;
-		error_type = "System Correctable Error";
-		break;
-
-	default:
-		/* Don't know it - pass it up.  */
-		ev7_machine_check(vector, la_ptr);
-		return;
-	}	
-
-	/*
-	 * A system event or error has occurred, handle it here.
-	 *
-	 * Any errors in the logout frame have already been cleared by the
-	 * PALcode, so just parse it.
-	 */
-	err_print_prefix = KERN_CRIT;
-
-	/* 
-	 * Parse the logout frame without printing first. If the only error(s)
-	 * found are classified as "dismissable", then just dismiss them and
-	 * don't print any message
-	 */
-	lf_subpackets = 
-		ev7_collect_logout_frame_subpackets(el_ptr,
-						    &subpacket_collection);
-	if (process_frame && lf_subpackets && lf_subpackets->logout) {
-		/*
-		 * We might not have the correct (or any) I/O subpacket.
-		 * [ See marvel_process_io_error() for explanation. ]
-		 * If we don't have one, point the io subpacket in
-		 * lf_subpackets at scratch_io_packet so that 
-		 * marvel_find_io7_with_error() will have someplace to
-		 * store the info.
-		 */
-		if (!lf_subpackets->io)
-			lf_subpackets->io = &scratch_io_packet;
-
-		/*
-		 * Default io_pid to the processor reporting the error
-		 * [this will get changed in marvel_find_io7_with_error()
-		 * if a different one is needed]
-		 */
-		lf_subpackets->io_pid = lf_subpackets->logout->whami;
-
-		/*
-		 * Evaluate the frames.
-		 */
-		disposition = process_frame(lf_subpackets, 0);
-	}
-	switch(disposition) {
-	case MCHK_DISPOSITION_DISMISS:
-		/* Nothing to do. */
-		break;
-
-	case MCHK_DISPOSITION_REPORT:
-		/* Recognized error, report it. */
-		printk("%s*%s (Vector 0x%x) reported on CPU %d\n",
-		       err_print_prefix, error_type,
-		       (unsigned int)vector, (int)smp_processor_id());
-		el_print_timestamp(&lf_subpackets->logout->timestamp);
-		process_frame(lf_subpackets, 1);
-		break;
-
-	default:
-		/* Unknown - dump the annotated subpackets. */
-		printk("%s*%s (Vector 0x%x) reported on CPU %d\n",
-		       err_print_prefix, error_type,
-		       (unsigned int)vector, (int)smp_processor_id());
-		el_process_subpacket(el_ptr);
-		break;
-
-	}
-
-	err_print_prefix = saved_err_prefix;
-
-        /* Release the logout frame.  */
-	wrmces(0x7);
-	mb();
-}
-
-void __init
-marvel_register_error_handlers(void)
-{
-	ev7_register_error_handlers();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/err_titan.c b/ANDROID_3.4.5/arch/alpha/kernel/err_titan.c
deleted file mode 100644
index 14b26c46..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/err_titan.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/err_titan.c
- *
- *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
- *
- *	Error handling code supporting TITAN systems
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/core_titan.h>
-#include <asm/hwrpb.h>
-#include <asm/smp.h>
-#include <asm/err_common.h>
-#include <asm/err_ev6.h>
-#include <asm/irq_regs.h>
-
-#include "err_impl.h"
-#include "proto.h"
-
-
-static int
-titan_parse_c_misc(u64 c_misc, int print)
-{
-#ifdef CONFIG_VERBOSE_MCHECK
-	char *src;
-	int nxs = 0;
-#endif
-	int status = MCHK_DISPOSITION_REPORT;
-
-#define TITAN__CCHIP_MISC__NXM		(1UL << 28)
-#define TITAN__CCHIP_MISC__NXS__S	(29)
-#define TITAN__CCHIP_MISC__NXS__M	(0x7)
-
-	if (!(c_misc & TITAN__CCHIP_MISC__NXM))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (!print)
-		return status;
-
-	nxs = EXTRACT(c_misc, TITAN__CCHIP_MISC__NXS);
-	switch(nxs) {
-	case 0:	/* CPU 0 */
-	case 1:	/* CPU 1 */
-	case 2:	/* CPU 2 */
-	case 3:	/* CPU 3 */
-		src = "CPU";
-		/* num is already the CPU number */
-		break;
-	case 4:	/* Pchip 0 */
-	case 5:	/* Pchip 1 */
-		src = "Pchip";
-		nxs -= 4;
-		break;
-	default:/* reserved */
-		src = "Unknown, NXS =";
-		/* leave num untouched */
-		break;
-	}
-
-	printk("%s    Non-existent memory access from: %s %d\n", 
-	       err_print_prefix, src, nxs);
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return status;
-}
-
-static int
-titan_parse_p_serror(int which, u64 serror, int print)
-{
-	int status = MCHK_DISPOSITION_REPORT;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	static const char * const serror_src[] = {
-		"GPCI", "APCI", "AGP HP", "AGP LP"
-	};
-	static const char * const serror_cmd[] = {
-		"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
-	};
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-#define TITAN__PCHIP_SERROR__LOST_UECC	(1UL << 0)
-#define TITAN__PCHIP_SERROR__UECC	(1UL << 1)
-#define TITAN__PCHIP_SERROR__CRE	(1UL << 2)
-#define TITAN__PCHIP_SERROR__NXIO	(1UL << 3)
-#define TITAN__PCHIP_SERROR__LOST_CRE	(1UL << 4)
-#define TITAN__PCHIP_SERROR__ECCMASK	(TITAN__PCHIP_SERROR__UECC |	  \
-					 TITAN__PCHIP_SERROR__CRE)
-#define TITAN__PCHIP_SERROR__ERRMASK	(TITAN__PCHIP_SERROR__LOST_UECC | \
-					 TITAN__PCHIP_SERROR__UECC |	  \
-					 TITAN__PCHIP_SERROR__CRE |	  \
-					 TITAN__PCHIP_SERROR__NXIO |	  \
-					 TITAN__PCHIP_SERROR__LOST_CRE)
-#define TITAN__PCHIP_SERROR__SRC__S	(52)
-#define TITAN__PCHIP_SERROR__SRC__M	(0x3)
-#define TITAN__PCHIP_SERROR__CMD__S	(54)
-#define TITAN__PCHIP_SERROR__CMD__M	(0x3)
-#define TITAN__PCHIP_SERROR__SYN__S	(56)
-#define TITAN__PCHIP_SERROR__SYN__M	(0xff)
-#define TITAN__PCHIP_SERROR__ADDR__S	(15)
-#define TITAN__PCHIP_SERROR__ADDR__M	(0xffffffffUL)
-
-	if (!(serror & TITAN__PCHIP_SERROR__ERRMASK))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (!print)
-		return status;
-
-	printk("%s  PChip %d SERROR: %016llx\n",
-	       err_print_prefix, which, serror);
-	if (serror & TITAN__PCHIP_SERROR__ECCMASK) {
-		printk("%s    %sorrectable ECC Error:\n"
-		       "      Source: %-6s  Command: %-8s  Syndrome: 0x%08x\n"
-		       "      Address: 0x%llx\n",
-		       err_print_prefix,
-		       (serror & TITAN__PCHIP_SERROR__UECC) ? "Unc" : "C",
-		       serror_src[EXTRACT(serror, TITAN__PCHIP_SERROR__SRC)],
-		       serror_cmd[EXTRACT(serror, TITAN__PCHIP_SERROR__CMD)],
-		       (unsigned)EXTRACT(serror, TITAN__PCHIP_SERROR__SYN),
-		       EXTRACT(serror, TITAN__PCHIP_SERROR__ADDR));
-	}
-	if (serror & TITAN__PCHIP_SERROR__NXIO)
-		printk("%s    Non Existent I/O Error\n", err_print_prefix);
-	if (serror & TITAN__PCHIP_SERROR__LOST_UECC)
-		printk("%s    Lost Uncorrectable ECC Error\n", 
-		       err_print_prefix);
-	if (serror & TITAN__PCHIP_SERROR__LOST_CRE)
-		printk("%s    Lost Correctable ECC Error\n", err_print_prefix);
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return status;
-}
-
-static int 
-titan_parse_p_perror(int which, int port, u64 perror, int print)
-{
-	int cmd;
-	unsigned long addr;
-	int status = MCHK_DISPOSITION_REPORT;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	static const char * const perror_cmd[] = {
-		"Interrupt Acknowledge", "Special Cycle",
-		"I/O Read",		"I/O Write",
-		"Reserved",		"Reserved",
-		"Memory Read",		"Memory Write",
-		"Reserved",		"Reserved",
-		"Configuration Read",	"Configuration Write",
-		"Memory Read Multiple",	"Dual Address Cycle",
-		"Memory Read Line",	"Memory Write and Invalidate"
-	};
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-#define TITAN__PCHIP_PERROR__LOST	(1UL << 0)
-#define TITAN__PCHIP_PERROR__SERR	(1UL << 1)
-#define TITAN__PCHIP_PERROR__PERR	(1UL << 2)
-#define TITAN__PCHIP_PERROR__DCRTO	(1UL << 3)
-#define TITAN__PCHIP_PERROR__SGE	(1UL << 4)
-#define TITAN__PCHIP_PERROR__APE	(1UL << 5)
-#define TITAN__PCHIP_PERROR__TA		(1UL << 6)
-#define TITAN__PCHIP_PERROR__DPE	(1UL << 7)
-#define TITAN__PCHIP_PERROR__NDS	(1UL << 8)
-#define TITAN__PCHIP_PERROR__IPTPR	(1UL << 9)
-#define TITAN__PCHIP_PERROR__IPTPW	(1UL << 10)
-#define TITAN__PCHIP_PERROR__ERRMASK	(TITAN__PCHIP_PERROR__LOST |	\
-					 TITAN__PCHIP_PERROR__SERR |	\
-					 TITAN__PCHIP_PERROR__PERR |	\
-					 TITAN__PCHIP_PERROR__DCRTO |	\
-					 TITAN__PCHIP_PERROR__SGE |	\
-					 TITAN__PCHIP_PERROR__APE |	\
-					 TITAN__PCHIP_PERROR__TA |	\
-					 TITAN__PCHIP_PERROR__DPE |	\
-					 TITAN__PCHIP_PERROR__NDS |	\
-					 TITAN__PCHIP_PERROR__IPTPR |	\
-					 TITAN__PCHIP_PERROR__IPTPW)
-#define TITAN__PCHIP_PERROR__DAC	(1UL << 47)
-#define TITAN__PCHIP_PERROR__MWIN	(1UL << 48)
-#define TITAN__PCHIP_PERROR__CMD__S	(52)
-#define TITAN__PCHIP_PERROR__CMD__M	(0x0f)
-#define TITAN__PCHIP_PERROR__ADDR__S	(14)
-#define TITAN__PCHIP_PERROR__ADDR__M	(0x1fffffffful)
-
-	if (!(perror & TITAN__PCHIP_PERROR__ERRMASK))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	cmd = EXTRACT(perror, TITAN__PCHIP_PERROR__CMD);
-	addr = EXTRACT(perror, TITAN__PCHIP_PERROR__ADDR) << 2;
-
-	/*
-	 * Initializing the BIOS on a video card on a bus without
-	 * a south bridge (subtractive decode agent) can result in 
-	 * master aborts as the BIOS probes the capabilities of the
-	 * card. XFree86 does such initialization. If the error
-	 * is a master abort (No DevSel as PCI Master) and the command
-	 * is an I/O read or write below the address where we start
-	 * assigning PCI I/O spaces (SRM uses 0x1000), then mark the
-	 * error as dismissable so starting XFree86 doesn't result
-	 * in a series of uncorrectable errors being reported. Also
-	 * dismiss master aborts to VGA frame buffer space
-	 * (0xA0000 - 0xC0000) and legacy BIOS space (0xC0000 - 0x100000)
-	 * for the same reason.
-	 *
-	 * Also mark the error dismissible if it looks like the right
-	 * error but only the Lost bit is set. Since the BIOS initialization
-	 * can cause multiple master aborts and the error interrupt can
-	 * be handled on a different CPU than the BIOS code is run on,
-	 * it is possible for a second master abort to occur between the
-	 * time the PALcode reads PERROR and the time it writes PERROR
-	 * to acknowledge the error. If this timing happens, a second
-	 * error will be signalled after the first, and if no additional
-	 * errors occur, will look like a Lost error with no additional 
-	 * errors on the same transaction as the previous error.
-	 */
-	if (((perror & TITAN__PCHIP_PERROR__NDS) || 
-	     ((perror & TITAN__PCHIP_PERROR__ERRMASK) == 
-	      TITAN__PCHIP_PERROR__LOST)) &&
-	    ((((cmd & 0xE) == 2) && (addr < 0x1000)) ||
-	     (((cmd & 0xE) == 6) && (addr >= 0xA0000) && (addr < 0x100000)))) {
-		status = MCHK_DISPOSITION_DISMISS;
-	}
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (!print) 
-		return status;
-
-	printk("%s  PChip %d %cPERROR: %016llx\n",
-	       err_print_prefix, which, 
-	       port ? 'A' : 'G', perror);
-	if (perror & TITAN__PCHIP_PERROR__IPTPW)
-		printk("%s    Invalid Peer-to-Peer Write\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__IPTPR)
-		printk("%s    Invalid Peer-to-Peer Read\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__NDS)
-		printk("%s    No DEVSEL as PCI Master [Master Abort]\n",
-		       err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__DPE)
-		printk("%s    Data Parity Error\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__TA)
-		printk("%s    Target Abort\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__APE)
-		printk("%s    Address Parity Error\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__SGE)
-		printk("%s    Scatter-Gather Error, Invalid PTE\n", 
-		       err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__DCRTO)
-		printk("%s    Delayed-Completion Retry Timeout\n", 
-		       err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__PERR)
-		printk("%s    PERR Asserted\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__SERR)
-		printk("%s    SERR Asserted\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__LOST)
-		printk("%s    Lost Error\n", err_print_prefix);
-	printk("%s      Command: 0x%x - %s\n"
-		 "      Address: 0x%lx\n",
-	       err_print_prefix,
-	       cmd, perror_cmd[cmd],
-	       addr);
-	if (perror & TITAN__PCHIP_PERROR__DAC)
-		printk("%s      Dual Address Cycle\n", err_print_prefix);
-	if (perror & TITAN__PCHIP_PERROR__MWIN)
-		printk("%s      Hit in Monster Window\n", err_print_prefix);
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return status;
-}
-
-static int
-titan_parse_p_agperror(int which, u64 agperror, int print)
-{
-	int status = MCHK_DISPOSITION_REPORT;
-#ifdef CONFIG_VERBOSE_MCHECK
-	int cmd, len;
-	unsigned long addr;
-
-	static const char * const agperror_cmd[] = {
-		"Read (low-priority)",	"Read (high-priority)",
-		"Write (low-priority)",	"Write (high-priority)",
-		"Reserved",		"Reserved",
-		"Flush",		"Fence"
-	};
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-#define TITAN__PCHIP_AGPERROR__LOST	(1UL << 0)
-#define TITAN__PCHIP_AGPERROR__LPQFULL	(1UL << 1)
-#define TITAN__PCHIP_AGPERROR__HPQFULL	(1UL << 2)
-#define TITAN__PCHIP_AGPERROR__RESCMD	(1UL << 3)
-#define TITAN__PCHIP_AGPERROR__IPTE	(1UL << 4)
-#define TITAN__PCHIP_AGPERROR__PTP	(1UL << 5)
-#define TITAN__PCHIP_AGPERROR__NOWINDOW	(1UL << 6)
-#define TITAN__PCHIP_AGPERROR__ERRMASK	(TITAN__PCHIP_AGPERROR__LOST |    \
-					 TITAN__PCHIP_AGPERROR__LPQFULL | \
-					 TITAN__PCHIP_AGPERROR__HPQFULL | \
-					 TITAN__PCHIP_AGPERROR__RESCMD |  \
-					 TITAN__PCHIP_AGPERROR__IPTE |    \
-					 TITAN__PCHIP_AGPERROR__PTP |     \
-					 TITAN__PCHIP_AGPERROR__NOWINDOW)
-#define TITAN__PCHIP_AGPERROR__DAC	(1UL << 48)
-#define TITAN__PCHIP_AGPERROR__MWIN	(1UL << 49)
-#define TITAN__PCHIP_AGPERROR__FENCE	(1UL << 59)
-#define TITAN__PCHIP_AGPERROR__CMD__S	(50)
-#define TITAN__PCHIP_AGPERROR__CMD__M	(0x07)
-#define TITAN__PCHIP_AGPERROR__ADDR__S	(15)
-#define TITAN__PCHIP_AGPERROR__ADDR__M  (0xffffffffUL)
-#define TITAN__PCHIP_AGPERROR__LEN__S	(53)
-#define TITAN__PCHIP_AGPERROR__LEN__M	(0x3f)
-
-	if (!(agperror & TITAN__PCHIP_AGPERROR__ERRMASK))
-		return MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (!print)
-		return status;
-
-	cmd = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__CMD);
-	addr = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__ADDR) << 3;
-	len = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__LEN);
-
-	printk("%s  PChip %d AGPERROR: %016llx\n", err_print_prefix,
-	       which, agperror);
-	if (agperror & TITAN__PCHIP_AGPERROR__NOWINDOW)
-		printk("%s    No Window\n", err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__PTP)
-		printk("%s    Peer-to-Peer set\n", err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__IPTE)
-		printk("%s    Invalid PTE\n", err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__RESCMD)
-		printk("%s    Reserved Command\n", err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__HPQFULL)
-		printk("%s    HP Transaction Received while Queue Full\n", 
-		       err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__LPQFULL)
-		printk("%s    LP Transaction Received while Queue Full\n", 
-		       err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__LOST)
-		printk("%s    Lost Error\n", err_print_prefix);
-	printk("%s      Command: 0x%x - %s, %d Quadwords%s\n"
-		 "      Address: 0x%lx\n",
-	       err_print_prefix, cmd, agperror_cmd[cmd], len,
-	       (agperror & TITAN__PCHIP_AGPERROR__FENCE) ? ", FENCE" : "",
-	       addr);
-	if (agperror & TITAN__PCHIP_AGPERROR__DAC)
-		printk("%s      Dual Address Cycle\n", err_print_prefix);
-	if (agperror & TITAN__PCHIP_AGPERROR__MWIN)
-		printk("%s      Hit in Monster Window\n", err_print_prefix);
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return status;
-}	
-
-static int
-titan_parse_p_chip(int which, u64 serror, u64 gperror, 
-		   u64 aperror, u64 agperror, int print)
-{
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-	status |= titan_parse_p_serror(which, serror, print);
-	status |= titan_parse_p_perror(which, 0, gperror, print);
-	status |= titan_parse_p_perror(which, 1, aperror, print);
-	status |= titan_parse_p_agperror(which, agperror, print);
-	return status;
-}
-
-int
-titan_process_logout_frame(struct el_common *mchk_header, int print)
-{
-	struct el_TITAN_sysdata_mcheck *tmchk =
-		(struct el_TITAN_sysdata_mcheck *)
-		((unsigned long)mchk_header + mchk_header->sys_offset);
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	status |= titan_parse_c_misc(tmchk->c_misc, print);
-	status |= titan_parse_p_chip(0, tmchk->p0_serror, tmchk->p0_gperror,
-				     tmchk->p0_aperror, tmchk->p0_agperror, 
-				     print);
-	status |= titan_parse_p_chip(1, tmchk->p1_serror, tmchk->p1_gperror,
-				     tmchk->p1_aperror, tmchk->p1_agperror, 
-				     print);
-
-	return status;
-}
-
-void
-titan_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header = (struct el_common *)la_ptr;
-	struct el_TITAN_sysdata_mcheck *tmchk =
-		(struct el_TITAN_sysdata_mcheck *)
-		((unsigned long)mchk_header + mchk_header->sys_offset);
-	u64 irqmask;
-
-	/*
-	 * Mask of Titan interrupt sources which are reported as machine checks
-	 *
-	 * 63 - CChip Error
-	 * 62 - PChip 0 H_Error
-	 * 61 - PChip 1 H_Error
-	 * 60 - PChip 0 C_Error
-	 * 59 - PChip 1 C_Error
-	 */
-#define TITAN_MCHECK_INTERRUPT_MASK	0xF800000000000000UL
-
-	/*
-	 * Sync the processor
-	 */
-	mb();
-	draina();
-	
-	/*
-	 * Only handle system errors here 
-	 */
-	if ((vector != SCB_Q_SYSMCHK) && (vector != SCB_Q_SYSERR)) {
-		ev6_machine_check(vector, la_ptr);
-		return;
-	}
-
-	/* 
-	 * It's a system error, handle it here
-	 *
-	 * The PALcode has already cleared the error, so just parse it
-	 */
-	
-	/* 
-	 * Parse the logout frame without printing first. If the only error(s)
-	 * found are classified as "dismissable", then just dismiss them and
-	 * don't print any message
-	 */
-	if (titan_process_logout_frame(mchk_header, 0) != 
-	    MCHK_DISPOSITION_DISMISS) {
-		char *saved_err_prefix = err_print_prefix;
-		err_print_prefix = KERN_CRIT;
-
-		/*
-		 * Either a nondismissable error was detected or no
-		 * recognized error was detected  in the logout frame 
-		 * -- report the error in either case
-		 */
-		printk("%s"
-		       "*System %s Error (Vector 0x%x) reported on CPU %d:\n", 
-		       err_print_prefix,
-		       (vector == SCB_Q_SYSERR)?"Correctable":"Uncorrectable",
-		       (unsigned int)vector, (int)smp_processor_id());
-		
-#ifdef CONFIG_VERBOSE_MCHECK
-		titan_process_logout_frame(mchk_header, alpha_verbose_mcheck);
-		if (alpha_verbose_mcheck)
-			dik_show_regs(get_irq_regs(), NULL);
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-		err_print_prefix = saved_err_prefix;
-
-		/*
-		 * Convert any pending interrupts which report as system
-		 * machine checks to interrupts
-		 */
-		irqmask = tmchk->c_dirx & TITAN_MCHECK_INTERRUPT_MASK;
-		titan_dispatch_irqs(irqmask);
-	}	
-
-
-	/* 
-	 * Release the logout frame 
-	 */
-	wrmces(0x7);
-	mb();
-}
-
-/*
- * Subpacket Annotations
- */
-static char *el_titan_pchip0_extended_annotation[] = {
-	"Subpacket Header", 	"P0_SCTL",	"P0_SERREN",
-	"P0_APCTL",		"P0_APERREN",	"P0_AGPERREN",
-	"P0_ASPRST",		"P0_AWSBA0",	"P0_AWSBA1",
-	"P0_AWSBA2",		"P0_AWSBA3",	"P0_AWSM0",
-	"P0_AWSM1",		"P0_AWSM2",	"P0_AWSM3",
-	"P0_ATBA0",		"P0_ATBA1",	"P0_ATBA2",
-	"P0_ATBA3",		"P0_GPCTL",	"P0_GPERREN",
-	"P0_GSPRST",		"P0_GWSBA0",	"P0_GWSBA1",
-	"P0_GWSBA2",		"P0_GWSBA3",	"P0_GWSM0",
-	"P0_GWSM1",		"P0_GWSM2",	"P0_GWSM3",
-	"P0_GTBA0",		"P0_GTBA1",	"P0_GTBA2",
-	"P0_GTBA3",		NULL 
-};
-static char *el_titan_pchip1_extended_annotation[] = {
-	"Subpacket Header", 	"P1_SCTL",	"P1_SERREN",
-	"P1_APCTL",		"P1_APERREN",	"P1_AGPERREN",
-	"P1_ASPRST",		"P1_AWSBA0",	"P1_AWSBA1",
-	"P1_AWSBA2",		"P1_AWSBA3",	"P1_AWSM0",
-	"P1_AWSM1",		"P1_AWSM2",	"P1_AWSM3",
-	"P1_ATBA0",		"P1_ATBA1",	"P1_ATBA2",
-	"P1_ATBA3",		"P1_GPCTL",	"P1_GPERREN",
-	"P1_GSPRST",		"P1_GWSBA0",	"P1_GWSBA1",
-	"P1_GWSBA2",		"P1_GWSBA3",	"P1_GWSM0",
-	"P1_GWSM1",		"P1_GWSM2",	"P1_GWSM3",
-	"P1_GTBA0",		"P1_GTBA1",	"P1_GTBA2",
-	"P1_GTBA3",		NULL 
-};
-static char *el_titan_memory_extended_annotation[] = {
-	"Subpacket Header", 	"AAR0",		"AAR1",
-	"AAR2",			"AAR3",		"P0_SCTL",
-	"P0_GPCTL",		"P0_APCTL",	"P1_SCTL",
-	"P1_GPCTL",		"P1_SCTL",	NULL 
-};
-
-static struct el_subpacket_annotation el_titan_annotations[] = {
-	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
-			     EL_TYPE__REGATTA__TITAN_PCHIP0_EXTENDED,
-			     1,
-			     "Titan PChip 0 Extended Frame",
-			     el_titan_pchip0_extended_annotation),
-	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
-			     EL_TYPE__REGATTA__TITAN_PCHIP1_EXTENDED,
-			     1,
-			     "Titan PChip 1 Extended Frame",
-			     el_titan_pchip1_extended_annotation),
-	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
-			     EL_TYPE__REGATTA__TITAN_MEMORY_EXTENDED,
-			     1,
-			     "Titan Memory Extended Frame",
-			     el_titan_memory_extended_annotation),
-	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
-			     EL_TYPE__TERMINATION__TERMINATION,
-			     1,
-			     "Termination Subpacket",
-			     NULL)
-};
-
-static struct el_subpacket *
-el_process_regatta_subpacket(struct el_subpacket *header)
-{
-	if (header->class != EL_CLASS__REGATTA_FAMILY) {
-		printk("%s  ** Unexpected header CLASS %d TYPE %d, aborting\n",
-		       err_print_prefix,
-		       header->class, header->type);
-		return NULL;
-	}
-
-	switch(header->type) {
-	case EL_TYPE__REGATTA__PROCESSOR_ERROR_FRAME:
-	case EL_TYPE__REGATTA__SYSTEM_ERROR_FRAME:
-	case EL_TYPE__REGATTA__ENVIRONMENTAL_FRAME:
-	case EL_TYPE__REGATTA__PROCESSOR_DBL_ERROR_HALT:
-	case EL_TYPE__REGATTA__SYSTEM_DBL_ERROR_HALT:
-		printk("%s  ** Occurred on CPU %d:\n", 
-		       err_print_prefix,
-		       (int)header->by_type.regatta_frame.cpuid);
-		privateer_process_logout_frame((struct el_common *)
-			header->by_type.regatta_frame.data_start, 1);
-		break;
-	default:
-		printk("%s  ** REGATTA TYPE %d SUBPACKET\n", 
-		       err_print_prefix, header->type);
-		el_annotate_subpacket(header);
-		break;
-	}
-
-
-	return (struct el_subpacket *)((unsigned long)header + header->length);
-} 
-
-static struct el_subpacket_handler titan_subpacket_handler = 
-	SUBPACKET_HANDLER_INIT(EL_CLASS__REGATTA_FAMILY, 
-			       el_process_regatta_subpacket);
-
-void __init
-titan_register_error_handlers(void)
-{
-	size_t i;
-
-	for (i = 0; i < ARRAY_SIZE (el_titan_annotations); i++)
-		cdl_register_subpacket_annotation(&el_titan_annotations[i]);
-
-	cdl_register_subpacket_handler(&titan_subpacket_handler);
-
-	ev6_register_error_handlers();
-}
-
-
-/*
- * Privateer
- */
-
-static int
-privateer_process_680_frame(struct el_common *mchk_header, int print)
-{
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-#ifdef CONFIG_VERBOSE_MCHECK
-	struct el_PRIVATEER_envdata_mcheck *emchk =
-		(struct el_PRIVATEER_envdata_mcheck *)
-		((unsigned long)mchk_header + mchk_header->sys_offset);
-
-	/* TODO - categorize errors, for now, no error */
-
-	if (!print)
-		return status;
-
-	/* TODO - decode instead of just dumping... */
-	printk("%s  Summary Flags:         %016llx\n"
- 	         "  CChip DIRx:            %016llx\n"
-		 "  System Management IR:  %016llx\n"
-		 "  CPU IR:                %016llx\n"
-		 "  Power Supply IR:       %016llx\n"
-		 "  LM78 Fault Status:     %016llx\n"
-		 "  System Doors:          %016llx\n"
-		 "  Temperature Warning:   %016llx\n"
-		 "  Fan Control:           %016llx\n"
-		 "  Fatal Power Down Code: %016llx\n",
-	       err_print_prefix,
-	       emchk->summary,
-	       emchk->c_dirx,
-	       emchk->smir,
-	       emchk->cpuir,
-	       emchk->psir,
-	       emchk->fault,
-	       emchk->sys_doors,
-	       emchk->temp_warn,
-	       emchk->fan_ctrl,
-	       emchk->code);
-#endif /* CONFIG_VERBOSE_MCHECK */
-
-	return status;
-}
-
-int
-privateer_process_logout_frame(struct el_common *mchk_header, int print)
-{
-	struct el_common_EV6_mcheck *ev6mchk = 
-		(struct el_common_EV6_mcheck *)mchk_header;
-	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
-
-	/*
-	 * Machine check codes
-	 */
-#define PRIVATEER_MCHK__CORR_ECC		0x86	/* 630 */
-#define PRIVATEER_MCHK__DC_TAG_PERR		0x9E	/* 630 */
-#define PRIVATEER_MCHK__PAL_BUGCHECK		0x8E	/* 670 */
-#define PRIVATEER_MCHK__OS_BUGCHECK		0x90	/* 670 */
-#define PRIVATEER_MCHK__PROC_HRD_ERR		0x98	/* 670 */
-#define PRIVATEER_MCHK__ISTREAM_CMOV_PRX	0xA0	/* 670 */
-#define PRIVATEER_MCHK__ISTREAM_CMOV_FLT	0xA2	/* 670 */
-#define PRIVATEER_MCHK__SYS_HRD_ERR		0x202	/* 660 */
-#define PRIVATEER_MCHK__SYS_CORR_ERR		0x204	/* 620 */
-#define PRIVATEER_MCHK__SYS_ENVIRON		0x206	/* 680 */
-
-	switch(ev6mchk->MCHK_Code) {
-	/*
-	 * Vector 630 - Processor, Correctable
-	 */
-	case PRIVATEER_MCHK__CORR_ECC:
-	case PRIVATEER_MCHK__DC_TAG_PERR:
-		/*
-		 * Fall through to vector 670 for processing...
-		 */
-	/*
-	 * Vector 670 - Processor, Uncorrectable
-	 */
-	case PRIVATEER_MCHK__PAL_BUGCHECK:
-	case PRIVATEER_MCHK__OS_BUGCHECK:
-	case PRIVATEER_MCHK__PROC_HRD_ERR:
-	case PRIVATEER_MCHK__ISTREAM_CMOV_PRX:
-	case PRIVATEER_MCHK__ISTREAM_CMOV_FLT:
-		status |= ev6_process_logout_frame(mchk_header, print);
-		break;
-
-	/*
-	 * Vector 620 - System, Correctable
-	 */
-	case PRIVATEER_MCHK__SYS_CORR_ERR:
-		/*
-		 * Fall through to vector 660 for processing...
-		 */
-	/*
-	 * Vector 660 - System, Uncorrectable
-	 */
-	case PRIVATEER_MCHK__SYS_HRD_ERR:
-		status |= titan_process_logout_frame(mchk_header, print);
-		break;
-
-	/* 
-	 * Vector 680 - System, Environmental
-	 */
-	case PRIVATEER_MCHK__SYS_ENVIRON:	/* System, Environmental */
-		status |= privateer_process_680_frame(mchk_header, print);
-		break;
-
-	/* 
-	 * Unknown
-	 */
-	default:
-		status |= MCHK_DISPOSITION_REPORT;
-		if (print) {
-			printk("%s** Unknown Error, frame follows\n", 
-			       err_print_prefix);
-			mchk_dump_logout_frame(mchk_header);
-		}
-
-	}
-
-	return status;
-}
-
-void
-privateer_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header = (struct el_common *)la_ptr;
-	struct el_TITAN_sysdata_mcheck *tmchk =
-		(struct el_TITAN_sysdata_mcheck *)
-		(la_ptr + mchk_header->sys_offset);
-	u64 irqmask;
-	char *saved_err_prefix = err_print_prefix;
-
-#define PRIVATEER_680_INTERRUPT_MASK		(0xE00UL)
-#define PRIVATEER_HOTPLUG_INTERRUPT_MASK	(0xE00UL)
-
-	/*
-	 * Sync the processor.
-	 */
-	mb();
-	draina();
-
-	/* 
-	 * Only handle system events here.
-	 */
-	if (vector != SCB_Q_SYSEVENT) 
-		return titan_machine_check(vector, la_ptr);
-
-	/*
-	 * Report the event - System Events should be reported even if no
-	 * error is indicated since the event could indicate the return
-	 * to normal status.
-	 */
-	err_print_prefix = KERN_CRIT;
-	printk("%s*System Event (Vector 0x%x) reported on CPU %d:\n", 
-	       err_print_prefix,
-	       (unsigned int)vector, (int)smp_processor_id());
-	privateer_process_680_frame(mchk_header, 1);
-	err_print_prefix = saved_err_prefix;
-	
-	/* 
-	 * Convert any pending interrupts which report as 680 machine
-	 * checks to interrupts.
-	 */
-	irqmask = tmchk->c_dirx & PRIVATEER_680_INTERRUPT_MASK;
-
-	/*
-	 * Dispatch the interrupt(s).
-	 */
-	titan_dispatch_irqs(irqmask);
-
-	/* 
-	 * Release the logout frame.
-	 */
-	wrmces(0x7);
-	mb();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/es1888.c b/ANDROID_3.4.5/arch/alpha/kernel/es1888.c
deleted file mode 100644
index d584c85f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/es1888.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/es1888.c
- *
- * Init the built-in ES1888 sound chip (SB16 compatible)
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-void __init
-es1888_init(void)
-{
-	/* Sequence of IO reads to init the audio controller */
-	inb(0x0229);
-	inb(0x0229);
-	inb(0x0229);
-	inb(0x022b);
-	inb(0x0229);
-	inb(0x022b);
-	inb(0x0229);
-	inb(0x0229);
-	inb(0x022b);
-	inb(0x0229);
-	inb(0x0220); /* This sets the base address to 0x220 */
-
-	/* Sequence to set DMA channels */
-	outb(0x01, 0x0226);		/* reset */
-	inb(0x0226);			/* pause */
-	outb(0x00, 0x0226);		/* release reset */
-	while (!(inb(0x022e) & 0x80))	/* wait for bit 7 to assert*/
-		continue;
-	inb(0x022a);			/* pause */
-	outb(0xc6, 0x022c);		/* enable extended mode */
-	inb(0x022a);			/* pause, also forces the write */
-	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
-		continue;
-	outb(0xb1, 0x022c);		/* setup for write to Interrupt CR */
-	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
-		continue;
-	outb(0x14, 0x022c);		/* set IRQ 5 */
-	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
-		continue;
-	outb(0xb2, 0x022c);		/* setup for write to DMA CR */
-	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
-		continue;
-	outb(0x18, 0x022c);		/* set DMA channel 1 */
-	inb(0x022c);			/* force the write */
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/gct.c b/ANDROID_3.4.5/arch/alpha/kernel/gct.c
deleted file mode 100644
index c0c71554..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/gct.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/gct.c
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-
-#include <asm/hwrpb.h>
-#include <asm/gct.h>
-
-int
-gct6_find_nodes(gct6_node *node, gct6_search_struct *search)
-{
-	gct6_search_struct *wanted;
-	int status = 0;
-
-	/* First check the magic number.  */
-	if (node->magic != GCT_NODE_MAGIC) {
-		printk(KERN_ERR "GCT Node MAGIC incorrect - GCT invalid\n");
-		return -EINVAL;
-	}
-
-	/* Check against the search struct.  */
-	for (wanted = search; 
-	     wanted && (wanted->type | wanted->subtype); 
-	     wanted++) {
-		if (node->type != wanted->type)
-			continue;
-		if (node->subtype != wanted->subtype)
-			continue;
-
-		/* Found it -- call out.  */
-		if (wanted->callout)
-			wanted->callout(node);
-	}
-
-	/* Now walk the tree, siblings first.  */
-	if (node->next) 
-		status |= gct6_find_nodes(GCT_NODE_PTR(node->next), search);
-
-	/* Then the children.  */
-	if (node->child) 
-		status |= gct6_find_nodes(GCT_NODE_PTR(node->child), search);
-
-	return status;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/head.S b/ANDROID_3.4.5/arch/alpha/kernel/head.S
deleted file mode 100644
index c352499a..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/head.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/alpha/kernel/head.S
- *
- * initial boot stuff.. At this point, the bootloader has already
- * switched into OSF/1 PAL-code, and loaded us at the correct address
- * (START_ADDR).  So there isn't much left for us to do: just set up
- * the kernel global pointer and jump to the kernel entry-point.
- */
-
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/pal.h>
-#include <asm/setup.h>
-
-__HEAD
-.globl _stext
-	.set noreorder
-	.globl	__start
-	.ent	__start
-_stext:
-__start:
-	.prologue 0
-	br	$27,1f
-1:	ldgp	$29,0($27)
-	/* We need to get current_task_info loaded up...  */
-	lda	$8,init_thread_union
-	/* ... and find our stack ... */
-	lda	$30,0x4000 - SIZEOF_PT_REGS($8)
-	/* ... and then we can start the kernel.  */
-	jsr	$26,start_kernel
-	call_pal PAL_halt
-	.end __start
-
-#ifdef CONFIG_SMP
-	.align 3
-	.globl	__smp_callin
-	.ent	__smp_callin
-	/* On entry here from SRM console, the HWPCB of the per-cpu
-	   slot for this processor has been loaded.  We've arranged
-	   for the UNIQUE value for this process to contain the PCBB
-	   of the target idle task.  */
-__smp_callin:
-	.prologue 1
-	ldgp	$29,0($27)	# First order of business, load the GP.
-
-	call_pal PAL_rduniq	# Grab the target PCBB.
-	mov	$0,$16		# Install it.
-	call_pal PAL_swpctx
-
-	lda	$8,0x3fff	# Find "current".
-	bic	$30,$8,$8
-	
-	jsr	$26,smp_callin
-	call_pal PAL_halt
-	.end __smp_callin
-#endif /* CONFIG_SMP */
-
-	#
-	# The following two functions are needed for supporting SRM PALcode
-	# on the PC164 (at least), since that PALcode manages the interrupt
-	# masking, and we cannot duplicate the effort without causing problems
-	#
-
-	.align 3
-	.globl	cserve_ena
-	.ent	cserve_ena
-cserve_ena:
-	.prologue 0
-	bis	$16,$16,$17
-	lda	$16,52($31)
-	call_pal PAL_cserve
-	ret	($26)
-	.end	cserve_ena
-
-	.align 3
-	.globl	cserve_dis
-	.ent	cserve_dis
-cserve_dis:
-	.prologue 0
-	bis	$16,$16,$17
-	lda	$16,53($31)
-	call_pal PAL_cserve
-	ret	($26)
-	.end	cserve_dis
-
-	#
-	# It is handy, on occasion, to make halt actually just loop. 
-	# Putting it here means we dont have to recompile the whole
-	# kernel.
-	#
-
-	.align 3
-	.globl	halt
-	.ent	halt
-halt:
-	.prologue 0
-	call_pal PAL_halt
-	.end	halt
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/init_task.c b/ANDROID_3.4.5/arch/alpha/kernel/init_task.c
deleted file mode 100644
index 6f80ca4f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/init_task.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-#include <asm/uaccess.h>
-
-
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct task_struct init_task = INIT_TASK(init_task);
-EXPORT_SYMBOL(init_task);
-
-union thread_union init_thread_union __init_task_data =
-	{ INIT_THREAD_INFO(init_task) };
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/io.c b/ANDROID_3.4.5/arch/alpha/kernel/io.c
deleted file mode 100644
index 19c5875a..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/io.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * Alpha IO and memory functions.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <asm/io.h>
-
-/* Out-of-line versions of the i/o routines that redirect into the 
-   platform-specific version.  Note that "platform-specific" may mean
-   "generic", which bumps through the machine vector.  */
-
-unsigned int
-ioread8(void __iomem *addr)
-{
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
-	mb();
-	return ret;
-}
-
-unsigned int ioread16(void __iomem *addr)
-{
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
-	mb();
-	return ret;
-}
-
-unsigned int ioread32(void __iomem *addr)
-{
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
-	mb();
-	return ret;
-}
-
-void iowrite8(u8 b, void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
-	mb();
-}
-
-void iowrite16(u16 b, void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
-	mb();
-}
-
-void iowrite32(u32 b, void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
-	mb();
-}
-
-EXPORT_SYMBOL(ioread8);
-EXPORT_SYMBOL(ioread16);
-EXPORT_SYMBOL(ioread32);
-EXPORT_SYMBOL(iowrite8);
-EXPORT_SYMBOL(iowrite16);
-EXPORT_SYMBOL(iowrite32);
-
-u8 inb(unsigned long port)
-{
-	return ioread8(ioport_map(port, 1));
-}
-
-u16 inw(unsigned long port)
-{
-	return ioread16(ioport_map(port, 2));
-}
-
-u32 inl(unsigned long port)
-{
-	return ioread32(ioport_map(port, 4));
-}
-
-void outb(u8 b, unsigned long port)
-{
-	iowrite8(b, ioport_map(port, 1));
-}
-
-void outw(u16 b, unsigned long port)
-{
-	iowrite16(b, ioport_map(port, 2));
-}
-
-void outl(u32 b, unsigned long port)
-{
-	iowrite32(b, ioport_map(port, 4));
-}
-
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(outb);
-EXPORT_SYMBOL(outw);
-EXPORT_SYMBOL(outl);
-
-u8 __raw_readb(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readb)(addr);
-}
-
-u16 __raw_readw(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readw)(addr);
-}
-
-u32 __raw_readl(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readl)(addr);
-}
-
-u64 __raw_readq(const volatile void __iomem *addr)
-{
-	return IO_CONCAT(__IO_PREFIX,readq)(addr);
-}
-
-void __raw_writeb(u8 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writeb)(b, addr);
-}
-
-void __raw_writew(u16 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writew)(b, addr);
-}
-
-void __raw_writel(u32 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writel)(b, addr);
-}
-
-void __raw_writeq(u64 b, volatile void __iomem *addr)
-{
-	IO_CONCAT(__IO_PREFIX,writeq)(b, addr);
-}
-
-EXPORT_SYMBOL(__raw_readb); 
-EXPORT_SYMBOL(__raw_readw); 
-EXPORT_SYMBOL(__raw_readl); 
-EXPORT_SYMBOL(__raw_readq); 
-EXPORT_SYMBOL(__raw_writeb); 
-EXPORT_SYMBOL(__raw_writew); 
-EXPORT_SYMBOL(__raw_writel); 
-EXPORT_SYMBOL(__raw_writeq); 
-
-u8 readb(const volatile void __iomem *addr)
-{
-	u8 ret = __raw_readb(addr);
-	mb();
-	return ret;
-}
-
-u16 readw(const volatile void __iomem *addr)
-{
-	u16 ret = __raw_readw(addr);
-	mb();
-	return ret;
-}
-
-u32 readl(const volatile void __iomem *addr)
-{
-	u32 ret = __raw_readl(addr);
-	mb();
-	return ret;
-}
-
-u64 readq(const volatile void __iomem *addr)
-{
-	u64 ret = __raw_readq(addr);
-	mb();
-	return ret;
-}
-
-void writeb(u8 b, volatile void __iomem *addr)
-{
-	__raw_writeb(b, addr);
-	mb();
-}
-
-void writew(u16 b, volatile void __iomem *addr)
-{
-	__raw_writew(b, addr);
-	mb();
-}
-
-void writel(u32 b, volatile void __iomem *addr)
-{
-	__raw_writel(b, addr);
-	mb();
-}
-
-void writeq(u64 b, volatile void __iomem *addr)
-{
-	__raw_writeq(b, addr);
-	mb();
-}
-
-EXPORT_SYMBOL(readb);
-EXPORT_SYMBOL(readw);
-EXPORT_SYMBOL(readl);
-EXPORT_SYMBOL(readq);
-EXPORT_SYMBOL(writeb);
-EXPORT_SYMBOL(writew);
-EXPORT_SYMBOL(writel);
-EXPORT_SYMBOL(writeq);
-
-
-/*
- * Read COUNT 8-bit bytes from port PORT into memory starting at SRC.
- */
-void ioread8_rep(void __iomem *port, void *dst, unsigned long count)
-{
-	while ((unsigned long)dst & 0x3) {
-		if (!count)
-			return;
-		count--;
-		*(unsigned char *)dst = ioread8(port);
-		dst += 1;
-	}
-
-	while (count >= 4) {
-		unsigned int w;
-		count -= 4;
-		w = ioread8(port);
-		w |= ioread8(port) << 8;
-		w |= ioread8(port) << 16;
-		w |= ioread8(port) << 24;
-		*(unsigned int *)dst = w;
-		dst += 4;
-	}
-
-	while (count) {
-		--count;
-		*(unsigned char *)dst = ioread8(port);
-		dst += 1;
-	}
-}
-
-void insb(unsigned long port, void *dst, unsigned long count)
-{
-	ioread8_rep(ioport_map(port, 1), dst, count);
-}
-
-EXPORT_SYMBOL(ioread8_rep);
-EXPORT_SYMBOL(insb);
-
-/*
- * Read COUNT 16-bit words from port PORT into memory starting at
- * SRC.  SRC must be at least short aligned.  This is used by the
- * IDE driver to read disk sectors.  Performance is important, but
- * the interfaces seems to be slow: just using the inlined version
- * of the inw() breaks things.
- */
-void ioread16_rep(void __iomem *port, void *dst, unsigned long count)
-{
-	if (unlikely((unsigned long)dst & 0x3)) {
-		if (!count)
-			return;
-		BUG_ON((unsigned long)dst & 0x1);
-		count--;
-		*(unsigned short *)dst = ioread16(port);
-		dst += 2;
-	}
-
-	while (count >= 2) {
-		unsigned int w;
-		count -= 2;
-		w = ioread16(port);
-		w |= ioread16(port) << 16;
-		*(unsigned int *)dst = w;
-		dst += 4;
-	}
-
-	if (count) {
-		*(unsigned short*)dst = ioread16(port);
-	}
-}
-
-void insw(unsigned long port, void *dst, unsigned long count)
-{
-	ioread16_rep(ioport_map(port, 2), dst, count);
-}
-
-EXPORT_SYMBOL(ioread16_rep);
-EXPORT_SYMBOL(insw);
-
-
-/*
- * Read COUNT 32-bit words from port PORT into memory starting at
- * SRC. Now works with any alignment in SRC. Performance is important,
- * but the interfaces seems to be slow: just using the inlined version
- * of the inl() breaks things.
- */
-void ioread32_rep(void __iomem *port, void *dst, unsigned long count)
-{
-	if (unlikely((unsigned long)dst & 0x3)) {
-		while (count--) {
-			struct S { int x __attribute__((packed)); };
-			((struct S *)dst)->x = ioread32(port);
-			dst += 4;
-		}
-	} else {
-		/* Buffer 32-bit aligned.  */
-		while (count--) {
-			*(unsigned int *)dst = ioread32(port);
-			dst += 4;
-		}
-	}
-}
-
-void insl(unsigned long port, void *dst, unsigned long count)
-{
-	ioread32_rep(ioport_map(port, 4), dst, count);
-}
-
-EXPORT_SYMBOL(ioread32_rep);
-EXPORT_SYMBOL(insl);
-
-
-/*
- * Like insb but in the opposite direction.
- * Don't worry as much about doing aligned memory transfers:
- * doing byte reads the "slow" way isn't nearly as slow as
- * doing byte writes the slow way (no r-m-w cycle).
- */
-void iowrite8_rep(void __iomem *port, const void *xsrc, unsigned long count)
-{
-	const unsigned char *src = xsrc;
-	while (count--)
-		iowrite8(*src++, port);
-}
-
-void outsb(unsigned long port, const void *src, unsigned long count)
-{
-	iowrite8_rep(ioport_map(port, 1), src, count);
-}
-
-EXPORT_SYMBOL(iowrite8_rep);
-EXPORT_SYMBOL(outsb);
-
-
-/*
- * Like insw but in the opposite direction.  This is used by the IDE
- * driver to write disk sectors.  Performance is important, but the
- * interfaces seems to be slow: just using the inlined version of the
- * outw() breaks things.
- */
-void iowrite16_rep(void __iomem *port, const void *src, unsigned long count)
-{
-	if (unlikely((unsigned long)src & 0x3)) {
-		if (!count)
-			return;
-		BUG_ON((unsigned long)src & 0x1);
-		iowrite16(*(unsigned short *)src, port);
-		src += 2;
-		--count;
-	}
-
-	while (count >= 2) {
-		unsigned int w;
-		count -= 2;
-		w = *(unsigned int *)src;
-		src += 4;
-		iowrite16(w >>  0, port);
-		iowrite16(w >> 16, port);
-	}
-
-	if (count) {
-		iowrite16(*(unsigned short *)src, port);
-	}
-}
-
-void outsw(unsigned long port, const void *src, unsigned long count)
-{
-	iowrite16_rep(ioport_map(port, 2), src, count);
-}
-
-EXPORT_SYMBOL(iowrite16_rep);
-EXPORT_SYMBOL(outsw);
-
-
-/*
- * Like insl but in the opposite direction.  This is used by the IDE
- * driver to write disk sectors.  Works with any alignment in SRC.
- * Performance is important, but the interfaces seems to be slow:
- * just using the inlined version of the outl() breaks things.
- */
-void iowrite32_rep(void __iomem *port, const void *src, unsigned long count)
-{
-	if (unlikely((unsigned long)src & 0x3)) {
-		while (count--) {
-			struct S { int x __attribute__((packed)); };
-			iowrite32(((struct S *)src)->x, port);
-			src += 4;
-		}
-	} else {
-		/* Buffer 32-bit aligned.  */
-		while (count--) {
-			iowrite32(*(unsigned int *)src, port);
-			src += 4;
-		}
-	}
-}
-
-void outsl(unsigned long port, const void *src, unsigned long count)
-{
-	iowrite32_rep(ioport_map(port, 4), src, count);
-}
-
-EXPORT_SYMBOL(iowrite32_rep);
-EXPORT_SYMBOL(outsl);
-
-
-/*
- * Copy data from IO memory space to "real" memory space.
- * This needs to be optimized.
- */
-void memcpy_fromio(void *to, const volatile void __iomem *from, long count)
-{
-	/* Optimize co-aligned transfers.  Everything else gets handled
-	   a byte at a time. */
-
-	if (count >= 8 && ((u64)to & 7) == ((u64)from & 7)) {
-		count -= 8;
-		do {
-			*(u64 *)to = __raw_readq(from);
-			count -= 8;
-			to += 8;
-			from += 8;
-		} while (count >= 0);
-		count += 8;
-	}
-
-	if (count >= 4 && ((u64)to & 3) == ((u64)from & 3)) {
-		count -= 4;
-		do {
-			*(u32 *)to = __raw_readl(from);
-			count -= 4;
-			to += 4;
-			from += 4;
-		} while (count >= 0);
-		count += 4;
-	}
-
-	if (count >= 2 && ((u64)to & 1) == ((u64)from & 1)) {
-		count -= 2;
-		do {
-			*(u16 *)to = __raw_readw(from);
-			count -= 2;
-			to += 2;
-			from += 2;
-		} while (count >= 0);
-		count += 2;
-	}
-
-	while (count > 0) {
-		*(u8 *) to = __raw_readb(from);
-		count--;
-		to++;
-		from++;
-	}
-	mb();
-}
-
-EXPORT_SYMBOL(memcpy_fromio);
-
-
-/*
- * Copy data from "real" memory space to IO memory space.
- * This needs to be optimized.
- */
-void memcpy_toio(volatile void __iomem *to, const void *from, long count)
-{
-	/* Optimize co-aligned transfers.  Everything else gets handled
-	   a byte at a time. */
-	/* FIXME -- align FROM.  */
-
-	if (count >= 8 && ((u64)to & 7) == ((u64)from & 7)) {
-		count -= 8;
-		do {
-			__raw_writeq(*(const u64 *)from, to);
-			count -= 8;
-			to += 8;
-			from += 8;
-		} while (count >= 0);
-		count += 8;
-	}
-
-	if (count >= 4 && ((u64)to & 3) == ((u64)from & 3)) {
-		count -= 4;
-		do {
-			__raw_writel(*(const u32 *)from, to);
-			count -= 4;
-			to += 4;
-			from += 4;
-		} while (count >= 0);
-		count += 4;
-	}
-
-	if (count >= 2 && ((u64)to & 1) == ((u64)from & 1)) {
-		count -= 2;
-		do {
-			__raw_writew(*(const u16 *)from, to);
-			count -= 2;
-			to += 2;
-			from += 2;
-		} while (count >= 0);
-		count += 2;
-	}
-
-	while (count > 0) {
-		__raw_writeb(*(const u8 *) from, to);
-		count--;
-		to++;
-		from++;
-	}
-	mb();
-}
-
-EXPORT_SYMBOL(memcpy_toio);
-
-
-/*
- * "memset" on IO memory space.
- */
-void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
-{
-	/* Handle any initial odd byte */
-	if (count > 0 && ((u64)to & 1)) {
-		__raw_writeb(c, to);
-		to++;
-		count--;
-	}
-
-	/* Handle any initial odd halfword */
-	if (count >= 2 && ((u64)to & 2)) {
-		__raw_writew(c, to);
-		to += 2;
-		count -= 2;
-	}
-
-	/* Handle any initial odd word */
-	if (count >= 4 && ((u64)to & 4)) {
-		__raw_writel(c, to);
-		to += 4;
-		count -= 4;
-	}
-
-	/* Handle all full-sized quadwords: we're aligned
-	   (or have a small count) */
-	count -= 8;
-	if (count >= 0) {
-		do {
-			__raw_writeq(c, to);
-			to += 8;
-			count -= 8;
-		} while (count >= 0);
-	}
-	count += 8;
-
-	/* The tail is word-aligned if we still have count >= 4 */
-	if (count >= 4) {
-		__raw_writel(c, to);
-		to += 4;
-		count -= 4;
-	}
-
-	/* The tail is half-word aligned if we have count >= 2 */
-	if (count >= 2) {
-		__raw_writew(c, to);
-		to += 2;
-		count -= 2;
-	}
-
-	/* And finally, one last byte.. */
-	if (count) {
-		__raw_writeb(c, to);
-	}
-	mb();
-}
-
-EXPORT_SYMBOL(_memset_c_io);
-
-/* A version of memcpy used by the vga console routines to move data around
-   arbitrarily between screen and main memory.  */
-
-void
-scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
-{
-	const u16 __iomem *ios = (const u16 __iomem *) s;
-	u16 __iomem *iod = (u16 __iomem *) d;
-	int s_isio = __is_ioaddr(s);
-	int d_isio = __is_ioaddr(d);
-
-	if (s_isio) {
-		if (d_isio) {
-			/* FIXME: Should handle unaligned ops and
-			   operation widening.  */
-
-			count /= 2;
-			while (count--) {
-				u16 tmp = __raw_readw(ios++);
-				__raw_writew(tmp, iod++);
-			}
-		}
-		else
-			memcpy_fromio(d, ios, count);
-	} else {
-		if (d_isio)
-			memcpy_toio(iod, s, count);
-		else
-			memcpy(d, s, count);
-	}
-}
-
-EXPORT_SYMBOL(scr_memcpyw);
-
-void __iomem *ioport_map(unsigned long port, unsigned int size)
-{
-	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
-}
-
-void ioport_unmap(void __iomem *addr)
-{
-}
-
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/irq.c b/ANDROID_3.4.5/arch/alpha/kernel/irq.c
deleted file mode 100644
index 2872accd..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/irq.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/irq.c
- *
- *	Copyright (C) 1995 Linus Torvalds
- *
- * This file contains the code used by various IRQ handling routines:
- * asking for different IRQ's should be done through these routines
- * instead of just grabbing them. Thus setups with different IRQ numbers
- * shouldn't result in any weird surprises, and installing new handlers
- * should be easier.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/profile.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-volatile unsigned long irq_err_count;
-DEFINE_PER_CPU(unsigned long, irq_pmi_count);
-
-void ack_bad_irq(unsigned int irq)
-{
-	irq_err_count++;
-	printk(KERN_CRIT "Unexpected IRQ trap at vector %u\n", irq);
-}
-
-#ifdef CONFIG_SMP 
-static char irq_user_affinity[NR_IRQS];
-
-int irq_select_affinity(unsigned int irq)
-{
-	struct irq_data *data = irq_get_irq_data(irq);
-	struct irq_chip *chip;
-	static int last_cpu;
-	int cpu = last_cpu + 1;
-
-	if (!data)
-		return 1;
-	chip = irq_data_get_irq_chip(data);
-
-	if (!chip->irq_set_affinity || irq_user_affinity[irq])
-		return 1;
-
-	while (!cpu_possible(cpu) ||
-	       !cpumask_test_cpu(cpu, irq_default_affinity))
-		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
-	last_cpu = cpu;
-
-	cpumask_copy(data->affinity, cpumask_of(cpu));
-	chip->irq_set_affinity(data, cpumask_of(cpu), false);
-	return 0;
-}
-#endif /* CONFIG_SMP */
-
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
-	int j;
-
-#ifdef CONFIG_SMP
-	seq_puts(p, "IPI: ");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10lu ", cpu_data[j].ipi_count);
-	seq_putc(p, '\n');
-#endif
-	seq_puts(p, "PMI: ");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10lu ", per_cpu(irq_pmi_count, j));
-	seq_puts(p, "          Performance Monitoring\n");
-	seq_printf(p, "ERR: %10lu\n", irq_err_count);
-	return 0;
-}
-
-/*
- * handle_irq handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-
-#define MAX_ILLEGAL_IRQS 16
-
-void
-handle_irq(int irq)
-{	
-	/* 
-	 * We ack quickly, we don't want the irq controller
-	 * thinking we're snobs just because some other CPU has
-	 * disabled global interrupts (we have already done the
-	 * INT_ACK cycles, it's too late to try to pretend to the
-	 * controller that we aren't taking the interrupt).
-	 *
-	 * 0 return value means that this irq is already being
-	 * handled by some other CPU. (or is disabled)
-	 */
-	static unsigned int illegal_count=0;
-	struct irq_desc *desc = irq_to_desc(irq);
-	
-	if (!desc || ((unsigned) irq > ACTUAL_NR_IRQS &&
-	    illegal_count < MAX_ILLEGAL_IRQS)) {
-		irq_err_count++;
-		illegal_count++;
-		printk(KERN_CRIT "device_interrupt: invalid interrupt %d\n",
-		       irq);
-		return;
-	}
-
-	/*
-	 * From here we must proceed with IPL_MAX. Note that we do not
-	 * explicitly enable interrupts afterwards - some MILO PALcode
-	 * (namely LX164 one) seems to have severe problems with RTI
-	 * at IPL 0.
-	 */
-	local_irq_disable();
-	irq_enter();
-	generic_handle_irq_desc(irq, desc);
-	irq_exit();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/irq_alpha.c b/ANDROID_3.4.5/arch/alpha/kernel/irq_alpha.c
deleted file mode 100644
index 772ddfdb..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/irq_alpha.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Alpha specific irq code.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-
-#include <asm/machvec.h>
-#include <asm/dma.h>
-#include <asm/perf_event.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-
-/* Hack minimum IPL during interrupt processing for broken hardware.  */
-#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
-int __min_ipl;
-EXPORT_SYMBOL(__min_ipl);
-#endif
-
-/*
- * Performance counter hook.  A module can override this to
- * do something useful.
- */
-static void
-dummy_perf(unsigned long vector, struct pt_regs *regs)
-{
-	irq_err_count++;
-	printk(KERN_CRIT "Performance counter interrupt!\n");
-}
-
-void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;
-EXPORT_SYMBOL(perf_irq);
-
-/*
- * The main interrupt entry point.
- */
-
-asmlinkage void 
-do_entInt(unsigned long type, unsigned long vector,
-	  unsigned long la_ptr, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	switch (type) {
-	case 0:
-#ifdef CONFIG_SMP
-		handle_ipi(regs);
-		return;
-#else
-		irq_err_count++;
-		printk(KERN_CRIT "Interprocessor interrupt? "
-		       "You must be kidding!\n");
-#endif
-		break;
-	case 1:
-		old_regs = set_irq_regs(regs);
-#ifdef CONFIG_SMP
-	  {
-		long cpu;
-
-		local_irq_disable();
-		smp_percpu_timer_interrupt(regs);
-		cpu = smp_processor_id();
-		if (cpu != boot_cpuid) {
-		        kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ));
-		} else {
-			handle_irq(RTC_IRQ);
-		}
-	  }
-#else
-		handle_irq(RTC_IRQ);
-#endif
-		set_irq_regs(old_regs);
-		return;
-	case 2:
-		old_regs = set_irq_regs(regs);
-		alpha_mv.machine_check(vector, la_ptr);
-		set_irq_regs(old_regs);
-		return;
-	case 3:
-		old_regs = set_irq_regs(regs);
-		alpha_mv.device_interrupt(vector);
-		set_irq_regs(old_regs);
-		return;
-	case 4:
-		perf_irq(la_ptr, regs);
-		return;
-	default:
-		printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
-		       type, vector);
-	}
-	printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
-}
-
-void __init
-common_init_isa_dma(void)
-{
-	outb(0, DMA1_RESET_REG);
-	outb(0, DMA2_RESET_REG);
-	outb(0, DMA1_CLR_MASK_REG);
-	outb(0, DMA2_CLR_MASK_REG);
-}
-
-void __init
-init_IRQ(void)
-{
-	/* Just in case the platform init_irq() causes interrupts/mchecks
-	   (as is the case with RAWHIDE, at least).  */
-	wrent(entInt, 0);
-
-	alpha_mv.init_irq();
-}
-
-/*
- * machine error checks
- */
-#define MCHK_K_TPERR           0x0080
-#define MCHK_K_TCPERR          0x0082
-#define MCHK_K_HERR            0x0084
-#define MCHK_K_ECC_C           0x0086
-#define MCHK_K_ECC_NC          0x0088
-#define MCHK_K_OS_BUGCHECK     0x008A
-#define MCHK_K_PAL_BUGCHECK    0x0090
-
-#ifndef CONFIG_SMP
-struct mcheck_info __mcheck_info;
-#endif
-
-void
-process_mcheck_info(unsigned long vector, unsigned long la_ptr,
-		    const char *machine, int expected)
-{
-	struct el_common *mchk_header;
-	const char *reason;
-
-	/*
-	 * See if the machine check is due to a badaddr() and if so,
-	 * ignore it.
-	 */
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		printk(KERN_CRIT "%s machine check %s\n", machine,
-		       expected ? "expected." : "NOT expected!!!");
-	}
-#endif
-
-	if (expected) {
-		int cpu = smp_processor_id();
-		mcheck_expected(cpu) = 0;
-		mcheck_taken(cpu) = 1;
-		return;
-	}
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n",
-	       machine, vector, get_irq_regs()->pc, mchk_header->code);
-
-	switch (mchk_header->code) {
-	/* Machine check reasons.  Defined according to PALcode sources.  */
-	case 0x80: reason = "tag parity error"; break;
-	case 0x82: reason = "tag control parity error"; break;
-	case 0x84: reason = "generic hard error"; break;
-	case 0x86: reason = "correctable ECC error"; break;
-	case 0x88: reason = "uncorrectable ECC error"; break;
-	case 0x8A: reason = "OS-specific PAL bugcheck"; break;
-	case 0x90: reason = "callsys in kernel mode"; break;
-	case 0x96: reason = "i-cache read retryable error"; break;
-	case 0x98: reason = "processor detected hard error"; break;
-	
-	/* System specific (these are for Alcor, at least): */
-	case 0x202: reason = "system detected hard error"; break;
-	case 0x203: reason = "system detected uncorrectable ECC error"; break;
-	case 0x204: reason = "SIO SERR occurred on PCI bus"; break;
-	case 0x205: reason = "parity error detected by core logic"; break;
-	case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break;
-	case 0x207: reason = "non-existent memory error"; break;
-	case 0x208: reason = "MCHK_K_DCSR"; break;
-	case 0x209: reason = "PCI SERR detected"; break;
-	case 0x20b: reason = "PCI data parity error detected"; break;
-	case 0x20d: reason = "PCI address parity error detected"; break;
-	case 0x20f: reason = "PCI master abort error"; break;
-	case 0x211: reason = "PCI target abort error"; break;
-	case 0x213: reason = "scatter/gather PTE invalid error"; break;
-	case 0x215: reason = "flash ROM write error"; break;
-	case 0x217: reason = "IOA timeout detected"; break;
-	case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break;
-	case 0x21b: reason = "EISA fail-safe timer timeout"; break;
-	case 0x21d: reason = "EISA bus time-out"; break;
-	case 0x21f: reason = "EISA software generated NMI"; break;
-	case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break;
-	default: reason = "unknown"; break;
-	}
-
-	printk(KERN_CRIT "machine check type: %s%s\n",
-	       reason, mchk_header->retry ? " (retryable)" : "");
-
-	dik_show_regs(get_irq_regs(), NULL);
-
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		/* Dump the logout area to give all info.  */
-		unsigned long *ptr = (unsigned long *)la_ptr;
-		long i;
-		for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
-			printk(KERN_CRIT "   +%8lx %016lx %016lx\n",
-			       i*sizeof(long), ptr[i], ptr[i+1]);
-		}
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-/*
- * The special RTC interrupt type.  The interrupt itself was
- * processed by PALcode, and comes in via entInt vector 1.
- */
-
-struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "timer",
-};
-
-void __init
-init_rtc_irq(void)
-{
-	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
-				      handle_simple_irq, "RTC");
-	setup_irq(RTC_IRQ, &timer_irqaction);
-}
-
-/* Dummy irqactions.  */
-struct irqaction isa_cascade_irqaction = {
-	.handler	= no_action,
-	.name		= "isa-cascade"
-};
-
-struct irqaction timer_cascade_irqaction = {
-	.handler	= no_action,
-	.name		= "timer-cascade"
-};
-
-struct irqaction halt_switch_irqaction = {
-	.handler	= no_action,
-	.name		= "halt-switch"
-};
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/irq_i8259.c b/ANDROID_3.4.5/arch/alpha/kernel/irq_i8259.c
deleted file mode 100644
index e1861c77..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/irq_i8259.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *      linux/arch/alpha/kernel/irq_i8259.c
- *
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- *
- * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
- */
-
-#include <linux/init.h>
-#include <linux/cache.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned int cached_irq_mask = 0xffff;
-static DEFINE_SPINLOCK(i8259_irq_lock);
-
-static inline void
-i8259_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	int port = 0x21;
-	if (irq & 8) mask >>= 8;
-	if (irq & 8) port = 0xA1;
-	outb(mask, port);
-}
-
-inline void
-i8259a_enable_irq(struct irq_data *d)
-{
-	spin_lock(&i8259_irq_lock);
-	i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-	spin_unlock(&i8259_irq_lock);
-}
-
-static inline void
-__i8259a_disable_irq(unsigned int irq)
-{
-	i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
-}
-
-void
-i8259a_disable_irq(struct irq_data *d)
-{
-	spin_lock(&i8259_irq_lock);
-	__i8259a_disable_irq(d->irq);
-	spin_unlock(&i8259_irq_lock);
-}
-
-void
-i8259a_mask_and_ack_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	spin_lock(&i8259_irq_lock);
-	__i8259a_disable_irq(irq);
-
-	/* Ack the interrupt making it the lowest priority.  */
-	if (irq >= 8) {
-		outb(0xE0 | (irq - 8), 0xa0);   /* ack the slave */
-		irq = 2;
-	}
-	outb(0xE0 | irq, 0x20);			/* ack the master */
-	spin_unlock(&i8259_irq_lock);
-}
-
-struct irq_chip i8259a_irq_type = {
-	.name		= "XT-PIC",
-	.irq_unmask	= i8259a_enable_irq,
-	.irq_mask	= i8259a_disable_irq,
-	.irq_mask_ack	= i8259a_mask_and_ack_irq,
-};
-
-void __init
-init_i8259a_irqs(void)
-{
-	static struct irqaction cascade = {
-		.handler	= no_action,
-		.name		= "cascade",
-	};
-
-	long i;
-
-	outb(0xff, 0x21);	/* mask all of 8259A-1 */
-	outb(0xff, 0xA1);	/* mask all of 8259A-2 */
-
-	for (i = 0; i < 16; i++) {
-		irq_set_chip_and_handler(i, &i8259a_irq_type, handle_level_irq);
-	}
-
-	setup_irq(2, &cascade);
-}
-
-
-#if defined(CONFIG_ALPHA_GENERIC)
-# define IACK_SC	alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC	APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC	LCA_IACK_SC
-#elif defined(CONFIG_ALPHA_CIA)
-# define IACK_SC	CIA_IACK_SC
-#elif defined(CONFIG_ALPHA_PYXIS)
-# define IACK_SC	PYXIS_IACK_SC
-#elif defined(CONFIG_ALPHA_TITAN)
-# define IACK_SC	TITAN_IACK_SC
-#elif defined(CONFIG_ALPHA_TSUNAMI)
-# define IACK_SC	TSUNAMI_IACK_SC
-#elif defined(CONFIG_ALPHA_IRONGATE)
-# define IACK_SC        IRONGATE_IACK_SC
-#endif
-/* Note that CONFIG_ALPHA_POLARIS is intentionally left out here, since
-   sys_rx164 wants to use isa_no_iack_sc_device_interrupt for some reason.  */
-
-#if defined(IACK_SC)
-void
-isa_device_interrupt(unsigned long vector)
-{
-	/*
-	 * Generate a PCI interrupt acknowledge cycle.  The PIC will
-	 * respond with the interrupt vector of the highest priority
-	 * interrupt that is pending.  The PALcode sets up the
-	 * interrupts vectors such that irq level L generates vector L.
-	 */
-	int j = *(vuip) IACK_SC;
-	j &= 0xff;
-	handle_irq(j);
-}
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC)
-void
-isa_no_iack_sc_device_interrupt(unsigned long vector)
-{
-	unsigned long pic;
-
-	/*
-	 * It seems to me that the probability of two or more *device*
-	 * interrupts occurring at almost exactly the same time is
-	 * pretty low.  So why pay the price of checking for
-	 * additional interrupts here if the common case can be
-	 * handled so much easier?
-	 */
-	/* 
-	 *  The first read of gives you *all* interrupting lines.
-	 *  Therefore, read the mask register and and out those lines
-	 *  not enabled.  Note that some documentation has 21 and a1 
-	 *  write only.  This is not true.
-	 */
-	pic = inb(0x20) | (inb(0xA0) << 8);	/* read isr */
-	pic &= 0xFFFB;				/* mask out cascade & hibits */
-
-	while (pic) {
-		int j = ffz(~pic);
-		pic &= pic - 1;
-		handle_irq(j);
-	}
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/irq_impl.h b/ANDROID_3.4.5/arch/alpha/kernel/irq_impl.h
deleted file mode 100644
index d507a234..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/irq_impl.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/irq_impl.h
- *
- *	Copyright (C) 1995 Linus Torvalds
- *	Copyright (C) 1998, 2000 Richard Henderson
- *
- * This file contains declarations and inline functions for interfacing
- * with the IRQ handling routines in irq.c.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/profile.h>
-
-
-#define RTC_IRQ    8
-
-extern void isa_device_interrupt(unsigned long);
-extern void isa_no_iack_sc_device_interrupt(unsigned long);
-extern void srm_device_interrupt(unsigned long);
-extern void pyxis_device_interrupt(unsigned long);
-
-extern struct irqaction timer_irqaction;
-extern struct irqaction isa_cascade_irqaction;
-extern struct irqaction timer_cascade_irqaction;
-extern struct irqaction halt_switch_irqaction;
-
-extern void init_srm_irqs(long, unsigned long);
-extern void init_pyxis_irqs(unsigned long);
-extern void init_rtc_irq(void);
-
-extern void common_init_isa_dma(void);
-
-extern void i8259a_enable_irq(struct irq_data *d);
-extern void i8259a_disable_irq(struct irq_data *d);
-extern void i8259a_mask_and_ack_irq(struct irq_data *d);
-extern struct irq_chip i8259a_irq_type;
-extern void init_i8259a_irqs(void);
-
-extern void handle_irq(int irq);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/irq_pyxis.c b/ANDROID_3.4.5/arch/alpha/kernel/irq_pyxis.c
deleted file mode 100644
index 13c97a5b..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/irq_pyxis.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/irq_pyxis.c
- *
- * Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
- *
- * IRQ Code common to all PYXIS core logic chips.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/core_cia.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-
-
-/* Note mask bit is true for ENABLED irqs.  */
-static unsigned long cached_irq_mask;
-
-static inline void
-pyxis_update_irq_hw(unsigned long mask)
-{
-	*(vulp)PYXIS_INT_MASK = mask;
-	mb();
-	*(vulp)PYXIS_INT_MASK;
-}
-
-static inline void
-pyxis_enable_irq(struct irq_data *d)
-{
-	pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
-}
-
-static void
-pyxis_disable_irq(struct irq_data *d)
-{
-	pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
-}
-
-static void
-pyxis_mask_and_ack_irq(struct irq_data *d)
-{
-	unsigned long bit = 1UL << (d->irq - 16);
-	unsigned long mask = cached_irq_mask &= ~bit;
-
-	/* Disable the interrupt.  */
-	*(vulp)PYXIS_INT_MASK = mask;
-	wmb();
-	/* Ack PYXIS PCI interrupt.  */
-	*(vulp)PYXIS_INT_REQ = bit;
-	mb();
-	/* Re-read to force both writes.  */
-	*(vulp)PYXIS_INT_MASK;
-}
-
-static struct irq_chip pyxis_irq_type = {
-	.name		= "PYXIS",
-	.irq_mask_ack	= pyxis_mask_and_ack_irq,
-	.irq_mask	= pyxis_disable_irq,
-	.irq_unmask	= pyxis_enable_irq,
-};
-
-void 
-pyxis_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary register of PYXIS */
-	pld = *(vulp)PYXIS_INT_REQ;
-	pld &= cached_irq_mask;
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1; /* clear least bit set */
-		if (i == 7)
-			isa_device_interrupt(vector);
-		else
-			handle_irq(16+i);
-	}
-}
-
-void __init
-init_pyxis_irqs(unsigned long ignore_mask)
-{
-	long i;
-
-	*(vulp)PYXIS_INT_MASK = 0;		/* disable all */
-	*(vulp)PYXIS_INT_REQ  = -1;		/* flush all */
-	mb();
-
-	/* Send -INTA pulses to clear any pending interrupts ...*/
-	*(vuip) CIA_IACK_SC;
-
-	for (i = 16; i < 48; ++i) {
-		if ((ignore_mask >> i) & 1)
-			continue;
-		irq_set_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	setup_irq(16+7, &isa_cascade_irqaction);
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/irq_srm.c b/ANDROID_3.4.5/arch/alpha/kernel/irq_srm.c
deleted file mode 100644
index a79fa30e..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/irq_srm.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Handle interrupts from the SRM, assuming no additional weirdness.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-
-
-/*
- * Is the palcode SMP safe? In other words: can we call cserve_ena/dis
- * at the same time in multiple CPUs? To be safe I added a spinlock
- * but it can be removed trivially if the palcode is robust against smp.
- */
-DEFINE_SPINLOCK(srm_irq_lock);
-
-static inline void
-srm_enable_irq(struct irq_data *d)
-{
-	spin_lock(&srm_irq_lock);
-	cserve_ena(d->irq - 16);
-	spin_unlock(&srm_irq_lock);
-}
-
-static void
-srm_disable_irq(struct irq_data *d)
-{
-	spin_lock(&srm_irq_lock);
-	cserve_dis(d->irq - 16);
-	spin_unlock(&srm_irq_lock);
-}
-
-/* Handle interrupts from the SRM, assuming no additional weirdness.  */
-static struct irq_chip srm_irq_type = {
-	.name		= "SRM",
-	.irq_unmask	= srm_enable_irq,
-	.irq_mask	= srm_disable_irq,
-	.irq_mask_ack	= srm_disable_irq,
-};
-
-void __init
-init_srm_irqs(long max, unsigned long ignore_mask)
-{
-	long i;
-
-	if (NR_IRQS <= 16)
-		return;
-	for (i = 16; i < max; ++i) {
-		if (i < 64 && ((ignore_mask >> i) & 1))
-			continue;
-		irq_set_chip_and_handler(i, &srm_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-}
-
-void 
-srm_device_interrupt(unsigned long vector)
-{
-	int irq = (vector - 0x800) >> 4;
-	handle_irq(irq);
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/machvec_impl.h b/ANDROID_3.4.5/arch/alpha/kernel/machvec_impl.h
deleted file mode 100644
index 7fa62488..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/machvec_impl.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/machvec_impl.h
- *
- *	Copyright (C) 1997, 1998  Richard Henderson
- *
- * This file has goodies to help simplify instantiation of machine vectors.
- */
-
-#include <asm/pgalloc.h>
-
-/* Whee.  These systems don't have an HAE:
-       IRONGATE, MARVEL, POLARIS, TSUNAMI, TITAN, WILDFIRE
-   Fix things up for the GENERIC kernel by defining the HAE address
-   to be that of the cache. Now we can read and write it as we like.  ;-)  */
-#define IRONGATE_HAE_ADDRESS	(&alpha_mv.hae_cache)
-#define MARVEL_HAE_ADDRESS	(&alpha_mv.hae_cache)
-#define POLARIS_HAE_ADDRESS	(&alpha_mv.hae_cache)
-#define TSUNAMI_HAE_ADDRESS	(&alpha_mv.hae_cache)
-#define TITAN_HAE_ADDRESS	(&alpha_mv.hae_cache)
-#define WILDFIRE_HAE_ADDRESS	(&alpha_mv.hae_cache)
-
-#ifdef CIA_ONE_HAE_WINDOW
-#define CIA_HAE_ADDRESS		(&alpha_mv.hae_cache)
-#endif
-#ifdef MCPCIA_ONE_HAE_WINDOW
-#define MCPCIA_HAE_ADDRESS	(&alpha_mv.hae_cache)
-#endif
-#ifdef T2_ONE_HAE_WINDOW
-#define T2_HAE_ADDRESS		(&alpha_mv.hae_cache)
-#endif
-
-/* Only a few systems don't define IACK_SC, handling all interrupts through
-   the SRM console.  But splitting out that one case from IO() below
-   seems like such a pain.  Define this to get things to compile.  */
-#define JENSEN_IACK_SC		1
-#define T2_IACK_SC		1
-#define WILDFIRE_IACK_SC	1 /* FIXME */
-
-/*
- * Some helpful macros for filling in the blanks.
- */
-
-#define CAT1(x,y)  x##y
-#define CAT(x,y)   CAT1(x,y)
-
-#define DO_DEFAULT_RTC \
-	.rtc_port = 0x70, \
-	.rtc_get_time = common_get_rtc_time, \
-	.rtc_set_time = common_set_rtc_time
-
-#define DO_EV4_MMU							\
-	.max_asn =			EV4_MAX_ASN,			\
-	.mv_switch_mm =			ev4_switch_mm,			\
-	.mv_activate_mm =		ev4_activate_mm,		\
-	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page
-
-#define DO_EV5_MMU							\
-	.max_asn =			EV5_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
-
-#define DO_EV6_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
-
-#define DO_EV7_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
-
-#define IO_LITE(UP,low)							\
-	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\
-	.iack_sc =		CAT(UP,_IACK_SC),			\
-	.mv_ioread8 =		CAT(low,_ioread8),			\
-	.mv_ioread16 =		CAT(low,_ioread16),			\
-	.mv_ioread32 =		CAT(low,_ioread32),			\
-	.mv_iowrite8 =		CAT(low,_iowrite8),			\
-	.mv_iowrite16 =		CAT(low,_iowrite16),			\
-	.mv_iowrite32 =		CAT(low,_iowrite32),			\
-	.mv_readb =		CAT(low,_readb),			\
-	.mv_readw =		CAT(low,_readw),			\
-	.mv_readl =		CAT(low,_readl),			\
-	.mv_readq =		CAT(low,_readq),			\
-	.mv_writeb =		CAT(low,_writeb),			\
-	.mv_writew =		CAT(low,_writew),			\
-	.mv_writel =		CAT(low,_writel),			\
-	.mv_writeq =		CAT(low,_writeq),			\
-	.mv_ioportmap =		CAT(low,_ioportmap),			\
-	.mv_ioremap =		CAT(low,_ioremap),			\
-	.mv_iounmap =		CAT(low,_iounmap),			\
-	.mv_is_ioaddr =		CAT(low,_is_ioaddr),			\
-	.mv_is_mmio =		CAT(low,_is_mmio)			\
-
-#define IO(UP,low)							\
-	IO_LITE(UP,low),						\
-	.pci_ops =		&CAT(low,_pci_ops),			\
-	.mv_pci_tbi =		CAT(low,_pci_tbi)
-
-#define DO_APECS_IO	IO(APECS,apecs)
-#define DO_CIA_IO	IO(CIA,cia)
-#define DO_IRONGATE_IO	IO(IRONGATE,irongate)
-#define DO_LCA_IO	IO(LCA,lca)
-#define DO_MARVEL_IO	IO(MARVEL,marvel)
-#define DO_MCPCIA_IO	IO(MCPCIA,mcpcia)
-#define DO_POLARIS_IO	IO(POLARIS,polaris)
-#define DO_T2_IO	IO(T2,t2)
-#define DO_TSUNAMI_IO	IO(TSUNAMI,tsunami)
-#define DO_TITAN_IO	IO(TITAN,titan)
-#define DO_WILDFIRE_IO	IO(WILDFIRE,wildfire)
-
-#define DO_PYXIS_IO	IO_LITE(CIA,cia_bwx), \
-			.pci_ops = &cia_pci_ops, \
-			.mv_pci_tbi = cia_pci_tbi
-
-/*
- * In a GENERIC kernel, we have lots of these vectors floating about,
- * all but one of which we want to go away.  In a non-GENERIC kernel,
- * we want only one, ever.
- *
- * Accomplish this in the GENERIC kernel by putting all of the vectors
- * in the .init.data section where they'll go away.  We'll copy the
- * one we want to the real alpha_mv vector in setup_arch.
- *
- * Accomplish this in a non-GENERIC kernel by ifdef'ing out all but
- * one of the vectors, which will not reside in .init.data.  We then
- * alias this one vector to alpha_mv, so no copy is needed.
- *
- * Upshot: set __initdata to nothing for non-GENERIC kernels.
- */
-
-#ifdef CONFIG_ALPHA_GENERIC
-#define __initmv __initdata
-#define ALIAS_MV(x)
-#else
-#define __initmv __initdata_refok
-
-/* GCC actually has a syntax for defining aliases, but is under some
-   delusion that you shouldn't be able to declare it extern somewhere
-   else beforehand.  Fine.  We'll do it ourselves.  */
-#if 0
-#define ALIAS_MV(system) \
-  struct alpha_machine_vector alpha_mv __attribute__((alias(#system "_mv")));
-#else
-#define ALIAS_MV(system) \
-  asm(".global alpha_mv\nalpha_mv = " #system "_mv");
-#endif
-#endif /* GENERIC */
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/module.c b/ANDROID_3.4.5/arch/alpha/kernel/module.c
deleted file mode 100644
index 2fd00b70..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/module.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*  Kernel module help for Alpha.
-    Copyright (C) 2002 Richard Henderson.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-/* Allocate the GOT at the end of the core sections.  */
-
-struct got_entry {
-	struct got_entry *next;
-	Elf64_Sxword r_addend;
-	int got_offset;
-};
-
-static inline void
-process_reloc_for_got(Elf64_Rela *rela,
-		      struct got_entry *chains, Elf64_Xword *poffset)
-{
-	unsigned long r_sym = ELF64_R_SYM (rela->r_info);
-	unsigned long r_type = ELF64_R_TYPE (rela->r_info);
-	Elf64_Sxword r_addend = rela->r_addend;
-	struct got_entry *g;
-
-	if (r_type != R_ALPHA_LITERAL)
-		return;
-
-	for (g = chains + r_sym; g ; g = g->next)
-		if (g->r_addend == r_addend) {
-			if (g->got_offset == 0) {
-				g->got_offset = *poffset;
-				*poffset += 8;
-			}
-			goto found_entry;
-		}
-
-	g = kmalloc (sizeof (*g), GFP_KERNEL);
-	g->next = chains[r_sym].next;
-	g->r_addend = r_addend;
-	g->got_offset = *poffset;
-	*poffset += 8;
-	chains[r_sym].next = g;
-
- found_entry:
-	/* Trick: most of the ELF64_R_TYPE field is unused.  There are
-	   42 valid relocation types, and a 32-bit field.  Co-opt the
-	   bits above 256 to store the got offset for this reloc.  */
-	rela->r_info |= g->got_offset << 8;
-}
-
-int
-module_frob_arch_sections(Elf64_Ehdr *hdr, Elf64_Shdr *sechdrs,
-			  char *secstrings, struct module *me)
-{
-	struct got_entry *chains;
-	Elf64_Rela *rela;
-	Elf64_Shdr *esechdrs, *symtab, *s, *got;
-	unsigned long nsyms, nrela, i;
-
-	esechdrs = sechdrs + hdr->e_shnum;
-	symtab = got = NULL;
-
-	/* Find out how large the symbol table is.  Allocate one got_entry
-	   head per symbol.  Normally this will be enough, but not always.
-	   We'll chain different offsets for the symbol down each head.  */
-	for (s = sechdrs; s < esechdrs; ++s)
-		if (s->sh_type == SHT_SYMTAB)
-			symtab = s;
-		else if (!strcmp(".got", secstrings + s->sh_name)) {
-			got = s;
-			me->arch.gotsecindex = s - sechdrs;
-		}
-
-	if (!symtab) {
-		printk(KERN_ERR "module %s: no symbol table\n", me->name);
-		return -ENOEXEC;
-	}
-	if (!got) {
-		printk(KERN_ERR "module %s: no got section\n", me->name);
-		return -ENOEXEC;
-	}
-
-	nsyms = symtab->sh_size / sizeof(Elf64_Sym);
-	chains = kcalloc(nsyms, sizeof(struct got_entry), GFP_KERNEL);
-	if (!chains) {
-		printk(KERN_ERR
-		       "module %s: no memory for symbol chain buffer\n",
-		       me->name);
-		return -ENOMEM;
-	}
-
-	got->sh_size = 0;
-	got->sh_addralign = 8;
-	got->sh_type = SHT_NOBITS;
-
-	/* Examine all LITERAL relocations to find out what GOT entries
-	   are required.  This sizes the GOT section as well.  */
-	for (s = sechdrs; s < esechdrs; ++s)
-		if (s->sh_type == SHT_RELA) {
-			nrela = s->sh_size / sizeof(Elf64_Rela);
-			rela = (void *)hdr + s->sh_offset;
-			for (i = 0; i < nrela; ++i)
-				process_reloc_for_got(rela+i, chains,
-						      &got->sh_size);
-		}
-
-	/* Free the memory we allocated.  */
-	for (i = 0; i < nsyms; ++i) {
-		struct got_entry *g, *n;
-		for (g = chains[i].next; g ; g = n) {
-			n = g->next;
-			kfree(g);
-		}
-	}
-	kfree(chains);
-
-	return 0;
-}
-
-int
-apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
-		   unsigned int symindex, unsigned int relsec,
-		   struct module *me)
-{
-	Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-	unsigned long i, n = sechdrs[relsec].sh_size / sizeof(*rela);
-	Elf64_Sym *symtab, *sym;
-	void *base, *location;
-	unsigned long got, gp;
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-
-	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
-	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
-
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->module_core + me->core_size - 0x8000;
-	got = sechdrs[me->arch.gotsecindex].sh_addr;
-
-	for (i = 0; i < n; i++) {
-		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
-		unsigned long r_type = ELF64_R_TYPE (rela[i].r_info);
-		unsigned long r_got_offset = r_type >> 8;
-		unsigned long value, hi, lo;
-		r_type &= 0xff;
-
-		/* This is where to make the change.  */
-		location = base + rela[i].r_offset;
-
-		/* This is the symbol it is referring to.  Note that all
-		   unresolved symbols have been resolved.  */
-		sym = symtab + r_sym;
-		value = sym->st_value + rela[i].r_addend;
-
-		switch (r_type) {
-		case R_ALPHA_NONE:
-			break;
-		case R_ALPHA_REFQUAD:
-			/* BUG() can produce misaligned relocations. */
-			((u32 *)location)[0] = value;
-			((u32 *)location)[1] = value >> 32;
-			break;
-		case R_ALPHA_GPREL32:
-			value -= gp;
-			if ((int)value != value)
-				goto reloc_overflow;
-			*(u32 *)location = value;
-			break;
-		case R_ALPHA_LITERAL:
-			hi = got + r_got_offset;
-			lo = hi - gp;
-			if ((short)lo != lo)
-				goto reloc_overflow;
-			*(u16 *)location = lo;
-			*(u64 *)hi = value;
-			break;
-		case R_ALPHA_LITUSE:
-			break;
-		case R_ALPHA_GPDISP:
-			value = gp - (u64)location;
-			lo = (short)value;
-			hi = (int)(value - lo);
-			if (hi + lo != value)
-				goto reloc_overflow;
-			*(u16 *)location = hi >> 16;
-			*(u16 *)(location + rela[i].r_addend) = lo;
-			break;
-		case R_ALPHA_BRSGP:
-			/* BRSGP is only allowed to bind to local symbols.
-			   If the section is undef, this means that the
-			   value was resolved from somewhere else.  */
-			if (sym->st_shndx == SHN_UNDEF)
-				goto reloc_overflow;
-			if ((sym->st_other & STO_ALPHA_STD_GPLOAD) ==
-			    STO_ALPHA_STD_GPLOAD)
-				/* Omit the prologue. */
-				value += 8;
-			/* FALLTHRU */
-		case R_ALPHA_BRADDR:
-			value -= (u64)location + 4;
-			if (value & 3)
-				goto reloc_overflow;
-			value = (long)value >> 2;
-			if (value + (1<<21) >= 1<<22)
-				goto reloc_overflow;
-			value &= 0x1fffff;
-			value |= *(u32 *)location & ~0x1fffff;
-			*(u32 *)location = value;
-			break;
-		case R_ALPHA_HINT:
-			break;
-		case R_ALPHA_SREL32:
-			value -= (u64)location;
-			if ((int)value != value)
-				goto reloc_overflow;
-			*(u32 *)location = value;
-			break;
-		case R_ALPHA_SREL64:
-			value -= (u64)location;
-			*(u64 *)location = value;
-			break;
-		case R_ALPHA_GPRELHIGH:
-			value = (long)(value - gp + 0x8000) >> 16;
-			if ((short) value != value)
-				goto reloc_overflow;
-			*(u16 *)location = value;
-			break;
-		case R_ALPHA_GPRELLOW:
-			value -= gp;
-			*(u16 *)location = value;
-			break;
-		case R_ALPHA_GPREL16:
-			value -= gp;
-			if ((short) value != value)
-				goto reloc_overflow;
-			*(u16 *)location = value;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %lu\n",
-			       me->name, r_type);
-			return -ENOEXEC;
-		reloc_overflow:
-			if (ELF64_ST_TYPE (sym->st_info) == STT_SECTION)
-			  printk(KERN_ERR
-			         "module %s: Relocation (type %lu) overflow vs section %d\n",
-			         me->name, r_type, sym->st_shndx);
-			else
-			  printk(KERN_ERR
-			         "module %s: Relocation (type %lu) overflow vs %s\n",
-			         me->name, r_type, strtab + sym->st_name);
-			return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/osf_sys.c b/ANDROID_3.4.5/arch/alpha/kernel/osf_sys.c
deleted file mode 100644
index 49ee3193..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/osf_sys.c
+++ /dev/null
@@ -1,1240 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/osf_sys.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/*
- * This file handles some of the stranger OSF/1 system call interfaces.
- * Some of the system calls expect a non-C calling standard, others have
- * special parameter blocks..
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/syscalls.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/utsname.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/major.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/shm.h>
-#include <linux/poll.h>
-#include <linux/file.h>
-#include <linux/types.h>
-#include <linux/ipc.h>
-#include <linux/namei.h>
-#include <linux/uio.h>
-#include <linux/vfs.h>
-#include <linux/rcupdate.h>
-#include <linux/slab.h>
-
-#include <asm/fpu.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/sysinfo.h>
-#include <asm/thread_info.h>
-#include <asm/hwrpb.h>
-#include <asm/processor.h>
-
-/*
- * Brk needs to return an error.  Still support Linux's brk(0) query idiom,
- * which OSF programs just shouldn't be doing.  We're still not quite
- * identical to OSF as we don't return 0 on success, but doing otherwise
- * would require changes to libc.  Hopefully this is good enough.
- */
-SYSCALL_DEFINE1(osf_brk, unsigned long, brk)
-{
-	unsigned long retval = sys_brk(brk);
-	if (brk && brk != retval)
-		retval = -ENOMEM;
-	return retval;
-}
- 
-/*
- * This is pure guess-work..
- */
-SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
-		unsigned long, text_len, unsigned long, bss_start,
-		unsigned long, bss_len)
-{
-	struct mm_struct *mm;
-
-	mm = current->mm;
-	mm->end_code = bss_start + bss_len;
-	mm->start_brk = bss_start + bss_len;
-	mm->brk = bss_start + bss_len;
-#if 0
-	printk("set_program_attributes(%lx %lx %lx %lx)\n",
-		text_start, text_len, bss_start, bss_len);
-#endif
-	return 0;
-}
-
-/*
- * OSF/1 directory handling functions...
- *
- * The "getdents()" interface is much more sane: the "basep" stuff is
- * braindamage (it can't really handle filesystems where the directory
- * offset differences aren't the same as "d_reclen").
- */
-#define NAME_OFFSET	offsetof (struct osf_dirent, d_name)
-
-struct osf_dirent {
-	unsigned int d_ino;
-	unsigned short d_reclen;
-	unsigned short d_namlen;
-	char d_name[1];
-};
-
-struct osf_dirent_callback {
-	struct osf_dirent __user *dirent;
-	long __user *basep;
-	unsigned int count;
-	int error;
-};
-
-static int
-osf_filldir(void *__buf, const char *name, int namlen, loff_t offset,
-	    u64 ino, unsigned int d_type)
-{
-	struct osf_dirent __user *dirent;
-	struct osf_dirent_callback *buf = (struct osf_dirent_callback *) __buf;
-	unsigned int reclen = ALIGN(NAME_OFFSET + namlen + 1, sizeof(u32));
-	unsigned int d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
-		buf->error = -EOVERFLOW;
-		return -EOVERFLOW;
-	}
-	if (buf->basep) {
-		if (put_user(offset, buf->basep))
-			goto Efault;
-		buf->basep = NULL;
-	}
-	dirent = buf->dirent;
-	if (put_user(d_ino, &dirent->d_ino) ||
-	    put_user(namlen, &dirent->d_namlen) ||
-	    put_user(reclen, &dirent->d_reclen) ||
-	    copy_to_user(dirent->d_name, name, namlen) ||
-	    put_user(0, dirent->d_name + namlen))
-		goto Efault;
-	dirent = (void __user *)dirent + reclen;
-	buf->dirent = dirent;
-	buf->count -= reclen;
-	return 0;
-Efault:
-	buf->error = -EFAULT;
-	return -EFAULT;
-}
-
-SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
-		struct osf_dirent __user *, dirent, unsigned int, count,
-		long __user *, basep)
-{
-	int error;
-	struct file *file;
-	struct osf_dirent_callback buf;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.dirent = dirent;
-	buf.basep = basep;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, osf_filldir, &buf);
-	if (error >= 0)
-		error = buf.error;
-	if (count != buf.count)
-		error = count - buf.count;
-
-	fput(file);
- out:
-	return error;
-}
-
-#undef NAME_OFFSET
-
-SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len,
-		unsigned long, prot, unsigned long, flags, unsigned long, fd,
-		unsigned long, off)
-{
-	unsigned long ret = -EINVAL;
-
-#if 0
-	if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED))
-		printk("%s: unimplemented OSF mmap flags %04lx\n", 
-			current->comm, flags);
-#endif
-	if ((off + PAGE_ALIGN(len)) < off)
-		goto out;
-	if (off & ~PAGE_MASK)
-		goto out;
-	ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
- out:
-	return ret;
-}
-
-
-/*
- * The OSF/1 statfs structure is much larger, but this should
- * match the beginning, at least.
- */
-struct osf_statfs {
-	short f_type;
-	short f_flags;
-	int f_fsize;
-	int f_bsize;
-	int f_blocks;
-	int f_bfree;
-	int f_bavail;
-	int f_files;
-	int f_ffree;
-	__kernel_fsid_t f_fsid;
-};
-
-static int
-linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_stat,
-		    unsigned long bufsiz)
-{
-	struct osf_statfs tmp_stat;
-
-	tmp_stat.f_type = linux_stat->f_type;
-	tmp_stat.f_flags = 0;	/* mount flags */
-	tmp_stat.f_fsize = linux_stat->f_frsize;
-	tmp_stat.f_bsize = linux_stat->f_bsize;
-	tmp_stat.f_blocks = linux_stat->f_blocks;
-	tmp_stat.f_bfree = linux_stat->f_bfree;
-	tmp_stat.f_bavail = linux_stat->f_bavail;
-	tmp_stat.f_files = linux_stat->f_files;
-	tmp_stat.f_ffree = linux_stat->f_ffree;
-	tmp_stat.f_fsid = linux_stat->f_fsid;
-	if (bufsiz > sizeof(tmp_stat))
-		bufsiz = sizeof(tmp_stat);
-	return copy_to_user(osf_stat, &tmp_stat, bufsiz) ? -EFAULT : 0;
-}
-
-SYSCALL_DEFINE3(osf_statfs, const char __user *, pathname,
-		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
-{
-	struct kstatfs linux_stat;
-	int error = user_statfs(pathname, &linux_stat);
-	if (!error)
-		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
-	return error;	
-}
-
-SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
-		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
-{
-	struct kstatfs linux_stat;
-	int error = fd_statfs(fd, &linux_stat);
-	if (!error)
-		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
-	return error;
-}
-
-/*
- * Uhh.. OSF/1 mount parameters aren't exactly obvious..
- *
- * Although to be frank, neither are the native Linux/i386 ones..
- */
-struct ufs_args {
-	char __user *devname;
-	int flags;
-	uid_t exroot;
-};
-
-struct cdfs_args {
-	char __user *devname;
-	int flags;
-	uid_t exroot;
-
-	/* This has lots more here, which Linux handles with the option block
-	   but I'm too lazy to do the translation into ASCII.  */
-};
-
-struct procfs_args {
-	char __user *devname;
-	int flags;
-	uid_t exroot;
-};
-
-/*
- * We can't actually handle ufs yet, so we translate UFS mounts to
- * ext2fs mounts. I wouldn't mind a UFS filesystem, but the UFS
- * layout is so braindead it's a major headache doing it.
- *
- * Just how long ago was it written? OTOH our UFS driver may be still
- * unhappy with OSF UFS. [CHECKME]
- */
-static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
-{
-	int retval;
-	struct cdfs_args tmp;
-	char *devname;
-
-	retval = -EFAULT;
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		goto out;
-	devname = getname(tmp.devname);
-	retval = PTR_ERR(devname);
-	if (IS_ERR(devname))
-		goto out;
-	retval = do_mount(devname, dirname, "ext2", flags, NULL);
-	putname(devname);
- out:
-	return retval;
-}
-
-static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
-{
-	int retval;
-	struct cdfs_args tmp;
-	char *devname;
-
-	retval = -EFAULT;
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		goto out;
-	devname = getname(tmp.devname);
-	retval = PTR_ERR(devname);
-	if (IS_ERR(devname))
-		goto out;
-	retval = do_mount(devname, dirname, "iso9660", flags, NULL);
-	putname(devname);
- out:
-	return retval;
-}
-
-static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
-{
-	struct procfs_args tmp;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	return do_mount("", dirname, "proc", flags, NULL);
-}
-
-SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
-		int, flag, void __user *, data)
-{
-	int retval;
-	char *name;
-
-	name = getname(path);
-	retval = PTR_ERR(name);
-	if (IS_ERR(name))
-		goto out;
-	switch (typenr) {
-	case 1:
-		retval = osf_ufs_mount(name, data, flag);
-		break;
-	case 6:
-		retval = osf_cdfs_mount(name, data, flag);
-		break;
-	case 9:
-		retval = osf_procfs_mount(name, data, flag);
-		break;
-	default:
-		retval = -EINVAL;
-		printk("osf_mount(%ld, %x)\n", typenr, flag);
-	}
-	putname(name);
- out:
-	return retval;
-}
-
-SYSCALL_DEFINE1(osf_utsname, char __user *, name)
-{
-	int error;
-
-	down_read(&uts_sem);
-	error = -EFAULT;
-	if (copy_to_user(name + 0, utsname()->sysname, 32))
-		goto out;
-	if (copy_to_user(name + 32, utsname()->nodename, 32))
-		goto out;
-	if (copy_to_user(name + 64, utsname()->release, 32))
-		goto out;
-	if (copy_to_user(name + 96, utsname()->version, 32))
-		goto out;
-	if (copy_to_user(name + 128, utsname()->machine, 32))
-		goto out;
-
-	error = 0;
- out:
-	up_read(&uts_sem);	
-	return error;
-}
-
-SYSCALL_DEFINE0(getpagesize)
-{
-	return PAGE_SIZE;
-}
-
-SYSCALL_DEFINE0(getdtablesize)
-{
-	return sysctl_nr_open;
-}
-
-/*
- * For compatibility with OSF/1 only.  Use utsname(2) instead.
- */
-SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
-{
-	unsigned len;
-	int i;
-
-	if (!access_ok(VERIFY_WRITE, name, namelen))
-		return -EFAULT;
-
-	len = namelen;
-	if (len > 32)
-		len = 32;
-
-	down_read(&uts_sem);
-	for (i = 0; i < len; ++i) {
-		__put_user(utsname()->domainname[i], name + i);
-		if (utsname()->domainname[i] == '\0')
-			break;
-	}
-	up_read(&uts_sem);
-
-	return 0;
-}
-
-/*
- * The following stuff should move into a header file should it ever
- * be labeled "officially supported."  Right now, there is just enough
- * support to avoid applications (such as tar) printing error
- * messages.  The attributes are not really implemented.
- */
-
-/*
- * Values for Property list entry flag
- */
-#define PLE_PROPAGATE_ON_COPY		0x1	/* cp(1) will copy entry
-						   by default */
-#define PLE_FLAG_MASK			0x1	/* Valid flag values */
-#define PLE_FLAG_ALL			-1	/* All flag value */
-
-struct proplistname_args {
-	unsigned int pl_mask;
-	unsigned int pl_numnames;
-	char **pl_names;
-};
-
-union pl_args {
-	struct setargs {
-		char __user *path;
-		long follow;
-		long nbytes;
-		char __user *buf;
-	} set;
-	struct fsetargs {
-		long fd;
-		long nbytes;
-		char __user *buf;
-	} fset;
-	struct getargs {
-		char __user *path;
-		long follow;
-		struct proplistname_args __user *name_args;
-		long nbytes;
-		char __user *buf;
-		int __user *min_buf_size;
-	} get;
-	struct fgetargs {
-		long fd;
-		struct proplistname_args __user *name_args;
-		long nbytes;
-		char __user *buf;
-		int __user *min_buf_size;
-	} fget;
-	struct delargs {
-		char __user *path;
-		long follow;
-		struct proplistname_args __user *name_args;
-	} del;
-	struct fdelargs {
-		long fd;
-		struct proplistname_args __user *name_args;
-	} fdel;
-};
-
-enum pl_code {
-	PL_SET = 1, PL_FSET = 2,
-	PL_GET = 3, PL_FGET = 4,
-	PL_DEL = 5, PL_FDEL = 6
-};
-
-SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
-		union pl_args __user *, args)
-{
-	long error;
-	int __user *min_buf_size_ptr;
-
-	switch (code) {
-	case PL_SET:
-		if (get_user(error, &args->set.nbytes))
-			error = -EFAULT;
-		break;
-	case PL_FSET:
-		if (get_user(error, &args->fset.nbytes))
-			error = -EFAULT;
-		break;
-	case PL_GET:
-		error = get_user(min_buf_size_ptr, &args->get.min_buf_size);
-		if (error)
-			break;
-		error = put_user(0, min_buf_size_ptr);
-		break;
-	case PL_FGET:
-		error = get_user(min_buf_size_ptr, &args->fget.min_buf_size);
-		if (error)
-			break;
-		error = put_user(0, min_buf_size_ptr);
-		break;
-	case PL_DEL:
-	case PL_FDEL:
-		error = 0;
-		break;
-	default:
-		error = -EOPNOTSUPP;
-		break;
-	};
-	return error;
-}
-
-SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
-		struct sigstack __user *, uoss)
-{
-	unsigned long usp = rdusp();
-	unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size;
-	unsigned long oss_os = on_sig_stack(usp);
-	int error;
-
-	if (uss) {
-		void __user *ss_sp;
-
-		error = -EFAULT;
-		if (get_user(ss_sp, &uss->ss_sp))
-			goto out;
-
-		/* If the current stack was set with sigaltstack, don't
-		   swap stacks while we are on it.  */
-		error = -EPERM;
-		if (current->sas_ss_sp && on_sig_stack(usp))
-			goto out;
-
-		/* Since we don't know the extent of the stack, and we don't
-		   track onstack-ness, but rather calculate it, we must 
-		   presume a size.  Ho hum this interface is lossy.  */
-		current->sas_ss_sp = (unsigned long)ss_sp - SIGSTKSZ;
-		current->sas_ss_size = SIGSTKSZ;
-	}
-
-	if (uoss) {
-		error = -EFAULT;
-		if (! access_ok(VERIFY_WRITE, uoss, sizeof(*uoss))
-		    || __put_user(oss_sp, &uoss->ss_sp)
-		    || __put_user(oss_os, &uoss->ss_onstack))
-			goto out;
-	}
-
-	error = 0;
- out:
-	return error;
-}
-
-SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
-{
-	const char *sysinfo_table[] = {
-		utsname()->sysname,
-		utsname()->nodename,
-		utsname()->release,
-		utsname()->version,
-		utsname()->machine,
-		"alpha",	/* instruction set architecture */
-		"dummy",	/* hardware serial number */
-		"dummy",	/* hardware manufacturer */
-		"dummy",	/* secure RPC domain */
-	};
-	unsigned long offset;
-	const char *res;
-	long len, err = -EINVAL;
-
-	offset = command-1;
-	if (offset >= ARRAY_SIZE(sysinfo_table)) {
-		/* Digital UNIX has a few unpublished interfaces here */
-		printk("sysinfo(%d)", command);
-		goto out;
-	}
-
-	down_read(&uts_sem);
-	res = sysinfo_table[offset];
-	len = strlen(res)+1;
-	if ((unsigned long)len > (unsigned long)count)
-		len = count;
-	if (copy_to_user(buf, res, len))
-		err = -EFAULT;
-	else
-		err = 0;
-	up_read(&uts_sem);
- out:
-	return err;
-}
-
-SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
-		unsigned long, nbytes, int __user *, start, void __user *, arg)
-{
-	unsigned long w;
-	struct percpu_struct *cpu;
-
-	switch (op) {
-	case GSI_IEEE_FP_CONTROL:
-		/* Return current software fp control & status bits.  */
-		/* Note that DU doesn't verify available space here.  */
-
- 		w = current_thread_info()->ieee_state & IEEE_SW_MASK;
- 		w = swcr_update_status(w, rdfpcr());
-		if (put_user(w, (unsigned long __user *) buffer))
-			return -EFAULT;
-		return 0;
-
-	case GSI_IEEE_STATE_AT_SIGNAL:
-		/*
-		 * Not sure anybody will ever use this weird stuff.  These
-		 * ops can be used (under OSF/1) to set the fpcr that should
-		 * be used when a signal handler starts executing.
-		 */
-		break;
-
- 	case GSI_UACPROC:
-		if (nbytes < sizeof(unsigned int))
-			return -EINVAL;
-		w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
-			UAC_BITMASK;
-		if (put_user(w, (unsigned int __user *)buffer))
-			return -EFAULT;
- 		return 1;
-
-	case GSI_PROC_TYPE:
-		if (nbytes < sizeof(unsigned long))
-			return -EINVAL;
-		cpu = (struct percpu_struct*)
-		  ((char*)hwrpb + hwrpb->processor_offset);
-		w = cpu->type;
-		if (put_user(w, (unsigned long  __user*)buffer))
-			return -EFAULT;
-		return 1;
-
-	case GSI_GET_HWRPB:
-		if (nbytes > sizeof(*hwrpb))
-			return -EINVAL;
-		if (copy_to_user(buffer, hwrpb, nbytes) != 0)
-			return -EFAULT;
-		return 1;
-
-	default:
-		break;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
-		unsigned long, nbytes, int __user *, start, void __user *, arg)
-{
-	switch (op) {
-	case SSI_IEEE_FP_CONTROL: {
-		unsigned long swcr, fpcr;
-		unsigned int *state;
-
-		/* 
-		 * Alpha Architecture Handbook 4.7.7.3:
-		 * To be fully IEEE compiant, we must track the current IEEE
-		 * exception state in software, because spurious bits can be
-		 * set in the trap shadow of a software-complete insn.
-		 */
-
-		if (get_user(swcr, (unsigned long __user *)buffer))
-			return -EFAULT;
-		state = &current_thread_info()->ieee_state;
-
-		/* Update softare trap enable bits.  */
-		*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
-
-		/* Update the real fpcr.  */
-		fpcr = rdfpcr() & FPCR_DYN_MASK;
-		fpcr |= ieee_swcr_to_fpcr(swcr);
-		wrfpcr(fpcr);
-
-		return 0;
-	}
-
-	case SSI_IEEE_RAISE_EXCEPTION: {
-		unsigned long exc, swcr, fpcr, fex;
-		unsigned int *state;
-
-		if (get_user(exc, (unsigned long __user *)buffer))
-			return -EFAULT;
-		state = &current_thread_info()->ieee_state;
-		exc &= IEEE_STATUS_MASK;
-
-		/* Update softare trap enable bits.  */
- 		swcr = (*state & IEEE_SW_MASK) | exc;
-		*state |= exc;
-
-		/* Update the real fpcr.  */
-		fpcr = rdfpcr();
-		fpcr |= ieee_swcr_to_fpcr(swcr);
-		wrfpcr(fpcr);
-
- 		/* If any exceptions set by this call, and are unmasked,
-		   send a signal.  Old exceptions are not signaled.  */
-		fex = (exc >> IEEE_STATUS_TO_EXCSUM_SHIFT) & swcr;
- 		if (fex) {
-			siginfo_t info;
-			int si_code = 0;
-
-			if (fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND;
-			if (fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES;
-			if (fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND;
-			if (fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF;
-			if (fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
-			if (fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
-
-			info.si_signo = SIGFPE;
-			info.si_errno = 0;
-			info.si_code = si_code;
-			info.si_addr = NULL;  /* FIXME */
- 			send_sig_info(SIGFPE, &info, current);
- 		}
-		return 0;
-	}
-
-	case SSI_IEEE_STATE_AT_SIGNAL:
-	case SSI_IEEE_IGNORE_STATE_AT_SIGNAL:
-		/*
-		 * Not sure anybody will ever use this weird stuff.  These
-		 * ops can be used (under OSF/1) to set the fpcr that should
-		 * be used when a signal handler starts executing.
-		 */
-		break;
-
- 	case SSI_NVPAIRS: {
-		unsigned long v, w, i;
-		unsigned int old, new;
-		
- 		for (i = 0; i < nbytes; ++i) {
-
- 			if (get_user(v, 2*i + (unsigned int __user *)buffer))
- 				return -EFAULT;
- 			if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer))
- 				return -EFAULT;
- 			switch (v) {
- 			case SSIN_UACPROC:
-			again:
-				old = current_thread_info()->flags;
-				new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
-				new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
-				if (cmpxchg(&current_thread_info()->flags,
-					    old, new) != old)
-					goto again;
- 				break;
- 
- 			default:
- 				return -EOPNOTSUPP;
- 			}
- 		}
- 		return 0;
-	}
- 
-	default:
-		break;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-/* Translations due to the fact that OSF's time_t is an int.  Which
-   affects all sorts of things, like timeval and itimerval.  */
-
-extern struct timezone sys_tz;
-
-struct timeval32
-{
-    int tv_sec, tv_usec;
-};
-
-struct itimerval32
-{
-    struct timeval32 it_interval;
-    struct timeval32 it_value;
-};
-
-static inline long
-get_tv32(struct timeval *o, struct timeval32 __user *i)
-{
-	return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
-		(__get_user(o->tv_sec, &i->tv_sec) |
-		 __get_user(o->tv_usec, &i->tv_usec)));
-}
-
-static inline long
-put_tv32(struct timeval32 __user *o, struct timeval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->tv_sec, &o->tv_sec) |
-		 __put_user(i->tv_usec, &o->tv_usec)));
-}
-
-static inline long
-get_it32(struct itimerval *o, struct itimerval32 __user *i)
-{
-	return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
-		(__get_user(o->it_interval.tv_sec, &i->it_interval.tv_sec) |
-		 __get_user(o->it_interval.tv_usec, &i->it_interval.tv_usec) |
-		 __get_user(o->it_value.tv_sec, &i->it_value.tv_sec) |
-		 __get_user(o->it_value.tv_usec, &i->it_value.tv_usec)));
-}
-
-static inline long
-put_it32(struct itimerval32 __user *o, struct itimerval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->it_interval.tv_sec, &o->it_interval.tv_sec) |
-		 __put_user(i->it_interval.tv_usec, &o->it_interval.tv_usec) |
-		 __put_user(i->it_value.tv_sec, &o->it_value.tv_sec) |
-		 __put_user(i->it_value.tv_usec, &o->it_value.tv_usec)));
-}
-
-static inline void
-jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value)
-{
-	value->tv_usec = (jiffies % HZ) * (1000000L / HZ);
-	value->tv_sec = jiffies / HZ;
-}
-
-SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv,
-		struct timezone __user *, tz)
-{
-	if (tv) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
-		struct timezone __user *, tz)
-{
-	struct timespec kts;
-	struct timezone ktz;
-
- 	if (tv) {
-		if (get_tv32((struct timeval *)&kts, tv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(*tz)))
-			return -EFAULT;
-	}
-
-	kts.tv_nsec *= 1000;
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
-SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it)
-{
-	struct itimerval kit;
-	int error;
-
-	error = do_getitimer(which, &kit);
-	if (!error && put_it32(it, &kit))
-		error = -EFAULT;
-
-	return error;
-}
-
-SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in,
-		struct itimerval32 __user *, out)
-{
-	struct itimerval kin, kout;
-	int error;
-
-	if (in) {
-		if (get_it32(&kin, in))
-			return -EFAULT;
-	} else
-		memset(&kin, 0, sizeof(kin));
-
-	error = do_setitimer(which, &kin, out ? &kout : NULL);
-	if (error || !out)
-		return error;
-
-	if (put_it32(out, &kout))
-		return -EFAULT;
-
-	return 0;
-
-}
-
-SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
-		struct timeval32 __user *, tvs)
-{
-	struct timespec tv[2];
-
-	if (tvs) {
-		struct timeval ktvs[2];
-		if (get_tv32(&ktvs[0], &tvs[0]) ||
-		    get_tv32(&ktvs[1], &tvs[1]))
-			return -EFAULT;
-
-		if (ktvs[0].tv_usec < 0 || ktvs[0].tv_usec >= 1000000 ||
-		    ktvs[1].tv_usec < 0 || ktvs[1].tv_usec >= 1000000)
-			return -EINVAL;
-
-		tv[0].tv_sec = ktvs[0].tv_sec;
-		tv[0].tv_nsec = 1000 * ktvs[0].tv_usec;
-		tv[1].tv_sec = ktvs[1].tv_sec;
-		tv[1].tv_nsec = 1000 * ktvs[1].tv_usec;
-	}
-
-	return do_utimes(AT_FDCWD, filename, tvs ? tv : NULL, 0);
-}
-
-SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp,
-		fd_set __user *, exp, struct timeval32 __user *, tvp)
-{
-	struct timespec end_time, *to = NULL;
-	if (tvp) {
-		time_t sec, usec;
-
-		to = &end_time;
-
-		if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
-		    || __get_user(sec, &tvp->tv_sec)
-		    || __get_user(usec, &tvp->tv_usec)) {
-		    	return -EFAULT;
-		}
-
-		if (sec < 0 || usec < 0)
-			return -EINVAL;
-
-		if (poll_select_set_timeout(to, sec, usec * NSEC_PER_USEC))
-			return -EINVAL;		
-
-	}
-
-	/* OSF does not copy back the remaining time.  */
-	return core_sys_select(n, inp, outp, exp, to);
-}
-
-struct rusage32 {
-	struct timeval32 ru_utime;	/* user time used */
-	struct timeval32 ru_stime;	/* system time used */
-	long	ru_maxrss;		/* maximum resident set size */
-	long	ru_ixrss;		/* integral shared memory size */
-	long	ru_idrss;		/* integral unshared data size */
-	long	ru_isrss;		/* integral unshared stack size */
-	long	ru_minflt;		/* page reclaims */
-	long	ru_majflt;		/* page faults */
-	long	ru_nswap;		/* swaps */
-	long	ru_inblock;		/* block input operations */
-	long	ru_oublock;		/* block output operations */
-	long	ru_msgsnd;		/* messages sent */
-	long	ru_msgrcv;		/* messages received */
-	long	ru_nsignals;		/* signals received */
-	long	ru_nvcsw;		/* voluntary context switches */
-	long	ru_nivcsw;		/* involuntary " */
-};
-
-SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
-{
-	struct rusage32 r;
-
-	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
-		return -EINVAL;
-
-	memset(&r, 0, sizeof(r));
-	switch (who) {
-	case RUSAGE_SELF:
-		jiffies_to_timeval32(current->utime, &r.ru_utime);
-		jiffies_to_timeval32(current->stime, &r.ru_stime);
-		r.ru_minflt = current->min_flt;
-		r.ru_majflt = current->maj_flt;
-		break;
-	case RUSAGE_CHILDREN:
-		jiffies_to_timeval32(current->signal->cutime, &r.ru_utime);
-		jiffies_to_timeval32(current->signal->cstime, &r.ru_stime);
-		r.ru_minflt = current->signal->cmin_flt;
-		r.ru_majflt = current->signal->cmaj_flt;
-		break;
-	}
-
-	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
-}
-
-SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
-		struct rusage32 __user *, ur)
-{
-	struct rusage r;
-	long ret, err;
-	unsigned int status = 0;
-	mm_segment_t old_fs;
-
-	if (!ur)
-		return sys_wait4(pid, ustatus, options, NULL);
-
-	old_fs = get_fs();
-		
-	set_fs (KERNEL_DS);
-	ret = sys_wait4(pid, (unsigned int __user *) &status, options,
-			(struct rusage __user *) &r);
-	set_fs (old_fs);
-
-	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
-		return -EFAULT;
-
-	err = 0;
-	err |= put_user(status, ustatus);
-	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
-	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
-	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
-	err |= __put_user(r.ru_stime.tv_usec, &ur->ru_stime.tv_usec);
-	err |= __put_user(r.ru_maxrss, &ur->ru_maxrss);
-	err |= __put_user(r.ru_ixrss, &ur->ru_ixrss);
-	err |= __put_user(r.ru_idrss, &ur->ru_idrss);
-	err |= __put_user(r.ru_isrss, &ur->ru_isrss);
-	err |= __put_user(r.ru_minflt, &ur->ru_minflt);
-	err |= __put_user(r.ru_majflt, &ur->ru_majflt);
-	err |= __put_user(r.ru_nswap, &ur->ru_nswap);
-	err |= __put_user(r.ru_inblock, &ur->ru_inblock);
-	err |= __put_user(r.ru_oublock, &ur->ru_oublock);
-	err |= __put_user(r.ru_msgsnd, &ur->ru_msgsnd);
-	err |= __put_user(r.ru_msgrcv, &ur->ru_msgrcv);
-	err |= __put_user(r.ru_nsignals, &ur->ru_nsignals);
-	err |= __put_user(r.ru_nvcsw, &ur->ru_nvcsw);
-	err |= __put_user(r.ru_nivcsw, &ur->ru_nivcsw);
-
-	return err ? err : ret;
-}
-
-/*
- * I don't know what the parameters are: the first one
- * seems to be a timeval pointer, and I suspect the second
- * one is the time remaining.. Ho humm.. No documentation.
- */
-SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep,
-		struct timeval32 __user *, remain)
-{
-	struct timeval tmp;
-	unsigned long ticks;
-
-	if (get_tv32(&tmp, sleep))
-		goto fault;
-
-	ticks = timeval_to_jiffies(&tmp);
-
-	ticks = schedule_timeout_interruptible(ticks);
-
-	if (remain) {
-		jiffies_to_timeval(ticks, &tmp);
-		if (put_tv32(remain, &tmp))
-			goto fault;
-	}
-	
-	return 0;
- fault:
-	return -EFAULT;
-}
-
-
-struct timex32 {
-	unsigned int modes;	/* mode selector */
-	long offset;		/* time offset (usec) */
-	long freq;		/* frequency offset (scaled ppm) */
-	long maxerror;		/* maximum error (usec) */
-	long esterror;		/* estimated error (usec) */
-	int status;		/* clock command/status */
-	long constant;		/* pll time constant */
-	long precision;		/* clock precision (usec) (read only) */
-	long tolerance;		/* clock frequency tolerance (ppm)
-				 * (read only)
-				 */
-	struct timeval32 time;	/* (read only) */
-	long tick;		/* (modified) usecs between clock ticks */
-
-	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
-	long jitter;            /* pps jitter (us) (ro) */
-	int shift;              /* interval duration (s) (shift) (ro) */
-	long stabil;            /* pps stability (scaled ppm) (ro) */
-	long jitcnt;            /* jitter limit exceeded (ro) */
-	long calcnt;            /* calibration intervals (ro) */
-	long errcnt;            /* calibration errors (ro) */
-	long stbcnt;            /* stability limit exceeded (ro) */
-
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-};
-
-SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
-{
-        struct timex txc;
-	int ret;
-
-	/* copy relevant bits of struct timex. */
-	if (copy_from_user(&txc, txc_p, offsetof(struct timex32, time)) ||
-	    copy_from_user(&txc.tick, &txc_p->tick, sizeof(struct timex32) - 
-			   offsetof(struct timex32, time)))
-	  return -EFAULT;
-
-	ret = do_adjtimex(&txc);	
-	if (ret < 0)
-	  return ret;
-	
-	/* copy back to timex32 */
-	if (copy_to_user(txc_p, &txc, offsetof(struct timex32, time)) ||
-	    (copy_to_user(&txc_p->tick, &txc.tick, sizeof(struct timex32) - 
-			  offsetof(struct timex32, tick))) ||
-	    (put_tv32(&txc_p->time, &txc.time)))
-	  return -EFAULT;
-
-	return ret;
-}
-
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
-
-static unsigned long
-arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
-		         unsigned long limit)
-{
-	struct vm_area_struct *vma = find_vma(current->mm, addr);
-
-	while (1) {
-		/* At this point:  (!vma || addr < vma->vm_end). */
-		if (limit - len < addr)
-			return -ENOMEM;
-		if (!vma || addr + len <= vma->vm_start)
-			return addr;
-		addr = vma->vm_end;
-		vma = vma->vm_next;
-	}
-}
-
-unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		       unsigned long len, unsigned long pgoff,
-		       unsigned long flags)
-{
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
-
-	if (len > limit)
-		return -ENOMEM;
-
-	if (flags & MAP_FIXED)
-		return addr;
-
-	/* First, see if the given suggestion fits.
-
-	   The OSF/1 loader (/sbin/loader) relies on us returning an
-	   address larger than the requested if one exists, which is
-	   a terribly broken way to program.
-
-	   That said, I can see the use in being able to suggest not
-	   merely specific addresses, but regions of memory -- perhaps
-	   this feature should be incorporated into all ports?  */
-
-	if (addr) {
-		addr = arch_get_unmapped_area_1 (PAGE_ALIGN(addr), len, limit);
-		if (addr != (unsigned long) -ENOMEM)
-			return addr;
-	}
-
-	/* Next, try allocating at TASK_UNMAPPED_BASE.  */
-	addr = arch_get_unmapped_area_1 (PAGE_ALIGN(TASK_UNMAPPED_BASE),
-					 len, limit);
-	if (addr != (unsigned long) -ENOMEM)
-		return addr;
-
-	/* Finally, try allocating in low memory.  */
-	addr = arch_get_unmapped_area_1 (PAGE_SIZE, len, limit);
-
-	return addr;
-}
-
-#ifdef CONFIG_OSF4_COMPAT
-
-/* Clear top 32 bits of iov_len in the user's buffer for
-   compatibility with old versions of OSF/1 where iov_len
-   was defined as int. */
-static int
-osf_fix_iov_len(const struct iovec __user *iov, unsigned long count)
-{
-	unsigned long i;
-
-	for (i = 0 ; i < count ; i++) {
-		int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1;
-
-		if (put_user(0, iov_len_high))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-	return sys_readv(fd, vector, count);
-}
-
-SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-	return sys_writev(fd, vector, count);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pc873xx.c b/ANDROID_3.4.5/arch/alpha/kernel/pc873xx.c
deleted file mode 100644
index 27dcbff8..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pc873xx.c
+++ /dev/null
@@ -1,88 +0,0 @@
-#include <linux/ioport.h>
-#include <asm/io.h>
-
-#include "pc873xx.h"
-
-static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
-
-static char *pc873xx_names[] = {
-	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
-};
-
-static unsigned int base, model;
-
-
-unsigned int __init pc873xx_get_base()
-{
-	return base;
-}
-
-char *__init pc873xx_get_model()
-{
-	return pc873xx_names[model];
-}
-
-static unsigned char __init pc873xx_read(unsigned int base, int reg)
-{
-	outb(reg, base);
-	return inb(base + 1);
-}
-
-static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(reg, base);
-	outb(data, base + 1);
-	outb(data, base + 1);		/* Must be written twice */
-	local_irq_restore(flags);
-}
-
-int __init pc873xx_probe(void)
-{
-	int val, index = 0;
-
-	while ((base = pc873xx_probelist[index++])) {
-
-		if (request_region(base, 2, "Super IO PC873xx") == NULL)
-			continue;
-
-		val = pc873xx_read(base, REG_SID);
-		if ((val & 0xf0) == 0x10) {
-			model = PC87332;
-			break;
-		} else if ((val & 0xf8) == 0x70) {
-			model = PC87306;
-			break;
-		} else if ((val & 0xf8) == 0x50) {
-			model = PC87334;
-			break;
-		} else if ((val & 0xf8) == 0x40) {
-			model = PC87303;
-			break;
-		}
-
-		release_region(base, 2);
-	}
-
-	return (base == 0) ? -1 : 1;
-}
-
-void __init pc873xx_enable_epp19(void)
-{
-	unsigned char data;
-
-	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
-	data = pc873xx_read(base, REG_PCR);
-	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
-}
-
-void __init pc873xx_enable_ide(void)
-{
-	unsigned char data;
-
-	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
-	data = pc873xx_read(base, REG_FER);
-	pc873xx_write(base, REG_FER, data | 0x40);
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pc873xx.h b/ANDROID_3.4.5/arch/alpha/kernel/pc873xx.h
deleted file mode 100644
index 25e16956..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pc873xx.h
+++ /dev/null
@@ -1,35 +0,0 @@
-
-#ifndef _PC873xx_H_
-#define _PC873xx_H_
-
-/*
- * Control Register Values
- */
-#define REG_FER	0x00
-#define REG_FAR	0x01
-#define REG_PTR	0x02
-#define REG_FCR	0x03
-#define REG_PCR	0x04
-#define REG_KRR	0x05
-#define REG_PMC	0x06
-#define REG_TUP	0x07
-#define REG_SID	0x08
-#define REG_ASC	0x09
-#define REG_IRC	0x0e
-
-/*
- * Model numbers
- */
-#define PC87303	0
-#define PC87306	1
-#define PC87312	2
-#define PC87332	3
-#define PC87334	4
-
-int pc873xx_probe(void);
-unsigned int pc873xx_get_base(void);
-char *pc873xx_get_model(void);
-void pc873xx_enable_epp19(void);
-void pc873xx_enable_ide(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pci-noop.c b/ANDROID_3.4.5/arch/alpha/kernel/pci-noop.c
deleted file mode 100644
index df24b76f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pci-noop.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/pci-noop.c
- *
- * Stub PCI interfaces for Jensen-specific kernels.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-#include <linux/capability.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-
-#include "proto.h"
-
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = alloc_bootmem(sizeof(*hose));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
-	struct resource *res;
-
-	res = alloc_bootmem(sizeof(*res));
-
-	return res;
-}
-
-asmlinkage long
-sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
-{
-	struct pci_controller *hose;
-
-	/* from hose or from bus.devfn */
-	if (which & IOBASE_FROM_HOSE) {
-		for (hose = hose_head; hose; hose = hose->next) 
-			if (hose->index == bus)
-				break;
-		if (!hose)
-			return -ENODEV;
-	} else {
-		/* Special hook for ISA access.  */
-		if (bus == 0 && dfn == 0)
-			hose = pci_isa_hose;
-		else
-			return -ENODEV;
-	}
-
-	switch (which & ~IOBASE_FROM_HOSE) {
-	case IOBASE_HOSE:
-		return hose->index;
-	case IOBASE_SPARSE_MEM:
-		return hose->sparse_mem_base;
-	case IOBASE_DENSE_MEM:
-		return hose->dense_mem_base;
-	case IOBASE_SPARSE_IO:
-		return hose->sparse_io_base;
-	case IOBASE_DENSE_IO:
-		return hose->dense_io_base;
-	case IOBASE_ROOT_BUS:
-		return hose->bus->number;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-asmlinkage long
-sys_pciconfig_read(unsigned long bus, unsigned long dfn,
-		   unsigned long off, unsigned long len, void *buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
-
-asmlinkage long
-sys_pciconfig_write(unsigned long bus, unsigned long dfn,
-		    unsigned long off, unsigned long len, void *buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
-
-static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t gfp,
-				       struct dma_attrs *attrs)
-{
-	void *ret;
-
-	if (!dev || *dev->dma_mask >= 0xffffffffUL)
-		gfp &= ~GFP_DMA;
-	ret = (void *)__get_free_pages(gfp, get_order(size));
-	if (ret) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_phys(ret);
-	}
-	return ret;
-}
-
-static void alpha_noop_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_addr,
-				     struct dma_attrs *attrs)
-{
-	free_pages((unsigned long)cpu_addr, get_order(size));
-}
-
-static dma_addr_t alpha_noop_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir,
-				      struct dma_attrs *attrs)
-{
-	return page_to_pa(page) + offset;
-}
-
-static int alpha_noop_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-			     enum dma_data_direction dir, struct dma_attrs *attrs)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sgl, sg, nents, i) {
-		void *va;
-
-		BUG_ON(!sg_page(sg));
-		va = sg_virt(sg);
-		sg_dma_address(sg) = (dma_addr_t)virt_to_phys(va);
-		sg_dma_len(sg) = sg->length;
-	}
-
-	return nents;
-}
-
-static int alpha_noop_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static int alpha_noop_supported(struct device *dev, u64 mask)
-{
-	return mask < 0x00ffffffUL ? 0 : 1;
-}
-
-static int alpha_noop_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-	return 0;
-}
-
-struct dma_map_ops alpha_noop_ops = {
-	.alloc			= alpha_noop_alloc_coherent,
-	.free			= alpha_noop_free_coherent,
-	.map_page		= alpha_noop_map_page,
-	.map_sg			= alpha_noop_map_sg,
-	.mapping_error		= alpha_noop_mapping_error,
-	.dma_supported		= alpha_noop_supported,
-	.set_dma_mask		= alpha_noop_set_mask,
-};
-
-struct dma_map_ops *dma_ops = &alpha_noop_ops;
-EXPORT_SYMBOL(dma_ops);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pci-sysfs.c b/ANDROID_3.4.5/arch/alpha/kernel/pci-sysfs.c
deleted file mode 100644
index 53649c7d..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pci-sysfs.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * arch/alpha/kernel/pci-sysfs.c
- *
- * Copyright (C) 2009 Ivan Kokshaysky
- *
- * Alpha PCI resource files.
- *
- * Loosely based on generic HAVE_PCI_MMAP implementation in
- * drivers/pci/pci-sysfs.c
- */
-
-#include <linux/sched.h>
-#include <linux/stat.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-
-static int hose_mmap_page_range(struct pci_controller *hose,
-				struct vm_area_struct *vma,
-				enum pci_mmap_state mmap_type, int sparse)
-{
-	unsigned long base;
-
-	if (mmap_type == pci_mmap_mem)
-		base = sparse ? hose->sparse_mem_base : hose->dense_mem_base;
-	else
-		base = sparse ? hose->sparse_io_base : hose->dense_io_base;
-
-	vma->vm_pgoff += base >> PAGE_SHIFT;
-	vma->vm_flags |= (VM_IO | VM_RESERVED);
-
-	return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-				  vma->vm_end - vma->vm_start,
-				  vma->vm_page_prot);
-}
-
-static int __pci_mmap_fits(struct pci_dev *pdev, int num,
-			   struct vm_area_struct *vma, int sparse)
-{
-	unsigned long nr, start, size;
-	int shift = sparse ? 5 : 0;
-
-	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-	start = vma->vm_pgoff;
-	size = ((pci_resource_len(pdev, num) - 1) >> (PAGE_SHIFT - shift)) + 1;
-
-	if (start < size && size - start >= nr)
-		return 1;
-	WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on %s BAR %d "
-		"(size 0x%08lx)\n",
-		current->comm, sparse ? " sparse" : "", start, start + nr,
-		pci_name(pdev), num, size);
-	return 0;
-}
-
-/**
- * pci_mmap_resource - map a PCI resource into user memory space
- * @kobj: kobject for mapping
- * @attr: struct bin_attribute for the file being mapped
- * @vma: struct vm_area_struct passed into the mmap
- * @sparse: address space type
- *
- * Use the bus mapping routines to map a PCI resource into userspace.
- */
-static int pci_mmap_resource(struct kobject *kobj,
-			     struct bin_attribute *attr,
-			     struct vm_area_struct *vma, int sparse)
-{
-	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
-						       struct device, kobj));
-	struct resource *res = attr->private;
-	enum pci_mmap_state mmap_type;
-	struct pci_bus_region bar;
-	int i;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++)
-		if (res == &pdev->resource[i])
-			break;
-	if (i >= PCI_ROM_RESOURCE)
-		return -ENODEV;
-
-	if (!__pci_mmap_fits(pdev, i, vma, sparse))
-		return -EINVAL;
-
-	if (iomem_is_exclusive(res->start))
-		return -EINVAL;
-
-	pcibios_resource_to_bus(pdev, &bar, res);
-	vma->vm_pgoff += bar.start >> (PAGE_SHIFT - (sparse ? 5 : 0));
-	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
-
-	return hose_mmap_page_range(pdev->sysdata, vma, mmap_type, sparse);
-}
-
-static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *attr,
-				    struct vm_area_struct *vma)
-{
-	return pci_mmap_resource(kobj, attr, vma, 1);
-}
-
-static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
-				   struct bin_attribute *attr,
-				   struct vm_area_struct *vma)
-{
-	return pci_mmap_resource(kobj, attr, vma, 0);
-}
-
-/**
- * pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
- *
- * If we created resource files for @dev, remove them from sysfs and
- * free their resources.
- */
-void pci_remove_resource_files(struct pci_dev *pdev)
-{
-	int i;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		struct bin_attribute *res_attr;
-
-		res_attr = pdev->res_attr[i];
-		if (res_attr) {
-			sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
-			kfree(res_attr);
-		}
-
-		res_attr = pdev->res_attr_wc[i];
-		if (res_attr) {
-			sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
-			kfree(res_attr);
-		}
-	}
-}
-
-static int sparse_mem_mmap_fits(struct pci_dev *pdev, int num)
-{
-	struct pci_bus_region bar;
-	struct pci_controller *hose = pdev->sysdata;
-	long dense_offset;
-	unsigned long sparse_size;
-
-	pcibios_resource_to_bus(pdev, &bar, &pdev->resource[num]);
-
-	/* All core logic chips have 4G sparse address space, except
-	   CIA which has 16G (see xxx_SPARSE_MEM and xxx_DENSE_MEM
-	   definitions in asm/core_xxx.h files). This corresponds
-	   to 128M or 512M of the bus space. */
-	dense_offset = (long)(hose->dense_mem_base - hose->sparse_mem_base);
-	sparse_size = dense_offset >= 0x400000000UL ? 0x20000000 : 0x8000000;
-
-	return bar.end < sparse_size;
-}
-
-static int pci_create_one_attr(struct pci_dev *pdev, int num, char *name,
-			       char *suffix, struct bin_attribute *res_attr,
-			       unsigned long sparse)
-{
-	size_t size = pci_resource_len(pdev, num);
-
-	sprintf(name, "resource%d%s", num, suffix);
-	res_attr->mmap = sparse ? pci_mmap_resource_sparse :
-				  pci_mmap_resource_dense;
-	res_attr->attr.name = name;
-	res_attr->attr.mode = S_IRUSR | S_IWUSR;
-	res_attr->size = sparse ? size << 5 : size;
-	res_attr->private = &pdev->resource[num];
-	return sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
-}
-
-static int pci_create_attr(struct pci_dev *pdev, int num)
-{
-	/* allocate attribute structure, piggyback attribute name */
-	int retval, nlen1, nlen2 = 0, res_count = 1;
-	unsigned long sparse_base, dense_base;
-	struct bin_attribute *attr;
-	struct pci_controller *hose = pdev->sysdata;
-	char *suffix, *attr_name;
-
-	suffix = "";	/* Assume bwx machine, normal resourceN files. */
-	nlen1 = 10;
-
-	if (pdev->resource[num].flags & IORESOURCE_MEM) {
-		sparse_base = hose->sparse_mem_base;
-		dense_base = hose->dense_mem_base;
-		if (sparse_base && !sparse_mem_mmap_fits(pdev, num)) {
-			sparse_base = 0;
-			suffix = "_dense";
-			nlen1 = 16;	/* resourceN_dense */
-		}
-	} else {
-		sparse_base = hose->sparse_io_base;
-		dense_base = hose->dense_io_base;
-	}
-
-	if (sparse_base) {
-		suffix = "_sparse";
-		nlen1 = 17;
-		if (dense_base) {
-			nlen2 = 16;	/* resourceN_dense */
-			res_count = 2;
-		}
-	}
-
-	attr = kzalloc(sizeof(*attr) * res_count + nlen1 + nlen2, GFP_ATOMIC);
-	if (!attr)
-		return -ENOMEM;
-
-	/* Create bwx, sparse or single dense file */
-	attr_name = (char *)(attr + res_count);
-	pdev->res_attr[num] = attr;
-	retval = pci_create_one_attr(pdev, num, attr_name, suffix, attr,
-				     sparse_base);
-	if (retval || res_count == 1)
-		return retval;
-
-	/* Create dense file */
-	attr_name += nlen1;
-	attr++;
-	pdev->res_attr_wc[num] = attr;
-	return pci_create_one_attr(pdev, num, attr_name, "_dense", attr, 0);
-}
-
-/**
- * pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
- *
- * Walk the resources in @dev creating files for each resource available.
- */
-int pci_create_resource_files(struct pci_dev *pdev)
-{
-	int i;
-	int retval;
-
-	/* Expose the PCI resources from this device as files */
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-
-		/* skip empty resources */
-		if (!pci_resource_len(pdev, i))
-			continue;
-
-		retval = pci_create_attr(pdev, i);
-		if (retval) {
-			pci_remove_resource_files(pdev);
-			return retval;
-		}
-	}
-	return 0;
-}
-
-/* Legacy I/O bus mapping stuff. */
-
-static int __legacy_mmap_fits(struct pci_controller *hose,
-			      struct vm_area_struct *vma,
-			      unsigned long res_size, int sparse)
-{
-	unsigned long nr, start, size;
-
-	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-	start = vma->vm_pgoff;
-	size = ((res_size - 1) >> PAGE_SHIFT) + 1;
-
-	if (start < size && size - start >= nr)
-		return 1;
-	WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on hose %d "
-		"(size 0x%08lx)\n",
-		current->comm, sparse ? " sparse" : "", start, start + nr,
-		hose->index, size);
-	return 0;
-}
-
-static inline int has_sparse(struct pci_controller *hose,
-			     enum pci_mmap_state mmap_type)
-{
-	unsigned long base;
-
-	base = (mmap_type == pci_mmap_mem) ? hose->sparse_mem_base :
-					     hose->sparse_io_base;
-
-	return base != 0;
-}
-
-int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_type)
-{
-	struct pci_controller *hose = bus->sysdata;
-	int sparse = has_sparse(hose, mmap_type);
-	unsigned long res_size;
-
-	res_size = (mmap_type == pci_mmap_mem) ? bus->legacy_mem->size :
-						 bus->legacy_io->size;
-	if (!__legacy_mmap_fits(hose, vma, res_size, sparse))
-		return -EINVAL;
-
-	return hose_mmap_page_range(hose, vma, mmap_type, sparse);
-}
-
-/**
- * pci_adjust_legacy_attr - adjustment of legacy file attributes
- * @b: bus to create files under
- * @mmap_type: I/O port or memory
- *
- * Adjust file name and size for sparse mappings.
- */
-void pci_adjust_legacy_attr(struct pci_bus *bus, enum pci_mmap_state mmap_type)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (!has_sparse(hose, mmap_type))
-		return;
-
-	if (mmap_type == pci_mmap_mem) {
-		bus->legacy_mem->attr.name = "legacy_mem_sparse";
-		bus->legacy_mem->size <<= 5;
-	} else {
-		bus->legacy_io->attr.name = "legacy_io_sparse";
-		bus->legacy_io->size <<= 5;
-	}
-	return;
-}
-
-/* Legacy I/O bus read/write functions */
-int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	port += hose->io_space->start;
-
-	switch(size) {
-	case 1:
-		*((u8 *)val) = inb(port);
-		return 1;
-	case 2:
-		if (port & 1)
-			return -EINVAL;
-		*((u16 *)val) = inw(port);
-		return 2;
-	case 4:
-		if (port & 3)
-			return -EINVAL;
-		*((u32 *)val) = inl(port);
-		return 4;
-	}
-	return -EINVAL;
-}
-
-int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	port += hose->io_space->start;
-
-	switch(size) {
-	case 1:
-		outb(port, val);
-		return 1;
-	case 2:
-		if (port & 1)
-			return -EINVAL;
-		outw(port, val);
-		return 2;
-	case 4:
-		if (port & 3)
-			return -EINVAL;
-		outl(port, val);
-		return 4;
-	}
-	return -EINVAL;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pci.c b/ANDROID_3.4.5/arch/alpha/kernel/pci.c
deleted file mode 100644
index 1a629636..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pci.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/pci.c
- *
- * Extruded from code written by
- *	Dave Rusling (david.rusling@reo.mts.dec.com)
- *	David Mosberger (davidm@cs.arizona.edu)
- */
-
-/* 2.3.x PCI/resources, 1999 Andrea Arcangeli <andrea@suse.de> */
-
-/*
- * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
- *	     PCI-PCI bridges cleanup
- */
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <linux/cache.h>
-#include <linux/slab.h>
-#include <asm/machvec.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * Some string constants used by the various core logics. 
- */
-
-const char *const pci_io_names[] = {
-  "PCI IO bus 0", "PCI IO bus 1", "PCI IO bus 2", "PCI IO bus 3",
-  "PCI IO bus 4", "PCI IO bus 5", "PCI IO bus 6", "PCI IO bus 7"
-};
-
-const char *const pci_mem_names[] = {
-  "PCI mem bus 0", "PCI mem bus 1", "PCI mem bus 2", "PCI mem bus 3",
-  "PCI mem bus 4", "PCI mem bus 5", "PCI mem bus 6", "PCI mem bus 7"
-};
-
-const char pci_hae0_name[] = "HAE0";
-
-/*
- * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
- * assignments.
- */
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-/*
- * Quirks.
- */
-
-static void __init
-quirk_isa_bridge(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_ISA << 8;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
-
-static void __init
-quirk_cypress(struct pci_dev *dev)
-{
-	/* The Notorious Cy82C693 chip.  */
-
-	/* The generic legacy mode IDE fixup in drivers/pci/probe.c
-	   doesn't work correctly with the Cypress IDE controller as
-	   it has non-standard register layout.  Fix that.  */
-	if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
-		dev->resource[2].start = dev->resource[3].start = 0;
-		dev->resource[2].end = dev->resource[3].end = 0;
-		dev->resource[2].flags = dev->resource[3].flags = 0;
-		if (PCI_FUNC(dev->devfn) == 2) {
-			dev->resource[0].start = 0x170;
-			dev->resource[0].end = 0x177;
-			dev->resource[1].start = 0x376;
-			dev->resource[1].end = 0x376;
-		}
-	}
-
-	/* The Cypress bridge responds on the PCI bus in the address range
-	   0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
-	   way to turn this off.  The bridge also supports several extended
-	   BIOS ranges (disabled after power-up), and some consoles do turn
-	   them on.  So if we use a large direct-map window, or a large SG
-	   window, we must avoid the entire 0xfff00000-0xffffffff region.  */
-	if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
-		if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
-			__direct_map_size = 0xfff00000UL - __direct_map_base;
-		else {
-			struct pci_controller *hose = dev->sysdata;
-			struct pci_iommu_arena *pci = hose->sg_pci;
-			if (pci && pci->dma_base + pci->size >= 0xfff00000UL)
-				pci->size = 0xfff00000UL - pci->dma_base;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
-
-/* Called for each device after PCI setup is done. */
-static void __init
-pcibios_fixup_final(struct pci_dev *dev)
-{
-	unsigned int class = dev->class >> 8;
-
-	if (class == PCI_CLASS_BRIDGE_ISA || class == PCI_CLASS_BRIDGE_EISA) {
-		dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
-		isa_bridge = dev;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
-
-/* Just declaring that the power-of-ten prefixes are actually the
-   power-of-two ones doesn't make it true :) */
-#define KB			1024
-#define MB			(1024*KB)
-#define GB			(1024*MB)
-
-resource_size_t
-pcibios_align_resource(void *data, const struct resource *res,
-		       resource_size_t size, resource_size_t align)
-{
-	struct pci_dev *dev = data;
-	struct pci_controller *hose = dev->sysdata;
-	unsigned long alignto;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		/* Make sure we start at our min on all hoses */
-		if (start - hose->io_space->start < PCIBIOS_MIN_IO)
-			start = PCIBIOS_MIN_IO + hose->io_space->start;
-
-		/*
-		 * Put everything into 0x00-0xff region modulo 0x400
-		 */
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	}
-	else if	(res->flags & IORESOURCE_MEM) {
-		/* Make sure we start at our min on all hoses */
-		if (start - hose->mem_space->start < PCIBIOS_MIN_MEM)
-			start = PCIBIOS_MIN_MEM + hose->mem_space->start;
-
-		/*
-		 * The following holds at least for the Low Cost
-		 * Alpha implementation of the PCI interface:
-		 *
-		 * In sparse memory address space, the first
-		 * octant (16MB) of every 128MB segment is
-		 * aliased to the very first 16 MB of the
-		 * address space (i.e., it aliases the ISA
-		 * memory address space).  Thus, we try to
-		 * avoid allocating PCI devices in that range.
-		 * Can be allocated in 2nd-7th octant only.
-		 * Devices that need more than 112MB of
-		 * address space must be accessed through
-		 * dense memory space only!
-		 */
-
-		/* Align to multiple of size of minimum base.  */
-		alignto = max_t(resource_size_t, 0x1000, align);
-		start = ALIGN(start, alignto);
-		if (hose->sparse_mem_base && size <= 7 * 16*MB) {
-			if (((start / (16*MB)) & 0x7) == 0) {
-				start &= ~(128*MB - 1);
-				start += 16*MB;
-				start  = ALIGN(start, alignto);
-			}
-			if (start/(128*MB) != (start + size - 1)/(128*MB)) {
-				start &= ~(128*MB - 1);
-				start += (128 + 16)*MB;
-				start  = ALIGN(start, alignto);
-			}
-		}
-	}
-
-	return start;
-}
-#undef KB
-#undef MB
-#undef GB
-
-static int __init
-pcibios_init(void)
-{
-	if (alpha_mv.init_pci)
-		alpha_mv.init_pci();
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-char * __devinit
-pcibios_setup(char *str)
-{
-	return str;
-}
-
-#ifdef ALPHA_RESTORE_SRM_SETUP
-static struct pdev_srm_saved_conf *srm_saved_configs;
-
-void __devinit
-pdev_save_srm_config(struct pci_dev *dev)
-{
-	struct pdev_srm_saved_conf *tmp;
-	static int printed = 0;
-
-	if (!alpha_using_srm || pci_has_flag(PCI_PROBE_ONLY))
-		return;
-
-	if (!printed) {
-		printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
-		printed = 1;
-	}
-
-	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
-	if (!tmp) {
-		printk(KERN_ERR "%s: kmalloc() failed!\n", __func__);
-		return;
-	}
-	tmp->next = srm_saved_configs;
-	tmp->dev = dev;
-
-	pci_save_state(dev);
-
-	srm_saved_configs = tmp;
-}
-
-void
-pci_restore_srm_config(void)
-{
-	struct pdev_srm_saved_conf *tmp;
-
-	/* No need to restore if probed only. */
-	if (pci_has_flag(PCI_PROBE_ONLY))
-		return;
-
-	/* Restore SRM config. */
-	for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
-		pci_restore_state(tmp->dev);
-	}
-}
-#endif
-
-void __devinit
-pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev = bus->self;
-
-	if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
- 		   (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- 		pci_read_bridge_bases(bus);
-	} 
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		pdev_save_srm_config(dev);
-	}
-}
-
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-int
-pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	return pci_enable_resources(dev, mask);
-}
-
-/*
- *  If we set up a device for bus mastering, we need to check the latency
- *  timer as certain firmware forgets to set it properly, as seen
- *  on SX164 and LX164 with SRM.
- */
-void
-pcibios_set_master(struct pci_dev *dev)
-{
-	u8 lat;
-	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-	if (lat >= 16) return;
-	printk("PCI: Setting latency timer of device %s to 64\n",
-							pci_name(dev));
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
-}
-
-void __init
-pcibios_claim_one_bus(struct pci_bus *b)
-{
-	struct pci_dev *dev;
-	struct pci_bus *child_bus;
-
-	list_for_each_entry(dev, &b->devices, bus_list) {
-		int i;
-
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
-			if (r->parent || !r->start || !r->flags)
-				continue;
-			if (pci_has_flag(PCI_PROBE_ONLY) ||
-			    (r->flags & IORESOURCE_PCI_FIXED))
-				pci_claim_resource(dev, i);
-		}
-	}
-
-	list_for_each_entry(child_bus, &b->children, node)
-		pcibios_claim_one_bus(child_bus);
-}
-
-static void __init
-pcibios_claim_console_setup(void)
-{
-	struct pci_bus *b;
-
-	list_for_each_entry(b, &pci_root_buses, node)
-		pcibios_claim_one_bus(b);
-}
-
-void __init
-common_init_pci(void)
-{
-	struct pci_controller *hose;
-	struct list_head resources;
-	struct pci_bus *bus;
-	int next_busno;
-	int need_domain_info = 0;
-	u32 pci_mem_end;
-	u32 sg_base;
-	unsigned long end;
-
-	/* Scan all of the recorded PCI controllers.  */
-	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-		sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
-
-		/* Adjust hose mem_space limit to prevent PCI allocations
-		   in the iommu windows. */
-		pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
-		end = hose->mem_space->start + pci_mem_end;
-		if (hose->mem_space->end > end)
-			hose->mem_space->end = end;
-
-		INIT_LIST_HEAD(&resources);
-		pci_add_resource_offset(&resources, hose->io_space,
-					hose->io_space->start);
-		pci_add_resource_offset(&resources, hose->mem_space,
-					hose->mem_space->start);
-
-		bus = pci_scan_root_bus(NULL, next_busno, alpha_mv.pci_ops,
-					hose, &resources);
-		hose->bus = bus;
-		hose->need_domain_info = need_domain_info;
-		next_busno = bus->subordinate + 1;
-		/* Don't allow 8-bit bus number overflow inside the hose -
-		   reserve some space for bridges. */ 
-		if (next_busno > 224) {
-			next_busno = 0;
-			need_domain_info = 1;
-		}
-	}
-
-	pcibios_claim_console_setup();
-
-	pci_assign_unassigned_resources();
-	pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
-}
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = alloc_bootmem(sizeof(*hose));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
-	struct resource *res;
-
-	res = alloc_bootmem(sizeof(*res));
-
-	return res;
-}
-
-
-/* Provide information on locations of various I/O regions in physical
-   memory.  Do this on a per-card basis so that we choose the right hose.  */
-
-asmlinkage long
-sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
-{
-	struct pci_controller *hose;
-	struct pci_dev *dev;
-
-	/* from hose or from bus.devfn */
-	if (which & IOBASE_FROM_HOSE) {
-		for(hose = hose_head; hose; hose = hose->next) 
-			if (hose->index == bus) break;
-		if (!hose) return -ENODEV;
-	} else {
-		/* Special hook for ISA access.  */
-		if (bus == 0 && dfn == 0) {
-			hose = pci_isa_hose;
-		} else {
-			dev = pci_get_bus_and_slot(bus, dfn);
-			if (!dev)
-				return -ENODEV;
-			hose = dev->sysdata;
-			pci_dev_put(dev);
-		}
-	}
-
-	switch (which & ~IOBASE_FROM_HOSE) {
-	case IOBASE_HOSE:
-		return hose->index;
-	case IOBASE_SPARSE_MEM:
-		return hose->sparse_mem_base;
-	case IOBASE_DENSE_MEM:
-		return hose->dense_mem_base;
-	case IOBASE_SPARSE_IO:
-		return hose->sparse_io_base;
-	case IOBASE_DENSE_IO:
-		return hose->dense_io_base;
-	case IOBASE_ROOT_BUS:
-		return hose->bus->number;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-/* Destroy an __iomem token.  Not copied from lib/iomap.c.  */
-
-void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
-{
-	if (__is_mmio(addr))
-		iounmap(addr);
-}
-
-EXPORT_SYMBOL(pci_iounmap);
-
-/* FIXME: Some boxes have multiple ISA bridges! */
-struct pci_dev *isa_bridge;
-EXPORT_SYMBOL(isa_bridge);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pci_impl.h b/ANDROID_3.4.5/arch/alpha/kernel/pci_impl.h
deleted file mode 100644
index 2b0ac429..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pci_impl.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/pci_impl.h
- *
- * This file contains declarations and inline functions for interfacing
- * with the PCI initialization routines.
- */
-
-struct pci_dev;
-struct pci_controller;
-struct pci_iommu_arena;
-
-/*
- * We can't just blindly use 64K for machines with EISA busses; they
- * may also have PCI-PCI bridges present, and then we'd configure the
- * bridge incorrectly.
- *
- * Also, we start at 0x8000 or 0x9000, in hopes to get all devices'
- * IO space areas allocated *before* 0xC000; this is because certain
- * BIOSes (Millennium for one) use PCI Config space "mechanism #2"
- * accesses to probe the bus. If a device's registers appear at 0xC000,
- * it may see an INx/OUTx at that address during BIOS emulation of the
- * VGA BIOS, and some cards, notably Adaptec 2940UW, take mortal offense.
- */
-
-#define EISA_DEFAULT_IO_BASE	0x9000	/* start above 8th slot */
-#define DEFAULT_IO_BASE		0x8000	/* start at 8th slot */
-
-/*
- * We try to make the DEFAULT_MEM_BASE addresses *always* have more than
- * a single bit set. This is so that devices like the broken Myrinet card
- * will always have a PCI memory address that will never match a IDSEL
- * address in PCI Config space, which can cause problems with early rev cards.
- */
-
-/*
- * An XL is AVANTI (APECS) family, *but* it has only 27 bits of ISA address
- * that get passed through the PCI<->ISA bridge chip. Although this causes
- * us to set the PCI->Mem window bases lower than normal, we still allocate
- * PCI bus devices' memory addresses *below* the low DMA mapping window,
- * and hope they fit below 64Mb (to avoid conflicts), and so that they can
- * be accessed via SPARSE space.
- *
- * We accept the risk that a broken Myrinet card will be put into a true XL
- * and thus can more easily run into the problem described below.
- */
-#define XL_DEFAULT_MEM_BASE ((16+2)*1024*1024) /* 16M to 64M-1 is avail */
-
-/*
- * APECS and LCA have only 34 bits for physical addresses, thus limiting PCI
- * bus memory addresses for SPARSE access to be less than 128Mb.
- */
-#define APECS_AND_LCA_DEFAULT_MEM_BASE ((16+2)*1024*1024)
-
-/*
- * Because MCPCIA and T2 core logic support more bits for
- * physical addresses, they should allow an expanded range of SPARSE
- * memory addresses.  However, we do not use them all, in order to
- * avoid the HAE manipulation that would be needed.
- */
-#define MCPCIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
-#define T2_DEFAULT_MEM_BASE ((16+1)*1024*1024)
-
-/*
- * Because CIA and PYXIS have more bits for physical addresses,
- * they support an expanded range of SPARSE memory addresses.
- */
-#define DEFAULT_MEM_BASE ((128+16)*1024*1024)
-
-/* ??? Experimenting with no HAE for CIA.  */
-#define CIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
-
-#define IRONGATE_DEFAULT_MEM_BASE ((256*8-16)*1024*1024)
-
-#define DEFAULT_AGP_APER_SIZE	(64*1024*1024)
-
-/* 
- * A small note about bridges and interrupts.  The DECchip 21050 (and
- * later) adheres to the PCI-PCI bridge specification.  This says that
- * the interrupts on the other side of a bridge are swizzled in the
- * following manner:
- *
- * Dev    Interrupt   Interrupt 
- *        Pin on      Pin on 
- *        Device      Connector
- *
- *   4    A           A
- *        B           B
- *        C           C
- *        D           D
- * 
- *   5    A           B
- *        B           C
- *        C           D
- *        D           A
- *
- *   6    A           C
- *        B           D
- *        C           A
- *        D           B
- *
- *   7    A           D
- *        B           A
- *        C           B
- *        D           C
- *
- *   Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
- *   Thus, each swizzle is ((pin-1) + (device#-4)) % 4
- *
- *   pci_swizzle_interrupt_pin() swizzles for exactly one bridge.  The routine
- *   pci_common_swizzle() handles multiple bridges.  But there are a
- *   couple boards that do strange things.
- */
-
-
-/* The following macro is used to implement the table-based irq mapping
-   function for all single-bus Alphas.  */
-
-#define COMMON_TABLE_LOOKUP						\
-({ long _ctl_ = -1; 							\
-   if (slot >= min_idsel && slot <= max_idsel && pin < irqs_per_slot)	\
-     _ctl_ = irq_tab[slot - min_idsel][pin];				\
-   _ctl_; })
-
-
-/* A PCI IOMMU allocation arena.  There are typically two of these
-   regions per bus.  */
-/* ??? The 8400 has a 32-byte pte entry, and the entire table apparently
-   lives directly on the host bridge (no tlb?).  We don't support this
-   machine, but if we ever did, we'd need to parameterize all this quite
-   a bit further.  Probably with per-bus operation tables.  */
-
-struct pci_iommu_arena
-{
-	spinlock_t lock;
-	struct pci_controller *hose;
-#define IOMMU_INVALID_PTE 0x2 /* 32:63 bits MBZ */
-#define IOMMU_RESERVED_PTE 0xface
-	unsigned long *ptes;
-	dma_addr_t dma_base;
-	unsigned int size;
-	unsigned int next_entry;
-	unsigned int align_entry;
-};
-
-#if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA))
-# define NEED_SRM_SAVE_RESTORE
-#else
-# undef NEED_SRM_SAVE_RESTORE
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(NEED_SRM_SAVE_RESTORE)
-# define ALPHA_RESTORE_SRM_SETUP
-#else
-# undef ALPHA_RESTORE_SRM_SETUP
-#endif
-
-#ifdef ALPHA_RESTORE_SRM_SETUP
-/* Store PCI device configuration left by SRM here. */
-struct pdev_srm_saved_conf
-{
-	struct pdev_srm_saved_conf *next;
-	struct pci_dev *dev;
-};
-
-extern void pci_restore_srm_config(void);
-#else
-#define pdev_save_srm_config(dev)	do {} while (0)
-#define pci_restore_srm_config()	do {} while (0)
-#endif
-
-/* The hose list.  */
-extern struct pci_controller *hose_head, **hose_tail;
-extern struct pci_controller *pci_isa_hose;
-
-extern unsigned long alpha_agpgart_size;
-
-extern void common_init_pci(void);
-#define common_swizzle pci_common_swizzle
-extern struct pci_controller *alloc_pci_controller(void);
-extern struct resource *alloc_resource(void);
-
-extern struct pci_iommu_arena *iommu_arena_new_node(int,
-						    struct pci_controller *,
-					            dma_addr_t, unsigned long,
-					            unsigned long);
-extern struct pci_iommu_arena *iommu_arena_new(struct pci_controller *,
-					       dma_addr_t, unsigned long,
-					       unsigned long);
-extern const char *const pci_io_names[];
-extern const char *const pci_mem_names[];
-extern const char pci_hae0_name[];
-
-extern unsigned long size_for_memory(unsigned long max);
-
-extern int iommu_reserve(struct pci_iommu_arena *, long, long);
-extern int iommu_release(struct pci_iommu_arena *, long, long);
-extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
-extern int iommu_unbind(struct pci_iommu_arena *, long, long);
-
-
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/pci_iommu.c b/ANDROID_3.4.5/arch/alpha/kernel/pci_iommu.c
deleted file mode 100644
index cd634795..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/pci_iommu.c
+++ /dev/null
@@ -1,969 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/pci_iommu.c
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/gfp.h>
-#include <linux/bootmem.h>
-#include <linux/export.h>
-#include <linux/scatterlist.h>
-#include <linux/log2.h>
-#include <linux/dma-mapping.h>
-#include <linux/iommu-helper.h>
-
-#include <asm/io.h>
-#include <asm/hwrpb.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-#define DEBUG_ALLOC 0
-#if DEBUG_ALLOC > 0
-# define DBGA(args...)		printk(KERN_DEBUG args)
-#else
-# define DBGA(args...)
-#endif
-#if DEBUG_ALLOC > 1
-# define DBGA2(args...)		printk(KERN_DEBUG args)
-#else
-# define DBGA2(args...)
-#endif
-
-#define DEBUG_NODIRECT 0
-
-#define ISA_DMA_MASK		0x00ffffff
-
-static inline unsigned long
-mk_iommu_pte(unsigned long paddr)
-{
-	return (paddr >> (PAGE_SHIFT-1)) | 1;
-}
-
-/* Return the minimum of MAX or the first power of two larger
-   than main memory.  */
-
-unsigned long
-size_for_memory(unsigned long max)
-{
-	unsigned long mem = max_low_pfn << PAGE_SHIFT;
-	if (mem < max)
-		max = roundup_pow_of_two(mem);
-	return max;
-}
-
-struct pci_iommu_arena * __init
-iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
-		     unsigned long window_size, unsigned long align)
-{
-	unsigned long mem_size;
-	struct pci_iommu_arena *arena;
-
-	mem_size = window_size / (PAGE_SIZE / sizeof(unsigned long));
-
-	/* Note that the TLB lookup logic uses bitwise concatenation,
-	   not addition, so the required arena alignment is based on
-	   the size of the window.  Retain the align parameter so that
-	   particular systems can over-align the arena.  */
-	if (align < mem_size)
-		align = mem_size;
-
-
-#ifdef CONFIG_DISCONTIGMEM
-
-	arena = alloc_bootmem_node(NODE_DATA(nid), sizeof(*arena));
-	if (!NODE_DATA(nid) || !arena) {
-		printk("%s: couldn't allocate arena from node %d\n"
-		       "    falling back to system-wide allocation\n",
-		       __func__, nid);
-		arena = alloc_bootmem(sizeof(*arena));
-	}
-
-	arena->ptes = __alloc_bootmem_node(NODE_DATA(nid), mem_size, align, 0);
-	if (!NODE_DATA(nid) || !arena->ptes) {
-		printk("%s: couldn't allocate arena ptes from node %d\n"
-		       "    falling back to system-wide allocation\n",
-		       __func__, nid);
-		arena->ptes = __alloc_bootmem(mem_size, align, 0);
-	}
-
-#else /* CONFIG_DISCONTIGMEM */
-
-	arena = alloc_bootmem(sizeof(*arena));
-	arena->ptes = __alloc_bootmem(mem_size, align, 0);
-
-#endif /* CONFIG_DISCONTIGMEM */
-
-	spin_lock_init(&arena->lock);
-	arena->hose = hose;
-	arena->dma_base = base;
-	arena->size = window_size;
-	arena->next_entry = 0;
-
-	/* Align allocations to a multiple of a page size.  Not needed
-	   unless there are chip bugs.  */
-	arena->align_entry = 1;
-
-	return arena;
-}
-
-struct pci_iommu_arena * __init
-iommu_arena_new(struct pci_controller *hose, dma_addr_t base,
-		unsigned long window_size, unsigned long align)
-{
-	return iommu_arena_new_node(0, hose, base, window_size, align);
-}
-
-/* Must be called with the arena lock held */
-static long
-iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
-		       long n, long mask)
-{
-	unsigned long *ptes;
-	long i, p, nent;
-	int pass = 0;
-	unsigned long base;
-	unsigned long boundary_size;
-
-	base = arena->dma_base >> PAGE_SHIFT;
-	if (dev) {
-		boundary_size = dma_get_seg_boundary(dev) + 1;
-		boundary_size >>= PAGE_SHIFT;
-	} else {
-		boundary_size = 1UL << (32 - PAGE_SHIFT);
-	}
-
-	/* Search forward for the first mask-aligned sequence of N free ptes */
-	ptes = arena->ptes;
-	nent = arena->size >> PAGE_SHIFT;
-	p = ALIGN(arena->next_entry, mask + 1);
-	i = 0;
-
-again:
-	while (i < n && p+i < nent) {
-		if (!i && iommu_is_span_boundary(p, n, base, boundary_size)) {
-			p = ALIGN(p + 1, mask + 1);
-			goto again;
-		}
-
-		if (ptes[p+i])
-			p = ALIGN(p + i + 1, mask + 1), i = 0;
-		else
-			i = i + 1;
-	}
-
-	if (i < n) {
-		if (pass < 1) {
-			/*
-			 * Reached the end.  Flush the TLB and restart
-			 * the search from the beginning.
-			*/
-			alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
-
-			pass++;
-			p = 0;
-			i = 0;
-			goto again;
-		} else
-			return -1;
-	}
-
-	/* Success. It's the responsibility of the caller to mark them
-	   in use before releasing the lock */
-	return p;
-}
-
-static long
-iommu_arena_alloc(struct device *dev, struct pci_iommu_arena *arena, long n,
-		  unsigned int align)
-{
-	unsigned long flags;
-	unsigned long *ptes;
-	long i, p, mask;
-
-	spin_lock_irqsave(&arena->lock, flags);
-
-	/* Search for N empty ptes */
-	ptes = arena->ptes;
-	mask = max(align, arena->align_entry) - 1;
-	p = iommu_arena_find_pages(dev, arena, n, mask);
-	if (p < 0) {
-		spin_unlock_irqrestore(&arena->lock, flags);
-		return -1;
-	}
-
-	/* Success.  Mark them all in use, ie not zero and invalid
-	   for the iommu tlb that could load them from under us.
-	   The chip specific bits will fill this in with something
-	   kosher when we return.  */
-	for (i = 0; i < n; ++i)
-		ptes[p+i] = IOMMU_INVALID_PTE;
-
-	arena->next_entry = p + n;
-	spin_unlock_irqrestore(&arena->lock, flags);
-
-	return p;
-}
-
-static void
-iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
-{
-	unsigned long *p;
-	long i;
-
-	p = arena->ptes + ofs;
-	for (i = 0; i < n; ++i)
-		p[i] = 0;
-}
-
-/*
- * True if the machine supports DAC addressing, and DEV can
- * make use of it given MASK.
- */
-static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
-{
-	dma_addr_t dac_offset = alpha_mv.pci_dac_offset;
-	int ok = 1;
-
-	/* If this is not set, the machine doesn't support DAC at all.  */
-	if (dac_offset == 0)
-		ok = 0;
-
-	/* The device has to be able to address our DAC bit.  */
-	if ((dac_offset & dev->dma_mask) != dac_offset)
-		ok = 0;
-
-	/* If both conditions above are met, we are fine. */
-	DBGA("pci_dac_dma_supported %s from %p\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
-
-	return ok;
-}
-
-/* Map a single buffer of the indicated size for PCI DMA in streaming
-   mode.  The 32-bit PCI bus mastering address to use is returned.
-   Once the device is given the dma address, the device owns this memory
-   until either pci_unmap_single or pci_dma_sync_single is performed.  */
-
-static dma_addr_t
-pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
-		 int dac_allowed)
-{
-	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
-	dma_addr_t max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
-	struct pci_iommu_arena *arena;
-	long npages, dma_ofs, i;
-	unsigned long paddr;
-	dma_addr_t ret;
-	unsigned int align = 0;
-	struct device *dev = pdev ? &pdev->dev : NULL;
-
-	paddr = __pa(cpu_addr);
-
-#if !DEBUG_NODIRECT
-	/* First check to see if we can use the direct map window.  */
-	if (paddr + size + __direct_map_base - 1 <= max_dma
-	    && paddr + size <= __direct_map_size) {
-		ret = paddr + __direct_map_base;
-
-		DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %p\n",
-		      cpu_addr, size, ret, __builtin_return_address(0));
-
-		return ret;
-	}
-#endif
-
-	/* Next, use DAC if selected earlier.  */
-	if (dac_allowed) {
-		ret = paddr + alpha_mv.pci_dac_offset;
-
-		DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %p\n",
-		      cpu_addr, size, ret, __builtin_return_address(0));
-
-		return ret;
-	}
-
-	/* If the machine doesn't define a pci_tbi routine, we have to
-	   assume it doesn't support sg mapping, and, since we tried to
-	   use direct_map above, it now must be considered an error. */
-	if (! alpha_mv.mv_pci_tbi) {
-		printk_once(KERN_WARNING "pci_map_single: no HW sg\n");
-		return 0;
-	}
-
-	arena = hose->sg_pci;
-	if (!arena || arena->dma_base + arena->size - 1 > max_dma)
-		arena = hose->sg_isa;
-
-	npages = iommu_num_pages(paddr, size, PAGE_SIZE);
-
-	/* Force allocation to 64KB boundary for ISA bridges. */
-	if (pdev && pdev == isa_bridge)
-		align = 8;
-	dma_ofs = iommu_arena_alloc(dev, arena, npages, align);
-	if (dma_ofs < 0) {
-		printk(KERN_WARNING "pci_map_single failed: "
-		       "could not allocate dma page tables\n");
-		return 0;
-	}
-
-	paddr &= PAGE_MASK;
-	for (i = 0; i < npages; ++i, paddr += PAGE_SIZE)
-		arena->ptes[i + dma_ofs] = mk_iommu_pte(paddr);
-
-	ret = arena->dma_base + dma_ofs * PAGE_SIZE;
-	ret += (unsigned long)cpu_addr & ~PAGE_MASK;
-
-	DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %p\n",
-	      cpu_addr, size, npages, ret, __builtin_return_address(0));
-
-	return ret;
-}
-
-/* Helper for generic DMA-mapping functions. */
-static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
-{
-	if (dev && dev->bus == &pci_bus_type)
-		return to_pci_dev(dev);
-
-	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
-	   BUG() otherwise. */
-	BUG_ON(!isa_bridge);
-
-	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
-	   bridge is bus master then). */
-	if (!dev || !dev->dma_mask || !*dev->dma_mask)
-		return isa_bridge;
-
-	/* For EISA bus masters, return isa_bridge (it might have smaller
-	   dma_mask due to wiring limitations). */
-	if (*dev->dma_mask >= isa_bridge->dma_mask)
-		return isa_bridge;
-
-	/* This assumes ISA bus master with dma_mask 0xffffff. */
-	return NULL;
-}
-
-static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
-				     unsigned long offset, size_t size,
-				     enum dma_data_direction dir,
-				     struct dma_attrs *attrs)
-{
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	int dac_allowed;
-
-	if (dir == PCI_DMA_NONE)
-		BUG();
-
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
-	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
-				size, dac_allowed);
-}
-
-/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
-   SIZE must match what was provided for in a previous pci_map_single
-   call.  All other usages are undefined.  After this call, reads by
-   the cpu to the buffer are guaranteed to see whatever the device
-   wrote there.  */
-
-static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
-				 size_t size, enum dma_data_direction dir,
-				 struct dma_attrs *attrs)
-{
-	unsigned long flags;
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
-	struct pci_iommu_arena *arena;
-	long dma_ofs, npages;
-
-	if (dir == PCI_DMA_NONE)
-		BUG();
-
-	if (dma_addr >= __direct_map_base
-	    && dma_addr < __direct_map_base + __direct_map_size) {
-		/* Nothing to do.  */
-
-		DBGA2("pci_unmap_single: direct [%llx,%zx] from %p\n",
-		      dma_addr, size, __builtin_return_address(0));
-
-		return;
-	}
-
-	if (dma_addr > 0xffffffff) {
-		DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %p\n",
-		      dma_addr, size, __builtin_return_address(0));
-		return;
-	}
-
-	arena = hose->sg_pci;
-	if (!arena || dma_addr < arena->dma_base)
-		arena = hose->sg_isa;
-
-	dma_ofs = (dma_addr - arena->dma_base) >> PAGE_SHIFT;
-	if (dma_ofs * PAGE_SIZE >= arena->size) {
-		printk(KERN_ERR "Bogus pci_unmap_single: dma_addr %llx "
-		       " base %llx size %x\n",
-		       dma_addr, arena->dma_base, arena->size);
-		return;
-		BUG();
-	}
-
-	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
-
-	spin_lock_irqsave(&arena->lock, flags);
-
-	iommu_arena_free(arena, dma_ofs, npages);
-
-        /* If we're freeing ptes above the `next_entry' pointer (they
-           may have snuck back into the TLB since the last wrap flush),
-           we need to flush the TLB before reallocating the latter.  */
-	if (dma_ofs >= arena->next_entry)
-		alpha_mv.mv_pci_tbi(hose, dma_addr, dma_addr + size - 1);
-
-	spin_unlock_irqrestore(&arena->lock, flags);
-
-	DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
-	      dma_addr, size, npages, __builtin_return_address(0));
-}
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDRP to the pci side dma address as well,
-   else DMA_ADDRP is undefined.  */
-
-static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
-				      dma_addr_t *dma_addrp, gfp_t gfp,
-				      struct dma_attrs *attrs)
-{
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	void *cpu_addr;
-	long order = get_order(size);
-
-	gfp &= ~GFP_DMA;
-
-try_again:
-	cpu_addr = (void *)__get_free_pages(gfp, order);
-	if (! cpu_addr) {
-		printk(KERN_INFO "pci_alloc_consistent: "
-		       "get_free_pages failed from %p\n",
-			__builtin_return_address(0));
-		/* ??? Really atomic allocation?  Otherwise we could play
-		   with vmalloc and sg if we can't find contiguous memory.  */
-		return NULL;
-	}
-	memset(cpu_addr, 0, size);
-
-	*dma_addrp = pci_map_single_1(pdev, cpu_addr, size, 0);
-	if (*dma_addrp == 0) {
-		free_pages((unsigned long)cpu_addr, order);
-		if (alpha_mv.mv_pci_tbi || (gfp & GFP_DMA))
-			return NULL;
-		/* The address doesn't fit required mask and we
-		   do not have iommu. Try again with GFP_DMA. */
-		gfp |= GFP_DMA;
-		goto try_again;
-	}
-
-	DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
-	      size, cpu_addr, *dma_addrp, __builtin_return_address(0));
-
-	return cpu_addr;
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must
-   be the same as what as passed into pci_alloc_consistent.
-   References to the memory and mappings associated with CPU_ADDR or
-   DMA_ADDR past this call are illegal.  */
-
-static void alpha_pci_free_coherent(struct device *dev, size_t size,
-				    void *cpu_addr, dma_addr_t dma_addr,
-				    struct dma_attrs *attrs)
-{
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
-	free_pages((unsigned long)cpu_addr, get_order(size));
-
-	DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
-	      dma_addr, size, __builtin_return_address(0));
-}
-
-/* Classify the elements of the scatterlist.  Write dma_address
-   of each element with:
-	0   : Followers all physically adjacent.
-	1   : Followers all virtually adjacent.
-	-1  : Not leader, physically adjacent to previous.
-	-2  : Not leader, virtually adjacent to previous.
-   Write dma_length of each leader with the combined lengths of
-   the mergable followers.  */
-
-#define SG_ENT_VIRT_ADDRESS(SG) (sg_virt((SG)))
-#define SG_ENT_PHYS_ADDRESS(SG) __pa(SG_ENT_VIRT_ADDRESS(SG))
-
-static void
-sg_classify(struct device *dev, struct scatterlist *sg, struct scatterlist *end,
-	    int virt_ok)
-{
-	unsigned long next_paddr;
-	struct scatterlist *leader;
-	long leader_flag, leader_length;
-	unsigned int max_seg_size;
-
-	leader = sg;
-	leader_flag = 0;
-	leader_length = leader->length;
-	next_paddr = SG_ENT_PHYS_ADDRESS(leader) + leader_length;
-
-	/* we will not marge sg without device. */
-	max_seg_size = dev ? dma_get_max_seg_size(dev) : 0;
-	for (++sg; sg < end; ++sg) {
-		unsigned long addr, len;
-		addr = SG_ENT_PHYS_ADDRESS(sg);
-		len = sg->length;
-
-		if (leader_length + len > max_seg_size)
-			goto new_segment;
-
-		if (next_paddr == addr) {
-			sg->dma_address = -1;
-			leader_length += len;
-		} else if (((next_paddr | addr) & ~PAGE_MASK) == 0 && virt_ok) {
-			sg->dma_address = -2;
-			leader_flag = 1;
-			leader_length += len;
-		} else {
-new_segment:
-			leader->dma_address = leader_flag;
-			leader->dma_length = leader_length;
-			leader = sg;
-			leader_flag = 0;
-			leader_length = len;
-		}
-
-		next_paddr = addr + len;
-	}
-
-	leader->dma_address = leader_flag;
-	leader->dma_length = leader_length;
-}
-
-/* Given a scatterlist leader, choose an allocation method and fill
-   in the blanks.  */
-
-static int
-sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
-	struct scatterlist *out, struct pci_iommu_arena *arena,
-	dma_addr_t max_dma, int dac_allowed)
-{
-	unsigned long paddr = SG_ENT_PHYS_ADDRESS(leader);
-	long size = leader->dma_length;
-	struct scatterlist *sg;
-	unsigned long *ptes;
-	long npages, dma_ofs, i;
-
-#if !DEBUG_NODIRECT
-	/* If everything is physically contiguous, and the addresses
-	   fall into the direct-map window, use it.  */
-	if (leader->dma_address == 0
-	    && paddr + size + __direct_map_base - 1 <= max_dma
-	    && paddr + size <= __direct_map_size) {
-		out->dma_address = paddr + __direct_map_base;
-		out->dma_length = size;
-
-		DBGA("    sg_fill: [%p,%lx] -> direct %llx\n",
-		     __va(paddr), size, out->dma_address);
-
-		return 0;
-	}
-#endif
-
-	/* If physically contiguous and DAC is available, use it.  */
-	if (leader->dma_address == 0 && dac_allowed) {
-		out->dma_address = paddr + alpha_mv.pci_dac_offset;
-		out->dma_length = size;
-
-		DBGA("    sg_fill: [%p,%lx] -> DAC %llx\n",
-		     __va(paddr), size, out->dma_address);
-
-		return 0;
-	}
-
-	/* Otherwise, we'll use the iommu to make the pages virtually
-	   contiguous.  */
-
-	paddr &= ~PAGE_MASK;
-	npages = iommu_num_pages(paddr, size, PAGE_SIZE);
-	dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
-	if (dma_ofs < 0) {
-		/* If we attempted a direct map above but failed, die.  */
-		if (leader->dma_address == 0)
-			return -1;
-
-		/* Otherwise, break up the remaining virtually contiguous
-		   hunks into individual direct maps and retry.  */
-		sg_classify(dev, leader, end, 0);
-		return sg_fill(dev, leader, end, out, arena, max_dma, dac_allowed);
-	}
-
-	out->dma_address = arena->dma_base + dma_ofs*PAGE_SIZE + paddr;
-	out->dma_length = size;
-
-	DBGA("    sg_fill: [%p,%lx] -> sg %llx np %ld\n",
-	     __va(paddr), size, out->dma_address, npages);
-
-	/* All virtually contiguous.  We need to find the length of each
-	   physically contiguous subsegment to fill in the ptes.  */
-	ptes = &arena->ptes[dma_ofs];
-	sg = leader;
-	do {
-#if DEBUG_ALLOC > 0
-		struct scatterlist *last_sg = sg;
-#endif
-
-		size = sg->length;
-		paddr = SG_ENT_PHYS_ADDRESS(sg);
-
-		while (sg+1 < end && (int) sg[1].dma_address == -1) {
-			size += sg[1].length;
-			sg++;
-		}
-
-		npages = iommu_num_pages(paddr, size, PAGE_SIZE);
-
-		paddr &= PAGE_MASK;
-		for (i = 0; i < npages; ++i, paddr += PAGE_SIZE)
-			*ptes++ = mk_iommu_pte(paddr);
-
-#if DEBUG_ALLOC > 0
-		DBGA("    (%ld) [%p,%x] np %ld\n",
-		     last_sg - leader, SG_ENT_VIRT_ADDRESS(last_sg),
-		     last_sg->length, npages);
-		while (++last_sg <= sg) {
-			DBGA("        (%ld) [%p,%x] cont\n",
-			     last_sg - leader, SG_ENT_VIRT_ADDRESS(last_sg),
-			     last_sg->length);
-		}
-#endif
-	} while (++sg < end && (int) sg->dma_address < 0);
-
-	return 1;
-}
-
-static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
-			    int nents, enum dma_data_direction dir,
-			    struct dma_attrs *attrs)
-{
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	struct scatterlist *start, *end, *out;
-	struct pci_controller *hose;
-	struct pci_iommu_arena *arena;
-	dma_addr_t max_dma;
-	int dac_allowed;
-
-	if (dir == PCI_DMA_NONE)
-		BUG();
-
-	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
-
-	/* Fast path single entry scatterlists.  */
-	if (nents == 1) {
-		sg->dma_length = sg->length;
-		sg->dma_address
-		  = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg),
-				     sg->length, dac_allowed);
-		return sg->dma_address != 0;
-	}
-
-	start = sg;
-	end = sg + nents;
-
-	/* First, prepare information about the entries.  */
-	sg_classify(dev, sg, end, alpha_mv.mv_pci_tbi != 0);
-
-	/* Second, figure out where we're going to map things.  */
-	if (alpha_mv.mv_pci_tbi) {
-		hose = pdev ? pdev->sysdata : pci_isa_hose;
-		max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
-		arena = hose->sg_pci;
-		if (!arena || arena->dma_base + arena->size - 1 > max_dma)
-			arena = hose->sg_isa;
-	} else {
-		max_dma = -1;
-		arena = NULL;
-		hose = NULL;
-	}
-
-	/* Third, iterate over the scatterlist leaders and allocate
-	   dma space as needed.  */
-	for (out = sg; sg < end; ++sg) {
-		if ((int) sg->dma_address < 0)
-			continue;
-		if (sg_fill(dev, sg, end, out, arena, max_dma, dac_allowed) < 0)
-			goto error;
-		out++;
-	}
-
-	/* Mark the end of the list for pci_unmap_sg.  */
-	if (out < end)
-		out->dma_length = 0;
-
-	if (out - start == 0)
-		printk(KERN_WARNING "pci_map_sg failed: no entries?\n");
-	DBGA("pci_map_sg: %ld entries\n", out - start);
-
-	return out - start;
-
- error:
-	printk(KERN_WARNING "pci_map_sg failed: "
-	       "could not allocate dma page tables\n");
-
-	/* Some allocation failed while mapping the scatterlist
-	   entries.  Unmap them now.  */
-	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, dir);
-	return 0;
-}
-
-/* Unmap a set of streaming mode DMA translations.  Again, cpu read
-   rules concerning calls here are the same as for pci_unmap_single()
-   above.  */
-
-static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
-			       int nents, enum dma_data_direction dir,
-			       struct dma_attrs *attrs)
-{
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	unsigned long flags;
-	struct pci_controller *hose;
-	struct pci_iommu_arena *arena;
-	struct scatterlist *end;
-	dma_addr_t max_dma;
-	dma_addr_t fbeg, fend;
-
-	if (dir == PCI_DMA_NONE)
-		BUG();
-
-	if (! alpha_mv.mv_pci_tbi)
-		return;
-
-	hose = pdev ? pdev->sysdata : pci_isa_hose;
-	max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
-	arena = hose->sg_pci;
-	if (!arena || arena->dma_base + arena->size - 1 > max_dma)
-		arena = hose->sg_isa;
-
-	fbeg = -1, fend = 0;
-
-	spin_lock_irqsave(&arena->lock, flags);
-
-	for (end = sg + nents; sg < end; ++sg) {
-		dma_addr_t addr;
-		size_t size;
-		long npages, ofs;
-		dma_addr_t tend;
-
-		addr = sg->dma_address;
-		size = sg->dma_length;
-		if (!size)
-			break;
-
-		if (addr > 0xffffffff) {
-			/* It's a DAC address -- nothing to do.  */
-			DBGA("    (%ld) DAC [%llx,%zx]\n",
-			      sg - end + nents, addr, size);
-			continue;
-		}
-
-		if (addr >= __direct_map_base
-		    && addr < __direct_map_base + __direct_map_size) {
-			/* Nothing to do.  */
-			DBGA("    (%ld) direct [%llx,%zx]\n",
-			      sg - end + nents, addr, size);
-			continue;
-		}
-
-		DBGA("    (%ld) sg [%llx,%zx]\n",
-		     sg - end + nents, addr, size);
-
-		npages = iommu_num_pages(addr, size, PAGE_SIZE);
-		ofs = (addr - arena->dma_base) >> PAGE_SHIFT;
-		iommu_arena_free(arena, ofs, npages);
-
-		tend = addr + size - 1;
-		if (fbeg > addr) fbeg = addr;
-		if (fend < tend) fend = tend;
-	}
-
-        /* If we're freeing ptes above the `next_entry' pointer (they
-           may have snuck back into the TLB since the last wrap flush),
-           we need to flush the TLB before reallocating the latter.  */
-	if ((fend - arena->dma_base) >> PAGE_SHIFT >= arena->next_entry)
-		alpha_mv.mv_pci_tbi(hose, fbeg, fend);
-
-	spin_unlock_irqrestore(&arena->lock, flags);
-
-	DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg));
-}
-
-/* Return whether the given PCI device DMA address mask can be
-   supported properly.  */
-
-static int alpha_pci_supported(struct device *dev, u64 mask)
-{
-	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	struct pci_controller *hose;
-	struct pci_iommu_arena *arena;
-
-	/* If there exists a direct map, and the mask fits either
-	   the entire direct mapped space or the total system memory as
-	   shifted by the map base */
-	if (__direct_map_size != 0
-	    && (__direct_map_base + __direct_map_size - 1 <= mask ||
-		__direct_map_base + (max_low_pfn << PAGE_SHIFT) - 1 <= mask))
-		return 1;
-
-	/* Check that we have a scatter-gather arena that fits.  */
-	hose = pdev ? pdev->sysdata : pci_isa_hose;
-	arena = hose->sg_isa;
-	if (arena && arena->dma_base + arena->size - 1 <= mask)
-		return 1;
-	arena = hose->sg_pci;
-	if (arena && arena->dma_base + arena->size - 1 <= mask)
-		return 1;
-
-	/* As last resort try ZONE_DMA.  */
-	if (!__direct_map_base && MAX_DMA_ADDRESS - IDENT_ADDR - 1 <= mask)
-		return 1;
-
-	return 0;
-}
-
-
-/*
- * AGP GART extensions to the IOMMU
- */
-int
-iommu_reserve(struct pci_iommu_arena *arena, long pg_count, long align_mask) 
-{
-	unsigned long flags;
-	unsigned long *ptes;
-	long i, p;
-
-	if (!arena) return -EINVAL;
-
-	spin_lock_irqsave(&arena->lock, flags);
-
-	/* Search for N empty ptes.  */
-	ptes = arena->ptes;
-	p = iommu_arena_find_pages(NULL, arena, pg_count, align_mask);
-	if (p < 0) {
-		spin_unlock_irqrestore(&arena->lock, flags);
-		return -1;
-	}
-
-	/* Success.  Mark them all reserved (ie not zero and invalid)
-	   for the iommu tlb that could load them from under us.
-	   They will be filled in with valid bits by _bind() */
-	for (i = 0; i < pg_count; ++i)
-		ptes[p+i] = IOMMU_RESERVED_PTE;
-
-	arena->next_entry = p + pg_count;
-	spin_unlock_irqrestore(&arena->lock, flags);
-
-	return p;
-}
-
-int 
-iommu_release(struct pci_iommu_arena *arena, long pg_start, long pg_count)
-{
-	unsigned long *ptes;
-	long i;
-
-	if (!arena) return -EINVAL;
-
-	ptes = arena->ptes;
-
-	/* Make sure they're all reserved first... */
-	for(i = pg_start; i < pg_start + pg_count; i++)
-		if (ptes[i] != IOMMU_RESERVED_PTE)
-			return -EBUSY;
-
-	iommu_arena_free(arena, pg_start, pg_count);
-	return 0;
-}
-
-int
-iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count, 
-	   struct page **pages)
-{
-	unsigned long flags;
-	unsigned long *ptes;
-	long i, j;
-
-	if (!arena) return -EINVAL;
-	
-	spin_lock_irqsave(&arena->lock, flags);
-
-	ptes = arena->ptes;
-
-	for(j = pg_start; j < pg_start + pg_count; j++) {
-		if (ptes[j] != IOMMU_RESERVED_PTE) {
-			spin_unlock_irqrestore(&arena->lock, flags);
-			return -EBUSY;
-		}
-	}
-		
-	for(i = 0, j = pg_start; i < pg_count; i++, j++)
-		ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
-
-	spin_unlock_irqrestore(&arena->lock, flags);
-
-	return 0;
-}
-
-int
-iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
-{
-	unsigned long *p;
-	long i;
-
-	if (!arena) return -EINVAL;
-
-	p = arena->ptes + pg_start;
-	for(i = 0; i < pg_count; i++)
-		p[i] = IOMMU_RESERVED_PTE;
-
-	return 0;
-}
-
-static int alpha_pci_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-static int alpha_pci_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask ||
-	    !pci_dma_supported(alpha_gendev_to_pci(dev), mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-	return 0;
-}
-
-struct dma_map_ops alpha_pci_ops = {
-	.alloc			= alpha_pci_alloc_coherent,
-	.free			= alpha_pci_free_coherent,
-	.map_page		= alpha_pci_map_page,
-	.unmap_page		= alpha_pci_unmap_page,
-	.map_sg			= alpha_pci_map_sg,
-	.unmap_sg		= alpha_pci_unmap_sg,
-	.mapping_error		= alpha_pci_mapping_error,
-	.dma_supported		= alpha_pci_supported,
-	.set_dma_mask		= alpha_pci_set_mask,
-};
-
-struct dma_map_ops *dma_ops = &alpha_pci_ops;
-EXPORT_SYMBOL(dma_ops);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/perf_event.c b/ANDROID_3.4.5/arch/alpha/kernel/perf_event.c
deleted file mode 100644
index 0dae252f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/perf_event.c
+++ /dev/null
@@ -1,893 +0,0 @@
-/*
- * Hardware performance events for the Alpha.
- *
- * We implement HW counts on the EV67 and subsequent CPUs only.
- *
- * (C) 2010 Michael J. Cree
- *
- * Somewhat based on the Sparc code, and to a lesser extent the PowerPC and
- * ARM code, which are copyright by their respective authors.
- */
-
-#include <linux/perf_event.h>
-#include <linux/kprobes.h>
-#include <linux/kernel.h>
-#include <linux/kdebug.h>
-#include <linux/mutex.h>
-#include <linux/init.h>
-
-#include <asm/hwrpb.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-#include <asm/irq_regs.h>
-#include <asm/pal.h>
-#include <asm/wrperfmon.h>
-#include <asm/hw_irq.h>
-
-
-/* The maximum number of PMCs on any Alpha CPU whatsoever. */
-#define MAX_HWEVENTS 3
-#define PMC_NO_INDEX -1
-
-/* For tracking PMCs and the hw events they monitor on each CPU. */
-struct cpu_hw_events {
-	int			enabled;
-	/* Number of events scheduled; also number entries valid in arrays below. */
-	int			n_events;
-	/* Number events added since last hw_perf_disable(). */
-	int			n_added;
-	/* Events currently scheduled. */
-	struct perf_event	*event[MAX_HWEVENTS];
-	/* Event type of each scheduled event. */
-	unsigned long		evtype[MAX_HWEVENTS];
-	/* Current index of each scheduled event; if not yet determined
-	 * contains PMC_NO_INDEX.
-	 */
-	int			current_idx[MAX_HWEVENTS];
-	/* The active PMCs' config for easy use with wrperfmon(). */
-	unsigned long		config;
-	/* The active counters' indices for easy use with wrperfmon(). */
-	unsigned long		idx_mask;
-};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-
-
-/*
- * A structure to hold the description of the PMCs available on a particular
- * type of Alpha CPU.
- */
-struct alpha_pmu_t {
-	/* Mapping of the perf system hw event types to indigenous event types */
-	const int *event_map;
-	/* The number of entries in the event_map */
-	int  max_events;
-	/* The number of PMCs on this Alpha */
-	int  num_pmcs;
-	/*
-	 * All PMC counters reside in the IBOX register PCTR.  This is the
-	 * LSB of the counter.
-	 */
-	int  pmc_count_shift[MAX_HWEVENTS];
-	/*
-	 * The mask that isolates the PMC bits when the LSB of the counter
-	 * is shifted to bit 0.
-	 */
-	unsigned long pmc_count_mask[MAX_HWEVENTS];
-	/* The maximum period the PMC can count. */
-	unsigned long pmc_max_period[MAX_HWEVENTS];
-	/*
-	 * The maximum value that may be written to the counter due to
-	 * hardware restrictions is pmc_max_period - pmc_left.
-	 */
-	long pmc_left[3];
-	 /* Subroutine for allocation of PMCs.  Enforces constraints. */
-	int (*check_constraints)(struct perf_event **, unsigned long *, int);
-};
-
-/*
- * The Alpha CPU PMU description currently in operation.  This is set during
- * the boot process to the specific CPU of the machine.
- */
-static const struct alpha_pmu_t *alpha_pmu;
-
-
-#define HW_OP_UNSUPPORTED -1
-
-/*
- * The hardware description of the EV67, EV68, EV69, EV7 and EV79 PMUs
- * follow. Since they are identical we refer to them collectively as the
- * EV67 henceforth.
- */
-
-/*
- * EV67 PMC event types
- *
- * There is no one-to-one mapping of the possible hw event types to the
- * actual codes that are used to program the PMCs hence we introduce our
- * own hw event type identifiers.
- */
-enum ev67_pmc_event_type {
-	EV67_CYCLES = 1,
-	EV67_INSTRUCTIONS,
-	EV67_BCACHEMISS,
-	EV67_MBOXREPLAY,
-	EV67_LAST_ET
-};
-#define EV67_NUM_EVENT_TYPES (EV67_LAST_ET-EV67_CYCLES)
-
-
-/* Mapping of the hw event types to the perf tool interface */
-static const int ev67_perfmon_event_map[] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	 = EV67_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	 = EV67_INSTRUCTIONS,
-	[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	 = EV67_BCACHEMISS,
-};
-
-struct ev67_mapping_t {
-	int config;
-	int idx;
-};
-
-/*
- * The mapping used for one event only - these must be in same order as enum
- * ev67_pmc_event_type definition.
- */
-static const struct ev67_mapping_t ev67_mapping[] = {
-	{EV67_PCTR_INSTR_CYCLES, 1},	 /* EV67_CYCLES, */
-	{EV67_PCTR_INSTR_CYCLES, 0},	 /* EV67_INSTRUCTIONS */
-	{EV67_PCTR_INSTR_BCACHEMISS, 1}, /* EV67_BCACHEMISS */
-	{EV67_PCTR_CYCLES_MBOX, 1}	 /* EV67_MBOXREPLAY */
-};
-
-
-/*
- * Check that a group of events can be simultaneously scheduled on to the
- * EV67 PMU.  Also allocate counter indices and config.
- */
-static int ev67_check_constraints(struct perf_event **event,
-				unsigned long *evtype, int n_ev)
-{
-	int idx0;
-	unsigned long config;
-
-	idx0 = ev67_mapping[evtype[0]-1].idx;
-	config = ev67_mapping[evtype[0]-1].config;
-	if (n_ev == 1)
-		goto success;
-
-	BUG_ON(n_ev != 2);
-
-	if (evtype[0] == EV67_MBOXREPLAY || evtype[1] == EV67_MBOXREPLAY) {
-		/* MBOX replay traps must be on PMC 1 */
-		idx0 = (evtype[0] == EV67_MBOXREPLAY) ? 1 : 0;
-		/* Only cycles can accompany MBOX replay traps */
-		if (evtype[idx0] == EV67_CYCLES) {
-			config = EV67_PCTR_CYCLES_MBOX;
-			goto success;
-		}
-	}
-
-	if (evtype[0] == EV67_BCACHEMISS || evtype[1] == EV67_BCACHEMISS) {
-		/* Bcache misses must be on PMC 1 */
-		idx0 = (evtype[0] == EV67_BCACHEMISS) ? 1 : 0;
-		/* Only instructions can accompany Bcache misses */
-		if (evtype[idx0] == EV67_INSTRUCTIONS) {
-			config = EV67_PCTR_INSTR_BCACHEMISS;
-			goto success;
-		}
-	}
-
-	if (evtype[0] == EV67_INSTRUCTIONS || evtype[1] == EV67_INSTRUCTIONS) {
-		/* Instructions must be on PMC 0 */
-		idx0 = (evtype[0] == EV67_INSTRUCTIONS) ? 0 : 1;
-		/* By this point only cycles can accompany instructions */
-		if (evtype[idx0^1] == EV67_CYCLES) {
-			config = EV67_PCTR_INSTR_CYCLES;
-			goto success;
-		}
-	}
-
-	/* Otherwise, darn it, there is a conflict.  */
-	return -1;
-
-success:
-	event[0]->hw.idx = idx0;
-	event[0]->hw.config_base = config;
-	if (n_ev == 2) {
-		event[1]->hw.idx = idx0 ^ 1;
-		event[1]->hw.config_base = config;
-	}
-	return 0;
-}
-
-
-static const struct alpha_pmu_t ev67_pmu = {
-	.event_map = ev67_perfmon_event_map,
-	.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
-	.num_pmcs = 2,
-	.pmc_count_shift = {EV67_PCTR_0_COUNT_SHIFT, EV67_PCTR_1_COUNT_SHIFT, 0},
-	.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK,  EV67_PCTR_1_COUNT_MASK,  0},
-	.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
-	.pmc_left = {16, 4, 0},
-	.check_constraints = ev67_check_constraints
-};
-
-
-
-/*
- * Helper routines to ensure that we read/write only the correct PMC bits
- * when calling the wrperfmon PALcall.
- */
-static inline void alpha_write_pmc(int idx, unsigned long val)
-{
-	val &= alpha_pmu->pmc_count_mask[idx];
-	val <<= alpha_pmu->pmc_count_shift[idx];
-	val |= (1<<idx);
-	wrperfmon(PERFMON_CMD_WRITE, val);
-}
-
-static inline unsigned long alpha_read_pmc(int idx)
-{
-	unsigned long val;
-
-	val = wrperfmon(PERFMON_CMD_READ, 0);
-	val >>= alpha_pmu->pmc_count_shift[idx];
-	val &= alpha_pmu->pmc_count_mask[idx];
-	return val;
-}
-
-/* Set a new period to sample over */
-static int alpha_perf_event_set_period(struct perf_event *event,
-				struct hw_perf_event *hwc, int idx)
-{
-	long left = local64_read(&hwc->period_left);
-	long period = hwc->sample_period;
-	int ret = 0;
-
-	if (unlikely(left <= -period)) {
-		left = period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	/*
-	 * Hardware restrictions require that the counters must not be
-	 * written with values that are too close to the maximum period.
-	 */
-	if (unlikely(left < alpha_pmu->pmc_left[idx]))
-		left = alpha_pmu->pmc_left[idx];
-
-	if (left > (long)alpha_pmu->pmc_max_period[idx])
-		left = alpha_pmu->pmc_max_period[idx];
-
-	local64_set(&hwc->prev_count, (unsigned long)(-left));
-
-	alpha_write_pmc(idx, (unsigned long)(-left));
-
-	perf_event_update_userpage(event);
-
-	return ret;
-}
-
-
-/*
- * Calculates the count (the 'delta') since the last time the PMC was read.
- *
- * As the PMCs' full period can easily be exceeded within the perf system
- * sampling period we cannot use any high order bits as a guard bit in the
- * PMCs to detect overflow as is done by other architectures.  The code here
- * calculates the delta on the basis that there is no overflow when ovf is
- * zero.  The value passed via ovf by the interrupt handler corrects for
- * overflow.
- *
- * This can be racey on rare occasions -- a call to this routine can occur
- * with an overflowed counter just before the PMI service routine is called.
- * The check for delta negative hopefully always rectifies this situation.
- */
-static unsigned long alpha_perf_event_update(struct perf_event *event,
-					struct hw_perf_event *hwc, int idx, long ovf)
-{
-	long prev_raw_count, new_raw_count;
-	long delta;
-
-again:
-	prev_raw_count = local64_read(&hwc->prev_count);
-	new_raw_count = alpha_read_pmc(idx);
-
-	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			     new_raw_count) != prev_raw_count)
-		goto again;
-
-	delta = (new_raw_count - (prev_raw_count & alpha_pmu->pmc_count_mask[idx])) + ovf;
-
-	/* It is possible on very rare occasions that the PMC has overflowed
-	 * but the interrupt is yet to come.  Detect and fix this situation.
-	 */
-	if (unlikely(delta < 0)) {
-		delta += alpha_pmu->pmc_max_period[idx] + 1;
-	}
-
-	local64_add(delta, &event->count);
-	local64_sub(delta, &hwc->period_left);
-
-	return new_raw_count;
-}
-
-
-/*
- * Collect all HW events into the array event[].
- */
-static int collect_events(struct perf_event *group, int max_count,
-			  struct perf_event *event[], unsigned long *evtype,
-			  int *current_idx)
-{
-	struct perf_event *pe;
-	int n = 0;
-
-	if (!is_software_event(group)) {
-		if (n >= max_count)
-			return -1;
-		event[n] = group;
-		evtype[n] = group->hw.event_base;
-		current_idx[n++] = PMC_NO_INDEX;
-	}
-	list_for_each_entry(pe, &group->sibling_list, group_entry) {
-		if (!is_software_event(pe) && pe->state != PERF_EVENT_STATE_OFF) {
-			if (n >= max_count)
-				return -1;
-			event[n] = pe;
-			evtype[n] = pe->hw.event_base;
-			current_idx[n++] = PMC_NO_INDEX;
-		}
-	}
-	return n;
-}
-
-
-
-/*
- * Check that a group of events can be simultaneously scheduled on to the PMU.
- */
-static int alpha_check_constraints(struct perf_event **events,
-				   unsigned long *evtypes, int n_ev)
-{
-
-	/* No HW events is possible from hw_perf_group_sched_in(). */
-	if (n_ev == 0)
-		return 0;
-
-	if (n_ev > alpha_pmu->num_pmcs)
-		return -1;
-
-	return alpha_pmu->check_constraints(events, evtypes, n_ev);
-}
-
-
-/*
- * If new events have been scheduled then update cpuc with the new
- * configuration.  This may involve shifting cycle counts from one PMC to
- * another.
- */
-static void maybe_change_configuration(struct cpu_hw_events *cpuc)
-{
-	int j;
-
-	if (cpuc->n_added == 0)
-		return;
-
-	/* Find counters that are moving to another PMC and update */
-	for (j = 0; j < cpuc->n_events; j++) {
-		struct perf_event *pe = cpuc->event[j];
-
-		if (cpuc->current_idx[j] != PMC_NO_INDEX &&
-			cpuc->current_idx[j] != pe->hw.idx) {
-			alpha_perf_event_update(pe, &pe->hw, cpuc->current_idx[j], 0);
-			cpuc->current_idx[j] = PMC_NO_INDEX;
-		}
-	}
-
-	/* Assign to counters all unassigned events. */
-	cpuc->idx_mask = 0;
-	for (j = 0; j < cpuc->n_events; j++) {
-		struct perf_event *pe = cpuc->event[j];
-		struct hw_perf_event *hwc = &pe->hw;
-		int idx = hwc->idx;
-
-		if (cpuc->current_idx[j] == PMC_NO_INDEX) {
-			alpha_perf_event_set_period(pe, hwc, idx);
-			cpuc->current_idx[j] = idx;
-		}
-
-		if (!(hwc->state & PERF_HES_STOPPED))
-			cpuc->idx_mask |= (1<<cpuc->current_idx[j]);
-	}
-	cpuc->config = cpuc->event[0]->hw.config_base;
-}
-
-
-
-/* Schedule perf HW event on to PMU.
- *  - this function is called from outside this module via the pmu struct
- *    returned from perf event initialisation.
- */
-static int alpha_pmu_add(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int n0;
-	int ret;
-	unsigned long irq_flags;
-
-	/*
-	 * The Sparc code has the IRQ disable first followed by the perf
-	 * disable, however this can lead to an overflowed counter with the
-	 * PMI disabled on rare occasions.  The alpha_perf_event_update()
-	 * routine should detect this situation by noting a negative delta,
-	 * nevertheless we disable the PMCs first to enable a potential
-	 * final PMI to occur before we disable interrupts.
-	 */
-	perf_pmu_disable(event->pmu);
-	local_irq_save(irq_flags);
-
-	/* Default to error to be returned */
-	ret = -EAGAIN;
-
-	/* Insert event on to PMU and if successful modify ret to valid return */
-	n0 = cpuc->n_events;
-	if (n0 < alpha_pmu->num_pmcs) {
-		cpuc->event[n0] = event;
-		cpuc->evtype[n0] = event->hw.event_base;
-		cpuc->current_idx[n0] = PMC_NO_INDEX;
-
-		if (!alpha_check_constraints(cpuc->event, cpuc->evtype, n0+1)) {
-			cpuc->n_events++;
-			cpuc->n_added++;
-			ret = 0;
-		}
-	}
-
-	hwc->state = PERF_HES_UPTODATE;
-	if (!(flags & PERF_EF_START))
-		hwc->state |= PERF_HES_STOPPED;
-
-	local_irq_restore(irq_flags);
-	perf_pmu_enable(event->pmu);
-
-	return ret;
-}
-
-
-
-/* Disable performance monitoring unit
- *  - this function is called from outside this module via the pmu struct
- *    returned from perf event initialisation.
- */
-static void alpha_pmu_del(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned long irq_flags;
-	int j;
-
-	perf_pmu_disable(event->pmu);
-	local_irq_save(irq_flags);
-
-	for (j = 0; j < cpuc->n_events; j++) {
-		if (event == cpuc->event[j]) {
-			int idx = cpuc->current_idx[j];
-
-			/* Shift remaining entries down into the existing
-			 * slot.
-			 */
-			while (++j < cpuc->n_events) {
-				cpuc->event[j - 1] = cpuc->event[j];
-				cpuc->evtype[j - 1] = cpuc->evtype[j];
-				cpuc->current_idx[j - 1] =
-					cpuc->current_idx[j];
-			}
-
-			/* Absorb the final count and turn off the event. */
-			alpha_perf_event_update(event, hwc, idx, 0);
-			perf_event_update_userpage(event);
-
-			cpuc->idx_mask &= ~(1UL<<idx);
-			cpuc->n_events--;
-			break;
-		}
-	}
-
-	local_irq_restore(irq_flags);
-	perf_pmu_enable(event->pmu);
-}
-
-
-static void alpha_pmu_read(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	alpha_perf_event_update(event, hwc, hwc->idx, 0);
-}
-
-
-static void alpha_pmu_stop(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-	if (!(hwc->state & PERF_HES_STOPPED)) {
-		cpuc->idx_mask &= ~(1UL<<hwc->idx);
-		hwc->state |= PERF_HES_STOPPED;
-	}
-
-	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
-		alpha_perf_event_update(event, hwc, hwc->idx, 0);
-		hwc->state |= PERF_HES_UPTODATE;
-	}
-
-	if (cpuc->enabled)
-		wrperfmon(PERFMON_CMD_DISABLE, (1UL<<hwc->idx));
-}
-
-
-static void alpha_pmu_start(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-	if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
-		return;
-
-	if (flags & PERF_EF_RELOAD) {
-		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-		alpha_perf_event_set_period(event, hwc, hwc->idx);
-	}
-
-	hwc->state = 0;
-
-	cpuc->idx_mask |= 1UL<<hwc->idx;
-	if (cpuc->enabled)
-		wrperfmon(PERFMON_CMD_ENABLE, (1UL<<hwc->idx));
-}
-
-
-/*
- * Check that CPU performance counters are supported.
- * - currently support EV67 and later CPUs.
- * - actually some later revisions of the EV6 have the same PMC model as the
- *     EV67 but we don't do suffiently deep CPU detection to detect them.
- *     Bad luck to the very few people who might have one, I guess.
- */
-static int supported_cpu(void)
-{
-	struct percpu_struct *cpu;
-	unsigned long cputype;
-
-	/* Get cpu type from HW */
-	cpu = (struct percpu_struct *)((char *)hwrpb + hwrpb->processor_offset);
-	cputype = cpu->type & 0xffffffff;
-	/* Include all of EV67, EV68, EV7, EV79 and EV69 as supported. */
-	return (cputype >= EV67_CPU) && (cputype <= EV69_CPU);
-}
-
-
-
-static void hw_perf_event_destroy(struct perf_event *event)
-{
-	/* Nothing to be done! */
-	return;
-}
-
-
-
-static int __hw_perf_event_init(struct perf_event *event)
-{
-	struct perf_event_attr *attr = &event->attr;
-	struct hw_perf_event *hwc = &event->hw;
-	struct perf_event *evts[MAX_HWEVENTS];
-	unsigned long evtypes[MAX_HWEVENTS];
-	int idx_rubbish_bin[MAX_HWEVENTS];
-	int ev;
-	int n;
-
-	/* We only support a limited range of HARDWARE event types with one
-	 * only programmable via a RAW event type.
-	 */
-	if (attr->type == PERF_TYPE_HARDWARE) {
-		if (attr->config >= alpha_pmu->max_events)
-			return -EINVAL;
-		ev = alpha_pmu->event_map[attr->config];
-	} else if (attr->type == PERF_TYPE_HW_CACHE) {
-		return -EOPNOTSUPP;
-	} else if (attr->type == PERF_TYPE_RAW) {
-		ev = attr->config & 0xff;
-	} else {
-		return -EOPNOTSUPP;
-	}
-
-	if (ev < 0) {
-		return ev;
-	}
-
-	/* The EV67 does not support mode exclusion */
-	if (attr->exclude_kernel || attr->exclude_user
-			|| attr->exclude_hv || attr->exclude_idle) {
-		return -EPERM;
-	}
-
-	/*
-	 * We place the event type in event_base here and leave calculation
-	 * of the codes to programme the PMU for alpha_pmu_enable() because
-	 * it is only then we will know what HW events are actually
-	 * scheduled on to the PMU.  At that point the code to programme the
-	 * PMU is put into config_base and the PMC to use is placed into
-	 * idx.  We initialise idx (below) to PMC_NO_INDEX to indicate that
-	 * it is yet to be determined.
-	 */
-	hwc->event_base = ev;
-
-	/* Collect events in a group together suitable for calling
-	 * alpha_check_constraints() to verify that the group as a whole can
-	 * be scheduled on to the PMU.
-	 */
-	n = 0;
-	if (event->group_leader != event) {
-		n = collect_events(event->group_leader,
-				alpha_pmu->num_pmcs - 1,
-				evts, evtypes, idx_rubbish_bin);
-		if (n < 0)
-			return -EINVAL;
-	}
-	evtypes[n] = hwc->event_base;
-	evts[n] = event;
-
-	if (alpha_check_constraints(evts, evtypes, n + 1))
-		return -EINVAL;
-
-	/* Indicate that PMU config and idx are yet to be determined. */
-	hwc->config_base = 0;
-	hwc->idx = PMC_NO_INDEX;
-
-	event->destroy = hw_perf_event_destroy;
-
-	/*
-	 * Most architectures reserve the PMU for their use at this point.
-	 * As there is no existing mechanism to arbitrate usage and there
-	 * appears to be no other user of the Alpha PMU we just assume
-	 * that we can just use it, hence a NO-OP here.
-	 *
-	 * Maybe an alpha_reserve_pmu() routine should be implemented but is
-	 * anything else ever going to use it?
-	 */
-
-	if (!hwc->sample_period) {
-		hwc->sample_period = alpha_pmu->pmc_max_period[0];
-		hwc->last_period = hwc->sample_period;
-		local64_set(&hwc->period_left, hwc->sample_period);
-	}
-
-	return 0;
-}
-
-/*
- * Main entry point to initialise a HW performance event.
- */
-static int alpha_pmu_event_init(struct perf_event *event)
-{
-	int err;
-
-	/* does not support taken branch sampling */
-	if (has_branch_stack(event))
-		return -EOPNOTSUPP;
-
-	switch (event->attr.type) {
-	case PERF_TYPE_RAW:
-	case PERF_TYPE_HARDWARE:
-	case PERF_TYPE_HW_CACHE:
-		break;
-
-	default:
-		return -ENOENT;
-	}
-
-	if (!alpha_pmu)
-		return -ENODEV;
-
-	/* Do the real initialisation work. */
-	err = __hw_perf_event_init(event);
-
-	return err;
-}
-
-/*
- * Main entry point - enable HW performance counters.
- */
-static void alpha_pmu_enable(struct pmu *pmu)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	if (cpuc->n_events > 0) {
-		/* Update cpuc with information from any new scheduled events. */
-		maybe_change_configuration(cpuc);
-
-		/* Start counting the desired events. */
-		wrperfmon(PERFMON_CMD_LOGGING_OPTIONS, EV67_PCTR_MODE_AGGREGATE);
-		wrperfmon(PERFMON_CMD_DESIRED_EVENTS, cpuc->config);
-		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
-	}
-}
-
-
-/*
- * Main entry point - disable HW performance counters.
- */
-
-static void alpha_pmu_disable(struct pmu *pmu)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-	cpuc->n_added = 0;
-
-	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
-}
-
-static struct pmu pmu = {
-	.pmu_enable	= alpha_pmu_enable,
-	.pmu_disable	= alpha_pmu_disable,
-	.event_init	= alpha_pmu_event_init,
-	.add		= alpha_pmu_add,
-	.del		= alpha_pmu_del,
-	.start		= alpha_pmu_start,
-	.stop		= alpha_pmu_stop,
-	.read		= alpha_pmu_read,
-};
-
-
-/*
- * Main entry point - don't know when this is called but it
- * obviously dumps debug info.
- */
-void perf_event_print_debug(void)
-{
-	unsigned long flags;
-	unsigned long pcr;
-	int pcr0, pcr1;
-	int cpu;
-
-	if (!supported_cpu())
-		return;
-
-	local_irq_save(flags);
-
-	cpu = smp_processor_id();
-
-	pcr = wrperfmon(PERFMON_CMD_READ, 0);
-	pcr0 = (pcr >> alpha_pmu->pmc_count_shift[0]) & alpha_pmu->pmc_count_mask[0];
-	pcr1 = (pcr >> alpha_pmu->pmc_count_shift[1]) & alpha_pmu->pmc_count_mask[1];
-
-	pr_info("CPU#%d: PCTR0[%06x] PCTR1[%06x]\n", cpu, pcr0, pcr1);
-
-	local_irq_restore(flags);
-}
-
-
-/*
- * Performance Monitoring Interrupt Service Routine called when a PMC
- * overflows.  The PMC that overflowed is passed in la_ptr.
- */
-static void alpha_perf_event_irq_handler(unsigned long la_ptr,
-					struct pt_regs *regs)
-{
-	struct cpu_hw_events *cpuc;
-	struct perf_sample_data data;
-	struct perf_event *event;
-	struct hw_perf_event *hwc;
-	int idx, j;
-
-	__get_cpu_var(irq_pmi_count)++;
-	cpuc = &__get_cpu_var(cpu_hw_events);
-
-	/* Completely counting through the PMC's period to trigger a new PMC
-	 * overflow interrupt while in this interrupt routine is utterly
-	 * disastrous!  The EV6 and EV67 counters are sufficiently large to
-	 * prevent this but to be really sure disable the PMCs.
-	 */
-	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
-
-	/* la_ptr is the counter that overflowed. */
-	if (unlikely(la_ptr >= alpha_pmu->num_pmcs)) {
-		/* This should never occur! */
-		irq_err_count++;
-		pr_warning("PMI: silly index %ld\n", la_ptr);
-		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
-		return;
-	}
-
-	idx = la_ptr;
-
-	perf_sample_data_init(&data, 0);
-	for (j = 0; j < cpuc->n_events; j++) {
-		if (cpuc->current_idx[j] == idx)
-			break;
-	}
-
-	if (unlikely(j == cpuc->n_events)) {
-		/* This can occur if the event is disabled right on a PMC overflow. */
-		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
-		return;
-	}
-
-	event = cpuc->event[j];
-
-	if (unlikely(!event)) {
-		/* This should never occur! */
-		irq_err_count++;
-		pr_warning("PMI: No event at index %d!\n", idx);
-		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
-		return;
-	}
-
-	hwc = &event->hw;
-	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
-	data.period = event->hw.last_period;
-
-	if (alpha_perf_event_set_period(event, hwc, idx)) {
-		if (perf_event_overflow(event, &data, regs)) {
-			/* Interrupts coming too quickly; "throttle" the
-			 * counter, i.e., disable it for a little while.
-			 */
-			alpha_pmu_stop(event, 0);
-		}
-	}
-	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
-
-	return;
-}
-
-
-
-/*
- * Init call to initialise performance events at kernel startup.
- */
-int __init init_hw_perf_events(void)
-{
-	pr_info("Performance events: ");
-
-	if (!supported_cpu()) {
-		pr_cont("No support for your CPU.\n");
-		return 0;
-	}
-
-	pr_cont("Supported CPU type!\n");
-
-	/* Override performance counter IRQ vector */
-
-	perf_irq = alpha_perf_event_irq_handler;
-
-	/* And set up PMU specification */
-	alpha_pmu = &ev67_pmu;
-
-	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-
-	return 0;
-}
-early_initcall(init_hw_perf_events);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/process.c b/ANDROID_3.4.5/arch/alpha/kernel/process.c
deleted file mode 100644
index 153d3fce..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/process.c
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/process.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/time.h>
-#include <linux/major.h>
-#include <linux/stat.h>
-#include <linux/vt.h>
-#include <linux/mman.h>
-#include <linux/elfcore.h>
-#include <linux/reboot.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/slab.h>
-
-#include <asm/reg.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/hwrpb.h>
-#include <asm/fpu.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
-void
-cpu_idle(void)
-{
-	set_thread_flag(TIF_POLLING_NRFLAG);
-
-	while (1) {
-		/* FIXME -- EV6 and LCA45 know how to power down
-		   the CPU.  */
-
-		while (!need_resched())
-			cpu_relax();
-		schedule();
-	}
-}
-
-
-struct halt_info {
-	int mode;
-	char *restart_cmd;
-};
-
-static void
-common_shutdown_1(void *generic_ptr)
-{
-	struct halt_info *how = (struct halt_info *)generic_ptr;
-	struct percpu_struct *cpup;
-	unsigned long *pflags, flags;
-	int cpuid = smp_processor_id();
-
-	/* No point in taking interrupts anymore. */
-	local_irq_disable();
-
-	cpup = (struct percpu_struct *)
-			((unsigned long)hwrpb + hwrpb->processor_offset
-			 + hwrpb->processor_size * cpuid);
-	pflags = &cpup->flags;
-	flags = *pflags;
-
-	/* Clear reason to "default"; clear "bootstrap in progress". */
-	flags &= ~0x00ff0001UL;
-
-#ifdef CONFIG_SMP
-	/* Secondaries halt here. */
-	if (cpuid != boot_cpuid) {
-		flags |= 0x00040000UL; /* "remain halted" */
-		*pflags = flags;
-		set_cpu_present(cpuid, false);
-		set_cpu_possible(cpuid, false);
-		halt();
-	}
-#endif
-
-	if (how->mode == LINUX_REBOOT_CMD_RESTART) {
-		if (!how->restart_cmd) {
-			flags |= 0x00020000UL; /* "cold bootstrap" */
-		} else {
-			/* For SRM, we could probably set environment
-			   variables to get this to work.  We'd have to
-			   delay this until after srm_paging_stop unless
-			   we ever got srm_fixup working.
-
-			   At the moment, SRM will use the last boot device,
-			   but the file and flags will be the defaults, when
-			   doing a "warm" bootstrap.  */
-			flags |= 0x00030000UL; /* "warm bootstrap" */
-		}
-	} else {
-		flags |= 0x00040000UL; /* "remain halted" */
-	}
-	*pflags = flags;
-
-#ifdef CONFIG_SMP
-	/* Wait for the secondaries to halt. */
-	set_cpu_present(boot_cpuid, false);
-	set_cpu_possible(boot_cpuid, false);
-	while (cpumask_weight(cpu_present_mask))
-		barrier();
-#endif
-
-	/* If booted from SRM, reset some of the original environment. */
-	if (alpha_using_srm) {
-#ifdef CONFIG_DUMMY_CONSOLE
-		/* If we've gotten here after SysRq-b, leave interrupt
-		   context before taking over the console. */
-		if (in_interrupt())
-			irq_exit();
-		/* This has the effect of resetting the VGA video origin.  */
-		take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
-#endif
-		pci_restore_srm_config();
-		set_hae(srm_hae);
-	}
-
-	if (alpha_mv.kill_arch)
-		alpha_mv.kill_arch(how->mode);
-
-	if (! alpha_using_srm && how->mode != LINUX_REBOOT_CMD_RESTART) {
-		/* Unfortunately, since MILO doesn't currently understand
-		   the hwrpb bits above, we can't reliably halt the 
-		   processor and keep it halted.  So just loop.  */
-		return;
-	}
-
-	if (alpha_using_srm)
-		srm_paging_stop();
-
-	halt();
-}
-
-static void
-common_shutdown(int mode, char *restart_cmd)
-{
-	struct halt_info args;
-	args.mode = mode;
-	args.restart_cmd = restart_cmd;
-	on_each_cpu(common_shutdown_1, &args, 0);
-}
-
-void
-machine_restart(char *restart_cmd)
-{
-	common_shutdown(LINUX_REBOOT_CMD_RESTART, restart_cmd);
-}
-
-
-void
-machine_halt(void)
-{
-	common_shutdown(LINUX_REBOOT_CMD_HALT, NULL);
-}
-
-
-void
-machine_power_off(void)
-{
-	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
-}
-
-
-/* Used by sysrq-p, among others.  I don't believe r9-r15 are ever
-   saved in the context it's used.  */
-
-void
-show_regs(struct pt_regs *regs)
-{
-	dik_show_regs(regs, NULL);
-}
-
-/*
- * Re-start a thread when doing execve()
- */
-void
-start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
-{
-	regs->pc = pc;
-	regs->ps = 8;
-	wrusp(sp);
-}
-EXPORT_SYMBOL(start_thread);
-
-/*
- * Free current thread data structures etc..
- */
-void
-exit_thread(void)
-{
-}
-
-void
-flush_thread(void)
-{
-	/* Arrange for each exec'ed process to start off with a clean slate
-	   with respect to the FPU.  This is all exceptions disabled.  */
-	current_thread_info()->ieee_state = 0;
-	wrfpcr(FPCR_DYN_NORMAL | ieee_swcr_to_fpcr(0));
-
-	/* Clean slate for TLS.  */
-	current_thread_info()->pcb.unique = 0;
-}
-
-void
-release_thread(struct task_struct *dead_task)
-{
-}
-
-/*
- * "alpha_clone()".. By the time we get here, the
- * non-volatile registers have also been saved on the
- * stack. We do some ugly pointer stuff here.. (see
- * also copy_thread)
- *
- * Notice that "fork()" is implemented in terms of clone,
- * with parameters (SIGCHLD, 0).
- */
-int
-alpha_clone(unsigned long clone_flags, unsigned long usp,
-	    int __user *parent_tid, int __user *child_tid,
-	    unsigned long tls_value, struct pt_regs *regs)
-{
-	if (!usp)
-		usp = rdusp();
-
-	return do_fork(clone_flags, usp, regs, 0, parent_tid, child_tid);
-}
-
-int
-alpha_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(),
-		       regs, 0, NULL, NULL);
-}
-
-/*
- * Copy an alpha thread..
- *
- * Note the "stack_offset" stuff: when returning to kernel mode, we need
- * to have some extra stack-space for the kernel stack that still exists
- * after the "ret_from_fork".  When returning to user mode, we only want
- * the space needed by the syscall stack frame (ie "struct pt_regs").
- * Use the passed "regs" pointer to determine how much space we need
- * for a kernel fork().
- */
-
-int
-copy_thread(unsigned long clone_flags, unsigned long usp,
-	    unsigned long unused,
-	    struct task_struct * p, struct pt_regs * regs)
-{
-	extern void ret_from_fork(void);
-
-	struct thread_info *childti = task_thread_info(p);
-	struct pt_regs * childregs;
-	struct switch_stack * childstack, *stack;
-	unsigned long stack_offset, settls;
-
-	stack_offset = PAGE_SIZE - sizeof(struct pt_regs);
-	if (!(regs->ps & 8))
-		stack_offset = (PAGE_SIZE-1) & (unsigned long) regs;
-	childregs = (struct pt_regs *)
-	  (stack_offset + PAGE_SIZE + task_stack_page(p));
-		
-	*childregs = *regs;
-	settls = regs->r20;
-	childregs->r0 = 0;
-	childregs->r19 = 0;
-	childregs->r20 = 1;	/* OSF/1 has some strange fork() semantics.  */
-	regs->r20 = 0;
-	stack = ((struct switch_stack *) regs) - 1;
-	childstack = ((struct switch_stack *) childregs) - 1;
-	*childstack = *stack;
-	childstack->r26 = (unsigned long) ret_from_fork;
-	childti->pcb.usp = usp;
-	childti->pcb.ksp = (unsigned long) childstack;
-	childti->pcb.flags = 1;	/* set FEN, clear everything else */
-
-	/* Set a new TLS for the child thread?  Peek back into the
-	   syscall arguments that we saved on syscall entry.  Oops,
-	   except we'd have clobbered it with the parent/child set
-	   of r20.  Read the saved copy.  */
-	/* Note: if CLONE_SETTLS is not set, then we must inherit the
-	   value from the parent, which will have been set by the block
-	   copy in dup_task_struct.  This is non-intuitive, but is
-	   required for proper operation in the case of a threaded
-	   application calling fork.  */
-	if (clone_flags & CLONE_SETTLS)
-		childti->pcb.unique = settls;
-
-	return 0;
-}
-
-/*
- * Fill in the user structure for a ELF core dump.
- */
-void
-dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
-{
-	/* switch stack follows right below pt_regs: */
-	struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
-
-	dest[ 0] = pt->r0;
-	dest[ 1] = pt->r1;
-	dest[ 2] = pt->r2;
-	dest[ 3] = pt->r3;
-	dest[ 4] = pt->r4;
-	dest[ 5] = pt->r5;
-	dest[ 6] = pt->r6;
-	dest[ 7] = pt->r7;
-	dest[ 8] = pt->r8;
-	dest[ 9] = sw->r9;
-	dest[10] = sw->r10;
-	dest[11] = sw->r11;
-	dest[12] = sw->r12;
-	dest[13] = sw->r13;
-	dest[14] = sw->r14;
-	dest[15] = sw->r15;
-	dest[16] = pt->r16;
-	dest[17] = pt->r17;
-	dest[18] = pt->r18;
-	dest[19] = pt->r19;
-	dest[20] = pt->r20;
-	dest[21] = pt->r21;
-	dest[22] = pt->r22;
-	dest[23] = pt->r23;
-	dest[24] = pt->r24;
-	dest[25] = pt->r25;
-	dest[26] = pt->r26;
-	dest[27] = pt->r27;
-	dest[28] = pt->r28;
-	dest[29] = pt->gp;
-	dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
-	dest[31] = pt->pc;
-
-	/* Once upon a time this was the PS value.  Which is stupid
-	   since that is always 8 for usermode.  Usurped for the more
-	   useful value of the thread's UNIQUE field.  */
-	dest[32] = ti->pcb.unique;
-}
-EXPORT_SYMBOL(dump_elf_thread);
-
-int
-dump_elf_task(elf_greg_t *dest, struct task_struct *task)
-{
-	dump_elf_thread(dest, task_pt_regs(task), task_thread_info(task));
-	return 1;
-}
-EXPORT_SYMBOL(dump_elf_task);
-
-int
-dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
-{
-	struct switch_stack *sw = (struct switch_stack *)task_pt_regs(task) - 1;
-	memcpy(dest, sw->fp, 32 * 8);
-	return 1;
-}
-EXPORT_SYMBOL(dump_elf_task_fp);
-
-/*
- * sys_execve() executes a new program.
- */
-asmlinkage int
-do_sys_execve(const char __user *ufilename,
-	      const char __user *const __user *argv,
-	      const char __user *const __user *envp, struct pt_regs *regs)
-{
-	int error;
-	char *filename;
-
-	filename = getname(ufilename);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		goto out;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-out:
-	return error;
-}
-
-/*
- * Return saved PC of a blocked thread.  This assumes the frame
- * pointer is the 6th saved long on the kernel stack and that the
- * saved return address is the first long in the frame.  This all
- * holds provided the thread blocked through a call to schedule() ($15
- * is the frame pointer in schedule() and $15 is saved at offset 48 by
- * entry.S:do_switch_stack).
- *
- * Under heavy swap load I've seen this lose in an ugly way.  So do
- * some extra sanity checking on the ranges we expect these pointers
- * to be in so that we can fail gracefully.  This is just for ps after
- * all.  -- r~
- */
-
-unsigned long
-thread_saved_pc(struct task_struct *t)
-{
-	unsigned long base = (unsigned long)task_stack_page(t);
-	unsigned long fp, sp = task_thread_info(t)->pcb.ksp;
-
-	if (sp > base && sp+6*8 < base + 16*1024) {
-		fp = ((unsigned long*)sp)[6];
-		if (fp > sp && fp < base + 16*1024)
-			return *(unsigned long *)fp;
-	}
-
-	return 0;
-}
-
-unsigned long
-get_wchan(struct task_struct *p)
-{
-	unsigned long schedule_frame;
-	unsigned long pc;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-	/*
-	 * This one depends on the frame size of schedule().  Do a
-	 * "disass schedule" in gdb to find the frame size.  Also, the
-	 * code assumes that sleep_on() follows immediately after
-	 * interruptible_sleep_on() and that add_timer() follows
-	 * immediately after interruptible_sleep().  Ugly, isn't it?
-	 * Maybe adding a wchan field to task_struct would be better,
-	 * after all...
-	 */
-
-	pc = thread_saved_pc(p);
-	if (in_sched_functions(pc)) {
-		schedule_frame = ((unsigned long *)task_thread_info(p)->pcb.ksp)[6];
-		return ((unsigned long *)schedule_frame)[12];
-	}
-	return pc;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/proto.h b/ANDROID_3.4.5/arch/alpha/kernel/proto.h
deleted file mode 100644
index d3e52d3f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/proto.h
+++ /dev/null
@@ -1,224 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/pgtable.h>
-
-/* Prototypes of functions used across modules here in this directory.  */
-
-#define vucp	volatile unsigned char  *
-#define vusp	volatile unsigned short *
-#define vip	volatile int *
-#define vuip	volatile unsigned int   *
-#define vulp	volatile unsigned long  *
-
-struct pt_regs;
-struct task_struct;
-struct pci_dev;
-struct pci_controller;
-
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
-/* core_cia.c */
-extern struct pci_ops cia_pci_ops;
-extern void cia_init_pci(void);
-extern void cia_init_arch(void);
-extern void pyxis_init_arch(void);
-extern void cia_kill_arch(int);
-extern void cia_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
-/* core_irongate.c */
-extern struct pci_ops irongate_pci_ops;
-extern int irongate_pci_clr_err(void);
-extern void irongate_init_arch(void);
-#define irongate_pci_tbi ((void *)0)
-
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
-/* core_marvel.c */
-extern struct pci_ops marvel_pci_ops;
-extern void marvel_init_arch(void);
-extern void marvel_kill_arch(int);
-extern void marvel_machine_check(unsigned long, unsigned long);
-extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern int marvel_pa_to_nid(unsigned long);
-extern int marvel_cpuid_to_nid(int);
-extern unsigned long marvel_node_mem_start(int);
-extern unsigned long marvel_node_mem_size(int);
-extern struct _alpha_agp_info *marvel_agp_info(void);
-struct io7 *marvel_find_io7(int pe);
-struct io7 *marvel_next_io7(struct io7 *prev);
-void io7_clear_errors(struct io7 *io7);
-
-/* core_mcpcia.c */
-extern struct pci_ops mcpcia_pci_ops;
-extern void mcpcia_init_arch(void);
-extern void mcpcia_init_hoses(void);
-extern void mcpcia_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void mcpcia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
-/* core_polaris.c */
-extern struct pci_ops polaris_pci_ops;
-extern int polaris_read_config_dword(struct pci_dev *, int, u32 *);
-extern int polaris_write_config_dword(struct pci_dev *, int, u32);
-extern void polaris_init_arch(void);
-extern void polaris_machine_check(unsigned long vector, unsigned long la_ptr);
-#define polaris_pci_tbi ((void *)0)
-
-/* core_t2.c */
-extern struct pci_ops t2_pci_ops;
-extern void t2_init_arch(void);
-extern void t2_kill_arch(int);
-extern void t2_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
-/* core_titan.c */
-extern struct pci_ops titan_pci_ops;
-extern void titan_init_arch(void);
-extern void titan_kill_arch(int);
-extern void titan_machine_check(unsigned long, unsigned long);
-extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern struct _alpha_agp_info *titan_agp_info(void);
-
-/* core_tsunami.c */
-extern struct pci_ops tsunami_pci_ops;
-extern void tsunami_init_arch(void);
-extern void tsunami_kill_arch(int);
-extern void tsunami_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void tsunami_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
-/* core_wildfire.c */
-extern struct pci_ops wildfire_pci_ops;
-extern void wildfire_init_arch(void);
-extern void wildfire_kill_arch(int);
-extern void wildfire_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void wildfire_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern int wildfire_pa_to_nid(unsigned long);
-extern int wildfire_cpuid_to_nid(int);
-extern unsigned long wildfire_node_mem_start(int);
-extern unsigned long wildfire_node_mem_size(int);
-
-/* console.c */
-#ifdef CONFIG_VGA_HOSE
-extern void find_console_vga_hose(void);
-extern void locate_and_init_vga(void *(*)(void *, void *));
-#else
-static inline void find_console_vga_hose(void) { }
-static inline void locate_and_init_vga(void *(*sel_func)(void *, void *)) { }
-#endif
-
-/* setup.c */
-extern unsigned long srm_hae;
-extern int boot_cpuid;
-#ifdef CONFIG_VERBOSE_MCHECK
-extern unsigned long alpha_verbose_mcheck;
-#endif
-
-/* srmcons.c */
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
-extern void register_srm_console(void);
-extern void unregister_srm_console(void);
-#else
-#define register_srm_console()
-#define unregister_srm_console()
-#endif
-
-/* smp.c */
-extern void setup_smp(void);
-extern void handle_ipi(struct pt_regs *);
-extern void smp_percpu_timer_interrupt(struct pt_regs *);
-
-/* bios32.c */
-/* extern void reset_for_srm(void); */
-
-/* time.c */
-extern irqreturn_t timer_interrupt(int irq, void *dev);
-extern void common_init_rtc(void);
-extern unsigned long est_cycle_freq;
-extern unsigned int common_get_rtc_time(struct rtc_time *time);
-extern int common_set_rtc_time(struct rtc_time *time);
-
-/* smc37c93x.c */
-extern void SMC93x_Init(void);
-
-/* smc37c669.c */
-extern void SMC669_Init(int);
-
-/* es1888.c */
-extern void es1888_init(void);
-
-/* ../lib/fpreg.c */
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-
-/* head.S */
-extern void wrmces(unsigned long mces);
-extern void cserve_ena(unsigned long);
-extern void cserve_dis(unsigned long);
-extern void __smp_callin(unsigned long);
-
-/* entry.S */
-extern void entArith(void);
-extern void entIF(void);
-extern void entInt(void);
-extern void entMM(void);
-extern void entSys(void);
-extern void entUna(void);
-extern void entDbg(void);
-
-/* ptrace.c */
-extern int ptrace_set_bpt (struct task_struct *child);
-extern int ptrace_cancel_bpt (struct task_struct *child);
-
-/* traps.c */
-extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
-extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
-
-/* sys_titan.c */
-extern void titan_dispatch_irqs(u64);
-
-/* ../mm/init.c */
-extern void switch_to_system_map(void);
-extern void srm_paging_stop(void);
-
-static inline int
-__alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
-			 unsigned long size, unsigned long flags)
-{
-	pgprot_t prot;
-
-	prot = __pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE
-			| _PAGE_KWE | flags);
-	return ioremap_page_range(address, address + size, phys_addr, prot);
-}
-
-/* irq.c */
-
-#ifdef CONFIG_SMP
-#define mcheck_expected(cpu)	(cpu_data[cpu].mcheck_expected)
-#define mcheck_taken(cpu)	(cpu_data[cpu].mcheck_taken)
-#define mcheck_extra(cpu)	(cpu_data[cpu].mcheck_extra)
-#else
-extern struct mcheck_info
-{
-	unsigned char expected __attribute__((aligned(8)));
-	unsigned char taken;
-	unsigned char extra;
-} __mcheck_info;
-
-#define mcheck_expected(cpu)	(*((void)(cpu), &__mcheck_info.expected))
-#define mcheck_taken(cpu)	(*((void)(cpu), &__mcheck_info.taken))
-#define mcheck_extra(cpu)	(*((void)(cpu), &__mcheck_info.extra))
-#endif
-
-extern void process_mcheck_info(unsigned long vector, unsigned long la_ptr,
-				const char *machine, int expected);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/ptrace.c b/ANDROID_3.4.5/arch/alpha/kernel/ptrace.c
deleted file mode 100644
index 54616f49..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/ptrace.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/* ptrace.c */
-/* By Ross Biro 1/23/92 */
-/* edited by Linus Torvalds */
-/* mangled further by Bob Manson (manson@santafe.edu) */
-/* more mutilation by David Mosberger (davidm@azstarnet.com) */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/fpu.h>
-
-#include "proto.h"
-
-#define DEBUG	DBG_MEM
-#undef DEBUG
-
-#ifdef DEBUG
-enum {
-	DBG_MEM		= (1<<0),
-	DBG_BPT		= (1<<1),
-	DBG_MEM_ALL	= (1<<2)
-};
-#define DBG(fac,args)	{if ((fac) & DEBUG) printk args;}
-#else
-#define DBG(fac,args)
-#endif
-
-#define BREAKINST	0x00000080	/* call_pal bpt */
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * Processes always block with the following stack-layout:
- *
- *  +================================+ <---- task + 2*PAGE_SIZE
- *  | PALcode saved frame (ps, pc,   | ^
- *  | gp, a0, a1, a2)		     | |
- *  +================================+ | struct pt_regs
- *  |	        		     | |
- *  | frame generated by SAVE_ALL    | |
- *  |	        		     | v
- *  +================================+
- *  |	        		     | ^
- *  | frame saved by do_switch_stack | | struct switch_stack
- *  |	        		     | v
- *  +================================+
- */
-
-/* 
- * The following table maps a register index into the stack offset at
- * which the register is saved.  Register indices are 0-31 for integer
- * regs, 32-63 for fp regs, and 64 for the pc.  Notice that sp and
- * zero have no stack-slot and need to be treated specially (see
- * get_reg/put_reg below).
- */
-enum {
-	REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64
-};
-
-#define PT_REG(reg) \
-  (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg))
-
-#define SW_REG(reg) \
- (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
-  + offsetof(struct switch_stack, reg))
-
-static int regoff[] = {
-	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
-	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
-	PT_REG(	   r8), SW_REG(	   r9), SW_REG(	  r10), SW_REG(	 r11),
-	SW_REG(	  r12), SW_REG(	  r13), SW_REG(	  r14), SW_REG(	 r15),
-	PT_REG(	  r16), PT_REG(	  r17), PT_REG(	  r18), PT_REG(	 r19),
-	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
-	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
-	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
-	SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
-	SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
-	SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
-	SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
-	SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
-	SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
-	SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
-	SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
-	PT_REG(	   pc)
-};
-
-static unsigned long zero;
-
-/*
- * Get address of register REGNO in task TASK.
- */
-static unsigned long *
-get_reg_addr(struct task_struct * task, unsigned long regno)
-{
-	unsigned long *addr;
-
-	if (regno == 30) {
-		addr = &task_thread_info(task)->pcb.usp;
-	} else if (regno == 65) {
-		addr = &task_thread_info(task)->pcb.unique;
-	} else if (regno == 31 || regno > 65) {
-		zero = 0;
-		addr = &zero;
-	} else {
-		addr = task_stack_page(task) + regoff[regno];
-	}
-	return addr;
-}
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-static unsigned long
-get_reg(struct task_struct * task, unsigned long regno)
-{
-	/* Special hack for fpcr -- combine hardware and software bits.  */
-	if (regno == 63) {
-		unsigned long fpcr = *get_reg_addr(task, regno);
-		unsigned long swcr
-		  = task_thread_info(task)->ieee_state & IEEE_SW_MASK;
-		swcr = swcr_update_status(swcr, fpcr);
-		return fpcr | swcr;
-	}
-	return *get_reg_addr(task, regno);
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-static int
-put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
-{
-	if (regno == 63) {
-		task_thread_info(task)->ieee_state
-		  = ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK)
-		     | (data & IEEE_SW_MASK));
-		data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data);
-	}
-	*get_reg_addr(task, regno) = data;
-	return 0;
-}
-
-static inline int
-read_int(struct task_struct *task, unsigned long addr, int * data)
-{
-	int copied = access_process_vm(task, addr, data, sizeof(int), 0);
-	return (copied == sizeof(int)) ? 0 : -EIO;
-}
-
-static inline int
-write_int(struct task_struct *task, unsigned long addr, int data)
-{
-	int copied = access_process_vm(task, addr, &data, sizeof(int), 1);
-	return (copied == sizeof(int)) ? 0 : -EIO;
-}
-
-/*
- * Set breakpoint.
- */
-int
-ptrace_set_bpt(struct task_struct * child)
-{
-	int displ, i, res, reg_b, nsaved = 0;
-	unsigned int insn, op_code;
-	unsigned long pc;
-
-	pc  = get_reg(child, REG_PC);
-	res = read_int(child, pc, (int *) &insn);
-	if (res < 0)
-		return res;
-
-	op_code = insn >> 26;
-	if (op_code >= 0x30) {
-		/*
-		 * It's a branch: instead of trying to figure out
-		 * whether the branch will be taken or not, we'll put
-		 * a breakpoint at either location.  This is simpler,
-		 * more reliable, and probably not a whole lot slower
-		 * than the alternative approach of emulating the
-		 * branch (emulation can be tricky for fp branches).
-		 */
-		displ = ((s32)(insn << 11)) >> 9;
-		task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
-		if (displ)		/* guard against unoptimized code */
-			task_thread_info(child)->bpt_addr[nsaved++]
-			  = pc + 4 + displ;
-		DBG(DBG_BPT, ("execing branch\n"));
-	} else if (op_code == 0x1a) {
-		reg_b = (insn >> 16) & 0x1f;
-		task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b);
-		DBG(DBG_BPT, ("execing jump\n"));
-	} else {
-		task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
-		DBG(DBG_BPT, ("execing normal insn\n"));
-	}
-
-	/* install breakpoints: */
-	for (i = 0; i < nsaved; ++i) {
-		res = read_int(child, task_thread_info(child)->bpt_addr[i],
-			       (int *) &insn);
-		if (res < 0)
-			return res;
-		task_thread_info(child)->bpt_insn[i] = insn;
-		DBG(DBG_BPT, ("    -> next_pc=%lx\n",
-			      task_thread_info(child)->bpt_addr[i]));
-		res = write_int(child, task_thread_info(child)->bpt_addr[i],
-				BREAKINST);
-		if (res < 0)
-			return res;
-	}
-	task_thread_info(child)->bpt_nsaved = nsaved;
-	return 0;
-}
-
-/*
- * Ensure no single-step breakpoint is pending.  Returns non-zero
- * value if child was being single-stepped.
- */
-int
-ptrace_cancel_bpt(struct task_struct * child)
-{
-	int i, nsaved = task_thread_info(child)->bpt_nsaved;
-
-	task_thread_info(child)->bpt_nsaved = 0;
-
-	if (nsaved > 2) {
-		printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
-		nsaved = 2;
-	}
-
-	for (i = 0; i < nsaved; ++i) {
-		write_int(child, task_thread_info(child)->bpt_addr[i],
-			  task_thread_info(child)->bpt_insn[i]);
-	}
-	return (nsaved != 0);
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
-	/* Mark single stepping.  */
-	task_thread_info(child)->bpt_nsaved = -1;
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
-	ptrace_cancel_bpt(child);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
-void ptrace_disable(struct task_struct *child)
-{ 
-	user_disable_single_step(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	unsigned long tmp;
-	size_t copied;
-	long ret;
-
-	switch (request) {
-	/* When I and D space are separate, these will need to be fixed.  */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		
-		force_successful_syscall_return();
-		ret = tmp;
-		break;
-
-	/* Read register number ADDR. */
-	case PTRACE_PEEKUSR:
-		force_successful_syscall_return();
-		ret = get_reg(child, addr);
-		DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
-		break;
-
-	/* When I and D space are separate, this will have to be fixed.  */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
-	case PTRACE_POKEUSR: /* write the specified register */
-		DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
-		ret = put_reg(child, addr, data);
-		break;
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-	return ret;
-}
-
-asmlinkage void
-syscall_trace(void)
-{
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * This isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/setup.c b/ANDROID_3.4.5/arch/alpha/kernel/setup.c
deleted file mode 100644
index 9e3107cc..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/setup.c
+++ /dev/null
@@ -1,1514 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/setup.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/* 2.3.x bootmem, 1999 Andrea Arcangeli <andrea@suse.de> */
-
-/*
- * Bootup setup stuff.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/screen_info.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/console.h>
-#include <linux/cpu.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/bootmem.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/eisa.h>
-#include <linux/pfn.h>
-#ifdef CONFIG_MAGIC_SYSRQ
-#include <linux/sysrq.h>
-#include <linux/reboot.h>
-#endif
-#include <linux/notifier.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <linux/log2.h>
-#include <linux/export.h>
-
-extern struct atomic_notifier_head panic_notifier_list;
-static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
-static struct notifier_block alpha_panic_block = {
-	alpha_panic_event,
-        NULL,
-        INT_MAX /* try to do it first */
-};
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/hwrpb.h>
-#include <asm/dma.h>
-#include <asm/mmu_context.h>
-#include <asm/console.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-struct hwrpb_struct *hwrpb;
-EXPORT_SYMBOL(hwrpb);
-unsigned long srm_hae;
-
-int alpha_l1i_cacheshape;
-int alpha_l1d_cacheshape;
-int alpha_l2_cacheshape;
-int alpha_l3_cacheshape;
-
-#ifdef CONFIG_VERBOSE_MCHECK
-/* 0=minimum, 1=verbose, 2=all */
-/* These can be overridden via the command line, ie "verbose_mcheck=2") */
-unsigned long alpha_verbose_mcheck = CONFIG_VERBOSE_MCHECK_ON;
-#endif
-
-#ifdef CONFIG_NUMA
-struct cpumask node_to_cpumask_map[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_to_cpumask_map);
-#endif
-
-/* Which processor we booted from.  */
-int boot_cpuid;
-
-/*
- * Using SRM callbacks for initial console output. This works from
- * setup_arch() time through the end of time_init(), as those places
- * are under our (Alpha) control.
-
- * "srmcons" specified in the boot command arguments allows us to
- * see kernel messages during the period of time before the true
- * console device is "registered" during console_init(). 
- * As of this version (2.5.59), console_init() will call
- * disable_early_printk() as the last action before initializing
- * the console drivers. That's the last possible time srmcons can be 
- * unregistered without interfering with console behavior.
- *
- * By default, OFF; set it with a bootcommand arg of "srmcons" or 
- * "console=srm". The meaning of these two args is:
- *     "srmcons"     - early callback prints 
- *     "console=srm" - full callback based console, including early prints
- */
-int srmcons_output = 0;
-
-/* Enforce a memory size limit; useful for testing. By default, none. */
-unsigned long mem_size_limit = 0;
-
-/* Set AGP GART window size (0 means disabled). */
-unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
-
-#ifdef CONFIG_ALPHA_GENERIC
-struct alpha_machine_vector alpha_mv;
-int alpha_using_srm;
-EXPORT_SYMBOL(alpha_using_srm);
-#endif
-
-static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
-					       unsigned long);
-static struct alpha_machine_vector *get_sysvec_byname(const char *);
-static void get_sysnames(unsigned long, unsigned long, unsigned long,
-			 char **, char **);
-static void determine_cpu_caches (unsigned int);
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-/*
- * The format of "screen_info" is strange, and due to early
- * i386-setup code. This is just enough to make the console
- * code think we're on a VGA color display.
- */
-
-struct screen_info screen_info = {
-	.orig_x = 0,
-	.orig_y = 25,
-	.orig_video_cols = 80,
-	.orig_video_lines = 25,
-	.orig_video_isVGA = 1,
-	.orig_video_points = 16
-};
-
-EXPORT_SYMBOL(screen_info);
-
-/*
- * The direct map I/O window, if any.  This should be the same
- * for all busses, since it's used by virt_to_bus.
- */
-
-unsigned long __direct_map_base;
-unsigned long __direct_map_size;
-EXPORT_SYMBOL(__direct_map_base);
-EXPORT_SYMBOL(__direct_map_size);
-
-/*
- * Declare all of the machine vectors.
- */
-
-/* GCC 2.7.2 (on alpha at least) is lame.  It does not support either 
-   __attribute__((weak)) or #pragma weak.  Bypass it and talk directly
-   to the assembler.  */
-
-#define WEAK(X) \
-	extern struct alpha_machine_vector X; \
-	asm(".weak "#X)
-
-WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
-WEAK(clipper_mv);
-WEAK(dp264_mv);
-WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
-WEAK(eiger_mv);
-WEAK(jensen_mv);
-WEAK(lx164_mv);
-WEAK(lynx_mv);
-WEAK(marvel_ev7_mv);
-WEAK(miata_mv);
-WEAK(mikasa_mv);
-WEAK(mikasa_primo_mv);
-WEAK(monet_mv);
-WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
-WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
-WEAK(pc164_mv);
-WEAK(privateer_mv);
-WEAK(rawhide_mv);
-WEAK(ruffian_mv);
-WEAK(rx164_mv);
-WEAK(sable_mv);
-WEAK(sable_gamma_mv);
-WEAK(shark_mv);
-WEAK(sx164_mv);
-WEAK(takara_mv);
-WEAK(titan_mv);
-WEAK(webbrick_mv);
-WEAK(wildfire_mv);
-WEAK(xl_mv);
-WEAK(xlt_mv);
-
-#undef WEAK
-
-/*
- * I/O resources inherited from PeeCees.  Except for perhaps the
- * turbochannel alphas, everyone has these on some sort of SuperIO chip.
- *
- * ??? If this becomes less standard, move the struct out into the
- * machine vector.
- */
-
-static void __init
-reserve_std_resources(void)
-{
-	static struct resource standard_io_resources[] = {
-		{ .name = "rtc", .start = -1, .end = -1 },
-        	{ .name = "dma1", .start = 0x00, .end = 0x1f },
-        	{ .name = "pic1", .start = 0x20, .end = 0x3f },
-        	{ .name = "timer", .start = 0x40, .end = 0x5f },
-        	{ .name = "keyboard", .start = 0x60, .end = 0x6f },
-        	{ .name = "dma page reg", .start = 0x80, .end = 0x8f },
-        	{ .name = "pic2", .start = 0xa0, .end = 0xbf },
-        	{ .name = "dma2", .start = 0xc0, .end = 0xdf },
-	};
-
-	struct resource *io = &ioport_resource;
-	size_t i;
-
-	if (hose_head) {
-		struct pci_controller *hose;
-		for (hose = hose_head; hose; hose = hose->next)
-			if (hose->index == 0) {
-				io = hose->io_space;
-				break;
-			}
-	}
-
-	/* Fix up for the Jensen's queer RTC placement.  */
-	standard_io_resources[0].start = RTC_PORT(0);
-	standard_io_resources[0].end = RTC_PORT(0) + 0x10;
-
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
-		request_resource(io, standard_io_resources+i);
-}
-
-#define PFN_MAX		PFN_DOWN(0x80000000)
-#define for_each_mem_cluster(memdesc, _cluster, i)		\
-	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
-	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
-
-static unsigned long __init
-get_mem_size_limit(char *s)
-{
-        unsigned long end = 0;
-        char *from = s;
-
-        end = simple_strtoul(from, &from, 0);
-        if ( *from == 'K' || *from == 'k' ) {
-                end = end << 10;
-                from++;
-        } else if ( *from == 'M' || *from == 'm' ) {
-                end = end << 20;
-                from++;
-        } else if ( *from == 'G' || *from == 'g' ) {
-                end = end << 30;
-                from++;
-        }
-        return end >> PAGE_SHIFT; /* Return the PFN of the limit. */
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void * __init
-move_initrd(unsigned long mem_limit)
-{
-	void *start;
-	unsigned long size;
-
-	size = initrd_end - initrd_start;
-	start = __alloc_bootmem(PAGE_ALIGN(size), PAGE_SIZE, 0);
-	if (!start || __pa(start) + size > mem_limit) {
-		initrd_start = initrd_end = 0;
-		return NULL;
-	}
-	memmove(start, (void *)initrd_start, size);
-	initrd_start = (unsigned long)start;
-	initrd_end = initrd_start + size;
-	printk("initrd moved to %p\n", start);
-	return start;
-}
-#endif
-
-#ifndef CONFIG_DISCONTIGMEM
-static void __init
-setup_memory(void *kernel_end)
-{
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	unsigned long start_kernel_pfn, end_kernel_pfn;
-	unsigned long bootmap_size, bootmap_pages, bootmap_start;
-	unsigned long start, end;
-	unsigned long i;
-
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	for_each_mem_cluster(memdesc, cluster, i) {
-		printk("memcluster %lu, usage %01lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
-		end = cluster->start_pfn + cluster->numpages;
-		if (end > max_low_pfn)
-			max_low_pfn = end;
-	}
-
-	/*
-	 * Except for the NUMA systems (wildfire, marvel) all of the 
-	 * Alpha systems we run on support 32GB of memory or less.
-	 * Since the NUMA systems introduce large holes in memory addressing,
-	 * we can get into a situation where there is not enough contiguous
-	 * memory for the memory map. 
-	 *
-	 * Limit memory to the first 32GB to limit the NUMA systems to 
-	 * memory on their first node (wildfire) or 2 (marvel) to avoid 
-	 * not being able to produce the memory map. In order to access 
-	 * all of the memory on the NUMA systems, build with discontiguous
-	 * memory support.
-	 *
-	 * If the user specified a memory limit, let that memory limit stand.
-	 */
-	if (!mem_size_limit) 
-		mem_size_limit = (32ul * 1024 * 1024 * 1024) >> PAGE_SHIFT;
-
-	if (mem_size_limit && max_low_pfn >= mem_size_limit)
-	{
-		printk("setup: forcing memory size to %ldK (from %ldK).\n",
-		       mem_size_limit << (PAGE_SHIFT - 10),
-		       max_low_pfn    << (PAGE_SHIFT - 10));
-		max_low_pfn = mem_size_limit;
-	}
-
-	/* Find the bounds of kernel memory.  */
-	start_kernel_pfn = PFN_DOWN(KERNEL_START_PHYS);
-	end_kernel_pfn = PFN_UP(virt_to_phys(kernel_end));
-	bootmap_start = -1;
-
- try_again:
-	if (max_low_pfn <= end_kernel_pfn)
-		panic("not enough memory to boot");
-
-	/* We need to know how many physically contiguous pages
-	   we'll need for the bootmap.  */
-	bootmap_pages = bootmem_bootmap_pages(max_low_pfn);
-
-	/* Now find a good region where to allocate the bootmap.  */
-	for_each_mem_cluster(memdesc, cluster, i) {
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = start + cluster->numpages;
-		if (start >= max_low_pfn)
-			continue;
-		if (end > max_low_pfn)
-			end = max_low_pfn;
-		if (start < start_kernel_pfn) {
-			if (end > end_kernel_pfn
-			    && end - end_kernel_pfn >= bootmap_pages) {
-				bootmap_start = end_kernel_pfn;
-				break;
-			} else if (end > start_kernel_pfn)
-				end = start_kernel_pfn;
-		} else if (start < end_kernel_pfn)
-			start = end_kernel_pfn;
-		if (end - start >= bootmap_pages) {
-			bootmap_start = start;
-			break;
-		}
-	}
-
-	if (bootmap_start == ~0UL) {
-		max_low_pfn >>= 1;
-		goto try_again;
-	}
-
-	/* Allocate the bootmap and mark the whole MM as reserved.  */
-	bootmap_size = init_bootmem(bootmap_start, max_low_pfn);
-
-	/* Mark the free regions.  */
-	for_each_mem_cluster(memdesc, cluster, i) {
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = cluster->start_pfn + cluster->numpages;
-		if (start >= max_low_pfn)
-			continue;
-		if (end > max_low_pfn)
-			end = max_low_pfn;
-		if (start < start_kernel_pfn) {
-			if (end > end_kernel_pfn) {
-				free_bootmem(PFN_PHYS(start),
-					     (PFN_PHYS(start_kernel_pfn)
-					      - PFN_PHYS(start)));
-				printk("freeing pages %ld:%ld\n",
-				       start, start_kernel_pfn);
-				start = end_kernel_pfn;
-			} else if (end > start_kernel_pfn)
-				end = start_kernel_pfn;
-		} else if (start < end_kernel_pfn)
-			start = end_kernel_pfn;
-		if (start >= end)
-			continue;
-
-		free_bootmem(PFN_PHYS(start), PFN_PHYS(end) - PFN_PHYS(start));
-		printk("freeing pages %ld:%ld\n", start, end);
-	}
-
-	/* Reserve the bootmap memory.  */
-	reserve_bootmem(PFN_PHYS(bootmap_start), bootmap_size,
-			BOOTMEM_DEFAULT);
-	printk("reserving pages %ld:%ld\n", bootmap_start, bootmap_start+PFN_UP(bootmap_size));
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	initrd_start = INITRD_START;
-	if (initrd_start) {
-		initrd_end = initrd_start+INITRD_SIZE;
-		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		       (void *) initrd_start, INITRD_SIZE);
-
-		if ((void *)initrd_end > phys_to_virt(PFN_PHYS(max_low_pfn))) {
-			if (!move_initrd(PFN_PHYS(max_low_pfn)))
-				printk("initrd extends beyond end of memory "
-				       "(0x%08lx > 0x%p)\ndisabling initrd\n",
-				       initrd_end,
-				       phys_to_virt(PFN_PHYS(max_low_pfn)));
-		} else {
-			reserve_bootmem(virt_to_phys((void *)initrd_start),
-					INITRD_SIZE, BOOTMEM_DEFAULT);
-		}
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-#else
-extern void setup_memory(void *);
-#endif /* !CONFIG_DISCONTIGMEM */
-
-int __init
-page_is_ram(unsigned long pfn)
-{
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	unsigned long i;
-
-	memdesc = (struct memdesc_struct *)
-		(hwrpb->mddt_offset + (unsigned long) hwrpb);
-	for_each_mem_cluster(memdesc, cluster, i)
-	{
-		if (pfn >= cluster->start_pfn  &&
-		    pfn < cluster->start_pfn + cluster->numpages) {
-			return (cluster->usage & 3) ? 0 : 1;
-		}
-	}
-
-	return 0;
-}
-
-static int __init
-register_cpus(void)
-{
-	int i;
-
-	for_each_possible_cpu(i) {
-		struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL);
-		if (!p)
-			return -ENOMEM;
-		register_cpu(p, i);
-	}
-	return 0;
-}
-
-arch_initcall(register_cpus);
-
-void __init
-setup_arch(char **cmdline_p)
-{
-	extern char _end[];
-
-	struct alpha_machine_vector *vec = NULL;
-	struct percpu_struct *cpu;
-	char *type_name, *var_name, *p;
-	void *kernel_end = _end; /* end of kernel */
-	char *args = command_line;
-
-	hwrpb = (struct hwrpb_struct*) __va(INIT_HWRPB->phys_addr);
-	boot_cpuid = hard_smp_processor_id();
-
-        /*
-	 * Pre-process the system type to make sure it will be valid.
-	 *
-	 * This may restore real CABRIO and EB66+ family names, ie
-	 * EB64+ and EB66.
-	 *
-	 * Oh, and "white box" AS800 (aka DIGITAL Server 3000 series)
-	 * and AS1200 (DIGITAL Server 5000 series) have the type as
-	 * the negative of the real one.
-	 */
-        if ((long)hwrpb->sys_type < 0) {
-		hwrpb->sys_type = -((long)hwrpb->sys_type);
-		hwrpb_update_checksum(hwrpb);
-	}
-
-	/* Register a call for panic conditions. */
-	atomic_notifier_chain_register(&panic_notifier_list,
-			&alpha_panic_block);
-
-#ifdef CONFIG_ALPHA_GENERIC
-	/* Assume that we've booted from SRM if we haven't booted from MILO.
-	   Detect the later by looking for "MILO" in the system serial nr.  */
-	alpha_using_srm = strncmp((const char *)hwrpb->ssn, "MILO", 4) != 0;
-#endif
-
-	/* If we are using SRM, we want to allow callbacks
-	   as early as possible, so do this NOW, and then
-	   they should work immediately thereafter.
-	*/
-	kernel_end = callback_init(kernel_end);
-
-	/* 
-	 * Locate the command line.
-	 */
-	/* Hack for Jensen... since we're restricted to 8 or 16 chars for
-	   boot flags depending on the boot mode, we need some shorthand.
-	   This should do for installation.  */
-	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
-		strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof command_line);
-	} else {
-		strlcpy(command_line, COMMAND_LINE, sizeof command_line);
-	}
-	strcpy(boot_command_line, command_line);
-	*cmdline_p = command_line;
-
-	/* 
-	 * Process command-line arguments.
-	 */
-	while ((p = strsep(&args, " \t")) != NULL) {
-		if (!*p) continue;
-		if (strncmp(p, "alpha_mv=", 9) == 0) {
-			vec = get_sysvec_byname(p+9);
-			continue;
-		}
-		if (strncmp(p, "cycle=", 6) == 0) {
-			est_cycle_freq = simple_strtol(p+6, NULL, 0);
-			continue;
-		}
-		if (strncmp(p, "mem=", 4) == 0) {
-			mem_size_limit = get_mem_size_limit(p+4);
-			continue;
-		}
-		if (strncmp(p, "srmcons", 7) == 0) {
-			srmcons_output |= 1;
-			continue;
-		}
-		if (strncmp(p, "console=srm", 11) == 0) {
-			srmcons_output |= 2;
-			continue;
-		}
-		if (strncmp(p, "gartsize=", 9) == 0) {
-			alpha_agpgart_size =
-				get_mem_size_limit(p+9) << PAGE_SHIFT;
-			continue;
-		}
-#ifdef CONFIG_VERBOSE_MCHECK
-		if (strncmp(p, "verbose_mcheck=", 15) == 0) {
-			alpha_verbose_mcheck = simple_strtol(p+15, NULL, 0);
-			continue;
-		}
-#endif
-	}
-
-	/* Replace the command line, now that we've killed it with strsep.  */
-	strcpy(command_line, boot_command_line);
-
-	/* If we want SRM console printk echoing early, do it now. */
-	if (alpha_using_srm && srmcons_output) {
-		register_srm_console();
-
-		/*
-		 * If "console=srm" was specified, clear the srmcons_output
-		 * flag now so that time.c won't unregister_srm_console
-		 */
-		if (srmcons_output & 2)
-			srmcons_output = 0;
-	}
-
-#ifdef CONFIG_MAGIC_SYSRQ
-	/* If we're using SRM, make sysrq-b halt back to the prom,
-	   not auto-reboot.  */
-	if (alpha_using_srm) {
-		struct sysrq_key_op *op = __sysrq_get_key_op('b');
-		op->handler = (void *) machine_halt;
-	}
-#endif
-
-	/*
-	 * Identify and reconfigure for the current system.
-	 */
-	cpu = (struct percpu_struct*)((char*)hwrpb + hwrpb->processor_offset);
-
-	get_sysnames(hwrpb->sys_type, hwrpb->sys_variation,
-		     cpu->type, &type_name, &var_name);
-	if (*var_name == '0')
-		var_name = "";
-
-	if (!vec) {
-		vec = get_sysvec(hwrpb->sys_type, hwrpb->sys_variation,
-				 cpu->type);
-	}
-
-	if (!vec) {
-		panic("Unsupported system type: %s%s%s (%ld %ld)\n",
-		      type_name, (*var_name ? " variation " : ""), var_name,
-		      hwrpb->sys_type, hwrpb->sys_variation);
-	}
-	if (vec != &alpha_mv) {
-		alpha_mv = *vec;
-	}
-	
-	printk("Booting "
-#ifdef CONFIG_ALPHA_GENERIC
-	       "GENERIC "
-#endif
-	       "on %s%s%s using machine vector %s from %s\n",
-	       type_name, (*var_name ? " variation " : ""),
-	       var_name, alpha_mv.vector_name,
-	       (alpha_using_srm ? "SRM" : "MILO"));
-
-	printk("Major Options: "
-#ifdef CONFIG_SMP
-	       "SMP "
-#endif
-#ifdef CONFIG_ALPHA_EV56
-	       "EV56 "
-#endif
-#ifdef CONFIG_ALPHA_EV67
-	       "EV67 "
-#endif
-#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
-	       "LEGACY_START "
-#endif
-#ifdef CONFIG_VERBOSE_MCHECK
-	       "VERBOSE_MCHECK "
-#endif
-
-#ifdef CONFIG_DISCONTIGMEM
-	       "DISCONTIGMEM "
-#ifdef CONFIG_NUMA
-	       "NUMA "
-#endif
-#endif
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-	       "DEBUG_SPINLOCK "
-#endif
-#ifdef CONFIG_MAGIC_SYSRQ
-	       "MAGIC_SYSRQ "
-#endif
-	       "\n");
-
-	printk("Command line: %s\n", command_line);
-
-	/* 
-	 * Sync up the HAE.
-	 * Save the SRM's current value for restoration.
-	 */
-	srm_hae = *alpha_mv.hae_register;
-	__set_hae(alpha_mv.hae_cache);
-
-	/* Reset enable correctable error reports.  */
-	wrmces(0x7);
-
-	/* Find our memory.  */
-	setup_memory(kernel_end);
-
-	/* First guess at cpu cache sizes.  Do this before init_arch.  */
-	determine_cpu_caches(cpu->type);
-
-	/* Initialize the machine.  Usually has to do with setting up
-	   DMA windows and the like.  */
-	if (alpha_mv.init_arch)
-		alpha_mv.init_arch();
-
-	/* Reserve standard resources.  */
-	reserve_std_resources();
-
-	/* 
-	 * Give us a default console.  TGA users will see nothing until
-	 * chr_dev_init is called, rather late in the boot sequence.
-	 */
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-	/* Default root filesystem to sda2.  */
-	ROOT_DEV = Root_SDA2;
-
-#ifdef CONFIG_EISA
-	/* FIXME:  only set this when we actually have EISA in this box? */
-	EISA_bus = 1;
-#endif
-
- 	/*
-	 * Check ASN in HWRPB for validity, report if bad.
-	 * FIXME: how was this failing?  Should we trust it instead,
-	 * and copy the value into alpha_mv.max_asn?
- 	 */
-
- 	if (hwrpb->max_asn != MAX_ASN) {
-		printk("Max ASN from HWRPB is bad (0x%lx)\n", hwrpb->max_asn);
- 	}
-
-	/*
-	 * Identify the flock of penguins.
-	 */
-
-#ifdef CONFIG_SMP
-	setup_smp();
-#endif
-	paging_init();
-}
-
-static char sys_unknown[] = "Unknown";
-static char systype_names[][16] = {
-	"0",
-	"ADU", "Cobra", "Ruby", "Flamingo", "Mannequin", "Jensen",
-	"Pelican", "Morgan", "Sable", "Medulla", "Noname",
-	"Turbolaser", "Avanti", "Mustang", "Alcor", "Tradewind",
-	"Mikasa", "EB64", "EB66", "EB64+", "AlphaBook1",
-	"Rawhide", "K2", "Lynx", "XL", "EB164", "Noritake",
-	"Cortex", "29", "Miata", "XXM", "Takara", "Yukon",
-	"Tsunami", "Wildfire", "CUSCO", "Eiger", "Titan", "Marvel"
-};
-
-static char unofficial_names[][8] = {"100", "Ruffian"};
-
-static char api_names[][16] = {"200", "Nautilus"};
-
-static char eb164_names[][8] = {"EB164", "PC164", "LX164", "SX164", "RX164"};
-static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
-
-static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
-static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
-
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
-static char marvel_names[][16] = {
-	"Marvel/EV7"
-};
-static int marvel_indices[] = { 0 };
-
-static char rawhide_names[][16] = {
-	"Dodge", "Wrangler", "Durango", "Tincup", "DaVinci"
-};
-static int rawhide_indices[] = {0,0,0,1,1,2,2,3,3,4,4};
-
-static char titan_names[][16] = {
-	"DEFAULT", "Privateer", "Falcon", "Granite"
-};
-static int titan_indices[] = {0,1,2,2,3};
-
-static char tsunami_names[][16] = {
-	"0", "DP264", "Warhol", "Windjammer", "Monet", "Clipper",
-	"Goldrush", "Webbrick", "Catamaran", "Brisbane", "Melbourne",
-	"Flying Clipper", "Shark"
-};
-static int tsunami_indices[] = {0,1,2,3,4,5,6,7,8,9,10,11,12};
-
-static struct alpha_machine_vector * __init
-get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
-{
-	static struct alpha_machine_vector *systype_vecs[] __initdata =
-	{
-		NULL,		/* 0 */
-		NULL,		/* ADU */
-		NULL,		/* Cobra */
-		NULL,		/* Ruby */
-		NULL,		/* Flamingo */
-		NULL,		/* Mannequin */
-		&jensen_mv,
-		NULL, 		/* Pelican */
-		NULL,		/* Morgan */
-		NULL,		/* Sable -- see below.  */
-		NULL,		/* Medulla */
-		&noname_mv,
-		NULL,		/* Turbolaser */
-		&avanti_mv,
-		NULL,		/* Mustang */
-		NULL,		/* Alcor, Bret, Maverick. HWRPB inaccurate? */
-		NULL,		/* Tradewind */
-		NULL,		/* Mikasa -- see below.  */
-		NULL,		/* EB64 */
-		NULL,		/* EB66 -- see variation.  */
-		NULL,		/* EB64+ -- see variation.  */
-		&alphabook1_mv,
-		&rawhide_mv,
-		NULL,		/* K2 */
-		&lynx_mv,	/* Lynx */
-		&xl_mv,
-		NULL,		/* EB164 -- see variation.  */
-		NULL,		/* Noritake -- see below.  */
-		NULL,		/* Cortex */
-		NULL,		/* 29 */
-		&miata_mv,
-		NULL,		/* XXM */
-		&takara_mv,
-		NULL,		/* Yukon */
-		NULL,		/* Tsunami -- see variation.  */
-		&wildfire_mv,	/* Wildfire */
-		NULL,		/* CUSCO */
-		&eiger_mv,	/* Eiger */
-		NULL,		/* Titan */
-		NULL,		/* Marvel */
-	};
-
-	static struct alpha_machine_vector *unofficial_vecs[] __initdata =
-	{
-		NULL,		/* 100 */
-		&ruffian_mv,
-	};
-
-	static struct alpha_machine_vector *api_vecs[] __initdata =
-	{
-		NULL,		/* 200 */
-		&nautilus_mv,
-	};
-
-	static struct alpha_machine_vector *alcor_vecs[] __initdata = 
-	{
-		&alcor_mv, &xlt_mv, &xlt_mv
-	};
-
-	static struct alpha_machine_vector *eb164_vecs[] __initdata =
-	{
-		&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
-	};
-
-	static struct alpha_machine_vector *eb64p_vecs[] __initdata =
-	{
-		&eb64p_mv,
-		&cabriolet_mv,
-		&cabriolet_mv		/* AlphaPCI64 */
-	};
-
-	static struct alpha_machine_vector *eb66_vecs[] __initdata =
-	{
-		&eb66_mv,
-		&eb66p_mv
-	};
-
-	static struct alpha_machine_vector *marvel_vecs[] __initdata =
-	{
-		&marvel_ev7_mv,
-	};
-
-	static struct alpha_machine_vector *titan_vecs[] __initdata =
-	{
-		&titan_mv,		/* default   */
-		&privateer_mv,		/* privateer */
-		&titan_mv,		/* falcon    */
-		&privateer_mv,		/* granite   */
-	};
-
-	static struct alpha_machine_vector *tsunami_vecs[]  __initdata =
-	{
-		NULL,
-		&dp264_mv,		/* dp264 */
-		&dp264_mv,		/* warhol */
-		&dp264_mv,		/* windjammer */
-		&monet_mv,		/* monet */
-		&clipper_mv,		/* clipper */
-		&dp264_mv,		/* goldrush */
-		&webbrick_mv,		/* webbrick */
-		&dp264_mv,		/* catamaran */
-		NULL,			/* brisbane? */
-		NULL,			/* melbourne? */
-		NULL,			/* flying clipper? */
-		&shark_mv,		/* shark */
-	};
-
-	/* ??? Do we need to distinguish between Rawhides?  */
-
-	struct alpha_machine_vector *vec;
-
-	/* Search the system tables first... */
-	vec = NULL;
-	if (type < ARRAY_SIZE(systype_vecs)) {
-		vec = systype_vecs[type];
-	} else if ((type > ST_API_BIAS) &&
-		   (type - ST_API_BIAS) < ARRAY_SIZE(api_vecs)) {
-		vec = api_vecs[type - ST_API_BIAS];
-	} else if ((type > ST_UNOFFICIAL_BIAS) &&
-		   (type - ST_UNOFFICIAL_BIAS) < ARRAY_SIZE(unofficial_vecs)) {
-		vec = unofficial_vecs[type - ST_UNOFFICIAL_BIAS];
-	}
-
-	/* If we've not found one, try for a variation.  */
-
-	if (!vec) {
-		/* Member ID is a bit-field. */
-		unsigned long member = (variation >> 10) & 0x3f;
-
-		cpu &= 0xffffffff; /* make it usable */
-
-		switch (type) {
-		case ST_DEC_ALCOR:
-			if (member < ARRAY_SIZE(alcor_indices))
-				vec = alcor_vecs[alcor_indices[member]];
-			break;
-		case ST_DEC_EB164:
-			if (member < ARRAY_SIZE(eb164_indices))
-				vec = eb164_vecs[eb164_indices[member]];
-			/* PC164 may show as EB164 variation with EV56 CPU,
-			   but, since no true EB164 had anything but EV5... */
-			if (vec == &eb164_mv && cpu == EV56_CPU)
-				vec = &pc164_mv;
-			break;
-		case ST_DEC_EB64P:
-			if (member < ARRAY_SIZE(eb64p_indices))
-				vec = eb64p_vecs[eb64p_indices[member]];
-			break;
-		case ST_DEC_EB66:
-			if (member < ARRAY_SIZE(eb66_indices))
-				vec = eb66_vecs[eb66_indices[member]];
-			break;
-		case ST_DEC_MARVEL:
-			if (member < ARRAY_SIZE(marvel_indices))
-				vec = marvel_vecs[marvel_indices[member]];
-			break;
-		case ST_DEC_TITAN:
-			vec = titan_vecs[0];	/* default */
-			if (member < ARRAY_SIZE(titan_indices))
-				vec = titan_vecs[titan_indices[member]];
-			break;
-		case ST_DEC_TSUNAMI:
-			if (member < ARRAY_SIZE(tsunami_indices))
-				vec = tsunami_vecs[tsunami_indices[member]];
-			break;
-		case ST_DEC_1000:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &mikasa_primo_mv;
-			else
-				vec = &mikasa_mv;
-			break;
-		case ST_DEC_NORITAKE:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &noritake_primo_mv;
-			else
-				vec = &noritake_mv;
-			break;
-		case ST_DEC_2100_A500:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &sable_gamma_mv;
-			else
-				vec = &sable_mv;
-			break;
-		}
-	}
-	return vec;
-}
-
-static struct alpha_machine_vector * __init
-get_sysvec_byname(const char *name)
-{
-	static struct alpha_machine_vector *all_vecs[] __initdata =
-	{
-		&alcor_mv,
-		&alphabook1_mv,
-		&avanti_mv,
-		&cabriolet_mv,
-		&clipper_mv,
-		&dp264_mv,
-		&eb164_mv,
-		&eb64p_mv,
-		&eb66_mv,
-		&eb66p_mv,
-		&eiger_mv,
-		&jensen_mv,
-		&lx164_mv,
-		&lynx_mv,
-		&miata_mv,
-		&mikasa_mv,
-		&mikasa_primo_mv,
-		&monet_mv,
-		&nautilus_mv,
-		&noname_mv,
-		&noritake_mv,
-		&noritake_primo_mv,
-		&p2k_mv,
-		&pc164_mv,
-		&privateer_mv,
-		&rawhide_mv,
-		&ruffian_mv,
-		&rx164_mv,
-		&sable_mv,
-		&sable_gamma_mv,
-		&shark_mv,
-		&sx164_mv,
-		&takara_mv,
-		&webbrick_mv,
-		&wildfire_mv,
-		&xl_mv,
-		&xlt_mv
-	};
-
-	size_t i;
-
-	for (i = 0; i < ARRAY_SIZE(all_vecs); ++i) {
-		struct alpha_machine_vector *mv = all_vecs[i];
-		if (strcasecmp(mv->vector_name, name) == 0)
-			return mv;
-	}
-	return NULL;
-}
-
-static void
-get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
-	     char **type_name, char **variation_name)
-{
-	unsigned long member;
-
-	/* If not in the tables, make it UNKNOWN,
-	   else set type name to family */
-	if (type < ARRAY_SIZE(systype_names)) {
-		*type_name = systype_names[type];
-	} else if ((type > ST_API_BIAS) &&
-		   (type - ST_API_BIAS) < ARRAY_SIZE(api_names)) {
-		*type_name = api_names[type - ST_API_BIAS];
-	} else if ((type > ST_UNOFFICIAL_BIAS) &&
-		   (type - ST_UNOFFICIAL_BIAS) < ARRAY_SIZE(unofficial_names)) {
-		*type_name = unofficial_names[type - ST_UNOFFICIAL_BIAS];
-	} else {
-		*type_name = sys_unknown;
-		*variation_name = sys_unknown;
-		return;
-	}
-
-	/* Set variation to "0"; if variation is zero, done.  */
-	*variation_name = systype_names[0];
-	if (variation == 0) {
-		return;
-	}
-
-	member = (variation >> 10) & 0x3f; /* member ID is a bit-field */
-
-	cpu &= 0xffffffff; /* make it usable */
-
-	switch (type) { /* select by family */
-	default: /* default to variation "0" for now */
-		break;
-	case ST_DEC_EB164:
-		if (member < ARRAY_SIZE(eb164_indices))
-			*variation_name = eb164_names[eb164_indices[member]];
-		/* PC164 may show as EB164 variation, but with EV56 CPU,
-		   so, since no true EB164 had anything but EV5... */
-		if (eb164_indices[member] == 0 && cpu == EV56_CPU)
-			*variation_name = eb164_names[1]; /* make it PC164 */
-		break;
-	case ST_DEC_ALCOR:
-		if (member < ARRAY_SIZE(alcor_indices))
-			*variation_name = alcor_names[alcor_indices[member]];
-		break;
-	case ST_DEC_EB64P:
-		if (member < ARRAY_SIZE(eb64p_indices))
-			*variation_name = eb64p_names[eb64p_indices[member]];
-		break;
-	case ST_DEC_EB66:
-		if (member < ARRAY_SIZE(eb66_indices))
-			*variation_name = eb66_names[eb66_indices[member]];
-		break;
-	case ST_DEC_MARVEL:
-		if (member < ARRAY_SIZE(marvel_indices))
-			*variation_name = marvel_names[marvel_indices[member]];
-		break;
-	case ST_DEC_RAWHIDE:
-		if (member < ARRAY_SIZE(rawhide_indices))
-			*variation_name = rawhide_names[rawhide_indices[member]];
-		break;
-	case ST_DEC_TITAN:
-		*variation_name = titan_names[0];	/* default */
-		if (member < ARRAY_SIZE(titan_indices))
-			*variation_name = titan_names[titan_indices[member]];
-		break;
-	case ST_DEC_TSUNAMI:
-		if (member < ARRAY_SIZE(tsunami_indices))
-			*variation_name = tsunami_names[tsunami_indices[member]];
-		break;
-	}
-}
-
-/*
- * A change was made to the HWRPB via an ECO and the following code
- * tracks a part of the ECO.  In HWRPB versions less than 5, the ECO
- * was not implemented in the console firmware.  If it's revision 5 or
- * greater we can get the name of the platform as an ASCII string from
- * the HWRPB.  That's what this function does.  It checks the revision
- * level and if the string is in the HWRPB it returns the address of
- * the string--a pointer to the name of the platform.
- *
- * Returns:
- *      - Pointer to a ASCII string if it's in the HWRPB
- *      - Pointer to a blank string if the data is not in the HWRPB.
- */
-
-static char *
-platform_string(void)
-{
-	struct dsr_struct *dsr;
-	static char unk_system_string[] = "N/A";
-
-	/* Go to the console for the string pointer.
-	 * If the rpb_vers is not 5 or greater the rpb
-	 * is old and does not have this data in it.
-	 */
-	if (hwrpb->revision < 5)
-		return (unk_system_string);
-	else {
-		/* The Dynamic System Recognition struct
-		 * has the system platform name starting
-		 * after the character count of the string.
-		 */
-		dsr =  ((struct dsr_struct *)
-			((char *)hwrpb + hwrpb->dsr_offset));
-		return ((char *)dsr + (dsr->sysname_off +
-				       sizeof(long)));
-	}
-}
-
-static int
-get_nr_processors(struct percpu_struct *cpubase, unsigned long num)
-{
-	struct percpu_struct *cpu;
-	unsigned long i;
-	int count = 0;
-
-	for (i = 0; i < num; i++) {
-		cpu = (struct percpu_struct *)
-			((char *)cpubase + i*hwrpb->processor_size);
-		if ((cpu->flags & 0x1cc) == 0x1cc)
-			count++;
-	}
-	return count;
-}
-
-static void
-show_cache_size (struct seq_file *f, const char *which, int shape)
-{
-	if (shape == -1)
-		seq_printf (f, "%s\t\t: n/a\n", which);
-	else if (shape == 0)
-		seq_printf (f, "%s\t\t: unknown\n", which);
-	else
-		seq_printf (f, "%s\t\t: %dK, %d-way, %db line\n",
-			    which, shape >> 10, shape & 15,
-			    1 << ((shape >> 4) & 15));
-}
-
-static int
-show_cpuinfo(struct seq_file *f, void *slot)
-{
-	extern struct unaligned_stat {
-		unsigned long count, va, pc;
-	} unaligned[2];
-
-	static char cpu_names[][8] = {
-		"EV3", "EV4", "Simulate", "LCA4", "EV5", "EV45", "EV56",
-		"EV6", "PCA56", "PCA57", "EV67", "EV68CB", "EV68AL",
-		"EV68CX", "EV7", "EV79", "EV69"
-	};
-
-	struct percpu_struct *cpu = slot;
-	unsigned int cpu_index;
-	char *cpu_name;
-	char *systype_name;
-	char *sysvariation_name;
-	int nr_processors;
-
-	cpu_index = (unsigned) (cpu->type - 1);
-	cpu_name = "Unknown";
-	if (cpu_index < ARRAY_SIZE(cpu_names))
-		cpu_name = cpu_names[cpu_index];
-
-	get_sysnames(hwrpb->sys_type, hwrpb->sys_variation,
-		     cpu->type, &systype_name, &sysvariation_name);
-
-	nr_processors = get_nr_processors(cpu, hwrpb->nr_processors);
-
-	seq_printf(f, "cpu\t\t\t: Alpha\n"
-		      "cpu model\t\t: %s\n"
-		      "cpu variation\t\t: %ld\n"
-		      "cpu revision\t\t: %ld\n"
-		      "cpu serial number\t: %s\n"
-		      "system type\t\t: %s\n"
-		      "system variation\t: %s\n"
-		      "system revision\t\t: %ld\n"
-		      "system serial number\t: %s\n"
-		      "cycle frequency [Hz]\t: %lu %s\n"
-		      "timer frequency [Hz]\t: %lu.%02lu\n"
-		      "page size [bytes]\t: %ld\n"
-		      "phys. address bits\t: %ld\n"
-		      "max. addr. space #\t: %ld\n"
-		      "BogoMIPS\t\t: %lu.%02lu\n"
-		      "kernel unaligned acc\t: %ld (pc=%lx,va=%lx)\n"
-		      "user unaligned acc\t: %ld (pc=%lx,va=%lx)\n"
-		      "platform string\t\t: %s\n"
-		      "cpus detected\t\t: %d\n",
-		       cpu_name, cpu->variation, cpu->revision,
-		       (char*)cpu->serial_no,
-		       systype_name, sysvariation_name, hwrpb->sys_revision,
-		       (char*)hwrpb->ssn,
-		       est_cycle_freq ? : hwrpb->cycle_freq,
-		       est_cycle_freq ? "est." : "",
-		       hwrpb->intr_freq / 4096,
-		       (100 * hwrpb->intr_freq / 4096) % 100,
-		       hwrpb->pagesize,
-		       hwrpb->pa_bits,
-		       hwrpb->max_asn,
-		       loops_per_jiffy / (500000/HZ),
-		       (loops_per_jiffy / (5000/HZ)) % 100,
-		       unaligned[0].count, unaligned[0].pc, unaligned[0].va,
-		       unaligned[1].count, unaligned[1].pc, unaligned[1].va,
-		       platform_string(), nr_processors);
-
-#ifdef CONFIG_SMP
-	seq_printf(f, "cpus active\t\t: %u\n"
-		      "cpu active mask\t\t: %016lx\n",
-		       num_online_cpus(), cpumask_bits(cpu_possible_mask)[0]);
-#endif
-
-	show_cache_size (f, "L1 Icache", alpha_l1i_cacheshape);
-	show_cache_size (f, "L1 Dcache", alpha_l1d_cacheshape);
-	show_cache_size (f, "L2 cache", alpha_l2_cacheshape);
-	show_cache_size (f, "L3 cache", alpha_l3_cacheshape);
-
-	return 0;
-}
-
-static int __init
-read_mem_block(int *addr, int stride, int size)
-{
-	long nloads = size / stride, cnt, tmp;
-
-	__asm__ __volatile__(
-	"	rpcc    %0\n"
-	"1:	ldl	%3,0(%2)\n"
-	"	subq	%1,1,%1\n"
-	/* Next two XORs introduce an explicit data dependency between
-	   consecutive loads in the loop, which will give us true load
-	   latency. */
-	"	xor	%3,%2,%2\n"
-	"	xor	%3,%2,%2\n"
-	"	addq	%2,%4,%2\n"
-	"	bne	%1,1b\n"
-	"	rpcc	%3\n"
-	"	subl	%3,%0,%0\n"
-	: "=&r" (cnt), "=&r" (nloads), "=&r" (addr), "=&r" (tmp)
-	: "r" (stride), "1" (nloads), "2" (addr));
-
-	return cnt / (size / stride);
-}
-
-#define CSHAPE(totalsize, linesize, assoc) \
-  ((totalsize & ~0xff) | (linesize << 4) | assoc)
-
-/* ??? EV5 supports up to 64M, but did the systems with more than
-   16M of BCACHE ever exist? */
-#define MAX_BCACHE_SIZE	16*1024*1024
-
-/* Note that the offchip caches are direct mapped on all Alphas. */
-static int __init
-external_cache_probe(int minsize, int width)
-{
-	int cycles, prev_cycles = 1000000;
-	int stride = 1 << width;
-	long size = minsize, maxsize = MAX_BCACHE_SIZE * 2;
-
-	if (maxsize > (max_low_pfn + 1) << PAGE_SHIFT)
-		maxsize = 1 << (ilog2(max_low_pfn + 1) + PAGE_SHIFT);
-
-	/* Get the first block cached. */
-	read_mem_block(__va(0), stride, size);
-
-	while (size < maxsize) {
-		/* Get an average load latency in cycles. */
-		cycles = read_mem_block(__va(0), stride, size);
-		if (cycles > prev_cycles * 2) {
-			/* Fine, we exceed the cache. */
-			printk("%ldK Bcache detected; load hit latency %d "
-			       "cycles, load miss latency %d cycles\n",
-			       size >> 11, prev_cycles, cycles);
-			return CSHAPE(size >> 1, width, 1);
-		}
-		/* Try to get the next block cached. */
-		read_mem_block(__va(size), stride, size);
-		prev_cycles = cycles;
-		size <<= 1;
-	}
-	return -1;	/* No BCACHE found. */
-}
-
-static void __init
-determine_cpu_caches (unsigned int cpu_type)
-{
-	int L1I, L1D, L2, L3;
-
-	switch (cpu_type) {
-	case EV4_CPU:
-	case EV45_CPU:
-	  {
-		if (cpu_type == EV4_CPU)
-			L1I = CSHAPE(8*1024, 5, 1);
-		else
-			L1I = CSHAPE(16*1024, 5, 1);
-		L1D = L1I;
-		L3 = -1;
-	
-		/* BIU_CTL is a write-only Abox register.  PALcode has a
-		   shadow copy, and may be available from some versions
-		   of the CSERVE PALcall.  If we can get it, then
-
-			unsigned long biu_ctl, size;
-			size = 128*1024 * (1 << ((biu_ctl >> 28) & 7));
-			L2 = CSHAPE (size, 5, 1);
-
-		   Unfortunately, we can't rely on that.
-		*/
-		L2 = external_cache_probe(128*1024, 5);
-		break;
-	  }
-
-	case LCA4_CPU:
-	  {
-		unsigned long car, size;
-
-		L1I = L1D = CSHAPE(8*1024, 5, 1);
-		L3 = -1;
-
-		car = *(vuip) phys_to_virt (0x120000078UL);
-		size = 64*1024 * (1 << ((car >> 5) & 7));
-		/* No typo -- 8 byte cacheline size.  Whodathunk.  */
-		L2 = (car & 1 ? CSHAPE (size, 3, 1) : -1);
-		break;
-	  }
-
-	case EV5_CPU:
-	case EV56_CPU:
-	  {
-		unsigned long sc_ctl, width;
-
-		L1I = L1D = CSHAPE(8*1024, 5, 1);
-
-		/* Check the line size of the Scache.  */
-		sc_ctl = *(vulp) phys_to_virt (0xfffff000a8UL);
-		width = sc_ctl & 0x1000 ? 6 : 5;
-		L2 = CSHAPE (96*1024, width, 3);
-
-		/* BC_CONTROL and BC_CONFIG are write-only IPRs.  PALcode
-		   has a shadow copy, and may be available from some versions
-		   of the CSERVE PALcall.  If we can get it, then
-
-			unsigned long bc_control, bc_config, size;
-			size = 1024*1024 * (1 << ((bc_config & 7) - 1));
-			L3 = (bc_control & 1 ? CSHAPE (size, width, 1) : -1);
-
-		   Unfortunately, we can't rely on that.
-		*/
-		L3 = external_cache_probe(1024*1024, width);
-		break;
-	  }
-
-	case PCA56_CPU:
-	case PCA57_CPU:
-	  {
-		if (cpu_type == PCA56_CPU) {
-			L1I = CSHAPE(16*1024, 6, 1);
-			L1D = CSHAPE(8*1024, 5, 1);
-		} else {
-			L1I = CSHAPE(32*1024, 6, 2);
-			L1D = CSHAPE(16*1024, 5, 1);
-		}
-		L3 = -1;
-
-#if 0
-		unsigned long cbox_config, size;
-
-		cbox_config = *(vulp) phys_to_virt (0xfffff00008UL);
-		size = 512*1024 * (1 << ((cbox_config >> 12) & 3));
-
-		L2 = ((cbox_config >> 31) & 1 ? CSHAPE (size, 6, 1) : -1);
-#else
-		L2 = external_cache_probe(512*1024, 6);
-#endif
-		break;
-	  }
-
-	case EV6_CPU:
-	case EV67_CPU:
-	case EV68CB_CPU:
-	case EV68AL_CPU:
-	case EV68CX_CPU:
-	case EV69_CPU:
-		L1I = L1D = CSHAPE(64*1024, 6, 2);
-		L2 = external_cache_probe(1024*1024, 6);
-		L3 = -1;
-		break;
-
-	case EV7_CPU:
-	case EV79_CPU:
-		L1I = L1D = CSHAPE(64*1024, 6, 2);
-		L2 = CSHAPE(7*1024*1024/4, 6, 7);
-		L3 = -1;
-		break;
-
-	default:
-		/* Nothing known about this cpu type.  */
-		L1I = L1D = L2 = L3 = 0;
-		break;
-	}
-
-	alpha_l1i_cacheshape = L1I;
-	alpha_l1d_cacheshape = L1D;
-	alpha_l2_cacheshape = L2;
-	alpha_l3_cacheshape = L3;
-}
-
-/*
- * We show only CPU #0 info.
- */
-static void *
-c_start(struct seq_file *f, loff_t *pos)
-{
-	return *pos ? NULL : (char *)hwrpb + hwrpb->processor_offset;
-}
-
-static void *
-c_next(struct seq_file *f, void *v, loff_t *pos)
-{
-	return NULL;
-}
-
-static void
-c_stop(struct seq_file *f, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
-
-
-static int
-alpha_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
-{
-#if 1
-	/* FIXME FIXME FIXME */
-	/* If we are using SRM and serial console, just hard halt here. */
-	if (alpha_using_srm && srmcons_output)
-		__halt();
-#endif
-        return NOTIFY_DONE;
-}
-
-static __init int add_pcspkr(void)
-{
-	struct platform_device *pd;
-	int ret;
-
-	pd = platform_device_alloc("pcspkr", -1);
-	if (!pd)
-		return -ENOMEM;
-
-	ret = platform_device_add(pd);
-	if (ret)
-		platform_device_put(pd);
-
-	return ret;
-}
-device_initcall(add_pcspkr);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/signal.c b/ANDROID_3.4.5/arch/alpha/kernel/signal.c
deleted file mode 100644
index 35f2ef44..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/signal.c
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/signal.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *
- *  1997-11-02  Modified for POSIX.1b signals by Richard Henderson
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/tty.h>
-#include <linux/binfmts.h>
-#include <linux/bitops.h>
-#include <linux/syscalls.h>
-#include <linux/tracehook.h>
-
-#include <asm/uaccess.h>
-#include <asm/sigcontext.h>
-#include <asm/ucontext.h>
-
-#include "proto.h"
-
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage void ret_from_sys_call(void);
-static void do_signal(struct pt_regs *, struct switch_stack *,
-		      unsigned long, unsigned long);
-
-
-/*
- * The OSF/1 sigprocmask calling sequence is different from the
- * C sigprocmask() sequence..
- */
-SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
-{
-	sigset_t oldmask;
-	sigset_t mask;
-	unsigned long res;
-
-	siginitset(&mask, newmask & _BLOCKABLE);
-	res = sigprocmask(how, &mask, &oldmask);
-	if (!res) {
-		force_successful_syscall_return();
-		res = oldmask.sig[0];
-	}
-	return res;
-}
-
-SYSCALL_DEFINE3(osf_sigaction, int, sig,
-		const struct osf_sigaction __user *, act,
-		struct osf_sigaction __user *, oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
-		    __get_user(mask, &act->sa_mask))
-			return -EFAULT;
-		siginitset(&new_ka.sa.sa_mask, mask);
-		new_ka.ka_restorer = NULL;
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
-		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
-		struct sigaction __user *, oact,
-		size_t, sigsetsize, void __user *, restorer)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (act) {
-		new_ka.ka_restorer = restorer;
-		if (copy_from_user(&new_ka.sa, act, sizeof(*act)))
-			return -EFAULT;
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (copy_to_user(oact, &old_ka.sa, sizeof(*oact)))
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
-{
-	sigset_t blocked;
-
-	current->saved_sigmask = current->blocked;
-
-	mask &= _BLOCKABLE;
-	siginitset(&blocked, mask);
-	set_current_blocked(&blocked);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-{
-	return do_sigaltstack(uss, uoss, rdusp());
-}
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-#if _NSIG_WORDS > 1
-# error "Non SA_SIGINFO frame needs rearranging"
-#endif
-
-struct sigframe
-{
-	struct sigcontext sc;
-	unsigned int retcode[3];
-};
-
-struct rt_sigframe
-{
-	struct siginfo info;
-	struct ucontext uc;
-	unsigned int retcode[3];
-};
-
-/* If this changes, userland unwinders that Know Things about our signal
-   frame will break.  Do not undertake lightly.  It also implies an ABI
-   change wrt the size of siginfo_t, which may cause some pain.  */
-extern char compile_time_assert
-        [offsetof(struct rt_sigframe, uc.uc_mcontext) == 176 ? 1 : -1];
-
-#define INSN_MOV_R30_R16	0x47fe0410
-#define INSN_LDI_R0		0x201f0000
-#define INSN_CALLSYS		0x00000083
-
-static long
-restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
-		   struct switch_stack *sw)
-{
-	unsigned long usp;
-	long i, err = __get_user(regs->pc, &sc->sc_pc);
-
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	sw->r26 = (unsigned long) ret_from_sys_call;
-
-	err |= __get_user(regs->r0, sc->sc_regs+0);
-	err |= __get_user(regs->r1, sc->sc_regs+1);
-	err |= __get_user(regs->r2, sc->sc_regs+2);
-	err |= __get_user(regs->r3, sc->sc_regs+3);
-	err |= __get_user(regs->r4, sc->sc_regs+4);
-	err |= __get_user(regs->r5, sc->sc_regs+5);
-	err |= __get_user(regs->r6, sc->sc_regs+6);
-	err |= __get_user(regs->r7, sc->sc_regs+7);
-	err |= __get_user(regs->r8, sc->sc_regs+8);
-	err |= __get_user(sw->r9, sc->sc_regs+9);
-	err |= __get_user(sw->r10, sc->sc_regs+10);
-	err |= __get_user(sw->r11, sc->sc_regs+11);
-	err |= __get_user(sw->r12, sc->sc_regs+12);
-	err |= __get_user(sw->r13, sc->sc_regs+13);
-	err |= __get_user(sw->r14, sc->sc_regs+14);
-	err |= __get_user(sw->r15, sc->sc_regs+15);
-	err |= __get_user(regs->r16, sc->sc_regs+16);
-	err |= __get_user(regs->r17, sc->sc_regs+17);
-	err |= __get_user(regs->r18, sc->sc_regs+18);
-	err |= __get_user(regs->r19, sc->sc_regs+19);
-	err |= __get_user(regs->r20, sc->sc_regs+20);
-	err |= __get_user(regs->r21, sc->sc_regs+21);
-	err |= __get_user(regs->r22, sc->sc_regs+22);
-	err |= __get_user(regs->r23, sc->sc_regs+23);
-	err |= __get_user(regs->r24, sc->sc_regs+24);
-	err |= __get_user(regs->r25, sc->sc_regs+25);
-	err |= __get_user(regs->r26, sc->sc_regs+26);
-	err |= __get_user(regs->r27, sc->sc_regs+27);
-	err |= __get_user(regs->r28, sc->sc_regs+28);
-	err |= __get_user(regs->gp, sc->sc_regs+29);
-	err |= __get_user(usp, sc->sc_regs+30);
-	wrusp(usp);
-
-	for (i = 0; i < 31; i++)
-		err |= __get_user(sw->fp[i], sc->sc_fpregs+i);
-	err |= __get_user(sw->fp[31], &sc->sc_fpcr);
-
-	return err;
-}
-
-/* Note that this syscall is also used by setcontext(3) to install
-   a given sigcontext.  This because it's impossible to set *all*
-   registers and transfer control from userland.  */
-
-asmlinkage void
-do_sigreturn(struct sigcontext __user *sc, struct pt_regs *regs,
-	     struct switch_stack *sw)
-{
-	sigset_t set;
-
-	/* Verify that it's a good sigcontext before using it */
-	if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
-		goto give_sigsegv;
-	if (__get_user(set.sig[0], &sc->sc_mask))
-		goto give_sigsegv;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	set_current_blocked(&set);
-
-	if (restore_sigcontext(sc, regs, sw))
-		goto give_sigsegv;
-
-	/* Send SIGTRAP if we're single-stepping: */
-	if (ptrace_cancel_bpt (current)) {
-		siginfo_t info;
-
-		info.si_signo = SIGTRAP;
-		info.si_errno = 0;
-		info.si_code = TRAP_BRKPT;
-		info.si_addr = (void __user *) regs->pc;
-		info.si_trapno = 0;
-		send_sig_info(SIGTRAP, &info, current);
-	}
-	return;
-
-give_sigsegv:
-	force_sig(SIGSEGV, current);
-}
-
-asmlinkage void
-do_rt_sigreturn(struct rt_sigframe __user *frame, struct pt_regs *regs,
-		struct switch_stack *sw)
-{
-	sigset_t set;
-
-	/* Verify that it's a good ucontext_t before using it */
-	if (!access_ok(VERIFY_READ, &frame->uc, sizeof(frame->uc)))
-		goto give_sigsegv;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto give_sigsegv;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	set_current_blocked(&set);
-
-	if (restore_sigcontext(&frame->uc.uc_mcontext, regs, sw))
-		goto give_sigsegv;
-
-	/* Send SIGTRAP if we're single-stepping: */
-	if (ptrace_cancel_bpt (current)) {
-		siginfo_t info;
-
-		info.si_signo = SIGTRAP;
-		info.si_errno = 0;
-		info.si_code = TRAP_BRKPT;
-		info.si_addr = (void __user *) regs->pc;
-		info.si_trapno = 0;
-		send_sig_info(SIGTRAP, &info, current);
-	}
-	return;
-
-give_sigsegv:
-	force_sig(SIGSEGV, current);
-}
-
-
-/*
- * Set up a signal frame.
- */
-
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
-{
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	return (void __user *)((sp - frame_size) & -32ul);
-}
-
-static long
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, 
-		 struct switch_stack *sw, unsigned long mask, unsigned long sp)
-{
-	long i, err = 0;
-
-	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
-	err |= __put_user(mask, &sc->sc_mask);
-	err |= __put_user(regs->pc, &sc->sc_pc);
-	err |= __put_user(8, &sc->sc_ps);
-
-	err |= __put_user(regs->r0 , sc->sc_regs+0);
-	err |= __put_user(regs->r1 , sc->sc_regs+1);
-	err |= __put_user(regs->r2 , sc->sc_regs+2);
-	err |= __put_user(regs->r3 , sc->sc_regs+3);
-	err |= __put_user(regs->r4 , sc->sc_regs+4);
-	err |= __put_user(regs->r5 , sc->sc_regs+5);
-	err |= __put_user(regs->r6 , sc->sc_regs+6);
-	err |= __put_user(regs->r7 , sc->sc_regs+7);
-	err |= __put_user(regs->r8 , sc->sc_regs+8);
-	err |= __put_user(sw->r9   , sc->sc_regs+9);
-	err |= __put_user(sw->r10  , sc->sc_regs+10);
-	err |= __put_user(sw->r11  , sc->sc_regs+11);
-	err |= __put_user(sw->r12  , sc->sc_regs+12);
-	err |= __put_user(sw->r13  , sc->sc_regs+13);
-	err |= __put_user(sw->r14  , sc->sc_regs+14);
-	err |= __put_user(sw->r15  , sc->sc_regs+15);
-	err |= __put_user(regs->r16, sc->sc_regs+16);
-	err |= __put_user(regs->r17, sc->sc_regs+17);
-	err |= __put_user(regs->r18, sc->sc_regs+18);
-	err |= __put_user(regs->r19, sc->sc_regs+19);
-	err |= __put_user(regs->r20, sc->sc_regs+20);
-	err |= __put_user(regs->r21, sc->sc_regs+21);
-	err |= __put_user(regs->r22, sc->sc_regs+22);
-	err |= __put_user(regs->r23, sc->sc_regs+23);
-	err |= __put_user(regs->r24, sc->sc_regs+24);
-	err |= __put_user(regs->r25, sc->sc_regs+25);
-	err |= __put_user(regs->r26, sc->sc_regs+26);
-	err |= __put_user(regs->r27, sc->sc_regs+27);
-	err |= __put_user(regs->r28, sc->sc_regs+28);
-	err |= __put_user(regs->gp , sc->sc_regs+29);
-	err |= __put_user(sp, sc->sc_regs+30);
-	err |= __put_user(0, sc->sc_regs+31);
-
-	for (i = 0; i < 31; i++)
-		err |= __put_user(sw->fp[i], sc->sc_fpregs+i);
-	err |= __put_user(0, sc->sc_fpregs+31);
-	err |= __put_user(sw->fp[31], &sc->sc_fpcr);
-
-	err |= __put_user(regs->trap_a0, &sc->sc_traparg_a0);
-	err |= __put_user(regs->trap_a1, &sc->sc_traparg_a1);
-	err |= __put_user(regs->trap_a2, &sc->sc_traparg_a2);
-
-	return err;
-}
-
-static int
-setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
-	    struct pt_regs *regs, struct switch_stack * sw)
-{
-	unsigned long oldsp, r26, err = 0;
-	struct sigframe __user *frame;
-
-	oldsp = rdusp();
-	frame = get_sigframe(ka, oldsp, sizeof(*frame));
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	err |= setup_sigcontext(&frame->sc, regs, sw, set->sig[0], oldsp);
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->ka_restorer) {
-		r26 = (unsigned long) ka->ka_restorer;
-	} else {
-		err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
-		err |= __put_user(INSN_LDI_R0+__NR_sigreturn, frame->retcode+1);
-		err |= __put_user(INSN_CALLSYS, frame->retcode+2);
-		imb();
-		r26 = (unsigned long) frame->retcode;
-	}
-
-	/* Check that everything was written properly.  */
-	if (err)
-		goto give_sigsegv;
-
-	/* "Return" to the handler */
-	regs->r26 = r26;
-	regs->r27 = regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->r16 = sig;			/* a0: signal number */
-	regs->r17 = 0;				/* a1: exception code */
-	regs->r18 = (unsigned long) &frame->sc;	/* a2: sigcontext pointer */
-	wrusp((unsigned long) frame);
-	
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
-		current->comm, current->pid, frame, regs->pc, regs->r26);
-#endif
-
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
-}
-
-static int
-setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-	       sigset_t *set, struct pt_regs *regs, struct switch_stack * sw)
-{
-	unsigned long oldsp, r26, err = 0;
-	struct rt_sigframe __user *frame;
-
-	oldsp = rdusp();
-	frame = get_sigframe(ka, oldsp, sizeof(*frame));
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(set->sig[0], &frame->uc.uc_osf_sigmask);
-	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(oldsp), &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, sw,
-				set->sig[0], oldsp);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->ka_restorer) {
-		r26 = (unsigned long) ka->ka_restorer;
-	} else {
-		err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
-		err |= __put_user(INSN_LDI_R0+__NR_rt_sigreturn,
-				  frame->retcode+1);
-		err |= __put_user(INSN_CALLSYS, frame->retcode+2);
-		imb();
-		r26 = (unsigned long) frame->retcode;
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* "Return" to the handler */
-	regs->r26 = r26;
-	regs->r27 = regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->r16 = sig;			  /* a0: signal number */
-	regs->r17 = (unsigned long) &frame->info; /* a1: siginfo pointer */
-	regs->r18 = (unsigned long) &frame->uc;	  /* a2: ucontext pointer */
-	wrusp((unsigned long) frame);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
-		current->comm, current->pid, frame, regs->pc, regs->r26);
-#endif
-
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
-}
-
-
-/*
- * OK, we're invoking a handler.
- */
-static inline int
-handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-	      sigset_t *oldset, struct pt_regs * regs, struct switch_stack *sw)
-{
-	int ret;
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(sig, ka, info, oldset, regs, sw);
-	else
-		ret = setup_frame(sig, ka, oldset, regs, sw);
-
-	if (ret == 0)
-		block_sigmask(ka, sig);
-
-	return ret;
-}
-
-static inline void
-syscall_restart(unsigned long r0, unsigned long r19,
-		struct pt_regs *regs, struct k_sigaction *ka)
-{
-	switch (regs->r0) {
-	case ERESTARTSYS:
-		if (!(ka->sa.sa_flags & SA_RESTART)) {
-		case ERESTARTNOHAND:
-			regs->r0 = EINTR;
-			break;
-		}
-		/* fallthrough */
-	case ERESTARTNOINTR:
-		regs->r0 = r0;	/* reset v0 and a3 and replay syscall */
-		regs->r19 = r19;
-		regs->pc -= 4;
-		break;
-	case ERESTART_RESTARTBLOCK:
-		regs->r0 = EINTR;
-		break;
-	}
-}
-
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- *
- * "r0" and "r19" are the registers we need to restore for system call
- * restart. "r0" is also used as an indicator whether we can restart at
- * all (if we get here from anything but a syscall return, it will be 0)
- */
-static void
-do_signal(struct pt_regs * regs, struct switch_stack * sw,
-	  unsigned long r0, unsigned long r19)
-{
-	siginfo_t info;
-	int signr;
-	unsigned long single_stepping = ptrace_cancel_bpt(current);
-	struct k_sigaction ka;
-	sigset_t *oldset;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	/* This lets the debugger run, ... */
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-
-	/* ... so re-check the single stepping. */
-	single_stepping |= ptrace_cancel_bpt(current);
-
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		if (r0)
-			syscall_restart(r0, r19, regs, &ka);
-		if (handle_signal(signr, &ka, &info, oldset, regs, sw) == 0) {
-			/* A signal was successfully delivered, and the
-			   saved sigmask was stored on the signal frame,
-			   and will be restored by sigreturn.  So we can
-			   simply clear the restore sigmask flag.  */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-		if (single_stepping) 
-			ptrace_set_bpt(current); /* re-set bpt */
-		return;
-	}
-
-	if (r0) {
-	  	switch (regs->r0) {
-		case ERESTARTNOHAND:
-		case ERESTARTSYS:
-		case ERESTARTNOINTR:
-			/* Reset v0 and a3 and replay syscall.  */
-			regs->r0 = r0;
-			regs->r19 = r19;
-			regs->pc -= 4;
-			break;
-		case ERESTART_RESTARTBLOCK:
-			/* Force v0 to the restart syscall and reply.  */
-			regs->r0 = __NR_restart_syscall;
-			regs->pc -= 4;
-			break;
-		}
-	}
-
-	/* If there's no signal to deliver, we just restore the saved mask.  */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-
-	if (single_stepping)
-		ptrace_set_bpt(current);	/* re-set breakpoint */
-}
-
-void
-do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
-		 unsigned long thread_info_flags,
-		 unsigned long r0, unsigned long r19)
-{
-	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
-		do_signal(regs, sw, r0, r19);
-
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-		if (current->replacement_session_keyring)
-			key_replace_session_keyring();
-	}
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/smc37c669.c b/ANDROID_3.4.5/arch/alpha/kernel/smc37c669.c
deleted file mode 100644
index 0435921d..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/smc37c669.c
+++ /dev/null
@@ -1,2553 +0,0 @@
-/*
- * SMC 37C669 initialization code
- */
-#include <linux/kernel.h>
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-
-#include <asm/hwrpb.h>
-#include <asm/io.h>
-#include <asm/segment.h>
-
-#if 0
-# define DBG_DEVS(args)         printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#define KB              1024
-#define MB              (1024*KB)
-#define GB              (1024*MB)
-
-#define SMC_DEBUG   0
-
-/* File:	smcc669_def.h
- *
- * Copyright (C) 1997 by
- * Digital Equipment Corporation, Maynard, Massachusetts.
- * All rights reserved.
- *
- * This software is furnished under a license and may be used and copied
- * only  in  accordance  of  the  terms  of  such  license  and with the
- * inclusion of the above copyright notice. This software or  any  other
- * copies thereof may not be provided or otherwise made available to any
- * other person.  No title to and  ownership of the  software is  hereby
- * transferred.
- *
- * The information in this software is  subject to change without notice
- * and  should  not  be  construed  as a commitment by Digital Equipment
- * Corporation.
- *
- * Digital assumes no responsibility for the use  or  reliability of its
- * software on equipment which is not supplied by Digital.
- *
- *
- * Abstract:	
- *
- *	This file contains header definitions for the SMC37c669 
- *	Super I/O controller. 
- *
- * Author:	
- *
- *	Eric Rasmussen
- *
- * Modification History:
- *
- *	er	28-Jan-1997	Initial Entry
- */
-
-#ifndef __SMC37c669_H
-#define __SMC37c669_H
-
-/*
-** Macros for handling device IRQs
-**
-** The mask acts as a flag used in mapping actual ISA IRQs (0 - 15) 
-** to device IRQs (A - H).
-*/
-#define SMC37c669_DEVICE_IRQ_MASK	0x80000000
-#define SMC37c669_DEVICE_IRQ( __i )	\
-	((SMC37c669_DEVICE_IRQ_MASK) | (__i))
-#define SMC37c669_IS_DEVICE_IRQ(__i)	\
-	(((__i) & (SMC37c669_DEVICE_IRQ_MASK)) == (SMC37c669_DEVICE_IRQ_MASK))
-#define SMC37c669_RAW_DEVICE_IRQ(__i)	\
-	((__i) & ~(SMC37c669_DEVICE_IRQ_MASK))
-
-/*
-** Macros for handling device DRQs
-**
-** The mask acts as a flag used in mapping actual ISA DMA
-** channels to device DMA channels (A - C).
-*/
-#define SMC37c669_DEVICE_DRQ_MASK	0x80000000
-#define SMC37c669_DEVICE_DRQ(__d)	\
-	((SMC37c669_DEVICE_DRQ_MASK) | (__d))
-#define SMC37c669_IS_DEVICE_DRQ(__d)	\
-	(((__d) & (SMC37c669_DEVICE_DRQ_MASK)) == (SMC37c669_DEVICE_DRQ_MASK))
-#define SMC37c669_RAW_DEVICE_DRQ(__d)	\
-	((__d) & ~(SMC37c669_DEVICE_DRQ_MASK))
-
-#define SMC37c669_DEVICE_ID	0x3
-
-/*
-** SMC37c669 Device Function Definitions
-*/
-#define SERIAL_0	0
-#define SERIAL_1	1
-#define PARALLEL_0	2
-#define FLOPPY_0	3
-#define IDE_0		4
-#define NUM_FUNCS	5
-
-/*
-** Default Device Function Mappings
-*/
-#define COM1_BASE	0x3F8
-#define COM1_IRQ	4
-#define COM2_BASE	0x2F8
-#define COM2_IRQ	3
-#define PARP_BASE	0x3BC
-#define PARP_IRQ	7
-#define PARP_DRQ	3
-#define FDC_BASE	0x3F0
-#define FDC_IRQ		6
-#define FDC_DRQ		2
-
-/*
-** Configuration On/Off Key Definitions
-*/
-#define SMC37c669_CONFIG_ON_KEY		0x55
-#define SMC37c669_CONFIG_OFF_KEY	0xAA
-
-/*
-** SMC 37c669 Device IRQs
-*/
-#define SMC37c669_DEVICE_IRQ_A	    ( SMC37c669_DEVICE_IRQ( 0x01 ) )
-#define SMC37c669_DEVICE_IRQ_B	    ( SMC37c669_DEVICE_IRQ( 0x02 ) )
-#define SMC37c669_DEVICE_IRQ_C	    ( SMC37c669_DEVICE_IRQ( 0x03 ) )
-#define SMC37c669_DEVICE_IRQ_D	    ( SMC37c669_DEVICE_IRQ( 0x04 ) )
-#define SMC37c669_DEVICE_IRQ_E	    ( SMC37c669_DEVICE_IRQ( 0x05 ) )
-#define SMC37c669_DEVICE_IRQ_F	    ( SMC37c669_DEVICE_IRQ( 0x06 ) )
-/*      SMC37c669_DEVICE_IRQ_G	    *** RESERVED ***/
-#define SMC37c669_DEVICE_IRQ_H	    ( SMC37c669_DEVICE_IRQ( 0x08 ) )
-
-/*
-** SMC 37c669 Device DMA Channel Definitions
-*/
-#define SMC37c669_DEVICE_DRQ_A		    ( SMC37c669_DEVICE_DRQ( 0x01 ) )
-#define SMC37c669_DEVICE_DRQ_B		    ( SMC37c669_DEVICE_DRQ( 0x02 ) )
-#define SMC37c669_DEVICE_DRQ_C		    ( SMC37c669_DEVICE_DRQ( 0x03 ) )
-
-/*
-** Configuration Register Index Definitions
-*/
-#define SMC37c669_CR00_INDEX	    0x00
-#define SMC37c669_CR01_INDEX	    0x01
-#define SMC37c669_CR02_INDEX	    0x02
-#define SMC37c669_CR03_INDEX	    0x03
-#define SMC37c669_CR04_INDEX	    0x04
-#define SMC37c669_CR05_INDEX	    0x05
-#define SMC37c669_CR06_INDEX	    0x06
-#define SMC37c669_CR07_INDEX	    0x07
-#define SMC37c669_CR08_INDEX	    0x08
-#define SMC37c669_CR09_INDEX	    0x09
-#define SMC37c669_CR0A_INDEX	    0x0A
-#define SMC37c669_CR0B_INDEX	    0x0B
-#define SMC37c669_CR0C_INDEX	    0x0C
-#define SMC37c669_CR0D_INDEX	    0x0D
-#define SMC37c669_CR0E_INDEX	    0x0E
-#define SMC37c669_CR0F_INDEX	    0x0F
-#define SMC37c669_CR10_INDEX	    0x10
-#define SMC37c669_CR11_INDEX	    0x11
-#define SMC37c669_CR12_INDEX	    0x12
-#define SMC37c669_CR13_INDEX	    0x13
-#define SMC37c669_CR14_INDEX	    0x14
-#define SMC37c669_CR15_INDEX	    0x15
-#define SMC37c669_CR16_INDEX	    0x16
-#define SMC37c669_CR17_INDEX	    0x17
-#define SMC37c669_CR18_INDEX	    0x18
-#define SMC37c669_CR19_INDEX	    0x19
-#define SMC37c669_CR1A_INDEX	    0x1A
-#define SMC37c669_CR1B_INDEX	    0x1B
-#define SMC37c669_CR1C_INDEX	    0x1C
-#define SMC37c669_CR1D_INDEX	    0x1D
-#define SMC37c669_CR1E_INDEX	    0x1E
-#define SMC37c669_CR1F_INDEX	    0x1F
-#define SMC37c669_CR20_INDEX	    0x20
-#define SMC37c669_CR21_INDEX	    0x21
-#define SMC37c669_CR22_INDEX	    0x22
-#define SMC37c669_CR23_INDEX	    0x23
-#define SMC37c669_CR24_INDEX	    0x24
-#define SMC37c669_CR25_INDEX	    0x25
-#define SMC37c669_CR26_INDEX	    0x26
-#define SMC37c669_CR27_INDEX	    0x27
-#define SMC37c669_CR28_INDEX	    0x28
-#define SMC37c669_CR29_INDEX	    0x29
-
-/*
-** Configuration Register Alias Definitions
-*/
-#define SMC37c669_DEVICE_ID_INDEX		    SMC37c669_CR0D_INDEX
-#define SMC37c669_DEVICE_REVISION_INDEX		    SMC37c669_CR0E_INDEX
-#define SMC37c669_FDC_BASE_ADDRESS_INDEX	    SMC37c669_CR20_INDEX
-#define SMC37c669_IDE_BASE_ADDRESS_INDEX	    SMC37c669_CR21_INDEX
-#define SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX	    SMC37c669_CR22_INDEX
-#define SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX	    SMC37c669_CR23_INDEX
-#define SMC37c669_SERIAL0_BASE_ADDRESS_INDEX	    SMC37c669_CR24_INDEX
-#define SMC37c669_SERIAL1_BASE_ADDRESS_INDEX	    SMC37c669_CR25_INDEX
-#define SMC37c669_PARALLEL_FDC_DRQ_INDEX	    SMC37c669_CR26_INDEX
-#define SMC37c669_PARALLEL_FDC_IRQ_INDEX	    SMC37c669_CR27_INDEX
-#define SMC37c669_SERIAL_IRQ_INDEX		    SMC37c669_CR28_INDEX
-
-/*
-** Configuration Register Definitions
-**
-** The INDEX (write only) and DATA (read/write) ports are effective 
-** only when the chip is in the Configuration State.
-*/
-typedef struct _SMC37c669_CONFIG_REGS {
-    unsigned char index_port;
-    unsigned char data_port;
-} SMC37c669_CONFIG_REGS;
-
-/*
-** CR00 - default value 0x28
-**
-**  IDE_EN (CR00<1:0>):
-**	0x - 30ua pull-ups on nIDEEN, nHDCS0, NHDCS1
-**	11 - IRQ_H available as IRQ output,
-**	     IRRX2, IRTX2 available as alternate IR pins
-**	10 - nIDEEN, nHDCS0, nHDCS1 used to control IDE
-**
-**  VALID (CR00<7>):
-**	A high level on this software controlled bit can
-**	be used to indicate that a valid configuration
-**	cycle has occurred.  The control software must
-**	take care to set this bit at the appropriate times.
-**	Set to zero after power up.  This bit has no
-**	effect on any other hardware in the chip.
-**
-*/
-typedef union _SMC37c669_CR00 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned ide_en : 2;	    /* See note above		*/
-	unsigned reserved1 : 1;	    /* RAZ			*/
-	unsigned fdc_pwr : 1;	    /* 1 = supply power to FDC  */
-	unsigned reserved2 : 3;	    /* Read as 010b		*/
-	unsigned valid : 1;	    /* See note above		*/
-    }	by_field;
-} SMC37c669_CR00;
-
-/*
-** CR01 - default value 0x9C
-*/
-typedef union _SMC37c669_CR01 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned reserved1 : 2;	    /* RAZ			    */
-	unsigned ppt_pwr : 1;	    /* 1 = supply power to PPT	    */
-	unsigned ppt_mode : 1;	    /* 1 = Printer mode, 0 = EPP    */
-	unsigned reserved2 : 1;	    /* Read as 1		    */
-	unsigned reserved3 : 2;	    /* RAZ			    */
-	unsigned lock_crx: 1;	    /* Lock CR00 - CR18		    */
-    }	by_field;
-} SMC37c669_CR01;
-
-/*
-** CR02 - default value 0x88
-*/
-typedef union _SMC37c669_CR02 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned reserved1 : 3;	    /* RAZ			    */
-	unsigned uart1_pwr : 1;	    /* 1 = supply power to UART1    */
-	unsigned reserved2 : 3;	    /* RAZ			    */
-	unsigned uart2_pwr : 1;	    /* 1 = supply power to UART2    */
-    }	by_field;
-} SMC37c669_CR02;
-
-/*
-** CR03 - default value 0x78
-**
-**  CR03<7>	CR03<2>	    Pin 94
-**  -------	-------	    ------
-**     0	   X	    DRV2 (input)
-**     1	   0	    ADRX
-**     1	   1	    IRQ_B
-**
-**  CR03<6>	CR03<5>	    Op Mode
-**  -------	-------	    -------
-**     0	   0	    Model 30
-**     0	   1	    PS/2
-**     1	   0	    Reserved
-**     1	   1	    AT Mode
-*/
-typedef union _SMC37c669_CR03 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned pwrgd_gamecs : 1;  /* 1 = PWRGD, 0 = GAMECS	    */
-	unsigned fdc_mode2 : 1;	    /* 1 = Enhanced Mode 2	    */
-	unsigned pin94_0 : 1;	    /* See note above		    */
-	unsigned reserved1 : 1;	    /* RAZ			    */
-	unsigned drvden : 1;	    /* 1 = high, 0 - output	    */
-	unsigned op_mode : 2;	    /* See note above		    */
-	unsigned pin94_1 : 1;	    /* See note above		    */
-    }	by_field;
-} SMC37c669_CR03;
-
-/*
-** CR04 - default value 0x00
-**
-**  PP_EXT_MODE:
-**	If CR01<PP_MODE> = 0 and PP_EXT_MODE =
-**	    00 - Standard and Bidirectional
-**	    01 - EPP mode and SPP
-**	    10 - ECP mode
-**		 In this mode, 2 drives can be supported
-**		 directly, 3 or 4 drives must use external
-**		 4 drive support.  SPP can be selected
-**		 through the ECR register of ECP as mode 000.
-**	    11 - ECP mode and EPP mode
-**		 In this mode, 2 drives can be supported
-**		 directly, 3 or 4 drives must use external
-**		 4 drive support.  SPP can be selected
-**		 through the ECR register of ECP as mode 000.
-**		 In this mode, EPP can be selected through
-**		 the ECR register of ECP as mode 100.
-**
-**  PP_FDC:
-**	00 - Normal
-**	01 - PPFD1
-**	10 - PPFD2
-**	11 - Reserved
-**
-**  MIDI1:
-**	Serial Clock Select: 
-**	    A low level on this bit disables MIDI support,
-**	    clock = divide by 13.  A high level on this 
-**	    bit enables MIDI support, clock = divide by 12.
-**
-**	MIDI operates at 31.25 Kbps which can be derived 
-**	from 125 KHz (24 MHz / 12 = 2 MHz, 2 MHz / 16 = 125 KHz)
-**
-**  ALT_IO:
-**	0 - Use pins IRRX, IRTX
-**	1 - Use pins IRRX2, IRTX2
-**
-**	If this bit is set, the IR receive and transmit
-**	functions will not be available on pins 25 and 26
-**	unless CR00<IDE_EN> = 11.
-*/
-typedef union _SMC37c669_CR04 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned ppt_ext_mode : 2;  /* See note above		    */
-	unsigned ppt_fdc : 2;	    /* See note above		    */
-	unsigned midi1 : 1;	    /* See note above		    */
-	unsigned midi2 : 1;	    /* See note above		    */
-	unsigned epp_type : 1;	    /* 0 = EPP 1.9, 1 = EPP 1.7	    */
-	unsigned alt_io : 1;	    /* See note above		    */
-    }	by_field;
-} SMC37c669_CR04;
-
-/*
-** CR05 - default value 0x00
-**
-**  DEN_SEL:
-**	00 - Densel output normal
-**	01 - Reserved
-**	10 - Densel output 1
-**	11 - Densel output 0
-**
-*/
-typedef union _SMC37c669_CR05 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned reserved1 : 2;	    /* RAZ					*/
-	unsigned fdc_dma_mode : 1;  /* 0 = burst, 1 = non-burst			*/
-	unsigned den_sel : 2;	    /* See note above				*/
-	unsigned swap_drv : 1;	    /* Swap the FDC motor selects		*/
-	unsigned extx4 : 1;	    /* 0 = 2 drive, 1 = external 4 drive decode	*/
-	unsigned reserved2 : 1;	    /* RAZ					*/
-    }	by_field;
-} SMC37c669_CR05;
-
-/*
-** CR06 - default value 0xFF
-*/
-typedef union _SMC37c669_CR06 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned floppy_a : 2;	    /* Type of floppy drive A	    */
-	unsigned floppy_b : 2;	    /* Type of floppy drive B	    */
-	unsigned floppy_c : 2;	    /* Type of floppy drive C	    */
-	unsigned floppy_d : 2;	    /* Type of floppy drive D	    */
-    }	by_field;
-} SMC37c669_CR06;
-
-/*
-** CR07 - default value 0x00
-**
-**  Auto Power Management CR07<7:4>:
-**	0 - Auto Powerdown disabled (default)
-**	1 - Auto Powerdown enabled
-**
-**	This bit is reset to the default state by POR or
-**	a hardware reset.
-**
-*/
-typedef union _SMC37c669_CR07 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned floppy_boot : 2;   /* 0 = A:, 1 = B:		    */
-	unsigned reserved1 : 2;	    /* RAZ			    */
-	unsigned ppt_en : 1;	    /* See note above		    */
-	unsigned uart1_en : 1;	    /* See note above		    */
-	unsigned uart2_en : 1;	    /* See note above		    */
-	unsigned fdc_en : 1;	    /* See note above		    */
-    }	by_field;
-} SMC37c669_CR07;
-
-/*
-** CR08 - default value 0x00
-*/
-typedef union _SMC37c669_CR08 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned zero : 4;	    /* 0			    */
-	unsigned addrx7_4 : 4;	    /* ADR<7:3> for ADRx decode	    */
-    }	by_field;
-} SMC37c669_CR08;
-
-/*
-** CR09 - default value 0x00
-**
-**  ADRx_CONFIG:
-**	00 - ADRx disabled
-**	01 - 1 byte decode A<3:0> = 0000b
-**	10 - 8 byte block decode A<3:0> = 0XXXb
-**	11 - 16 byte block decode A<3:0> = XXXXb
-**
-*/
-typedef union _SMC37c669_CR09 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned adra8 : 3;	    /* ADR<10:8> for ADRx decode    */
-	unsigned reserved1 : 3;
-	unsigned adrx_config : 2;   /* See note above		    */
-    }	by_field;
-} SMC37c669_CR09;
-
-/*
-** CR0A - default value 0x00
-*/
-typedef union _SMC37c669_CR0A {
-    unsigned char as_uchar;
-    struct {
-    	unsigned ecp_fifo_threshold : 4;
-	unsigned reserved1 : 4;
-    }	by_field;
-} SMC37c669_CR0A;
-
-/*
-** CR0B - default value 0x00
-*/
-typedef union _SMC37c669_CR0B {
-    unsigned char as_uchar;
-    struct {
-    	unsigned fdd0_drtx : 2;	    /* FDD0 Data Rate Table	    */
-	unsigned fdd1_drtx : 2;	    /* FDD1 Data Rate Table	    */
-	unsigned fdd2_drtx : 2;	    /* FDD2 Data Rate Table	    */
-	unsigned fdd3_drtx : 2;	    /* FDD3 Data Rate Table	    */
-    }	by_field;
-} SMC37c669_CR0B;
-
-/*
-** CR0C - default value 0x00
-**
-**  UART2_MODE:
-**	000 - Standard (default)
-**	001 - IrDA (HPSIR)
-**	010 - Amplitude Shift Keyed IR @500 KHz
-**	011 - Reserved
-**	1xx - Reserved
-**
-*/
-typedef union _SMC37c669_CR0C {
-    unsigned char as_uchar;
-    struct {
-    	unsigned uart2_rcv_polarity : 1;    /* 1 = invert RX		*/
-	unsigned uart2_xmit_polarity : 1;   /* 1 = invert TX		*/
-	unsigned uart2_duplex : 1;	    /* 1 = full, 0 = half	*/
-	unsigned uart2_mode : 3;	    /* See note above		*/
-	unsigned uart1_speed : 1;	    /* 1 = high speed enabled	*/
-	unsigned uart2_speed : 1;	    /* 1 = high speed enabled	*/
-    }	by_field;
-} SMC37c669_CR0C;
-
-/*
-** CR0D - default value 0x03
-**
-**  Device ID Register - read only
-*/
-typedef union _SMC37c669_CR0D {
-    unsigned char as_uchar;
-    struct {
-    	unsigned device_id : 8;	    /* Returns 0x3 in this field    */
-    }	by_field;
-} SMC37c669_CR0D;
-
-/*
-** CR0E - default value 0x02
-**
-**  Device Revision Register - read only
-*/
-typedef union _SMC37c669_CR0E {
-    unsigned char as_uchar;
-    struct {
-    	unsigned device_rev : 8;    /* Returns 0x2 in this field    */
-    }	by_field;
-} SMC37c669_CR0E;
-
-/*
-** CR0F - default value 0x00
-*/
-typedef union _SMC37c669_CR0F {
-    unsigned char as_uchar;
-    struct {
-    	unsigned test0 : 1;	    /* Reserved - set to 0	    */
-	unsigned test1 : 1;	    /* Reserved - set to 0	    */
-	unsigned test2 : 1;	    /* Reserved - set to 0	    */
-	unsigned test3 : 1;	    /* Reserved - set t0 0	    */
-	unsigned test4 : 1;	    /* Reserved - set to 0	    */
-	unsigned test5 : 1;	    /* Reserved - set t0 0	    */
-	unsigned test6 : 1;	    /* Reserved - set t0 0	    */
-	unsigned test7 : 1;	    /* Reserved - set to 0	    */
-    }	by_field;
-} SMC37c669_CR0F;
-
-/*
-** CR10 - default value 0x00
-*/
-typedef union _SMC37c669_CR10 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned reserved1 : 3;	     /* RAZ			    */
-	unsigned pll_gain : 1;	     /* 1 = 3V, 2 = 5V operation    */
-	unsigned pll_stop : 1;	     /* 1 = stop PLLs		    */
-	unsigned ace_stop : 1;	     /* 1 = stop UART clocks	    */
-	unsigned pll_clock_ctrl : 1; /* 0 = 14.318 MHz, 1 = 24 MHz  */
-	unsigned ir_test : 1;	     /* Enable IR test mode	    */
-    }	by_field;
-} SMC37c669_CR10;
-
-/*
-** CR11 - default value 0x00
-*/
-typedef union _SMC37c669_CR11 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned ir_loopback : 1;   /* Internal IR loop back		    */
-	unsigned test_10ms : 1;	    /* Test 10ms autopowerdown FDC timeout  */
-	unsigned reserved1 : 6;	    /* RAZ				    */
-    }	by_field;
-} SMC37c669_CR11;
-
-/*
-** CR12 - CR1D are reserved registers
-*/
-
-/*
-** CR1E - default value 0x80
-**
-**  GAMECS:
-**	00 - GAMECS disabled
-**	01 - 1 byte decode ADR<3:0> = 0001b
-**	10 - 8 byte block decode ADR<3:0> = 0XXXb
-**	11 - 16 byte block decode ADR<3:0> = XXXXb
-**
-*/
-typedef union _SMC37c66_CR1E {
-    unsigned char as_uchar;
-    struct {
-    	unsigned gamecs_config: 2;   /* See note above		    */
-	unsigned gamecs_addr9_4 : 6; /* GAMECS Addr<9:4>	    */
-    }	by_field;
-} SMC37c669_CR1E;
-
-/*
-** CR1F - default value 0x00
-**
-**  DT0 DT1 DRVDEN0 DRVDEN1 Drive Type
-**  --- --- ------- ------- ----------
-**   0   0  DENSEL  DRATE0  4/2/1 MB 3.5"
-**                          2/1 MB 5.25"
-**                          2/1.6/1 MB 3.5" (3-mode)
-**   0   1  DRATE1  DRATE0
-**   1   0  nDENSEL DRATE0  PS/2
-**   1   1  DRATE0  DRATE1
-**
-**  Note: DENSEL, DRATE1, and DRATE0 map onto two output
-**	  pins - DRVDEN0 and DRVDEN1.
-**
-*/
-typedef union _SMC37c669_CR1F {
-    unsigned char as_uchar;
-    struct {
-    	unsigned fdd0_drive_type : 2;	/* FDD0 drive type	    */
-	unsigned fdd1_drive_type : 2;	/* FDD1 drive type	    */
-	unsigned fdd2_drive_type : 2;	/* FDD2 drive type	    */
-	unsigned fdd3_drive_type : 2;	/* FDD3 drive type	    */
-    }	by_field;
-} SMC37c669_CR1F;
-
-/*
-** CR20 - default value 0x3C
-**
-**  FDC Base Address Register
-**	- To disable this decode set Addr<9:8> = 0
-**	- A<10> = 0, A<3:0> = 0XXXb to access.
-**
-*/
-typedef union _SMC37c669_CR20 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned zero : 2;	    /* 0			    */
-	unsigned addr9_4 : 6;	    /* FDC Addr<9:4>		    */
-    }	by_field;
-} SMC37c669_CR20;
-
-/*
-** CR21 - default value 0x3C
-**
-**  IDE Base Address Register
-**	- To disable this decode set Addr<9:8> = 0
-**	- A<10> = 0, A<3:0> = 0XXXb to access.
-**
-*/
-typedef union _SMC37c669_CR21 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned zero : 2;	    /* 0			    */
-	unsigned addr9_4 : 6;	    /* IDE Addr<9:4>		    */
-    }	by_field;
-} SMC37c669_CR21;
-
-/*
-** CR22 - default value 0x3D
-**
-**  IDE Alternate Status Base Address Register
-**	- To disable this decode set Addr<9:8> = 0
-**	- A<10> = 0, A<3:0> = 0110b to access.
-**
-*/
-typedef union _SMC37c669_CR22 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned zero : 2;	    /* 0			    */
-	unsigned addr9_4 : 6;	    /* IDE Alt Status Addr<9:4>	    */
-    }	by_field;
-} SMC37c669_CR22;
-
-/*
-** CR23 - default value 0x00
-**
-**  Parallel Port Base Address Register
-**	- To disable this decode set Addr<9:8> = 0
-**	- A<10> = 0 to access.
-**	- If EPP is enabled, A<2:0> = XXXb to access.
-**	  If EPP is NOT enabled, A<1:0> = XXb to access
-**
-*/
-typedef union _SMC37c669_CR23 {
-    unsigned char as_uchar;
-    struct {
-	unsigned addr9_2 : 8;	    /* Parallel Port Addr<9:2>	    */
-    }	by_field;
-} SMC37c669_CR23;
-
-/*
-** CR24 - default value 0x00
-**
-**  UART1 Base Address Register
-**	- To disable this decode set Addr<9:8> = 0
-**	- A<10> = 0, A<2:0> = XXXb to access.
-**
-*/
-typedef union _SMC37c669_CR24 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned zero : 1;	    /* 0			    */
-	unsigned addr9_3 : 7;	    /* UART1 Addr<9:3>		    */
-    }	by_field;
-} SMC37c669_CR24;
-
-/*
-** CR25 - default value 0x00
-**
-**  UART2 Base Address Register
-**	- To disable this decode set Addr<9:8> = 0
-**	- A<10> = 0, A<2:0> = XXXb to access.
-**
-*/
-typedef union _SMC37c669_CR25 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned zero : 1;	    /* 0			    */
-	unsigned addr9_3 : 7;	    /* UART2 Addr<9:3>		    */
-    }	by_field;
-} SMC37c669_CR25;
-
-/*
-** CR26 - default value 0x00
-**
-**  Parallel Port / FDC DMA Select Register
-**
-**  D3 - D0	  DMA
-**  D7 - D4	Selected
-**  -------	--------
-**   0000	 None
-**   0001	 DMA_A
-**   0010	 DMA_B
-**   0011	 DMA_C
-**
-*/
-typedef union _SMC37c669_CR26 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned ppt_drq : 4;	    /* See note above		    */
-	unsigned fdc_drq : 4;	    /* See note above		    */
-    }	by_field;
-} SMC37c669_CR26;
-
-/*
-** CR27 - default value 0x00
-**
-**  Parallel Port / FDC IRQ Select Register
-**
-**  D3 - D0	  IRQ
-**  D7 - D4	Selected
-**  -------	--------
-**   0000	 None
-**   0001	 IRQ_A
-**   0010	 IRQ_B
-**   0011	 IRQ_C
-**   0100	 IRQ_D
-**   0101	 IRQ_E
-**   0110	 IRQ_F
-**   0111	 Reserved
-**   1000	 IRQ_H
-**
-**  Any unselected IRQ REQ is in tristate
-**
-*/
-typedef union _SMC37c669_CR27 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned ppt_irq : 4;	    /* See note above		    */
-	unsigned fdc_irq : 4;	    /* See note above		    */
-    }	by_field;
-} SMC37c669_CR27;
-
-/*
-** CR28 - default value 0x00
-**
-**  UART IRQ Select Register
-**
-**  D3 - D0	  IRQ
-**  D7 - D4	Selected
-**  -------	--------
-**   0000	 None
-**   0001	 IRQ_A
-**   0010	 IRQ_B
-**   0011	 IRQ_C
-**   0100	 IRQ_D
-**   0101	 IRQ_E
-**   0110	 IRQ_F
-**   0111	 Reserved
-**   1000	 IRQ_H
-**   1111	 share with UART1 (only for UART2)
-**
-**  Any unselected IRQ REQ is in tristate
-**
-**  To share an IRQ between UART1 and UART2, set
-**  UART1 to use the desired IRQ and set UART2 to
-**  0xF to enable sharing mechanism.
-**
-*/
-typedef union _SMC37c669_CR28 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned uart2_irq : 4;	    /* See note above		    */
-	unsigned uart1_irq : 4;	    /* See note above		    */
-    }	by_field;
-} SMC37c669_CR28;
-
-/*
-** CR29 - default value 0x00
-**
-**  IRQIN IRQ Select Register
-**
-**  D3 - D0	  IRQ
-**  D7 - D4	Selected
-**  -------	--------
-**   0000	 None
-**   0001	 IRQ_A
-**   0010	 IRQ_B
-**   0011	 IRQ_C
-**   0100	 IRQ_D
-**   0101	 IRQ_E
-**   0110	 IRQ_F
-**   0111	 Reserved
-**   1000	 IRQ_H
-**
-**  Any unselected IRQ REQ is in tristate
-**
-*/
-typedef union _SMC37c669_CR29 {
-    unsigned char as_uchar;
-    struct {
-    	unsigned irqin_irq : 4;	    /* See note above		    */
-	unsigned reserved1 : 4;	    /* RAZ			    */
-    }	by_field;
-} SMC37c669_CR29;
-
-/*
-** Aliases of Configuration Register formats (should match
-** the set of index aliases).
-**
-** Note that CR24 and CR25 have the same format and are the
-** base address registers for UART1 and UART2.  Because of
-** this we only define 1 alias here - for CR24 - as the serial
-** base address register.
-**
-** Note that CR21 and CR22 have the same format and are the
-** base address and alternate status address registers for
-** the IDE controller.  Because of this we only define 1 alias
-** here - for CR21 - as the IDE address register.
-**
-*/
-typedef SMC37c669_CR0D SMC37c669_DEVICE_ID_REGISTER;
-typedef SMC37c669_CR0E SMC37c669_DEVICE_REVISION_REGISTER;
-typedef SMC37c669_CR20 SMC37c669_FDC_BASE_ADDRESS_REGISTER;
-typedef SMC37c669_CR21 SMC37c669_IDE_ADDRESS_REGISTER;
-typedef SMC37c669_CR23 SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER;
-typedef SMC37c669_CR24 SMC37c669_SERIAL_BASE_ADDRESS_REGISTER;
-typedef SMC37c669_CR26 SMC37c669_PARALLEL_FDC_DRQ_REGISTER;
-typedef SMC37c669_CR27 SMC37c669_PARALLEL_FDC_IRQ_REGISTER;
-typedef SMC37c669_CR28 SMC37c669_SERIAL_IRQ_REGISTER;
-
-/*
-** ISA/Device IRQ Translation Table Entry Definition
-*/
-typedef struct _SMC37c669_IRQ_TRANSLATION_ENTRY {
-    int device_irq;
-    int isa_irq;
-} SMC37c669_IRQ_TRANSLATION_ENTRY;
-
-/*
-** ISA/Device DMA Translation Table Entry Definition
-*/
-typedef struct _SMC37c669_DRQ_TRANSLATION_ENTRY {
-    int device_drq;
-    int isa_drq;
-} SMC37c669_DRQ_TRANSLATION_ENTRY;
-
-/*
-** External Interface Function Prototype Declarations
-*/
-
-SMC37c669_CONFIG_REGS *SMC37c669_detect( 
-    int
-);
-
-unsigned int SMC37c669_enable_device( 
-    unsigned int func 
-);
-
-unsigned int SMC37c669_disable_device( 
-    unsigned int func 
-);
-
-unsigned int SMC37c669_configure_device( 
-    unsigned int func, 
-    int port, 
-    int irq, 
-    int drq 
-);
-
-void SMC37c669_display_device_info( 
-    void 
-);
-
-#endif	/* __SMC37c669_H */
-
-/* file:	smcc669.c
- *
- * Copyright (C) 1997 by
- * Digital Equipment Corporation, Maynard, Massachusetts.
- * All rights reserved.
- *
- * This software is furnished under a license and may be used and copied
- * only  in  accordance  of  the  terms  of  such  license  and with the
- * inclusion of the above copyright notice. This software or  any  other
- * copies thereof may not be provided or otherwise made available to any
- * other person.  No title to and  ownership of the  software is  hereby
- * transferred.
- *
- * The information in this software is  subject to change without notice
- * and  should  not  be  construed  as a commitment by digital equipment
- * corporation.
- *
- * Digital assumes no responsibility for the use  or  reliability of its
- * software on equipment which is not supplied by digital.
- */
-
-/*
- *++
- *  FACILITY:
- *
- *      Alpha SRM Console Firmware
- *
- *  MODULE DESCRIPTION:
- *
- *	SMC37c669 Super I/O controller configuration routines.
- *
- *  AUTHORS:
- *
- *	Eric Rasmussen
- *
- *  CREATION DATE:
- *  
- *	28-Jan-1997
- *
- *  MODIFICATION HISTORY:
- *	
- *	er	01-May-1997	Fixed pointer conversion errors in 
- *				SMC37c669_get_device_config().
- *      er	28-Jan-1997	Initial version.
- *
- *--
- */
-#if 0
-/* $INCLUDE_OPTIONS$ */
-#include    "cp$inc:platform_io.h"
-/* $INCLUDE_OPTIONS_END$ */
-#include    "cp$src:common.h"
-#include    "cp$inc:prototypes.h"
-#include    "cp$src:kernel_def.h"
-#include    "cp$src:msg_def.h"
-#include    "cp$src:smcc669_def.h"
-/* Platform-specific includes */
-#include    "cp$src:platform.h"
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define wb( _x_, _y_ )	outb( _y_, (unsigned int)((unsigned long)_x_) )
-#define rb( _x_ )	inb( (unsigned int)((unsigned long)_x_) )
-
-/*
-** Local storage for device configuration information.
-**
-** Since the SMC37c669 does not provide an explicit
-** mechanism for enabling/disabling individual device 
-** functions, other than unmapping the device, local 
-** storage for device configuration information is 
-** allocated here for use in implementing our own 
-** function enable/disable scheme.
-*/
-static struct DEVICE_CONFIG {
-    unsigned int port1;
-    unsigned int port2;
-    int irq;
-    int drq;
-} local_config [NUM_FUNCS];
-
-/*
-** List of all possible addresses for the Super I/O chip
-*/
-static unsigned long SMC37c669_Addresses[] __initdata =
-    {
-	0x3F0UL,	    /* Primary address	    */
-	0x370UL,	    /* Secondary address    */
-	0UL		    /* End of list	    */
-    };
-
-/*
-** Global Pointer to the Super I/O device
-*/
-static SMC37c669_CONFIG_REGS *SMC37c669 __initdata = NULL;
-
-/*
-** IRQ Translation Table
-**
-** The IRQ translation table is a list of SMC37c669 device 
-** and standard ISA IRQs.
-**
-*/
-static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_table __initdata; 
-
-/*
-** The following definition is for the default IRQ 
-** translation table.
-*/
-static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_default_irq_table[]
-__initdata = 
-    { 
-	{ SMC37c669_DEVICE_IRQ_A, -1 }, 
-	{ SMC37c669_DEVICE_IRQ_B, -1 }, 
-	{ SMC37c669_DEVICE_IRQ_C, 7 }, 
-	{ SMC37c669_DEVICE_IRQ_D, 6 }, 
-	{ SMC37c669_DEVICE_IRQ_E, 4 }, 
-	{ SMC37c669_DEVICE_IRQ_F, 3 }, 
-	{ SMC37c669_DEVICE_IRQ_H, -1 }, 
-	{ -1, -1 } /* End of table */
-    };
-
-/*
-** The following definition is for the MONET (XP1000) IRQ 
-** translation table.
-*/
-static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_monet_irq_table[]
-__initdata = 
-    { 
-	{ SMC37c669_DEVICE_IRQ_A, -1 }, 
-	{ SMC37c669_DEVICE_IRQ_B, -1 }, 
-	{ SMC37c669_DEVICE_IRQ_C, 6 }, 
-	{ SMC37c669_DEVICE_IRQ_D, 7 }, 
-	{ SMC37c669_DEVICE_IRQ_E, 4 }, 
-	{ SMC37c669_DEVICE_IRQ_F, 3 }, 
-	{ SMC37c669_DEVICE_IRQ_H, -1 }, 
-	{ -1, -1 } /* End of table */
-    };
-
-static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_tables[] __initdata =
-    {
-	SMC37c669_default_irq_table,
-	SMC37c669_monet_irq_table
-    }; 
-
-/*
-** DRQ Translation Table
-**
-** The DRQ translation table is a list of SMC37c669 device and
-** ISA DMA channels.
-**
-*/
-static SMC37c669_DRQ_TRANSLATION_ENTRY *SMC37c669_drq_table __initdata;
-
-/*
-** The following definition is the default DRQ
-** translation table.
-*/
-static SMC37c669_DRQ_TRANSLATION_ENTRY SMC37c669_default_drq_table[]
-__initdata = 
-    { 
-	{ SMC37c669_DEVICE_DRQ_A, 2 }, 
-	{ SMC37c669_DEVICE_DRQ_B, 3 }, 
-	{ SMC37c669_DEVICE_DRQ_C, -1 }, 
-	{ -1, -1 } /* End of table */
-    };
-
-/*
-** Local Function Prototype Declarations
-*/
-
-static unsigned int SMC37c669_is_device_enabled( 
-    unsigned int func 
-);
-
-#if 0
-static unsigned int SMC37c669_get_device_config( 
-    unsigned int func, 
-    int *port, 
-    int *irq, 
-    int *drq 
-);
-#endif
-
-static void SMC37c669_config_mode( 
-    unsigned int enable 
-);
-
-static unsigned char SMC37c669_read_config( 
-    unsigned char index 
-);
-
-static void SMC37c669_write_config( 
-    unsigned char index, 
-    unsigned char data 
-);
-
-static void SMC37c669_init_local_config( void );
-
-static struct DEVICE_CONFIG *SMC37c669_get_config(
-    unsigned int func
-);
-
-static int SMC37c669_xlate_irq(
-    int irq 
-);
-
-static int SMC37c669_xlate_drq(
-    int drq 
-);
-
-static  __cacheline_aligned DEFINE_SPINLOCK(smc_lock);
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function detects the presence of an SMC37c669 Super I/O
-**	controller.
-**
-**  FORMAL PARAMETERS:
-**
-**	None
-**
-**  RETURN VALUE:
-**
-**      Returns a pointer to the device if found, otherwise,
-**	the NULL pointer is returned.
-**
-**  SIDE EFFECTS:
-**
-**      None
-**
-**--
-*/
-SMC37c669_CONFIG_REGS * __init SMC37c669_detect( int index )
-{
-    int i;
-    SMC37c669_DEVICE_ID_REGISTER id;
-
-    for ( i = 0;  SMC37c669_Addresses[i] != 0;  i++ ) {
-/*
-** Initialize the device pointer even though we don't yet know if
-** the controller is at this address.  The support functions access
-** the controller through this device pointer so we need to set it
-** even when we are looking ...
-*/
-    	SMC37c669 = ( SMC37c669_CONFIG_REGS * )SMC37c669_Addresses[i];
-/*
-** Enter configuration mode
-*/
-	SMC37c669_config_mode( TRUE );
-/*
-** Read the device id
-*/
-	id.as_uchar = SMC37c669_read_config( SMC37c669_DEVICE_ID_INDEX );
-/*
-** Exit configuration mode
-*/
-	SMC37c669_config_mode( FALSE );
-/*
-** Does the device id match?  If so, assume we have found an
-** SMC37c669 controller at this address.
-*/
-	if ( id.by_field.device_id == SMC37c669_DEVICE_ID ) {
-/*
-** Initialize the IRQ and DRQ translation tables.
-*/
-    	    SMC37c669_irq_table = SMC37c669_irq_tables[ index ];
-	    SMC37c669_drq_table = SMC37c669_default_drq_table;
-/*
-** erfix
-**
-** If the platform can't use the IRQ and DRQ defaults set up in this 
-** file, it should call a platform-specific external routine at this 
-** point to reset the IRQ and DRQ translation table pointers to point 
-** at the appropriate tables for the platform.  If the defaults are 
-** acceptable, then the external routine should do nothing.
-*/
-
-/*
-** Put the chip back into configuration mode
-*/
-	    SMC37c669_config_mode( TRUE );
-/*
-** Initialize local storage for configuration information
-*/
-	    SMC37c669_init_local_config( );
-/*
-** Exit configuration mode
-*/
-	    SMC37c669_config_mode( FALSE );
-/*
-** SMC37c669 controller found, break out of search loop
-*/
-	    break;
-	}
-	else {
-/*
-** Otherwise, we did not find an SMC37c669 controller at this
-** address so set the device pointer to NULL.
-*/
-	    SMC37c669 = NULL;
-	}
-    }
-    return SMC37c669;
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function enables an SMC37c669 device function.
-**
-**  FORMAL PARAMETERS:
-**
-**      func:
-**          Which device function to enable
-**
-**  RETURN VALUE:
-**
-**      Returns TRUE is the device function was enabled, otherwise, FALSE
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**  DESIGN:
-**
-**      Enabling a device function in the SMC37c669 controller involves
-**	setting all of its mappings (port, irq, drq ...).  A local 
-**	"shadow" copy of the device configuration is kept so we can
-**	just set each mapping to what the local copy says.
-**
-**	This function ALWAYS updates the local shadow configuration of
-**	the device function being enabled, even if the device is always
-**	enabled.  To avoid replication of code, functions such as
-**	configure_device set up the local copy and then call this 
-**	function to the update the real device.
-**
-**--
-*/
-unsigned int __init SMC37c669_enable_device ( unsigned int func )
-{
-    unsigned int ret_val = FALSE;
-/*
-** Put the device into configuration mode
-*/
-    SMC37c669_config_mode( TRUE );
-    switch ( func ) {
-    	case SERIAL_0:
-	    {
-	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_SERIAL_IRQ_REGISTER irq;
-/*
-** Enable the serial 1 IRQ mapping
-*/
-	    	irq.as_uchar = 
-		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
-
-		irq.by_field.uart1_irq =
-		    SMC37c669_RAW_DEVICE_IRQ(
-			SMC37c669_xlate_irq( local_config[ func ].irq )
-		    );
-
-		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
-/*
-** Enable the serial 1 port base address mapping
-*/
-		base_addr.as_uchar = 0;
-		base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
-
-		SMC37c669_write_config( 
-		    SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case SERIAL_1:
-	    {
-	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_SERIAL_IRQ_REGISTER irq;
-/*
-** Enable the serial 2 IRQ mapping
-*/
-	    	irq.as_uchar = 
-		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
-
-		irq.by_field.uart2_irq =
-		    SMC37c669_RAW_DEVICE_IRQ(
-			SMC37c669_xlate_irq( local_config[ func ].irq )
-		    );
-
-		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
-/*
-** Enable the serial 2 port base address mapping
-*/
-		base_addr.as_uchar = 0;
-		base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
-
-		SMC37c669_write_config( 
-		    SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case PARALLEL_0:
-	    {
-	    	SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
-		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
-/*
-** Enable the parallel port DMA channel mapping
-*/
-	    	drq.as_uchar =
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
-
-		drq.by_field.ppt_drq = 
-		    SMC37c669_RAW_DEVICE_DRQ(
-			SMC37c669_xlate_drq( local_config[ func ].drq )
-		    );
-
-		SMC37c669_write_config(
-		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
-		    drq.as_uchar
-		);
-/*
-** Enable the parallel port IRQ mapping
-*/
-		irq.as_uchar = 
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
-
-		irq.by_field.ppt_irq =
-		    SMC37c669_RAW_DEVICE_IRQ(
-			SMC37c669_xlate_irq( local_config[ func ].irq )
-		    );
-
-		SMC37c669_write_config( 
-		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
-		    irq.as_uchar
-		);
-/*
-** Enable the parallel port base address mapping
-*/
-		base_addr.as_uchar = 0;
-		base_addr.by_field.addr9_2 = local_config[ func ].port1 >> 2;
-
-		SMC37c669_write_config(
-		    SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case FLOPPY_0:
-	    {
-	    	SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
-		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
-/*
-** Enable the floppy controller DMA channel mapping
-*/
-	    	drq.as_uchar =
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
-		 
-		drq.by_field.fdc_drq =
-		    SMC37c669_RAW_DEVICE_DRQ(
-			SMC37c669_xlate_drq( local_config[ func ].drq )
-		    );
-		 
-		SMC37c669_write_config( 
-		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
-		    drq.as_uchar
-		);
-/*
-** Enable the floppy controller IRQ mapping
-*/
-		irq.as_uchar =
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
-		 
-		irq.by_field.fdc_irq =
-		    SMC37c669_RAW_DEVICE_IRQ(
-			SMC37c669_xlate_irq( local_config[ func ].irq )
-		    );
-		 
-		SMC37c669_write_config(
-		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
-		    irq.as_uchar
-		);
-/*
-** Enable the floppy controller base address mapping
-*/
-		base_addr.as_uchar = 0;
-		base_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_FDC_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case IDE_0:
-	    {
-	    	SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
-/*
-** Enable the IDE alternate status base address mapping
-*/
-	    	ide_addr.as_uchar = 0;
-		ide_addr.by_field.addr9_4 = local_config[ func ].port2 >> 4;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
-		    ide_addr.as_uchar
-		);
-/*
-** Enable the IDE controller base address mapping
-*/
-		ide_addr.as_uchar = 0;
-		ide_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_IDE_BASE_ADDRESS_INDEX,
-		    ide_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-    }
-/*
-** Exit configuration mode and return
-*/
-    SMC37c669_config_mode( FALSE );
-
-    return ret_val;
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function disables a device function within the
-**	SMC37c669 Super I/O controller.
-**
-**  FORMAL PARAMETERS:
-**
-**      func:
-**          Which function to disable
-**
-**  RETURN VALUE:
-**
-**      Return TRUE if the device function was disabled, otherwise, FALSE
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**  DESIGN:
-**
-**      Disabling a function in the SMC37c669 device involves
-**	disabling all the function's mappings (port, irq, drq ...).
-**	A shadow copy of the device configuration is maintained
-**	in local storage so we won't worry aboving saving the
-**	current configuration information.
-**
-**--
-*/
-unsigned int __init SMC37c669_disable_device ( unsigned int func )
-{
-    unsigned int ret_val = FALSE;
-
-/*
-** Put the device into configuration mode
-*/
-    SMC37c669_config_mode( TRUE );
-    switch ( func ) {
-    	case SERIAL_0:
-	    {
-	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_SERIAL_IRQ_REGISTER irq;
-/*
-** Disable the serial 1 IRQ mapping
-*/
-	    	irq.as_uchar = 
-		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
-
-		irq.by_field.uart1_irq = 0;
-
-		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
-/*
-** Disable the serial 1 port base address mapping
-*/
-		base_addr.as_uchar = 0;
-		SMC37c669_write_config( 
-		    SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case SERIAL_1:
-	    {
-	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_SERIAL_IRQ_REGISTER irq;
-/*
-** Disable the serial 2 IRQ mapping
-*/
-	    	irq.as_uchar = 
-		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
-
-		irq.by_field.uart2_irq = 0;
-
-		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
-/*
-** Disable the serial 2 port base address mapping
-*/
-		base_addr.as_uchar = 0;
-
-		SMC37c669_write_config( 
-		    SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case PARALLEL_0:
-	    {
-	    	SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
-		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
-/*
-** Disable the parallel port DMA channel mapping
-*/
-	    	drq.as_uchar =
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
-
-		drq.by_field.ppt_drq = 0;
-
-		SMC37c669_write_config(
-		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
-		    drq.as_uchar
-		);
-/*
-** Disable the parallel port IRQ mapping
-*/
-		irq.as_uchar = 
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
-
-		irq.by_field.ppt_irq = 0;
-
-		SMC37c669_write_config( 
-		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
-		    irq.as_uchar
-		);
-/*
-** Disable the parallel port base address mapping
-*/
-		base_addr.as_uchar = 0;
-
-		SMC37c669_write_config(
-		    SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case FLOPPY_0:
-	    {
-	    	SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
-		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
-		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
-/*
-** Disable the floppy controller DMA channel mapping
-*/
-	    	drq.as_uchar =
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
-		 
-		drq.by_field.fdc_drq = 0;
-		 
-		SMC37c669_write_config( 
-		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
-		    drq.as_uchar
-		);
-/*
-** Disable the floppy controller IRQ mapping
-*/
-		irq.as_uchar =
-		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
-		 
-		irq.by_field.fdc_irq = 0;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
-		    irq.as_uchar
-		);
-/*
-** Disable the floppy controller base address mapping
-*/
-		base_addr.as_uchar = 0;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_FDC_BASE_ADDRESS_INDEX,
-		    base_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-	case IDE_0:
-	    {
-	    	SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
-/*
-** Disable the IDE alternate status base address mapping
-*/
-	    	ide_addr.as_uchar = 0;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
-		    ide_addr.as_uchar
-		);
-/*
-** Disable the IDE controller base address mapping
-*/
-		ide_addr.as_uchar = 0;
-		 
-		SMC37c669_write_config(
-		    SMC37c669_IDE_BASE_ADDRESS_INDEX,
-		    ide_addr.as_uchar
-		);
-		ret_val = TRUE;
-		break;
-	    }
-    }
-/*
-** Exit configuration mode and return
-*/
-    SMC37c669_config_mode( FALSE );
-
-    return ret_val;
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function configures a device function within the 
-**	SMC37c669 Super I/O controller.
-**
-**  FORMAL PARAMETERS:
-**
-**      func:
-**          Which device function
-**       
-**      port:
-**          I/O port for the function to use
-**	 
-**      irq:
-**          IRQ for the device function to use
-**	 
-**      drq:
-**          DMA channel for the device function to use
-**
-**  RETURN VALUE:
-**
-**      Returns TRUE if the device function was configured, 
-**	otherwise, FALSE.
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**  DESIGN:
-**
-**	If this function returns TRUE, the local shadow copy of
-**	the configuration is also updated.  If the device function
-**	is currently disabled, only the local shadow copy is 
-**	updated and the actual device function will be updated
-**	if/when it is enabled.
-**
-**--
-*/
-unsigned int __init SMC37c669_configure_device (
-    unsigned int func,
-    int port,
-    int irq,
-    int drq )
-{
-    struct DEVICE_CONFIG *cp;
-
-/*
-** Check for a valid configuration
-*/
-    if ( ( cp = SMC37c669_get_config ( func ) ) != NULL ) {
-/*
-** Configuration is valid, update the local shadow copy
-*/
-    	if ( ( drq & ~0xFF ) == 0 ) {
-	    cp->drq = drq;
-	}
-	if ( ( irq & ~0xFF ) == 0 ) {
-	    cp->irq = irq;
-	}
-	if ( ( port & ~0xFFFF ) == 0 ) {
-	    cp->port1 = port;
-	}
-/*
-** If the device function is enabled, update the actual
-** device configuration.
-*/
-	if ( SMC37c669_is_device_enabled( func ) ) {
-	    SMC37c669_enable_device( func );
-	}
-	return TRUE;
-    }
-    return FALSE;
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function determines whether a device function
-**	within the SMC37c669 controller is enabled.
-**
-**  FORMAL PARAMETERS:
-**
-**      func:
-**          Which device function
-**
-**  RETURN VALUE:
-**
-**      Returns TRUE if the device function is enabled, otherwise, FALSE
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**  DESIGN:
-**
-**      To check whether a device is enabled we will only look at 
-**	the port base address mapping.  According to the SMC37c669
-**	specification, all of the port base address mappings are
-**	disabled if the addr<9:8> (bits <7:6> of the register) are
-**	zero.
-**
-**--
-*/
-static unsigned int __init SMC37c669_is_device_enabled ( unsigned int func )
-{
-    unsigned char base_addr = 0;
-    unsigned int dev_ok = FALSE;
-    unsigned int ret_val = FALSE;
-/*
-** Enter configuration mode
-*/
-    SMC37c669_config_mode( TRUE );
-     
-    switch ( func ) {
-    	case SERIAL_0:
-	    base_addr =
-		SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
-	    dev_ok = TRUE;
-	    break;
-	case SERIAL_1:
-	    base_addr =
-		SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
-	    dev_ok = TRUE;
-	    break;
-	case PARALLEL_0:
-	    base_addr =
-		SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
-	    dev_ok = TRUE;
-	    break;
-	case FLOPPY_0:
-	    base_addr =
-		SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
-	    dev_ok = TRUE;
-	    break;
-	case IDE_0:
-	    base_addr =
-		SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
-	    dev_ok = TRUE;
-	    break;
-    }
-/*
-** If we have a valid device, check base_addr<7:6> to see if the
-** device is enabled (mapped).
-*/
-    if ( ( dev_ok ) && ( ( base_addr & 0xC0 ) != 0 ) ) {
-/*
-** The mapping is not disabled, so assume that the function is 
-** enabled.
-*/
-    	ret_val = TRUE;
-    }
-/*
-** Exit configuration mode 
-*/
-    SMC37c669_config_mode( FALSE );
-
-    return ret_val;
-}
-
-
-#if 0
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function retrieves the configuration information of a 
-**	device function within the SMC37c699 Super I/O controller.
-**
-**  FORMAL PARAMETERS:
-**
-**      func:
-**          Which device function
-**       
-**      port:
-**          I/O port returned
-**	 
-**      irq:
-**          IRQ returned
-**	 
-**      drq:
-**          DMA channel returned
-**
-**  RETURN VALUE:
-**
-**      Returns TRUE if the device configuration was successfully
-**	retrieved, otherwise, FALSE.
-**
-**  SIDE EFFECTS:
-**
-**      The data pointed to by the port, irq, and drq parameters
-**	my be modified even if the configuration is not successfully
-**	retrieved.
-**
-**  DESIGN:
-**
-**      The device configuration is fetched from the local shadow
-**	copy.  Any unused parameters will be set to -1.  Any
-**	parameter which is not desired can specify the NULL
-**	pointer.
-**
-**--
-*/
-static unsigned int __init SMC37c669_get_device_config (
-    unsigned int func,
-    int *port,
-    int *irq,
-    int *drq )
-{
-    struct DEVICE_CONFIG *cp;
-    unsigned int ret_val = FALSE;
-/*
-** Check for a valid device configuration
-*/
-    if ( ( cp = SMC37c669_get_config( func ) ) != NULL ) {
-    	if ( drq != NULL ) {
-	    *drq = cp->drq;
-	    ret_val = TRUE;
-	}
-	if ( irq != NULL ) {
-	    *irq = cp->irq;
-	    ret_val = TRUE;
-	}
-	if ( port != NULL ) {
-	    *port = cp->port1;
-	    ret_val = TRUE;
-	}
-    }
-    return ret_val;
-}
-#endif
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function displays the current state of the SMC37c699
-**	Super I/O controller's device functions.
-**
-**  FORMAL PARAMETERS:
-**
-**      None
-**
-**  RETURN VALUE:
-**
-**      None
-**
-**  SIDE EFFECTS:
-**
-**      None
-**
-**--
-*/
-void __init SMC37c669_display_device_info ( void )
-{
-    if ( SMC37c669_is_device_enabled( SERIAL_0 ) ) {
-    	printk( "  Serial 0:    Enabled [ Port 0x%x, IRQ %d ]\n",
-		 local_config[ SERIAL_0 ].port1,
-		 local_config[ SERIAL_0 ].irq
-	);
-    }
-    else {
-    	printk( "  Serial 0:    Disabled\n" );
-    }
-
-    if ( SMC37c669_is_device_enabled( SERIAL_1 ) ) {
-    	printk( "  Serial 1:    Enabled [ Port 0x%x, IRQ %d ]\n",
-		 local_config[ SERIAL_1 ].port1,
-		 local_config[ SERIAL_1 ].irq
-	);
-    }
-    else {
-    	printk( "  Serial 1:    Disabled\n" );
-    }
-
-    if ( SMC37c669_is_device_enabled( PARALLEL_0 ) ) {
-    	printk( "  Parallel:    Enabled [ Port 0x%x, IRQ %d/%d ]\n",
-		 local_config[ PARALLEL_0 ].port1,
-		 local_config[ PARALLEL_0 ].irq,
-		 local_config[ PARALLEL_0 ].drq
-	);
-    }
-    else {
-    	printk( "  Parallel:    Disabled\n" );
-    }
-
-    if ( SMC37c669_is_device_enabled( FLOPPY_0 ) ) {
-    	printk( "  Floppy Ctrl: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
-		 local_config[ FLOPPY_0 ].port1,
-		 local_config[ FLOPPY_0 ].irq,
-		 local_config[ FLOPPY_0 ].drq
-	);
-    }
-    else {
-    	printk( "  Floppy Ctrl: Disabled\n" );
-    }
-
-    if ( SMC37c669_is_device_enabled( IDE_0 ) ) {
-    	printk( "  IDE 0:       Enabled [ Port 0x%x, IRQ %d ]\n",
-		 local_config[ IDE_0 ].port1,
-		 local_config[ IDE_0 ].irq
-	);
-    }
-    else {
-    	printk( "  IDE 0:       Disabled\n" );
-    }
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function puts the SMC37c669 Super I/O controller into,
-**	and takes it out of, configuration mode.
-**
-**  FORMAL PARAMETERS:
-**
-**      enable:
-**          TRUE to enter configuration mode, FALSE to exit.
-**
-**  RETURN VALUE:
-**
-**      None
-**
-**  SIDE EFFECTS:
-**
-**      The SMC37c669 controller may be left in configuration mode.
-**
-**--
-*/
-static void __init SMC37c669_config_mode( 
-    unsigned int enable )
-{
-    if ( enable ) {
-/*
-** To enter configuration mode, two writes in succession to the index
-** port are required.  If a write to another address or port occurs
-** between these two writes, the chip does not enter configuration
-** mode.  Therefore, a spinlock is placed around the two writes to 
-** guarantee that they complete uninterrupted.
-*/
-	spin_lock(&smc_lock);
-    	wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
-    	wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
-	spin_unlock(&smc_lock);
-    }
-    else {
-    	wb( &SMC37c669->index_port, SMC37c669_CONFIG_OFF_KEY );
-    }
-}
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function reads an SMC37c669 Super I/O controller
-**	configuration register.  This function assumes that the
-**	device is already in configuration mode.
-**
-**  FORMAL PARAMETERS:
-**
-**      index:
-**          Index value of configuration register to read
-**
-**  RETURN VALUE:
-**
-**      Data read from configuration register
-**
-**  SIDE EFFECTS:
-**
-**      None
-**
-**--
-*/
-static unsigned char __init SMC37c669_read_config( 
-    unsigned char index )
-{
-    unsigned char data;
-
-    wb( &SMC37c669->index_port, index );
-    data = rb( &SMC37c669->data_port );
-    return data;
-}
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function writes an SMC37c669 Super I/O controller
-**	configuration register.  This function assumes that the
-**	device is already in configuration mode.
-**
-**  FORMAL PARAMETERS:
-**
-**      index:
-**          Index of configuration register to write
-**       
-**      data:
-**          Data to be written
-**
-**  RETURN VALUE:
-**
-**      None
-**
-**  SIDE EFFECTS:
-**
-**      None
-**
-**--
-*/
-static void __init SMC37c669_write_config( 
-    unsigned char index, 
-    unsigned char data )
-{
-    wb( &SMC37c669->index_port, index );
-    wb( &SMC37c669->data_port, data );
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function initializes the local device
-**	configuration storage.  This function assumes
-**	that the device is already in configuration
-**	mode.
-**
-**  FORMAL PARAMETERS:
-**
-**      None
-**
-**  RETURN VALUE:
-**
-**      None
-**
-**  SIDE EFFECTS:
-**
-**      Local storage for device configuration information
-**	is initialized.
-**
-**--
-*/
-static void __init SMC37c669_init_local_config ( void )
-{
-    SMC37c669_SERIAL_BASE_ADDRESS_REGISTER uart_base;
-    SMC37c669_SERIAL_IRQ_REGISTER uart_irqs;
-    SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER ppt_base;
-    SMC37c669_PARALLEL_FDC_IRQ_REGISTER ppt_fdc_irqs;
-    SMC37c669_PARALLEL_FDC_DRQ_REGISTER ppt_fdc_drqs;
-    SMC37c669_FDC_BASE_ADDRESS_REGISTER fdc_base;
-    SMC37c669_IDE_ADDRESS_REGISTER ide_base;
-    SMC37c669_IDE_ADDRESS_REGISTER ide_alt;
-
-/*
-** Get serial port 1 base address 
-*/
-    uart_base.as_uchar = 
-	SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
-/*
-** Get IRQs for serial ports 1 & 2
-*/
-    uart_irqs.as_uchar = 
-	SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
-/*
-** Store local configuration information for serial port 1
-*/
-    local_config[SERIAL_0].port1 = uart_base.by_field.addr9_3 << 3;
-    local_config[SERIAL_0].irq = 
-	SMC37c669_xlate_irq( 
-	    SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart1_irq ) 
-	);
-/*
-** Get serial port 2 base address
-*/
-    uart_base.as_uchar = 
-	SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
-/*
-** Store local configuration information for serial port 2
-*/
-    local_config[SERIAL_1].port1 = uart_base.by_field.addr9_3 << 3;
-    local_config[SERIAL_1].irq = 
-	SMC37c669_xlate_irq( 
-	    SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart2_irq ) 
-	);
-/*
-** Get parallel port base address
-*/
-    ppt_base.as_uchar =
-	SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
-/*
-** Get IRQs for parallel port and floppy controller
-*/
-    ppt_fdc_irqs.as_uchar =
-	SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
-/*
-** Get DRQs for parallel port and floppy controller
-*/
-    ppt_fdc_drqs.as_uchar =
-	SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
-/*
-** Store local configuration information for parallel port
-*/
-    local_config[PARALLEL_0].port1 = ppt_base.by_field.addr9_2 << 2;
-    local_config[PARALLEL_0].irq =
-	SMC37c669_xlate_irq(
-	    SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.ppt_irq )
-	);
-    local_config[PARALLEL_0].drq =
-	SMC37c669_xlate_drq(
-	    SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.ppt_drq )
-	);
-/*
-** Get floppy controller base address
-*/
-    fdc_base.as_uchar = 
-	SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
-/*
-** Store local configuration information for floppy controller
-*/
-    local_config[FLOPPY_0].port1 = fdc_base.by_field.addr9_4 << 4;
-    local_config[FLOPPY_0].irq =
-	SMC37c669_xlate_irq(
-	    SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.fdc_irq )
-	);
-    local_config[FLOPPY_0].drq =
-	SMC37c669_xlate_drq(
-	    SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.fdc_drq )
-	);
-/*
-** Get IDE controller base address
-*/
-    ide_base.as_uchar =
-	SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
-/*
-** Get IDE alternate status base address
-*/
-    ide_alt.as_uchar =
-	SMC37c669_read_config( SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX );
-/*
-** Store local configuration information for IDE controller
-*/
-    local_config[IDE_0].port1 = ide_base.by_field.addr9_4 << 4;
-    local_config[IDE_0].port2 = ide_alt.by_field.addr9_4 << 4;
-    local_config[IDE_0].irq = 14;
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function returns a pointer to the local shadow
-**	configuration of the requested device function.
-**
-**  FORMAL PARAMETERS:
-**
-**      func:
-**          Which device function
-**
-**  RETURN VALUE:
-**
-**      Returns a pointer to the DEVICE_CONFIG structure for the
-**	requested function, otherwise, NULL.
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**--
-*/
-static struct DEVICE_CONFIG * __init SMC37c669_get_config( unsigned int func )
-{
-    struct DEVICE_CONFIG *cp = NULL;
-
-    switch ( func ) {
-    	case SERIAL_0:
-	    cp = &local_config[ SERIAL_0 ];
-	    break;
-	case SERIAL_1:
-	    cp = &local_config[ SERIAL_1 ];
-	    break;
-	case PARALLEL_0:
-	    cp = &local_config[ PARALLEL_0 ];
-	    break;
-	case FLOPPY_0:
-	    cp = &local_config[ FLOPPY_0 ];
-	    break;
-	case IDE_0:
-	    cp = &local_config[ IDE_0 ];
-	    break;
-    }
-    return cp;
-}
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function translates IRQs back and forth between ISA
-**	IRQs and SMC37c669 device IRQs.
-**
-**  FORMAL PARAMETERS:
-**
-**      irq:
-**          The IRQ to translate
-**
-**  RETURN VALUE:
-**
-**      Returns the translated IRQ, otherwise, returns -1.
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**--
-*/
-static int __init SMC37c669_xlate_irq ( int irq )
-{
-    int i, translated_irq = -1;
-
-    if ( SMC37c669_IS_DEVICE_IRQ( irq ) ) {
-/*
-** We are translating a device IRQ to an ISA IRQ
-*/
-    	for ( i = 0; ( SMC37c669_irq_table[i].device_irq != -1 ) || ( SMC37c669_irq_table[i].isa_irq != -1 ); i++ ) {
-	    if ( irq == SMC37c669_irq_table[i].device_irq ) {
-	    	translated_irq = SMC37c669_irq_table[i].isa_irq;
-		break;
-	    }
-	}
-    }
-    else {
-/*
-** We are translating an ISA IRQ to a device IRQ
-*/
-    	for ( i = 0; ( SMC37c669_irq_table[i].isa_irq != -1 ) || ( SMC37c669_irq_table[i].device_irq != -1 ); i++ ) {
-	    if ( irq == SMC37c669_irq_table[i].isa_irq ) {
-	    	translated_irq = SMC37c669_irq_table[i].device_irq;
-		break;
-	    }
-	}
-    }
-    return translated_irq;
-}
-
-
-/*
-**++
-**  FUNCTIONAL DESCRIPTION:
-**
-**      This function translates DMA channels back and forth between
-**	ISA DMA channels and SMC37c669 device DMA channels.
-**
-**  FORMAL PARAMETERS:
-**
-**      drq:
-**          The DMA channel to translate
-**
-**  RETURN VALUE:
-**
-**      Returns the translated DMA channel, otherwise, returns -1
-**
-**  SIDE EFFECTS:
-**
-**      {@description or none@}
-**
-**--
-*/
-static int __init SMC37c669_xlate_drq ( int drq )
-{
-    int i, translated_drq = -1;
-
-    if ( SMC37c669_IS_DEVICE_DRQ( drq ) ) {
-/*
-** We are translating a device DMA channel to an ISA DMA channel
-*/
-    	for ( i = 0; ( SMC37c669_drq_table[i].device_drq != -1 ) || ( SMC37c669_drq_table[i].isa_drq != -1 ); i++ ) {
-	    if ( drq == SMC37c669_drq_table[i].device_drq ) {
-	    	translated_drq = SMC37c669_drq_table[i].isa_drq;
-		break;
-	    }
-	}
-    }
-    else {
-/*
-** We are translating an ISA DMA channel to a device DMA channel
-*/
-    	for ( i = 0; ( SMC37c669_drq_table[i].isa_drq != -1 ) || ( SMC37c669_drq_table[i].device_drq != -1 ); i++ ) {
-	    if ( drq == SMC37c669_drq_table[i].isa_drq ) {
-	    	translated_drq = SMC37c669_drq_table[i].device_drq;
-		break;
-	    }
-	}
-    }
-    return translated_drq;
-}
-
-#if 0
-int __init smcc669_init ( void )
-{
-    struct INODE *ip;
-
-    allocinode( smc_ddb.name, 1, &ip );
-    ip->dva = &smc_ddb;
-    ip->attr = ATTR$M_WRITE | ATTR$M_READ;
-    ip->len[0] = 0x30;
-    ip->misc = 0;
-    INODE_UNLOCK( ip );
-
-    return msg_success;
-}
-
-int __init smcc669_open( struct FILE *fp, char *info, char *next, char *mode )
-{
-    struct INODE *ip;
-/*
-** Allow multiple readers but only one writer.  ip->misc keeps track
-** of the number of writers
-*/
-    ip = fp->ip;
-    INODE_LOCK( ip );
-    if ( fp->mode & ATTR$M_WRITE ) {
-	if ( ip->misc ) {
-	    INODE_UNLOCK( ip );
-	    return msg_failure;	    /* too many writers */
-	}
-	ip->misc++;
-    }
-/*
-** Treat the information field as a byte offset
-*/
-    *fp->offset = xtoi( info );
-    INODE_UNLOCK( ip );
-
-    return msg_success;
-}
-
-int __init smcc669_close( struct FILE *fp )
-{
-    struct INODE *ip;
-
-    ip = fp->ip;
-    if ( fp->mode & ATTR$M_WRITE ) {
-	INODE_LOCK( ip );
-	ip->misc--;
-	INODE_UNLOCK( ip );
-    }
-    return msg_success;
-}
-
-int __init smcc669_read( struct FILE *fp, int size, int number, unsigned char *buf )
-{
-    int i;
-    int length;
-    int nbytes;
-    struct INODE *ip;
-
-/*
-** Always access a byte at a time
-*/
-    ip = fp->ip;
-    length = size * number;
-    nbytes = 0;
-
-    SMC37c669_config_mode( TRUE );
-    for ( i = 0; i < length; i++ ) {
-	if ( !inrange( *fp->offset, 0, ip->len[0] ) ) 
-	    break;
-	*buf++ = SMC37c669_read_config( *fp->offset );
-	*fp->offset += 1;
-	nbytes++;
-    }
-    SMC37c669_config_mode( FALSE );
-    return nbytes;
-}
-
-int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *buf )
-{
-    int i;
-    int length;
-    int nbytes;
-    struct INODE *ip;
-/*
-** Always access a byte at a time
-*/
-    ip = fp->ip;
-    length = size * number;
-    nbytes = 0;
-
-    SMC37c669_config_mode( TRUE );
-    for ( i = 0; i < length; i++ ) {
-	if ( !inrange( *fp->offset, 0, ip->len[0] ) ) 
-	    break;
-	SMC37c669_write_config( *fp->offset, *buf );
-	*fp->offset += 1;
-	buf++;
-	nbytes++;
-    }
-    SMC37c669_config_mode( FALSE );
-    return nbytes;
-}
-#endif
-
-void __init
-SMC37c669_dump_registers(void)
-{
-  int i;
-  for (i = 0; i <= 0x29; i++)
-    printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
-}
-/*+
- * ============================================================================
- * = SMC_init - SMC37c669 Super I/O controller initialization                 =
- * ============================================================================
- *
- * OVERVIEW:
- *
- *      This routine configures and enables device functions on the
- *      SMC37c669 Super I/O controller.
- *
- * FORM OF CALL:
- *
- *      SMC_init( );
- *
- * RETURNS:
- *
- *      Nothing
- *
- * ARGUMENTS:
- *
- *      None
- *
- * SIDE EFFECTS:
- *
- *      None
- *
- */
-void __init SMC669_Init ( int index )
-{
-    SMC37c669_CONFIG_REGS *SMC_base;
-    unsigned long flags;
-
-    local_irq_save(flags);
-    if ( ( SMC_base = SMC37c669_detect( index ) ) != NULL ) {
-#if SMC_DEBUG
-	SMC37c669_config_mode( TRUE );
-	SMC37c669_dump_registers( );
-	SMC37c669_config_mode( FALSE );
-        SMC37c669_display_device_info( );
-#endif
-        SMC37c669_disable_device( SERIAL_0 );
-        SMC37c669_configure_device(
-            SERIAL_0,
-            COM1_BASE,
-            COM1_IRQ,
-            -1
-        );
-        SMC37c669_enable_device( SERIAL_0 );
-
-        SMC37c669_disable_device( SERIAL_1 );
-        SMC37c669_configure_device(
-            SERIAL_1,
-            COM2_BASE,
-            COM2_IRQ,
-            -1
-        );
-        SMC37c669_enable_device( SERIAL_1 );
-
-        SMC37c669_disable_device( PARALLEL_0 );
-        SMC37c669_configure_device(
-            PARALLEL_0,
-            PARP_BASE,
-            PARP_IRQ,
-            PARP_DRQ
-        );
-        SMC37c669_enable_device( PARALLEL_0 );
-
-        SMC37c669_disable_device( FLOPPY_0 );
-        SMC37c669_configure_device(
-            FLOPPY_0,
-            FDC_BASE,
-            FDC_IRQ,
-            FDC_DRQ
-        );
-        SMC37c669_enable_device( FLOPPY_0 );
-          
-	/* Wake up sometimes forgotten floppy, especially on DP264. */
-	outb(0xc, 0x3f2);
-
-        SMC37c669_disable_device( IDE_0 );
-
-#if SMC_DEBUG
-	SMC37c669_config_mode( TRUE );
-	SMC37c669_dump_registers( );
-	SMC37c669_config_mode( FALSE );
-        SMC37c669_display_device_info( );
-#endif
-	local_irq_restore(flags);
-        printk( "SMC37c669 Super I/O Controller found @ 0x%p\n",
-		SMC_base );
-    }
-    else {
-	local_irq_restore(flags);
-#if SMC_DEBUG
-        printk( "No SMC37c669 Super I/O Controller found\n" );
-#endif
-    }
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/smc37c93x.c b/ANDROID_3.4.5/arch/alpha/kernel/smc37c93x.c
deleted file mode 100644
index 6886b834..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/smc37c93x.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * SMC 37C93X initialization code
- */
-
-#include <linux/kernel.h>
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/hwrpb.h>
-#include <asm/io.h>
-#include <asm/segment.h>
-
-#define SMC_DEBUG 0
-
-#if SMC_DEBUG
-# define DBG_DEVS(args)         printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#define KB              1024
-#define MB              (1024*KB)
-#define GB              (1024*MB)
-
-/* device "activate" register contents */
-#define DEVICE_ON		1
-#define DEVICE_OFF		0
-
-/* configuration on/off keys */
-#define CONFIG_ON_KEY		0x55
-#define CONFIG_OFF_KEY		0xaa
-
-/* configuration space device definitions */
-#define FDC			0
-#define IDE1			1
-#define IDE2			2
-#define PARP			3
-#define SER1			4
-#define SER2			5
-#define RTCL			6
-#define KYBD			7
-#define AUXIO			8
-
-/* Chip register offsets from base */
-#define CONFIG_CONTROL		0x02
-#define INDEX_ADDRESS		0x03
-#define LOGICAL_DEVICE_NUMBER	0x07
-#define DEVICE_ID		0x20
-#define DEVICE_REV		0x21
-#define POWER_CONTROL		0x22
-#define POWER_MGMT		0x23
-#define OSC			0x24
-
-#define ACTIVATE		0x30
-#define ADDR_HI			0x60
-#define ADDR_LO			0x61
-#define INTERRUPT_SEL		0x70
-#define INTERRUPT_SEL_2		0x72 /* KYBD/MOUS only */
-#define DMA_CHANNEL_SEL		0x74 /* FDC/PARP only */
-
-#define FDD_MODE_REGISTER	0x90
-#define FDD_OPTION_REGISTER	0x91
-
-/* values that we read back that are expected ... */
-#define VALID_DEVICE_ID		2
-
-/* default device addresses */
-#define KYBD_INTERRUPT		1
-#define MOUS_INTERRUPT		12
-#define COM2_BASE		0x2f8
-#define COM2_INTERRUPT		3
-#define COM1_BASE		0x3f8
-#define COM1_INTERRUPT		4
-#define PARP_BASE		0x3bc
-#define PARP_INTERRUPT		7
-
-static unsigned long __init SMCConfigState(unsigned long baseAddr)
-{
-	unsigned char devId;
-
-	unsigned long configPort;
-	unsigned long indexPort;
-	unsigned long dataPort;
-
-	int i;
-
-	configPort = indexPort = baseAddr;
-	dataPort = configPort + 1;
-
-#define NUM_RETRIES 5
-
-	for (i = 0; i < NUM_RETRIES; i++)
-	{
-		outb(CONFIG_ON_KEY, configPort);
-		outb(CONFIG_ON_KEY, configPort);
-		outb(DEVICE_ID, indexPort);
-		devId = inb(dataPort);
-		if (devId == VALID_DEVICE_ID) {
-			outb(DEVICE_REV, indexPort);
-			/* unsigned char devRev = */ inb(dataPort);
-			break;
-		}
-		else
-			udelay(100);
-	}
-	return (i != NUM_RETRIES) ? baseAddr : 0L;
-}
-
-static void __init SMCRunState(unsigned long baseAddr)
-{
-	outb(CONFIG_OFF_KEY, baseAddr);
-}
-
-static unsigned long __init SMCDetectUltraIO(void)
-{
-	unsigned long baseAddr;
-
-	baseAddr = 0x3F0;
-	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
-		return( baseAddr );
-	}
-	baseAddr = 0x370;
-	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
-		return( baseAddr );
-	}
-	return( ( unsigned long )0 );
-}
-
-static void __init SMCEnableDevice(unsigned long baseAddr,
-			    unsigned long device,
-			    unsigned long portaddr,
-			    unsigned long interrupt)
-{
-	unsigned long indexPort;
-	unsigned long dataPort;
-
-	indexPort = baseAddr;
-	dataPort = baseAddr + 1;
-
-	outb(LOGICAL_DEVICE_NUMBER, indexPort);
-	outb(device, dataPort);
-
-	outb(ADDR_LO, indexPort);
-	outb(( portaddr & 0xFF ), dataPort);
-
-	outb(ADDR_HI, indexPort);
-	outb((portaddr >> 8) & 0xFF, dataPort);
-
-	outb(INTERRUPT_SEL, indexPort);
-	outb(interrupt, dataPort);
-
-	outb(ACTIVATE, indexPort);
-	outb(DEVICE_ON, dataPort);
-}
-
-static void __init SMCEnableKYBD(unsigned long baseAddr)
-{
-	unsigned long indexPort;
-	unsigned long dataPort;
-
-	indexPort = baseAddr;
-	dataPort = baseAddr + 1;
-
-	outb(LOGICAL_DEVICE_NUMBER, indexPort);
-	outb(KYBD, dataPort);
-
-	outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
-	outb(KYBD_INTERRUPT, dataPort);
-
-	outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
-	outb(MOUS_INTERRUPT, dataPort);
-
-	outb(ACTIVATE, indexPort);
-	outb(DEVICE_ON, dataPort);
-}
-
-static void __init SMCEnableFDC(unsigned long baseAddr)
-{
-	unsigned long indexPort;
-	unsigned long dataPort;
-
-	unsigned char oldValue;
-
-	indexPort = baseAddr;
-	dataPort = baseAddr + 1;
-
-	outb(LOGICAL_DEVICE_NUMBER, indexPort);
-	outb(FDC, dataPort);
-
-	outb(FDD_MODE_REGISTER, indexPort);
-	oldValue = inb(dataPort);
-
-	oldValue |= 0x0E;                   /* Enable burst mode */
-	outb(oldValue, dataPort);
-
-	outb(INTERRUPT_SEL, indexPort);	    /* Primary interrupt select */
-	outb(0x06, dataPort );
-
-	outb(DMA_CHANNEL_SEL, indexPort);   /* DMA channel select */
-	outb(0x02, dataPort);
-
-	outb(ACTIVATE, indexPort);
-	outb(DEVICE_ON, dataPort);
-}
-
-#if SMC_DEBUG
-static void __init SMCReportDeviceStatus(unsigned long baseAddr)
-{
-	unsigned long indexPort;
-	unsigned long dataPort;
-	unsigned char currentControl;
-
-	indexPort = baseAddr;
-	dataPort = baseAddr + 1;
-
-	outb(POWER_CONTROL, indexPort);
-	currentControl = inb(dataPort);
-
-	printk(currentControl & (1 << FDC)
-	       ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
-	printk(currentControl & (1 << IDE1)
-	       ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
-	printk(currentControl & (1 << IDE2)
-	       ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
-	printk(currentControl & (1 << PARP)
-	       ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
-	printk(currentControl & (1 << SER1)
-	       ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
-	printk(currentControl & (1 << SER2)
-	       ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
-
-	printk( "\n" );
-}
-#endif
-
-int __init SMC93x_Init(void)
-{
-	unsigned long SMCUltraBase;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
-#if SMC_DEBUG
-		SMCReportDeviceStatus(SMCUltraBase);
-#endif
-		SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
-		DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
-		SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
-		DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
-		SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
-		DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
-		/* On PC164, IDE on the SMC is not enabled;
-		   CMD646 (PCI) on MB */
-		SMCEnableKYBD(SMCUltraBase);
-		DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
-		SMCEnableFDC(SMCUltraBase);
-		DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
-#if SMC_DEBUG
-		SMCReportDeviceStatus(SMCUltraBase);
-#endif
-		SMCRunState(SMCUltraBase);
-		local_irq_restore(flags);
-		printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
-		       SMCUltraBase);
-		return 1;
-	}
-	else {
-		local_irq_restore(flags);
-		DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
-		return 0;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/smp.c b/ANDROID_3.4.5/arch/alpha/kernel/smp.c
deleted file mode 100644
index 50d438db..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/smp.c
+++ /dev/null
@@ -1,825 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/smp.c
- *
- *      2001-07-09 Phil Ezolt (Phillip.Ezolt@compaq.com)
- *            Renamed modified smp_call_function to smp_call_function_on_cpu()
- *            Created an function that conforms to the old calling convention
- *            of smp_call_function().
- *
- *            This is helpful for DCPI.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/err.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/irq.h>
-#include <linux/cache.h>
-#include <linux/profile.h>
-#include <linux/bitops.h>
-#include <linux/cpu.h>
-
-#include <asm/hwrpb.h>
-#include <asm/ptrace.h>
-#include <linux/atomic.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-
-
-#define DEBUG_SMP 0
-#if DEBUG_SMP
-#define DBGS(args)	printk args
-#else
-#define DBGS(args)
-#endif
-
-/* A collection of per-processor data.  */
-struct cpuinfo_alpha cpu_data[NR_CPUS];
-EXPORT_SYMBOL(cpu_data);
-
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
-
-enum ipi_message_type {
-	IPI_RESCHEDULE,
-	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
-	IPI_CPU_STOP,
-};
-
-/* Set to a secondary's cpuid when it comes online.  */
-static int smp_secondary_alive __devinitdata = 0;
-
-int smp_num_probed;		/* Internal processor count */
-int smp_num_cpus = 1;		/* Number that came online.  */
-EXPORT_SYMBOL(smp_num_cpus);
-
-/*
- * Called by both boot and secondaries to move global data into
- *  per-processor storage.
- */
-static inline void __init
-smp_store_cpu_info(int cpuid)
-{
-	cpu_data[cpuid].loops_per_jiffy = loops_per_jiffy;
-	cpu_data[cpuid].last_asn = ASN_FIRST_VERSION;
-	cpu_data[cpuid].need_new_asn = 0;
-	cpu_data[cpuid].asn_lock = 0;
-}
-
-/*
- * Ideally sets up per-cpu profiling hooks.  Doesn't do much now...
- */
-static inline void __init
-smp_setup_percpu_timer(int cpuid)
-{
-	cpu_data[cpuid].prof_counter = 1;
-	cpu_data[cpuid].prof_multiplier = 1;
-}
-
-static void __init
-wait_boot_cpu_to_stop(int cpuid)
-{
-	unsigned long stop = jiffies + 10*HZ;
-
-	while (time_before(jiffies, stop)) {
-	        if (!smp_secondary_alive)
-			return;
-		barrier();
-	}
-
-	printk("wait_boot_cpu_to_stop: FAILED on CPU %d, hanging now\n", cpuid);
-	for (;;)
-		barrier();
-}
-
-/*
- * Where secondaries begin a life of C.
- */
-void __cpuinit
-smp_callin(void)
-{
-	int cpuid = hard_smp_processor_id();
-
-	if (cpu_online(cpuid)) {
-		printk("??, cpu 0x%x already present??\n", cpuid);
-		BUG();
-	}
-	set_cpu_online(cpuid, true);
-
-	/* Turn on machine checks.  */
-	wrmces(7);
-
-	/* Set trap vectors.  */
-	trap_init();
-
-	/* Set interrupt vector.  */
-	wrent(entInt, 0);
-
-	/* Get our local ticker going. */
-	smp_setup_percpu_timer(cpuid);
-
-	/* Call platform-specific callin, if specified */
-	if (alpha_mv.smp_callin) alpha_mv.smp_callin();
-
-	/* All kernel threads share the same mm context.  */
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-
-	/* inform the notifiers about the new cpu */
-	notify_cpu_starting(cpuid);
-
-	/* Must have completely accurate bogos.  */
-	local_irq_enable();
-
-	/* Wait boot CPU to stop with irq enabled before running
-	   calibrate_delay. */
-	wait_boot_cpu_to_stop(cpuid);
-	mb();
-	calibrate_delay();
-
-	smp_store_cpu_info(cpuid);
-	/* Allow master to continue only after we written loops_per_jiffy.  */
-	wmb();
-	smp_secondary_alive = 1;
-
-	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
-	      cpuid, current, current->active_mm));
-
-	/* Do nothing.  */
-	cpu_idle();
-}
-
-/* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
-static int __devinit
-wait_for_txrdy (unsigned long cpumask)
-{
-	unsigned long timeout;
-
-	if (!(hwrpb->txrdy & cpumask))
-		return 0;
-
-	timeout = jiffies + 10*HZ;
-	while (time_before(jiffies, timeout)) {
-		if (!(hwrpb->txrdy & cpumask))
-			return 0;
-		udelay(10);
-		barrier();
-	}
-
-	return -1;
-}
-
-/*
- * Send a message to a secondary's console.  "START" is one such
- * interesting message.  ;-)
- */
-static void __cpuinit
-send_secondary_console_msg(char *str, int cpuid)
-{
-	struct percpu_struct *cpu;
-	register char *cp1, *cp2;
-	unsigned long cpumask;
-	size_t len;
-
-	cpu = (struct percpu_struct *)
-		((char*)hwrpb
-		 + hwrpb->processor_offset
-		 + cpuid * hwrpb->processor_size);
-
-	cpumask = (1UL << cpuid);
-	if (wait_for_txrdy(cpumask))
-		goto timeout;
-
-	cp2 = str;
-	len = strlen(cp2);
-	*(unsigned int *)&cpu->ipc_buffer[0] = len;
-	cp1 = (char *) &cpu->ipc_buffer[1];
-	memcpy(cp1, cp2, len);
-
-	/* atomic test and set */
-	wmb();
-	set_bit(cpuid, &hwrpb->rxrdy);
-
-	if (wait_for_txrdy(cpumask))
-		goto timeout;
-	return;
-
- timeout:
-	printk("Processor %x not ready\n", cpuid);
-}
-
-/*
- * A secondary console wants to send a message.  Receive it.
- */
-static void
-recv_secondary_console_msg(void)
-{
-	int mycpu, i, cnt;
-	unsigned long txrdy = hwrpb->txrdy;
-	char *cp1, *cp2, buf[80];
-	struct percpu_struct *cpu;
-
-	DBGS(("recv_secondary_console_msg: TXRDY 0x%lx.\n", txrdy));
-
-	mycpu = hard_smp_processor_id();
-
-	for (i = 0; i < NR_CPUS; i++) {
-		if (!(txrdy & (1UL << i)))
-			continue;
-
-		DBGS(("recv_secondary_console_msg: "
-		      "TXRDY contains CPU %d.\n", i));
-
-		cpu = (struct percpu_struct *)
-		  ((char*)hwrpb
-		   + hwrpb->processor_offset
-		   + i * hwrpb->processor_size);
-
- 		DBGS(("recv_secondary_console_msg: on %d from %d"
-		      " HALT_REASON 0x%lx FLAGS 0x%lx\n",
-		      mycpu, i, cpu->halt_reason, cpu->flags));
-
-		cnt = cpu->ipc_buffer[0] >> 32;
-		if (cnt <= 0 || cnt >= 80)
-			strcpy(buf, "<<< BOGUS MSG >>>");
-		else {
-			cp1 = (char *) &cpu->ipc_buffer[11];
-			cp2 = buf;
-			strcpy(cp2, cp1);
-			
-			while ((cp2 = strchr(cp2, '\r')) != 0) {
-				*cp2 = ' ';
-				if (cp2[1] == '\n')
-					cp2[1] = ' ';
-			}
-		}
-
-		DBGS((KERN_INFO "recv_secondary_console_msg: on %d "
-		      "message is '%s'\n", mycpu, buf));
-	}
-
-	hwrpb->txrdy = 0;
-}
-
-/*
- * Convince the console to have a secondary cpu begin execution.
- */
-static int __cpuinit
-secondary_cpu_start(int cpuid, struct task_struct *idle)
-{
-	struct percpu_struct *cpu;
-	struct pcb_struct *hwpcb, *ipcb;
-	unsigned long timeout;
-	  
-	cpu = (struct percpu_struct *)
-		((char*)hwrpb
-		 + hwrpb->processor_offset
-		 + cpuid * hwrpb->processor_size);
-	hwpcb = (struct pcb_struct *) cpu->hwpcb;
-	ipcb = &task_thread_info(idle)->pcb;
-
-	/* Initialize the CPU's HWPCB to something just good enough for
-	   us to get started.  Immediately after starting, we'll swpctx
-	   to the target idle task's pcb.  Reuse the stack in the mean
-	   time.  Precalculate the target PCBB.  */
-	hwpcb->ksp = (unsigned long)ipcb + sizeof(union thread_union) - 16;
-	hwpcb->usp = 0;
-	hwpcb->ptbr = ipcb->ptbr;
-	hwpcb->pcc = 0;
-	hwpcb->asn = 0;
-	hwpcb->unique = virt_to_phys(ipcb);
-	hwpcb->flags = ipcb->flags;
-	hwpcb->res1 = hwpcb->res2 = 0;
-
-#if 0
-	DBGS(("KSP 0x%lx PTBR 0x%lx VPTBR 0x%lx UNIQUE 0x%lx\n",
-	      hwpcb->ksp, hwpcb->ptbr, hwrpb->vptb, hwpcb->unique));
-#endif
-	DBGS(("Starting secondary cpu %d: state 0x%lx pal_flags 0x%lx\n",
-	      cpuid, idle->state, ipcb->flags));
-
-	/* Setup HWRPB fields that SRM uses to activate secondary CPU */
-	hwrpb->CPU_restart = __smp_callin;
-	hwrpb->CPU_restart_data = (unsigned long) __smp_callin;
-
-	/* Recalculate and update the HWRPB checksum */
-	hwrpb_update_checksum(hwrpb);
-
-	/*
-	 * Send a "start" command to the specified processor.
-	 */
-
-	/* SRM III 3.4.1.3 */
-	cpu->flags |= 0x22;	/* turn on Context Valid and Restart Capable */
-	cpu->flags &= ~1;	/* turn off Bootstrap In Progress */
-	wmb();
-
-	send_secondary_console_msg("START\r\n", cpuid);
-
-	/* Wait 10 seconds for an ACK from the console.  */
-	timeout = jiffies + 10*HZ;
-	while (time_before(jiffies, timeout)) {
-		if (cpu->flags & 1)
-			goto started;
-		udelay(10);
-		barrier();
-	}
-	printk(KERN_ERR "SMP: Processor %d failed to start.\n", cpuid);
-	return -1;
-
- started:
-	DBGS(("secondary_cpu_start: SUCCESS for CPU %d!!!\n", cpuid));
-	return 0;
-}
-
-/*
- * Bring one cpu online.
- */
-static int __cpuinit
-smp_boot_one_cpu(int cpuid)
-{
-	struct task_struct *idle;
-	unsigned long timeout;
-
-	/* Cook up an idler for this guy.  Note that the address we
-	   give to kernel_thread is irrelevant -- it's going to start
-	   where HWRPB.CPU_restart says to start.  But this gets all
-	   the other task-y sort of data structures set up like we
-	   wish.  We can't use kernel_thread since we must avoid
-	   rescheduling the child.  */
-	idle = fork_idle(cpuid);
-	if (IS_ERR(idle))
-		panic("failed fork for CPU %d", cpuid);
-
-	DBGS(("smp_boot_one_cpu: CPU %d state 0x%lx flags 0x%lx\n",
-	      cpuid, idle->state, idle->flags));
-
-	/* Signal the secondary to wait a moment.  */
-	smp_secondary_alive = -1;
-
-	/* Whirrr, whirrr, whirrrrrrrrr... */
-	if (secondary_cpu_start(cpuid, idle))
-		return -1;
-
-	/* Notify the secondary CPU it can run calibrate_delay.  */
-	mb();
-	smp_secondary_alive = 0;
-
-	/* We've been acked by the console; wait one second for
-	   the task to start up for real.  */
-	timeout = jiffies + 1*HZ;
-	while (time_before(jiffies, timeout)) {
-		if (smp_secondary_alive == 1)
-			goto alive;
-		udelay(10);
-		barrier();
-	}
-
-	/* We failed to boot the CPU.  */
-
-	printk(KERN_ERR "SMP: Processor %d is stuck.\n", cpuid);
-	return -1;
-
- alive:
-	/* Another "Red Snapper". */
-	return 0;
-}
-
-/*
- * Called from setup_arch.  Detect an SMP system and which processors
- * are present.
- */
-void __init
-setup_smp(void)
-{
-	struct percpu_struct *cpubase, *cpu;
-	unsigned long i;
-
-	if (boot_cpuid != 0) {
-		printk(KERN_WARNING "SMP: Booting off cpu %d instead of 0?\n",
-		       boot_cpuid);
-	}
-
-	if (hwrpb->nr_processors > 1) {
-		int boot_cpu_palrev;
-
-		DBGS(("setup_smp: nr_processors %ld\n",
-		      hwrpb->nr_processors));
-
-		cpubase = (struct percpu_struct *)
-			((char*)hwrpb + hwrpb->processor_offset);
-		boot_cpu_palrev = cpubase->pal_revision;
-
-		for (i = 0; i < hwrpb->nr_processors; i++) {
-			cpu = (struct percpu_struct *)
-				((char *)cpubase + i*hwrpb->processor_size);
-			if ((cpu->flags & 0x1cc) == 0x1cc) {
-				smp_num_probed++;
-				set_cpu_possible(i, true);
-				set_cpu_present(i, true);
-				cpu->pal_revision = boot_cpu_palrev;
-			}
-
-			DBGS(("setup_smp: CPU %d: flags 0x%lx type 0x%lx\n",
-			      i, cpu->flags, cpu->type));
-			DBGS(("setup_smp: CPU %d: PAL rev 0x%lx\n",
-			      i, cpu->pal_revision));
-		}
-	} else {
-		smp_num_probed = 1;
-	}
-
-	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
-	       smp_num_probed, cpumask_bits(cpu_present_mask)[0]);
-}
-
-/*
- * Called by smp_init prepare the secondaries
- */
-void __init
-smp_prepare_cpus(unsigned int max_cpus)
-{
-	/* Take care of some initial bookkeeping.  */
-	memset(ipi_data, 0, sizeof(ipi_data));
-
-	current_thread_info()->cpu = boot_cpuid;
-
-	smp_store_cpu_info(boot_cpuid);
-	smp_setup_percpu_timer(boot_cpuid);
-
-	/* Nothing to do on a UP box, or when told not to.  */
-	if (smp_num_probed == 1 || max_cpus == 0) {
-		init_cpu_possible(cpumask_of(boot_cpuid));
-		init_cpu_present(cpumask_of(boot_cpuid));
-		printk(KERN_INFO "SMP mode deactivated.\n");
-		return;
-	}
-
-	printk(KERN_INFO "SMP starting up secondaries.\n");
-
-	smp_num_cpus = smp_num_probed;
-}
-
-void __devinit
-smp_prepare_boot_cpu(void)
-{
-}
-
-int __cpuinit
-__cpu_up(unsigned int cpu)
-{
-	smp_boot_one_cpu(cpu);
-
-	return cpu_online(cpu) ? 0 : -ENOSYS;
-}
-
-void __init
-smp_cpus_done(unsigned int max_cpus)
-{
-	int cpu;
-	unsigned long bogosum = 0;
-
-	for(cpu = 0; cpu < NR_CPUS; cpu++) 
-		if (cpu_online(cpu))
-			bogosum += cpu_data[cpu].loops_per_jiffy;
-	
-	printk(KERN_INFO "SMP: Total of %d processors activated "
-	       "(%lu.%02lu BogoMIPS).\n",
-	       num_online_cpus(), 
-	       (bogosum + 2500) / (500000/HZ),
-	       ((bogosum + 2500) / (5000/HZ)) % 100);
-}
-
-
-void
-smp_percpu_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	int cpu = smp_processor_id();
-	unsigned long user = user_mode(regs);
-	struct cpuinfo_alpha *data = &cpu_data[cpu];
-
-	old_regs = set_irq_regs(regs);
-
-	/* Record kernel PC.  */
-	profile_tick(CPU_PROFILING);
-
-	if (!--data->prof_counter) {
-		/* We need to make like a normal interrupt -- otherwise
-		   timer interrupts ignore the global interrupt lock,
-		   which would be a Bad Thing.  */
-		irq_enter();
-
-		update_process_times(user);
-
-		data->prof_counter = data->prof_multiplier;
-
-		irq_exit();
-	}
-	set_irq_regs(old_regs);
-}
-
-int
-setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
-
-static void
-send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
-{
-	int i;
-
-	mb();
-	for_each_cpu(i, to_whom)
-		set_bit(operation, &ipi_data[i].bits);
-
-	mb();
-	for_each_cpu(i, to_whom)
-		wripir(i);
-}
-
-void
-handle_ipi(struct pt_regs *regs)
-{
-	int this_cpu = smp_processor_id();
-	unsigned long *pending_ipis = &ipi_data[this_cpu].bits;
-	unsigned long ops;
-
-#if 0
-	DBGS(("handle_ipi: on CPU %d ops 0x%lx PC 0x%lx\n",
-	      this_cpu, *pending_ipis, regs->pc));
-#endif
-
-	mb();	/* Order interrupt and bit testing. */
-	while ((ops = xchg(pending_ipis, 0)) != 0) {
-	  mb();	/* Order bit clearing and data access. */
-	  do {
-		unsigned long which;
-
-		which = ops & -ops;
-		ops &= ~which;
-		which = __ffs(which);
-
-		switch (which) {
-		case IPI_RESCHEDULE:
-			scheduler_ipi();
-			break;
-
-		case IPI_CALL_FUNC:
-			generic_smp_call_function_interrupt();
-			break;
-
-		case IPI_CALL_FUNC_SINGLE:
-			generic_smp_call_function_single_interrupt();
-			break;
-
-		case IPI_CPU_STOP:
-			halt();
-
-		default:
-			printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n",
-			       this_cpu, which);
-			break;
-		}
-	  } while (ops);
-
-	  mb();	/* Order data access and bit testing. */
-	}
-
-	cpu_data[this_cpu].ipi_count++;
-
-	if (hwrpb->txrdy)
-		recv_secondary_console_msg();
-}
-
-void
-smp_send_reschedule(int cpu)
-{
-#ifdef DEBUG_IPI_MSG
-	if (cpu == hard_smp_processor_id())
-		printk(KERN_WARNING
-		       "smp_send_reschedule: Sending IPI to self.\n");
-#endif
-	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
-}
-
-void
-smp_send_stop(void)
-{
-	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
-	cpumask_clear_cpu(smp_processor_id(), &to_whom);
-#ifdef DEBUG_IPI_MSG
-	if (hard_smp_processor_id() != boot_cpu_id)
-		printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
-#endif
-	send_ipi_message(&to_whom, IPI_CPU_STOP);
-}
-
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-	send_ipi_message(mask, IPI_CALL_FUNC);
-}
-
-void arch_send_call_function_single_ipi(int cpu)
-{
-	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
-}
-
-static void
-ipi_imb(void *ignored)
-{
-	imb();
-}
-
-void
-smp_imb(void)
-{
-	/* Must wait other processors to flush their icache before continue. */
-	if (on_each_cpu(ipi_imb, NULL, 1))
-		printk(KERN_CRIT "smp_imb: timed out\n");
-}
-EXPORT_SYMBOL(smp_imb);
-
-static void
-ipi_flush_tlb_all(void *ignored)
-{
-	tbia();
-}
-
-void
-flush_tlb_all(void)
-{
-	/* Although we don't have any data to pass, we do want to
-	   synchronize with the other processors.  */
-	if (on_each_cpu(ipi_flush_tlb_all, NULL, 1)) {
-		printk(KERN_CRIT "flush_tlb_all: timed out\n");
-	}
-}
-
-#define asn_locked() (cpu_data[smp_processor_id()].asn_lock)
-
-static void
-ipi_flush_tlb_mm(void *x)
-{
-	struct mm_struct *mm = (struct mm_struct *) x;
-	if (mm == current->active_mm && !asn_locked())
-		flush_tlb_current(mm);
-	else
-		flush_tlb_other(mm);
-}
-
-void
-flush_tlb_mm(struct mm_struct *mm)
-{
-	preempt_disable();
-
-	if (mm == current->active_mm) {
-		flush_tlb_current(mm);
-		if (atomic_read(&mm->mm_users) <= 1) {
-			int cpu, this_cpu = smp_processor_id();
-			for (cpu = 0; cpu < NR_CPUS; cpu++) {
-				if (!cpu_online(cpu) || cpu == this_cpu)
-					continue;
-				if (mm->context[cpu])
-					mm->context[cpu] = 0;
-			}
-			preempt_enable();
-			return;
-		}
-	}
-
-	if (smp_call_function(ipi_flush_tlb_mm, mm, 1)) {
-		printk(KERN_CRIT "flush_tlb_mm: timed out\n");
-	}
-
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_mm);
-
-struct flush_tlb_page_struct {
-	struct vm_area_struct *vma;
-	struct mm_struct *mm;
-	unsigned long addr;
-};
-
-static void
-ipi_flush_tlb_page(void *x)
-{
-	struct flush_tlb_page_struct *data = (struct flush_tlb_page_struct *)x;
-	struct mm_struct * mm = data->mm;
-
-	if (mm == current->active_mm && !asn_locked())
-		flush_tlb_current_page(mm, data->vma, data->addr);
-	else
-		flush_tlb_other(mm);
-}
-
-void
-flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	struct flush_tlb_page_struct data;
-	struct mm_struct *mm = vma->vm_mm;
-
-	preempt_disable();
-
-	if (mm == current->active_mm) {
-		flush_tlb_current_page(mm, vma, addr);
-		if (atomic_read(&mm->mm_users) <= 1) {
-			int cpu, this_cpu = smp_processor_id();
-			for (cpu = 0; cpu < NR_CPUS; cpu++) {
-				if (!cpu_online(cpu) || cpu == this_cpu)
-					continue;
-				if (mm->context[cpu])
-					mm->context[cpu] = 0;
-			}
-			preempt_enable();
-			return;
-		}
-	}
-
-	data.vma = vma;
-	data.mm = mm;
-	data.addr = addr;
-
-	if (smp_call_function(ipi_flush_tlb_page, &data, 1)) {
-		printk(KERN_CRIT "flush_tlb_page: timed out\n");
-	}
-
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_page);
-
-void
-flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
-{
-	/* On the Alpha we always flush the whole user tlb.  */
-	flush_tlb_mm(vma->vm_mm);
-}
-EXPORT_SYMBOL(flush_tlb_range);
-
-static void
-ipi_flush_icache_page(void *x)
-{
-	struct mm_struct *mm = (struct mm_struct *) x;
-	if (mm == current->active_mm && !asn_locked())
-		__load_new_mm_context(mm);
-	else
-		flush_tlb_other(mm);
-}
-
-void
-flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			unsigned long addr, int len)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	if ((vma->vm_flags & VM_EXEC) == 0)
-		return;
-
-	preempt_disable();
-
-	if (mm == current->active_mm) {
-		__load_new_mm_context(mm);
-		if (atomic_read(&mm->mm_users) <= 1) {
-			int cpu, this_cpu = smp_processor_id();
-			for (cpu = 0; cpu < NR_CPUS; cpu++) {
-				if (!cpu_online(cpu) || cpu == this_cpu)
-					continue;
-				if (mm->context[cpu])
-					mm->context[cpu] = 0;
-			}
-			preempt_enable();
-			return;
-		}
-	}
-
-	if (smp_call_function(ipi_flush_icache_page, mm, 1)) {
-		printk(KERN_CRIT "flush_icache_page: timed out\n");
-	}
-
-	preempt_enable();
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/srm_env.c b/ANDROID_3.4.5/arch/alpha/kernel/srm_env.c
deleted file mode 100644
index b9fc6c30..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/srm_env.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * srm_env.c - Access to SRM environment
- *             variables through linux' procfs
- *
- * (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
- *
- * This driver is a modified version of Erik Mouw's example proc
- * interface, so: thank you, Erik! He can be reached via email at
- * <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
- * provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
- * included a patch like this as well. Thanks for idea!
- *
- * This program is free software; you can redistribute
- * it and/or modify it under the terms of the GNU General
- * Public License version 2 as published by the Free Software
- * Foundation.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <asm/console.h>
-#include <asm/uaccess.h>
-#include <asm/machvec.h>
-
-#define BASE_DIR	"srm_environment"	/* Subdir in /proc/		*/
-#define NAMED_DIR	"named_variables"	/* Subdir for known variables	*/
-#define NUMBERED_DIR	"numbered_variables"	/* Subdir for all variables	*/
-#define VERSION		"0.0.6"			/* Module version		*/
-#define NAME		"srm_env"		/* Module name			*/
-
-MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION("Accessing Alpha SRM environment through procfs interface");
-MODULE_LICENSE("GPL");
-
-typedef struct _srm_env {
-	char			*name;
-	unsigned long		id;
-	struct proc_dir_entry	*proc_entry;
-} srm_env_t;
-
-static struct proc_dir_entry	*base_dir;
-static struct proc_dir_entry	*named_dir;
-static struct proc_dir_entry	*numbered_dir;
-static char			number[256][4];
-
-static srm_env_t	srm_named_entries[] = {
-	{ "auto_action",	ENV_AUTO_ACTION		},
-	{ "boot_dev",		ENV_BOOT_DEV		},
-	{ "bootdef_dev",	ENV_BOOTDEF_DEV		},
-	{ "booted_dev",		ENV_BOOTED_DEV		},
-	{ "boot_file",		ENV_BOOT_FILE		},
-	{ "booted_file",	ENV_BOOTED_FILE		},
-	{ "boot_osflags",	ENV_BOOT_OSFLAGS	},
-	{ "booted_osflags",	ENV_BOOTED_OSFLAGS	},
-	{ "boot_reset",		ENV_BOOT_RESET		},
-	{ "dump_dev",		ENV_DUMP_DEV		},
-	{ "enable_audit",	ENV_ENABLE_AUDIT	},
-	{ "license",		ENV_LICENSE		},
-	{ "char_set",		ENV_CHAR_SET		},
-	{ "language",		ENV_LANGUAGE		},
-	{ "tty_dev",		ENV_TTY_DEV		},
-	{ NULL,			0			},
-};
-static srm_env_t	srm_numbered_entries[256];
-
-
-static int srm_env_proc_show(struct seq_file *m, void *v)
-{
-	unsigned long	ret;
-	srm_env_t	*entry;
-	char		*page;
-
-	entry = m->private;
-	page = (char *)__get_free_page(GFP_USER);
-	if (!page)
-		return -ENOMEM;
-
-	ret = callback_getenv(entry->id, page, PAGE_SIZE);
-
-	if ((ret >> 61) == 0) {
-		seq_write(m, page, ret);
-		ret = 0;
-	} else
-		ret = -EFAULT;
-	free_page((unsigned long)page);
-	return ret;
-}
-
-static int srm_env_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, srm_env_proc_show, PDE(inode)->data);
-}
-
-static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
-				  size_t count, loff_t *pos)
-{
-	int res;
-	srm_env_t	*entry = PDE(file->f_path.dentry->d_inode)->data;
-	char		*buf = (char *) __get_free_page(GFP_USER);
-	unsigned long	ret1, ret2;
-
-	if (!buf)
-		return -ENOMEM;
-
-	res = -EINVAL;
-	if (count >= PAGE_SIZE)
-		goto out;
-
-	res = -EFAULT;
-	if (copy_from_user(buf, buffer, count))
-		goto out;
-	buf[count] = '\0';
-
-	ret1 = callback_setenv(entry->id, buf, count);
-	if ((ret1 >> 61) == 0) {
-		do
-			ret2 = callback_save_env();
-		while((ret2 >> 61) == 1);
-		res = (int) ret1;
-	}
-
- out:
-	free_page((unsigned long)buf);
-	return res;
-}
-
-static const struct file_operations srm_env_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= srm_env_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= srm_env_proc_write,
-};
-
-static void
-srm_env_cleanup(void)
-{
-	srm_env_t	*entry;
-	unsigned long	var_num;
-
-	if (base_dir) {
-		/*
-		 * Remove named entries
-		 */
-		if (named_dir) {
-			entry = srm_named_entries;
-			while (entry->name != NULL && entry->id != 0) {
-				if (entry->proc_entry) {
-					remove_proc_entry(entry->name,
-							named_dir);
-					entry->proc_entry = NULL;
-				}
-				entry++;
-			}
-			remove_proc_entry(NAMED_DIR, base_dir);
-		}
-
-		/*
-		 * Remove numbered entries
-		 */
-		if (numbered_dir) {
-			for (var_num = 0; var_num <= 255; var_num++) {
-				entry =	&srm_numbered_entries[var_num];
-
-				if (entry->proc_entry) {
-					remove_proc_entry(entry->name,
-							numbered_dir);
-					entry->proc_entry	= NULL;
-					entry->name		= NULL;
-				}
-			}
-			remove_proc_entry(NUMBERED_DIR, base_dir);
-		}
-
-		remove_proc_entry(BASE_DIR, NULL);
-	}
-
-	return;
-}
-
-static int __init
-srm_env_init(void)
-{
-	srm_env_t	*entry;
-	unsigned long	var_num;
-
-	/*
-	 * Check system
-	 */
-	if (!alpha_using_srm) {
-		printk(KERN_INFO "%s: This Alpha system doesn't "
-				"know about SRM (or you've booted "
-				"SRM->MILO->Linux, which gets "
-				"misdetected)...\n", __func__);
-		return -ENODEV;
-	}
-
-	/*
-	 * Init numbers
-	 */
-	for (var_num = 0; var_num <= 255; var_num++)
-		sprintf(number[var_num], "%ld", var_num);
-
-	/*
-	 * Create base directory
-	 */
-	base_dir = proc_mkdir(BASE_DIR, NULL);
-	if (!base_dir) {
-		printk(KERN_ERR "Couldn't create base dir /proc/%s\n",
-				BASE_DIR);
-		goto cleanup;
-	}
-
-	/*
-	 * Create per-name subdirectory
-	 */
-	named_dir = proc_mkdir(NAMED_DIR, base_dir);
-	if (!named_dir) {
-		printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
-				BASE_DIR, NAMED_DIR);
-		goto cleanup;
-	}
-
-	/*
-	 * Create per-number subdirectory
-	 */
-	numbered_dir = proc_mkdir(NUMBERED_DIR, base_dir);
-	if (!numbered_dir) {
-		printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
-				BASE_DIR, NUMBERED_DIR);
-		goto cleanup;
-
-	}
-
-	/*
-	 * Create all named nodes
-	 */
-	entry = srm_named_entries;
-	while (entry->name && entry->id) {
-		entry->proc_entry = proc_create_data(entry->name, 0644, named_dir,
-						     &srm_env_proc_fops, entry);
-		if (!entry->proc_entry)
-			goto cleanup;
-		entry++;
-	}
-
-	/*
-	 * Create all numbered nodes
-	 */
-	for (var_num = 0; var_num <= 255; var_num++) {
-		entry = &srm_numbered_entries[var_num];
-		entry->name = number[var_num];
-
-		entry->proc_entry = proc_create_data(entry->name, 0644, numbered_dir,
-						     &srm_env_proc_fops, entry);
-		if (!entry->proc_entry)
-			goto cleanup;
-
-		entry->id			= var_num;
-	}
-
-	printk(KERN_INFO "%s: version %s loaded successfully\n", NAME,
-			VERSION);
-
-	return 0;
-
-cleanup:
-	srm_env_cleanup();
-
-	return -ENOMEM;
-}
-
-static void __exit
-srm_env_exit(void)
-{
-	srm_env_cleanup();
-	printk(KERN_INFO "%s: unloaded successfully\n", NAME);
-
-	return;
-}
-
-module_init(srm_env_init);
-module_exit(srm_env_exit);
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/srmcons.c b/ANDROID_3.4.5/arch/alpha/kernel/srmcons.c
deleted file mode 100644
index 3ea80943..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/srmcons.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/srmcons.c
- *
- * Callback based driver for SRM Console console device.
- * (TTY driver and console driver)
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-
-#include <asm/console.h>
-#include <asm/uaccess.h>
-
-
-static DEFINE_SPINLOCK(srmcons_callback_lock);
-static int srm_is_registered_console = 0;
-
-/* 
- * The TTY driver
- */
-#define MAX_SRM_CONSOLE_DEVICES 1	/* only support 1 console device */
-
-struct srmcons_private {
-	struct tty_port port;
-	struct timer_list timer;
-} srmcons_singleton;
-
-typedef union _srmcons_result {
-	struct {
-		unsigned long c :61;
-		unsigned long status :3;
-	} bits;
-	long as_long;
-} srmcons_result;
-
-/* called with callback_lock held */
-static int
-srmcons_do_receive_chars(struct tty_struct *tty)
-{
-	srmcons_result result;
-	int count = 0, loops = 0;
-
-	do {
-		result.as_long = callback_getc(0);
-		if (result.bits.status < 2) {
-			tty_insert_flip_char(tty, (char)result.bits.c, 0);
-			count++;
-		}
-	} while((result.bits.status & 1) && (++loops < 10));
-
-	if (count)
-		tty_schedule_flip(tty);
-
-	return count;
-}
-
-static void
-srmcons_receive_chars(unsigned long data)
-{
-	struct srmcons_private *srmconsp = (struct srmcons_private *)data;
-	struct tty_port *port = &srmconsp->port;
-	unsigned long flags;
-	int incr = 10;
-
-	local_irq_save(flags);
-	if (spin_trylock(&srmcons_callback_lock)) {
-		if (!srmcons_do_receive_chars(port->tty))
-			incr = 100;
-		spin_unlock(&srmcons_callback_lock);
-	} 
-
-	spin_lock(&port->lock);
-	if (port->tty)
-		mod_timer(&srmconsp->timer, jiffies + incr);
-	spin_unlock(&port->lock);
-
-	local_irq_restore(flags);
-}
-
-/* called with callback_lock held */
-static int
-srmcons_do_write(struct tty_struct *tty, const char *buf, int count)
-{
-	static char str_cr[1] = "\r";
-	long c, remaining = count;
-	srmcons_result result;
-	char *cur;
-	int need_cr;
-
-	for (cur = (char *)buf; remaining > 0; ) {
-		need_cr = 0;
-		/* 
-		 * Break it up into reasonable size chunks to allow a chance
-		 * for input to get in
-		 */
-		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
-			if (cur[c] == '\n')
-				need_cr = 1;
-		
-		while (c > 0) {
-			result.as_long = callback_puts(0, cur, c);
-			c -= result.bits.c;
-			remaining -= result.bits.c;
-			cur += result.bits.c;
-
-			/*
-			 * Check for pending input iff a tty was provided
-			 */
-			if (tty)
-				srmcons_do_receive_chars(tty);
-		}
-
-		while (need_cr) {
-			result.as_long = callback_puts(0, str_cr, 1);
-			if (result.bits.c > 0)
-				need_cr = 0;
-		}
-	}
-	return count;
-}
-
-static int
-srmcons_write(struct tty_struct *tty,
-	      const unsigned char *buf, int count)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty, (const char *) buf, count);
-	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
-
-	return count;
-}
-
-static int
-srmcons_write_room(struct tty_struct *tty)
-{
-	return 512;
-}
-
-static int
-srmcons_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
-static int
-srmcons_open(struct tty_struct *tty, struct file *filp)
-{
-	struct srmcons_private *srmconsp = &srmcons_singleton;
-	struct tty_port *port = &srmconsp->port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	if (!port->tty) {
-		tty->driver_data = srmconsp;
-		tty->port = port;
-		port->tty = tty; /* XXX proper refcounting */
-		mod_timer(&srmconsp->timer, jiffies + 10);
-	}
-
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	return 0;
-}
-
-static void
-srmcons_close(struct tty_struct *tty, struct file *filp)
-{
-	struct srmcons_private *srmconsp = tty->driver_data;
-	struct tty_port *port = &srmconsp->port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	if (tty->count == 1) {
-		port->tty = NULL;
-		del_timer(&srmconsp->timer);
-	}
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-
-static struct tty_driver *srmcons_driver;
-
-static const struct tty_operations srmcons_ops = {
-	.open		= srmcons_open,
-	.close		= srmcons_close,
-	.write		= srmcons_write,
-	.write_room	= srmcons_write_room,
-	.chars_in_buffer= srmcons_chars_in_buffer,
-};
-
-static int __init
-srmcons_init(void)
-{
-	tty_port_init(&srmcons_singleton.port);
-	setup_timer(&srmcons_singleton.timer, srmcons_receive_chars,
-			(unsigned long)&srmcons_singleton);
-	if (srm_is_registered_console) {
-		struct tty_driver *driver;
-		int err;
-
-		driver = alloc_tty_driver(MAX_SRM_CONSOLE_DEVICES);
-		if (!driver)
-			return -ENOMEM;
-		driver->driver_name = "srm";
-		driver->name = "srm";
-		driver->major = 0; 	/* dynamic */
-		driver->minor_start = 0;
-		driver->type = TTY_DRIVER_TYPE_SYSTEM;
-		driver->subtype = SYSTEM_TYPE_SYSCONS;
-		driver->init_termios = tty_std_termios;
-		tty_set_operations(driver, &srmcons_ops);
-		err = tty_register_driver(driver);
-		if (err) {
-			put_tty_driver(driver);
-			return err;
-		}
-		srmcons_driver = driver;
-	}
-
-	return -ENODEV;
-}
-
-module_init(srmcons_init);
-
-
-/*
- * The console driver
- */
-static void
-srm_console_write(struct console *co, const char *s, unsigned count)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(NULL, s, count);
-	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
-}
-
-static struct tty_driver *
-srm_console_device(struct console *co, int *index)
-{
-	*index = co->index;
-	return srmcons_driver;
-}
-
-static int
-srm_console_setup(struct console *co, char *options)
-{
-	return 0;
-}
-
-static struct console srmcons = {
-	.name		= "srm",
-	.write		= srm_console_write,
-	.device		= srm_console_device,
-	.setup		= srm_console_setup,
-	.flags		= CON_PRINTBUFFER | CON_BOOT,
-	.index		= -1,
-};
-
-void __init
-register_srm_console(void)
-{
-	if (!srm_is_registered_console) {
-		callback_open_console();
-		register_console(&srmcons);
-		srm_is_registered_console = 1;
-	}
-}
-
-void __init
-unregister_srm_console(void)
-{
-	if (srm_is_registered_console) {
-		callback_close_console();
-		unregister_console(&srmcons);
-		srm_is_registered_console = 0;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_alcor.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_alcor.c
deleted file mode 100644
index 118dc6af..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_alcor.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_alcor.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the ALCOR and XLT (XL-300/366/433).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/reboot.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/mmu_context.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/core_cia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for ENABLED irqs.  */
-static unsigned long cached_irq_mask;
-
-static inline void
-alcor_update_irq_hw(unsigned long mask)
-{
-	*(vuip)GRU_INT_MASK = mask;
-	mb();
-}
-
-static inline void
-alcor_enable_irq(struct irq_data *d)
-{
-	alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
-}
-
-static void
-alcor_disable_irq(struct irq_data *d)
-{
-	alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
-}
-
-static void
-alcor_mask_and_ack_irq(struct irq_data *d)
-{
-	alcor_disable_irq(d);
-
-	/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
-	*(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
-	*(vuip)GRU_INT_CLEAR = 0; mb();
-}
-
-static void
-alcor_isa_mask_and_ack_irq(struct irq_data *d)
-{
-	i8259a_mask_and_ack_irq(d);
-
-	/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
-	*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
-	*(vuip)GRU_INT_CLEAR = 0; mb();
-}
-
-static struct irq_chip alcor_irq_type = {
-	.name		= "ALCOR",
-	.irq_unmask	= alcor_enable_irq,
-	.irq_mask	= alcor_disable_irq,
-	.irq_mask_ack	= alcor_mask_and_ack_irq,
-};
-
-static void
-alcor_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary register of the GRU */
-	pld = (*(vuip)GRU_INT_REQ) & GRU_INT_REQ_BITS;
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1; /* clear least bit set */
-		if (i == 31) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-alcor_init_irq(void)
-{
-	long i;
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	*(vuip)GRU_INT_MASK  = 0; mb();			/* all disabled */
-	*(vuip)GRU_INT_EDGE  = 0; mb();			/* all are level */
-	*(vuip)GRU_INT_HILO  = 0x80000000U; mb();	/* ISA only HI */
-	*(vuip)GRU_INT_CLEAR = 0; mb();			/* all clear */
-
-	for (i = 16; i < 48; ++i) {
-		/* On Alcor, at least, lines 20..30 are not connected
-		   and can generate spurious interrupts if we turn them
-		   on while IRQ probing.  */
-		if (i >= 16+20 && i <= 16+30)
-			continue;
-		irq_set_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-	i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-
-	setup_irq(16+31, &isa_cascade_irqaction);
-}
-
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ GRU_INT_REQ:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 2
- * 1        Interrupt Line B from slot 2
- * 2        Interrupt Line C from slot 2
- * 3        Interrupt Line D from slot 2
- * 4        Interrupt Line A from slot 1
- * 5        Interrupt line B from slot 1
- * 6        Interrupt Line C from slot 1
- * 7        Interrupt Line D from slot 1
- * 8        Interrupt Line A from slot 0
- * 9        Interrupt Line B from slot 0
- *10        Interrupt Line C from slot 0
- *11        Interrupt Line D from slot 0
- *12        Interrupt Line A from slot 4
- *13        Interrupt Line B from slot 4
- *14        Interrupt Line C from slot 4
- *15        Interrupt Line D from slot 4
- *16        Interrupt Line D from slot 3
- *17        Interrupt Line D from slot 3
- *18        Interrupt Line D from slot 3
- *19        Interrupt Line D from slot 3
- *20-30     Reserved
- *31        EISA interrupt
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  6       built-in TULIP (XLT only)
- *  7       PCI on board slot 0
- *  8       PCI on board slot 3
- *  9       PCI on board slot 4
- * 10       PCEB (PCI-EISA bridge)
- * 11       PCI on board slot 2
- * 12       PCI on board slot 1
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int __init
-alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[7][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		/* note: IDSEL 17 is XLT only */
-		{16+13, 16+13, 16+13, 16+13, 16+13},	/* IdSel 17,  TULIP  */
-		{ 16+8,  16+8,  16+9, 16+10, 16+11},	/* IdSel 18,  slot 0 */
-		{16+16, 16+16, 16+17, 16+18, 16+19},	/* IdSel 19,  slot 3 */
-		{16+12, 16+12, 16+13, 16+14, 16+15},	/* IdSel 20,  slot 4 */
-		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 21,  PCEB   */
-		{ 16+0,  16+0,  16+1,  16+2,  16+3},	/* IdSel 22,  slot 2 */
-		{ 16+4,  16+4,  16+5,  16+6,  16+7},	/* IdSel 23,  slot 1 */
-	};
-	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static void
-alcor_kill_arch(int mode)
-{
-	cia_kill_arch(mode);
-
-#ifndef ALPHA_RESTORE_SRM_SETUP
-	switch(mode) {
-	case LINUX_REBOOT_CMD_RESTART:
-		/* Who said DEC engineer's have no sense of humor? ;-)  */
-		if (alpha_using_srm) {
-			*(vuip) GRU_RESET = 0x0000dead;
-			mb();
-		}
-		break;
-	case LINUX_REBOOT_CMD_HALT:
-		break;
-	case LINUX_REBOOT_CMD_POWER_OFF:
-		break;
-	}
-
-	halt();
-#endif
-}
-
-static void __init
-alcor_init_pci(void)
-{
-	struct pci_dev *dev;
-
-	cia_init_pci();
-
-	/*
-	 * Now we can look to see if we are really running on an XLT-type
-	 * motherboard, by looking for a 21040 TULIP in slot 6, which is
-	 * built into XLT and BRET/MAVERICK, but not available on ALCOR.
-	 */
-	dev = pci_get_device(PCI_VENDOR_ID_DEC,
-			      PCI_DEVICE_ID_DEC_TULIP,
-			      NULL);
-	if (dev && dev->devfn == PCI_DEVFN(6,0)) {
-		alpha_mv.sys.cia.gru_int_req_bits = XLT_GRU_INT_REQ_BITS; 
-		printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n",
-		       __func__);
-	}
-	pci_dev_put(dev);
-}
-
-
-/*
- * The System Vectors
- */
-
-struct alpha_machine_vector alcor_mv __initmv = {
-	.vector_name		= "Alcor",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= alcor_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= alcor_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alcor_init_pci,
-	.kill_arch		= alcor_kill_arch,
-	.pci_map_irq		= alcor_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .cia = {
-		.gru_int_req_bits = ALCOR_GRU_INT_REQ_BITS
-	}}
-};
-ALIAS_MV(alcor)
-
-struct alpha_machine_vector xlt_mv __initmv = {
-	.vector_name		= "XLT",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= alcor_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= alcor_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alcor_init_pci,
-	.kill_arch		= alcor_kill_arch,
-	.pci_map_irq		= alcor_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .cia = {
-		.gru_int_req_bits = XLT_GRU_INT_REQ_BITS
-	}}
-};
-
-/* No alpha_mv alias for XLT, since we compile it in unconditionally
-   with ALCOR; setup_arch knows how to cope.  */
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_cabriolet.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_cabriolet.c
deleted file mode 100644
index 4c50f8f4..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_cabriolet.c
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_cabriolet.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999, 2000 Richard Henderson
- *
- * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
- * PC164 and LX164.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_cia.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned long cached_irq_mask = ~0UL;
-
-static inline void
-cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	int ofs = (irq - 16) / 8;
-	outb(mask >> (16 + ofs * 8), 0x804 + ofs);
-}
-
-static inline void
-cabriolet_enable_irq(struct irq_data *d)
-{
-	cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
-}
-
-static void
-cabriolet_disable_irq(struct irq_data *d)
-{
-	cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
-}
-
-static struct irq_chip cabriolet_irq_type = {
-	.name		= "CABRIOLET",
-	.irq_unmask	= cabriolet_enable_irq,
-	.irq_mask	= cabriolet_disable_irq,
-	.irq_mask_ack	= cabriolet_disable_irq,
-};
-
-static void 
-cabriolet_device_interrupt(unsigned long v)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = inb(0x804) | (inb(0x805) << 8) | (inb(0x806) << 16);
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1;	/* clear least bit set */
-		if (i == 4) {
-			isa_device_interrupt(v);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-common_init_irq(void (*srm_dev_int)(unsigned long v))
-{
-	init_i8259a_irqs();
-
-	if (alpha_using_srm) {
-		alpha_mv.device_interrupt = srm_dev_int;
-		init_srm_irqs(35, 0);
-	}
-	else {
-		long i;
-
-		outb(0xff, 0x804);
-		outb(0xff, 0x805);
-		outb(0xff, 0x806);
-
-		for (i = 16; i < 35; ++i) {
-			irq_set_chip_and_handler(i, &cabriolet_irq_type,
-						 handle_level_irq);
-			irq_set_status_flags(i, IRQ_LEVEL);
-		}
-	}
-
-	common_init_isa_dma();
-	setup_irq(16+4, &isa_cascade_irqaction);
-}
-
-#ifndef CONFIG_ALPHA_PC164
-static void __init
-cabriolet_init_irq(void)
-{
-	common_init_irq(srm_device_interrupt);
-}
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
-/* In theory, the PC164 has the same interrupt hardware as the other
-   Cabriolet based systems.  However, something got screwed up late
-   in the development cycle which broke the interrupt masking hardware.
-   Repeat, it is not possible to mask and ack interrupts.  At all.
-
-   In an attempt to work around this, while processing interrupts,
-   we do not allow the IPL to drop below what it is currently.  This
-   prevents the possibility of recursion.  
-
-   ??? Another option might be to force all PCI devices to use edge
-   triggered rather than level triggered interrupts.  That might be
-   too invasive though.  */
-
-static void
-pc164_srm_device_interrupt(unsigned long v)
-{
-	__min_ipl = getipl();
-	srm_device_interrupt(v);
-	__min_ipl = 0;
-}
-
-static void
-pc164_device_interrupt(unsigned long v)
-{
-	__min_ipl = getipl();
-	cabriolet_device_interrupt(v);
-	__min_ipl = 0;
-}
-
-static void __init
-pc164_init_irq(void)
-{
-	common_init_irq(pc164_srm_device_interrupt);
-}
-#endif
-
-/*
- * The EB66+ is very similar to the EB66 except that it does not have
- * the on-board NCR and Tulip chips.  In the code below, I have used
- * slot number to refer to the id select line and *not* the slot
- * number used in the EB66+ documentation.  However, in the table,
- * I've given the slot number, the id select line and the Jxx number
- * that's printed on the board.  The interrupt pins from the PCI slots
- * are wired into 3 interrupt summary registers at 0x804, 0x805 and
- * 0x806 ISA.
- *
- * In the table, -1 means don't assign an IRQ number.  This is usually
- * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
- */
-
-static inline int __init
-eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] __initdata = {
-		/*INT  INTA  INTB  INTC   INTD */
-		{16+0, 16+0, 16+5,  16+9, 16+13},  /* IdSel 6,  slot 0, J25 */
-		{16+1, 16+1, 16+6, 16+10, 16+14},  /* IdSel 7,  slot 1, J26 */
-		{  -1,   -1,   -1,    -1,    -1},  /* IdSel 8,  SIO         */
-		{16+2, 16+2, 16+7, 16+11, 16+15},  /* IdSel 9,  slot 2, J27 */
-		{16+3, 16+3, 16+8, 16+12,  16+6}   /* IdSel 10, slot 3, J28 */
-	};
-	const long min_idsel = 6, max_idsel = 10, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The AlphaPC64 is very similar to the EB66+ except that its slots
- * are numbered differently.  In the code below, I have used slot
- * number to refer to the id select line and *not* the slot number
- * used in the AlphaPC64 documentation.  However, in the table, I've
- * given the slot number, the id select line and the Jxx number that's
- * printed on the board.  The interrupt pins from the PCI slots are
- * wired into 3 interrupt summary registers at 0x804, 0x805 and 0x806
- * ISA.
- *
- * In the table, -1 means don't assign an IRQ number.  This is usually
- * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
- */
-
-static inline int __init
-cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] __initdata = {
-		/*INT   INTA  INTB  INTC   INTD */
-		{ 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5,  slot 2, J21 */
-		{ 16+0, 16+0, 16+5,  16+9, 16+13}, /* IdSel 6,  slot 0, J19 */
-		{ 16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7,  slot 1, J20 */
-		{   -1,   -1,   -1,    -1,    -1}, /* IdSel 8,  SIO         */
-		{ 16+3, 16+3, 16+8, 16+12, 16+16}  /* IdSel 9,  slot 3, J22 */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static inline void __init
-cabriolet_enable_ide(void)
-{
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	 } else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-
-		pc873xx_enable_ide();
-	}
-}
-
-static inline void __init
-cabriolet_init_pci(void)
-{
-	common_init_pci();
-	cabriolet_enable_ide();
-}
-
-static inline void __init
-cia_cab_init_pci(void)
-{
-	cia_init_pci();
-	cabriolet_enable_ide();
-}
-
-/*
- * The PC164 and LX164 have 19 PCI interrupts, four from each of the four
- * PCI slots, the SIO, PCI/IDE, and USB.
- * 
- * Each of the interrupts can be individually masked. This is
- * accomplished by setting the appropriate bit in the mask register.
- * A bit is set by writing a "1" to the desired position in the mask
- * register and cleared by writing a "0". There are 3 mask registers
- * located at ISA address 804h, 805h and 806h.
- * 
- * An I/O read at ISA address 804h, 805h, 806h will return the
- * state of the 11 PCI interrupts and not the state of the MASKED
- * interrupts.
- * 
- * Note: A write to I/O 804h, 805h, and 806h the mask register will be
- * updated.
- * 
- * 
- * 				ISA DATA<7:0>
- * ISA     +--------------------------------------------------------------+
- * ADDRESS |   7   |   6   |   5   |   4   |   3   |   2  |   1   |   0   |
- *         +==============================================================+
- * 0x804   | INTB0 |  USB  |  IDE  |  SIO  | INTA3 |INTA2 | INTA1 | INTA0 |
- *         +--------------------------------------------------------------+
- * 0x805   | INTD0 | INTC3 | INTC2 | INTC1 | INTC0 |INTB3 | INTB2 | INTB1 |
- *         +--------------------------------------------------------------+
- * 0x806   | Rsrv  | Rsrv  | Rsrv  | Rsrv  | Rsrv  |INTD3 | INTD2 | INTD1 |
- *         +--------------------------------------------------------------+
- *         * Rsrv = reserved bits
- *         Note: The mask register is write-only.
- * 
- * IdSel	
- *   5	 32 bit PCI option slot 2
- *   6	 64 bit PCI option slot 0
- *   7	 64 bit PCI option slot 1
- *   8	 Saturn I/O
- *   9	 32 bit PCI option slot 3
- *  10	 USB
- *  11	 IDE
- * 
- */
-
-static inline int __init
-alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[7][5] __initdata = {
-		/*INT   INTA  INTB   INTC   INTD */
-		{ 16+2, 16+2, 16+9,  16+13, 16+17}, /* IdSel  5, slot 2, J20 */
-		{ 16+0, 16+0, 16+7,  16+11, 16+15}, /* IdSel  6, slot 0, J29 */
-		{ 16+1, 16+1, 16+8,  16+12, 16+16}, /* IdSel  7, slot 1, J26 */
-		{   -1,   -1,   -1,    -1,    -1},  /* IdSel  8, SIO */
-		{ 16+3, 16+3, 16+10, 16+14, 16+18}, /* IdSel  9, slot 3, J19 */
-		{ 16+6, 16+6, 16+6,  16+6,  16+6},  /* IdSel 10, USB */
-		{ 16+5, 16+5, 16+5,  16+5,  16+5}   /* IdSel 11, IDE */
-	};
-	const long min_idsel = 5, max_idsel = 11, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static inline void __init
-alphapc164_init_pci(void)
-{
-	cia_init_pci();
-	SMC93x_Init();
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
-	.vector_name		= "Cabriolet",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
-struct alpha_machine_vector eb164_mv __initmv = {
-	.vector_name		= "EB164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_cab_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb164)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
-	.vector_name		= "EB66+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= eb66p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
-struct alpha_machine_vector lx164_mv __initmv = {
-	.vector_name		= "LX164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_PYXIS_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= PYXIS_DAC_OFFSET,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= pyxis_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphapc164_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= alphapc164_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(lx164)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
-struct alpha_machine_vector pc164_mv __initmv = {
-	.vector_name		= "PC164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= pc164_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= pc164_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphapc164_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= alphapc164_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(pc164)
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_dp264.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_dp264.c
deleted file mode 100644
index 5bf401f7..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_dp264.c
+++ /dev/null
@@ -1,673 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_dp264.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996, 1999 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- *	Modified by Christopher C. Chimelis, 2001 to
- *	add support for the addition of Shark to the
- *	Tsunami family.
- *
- * Code supporting the DP264 (EV6+TSUNAMI).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_tsunami.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for ENABLED irqs.  */
-static unsigned long cached_irq_mask;
-/* dp264 boards handle at max four CPUs */
-static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
-
-DEFINE_SPINLOCK(dp264_irq_lock);
-
-static void
-tsunami_update_irq_hw(unsigned long mask)
-{
-	register tsunami_cchip *cchip = TSUNAMI_cchip;
-	unsigned long isa_enable = 1UL << 55;
-	register int bcpu = boot_cpuid;
-
-#ifdef CONFIG_SMP
-	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
-	unsigned long mask0, mask1, mask2, mask3, dummy;
-
-	mask &= ~isa_enable;
-	mask0 = mask & cpu_irq_affinity[0];
-	mask1 = mask & cpu_irq_affinity[1];
-	mask2 = mask & cpu_irq_affinity[2];
-	mask3 = mask & cpu_irq_affinity[3];
-
-	if (bcpu == 0) mask0 |= isa_enable;
-	else if (bcpu == 1) mask1 |= isa_enable;
-	else if (bcpu == 2) mask2 |= isa_enable;
-	else mask3 |= isa_enable;
-
-	dim0 = &cchip->dim0.csr;
-	dim1 = &cchip->dim1.csr;
-	dim2 = &cchip->dim2.csr;
-	dim3 = &cchip->dim3.csr;
-	if (!cpu_possible(0)) dim0 = &dummy;
-	if (!cpu_possible(1)) dim1 = &dummy;
-	if (!cpu_possible(2)) dim2 = &dummy;
-	if (!cpu_possible(3)) dim3 = &dummy;
-
-	*dim0 = mask0;
-	*dim1 = mask1;
-	*dim2 = mask2;
-	*dim3 = mask3;
-	mb();
-	*dim0;
-	*dim1;
-	*dim2;
-	*dim3;
-#else
-	volatile unsigned long *dimB;
-	if (bcpu == 0) dimB = &cchip->dim0.csr;
-	else if (bcpu == 1) dimB = &cchip->dim1.csr;
-	else if (bcpu == 2) dimB = &cchip->dim2.csr;
-	else dimB = &cchip->dim3.csr;
-
-	*dimB = mask | isa_enable;
-	mb();
-	*dimB;
-#endif
-}
-
-static void
-dp264_enable_irq(struct irq_data *d)
-{
-	spin_lock(&dp264_irq_lock);
-	cached_irq_mask |= 1UL << d->irq;
-	tsunami_update_irq_hw(cached_irq_mask);
-	spin_unlock(&dp264_irq_lock);
-}
-
-static void
-dp264_disable_irq(struct irq_data *d)
-{
-	spin_lock(&dp264_irq_lock);
-	cached_irq_mask &= ~(1UL << d->irq);
-	tsunami_update_irq_hw(cached_irq_mask);
-	spin_unlock(&dp264_irq_lock);
-}
-
-static void
-clipper_enable_irq(struct irq_data *d)
-{
-	spin_lock(&dp264_irq_lock);
-	cached_irq_mask |= 1UL << (d->irq - 16);
-	tsunami_update_irq_hw(cached_irq_mask);
-	spin_unlock(&dp264_irq_lock);
-}
-
-static void
-clipper_disable_irq(struct irq_data *d)
-{
-	spin_lock(&dp264_irq_lock);
-	cached_irq_mask &= ~(1UL << (d->irq - 16));
-	tsunami_update_irq_hw(cached_irq_mask);
-	spin_unlock(&dp264_irq_lock);
-}
-
-static void
-cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
-{
-	int cpu;
-
-	for (cpu = 0; cpu < 4; cpu++) {
-		unsigned long aff = cpu_irq_affinity[cpu];
-		if (cpumask_test_cpu(cpu, &affinity))
-			aff |= 1UL << irq;
-		else
-			aff &= ~(1UL << irq);
-		cpu_irq_affinity[cpu] = aff;
-	}
-}
-
-static int
-dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
-		   bool force)
-{
-	spin_lock(&dp264_irq_lock);
-	cpu_set_irq_affinity(d->irq, *affinity);
-	tsunami_update_irq_hw(cached_irq_mask);
-	spin_unlock(&dp264_irq_lock);
-
-	return 0;
-}
-
-static int
-clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
-		     bool force)
-{
-	spin_lock(&dp264_irq_lock);
-	cpu_set_irq_affinity(d->irq - 16, *affinity);
-	tsunami_update_irq_hw(cached_irq_mask);
-	spin_unlock(&dp264_irq_lock);
-
-	return 0;
-}
-
-static struct irq_chip dp264_irq_type = {
-	.name			= "DP264",
-	.irq_unmask		= dp264_enable_irq,
-	.irq_mask		= dp264_disable_irq,
-	.irq_mask_ack		= dp264_disable_irq,
-	.irq_set_affinity	= dp264_set_affinity,
-};
-
-static struct irq_chip clipper_irq_type = {
-	.name			= "CLIPPER",
-	.irq_unmask		= clipper_enable_irq,
-	.irq_mask		= clipper_disable_irq,
-	.irq_mask_ack		= clipper_disable_irq,
-	.irq_set_affinity	= clipper_set_affinity,
-};
-
-static void
-dp264_device_interrupt(unsigned long vector)
-{
-#if 1
-	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
-#else
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary register of TSUNAMI */
-	pld = TSUNAMI_cchip->dir0.csr;
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1; /* clear least bit set */
-		if (i == 55)
-			isa_device_interrupt(vector);
-		else
-			handle_irq(16 + i);
-#if 0
-		TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
-		tmp = TSUNAMI_cchip->dir0.csr;
-#endif
-	}
-#endif
-}
-
-static void 
-dp264_srm_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-
-	/*
-	 * The SRM console reports PCI interrupts with a vector calculated by:
-	 *
-	 *	0x900 + (0x10 * DRIR-bit)
-	 *
-	 * So bit 16 shows up as IRQ 32, etc.
-	 * 
-	 * On DP264/BRICK/MONET, we adjust it down by 16 because at least
-	 * that many of the low order bits of the DRIR are not used, and
-	 * so we don't count them.
-	 */
-	if (irq >= 32)
-		irq -= 16;
-
-	handle_irq(irq);
-}
-
-static void 
-clipper_srm_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-
-/*
-	 * The SRM console reports PCI interrupts with a vector calculated by:
-	 *
-	 *	0x900 + (0x10 * DRIR-bit)
-	 *
-	 * So bit 16 shows up as IRQ 32, etc.
-	 * 
-	 * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
-	 * to scale down the vector reported, we just use it.
-	 *
-	 * Eg IRQ 24 is DRIR bit 8, etc, etc
-	 */
-	handle_irq(irq);
-}
-
-static void __init
-init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
-{
-	long i;
-	for (i = imin; i <= imax; ++i) {
-		irq_set_chip_and_handler(i, ops, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-}
-
-static void __init
-dp264_init_irq(void)
-{
-	outb(0, DMA1_RESET_REG);
-	outb(0, DMA2_RESET_REG);
-	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
-	outb(0, DMA2_MASK_REG);
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = dp264_srm_device_interrupt;
-
-	tsunami_update_irq_hw(0);
-
-	init_i8259a_irqs();
-	init_tsunami_irqs(&dp264_irq_type, 16, 47);
-}
-
-static void __init
-clipper_init_irq(void)
-{
-	outb(0, DMA1_RESET_REG);
-	outb(0, DMA2_RESET_REG);
-	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
-	outb(0, DMA2_MASK_REG);
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = clipper_srm_device_interrupt;
-
-	tsunami_update_irq_hw(0);
-
-	init_i8259a_irqs();
-	init_tsunami_irqs(&clipper_irq_type, 24, 63);
-}
-
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ TSUNAMI_CSR_DIM0:
- * Bit      Meaning
- * 0-17     Unused
- *18        Interrupt SCSI B (Adaptec 7895 builtin)
- *19        Interrupt SCSI A (Adaptec 7895 builtin)
- *20        Interrupt Line D from slot 2 PCI0
- *21        Interrupt Line C from slot 2 PCI0
- *22        Interrupt Line B from slot 2 PCI0
- *23        Interrupt Line A from slot 2 PCI0
- *24        Interrupt Line D from slot 1 PCI0
- *25        Interrupt Line C from slot 1 PCI0
- *26        Interrupt Line B from slot 1 PCI0
- *27        Interrupt Line A from slot 1 PCI0
- *28        Interrupt Line D from slot 0 PCI0
- *29        Interrupt Line C from slot 0 PCI0
- *30        Interrupt Line B from slot 0 PCI0
- *31        Interrupt Line A from slot 0 PCI0
- *
- *32        Interrupt Line D from slot 3 PCI1
- *33        Interrupt Line C from slot 3 PCI1
- *34        Interrupt Line B from slot 3 PCI1
- *35        Interrupt Line A from slot 3 PCI1
- *36        Interrupt Line D from slot 2 PCI1
- *37        Interrupt Line C from slot 2 PCI1
- *38        Interrupt Line B from slot 2 PCI1
- *39        Interrupt Line A from slot 2 PCI1
- *40        Interrupt Line D from slot 1 PCI1
- *41        Interrupt Line C from slot 1 PCI1
- *42        Interrupt Line B from slot 1 PCI1
- *43        Interrupt Line A from slot 1 PCI1
- *44        Interrupt Line D from slot 0 PCI1
- *45        Interrupt Line C from slot 0 PCI1
- *46        Interrupt Line B from slot 0 PCI1
- *47        Interrupt Line A from slot 0 PCI1
- *48-52     Unused
- *53        PCI0 NMI (from Cypress)
- *54        PCI0 SMI INT (from Cypress)
- *55        PCI0 ISA Interrupt (from Cypress)
- *56-60     Unused
- *61        PCI1 Bus Error
- *62        PCI0 Bus Error
- *63        Reserved
- *
- * IdSel	
- *   5	 Cypress Bridge I/O
- *   6	 SCSI Adaptec builtin
- *   7	 64 bit PCI option slot 0 (all busses)
- *   8	 64 bit PCI option slot 1 (all busses)
- *   9	 64 bit PCI option slot 2 (all busses)
- *  10	 64 bit PCI option slot 3 (not bus 0)
- */
-
-static int __init
-isa_irq_fixup(const struct pci_dev *dev, int irq)
-{
-	u8 irq8;
-
-	if (irq > 0)
-		return irq;
-
-	/* This interrupt is routed via ISA bridge, so we'll
-	   just have to trust whatever value the console might
-	   have assigned.  */
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
-
-	return irq8 & 0xf;
-}
-
-static int __init
-dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[6][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 ISA Bridge */
-		{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
-		{ 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
-		{ 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
-		{ 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
-		{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0}  /* IdSel 10 slot 3 */
-	};
-	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
-	struct pci_controller *hose = dev->sysdata;
-	int irq = COMMON_TABLE_LOOKUP;
-
-	if (irq > 0)
-		irq += 16 * hose->index;
-
-	return isa_irq_fixup(dev, irq);
-}
-
-static int __init
-monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[13][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{    45,    45,    45,    45,    45}, /* IdSel 3 21143 PCI1 */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 4 unused */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 unused */
-		{    47,    47,    47,    47,    47}, /* IdSel 6 SCSI PCI1 */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 P2P PCI1 */
-#if 1
-		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
-		{    24,    24,    25,    26,    27}, /* IdSel 15 slot 5 PCI2*/
-#else
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 9 unused */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
-#endif
-		{    40,    40,    41,    42,    43}, /* IdSel 11 slot 1 PCI0*/
-		{    36,    36,    37,    38,    39}, /* IdSel 12 slot 2 PCI0*/
-		{    32,    32,    33,    34,    35}, /* IdSel 13 slot 3 PCI0*/
-		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
-		{    24,    24,    25,    26,    27}  /* IdSel 15 slot 5 PCI2*/
-	};
-	const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
-
-	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
-}
-
-static u8 __init
-monet_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	struct pci_controller *hose = dev->sysdata;
-	int slot, pin = *pinp;
-
-	if (!dev->bus->parent) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge on hose 1. */
-	else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
-		slot = PCI_SLOT(dev->devfn);
-	} else {
-		/* Must be a card-based bridge.  */
-		do {
-			/* Check for built-in bridge on hose 1. */
-			if (hose->index == 1 &&
-			    PCI_SLOT(dev->bus->self->devfn) == 8) {
-				slot = PCI_SLOT(dev->devfn);
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-static int __init
-webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[13][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 unused */
-		{    29,    29,    29,    29,    29}, /* IdSel 9 21143 #1 */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
-		{    30,    30,    30,    30,    30}, /* IdSel 11 21143 #2 */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 12 unused */
-		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 13 unused */
-		{    35,    35,    34,    33,    32}, /* IdSel 14 slot 0 */
-		{    39,    39,    38,    37,    36}, /* IdSel 15 slot 1 */
-		{    43,    43,    42,    41,    40}, /* IdSel 16 slot 2 */
-		{    47,    47,    46,    45,    44}, /* IdSel 17 slot 3 */
-	};
-	const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
-
-	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
-}
-
-static int __init
-clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[7][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
-		{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
-		{ 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
-		{ 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
-		{ 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
-		{ 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
-		{    -1,    -1,    -1,    -1,    -1}  /* IdSel 7 ISA Bridge */
-	};
-	const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
-	struct pci_controller *hose = dev->sysdata;
-	int irq = COMMON_TABLE_LOOKUP;
-
-	if (irq > 0)
-		irq += 16 * hose->index;
-
-	return isa_irq_fixup(dev, irq);
-}
-
-static void __init
-dp264_init_pci(void)
-{
-	common_init_pci();
-	SMC669_Init(0);
-	locate_and_init_vga(NULL);
-}
-
-static void __init
-monet_init_pci(void)
-{
-	common_init_pci();
-	SMC669_Init(1);
-	es1888_init();
-	locate_and_init_vga(NULL);
-}
-
-static void __init
-clipper_init_pci(void)
-{
-	common_init_pci();
-	locate_and_init_vga(NULL);
-}
-
-static void __init
-webbrick_init_arch(void)
-{
-	tsunami_init_arch();
-
-	/* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
-	hose_head->sg_isa->align_entry = 4;
-	hose_head->sg_pci->align_entry = 4;
-}
-
-
-/*
- * The System Vectors
- */
-
-struct alpha_machine_vector dp264_mv __initmv = {
-	.vector_name		= "DP264",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TSUNAMI_IO,
-	.machine_check		= tsunami_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= dp264_device_interrupt,
-
-	.init_arch		= tsunami_init_arch,
-	.init_irq		= dp264_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= dp264_init_pci,
-	.kill_arch		= tsunami_kill_arch,
-	.pci_map_irq		= dp264_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(dp264)
-
-struct alpha_machine_vector monet_mv __initmv = {
-	.vector_name		= "Monet",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TSUNAMI_IO,
-	.machine_check		= tsunami_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= dp264_device_interrupt,
-
-	.init_arch		= tsunami_init_arch,
-	.init_irq		= dp264_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= monet_init_pci,
-	.kill_arch		= tsunami_kill_arch,
-	.pci_map_irq		= monet_map_irq,
-	.pci_swizzle		= monet_swizzle,
-};
-
-struct alpha_machine_vector webbrick_mv __initmv = {
-	.vector_name		= "Webbrick",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TSUNAMI_IO,
-	.machine_check		= tsunami_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= dp264_device_interrupt,
-
-	.init_arch		= webbrick_init_arch,
-	.init_irq		= dp264_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= tsunami_kill_arch,
-	.pci_map_irq		= webbrick_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-
-struct alpha_machine_vector clipper_mv __initmv = {
-	.vector_name		= "Clipper",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TSUNAMI_IO,
-	.machine_check		= tsunami_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= dp264_device_interrupt,
-
-	.init_arch		= tsunami_init_arch,
-	.init_irq		= clipper_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= clipper_init_pci,
-	.kill_arch		= tsunami_kill_arch,
-	.pci_map_irq		= clipper_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-
-/* Sharks strongly resemble Clipper, at least as far
- * as interrupt routing, etc, so we're using the
- * same functions as Clipper does
- */
-
-struct alpha_machine_vector shark_mv __initmv = {
-	.vector_name		= "Shark",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TSUNAMI_IO,
-	.machine_check		= tsunami_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= dp264_device_interrupt,
-
-	.init_arch		= tsunami_init_arch,
-	.init_irq		= clipper_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= tsunami_kill_arch,
-	.pci_map_irq		= clipper_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-
-/* No alpha_mv alias for webbrick/monet/clipper, since we compile them
-   in unconditionally with DP264; setup_arch knows how to cope.  */
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_eb64p.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_eb64p.c
deleted file mode 100644
index ad40a425..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_eb64p.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_eb64p.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
-	.name		= "EB64P",
-	.irq_unmask	= eb64p_enable_irq,
-	.irq_mask	= eb64p_disable_irq,
-	.irq_mask_ack	= eb64p_disable_irq,
-};
-
-static void 
-eb64p_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = inb(0x26) | (inb(0x27) << 8);
-
-	/*
-	 * Now, for every possible bit set, work through
-	 * them and call the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1;	/* clear least bit set */
-
-		if (i == 5) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-eb64p_init_irq(void)
-{
-	long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-	/*
-	 * CABRIO SRM may not set variation correctly, so here we test
-	 * the high word of the interrupt summary register for the RAZ
-	 * bits, and hope that a true EB64+ would read all ones...
-	 */
-	if (inw(0x806) != 0xffff) {
-		extern struct alpha_machine_vector cabriolet_mv;
-
-		printk("Detected Cabriolet: correcting HWRPB.\n");
-
-		hwrpb->sys_variation |= 2L << 10;
-		hwrpb_update_checksum(hwrpb);
-
-		alpha_mv = cabriolet_mv;
-		alpha_mv.init_irq();
-		return;
-	}
-#endif /* GENERIC */
-
-	outb(0xff, 0x26);
-	outb(0xff, 0x27);
-
-	init_i8259a_irqs();
-
-	for (i = 16; i < 32; ++i) {
-		irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-	setup_irq(16+5, &isa_cascade_irqaction);
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 0
- * 1        Interrupt Line A from slot 1
- * 2        Interrupt Line B from slot 0
- * 3        Interrupt Line B from slot 1
- * 4        Interrupt Line C from slot 0
- * 5        Interrupt line from the two ISA PICs
- * 6        Tulip
- * 7        NCR SCSI
- *
- * Summary @ 0x27
- * Bit      Meaning
- * 0        Interrupt Line C from slot 1
- * 1        Interrupt Line D from slot 0
- * 2        Interrupt Line D from slot 1
- * 3        RAZ
- * 4        RAZ
- * 5        RAZ
- * 6        RAZ
- * 7        RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  5       NCR SCSI controller
- *  6       PCI on board slot 0
- *  7       PCI on board slot 1
- *  8       Intel SIO PCI-ISA bridge chip
- *  9       Tulip - DECchip 21040 Ethernet controller
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int __init
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] __initdata = {
-		/*INT  INTA  INTB  INTC   INTD */
-		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
-		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */
-		{16+1, 16+1, 16+3, 16+8, 16+10},  /* IdSel 7,  slot ?, ?? */
-		{  -1,   -1,   -1,   -1,    -1},  /* IdSel 8,  SIO */
-		{16+6, 16+6, 16+6, 16+6,  16+6},  /* IdSel 9,  TULIP */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
-	.vector_name		= "EB64+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
-	.vector_name		= "EB66",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_eiger.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_eiger.c
deleted file mode 100644
index 79d69d7f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_eiger.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_eiger.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996, 1999 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *	Copyright (C) 1999 Iain Grant
- *
- * Code supporting the EIGER (EV6+TSUNAMI).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/pgtable.h>
-#include <asm/core_tsunami.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note that this interrupt code is identical to TAKARA.  */
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned long cached_irq_mask[2] = { -1, -1 };
-
-static inline void
-eiger_update_irq_hw(unsigned long irq, unsigned long mask)
-{
-	int regaddr;
-
-	mask = (irq >= 64 ? mask << 16 : mask >> ((irq - 16) & 0x30));
-	regaddr = 0x510 + (((irq - 16) >> 2) & 0x0c);
-	outl(mask & 0xffff0000UL, regaddr);
-}
-
-static inline void
-eiger_enable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	unsigned long mask;
-	mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
-	eiger_update_irq_hw(irq, mask);
-}
-
-static void
-eiger_disable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	unsigned long mask;
-	mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
-	eiger_update_irq_hw(irq, mask);
-}
-
-static struct irq_chip eiger_irq_type = {
-	.name		= "EIGER",
-	.irq_unmask	= eiger_enable_irq,
-	.irq_mask	= eiger_disable_irq,
-	.irq_mask_ack	= eiger_disable_irq,
-};
-
-static void
-eiger_device_interrupt(unsigned long vector)
-{
-	unsigned intstatus;
-
-	/*
-	 * The PALcode will have passed us vectors 0x800 or 0x810,
-	 * which are fairly arbitrary values and serve only to tell
-	 * us whether an interrupt has come in on IRQ0 or IRQ1. If
-	 * it's IRQ1 it's a PCI interrupt; if it's IRQ0, it's
-	 * probably ISA, but PCI interrupts can come through IRQ0
-	 * as well if the interrupt controller isn't in accelerated
-	 * mode.
-	 *
-	 * OTOH, the accelerator thing doesn't seem to be working
-	 * overly well, so what we'll do instead is try directly
-	 * examining the Master Interrupt Register to see if it's a
-	 * PCI interrupt, and if _not_ then we'll pass it on to the
-	 * ISA handler.
-	 */
-
-	intstatus = inw(0x500) & 15;
-	if (intstatus) {
-		/*
-		 * This is a PCI interrupt. Check each bit and
-		 * despatch an interrupt if it's set.
-		 */
-
-		if (intstatus & 8) handle_irq(16+3);
-		if (intstatus & 4) handle_irq(16+2);
-		if (intstatus & 2) handle_irq(16+1);
-		if (intstatus & 1) handle_irq(16+0);
-	} else {
-		isa_device_interrupt(vector);
-	}
-}
-
-static void
-eiger_srm_device_interrupt(unsigned long vector)
-{
-	int irq = (vector - 0x800) >> 4;
-	handle_irq(irq);
-}
-
-static void __init
-eiger_init_irq(void)
-{
-	long i;
-
-	outb(0, DMA1_RESET_REG);
-	outb(0, DMA2_RESET_REG);
-	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
-	outb(0, DMA2_MASK_REG);
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = eiger_srm_device_interrupt;
-
-	for (i = 16; i < 128; i += 16)
-		eiger_update_irq_hw(i, -1);
-
-	init_i8259a_irqs();
-
-	for (i = 16; i < 128; ++i) {
-		irq_set_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-}
-
-static int __init
-eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	u8 irq_orig;
-
-	/* The SRM console has already calculated out the IRQ value's for
-	   option cards. As this works lets just read in the value already
-	   set and change it to a useable value by Linux.
-
-	   All the IRQ values generated by the console are greater than 90,
-	   so we subtract 80 because it is (90 - allocated ISA IRQ's).  */
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq_orig);
-
-	return irq_orig - 0x80;
-}
-
-static u8 __init
-eiger_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	struct pci_controller *hose = dev->sysdata;
-	int slot, pin = *pinp;
-	int bridge_count = 0;
-
-	/* Find the number of backplane bridges.  */
-	int backplane = inw(0x502) & 0x0f;
-
-	switch (backplane)
-	{
-	   case 0x00: bridge_count = 0; break; /* No bridges */
-	   case 0x01: bridge_count = 1; break; /* 1 */
-	   case 0x03: bridge_count = 2; break; /* 2 */
-	   case 0x07: bridge_count = 3; break; /* 3 */
-	   case 0x0f: bridge_count = 4; break; /* 4 */
-	};
-
-	slot = PCI_SLOT(dev->devfn);
-	while (dev->bus->self) {
-		/* Check for built-in bridges on hose 0. */
-		if (hose->index == 0
-		    && (PCI_SLOT(dev->bus->self->devfn)
-			> 20 - bridge_count)) {
-			slot = PCI_SLOT(dev->devfn);
-			break;
-		}
-		/* Must be a card-based bridge.  */
-		pin = pci_swizzle_interrupt_pin(dev, pin);
-
-		/* Move up the chain of bridges.  */
-		dev = dev->bus->self;
-	}
-	*pinp = pin;
-	return slot;
-}
-
-/*
- * The System Vectors
- */
-
-struct alpha_machine_vector eiger_mv __initmv = {
-	.vector_name		= "Eiger",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TSUNAMI_IO,
-	.machine_check		= tsunami_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
-
-	.nr_irqs		= 128,
-	.device_interrupt	= eiger_device_interrupt,
-
-	.init_arch		= tsunami_init_arch,
-	.init_irq		= eiger_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= tsunami_kill_arch,
-	.pci_map_irq		= eiger_map_irq,
-	.pci_swizzle		= eiger_swizzle,
-};
-ALIAS_MV(eiger)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_jensen.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_jensen.c
deleted file mode 100644
index 5a0af11b..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_jensen.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_jensen.c
- *
- *	Copyright (C) 1995 Linus Torvalds
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Jensen.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
- * 0x9X0 for the local motherboard interrupts.
- *
- * Note especially that those local interrupts CANNOT be masked,
- * which causes much of the pain below...
- *
- *	0x660 - NMI
- *
- *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
- *	0x810 - IRQ1  line printer (duh..)
- *	0x860 - IRQ6  floppy disk
- *
- *	0x900 - COM1
- *	0x920 - COM2
- *	0x980 - keyboard
- *	0x990 - mouse
- *
- * PCI-based systems are more sane: they don't have the local
- * interrupts at all, and have only normal PCI interrupts from
- * devices.  Happily it's easy enough to do a sane mapping from the
- * Jensen.
- * 
- * Note that this means that we may have to do a hardware
- * "local_op" to a different interrupt than we report to the rest of the
- * world.
- */
-
-static void
-jensen_local_enable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_enable_irq(d);
-}
-
-static void
-jensen_local_disable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_disable_irq(d);
-}
-
-static void
-jensen_local_mask_ack(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_mask_and_ack_irq(d);
-}
-
-static struct irq_chip jensen_local_irq_type = {
-	.name		= "LOCAL",
-	.irq_unmask	= jensen_local_enable,
-	.irq_mask	= jensen_local_disable,
-	.irq_mask_ack	= jensen_local_mask_ack,
-};
-
-static void 
-jensen_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	switch (vector) {
-	case 0x660:
-		printk("Whee.. NMI received. Probable hardware error\n");
-		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
-		return;
-
-	/* local device interrupts: */
-	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
-	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
-	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
-	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
-
-	default:
-		if (vector > 0x900) {
-			printk("Unknown local interrupt %lx\n", vector);
-			return;
-		}
-
-		irq = (vector - 0x800) >> 4;
-		if (irq == 1)
-			irq = 7;
-		break;
-	}
-
-	/* If there is no handler yet... */
-	if (!irq_has_action(irq)) {
-	    /* If it is a local interrupt that cannot be masked... */
-	    if (vector >= 0x900)
-	    {
-	        /* Clear keyboard/mouse state */
-	    	inb(0x64);
-		inb(0x60);
-		/* Reset serial ports */
-		inb(0x3fa);
-		inb(0x2fa);
-		outb(0x0c, 0x3fc);
-		outb(0x0c, 0x2fc);
-		/* Clear NMI */
-		outb(0,0x61);
-		outb(0,0x461);
-	    }
-	}
-
-#if 0
-        /* A useful bit of code to find out if an interrupt is going wild.  */
-        {
-          static unsigned int last_msg = 0, last_cc = 0;
-          static int last_irq = -1, count = 0;
-          unsigned int cc;
-
-          __asm __volatile("rpcc %0" : "=r"(cc));
-          ++count;
-#define JENSEN_CYCLES_PER_SEC	(150000000)
-          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
-	      irq != last_irq) {
-                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
-                       irq, count, cc-last_cc, get_irq_regs()->pc);
-                count = 0;
-                last_msg = cc;
-                last_irq = irq;
-          }
-          last_cc = cc;
-        }
-#endif
-
-	handle_irq(irq);
-}
-
-static void __init
-jensen_init_irq(void)
-{
-	init_i8259a_irqs();
-
-	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
-
-	common_init_isa_dma();
-}
-
-static void __init
-jensen_init_arch(void)
-{
-	struct pci_controller *hose;
-#ifdef CONFIG_PCI
-	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
-
-	isa_bridge = &fake_isa_bridge;
-#endif
-
-	/* Create a hose so that we can report i/o base addresses to
-	   userland.  */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
-	hose->dense_mem_base = 0;
-	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-	__direct_map_base = 0;
-	__direct_map_size = 0xffffffff;
-}
-
-static void
-jensen_machine_check(unsigned long vector, unsigned long la)
-{
-	printk(KERN_CRIT "Machine check\n");
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector jensen_mv __initmv = {
-	.vector_name		= "Jensen",
-	DO_EV4_MMU,
-	IO_LITE(JENSEN,jensen),
-	.machine_check		= jensen_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.rtc_port		= 0x170,
-	.rtc_get_time		= common_get_rtc_time,
-	.rtc_set_time		= common_set_rtc_time,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= jensen_device_interrupt,
-
-	.init_arch		= jensen_init_arch,
-	.init_irq		= jensen_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= NULL,
-	.kill_arch		= NULL,
-};
-ALIAS_MV(jensen)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_marvel.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_marvel.c
deleted file mode 100644
index 407accc8..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_marvel.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/*
- * linux/arch/alpha/kernel/sys_marvel.c
- *
- * Marvel / IO7 support
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_marvel.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-#include <asm/vga.h>
-#include <asm/rtc.h>
-
-#include "proto.h"
-#include "err_impl.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-#if NR_IRQS < MARVEL_NR_IRQS
-# error NR_IRQS < MARVEL_NR_IRQS !!!
-#endif
-
-
-/*
- * Interrupt handling.
- */
-static void 
-io7_device_interrupt(unsigned long vector)
-{
-	unsigned int pid;
-	unsigned int irq;
-
-	/*
-	 * Vector is 0x800 + (interrupt)
-	 *
-	 * where (interrupt) is:
-	 *
-	 *	...16|15 14|13     4|3 0
-	 *	-----+-----+--------+---
-	 *	  PE |  0  |   irq  | 0
-	 *
-	 * where (irq) is 
-	 *
-	 *       0x0800 - 0x0ff0	 - 0x0800 + (LSI id << 4)
-	 *	 0x1000 - 0x2ff0	 - 0x1000 + (MSI_DAT<8:0> << 4)
-	 */
-	pid = vector >> 16;
-	irq = ((vector & 0xffff) - 0x800) >> 4;
-
-	irq += 16;				/* offset for legacy */
-	irq &= MARVEL_IRQ_VEC_IRQ_MASK;		/* not too many bits */
-	irq |= pid << MARVEL_IRQ_VEC_PE_SHIFT;	/* merge the pid     */
-
-	handle_irq(irq);
-}
-
-static volatile unsigned long *
-io7_get_irq_ctl(unsigned int irq, struct io7 **pio7)
-{
-	volatile unsigned long *ctl;
-	unsigned int pid;
-	struct io7 *io7;
-
-	pid = irq >> MARVEL_IRQ_VEC_PE_SHIFT;
-
-	if (!(io7 = marvel_find_io7(pid))) {
-		printk(KERN_ERR 
-		       "%s for nonexistent io7 -- vec %x, pid %d\n",
-		       __func__, irq, pid);
-		return NULL;
-	}
-
-	irq &= MARVEL_IRQ_VEC_IRQ_MASK;	/* isolate the vector    */
-	irq -= 16;			/* subtract legacy bias  */
-
-	if (irq >= 0x180) {
-		printk(KERN_ERR 
-		       "%s for invalid irq -- pid %d adjusted irq %x\n",
-		       __func__, pid, irq);
-		return NULL;
-	}
-
-	ctl = &io7->csrs->PO7_LSI_CTL[irq & 0xff].csr; /* assume LSI */
-	if (irq >= 0x80)	     	/* MSI */
-		ctl = &io7->csrs->PO7_MSI_CTL[((irq - 0x80) >> 5) & 0x0f].csr;
-
-	if (pio7) *pio7 = io7;
-	return ctl;
-}
-
-static void
-io7_enable_irq(struct irq_data *d)
-{
-	volatile unsigned long *ctl;
-	unsigned int irq = d->irq;
-	struct io7 *io7;
-
-	ctl = io7_get_irq_ctl(irq, &io7);
-	if (!ctl || !io7) {
-		printk(KERN_ERR "%s: get_ctl failed for irq %x\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock(&io7->irq_lock);
-	*ctl |= 1UL << 24;
-	mb();
-	*ctl;
-	spin_unlock(&io7->irq_lock);
-}
-
-static void
-io7_disable_irq(struct irq_data *d)
-{
-	volatile unsigned long *ctl;
-	unsigned int irq = d->irq;
-	struct io7 *io7;
-
-	ctl = io7_get_irq_ctl(irq, &io7);
-	if (!ctl || !io7) {
-		printk(KERN_ERR "%s: get_ctl failed for irq %x\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock(&io7->irq_lock);
-	*ctl &= ~(1UL << 24);
-	mb();
-	*ctl;
-	spin_unlock(&io7->irq_lock);
-}
-
-static void
-marvel_irq_noop(struct irq_data *d)
-{
-	return;
-}
-
-static struct irq_chip marvel_legacy_irq_type = {
-	.name		= "LEGACY",
-	.irq_mask	= marvel_irq_noop,
-	.irq_unmask	= marvel_irq_noop,
-};
-
-static struct irq_chip io7_lsi_irq_type = {
-	.name		= "LSI",
-	.irq_unmask	= io7_enable_irq,
-	.irq_mask	= io7_disable_irq,
-	.irq_mask_ack	= io7_disable_irq,
-};
-
-static struct irq_chip io7_msi_irq_type = {
-	.name		= "MSI",
-	.irq_unmask	= io7_enable_irq,
-	.irq_mask	= io7_disable_irq,
-	.irq_ack	= marvel_irq_noop,
-};
-
-static void
-io7_redirect_irq(struct io7 *io7, 
-		 volatile unsigned long *csr, 
-		 unsigned int where)
-{
-	unsigned long val;
-	
-	val = *csr;
-	val &= ~(0x1ffUL << 24);		/* clear the target pid   */
-	val |= ((unsigned long)where << 24);	/* set the new target pid */
-	
-	*csr = val;
-	mb();
-	*csr;
-}
-
-static void 
-io7_redirect_one_lsi(struct io7 *io7, unsigned int which, unsigned int where)
-{
-	unsigned long val;
-
-	/*
-	 * LSI_CTL has target PID @ 14
-	 */
-	val = io7->csrs->PO7_LSI_CTL[which].csr;
-	val &= ~(0x1ffUL << 14);		/* clear the target pid */
-	val |= ((unsigned long)where << 14);	/* set the new target pid */
-
-	io7->csrs->PO7_LSI_CTL[which].csr = val;
-	mb();
-	io7->csrs->PO7_LSI_CTL[which].csr;
-}
-
-static void 
-io7_redirect_one_msi(struct io7 *io7, unsigned int which, unsigned int where)
-{
-	unsigned long val;
-
-	/*
-	 * MSI_CTL has target PID @ 14
-	 */
-	val = io7->csrs->PO7_MSI_CTL[which].csr;
-	val &= ~(0x1ffUL << 14);		/* clear the target pid */
-	val |= ((unsigned long)where << 14);	/* set the new target pid */
-
-	io7->csrs->PO7_MSI_CTL[which].csr = val;
-	mb();
-	io7->csrs->PO7_MSI_CTL[which].csr;
-}
-
-static void __init
-init_one_io7_lsi(struct io7 *io7, unsigned int which, unsigned int where)
-{
-	/*
-	 * LSI_CTL has target PID @ 14
-	 */
-	io7->csrs->PO7_LSI_CTL[which].csr = ((unsigned long)where << 14);
-	mb();
-	io7->csrs->PO7_LSI_CTL[which].csr;
-}
-
-static void __init
-init_one_io7_msi(struct io7 *io7, unsigned int which, unsigned int where)
-{
-	/*
-	 * MSI_CTL has target PID @ 14
-	 */
-	io7->csrs->PO7_MSI_CTL[which].csr = ((unsigned long)where << 14);
-	mb();
-	io7->csrs->PO7_MSI_CTL[which].csr;
-}
-
-static void __init
-init_io7_irqs(struct io7 *io7, 
-	      struct irq_chip *lsi_ops,
-	      struct irq_chip *msi_ops)
-{
-	long base = (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT) + 16;
-	long i;
-
-	printk("Initializing interrupts for IO7 at PE %u - base %lx\n",
-		io7->pe, base);
-
-	/*
-	 * Where should interrupts from this IO7 go?
-	 *
-	 * They really should be sent to the local CPU to avoid having to
-	 * traverse the mesh, but if it's not an SMP kernel, they have to
-	 * go to the boot CPU. Send them all to the boot CPU for now,
-	 * as each secondary starts, it can redirect it's local device 
-	 * interrupts.
-	 */
-	printk("  Interrupts reported to CPU at PE %u\n", boot_cpuid);
-
-	spin_lock(&io7->irq_lock);
-
-	/* set up the error irqs */
-	io7_redirect_irq(io7, &io7->csrs->HLT_CTL.csr, boot_cpuid);
-	io7_redirect_irq(io7, &io7->csrs->HPI_CTL.csr, boot_cpuid);
-	io7_redirect_irq(io7, &io7->csrs->CRD_CTL.csr, boot_cpuid);
-	io7_redirect_irq(io7, &io7->csrs->STV_CTL.csr, boot_cpuid);
-	io7_redirect_irq(io7, &io7->csrs->HEI_CTL.csr, boot_cpuid);
-
-	/* Set up the lsi irqs.  */
-	for (i = 0; i < 128; ++i) {
-		irq_set_chip_and_handler(base + i, lsi_ops, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	/* Disable the implemented irqs in hardware.  */
-	for (i = 0; i < 0x60; ++i) 
-		init_one_io7_lsi(io7, i, boot_cpuid);
-
-	init_one_io7_lsi(io7, 0x74, boot_cpuid);
-	init_one_io7_lsi(io7, 0x75, boot_cpuid);
-
-
-	/* Set up the msi irqs.  */
-	for (i = 128; i < (128 + 512); ++i) {
-		irq_set_chip_and_handler(base + i, msi_ops, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	for (i = 0; i < 16; ++i)
-		init_one_io7_msi(io7, i, boot_cpuid);
-
-	spin_unlock(&io7->irq_lock);
-}
-
-static void __init
-marvel_init_irq(void)
-{
-	int i;
-	struct io7 *io7 = NULL;
-
-	/* Reserve the legacy irqs.  */
-	for (i = 0; i < 16; ++i) {
-		irq_set_chip_and_handler(i, &marvel_legacy_irq_type,
-					 handle_level_irq);
-	}
-
-	/* Init the io7 irqs.  */
-	for (io7 = NULL; (io7 = marvel_next_io7(io7)) != NULL; )
-		init_io7_irqs(io7, &io7_lsi_irq_type, &io7_msi_irq_type);
-}
-
-static int 
-marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct pci_controller *hose = dev->sysdata;
-	struct io7_port *io7_port = hose->sysdata;
-	struct io7 *io7 = io7_port->io7;
-	int msi_loc, msi_data_off;
-	u16 msg_ctl;
-	u16 msg_dat;
-	u8 intline; 
-	int irq;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
-	irq = intline;
-
-	msi_loc = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	msg_ctl = 0;
-	if (msi_loc) 
-		pci_read_config_word(dev, msi_loc + PCI_MSI_FLAGS, &msg_ctl);
-
-	if (msg_ctl & PCI_MSI_FLAGS_ENABLE) {
- 		msi_data_off = PCI_MSI_DATA_32;
-		if (msg_ctl & PCI_MSI_FLAGS_64BIT) 
-			msi_data_off = PCI_MSI_DATA_64;
-		pci_read_config_word(dev, msi_loc + msi_data_off, &msg_dat);
-
-		irq = msg_dat & 0x1ff;		/* we use msg_data<8:0> */
-		irq += 0x80;			/* offset for lsi       */
-
-#if 1
-		printk("PCI:%d:%d:%d (hose %d) is using MSI\n",
-		       dev->bus->number, 
-		       PCI_SLOT(dev->devfn), 
-		       PCI_FUNC(dev->devfn),
-		       hose->index);
-		printk("  %d message(s) from 0x%04x\n", 
-		       1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4),
-		       msg_dat);
-		printk("  reporting on %d IRQ(s) from %d (0x%x)\n", 
-		       1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4),
-		       (irq + 16) | (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT),
-		       (irq + 16) | (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT));
-#endif
-
-#if 0
-		pci_write_config_word(dev, msi_loc + PCI_MSI_FLAGS,
-				      msg_ctl & ~PCI_MSI_FLAGS_ENABLE);
-		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
-		irq = intline;
-
-		printk("  forcing LSI interrupt on irq %d [0x%x]\n", irq, irq);
-#endif
-	}
-
-	irq += 16;					/* offset for legacy */
-	irq |= io7->pe << MARVEL_IRQ_VEC_PE_SHIFT;	/* merge the pid     */
-
-	return irq; 
-}
-
-static void __init
-marvel_init_pci(void)
-{
-	struct io7 *io7;
-
-	marvel_register_error_handlers();
-
-	/* Indicate that we trust the console to configure things properly */
-	pci_set_flags(PCI_PROBE_ONLY);
-	common_init_pci();
-	locate_and_init_vga(NULL);
-
-	/* Clear any io7 errors.  */
-	for (io7 = NULL; (io7 = marvel_next_io7(io7)) != NULL; ) 
-		io7_clear_errors(io7);
-}
-
-static void __init
-marvel_init_rtc(void)
-{
-	init_rtc_irq();
-}
-
-struct marvel_rtc_time {
-	struct rtc_time *time;
-	int retval;
-};
-
-#ifdef CONFIG_SMP
-static void
-smp_get_rtc_time(void *data)
-{
-	struct marvel_rtc_time *mrt = data;
-	mrt->retval = __get_rtc_time(mrt->time);
-}
-
-static void
-smp_set_rtc_time(void *data)
-{
-	struct marvel_rtc_time *mrt = data;
-	mrt->retval = __set_rtc_time(mrt->time);
-}
-#endif
-
-static unsigned int
-marvel_get_rtc_time(struct rtc_time *time)
-{
-#ifdef CONFIG_SMP
-	struct marvel_rtc_time mrt;
-
-	if (smp_processor_id() != boot_cpuid) {
-		mrt.time = time;
-		smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
-		return mrt.retval;
-	}
-#endif
-	return __get_rtc_time(time);
-}
-
-static int
-marvel_set_rtc_time(struct rtc_time *time)
-{
-#ifdef CONFIG_SMP
-	struct marvel_rtc_time mrt;
-
-	if (smp_processor_id() != boot_cpuid) {
-		mrt.time = time;
-		smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
-		return mrt.retval;
-	}
-#endif
-	return __set_rtc_time(time);
-}
-
-static void
-marvel_smp_callin(void)
-{
-	int cpuid = hard_smp_processor_id();
-	struct io7 *io7 = marvel_find_io7(cpuid);
-	unsigned int i;
-
-	if (!io7)
-		return;
-
-	/* 
-	 * There is a local IO7 - redirect all of its interrupts here.
-	 */
-	printk("Redirecting IO7 interrupts to local CPU at PE %u\n", cpuid);
-
-	/* Redirect the error IRQS here.  */
-	io7_redirect_irq(io7, &io7->csrs->HLT_CTL.csr, cpuid);
-	io7_redirect_irq(io7, &io7->csrs->HPI_CTL.csr, cpuid);
-	io7_redirect_irq(io7, &io7->csrs->CRD_CTL.csr, cpuid);
-	io7_redirect_irq(io7, &io7->csrs->STV_CTL.csr, cpuid);
-	io7_redirect_irq(io7, &io7->csrs->HEI_CTL.csr, cpuid);
-
-	/* Redirect the implemented LSIs here.  */
-	for (i = 0; i < 0x60; ++i) 
-		io7_redirect_one_lsi(io7, i, cpuid);
-
-	io7_redirect_one_lsi(io7, 0x74, cpuid);
-	io7_redirect_one_lsi(io7, 0x75, cpuid);
-
-	/* Redirect the MSIs here.  */
-	for (i = 0; i < 16; ++i)
-		io7_redirect_one_msi(io7, i, cpuid);
-}
-
-/*
- * System Vectors
- */
-struct alpha_machine_vector marvel_ev7_mv __initmv = {
-	.vector_name		= "MARVEL/EV7",
-	DO_EV7_MMU,
-	.rtc_port		= 0x70,
-	.rtc_get_time		= marvel_get_rtc_time,
-	.rtc_set_time		= marvel_set_rtc_time,
-	DO_MARVEL_IO,
-	.machine_check		= marvel_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= IO7_DAC_OFFSET,
-
-	.nr_irqs		= MARVEL_NR_IRQS,
-	.device_interrupt	= io7_device_interrupt,
-
-	.agp_info		= marvel_agp_info,
-
-	.smp_callin		= marvel_smp_callin,
-	.init_arch		= marvel_init_arch,
-	.init_irq		= marvel_init_irq,
-	.init_rtc		= marvel_init_rtc,
-	.init_pci		= marvel_init_pci,
-	.kill_arch		= marvel_kill_arch,
-	.pci_map_irq		= marvel_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.pa_to_nid		= marvel_pa_to_nid,
-	.cpuid_to_nid		= marvel_cpuid_to_nid,
-	.node_mem_start		= marvel_node_mem_start,
-	.node_mem_size		= marvel_node_mem_size,
-};
-ALIAS_MV(marvel_ev7)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_miata.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_miata.c
deleted file mode 100644
index d5b9776a..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_miata.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_miata.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999, 2000 Richard Henderson
- *
- * Code supporting the MIATA (EV56+PYXIS).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/reboot.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_cia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-static void 
-miata_srm_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-
-	/*
-	 * I really hate to do this, but the MIATA SRM console ignores the
-	 *  low 8 bits in the interrupt summary register, and reports the
-	 *  vector 0x80 *lower* than I expected from the bit numbering in
-	 *  the documentation.
-	 * This was done because the low 8 summary bits really aren't used
-	 *  for reporting any interrupts (the PCI-ISA bridge, bit 7, isn't
-	 *  used for this purpose, as PIC interrupts are delivered as the
-	 *  vectors 0x800-0x8f0).
-	 * But I really don't want to change the fixup code for allocation
-	 *  of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
-	 *  look nice and clean now.
-	 * So, here's this grotty hack... :-(
-	 */
-	if (irq >= 16)
-		irq = irq + 8;
-
-	handle_irq(irq);
-}
-
-static void __init
-miata_init_irq(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = miata_srm_device_interrupt;
-
-#if 0
-	/* These break on MiataGL so we'll try not to do it at all.  */
-	*(vulp)PYXIS_INT_HILO = 0x000000B2UL; mb();	/* ISA/NMI HI */
-	*(vulp)PYXIS_RT_COUNT = 0UL; mb();		/* clear count */
-#endif
-
-	init_i8259a_irqs();
-
-	/* Not interested in the bogus interrupts (3,10), Fan Fault (0),
-           NMI (1), or EIDE (9).
-
-	   We also disable the risers (4,5), since we don't know how to
-	   route the interrupts behind the bridge.  */
-	init_pyxis_irqs(0x63b0000);
-
-	common_init_isa_dma();
-	setup_irq(16+2, &halt_switch_irqaction);	/* SRM only? */
-	setup_irq(16+6, &timer_cascade_irqaction);
-}
-
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ PYXIS_INT_REQ:
- * Bit      Meaning
- * 0        Fan Fault
- * 1        NMI
- * 2        Halt/Reset switch
- * 3        none
- * 4        CID0 (Riser ID)
- * 5        CID1 (Riser ID)
- * 6        Interval timer
- * 7        PCI-ISA Bridge
- * 8        Ethernet
- * 9        EIDE (deprecated, ISA 14/15 used)
- *10        none
- *11        USB
- *12        Interrupt Line A from slot 4
- *13        Interrupt Line B from slot 4
- *14        Interrupt Line C from slot 4
- *15        Interrupt Line D from slot 4
- *16        Interrupt Line A from slot 5
- *17        Interrupt line B from slot 5
- *18        Interrupt Line C from slot 5
- *19        Interrupt Line D from slot 5
- *20        Interrupt Line A from slot 1
- *21        Interrupt Line B from slot 1
- *22        Interrupt Line C from slot 1
- *23        Interrupt Line D from slot 1
- *24        Interrupt Line A from slot 2
- *25        Interrupt Line B from slot 2
- *26        Interrupt Line C from slot 2
- *27        Interrupt Line D from slot 2
- *27        Interrupt Line A from slot 3
- *29        Interrupt Line B from slot 3
- *30        Interrupt Line C from slot 3
- *31        Interrupt Line D from slot 3
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  3       DC21142 Ethernet
- *  4       EIDE CMD646
- *  5       none
- *  6       USB
- *  7       PCI-ISA bridge
- *  8       PCI-PCI Bridge      (SBU Riser)
- *  9       none
- * 10       none
- * 11       PCI on board slot 4 (SBU Riser)
- * 12       PCI on board slot 5 (SBU Riser)
- *
- *  These are behind the bridge, so I'm not sure what to do...
- *
- * 13       PCI on board slot 1 (SBU Riser)
- * 14       PCI on board slot 2 (SBU Riser)
- * 15       PCI on board slot 3 (SBU Riser)
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int __init
-miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-        static char irq_tab[18][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8},  /* IdSel 14,  DC21142 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 15,  EIDE    */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none    */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17,  none    */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCI-ISA */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PCI-PCI */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  none    */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  none    */
-		{16+12, 16+12, 16+13, 16+14, 16+15},  /* IdSel 22,  slot 4  */
-		{16+16, 16+16, 16+17, 16+18, 16+19},  /* IdSel 23,  slot 5  */
-		/* the next 7 are actually on PCI bus 1, across the bridge */
-		{16+11, 16+11, 16+11, 16+11, 16+11},  /* IdSel 24,  QLISP/GL*/
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 25,  none    */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 26,  none    */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 27,  none    */
-		{16+20, 16+20, 16+21, 16+22, 16+23},  /* IdSel 28,  slot 1  */
-		{16+24, 16+24, 16+25, 16+26, 16+27},  /* IdSel 29,  slot 2  */
-		{16+28, 16+28, 16+29, 16+30, 16+31},  /* IdSel 30,  slot 3  */
-		/* This bridge is on the main bus of the later orig MIATA */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 31,  PCI-PCI */
-        };
-	const long min_idsel = 3, max_idsel = 20, irqs_per_slot = 5;
-	
-	/* the USB function of the 82c693 has it's interrupt connected to 
-           the 2nd 8259 controller. So we have to check for it first. */
-
-	if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
-		u8 irq=0;
-		struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
-		if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
-			pci_dev_put(pdev);
-			return -1;
-		}
-		else	{
-			pci_dev_put(pdev);
-			return irq;
-		}
-	}
-
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8 __init
-miata_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}		
-	/* Check for the built-in bridge.  */
-	else if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
-		 (PCI_SLOT(dev->bus->self->devfn) == 20)) {
-		slot = PCI_SLOT(dev->devfn) + 9;
-	}
-	else 
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
-			    (PCI_SLOT(dev->bus->self->devfn) == 20)) {
-				slot = PCI_SLOT(dev->devfn) + 9;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-static void __init
-miata_init_pci(void)
-{
-	cia_init_pci();
-	SMC669_Init(0); /* it might be a GL (fails harmlessly if not) */
-	es1888_init();
-}
-
-static void
-miata_kill_arch(int mode)
-{
-	cia_kill_arch(mode);
-
-#ifndef ALPHA_RESTORE_SRM_SETUP
-	switch(mode) {
-	case LINUX_REBOOT_CMD_RESTART:
-		/* Who said DEC engineers have no sense of humor? ;-)  */ 
-		if (alpha_using_srm) {
-			*(vuip) PYXIS_RESET = 0x0000dead; 
-			mb(); 
-		}
-		break;
-	case LINUX_REBOOT_CMD_HALT:
-		break;
-	case LINUX_REBOOT_CMD_POWER_OFF:
-		break;
-	}
-
-	halt();
-#endif
-}
-
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector miata_mv __initmv = {
-	.vector_name		= "Miata",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_PYXIS_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= PYXIS_DAC_OFFSET,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= pyxis_device_interrupt,
-
-	.init_arch		= pyxis_init_arch,
-	.init_irq		= miata_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= miata_init_pci,
-	.kill_arch		= miata_kill_arch,
-	.pci_map_irq		= miata_map_irq,
-	.pci_swizzle		= miata_swizzle,
-};
-ALIAS_MV(miata)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_mikasa.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_mikasa.c
deleted file mode 100644
index 5e82dc1a..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_mikasa.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_mikasa.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the MIKASA (AlphaServer 1000).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/mce.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_cia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for ENABLED irqs.  */
-static int cached_irq_mask;
-
-static inline void
-mikasa_update_irq_hw(int mask)
-{
-	outw(mask, 0x536);
-}
-
-static inline void
-mikasa_enable_irq(struct irq_data *d)
-{
-	mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
-}
-
-static void
-mikasa_disable_irq(struct irq_data *d)
-{
-	mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
-}
-
-static struct irq_chip mikasa_irq_type = {
-	.name		= "MIKASA",
-	.irq_unmask	= mikasa_enable_irq,
-	.irq_mask	= mikasa_disable_irq,
-	.irq_mask_ack	= mikasa_disable_irq,
-};
-
-static void 
-mikasa_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = (((~inw(0x534) & 0x0000ffffUL) << 16)
-	       | (((unsigned long) inb(0xa0)) << 8)
-	       | inb(0x20));
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1; /* clear least bit set */
-		if (i < 16) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(i);
-		}
-	}
-}
-
-static void __init
-mikasa_init_irq(void)
-{
-	long i;
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	mikasa_update_irq_hw(0);
-
-	for (i = 16; i < 32; ++i) {
-		irq_set_chip_and_handler(i, &mikasa_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ 0x536:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 0
- * 1        Interrupt Line B from slot 0
- * 2        Interrupt Line C from slot 0
- * 3        Interrupt Line D from slot 0
- * 4        Interrupt Line A from slot 1
- * 5        Interrupt line B from slot 1
- * 6        Interrupt Line C from slot 1
- * 7        Interrupt Line D from slot 1
- * 8        Interrupt Line A from slot 2
- * 9        Interrupt Line B from slot 2
- *10        Interrupt Line C from slot 2
- *11        Interrupt Line D from slot 2
- *12        NCR 810 SCSI
- *13        Power Supply Fail
- *14        Temperature Warn
- *15        Reserved
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  6       NCR SCSI controller
- *  7       Intel PCI-EISA bridge chip
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int __init
-mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[8][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{16+12, 16+12, 16+12, 16+12, 16+12},	/* IdSel 17,  SCSI */
-		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 18,  PCEB */
-		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 19,  ???? */
-		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 20,  ???? */
-		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 21,  ???? */
-		{ 16+0,  16+0,  16+1,  16+2,  16+3},	/* IdSel 22,  slot 0 */
-		{ 16+4,  16+4,  16+5,  16+6,  16+7},	/* IdSel 23,  slot 1 */
-		{ 16+8,  16+8,  16+9, 16+10, 16+11},	/* IdSel 24,  slot 2 */
-	};
-	const long min_idsel = 6, max_idsel = 13, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-	struct el_common *mchk_header;
-	unsigned int code;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	code = mchk_header->code;
-	process_mcheck_info(vector, la_ptr, "MIKASA APECS",
-			    (mcheck_expected(0)
-			     && (code == MCHK_NO_DEVSEL
-			         || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
-	.vector_name		= "Mikasa",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= mikasa_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= mikasa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= mikasa_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= mikasa_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_primo_mv __initmv = {
-	.vector_name		= "Mikasa-Primo",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= mikasa_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= mikasa_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= mikasa_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(mikasa_primo)
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_nautilus.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_nautilus.c
deleted file mode 100644
index 4d4c046f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_nautilus.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_nautilus.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1998 Richard Henderson
- *	Copyright (C) 1999 Alpha Processor, Inc.,
- *		(David Daniel, Stig Telfer, Soohoon Lee)
- *
- * Code supporting NAUTILUS systems.
- *
- *
- * NAUTILUS has the following I/O features:
- *
- * a) Driven by AMD 751 aka IRONGATE (northbridge):
- *     4 PCI slots
- *     1 AGP slot
- *
- * b) Driven by ALI M1543C (southbridge)
- *     2 ISA slots
- *     2 IDE connectors
- *     1 dual drive capable FDD controller
- *     2 serial ports
- *     1 ECP/EPP/SP parallel port
- *     2 USB ports
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/reboot.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/pgtable.h>
-#include <asm/core_irongate.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "err_impl.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-static void __init
-nautilus_init_irq(void)
-{
-	if (alpha_using_srm) {
-		alpha_mv.device_interrupt = srm_device_interrupt;
-	}
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-static int __init
-nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/* Preserve the IRQ set up by the console.  */
-
-	u8 irq;
-	/* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
-	   console reports. Check the device id of AGP bridge to distinguish
-	   UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
-	if (slot == 1 && pin == 2 &&
-	    dev->bus->self && dev->bus->self->device == 0x700f)
-		return 5;
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-	return irq;
-}
-
-void
-nautilus_kill_arch(int mode)
-{
-	struct pci_bus *bus = pci_isa_hose->bus;
-	u32 pmuport;
-	int off;
-
-	switch (mode) {
-	case LINUX_REBOOT_CMD_RESTART:
-		if (! alpha_using_srm) {
-			u8 t8;
-			pci_bus_read_config_byte(bus, 0x38, 0x43, &t8);
-			pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80);
-			outb(1, 0x92);
-			outb(0, 0x92);
-			/* NOTREACHED */
-		}
-		break;
-
-	case LINUX_REBOOT_CMD_POWER_OFF:
-		/* Assume M1543C */
-		off = 0x2000;		/* SLP_TYPE = 0, SLP_EN = 1 */
-		pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport);
-		if (!pmuport) {
-			/* M1535D/D+ */
-			off = 0x3400;	/* SLP_TYPE = 5, SLP_EN = 1 */
-			pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport);
-		}
-		pmuport &= 0xfffe;
-		outw(0xffff, pmuport);	/* Clear pending events. */
-		outw(off, pmuport + 4);
-		/* NOTREACHED */
-		break;
-	}
-}
-
-/* Perform analysis of a machine check that arrived from the system (NMI) */
-
-static void
-naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
-		       struct pt_regs *regs)
-{
-	printk("PC %lx RA %lx\n", regs->pc, regs->r26);
-	irongate_pci_clr_err();
-}
-
-/* Machine checks can come from two sources - those on the CPU and those
-   in the system.  They are analysed separately but all starts here.  */
-
-void
-nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	char *mchk_class;
-
-	/* Now for some analysis.  Machine checks fall into two classes --
-	   those picked up by the system, and those picked up by the CPU.
-	   Add to that the two levels of severity - correctable or not.  */
-
-	if (vector == SCB_Q_SYSMCHK
-	    && ((IRONGATE0->dramms & 0x300) == 0x300)) {
-		unsigned long nmi_ctl;
-
-		/* Clear ALI NMI */
-		nmi_ctl = inb(0x61);
-		nmi_ctl |= 0x0c;
-		outb(nmi_ctl, 0x61);
-		nmi_ctl &= ~0x0c;
-		outb(nmi_ctl, 0x61);
-
-		/* Write again clears error bits.  */
-		IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100;
-		mb();
-		IRONGATE0->stat_cmd;
-
-		/* Write again clears error bits.  */
-		IRONGATE0->dramms = IRONGATE0->dramms;
-		mb();
-		IRONGATE0->dramms;
-
-		draina();
-		wrmces(0x7);
-		mb();
-		return;
-	}
-
-	if (vector == SCB_Q_SYSERR)
-		mchk_class = "Correctable";
-	else if (vector == SCB_Q_SYSMCHK)
-		mchk_class = "Fatal";
-	else {
-		ev6_machine_check(vector, la_ptr);
-		return;
-	}
-
-	printk(KERN_CRIT "NAUTILUS Machine check 0x%lx "
-			 "[%s System Machine Check (NMI)]\n",
-	       vector, mchk_class);
-
-	naut_sys_machine_check(vector, la_ptr, get_irq_regs());
-
-	/* Tell the PALcode to clear the machine check */
-	draina();
-	wrmces(0x7);
-	mb();
-}
-
-extern void free_reserved_mem(void *, void *);
-extern void pcibios_claim_one_bus(struct pci_bus *);
-
-static struct resource irongate_mem = {
-	.name	= "Irongate PCI MEM",
-	.flags	= IORESOURCE_MEM,
-};
-
-void __init
-nautilus_init_pci(void)
-{
-	struct pci_controller *hose = hose_head;
-	struct pci_bus *bus;
-	struct pci_dev *irongate;
-	unsigned long bus_align, bus_size, pci_mem;
-	unsigned long memtop = max_low_pfn << PAGE_SHIFT;
-
-	/* Scan our single hose.  */
-	bus = pci_scan_bus(0, alpha_mv.pci_ops, hose);
-	hose->bus = bus;
-	pcibios_claim_one_bus(bus);
-
-	irongate = pci_get_bus_and_slot(0, 0);
-	bus->self = irongate;
-	bus->resource[1] = &irongate_mem;
-
-	pci_bus_size_bridges(bus);
-
-	/* IO port range. */
-	bus->resource[0]->start = 0;
-	bus->resource[0]->end = 0xffff;
-
-	/* Set up PCI memory range - limit is hardwired to 0xffffffff,
-	   base must be at aligned to 16Mb. */
-	bus_align = bus->resource[1]->start;
-	bus_size = bus->resource[1]->end + 1 - bus_align;
-	if (bus_align < 0x1000000UL)
-		bus_align = 0x1000000UL;
-
-	pci_mem = (0x100000000UL - bus_size) & -bus_align;
-
-	bus->resource[1]->start = pci_mem;
-	bus->resource[1]->end = 0xffffffffUL;
-	if (request_resource(&iomem_resource, bus->resource[1]) < 0)
-		printk(KERN_ERR "Failed to request MEM on hose 0\n");
-
-	if (pci_mem < memtop)
-		memtop = pci_mem;
-	if (memtop > alpha_mv.min_mem_address) {
-		free_reserved_mem(__va(alpha_mv.min_mem_address),
-				  __va(memtop));
-		printk("nautilus_init_pci: %ldk freed\n",
-			(memtop - alpha_mv.min_mem_address) >> 10);
-	}
-
-	if ((IRONGATE0->dev_vendor >> 16) > 0x7006)	/* Albacore? */
-		IRONGATE0->pci_mem = pci_mem;
-
-	pci_bus_assign_resources(bus);
-
-	/* pci_common_swizzle() relies on bus->self being NULL
-	   for the root bus, so just clear it. */
-	bus->self = NULL;
-	pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
-}
-
-/*
- * The System Vectors
- */
-
-struct alpha_machine_vector nautilus_mv __initmv = {
-	.vector_name		= "Nautilus",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_IRONGATE_IO,
-	.machine_check		= nautilus_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= IRONGATE_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= irongate_init_arch,
-	.init_irq		= nautilus_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= nautilus_init_pci,
-	.kill_arch		= nautilus_kill_arch,
-	.pci_map_irq		= nautilus_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(nautilus)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_noritake.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_noritake.c
deleted file mode 100644
index 063e594f..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_noritake.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_noritake.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the NORITAKE (AlphaServer 1000A), 
- * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/mce.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_cia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-/* Note mask bit is true for ENABLED irqs.  */
-static int cached_irq_mask;
-
-static inline void
-noritake_update_irq_hw(int irq, int mask)
-{
-	int port = 0x54a;
-	if (irq >= 32) {
-	    mask >>= 16;
-	    port = 0x54c;
-	}
-	outw(mask, port);
-}
-
-static void
-noritake_enable_irq(struct irq_data *d)
-{
-	noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
-}
-
-static void
-noritake_disable_irq(struct irq_data *d)
-{
-	noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
-}
-
-static struct irq_chip noritake_irq_type = {
-	.name		= "NORITAKE",
-	.irq_unmask	= noritake_enable_irq,
-	.irq_mask	= noritake_disable_irq,
-	.irq_mask_ack	= noritake_disable_irq,
-};
-
-static void 
-noritake_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers of NORITAKE */
-	pld = (((unsigned long) inw(0x54c) << 32)
-	       | ((unsigned long) inw(0x54a) << 16)
-	       | ((unsigned long) inb(0xa0) << 8)
-	       | inb(0x20));
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1; /* clear least bit set */
-		if (i < 16) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(i);
-		}
-	}
-}
-
-static void 
-noritake_srm_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-
-	/*
-	 * I really hate to do this, too, but the NORITAKE SRM console also
-	 * reports PCI vectors *lower* than I expected from the bit numbers
-	 * in the documentation.
-	 * But I really don't want to change the fixup code for allocation
-	 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
-	 * look nice and clean now.
-	 * So, here's this additional grotty hack... :-(
-	 */
-	if (irq >= 16)
-		irq = irq + 1;
-
-	handle_irq(irq);
-}
-
-static void __init
-noritake_init_irq(void)
-{
-	long i;
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = noritake_srm_device_interrupt;
-
-	outw(0, 0x54a);
-	outw(0, 0x54c);
-
-	for (i = 16; i < 48; ++i) {
-		irq_set_chip_and_handler(i, &noritake_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ 0x542, summary register #1:
- * Bit      Meaning
- * 0        All valid ints from summary regs 2 & 3
- * 1        QLOGIC ISP1020A SCSI
- * 2        Interrupt Line A from slot 0
- * 3        Interrupt Line B from slot 0
- * 4        Interrupt Line A from slot 1
- * 5        Interrupt line B from slot 1
- * 6        Interrupt Line A from slot 2
- * 7        Interrupt Line B from slot 2
- * 8        Interrupt Line A from slot 3
- * 9        Interrupt Line B from slot 3
- *10        Interrupt Line A from slot 4
- *11        Interrupt Line B from slot 4
- *12        Interrupt Line A from slot 5
- *13        Interrupt Line B from slot 5
- *14        Interrupt Line A from slot 6
- *15        Interrupt Line B from slot 6
- *
- * Summary @ 0x544, summary register #2:
- * Bit      Meaning
- * 0        OR of all unmasked ints in SR #2
- * 1        OR of secondary bus ints
- * 2        Interrupt Line C from slot 0
- * 3        Interrupt Line D from slot 0
- * 4        Interrupt Line C from slot 1
- * 5        Interrupt line D from slot 1
- * 6        Interrupt Line C from slot 2
- * 7        Interrupt Line D from slot 2
- * 8        Interrupt Line C from slot 3
- * 9        Interrupt Line D from slot 3
- *10        Interrupt Line C from slot 4
- *11        Interrupt Line D from slot 4
- *12        Interrupt Line C from slot 5
- *13        Interrupt Line D from slot 5
- *14        Interrupt Line C from slot 6
- *15        Interrupt Line D from slot 6
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  7       Intel PCI-EISA bridge chip
- *  8       DEC PCI-PCI bridge chip
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int __init
-noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[15][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		/* note: IDSELs 16, 17, and 25 are CORELLE only */
-		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17, S3 Trio64 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCEB */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PPB  */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  ???? */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  ???? */
-		{ 16+2,  16+2,  16+3,  32+2,  32+3},  /* IdSel 22,  slot 0 */
-		{ 16+4,  16+4,  16+5,  32+4,  32+5},  /* IdSel 23,  slot 1 */
-		{ 16+6,  16+6,  16+7,  32+6,  32+7},  /* IdSel 24,  slot 2 */
-		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 25,  slot 3 */
-		/* The following 5 are actually on PCI bus 1, which is 
-		   across the built-in bridge of the NORITAKE only.  */
-		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
-		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 17,  slot 3 */
-		{16+10, 16+10, 16+11, 32+10, 32+11},  /* IdSel 18,  slot 4 */
-		{16+12, 16+12, 16+13, 32+12, 32+13},  /* IdSel 19,  slot 5 */
-		{16+14, 16+14, 16+15, 32+14, 32+15},  /* IdSel 20,  slot 6 */
-	};
-	const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8 __init
-noritake_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
-		slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
-	}
-	else
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 8) {
-				slot = PCI_SLOT(dev->devfn) + 15;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-        struct el_common *mchk_header;
-        unsigned int code;
-
-        mchk_header = (struct el_common *)la_ptr;
-
-        /* Clear the error before any reporting.  */
-        mb();
-        mb(); /* magic */
-        draina();
-        apecs_pci_clr_err();
-        wrmces(0x7);
-        mb();
-
-        code = mchk_header->code;
-        process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
-                            (mcheck_expected(0)
-                             && (code == MCHK_NO_DEVSEL
-                                 || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
-	.vector_name		= "Noritake",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= noritake_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= noritake_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= noritake_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= noritake_map_irq,
-	.pci_swizzle		= noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_primo_mv __initmv = {
-	.vector_name		= "Noritake-Primo",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= noritake_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= noritake_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= noritake_map_irq,
-	.pci_swizzle		= noritake_swizzle,
-};
-ALIAS_MV(noritake_primo)
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_rawhide.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_rawhide.c
deleted file mode 100644
index dfd510ae..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_rawhide.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_rawhide.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the RAWHIDE.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_mcpcia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * HACK ALERT! only the boot cpu is used for interrupts.
- */
-
-
-/* Note mask bit is true for ENABLED irqs.  */
-
-static unsigned int hose_irq_masks[4] = {
-	0xff0000, 0xfe0000, 0xff0000, 0xff0000
-};
-static unsigned int cached_irq_masks[4];
-DEFINE_SPINLOCK(rawhide_irq_lock);
-
-static inline void
-rawhide_update_irq_hw(int hose, int mask)
-{
-	*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose)) = mask;
-	mb();
-	*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose));
-}
-
-#define hose_exists(h) \
-  (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
-
-static inline void 
-rawhide_enable_irq(struct irq_data *d)
-{
-	unsigned int mask, hose;
-	unsigned int irq = d->irq;
-
-	irq -= 16;
-	hose = irq / 24;
-	if (!hose_exists(hose)) /* if hose non-existent, exit */
-		return;
-
-	irq -= hose * 24;
-	mask = 1 << irq;
-
-	spin_lock(&rawhide_irq_lock);
-	mask |= cached_irq_masks[hose];
-	cached_irq_masks[hose] = mask;
-	rawhide_update_irq_hw(hose, mask);
-	spin_unlock(&rawhide_irq_lock);
-}
-
-static void 
-rawhide_disable_irq(struct irq_data *d)
-{
-	unsigned int mask, hose;
-	unsigned int irq = d->irq;
-
-	irq -= 16;
-	hose = irq / 24;
-	if (!hose_exists(hose)) /* if hose non-existent, exit */
-		return;
-
-	irq -= hose * 24;
-	mask = ~(1 << irq) | hose_irq_masks[hose];
-
-	spin_lock(&rawhide_irq_lock);
-	mask &= cached_irq_masks[hose];
-	cached_irq_masks[hose] = mask;
-	rawhide_update_irq_hw(hose, mask);
-	spin_unlock(&rawhide_irq_lock);
-}
-
-static void
-rawhide_mask_and_ack_irq(struct irq_data *d)
-{
-	unsigned int mask, mask1, hose;
-	unsigned int irq = d->irq;
-
-	irq -= 16;
-	hose = irq / 24;
-	if (!hose_exists(hose)) /* if hose non-existent, exit */
-		return;
-
-	irq -= hose * 24;
-	mask1 = 1 << irq;
-	mask = ~mask1 | hose_irq_masks[hose];
-
-	spin_lock(&rawhide_irq_lock);
-
-	mask &= cached_irq_masks[hose];
-	cached_irq_masks[hose] = mask;
-	rawhide_update_irq_hw(hose, mask);
-
-	/* Clear the interrupt.  */
-	*(vuip)MCPCIA_INT_REQ(MCPCIA_HOSE2MID(hose)) = mask1;
-
-	spin_unlock(&rawhide_irq_lock);
-}
-
-static struct irq_chip rawhide_irq_type = {
-	.name		= "RAWHIDE",
-	.irq_unmask	= rawhide_enable_irq,
-	.irq_mask	= rawhide_disable_irq,
-	.irq_mask_ack	= rawhide_mask_and_ack_irq,
-};
-
-static void 
-rawhide_srm_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-
-        /*
-         * The RAWHIDE SRM console reports PCI interrupts with a vector
-	 * 0x80 *higher* than one might expect, as PCI IRQ 0 (ie bit 0)
-	 * shows up as IRQ 24, etc, etc. We adjust it down by 8 to have
-	 * it line up with the actual bit numbers from the REQ registers,
-	 * which is how we manage the interrupts/mask. Sigh...
-	 *
-	 * Also, PCI #1 interrupts are offset some more... :-(
-         */
-
-	if (irq == 52) {
-		/* SCSI on PCI1 is special.  */
-		irq = 72;
-	}
-
-	/* Adjust by which hose it is from.  */
-	irq -= ((irq + 16) >> 2) & 0x38;
-
-	handle_irq(irq);
-}
-
-static void __init
-rawhide_init_irq(void)
-{
-	struct pci_controller *hose;
-	long i;
-
-	mcpcia_init_hoses();
-
-	/* Clear them all; only hoses that exist will be non-zero. */
-	for (i = 0; i < MCPCIA_MAX_HOSES; i++) cached_irq_masks[i] = 0;
-
-	for (hose = hose_head; hose; hose = hose->next) {
-		unsigned int h = hose->index;
-		unsigned int mask = hose_irq_masks[h];
-
-		cached_irq_masks[h] = mask;
-		*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(h)) = mask;
-		*(vuip)MCPCIA_INT_MASK1(MCPCIA_HOSE2MID(h)) = 0;
-	}
-
-	for (i = 16; i < 128; ++i) {
-		irq_set_chip_and_handler(i, &rawhide_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ MCPCIA_PCI0_INT_REQ:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 2 PCI0
- * 1        Interrupt Line B from slot 2 PCI0
- * 2        Interrupt Line C from slot 2 PCI0
- * 3        Interrupt Line D from slot 2 PCI0
- * 4        Interrupt Line A from slot 3 PCI0
- * 5        Interrupt Line B from slot 3 PCI0
- * 6        Interrupt Line C from slot 3 PCI0
- * 7        Interrupt Line D from slot 3 PCI0
- * 8        Interrupt Line A from slot 4 PCI0
- * 9        Interrupt Line B from slot 4 PCI0
- * 10       Interrupt Line C from slot 4 PCI0
- * 11       Interrupt Line D from slot 4 PCI0
- * 12       Interrupt Line A from slot 5 PCI0
- * 13       Interrupt Line B from slot 5 PCI0
- * 14       Interrupt Line C from slot 5 PCI0
- * 15       Interrupt Line D from slot 5 PCI0
- * 16       EISA interrupt (PCI 0) or SCSI interrupt (PCI 1)
- * 17-23    NA
- *
- * IdSel	
- *   1	 EISA bridge (PCI bus 0 only)
- *   2 	 PCI option slot 2
- *   3	 PCI option slot 3
- *   4   PCI option slot 4
- *   5   PCI option slot 5
- * 
- */
-
-static int __init
-rawhide_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{ 16+16, 16+16, 16+16, 16+16, 16+16}, /* IdSel 1 SCSI PCI 1 */
-		{ 16+ 0, 16+ 0, 16+ 1, 16+ 2, 16+ 3}, /* IdSel 2 slot 2 */
-		{ 16+ 4, 16+ 4, 16+ 5, 16+ 6, 16+ 7}, /* IdSel 3 slot 3 */
-		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 4 slot 4 */
-		{ 16+12, 16+12, 16+13, 16+14, 16+15}  /* IdSel 5 slot 5 */
-	};
-	const long min_idsel = 1, max_idsel = 5, irqs_per_slot = 5;
-
-	struct pci_controller *hose = dev->sysdata;
-	int irq = COMMON_TABLE_LOOKUP;
-	if (irq >= 0)
-		irq += 24 * hose->index;
-	return irq;
-}
-
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector rawhide_mv __initmv = {
-	.vector_name		= "Rawhide",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_MCPCIA_IO,
-	.machine_check		= mcpcia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= MCPCIA_DEFAULT_MEM_BASE,
-	.pci_dac_offset		= MCPCIA_DAC_OFFSET,
-
-	.nr_irqs		= 128,
-	.device_interrupt	= rawhide_srm_device_interrupt,
-
-	.init_arch		= mcpcia_init_arch,
-	.init_irq		= rawhide_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= rawhide_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(rawhide)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_ruffian.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_ruffian.c
deleted file mode 100644
index a3f48525..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_ruffian.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_ruffian.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999, 2000 Richard Henderson
- *
- * Code supporting the RUFFIAN.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_cia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-static void __init
-ruffian_init_irq(void)
-{
-	/* Invert 6&7 for i82371 */
-	*(vulp)PYXIS_INT_HILO  = 0x000000c0UL; mb();
-	*(vulp)PYXIS_INT_CNFG  = 0x00002064UL; mb();	 /* all clear */
-
-	outb(0x11,0xA0);
-	outb(0x08,0xA1);
-	outb(0x02,0xA1);
-	outb(0x01,0xA1);
-	outb(0xFF,0xA1);
-	
-	outb(0x11,0x20);
-	outb(0x00,0x21);
-	outb(0x04,0x21);
-	outb(0x01,0x21);
-	outb(0xFF,0x21);
-	
-	/* Finish writing the 82C59A PIC Operation Control Words */
-	outb(0x20,0xA0);
-	outb(0x20,0x20);
-	
-	init_i8259a_irqs();
-
-	/* Not interested in the bogus interrupts (0,3,6),
-	   NMI (1), HALT (2), flash (5), or 21142 (8).  */
-	init_pyxis_irqs(0x16f0000);
-
-	common_init_isa_dma();
-}
-
-#define RUFFIAN_LATCH	DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
-
-static void __init
-ruffian_init_rtc(void)
-{
-	/* Ruffian does not have the RTC connected to the CPU timer
-	   interrupt.  Instead, it uses the PIT connected to IRQ 0.  */
-
-	/* Setup interval timer.  */
-	outb(0x34, 0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
-	outb(RUFFIAN_LATCH & 0xff, 0x40);	/* LSB */
-	outb(RUFFIAN_LATCH >> 8, 0x40);		/* MSB */
-
-	outb(0xb6, 0x43);		/* pit counter 2: speaker */
-	outb(0x31, 0x42);
-	outb(0x13, 0x42);
-
-	setup_irq(0, &timer_irqaction);
-}
-
-static void
-ruffian_kill_arch (int mode)
-{
-	cia_kill_arch(mode);
-#if 0
-	/* This only causes re-entry to ARCSBIOS */
-	/* Perhaps this works for other PYXIS as well?  */
-	*(vuip) PYXIS_RESET = 0x0000dead;
-	mb();
-#endif
-}
-
-/*
- *  Interrupt routing:
- *
- *		Primary bus
- *	  IdSel		INTA	INTB	INTC	INTD
- * 21052   13		  -	  -	  -	  -
- * SIO	   14		 23	  -	  -	  -
- * 21143   15		 44	  -	  -	  -
- * Slot 0  17		 43	 42	 41	 40
- *
- *		Secondary bus
- *	  IdSel		INTA	INTB	INTC	INTD
- * Slot 0   8 (18)	 19	 18	 17	 16
- * Slot 1   9 (19)	 31	 30	 29	 28
- * Slot 2  10 (20)	 27	 26	 25	 24
- * Slot 3  11 (21)	 39	 38	 37	 36
- * Slot 4  12 (22)	 35	 34	 33	 32
- * 53c875  13 (23)	 20	  -	  -	  -
- *
- */
-
-static int __init
-ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-        static char irq_tab[11][5] __initdata = {
-	      /*INT  INTA INTB INTC INTD */
-		{-1,  -1,  -1,  -1,  -1},  /* IdSel 13,  21052	     */
-		{-1,  -1,  -1,  -1,  -1},  /* IdSel 14,  SIO	     */
-		{44,  44,  44,  44,  44},  /* IdSel 15,  21143	     */
-		{-1,  -1,  -1,  -1,  -1},  /* IdSel 16,  none	     */
-		{43,  43,  42,  41,  40},  /* IdSel 17,  64-bit slot */
-		/* the next 6 are actually on PCI bus 1, across the bridge */
-		{19,  19,  18,  17,  16},  /* IdSel  8,  slot 0	     */
-		{31,  31,  30,  29,  28},  /* IdSel  9,  slot 1	     */
-		{27,  27,  26,  25,  24},  /* IdSel 10,  slot 2	     */
-		{39,  39,  38,  37,  36},  /* IdSel 11,  slot 3	     */
-		{35,  35,  34,  33,  32},  /* IdSel 12,  slot 4	     */
-		{20,  20,  20,  20,  20},  /* IdSel 13,  53c875	     */
-        };
-	const long min_idsel = 13, max_idsel = 23, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8 __init
-ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}		
-	/* Check for the built-in bridge.  */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 13) {
-		slot = PCI_SLOT(dev->devfn) + 10;
-	}
-	else 
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 13) {
-				slot = PCI_SLOT(dev->devfn) + 10;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#ifdef BUILDING_FOR_MILO
-/*
- * The DeskStation Ruffian motherboard firmware does not place
- * the memory size in the PALimpure area.  Therefore, we use
- * the Bank Configuration Registers in PYXIS to obtain the size.
- */
-static unsigned long __init
-ruffian_get_bank_size(unsigned long offset)
-{
-	unsigned long bank_addr, bank, ret = 0;
-
-	/* Valid offsets are: 0x800, 0x840 and 0x880
-	   since Ruffian only uses three banks.  */
-	bank_addr = (unsigned long)PYXIS_MCR + offset;
-	bank = *(vulp)bank_addr;
-
-	/* Check BANK_ENABLE */
-	if (bank & 0x01) {
-		static unsigned long size[] __initdata = {
-			0x40000000UL, /* 0x00,   1G */
-			0x20000000UL, /* 0x02, 512M */
-			0x10000000UL, /* 0x04, 256M */
-			0x08000000UL, /* 0x06, 128M */
-			0x04000000UL, /* 0x08,  64M */
-			0x02000000UL, /* 0x0a,  32M */
-			0x01000000UL, /* 0x0c,  16M */
-			0x00800000UL, /* 0x0e,   8M */
-			0x80000000UL, /* 0x10,   2G */
-		};
-
-		bank = (bank & 0x1e) >> 1;
-		if (bank < ARRAY_SIZE(size))
-			ret = size[bank];
-	}
-
-	return ret;
-}
-#endif /* BUILDING_FOR_MILO */
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector ruffian_mv __initmv = {
-	.vector_name		= "Ruffian",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_PYXIS_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= PYXIS_DAC_OFFSET,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= pyxis_device_interrupt,
-
-	.init_arch		= pyxis_init_arch,
-	.init_irq		= ruffian_init_irq,
-	.init_rtc		= ruffian_init_rtc,
-	.init_pci		= cia_init_pci,
-	.kill_arch		= ruffian_kill_arch,
-	.pci_map_irq		= ruffian_map_irq,
-	.pci_swizzle		= ruffian_swizzle,
-};
-ALIAS_MV(ruffian)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_rx164.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_rx164.c
deleted file mode 100644
index 08ee737d..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_rx164.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_rx164.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the RX164 (PCA56+POLARIS).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_polaris.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for ENABLED irqs.  */
-static unsigned long cached_irq_mask;
-
-static inline void
-rx164_update_irq_hw(unsigned long mask)
-{
-	volatile unsigned int *irq_mask;
-
-	irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74);
-	*irq_mask = mask;
-	mb();
-	*irq_mask;
-}
-
-static inline void
-rx164_enable_irq(struct irq_data *d)
-{
-	rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
-}
-
-static void
-rx164_disable_irq(struct irq_data *d)
-{
-	rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
-}
-
-static struct irq_chip rx164_irq_type = {
-	.name		= "RX164",
-	.irq_unmask	= rx164_enable_irq,
-	.irq_mask	= rx164_disable_irq,
-	.irq_mask_ack	= rx164_disable_irq,
-};
-
-static void 
-rx164_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	volatile unsigned int *dirr;
-	long i;
-
-	/* Read the interrupt summary register.  On Polaris, this is
-	   the DIRR register in PCI config space (offset 0x84).  */
-	dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84);
-	pld = *dirr;
-
-	/*
-	 * Now for every possible bit set, work through them and call
-	 * the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1; /* clear least bit set */
-		if (i == 20) {
-			isa_no_iack_sc_device_interrupt(vector);
-		} else {
-			handle_irq(16+i);
-		}
-	}
-}
-
-static void __init
-rx164_init_irq(void)
-{
-	long i;
-
-	rx164_update_irq_hw(0);
-	for (i = 16; i < 40; ++i) {
-		irq_set_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-
-	setup_irq(16+20, &isa_cascade_irqaction);
-}
-
-
-/*
- * The RX164 changed its interrupt routing between pass1 and pass2...
- *
- * PASS1:
- *
- *      Slot    IDSEL   INTA    INTB    INTC    INTD    
- *      0       6       5       10      15      20
- *      1       7       4       9       14      19
- *      2       5       3       8       13      18
- *      3       9       2       7       12      17
- *      4       10      1       6       11      16
- *
- * PASS2:
- *      Slot    IDSEL   INTA    INTB    INTC    INTD    
- *      0       5       1       7       12      17
- *      1       6       2       8       13      18
- *      2       8       3       9       14      19
- *      3       9       4       10      15      20
- *      4       10      5       11      16      6
- *      
- */
-
-/*
- * IdSel       
- *   5  32 bit PCI option slot 0
- *   6  64 bit PCI option slot 1
- *   7  PCI-ISA bridge
- *   7  64 bit PCI option slot 2
- *   9  32 bit PCI option slot 3
- *  10  PCI-PCI bridge
- * 
- */
-
-static int __init
-rx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-#if 0
-	static char irq_tab_pass1[6][5] __initdata = {
-	  /*INT   INTA  INTB  INTC   INTD */
-	  { 16+3, 16+3, 16+8, 16+13, 16+18},      /* IdSel 5,  slot 2 */
-	  { 16+5, 16+5, 16+10, 16+15, 16+20},     /* IdSel 6,  slot 0 */
-	  { 16+4, 16+4, 16+9, 16+14, 16+19},      /* IdSel 7,  slot 1 */
-	  { -1,     -1,    -1,    -1,   -1},      /* IdSel 8, PCI/ISA bridge */
-	  { 16+2, 16+2, 16+7, 16+12, 16+17},      /* IdSel 9,  slot 3 */
-	  { 16+1, 16+1, 16+6, 16+11, 16+16},      /* IdSel 10, slot 4 */
-	};
-#else
-	static char irq_tab[6][5] __initdata = {
-	  /*INT   INTA  INTB  INTC   INTD */
-	  { 16+0, 16+0, 16+6, 16+11, 16+16},      /* IdSel 5,  slot 0 */
-	  { 16+1, 16+1, 16+7, 16+12, 16+17},      /* IdSel 6,  slot 1 */
-	  { -1,     -1,    -1,    -1,   -1},      /* IdSel 7, PCI/ISA bridge */
-	  { 16+2, 16+2, 16+8, 16+13, 16+18},      /* IdSel 8,  slot 2 */
-	  { 16+3, 16+3, 16+9, 16+14, 16+19},      /* IdSel 9,  slot 3 */
-	  { 16+4, 16+4, 16+10, 16+15, 16+5},      /* IdSel 10, PCI-PCI */
-	};
-#endif
-	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
-
-	/* JRP - Need to figure out how to distinguish pass1 from pass2,
-	   and use the correct table.  */
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector rx164_mv __initmv = {
-	.vector_name		= "RX164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_POLARIS_IO,
-	.machine_check		= polaris_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= rx164_device_interrupt,
-
-	.init_arch		= polaris_init_arch,
-	.init_irq		= rx164_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= rx164_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(rx164)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_sable.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_sable.c
deleted file mode 100644
index 8a0aa6d6..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_sable.c
+++ /dev/null
@@ -1,635 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_sable.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Sable, Sable-Gamma, and Lynx systems.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_t2.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-DEFINE_SPINLOCK(sable_lynx_irq_lock);
-
-typedef struct irq_swizzle_struct
-{
-	char irq_to_mask[64];
-	char mask_to_irq[64];
-
-	/* Note mask bit is true for DISABLED irqs.  */
-	unsigned long shadow_mask;
-
-	void (*update_irq_hw)(unsigned long bit, unsigned long mask);
-	void (*ack_irq_hw)(unsigned long bit);
-
-} irq_swizzle_t;
-
-static irq_swizzle_t *sable_lynx_irq_swizzle;
-
-static void sable_lynx_init_irq(int nr_of_irqs);
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
-
-/***********************************************************************/
-/*
- *   For SABLE, which is really baroque, we manage 40 IRQ's, but the
- *   hardware really only supports 24, not via normal ISA PIC,
- *   but cascaded custom 8259's, etc.
- *	 0-7  (char at 536)
- *	 8-15 (char at 53a)
- *	16-23 (char at 53c)
- *
- * Summary Registers (536/53a/53c):
- *
- * Bit      Meaning               Kernel IRQ
- *------------------------------------------
- * 0        PCI slot 0			34
- * 1        NCR810 (builtin)		33
- * 2        TULIP (builtin)		32
- * 3        mouse			12
- * 4        PCI slot 1			35
- * 5        PCI slot 2			36
- * 6        keyboard			1
- * 7        floppy			6
- * 8        COM2			3
- * 9        parallel port		7
- *10        EISA irq 3			-
- *11        EISA irq 4			-
- *12        EISA irq 5			5
- *13        EISA irq 6			-
- *14        EISA irq 7			-
- *15        COM1			4
- *16        EISA irq 9			9
- *17        EISA irq 10			10
- *18        EISA irq 11			11
- *19        EISA irq 12			-
- *20        EISA irq 13			-
- *21        EISA irq 14			14
- *22        NC				15
- *23        IIC				-
- */
-
-static void
-sable_update_irq_hw(unsigned long bit, unsigned long mask)
-{
-	int port = 0x537;
-
-	if (bit >= 16) {
-		port = 0x53d;
-		mask >>= 16;
-	} else if (bit >= 8) {
-		port = 0x53b;
-		mask >>= 8;
-	}
-
-	outb(mask, port);
-}
-
-static void
-sable_ack_irq_hw(unsigned long bit)
-{
-	int port, val1, val2;
-
-	if (bit >= 16) {
-		port = 0x53c;
-		val1 = 0xE0 | (bit - 16);
-		val2 = 0xE0 | 4;
-	} else if (bit >= 8) {
-		port = 0x53a;
-		val1 = 0xE0 | (bit - 8);
-		val2 = 0xE0 | 3;
-	} else {
-		port = 0x536;
-		val1 = 0xE0 | (bit - 0);
-		val2 = 0xE0 | 1;
-	}
-
-	outb(val1, port);	/* ack the slave */
-	outb(val2, 0x534);	/* ack the master */
-}
-
-static irq_swizzle_t sable_irq_swizzle = {
-	{
-		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
-		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo EISA 0-7  */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo EISA 8-15  */
-		 2,  1,  0,  4,  5, -1, -1, -1,	/* pseudo PCI */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
-		-1, -1, -1, -1, -1, -1, -1, -1 	/*  */
-	},
-	{
-		34, 33, 32, 12, 35, 36,  1,  6,	/* mask 0-7  */
-		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
-		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23  */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
-		-1, -1, -1, -1, -1, -1, -1, -1	/*  */
-	},
-	-1,
-	sable_update_irq_hw,
-	sable_ack_irq_hw
-};
-
-static void __init
-sable_init_irq(void)
-{
-	outb(-1, 0x537);	/* slave 0 */
-	outb(-1, 0x53b);	/* slave 1 */
-	outb(-1, 0x53d);	/* slave 2 */
-	outb(0x44, 0x535);	/* enable cascades in master */
-
-	sable_lynx_irq_swizzle = &sable_irq_swizzle;
-	sable_lynx_init_irq(40);
-}
-
-/*
- * PCI Fixup configuration for ALPHA SABLE (2100).
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  0       TULIP
- *  1       SCSI
- *  2       PCI-EISA bridge
- *  3       none
- *  4       none
- *  5       none
- *  6       PCI on board slot 0
- *  7       PCI on board slot 1
- *  8       PCI on board slot 2
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int __init
-sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[9][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{ 32+0,  32+0,  32+0,  32+0,  32+0},  /* IdSel 0,  TULIP  */
-		{ 32+1,  32+1,  32+1,  32+1,  32+1},  /* IdSel 1,  SCSI   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 2,  SIO   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 3,  none   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 4,  none   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 5,  none   */
-		{ 32+2,  32+2,  32+2,  32+2,  32+2},  /* IdSel 6,  slot 0 */
-		{ 32+3,  32+3,  32+3,  32+3,  32+3},  /* IdSel 7,  slot 1 */
-		{ 32+4,  32+4,  32+4,  32+4,  32+4}   /* IdSel 8,  slot 2 */
-	};
-	long min_idsel = 0, max_idsel = 8, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- *   For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit      Meaning               Kernel IRQ
- *------------------------------------------
- * 0        
- * 1        
- * 2        
- * 3        mouse			12
- * 4        
- * 5        
- * 6        keyboard			1
- * 7        floppy			6
- * 8        COM2			3
- * 9        parallel port		7
- *10        EISA irq 3			-
- *11        EISA irq 4			-
- *12        EISA irq 5			5
- *13        EISA irq 6			-
- *14        EISA irq 7			-
- *15        COM1			4
- *16        EISA irq 9			9
- *17        EISA irq 10			10
- *18        EISA irq 11			11
- *19        EISA irq 12			-
- *20        
- *21        EISA irq 14			14
- *22        EISA irq 15			15
- *23        IIC				-
- *24        VGA (builtin)               -
- *25
- *26
- *27
- *28        NCR810 (builtin)		28
- *29
- *30
- *31
- *32        PCI 0 slot 4 A primary bus  32
- *33        PCI 0 slot 4 B primary bus  33
- *34        PCI 0 slot 4 C primary bus  34
- *35        PCI 0 slot 4 D primary bus
- *36        PCI 0 slot 5 A primary bus
- *37        PCI 0 slot 5 B primary bus
- *38        PCI 0 slot 5 C primary bus
- *39        PCI 0 slot 5 D primary bus
- *40        PCI 0 slot 6 A primary bus
- *41        PCI 0 slot 6 B primary bus
- *42        PCI 0 slot 6 C primary bus
- *43        PCI 0 slot 6 D primary bus
- *44        PCI 0 slot 7 A primary bus
- *45        PCI 0 slot 7 B primary bus
- *46        PCI 0 slot 7 C primary bus
- *47        PCI 0 slot 7 D primary bus
- *48        PCI 0 slot 0 A secondary bus
- *49        PCI 0 slot 0 B secondary bus
- *50        PCI 0 slot 0 C secondary bus
- *51        PCI 0 slot 0 D secondary bus
- *52        PCI 0 slot 1 A secondary bus
- *53        PCI 0 slot 1 B secondary bus
- *54        PCI 0 slot 1 C secondary bus
- *55        PCI 0 slot 1 D secondary bus
- *56        PCI 0 slot 2 A secondary bus
- *57        PCI 0 slot 2 B secondary bus
- *58        PCI 0 slot 2 C secondary bus
- *59        PCI 0 slot 2 D secondary bus
- *60        PCI 0 slot 3 A secondary bus
- *61        PCI 0 slot 3 B secondary bus
- *62        PCI 0 slot 3 C secondary bus
- *63        PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
-	/*
-	 * Write the AIR register on the T3/T4 with the
-	 * address of the IC mask register (offset 0x40)
-	 */
-	*(vulp)T2_AIR = 0x40;
-	mb();
-	*(vulp)T2_AIR; /* re-read to force write */
-	mb();
-	*(vulp)T2_DIR = mask;    
-	mb();
-	mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
-	*(vulp)T2_VAR = (u_long) bit;
-	mb();
-	mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
-	{ /* irq_to_mask */
-		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
-		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* pseudo */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	{ /* mask_to_irq */
-		-1, -1, -1, 12, -1, -1,  1,  6,	/* mask 0-7   */
-		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
-		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23 */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* mask 24-31 */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	-1,
-	lynx_update_irq_hw,
-	lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
-	sable_lynx_irq_swizzle = &lynx_irq_swizzle;
-	sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  0       none
- *  1       none
- *  2       PCI-EISA bridge
- *  3       PCI-PCI bridge
- *  4       NCR 810 (Demi-Lynx only)
- *  5       none
- *  6       PCI on board slot 4
- *  7       PCI on board slot 5
- *  8       PCI on board slot 6
- *  9       PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- * 14       PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int __init
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[19][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
-		{   28,    28,    28,    28,    28},  /* IdSel 15,  NCR demi */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none   */
-		{   32,    32,    33,    34,    35},  /* IdSel 17,  slot 4 */
-		{   36,    36,    37,    38,    39},  /* IdSel 18,  slot 5 */
-		{   40,    40,    41,    42,    43},  /* IdSel 19,  slot 6 */
-		{   44,    44,    45,    46,    47},  /* IdSel 20,  slot 7 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 22,  none   */
-		/* The following are actually behind the PPB. */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16   none */
-		{   28,    28,    28,    28,    28},  /* IdSel 17   NCR lynx */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21   none */
-		{   48,    48,    49,    50,    51},  /* IdSel 22   slot 0 */
-		{   52,    52,    53,    54,    55},  /* IdSel 23   slot 1 */
-		{   56,    56,    57,    58,    59},  /* IdSel 24   slot 2 */
-		{   60,    60,    61,    62,    63}   /* IdSel 25   slot 3 */
-	};
-	const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8 __init
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-		slot = PCI_SLOT(dev->devfn) + 11;
-	}
-	else
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-				slot = PCI_SLOT(dev->devfn) + 11;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
-/***********************************************************************/
-/* GENERIC irq routines */
-
-static inline void
-sable_lynx_enable_irq(struct irq_data *d)
-{
-	unsigned long bit, mask;
-
-	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
-	spin_lock(&sable_lynx_irq_lock);
-	mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
-	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
-	spin_unlock(&sable_lynx_irq_lock);
-#if 0
-	printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
-	       __func__, mask, bit, irq);
-#endif
-}
-
-static void
-sable_lynx_disable_irq(struct irq_data *d)
-{
-	unsigned long bit, mask;
-
-	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
-	spin_lock(&sable_lynx_irq_lock);
-	mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
-	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
-	spin_unlock(&sable_lynx_irq_lock);
-#if 0
-	printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
-	       __func__, mask, bit, irq);
-#endif
-}
-
-static void
-sable_lynx_mask_and_ack_irq(struct irq_data *d)
-{
-	unsigned long bit, mask;
-
-	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
-	spin_lock(&sable_lynx_irq_lock);
-	mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
-	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
-	sable_lynx_irq_swizzle->ack_irq_hw(bit);
-	spin_unlock(&sable_lynx_irq_lock);
-}
-
-static struct irq_chip sable_lynx_irq_type = {
-	.name		= "SABLE/LYNX",
-	.irq_unmask	= sable_lynx_enable_irq,
-	.irq_mask	= sable_lynx_disable_irq,
-	.irq_mask_ack	= sable_lynx_mask_and_ack_irq,
-};
-
-static void 
-sable_lynx_srm_device_interrupt(unsigned long vector)
-{
-	/* Note that the vector reported by the SRM PALcode corresponds
-	   to the interrupt mask bits, but we have to manage via the
-	   so-called legacy IRQs for many common devices.  */
-
-	int bit, irq;
-
-	bit = (vector - 0x800) >> 4;
-	irq = sable_lynx_irq_swizzle->mask_to_irq[bit];
-#if 0
-	printk("%s: vector 0x%lx bit 0x%x irq 0x%x\n",
-	       __func__, vector, bit, irq);
-#endif
-	handle_irq(irq);
-}
-
-static void __init
-sable_lynx_init_irq(int nr_of_irqs)
-{
-	long i;
-
-	for (i = 0; i < nr_of_irqs; ++i) {
-		irq_set_chip_and_handler(i, &sable_lynx_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-}
-
-static void __init
-sable_lynx_init_pci(void)
-{
-	common_init_pci();
-}
-
-/*****************************************************************/
-/*
- * The System Vectors
- *
- * In order that T2_HAE_ADDRESS should be a constant, we play
- * these games with GAMMA_BIAS.
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
-	.vector_name		= "Sable",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= sable_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= sable_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= 0
-	} }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector sable_gamma_mv __initmv = {
-	.vector_name		= "Sable-Gamma",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= sable_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= sable_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= _GAMMA_BIAS
-	} }
-};
-ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
-	.vector_name		= "Lynx",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= lynx_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= lynx_map_irq,
-	.pci_swizzle		= lynx_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= _GAMMA_BIAS
-	} }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_sio.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_sio.c
deleted file mode 100644
index febd24eb..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_sio.c
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_sio.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up.  */
-struct 
-{
-	unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-	/* The AlphaBook1 has LCD video fixed at 800x600,
-	   37 rows and 100 cols. */
-	screen_info.orig_y = 37;
-	screen_info.orig_video_cols = 100;
-	screen_info.orig_video_lines = 37;
-
-	lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- *		PIRQ0 -> irq 15
- *		PIRQ1 -> irq  9
- *		PIRQ2 -> irq 10
- *		PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO.  For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
-	unsigned int orig_route_tab;
-
-	/* First, ALWAYS read and print the original setting. */
-	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				  &orig_route_tab);
-	printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
-	       orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	saved_config.orig_route_tab = orig_route_tab;
-#endif
-
-	/* Now override with desired setting. */
-	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   alpha_mv.sys.sio.route_tab);
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
-	unsigned int level_bits = 0;
-	struct pci_dev *dev = NULL;
-
-	/* Iterate through the devices, collecting IRQ levels.  */
-	for_each_pci_dev(dev) {
-		if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
-		    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
-			continue;
-
-		if (dev->irq)
-			level_bits |= (1 << dev->irq);
-	}
-	return level_bits;
-}
-
-static void __init
-sio_fixup_irq_levels(unsigned int level_bits)
-{
-	unsigned int old_level_bits;
-
-	/*
-	 * Now, make all PCI interrupts level sensitive.  Notice:
-	 * these registers must be accessed byte-wise.  inw()/outw()
-	 * don't work.
-	 *
-	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
-	 *  so that the only bits getting set are for devices actually found.
-	 * Note that we do preserve the remainder of the bits, which we hope
-	 *  will be set correctly by ARC/SRM.
-	 *
-	 * Note: we at least preserve any level-set bits on AlphaBook1
-	 */
-	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
-	level_bits |= (old_level_bits & 0x71ff);
-
-	outb((level_bits >> 0) & 0xff, 0x4d0);
-	outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline int __init
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * The Noname board has 5 PCI slots with each of the 4
-	 * interrupt pins routed to different pins on the PCI/ISA
-	 * bridge (PIRQ0-PIRQ3).  The table below is based on
-	 * information available at:
-	 *
-	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
-	 *
-	 * I have no information on the Avanti interrupt routing, but
-	 * the routing seems to be identical to the Noname except
-	 * that the Avanti has an additional slot whose routing I'm
-	 * unsure of.
-	 *
-	 * pirq_tab[0] is a fake entry to deal with old PCI boards
-	 * that have the interrupt pin number hardwired to 0 (meaning
-	 * that they use the default INTA line, if they are interrupt
-	 * driven at all).
-	 */
-	static char irq_tab[][5] __initdata = {
-		/*INT A   B   C   D */
-		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
-		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
-		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
-		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
-		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
-	};
-	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
-}
-
-static inline int __init
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[][5] __initdata = {
-		/*INT A   B   C   D */
-		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
-		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
-		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
-	};
-	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
-	common_init_pci();
-	sio_pci_route();
-	sio_fixup_irq_levels(sio_collect_irq_levels());
-
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	} else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-
-		/* Enabling things in the Super IO chip doesn't actually
-		 * configure and enable things, the legacy drivers still
-		 * need to do the actual configuration and enabling.
-		 * This only unblocks them.
-		 */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
-		/* Don't bother on the Avanti family.
-		 * None of them had on-board IDE.
-		 */
-		pc873xx_enable_ide();
-#endif
-		pc873xx_enable_epp19();
-	}
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
-	struct pci_dev *dev;
-	unsigned char orig, config;
-
-	common_init_pci();
-	sio_pci_route();
-
-	/*
-	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
-	 * is sensitive to PCI bus bursts, so we must DISABLE
-	 * burst mode for the NCR 8xx SCSI... :-(
-	 *
-	 * Note that the NCR810 SCSI driver must preserve the
-	 * setting of the bit in order for this to work.  At the
-	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
-	 * 53c7,8xx.c DOES.
-	 */
-
-	dev = NULL;
-	while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
-		if (dev->device == PCI_DEVICE_ID_NCR_53C810
-		    || dev->device == PCI_DEVICE_ID_NCR_53C815
-		    || dev->device == PCI_DEVICE_ID_NCR_53C820
-		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
-			unsigned long io_port;
-			unsigned char ctest4;
-
-			io_port = dev->resource[0].start;
-			ctest4 = inb(io_port+0x21);
-			if (!(ctest4 & 0x80)) {
-				printk("AlphaBook1 NCR init: setting"
-				       " burst disable\n");
-				outb(ctest4 | 0x80, io_port+0x21);
-			}
-                }
-	}
-
-	/* Do not set *ANY* level triggers for AlphaBook1. */
-	sio_fixup_irq_levels(0);
-
-	/* Make sure that register PR1 indicates 1Mb mem */
-	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
-	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
-	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
-	if ((config & 0xc0) != 0xc0) {
-		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
-		config |= 0xc0;
-		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
-	}
-	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	/* Since we cannot read the PCI DMA Window CSRs, we
-	 * cannot restore them here.
-	 *
-	 * However, we CAN read the PIRQ route register, so restore it
-	 * now...
-	 */
- 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
-	.vector_name		= "AlphaBook1",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= alphabook1_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphabook1_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
-		.route_tab	= 0x0e0f0a0a,
-	}}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
-struct alpha_machine_vector avanti_mv __initmv = {
-	.vector_name		= "Avanti",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
-	}}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
-struct alpha_machine_vector noname_mv __initmv = {
-	.vector_name		= "Noname",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* For UDB, the only available PCI slot must not map to IRQ 9,
-		   since that's the builtin MSS sound chip. That PCI slot
-		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
-		   instead.
-
-		   Unfortunately we have to do this for NONAME as well, since
-		   they are co-indicated when the platform type "Noname" is
-		   selected... :-(  */
-
-		.route_tab	= 0x0b0a0f0d,
-	}}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
-	.vector_name		= "Platform2000",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= p2k_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
-	.vector_name		= "XL",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= XL_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(xl)
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_sx164.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_sx164.c
deleted file mode 100644
index d063b360..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_sx164.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_sx164.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999, 2000 Richard Henderson
- *
- * Code supporting the SX164 (PCA56+PYXIS).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_cia.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-#include <asm/special_insns.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-static void __init
-sx164_init_irq(void)
-{
-	outb(0, DMA1_RESET_REG);
-	outb(0, DMA2_RESET_REG);
-	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
-	outb(0, DMA2_MASK_REG);
-
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	init_i8259a_irqs();
-
-	/* Not interested in the bogus interrupts (0,3,4,5,40-47),
-	   NMI (1), or HALT (2).  */
-	if (alpha_using_srm)
-		init_srm_irqs(40, 0x3f0000);
-	else
-		init_pyxis_irqs(0xff00003f0000UL);
-
-	setup_irq(16+6, &timer_cascade_irqaction);
-}
-
-/*
- * PCI Fixup configuration.
- *
- * Summary @ PYXIS_INT_REQ:
- * Bit      Meaning
- * 0        RSVD
- * 1        NMI
- * 2        Halt/Reset switch
- * 3        MBZ
- * 4        RAZ
- * 5        RAZ
- * 6        Interval timer (RTC)
- * 7        PCI-ISA Bridge
- * 8        Interrupt Line A from slot 3
- * 9        Interrupt Line A from slot 2
- *10        Interrupt Line A from slot 1
- *11        Interrupt Line A from slot 0
- *12        Interrupt Line B from slot 3
- *13        Interrupt Line B from slot 2
- *14        Interrupt Line B from slot 1
- *15        Interrupt line B from slot 0
- *16        Interrupt Line C from slot 3
- *17        Interrupt Line C from slot 2
- *18        Interrupt Line C from slot 1
- *19        Interrupt Line C from slot 0
- *20        Interrupt Line D from slot 3
- *21        Interrupt Line D from slot 2
- *22        Interrupt Line D from slot 1
- *23        Interrupt Line D from slot 0
- *
- * IdSel       
- *   5  32 bit PCI option slot 2
- *   6  64 bit PCI option slot 0
- *   7  64 bit PCI option slot 1
- *   8  Cypress I/O
- *   9  32 bit PCI option slot 3
- */
-
-static int __init
-sx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{ 16+ 9, 16+ 9, 16+13, 16+17, 16+21}, /* IdSel 5 slot 2 J17 */
-		{ 16+11, 16+11, 16+15, 16+19, 16+23}, /* IdSel 6 slot 0 J19 */
-		{ 16+10, 16+10, 16+14, 16+18, 16+22}, /* IdSel 7 slot 1 J18 */
-		{    -1,    -1,    -1,	  -1,    -1}, /* IdSel 8 SIO        */
-		{ 16+ 8, 16+ 8, 16+12, 16+16, 16+20}  /* IdSel 9 slot 3 J15 */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static void __init
-sx164_init_pci(void)
-{
-	cia_init_pci();
-	SMC669_Init(0);
-}
-
-static void __init
-sx164_init_arch(void)
-{
-	/*
-	 * OSF palcode v1.23 forgets to enable PCA56 Motion Video
-	 * Instructions. Let's enable it.
-	 * We have to check palcode revision because CSERVE interface
-	 * is subject to change without notice. For example, it
-	 * has been changed completely since v1.16 (found in MILO
-	 * distribution). -ink
-	 */
-	struct percpu_struct *cpu = (struct percpu_struct*)
-		((char*)hwrpb + hwrpb->processor_offset);
-
-	if (amask(AMASK_MAX) != 0
-	    && alpha_using_srm
-	    && (cpu->pal_revision & 0xffff) <= 0x117) {
-		__asm__ __volatile__(
-		"lda	$16,8($31)\n"
-		"call_pal 9\n"		/* Allow PALRES insns in kernel mode */
-		".long  0x64000118\n\n"	/* hw_mfpr $0,icsr */
-		"ldah	$16,(1<<(19-16))($31)\n"
-		"or	$0,$16,$0\n"	/* set MVE bit */
-		".long  0x74000118\n"	/* hw_mtpr $0,icsr */
-		"lda	$16,9($31)\n"
-		"call_pal 9"		/* Disable PALRES insns */
-		: : : "$0", "$16");
-		printk("PCA56 MVI set enabled\n");
-	}
-
-	pyxis_init_arch();
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector sx164_mv __initmv = {
-	.vector_name		= "SX164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_PYXIS_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= PYXIS_DAC_OFFSET,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= pyxis_device_interrupt,
-
-	.init_arch		= sx164_init_arch,
-	.init_irq		= sx164_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sx164_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= sx164_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(sx164)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_takara.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_takara.c
deleted file mode 100644
index dd0f1eae..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_takara.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_takara.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the TAKARA.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_cia.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned long cached_irq_mask[2] = { -1, -1 };
-
-static inline void
-takara_update_irq_hw(unsigned long irq, unsigned long mask)
-{
-	int regaddr;
-
-	mask = (irq >= 64 ? mask << 16 : mask >> ((irq - 16) & 0x30));
-	regaddr = 0x510 + (((irq - 16) >> 2) & 0x0c);
-	outl(mask & 0xffff0000UL, regaddr);
-}
-
-static inline void
-takara_enable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	unsigned long mask;
-	mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
-	takara_update_irq_hw(irq, mask);
-}
-
-static void
-takara_disable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	unsigned long mask;
-	mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
-	takara_update_irq_hw(irq, mask);
-}
-
-static struct irq_chip takara_irq_type = {
-	.name		= "TAKARA",
-	.irq_unmask	= takara_enable_irq,
-	.irq_mask	= takara_disable_irq,
-	.irq_mask_ack	= takara_disable_irq,
-};
-
-static void
-takara_device_interrupt(unsigned long vector)
-{
-	unsigned intstatus;
-
-	/*
-	 * The PALcode will have passed us vectors 0x800 or 0x810,
-	 * which are fairly arbitrary values and serve only to tell
-	 * us whether an interrupt has come in on IRQ0 or IRQ1. If
-	 * it's IRQ1 it's a PCI interrupt; if it's IRQ0, it's
-	 * probably ISA, but PCI interrupts can come through IRQ0
-	 * as well if the interrupt controller isn't in accelerated
-	 * mode.
-	 *
-	 * OTOH, the accelerator thing doesn't seem to be working
-	 * overly well, so what we'll do instead is try directly
-	 * examining the Master Interrupt Register to see if it's a
-	 * PCI interrupt, and if _not_ then we'll pass it on to the
-	 * ISA handler.
-	 */
-
-	intstatus = inw(0x500) & 15;
-	if (intstatus) {
-		/*
-		 * This is a PCI interrupt. Check each bit and
-		 * despatch an interrupt if it's set.
-		 */
-
-		if (intstatus & 8) handle_irq(16+3);
-		if (intstatus & 4) handle_irq(16+2);
-		if (intstatus & 2) handle_irq(16+1);
-		if (intstatus & 1) handle_irq(16+0);
-	} else {
-		isa_device_interrupt (vector);
-	}
-}
-
-static void 
-takara_srm_device_interrupt(unsigned long vector)
-{
-	int irq = (vector - 0x800) >> 4;
-	handle_irq(irq);
-}
-
-static void __init
-takara_init_irq(void)
-{
-	long i;
-
-	init_i8259a_irqs();
-
-	if (alpha_using_srm) {
-		alpha_mv.device_interrupt = takara_srm_device_interrupt;
-	} else {
-		unsigned int ctlreg = inl(0x500);
-
-		/* Return to non-accelerated mode.  */
-		ctlreg &= ~0x8000;
-		outl(ctlreg, 0x500);
-
-		/* Enable the PCI interrupt register.  */
-		ctlreg = 0x05107c00;
-		outl(ctlreg, 0x500);
-	}
-
-	for (i = 16; i < 128; i += 16)
-		takara_update_irq_hw(i, -1);
-
-	for (i = 16; i < 128; ++i) {
-		irq_set_chip_and_handler(i, &takara_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-}
-
-
-/*
- * The Takara has PCI devices 1, 2, and 3 configured to slots 20,
- * 19, and 18 respectively, in the default configuration. They can
- * also be jumpered to slots 8, 7, and 6 respectively, which is fun
- * because the SIO ISA bridge can also be slot 7. However, the SIO
- * doesn't explicitly generate PCI-type interrupts, so we can
- * assign it whatever the hell IRQ we like and it doesn't matter.
- */
-
-static int __init
-takara_map_irq_srm(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[15][5] __initdata = {
-		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot  6 == device 3 */
-		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot  7 == device 2 */
-		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot  8 == device 1 */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot  9 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 10 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 11 == nothing */
-		/* These are behind the bridges.  */
-		{   12,   12,   13,   14,   15},   /* slot 12 == nothing */
-		{    8,    8,    9,   19,   11},   /* slot 13 == nothing */
-		{    4,    4,    5,    6,    7},   /* slot 14 == nothing */
-		{    0,    0,    1,    2,    3},   /* slot 15 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 16 == nothing */
-		{64+ 0, 64+0, 64+1, 64+2, 64+3},   /* slot 17= device 4 */
-		{48+ 0, 48+0, 48+1, 48+2, 48+3},   /* slot 18= device 3 */
-		{32+ 0, 32+0, 32+1, 32+2, 32+3},   /* slot 19= device 2 */
-		{16+ 0, 16+0, 16+1, 16+2, 16+3},   /* slot 20= device 1 */
-	};
-	const long min_idsel = 6, max_idsel = 20, irqs_per_slot = 5;
-        int irq = COMMON_TABLE_LOOKUP;
-	if (irq >= 0 && irq < 16) {
-		/* Guess that we are behind a bridge.  */
-		unsigned int busslot = PCI_SLOT(dev->bus->self->devfn);
-		irq += irq_tab[busslot-min_idsel][0];
-	}
-	return irq;
-}
-
-static int __init
-takara_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[15][5] __initdata = {
-		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot  6 == device 3 */
-		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot  7 == device 2 */
-		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot  8 == device 1 */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot  9 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 10 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 11 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 12 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 13 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 14 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 15 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 16 == nothing */
-		{   -1,   -1,   -1,   -1,   -1},   /* slot 17 == nothing */
-		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot 18 == device 3 */
-		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot 19 == device 2 */
-		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot 20 == device 1 */
-	};
-	const long min_idsel = 6, max_idsel = 20, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8 __init
-takara_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot = PCI_SLOT(dev->devfn);
-	int pin = *pinp;
-	unsigned int ctlreg = inl(0x500);
-	unsigned int busslot;
-
-	if (!dev->bus->self)
-		return slot;
-
-	busslot = PCI_SLOT(dev->bus->self->devfn);
-	/* Check for built-in bridges.  */
-	if (dev->bus->number != 0
-	    && busslot > 16
-	    && ((1<<(36-busslot)) & ctlreg)) {
-		if (pin == 1)
-			pin += (20 - busslot);
-		else {
-			printk(KERN_WARNING "takara_swizzle: can only "
-			       "handle cards with INTA IRQ pin.\n");
-		}
-	} else {
-		/* Must be a card-based bridge.  */
-		printk(KERN_WARNING "takara_swizzle: cannot handle "
-		       "card-bridge behind builtin bridge yet.\n");
-	}
-
-	*pinp = pin;
-	return slot;
-}
-
-static void __init
-takara_init_pci(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.pci_map_irq = takara_map_irq_srm;
-
-	cia_init_pci();
-
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	} else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-		pc873xx_enable_ide();
-	}
-}
-
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector takara_mv __initmv = {
-	.vector_name		= "Takara",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 128,
-	.device_interrupt	= takara_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= takara_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= takara_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= takara_map_irq,
-	.pci_swizzle		= takara_swizzle,
-};
-ALIAS_MV(takara)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_titan.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_titan.c
deleted file mode 100644
index 2533db28..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_titan.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/sys_titan.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996, 1999 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *      Copyright (C) 1999, 2000 Jeff Wiedemeier
- *
- * Code supporting TITAN systems (EV6+TITAN), currently:
- *      Privateer
- *	Falcon
- *	Granite
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_titan.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "err_impl.h"
-
-
-/*
- * Titan generic
- */
-
-/*
- * Titan supports up to 4 CPUs
- */
-static unsigned long titan_cpu_irq_affinity[4] = { ~0UL, ~0UL, ~0UL, ~0UL };
-
-/*
- * Mask is set (1) if enabled
- */
-static unsigned long titan_cached_irq_mask;
-
-/*
- * Need SMP-safe access to interrupt CSRs
- */
-DEFINE_SPINLOCK(titan_irq_lock);
-
-static void
-titan_update_irq_hw(unsigned long mask)
-{
-	register titan_cchip *cchip = TITAN_cchip;
-	unsigned long isa_enable = 1UL << 55;
-	register int bcpu = boot_cpuid;
-
-#ifdef CONFIG_SMP
-	cpumask_t cpm;
-	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
-	unsigned long mask0, mask1, mask2, mask3, dummy;
-
-	cpumask_copy(&cpm, cpu_present_mask);
-	mask &= ~isa_enable;
-	mask0 = mask & titan_cpu_irq_affinity[0];
-	mask1 = mask & titan_cpu_irq_affinity[1];
-	mask2 = mask & titan_cpu_irq_affinity[2];
-	mask3 = mask & titan_cpu_irq_affinity[3];
-
-	if (bcpu == 0) mask0 |= isa_enable;
-	else if (bcpu == 1) mask1 |= isa_enable;
-	else if (bcpu == 2) mask2 |= isa_enable;
-	else mask3 |= isa_enable;
-
-	dim0 = &cchip->dim0.csr;
-	dim1 = &cchip->dim1.csr;
-	dim2 = &cchip->dim2.csr;
-	dim3 = &cchip->dim3.csr;
-	if (!cpumask_test_cpu(0, &cpm)) dim0 = &dummy;
-	if (!cpumask_test_cpu(1, &cpm)) dim1 = &dummy;
-	if (!cpumask_test_cpu(2, &cpm)) dim2 = &dummy;
-	if (!cpumask_test_cpu(3, &cpm)) dim3 = &dummy;
-
-	*dim0 = mask0;
-	*dim1 = mask1;
-	*dim2 = mask2;
-	*dim3 = mask3;
-	mb();
-	*dim0;
-	*dim1;
-	*dim2;
-	*dim3;
-#else
-	volatile unsigned long *dimB;
-	dimB = &cchip->dim0.csr;
-	if (bcpu == 1) dimB = &cchip->dim1.csr;
-	else if (bcpu == 2) dimB = &cchip->dim2.csr;
-	else if (bcpu == 3) dimB = &cchip->dim3.csr;
-
-	*dimB = mask | isa_enable;
-	mb();
-	*dimB;
-#endif
-}
-
-static inline void
-titan_enable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	spin_lock(&titan_irq_lock);
-	titan_cached_irq_mask |= 1UL << (irq - 16);
-	titan_update_irq_hw(titan_cached_irq_mask);
-	spin_unlock(&titan_irq_lock);
-}
-
-static inline void
-titan_disable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	spin_lock(&titan_irq_lock);
-	titan_cached_irq_mask &= ~(1UL << (irq - 16));
-	titan_update_irq_hw(titan_cached_irq_mask);
-	spin_unlock(&titan_irq_lock);
-}
-
-static void
-titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
-{
-	int cpu;
-
-	for (cpu = 0; cpu < 4; cpu++) {
-		if (cpumask_test_cpu(cpu, &affinity))
-			titan_cpu_irq_affinity[cpu] |= 1UL << irq;
-		else
-			titan_cpu_irq_affinity[cpu] &= ~(1UL << irq);
-	}
-
-}
-
-static int
-titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
-		       bool force)
-{ 
-	unsigned int irq = d->irq;
-	spin_lock(&titan_irq_lock);
-	titan_cpu_set_irq_affinity(irq - 16, *affinity);
-	titan_update_irq_hw(titan_cached_irq_mask);
-	spin_unlock(&titan_irq_lock);
-
-	return 0;
-}
-
-static void
-titan_device_interrupt(unsigned long vector)
-{
-	printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n");
-}
-
-static void 
-titan_srm_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-	handle_irq(irq);
-}
-
-
-static void __init
-init_titan_irqs(struct irq_chip * ops, int imin, int imax)
-{
-	long i;
-	for (i = imin; i <= imax; ++i) {
-		irq_set_chip_and_handler(i, ops, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-}
-
-static struct irq_chip titan_irq_type = {
-       .name			= "TITAN",
-       .irq_unmask		= titan_enable_irq,
-       .irq_mask		= titan_disable_irq,
-       .irq_mask_ack		= titan_disable_irq,
-       .irq_set_affinity	= titan_set_irq_affinity,
-};
-
-static irqreturn_t
-titan_intr_nop(int irq, void *dev_id)
-{
-      /*
-       * This is a NOP interrupt handler for the purposes of
-       * event counting -- just return.
-       */                                                                     
-       return IRQ_HANDLED;
-}
-
-static void __init
-titan_init_irq(void)
-{
-	if (alpha_using_srm && !alpha_mv.device_interrupt)
-		alpha_mv.device_interrupt = titan_srm_device_interrupt;
-	if (!alpha_mv.device_interrupt)
-		alpha_mv.device_interrupt = titan_device_interrupt;
-
-	titan_update_irq_hw(0);
-
-	init_titan_irqs(&titan_irq_type, 16, 63 + 16);
-}
-  
-static void __init
-titan_legacy_init_irq(void)
-{
-	/* init the legacy dma controller */
-	outb(0, DMA1_RESET_REG);
-	outb(0, DMA2_RESET_REG);
-	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
-	outb(0, DMA2_MASK_REG);
-
-	/* init the legacy irq controller */
-	init_i8259a_irqs();
-
-	/* init the titan irqs */
-	titan_init_irq();
-}
-
-void
-titan_dispatch_irqs(u64 mask)
-{
-	unsigned long vector;
-
-	/*
-	 * Mask down to those interrupts which are enable on this processor
-	 */
-	mask &= titan_cpu_irq_affinity[smp_processor_id()];
-
-	/*
-	 * Dispatch all requested interrupts 
-	 */
-	while (mask) {
-		/* convert to SRM vector... priority is <63> -> <0> */
-		vector = 63 - __kernel_ctlz(mask);
-		mask &= ~(1UL << vector);	/* clear it out 	 */
-		vector = 0x900 + (vector << 4);	/* convert to SRM vector */
-		
-		/* dispatch it */
-		alpha_mv.device_interrupt(vector);
-	}
-}
-  
-
-/*
- * Titan Family
- */
-static void __init
-titan_request_irq(unsigned int irq, irq_handler_t handler,
-		  unsigned long irqflags, const char *devname,
-		  void *dev_id)
-{
-	int err;
-	err = request_irq(irq, handler, irqflags, devname, dev_id);
-	if (err) {
-		printk("titan_request_irq for IRQ %d returned %d; ignoring\n",
-		       irq, err);
-	}
-}
-
-static void __init
-titan_late_init(void)
-{
-	/*
-	 * Enable the system error interrupts. These interrupts are 
-	 * all reported to the kernel as machine checks, so the handler
-	 * is a nop so it can be called to count the individual events.
-	 */
-	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
-		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
-		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
-		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
-		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
-		    "PChip 1 C_Error", NULL);
-
-	/* 
-	 * Register our error handlers.
-	 */
-	titan_register_error_handlers();
-
-	/*
-	 * Check if the console left us any error logs.
-	 */
-	cdl_check_console_data_log();
-
-}
-
-static int __devinit
-titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	u8 intline;
-	int irq;
-
- 	/* Get the current intline.  */
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
-	irq = intline;
-
- 	/* Is it explicitly routed through ISA?  */
- 	if ((irq & 0xF0) == 0xE0)
- 		return irq;
- 
- 	/* Offset by 16 to make room for ISA interrupts 0 - 15.  */
- 	return irq + 16;
-}
-
-static void __init
-titan_init_pci(void)
-{
- 	/*
- 	 * This isn't really the right place, but there's some init
- 	 * that needs to be done after everything is basically up.
- 	 */
- 	titan_late_init();
- 
-	/* Indicate that we trust the console to configure things properly */
-	pci_set_flags(PCI_PROBE_ONLY);
-	common_init_pci();
-	SMC669_Init(0);
-	locate_and_init_vga(NULL);
-}
-
-
-/*
- * Privateer
- */
-static void __init
-privateer_init_pci(void)
-{
-	/*
-	 * Hook a couple of extra err interrupts that the
-	 * common titan code won't.
-	 */
-	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
-		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
-		    "Temperature Warning", NULL);
-
-	/*
-	 * Finish with the common version.
-	 */
-	return titan_init_pci();
-}
-
-
-/*
- * The System Vectors.
- */
-struct alpha_machine_vector titan_mv __initmv = {
-	.vector_name		= "TITAN",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TITAN_IO,
-	.machine_check		= titan_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TITAN_DAC_OFFSET,
-
-	.nr_irqs		= 80,	/* 64 + 16 */
-	/* device_interrupt will be filled in by titan_init_irq */
-
-	.agp_info		= titan_agp_info,
-
-	.init_arch		= titan_init_arch,
-	.init_irq		= titan_legacy_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= titan_init_pci,
-
-	.kill_arch		= titan_kill_arch,
-	.pci_map_irq		= titan_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(titan)
-
-struct alpha_machine_vector privateer_mv __initmv = {
-	.vector_name		= "PRIVATEER",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_TITAN_IO,
-	.machine_check		= privateer_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-	.pci_dac_offset		= TITAN_DAC_OFFSET,
-
-	.nr_irqs		= 80,	/* 64 + 16 */
-	/* device_interrupt will be filled in by titan_init_irq */
-
-	.agp_info		= titan_agp_info,
-
-	.init_arch		= titan_init_arch,
-	.init_irq		= titan_legacy_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= privateer_init_pci,
-
-	.kill_arch		= titan_kill_arch,
-	.pci_map_irq		= titan_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-/* No alpha_mv alias for privateer since we compile it 
-   in unconditionally with titan; setup_arch knows how to cope. */
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/sys_wildfire.c b/ANDROID_3.4.5/arch/alpha/kernel/sys_wildfire.c
deleted file mode 100644
index ee187488..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/sys_wildfire.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/sys_wildfire.c
- *
- *  Wildfire support.
- *
- *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_wildfire.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-static unsigned long cached_irq_mask[WILDFIRE_NR_IRQS/(sizeof(long)*8)];
-
-DEFINE_SPINLOCK(wildfire_irq_lock);
-
-static int doing_init_irq_hw = 0;
-
-static void
-wildfire_update_irq_hw(unsigned int irq)
-{
-	int qbbno = (irq >> 8) & (WILDFIRE_MAX_QBB - 1);
-	int pcano = (irq >> 6) & (WILDFIRE_PCA_PER_QBB - 1);
-	wildfire_pca *pca;
-	volatile unsigned long * enable0;
-
-	if (!WILDFIRE_PCA_EXISTS(qbbno, pcano)) {
-		if (!doing_init_irq_hw) {
-			printk(KERN_ERR "wildfire_update_irq_hw:"
-			       " got irq %d for non-existent PCA %d"
-			       " on QBB %d.\n",
-			       irq, pcano, qbbno);
-		}
-		return;
-	}
-
-	pca = WILDFIRE_pca(qbbno, pcano);
-	enable0 = (unsigned long *) &pca->pca_int[0].enable; /* ??? */
-
-	*enable0 = cached_irq_mask[qbbno * WILDFIRE_PCA_PER_QBB + pcano];
-	mb();
-	*enable0;
-}
-
-static void __init
-wildfire_init_irq_hw(void)
-{
-#if 0
-	register wildfire_pca * pca = WILDFIRE_pca(0, 0);
-	volatile unsigned long * enable0, * enable1, * enable2, *enable3;
-	volatile unsigned long * target0, * target1, * target2, *target3;
-
-	enable0 = (unsigned long *) &pca->pca_int[0].enable;
-	enable1 = (unsigned long *) &pca->pca_int[1].enable;
-	enable2 = (unsigned long *) &pca->pca_int[2].enable;
-	enable3 = (unsigned long *) &pca->pca_int[3].enable;
-
-	target0 = (unsigned long *) &pca->pca_int[0].target;
-	target1 = (unsigned long *) &pca->pca_int[1].target;
-	target2 = (unsigned long *) &pca->pca_int[2].target;
-	target3 = (unsigned long *) &pca->pca_int[3].target;
-
-	*enable0 = *enable1 = *enable2 = *enable3 = 0;
-
-	*target0 = (1UL<<8) | WILDFIRE_QBB(0);
-	*target1 = *target2 = *target3 = 0;
-
-	mb();
-
-	*enable0; *enable1; *enable2; *enable3;
-	*target0; *target1; *target2; *target3;
-
-#else
-	int i;
-
-	doing_init_irq_hw = 1;
-
-	/* Need to update only once for every possible PCA. */
-	for (i = 0; i < WILDFIRE_NR_IRQS; i+=WILDFIRE_IRQ_PER_PCA)
-		wildfire_update_irq_hw(i);
-
-	doing_init_irq_hw = 0;
-#endif
-}
-
-static void
-wildfire_enable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	if (irq < 16)
-		i8259a_enable_irq(d);
-
-	spin_lock(&wildfire_irq_lock);
-	set_bit(irq, &cached_irq_mask);
-	wildfire_update_irq_hw(irq);
-	spin_unlock(&wildfire_irq_lock);
-}
-
-static void
-wildfire_disable_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	if (irq < 16)
-		i8259a_disable_irq(d);
-
-	spin_lock(&wildfire_irq_lock);
-	clear_bit(irq, &cached_irq_mask);
-	wildfire_update_irq_hw(irq);
-	spin_unlock(&wildfire_irq_lock);
-}
-
-static void
-wildfire_mask_and_ack_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	if (irq < 16)
-		i8259a_mask_and_ack_irq(d);
-
-	spin_lock(&wildfire_irq_lock);
-	clear_bit(irq, &cached_irq_mask);
-	wildfire_update_irq_hw(irq);
-	spin_unlock(&wildfire_irq_lock);
-}
-
-static struct irq_chip wildfire_irq_type = {
-	.name		= "WILDFIRE",
-	.irq_unmask	= wildfire_enable_irq,
-	.irq_mask	= wildfire_disable_irq,
-	.irq_mask_ack	= wildfire_mask_and_ack_irq,
-};
-
-static void __init
-wildfire_init_irq_per_pca(int qbbno, int pcano)
-{
-	int i, irq_bias;
-	static struct irqaction isa_enable = {
-		.handler	= no_action,
-		.name		= "isa_enable",
-	};
-
-	irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
-		 + pcano * WILDFIRE_IRQ_PER_PCA;
-
-#if 0
-	unsigned long io_bias;
-
-	/* Only need the following for first PCI bus per PCA. */
-	io_bias = WILDFIRE_IO(qbbno, pcano<<1) - WILDFIRE_IO_BIAS;
-
-	outb(0, DMA1_RESET_REG + io_bias);
-	outb(0, DMA2_RESET_REG + io_bias);
-	outb(DMA_MODE_CASCADE, DMA2_MODE_REG + io_bias);
-	outb(0, DMA2_MASK_REG + io_bias);
-#endif
-
-#if 0
-	/* ??? Not sure how to do this, yet... */
-	init_i8259a_irqs(); /* ??? */
-#endif
-
-	for (i = 0; i < 16; ++i) {
-		if (i == 2)
-			continue;
-		irq_set_chip_and_handler(i + irq_bias, &wildfire_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
-	}
-
-	irq_set_chip_and_handler(36 + irq_bias, &wildfire_irq_type,
-				 handle_level_irq);
-	irq_set_status_flags(36 + irq_bias, IRQ_LEVEL);
-	for (i = 40; i < 64; ++i) {
-		irq_set_chip_and_handler(i + irq_bias, &wildfire_irq_type,
-					 handle_level_irq);
-		irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
-	}
-
-	setup_irq(32+irq_bias, &isa_enable);
-}
-
-static void __init
-wildfire_init_irq(void)
-{
-	int qbbno, pcano;
-
-#if 1
-	wildfire_init_irq_hw();
-	init_i8259a_irqs();
-#endif
-
-	for (qbbno = 0; qbbno < WILDFIRE_MAX_QBB; qbbno++) {
-	  if (WILDFIRE_QBB_EXISTS(qbbno)) {
-	    for (pcano = 0; pcano < WILDFIRE_PCA_PER_QBB; pcano++) {
-	      if (WILDFIRE_PCA_EXISTS(qbbno, pcano)) {
-		wildfire_init_irq_per_pca(qbbno, pcano);
-	      }
-	    }
-	  }
-	}
-}
-
-static void 
-wildfire_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	irq = (vector - 0x800) >> 4;
-
-	/*
-	 * bits 10-8:	source QBB ID
-	 * bits 7-6:	PCA
-	 * bits 5-0:	irq in PCA
-	 */
-
-	handle_irq(irq);
-	return;
-}
-
-/*
- * PCI Fixup configuration.
- *
- * Summary per PCA (2 PCI or HIPPI buses):
- *
- * Bit      Meaning
- * 0-15     ISA
- *
- *32        ISA summary
- *33        SMI
- *34        NMI
- *36        builtin QLogic SCSI (or slot 0 if no IO module)
- *40        Interrupt Line A from slot 2 PCI0
- *41        Interrupt Line B from slot 2 PCI0
- *42        Interrupt Line C from slot 2 PCI0
- *43        Interrupt Line D from slot 2 PCI0
- *44        Interrupt Line A from slot 3 PCI0
- *45        Interrupt Line B from slot 3 PCI0
- *46        Interrupt Line C from slot 3 PCI0
- *47        Interrupt Line D from slot 3 PCI0
- *
- *48        Interrupt Line A from slot 4 PCI1
- *49        Interrupt Line B from slot 4 PCI1
- *50        Interrupt Line C from slot 4 PCI1
- *51        Interrupt Line D from slot 4 PCI1
- *52        Interrupt Line A from slot 5 PCI1
- *53        Interrupt Line B from slot 5 PCI1
- *54        Interrupt Line C from slot 5 PCI1
- *55        Interrupt Line D from slot 5 PCI1
- *56        Interrupt Line A from slot 6 PCI1
- *57        Interrupt Line B from slot 6 PCI1
- *58        Interrupt Line C from slot 6 PCI1
- *50        Interrupt Line D from slot 6 PCI1
- *60        Interrupt Line A from slot 7 PCI1
- *61        Interrupt Line B from slot 7 PCI1
- *62        Interrupt Line C from slot 7 PCI1
- *63        Interrupt Line D from slot 7 PCI1
- * 
- *
- * IdSel	
- *   0	 Cypress Bridge I/O (ISA summary interrupt)
- *   1	 64 bit PCI 0 option slot 1 (SCSI QLogic builtin)
- *   2	 64 bit PCI 0 option slot 2
- *   3	 64 bit PCI 0 option slot 3
- *   4	 64 bit PCI 1 option slot 4
- *   5	 64 bit PCI 1 option slot 5
- *   6	 64 bit PCI 1 option slot 6
- *   7	 64 bit PCI 1 option slot 7
- */
-
-static int __init
-wildfire_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[8][5] __initdata = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{ -1,    -1,    -1,    -1,    -1}, /* IdSel 0 ISA Bridge */
-		{ 36,    36,    36+1, 36+2, 36+3}, /* IdSel 1 SCSI builtin */
-		{ 40,    40,    40+1, 40+2, 40+3}, /* IdSel 2 PCI 0 slot 2 */
-		{ 44,    44,    44+1, 44+2, 44+3}, /* IdSel 3 PCI 0 slot 3 */
-		{ 48,    48,    48+1, 48+2, 48+3}, /* IdSel 4 PCI 1 slot 4 */
-		{ 52,    52,    52+1, 52+2, 52+3}, /* IdSel 5 PCI 1 slot 5 */
-		{ 56,    56,    56+1, 56+2, 56+3}, /* IdSel 6 PCI 1 slot 6 */
-		{ 60,    60,    60+1, 60+2, 60+3}, /* IdSel 7 PCI 1 slot 7 */
-	};
-	long min_idsel = 0, max_idsel = 7, irqs_per_slot = 5;
-
-	struct pci_controller *hose = dev->sysdata;
-	int irq = COMMON_TABLE_LOOKUP;
-
-	if (irq > 0) {
-		int qbbno = hose->index >> 3;
-		int pcano = (hose->index >> 1) & 3;
-		irq += (qbbno << 8) + (pcano << 6);
-	}
-	return irq;
-}
-
-
-/*
- * The System Vectors
- */
-
-struct alpha_machine_vector wildfire_mv __initmv = {
-	.vector_name		= "WILDFIRE",
-	DO_EV6_MMU,
-	DO_DEFAULT_RTC,
-	DO_WILDFIRE_IO,
-	.machine_check		= wildfire_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= DEFAULT_MEM_BASE,
-
-	.nr_irqs		= WILDFIRE_NR_IRQS,
-	.device_interrupt	= wildfire_device_interrupt,
-
-	.init_arch		= wildfire_init_arch,
-	.init_irq		= wildfire_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= wildfire_kill_arch,
-	.pci_map_irq		= wildfire_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.pa_to_nid		= wildfire_pa_to_nid,
-	.cpuid_to_nid		= wildfire_cpuid_to_nid,
-	.node_mem_start		= wildfire_node_mem_start,
-	.node_mem_size		= wildfire_node_mem_size,
-};
-ALIAS_MV(wildfire)
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/systbls.S b/ANDROID_3.4.5/arch/alpha/kernel/systbls.S
deleted file mode 100644
index e534e1c5..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/systbls.S
+++ /dev/null
@@ -1,532 +0,0 @@
-/*
- * arch/alpha/kernel/systbls.S
- *
- * The system call table. 
- */
-
-#include <asm/unistd.h>
-
-	.data
-	.align 3
-	.globl sys_call_table
-sys_call_table:
-	.quad alpha_ni_syscall			/* 0 */
-	.quad sys_exit
-	.quad sys_fork
-	.quad sys_read
-	.quad sys_write
-	.quad alpha_ni_syscall			/* 5 */
-	.quad sys_close
-	.quad sys_osf_wait4
-	.quad alpha_ni_syscall
-	.quad sys_link
-	.quad sys_unlink			/* 10 */
-	.quad alpha_ni_syscall
-	.quad sys_chdir
-	.quad sys_fchdir
-	.quad sys_mknod
-	.quad sys_chmod				/* 15 */
-	.quad sys_chown
-	.quad sys_osf_brk
-	.quad alpha_ni_syscall
-	.quad sys_lseek
-	.quad sys_getxpid			/* 20 */
-	.quad sys_osf_mount
-	.quad sys_umount
-	.quad sys_setuid
-	.quad sys_getxuid
-	.quad alpha_ni_syscall			/* 25 */
-	.quad sys_ptrace
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 30 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_access
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 35 */
-	.quad sys_sync
-	.quad sys_kill
-	.quad alpha_ni_syscall
-	.quad sys_setpgid
-	.quad alpha_ni_syscall			/* 40 */
-	.quad sys_dup
-	.quad sys_alpha_pipe
-	.quad sys_osf_set_program_attributes
-	.quad alpha_ni_syscall
-	.quad sys_open				/* 45 */
-	.quad alpha_ni_syscall
-	.quad sys_getxgid
-	.quad sys_osf_sigprocmask
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 50 */
-	.quad sys_acct
-	.quad sys_sigpending
-	.quad alpha_ni_syscall
-	.quad sys_ioctl
-	.quad alpha_ni_syscall			/* 55 */
-	.quad alpha_ni_syscall
-	.quad sys_symlink
-	.quad sys_readlink
-	.quad sys_execve
-	.quad sys_umask				/* 60 */
-	.quad sys_chroot
-	.quad alpha_ni_syscall
-	.quad sys_getpgrp
-	.quad sys_getpagesize
-	.quad alpha_ni_syscall			/* 65 */
-	.quad sys_vfork
-	.quad sys_newstat
-	.quad sys_newlstat
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 70 */
-	.quad sys_osf_mmap
-	.quad alpha_ni_syscall
-	.quad sys_munmap
-	.quad sys_mprotect
-	.quad sys_madvise			/* 75 */
-	.quad sys_vhangup
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_getgroups
-	/* map BSD's setpgrp to sys_setpgid for binary compatibility: */
-	.quad sys_setgroups			/* 80 */
-	.quad alpha_ni_syscall
-	.quad sys_setpgid
-	.quad sys_osf_setitimer
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 85 */
-	.quad sys_osf_getitimer
-	.quad sys_gethostname
-	.quad sys_sethostname
-	.quad sys_getdtablesize
-	.quad sys_dup2				/* 90 */
-	.quad sys_newfstat
-	.quad sys_fcntl
-	.quad sys_osf_select
-	.quad sys_poll
-	.quad sys_fsync				/* 95 */
-	.quad sys_setpriority
-	.quad sys_socket
-	.quad sys_connect
-	.quad sys_accept
-	.quad osf_getpriority			/* 100 */
-	.quad sys_send
-	.quad sys_recv
-	.quad sys_sigreturn
-	.quad sys_bind
-	.quad sys_setsockopt			/* 105 */
-	.quad sys_listen
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 110 */
-	.quad sys_sigsuspend
-	.quad sys_osf_sigstack
-	.quad sys_recvmsg
-	.quad sys_sendmsg
-	.quad alpha_ni_syscall			/* 115 */
-	.quad sys_osf_gettimeofday
-	.quad sys_osf_getrusage
-	.quad sys_getsockopt
-	.quad alpha_ni_syscall
-#ifdef CONFIG_OSF4_COMPAT
-	.quad sys_osf_readv			/* 120 */
-	.quad sys_osf_writev
-#else
-	.quad sys_readv				/* 120 */
-	.quad sys_writev
-#endif
-	.quad sys_osf_settimeofday
-	.quad sys_fchown
-	.quad sys_fchmod
-	.quad sys_recvfrom			/* 125 */
-	.quad sys_setreuid
-	.quad sys_setregid
-	.quad sys_rename
-	.quad sys_truncate
-	.quad sys_ftruncate			/* 130 */
-	.quad sys_flock
-	.quad sys_setgid
-	.quad sys_sendto
-	.quad sys_shutdown
-	.quad sys_socketpair			/* 135 */
-	.quad sys_mkdir
-	.quad sys_rmdir
-	.quad sys_osf_utimes
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 140 */
-	.quad sys_getpeername
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_getrlimit
-	.quad sys_setrlimit			/* 145 */
-	.quad alpha_ni_syscall
-	.quad sys_setsid
-	.quad sys_quotactl
-	.quad alpha_ni_syscall
-	.quad sys_getsockname			/* 150 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 155 */
-	.quad sys_osf_sigaction
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_osf_getdirentries
-	.quad sys_osf_statfs			/* 160 */
-	.quad sys_osf_fstatfs
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_osf_getdomainname		/* 165 */
-	.quad sys_setdomainname
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 170 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 175 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 180 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 185 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 190 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 195 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	/* The OSF swapon has two extra arguments, but we ignore them.  */
-	.quad sys_swapon
-	.quad sys_msgctl			/* 200 */
-	.quad sys_msgget
-	.quad sys_msgrcv
-	.quad sys_msgsnd
-	.quad sys_semctl
-	.quad sys_semget			/* 205 */
-	.quad sys_semop
-	.quad sys_osf_utsname
-	.quad sys_lchown
-	.quad sys_shmat
-	.quad sys_shmctl			/* 210 */
-	.quad sys_shmdt
-	.quad sys_shmget
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 215 */
-	.quad alpha_ni_syscall
-	.quad sys_msync
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 220 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 225 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 230 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_getpgid
-	.quad sys_getsid
-	.quad sys_sigaltstack			/* 235 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 240 */
-	.quad sys_osf_sysinfo
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_osf_proplist_syscall
-	.quad alpha_ni_syscall			/* 245 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 250 */
-	.quad sys_osf_usleep_thread
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad sys_sysfs
-	.quad alpha_ni_syscall			/* 255 */
-	.quad sys_osf_getsysinfo
-	.quad sys_osf_setsysinfo
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 260 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 265 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 270 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 275 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 280 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 285 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 290 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall			/* 295 */
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-	.quad alpha_ni_syscall
-/* linux-specific system calls start at 300 */
-	.quad sys_bdflush			/* 300 */
-	.quad sys_sethae
-	.quad sys_mount
-	.quad sys_old_adjtimex
-	.quad sys_swapoff
-	.quad sys_getdents			/* 305 */
-	.quad sys_ni_syscall			/* 306: old create_module */
-	.quad sys_init_module
-	.quad sys_delete_module
-	.quad sys_ni_syscall			/* 309: old get_kernel_syms */
-	.quad sys_syslog			/* 310 */
-	.quad sys_reboot
-	.quad sys_clone
-	.quad sys_uselib
-	.quad sys_mlock
-	.quad sys_munlock			/* 315 */
-	.quad sys_mlockall
-	.quad sys_munlockall
-	.quad sys_sysinfo
-	.quad sys_sysctl
-	.quad sys_ni_syscall			/* 320 */
-	.quad sys_oldumount
-	.quad sys_swapon
-	.quad sys_times
-	.quad sys_personality
-	.quad sys_setfsuid			/* 325 */
-	.quad sys_setfsgid
-	.quad sys_ustat
-	.quad sys_statfs
-	.quad sys_fstatfs
-	.quad sys_sched_setparam		/* 330 */
-	.quad sys_sched_getparam
-	.quad sys_sched_setscheduler
-	.quad sys_sched_getscheduler
-	.quad sys_sched_yield
-	.quad sys_sched_get_priority_max	/* 335 */
-	.quad sys_sched_get_priority_min
-	.quad sys_sched_rr_get_interval
-	.quad sys_ni_syscall			/* sys_afs_syscall */
-	.quad sys_newuname
-	.quad sys_nanosleep			/* 340 */
-	.quad sys_mremap
-	.quad sys_ni_syscall			/* old nfsservctl */
-	.quad sys_setresuid
-	.quad sys_getresuid
-	.quad sys_pciconfig_read		/* 345 */
-	.quad sys_pciconfig_write
-	.quad sys_ni_syscall			/* 347: old query_module */
-	.quad sys_prctl
-	.quad sys_pread64
-	.quad sys_pwrite64			/* 350 */
-	.quad sys_rt_sigreturn
-	.quad sys_rt_sigaction
-	.quad sys_rt_sigprocmask
-	.quad sys_rt_sigpending
-	.quad sys_rt_sigtimedwait		/* 355 */
-	.quad sys_rt_sigqueueinfo
-	.quad sys_rt_sigsuspend
-	.quad sys_select
-	.quad sys_gettimeofday
-	.quad sys_settimeofday			/* 360 */
-	.quad sys_getitimer
-	.quad sys_setitimer
-	.quad sys_utimes
-	.quad sys_getrusage
-	.quad sys_wait4				/* 365 */
-	.quad sys_adjtimex
-	.quad sys_getcwd
-	.quad sys_capget
-	.quad sys_capset
-	.quad sys_sendfile64			/* 370 */
-	.quad sys_setresgid
-	.quad sys_getresgid
-	.quad sys_ni_syscall			/* sys_dipc */
-	.quad sys_pivot_root
-	.quad sys_mincore			/* 375 */
-	.quad sys_pciconfig_iobase
-	.quad sys_getdents64
-	.quad sys_gettid
-	.quad sys_readahead
-	.quad sys_ni_syscall			/* 380 */
-	.quad sys_tkill
-	.quad sys_setxattr
-	.quad sys_lsetxattr
-	.quad sys_fsetxattr
-	.quad sys_getxattr			/* 385 */
-	.quad sys_lgetxattr
-	.quad sys_fgetxattr
-	.quad sys_listxattr
-	.quad sys_llistxattr
-	.quad sys_flistxattr			/* 390 */
-	.quad sys_removexattr
-	.quad sys_lremovexattr
-	.quad sys_fremovexattr
-	.quad sys_futex
-	.quad sys_sched_setaffinity		/* 395 */
-	.quad sys_sched_getaffinity
-	.quad sys_ni_syscall			/* 397, tux */
-	.quad sys_io_setup
-	.quad sys_io_destroy
-	.quad sys_io_getevents			/* 400 */
-	.quad sys_io_submit
-	.quad sys_io_cancel
-	.quad sys_ni_syscall			/* 403, sys_alloc_hugepages */
-	.quad sys_ni_syscall			/* 404, sys_free_hugepages */
-	.quad sys_exit_group			/* 405 */
-	.quad sys_lookup_dcookie
-	.quad sys_epoll_create
-	.quad sys_epoll_ctl
-	.quad sys_epoll_wait
-	.quad sys_remap_file_pages		/* 410 */
-	.quad sys_set_tid_address
-	.quad sys_restart_syscall
-	.quad sys_fadvise64
-	.quad sys_timer_create
-	.quad sys_timer_settime			/* 415 */
-	.quad sys_timer_gettime
-	.quad sys_timer_getoverrun
-	.quad sys_timer_delete
-	.quad sys_clock_settime
-	.quad sys_clock_gettime			/* 420 */
-	.quad sys_clock_getres
-	.quad sys_clock_nanosleep
-	.quad sys_semtimedop
-	.quad sys_tgkill
-	.quad sys_stat64			/* 425 */
-	.quad sys_lstat64
-	.quad sys_fstat64
-	.quad sys_ni_syscall			/* sys_vserver */
-	.quad sys_ni_syscall			/* sys_mbind */
-	.quad sys_ni_syscall			/* sys_get_mempolicy */
-	.quad sys_ni_syscall			/* sys_set_mempolicy */
-	.quad sys_mq_open
-	.quad sys_mq_unlink
-	.quad sys_mq_timedsend
-	.quad sys_mq_timedreceive		/* 435 */
-	.quad sys_mq_notify
-	.quad sys_mq_getsetattr
-	.quad sys_waitid
-	.quad sys_add_key
-	.quad sys_request_key			/* 440 */
-	.quad sys_keyctl
-	.quad sys_ioprio_set
-	.quad sys_ioprio_get
-	.quad sys_inotify_init
-	.quad sys_inotify_add_watch		/* 445 */
-	.quad sys_inotify_rm_watch
-	.quad sys_fdatasync
-	.quad sys_kexec_load
-	.quad sys_migrate_pages
-	.quad sys_openat			/* 450 */
-	.quad sys_mkdirat
-	.quad sys_mknodat
-	.quad sys_fchownat
-	.quad sys_futimesat
-	.quad sys_fstatat64			/* 455 */
-	.quad sys_unlinkat
-	.quad sys_renameat
-	.quad sys_linkat
-	.quad sys_symlinkat
-	.quad sys_readlinkat			/* 460 */
-	.quad sys_fchmodat
-	.quad sys_faccessat
-	.quad sys_pselect6
-	.quad sys_ppoll
-	.quad sys_unshare			/* 465 */
-	.quad sys_set_robust_list
-	.quad sys_get_robust_list
-	.quad sys_splice
-	.quad sys_sync_file_range
-	.quad sys_tee				/* 470 */
-	.quad sys_vmsplice
-	.quad sys_move_pages
-	.quad sys_getcpu
-	.quad sys_epoll_pwait
-	.quad sys_utimensat			/* 475 */
-	.quad sys_signalfd
-	.quad sys_ni_syscall			/* sys_timerfd */
-	.quad sys_eventfd
-	.quad sys_recvmmsg
-	.quad sys_fallocate			/* 480 */
-	.quad sys_timerfd_create
-	.quad sys_timerfd_settime
-	.quad sys_timerfd_gettime
-	.quad sys_signalfd4
-	.quad sys_eventfd2			/* 485 */
-	.quad sys_epoll_create1
-	.quad sys_dup3
-	.quad sys_pipe2
-	.quad sys_inotify_init1
-	.quad sys_preadv			/* 490 */
-	.quad sys_pwritev
-	.quad sys_rt_tgsigqueueinfo
-	.quad sys_perf_event_open
-	.quad sys_fanotify_init
-	.quad sys_fanotify_mark			/* 495 */
-	.quad sys_prlimit64
-	.quad sys_name_to_handle_at
-	.quad sys_open_by_handle_at
-	.quad sys_clock_adjtime
-	.quad sys_syncfs			/* 500 */
-	.quad sys_setns
-	.quad sys_accept4
-	.quad sys_sendmmsg
-
-	.size sys_call_table, . - sys_call_table
-	.type sys_call_table, @object
-
-/* Remember to update everything, kids.  */
-.ifne (. - sys_call_table) - (NR_SYSCALLS * 8)
-.err
-.endif
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/time.c b/ANDROID_3.4.5/arch/alpha/kernel/time.c
deleted file mode 100644
index e336694c..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/time.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/*
- *  linux/arch/alpha/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
- *
- * This file contains the PC-specific time handling details:
- * reading the RTC at bootup, etc..
- * 1994-07-02    Alan Modra
- *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
- * 1995-03-26    Markus Kuhn
- *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
- *      precision CMOS clock update
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- * 1997-01-09    Adrian Sun
- *      use interval timer if CONFIG_RTC=y
- * 1997-10-29    John Bowman (bowman@math.ualberta.ca)
- *      fixed tick loss calculation in timer_interrupt
- *      (round system clock to nearest tick instead of truncating)
- *      fixed algorithm in time_init for getting time from CMOS clock
- * 1999-04-16	Thorsten Kranzkowski (dl8bcu@gmx.net)
- *	fixed algorithm in do_gettimeofday() for calculating the precise time
- *	from processor cycle counter (now taking lost_ticks into account)
- * 2000-08-13	Jan-Benedict Glaw <jbglaw@lug-owl.de>
- * 	Fixed time_init to be aware of epoches != 1900. This prevents
- * 	booting up in 2048 for me;) Code is stolen from rtc.c.
- * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
- *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
- */
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/bcd.h>
-#include <linux/profile.h>
-#include <linux/irq_work.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/hwrpb.h>
-#include <asm/rtc.h>
-
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clocksource.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-
-static int set_rtc_mmss(unsigned long);
-
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-/*
- * Shift amount by which scaled_ticks_per_cycle is scaled.  Shifting
- * by 48 gives us 16 bits for HZ while keeping the accuracy good even
- * for large CPU clock rates.
- */
-#define FIX_SHIFT	48
-
-/* lump static variables together for more efficient access: */
-static struct {
-	/* cycle counter last time it got invoked */
-	__u32 last_time;
-	/* ticks/cycle * 2^48 */
-	unsigned long scaled_ticks_per_cycle;
-	/* partial unused tick */
-	unsigned long partial_tick;
-} state;
-
-unsigned long est_cycle_freq;
-
-#ifdef CONFIG_IRQ_WORK
-
-DEFINE_PER_CPU(u8, irq_work_pending);
-
-#define set_irq_work_pending_flag()  __get_cpu_var(irq_work_pending) = 1
-#define test_irq_work_pending()      __get_cpu_var(irq_work_pending)
-#define clear_irq_work_pending()     __get_cpu_var(irq_work_pending) = 0
-
-void arch_irq_work_raise(void)
-{
-	set_irq_work_pending_flag();
-}
-
-#else  /* CONFIG_IRQ_WORK */
-
-#define test_irq_work_pending()      0
-#define clear_irq_work_pending()
-
-#endif /* CONFIG_IRQ_WORK */
-
-
-static inline __u32 rpcc(void)
-{
-    __u32 result;
-    asm volatile ("rpcc %0" : "=r"(result));
-    return result;
-}
-
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	unsigned int year, mon, day, hour, min, sec, epoch;
-
-	sec = CMOS_READ(RTC_SECONDS);
-	min = CMOS_READ(RTC_MINUTES);
-	hour = CMOS_READ(RTC_HOURS);
-	day = CMOS_READ(RTC_DAY_OF_MONTH);
-	mon = CMOS_READ(RTC_MONTH);
-	year = CMOS_READ(RTC_YEAR);
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = bcd2bin(sec);
-		min = bcd2bin(min);
-		hour = bcd2bin(hour);
-		day = bcd2bin(day);
-		mon = bcd2bin(mon);
-		year = bcd2bin(year);
-	}
-
-	/* PC-like is standard; used for year >= 70 */
-	epoch = 1900;
-	if (year < 20)
-		epoch = 2000;
-	else if (year >= 20 && year < 48)
-		/* NT epoch */
-		epoch = 1980;
-	else if (year >= 48 && year < 70)
-		/* Digital UNIX epoch */
-		epoch = 1952;
-
-	printk(KERN_INFO "Using epoch = %d\n", epoch);
-
-	if ((year += epoch) < 1970)
-		year += 100;
-
-	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
-	ts->tv_nsec = 0;
-}
-
-
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-irqreturn_t timer_interrupt(int irq, void *dev)
-{
-	unsigned long delta;
-	__u32 now;
-	long nticks;
-
-#ifndef CONFIG_SMP
-	/* Not SMP, do kernel PC profiling here.  */
-	profile_tick(CPU_PROFILING);
-#endif
-
-	/*
-	 * Calculate how many ticks have passed since the last update,
-	 * including any previous partial leftover.  Save any resulting
-	 * fraction for the next pass.
-	 */
-	now = rpcc();
-	delta = now - state.last_time;
-	state.last_time = now;
-	delta = delta * state.scaled_ticks_per_cycle + state.partial_tick;
-	state.partial_tick = delta & ((1UL << FIX_SHIFT) - 1); 
-	nticks = delta >> FIX_SHIFT;
-
-	if (nticks)
-		xtime_update(nticks);
-
-	if (test_irq_work_pending()) {
-		clear_irq_work_pending();
-		irq_work_run();
-	}
-
-#ifndef CONFIG_SMP
-	while (nticks--)
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-
-	return IRQ_HANDLED;
-}
-
-void __init
-common_init_rtc(void)
-{
-	unsigned char x;
-
-	/* Reset periodic interrupt frequency.  */
-	x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
-        /* Test includes known working values on various platforms
-           where 0x26 is wrong; we refuse to change those. */
-	if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
-		printk("Setting RTC_FREQ to 1024 Hz (%x)\n", x);
-		CMOS_WRITE(0x26, RTC_FREQ_SELECT);
-	}
-
-	/* Turn on periodic interrupts.  */
-	x = CMOS_READ(RTC_CONTROL);
-	if (!(x & RTC_PIE)) {
-		printk("Turning on RTC interrupts.\n");
-		x |= RTC_PIE;
-		x &= ~(RTC_AIE | RTC_UIE);
-		CMOS_WRITE(x, RTC_CONTROL);
-	}
-	(void) CMOS_READ(RTC_INTR_FLAGS);
-
-	outb(0x36, 0x43);	/* pit counter 0: system timer */
-	outb(0x00, 0x40);
-	outb(0x00, 0x40);
-
-	outb(0xb6, 0x43);	/* pit counter 2: speaker */
-	outb(0x31, 0x42);
-	outb(0x13, 0x42);
-
-	init_rtc_irq();
-}
-
-unsigned int common_get_rtc_time(struct rtc_time *time)
-{
-	return __get_rtc_time(time);
-}
-
-int common_set_rtc_time(struct rtc_time *time)
-{
-	return __set_rtc_time(time);
-}
-
-/* Validate a computed cycle counter result against the known bounds for
-   the given processor core.  There's too much brokenness in the way of
-   timing hardware for any one method to work everywhere.  :-(
-
-   Return 0 if the result cannot be trusted, otherwise return the argument.  */
-
-static unsigned long __init
-validate_cc_value(unsigned long cc)
-{
-	static struct bounds {
-		unsigned int min, max;
-	} cpu_hz[] __initdata = {
-		[EV3_CPU]    = {   50000000,  200000000 },	/* guess */
-		[EV4_CPU]    = {  100000000,  300000000 },
-		[LCA4_CPU]   = {  100000000,  300000000 },	/* guess */
-		[EV45_CPU]   = {  200000000,  300000000 },
-		[EV5_CPU]    = {  250000000,  433000000 },
-		[EV56_CPU]   = {  333000000,  667000000 },
-		[PCA56_CPU]  = {  400000000,  600000000 },	/* guess */
-		[PCA57_CPU]  = {  500000000,  600000000 },	/* guess */
-		[EV6_CPU]    = {  466000000,  600000000 },
-		[EV67_CPU]   = {  600000000,  750000000 },
-		[EV68AL_CPU] = {  750000000,  940000000 },
-		[EV68CB_CPU] = { 1000000000, 1333333333 },
-		/* None of the following are shipping as of 2001-11-01.  */
-		[EV68CX_CPU] = { 1000000000, 1700000000 },	/* guess */
-		[EV69_CPU]   = { 1000000000, 1700000000 },	/* guess */
-		[EV7_CPU]    = {  800000000, 1400000000 },	/* guess */
-		[EV79_CPU]   = { 1000000000, 2000000000 },	/* guess */
-	};
-
-	/* Allow for some drift in the crystal.  10MHz is more than enough.  */
-	const unsigned int deviation = 10000000;
-
-	struct percpu_struct *cpu;
-	unsigned int index;
-
-	cpu = (struct percpu_struct *)((char*)hwrpb + hwrpb->processor_offset);
-	index = cpu->type & 0xffffffff;
-
-	/* If index out of bounds, no way to validate.  */
-	if (index >= ARRAY_SIZE(cpu_hz))
-		return cc;
-
-	/* If index contains no data, no way to validate.  */
-	if (cpu_hz[index].max == 0)
-		return cc;
-
-	if (cc < cpu_hz[index].min - deviation
-	    || cc > cpu_hz[index].max + deviation)
-		return 0;
-
-	return cc;
-}
-
-
-/*
- * Calibrate CPU clock using legacy 8254 timer/counter. Stolen from
- * arch/i386/time.c.
- */
-
-#define CALIBRATE_LATCH	0xffff
-#define TIMEOUT_COUNT	0x100000
-
-static unsigned long __init
-calibrate_cc_with_pit(void)
-{
-	int cc, count = 0;
-
-	/* Set the Gate high, disable speaker */
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	/*
-	 * Now let's take care of CTC channel 2
-	 *
-	 * Set the Gate high, program CTC channel 2 for mode 0,
-	 * (interrupt on terminal count mode), binary count,
-	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
-	 */
-	outb(0xb0, 0x43);		/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
-
-	cc = rpcc();
-	do {
-		count++;
-	} while ((inb(0x61) & 0x20) == 0 && count < TIMEOUT_COUNT);
-	cc = rpcc() - cc;
-
-	/* Error: ECTCNEVERSET or ECPUTOOFAST.  */
-	if (count <= 1 || count == TIMEOUT_COUNT)
-		return 0;
-
-	return ((long)cc * PIT_TICK_RATE) / (CALIBRATE_LATCH + 1);
-}
-
-/* The Linux interpretation of the CMOS clock register contents:
-   When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-   RTC registers show the second which has precisely just started.
-   Let's hope other operating systems interpret the RTC the same way.  */
-
-static unsigned long __init
-rpcc_after_update_in_progress(void)
-{
-	do { } while (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP));
-	do { } while (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
-
-	return rpcc();
-}
-
-#ifndef CONFIG_SMP
-/* Until and unless we figure out how to get cpu cycle counters
-   in sync and keep them there, we can't use the rpcc.  */
-static cycle_t read_rpcc(struct clocksource *cs)
-{
-	cycle_t ret = (cycle_t)rpcc();
-	return ret;
-}
-
-static struct clocksource clocksource_rpcc = {
-	.name                   = "rpcc",
-	.rating                 = 300,
-	.read                   = read_rpcc,
-	.mask                   = CLOCKSOURCE_MASK(32),
-	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
-};
-
-static inline void register_rpcc_clocksource(long cycle_freq)
-{
-	clocksource_register_hz(&clocksource_rpcc, cycle_freq);
-}
-#else /* !CONFIG_SMP */
-static inline void register_rpcc_clocksource(long cycle_freq)
-{
-}
-#endif /* !CONFIG_SMP */
-
-void __init
-time_init(void)
-{
-	unsigned int cc1, cc2;
-	unsigned long cycle_freq, tolerance;
-	long diff;
-
-	/* Calibrate CPU clock -- attempt #1.  */
-	if (!est_cycle_freq)
-		est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
-
-	cc1 = rpcc();
-
-	/* Calibrate CPU clock -- attempt #2.  */
-	if (!est_cycle_freq) {
-		cc1 = rpcc_after_update_in_progress();
-		cc2 = rpcc_after_update_in_progress();
-		est_cycle_freq = validate_cc_value(cc2 - cc1);
-		cc1 = cc2;
-	}
-
-	cycle_freq = hwrpb->cycle_freq;
-	if (est_cycle_freq) {
-		/* If the given value is within 250 PPM of what we calculated,
-		   accept it.  Otherwise, use what we found.  */
-		tolerance = cycle_freq / 4000;
-		diff = cycle_freq - est_cycle_freq;
-		if (diff < 0)
-			diff = -diff;
-		if ((unsigned long)diff > tolerance) {
-			cycle_freq = est_cycle_freq;
-			printk("HWRPB cycle frequency bogus.  "
-			       "Estimated %lu Hz\n", cycle_freq);
-		} else {
-			est_cycle_freq = 0;
-		}
-	} else if (! validate_cc_value (cycle_freq)) {
-		printk("HWRPB cycle frequency bogus, "
-		       "and unable to estimate a proper value!\n");
-	}
-
-	/* From John Bowman <bowman@math.ualberta.ca>: allow the values
-	   to settle, as the Update-In-Progress bit going low isn't good
-	   enough on some hardware.  2ms is our guess; we haven't found 
-	   bogomips yet, but this is close on a 500Mhz box.  */
-	__delay(1000000);
-
-
-	if (HZ > (1<<16)) {
-		extern void __you_loose (void);
-		__you_loose();
-	}
-
-	register_rpcc_clocksource(cycle_freq);
-
-	state.last_time = cc1;
-	state.scaled_ticks_per_cycle
-		= ((unsigned long) HZ << FIX_SHIFT) / cycle_freq;
-	state.partial_tick = 0L;
-
-	/* Startup the timer source. */
-	alpha_mv.init_rtc();
-}
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you won't notice until after reboot!
- */
-
-
-static int
-set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-
-	/* irq are locally disabled here */
-	spin_lock(&rtc_lock);
-	/* Tell the clock it's being set */
-	save_control = CMOS_READ(RTC_CONTROL);
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	/* Stop and reset prescaler */
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) {
-		/* correct for half hour time zone */
-		real_minutes += 30;
-	}
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
- 		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock(&rtc_lock);
-
-	return retval;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/traps.c b/ANDROID_3.4.5/arch/alpha/kernel/traps.c
deleted file mode 100644
index 80d987c0..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/traps.c
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- * arch/alpha/kernel/traps.c
- *
- * (C) Copyright 1994 Linus Torvalds
- */
-
-/*
- * This file initializes the trap entry points
- */
-
-#include <linux/jiffies.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kallsyms.h>
-#include <linux/ratelimit.h>
-
-#include <asm/gentrap.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
-#include <asm/sysinfo.h>
-#include <asm/hwrpb.h>
-#include <asm/mmu_context.h>
-#include <asm/special_insns.h>
-
-#include "proto.h"
-
-/* Work-around for some SRMs which mishandle opDEC faults.  */
-
-static int opDEC_fix;
-
-static void __cpuinit
-opDEC_check(void)
-{
-	__asm__ __volatile__ (
-	/* Load the address of... */
-	"	br	$16, 1f\n"
-	/* A stub instruction fault handler.  Just add 4 to the
-	   pc and continue.  */
-	"	ldq	$16, 8($sp)\n"
-	"	addq	$16, 4, $16\n"
-	"	stq	$16, 8($sp)\n"
-	"	call_pal %[rti]\n"
-	/* Install the instruction fault handler.  */
-	"1:	lda	$17, 3\n"
-	"	call_pal %[wrent]\n"
-	/* With that in place, the fault from the round-to-minf fp
-	   insn will arrive either at the "lda 4" insn (bad) or one
-	   past that (good).  This places the correct fixup in %0.  */
-	"	lda %[fix], 0\n"
-	"	cvttq/svm $f31,$f31\n"
-	"	lda %[fix], 4"
-	: [fix] "=r" (opDEC_fix)
-	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
-	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
-	if (opDEC_fix)
-		printk("opDEC fixup enabled.\n");
-}
-
-void
-dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
-{
-	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx    %s\n",
-	       regs->pc, regs->r26, regs->ps, print_tainted());
-	print_symbol("pc is at %s\n", regs->pc);
-	print_symbol("ra is at %s\n", regs->r26 );
-	printk("v0 = %016lx  t0 = %016lx  t1 = %016lx\n",
-	       regs->r0, regs->r1, regs->r2);
-	printk("t2 = %016lx  t3 = %016lx  t4 = %016lx\n",
- 	       regs->r3, regs->r4, regs->r5);
-	printk("t5 = %016lx  t6 = %016lx  t7 = %016lx\n",
-	       regs->r6, regs->r7, regs->r8);
-
-	if (r9_15) {
-		printk("s0 = %016lx  s1 = %016lx  s2 = %016lx\n",
-		       r9_15[9], r9_15[10], r9_15[11]);
-		printk("s3 = %016lx  s4 = %016lx  s5 = %016lx\n",
-		       r9_15[12], r9_15[13], r9_15[14]);
-		printk("s6 = %016lx\n", r9_15[15]);
-	}
-
-	printk("a0 = %016lx  a1 = %016lx  a2 = %016lx\n",
-	       regs->r16, regs->r17, regs->r18);
-	printk("a3 = %016lx  a4 = %016lx  a5 = %016lx\n",
- 	       regs->r19, regs->r20, regs->r21);
- 	printk("t8 = %016lx  t9 = %016lx  t10= %016lx\n",
-	       regs->r22, regs->r23, regs->r24);
-	printk("t11= %016lx  pv = %016lx  at = %016lx\n",
-	       regs->r25, regs->r27, regs->r28);
-	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
-#if 0
-__halt();
-#endif
-}
-
-#if 0
-static char * ireg_name[] = {"v0", "t0", "t1", "t2", "t3", "t4", "t5", "t6",
-			   "t7", "s0", "s1", "s2", "s3", "s4", "s5", "s6",
-			   "a0", "a1", "a2", "a3", "a4", "a5", "t8", "t9",
-			   "t10", "t11", "ra", "pv", "at", "gp", "sp", "zero"};
-#endif
-
-static void
-dik_show_code(unsigned int *pc)
-{
-	long i;
-
-	printk("Code:");
-	for (i = -6; i < 2; i++) {
-		unsigned int insn;
-		if (__get_user(insn, (unsigned int __user *)pc + i))
-			break;
-		printk("%c%08x%c", i ? ' ' : '<', insn, i ? ' ' : '>');
-	}
-	printk("\n");
-}
-
-static void
-dik_show_trace(unsigned long *sp)
-{
-	long i = 0;
-	printk("Trace:\n");
-	while (0x1ff8 & (unsigned long) sp) {
-		extern char _stext[], _etext[];
-		unsigned long tmp = *sp;
-		sp++;
-		if (tmp < (unsigned long) &_stext)
-			continue;
-		if (tmp >= (unsigned long) &_etext)
-			continue;
-		printk("[<%lx>]", tmp);
-		print_symbol(" %s", tmp);
-		printk("\n");
-		if (i > 40) {
-			printk(" ...");
-			break;
-		}
-	}
-	printk("\n");
-}
-
-static int kstack_depth_to_print = 24;
-
-void show_stack(struct task_struct *task, unsigned long *sp)
-{
-	unsigned long *stack;
-	int i;
-
-	/*
-	 * debugging aid: "show_stack(NULL);" prints the
-	 * back trace for this cpu.
-	 */
-	if(sp==NULL)
-		sp=(unsigned long*)&sp;
-
-	stack = sp;
-	for(i=0; i < kstack_depth_to_print; i++) {
-		if (((long) stack & (THREAD_SIZE-1)) == 0)
-			break;
-		if (i && ((i % 4) == 0))
-			printk("\n       ");
-		printk("%016lx ", *stack++);
-	}
-	printk("\n");
-	dik_show_trace(sp);
-}
-
-void dump_stack(void)
-{
-	show_stack(NULL, NULL);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-void
-die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
-{
-	if (regs->ps & 8)
-		return;
-#ifdef CONFIG_SMP
-	printk("CPU %d ", hard_smp_processor_id());
-#endif
-	printk("%s(%d): %s %ld\n", current->comm, task_pid_nr(current), str, err);
-	dik_show_regs(regs, r9_15);
-	add_taint(TAINT_DIE);
-	dik_show_trace((unsigned long *)(regs+1));
-	dik_show_code((unsigned int *)regs->pc);
-
-	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
-		printk("die_if_kernel recursion detected.\n");
-		local_irq_enable();
-		while (1);
-	}
-	do_exit(SIGSEGV);
-}
-
-#ifndef CONFIG_MATHEMU
-static long dummy_emul(void) { return 0; }
-long (*alpha_fp_emul_imprecise)(struct pt_regs *regs, unsigned long writemask)
-  = (void *)dummy_emul;
-long (*alpha_fp_emul) (unsigned long pc)
-  = (void *)dummy_emul;
-#else
-long alpha_fp_emul_imprecise(struct pt_regs *regs, unsigned long writemask);
-long alpha_fp_emul (unsigned long pc);
-#endif
-
-asmlinkage void
-do_entArith(unsigned long summary, unsigned long write_mask,
-	    struct pt_regs *regs)
-{
-	long si_code = FPE_FLTINV;
-	siginfo_t info;
-
-	if (summary & 1) {
-		/* Software-completion summary bit is set, so try to
-		   emulate the instruction.  If the processor supports
-		   precise exceptions, we don't have to search.  */
-		if (!amask(AMASK_PRECISE_TRAP))
-			si_code = alpha_fp_emul(regs->pc - 4);
-		else
-			si_code = alpha_fp_emul_imprecise(regs, write_mask);
-		if (si_code == 0)
-			return;
-	}
-	die_if_kernel("Arithmetic fault", regs, 0, NULL);
-
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = si_code;
-	info.si_addr = (void __user *) regs->pc;
-	send_sig_info(SIGFPE, &info, current);
-}
-
-asmlinkage void
-do_entIF(unsigned long type, struct pt_regs *regs)
-{
-	siginfo_t info;
-	int signo, code;
-
-	if ((regs->ps & ~IPL_MAX) == 0) {
-		if (type == 1) {
-			const unsigned int *data
-			  = (const unsigned int *) regs->pc;
-			printk("Kernel bug at %s:%d\n",
-			       (const char *)(data[1] | (long)data[2] << 32), 
-			       data[0]);
-		}
-		die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"),
-			      regs, type, NULL);
-	}
-
-	switch (type) {
-	      case 0: /* breakpoint */
-		info.si_signo = SIGTRAP;
-		info.si_errno = 0;
-		info.si_code = TRAP_BRKPT;
-		info.si_trapno = 0;
-		info.si_addr = (void __user *) regs->pc;
-
-		if (ptrace_cancel_bpt(current)) {
-			regs->pc -= 4;	/* make pc point to former bpt */
-		}
-
-		send_sig_info(SIGTRAP, &info, current);
-		return;
-
-	      case 1: /* bugcheck */
-		info.si_signo = SIGTRAP;
-		info.si_errno = 0;
-		info.si_code = __SI_FAULT;
-		info.si_addr = (void __user *) regs->pc;
-		info.si_trapno = 0;
-		send_sig_info(SIGTRAP, &info, current);
-		return;
-		
-	      case 2: /* gentrap */
-		info.si_addr = (void __user *) regs->pc;
-		info.si_trapno = regs->r16;
-		switch ((long) regs->r16) {
-		case GEN_INTOVF:
-			signo = SIGFPE;
-			code = FPE_INTOVF;
-			break;
-		case GEN_INTDIV:
-			signo = SIGFPE;
-			code = FPE_INTDIV;
-			break;
-		case GEN_FLTOVF:
-			signo = SIGFPE;
-			code = FPE_FLTOVF;
-			break;
-		case GEN_FLTDIV:
-			signo = SIGFPE;
-			code = FPE_FLTDIV;
-			break;
-		case GEN_FLTUND:
-			signo = SIGFPE;
-			code = FPE_FLTUND;
-			break;
-		case GEN_FLTINV:
-			signo = SIGFPE;
-			code = FPE_FLTINV;
-			break;
-		case GEN_FLTINE:
-			signo = SIGFPE;
-			code = FPE_FLTRES;
-			break;
-		case GEN_ROPRAND:
-			signo = SIGFPE;
-			code = __SI_FAULT;
-			break;
-
-		case GEN_DECOVF:
-		case GEN_DECDIV:
-		case GEN_DECINV:
-		case GEN_ASSERTERR:
-		case GEN_NULPTRERR:
-		case GEN_STKOVF:
-		case GEN_STRLENERR:
-		case GEN_SUBSTRERR:
-		case GEN_RANGERR:
-		case GEN_SUBRNG:
-		case GEN_SUBRNG1:
-		case GEN_SUBRNG2:
-		case GEN_SUBRNG3:
-		case GEN_SUBRNG4:
-		case GEN_SUBRNG5:
-		case GEN_SUBRNG6:
-		case GEN_SUBRNG7:
-		default:
-			signo = SIGTRAP;
-			code = __SI_FAULT;
-			break;
-		}
-
-		info.si_signo = signo;
-		info.si_errno = 0;
-		info.si_code = code;
-		info.si_addr = (void __user *) regs->pc;
-		send_sig_info(signo, &info, current);
-		return;
-
-	      case 4: /* opDEC */
-		if (implver() == IMPLVER_EV4) {
-			long si_code;
-
-			/* The some versions of SRM do not handle
-			   the opDEC properly - they return the PC of the
-			   opDEC fault, not the instruction after as the
-			   Alpha architecture requires.  Here we fix it up.
-			   We do this by intentionally causing an opDEC
-			   fault during the boot sequence and testing if
-			   we get the correct PC.  If not, we set a flag
-			   to correct it every time through.  */
-			regs->pc += opDEC_fix; 
-			
-			/* EV4 does not implement anything except normal
-			   rounding.  Everything else will come here as
-			   an illegal instruction.  Emulate them.  */
-			si_code = alpha_fp_emul(regs->pc - 4);
-			if (si_code == 0)
-				return;
-			if (si_code > 0) {
-				info.si_signo = SIGFPE;
-				info.si_errno = 0;
-				info.si_code = si_code;
-				info.si_addr = (void __user *) regs->pc;
-				send_sig_info(SIGFPE, &info, current);
-				return;
-			}
-		}
-		break;
-
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
-	      case 5: /* illoc */
-	      default: /* unexpected instruction-fault type */
-		      ;
-	}
-
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code = ILL_ILLOPC;
-	info.si_addr = (void __user *) regs->pc;
-	send_sig_info(SIGILL, &info, current);
-}
-
-/* There is an ifdef in the PALcode in MILO that enables a 
-   "kernel debugging entry point" as an unprivileged call_pal.
-
-   We don't want to have anything to do with it, but unfortunately
-   several versions of MILO included in distributions have it enabled,
-   and if we don't put something on the entry point we'll oops.  */
-
-asmlinkage void
-do_entDbg(struct pt_regs *regs)
-{
-	siginfo_t info;
-
-	die_if_kernel("Instruction fault", regs, 0, NULL);
-
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code = ILL_ILLOPC;
-	info.si_addr = (void __user *) regs->pc;
-	force_sig_info(SIGILL, &info, current);
-}
-
-
-/*
- * entUna has a different register layout to be reasonably simple. It
- * needs access to all the integer registers (the kernel doesn't use
- * fp-regs), and it needs to have them in order for simpler access.
- *
- * Due to the non-standard register layout (and because we don't want
- * to handle floating-point regs), user-mode unaligned accesses are
- * handled separately by do_entUnaUser below.
- *
- * Oh, btw, we don't handle the "gp" register correctly, but if we fault
- * on a gp-register unaligned load/store, something is _very_ wrong
- * in the kernel anyway..
- */
-struct allregs {
-	unsigned long regs[32];
-	unsigned long ps, pc, gp, a0, a1, a2;
-};
-
-struct unaligned_stat {
-	unsigned long count, va, pc;
-} unaligned[2];
-
-
-/* Macro for exception fixup code to access integer registers.  */
-#define una_reg(r)  (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
-
-
-asmlinkage void
-do_entUna(void * va, unsigned long opcode, unsigned long reg,
-	  struct allregs *regs)
-{
-	long error, tmp1, tmp2, tmp3, tmp4;
-	unsigned long pc = regs->pc - 4;
-	unsigned long *_regs = regs->regs;
-	const struct exception_table_entry *fixup;
-
-	unaligned[0].count++;
-	unaligned[0].va = (unsigned long) va;
-	unaligned[0].pc = pc;
-
-	/* We don't want to use the generic get/put unaligned macros as
-	   we want to trap exceptions.  Only if we actually get an
-	   exception will we decide whether we should have caught it.  */
-
-	switch (opcode) {
-	case 0x0c: /* ldwu */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,1(%3)\n"
-		"	extwl %1,%3,%1\n"
-		"	extwh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto got_exception;
-		una_reg(reg) = tmp1|tmp2;
-		return;
-
-	case 0x28: /* ldl */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,3(%3)\n"
-		"	extll %1,%3,%1\n"
-		"	extlh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto got_exception;
-		una_reg(reg) = (int)(tmp1|tmp2);
-		return;
-
-	case 0x29: /* ldq */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,7(%3)\n"
-		"	extql %1,%3,%1\n"
-		"	extqh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto got_exception;
-		una_reg(reg) = tmp1|tmp2;
-		return;
-
-	/* Note that the store sequences do not indicate that they change
-	   memory because it _should_ be affecting nothing in this context.
-	   (Otherwise we have other, much larger, problems.)  */
-	case 0x0d: /* stw */
-		__asm__ __volatile__(
-		"1:	ldq_u %2,1(%5)\n"
-		"2:	ldq_u %1,0(%5)\n"
-		"	inswh %6,%5,%4\n"
-		"	inswl %6,%5,%3\n"
-		"	mskwh %2,%5,%2\n"
-		"	mskwl %1,%5,%1\n"
-		"	or %2,%4,%2\n"
-		"	or %1,%3,%1\n"
-		"3:	stq_u %2,1(%5)\n"
-		"4:	stq_u %1,0(%5)\n"
-		"5:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %2,5b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %1,5b-2b(%0)\n"
-		"	.long 3b - .\n"
-		"	lda $31,5b-3b(%0)\n"
-		"	.long 4b - .\n"
-		"	lda $31,5b-4b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
-			  "=&r"(tmp3), "=&r"(tmp4)
-			: "r"(va), "r"(una_reg(reg)), "0"(0));
-		if (error)
-			goto got_exception;
-		return;
-
-	case 0x2c: /* stl */
-		__asm__ __volatile__(
-		"1:	ldq_u %2,3(%5)\n"
-		"2:	ldq_u %1,0(%5)\n"
-		"	inslh %6,%5,%4\n"
-		"	insll %6,%5,%3\n"
-		"	msklh %2,%5,%2\n"
-		"	mskll %1,%5,%1\n"
-		"	or %2,%4,%2\n"
-		"	or %1,%3,%1\n"
-		"3:	stq_u %2,3(%5)\n"
-		"4:	stq_u %1,0(%5)\n"
-		"5:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %2,5b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %1,5b-2b(%0)\n"
-		"	.long 3b - .\n"
-		"	lda $31,5b-3b(%0)\n"
-		"	.long 4b - .\n"
-		"	lda $31,5b-4b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
-			  "=&r"(tmp3), "=&r"(tmp4)
-			: "r"(va), "r"(una_reg(reg)), "0"(0));
-		if (error)
-			goto got_exception;
-		return;
-
-	case 0x2d: /* stq */
-		__asm__ __volatile__(
-		"1:	ldq_u %2,7(%5)\n"
-		"2:	ldq_u %1,0(%5)\n"
-		"	insqh %6,%5,%4\n"
-		"	insql %6,%5,%3\n"
-		"	mskqh %2,%5,%2\n"
-		"	mskql %1,%5,%1\n"
-		"	or %2,%4,%2\n"
-		"	or %1,%3,%1\n"
-		"3:	stq_u %2,7(%5)\n"
-		"4:	stq_u %1,0(%5)\n"
-		"5:\n"
-		".section __ex_table,\"a\"\n\t"
-		"	.long 1b - .\n"
-		"	lda %2,5b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %1,5b-2b(%0)\n"
-		"	.long 3b - .\n"
-		"	lda $31,5b-3b(%0)\n"
-		"	.long 4b - .\n"
-		"	lda $31,5b-4b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
-			  "=&r"(tmp3), "=&r"(tmp4)
-			: "r"(va), "r"(una_reg(reg)), "0"(0));
-		if (error)
-			goto got_exception;
-		return;
-	}
-
-	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
-		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
-
-got_exception:
-	/* Ok, we caught the exception, but we don't want it.  Is there
-	   someone to pass it along to?  */
-	if ((fixup = search_exception_tables(pc)) != 0) {
-		unsigned long newpc;
-		newpc = fixup_exception(una_reg, fixup, pc);
-
-		printk("Forwarding unaligned exception at %lx (%lx)\n",
-		       pc, newpc);
-
-		regs->pc = newpc;
-		return;
-	}
-
-	/*
-	 * Yikes!  No one to forward the exception to.
-	 * Since the registers are in a weird format, dump them ourselves.
- 	 */
-
-	printk("%s(%d): unhandled unaligned exception\n",
-	       current->comm, task_pid_nr(current));
-
-	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx\n",
-	       pc, una_reg(26), regs->ps);
-	printk("r0 = %016lx  r1 = %016lx  r2 = %016lx\n",
-	       una_reg(0), una_reg(1), una_reg(2));
-	printk("r3 = %016lx  r4 = %016lx  r5 = %016lx\n",
- 	       una_reg(3), una_reg(4), una_reg(5));
-	printk("r6 = %016lx  r7 = %016lx  r8 = %016lx\n",
-	       una_reg(6), una_reg(7), una_reg(8));
-	printk("r9 = %016lx  r10= %016lx  r11= %016lx\n",
-	       una_reg(9), una_reg(10), una_reg(11));
-	printk("r12= %016lx  r13= %016lx  r14= %016lx\n",
-	       una_reg(12), una_reg(13), una_reg(14));
-	printk("r15= %016lx\n", una_reg(15));
-	printk("r16= %016lx  r17= %016lx  r18= %016lx\n",
-	       una_reg(16), una_reg(17), una_reg(18));
-	printk("r19= %016lx  r20= %016lx  r21= %016lx\n",
- 	       una_reg(19), una_reg(20), una_reg(21));
- 	printk("r22= %016lx  r23= %016lx  r24= %016lx\n",
-	       una_reg(22), una_reg(23), una_reg(24));
-	printk("r25= %016lx  r27= %016lx  r28= %016lx\n",
-	       una_reg(25), una_reg(27), una_reg(28));
-	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
-
-	dik_show_code((unsigned int *)pc);
-	dik_show_trace((unsigned long *)(regs+1));
-
-	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
-		printk("die_if_kernel recursion detected.\n");
-		local_irq_enable();
-		while (1);
-	}
-	do_exit(SIGSEGV);
-}
-
-/*
- * Convert an s-floating point value in memory format to the
- * corresponding value in register format.  The exponent
- * needs to be remapped to preserve non-finite values
- * (infinities, not-a-numbers, denormals).
- */
-static inline unsigned long
-s_mem_to_reg (unsigned long s_mem)
-{
-	unsigned long frac    = (s_mem >>  0) & 0x7fffff;
-	unsigned long sign    = (s_mem >> 31) & 0x1;
-	unsigned long exp_msb = (s_mem >> 30) & 0x1;
-	unsigned long exp_low = (s_mem >> 23) & 0x7f;
-	unsigned long exp;
-
-	exp = (exp_msb << 10) | exp_low;	/* common case */
-	if (exp_msb) {
-		if (exp_low == 0x7f) {
-			exp = 0x7ff;
-		}
-	} else {
-		if (exp_low == 0x00) {
-			exp = 0x000;
-		} else {
-			exp |= (0x7 << 7);
-		}
-	}
-	return (sign << 63) | (exp << 52) | (frac << 29);
-}
-
-/*
- * Convert an s-floating point value in register format to the
- * corresponding value in memory format.
- */
-static inline unsigned long
-s_reg_to_mem (unsigned long s_reg)
-{
-	return ((s_reg >> 62) << 30) | ((s_reg << 5) >> 34);
-}
-
-/*
- * Handle user-level unaligned fault.  Handling user-level unaligned
- * faults is *extremely* slow and produces nasty messages.  A user
- * program *should* fix unaligned faults ASAP.
- *
- * Notice that we have (almost) the regular kernel stack layout here,
- * so finding the appropriate registers is a little more difficult
- * than in the kernel case.
- *
- * Finally, we handle regular integer load/stores only.  In
- * particular, load-linked/store-conditionally and floating point
- * load/stores are not supported.  The former make no sense with
- * unaligned faults (they are guaranteed to fail) and I don't think
- * the latter will occur in any decent program.
- *
- * Sigh. We *do* have to handle some FP operations, because GCC will
- * uses them as temporary storage for integer memory to memory copies.
- * However, we need to deal with stt/ldt and sts/lds only.
- */
-
-#define OP_INT_MASK	( 1L << 0x28 | 1L << 0x2c   /* ldl stl */	\
-			| 1L << 0x29 | 1L << 0x2d   /* ldq stq */	\
-			| 1L << 0x0c | 1L << 0x0d   /* ldwu stw */	\
-			| 1L << 0x0a | 1L << 0x0e ) /* ldbu stb */
-
-#define OP_WRITE_MASK	( 1L << 0x26 | 1L << 0x27   /* sts stt */	\
-			| 1L << 0x2c | 1L << 0x2d   /* stl stq */	\
-			| 1L << 0x0d | 1L << 0x0e ) /* stw stb */
-
-#define R(x)	((size_t) &((struct pt_regs *)0)->x)
-
-static int unauser_reg_offsets[32] = {
-	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
-	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
-	R(r16), R(r17), R(r18),
-	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
-	R(r27), R(r28), R(gp),
-	0, 0
-};
-
-#undef R
-
-asmlinkage void
-do_entUnaUser(void __user * va, unsigned long opcode,
-	      unsigned long reg, struct pt_regs *regs)
-{
-	static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
-
-	unsigned long tmp1, tmp2, tmp3, tmp4;
-	unsigned long fake_reg, *reg_addr = &fake_reg;
-	siginfo_t info;
-	long error;
-
-	/* Check the UAC bits to decide what the user wants us to do
-	   with the unaliged access.  */
-
-	if (!test_thread_flag (TIF_UAC_NOPRINT)) {
-		if (__ratelimit(&ratelimit)) {
-			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
-			       current->comm, task_pid_nr(current),
-			       regs->pc - 4, va, opcode, reg);
-		}
-	}
-	if (test_thread_flag (TIF_UAC_SIGBUS))
-		goto give_sigbus;
-	/* Not sure why you'd want to use this, but... */
-	if (test_thread_flag (TIF_UAC_NOFIX))
-		return;
-
-	/* Don't bother reading ds in the access check since we already
-	   know that this came from the user.  Also rely on the fact that
-	   the page at TASK_SIZE is unmapped and so can't be touched anyway. */
-	if (!__access_ok((unsigned long)va, 0, USER_DS))
-		goto give_sigsegv;
-
-	++unaligned[1].count;
-	unaligned[1].va = (unsigned long)va;
-	unaligned[1].pc = regs->pc - 4;
-
-	if ((1L << opcode) & OP_INT_MASK) {
-		/* it's an integer load/store */
-		if (reg < 30) {
-			reg_addr = (unsigned long *)
-			  ((char *)regs + unauser_reg_offsets[reg]);
-		} else if (reg == 30) {
-			/* usp in PAL regs */
-			fake_reg = rdusp();
-		} else {
-			/* zero "register" */
-			fake_reg = 0;
-		}
-	}
-
-	/* We don't want to use the generic get/put unaligned macros as
-	   we want to trap exceptions.  Only if we actually get an
-	   exception will we decide whether we should have caught it.  */
-
-	switch (opcode) {
-	case 0x0c: /* ldwu */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,1(%3)\n"
-		"	extwl %1,%3,%1\n"
-		"	extwh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		*reg_addr = tmp1|tmp2;
-		break;
-
-	case 0x22: /* lds */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,3(%3)\n"
-		"	extll %1,%3,%1\n"
-		"	extlh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		alpha_write_fp_reg(reg, s_mem_to_reg((int)(tmp1|tmp2)));
-		return;
-
-	case 0x23: /* ldt */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,7(%3)\n"
-		"	extql %1,%3,%1\n"
-		"	extqh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		alpha_write_fp_reg(reg, tmp1|tmp2);
-		return;
-
-	case 0x28: /* ldl */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,3(%3)\n"
-		"	extll %1,%3,%1\n"
-		"	extlh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		*reg_addr = (int)(tmp1|tmp2);
-		break;
-
-	case 0x29: /* ldq */
-		__asm__ __volatile__(
-		"1:	ldq_u %1,0(%3)\n"
-		"2:	ldq_u %2,7(%3)\n"
-		"	extql %1,%3,%1\n"
-		"	extqh %2,%3,%2\n"
-		"3:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %1,3b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %2,3b-2b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
-			: "r"(va), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		*reg_addr = tmp1|tmp2;
-		break;
-
-	/* Note that the store sequences do not indicate that they change
-	   memory because it _should_ be affecting nothing in this context.
-	   (Otherwise we have other, much larger, problems.)  */
-	case 0x0d: /* stw */
-		__asm__ __volatile__(
-		"1:	ldq_u %2,1(%5)\n"
-		"2:	ldq_u %1,0(%5)\n"
-		"	inswh %6,%5,%4\n"
-		"	inswl %6,%5,%3\n"
-		"	mskwh %2,%5,%2\n"
-		"	mskwl %1,%5,%1\n"
-		"	or %2,%4,%2\n"
-		"	or %1,%3,%1\n"
-		"3:	stq_u %2,1(%5)\n"
-		"4:	stq_u %1,0(%5)\n"
-		"5:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %2,5b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %1,5b-2b(%0)\n"
-		"	.long 3b - .\n"
-		"	lda $31,5b-3b(%0)\n"
-		"	.long 4b - .\n"
-		"	lda $31,5b-4b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
-			  "=&r"(tmp3), "=&r"(tmp4)
-			: "r"(va), "r"(*reg_addr), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		return;
-
-	case 0x26: /* sts */
-		fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
-		/* FALLTHRU */
-
-	case 0x2c: /* stl */
-		__asm__ __volatile__(
-		"1:	ldq_u %2,3(%5)\n"
-		"2:	ldq_u %1,0(%5)\n"
-		"	inslh %6,%5,%4\n"
-		"	insll %6,%5,%3\n"
-		"	msklh %2,%5,%2\n"
-		"	mskll %1,%5,%1\n"
-		"	or %2,%4,%2\n"
-		"	or %1,%3,%1\n"
-		"3:	stq_u %2,3(%5)\n"
-		"4:	stq_u %1,0(%5)\n"
-		"5:\n"
-		".section __ex_table,\"a\"\n"
-		"	.long 1b - .\n"
-		"	lda %2,5b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %1,5b-2b(%0)\n"
-		"	.long 3b - .\n"
-		"	lda $31,5b-3b(%0)\n"
-		"	.long 4b - .\n"
-		"	lda $31,5b-4b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
-			  "=&r"(tmp3), "=&r"(tmp4)
-			: "r"(va), "r"(*reg_addr), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		return;
-
-	case 0x27: /* stt */
-		fake_reg = alpha_read_fp_reg(reg);
-		/* FALLTHRU */
-
-	case 0x2d: /* stq */
-		__asm__ __volatile__(
-		"1:	ldq_u %2,7(%5)\n"
-		"2:	ldq_u %1,0(%5)\n"
-		"	insqh %6,%5,%4\n"
-		"	insql %6,%5,%3\n"
-		"	mskqh %2,%5,%2\n"
-		"	mskql %1,%5,%1\n"
-		"	or %2,%4,%2\n"
-		"	or %1,%3,%1\n"
-		"3:	stq_u %2,7(%5)\n"
-		"4:	stq_u %1,0(%5)\n"
-		"5:\n"
-		".section __ex_table,\"a\"\n\t"
-		"	.long 1b - .\n"
-		"	lda %2,5b-1b(%0)\n"
-		"	.long 2b - .\n"
-		"	lda %1,5b-2b(%0)\n"
-		"	.long 3b - .\n"
-		"	lda $31,5b-3b(%0)\n"
-		"	.long 4b - .\n"
-		"	lda $31,5b-4b(%0)\n"
-		".previous"
-			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
-			  "=&r"(tmp3), "=&r"(tmp4)
-			: "r"(va), "r"(*reg_addr), "0"(0));
-		if (error)
-			goto give_sigsegv;
-		return;
-
-	default:
-		/* What instruction were you trying to use, exactly?  */
-		goto give_sigbus;
-	}
-
-	/* Only integer loads should get here; everyone else returns early. */
-	if (reg == 30)
-		wrusp(fake_reg);
-	return;
-
-give_sigsegv:
-	regs->pc -= 4;  /* make pc point to faulting insn */
-	info.si_signo = SIGSEGV;
-	info.si_errno = 0;
-
-	/* We need to replicate some of the logic in mm/fault.c,
-	   since we don't have access to the fault code in the
-	   exception handling return path.  */
-	if (!__access_ok((unsigned long)va, 0, USER_DS))
-		info.si_code = SEGV_ACCERR;
-	else {
-		struct mm_struct *mm = current->mm;
-		down_read(&mm->mmap_sem);
-		if (find_vma(mm, (unsigned long)va))
-			info.si_code = SEGV_ACCERR;
-		else
-			info.si_code = SEGV_MAPERR;
-		up_read(&mm->mmap_sem);
-	}
-	info.si_addr = va;
-	send_sig_info(SIGSEGV, &info, current);
-	return;
-
-give_sigbus:
-	regs->pc -= 4;
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRALN;
-	info.si_addr = va;
-	send_sig_info(SIGBUS, &info, current);
-	return;
-}
-
-void __cpuinit
-trap_init(void)
-{
-	/* Tell PAL-code what global pointer we want in the kernel.  */
-	register unsigned long gptr __asm__("$29");
-	wrkgp(gptr);
-
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
-
-	wrent(entArith, 1);
-	wrent(entMM, 2);
-	wrent(entIF, 3);
-	wrent(entUna, 4);
-	wrent(entSys, 5);
-	wrent(entDbg, 6);
-}
diff --git a/ANDROID_3.4.5/arch/alpha/kernel/vmlinux.lds.S b/ANDROID_3.4.5/arch/alpha/kernel/vmlinux.lds.S
deleted file mode 100644
index 647b84c1..00000000
--- a/ANDROID_3.4.5/arch/alpha/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,77 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-OUTPUT_FORMAT("elf64-alpha")
-OUTPUT_ARCH(alpha)
-ENTRY(__start)
-PHDRS { kernel PT_LOAD; note PT_NOTE; }
-jiffies = jiffies_64;
-SECTIONS
-{
-#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
-	. = 0xfffffc0000310000;
-#else
-	. = 0xfffffc0001010000;
-#endif
-
-	_text = .;	/* Text and read-only data */
-	.text : {
-		HEAD_TEXT
-		TEXT_TEXT
-		SCHED_TEXT
-		LOCK_TEXT
-		*(.fixup)
-		*(.gnu.warning)
-	} :kernel
-	swapper_pg_dir = SWAPPER_PGD;
-	_etext = .;	/* End of text section */
-
-	NOTES :kernel :note
-	.dummy : {
-		*(.dummy)
-	} :kernel
-
-	RODATA
-	EXCEPTION_TABLE(16)
-
-	/* Will be freed after init */
-	__init_begin = ALIGN(PAGE_SIZE);
-	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
-	PERCPU_SECTION(L1_CACHE_BYTES)
-	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
-	   needed for the THREAD_SIZE aligned init_task gets freed after init */
-	. = ALIGN(THREAD_SIZE);
-	__init_end = .;
-	/* Freed after init ends here */
-
-	_sdata = .;	/* Start of rw data section */
-	_data = .;
-	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-
-	.got : {
-		*(.got)
-	}
-	.sdata : {
-		*(.sdata)
-	}
-	_edata = .;	/* End of data section */
-
-	BSS_SECTION(0, 0, 0)
-	_end = .;
-
-	.mdebug 0 : {
-		*(.mdebug)
-	}
-	.note 0 : {
-		*(.note)
-	}
-
-	STABS_DEBUG
-	DWARF_DEBUG
-
-	DISCARDS
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/Makefile b/ANDROID_3.4.5/arch/alpha/lib/Makefile
deleted file mode 100644
index c0a83ab6..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-#
-# Makefile for alpha-specific library files..
-#
-
-asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
-
-# Many of these routines have implementations tuned for ev6.
-# Choose them iff we're targeting ev6 specifically.
-ev6-$(CONFIG_ALPHA_EV6) := ev6-
-
-# Several make use of the cttz instruction introduced in ev67.
-ev67-$(CONFIG_ALPHA_EV67) := ev67-
-
-lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
-	udelay.o \
-	$(ev6-y)memset.o \
-	$(ev6-y)memcpy.o \
-	memmove.o \
-	checksum.o \
-	csum_partial_copy.o \
-	$(ev67-y)strlen.o \
-	$(ev67-y)strcat.o \
-	strcpy.o \
-	$(ev67-y)strncat.o \
-	strncpy.o \
-	$(ev6-y)stxcpy.o \
-	$(ev6-y)stxncpy.o \
-	$(ev67-y)strchr.o \
-	$(ev67-y)strrchr.o \
-	$(ev6-y)memchr.o \
-	$(ev6-y)copy_user.o \
-	$(ev6-y)clear_user.o \
-	$(ev6-y)strncpy_from_user.o \
-	$(ev67-y)strlen_user.o \
-	$(ev6-y)csum_ipv6_magic.o \
-	$(ev6-y)clear_page.o \
-	$(ev6-y)copy_page.o \
-	fpreg.o \
-	callback_srm.o srm_puts.o srm_printk.o \
-	fls.o
-
-lib-$(CONFIG_SMP) += dec_and_lock.o
-
-# The division routines are built from single source, with different defines.
-AFLAGS___divqu.o = -DDIV
-AFLAGS___remqu.o =       -DREM
-AFLAGS___divlu.o = -DDIV       -DINTSIZE
-AFLAGS___remlu.o =       -DREM -DINTSIZE
-
-$(obj)/__divqu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
-$(obj)/__remqu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
-$(obj)/__divlu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
-$(obj)/__remlu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
diff --git a/ANDROID_3.4.5/arch/alpha/lib/callback_srm.S b/ANDROID_3.4.5/arch/alpha/lib/callback_srm.S
deleted file mode 100644
index 8804bec2..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/callback_srm.S
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *	arch/alpha/lib/callback_srm.S
- */
-
-#include <asm/console.h>
-
-.text
-#define HWRPB_CRB_OFFSET 0xc0
-
-#if defined(CONFIG_ALPHA_SRM) || defined(CONFIG_ALPHA_GENERIC)
-.align 4
-srm_dispatch:
-#if defined(CONFIG_ALPHA_GENERIC)
-	ldl	$4,alpha_using_srm
-	beq	$4,nosrm
-#endif
-	ldq	$0,hwrpb	# gp is set up by CALLBACK macro.
-	ldl	$25,0($25)	# Pick up the wrapper data.
-	mov	$20,$21		# Shift arguments right.
-	mov	$19,$20
-	ldq	$1,HWRPB_CRB_OFFSET($0)
-	mov	$18,$19
-	mov	$17,$18
-	mov	$16,$17
-	addq	$0,$1,$2	# CRB address
-	ldq	$27,0($2)	# DISPATCH procedure descriptor (VMS call std)
-	extwl	$25,0,$16	# SRM callback function code
-	ldq	$3,8($27)	# call address
-	extwl	$25,2,$25	# argument information (VMS calling std)
-	jmp	($3)		# Return directly to caller of wrapper.
-
-.align 4
-.globl	srm_fixup
-.ent	srm_fixup
-srm_fixup:
-	ldgp	$29,0($27)
-#if defined(CONFIG_ALPHA_GENERIC)
-	ldl	$4,alpha_using_srm
-	beq	$4,nosrm
-#endif
-	ldq	$0,hwrpb
-	ldq	$1,HWRPB_CRB_OFFSET($0)
-	addq	$0,$1,$2	# CRB address
-	ldq	$27,16($2)	# VA of FIXUP procedure descriptor
-	ldq	$3,8($27)	# call address
-	lda	$25,2($31)	# two integer arguments
-	jmp	($3)		# Return directly to caller of srm_fixup.
-.end    srm_fixup
-
-#if defined(CONFIG_ALPHA_GENERIC)
-.align 3
-nosrm:
-	lda	$0,-1($31)
-	ret
-#endif
-
-#define CALLBACK(NAME, CODE, ARG_CNT) \
-.align 4; .globl callback_##NAME; .ent callback_##NAME; callback_##NAME##: \
-ldgp $29,0($27); br $25,srm_dispatch; .word CODE, ARG_CNT; .end callback_##NAME
-
-#else /* defined(CONFIG_ALPHA_SRM) || defined(CONFIG_ALPHA_GENERIC) */
-
-#define CALLBACK(NAME, CODE, ARG_CNT) \
-.align 3; .globl callback_##NAME; .ent callback_##NAME; callback_##NAME##: \
-lda $0,-1($31); ret; .end callback_##NAME
-
-.align 3
-.globl	srm_fixup
-.ent	srm_fixup
-srm_fixup:
-	lda	$0,-1($31)
-	ret
-.end	srm_fixup
-#endif /* defined(CONFIG_ALPHA_SRM) || defined(CONFIG_ALPHA_GENERIC) */
-
-CALLBACK(puts, CCB_PUTS, 4)
-CALLBACK(open, CCB_OPEN, 3)
-CALLBACK(close, CCB_CLOSE, 2)
-CALLBACK(read, CCB_READ, 5)
-CALLBACK(open_console, CCB_OPEN_CONSOLE, 1)
-CALLBACK(close_console, CCB_CLOSE_CONSOLE, 1)
-CALLBACK(getenv, CCB_GET_ENV, 4)
-CALLBACK(setenv, CCB_SET_ENV, 4)
-CALLBACK(getc, CCB_GETC, 2)
-CALLBACK(reset_term, CCB_RESET_TERM, 2)
-CALLBACK(term_int, CCB_SET_TERM_INT, 3)
-CALLBACK(term_ctl, CCB_SET_TERM_CTL, 3)
-CALLBACK(process_keycode, CCB_PROCESS_KEYCODE, 3)
-CALLBACK(ioctl, CCB_IOCTL, 6)
-CALLBACK(write, CCB_WRITE, 5)
-CALLBACK(reset_env, CCB_RESET_ENV, 4)
-CALLBACK(save_env, CCB_SAVE_ENV, 1)
-CALLBACK(pswitch, CCB_PSWITCH, 3)
-CALLBACK(bios_emul, CCB_BIOS_EMUL, 5)
-	
-.data
-__alpha_using_srm:		# For use by bootpheader
-	.long 7			# value is not 1 for link debugging
-	.weak alpha_using_srm; alpha_using_srm = __alpha_using_srm
-__callback_init_done:		# For use by bootpheader
-	.long 7			# value is not 1 for link debugging
-	.weak callback_init_done; callback_init_done = __callback_init_done
-
diff --git a/ANDROID_3.4.5/arch/alpha/lib/checksum.c b/ANDROID_3.4.5/arch/alpha/lib/checksum.c
deleted file mode 100644
index 199f6efa..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/checksum.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * arch/alpha/lib/checksum.c
- *
- * This file contains network checksum routines that are better done
- * in an architecture-specific manner due to speed..
- * Comments in other versions indicate that the algorithms are from RFC1071
- *
- * accelerated versions (and 21264 assembly versions ) contributed by
- *	Rick Gorton	<rick.gorton@alpha-processor.com>
- */
- 
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from64to16(unsigned long x)
-{
-	/* Using extract instructions is a bit more efficient
-	   than the original shift/bitmask version.  */
-
-	union {
-		unsigned long	ul;
-		unsigned int	ui[2];
-		unsigned short	us[4];
-	} in_v, tmp_v, out_v;
-
-	in_v.ul = x;
-	tmp_v.ul = (unsigned long) in_v.ui[0] + (unsigned long) in_v.ui[1];
-
-	/* Since the bits of tmp_v.sh[3] are going to always be zero,
-	   we don't have to bother to add that in.  */
-	out_v.ul = (unsigned long) tmp_v.us[0] + (unsigned long) tmp_v.us[1]
-			+ (unsigned long) tmp_v.us[2];
-
-	/* Similarly, out_v.us[2] is always zero for the final add.  */
-	return out_v.us[0] + out_v.us[1];
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented.
- */
-__sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-				   unsigned short len,
-				   unsigned short proto,
-				   __wsum sum)
-{
-	return (__force __sum16)~from64to16(
-		(__force u64)saddr + (__force u64)daddr +
-		(__force u64)sum + ((len + proto) << 8));
-}
-
-__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				   unsigned short len,
-				   unsigned short proto,
-				   __wsum sum)
-{
-	unsigned long result;
-
-	result = (__force u64)saddr + (__force u64)daddr +
-		 (__force u64)sum + ((len + proto) << 8);
-
-	/* Fold down to 32-bits so we don't lose in the typedef-less 
-	   network stack.  */
-	/* 64 to 33 */
-	result = (result & 0xffffffff) + (result >> 32);
-	/* 33 to 32 */
-	result = (result & 0xffffffff) + (result >> 32);
-	return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_tcpudp_nofold);
-
-/*
- * Do a 64-bit checksum on an arbitrary memory area..
- *
- * This isn't a great routine, but it's not _horrible_ either. The
- * inner loop could be unrolled a bit further, and there are better
- * ways to do the carry, but this is reasonable.
- */
-static inline unsigned long do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff << 8;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			if (4 & (unsigned long) buff) {
-				result += *(unsigned int *) buff;
-				count--;
-				len -= 4;
-				buff += 4;
-			}
-			count >>= 1;	/* nr of 64-bit words.. */
-			if (count) {
-				unsigned long carry = 0;
-				do {
-					unsigned long w = *(unsigned long *) buff;
-					count--;
-					buff += 8;
-					result += carry;
-					result += w;
-					carry = (w > result);
-				} while (count);
-				result += carry;
-				result = (result & 0xffffffff) + (result >> 32);
-			}
-			if (len & 4) {
-				result += *(unsigned int *) buff;
-				buff += 4;
-			}
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += *buff;
-	result = from64to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned long result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	/* 32+c bits -> 32 bits */
-	result = (result & 0xffffffff) + (result >> 32);
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~from64to16(do_csum(buff,len));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/clear_page.S b/ANDROID_3.4.5/arch/alpha/lib/clear_page.S
deleted file mode 100644
index a221ae26..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/clear_page.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/alpha/lib/clear_page.S
- *
- * Zero an entire page.
- */
-
-	.text
-	.align 4
-	.global clear_page
-	.ent clear_page
-clear_page:
-	.prologue 0
-
-	lda	$0,128
-	nop
-	unop
-	nop
-
-1:	stq	$31,0($16)
-	stq	$31,8($16)
-	stq	$31,16($16)
-	stq	$31,24($16)
-
-	stq	$31,32($16)
-	stq	$31,40($16)
-	stq	$31,48($16)
-	subq	$0,1,$0
-
-	stq	$31,56($16)
-	addq	$16,64,$16
-	unop
-	bne	$0,1b
-
-	ret
-	nop
-	unop
-	nop
-
-	.end clear_page
diff --git a/ANDROID_3.4.5/arch/alpha/lib/clear_user.S b/ANDROID_3.4.5/arch/alpha/lib/clear_user.S
deleted file mode 100644
index 8860316c..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/clear_user.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * arch/alpha/lib/clear_user.S
- * Contributed by Richard Henderson <rth@tamu.edu>
- *
- * Zero user space, handling exceptions as we go.
- *
- * We have to make sure that $0 is always up-to-date and contains the
- * right "bytes left to zero" value (and that it is updated only _after_
- * a successful copy).  There is also some rather minor exception setup
- * stuff.
- *
- * NOTE! This is not directly C-callable, because the calling semantics
- * are different:
- *
- * Inputs:
- *	length in $0
- *	destination address in $6
- *	exception pointer in $7
- *	return address in $28 (exceptions expect it there)
- *
- * Outputs:
- *	bytes left to copy in $0
- *
- * Clobbers:
- *	$1,$2,$3,$4,$5,$6
- */
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($31); 	\
-	.previous
-
-	.set noat
-	.set noreorder
-	.align 4
-
-	.globl __do_clear_user
-	.ent __do_clear_user
-	.frame	$30, 0, $28
-	.prologue 0
-
-$loop:
-	and	$1, 3, $4	# e0    :
-	beq	$4, 1f		# .. e1 :
-
-0:	EX( stq_u $31, 0($6) )	# e0    : zero one word
-	subq	$0, 8, $0	# .. e1 :
-	subq	$4, 1, $4	# e0    :
-	addq	$6, 8, $6	# .. e1 :
-	bne	$4, 0b		# e1    :
-	unop			#       :
-
-1:	bic	$1, 3, $1	# e0    :
-	beq	$1, $tail	# .. e1 :
-
-2:	EX( stq_u $31, 0($6) )	# e0    : zero four words
-	subq	$0, 8, $0	# .. e1 :
-	EX( stq_u $31, 8($6) )	# e0    :
-	subq	$0, 8, $0	# .. e1 :
-	EX( stq_u $31, 16($6) )	# e0    :
-	subq	$0, 8, $0	# .. e1 :
-	EX( stq_u $31, 24($6) )	# e0    :
-	subq	$0, 8, $0	# .. e1 :
-	subq	$1, 4, $1	# e0    :
-	addq	$6, 32, $6	# .. e1 :
-	bne	$1, 2b		# e1    :
-
-$tail:
-	bne	$2, 1f		# e1    : is there a tail to do?
-	ret	$31, ($28), 1	# .. e1 :
-
-1:	EX( ldq_u $5, 0($6) )	# e0    :
-	clr	$0		# .. e1 :
-	nop			# e1    :
-	mskqh	$5, $0, $5	# e0    :
-	EX( stq_u $5, 0($6) )	# e0    :
-	ret	$31, ($28), 1	# .. e1 :
-
-__do_clear_user:
-	and	$6, 7, $4	# e0    : find dest misalignment
-	beq	$0, $zerolength # .. e1 :
-	addq	$0, $4, $1	# e0    : bias counter
-	and	$1, 7, $2	# e1    : number of bytes in tail
-	srl	$1, 3, $1	# e0    :
-	beq	$4, $loop	# .. e1 :
-
-	EX( ldq_u $5, 0($6) )	# e0    : load dst word to mask back in
-	beq	$1, $oneword	# .. e1 : sub-word store?
-
-	mskql	$5, $6, $5	# e0    : take care of misaligned head
-	addq	$6, 8, $6	# .. e1 :
-	EX( stq_u $5, -8($6) )	# e0    :
-	addq	$0, $4, $0	# .. e1 : bytes left -= 8 - misalignment
-	subq	$1, 1, $1	# e0    :
-	subq	$0, 8, $0	# .. e1 :
-	br	$loop		# e1    :
-	unop			#       :
-
-$oneword:
-	mskql	$5, $6, $4	# e0    :
-	mskqh	$5, $2, $5	# e0    :
-	or	$5, $4, $5	# e1    :
-	EX( stq_u $5, 0($6) )	# e0    :
-	clr	$0		# .. e1 :
-
-$zerolength:
-$exception:
-	ret	$31, ($28), 1	# .. e1 :
-
-	.end __do_clear_user
diff --git a/ANDROID_3.4.5/arch/alpha/lib/copy_page.S b/ANDROID_3.4.5/arch/alpha/lib/copy_page.S
deleted file mode 100644
index 9f3b9745..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/copy_page.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/alpha/lib/copy_page.S
- *
- * Copy an entire page.
- */
-
-	.text
-	.align 4
-	.global copy_page
-	.ent copy_page
-copy_page:
-	.prologue 0
-
-	lda	$18,128
-	nop
-	unop
-	nop
-
-1:	ldq	$0,0($17)
-	ldq	$1,8($17)
-	ldq	$2,16($17)
-	ldq	$3,24($17)
-
-	ldq	$4,32($17)
-	ldq	$5,40($17)
-	ldq	$6,48($17)
-	ldq	$7,56($17)
-
-	stq	$0,0($16)
-	subq	$18,1,$18
-	stq	$1,8($16)
-	addq	$17,64,$17
-
-	stq	$2,16($16)
-	stq	$3,24($16)
-	stq	$4,32($16)
-	stq	$5,40($16)
-
-	stq	$6,48($16)
-	stq	$7,56($16)
-	addq	$16,64,$16
-	bne	$18, 1b
-
-	ret
-	nop
-	unop
-	nop
-
-	.end copy_page
diff --git a/ANDROID_3.4.5/arch/alpha/lib/copy_user.S b/ANDROID_3.4.5/arch/alpha/lib/copy_user.S
deleted file mode 100644
index 6f3fab9e..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/copy_user.S
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * arch/alpha/lib/copy_user.S
- *
- * Copy to/from user space, handling exceptions as we go..  This
- * isn't exactly pretty.
- *
- * This is essentially the same as "memcpy()", but with a few twists.
- * Notably, we have to make sure that $0 is always up-to-date and
- * contains the right "bytes left to copy" value (and that it is updated
- * only _after_ a successful copy). There is also some rather minor
- * exception setup stuff..
- *
- * NOTE! This is not directly C-callable, because the calling semantics are
- * different:
- *
- * Inputs:
- *	length in $0
- *	destination address in $6
- *	source address in $7
- *	return address in $28
- *
- * Outputs:
- *	bytes left to copy in $0
- *
- * Clobbers:
- *	$1,$2,$3,$4,$5,$6,$7
- */
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EXI(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exitin-99b($31);	\
-	.previous
-
-#define EXO(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exitout-99b($31);	\
-	.previous
-
-	.set noat
-	.align 4
-	.globl __copy_user
-	.ent __copy_user
-__copy_user:
-	.prologue 0
-	and $6,7,$3
-	beq $0,$35
-	beq $3,$36
-	subq $3,8,$3
-	.align 4
-$37:
-	EXI( ldq_u $1,0($7) )
-	EXO( ldq_u $2,0($6) )
-	extbl $1,$7,$1
-	mskbl $2,$6,$2
-	insbl $1,$6,$1
-	addq $3,1,$3
-	bis $1,$2,$1
-	EXO( stq_u $1,0($6) )
-	subq $0,1,$0
-	addq $6,1,$6
-	addq $7,1,$7
-	beq $0,$41
-	bne $3,$37
-$36:
-	and $7,7,$1
-	bic $0,7,$4
-	beq $1,$43
-	beq $4,$48
-	EXI( ldq_u $3,0($7) )
-	.align 4
-$50:
-	EXI( ldq_u $2,8($7) )
-	subq $4,8,$4
-	extql $3,$7,$3
-	extqh $2,$7,$1
-	bis $3,$1,$1
-	EXO( stq $1,0($6) )
-	addq $7,8,$7
-	subq $0,8,$0
-	addq $6,8,$6
-	bis $2,$2,$3
-	bne $4,$50
-$48:
-	beq $0,$41
-	.align 4
-$57:
-	EXI( ldq_u $1,0($7) )
-	EXO( ldq_u $2,0($6) )
-	extbl $1,$7,$1
-	mskbl $2,$6,$2
-	insbl $1,$6,$1
-	bis $1,$2,$1
-	EXO( stq_u $1,0($6) )
-	subq $0,1,$0
-	addq $6,1,$6
-	addq $7,1,$7
-	bne $0,$57
-	br $31,$41
-	.align 4
-$43:
-	beq $4,$65
-	.align 4
-$66:
-	EXI( ldq $1,0($7) )
-	subq $4,8,$4
-	EXO( stq $1,0($6) )
-	addq $7,8,$7
-	subq $0,8,$0
-	addq $6,8,$6
-	bne $4,$66
-$65:
-	beq $0,$41
-	EXI( ldq $2,0($7) )
-	EXO( ldq $1,0($6) )
-	mskql $2,$0,$2
-	mskqh $1,$0,$1
-	bis $2,$1,$2
-	EXO( stq $2,0($6) )
-	bis $31,$31,$0
-$41:
-$35:
-$exitout:
-	ret $31,($28),1
-
-$exitin:
-	/* A stupid byte-by-byte zeroing of the rest of the output
-	   buffer.  This cures security holes by never leaving 
-	   random kernel data around to be copied elsewhere.  */
-
-	mov $0,$1
-$101:
-	EXO ( ldq_u $2,0($6) )
-	subq $1,1,$1
-	mskbl $2,$6,$2
-	EXO ( stq_u $2,0($6) )
-	addq $6,1,$6
-	bgt $1,$101
-	ret $31,($28),1
-
-	.end __copy_user
diff --git a/ANDROID_3.4.5/arch/alpha/lib/csum_ipv6_magic.S b/ANDROID_3.4.5/arch/alpha/lib/csum_ipv6_magic.S
deleted file mode 100644
index 2c2acb96..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/csum_ipv6_magic.S
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/alpha/lib/csum_ipv6_magic.S
- * Contributed by Richard Henderson <rth@tamu.edu>
- *
- * unsigned short csum_ipv6_magic(struct in6_addr *saddr,
- *                                struct in6_addr *daddr,
- *                                __u32 len,
- *                                unsigned short proto,
- *                                unsigned int csum);
- *
- * Misalignment handling (which costs 16 instructions / 8 cycles)
- * added by Ivan Kokshaysky <ink@jurassic.park.msu.ru>
- */
-
-	.globl csum_ipv6_magic
-	.align 4
-	.ent csum_ipv6_magic
-	.frame $30,0,$26,0
-csum_ipv6_magic:
-	.prologue 0
-
-	ldq_u	$0,0($16)	# e0    : load src & dst addr words
-	zapnot	$20,15,$20	# .. e1 : zero extend incoming csum
-	extqh	$18,1,$4	# e0    : byte swap len & proto while we wait
-	ldq_u	$21,7($16)	# .. e1 : handle misalignment
-
-	extbl	$18,1,$5	# e0	:
-	ldq_u	$1,8($16)	# .. e1 :
-	extbl	$18,2,$6	# e0 	:
-	ldq_u	$22,15($16)	# .. e1 :
-
-	extbl	$18,3,$18	# e0	:
-	ldq_u	$2,0($17)	# .. e1 :
-	sra	$4,32,$4	# e0	:
-	ldq_u	$23,7($17)	# .. e1 :
-
-	extql	$0,$16,$0	# e0	:
-	ldq_u	$3,8($17)	# .. e1 :
-	extqh	$21,$16,$21	# e0	:
-	ldq_u	$24,15($17)	# .. e1 :
-
-	sll	$5,16,$5	# e0	:
-	or	$0,$21,$0	# .. e1 : 1st src word complete
-	extql	$1,$16,$1	# e0	:
-	addq	$20,$0,$20	# .. e1 : begin summing the words
-
-	extqh	$22,$16,$22	# e0	:
-	cmpult	$20,$0,$0	# .. e1 :
-	sll	$6,8,$6		# e0	:
-	or	$1,$22,$1	# .. e1 : 2nd src word complete
-
-	extql	$2,$17,$2	# e0	:
-	or	$4,$18,$18	# .. e1 :
-	extqh	$23,$17,$23	# e0	:
-	or	$5,$6,$5	# .. e1 :
-
-	extql	$3,$17,$3	# e0	:
-	or	$2,$23,$2	# .. e1 : 1st dst word complete
-	extqh	$24,$17,$24	# e0	:
-	or	$18,$5,$18	# .. e1 : len complete
-
-	extwh	$19,7,$7	# e0    :
-	or	$3,$24,$3	# .. e1 : 2nd dst word complete
-	extbl	$19,1,$19	# e0    :
-	addq	$20,$1,$20	# .. e1 :
-
-	or	$19,$7,$19	# e0    :
-	cmpult	$20,$1,$1	# .. e1 :
-	sll	$19,48,$19	# e0    :
-	nop			# .. e0 :
-
-	sra	$19,32,$19	# e0    : proto complete
-	addq	$20,$2,$20	# .. e1 :
-	cmpult	$20,$2,$2	# e0    :
-	addq	$20,$3,$20	# .. e1 :
-
-	cmpult	$20,$3,$3	# e0    :
-	addq	$20,$18,$20	# .. e1 :
-	cmpult	$20,$18,$18	# e0    :
-	addq	$20,$19,$20	# .. e1 :
-
-	cmpult	$20,$19,$19	# e0    :
-	addq	$0,$1,$0	# .. e1 : merge the carries back into the csum
-	addq	$2,$3,$2	# e0    :
-	addq	$18,$19,$18	# .. e1 :
-
-	addq	$0,$2,$0	# e0    :
-	addq	$20,$18,$20	# .. e1 :
-	addq	$0,$20,$0	# e0    :
-	unop			#       :
-
-	extwl	$0,2,$2		# e0    : begin folding the 64-bit value
-	zapnot	$0,3,$3		# .. e1 :
-	extwl	$0,4,$1		# e0    :
-	addq	$2,$3,$3	# .. e1 :
-
-	extwl	$0,6,$0		# e0    :
-	addq	$3,$1,$3	# .. e1 :
-	addq	$0,$3,$0	# e0    :
-	unop			#       :
-
-	extwl	$0,2,$1		# e0    : fold 18-bit value
-	zapnot	$0,3,$0		# .. e1 :
-	addq	$0,$1,$0	# e0    :
-	unop			#       :
-
-	extwl	$0,2,$1		# e0    : fold 17-bit value
-	zapnot	$0,3,$0		# .. e1 :
-	addq	$0,$1,$0	# e0    :
-	not	$0,$0		# .. e1 : and complement.
-
-	zapnot	$0,3,$0		# e0    :
-	ret			# .. e1 :
-
-	.end csum_ipv6_magic
diff --git a/ANDROID_3.4.5/arch/alpha/lib/csum_partial_copy.c b/ANDROID_3.4.5/arch/alpha/lib/csum_partial_copy.c
deleted file mode 100644
index 40736da9..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/csum_partial_copy.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * csum_partial_copy - do IP checksumming and copy
- *
- * (C) Copyright 1996 Linus Torvalds
- * accelerated versions (and 21264 assembly versions ) contributed by
- *	Rick Gorton	<rick.gorton@alpha-processor.com>
- *
- * Don't look at this too closely - you'll go mad. The things
- * we do for performance..
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/uaccess.h>
-
-
-#define ldq_u(x,y) \
-__asm__ __volatile__("ldq_u %0,%1":"=r" (x):"m" (*(const unsigned long *)(y)))
-
-#define stq_u(x,y) \
-__asm__ __volatile__("stq_u %1,%0":"=m" (*(unsigned long *)(y)):"r" (x))
-
-#define extql(x,y,z) \
-__asm__ __volatile__("extql %1,%2,%0":"=r" (z):"r" (x),"r" (y))
-
-#define extqh(x,y,z) \
-__asm__ __volatile__("extqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
-
-#define mskql(x,y,z) \
-__asm__ __volatile__("mskql %1,%2,%0":"=r" (z):"r" (x),"r" (y))
-
-#define mskqh(x,y,z) \
-__asm__ __volatile__("mskqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
-
-#define insql(x,y,z) \
-__asm__ __volatile__("insql %1,%2,%0":"=r" (z):"r" (x),"r" (y))
-
-#define insqh(x,y,z) \
-__asm__ __volatile__("insqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
-
-
-#define __get_user_u(x,ptr)				\
-({							\
-	long __guu_err;					\
-	__asm__ __volatile__(				\
-	"1:	ldq_u %0,%2\n"				\
-	"2:\n"						\
-	".section __ex_table,\"a\"\n"			\
-	"	.long 1b - .\n"				\
-	"	lda %0,2b-1b(%1)\n"			\
-	".previous"					\
-		: "=r"(x), "=r"(__guu_err)		\
-		: "m"(__m(ptr)), "1"(0));		\
-	__guu_err;					\
-})
-
-#define __put_user_u(x,ptr)				\
-({							\
-	long __puu_err;					\
-	__asm__ __volatile__(				\
-	"1:	stq_u %2,%1\n"				\
-	"2:\n"						\
-	".section __ex_table,\"a\"\n"			\
-	"	.long 1b - ."				\
-	"	lda $31,2b-1b(%0)\n"			\
-	".previous"					\
-		: "=r"(__puu_err)			\
-		: "m"(__m(addr)), "rJ"(x), "0"(0));	\
-	__puu_err;					\
-})
-
-
-static inline unsigned short from64to16(unsigned long x)
-{
-	/* Using extract instructions is a bit more efficient
-	   than the original shift/bitmask version.  */
-
-	union {
-		unsigned long	ul;
-		unsigned int	ui[2];
-		unsigned short	us[4];
-	} in_v, tmp_v, out_v;
-
-	in_v.ul = x;
-	tmp_v.ul = (unsigned long) in_v.ui[0] + (unsigned long) in_v.ui[1];
-
-	/* Since the bits of tmp_v.sh[3] are going to always be zero,
-	   we don't have to bother to add that in.  */
-	out_v.ul = (unsigned long) tmp_v.us[0] + (unsigned long) tmp_v.us[1]
-			+ (unsigned long) tmp_v.us[2];
-
-	/* Similarly, out_v.us[2] is always zero for the final add.  */
-	return out_v.us[0] + out_v.us[1];
-}
-
-
-
-/*
- * Ok. This isn't fun, but this is the EASY case.
- */
-static inline unsigned long
-csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
-			 long len, unsigned long checksum,
-			 int *errp)
-{
-	unsigned long carry = 0;
-	int err = 0;
-
-	while (len >= 0) {
-		unsigned long word;
-		err |= __get_user(word, src);
-		checksum += carry;
-		src++;
-		checksum += word;
-		len -= 8;
-		carry = checksum < word;
-		*dst = word;
-		dst++;
-	}
-	len += 8;
-	checksum += carry;
-	if (len) {
-		unsigned long word, tmp;
-		err |= __get_user(word, src);
-		tmp = *dst;
-		mskql(word, len, word);
-		checksum += word;
-		mskqh(tmp, len, tmp);
-		carry = checksum < word;
-		*dst = word | tmp;
-		checksum += carry;
-	}
-	if (err) *errp = err;
-	return checksum;
-}
-
-/*
- * This is even less fun, but this is still reasonably
- * easy.
- */
-static inline unsigned long
-csum_partial_cfu_dest_aligned(const unsigned long __user *src,
-			      unsigned long *dst,
-			      unsigned long soff,
-			      long len, unsigned long checksum,
-			      int *errp)
-{
-	unsigned long first;
-	unsigned long word, carry;
-	unsigned long lastsrc = 7+len+(unsigned long)src;
-	int err = 0;
-
-	err |= __get_user_u(first,src);
-	carry = 0;
-	while (len >= 0) {
-		unsigned long second;
-
-		err |= __get_user_u(second, src+1);
-		extql(first, soff, word);
-		len -= 8;
-		src++;
-		extqh(second, soff, first);
-		checksum += carry;
-		word |= first;
-		first = second;
-		checksum += word;
-		*dst = word;
-		dst++;
-		carry = checksum < word;
-	}
-	len += 8;
-	checksum += carry;
-	if (len) {
-		unsigned long tmp;
-		unsigned long second;
-		err |= __get_user_u(second, lastsrc);
-		tmp = *dst;
-		extql(first, soff, word);
-		extqh(second, soff, first);
-		word |= first;
-		mskql(word, len, word);
-		checksum += word;
-		mskqh(tmp, len, tmp);
-		carry = checksum < word;
-		*dst = word | tmp;
-		checksum += carry;
-	}
-	if (err) *errp = err;
-	return checksum;
-}
-
-/*
- * This is slightly less fun than the above..
- */
-static inline unsigned long
-csum_partial_cfu_src_aligned(const unsigned long __user *src,
-			     unsigned long *dst,
-			     unsigned long doff,
-			     long len, unsigned long checksum,
-			     unsigned long partial_dest,
-			     int *errp)
-{
-	unsigned long carry = 0;
-	unsigned long word;
-	unsigned long second_dest;
-	int err = 0;
-
-	mskql(partial_dest, doff, partial_dest);
-	while (len >= 0) {
-		err |= __get_user(word, src);
-		len -= 8;
-		insql(word, doff, second_dest);
-		checksum += carry;
-		stq_u(partial_dest | second_dest, dst);
-		src++;
-		checksum += word;
-		insqh(word, doff, partial_dest);
-		carry = checksum < word;
-		dst++;
-	}
-	len += 8;
-	if (len) {
-		checksum += carry;
-		err |= __get_user(word, src);
-		mskql(word, len, word);
-		len -= 8;
-		checksum += word;
-		insql(word, doff, second_dest);
-		len += doff;
-		carry = checksum < word;
-		partial_dest |= second_dest;
-		if (len >= 0) {
-			stq_u(partial_dest, dst);
-			if (!len) goto out;
-			dst++;
-			insqh(word, doff, partial_dest);
-		}
-		doff = len;
-	}
-	ldq_u(second_dest, dst);
-	mskqh(second_dest, doff, second_dest);
-	stq_u(partial_dest | second_dest, dst);
-out:
-	checksum += carry;
-	if (err) *errp = err;
-	return checksum;
-}
-
-/*
- * This is so totally un-fun that it's frightening. Don't
- * look at this too closely, you'll go blind.
- */
-static inline unsigned long
-csum_partial_cfu_unaligned(const unsigned long __user * src,
-			   unsigned long * dst,
-			   unsigned long soff, unsigned long doff,
-			   long len, unsigned long checksum,
-			   unsigned long partial_dest,
-			   int *errp)
-{
-	unsigned long carry = 0;
-	unsigned long first;
-	unsigned long lastsrc;
-	int err = 0;
-
-	err |= __get_user_u(first, src);
-	lastsrc = 7+len+(unsigned long)src;
-	mskql(partial_dest, doff, partial_dest);
-	while (len >= 0) {
-		unsigned long second, word;
-		unsigned long second_dest;
-
-		err |= __get_user_u(second, src+1);
-		extql(first, soff, word);
-		checksum += carry;
-		len -= 8;
-		extqh(second, soff, first);
-		src++;
-		word |= first;
-		first = second;
-		insql(word, doff, second_dest);
-		checksum += word;
-		stq_u(partial_dest | second_dest, dst);
-		carry = checksum < word;
-		insqh(word, doff, partial_dest);
-		dst++;
-	}
-	len += doff;
-	checksum += carry;
-	if (len >= 0) {
-		unsigned long second, word;
-		unsigned long second_dest;
-
-		err |= __get_user_u(second, lastsrc);
-		extql(first, soff, word);
-		extqh(second, soff, first);
-		word |= first;
-		first = second;
-		mskql(word, len-doff, word);
-		checksum += word;
-		insql(word, doff, second_dest);
-		carry = checksum < word;
-		stq_u(partial_dest | second_dest, dst);
-		if (len) {
-			ldq_u(second_dest, dst+1);
-			insqh(word, doff, partial_dest);
-			mskqh(second_dest, len, second_dest);
-			stq_u(partial_dest | second_dest, dst+1);
-		}
-		checksum += carry;
-	} else {
-		unsigned long second, word;
-		unsigned long second_dest;
-
-		err |= __get_user_u(second, lastsrc);
-		extql(first, soff, word);
-		extqh(second, soff, first);
-		word |= first;
-		ldq_u(second_dest, dst);
-		mskql(word, len-doff, word);
-		checksum += word;
-		mskqh(second_dest, len, second_dest);
-		carry = checksum < word;
-		insql(word, doff, word);
-		stq_u(partial_dest | word | second_dest, dst);
-		checksum += carry;
-	}
-	if (err) *errp = err;
-	return checksum;
-}
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-			       __wsum sum, int *errp)
-{
-	unsigned long checksum = (__force u32) sum;
-	unsigned long soff = 7 & (unsigned long) src;
-	unsigned long doff = 7 & (unsigned long) dst;
-
-	if (len) {
-		if (!doff) {
-			if (!soff)
-				checksum = csum_partial_cfu_aligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					len-8, checksum, errp);
-			else
-				checksum = csum_partial_cfu_dest_aligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					soff, len-8, checksum, errp);
-		} else {
-			unsigned long partial_dest;
-			ldq_u(partial_dest, dst);
-			if (!soff)
-				checksum = csum_partial_cfu_src_aligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					doff, len-8, checksum,
-					partial_dest, errp);
-			else
-				checksum = csum_partial_cfu_unaligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					soff, doff, len-8, checksum,
-					partial_dest, errp);
-		}
-		checksum = from64to16 (checksum);
-	}
-	return (__force __wsum)checksum;
-}
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
-	return csum_partial_copy_from_user((__force const void __user *)src,
-			dst, len, sum, NULL);
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/dbg_current.S b/ANDROID_3.4.5/arch/alpha/lib/dbg_current.S
deleted file mode 100644
index e6d07101..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/dbg_current.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/alpha/lib/dbg_current.S
- * Contributed by Richard Henderson (rth@cygnus.com)
- *
- * Trap if we find current not correct.
- */
-
-#include <asm/pal.h>
-
-	.text
-	.set noat
-
-	.globl _mcount
-	.ent _mcount
-_mcount:
-	.frame $30, 0, $28, 0
-	.prologue 0
-
-	lda	$0, -0x4000($30)
-	cmpult	$8, $30, $1
-	cmpule	$0, $30, $2
-	and	$1, $2, $3
-	bne	$3, 1f
-
-	call_pal PAL_bugchk
-
-1:	ret	$31, ($28), 1
-
-	.end _mcount
diff --git a/ANDROID_3.4.5/arch/alpha/lib/dbg_stackcheck.S b/ANDROID_3.4.5/arch/alpha/lib/dbg_stackcheck.S
deleted file mode 100644
index 78f6b924..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/dbg_stackcheck.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/alpha/lib/dbg_stackcheck.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Verify that we have not overflowed the stack.  Oops if we have.
- */
-
-#include <asm/asm-offsets.h>
-
-	.text
-	.set noat
-
-	.align 3
-	.globl _mcount
-	.ent _mcount
-_mcount:
-	.frame $30, 0, $28, 0
-	.prologue 0
-
-	lda	$0, TASK_SIZE($8)
-	cmpult	$30, $0, $0
-	bne	$0, 1f
-	ret	($28)
-1:	stq	$31, -8($31)	# oops me, damn it.
-	br	1b
-
-	.end _mcount
diff --git a/ANDROID_3.4.5/arch/alpha/lib/dbg_stackkill.S b/ANDROID_3.4.5/arch/alpha/lib/dbg_stackkill.S
deleted file mode 100644
index c1e40a1a..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/dbg_stackkill.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/alpha/lib/dbg_stackkill.S
- * Contributed by Richard Henderson (rth@cygnus.com)
- *
- * Clobber the balance of the kernel stack, hoping to catch
- * uninitialized local variables in the act.
- */
-
-#include <asm/asm-offsets.h>
-
-	.text
-	.set noat
-
-	.align 5
-	.globl _mcount
-	.ent _mcount
-_mcount:
-	.frame $30, 0, $28, 0
-	.prologue 0
-
-	ldi	$0, 0xdeadbeef
-	lda	$2, -STACK_SIZE
-	sll	$0, 32, $1
-	and	$30, $2, $2
-	or	$0, $1, $0
-	lda	$2, TASK_SIZE($2)
-	cmpult	$2, $30, $1
-	beq	$1, 2f
-1:	stq	$0, 0($2)
-	addq	$2, 8, $2
-	cmpult	$2, $30, $1
-	bne	$1, 1b
-2:	ret	($28)
-
-	.end _mcount
diff --git a/ANDROID_3.4.5/arch/alpha/lib/dec_and_lock.c b/ANDROID_3.4.5/arch/alpha/lib/dec_and_lock.c
deleted file mode 100644
index f9f5fe83..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/dec_and_lock.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/alpha/lib/dec_and_lock.c
- *
- * ll/sc version of atomic_dec_and_lock()
- * 
- */
-
-#include <linux/spinlock.h>
-#include <linux/atomic.h>
-
-  asm (".text					\n\
-	.global _atomic_dec_and_lock		\n\
-	.ent _atomic_dec_and_lock		\n\
-	.align	4				\n\
-_atomic_dec_and_lock:				\n\
-	.prologue 0				\n\
-1:	ldl_l	$1, 0($16)			\n\
-	subl	$1, 1, $1			\n\
-	beq	$1, 2f				\n\
-	stl_c	$1, 0($16)			\n\
-	beq	$1, 4f				\n\
-	mb					\n\
-	clr	$0				\n\
-	ret					\n\
-2:	br	$29, 3f				\n\
-3:	ldgp	$29, 0($29)			\n\
-	br	$atomic_dec_and_lock_1..ng	\n\
-	.subsection 2				\n\
-4:	br	1b				\n\
-	.previous				\n\
-	.end _atomic_dec_and_lock");
-
-static int __used atomic_dec_and_lock_1(atomic_t *atomic, spinlock_t *lock)
-{
-	/* Slow path */
-	spin_lock(lock);
-	if (atomic_dec_and_test(atomic))
-		return 1;
-	spin_unlock(lock);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/divide.S b/ANDROID_3.4.5/arch/alpha/lib/divide.S
deleted file mode 100644
index 2d1a0484..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/divide.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/alpha/lib/divide.S
- *
- * (C) 1995 Linus Torvalds
- *
- * Alpha division..
- */
-
-/*
- * The alpha chip doesn't provide hardware division, so we have to do it
- * by hand.  The compiler expects the functions
- *
- *	__divqu: 64-bit unsigned long divide
- *	__remqu: 64-bit unsigned long remainder
- *	__divqs/__remqs: signed 64-bit
- *	__divlu/__remlu: unsigned 32-bit
- *	__divls/__remls: signed 32-bit
- *
- * These are not normal C functions: instead of the normal
- * calling sequence, these expect their arguments in registers
- * $24 and $25, and return the result in $27. Register $28 may
- * be clobbered (assembly temporary), anything else must be saved. 
- *
- * In short: painful.
- *
- * This is a rather simple bit-at-a-time algorithm: it's very good
- * at dividing random 64-bit numbers, but the more usual case where
- * the divisor is small is handled better by the DEC algorithm
- * using lookup tables. This uses much less memory, though, and is
- * nicer on the cache.. Besides, I don't know the copyright status
- * of the DEC code.
- */
-
-/*
- * My temporaries:
- *	$0 - current bit
- *	$1 - shifted divisor
- *	$2 - modulus/quotient
- *
- *	$23 - return address
- *	$24 - dividend
- *	$25 - divisor
- *
- *	$27 - quotient/modulus
- *	$28 - compare status
- */
-
-#define halt .long 0
-
-/*
- * Select function type and registers
- */
-#define mask	$0
-#define divisor	$1
-#define compare $28
-#define tmp1	$3
-#define tmp2	$4
-
-#ifdef DIV
-#define DIV_ONLY(x,y...) x,##y
-#define MOD_ONLY(x,y...)
-#define func(x) __div##x
-#define modulus $2
-#define quotient $27
-#define GETSIGN(x) xor $24,$25,x
-#define STACK 48
-#else
-#define DIV_ONLY(x,y...)
-#define MOD_ONLY(x,y...) x,##y
-#define func(x) __rem##x
-#define modulus $27
-#define quotient $2
-#define GETSIGN(x) bis $24,$24,x
-#define STACK 32
-#endif
-
-/*
- * For 32-bit operations, we need to extend to 64-bit
- */
-#ifdef INTSIZE
-#define ufunction func(lu)
-#define sfunction func(l)
-#define LONGIFY(x) zapnot x,15,x
-#define SLONGIFY(x) addl x,0,x
-#else
-#define ufunction func(qu)
-#define sfunction func(q)
-#define LONGIFY(x)
-#define SLONGIFY(x)
-#endif
-
-.set noat
-.align	3
-.globl	ufunction
-.ent	ufunction
-ufunction:
-	subq	$30,STACK,$30
-	.frame	$30,STACK,$23
-	.prologue 0
-
-7:	stq	$1, 0($30)
-	bis	$25,$25,divisor
-	stq	$2, 8($30)
-	bis	$24,$24,modulus
-	stq	$0,16($30)
-	bis	$31,$31,quotient
-	LONGIFY(divisor)
-	stq	tmp1,24($30)
-	LONGIFY(modulus)
-	bis	$31,1,mask
-	DIV_ONLY(stq tmp2,32($30))
-	beq	divisor, 9f			/* div by zero */
-
-#ifdef INTSIZE
-	/*
-	 * shift divisor left, using 3-bit shifts for
-	 * 32-bit divides as we can't overflow. Three-bit
-	 * shifts will result in looping three times less
-	 * here, but can result in two loops more later.
-	 * Thus using a large shift isn't worth it (and
-	 * s8add pairs better than a sll..)
-	 */
-1:	cmpult	divisor,modulus,compare
-	s8addq	divisor,$31,divisor
-	s8addq	mask,$31,mask
-	bne	compare,1b
-#else
-1:	cmpult	divisor,modulus,compare
-	blt     divisor, 2f
-	addq	divisor,divisor,divisor
-	addq	mask,mask,mask
-	bne	compare,1b
-	unop
-#endif
-
-	/* ok, start to go right again.. */
-2:	DIV_ONLY(addq quotient,mask,tmp2)
-	srl	mask,1,mask
-	cmpule	divisor,modulus,compare
-	subq	modulus,divisor,tmp1
-	DIV_ONLY(cmovne compare,tmp2,quotient)
-	srl	divisor,1,divisor
-	cmovne	compare,tmp1,modulus
-	bne	mask,2b
-
-9:	ldq	$1, 0($30)
-	ldq	$2, 8($30)
-	ldq	$0,16($30)
-	ldq	tmp1,24($30)
-	DIV_ONLY(ldq tmp2,32($30))
-	addq	$30,STACK,$30
-	ret	$31,($23),1
-	.end	ufunction
-
-/*
- * Uhh.. Ugly signed division. I'd rather not have it at all, but
- * it's needed in some circumstances. There are different ways to
- * handle this, really. This does:
- * 	-a / b = a / -b = -(a / b)
- *	-a % b = -(a % b)
- *	a % -b = a % b
- * which is probably not the best solution, but at least should
- * have the property that (x/y)*y + (x%y) = x.
- */
-.align 3
-.globl	sfunction
-.ent	sfunction
-sfunction:
-	subq	$30,STACK,$30
-	.frame	$30,STACK,$23
-	.prologue 0
-	bis	$24,$25,$28
-	SLONGIFY($28)
-	bge	$28,7b
-	stq	$24,0($30)
-	subq	$31,$24,$28
-	stq	$25,8($30)
-	cmovlt	$24,$28,$24	/* abs($24) */
-	stq	$23,16($30)
-	subq	$31,$25,$28
-	stq	tmp1,24($30)
-	cmovlt	$25,$28,$25	/* abs($25) */
-	unop
-	bsr	$23,ufunction
-	ldq	$24,0($30)
-	ldq	$25,8($30)
-	GETSIGN($28)
-	subq	$31,$27,tmp1
-	SLONGIFY($28)
-	ldq	$23,16($30)
-	cmovlt	$28,tmp1,$27
-	ldq	tmp1,24($30)
-	addq	$30,STACK,$30
-	ret	$31,($23),1
-	.end	sfunction
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-clear_page.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-clear_page.S
deleted file mode 100644
index adf4f7be..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-clear_page.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/alpha/lib/ev6-clear_page.S
- *
- * Zero an entire page.
- */
-
-        .text
-        .align 4
-        .global clear_page
-        .ent clear_page
-clear_page:
-        .prologue 0
-
-	lda	$0,128
-	lda	$1,125
-	addq	$16,64,$2
-	addq	$16,128,$3
-
-	addq	$16,192,$17
-	wh64	($16)
-	wh64	($2)
-	wh64	($3)
-
-1:	wh64	($17)
-	stq	$31,0($16)
-	subq	$0,1,$0
-	subq	$1,1,$1
-
-	stq	$31,8($16)
-	stq	$31,16($16)
-	addq	$17,64,$2
-	nop
-
-	stq	$31,24($16)
-	stq	$31,32($16)
-	cmovgt	$1,$2,$17
-	nop
-
-	stq	$31,40($16)
-	stq	$31,48($16)
-	nop
-	nop
-
-	stq	$31,56($16)
-	addq	$16,64,$16
-	nop
-	bne	$0,1b
-
-	ret
-	nop
-	nop
-	nop
-
-	.end clear_page
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-clear_user.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-clear_user.S
deleted file mode 100644
index 4f42a16b..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-clear_user.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * arch/alpha/lib/ev6-clear_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Zero user space, handling exceptions as we go.
- *
- * We have to make sure that $0 is always up-to-date and contains the
- * right "bytes left to zero" value (and that it is updated only _after_
- * a successful copy).  There is also some rather minor exception setup
- * stuff.
- *
- * NOTE! This is not directly C-callable, because the calling semantics
- * are different:
- *
- * Inputs:
- *	length in $0
- *	destination address in $6
- *	exception pointer in $7
- *	return address in $28 (exceptions expect it there)
- *
- * Outputs:
- *	bytes left to copy in $0
- *
- * Clobbers:
- *	$1,$2,$3,$4,$5,$6
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- * Determining actual stalls (other than slotting) doesn't appear to be easy to do.
- * From perusing the source code context where this routine is called, it is
- * a fair assumption that significant fractions of entire pages are zeroed, so
- * it's going to be worth the effort to hand-unroll a big loop, and use wh64.
- * ASSUMPTION:
- *	The believed purpose of only updating $0 after a store is that a signal
- *	may come along during the execution of this chunk of code, and we don't
- *	want to leave a hole (and we also want to avoid repeating lots of work)
- */
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($31); 	\
-	.previous
-
-	.set noat
-	.set noreorder
-	.align 4
-
-	.globl __do_clear_user
-	.ent __do_clear_user
-	.frame	$30, 0, $28
-	.prologue 0
-
-				# Pipeline info : Slotting & Comments
-__do_clear_user:
-	and	$6, 7, $4	# .. E  .. ..	: find dest head misalignment
-	beq	$0, $zerolength # U  .. .. ..	:  U L U L
-
-	addq	$0, $4, $1	# .. .. .. E	: bias counter
-	and	$1, 7, $2	# .. .. E  ..	: number of misaligned bytes in tail
-# Note - we never actually use $2, so this is a moot computation
-# and we can rewrite this later...
-	srl	$1, 3, $1	# .. E  .. ..	: number of quadwords to clear
-	beq	$4, $headalign	# U  .. .. ..	: U L U L
-
-/*
- * Head is not aligned.  Write (8 - $4) bytes to head of destination
- * This means $6 is known to be misaligned
- */
-	EX( ldq_u $5, 0($6) )	# .. .. .. L	: load dst word to mask back in
-	beq	$1, $onebyte	# .. .. U  ..	: sub-word store?
-	mskql	$5, $6, $5	# .. U  .. ..	: take care of misaligned head
-	addq	$6, 8, $6	# E  .. .. .. 	: L U U L
-
-	EX( stq_u $5, -8($6) )	# .. .. .. L	:
-	subq	$1, 1, $1	# .. .. E  ..	:
-	addq	$0, $4, $0	# .. E  .. ..	: bytes left -= 8 - misalignment
-	subq	$0, 8, $0	# E  .. .. ..	: U L U L
-
-	.align	4
-/*
- * (The .align directive ought to be a moot point)
- * values upon initial entry to the loop
- * $1 is number of quadwords to clear (zero is a valid value)
- * $2 is number of trailing bytes (0..7) ($2 never used...)
- * $6 is known to be aligned 0mod8
- */
-$headalign:
-	subq	$1, 16, $4	# .. .. .. E	: If < 16, we can not use the huge loop
-	and	$6, 0x3f, $2	# .. .. E  ..	: Forward work for huge loop
-	subq	$2, 0x40, $3	# .. E  .. ..	: bias counter (huge loop)
-	blt	$4, $trailquad	# U  .. .. ..	: U L U L
-
-/*
- * We know that we're going to do at least 16 quads, which means we are
- * going to be able to use the large block clear loop at least once.
- * Figure out how many quads we need to clear before we are 0mod64 aligned
- * so we can use the wh64 instruction.
- */
-
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	nop			# .. E  .. ..
-	beq	$3, $bigalign	# U  .. .. ..	: U L U L : Aligned 0mod64
-
-$alignmod64:
-	EX( stq_u $31, 0($6) )	# .. .. .. L
-	addq	$3, 8, $3	# .. .. E  ..
-	subq	$0, 8, $0	# .. E  .. ..
-	nop			# E  .. .. ..	: U L U L
-
-	nop			# .. .. .. E
-	subq	$1, 1, $1	# .. .. E  ..
-	addq	$6, 8, $6	# .. E  .. ..
-	blt	$3, $alignmod64	# U  .. .. ..	: U L U L
-
-$bigalign:
-/*
- * $0 is the number of bytes left
- * $1 is the number of quads left
- * $6 is aligned 0mod64
- * we know that we'll be taking a minimum of one trip through
- * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
- * We are _not_ going to update $0 after every single store.  That
- * would be silly, because there will be cross-cluster dependencies
- * no matter how the code is scheduled.  By doing it in slightly
- * staggered fashion, we can still do this loop in 5 fetches
- * The worse case will be doing two extra quads in some future execution,
- * in the event of an interrupted clear.
- * Assumes the wh64 needs to be for 2 trips through the loop in the future
- * The wh64 is issued on for the starting destination address for trip +2
- * through the loop, and if there are less than two trips left, the target
- * address will be for the current trip.
- */
-	nop			# E :
-	nop			# E :
-	nop			# E :
-	bis	$6,$6,$3	# E : U L U L : Initial wh64 address is dest
-	/* This might actually help for the current trip... */
-
-$do_wh64:
-	wh64	($3)		# .. .. .. L1	: memory subsystem hint
-	subq	$1, 16, $4	# .. .. E  ..	: Forward calculation - repeat the loop?
-	EX( stq_u $31, 0($6) )	# .. L  .. ..
-	subq	$0, 8, $0	# E  .. .. ..	: U L U L
-
-	addq	$6, 128, $3	# E : Target address of wh64
-	EX( stq_u $31, 8($6) )	# L :
-	EX( stq_u $31, 16($6) )	# L :
-	subq	$0, 16, $0	# E : U L L U
-
-	nop			# E :
-	EX( stq_u $31, 24($6) )	# L :
-	EX( stq_u $31, 32($6) )	# L :
-	subq	$0, 168, $5	# E : U L L U : two trips through the loop left?
-	/* 168 = 192 - 24, since we've already completed some stores */
-
-	subq	$0, 16, $0	# E :
-	EX( stq_u $31, 40($6) )	# L :
-	EX( stq_u $31, 48($6) )	# L :
-	cmovlt	$5, $6, $3	# E : U L L U : Latency 2, extra mapping cycle
-
-	subq	$1, 8, $1	# E :
-	subq	$0, 16, $0	# E :
-	EX( stq_u $31, 56($6) )	# L :
-	nop			# E : U L U L
-
-	nop			# E :
-	subq	$0, 8, $0	# E :
-	addq	$6, 64, $6	# E :
-	bge	$4, $do_wh64	# U : U L U L
-
-$trailquad:
-	# zero to 16 quadwords left to store, plus any trailing bytes
-	# $1 is the number of quadwords left to go.
-	# 
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	nop			# .. E  .. ..
-	beq	$1, $trailbytes	# U  .. .. ..	: U L U L : Only 0..7 bytes to go
-
-$onequad:
-	EX( stq_u $31, 0($6) )	# .. .. .. L
-	subq	$1, 1, $1	# .. .. E  ..
-	subq	$0, 8, $0	# .. E  .. ..
-	nop			# E  .. .. ..	: U L U L
-
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	addq	$6, 8, $6	# .. E  .. ..
-	bgt	$1, $onequad	# U  .. .. ..	: U L U L
-
-	# We have an unknown number of bytes left to go.
-$trailbytes:
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	nop			# .. E  .. ..
-	beq	$0, $zerolength	# U  .. .. ..	: U L U L
-
-	# $0 contains the number of bytes left to copy (0..31)
-	# so we will use $0 as the loop counter
-	# We know for a fact that $0 > 0 zero due to previous context
-$onebyte:
-	EX( stb $31, 0($6) )	# .. .. .. L
-	subq	$0, 1, $0	# .. .. E  ..	:
-	addq	$6, 1, $6	# .. E  .. ..	:
-	bgt	$0, $onebyte	# U  .. .. ..	: U L U L
-
-$zerolength:
-$exception:			# Destination for exception recovery(?)
-	nop			# .. .. .. E	:
-	nop			# .. .. E  ..	:
-	nop			# .. E  .. ..	:
-	ret	$31, ($28), 1	# L0 .. .. ..	: L U L U
-	.end __do_clear_user
-
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-copy_page.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-copy_page.S
deleted file mode 100644
index b789db19..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-copy_page.S
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * arch/alpha/lib/ev6-copy_page.S
- *
- * Copy an entire page.
- */
-
-/* The following comparison of this routine vs the normal copy_page.S
-   was written by an unnamed ev6 hardware designer and forwarded to me
-   via Steven Hobbs <hobbs@steven.zko.dec.com>.
- 
-   First Problem: STQ overflows.
-   -----------------------------
-
-	It would be nice if EV6 handled every resource overflow efficiently,
-	but for some it doesn't.  Including store queue overflows.  It causes
-	a trap and a restart of the pipe.
-
-	To get around this we sometimes use (to borrow a term from a VSSAD
-	researcher) "aeration".  The idea is to slow the rate at which the
-	processor receives valid instructions by inserting nops in the fetch
-	path.  In doing so, you can prevent the overflow and actually make
-	the code run faster.  You can, of course, take advantage of the fact
-	that the processor can fetch at most 4 aligned instructions per cycle.
-
-	I inserted enough nops to force it to take 10 cycles to fetch the
-	loop code.  In theory, EV6 should be able to execute this loop in
-	9 cycles but I was not able to get it to run that fast -- the initial
-	conditions were such that I could not reach this optimum rate on
-	(chaotic) EV6.  I wrote the code such that everything would issue
-	in order. 
-
-   Second Problem: Dcache index matches.
-   -------------------------------------
-
-	If you are going to use this routine on random aligned pages, there
-	is a 25% chance that the pages will be at the same dcache indices.
-	This results in many nasty memory traps without care.
-
-	The solution is to schedule the prefetches to avoid the memory
-	conflicts.  I schedule the wh64 prefetches farther ahead of the
-	read prefetches to avoid this problem.
-
-   Third Problem: Needs more prefetching.
-   --------------------------------------
-
-	In order to improve the code I added deeper prefetching to take the
-	most advantage of EV6's bandwidth.
-
-	I also prefetched the read stream. Note that adding the read prefetch
-	forced me to add another cycle to the inner-most kernel - up to 11
-	from the original 8 cycles per iteration.  We could improve performance
-	further by unrolling the loop and doing multiple prefetches per cycle.
-
-   I think that the code below will be very robust and fast code for the
-   purposes of copying aligned pages.  It is slower when both source and
-   destination pages are in the dcache, but it is my guess that this is
-   less important than the dcache miss case.  */
-
-
-	.text
-	.align 4
-	.global copy_page
-	.ent copy_page
-copy_page:
-	.prologue 0
-
-	/* Prefetch 5 read cachelines; write-hint 10 cache lines.  */
-	wh64	($16)
-	ldl	$31,0($17)
-	ldl	$31,64($17)
-	lda	$1,1*64($16)
-
-	wh64	($1)
-	ldl	$31,128($17)
-	ldl	$31,192($17)
-	lda	$1,2*64($16)
-
-	wh64	($1)
-	ldl	$31,256($17)
-	lda	$18,118
-	lda	$1,3*64($16)
-
-	wh64	($1)
-	nop
-	lda	$1,4*64($16)
-	lda	$2,5*64($16)
-
-	wh64	($1)
-	wh64	($2)
-	lda	$1,6*64($16)
-	lda	$2,7*64($16)
-
-	wh64	($1)
-	wh64	($2)
-	lda	$1,8*64($16)
-	lda	$2,9*64($16)
-
-	wh64	($1)
-	wh64	($2)
-	lda	$19,10*64($16)
-	nop
-
-	/* Main prefetching/write-hinting loop.  */
-1:	ldq	$0,0($17)
-	ldq	$1,8($17)
-	unop
-	unop
-
-	unop
-	unop
-	ldq	$2,16($17)
-	ldq	$3,24($17)
-
-	ldq	$4,32($17)
-	ldq	$5,40($17)
-	unop
-	unop
-
-	unop
-	unop
-	ldq	$6,48($17)
-	ldq	$7,56($17)
-
-	ldl	$31,320($17)
-	unop
-	unop
-	unop
-
-	/* This gives the extra cycle of aeration above the minimum.  */
-	unop			
-	unop
-	unop
-	unop
-
-	wh64	($19)
-	unop
-	unop
-	unop
-
-	stq	$0,0($16)
-	subq	$18,1,$18
-	stq	$1,8($16)
-	unop
-
-	unop
-	stq	$2,16($16)
-	addq	$17,64,$17
-	stq	$3,24($16)
-
-	stq	$4,32($16)
-	stq	$5,40($16)
-	addq	$19,64,$19
-	unop
-
-	stq	$6,48($16)
-	stq	$7,56($16)
-	addq	$16,64,$16
-	bne	$18, 1b
-
-	/* Prefetch the final 5 cache lines of the read stream.  */
-	lda	$18,10
-	ldl	$31,320($17)
-	ldl	$31,384($17)
-	ldl	$31,448($17)
-
-	ldl	$31,512($17)
-	ldl	$31,576($17)
-	nop
-	nop
-
-	/* Non-prefetching, non-write-hinting cleanup loop for the
-	   final 10 cache lines.  */
-2:	ldq	$0,0($17)
-	ldq	$1,8($17)
-	ldq	$2,16($17)
-	ldq	$3,24($17)
-
-	ldq	$4,32($17)
-	ldq	$5,40($17)
-	ldq	$6,48($17)
-	ldq	$7,56($17)
-
-	stq	$0,0($16)
-	subq	$18,1,$18
-	stq	$1,8($16)
-	addq	$17,64,$17
-
-	stq	$2,16($16)
-	stq	$3,24($16)
-	stq	$4,32($16)
-	stq	$5,40($16)
-
-	stq	$6,48($16)
-	stq	$7,56($16)
-	addq	$16,64,$16
-	bne	$18, 2b
-
-	ret
-	nop
-	unop
-	nop
-
-	.end copy_page
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-copy_user.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-copy_user.S
deleted file mode 100644
index db42ffe9..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-copy_user.S
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * arch/alpha/lib/ev6-copy_user.S
- *
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Copy to/from user space, handling exceptions as we go..  This
- * isn't exactly pretty.
- *
- * This is essentially the same as "memcpy()", but with a few twists.
- * Notably, we have to make sure that $0 is always up-to-date and
- * contains the right "bytes left to copy" value (and that it is updated
- * only _after_ a successful copy). There is also some rather minor
- * exception setup stuff..
- *
- * NOTE! This is not directly C-callable, because the calling semantics are
- * different:
- *
- * Inputs:
- *	length in $0
- *	destination address in $6
- *	source address in $7
- *	return address in $28
- *
- * Outputs:
- *	bytes left to copy in $0
- *
- * Clobbers:
- *	$1,$2,$3,$4,$5,$6,$7
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- */
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EXI(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exitin-99b($31);	\
-	.previous
-
-#define EXO(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exitout-99b($31);	\
-	.previous
-
-	.set noat
-	.align 4
-	.globl __copy_user
-	.ent __copy_user
-				# Pipeline info: Slotting & Comments
-__copy_user:
-	.prologue 0
-	subq $0, 32, $1		# .. E  .. ..	: Is this going to be a small copy?
-	beq $0, $zerolength	# U  .. .. ..	: U L U L
-
-	and $6,7,$3		# .. .. .. E	: is leading dest misalignment
-	ble $1, $onebyteloop	# .. .. U  ..	: 1st branch : small amount of data
-	beq $3, $destaligned	# .. U  .. ..	: 2nd (one cycle fetcher stall)
-	subq $3, 8, $3		# E  .. .. ..	: L U U L : trip counter
-/*
- * The fetcher stall also hides the 1 cycle cross-cluster stall for $3 (L --> U)
- * This loop aligns the destination a byte at a time
- * We know we have at least one trip through this loop
- */
-$aligndest:
-	EXI( ldbu $1,0($7) )	# .. .. .. L	: Keep loads separate from stores
-	addq $6,1,$6		# .. .. E  ..	: Section 3.8 in the CWG
-	addq $3,1,$3		# .. E  .. ..	:
-	nop			# E  .. .. ..	: U L U L
-
-/*
- * the -1 is to compensate for the inc($6) done in a previous quadpack
- * which allows us zero dependencies within either quadpack in the loop
- */
-	EXO( stb $1,-1($6) )	# .. .. .. L	:
-	addq $7,1,$7		# .. .. E  ..	: Section 3.8 in the CWG
-	subq $0,1,$0		# .. E  .. ..	:
-	bne $3, $aligndest	# U  .. .. ..	: U L U L
-
-/*
- * If we fell through into here, we have a minimum of 33 - 7 bytes
- * If we arrived via branch, we have a minimum of 32 bytes
- */
-$destaligned:
-	and $7,7,$1		# .. .. .. E	: Check _current_ source alignment
-	bic $0,7,$4		# .. .. E  ..	: number bytes as a quadword loop
-	EXI( ldq_u $3,0($7) )	# .. L  .. ..	: Forward fetch for fallthrough code
-	beq $1,$quadaligned	# U  .. .. ..	: U L U L
-
-/*
- * In the worst case, we've just executed an ldq_u here from 0($7)
- * and we'll repeat it once if we take the branch
- */
-
-/* Misaligned quadword loop - not unrolled.  Leave it that way. */
-$misquad:
-	EXI( ldq_u $2,8($7) )	# .. .. .. L	:
-	subq $4,8,$4		# .. .. E  ..	:
-	extql $3,$7,$3		# .. U  .. ..	:
-	extqh $2,$7,$1		# U  .. .. ..	: U U L L
-
-	bis $3,$1,$1		# .. .. .. E	:
-	EXO( stq $1,0($6) )	# .. .. L  ..	:
-	addq $7,8,$7		# .. E  .. ..	:
-	subq $0,8,$0		# E  .. .. ..	: U L L U
-
-	addq $6,8,$6		# .. .. .. E	:
-	bis $2,$2,$3		# .. .. E  ..	:
-	nop			# .. E  .. ..	:
-	bne $4,$misquad		# U  .. .. ..	: U L U L
-
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	nop			# .. E  .. ..
-	beq $0,$zerolength	# U  .. .. ..	: U L U L
-
-/* We know we have at least one trip through the byte loop */
-	EXI ( ldbu $2,0($7) )	# .. .. .. L	: No loads in the same quad
-	addq $6,1,$6		# .. .. E  ..	: as the store (Section 3.8 in CWG)
-	nop			# .. E  .. ..	:
-	br $31, $dirtyentry	# L0 .. .. ..	: L U U L
-/* Do the trailing byte loop load, then hop into the store part of the loop */
-
-/*
- * A minimum of (33 - 7) bytes to do a quad at a time.
- * Based upon the usage context, it's worth the effort to unroll this loop
- * $0 - number of bytes to be moved
- * $4 - number of bytes to move as quadwords
- * $6 is current destination address
- * $7 is current source address
- */
-$quadaligned:
-	subq	$4, 32, $2	# .. .. .. E	: do not unroll for small stuff
-	nop			# .. .. E  ..
-	nop			# .. E  .. ..
-	blt	$2, $onequad	# U  .. .. ..	: U L U L
-
-/*
- * There is a significant assumption here that the source and destination
- * addresses differ by more than 32 bytes.  In this particular case, a
- * sparsity of registers further bounds this to be a minimum of 8 bytes.
- * But if this isn't met, then the output result will be incorrect.
- * Furthermore, due to a lack of available registers, we really can't
- * unroll this to be an 8x loop (which would enable us to use the wh64
- * instruction memory hint instruction).
- */
-$unroll4:
-	EXI( ldq $1,0($7) )	# .. .. .. L
-	EXI( ldq $2,8($7) )	# .. .. L  ..
-	subq	$4,32,$4	# .. E  .. ..
-	nop			# E  .. .. ..	: U U L L
-
-	addq	$7,16,$7	# .. .. .. E
-	EXO( stq $1,0($6) )	# .. .. L  ..
-	EXO( stq $2,8($6) )	# .. L  .. ..
-	subq	$0,16,$0	# E  .. .. ..	: U L L U
-
-	addq	$6,16,$6	# .. .. .. E
-	EXI( ldq $1,0($7) )	# .. .. L  ..
-	EXI( ldq $2,8($7) )	# .. L  .. ..
-	subq	$4, 32, $3	# E  .. .. ..	: U U L L : is there enough for another trip?
-
-	EXO( stq $1,0($6) )	# .. .. .. L
-	EXO( stq $2,8($6) )	# .. .. L  ..
-	subq	$0,16,$0	# .. E  .. ..
-	addq	$7,16,$7	# E  .. .. ..	: U L L U
-
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	addq	$6,16,$6	# .. E  .. ..
-	bgt	$3,$unroll4	# U  .. .. ..	: U L U L
-
-	nop
-	nop
-	nop
-	beq	$4, $noquads
-
-$onequad:
-	EXI( ldq $1,0($7) )
-	subq	$4,8,$4
-	addq	$7,8,$7
-	nop
-
-	EXO( stq $1,0($6) )
-	subq	$0,8,$0
-	addq	$6,8,$6
-	bne	$4,$onequad
-
-$noquads:
-	nop
-	nop
-	nop
-	beq $0,$zerolength
-
-/*
- * For small copies (or the tail of a larger copy), do a very simple byte loop.
- * There's no point in doing a lot of complex alignment calculations to try to
- * to quadword stuff for a small amount of data.
- *	$0 - remaining number of bytes left to copy
- *	$6 - current dest addr
- *	$7 - current source addr
- */
-
-$onebyteloop:
-	EXI ( ldbu $2,0($7) )	# .. .. .. L	: No loads in the same quad
-	addq $6,1,$6		# .. .. E  ..	: as the store (Section 3.8 in CWG)
-	nop			# .. E  .. ..	:
-	nop			# E  .. .. ..	: U L U L
-
-$dirtyentry:
-/*
- * the -1 is to compensate for the inc($6) done in a previous quadpack
- * which allows us zero dependencies within either quadpack in the loop
- */
-	EXO ( stb $2,-1($6) )	# .. .. .. L	:
-	addq $7,1,$7		# .. .. E  ..	: quadpack as the load
-	subq $0,1,$0		# .. E  .. ..	: change count _after_ copy
-	bgt $0,$onebyteloop	# U  .. .. ..	: U L U L
-
-$zerolength:
-$exitout:			# Destination for exception recovery(?)
-	nop			# .. .. .. E
-	nop			# .. .. E  ..
-	nop			# .. E  .. ..
-	ret $31,($28),1		# L0 .. .. ..	: L U L U
-
-$exitin:
-
-	/* A stupid byte-by-byte zeroing of the rest of the output
-	   buffer.  This cures security holes by never leaving 
-	   random kernel data around to be copied elsewhere.  */
-
-	nop
-	nop
-	nop
-	mov	$0,$1
-
-$101:
-	EXO ( stb $31,0($6) )	# L
-	subq $1,1,$1		# E
-	addq $6,1,$6		# E
-	bgt $1,$101		# U
-
-	nop
-	nop
-	nop
-	ret $31,($28),1		# L0
-
-	.end __copy_user
-
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-csum_ipv6_magic.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-csum_ipv6_magic.S
deleted file mode 100644
index fc0bc399..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-csum_ipv6_magic.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * arch/alpha/lib/ev6-csum_ipv6_magic.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * unsigned short csum_ipv6_magic(struct in6_addr *saddr,
- *                                struct in6_addr *daddr,
- *                                __u32 len,
- *                                unsigned short proto,
- *                                unsigned int csum);
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- * Determining actual stalls (other than slotting) doesn't appear to be easy to do.
- *
- * unsigned short csum_ipv6_magic(struct in6_addr *saddr,
- *                                struct in6_addr *daddr,
- *                                __u32 len,
- *                                unsigned short proto,
- *                                unsigned int csum);
- *
- * Swap <proto> (takes form 0xaabb)
- * Then shift it left by 48, so result is:
- *	0xbbaa0000 00000000
- * Then turn it back into a sign extended 32-bit item
- *	0xbbaa0000
- *
- * Swap <len> (an unsigned int) using Mike Burrows' 7-instruction sequence
- * (we can't hide the 3-cycle latency of the unpkbw in the 6-instruction sequence)
- * Assume input takes form 0xAABBCCDD
- *
- * Finally, original 'folding' approach is to split the long into 4 unsigned shorts
- * add 4 ushorts, resulting in ushort/carry
- * add carry bits + ushort --> ushort
- * add carry bits + ushort --> ushort (in case the carry results in an overflow)
- * Truncate to a ushort.  (took 13 instructions)
- * From doing some testing, using the approach in checksum.c:from64to16()
- * results in the same outcome:
- * split into 2 uints, add those, generating a ulong
- * add the 3 low ushorts together, generating a uint
- * a final add of the 2 lower ushorts
- * truncating the result.
- *
- * Misalignment handling added by Ivan Kokshaysky <ink@jurassic.park.msu.ru>
- * The cost is 16 instructions (~8 cycles), including two extra loads which
- * may cause additional delay in rare cases (load-load replay traps).
- */
-
-	.globl csum_ipv6_magic
-	.align 4
-	.ent csum_ipv6_magic
-	.frame $30,0,$26,0
-csum_ipv6_magic:
-	.prologue 0
-
-	ldq_u	$0,0($16)	# L : Latency: 3
-	inslh	$18,7,$4	# U : 0000000000AABBCC
-	ldq_u	$1,8($16)	# L : Latency: 3
-	sll	$19,8,$7	# U : U L U L : 0x00000000 00aabb00
-
-	and	$16,7,$6	# E : src misalignment
-	ldq_u	$5,15($16)	# L : Latency: 3
-	zapnot	$20,15,$20	# U : zero extend incoming csum
-	ldq_u	$2,0($17)	# L : U L U L : Latency: 3
-
-	extql	$0,$6,$0	# U :
-	extqh	$1,$6,$22	# U :
-	ldq_u	$3,8($17)	# L : Latency: 3
-	sll	$19,24,$19	# U : U U L U : 0x000000aa bb000000
-
-	cmoveq	$6,$31,$22	# E : src aligned?
-	ldq_u	$23,15($17)	# L : Latency: 3
-	inswl	$18,3,$18	# U : 000000CCDD000000
-	addl	$19,$7,$19	# E : U L U L : <sign bits>bbaabb00
-
-	or	$0,$22,$0	# E : 1st src word complete
-	extql	$1,$6,$1	# U :
-	or	$18,$4,$18	# E : 000000CCDDAABBCC
-	extqh	$5,$6,$5	# U : L U L U
-
-	and	$17,7,$6	# E : dst misalignment
-	extql	$2,$6,$2	# U :
-	or	$1,$5,$1	# E : 2nd src word complete
-	extqh	$3,$6,$22	# U : L U L U :
-
-	cmoveq	$6,$31,$22	# E : dst aligned?
-	extql	$3,$6,$3	# U :
-	addq	$20,$0,$20	# E : begin summing the words
-	extqh	$23,$6,$23	# U : L U L U :
-
-	srl	$18,16,$4	# U : 0000000000CCDDAA
-	or	$2,$22,$2	# E : 1st dst word complete
-	zap	$19,0x3,$19	# U : <sign bits>bbaa0000
-	or	$3,$23,$3	# E : U L U L : 2nd dst word complete
-
-	cmpult	$20,$0,$0	# E :
-	addq	$20,$1,$20	# E :
-	zapnot	$18,0xa,$18	# U : 00000000DD00BB00
-	zap	$4,0xa,$4	# U : U U L L : 0000000000CC00AA
-
-	or	$18,$4,$18	# E : 00000000DDCCBBAA
-	nop			# E :
-	cmpult	$20,$1,$1	# E :
-	addq	$20,$2,$20	# E : U L U L
-
-	cmpult	$20,$2,$2	# E :
-	addq	$20,$3,$20	# E :
-	cmpult	$20,$3,$3	# E : (1 cycle stall on $20)
-	addq	$20,$18,$20	# E : U L U L (1 cycle stall on $20)
-
-	cmpult	$20,$18,$18	# E :
-	addq	$20,$19,$20	# E : (1 cycle stall on $20)
-	addq	$0,$1,$0	# E : merge the carries back into the csum
-	addq	$2,$3,$2	# E :
-
-	cmpult	$20,$19,$19	# E :
-	addq	$18,$19,$18	# E : (1 cycle stall on $19)
-	addq	$0,$2,$0	# E :
-	addq	$20,$18,$20	# E : U L U L :
-		/* (1 cycle stall on $18, 2 cycles on $20) */
-
-	addq	$0,$20,$0	# E :
-	zapnot	$0,15,$1	# U : Start folding output (1 cycle stall on $0)
-	nop			# E :
-	srl	$0,32,$0	# U : U L U L : (1 cycle stall on $0)
-
-	addq	$1,$0,$1	# E : Finished generating ulong
-	extwl	$1,2,$2		# U : ushort[1] (1 cycle stall on $1)
-	zapnot	$1,3,$0		# U : ushort[0] (1 cycle stall on $1)
-	extwl	$1,4,$1		# U : ushort[2] (1 cycle stall on $1)
-
-	addq	$0,$2,$0	# E
-	addq	$0,$1,$3	# E : Finished generating uint
-		/* (1 cycle stall on $0) */
-	extwl	$3,2,$1		# U : ushort[1] (1 cycle stall on $3)
-	nop			# E : L U L U
-
-	addq	$1,$3,$0	# E : Final carry
-	not	$0,$4		# E : complement (1 cycle stall on $0)
-	zapnot	$4,3,$0		# U : clear upper garbage bits
-		/* (1 cycle stall on $4) */
-	ret			# L0 : L U L U
-
-	.end csum_ipv6_magic
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-divide.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-divide.S
deleted file mode 100644
index 2a82b9be..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-divide.S
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * arch/alpha/lib/ev6-divide.S
- *
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Alpha division..
- */
-
-/*
- * The alpha chip doesn't provide hardware division, so we have to do it
- * by hand.  The compiler expects the functions
- *
- *	__divqu: 64-bit unsigned long divide
- *	__remqu: 64-bit unsigned long remainder
- *	__divqs/__remqs: signed 64-bit
- *	__divlu/__remlu: unsigned 32-bit
- *	__divls/__remls: signed 32-bit
- *
- * These are not normal C functions: instead of the normal
- * calling sequence, these expect their arguments in registers
- * $24 and $25, and return the result in $27. Register $28 may
- * be clobbered (assembly temporary), anything else must be saved. 
- *
- * In short: painful.
- *
- * This is a rather simple bit-at-a-time algorithm: it's very good
- * at dividing random 64-bit numbers, but the more usual case where
- * the divisor is small is handled better by the DEC algorithm
- * using lookup tables. This uses much less memory, though, and is
- * nicer on the cache.. Besides, I don't know the copyright status
- * of the DEC code.
- */
-
-/*
- * My temporaries:
- *	$0 - current bit
- *	$1 - shifted divisor
- *	$2 - modulus/quotient
- *
- *	$23 - return address
- *	$24 - dividend
- *	$25 - divisor
- *
- *	$27 - quotient/modulus
- *	$28 - compare status
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#define halt .long 0
-
-/*
- * Select function type and registers
- */
-#define mask	$0
-#define divisor	$1
-#define compare $28
-#define tmp1	$3
-#define tmp2	$4
-
-#ifdef DIV
-#define DIV_ONLY(x,y...) x,##y
-#define MOD_ONLY(x,y...)
-#define func(x) __div##x
-#define modulus $2
-#define quotient $27
-#define GETSIGN(x) xor $24,$25,x
-#define STACK 48
-#else
-#define DIV_ONLY(x,y...)
-#define MOD_ONLY(x,y...) x,##y
-#define func(x) __rem##x
-#define modulus $27
-#define quotient $2
-#define GETSIGN(x) bis $24,$24,x
-#define STACK 32
-#endif
-
-/*
- * For 32-bit operations, we need to extend to 64-bit
- */
-#ifdef INTSIZE
-#define ufunction func(lu)
-#define sfunction func(l)
-#define LONGIFY(x) zapnot x,15,x
-#define SLONGIFY(x) addl x,0,x
-#else
-#define ufunction func(qu)
-#define sfunction func(q)
-#define LONGIFY(x)
-#define SLONGIFY(x)
-#endif
-
-.set noat
-.align	4
-.globl	ufunction
-.ent	ufunction
-ufunction:
-	subq	$30,STACK,$30		# E :
-	.frame	$30,STACK,$23
-	.prologue 0
-
-7:	stq	$1, 0($30)		# L :
-	bis	$25,$25,divisor		# E :
-	stq	$2, 8($30)		# L : L U L U
-
-	bis	$24,$24,modulus		# E :
-	stq	$0,16($30)		# L :
-	bis	$31,$31,quotient	# E :
-	LONGIFY(divisor)		# E : U L L U
-
-	stq	tmp1,24($30)		# L :
-	LONGIFY(modulus)		# E :
-	bis	$31,1,mask		# E :
-	DIV_ONLY(stq tmp2,32($30))	# L : L U U L
-
-	beq	divisor, 9f			/* div by zero */
-	/*
-	 * In spite of the DIV_ONLY being either a non-instruction
-	 * or an actual stq, the addition of the .align directive
-	 * below ensures that label 1 is going to be nicely aligned
-	 */
-
-	.align	4
-#ifdef INTSIZE
-	/*
-	 * shift divisor left, using 3-bit shifts for
-	 * 32-bit divides as we can't overflow. Three-bit
-	 * shifts will result in looping three times less
-	 * here, but can result in two loops more later.
-	 * Thus using a large shift isn't worth it (and
-	 * s8add pairs better than a sll..)
-	 */
-1:	cmpult	divisor,modulus,compare	# E :
-	s8addq	divisor,$31,divisor	# E :
-	s8addq	mask,$31,mask		# E :
-	bne	compare,1b		# U : U L U L
-#else
-1:	cmpult	divisor,modulus,compare	# E :
-	nop				# E :
-	nop				# E :
-	blt     divisor, 2f		# U : U L U L
-
-	addq	divisor,divisor,divisor	# E :
-	addq	mask,mask,mask		# E :
-	unop				# E :
-	bne	compare,1b		# U : U L U L
-#endif
-
-	/* ok, start to go right again.. */
-2:
-	/*
-	 * Keep things nicely bundled... use a nop instead of not
-	 * having an instruction for DIV_ONLY
-	 */
-#ifdef DIV
-	DIV_ONLY(addq quotient,mask,tmp2) # E :
-#else
-	nop				# E :
-#endif
-	srl	mask,1,mask		# U :
-	cmpule	divisor,modulus,compare	# E :
-	subq	modulus,divisor,tmp1	# E :
-
-#ifdef DIV
-	DIV_ONLY(cmovne compare,tmp2,quotient)	# E : Latency 2, extra map slot
-	nop				# E : as part of the cmovne
-	srl	divisor,1,divisor	# U :
-	nop				# E : L U L U
-
-	nop				# E :
-	cmovne	compare,tmp1,modulus	# E : Latency 2, extra map slot
-	nop				# E : as part of the cmovne
-	bne	mask,2b			# U : U L U L
-#else
-	srl	divisor,1,divisor	# U :
-	cmovne	compare,tmp1,modulus	# E : Latency 2, extra map slot
-	nop				# E : as part of the cmovne
-	bne	mask,2b			# U : U L L U
-#endif
-
-9:	ldq	$1, 0($30)		# L :
-	ldq	$2, 8($30)		# L :
-	nop				# E :
-	nop				# E : U U L L
-
-	ldq	$0,16($30)		# L :
-	ldq	tmp1,24($30)		# L :
-	nop				# E :
-	nop				# E :
-
-#ifdef DIV
-	DIV_ONLY(ldq tmp2,32($30))	# L :
-#else
-	nop				# E :
-#endif
-	addq	$30,STACK,$30		# E :
-	ret	$31,($23),1		# L0 : L U U L
-	.end	ufunction
-
-/*
- * Uhh.. Ugly signed division. I'd rather not have it at all, but
- * it's needed in some circumstances. There are different ways to
- * handle this, really. This does:
- * 	-a / b = a / -b = -(a / b)
- *	-a % b = -(a % b)
- *	a % -b = a % b
- * which is probably not the best solution, but at least should
- * have the property that (x/y)*y + (x%y) = x.
- */
-.align 4
-.globl	sfunction
-.ent	sfunction
-sfunction:
-	subq	$30,STACK,$30		# E :
-	.frame	$30,STACK,$23
-	.prologue 0
-	bis	$24,$25,$28		# E :
-	SLONGIFY($28)			# E :
-	bge	$28,7b			# U :
-
-	stq	$24,0($30)		# L :
-	subq	$31,$24,$28		# E :
-	stq	$25,8($30)		# L :
-	nop				# E : U L U L
-
-	cmovlt	$24,$28,$24	/* abs($24) */ # E : Latency 2, extra map slot
-	nop				# E : as part of the cmov
-	stq	$23,16($30)		# L :
-	subq	$31,$25,$28		# E : U L U L
-
-	stq	tmp1,24($30)		# L :
-	cmovlt	$25,$28,$25	/* abs($25) */ # E : Latency 2, extra map slot
-	nop				# E :
-	bsr	$23,ufunction		# L0: L U L U
-
-	ldq	$24,0($30)		# L :
-	ldq	$25,8($30)		# L :
-	GETSIGN($28)			# E :
-	subq	$31,$27,tmp1		# E : U U L L
-
-	SLONGIFY($28)			# E :
-	ldq	$23,16($30)		# L :
-	cmovlt	$28,tmp1,$27		# E : Latency 2, extra map slot
-	nop				# E : U L L U : as part of the cmov
-
-	ldq	tmp1,24($30)		# L :
-	nop				# E : as part of the cmov
-	addq	$30,STACK,$30		# E :
-	ret	$31,($23),1		# L0 : L U U L
-	.end	sfunction
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-memchr.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-memchr.S
deleted file mode 100644
index 1a5f71b9..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-memchr.S
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/alpha/lib/ev6-memchr.S
- *
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Finds characters in a memory area.  Optimized for the Alpha:
- *
- *    - memory accessed as aligned quadwords only
- *    - uses cmpbge to compare 8 bytes in parallel
- *    - does binary search to find 0 byte in last
- *      quadword (HAKMEM needed 12 instructions to
- *      do this instead of the 9 instructions that
- *      binary search needs).
- *
- * For correctness consider that:
- *
- *    - only minimum number of quadwords may be accessed
- *    - the third argument is an unsigned long
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-        .set noreorder
-        .set noat
-
-	.align	4
-	.globl memchr
-	.ent memchr
-memchr:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	# Hack -- if someone passes in (size_t)-1, hoping to just
-	# search til the end of the address space, we will overflow
-	# below when we find the address of the last byte.  Given
-	# that we will never have a 56-bit address space, cropping
-	# the length is the easiest way to avoid trouble.
-	zap	$18, 0x80, $5	# U : Bound length
-	beq	$18, $not_found	# U :
-        ldq_u   $1, 0($16)	# L : load first quadword Latency=3
-	and	$17, 0xff, $17	# E : L L U U : 00000000000000ch
-
-	insbl	$17, 1, $2	# U : 000000000000ch00
-	cmpult	$18, 9, $4	# E : small (< 1 quad) string?
-	or	$2, $17, $17	# E : 000000000000chch
-        lda     $3, -1($31)	# E : U L L U
-
-	sll	$17, 16, $2	# U : 00000000chch0000
-	addq	$16, $5, $5	# E : Max search address
-	or	$2, $17, $17	# E : 00000000chchchch
-	sll	$17, 32, $2	# U : U L L U : chchchch00000000
-
-	or	$2, $17, $17	# E : chchchchchchchch
-	extql	$1, $16, $7	# U : $7 is upper bits
-	beq	$4, $first_quad	# U :
-	ldq_u	$6, -1($5)	# L : L U U L : eight or less bytes to search Latency=3
-
-	extqh	$6, $16, $6	# U : 2 cycle stall for $6
-	mov	$16, $0		# E :
-	nop			# E :
-	or	$7, $6, $1	# E : L U L U $1 = quadword starting at $16
-
-	# Deal with the case where at most 8 bytes remain to be searched
-	# in $1.  E.g.:
-	#	$18 = 6
-	#	$1 = ????c6c5c4c3c2c1
-$last_quad:
-	negq	$18, $6		# E :
-        xor	$17, $1, $1	# E :
-	srl	$3, $6, $6	# U : $6 = mask of $18 bits set
-        cmpbge  $31, $1, $2	# E : L U L U
-
-	nop
-	nop
-	and	$2, $6, $2	# E :
-        beq     $2, $not_found	# U : U L U L
-
-$found_it:
-#ifdef CONFIG_ALPHA_EV67
-	/*
-	 * Since we are guaranteed to have set one of the bits, we don't
-	 * have to worry about coming back with a 0x40 out of cttz...
-	 */
-	cttz	$2, $3		# U0 :
-	addq	$0, $3, $0	# E : All done
-	nop			# E :
-	ret			# L0 : L U L U
-#else
-	/*
-	 * Slow and clunky.  It can probably be improved.
-	 * An exercise left for others.
-	 */
-        negq    $2, $3		# E :
-        and     $2, $3, $2	# E :
-        and     $2, 0x0f, $1	# E :
-        addq    $0, 4, $3	# E :
-
-        cmoveq  $1, $3, $0	# E : Latency 2, extra map cycle
-	nop			# E : keep with cmov
-        and     $2, 0x33, $1	# E :
-        addq    $0, 2, $3	# E : U L U L : 2 cycle stall on $0
-
-        cmoveq  $1, $3, $0	# E : Latency 2, extra map cycle
-	nop			# E : keep with cmov
-        and     $2, 0x55, $1	# E :
-        addq    $0, 1, $3	# E : U L U L : 2 cycle stall on $0
-
-        cmoveq  $1, $3, $0	# E : Latency 2, extra map cycle
-	nop
-	nop
-	ret			# L0 : L U L U
-#endif
-
-	# Deal with the case where $18 > 8 bytes remain to be
-	# searched.  $16 may not be aligned.
-	.align 4
-$first_quad:
-	andnot	$16, 0x7, $0	# E :
-        insqh   $3, $16, $2	# U : $2 = 0000ffffffffffff ($16<0:2> ff)
-        xor	$1, $17, $1	# E :
-	or	$1, $2, $1	# E : U L U L $1 = ====ffffffffffff
-
-        cmpbge  $31, $1, $2	# E :
-        bne     $2, $found_it	# U :
-	# At least one byte left to process.
-	ldq	$1, 8($0)	# L :
-	subq	$5, 1, $18	# E : U L U L
-
-	addq	$0, 8, $0	# E :
-	# Make $18 point to last quad to be accessed (the
-	# last quad may or may not be partial).
-	andnot	$18, 0x7, $18	# E :
-	cmpult	$0, $18, $2	# E :
-	beq	$2, $final	# U : U L U L
-
-	# At least two quads remain to be accessed.
-
-	subq	$18, $0, $4	# E : $4 <- nr quads to be processed
-	and	$4, 8, $4	# E : odd number of quads?
-	bne	$4, $odd_quad_count # U :
-	# At least three quads remain to be accessed
-	mov	$1, $4		# E : L U L U : move prefetched value to correct reg
-
-	.align	4
-$unrolled_loop:
-	ldq	$1, 8($0)	# L : prefetch $1
-	xor	$17, $4, $2	# E :
-	cmpbge	$31, $2, $2	# E :
-	bne	$2, $found_it	# U : U L U L
-
-	addq	$0, 8, $0	# E :
-	nop			# E :
-	nop			# E :
-	nop			# E :
-
-$odd_quad_count:
-	xor	$17, $1, $2	# E :
-	ldq	$4, 8($0)	# L : prefetch $4
-	cmpbge	$31, $2, $2	# E :
-	addq	$0, 8, $6	# E :
-
-	bne	$2, $found_it	# U :
-	cmpult	$6, $18, $6	# E :
-	addq	$0, 8, $0	# E :
-	nop			# E :
-
-	bne	$6, $unrolled_loop # U :
-	mov	$4, $1		# E : move prefetched value into $1
-	nop			# E :
-	nop			# E :
-
-$final:	subq	$5, $0, $18	# E : $18 <- number of bytes left to do
-	nop			# E :
-	nop			# E :
-	bne	$18, $last_quad	# U :
-
-$not_found:
-	mov	$31, $0		# E :
-	nop			# E :
-	nop			# E :
-	ret			# L0 :
-
-        .end memchr
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-memcpy.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-memcpy.S
deleted file mode 100644
index 52b37b0f..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-memcpy.S
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * arch/alpha/lib/ev6-memcpy.S
- * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Reasonably optimized memcpy() routine for the Alpha 21264
- *
- *	- memory accessed as aligned quadwords only
- *	- uses bcmpge to compare 8 bytes in parallel
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- *
- * Temp usage notes:
- *	$1,$2,		- scratch
- */
-
-	.set noreorder
-	.set noat
-
-	.align	4
-	.globl memcpy
-	.ent memcpy
-memcpy:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	mov	$16, $0			# E : copy dest to return
-	ble	$18, $nomoredata	# U : done with the copy?
-	xor	$16, $17, $1		# E : are source and dest alignments the same?
-	and	$1, 7, $1		# E : are they the same mod 8?
-
-	bne	$1, $misaligned		# U : Nope - gotta do this the slow way
-	/* source and dest are same mod 8 address */
-	and	$16, 7, $1		# E : Are both 0mod8?
-	beq	$1, $both_0mod8		# U : Yes
-	nop				# E :
-
-	/*
-	 * source and dest are same misalignment.  move a byte at a time
-	 * until a 0mod8 alignment for both is reached.
-	 * At least one byte more to move
-	 */
-
-$head_align:
-	ldbu	$1, 0($17)		# L : grab a byte
-	subq	$18, 1, $18		# E : count--
-	addq	$17, 1, $17		# E : src++
-	stb	$1, 0($16)		# L :
-	addq	$16, 1, $16		# E : dest++
-	and	$16, 7, $1		# E : Are we at 0mod8 yet?
-	ble	$18, $nomoredata	# U : done with the copy?
-	bne	$1, $head_align		# U :
-
-$both_0mod8:
-	cmple	$18, 127, $1		# E : Can we unroll the loop?
-	bne	$1, $no_unroll		# U :
-	and	$16, 63, $1		# E : get mod64 alignment
-	beq	$1, $do_unroll		# U : no single quads to fiddle
-
-$single_head_quad:
-	ldq	$1, 0($17)		# L : get 8 bytes
-	subq	$18, 8, $18		# E : count -= 8
-	addq	$17, 8, $17		# E : src += 8
-	nop				# E :
-
-	stq	$1, 0($16)		# L : store
-	addq	$16, 8, $16		# E : dest += 8
-	and	$16, 63, $1		# E : get mod64 alignment
-	bne	$1, $single_head_quad	# U : still not fully aligned
-
-$do_unroll:
-	addq	$16, 64, $7		# E : Initial (+1 trip) wh64 address
-	cmple	$18, 127, $1		# E : Can we go through the unrolled loop?
-	bne	$1, $tail_quads		# U : Nope
-	nop				# E : 
-
-$unroll_body:
-	wh64	($7)			# L1 : memory subsystem hint: 64 bytes at
-					# ($7) are about to be over-written
-	ldq	$6, 0($17)		# L0 : bytes 0..7
-	nop				# E :
-	nop				# E :
-
-	ldq	$4, 8($17)		# L : bytes 8..15
-	ldq	$5, 16($17)		# L : bytes 16..23
-	addq	$7, 64, $7		# E : Update next wh64 address
-	nop				# E :
-
-	ldq	$3, 24($17)		# L : bytes 24..31
-	addq	$16, 64, $1		# E : fallback value for wh64
-	nop				# E :
-	nop				# E :
-
-	addq	$17, 32, $17		# E : src += 32 bytes
-	stq	$6, 0($16)		# L : bytes 0..7
-	nop				# E :
-	nop				# E :
-
-	stq	$4, 8($16)		# L : bytes 8..15
-	stq	$5, 16($16)		# L : bytes 16..23
-	subq	$18, 192, $2		# E : At least two more trips to go?
-	nop				# E :
-
-	stq	$3, 24($16)		# L : bytes 24..31
-	addq	$16, 32, $16		# E : dest += 32 bytes
-	nop				# E :
-	nop				# E :
-
-	ldq	$6, 0($17)		# L : bytes 0..7
-	ldq	$4, 8($17)		# L : bytes 8..15
-	cmovlt	$2, $1, $7		# E : Latency 2, extra map slot - Use
-					# fallback wh64 address if < 2 more trips
-	nop				# E :
-
-	ldq	$5, 16($17)		# L : bytes 16..23
-	ldq	$3, 24($17)		# L : bytes 24..31
-	addq	$16, 32, $16		# E : dest += 32
-	subq	$18, 64, $18		# E : count -= 64
-
-	addq	$17, 32, $17		# E : src += 32
-	stq	$6, -32($16)		# L : bytes 0..7
-	stq	$4, -24($16)		# L : bytes 8..15
-	cmple	$18, 63, $1		# E : At least one more trip?
-
-	stq	$5, -16($16)		# L : bytes 16..23
-	stq	$3, -8($16)		# L : bytes 24..31
-	nop				# E :
-	beq	$1, $unroll_body
-
-$tail_quads:
-$no_unroll:
-	.align 4
-	subq	$18, 8, $18		# E : At least a quad left?
-	blt	$18, $less_than_8	# U : Nope
-	nop				# E :
-	nop				# E :
-
-$move_a_quad:
-	ldq	$1, 0($17)		# L : fetch 8
-	subq	$18, 8, $18		# E : count -= 8
-	addq	$17, 8, $17		# E : src += 8
-	nop				# E :
-
-	stq	$1, 0($16)		# L : store 8
-	addq	$16, 8, $16		# E : dest += 8
-	bge	$18, $move_a_quad	# U :
-	nop				# E :
-
-$less_than_8:
-	.align 4
-	addq	$18, 8, $18		# E : add back for trailing bytes
-	ble	$18, $nomoredata	# U : All-done
-	nop				# E :
-	nop				# E :
-
-	/* Trailing bytes */
-$tail_bytes:
-	subq	$18, 1, $18		# E : count--
-	ldbu	$1, 0($17)		# L : fetch a byte
-	addq	$17, 1, $17		# E : src++
-	nop				# E :
-
-	stb	$1, 0($16)		# L : store a byte
-	addq	$16, 1, $16		# E : dest++
-	bgt	$18, $tail_bytes	# U : more to be done?
-	nop				# E :
-
-	/* branching to exit takes 3 extra cycles, so replicate exit here */
-	ret	$31, ($26), 1		# L0 :
-	nop				# E :
-	nop				# E :
-	nop				# E :
-
-$misaligned:
-	mov	$0, $4			# E : dest temp
-	and	$0, 7, $1		# E : dest alignment mod8
-	beq	$1, $dest_0mod8		# U : life doesnt totally suck
-	nop
-
-$aligndest:
-	ble	$18, $nomoredata	# U :
-	ldbu	$1, 0($17)		# L : fetch a byte
-	subq	$18, 1, $18		# E : count--
-	addq	$17, 1, $17		# E : src++
-
-	stb	$1, 0($4)		# L : store it
-	addq	$4, 1, $4		# E : dest++
-	and	$4, 7, $1		# E : dest 0mod8 yet?
-	bne	$1, $aligndest		# U : go until we are aligned.
-
-	/* Source has unknown alignment, but dest is known to be 0mod8 */
-$dest_0mod8:
-	subq	$18, 8, $18		# E : At least a quad left?
-	blt	$18, $misalign_tail	# U : Nope
-	ldq_u	$3, 0($17)		# L : seed (rotating load) of 8 bytes
-	nop				# E :
-
-$mis_quad:
-	ldq_u	$16, 8($17)		# L : Fetch next 8
-	extql	$3, $17, $3		# U : masking
-	extqh	$16, $17, $1		# U : masking
-	bis	$3, $1, $1		# E : merged bytes to store
-
-	subq	$18, 8, $18		# E : count -= 8
-	addq	$17, 8, $17		# E : src += 8
-	stq	$1, 0($4)		# L : store 8 (aligned)
-	mov	$16, $3			# E : "rotate" source data
-
-	addq	$4, 8, $4		# E : dest += 8
-	bge	$18, $mis_quad		# U : More quads to move
-	nop
-	nop
-
-$misalign_tail:
-	addq	$18, 8, $18		# E : account for tail stuff
-	ble	$18, $nomoredata	# U :
-	nop
-	nop
-
-$misalign_byte:
-	ldbu	$1, 0($17)		# L : fetch 1
-	subq	$18, 1, $18		# E : count--
-	addq	$17, 1, $17		# E : src++
-	nop				# E :
-
-	stb	$1, 0($4)		# L : store
-	addq	$4, 1, $4		# E : dest++
-	bgt	$18, $misalign_byte	# U : more to go?
-	nop
-
-
-$nomoredata:
-	ret	$31, ($26), 1		# L0 :
-	nop				# E :
-	nop				# E :
-	nop				# E :
-
-	.end memcpy
-
-/* For backwards module compatibility.  */
-__memcpy = memcpy
-.globl __memcpy
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-memset.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-memset.S
deleted file mode 100644
index d8b94e1c..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-memset.S
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- * arch/alpha/lib/ev6-memset.S
- *
- * This is an efficient (and relatively small) implementation of the C library
- * "memset()" function for the 21264 implementation of Alpha.
- *
- * 21264 version  contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * The algorithm for the leading and trailing quadwords remains the same,
- * however the loop has been unrolled to enable better memory throughput,
- * and the code has been replicated for each of the entry points: __memset
- * and __memsetw to permit better scheduling to eliminate the stalling
- * encountered during the mask replication.
- * A future enhancement might be to put in a byte store loop for really
- * small (say < 32 bytes) memset()s.  Whether or not that change would be
- * a win in the kernel would depend upon the contextual usage.
- * WARNING: Maintaining this is going to be more work than the above version,
- * as fixes will need to be made in multiple places.  The performance gain
- * is worth it.
- */
-
-	.set noat
-	.set noreorder
-.text
-	.globl __memset
-	.globl __memsetw
-	.globl __constant_c_memset
-	.globl memset
-
-	.ent __memset
-.align 5
-__memset:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	/*
-	 * Serious stalling happens.  The only way to mitigate this is to
-	 * undertake a major re-write to interleave the constant materialization
-	 * with other parts of the fall-through code.  This is important, even
-	 * though it makes maintenance tougher.
-	 * Do this later.
-	 */
-	and $17,255,$1		# E : 00000000000000ch
-	insbl $17,1,$2		# U : 000000000000ch00
-	bis $16,$16,$0		# E : return value
-	ble $18,end_b		# U : zero length requested?
-
-	addq $18,$16,$6		# E : max address to write to
-	bis	$1,$2,$17	# E : 000000000000chch
-	insbl	$1,2,$3		# U : 0000000000ch0000
-	insbl	$1,3,$4		# U : 00000000ch000000
-
-	or	$3,$4,$3	# E : 00000000chch0000
-	inswl	$17,4,$5	# U : 0000chch00000000
-	xor	$16,$6,$1	# E : will complete write be within one quadword?
-	inswl	$17,6,$2	# U : chch000000000000
-
-	or	$17,$3,$17	# E : 00000000chchchch
-	or	$2,$5,$2	# E : chchchch00000000
-	bic	$1,7,$1		# E : fit within a single quadword?
-	and	$16,7,$3	# E : Target addr misalignment
-
-	or	$17,$2,$17	# E : chchchchchchchch
-	beq	$1,within_quad_b # U :
-	nop			# E :
-	beq	$3,aligned_b	# U : target is 0mod8
-
-	/*
-	 * Target address is misaligned, and won't fit within a quadword
-	 */
-	ldq_u $4,0($16)		# L : Fetch first partial
-	bis $16,$16,$5		# E : Save the address
-	insql $17,$16,$2	# U : Insert new bytes
-	subq $3,8,$3		# E : Invert (for addressing uses)
-
-	addq $18,$3,$18		# E : $18 is new count ($3 is negative)
-	mskql $4,$16,$4		# U : clear relevant parts of the quad
-	subq $16,$3,$16		# E : $16 is new aligned destination
-	bis $2,$4,$1		# E : Final bytes
-
-	nop
-	stq_u $1,0($5)		# L : Store result
-	nop
-	nop
-
-.align 4
-aligned_b:
-	/*
-	 * We are now guaranteed to be quad aligned, with at least
-	 * one partial quad to write.
-	 */
-
-	sra $18,3,$3		# U : Number of remaining quads to write
-	and $18,7,$18		# E : Number of trailing bytes to write
-	bis $16,$16,$5		# E : Save dest address
-	beq $3,no_quad_b	# U : tail stuff only
-
-	/*
-	 * it's worth the effort to unroll this and use wh64 if possible
-	 * Lifted a bunch of code from clear_user.S
-	 * At this point, entry values are:
-	 * $16	Current destination address
-	 * $5	A copy of $16
-	 * $6	The max quadword address to write to
-	 * $18	Number trailer bytes
-	 * $3	Number quads to write
-	 */
-
-	and	$16, 0x3f, $2	# E : Forward work (only useful for unrolled loop)
-	subq	$3, 16, $4	# E : Only try to unroll if > 128 bytes
-	subq	$2, 0x40, $1	# E : bias counter (aligning stuff 0mod64)
-	blt	$4, loop_b	# U :
-
-	/*
-	 * We know we've got at least 16 quads, minimum of one trip
-	 * through unrolled loop.  Do a quad at a time to get us 0mod64
-	 * aligned.
-	 */
-
-	nop			# E :
-	nop			# E :
-	nop			# E :
-	beq	$1, $bigalign_b	# U :
-
-$alignmod64_b:
-	stq	$17, 0($5)	# L :
-	subq	$3, 1, $3	# E : For consistency later
-	addq	$1, 8, $1	# E : Increment towards zero for alignment
-	addq	$5, 8, $4	# E : Initial wh64 address (filler instruction)
-
-	nop
-	nop
-	addq	$5, 8, $5	# E : Inc address
-	blt	$1, $alignmod64_b # U :
-
-$bigalign_b:
-	/*
-	 * $3 - number quads left to go
-	 * $5 - target address (aligned 0mod64)
-	 * $17 - mask of stuff to store
-	 * Scratch registers available: $7, $2, $4, $1
-	 * we know that we'll be taking a minimum of one trip through
- 	 * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
-	 * Assumes the wh64 needs to be for 2 trips through the loop in the future
-	 * The wh64 is issued on for the starting destination address for trip +2
-	 * through the loop, and if there are less than two trips left, the target
-	 * address will be for the current trip.
-	 */
-
-$do_wh64_b:
-	wh64	($4)		# L1 : memory subsystem write hint
-	subq	$3, 24, $2	# E : For determining future wh64 addresses
-	stq	$17, 0($5)	# L :
-	nop			# E :
-
-	addq	$5, 128, $4	# E : speculative target of next wh64
-	stq	$17, 8($5)	# L :
-	stq	$17, 16($5)	# L :
-	addq	$5, 64, $7	# E : Fallback address for wh64 (== next trip addr)
-
-	stq	$17, 24($5)	# L :
-	stq	$17, 32($5)	# L :
-	cmovlt	$2, $7, $4	# E : Latency 2, extra mapping cycle
-	nop
-
-	stq	$17, 40($5)	# L :
-	stq	$17, 48($5)	# L :
-	subq	$3, 16, $2	# E : Repeat the loop at least once more?
-	nop
-
-	stq	$17, 56($5)	# L :
-	addq	$5, 64, $5	# E :
-	subq	$3, 8, $3	# E :
-	bge	$2, $do_wh64_b	# U :
-
-	nop
-	nop
-	nop
-	beq	$3, no_quad_b	# U : Might have finished already
-
-.align 4
-	/*
-	 * Simple loop for trailing quadwords, or for small amounts
-	 * of data (where we can't use an unrolled loop and wh64)
-	 */
-loop_b:
-	stq $17,0($5)		# L :
-	subq $3,1,$3		# E : Decrement number quads left
-	addq $5,8,$5		# E : Inc address
-	bne $3,loop_b		# U : more?
-
-no_quad_b:
-	/*
-	 * Write 0..7 trailing bytes.
-	 */
-	nop			# E :
-	beq $18,end_b		# U : All done?
-	ldq $7,0($5)		# L :
-	mskqh $7,$6,$2		# U : Mask final quad
-
-	insqh $17,$6,$4		# U : New bits
-	bis $2,$4,$1		# E : Put it all together
-	stq $1,0($5)		# L : And back to memory
-	ret $31,($26),1		# L0 :
-
-within_quad_b:
-	ldq_u $1,0($16)		# L :
-	insql $17,$16,$2	# U : New bits
-	mskql $1,$16,$4		# U : Clear old
-	bis $2,$4,$2		# E : New result
-
-	mskql $2,$6,$4		# U :
-	mskqh $1,$6,$2		# U :
-	bis $2,$4,$1		# E :
-	stq_u $1,0($16)		# L :
-
-end_b:
-	nop
-	nop
-	nop
-	ret $31,($26),1		# L0 :
-	.end __memset
-
-	/*
-	 * This is the original body of code, prior to replication and
-	 * rescheduling.  Leave it here, as there may be calls to this
-	 * entry point.
-	 */
-.align 4
-	.ent __constant_c_memset
-__constant_c_memset:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	addq $18,$16,$6		# E : max address to write to
-	bis $16,$16,$0		# E : return value
-	xor $16,$6,$1		# E : will complete write be within one quadword?
-	ble $18,end		# U : zero length requested?
-
-	bic $1,7,$1		# E : fit within a single quadword
-	beq $1,within_one_quad	# U :
-	and $16,7,$3		# E : Target addr misalignment
-	beq $3,aligned		# U : target is 0mod8
-
-	/*
-	 * Target address is misaligned, and won't fit within a quadword
-	 */
-	ldq_u $4,0($16)		# L : Fetch first partial
-	bis $16,$16,$5		# E : Save the address
-	insql $17,$16,$2	# U : Insert new bytes
-	subq $3,8,$3		# E : Invert (for addressing uses)
-
-	addq $18,$3,$18		# E : $18 is new count ($3 is negative)
-	mskql $4,$16,$4		# U : clear relevant parts of the quad
-	subq $16,$3,$16		# E : $16 is new aligned destination
-	bis $2,$4,$1		# E : Final bytes
-
-	nop
-	stq_u $1,0($5)		# L : Store result
-	nop
-	nop
-
-.align 4
-aligned:
-	/*
-	 * We are now guaranteed to be quad aligned, with at least
-	 * one partial quad to write.
-	 */
-
-	sra $18,3,$3		# U : Number of remaining quads to write
-	and $18,7,$18		# E : Number of trailing bytes to write
-	bis $16,$16,$5		# E : Save dest address
-	beq $3,no_quad		# U : tail stuff only
-
-	/*
-	 * it's worth the effort to unroll this and use wh64 if possible
-	 * Lifted a bunch of code from clear_user.S
-	 * At this point, entry values are:
-	 * $16	Current destination address
-	 * $5	A copy of $16
-	 * $6	The max quadword address to write to
-	 * $18	Number trailer bytes
-	 * $3	Number quads to write
-	 */
-
-	and	$16, 0x3f, $2	# E : Forward work (only useful for unrolled loop)
-	subq	$3, 16, $4	# E : Only try to unroll if > 128 bytes
-	subq	$2, 0x40, $1	# E : bias counter (aligning stuff 0mod64)
-	blt	$4, loop	# U :
-
-	/*
-	 * We know we've got at least 16 quads, minimum of one trip
-	 * through unrolled loop.  Do a quad at a time to get us 0mod64
-	 * aligned.
-	 */
-
-	nop			# E :
-	nop			# E :
-	nop			# E :
-	beq	$1, $bigalign	# U :
-
-$alignmod64:
-	stq	$17, 0($5)	# L :
-	subq	$3, 1, $3	# E : For consistency later
-	addq	$1, 8, $1	# E : Increment towards zero for alignment
-	addq	$5, 8, $4	# E : Initial wh64 address (filler instruction)
-
-	nop
-	nop
-	addq	$5, 8, $5	# E : Inc address
-	blt	$1, $alignmod64	# U :
-
-$bigalign:
-	/*
-	 * $3 - number quads left to go
-	 * $5 - target address (aligned 0mod64)
-	 * $17 - mask of stuff to store
-	 * Scratch registers available: $7, $2, $4, $1
-	 * we know that we'll be taking a minimum of one trip through
- 	 * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
-	 * Assumes the wh64 needs to be for 2 trips through the loop in the future
-	 * The wh64 is issued on for the starting destination address for trip +2
-	 * through the loop, and if there are less than two trips left, the target
-	 * address will be for the current trip.
-	 */
-
-$do_wh64:
-	wh64	($4)		# L1 : memory subsystem write hint
-	subq	$3, 24, $2	# E : For determining future wh64 addresses
-	stq	$17, 0($5)	# L :
-	nop			# E :
-
-	addq	$5, 128, $4	# E : speculative target of next wh64
-	stq	$17, 8($5)	# L :
-	stq	$17, 16($5)	# L :
-	addq	$5, 64, $7	# E : Fallback address for wh64 (== next trip addr)
-
-	stq	$17, 24($5)	# L :
-	stq	$17, 32($5)	# L :
-	cmovlt	$2, $7, $4	# E : Latency 2, extra mapping cycle
-	nop
-
-	stq	$17, 40($5)	# L :
-	stq	$17, 48($5)	# L :
-	subq	$3, 16, $2	# E : Repeat the loop at least once more?
-	nop
-
-	stq	$17, 56($5)	# L :
-	addq	$5, 64, $5	# E :
-	subq	$3, 8, $3	# E :
-	bge	$2, $do_wh64	# U :
-
-	nop
-	nop
-	nop
-	beq	$3, no_quad	# U : Might have finished already
-
-.align 4
-	/*
-	 * Simple loop for trailing quadwords, or for small amounts
-	 * of data (where we can't use an unrolled loop and wh64)
-	 */
-loop:
-	stq $17,0($5)		# L :
-	subq $3,1,$3		# E : Decrement number quads left
-	addq $5,8,$5		# E : Inc address
-	bne $3,loop		# U : more?
-
-no_quad:
-	/*
-	 * Write 0..7 trailing bytes.
-	 */
-	nop			# E :
-	beq $18,end		# U : All done?
-	ldq $7,0($5)		# L :
-	mskqh $7,$6,$2		# U : Mask final quad
-
-	insqh $17,$6,$4		# U : New bits
-	bis $2,$4,$1		# E : Put it all together
-	stq $1,0($5)		# L : And back to memory
-	ret $31,($26),1		# L0 :
-
-within_one_quad:
-	ldq_u $1,0($16)		# L :
-	insql $17,$16,$2	# U : New bits
-	mskql $1,$16,$4		# U : Clear old
-	bis $2,$4,$2		# E : New result
-
-	mskql $2,$6,$4		# U :
-	mskqh $1,$6,$2		# U :
-	bis $2,$4,$1		# E :
-	stq_u $1,0($16)		# L :
-
-end:
-	nop
-	nop
-	nop
-	ret $31,($26),1		# L0 :
-	.end __constant_c_memset
-
-	/*
-	 * This is a replicant of the __constant_c_memset code, rescheduled
-	 * to mask stalls.  Note that entry point names also had to change
-	 */
-	.align 5
-	.ent __memsetw
-
-__memsetw:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	inswl $17,0,$5		# U : 000000000000c1c2
-	inswl $17,2,$2		# U : 00000000c1c20000
-	bis $16,$16,$0		# E : return value
-	addq	$18,$16,$6	# E : max address to write to
-
-	ble $18, end_w		# U : zero length requested?
-	inswl	$17,4,$3	# U : 0000c1c200000000
-	inswl	$17,6,$4	# U : c1c2000000000000
-	xor	$16,$6,$1	# E : will complete write be within one quadword?
-
-	or	$2,$5,$2	# E : 00000000c1c2c1c2
-	or	$3,$4,$17	# E : c1c2c1c200000000
-	bic	$1,7,$1		# E : fit within a single quadword
-	and	$16,7,$3	# E : Target addr misalignment
-
-	or	$17,$2,$17	# E : c1c2c1c2c1c2c1c2
-	beq $1,within_quad_w	# U :
-	nop
-	beq $3,aligned_w	# U : target is 0mod8
-
-	/*
-	 * Target address is misaligned, and won't fit within a quadword
-	 */
-	ldq_u $4,0($16)		# L : Fetch first partial
-	bis $16,$16,$5		# E : Save the address
-	insql $17,$16,$2	# U : Insert new bytes
-	subq $3,8,$3		# E : Invert (for addressing uses)
-
-	addq $18,$3,$18		# E : $18 is new count ($3 is negative)
-	mskql $4,$16,$4		# U : clear relevant parts of the quad
-	subq $16,$3,$16		# E : $16 is new aligned destination
-	bis $2,$4,$1		# E : Final bytes
-
-	nop
-	stq_u $1,0($5)		# L : Store result
-	nop
-	nop
-
-.align 4
-aligned_w:
-	/*
-	 * We are now guaranteed to be quad aligned, with at least
-	 * one partial quad to write.
-	 */
-
-	sra $18,3,$3		# U : Number of remaining quads to write
-	and $18,7,$18		# E : Number of trailing bytes to write
-	bis $16,$16,$5		# E : Save dest address
-	beq $3,no_quad_w	# U : tail stuff only
-
-	/*
-	 * it's worth the effort to unroll this and use wh64 if possible
-	 * Lifted a bunch of code from clear_user.S
-	 * At this point, entry values are:
-	 * $16	Current destination address
-	 * $5	A copy of $16
-	 * $6	The max quadword address to write to
-	 * $18	Number trailer bytes
-	 * $3	Number quads to write
-	 */
-
-	and	$16, 0x3f, $2	# E : Forward work (only useful for unrolled loop)
-	subq	$3, 16, $4	# E : Only try to unroll if > 128 bytes
-	subq	$2, 0x40, $1	# E : bias counter (aligning stuff 0mod64)
-	blt	$4, loop_w	# U :
-
-	/*
-	 * We know we've got at least 16 quads, minimum of one trip
-	 * through unrolled loop.  Do a quad at a time to get us 0mod64
-	 * aligned.
-	 */
-
-	nop			# E :
-	nop			# E :
-	nop			# E :
-	beq	$1, $bigalign_w	# U :
-
-$alignmod64_w:
-	stq	$17, 0($5)	# L :
-	subq	$3, 1, $3	# E : For consistency later
-	addq	$1, 8, $1	# E : Increment towards zero for alignment
-	addq	$5, 8, $4	# E : Initial wh64 address (filler instruction)
-
-	nop
-	nop
-	addq	$5, 8, $5	# E : Inc address
-	blt	$1, $alignmod64_w	# U :
-
-$bigalign_w:
-	/*
-	 * $3 - number quads left to go
-	 * $5 - target address (aligned 0mod64)
-	 * $17 - mask of stuff to store
-	 * Scratch registers available: $7, $2, $4, $1
-	 * we know that we'll be taking a minimum of one trip through
- 	 * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
-	 * Assumes the wh64 needs to be for 2 trips through the loop in the future
-	 * The wh64 is issued on for the starting destination address for trip +2
-	 * through the loop, and if there are less than two trips left, the target
-	 * address will be for the current trip.
-	 */
-
-$do_wh64_w:
-	wh64	($4)		# L1 : memory subsystem write hint
-	subq	$3, 24, $2	# E : For determining future wh64 addresses
-	stq	$17, 0($5)	# L :
-	nop			# E :
-
-	addq	$5, 128, $4	# E : speculative target of next wh64
-	stq	$17, 8($5)	# L :
-	stq	$17, 16($5)	# L :
-	addq	$5, 64, $7	# E : Fallback address for wh64 (== next trip addr)
-
-	stq	$17, 24($5)	# L :
-	stq	$17, 32($5)	# L :
-	cmovlt	$2, $7, $4	# E : Latency 2, extra mapping cycle
-	nop
-
-	stq	$17, 40($5)	# L :
-	stq	$17, 48($5)	# L :
-	subq	$3, 16, $2	# E : Repeat the loop at least once more?
-	nop
-
-	stq	$17, 56($5)	# L :
-	addq	$5, 64, $5	# E :
-	subq	$3, 8, $3	# E :
-	bge	$2, $do_wh64_w	# U :
-
-	nop
-	nop
-	nop
-	beq	$3, no_quad_w	# U : Might have finished already
-
-.align 4
-	/*
-	 * Simple loop for trailing quadwords, or for small amounts
-	 * of data (where we can't use an unrolled loop and wh64)
-	 */
-loop_w:
-	stq $17,0($5)		# L :
-	subq $3,1,$3		# E : Decrement number quads left
-	addq $5,8,$5		# E : Inc address
-	bne $3,loop_w		# U : more?
-
-no_quad_w:
-	/*
-	 * Write 0..7 trailing bytes.
-	 */
-	nop			# E :
-	beq $18,end_w		# U : All done?
-	ldq $7,0($5)		# L :
-	mskqh $7,$6,$2		# U : Mask final quad
-
-	insqh $17,$6,$4		# U : New bits
-	bis $2,$4,$1		# E : Put it all together
-	stq $1,0($5)		# L : And back to memory
-	ret $31,($26),1		# L0 :
-
-within_quad_w:
-	ldq_u $1,0($16)		# L :
-	insql $17,$16,$2	# U : New bits
-	mskql $1,$16,$4		# U : Clear old
-	bis $2,$4,$2		# E : New result
-
-	mskql $2,$6,$4		# U :
-	mskqh $1,$6,$2		# U :
-	bis $2,$4,$1		# E :
-	stq_u $1,0($16)		# L :
-
-end_w:
-	nop
-	nop
-	nop
-	ret $31,($26),1		# L0 :
-
-	.end __memsetw
-
-memset = __memset
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-strncpy_from_user.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-strncpy_from_user.S
deleted file mode 100644
index d2e28178..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-strncpy_from_user.S
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * arch/alpha/lib/ev6-strncpy_from_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Just like strncpy except in the return value:
- *
- * -EFAULT       if an exception occurs before the terminator is copied.
- * N             if the buffer filled.
- *
- * Otherwise the length of the string is returned.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * A bunch of instructions got moved and temp registers were changed
- * to aid in scheduling.  Control flow was also re-arranged to eliminate
- * branches, and to provide longer code sequences to enable better scheduling.
- * A total rewrite (using byte load/stores for start & tail sequences)
- * is desirable, but very difficult to do without a from-scratch rewrite.
- * Save that for the future.
- */
-
-
-#include <asm/errno.h>
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($0); 	\
-	.previous
-
-
-	.set noat
-	.set noreorder
-	.text
-
-	.globl __strncpy_from_user
-	.ent __strncpy_from_user
-	.frame $30, 0, $26
-	.prologue 0
-
-	.align 4
-__strncpy_from_user:
-	and	a0, 7, t3	# E : find dest misalignment
-	beq	a2, $zerolength	# U :
-
-	/* Are source and destination co-aligned?  */
-	mov	a0, v0		# E : save the string start
-	xor	a0, a1, t4	# E :
-	EX( ldq_u t1, 0(a1) )	# L : Latency=3 load first quadword
-	ldq_u	t0, 0(a0)	# L : load first (partial) aligned dest quadword
-
-	addq	a2, t3, a2	# E : bias count by dest misalignment
-	subq	a2, 1, a3	# E :
-	addq	zero, 1, t10	# E :
-	and	t4, 7, t4	# E : misalignment between the two
-
-	and	a3, 7, t6	# E : number of tail bytes
-	sll	t10, t6, t10	# E : t10 = bitmask of last count byte
-	bne	t4, $unaligned	# U :
-	lda	t2, -1		# E : build a mask against false zero
-
-	/*
-	 * We are co-aligned; take care of a partial first word.
-	 * On entry to this basic block:
-	 * t0 == the first destination word for masking back in
-	 * t1 == the first source word.
-	 */
-
-	srl	a3, 3, a2	# E : a2 = loop counter = (count - 1)/8
-	addq	a1, 8, a1	# E :
-	mskqh	t2, a1, t2	# U :   detection in the src word
-	nop
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	mskqh	t1, a1, t3	# U :
-	mskql	t0, a1, t0	# U : assemble the first output word
-	ornot	t1, t2, t2	# E :
-	nop
-
-	cmpbge	zero, t2, t8	# E : bits set iff null found
-	or	t0, t3, t0	# E :
-	beq	a2, $a_eoc	# U :
-	bne	t8, $a_eos	# U : 2nd branch in a quad.  Bad.
-
-	/* On entry to this basic block:
-	 * t0 == a source quad not containing a null.
-	 * a0 - current aligned destination address
-	 * a1 - current aligned source address
-	 * a2 - count of quadwords to move.
-	 * NOTE: Loop improvement - unrolling this is going to be
-	 *	a huge win, since we're going to stall otherwise.
-	 *	Fix this later.  For _really_ large copies, look
-	 *	at using wh64 on a look-ahead basis.  See the code
-	 *	in clear_user.S and copy_user.S.
-	 * Presumably, since (a0) and (a1) do not overlap (by C definition)
-	 * Lots of nops here:
-	 *	- Separate loads from stores
-	 *	- Keep it to 1 branch/quadpack so the branch predictor
-	 *	  can train.
-	 */
-$a_loop:
-	stq_u	t0, 0(a0)	# L :
-	addq	a0, 8, a0	# E :
-	nop
-	subq	a2, 1, a2	# E :
-
-	EX( ldq_u t0, 0(a1) )	# L :
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t0, t8	# E : Stall 2 cycles on t0
-	beq	a2, $a_eoc      # U :
-
-	beq	t8, $a_loop	# U :
-	nop
-	nop
-	nop
-
-	/* Take care of the final (partial) word store.  At this point
-	 * the end-of-count bit is set in t8 iff it applies.
-	 *
-	 * On entry to this basic block we have:
-	 * t0 == the source word containing the null
-	 * t8 == the cmpbge mask that found it.
-	 */
-$a_eos:
-	negq	t8, t12		# E : find low bit set
-	and	t8, t12, t12	# E : 
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-
-	or	t12, t6, t8	# E :
-	zapnot	t0, t8, t0	# U : clear src bytes > null
-	zap	t1, t8, t1	# U : clear dst bytes <= null
-	or	t0, t1, t0	# E :
-
-	stq_u	t0, 0(a0)	# L :
-	br	$finish_up	# L0 :
-	nop
-	nop
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-	.align 4
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-	nop
-	nop
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 4
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	EX( ldq_u t2, 8(a1) )	# L : load second src word
-	addq	a1, 8, a1	# E :
-	mskql	t0, a0, t0	# U : mask trailing garbage in dst
-	extqh	t2, a1, t4	# U :
-
-	or	t1, t4, t1	# E : first aligned src word complete
-	mskqh	t1, a0, t1	# U : mask leading garbage in src
-	or	t0, t1, t0	# E : first output word complete
-	or	t0, t6, t6	# E : mask original data for zero test
-
-	cmpbge	zero, t6, t8	# E :
-	beq	a2, $u_eocfin	# U :
-	bne	t8, $u_final	# U : bad news - 2nd branch in a quad
-	lda	t6, -1		# E : mask out the bits we have
-
-	mskql	t6, a1, t6	# U :   already seen
-	stq_u	t0, 0(a0)	# L : store first output word
-	or      t6, t2, t2	# E :
-	cmpbge	zero, t2, t8	# E : find nulls in second partial
-
-	addq	a0, 8, a0		# E :
-	subq	a2, 1, a2		# E :
-	bne	t8, $u_late_head_exit	# U :
-	nop
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# U : position hi-bits of lo word
-	EX( ldq_u t2, 8(a1) )	# L : read next high-order source word
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t2, t8	# E :
-
-	beq	a2, $u_eoc	# U :
-	bne	t8, $u_eos	# U :
-	nop
-	nop
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	/*
-	 * Extra nops here:
-	 *	separate load quads from store quads
-	 *	only one branch/quad to permit predictor training
-	 */
-
-	.align 4
-$u_loop:
-	extqh	t2, a1, t0	# U : extract high bits for current word
-	addq	a1, 8, a1	# E :
-	extql	t2, a1, t3	# U : extract low bits for next time
-	addq	a0, 8, a0	# E :
-
-	or	t0, t1, t0	# E : current dst word now complete
-	EX( ldq_u t2, 0(a1) )	# L : load high word for next time
-	subq	a2, 1, a2	# E :
-	nop
-
-	stq_u	t0, -8(a0)	# L : save the current word
-	mov	t3, t1		# E :
-	cmpbge	zero, t2, t8	# E : test new word for eos
-	beq	a2, $u_eoc	# U :
-
-	beq	t8, $u_loop	# U :
-	nop
-	nop
-	nop
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-	.align 4
-$u_eos:
-	extqh	t2, a1, t0	# U :
-	or	t0, t1, t0	# E : first (partial) source word complete
-	cmpbge	zero, t0, t8	# E : is the null in this first bit?
-	nop
-
-	bne	t8, $u_final	# U :
-	stq_u	t0, 0(a0)	# L : the null was in the high-order bits
-	addq	a0, 8, a0	# E :
-	subq	a2, 1, a2	# E :
-
-	.align 4
-$u_late_head_exit:
-	extql	t2, a1, t0	# U :
-	cmpbge	zero, t0, t8	# E :
-	or	t8, t10, t6	# E :
-	cmoveq	a2, t6, t8	# E :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-	.align 4
-$u_final:
-	negq	t8, t6		# E : isolate low bit set
-	and	t6, t8, t12	# E :
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-
-	or	t6, t12, t8	# E :
-	zapnot	t0, t8, t0	# U : kill source bytes > null
-	zap	t1, t8, t1	# U : kill dest bytes <= null
-	or	t0, t1, t0	# E :
-
-	stq_u	t0, 0(a0)	# E :
-	br	$finish_up	# U :
-	nop
-	nop
-
-	.align 4
-$u_eoc:				# end-of-count
-	extqh	t2, a1, t0	# U :
-	or	t0, t1, t0	# E :
-	cmpbge	zero, t0, t8	# E :
-	nop
-
-	.align 4
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8	# E :
-	br	$u_final	# U :
-	nop
-	nop
-
-	/* Unaligned copy entry point.  */
-	.align 4
-$unaligned:
-
-	srl	a3, 3, a2	# U : a2 = loop counter = (count - 1)/8
-	and	a0, 7, t4	# E : find dest misalignment
-	and	a1, 7, t5	# E : find src misalignment
-	mov	zero, t0	# E :
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t6	# E :
-	beq	t4, 1f		# U :
-	ldq_u	t0, 0(a0)	# L :
-	lda	t6, -1		# E :
-
-	mskql	t6, a0, t6	# E :
-	nop
-	nop
-	nop
-
-	.align 4
-1:
-	subq	a1, t4, a1	# E : sub dest misalignment from src addr
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-	cmplt	t4, t5, t12	# E :
-	extql	t1, a1, t1	# U : shift src into place
-	lda	t2, -1		# E : for creating masks later
-
-	beq	t12, $u_head	# U :
-	mskqh	t2, t5, t2	# U : begin src byte validity mask
-	cmpbge	zero, t1, t8	# E : is there a zero?
-	nop
-
-	extql	t2, a1, t2	# U :
-	or	t8, t10, t5	# E : test for end-of-count too
-	cmpbge	zero, t2, t3	# E :
-	cmoveq	a2, t5, t8	# E : Latency=2, extra map slot
-
-	nop			# E : goes with cmov
-	andnot	t8, t3, t8	# E :
-	beq	t8, $u_head	# U :
-	nop
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# L :
-	negq	t8, t6		# E : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# U :
-	and	t6, t8, t12	# E :
-
-	subq	t12, 1, t6	# E :
-	or	t6, t12, t8	# E :
-	zapnot	t2, t8, t2	# U : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# U : to source validity mask
-
-	andnot	t0, t2, t0	# E : zero place for source to reside
-	or	t0, t1, t0	# E : and put it there
-	stq_u	t0, 0(a0)	# L :
-	nop
-
-	.align 4
-$finish_up:
-	zapnot	t0, t12, t4	# U : was last byte written null?
-	and	t12, 0xf0, t3	# E : binary search for the address of the
-	cmovne	t4, 1, t4	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-
-	and	t12, 0xcc, t2	# E : last byte written
-	and	t12, 0xaa, t1	# E :
-	cmovne	t3, 4, t3	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-
-	bic	a0, 7, t0
-	cmovne	t2, 2, t2	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-	nop
-
-	cmovne	t1, 1, t1	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-	addq	t0, t3, t0	# E :
-	addq	t1, t2, t1	# E :
-
-	addq	t0, t1, t0	# E :
-	addq	t0, t4, t0	# add one if we filled the buffer
-	subq	t0, v0, v0	# find string length
-	ret			# L0 :
-
-	.align 4
-$zerolength:
-	nop
-	nop
-	nop
-	clr	v0
-
-$exception:
-	nop
-	nop
-	nop
-	ret
-
-	.end __strncpy_from_user
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-stxcpy.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-stxcpy.S
deleted file mode 100644
index 4643ff2f..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-stxcpy.S
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * arch/alpha/lib/ev6-stxcpy.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Copy a null-terminated string from SRC to DST.
- *
- * This is an internal routine used by strcpy, stpcpy, and strcat.
- * As such, it uses special linkage conventions to make implementation
- * of these public functions more efficient.
- *
- * On input:
- *	t9 = return address
- *	a0 = DST
- *	a1 = SRC
- *
- * On output:
- *	t12 = bitmask (with one bit set) indicating the last byte written
- *	a0  = unaligned address of the last *word* written
- *
- * Furthermore, v0, a3-a5, t11, and t12 are untouched.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#include <asm/regdef.h>
-
-	.set noat
-	.set noreorder
-
-	.text
-
-/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that
-   doesn't like putting the entry point for a procedure somewhere in the
-   middle of the procedure descriptor.  Work around this by putting the
-   aligned copy in its own procedure descriptor */
-
-
-	.ent stxcpy_aligned
-	.align 4
-stxcpy_aligned:
-	.frame sp, 0, t9
-	.prologue 0
-
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# E : build a mask against false zero
-	mskqh	t2, a1, t2	# U :   detection in the src word (stall)
-	mskqh	t1, a1, t3	# U :
-	ornot	t1, t2, t2	# E : (stall)
-
-	mskql	t0, a1, t0	# U : assemble the first output word
-	cmpbge	zero, t2, t8	# E : bits set iff null found
-	or	t0, t3, t1	# E : (stall)
-	bne	t8, $a_eos	# U : (stall)
-
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == a source word not containing a null.  */
-	/* Nops here to separate store quads from load quads */
-
-$a_loop:
-	stq_u	t1, 0(a0)	# L :
-	addq	a0, 8, a0	# E :
-	nop
-	nop
-
-	ldq_u	t1, 0(a1)	# L : Latency=3
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t1, t8	# E : (3 cycle stall)
-	beq	t8, $a_loop	# U : (stall for t8)
-
-	/* Take care of the final (partial) word store.
-	   On entry to this basic block we have:
-	   t1 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-$a_eos:
-	negq	t8, t6		# E : find low bit set
-	and	t8, t6, t12	# E : (stall)
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# E : (stall)
-	bne	t6, 1f		# U : (stall)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t0, 0(a0)	# L : Latency=3
-	subq	t12, 1, t6	# E :
-	zapnot	t1, t6, t1	# U : clear src bytes >= null (stall)
-	or	t12, t6, t8	# E : (stall)
-
-	zap	t0, t8, t0	# E : clear dst bytes <= null
-	or	t0, t1, t1	# E : (stall)
-	nop
-	nop
-
-1:	stq_u	t1, 0(a0)	# L :
-	ret	(t9)		# L0 : Latency=3
-	nop
-	nop
-
-	.end stxcpy_aligned
-
-	.align 4
-	.ent __stxcpy
-	.globl __stxcpy
-__stxcpy:
-	.frame sp, 0, t9
-	.prologue 0
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t0	# E :
-	unop			# E :
-	and	t0, 7, t0	# E : (stall)
-	bne	t0, $unaligned	# U : (stall)
-
-	/* We are co-aligned; take care of a partial first word.  */
-	ldq_u	t1, 0(a1)		# L : load first src word
-	and	a0, 7, t0		# E : take care not to load a word ...
-	addq	a1, 8, a1		# E :
-	beq	t0, stxcpy_aligned	# U : ... if we wont need it (stall)
-
-	ldq_u	t0, 0(a0)	# L :
-	br	stxcpy_aligned	# L0 : Latency=3
-	nop
-	nop
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 4
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, for masking back in, if needed else 0
-	   t1 == the low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	ldq_u	t2, 8(a1)	# L :
-	addq	a1, 8, a1	# E :
-	extql	t1, a1, t1	# U : (stall on a1)
-	extqh	t2, a1, t4	# U : (stall on a1)
-
-	mskql	t0, a0, t0	# U :
-	or	t1, t4, t1	# E :
-	mskqh	t1, a0, t1	# U : (stall on t1)
-	or	t0, t1, t1	# E : (stall on t1)
-
-	or	t1, t6, t6	# E :
-	cmpbge	zero, t6, t8	# E : (stall)
-	lda	t6, -1		# E : for masking just below
-	bne	t8, $u_final	# U : (stall)
-
-	mskql	t6, a1, t6		# U : mask out the bits we have
-	or	t6, t2, t2		# E :   already extracted before (stall)
-	cmpbge	zero, t2, t8		# E :   testing eos (stall)
-	bne	t8, $u_late_head_exit	# U : (stall)
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	stq_u	t1, 0(a0)	# L : store first output word
-	addq	a0, 8, a0	# E :
-	extql	t2, a1, t0	# U : position ho-bits of lo word
-	ldq_u	t2, 8(a1)	# U : read next high-order source word
-
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t2, t8	# E : (stall for t2)
-	nop			# E :
-	bne	t8, $u_eos	# U : (stall)
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t0 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 3
-$u_loop:
-	extqh	t2, a1, t1	# U : extract high bits for current word
-	addq	a1, 8, a1	# E : (stall)
-	extql	t2, a1, t3	# U : extract low bits for next time (stall)
-	addq	a0, 8, a0	# E :
-
-	or	t0, t1, t1	# E : current dst word now complete
-	ldq_u	t2, 0(a1)	# L : Latency=3 load high word for next time
-	stq_u	t1, -8(a0)	# L : save the current word (stall)
-	mov	t3, t0		# E :
-
-	cmpbge	zero, t2, t8	# E : test new word for eos
-	beq	t8, $u_loop	# U : (stall)
-	nop
-	nop
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t0 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	extqh	t2, a1, t1	# U :
-	or	t0, t1, t1	# E : first (partial) source word complete (stall)
-	cmpbge	zero, t1, t8	# E : is the null in this first bit? (stall)
-	bne	t8, $u_final	# U : (stall)
-
-$u_late_head_exit:
-	stq_u	t1, 0(a0)	# L : the null was in the high-order bits
-	addq	a0, 8, a0	# E :
-	extql	t2, a1, t1	# U :
-	cmpbge	zero, t1, t8	# E : (stall)
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t1 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# E : isolate low bit set
-	and	t6, t8, t12	# E : (stall)
-	and	t12, 0x80, t6	# E : avoid dest word load if we can (stall)
-	bne	t6, 1f		# U : (stall)
-
-	ldq_u	t0, 0(a0)	# E :
-	subq	t12, 1, t6	# E :
-	or	t6, t12, t8	# E : (stall)
-	zapnot	t1, t6, t1	# U : kill source bytes >= null (stall)
-
-	zap	t0, t8, t0	# U : kill dest bytes <= null (2 cycle data stall)
-	or	t0, t1, t1	# E : (stall)
-	nop
-	nop
-
-1:	stq_u	t1, 0(a0)	# L :
-	ret	(t9)		# L0 : Latency=3
-	nop
-	nop
-
-	/* Unaligned copy entry point.  */
-	.align 4
-$unaligned:
-
-	ldq_u	t1, 0(a1)	# L : load first source word
-	and	a0, 7, t4	# E : find dest misalignment
-	and	a1, 7, t5	# E : find src misalignment
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-	mov	zero, t0	# E :
-
-	mov	zero, t6	# E :
-	beq	t4, 1f		# U :
-	ldq_u	t0, 0(a0)	# L :
-	lda	t6, -1		# E :
-
-	mskql	t6, a0, t6	# U :
-	nop
-	nop
-	nop
-1:
-	subq	a1, t4, a1	# E : sub dest misalignment from src addr
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-	cmplt	t4, t5, t12	# E :
-	beq	t12, $u_head	# U :
-	lda	t2, -1		# E : mask out leading garbage in source
-
-	mskqh	t2, t5, t2	# U :
-	ornot	t1, t2, t3	# E : (stall)
-	cmpbge	zero, t3, t8	# E : is there a zero? (stall)
-	beq	t8, $u_head	# U : (stall)
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# L :
-	negq	t8, t6		# E : build bitmask of bytes <= zero
-	and	t6, t8, t12	# E : (stall)
-	and	a1, 7, t5	# E :
-
-	subq	t12, 1, t6	# E :
-	or	t6, t12, t8	# E : (stall)
-	srl	t12, t5, t12	# U : adjust final null return value
-	zapnot	t2, t8, t2	# U : prepare source word; mirror changes (stall)
-
-	and	t1, t2, t1	# E : to source validity mask
-	extql	t2, a1, t2	# U :
-	extql	t1, a1, t1	# U : (stall)
-	andnot	t0, t2, t0	# .. e1 : zero place for source to reside (stall)
-
-	or	t0, t1, t1	# e1    : and put it there
-	stq_u	t1, 0(a0)	# .. e0 : (stall)
-	ret	(t9)		# e1    :
-	nop
-
-	.end __stxcpy
-
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev6-stxncpy.S b/ANDROID_3.4.5/arch/alpha/lib/ev6-stxncpy.S
deleted file mode 100644
index 1aa6e97e..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev6-stxncpy.S
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * arch/alpha/lib/ev6-stxncpy.S
- * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com>
- *
- * Copy no more than COUNT bytes of the null-terminated string from
- * SRC to DST.
- *
- * This is an internal routine used by strncpy, stpncpy, and strncat.
- * As such, it uses special linkage conventions to make implementation
- * of these public functions more efficient.
- *
- * On input:
- *	t9 = return address
- *	a0 = DST
- *	a1 = SRC
- *	a2 = COUNT
- *
- * Furthermore, COUNT may not be zero.
- *
- * On output:
- *	t0  = last word written
- *	t10 = bitmask (with one bit set) indicating the byte position of
- *	      the end of the range specified by COUNT
- *	t12 = bitmask (with one bit set) indicating the last byte written
- *	a0  = unaligned address of the last *word* written
- *	a2  = the number of full words left in COUNT
- *
- * Furthermore, v0, a3-a5, t11, and $at are untouched.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#include <asm/regdef.h>
-
-	.set noat
-	.set noreorder
-
-	.text
-
-/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that
-   doesn't like putting the entry point for a procedure somewhere in the
-   middle of the procedure descriptor.  Work around this by putting the
-   aligned copy in its own procedure descriptor */
-
-
-	.ent stxncpy_aligned
-	.align 4
-stxncpy_aligned:
-	.frame sp, 0, t9, 0
-	.prologue 0
-
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# E : build a mask against false zero
-	mskqh	t2, a1, t2	# U :   detection in the src word (stall)
-	mskqh	t1, a1, t3	# U :
-	ornot	t1, t2, t2	# E : (stall)
-
-	mskql	t0, a1, t0	# U : assemble the first output word
-	cmpbge	zero, t2, t8	# E : bits set iff null found
-	or	t0, t3, t0	# E : (stall)
-	beq	a2, $a_eoc	# U :
-
-	bne	t8, $a_eos	# U :
-	nop
-	nop
-	nop
-
-	/* On entry to this basic block:
-	   t0 == a source word not containing a null.  */
-
-	/*
-	 * nops here to:
-	 *	separate store quads from load quads
-	 *	limit of 1 bcond/quad to permit training
-	 */
-$a_loop:
-	stq_u	t0, 0(a0)	# L :
-	addq	a0, 8, a0	# E :
-	subq	a2, 1, a2	# E :
-	nop
-
-	ldq_u	t0, 0(a1)	# L :
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t0, t8	# E :
-	beq	a2, $a_eoc      # U :
-
-	beq	t8, $a_loop	# U :
-	nop
-	nop
-	nop
-
-	/* Take care of the final (partial) word store.  At this point
-	   the end-of-count bit is set in t8 iff it applies.
-
-	   On entry to this basic block we have:
-	   t0 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-
-$a_eos:
-	negq	t8, t12		# E : find low bit set
-	and	t8, t12, t12	# E : (stall)
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# E : (stall)
-	bne	t6, 1f		# U : (stall)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-	or	t12, t6, t8	# E : (stall)
-	zapnot	t0, t8, t0	# U : clear src bytes > null (stall)
-
-	zap	t1, t8, t1	# .. e1 : clear dst bytes <= null
-	or	t0, t1, t0	# e1    : (stall)
-	nop
-	nop
-
-1:	stq_u	t0, 0(a0)	# L :
-	ret	(t9)		# L0 : Latency=3
-	nop
-	nop
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-$a_eoc:
-	or	t10, t8, t8	# E :
-	br	$a_eos		# L0 : Latency=3
-	nop
-	nop
-
-	.end stxncpy_aligned
-
-	.align 4
-	.ent __stxncpy
-	.globl __stxncpy
-__stxncpy:
-	.frame sp, 0, t9, 0
-	.prologue 0
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t1	# E :
-	and	a0, 7, t0	# E : find dest misalignment
-	and	t1, 7, t1	# E : (stall)
-	addq	a2, t0, a2	# E : bias count by dest misalignment (stall)
-
-	subq	a2, 1, a2	# E :
-	and	a2, 7, t2	# E : (stall)
-	srl	a2, 3, a2	# U : a2 = loop counter = (count - 1)/8 (stall)
-	addq	zero, 1, t10	# E :
-
-	sll	t10, t2, t10	# U : t10 = bitmask of last count byte
-	bne	t1, $unaligned	# U :
-	/* We are co-aligned; take care of a partial first word.  */
-	ldq_u	t1, 0(a1)	# L : load first src word
-	addq	a1, 8, a1	# E :
-
-	beq	t0, stxncpy_aligned     # U : avoid loading dest word if not needed
-	ldq_u	t0, 0(a0)	# L :
-	nop
-	nop
-
-	br	stxncpy_aligned	# .. e1 :
-	nop
-	nop
-	nop
-
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 4
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	ldq_u	t2, 8(a1)	# L : Latency=3 load second src word
-	addq	a1, 8, a1	# E :
-	mskql	t0, a0, t0	# U : mask trailing garbage in dst
-	extqh	t2, a1, t4	# U : (3 cycle stall on t2)
-
-	or	t1, t4, t1	# E : first aligned src word complete (stall)
-	mskqh	t1, a0, t1	# U : mask leading garbage in src (stall)
-	or	t0, t1, t0	# E : first output word complete (stall)
-	or	t0, t6, t6	# E : mask original data for zero test (stall)
-
-	cmpbge	zero, t6, t8	# E :
-	beq	a2, $u_eocfin	# U :
-	lda	t6, -1		# E :
-	nop
-
-	bne	t8, $u_final	# U :
-	mskql	t6, a1, t6	# U : mask out bits already seen
-	stq_u	t0, 0(a0)	# L : store first output word
-	or      t6, t2, t2	# E : (stall)
-
-	cmpbge	zero, t2, t8	# E : find nulls in second partial
-	addq	a0, 8, a0	# E :
-	subq	a2, 1, a2	# E :
-	bne	t8, $u_late_head_exit	# U :
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-	extql	t2, a1, t1	# U : position hi-bits of lo word
-	beq	a2, $u_eoc	# U :
-	ldq_u	t2, 8(a1)	# L : read next high-order source word
-	addq	a1, 8, a1	# E :
-
-	extqh	t2, a1, t0	# U : position lo-bits of hi word (stall)
-	cmpbge	zero, t2, t8	# E :
-	nop
-	bne	t8, $u_eos	# U :
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t0 == the shifted low-order bits from the current source word
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 4
-$u_loop:
-	or	t0, t1, t0	# E : current dst word now complete
-	subq	a2, 1, a2	# E : decrement word count
-	extql	t2, a1, t1	# U : extract low bits for next time
-	addq	a0, 8, a0	# E :
-
-	stq_u	t0, -8(a0)	# U : save the current word
-	beq	a2, $u_eoc	# U :
-	ldq_u	t2, 8(a1)	# U : Latency=3 load high word for next time
-	addq	a1, 8, a1	# E :
-
-	extqh	t2, a1, t0	# U : extract low bits (2 cycle stall)
-	cmpbge	zero, t2, t8	# E : test new word for eos
-	nop
-	beq	t8, $u_loop	# U :
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t0 == the shifted low-order bits from the current source word
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	or	t0, t1, t0	# E : first (partial) source word complete
-	nop
-	cmpbge	zero, t0, t8	# E : is the null in this first bit? (stall)
-	bne	t8, $u_final	# U : (stall)
-
-	stq_u	t0, 0(a0)	# L : the null was in the high-order bits
-	addq	a0, 8, a0	# E :
-	subq	a2, 1, a2	# E :
-	nop
-
-$u_late_head_exit:
-	extql	t2, a1, t0	# U :
-	cmpbge	zero, t0, t8	# E :
-	or	t8, t10, t6	# E : (stall)
-	cmoveq	a2, t6, t8	# E : Latency=2, extra map slot (stall)
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# E : isolate low bit set
-	and	t6, t8, t12	# E : (stall)
-	and	t12, 0x80, t6	# E : avoid dest word load if we can (stall)
-	bne	t6, 1f		# U : (stall)
-
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-	or	t6, t12, t8	# E : (stall)
-	zapnot	t0, t8, t0	# U : kill source bytes > null
-
-	zap	t1, t8, t1	# U : kill dest bytes <= null
-	or	t0, t1, t0	# E : (stall)
-	nop
-	nop
-
-1:	stq_u	t0, 0(a0)	# L :
-	ret	(t9)		# L0 : Latency=3
-
-	  /* Got to end-of-count before end of string.  
-	     On entry to this basic block:
-	     t1 == the shifted high-order bits from the previous source word  */
-$u_eoc:
-	and	a1, 7, t6	# E : avoid final load if possible
-	sll	t10, t6, t6	# U : (stall)
-	and	t6, 0xff, t6	# E : (stall)
-	bne	t6, 1f		# U : (stall)
-
-	ldq_u	t2, 8(a1)	# L : load final src word
-	nop
-	extqh	t2, a1, t0	# U : extract low bits for last word (stall)
-	or	t1, t0, t1	# E : (stall)
-
-1:	cmpbge	zero, t1, t8	# E :
-	mov	t1, t0		# E :
-
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8	# E :
-	br	$u_final	# L0 : Latency=3
-
-	/* Unaligned copy entry point.  */
-	.align 4
-$unaligned:
-
-	ldq_u	t1, 0(a1)	# L : load first source word
-	and	a0, 7, t4	# E : find dest misalignment
-	and	a1, 7, t5	# E : find src misalignment
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-	mov	zero, t0	# E :
-
-	mov	zero, t6	# E :
-	beq	t4, 1f		# U :
-	ldq_u	t0, 0(a0)	# L :
-	lda	t6, -1		# E :
-
-	mskql	t6, a0, t6	# U :
-	nop
-	nop
-	subq	a1, t4, a1	# E : sub dest misalignment from src addr
-
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-
-1:	cmplt	t4, t5, t12	# E :
-	extql	t1, a1, t1	# U : shift src into place
-	lda	t2, -1		# E : for creating masks later
-	beq	t12, $u_head	# U : (stall)
-
-	extql	t2, a1, t2	# U :
-	cmpbge	zero, t1, t8	# E : is there a zero?
-	andnot	t2, t6, t2	# E : dest mask for a single word copy
-	or	t8, t10, t5	# E : test for end-of-count too
-
-	cmpbge	zero, t2, t3	# E :
-	cmoveq	a2, t5, t8	# E : Latency=2, extra map slot
-	nop			# E : keep with cmoveq
-	andnot	t8, t3, t8	# E : (stall)
-
-	beq	t8, $u_head	# U :
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-	ldq_u	t0, 0(a0)	# L :
-	negq	t8, t6		# E : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# U :
-
-	and	t6, t8, t12	# E :
-	subq	t12, 1, t6	# E : (stall)
-	or	t6, t12, t8	# E : (stall)
-	zapnot	t2, t8, t2	# U : prepare source word; mirror changes (stall)
-
-	zapnot	t1, t8, t1	# U : to source validity mask
-	andnot	t0, t2, t0	# E : zero place for source to reside
-	or	t0, t1, t0	# E : and put it there (stall both t0, t1)
-	stq_u	t0, 0(a0)	# L : (stall)
-
-	ret	(t9)		# L0 : Latency=3
-	nop
-	nop
-	nop
-
-	.end __stxncpy
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev67-strcat.S b/ANDROID_3.4.5/arch/alpha/lib/ev67-strcat.S
deleted file mode 100644
index c426fe3e..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev67-strcat.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strcat.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Append a null-terminated string from SRC to DST.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- * Commentary: It seems bogus to walk the input string twice - once
- * to determine the length, and then again while doing the copy.
- * A significant (future) enhancement would be to only read the input
- * string once.
- */
-
-
-	.text
-
-	.align 4
-	.globl strcat
-	.ent strcat
-strcat:
-	.frame $30, 0, $26
-	.prologue 0
-
-	mov	$16, $0		# E : set up return value
-	/* Find the end of the string.  */
-	ldq_u   $1, 0($16)	# L : load first quadword (a0 may be misaligned)
-	lda     $2, -1		# E :
-	insqh   $2, $16, $2	# U :
-
-	andnot  $16, 7, $16	# E :
-	or      $2, $1, $1	# E :
-	cmpbge  $31, $1, $2	# E : bits set iff byte == 0
-	bne     $2, $found	# U :
-
-$loop:	ldq     $1, 8($16)	# L :
-	addq    $16, 8, $16	# E :
-	cmpbge  $31, $1, $2	# E :
-	beq     $2, $loop	# U :
-
-$found:	cttz	$2, $3		# U0 :
-	addq	$16, $3, $16	# E :
-	/* Now do the append.  */
-	mov	$26, $23	# E :
-	br	__stxcpy	# L0 :
-
-	.end strcat
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev67-strchr.S b/ANDROID_3.4.5/arch/alpha/lib/ev67-strchr.S
deleted file mode 100644
index fbb7b4ff..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev67-strchr.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strchr.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Return the address of a given character within a null-terminated
- * string, or null if it is not found.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#include <asm/regdef.h>
-
-	.set noreorder
-	.set noat
-
-	.align 4
-	.globl strchr
-	.ent strchr
-strchr:
-	.frame sp, 0, ra
-	.prologue 0
-
-	ldq_u   t0, 0(a0)	# L : load first quadword Latency=3
-	and	a1, 0xff, t3	# E : 00000000000000ch
-	insbl	a1, 1, t5	# U : 000000000000ch00
-	insbl	a1, 7, a2	# U : ch00000000000000
-
-	insbl	t3, 6, a3	# U : 00ch000000000000
-	or	t5, t3, a1	# E : 000000000000chch
-	andnot  a0, 7, v0	# E : align our loop pointer
-	lda	t4, -1		# E : build garbage mask
-
-	mskqh	t4, a0, t4	# U : only want relevant part of first quad
-	or	a2, a3, a2	# E : chch000000000000
-	inswl	a1, 2, t5	# E : 00000000chch0000
-	inswl	a1, 4, a3	# E : 0000chch00000000
-
-	or	a1, a2, a1	# E : chch00000000chch
-	or	a3, t5, t5	# E : 0000chchchch0000
-	cmpbge  zero, t0, t2	# E : bits set iff byte == zero
-	cmpbge	zero, t4, t4	# E : bits set iff byte is garbage
-
-	/* This quad is _very_ serialized.  Lots of stalling happens */
-	or	t5, a1, a1	# E : chchchchchchchch
-	xor	t0, a1, t1	# E : make bytes == c zero
-	cmpbge  zero, t1, t3	# E : bits set iff byte == c
-	or	t2, t3, t0	# E : bits set iff char match or zero match
-
-	andnot	t0, t4, t0	# E : clear garbage bits
-	cttz	t0, a2		# U0 : speculative (in case we get a match)
-	nop			# E :
-	bne	t0, $found	# U :
-
-	/*
-	 * Yuk.  This loop is going to stall like crazy waiting for the
-	 * data to be loaded.  Not much can be done about it unless it's
-	 * unrolled multiple times - is that safe to do in kernel space?
-	 * Or would exception handling recovery code do the trick here?
-	 */
-$loop:	ldq	t0, 8(v0)	# L : Latency=3
-	addq	v0, 8, v0	# E :
-	xor	t0, a1, t1	# E :
-	cmpbge	zero, t0, t2	# E : bits set iff byte == 0
-
-	cmpbge	zero, t1, t3	# E : bits set iff byte == c
-	or	t2, t3, t0	# E :
-	cttz	t3, a2		# U0 : speculative (in case we get a match)
-	beq	t0, $loop	# U :
-
-$found:	negq    t0, t1		# E : clear all but least set bit
-	and     t0, t1, t0	# E :
-	and	t0, t3, t1	# E : bit set iff byte was the char
-	addq	v0, a2, v0	# E : Add in the bit number from above
-
-	cmoveq	t1, $31, v0	# E : Two mapping slots, latency = 2
-	nop
-	nop
-	ret			# L0 :
-
-	.end strchr
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev67-strlen.S b/ANDROID_3.4.5/arch/alpha/lib/ev67-strlen.S
deleted file mode 100644
index 50392807..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev67-strlen.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strlen.S
- * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Finds length of a 0-terminated string.  Optimized for the
- * Alpha architecture:
- *
- *	- memory accessed as aligned quadwords only
- *	- uses bcmpge to compare 8 bytes in parallel
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- */
-
-	.set noreorder
-	.set noat
-
-	.globl	strlen
-	.ent	strlen
-	.align 4
-strlen:
-	ldq_u	$1, 0($16)	# L : load first quadword ($16  may be misaligned)
-	lda	$2, -1($31)	# E :
-	insqh	$2, $16, $2	# U :
-	andnot	$16, 7, $0	# E :
-
-	or	$2, $1, $1	# E :
-	cmpbge	$31, $1, $2	# E : $2  <- bitmask: bit i == 1 <==> i-th byte == 0
-	nop			# E :
-	bne	$2, $found	# U :
-
-$loop:	ldq	$1, 8($0)	# L :
-	addq	$0, 8, $0	# E : addr += 8
-	cmpbge	$31, $1, $2	# E :
-	beq	$2, $loop	# U :
-
-$found:
-	cttz	$2, $3		# U0 :
-	addq	$0, $3, $0	# E :
-	subq	$0, $16, $0	# E :
-	ret	$31, ($26)	# L0 :
-
-	.end	strlen
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev67-strlen_user.S b/ANDROID_3.4.5/arch/alpha/lib/ev67-strlen_user.S
deleted file mode 100644
index 57e0d77b..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev67-strlen_user.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strlen_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com>
- *
- * Return the length of the string including the NULL terminator
- * (strlen+1) or zero if an error occurred.
- *
- * In places where it is critical to limit the processing time,
- * and the data is not trusted, strnlen_user() should be used.
- * It will return a value greater than its second argument if
- * that limit would be exceeded. This implementation is allowed
- * to access memory beyond the limit, but will not cross a page
- * boundary when doing so.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *      Compiler Writer's Guide for the Alpha 21264
- *      abbreviated as 'CWG' in other comments here
- *      ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *      E       - either cluster
- *      U       - upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *      L       - lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda v0, $exception-99b(zero);	\
-	.previous
-
-
-	.set noreorder
-	.set noat
-	.text
-
-	.globl __strlen_user
-	.ent __strlen_user
-	.frame sp, 0, ra
-
-	.align 4
-__strlen_user:
-	ldah	a1, 32767(zero)	# do not use plain strlen_user() for strings
-				# that might be almost 2 GB long; you should
-				# be using strnlen_user() instead
-	nop
-	nop
-	nop
-
-	.globl __strnlen_user
-
-	.align 4
-__strnlen_user:
-	.prologue 0
-	EX( ldq_u t0, 0(a0) )	# L : load first quadword (a0 may be misaligned)
-	lda     t1, -1(zero)	# E :
-
-	insqh   t1, a0, t1	# U :
-	andnot  a0, 7, v0	# E :
-	or      t1, t0, t0	# E :
-	subq	a0, 1, a0	# E : get our +1 for the return 
-
-	cmpbge  zero, t0, t1	# E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0
-	subq	a1, 7, t2	# E :
-	subq	a0, v0, t0	# E :
-	bne     t1, $found	# U :
-
-	addq	t2, t0, t2	# E :
-	addq	a1, 1, a1	# E :
-	nop			# E :
-	nop			# E :
-
-	.align 4
-$loop:	ble	t2, $limit	# U :
-	EX( ldq t0, 8(v0) )	# L :
-	nop			# E :
-	nop			# E :
-
-	cmpbge  zero, t0, t1	# E :
-	subq	t2, 8, t2	# E :
-	addq    v0, 8, v0	# E : addr += 8
-	beq     t1, $loop	# U :
-
-$found: cttz	t1, t2		# U0 :
-	addq	v0, t2, v0	# E :
-	subq    v0, a0, v0	# E :
-	ret			# L0 :
-
-$exception:
-	nop
-	nop
-	nop
-	ret
-
-	.align 4		# currently redundant
-$limit:
-	nop
-	nop
-	subq	a1, t2, v0
-	ret
-
-	.end __strlen_user
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev67-strncat.S b/ANDROID_3.4.5/arch/alpha/lib/ev67-strncat.S
deleted file mode 100644
index 4ae716cd..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev67-strncat.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strncat.S
- * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com>
- *
- * Append no more than COUNT characters from the null-terminated string SRC
- * to the null-terminated string DST.  Always null-terminate the new DST.
- *
- * This differs slightly from the semantics in libc in that we never write
- * past count, whereas libc may write to count+1.  This follows the generic
- * implementation in lib/string.c and is, IMHO, more sensible.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-
-	.text
-
-	.align 4
-	.globl strncat
-	.ent strncat
-strncat:
-	.frame $30, 0, $26
-	.prologue 0
-
-	mov	$16, $0		# set up return value
-	beq	$18, $zerocount	# U :
-	/* Find the end of the string.  */
-	ldq_u   $1, 0($16)	# L : load first quadword ($16 may be misaligned)
-	lda     $2, -1($31)	# E :
-
-	insqh   $2, $0, $2	# U :
-	andnot  $16, 7, $16	# E :
-	nop			# E :
-	or      $2, $1, $1	# E :
-
-	nop			# E :
-	nop			# E :
-	cmpbge  $31, $1, $2	# E : bits set iff byte == 0
-	bne     $2, $found	# U :
-
-$loop:	ldq     $1, 8($16)	# L :
-	addq    $16, 8, $16	# E :
-	cmpbge  $31, $1, $2	# E :
-	beq     $2, $loop	# U :
-
-$found:	cttz	$2, $3		# U0 :
-	addq	$16, $3, $16	# E :
-	nop			# E :
-	bsr	$23, __stxncpy	# L0 :/* Now do the append.  */
-
-	/* Worry about the null termination.  */
-
-	zapnot	$1, $27, $2	# U : was last byte a null?
-	cmplt	$27, $24, $5	# E : did we fill the buffer completely?
-	bne	$2, 0f		# U :
-	ret			# L0 :
-
-0:	or	$5, $18, $2	# E :
-	nop
-	bne	$2, 2f		# U :
-	and	$24, 0x80, $3	# E : no zero next byte
-
-	nop			# E :
-	bne	$3, 1f		# U :
-	/* Here there are bytes left in the current word.  Clear one.  */
-	addq	$24, $24, $24	# E : end-of-count bit <<= 1
-	nop			# E :
-
-2:	zap	$1, $24, $1	# U :
-	nop			# E :
-	stq_u	$1, 0($16)	# L :
-	ret			# L0 :
-
-1:	/* Here we must clear the first byte of the next DST word */
-	stb	$31, 8($16)	# L :
-	nop			# E :
-	nop			# E :
-	ret			# L0 :
-
-$zerocount:
-	nop			# E :
-	nop			# E :
-	nop			# E :
-	ret			# L0 :
-
-	.end strncat
diff --git a/ANDROID_3.4.5/arch/alpha/lib/ev67-strrchr.S b/ANDROID_3.4.5/arch/alpha/lib/ev67-strrchr.S
deleted file mode 100644
index dd0d8c6b..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/ev67-strrchr.S
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strrchr.S
- * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Finds length of a 0-terminated string.  Optimized for the
- * Alpha architecture:
- *
- *	- memory accessed as aligned quadwords only
- *	- uses bcmpge to compare 8 bytes in parallel
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- */
-
-
-#include <asm/regdef.h>
-
-	.set noreorder
-	.set noat
-
-	.align 4
-	.ent strrchr
-	.globl strrchr
-strrchr:
-	.frame sp, 0, ra
-	.prologue 0
-
-	and	a1, 0xff, t2	# E : 00000000000000ch
-	insbl	a1, 1, t4	# U : 000000000000ch00
-	insbl	a1, 2, t5	# U : 0000000000ch0000
-	ldq_u   t0, 0(a0)	# L : load first quadword Latency=3
-
-	mov	zero, t6	# E : t6 is last match aligned addr
-	or	t2, t4, a1	# E : 000000000000chch
-	sll	t5, 8, t3	# U : 00000000ch000000
-	mov	zero, t8	# E : t8 is last match byte compare mask
-
-	andnot  a0, 7, v0	# E : align source addr
-	or	t5, t3, t3	# E : 00000000chch0000
-	sll	a1, 32, t2	# U : 0000chch00000000
-	sll	a1, 48, t4	# U : chch000000000000
-
-	or	t4, a1, a1	# E : chch00000000chch
-	or	t2, t3, t2	# E : 0000chchchch0000
-	or	a1, t2, a1	# E : chchchchchchchch
-	lda	t5, -1		# E : build garbage mask
-
-	cmpbge  zero, t0, t1	# E : bits set iff byte == zero
-	mskqh	t5, a0, t4	# E : Complete garbage mask
-	xor	t0, a1, t2	# E : make bytes == c zero
-	cmpbge	zero, t4, t4	# E : bits set iff byte is garbage
-
-	cmpbge  zero, t2, t3	# E : bits set iff byte == c
-	andnot	t1, t4, t1	# E : clear garbage from null test
-	andnot	t3, t4, t3	# E : clear garbage from char test
-	bne	t1, $eos	# U : did we already hit the terminator?
-
-	/* Character search main loop */
-$loop:
-	ldq	t0, 8(v0)	# L : load next quadword
-	cmovne	t3, v0, t6	# E : save previous comparisons match
-	nop			#   : Latency=2, extra map slot (keep nop with cmov)
-	nop
-
-	cmovne	t3, t3, t8	# E : Latency=2, extra map slot
-	nop			#   : keep with cmovne
-	addq	v0, 8, v0	# E :
-	xor	t0, a1, t2	# E :
-
-	cmpbge	zero, t0, t1	# E : bits set iff byte == zero
-	cmpbge	zero, t2, t3	# E : bits set iff byte == c
-	beq	t1, $loop	# U : if we havnt seen a null, loop
-	nop
-
-	/* Mask out character matches after terminator */
-$eos:
-	negq	t1, t4		# E : isolate first null byte match
-	and	t1, t4, t4	# E :
-	subq	t4, 1, t5	# E : build a mask of the bytes up to...
-	or	t4, t5, t4	# E : ... and including the null
-
-	and	t3, t4, t3	# E : mask out char matches after null
-	cmovne	t3, t3, t8	# E : save it, if match found Latency=2, extra map slot
-	nop			#   : Keep with cmovne
-	nop
-
-	cmovne	t3, v0, t6	# E :
-	nop			#   : Keep with cmovne
-	/* Locate the address of the last matched character */
-	ctlz	t8, t2		# U0 : Latency=3 (0x40 for t8=0)
-	nop
-
-	cmoveq	t8, 0x3f, t2	# E : Compensate for case when no match is seen
-	nop			# E : hide the cmov latency (2) behind ctlz latency
-	lda	t5, 0x3f($31)	# E :
-	subq	t5, t2, t5	# E : Normalize leading zero count
-
-	addq	t6, t5, v0	# E : and add to quadword address
-	ret			# L0 : Latency=3
-	nop
-	nop
-
-	.end strrchr
diff --git a/ANDROID_3.4.5/arch/alpha/lib/fls.c b/ANDROID_3.4.5/arch/alpha/lib/fls.c
deleted file mode 100644
index ddd048c0..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/fls.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* 
- * arch/alpha/lib/fls.c
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-
-/* This is fls(x)-1, except zero is held to zero.  This allows most
-   efficient input into extbl, plus it allows easy handling of fls(0)=0.  */
-
-const unsigned char __flsm1_tab[256] = 
-{
-  0,
-  0,
-  1, 1,
-  2, 2, 2, 2,
-  3, 3, 3, 3, 3, 3, 3, 3,
-  4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
-
-  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
-  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
-
-  6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-  6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-  6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-  6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-  7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-};
-
-EXPORT_SYMBOL(__flsm1_tab);
diff --git a/ANDROID_3.4.5/arch/alpha/lib/fpreg.c b/ANDROID_3.4.5/arch/alpha/lib/fpreg.c
deleted file mode 100644
index 05017ba3..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/fpreg.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/alpha/lib/fpreg.c
- *
- * (C) Copyright 1998 Linus Torvalds
- */
-
-#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-#define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
-#else
-#define STT(reg,val)  asm volatile ("stt $f"#reg",%0" : "=m"(val));
-#endif
-
-unsigned long
-alpha_read_fp_reg (unsigned long reg)
-{
-	unsigned long val;
-
-	switch (reg) {
-	      case  0: STT( 0, val); break;
-	      case  1: STT( 1, val); break;
-	      case  2: STT( 2, val); break;
-	      case  3: STT( 3, val); break;
-	      case  4: STT( 4, val); break;
-	      case  5: STT( 5, val); break;
-	      case  6: STT( 6, val); break;
-	      case  7: STT( 7, val); break;
-	      case  8: STT( 8, val); break;
-	      case  9: STT( 9, val); break;
-	      case 10: STT(10, val); break;
-	      case 11: STT(11, val); break;
-	      case 12: STT(12, val); break;
-	      case 13: STT(13, val); break;
-	      case 14: STT(14, val); break;
-	      case 15: STT(15, val); break;
-	      case 16: STT(16, val); break;
-	      case 17: STT(17, val); break;
-	      case 18: STT(18, val); break;
-	      case 19: STT(19, val); break;
-	      case 20: STT(20, val); break;
-	      case 21: STT(21, val); break;
-	      case 22: STT(22, val); break;
-	      case 23: STT(23, val); break;
-	      case 24: STT(24, val); break;
-	      case 25: STT(25, val); break;
-	      case 26: STT(26, val); break;
-	      case 27: STT(27, val); break;
-	      case 28: STT(28, val); break;
-	      case 29: STT(29, val); break;
-	      case 30: STT(30, val); break;
-	      case 31: STT(31, val); break;
-	      default: return 0;
-	}
-	return val;
-}
-
-#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-#define LDT(reg,val)  asm volatile ("itoft %0,$f"#reg : : "r"(val));
-#else
-#define LDT(reg,val)  asm volatile ("ldt $f"#reg",%0" : : "m"(val));
-#endif
-
-void
-alpha_write_fp_reg (unsigned long reg, unsigned long val)
-{
-	switch (reg) {
-	      case  0: LDT( 0, val); break;
-	      case  1: LDT( 1, val); break;
-	      case  2: LDT( 2, val); break;
-	      case  3: LDT( 3, val); break;
-	      case  4: LDT( 4, val); break;
-	      case  5: LDT( 5, val); break;
-	      case  6: LDT( 6, val); break;
-	      case  7: LDT( 7, val); break;
-	      case  8: LDT( 8, val); break;
-	      case  9: LDT( 9, val); break;
-	      case 10: LDT(10, val); break;
-	      case 11: LDT(11, val); break;
-	      case 12: LDT(12, val); break;
-	      case 13: LDT(13, val); break;
-	      case 14: LDT(14, val); break;
-	      case 15: LDT(15, val); break;
-	      case 16: LDT(16, val); break;
-	      case 17: LDT(17, val); break;
-	      case 18: LDT(18, val); break;
-	      case 19: LDT(19, val); break;
-	      case 20: LDT(20, val); break;
-	      case 21: LDT(21, val); break;
-	      case 22: LDT(22, val); break;
-	      case 23: LDT(23, val); break;
-	      case 24: LDT(24, val); break;
-	      case 25: LDT(25, val); break;
-	      case 26: LDT(26, val); break;
-	      case 27: LDT(27, val); break;
-	      case 28: LDT(28, val); break;
-	      case 29: LDT(29, val); break;
-	      case 30: LDT(30, val); break;
-	      case 31: LDT(31, val); break;
-	}
-}
-
-#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-#define STS(reg,val)  asm volatile ("ftois $f"#reg",%0" : "=r"(val));
-#else
-#define STS(reg,val)  asm volatile ("sts $f"#reg",%0" : "=m"(val));
-#endif
-
-unsigned long
-alpha_read_fp_reg_s (unsigned long reg)
-{
-	unsigned long val;
-
-	switch (reg) {
-	      case  0: STS( 0, val); break;
-	      case  1: STS( 1, val); break;
-	      case  2: STS( 2, val); break;
-	      case  3: STS( 3, val); break;
-	      case  4: STS( 4, val); break;
-	      case  5: STS( 5, val); break;
-	      case  6: STS( 6, val); break;
-	      case  7: STS( 7, val); break;
-	      case  8: STS( 8, val); break;
-	      case  9: STS( 9, val); break;
-	      case 10: STS(10, val); break;
-	      case 11: STS(11, val); break;
-	      case 12: STS(12, val); break;
-	      case 13: STS(13, val); break;
-	      case 14: STS(14, val); break;
-	      case 15: STS(15, val); break;
-	      case 16: STS(16, val); break;
-	      case 17: STS(17, val); break;
-	      case 18: STS(18, val); break;
-	      case 19: STS(19, val); break;
-	      case 20: STS(20, val); break;
-	      case 21: STS(21, val); break;
-	      case 22: STS(22, val); break;
-	      case 23: STS(23, val); break;
-	      case 24: STS(24, val); break;
-	      case 25: STS(25, val); break;
-	      case 26: STS(26, val); break;
-	      case 27: STS(27, val); break;
-	      case 28: STS(28, val); break;
-	      case 29: STS(29, val); break;
-	      case 30: STS(30, val); break;
-	      case 31: STS(31, val); break;
-	      default: return 0;
-	}
-	return val;
-}
-
-#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-#define LDS(reg,val)  asm volatile ("itofs %0,$f"#reg : : "r"(val));
-#else
-#define LDS(reg,val)  asm volatile ("lds $f"#reg",%0" : : "m"(val));
-#endif
-
-void
-alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
-{
-	switch (reg) {
-	      case  0: LDS( 0, val); break;
-	      case  1: LDS( 1, val); break;
-	      case  2: LDS( 2, val); break;
-	      case  3: LDS( 3, val); break;
-	      case  4: LDS( 4, val); break;
-	      case  5: LDS( 5, val); break;
-	      case  6: LDS( 6, val); break;
-	      case  7: LDS( 7, val); break;
-	      case  8: LDS( 8, val); break;
-	      case  9: LDS( 9, val); break;
-	      case 10: LDS(10, val); break;
-	      case 11: LDS(11, val); break;
-	      case 12: LDS(12, val); break;
-	      case 13: LDS(13, val); break;
-	      case 14: LDS(14, val); break;
-	      case 15: LDS(15, val); break;
-	      case 16: LDS(16, val); break;
-	      case 17: LDS(17, val); break;
-	      case 18: LDS(18, val); break;
-	      case 19: LDS(19, val); break;
-	      case 20: LDS(20, val); break;
-	      case 21: LDS(21, val); break;
-	      case 22: LDS(22, val); break;
-	      case 23: LDS(23, val); break;
-	      case 24: LDS(24, val); break;
-	      case 25: LDS(25, val); break;
-	      case 26: LDS(26, val); break;
-	      case 27: LDS(27, val); break;
-	      case 28: LDS(28, val); break;
-	      case 29: LDS(29, val); break;
-	      case 30: LDS(30, val); break;
-	      case 31: LDS(31, val); break;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/memchr.S b/ANDROID_3.4.5/arch/alpha/lib/memchr.S
deleted file mode 100644
index 14427eeb..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/memchr.S
+++ /dev/null
@@ -1,164 +0,0 @@
-/* Copyright (C) 1996 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by David Mosberger (davidm@cs.arizona.edu).
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Finds characters in a memory area.  Optimized for the Alpha:
-
-      - memory accessed as aligned quadwords only
-      - uses cmpbge to compare 8 bytes in parallel
-      - does binary search to find 0 byte in last
-        quadword (HAKMEM needed 12 instructions to
-        do this instead of the 9 instructions that
-        binary search needs).
-
-For correctness consider that:
-
-      - only minimum number of quadwords may be accessed
-      - the third argument is an unsigned long
-*/
-
-        .set noreorder
-        .set noat
-
-	.globl memchr
-	.ent memchr
-memchr:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	# Hack -- if someone passes in (size_t)-1, hoping to just
-	# search til the end of the address space, we will overflow
-	# below when we find the address of the last byte.  Given
-	# that we will never have a 56-bit address space, cropping
-	# the length is the easiest way to avoid trouble.
-	zap	$18, 0x80, $5	#-e0	:
-
-	beq	$18, $not_found	# .. e1 :
-        ldq_u   $1, 0($16)	# e1	: load first quadword
-	insbl	$17, 1, $2	# .. e0 : $2 = 000000000000ch00
-	and	$17, 0xff, $17	#-e0    : $17 = 00000000000000ch
-	cmpult	$18, 9, $4	# .. e1 :
-	or	$2, $17, $17	# e0    : $17 = 000000000000chch
-        lda     $3, -1($31)	# .. e1 :
-	sll	$17, 16, $2	#-e0    : $2 = 00000000chch0000
-	addq	$16, $5, $5	# .. e1 :
-	or	$2, $17, $17	# e1    : $17 = 00000000chchchch
-	unop			#	:
-	sll	$17, 32, $2	#-e0    : $2 = chchchch00000000
-	or	$2, $17, $17	# e1	: $17 = chchchchchchchch
-	extql	$1, $16, $7	# e0    : 
-	beq	$4, $first_quad	# .. e1 :
-
-	ldq_u	$6, -1($5)	#-e1	: eight or less bytes to search
-	extqh	$6, $16, $6	# .. e0 :
-	mov	$16, $0		# e0	:
-	or	$7, $6, $1	# .. e1 : $1 = quadword starting at $16
-
-	# Deal with the case where at most 8 bytes remain to be searched
-	# in $1.  E.g.:
-	#	$18 = 6
-	#	$1 = ????c6c5c4c3c2c1
-$last_quad:
-	negq	$18, $6		#-e0	:
-        xor	$17, $1, $1	# .. e1 :
-	srl	$3, $6, $6	# e0    : $6 = mask of $18 bits set
-        cmpbge  $31, $1, $2	# .. e1 :
-	and	$2, $6, $2	#-e0	:
-        beq     $2, $not_found	# .. e1 :
-
-$found_it:
-	# Now, determine which byte matched:
-        negq    $2, $3		# e0	:
-        and     $2, $3, $2	# e1	:
-
-        and     $2, 0x0f, $1	#-e0	:
-        addq    $0, 4, $3	# .. e1 :
-        cmoveq  $1, $3, $0	# e0	:
-
-        addq    $0, 2, $3	# .. e1 :
-        and     $2, 0x33, $1	#-e0	:
-        cmoveq  $1, $3, $0	# .. e1 :
-
-        and     $2, 0x55, $1	# e0	:
-        addq    $0, 1, $3	# .. e1 :
-        cmoveq  $1, $3, $0	#-e0	:
-
-$done:	ret			# .. e1 :
-
-	# Deal with the case where $18 > 8 bytes remain to be
-	# searched.  $16 may not be aligned.
-	.align 4
-$first_quad:
-	andnot	$16, 0x7, $0	#-e1	:
-        insqh   $3, $16, $2	# .. e0	: $2 = 0000ffffffffffff ($16<0:2> ff)
-        xor	$1, $17, $1	# e0	:
-	or	$1, $2, $1	# e1	: $1 = ====ffffffffffff
-        cmpbge  $31, $1, $2	#-e0	:
-        bne     $2, $found_it	# .. e1 :
-
-	# At least one byte left to process.
-
-	ldq	$1, 8($0)	# e0	:
-	subq	$5, 1, $18	# .. e1 :
-	addq	$0, 8, $0	#-e0	:
-
-	# Make $18 point to last quad to be accessed (the
-	# last quad may or may not be partial).
-
-	andnot	$18, 0x7, $18	# .. e1 :
-	cmpult	$0, $18, $2	# e0	:
-	beq	$2, $final	# .. e1 :
-
-	# At least two quads remain to be accessed.
-
-	subq	$18, $0, $4	#-e0	: $4 <- nr quads to be processed
-	and	$4, 8, $4	# e1	: odd number of quads?
-	bne	$4, $odd_quad_count # e1 :
-
-	# At least three quads remain to be accessed
-
-	mov	$1, $4		# e0	: move prefetched value to correct reg
-
-	.align	4
-$unrolled_loop:
-	ldq	$1, 8($0)	#-e0	: prefetch $1
-	xor	$17, $4, $2	# .. e1 :
-	cmpbge	$31, $2, $2	# e0	:
-	bne	$2, $found_it	# .. e1 :
-
-	addq	$0, 8, $0	#-e0	:
-$odd_quad_count:
-	xor	$17, $1, $2	# .. e1 :
-	ldq	$4, 8($0)	# e0	: prefetch $4
-	cmpbge	$31, $2, $2	# .. e1 :
-	addq	$0, 8, $6	#-e0	:
-	bne	$2, $found_it	# .. e1	:
-
-	cmpult	$6, $18, $6	# e0	:
-	addq	$0, 8, $0	# .. e1 :
-	bne	$6, $unrolled_loop #-e1 :
-
-	mov	$4, $1		# e0	: move prefetched value into $1
-$final:	subq	$5, $0, $18	# .. e1	: $18 <- number of bytes left to do
-	bne	$18, $last_quad	# e1	:
-
-$not_found:
-	mov	$31, $0		#-e0	:
-	ret			# .. e1 :
-
-        .end memchr
diff --git a/ANDROID_3.4.5/arch/alpha/lib/memcpy.c b/ANDROID_3.4.5/arch/alpha/lib/memcpy.c
deleted file mode 100644
index 64083fc7..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/memcpy.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- *  linux/arch/alpha/lib/memcpy.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/*
- * This is a reasonably optimized memcpy() routine.
- */
-
-/*
- * Note that the C code is written to be optimized into good assembly. However,
- * at this point gcc is unable to sanely compile "if (n >= 0)", resulting in a
- * explicit compare against 0 (instead of just using the proper "blt reg, xx" or
- * "bge reg, xx"). I hope alpha-gcc will be fixed to notice this eventually..
- */
-
-#include <linux/types.h>
-
-/*
- * This should be done in one go with ldq_u*2/mask/stq_u. Do it
- * with a macro so that we can fix it up later..
- */
-#define ALIGN_DEST_TO8_UP(d,s,n) \
-	while (d & 7) { \
-		if (n <= 0) return; \
-		n--; \
-		*(char *) d = *(char *) s; \
-		d++; s++; \
-	}
-#define ALIGN_DEST_TO8_DN(d,s,n) \
-	while (d & 7) { \
-		if (n <= 0) return; \
-		n--; \
-		d--; s--; \
-		*(char *) d = *(char *) s; \
-	}
-
-/*
- * This should similarly be done with ldq_u*2/mask/stq. The destination
- * is aligned, but we don't fill in a full quad-word
- */
-#define DO_REST_UP(d,s,n) \
-	while (n > 0) { \
-		n--; \
-		*(char *) d = *(char *) s; \
-		d++; s++; \
-	}
-#define DO_REST_DN(d,s,n) \
-	while (n > 0) { \
-		n--; \
-		d--; s--; \
-		*(char *) d = *(char *) s; \
-	}
-
-/*
- * This should be done with ldq/mask/stq. The source and destination are
- * aligned, but we don't fill in a full quad-word
- */
-#define DO_REST_ALIGNED_UP(d,s,n) DO_REST_UP(d,s,n)
-#define DO_REST_ALIGNED_DN(d,s,n) DO_REST_DN(d,s,n)
-
-/*
- * This does unaligned memory copies. We want to avoid storing to
- * an unaligned address, as that would do a read-modify-write cycle.
- * We also want to avoid double-reading the unaligned reads.
- *
- * Note the ordering to try to avoid load (and address generation) latencies.
- */
-static inline void __memcpy_unaligned_up (unsigned long d, unsigned long s,
-					  long n)
-{
-	ALIGN_DEST_TO8_UP(d,s,n);
-	n -= 8;			/* to avoid compare against 8 in the loop */
-	if (n >= 0) {
-		unsigned long low_word, high_word;
-		__asm__("ldq_u %0,%1":"=r" (low_word):"m" (*(unsigned long *) s));
-		do {
-			unsigned long tmp;
-			__asm__("ldq_u %0,%1":"=r" (high_word):"m" (*(unsigned long *)(s+8)));
-			n -= 8;
-			__asm__("extql %1,%2,%0"
-				:"=r" (low_word)
-				:"r" (low_word), "r" (s));
-			__asm__("extqh %1,%2,%0"
-				:"=r" (tmp)
-				:"r" (high_word), "r" (s));
-			s += 8;
-			*(unsigned long *) d = low_word | tmp;
-			d += 8;
-			low_word = high_word;
-		} while (n >= 0);
-	}
-	n += 8;
-	DO_REST_UP(d,s,n);
-}
-
-static inline void __memcpy_unaligned_dn (unsigned long d, unsigned long s,
-					  long n)
-{
-	/* I don't understand AXP assembler well enough for this. -Tim */
-	s += n;
-	d += n;
-	while (n--)
-		* (char *) --d = * (char *) --s;
-}
-
-/*
- * Hmm.. Strange. The __asm__ here is there to make gcc use an integer register
- * for the load-store. I don't know why, but it would seem that using a floating
- * point register for the move seems to slow things down (very small difference,
- * though).
- *
- * Note the ordering to try to avoid load (and address generation) latencies.
- */
-static inline void __memcpy_aligned_up (unsigned long d, unsigned long s,
-					long n)
-{
-	ALIGN_DEST_TO8_UP(d,s,n);
-	n -= 8;
-	while (n >= 0) {
-		unsigned long tmp;
-		__asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s));
-		n -= 8;
-		s += 8;
-		*(unsigned long *) d = tmp;
-		d += 8;
-	}
-	n += 8;
-	DO_REST_ALIGNED_UP(d,s,n);
-}
-static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
-					long n)
-{
-	s += n;
-	d += n;
-	ALIGN_DEST_TO8_DN(d,s,n);
-	n -= 8;
-	while (n >= 0) {
-		unsigned long tmp;
-		s -= 8;
-		__asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s));
-		n -= 8;
-		d -= 8;
-		*(unsigned long *) d = tmp;
-	}
-	n += 8;
-	DO_REST_ALIGNED_DN(d,s,n);
-}
-
-void * memcpy(void * dest, const void *src, size_t n)
-{
-	if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
-		__memcpy_aligned_up ((unsigned long) dest, (unsigned long) src,
-				     n);
-		return dest;
-	}
-	__memcpy_unaligned_up ((unsigned long) dest, (unsigned long) src, n);
-	return dest;
-}
-
-/* For backward modules compatibility, define __memcpy.  */
-asm("__memcpy = memcpy; .globl __memcpy");
diff --git a/ANDROID_3.4.5/arch/alpha/lib/memmove.S b/ANDROID_3.4.5/arch/alpha/lib/memmove.S
deleted file mode 100644
index eb3b6e02..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/memmove.S
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * arch/alpha/lib/memmove.S
- *
- * Barely optimized memmove routine for Alpha EV5.
- *
- * This is hand-massaged output from the original memcpy.c.  We defer to
- * memcpy whenever possible; the backwards copy loops are not unrolled.
- */
-        
-	.set noat
-	.set noreorder
-	.text
-
-	.align 4
-	.globl memmove
-	.ent memmove
-memmove:
-	ldgp $29, 0($27)
-	unop
-	nop
-	.prologue 1
-
-	addq $16,$18,$4
-	addq $17,$18,$5
-	cmpule $4,$17,$1		/*  dest + n <= src  */
-	cmpule $5,$16,$2		/*  dest >= src + n  */
-
-	bis $1,$2,$1
-	mov $16,$0
-	xor $16,$17,$2
-	bne $1,memcpy			!samegp
-
-	and $2,7,$2			/* Test for src/dest co-alignment.  */
-	and $16,7,$1
-	cmpule $16,$17,$3
-	bne $3,$memmove_up		/* dest < src */
-
-	and $4,7,$1
-	bne $2,$misaligned_dn
-	unop
-	beq $1,$skip_aligned_byte_loop_head_dn
-
-$aligned_byte_loop_head_dn:
-	lda $4,-1($4)
-	lda $5,-1($5)
-	unop
-	ble $18,$egress
-
-	ldq_u $3,0($5)
-	ldq_u $2,0($4)
-	lda $18,-1($18)
-	extbl $3,$5,$1
-
-	insbl $1,$4,$1
-	mskbl $2,$4,$2
-	bis $1,$2,$1
-	and $4,7,$6
-
-	stq_u $1,0($4)
-	bne $6,$aligned_byte_loop_head_dn
-
-$skip_aligned_byte_loop_head_dn:
-	lda $18,-8($18)
-	blt $18,$skip_aligned_word_loop_dn
-
-$aligned_word_loop_dn:
-	ldq $1,-8($5)
-	nop
-	lda $5,-8($5)
-	lda $18,-8($18)
-
-	stq $1,-8($4)
-	nop
-	lda $4,-8($4)
-	bge $18,$aligned_word_loop_dn
-
-$skip_aligned_word_loop_dn:
-	lda $18,8($18)
-	bgt $18,$byte_loop_tail_dn
-	unop
-	ret $31,($26),1
-
-	.align 4
-$misaligned_dn:
-	nop
-	fnop
-	unop
-	beq $18,$egress
-
-$byte_loop_tail_dn:
-	ldq_u $3,-1($5)
-	ldq_u $2,-1($4)
-	lda $5,-1($5)
-	lda $4,-1($4)
-
-	lda $18,-1($18)
-	extbl $3,$5,$1
-	insbl $1,$4,$1
-	mskbl $2,$4,$2
-
-	bis $1,$2,$1
-	stq_u $1,0($4)
-	bgt $18,$byte_loop_tail_dn
-	br $egress
-
-$memmove_up:
-	mov $16,$4
-	mov $17,$5
-	bne $2,$misaligned_up
-	beq $1,$skip_aligned_byte_loop_head_up
-
-$aligned_byte_loop_head_up:
-	unop
-	ble $18,$egress
-	ldq_u $3,0($5)
-	ldq_u $2,0($4)
-
-	lda $18,-1($18)
-	extbl $3,$5,$1
-	insbl $1,$4,$1
-	mskbl $2,$4,$2
-
-	bis $1,$2,$1
-	lda $5,1($5)
-	stq_u $1,0($4)
-	lda $4,1($4)
-
-	and $4,7,$6
-	bne $6,$aligned_byte_loop_head_up
-
-$skip_aligned_byte_loop_head_up:
-	lda $18,-8($18)
-	blt $18,$skip_aligned_word_loop_up
-
-$aligned_word_loop_up:
-	ldq $1,0($5)
-	nop
-	lda $5,8($5)
-	lda $18,-8($18)
-
-	stq $1,0($4)
-	nop
-	lda $4,8($4)
-	bge $18,$aligned_word_loop_up
-
-$skip_aligned_word_loop_up:
-	lda $18,8($18)
-	bgt $18,$byte_loop_tail_up
-	unop
-	ret $31,($26),1
-
-	.align 4
-$misaligned_up:
-	nop
-	fnop
-	unop
-	beq $18,$egress
-
-$byte_loop_tail_up:
-	ldq_u $3,0($5)
-	ldq_u $2,0($4)
-	lda $18,-1($18)
-	extbl $3,$5,$1
-
-	insbl $1,$4,$1
-	mskbl $2,$4,$2
-	bis $1,$2,$1
-	stq_u $1,0($4)
-
-	lda $5,1($5)
-	lda $4,1($4)
-	nop
-	bgt $18,$byte_loop_tail_up
-
-$egress:
-	ret $31,($26),1
-	nop
-	nop
-	nop
-
-	.end memmove
diff --git a/ANDROID_3.4.5/arch/alpha/lib/memset.S b/ANDROID_3.4.5/arch/alpha/lib/memset.S
deleted file mode 100644
index 311b8cfc..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/memset.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/alpha/lib/memset.S
- *
- * This is an efficient (and small) implementation of the C library "memset()"
- * function for the alpha.
- *
- *	(C) Copyright 1996 Linus Torvalds
- *
- * This routine is "moral-ware": you are free to use it any way you wish, and
- * the only obligation I put on you is a moral one: if you make any improvements
- * to the routine, please send me your improvements for me to use similarly.
- *
- * The scheduling comments are according to the EV5 documentation (and done by 
- * hand, so they might well be incorrect, please do tell me about it..)
- */
-
-	.set noat
-	.set noreorder
-.text
-	.globl memset
-	.globl __memset
-	.globl __memsetw
-	.globl __constant_c_memset
-	.ent __memset
-.align 5
-__memset:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	and $17,255,$1		/* E1 */
-	insbl $17,1,$17		/* .. E0 */
-	bis $17,$1,$17		/* E0 (p-c latency, next cycle) */
-	sll $17,16,$1		/* E1 (p-c latency, next cycle) */
-
-	bis $17,$1,$17		/* E0 (p-c latency, next cycle) */
-	sll $17,32,$1		/* E1 (p-c latency, next cycle) */
-	bis $17,$1,$17		/* E0 (p-c latency, next cycle) */
-	ldq_u $31,0($30)	/* .. E1 */
-
-.align 5
-__constant_c_memset:
-	addq $18,$16,$6		/* E0 */
-	bis $16,$16,$0		/* .. E1 */
-	xor $16,$6,$1		/* E0 */
-	ble $18,end		/* .. E1 */
-
-	bic $1,7,$1		/* E0 */
-	beq $1,within_one_quad	/* .. E1 (note EV5 zero-latency forwarding) */
-	and $16,7,$3		/* E0 */
-	beq $3,aligned		/* .. E1 (note EV5 zero-latency forwarding) */
-
-	ldq_u $4,0($16)		/* E0 */
-	bis $16,$16,$5		/* .. E1 */
-	insql $17,$16,$2	/* E0 */
-	subq $3,8,$3		/* .. E1 */
-
-	addq $18,$3,$18		/* E0	$18 is new count ($3 is negative) */
-	mskql $4,$16,$4		/* .. E1 (and possible load stall) */
-	subq $16,$3,$16		/* E0 	$16 is new aligned destination */
-	bis $2,$4,$1		/* .. E1 */
-
-	bis $31,$31,$31		/* E0 */
-	ldq_u $31,0($30)	/* .. E1 */
-	stq_u $1,0($5)		/* E0 */
-	bis $31,$31,$31		/* .. E1 */
-
-.align 4
-aligned:
-	sra $18,3,$3		/* E0 */
-	and $18,7,$18		/* .. E1 */
-	bis $16,$16,$5		/* E0 */
-	beq $3,no_quad		/* .. E1 */
-
-.align 3
-loop:
-	stq $17,0($5)		/* E0 */
-	subq $3,1,$3		/* .. E1 */
-	addq $5,8,$5		/* E0 */
-	bne $3,loop		/* .. E1 */
-
-no_quad:
-	bis $31,$31,$31		/* E0 */
-	beq $18,end		/* .. E1 */
-	ldq $7,0($5)		/* E0 */
-	mskqh $7,$6,$2		/* .. E1 (and load stall) */
-
-	insqh $17,$6,$4		/* E0 */
-	bis $2,$4,$1		/* .. E1 */
-	stq $1,0($5)		/* E0 */
-	ret $31,($26),1		/* .. E1 */
-
-.align 3
-within_one_quad:
-	ldq_u $1,0($16)		/* E0 */
-	insql $17,$16,$2	/* E1 */
-	mskql $1,$16,$4		/* E0 (after load stall) */
-	bis $2,$4,$2		/* E0 */
-
-	mskql $2,$6,$4		/* E0 */
-	mskqh $1,$6,$2		/* .. E1 */
-	bis $2,$4,$1		/* E0 */
-	stq_u $1,0($16)		/* E0 */
-
-end:
-	ret $31,($26),1		/* E1 */
-	.end __memset
-
-	.align 5
-	.ent __memsetw
-__memsetw:
-	.prologue 0
-
-	inswl $17,0,$1		/* E0 */
-	inswl $17,2,$2		/* E0 */
-	inswl $17,4,$3		/* E0 */
-	or $1,$2,$1		/* .. E1 */
-	inswl $17,6,$4		/* E0 */
-	or $1,$3,$1		/* .. E1 */
-	or $1,$4,$17		/* E0 */
-	br __constant_c_memset	/* .. E1 */
-
-	.end __memsetw
-
-memset = __memset
diff --git a/ANDROID_3.4.5/arch/alpha/lib/srm_printk.c b/ANDROID_3.4.5/arch/alpha/lib/srm_printk.c
deleted file mode 100644
index 31b53c49..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/srm_printk.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *	arch/alpha/lib/srm_printk.c
- */
-
-#include <linux/kernel.h>
-#include <asm/console.h>
-
-long
-srm_printk(const char *fmt, ...)
-{
-	static char buf[1024];
-	va_list args;
-	long len, num_lf;
-	char *src, *dst;
-
-	va_start(args, fmt);
-	len = vsprintf(buf, fmt, args);
-	va_end(args);
-
-	/* count number of linefeeds in string: */
-
-	num_lf = 0;
-	for (src = buf; *src; ++src) {
-		if (*src == '\n') {
-			++num_lf;
-		}
-	}
-
-	if (num_lf) {
-		/* expand each linefeed into carriage-return/linefeed: */
-		for (dst = src + num_lf; src >= buf; ) {
-			if (*src == '\n') {
-				*dst-- = '\r';
-			}
-			*dst-- = *src--;
-		}
-	}
-
-	srm_puts(buf, num_lf+len);	
-        return len;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/srm_puts.c b/ANDROID_3.4.5/arch/alpha/lib/srm_puts.c
deleted file mode 100644
index 7b60a6f7..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/srm_puts.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *	arch/alpha/lib/srm_puts.c
- */
-
-#include <linux/string.h>
-#include <asm/console.h>
-
-long
-srm_puts(const char *str, long len)
-{
-	long remaining, written;
-
-	if (!callback_init_done)
-		return len;
-
-	for (remaining = len; remaining > 0; remaining -= written)
-	{
-		written = callback_puts(0, str, remaining);
-		written &= 0xffffffff;
-		str += written;
-	}
-	return len;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/stacktrace.c b/ANDROID_3.4.5/arch/alpha/lib/stacktrace.c
deleted file mode 100644
index 5e832161..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/stacktrace.c
+++ /dev/null
@@ -1,102 +0,0 @@
-#include <linux/kernel.h>
-
-typedef unsigned int instr;
-
-#define MAJOR_OP	0xfc000000
-#define LDA_OP		0x20000000
-#define STQ_OP		0xb4000000
-#define BR_OP		0xc0000000
-
-#define STK_ALLOC_1	0x23de8000 /* lda $30,-X($30) */
-#define STK_ALLOC_1M	0xffff8000
-#define STK_ALLOC_2	0x43c0153e /* subq $30,X,$30 */
-#define STK_ALLOC_2M	0xffe01fff
-
-#define MEM_REG		0x03e00000
-#define MEM_BASE	0x001f0000
-#define MEM_OFF		0x0000ffff
-#define MEM_OFF_SIGN	0x00008000
-#define	BASE_SP		0x001e0000
-
-#define STK_ALLOC_MATCH(INSTR)			\
-  (((INSTR) & STK_ALLOC_1M) == STK_ALLOC_1	\
-   || ((INSTR) & STK_ALLOC_2M) == STK_ALLOC_2)
-#define STK_PUSH_MATCH(INSTR) \
-  (((INSTR) & (MAJOR_OP | MEM_BASE | MEM_OFF_SIGN)) == (STQ_OP | BASE_SP))
-#define MEM_OP_OFFSET(INSTR) \
-  (((long)((INSTR) & MEM_OFF) << 48) >> 48)
-#define MEM_OP_REG(INSTR) \
-  (((INSTR) & MEM_REG) >> 22)
-
-/* Branches, jumps, PAL calls, and illegal opcodes end a basic block. */
-#define BB_END(INSTR)						\
-  (((instr)(INSTR) >= BR_OP) | ((instr)(INSTR) < LDA_OP) |	\
-   ((((instr)(INSTR) ^ 0x60000000) < 0x20000000) &		\
-    (((instr)(INSTR) & 0x0c000000) != 0)))
-
-#define IS_KERNEL_TEXT(PC) ((unsigned long)(PC) > START_ADDR)
-
-static char reg_name[][4] = {
-	"v0 ", "t0 ", "t1 ", "t2 ", "t3 ", "t4 ", "t5 ", "t6 ", "t7 ",
-	"s0 ", "s1 ", "s2 ", "s3 ", "s4 ", "s5 ", "s6 ", "a0 ", "a1 ",
-	"a2 ", "a3 ", "a4 ", "a5 ", "t8 ", "t9 ", "t10", "t11", "ra ",
-	"pv ", "at ", "gp ", "sp ", "0"
-};
-
-
-static instr *
-display_stored_regs(instr * pro_pc, unsigned char * sp)
-{
-	instr * ret_pc = 0;
-	int reg;
-	unsigned long value;
-
-	printk("Prologue [<%p>], Frame %p:\n", pro_pc, sp);
-	while (!BB_END(*pro_pc))
-		if (STK_PUSH_MATCH(*pro_pc)) {
-			reg = (*pro_pc & MEM_REG) >> 21;
-			value = *(unsigned long *)(sp + (*pro_pc & MEM_OFF));
-			if (reg == 26)
-				ret_pc = (instr *)value;
-			printk("\t\t%s / 0x%016lx\n", reg_name[reg], value);
-		}
-	return ret_pc;
-}
-
-static instr *
-seek_prologue(instr * pc)
-{
-	while (!STK_ALLOC_MATCH(*pc))
-		--pc;
-	while (!BB_END(*(pc - 1)))
-		--pc;
-	return pc;
-}
-
-static long
-stack_increment(instr * prologue_pc)
-{
-	while (!STK_ALLOC_MATCH(*prologue_pc))
-		++prologue_pc;
-
-	/* Count the bytes allocated. */
-	if ((*prologue_pc & STK_ALLOC_1M) == STK_ALLOC_1M)
-		return -(((long)(*prologue_pc) << 48) >> 48);
-	else
-		return (*prologue_pc >> 13) & 0xff;
-}
-
-void
-stacktrace(void)
-{
-	instr * ret_pc;
-	instr * prologue = (instr *)stacktrace;
-	register unsigned char * sp __asm__ ("$30");
-
-	printk("\tstack trace:\n");
-	do {
-		ret_pc = display_stored_regs(prologue, sp);
-		sp += stack_increment(prologue);
-		prologue = seek_prologue(ret_pc);
-	} while (IS_KERNEL_TEXT(ret_pc));
-}
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strcat.S b/ANDROID_3.4.5/arch/alpha/lib/strcat.S
deleted file mode 100644
index 393f5038..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strcat.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/alpha/lib/strcat.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Append a null-terminated string from SRC to DST.
- */
-
-	.text
-
-	.align 3
-	.globl strcat
-	.ent strcat
-strcat:
-	.frame $30, 0, $26
-	.prologue 0
-
-	mov	$16, $0		# set up return value
-
-	/* Find the end of the string.  */
-
-	ldq_u   $1, 0($16)	# load first quadword (a0 may be misaligned)
-	lda     $2, -1
-	insqh   $2, $16, $2
-	andnot  $16, 7, $16
-	or      $2, $1, $1
-	cmpbge  $31, $1, $2	# bits set iff byte == 0
-	bne     $2, $found
-
-$loop:	ldq     $1, 8($16)
-	addq    $16, 8, $16
-	cmpbge  $31, $1, $2
-	beq     $2, $loop
-
-$found:	negq    $2, $3		# clear all but least set bit
-	and     $2, $3, $2
-
-	and     $2, 0xf0, $3	# binary search for that set bit
-	and	$2, 0xcc, $4
-	and	$2, 0xaa, $5
-	cmovne	$3, 4, $3
-	cmovne	$4, 2, $4
-	cmovne	$5, 1, $5
-	addq	$3, $4, $3
-	addq	$16, $5, $16
-	addq	$16, $3, $16
-
-	/* Now do the append.  */
-
-	mov	$26, $23
-	br	__stxcpy
-
-	.end strcat
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strchr.S b/ANDROID_3.4.5/arch/alpha/lib/strchr.S
deleted file mode 100644
index 011a175e..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strchr.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/alpha/lib/strchr.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Return the address of a given character within a null-terminated
- * string, or null if it is not found.
- */
-
-#include <asm/regdef.h>
-
-	.set noreorder
-	.set noat
-
-	.align 3
-	.globl strchr
-	.ent strchr
-strchr:
-	.frame sp, 0, ra
-	.prologue 0
-
-	zapnot	a1, 1, a1	# e0    : zero extend the search character
-	ldq_u   t0, 0(a0)	# .. e1 : load first quadword
-	sll	a1, 8, t5	# e0    : replicate the search character
-	andnot  a0, 7, v0	# .. e1 : align our loop pointer
-	or	t5, a1, a1	# e0    :
-	lda	t4, -1		# .. e1 : build garbage mask
-	sll	a1, 16, t5	# e0    :
-	cmpbge  zero, t0, t2	# .. e1 : bits set iff byte == zero
-	mskqh	t4, a0, t4	# e0    :
-	or	t5, a1, a1	# .. e1 :
-	sll	a1, 32, t5	# e0    :
-	cmpbge	zero, t4, t4	# .. e1 : bits set iff byte is garbage
-	or	t5, a1, a1	# e0    :
-	xor	t0, a1, t1	# .. e1 : make bytes == c zero
-	cmpbge  zero, t1, t3	# e0    : bits set iff byte == c
-	or	t2, t3, t0	# e1    : bits set iff char match or zero match
-	andnot	t0, t4, t0	# e0    : clear garbage bits
-	bne	t0, $found	# .. e1 (zdb)
-
-$loop:	ldq	t0, 8(v0)	# e0    :
-	addq	v0, 8, v0	# .. e1 :
-	nop			# e0    :
-	xor	t0, a1, t1	# .. e1 (ev5 data stall)
-	cmpbge	zero, t0, t2	# e0    : bits set iff byte == 0
-	cmpbge	zero, t1, t3	# .. e1 : bits set iff byte == c
-	or	t2, t3, t0	# e0    :
-	beq	t0, $loop	# .. e1 (zdb)
-
-$found:	negq    t0, t1		# e0    : clear all but least set bit
-	and     t0, t1, t0	# e1 (stall)
-
-	and	t0, t3, t1	# e0    : bit set iff byte was the char
-	beq	t1, $retnull	# .. e1 (zdb)
-
-	and     t0, 0xf0, t2	# e0    : binary search for that set bit
-	and	t0, 0xcc, t3	# .. e1 :
-	and	t0, 0xaa, t4	# e0    :
-	cmovne	t2, 4, t2	# .. e1 :
-	cmovne	t3, 2, t3	# e0    :
-	cmovne	t4, 1, t4	# .. e1 :
-	addq	t2, t3, t2	# e0    :
-	addq	v0, t4, v0	# .. e1 :
-	addq	v0, t2, v0	# e0    :
-	ret			# .. e1 :
-
-$retnull:
-	mov	zero, v0	# e0    :
-	ret			# .. e1 :
-
-	.end strchr
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strcpy.S b/ANDROID_3.4.5/arch/alpha/lib/strcpy.S
deleted file mode 100644
index e0728e4a..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strcpy.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/alpha/lib/strcpy.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Copy a null-terminated string from SRC to DST.  Return a pointer
- * to the null-terminator in the source.
- */
-
-	.text
-
-	.align 3
-	.globl strcpy
-	.ent strcpy
-strcpy:
-	.frame $30, 0, $26
-	.prologue 0
-
-	mov	$16, $0		# set up return value
-	mov	$26, $23	# set up return address
-	unop
-	br	__stxcpy	# do the copy
-
-	.end strcpy
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strlen.S b/ANDROID_3.4.5/arch/alpha/lib/strlen.S
deleted file mode 100644
index fe63353d..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strlen.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * strlen.S (c) 1995 David Mosberger (davidm@cs.arizona.edu)
- *
- * Finds length of a 0-terminated string.  Optimized for the
- * Alpha architecture:
- *
- *	- memory accessed as aligned quadwords only
- *	- uses bcmpge to compare 8 bytes in parallel
- *	- does binary search to find 0 byte in last
- *	  quadword (HAKMEM needed 12 instructions to
- *	  do this instead of the 9 instructions that
- *	  binary search needs).
- */
-
-	.set noreorder
-	.set noat
-
-	.align 3
-
-	.globl	strlen
-	.ent	strlen
-
-strlen:
-	ldq_u	$1, 0($16)	# load first quadword ($16  may be misaligned)
-	lda	$2, -1($31)
-	insqh	$2, $16, $2
-	andnot	$16, 7, $0
-	or	$2, $1, $1
-	cmpbge	$31, $1, $2	# $2  <- bitmask: bit i == 1 <==> i-th byte == 0
-	bne	$2, found
-
-loop:	ldq	$1, 8($0)
-	addq	$0, 8, $0	# addr += 8
-	nop			# helps dual issue last two insns
-	cmpbge	$31, $1, $2
-	beq	$2, loop
-
-found:	blbs	$2, done	# make aligned case fast
-	negq	$2, $3
-	and	$2, $3, $2
-
-	and	$2, 0x0f, $1
-	addq	$0, 4, $3
-	cmoveq	$1, $3, $0
-
-	and	$2, 0x33, $1
-	addq	$0, 2, $3
-	cmoveq	$1, $3, $0
-
-	and	$2, 0x55, $1
-	addq	$0, 1, $3
-	cmoveq	$1, $3, $0
-
-done:	subq	$0, $16, $0
-	ret	$31, ($26)
-
-	.end	strlen
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strlen_user.S b/ANDROID_3.4.5/arch/alpha/lib/strlen_user.S
deleted file mode 100644
index 508a18e9..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strlen_user.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/alpha/lib/strlen_user.S
- *
- * Return the length of the string including the NUL terminator
- * (strlen+1) or zero if an error occurred.
- *
- * In places where it is critical to limit the processing time,
- * and the data is not trusted, strnlen_user() should be used.
- * It will return a value greater than its second argument if
- * that limit would be exceeded. This implementation is allowed
- * to access memory beyond the limit, but will not cross a page
- * boundary when doing so.
- */
-
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda v0, $exception-99b(zero);	\
-	.previous
-
-
-	.set noreorder
-	.set noat
-	.text
-
-	.globl __strlen_user
-	.ent __strlen_user
-	.frame sp, 0, ra
-
-	.align 3
-__strlen_user:
-	ldah	a1, 32767(zero)	# do not use plain strlen_user() for strings
-				# that might be almost 2 GB long; you should
-				# be using strnlen_user() instead
-
-	.globl __strnlen_user
-
-	.align 3
-__strnlen_user:
-	.prologue 0
-
-	EX( ldq_u t0, 0(a0) )	# load first quadword (a0 may be misaligned)
-	lda     t1, -1(zero)
-	insqh   t1, a0, t1
-	andnot  a0, 7, v0
-	or      t1, t0, t0
-	subq	a0, 1, a0	# get our +1 for the return 
-	cmpbge  zero, t0, t1	# t1 <- bitmask: bit i == 1 <==> i-th byte == 0
-	subq	a1, 7, t2
-	subq	a0, v0, t0
-	bne     t1, $found
-
-	addq	t2, t0, t2
-	addq	a1, 1, a1
-
-	.align 3
-$loop:	ble	t2, $limit
-	EX( ldq t0, 8(v0) )
-	subq	t2, 8, t2
-	addq    v0, 8, v0	# addr += 8
-	cmpbge  zero, t0, t1
-	beq     t1, $loop
-
-$found:	negq    t1, t2		# clear all but least set bit
-	and     t1, t2, t1
-
-	and     t1, 0xf0, t2	# binary search for that set bit
-	and	t1, 0xcc, t3
-	and	t1, 0xaa, t4
-	cmovne	t2, 4, t2
-	cmovne	t3, 2, t3
-	cmovne	t4, 1, t4
-	addq	t2, t3, t2
-	addq	v0, t4, v0
-	addq	v0, t2, v0
-	nop			# dual issue next two on ev4 and ev5
-	subq    v0, a0, v0
-$exception:
-	ret
-
-	.align 3		# currently redundant
-$limit:
-	subq	a1, t2, v0
-	ret
-
-	.end __strlen_user
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strncat.S b/ANDROID_3.4.5/arch/alpha/lib/strncat.S
deleted file mode 100644
index a8278163..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strncat.S
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/alpha/lib/strncat.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Append no more than COUNT characters from the null-terminated string SRC
- * to the null-terminated string DST.  Always null-terminate the new DST.
- *
- * This differs slightly from the semantics in libc in that we never write
- * past count, whereas libc may write to count+1.  This follows the generic
- * implementation in lib/string.c and is, IMHO, more sensible.
- */
-
-	.text
-
-	.align 3
-	.globl strncat
-	.ent strncat
-strncat:
-	.frame $30, 0, $26
-	.prologue 0
-
-	mov	$16, $0		# set up return value
-	beq	$18, $zerocount
-
-	/* Find the end of the string.  */
-
-	ldq_u   $1, 0($16)	# load first quadword ($16 may be misaligned)
-	lda     $2, -1($31)
-	insqh   $2, $16, $2
-	andnot  $16, 7, $16
-	or      $2, $1, $1
-	cmpbge  $31, $1, $2	# bits set iff byte == 0
-	bne     $2, $found
-
-$loop:	ldq     $1, 8($16)
-	addq    $16, 8, $16
-	cmpbge  $31, $1, $2
-	beq     $2, $loop
-
-$found:	negq    $2, $3		# clear all but least set bit
-	and     $2, $3, $2
-
-	and     $2, 0xf0, $3	# binary search for that set bit
-	and	$2, 0xcc, $4
-	and	$2, 0xaa, $5
-	cmovne	$3, 4, $3
-	cmovne	$4, 2, $4
-	cmovne	$5, 1, $5
-	addq	$3, $4, $3
-	addq	$16, $5, $16
-	addq	$16, $3, $16
-
-	/* Now do the append.  */
-
-	bsr	$23, __stxncpy
-
-	/* Worry about the null termination.  */
-
-	zapnot	$1, $27, $2	# was last byte a null?
-	bne	$2, 0f
-	ret
-
-0:	cmplt	$27, $24, $2	# did we fill the buffer completely?
-	or	$2, $18, $2
-	bne	$2, 2f
-
-	and	$24, 0x80, $2	# no zero next byte
-	bne	$2, 1f
-
-	/* Here there are bytes left in the current word.  Clear one.  */
-	addq	$24, $24, $24	# end-of-count bit <<= 1
-2:	zap	$1, $24, $1
-	stq_u	$1, 0($16)
-	ret
-
-1:	/* Here we must read the next DST word and clear the first byte.  */
-	ldq_u	$1, 8($16)
-	zap	$1, 1, $1
-	stq_u	$1, 8($16)
-
-$zerocount:
-	ret
-
-	.end strncat
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strncpy.S b/ANDROID_3.4.5/arch/alpha/lib/strncpy.S
deleted file mode 100644
index a46f7f3a..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strncpy.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/alpha/lib/strncpy.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Copy no more than COUNT bytes of the null-terminated string from
- * SRC to DST.  If SRC does not cover all of COUNT, the balance is
- * zeroed.
- *
- * Or, rather, if the kernel cared about that weird ANSI quirk.  This
- * version has cropped that bit o' nastiness as well as assuming that
- * __stxncpy is in range of a branch.
- */
-
-	.set noat
-	.set noreorder
-
-	.text
-
-	.align 4
-	.globl strncpy
-	.ent strncpy
-strncpy:
-	.frame $30, 0, $26
-	.prologue 0
-
-	mov	$16, $0		# set return value now
-	beq	$18, $zerolen
-	unop
-	bsr	$23, __stxncpy	# do the work of the copy
-
-	unop
-	bne	$18, $multiword	# do we have full words left?
-	subq	$24, 1, $3	# nope
-	subq	$27, 1, $4
-
-	or	$3, $24, $3	# clear the bits between the last
-	or	$4, $27, $4	# written byte and the last byte in COUNT
-	andnot	$3, $4, $4
-	zap	$1, $4, $1
-
-	stq_u	$1, 0($16)
-	ret
-
-	.align	4
-$multiword:
-	subq	$27, 1, $2	# clear the final bits in the prev word
-	or	$2, $27, $2
-	zapnot	$1, $2, $1
-	subq	$18, 1, $18
-
-	stq_u	$1, 0($16)
-	addq	$16, 8, $16
-	unop
-	beq	$18, 1f
-
-	nop
-	unop
-	nop
-	blbc	$18, 0f
-
-	stq_u	$31, 0($16)	# zero one word
-	subq	$18, 1, $18
-	addq	$16, 8, $16
-	beq	$18, 1f
-
-0:	stq_u	$31, 0($16)	# zero two words
-	subq	$18, 2, $18
-	stq_u	$31, 8($16)
-	addq	$16, 16, $16
-	bne	$18, 0b
-
-1:	ldq_u	$1, 0($16)	# clear the leading bits in the final word
-	subq	$24, 1, $2
-	or	$2, $24, $2
-
-	zap	$1, $2, $1
-	stq_u	$1, 0($16)
-$zerolen:
-	ret
-
-	.end	strncpy
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strncpy_from_user.S b/ANDROID_3.4.5/arch/alpha/lib/strncpy_from_user.S
deleted file mode 100644
index 73ee2116..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strncpy_from_user.S
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * arch/alpha/lib/strncpy_from_user.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Just like strncpy except in the return value:
- *
- * -EFAULT       if an exception occurs before the terminator is copied.
- * N             if the buffer filled.
- *
- * Otherwise the length of the string is returned.
- */
-
-
-#include <asm/errno.h>
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($0); 	\
-	.previous
-
-
-	.set noat
-	.set noreorder
-	.text
-
-	.globl __strncpy_from_user
-	.ent __strncpy_from_user
-	.frame $30, 0, $26
-	.prologue 0
-
-	.align 3
-$aligned:
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# e1    : build a mask against false zero
-	mskqh	t2, a1, t2	# e0    :   detection in the src word
-	mskqh	t1, a1, t3	# e0    :
-	ornot	t1, t2, t2	# .. e1 :
-	mskql	t0, a1, t0	# e0    : assemble the first output word
-	cmpbge	zero, t2, t8	# .. e1 : bits set iff null found
-	or	t0, t3, t0	# e0    :
-	beq	a2, $a_eoc	# .. e1 :
-	bne	t8, $a_eos	# .. e1 :
-
-	/* On entry to this basic block:
-	   t0 == a source word not containing a null.  */
-
-$a_loop:
-	stq_u	t0, 0(a0)	# e0    :
-	addq	a0, 8, a0	# .. e1 :
-	EX( ldq_u t0, 0(a1) )	# e0    :
-	addq	a1, 8, a1	# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t0, t8	# .. e1 (stall)
-	beq	a2, $a_eoc      # e1    :
-	beq	t8, $a_loop	# e1    :
-
-	/* Take care of the final (partial) word store.  At this point
-	   the end-of-count bit is set in t8 iff it applies.
-
-	   On entry to this basic block we have:
-	   t0 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-
-$a_eos:
-	negq	t8, t12		# e0    : find low bit set
-	and	t8, t12, t12	# e1 (stall)
-
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# e0    :
-	bne	t6, 1f		# .. e1 (zdb)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t12, t6, t8	# e0    :
-	unop			#
-	zapnot	t0, t8, t0	# e0    : clear src bytes > null
-	zap	t1, t8, t1	# .. e1 : clear dst bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)
-	br	$finish_up
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-
-	/*** The Function Entry Point ***/
-	.align 3
-__strncpy_from_user:
-	mov	a0, v0		# save the string start
-	beq	a2, $zerolength
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t1	# e0    :
-	and	a0, 7, t0	# .. e1 : find dest misalignment
-	and	t1, 7, t1	# e0    :
-	addq	a2, t0, a2	# .. e1 : bias count by dest misalignment
-	subq	a2, 1, a2	# e0    :
-	and	a2, 7, t2	# e1    :
-	srl	a2, 3, a2	# e0    : a2 = loop counter = (count - 1)/8
-	addq	zero, 1, t10	# .. e1 :
-	sll	t10, t2, t10	# e0    : t10 = bitmask of last count byte
-	bne	t1, $unaligned	# .. e1 :
-
-	/* We are co-aligned; take care of a partial first word.  */
-
-	EX( ldq_u t1, 0(a1) )	# e0    : load first src word
-	addq	a1, 8, a1	# .. e1 :
-
-	beq	t0, $aligned	# avoid loading dest word if not needed
-	ldq_u	t0, 0(a0)	# e0    :
-	br	$aligned	# .. e1 :
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 3
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	EX( ldq_u t2, 8(a1) )	# e0    : load second src word
-	addq	a1, 8, a1	# .. e1 :
-	mskql	t0, a0, t0	# e0    : mask trailing garbage in dst
-	extqh	t2, a1, t4	# e0    :
-	or	t1, t4, t1	# e1    : first aligned src word complete
-	mskqh	t1, a0, t1	# e0    : mask leading garbage in src
-	or	t0, t1, t0	# e0    : first output word complete
-	or	t0, t6, t6	# e1    : mask original data for zero test
-	cmpbge	zero, t6, t8	# e0    :
-	beq	a2, $u_eocfin	# .. e1 :
-	bne	t8, $u_final	# e1    :
-
-	lda	t6, -1			# e1    : mask out the bits we have
-	mskql	t6, a1, t6		# e0    :   already seen
-	stq_u	t0, 0(a0)		# e0    : store first output word
-	or      t6, t2, t2		# .. e1 :
-	cmpbge	zero, t2, t8		# e0    : find nulls in second partial
-	addq	a0, 8, a0		# .. e1 :
-	subq	a2, 1, a2		# e0    :
-	bne	t8, $u_late_head_exit	# .. e1 :
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# e0    : position hi-bits of lo word
-	EX( ldq_u t2, 8(a1) )	# .. e1 : read next high-order source word
-	addq	a1, 8, a1	# e0    :
-	cmpbge	zero, t2, t8	# e1 (stall)
-	beq	a2, $u_eoc	# e1    :
-	bne	t8, $u_eos	# e1    :
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 3
-$u_loop:
-	extqh	t2, a1, t0	# e0    : extract high bits for current word
-	addq	a1, 8, a1	# .. e1 :
-	extql	t2, a1, t3	# e0    : extract low bits for next time
-	addq	a0, 8, a0	# .. e1 :
-	or	t0, t1, t0	# e0    : current dst word now complete
-	EX( ldq_u t2, 0(a1) )	# .. e1 : load high word for next time
-	stq_u	t0, -8(a0)	# e0    : save the current word
-	mov	t3, t1		# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t2, t8	# .. e1 : test new word for eos
-	beq	a2, $u_eoc	# e1    :
-	beq	t8, $u_loop	# e1    :
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	extqh	t2, a1, t0	# e0    :
-	or	t0, t1, t0	# e1    : first (partial) source word complete
-
-	cmpbge	zero, t0, t8	# e0    : is the null in this first bit?
-	bne	t8, $u_final	# .. e1 (zdb)
-
-	stq_u	t0, 0(a0)	# e0    : the null was in the high-order bits
-	addq	a0, 8, a0	# .. e1 :
-	subq	a2, 1, a2	# e1    :
-
-$u_late_head_exit:
-	extql	t2, a1, t0	# .. e0 :
-	cmpbge	zero, t0, t8	# e0    :
-	or	t8, t10, t6	# e1    :
-	cmoveq	a2, t6, t8	# e0    :
-	nop			# .. e1 :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# e0    : isolate low bit set
-	and	t6, t8, t12	# e1    :
-
-	and	t12, 0x80, t6	# e0    : avoid dest word load if we can
-	bne	t6, 1f		# .. e1 (zdb)
-
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t6, t12, t8	# e0    :
-	zapnot	t0, t8, t0	# .. e1 : kill source bytes > null
-	zap	t1, t8, t1	# e0    : kill dest bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)	# e0    :
-	br	$finish_up
-
-$u_eoc:				# end-of-count
-	extqh	t2, a1, t0
-	or	t0, t1, t0
-	cmpbge	zero, t0, t8
-
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8
-	br	$u_final
-
-	/* Unaligned copy entry point.  */
-	.align 3
-$unaligned:
-
-	EX( ldq_u t1, 0(a1) )	# e0    : load first source word
-
-	and	a0, 7, t4	# .. e1 : find dest misalignment
-	and	a1, 7, t5	# e0    : find src misalignment
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t0	# .. e1 :
-	mov	zero, t6	# e0    :
-	beq	t4, 1f		# .. e1 :
-	ldq_u	t0, 0(a0)	# e0    :
-	lda	t6, -1		# .. e1 :
-	mskql	t6, a0, t6	# e0    :
-1:
-	subq	a1, t4, a1	# .. e1 : sub dest misalignment from src addr
-
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-
-	cmplt	t4, t5, t12	# e1    :
-	extql	t1, a1, t1	# .. e0 : shift src into place
-	lda	t2, -1		# e0    : for creating masks later
-	beq	t12, $u_head	# e1    :
-
-	mskqh	t2, t5, t2	# e0    : begin src byte validity mask
-	cmpbge	zero, t1, t8	# .. e1 : is there a zero?
-	extql	t2, a1, t2	# e0    :
-	or	t8, t10, t5	# .. e1 : test for end-of-count too
-	cmpbge	zero, t2, t3	# e0    :
-	cmoveq	a2, t5, t8	# .. e1 :
-	andnot	t8, t3, t8	# e0    :
-	beq	t8, $u_head	# .. e1 (zdb)
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# e0    :
-	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# e0    :
-	and	t6, t8, t12	# .. e1 :
-	subq	t12, 1, t6	# e0    :
-	or	t6, t12, t8	# e1    :
-
-	zapnot	t2, t8, t2	# e0    : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# .. e1 : to source validity mask
-
-	andnot	t0, t2, t0	# e0    : zero place for source to reside
-	or	t0, t1, t0	# e1    : and put it there
-	stq_u	t0, 0(a0)	# e0    :
-
-$finish_up:
-	zapnot	t0, t12, t4	# was last byte written null?
-	cmovne	t4, 1, t4
-
-	and	t12, 0xf0, t3	# binary search for the address of the
-	and	t12, 0xcc, t2	# last byte written
-	and	t12, 0xaa, t1
-	bic	a0, 7, t0
-	cmovne	t3, 4, t3
-	cmovne	t2, 2, t2
-	cmovne	t1, 1, t1
-	addq	t0, t3, t0
-	addq	t1, t2, t1
-	addq	t0, t1, t0
-	addq	t0, t4, t0	# add one if we filled the buffer
-
-	subq	t0, v0, v0	# find string length
-	ret
-
-$zerolength:
-	clr	v0
-$exception:
-	ret
-
-	.end __strncpy_from_user
diff --git a/ANDROID_3.4.5/arch/alpha/lib/strrchr.S b/ANDROID_3.4.5/arch/alpha/lib/strrchr.S
deleted file mode 100644
index 1970dc07..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/strrchr.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/alpha/lib/strrchr.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Return the address of the last occurrence of a given character
- * within a null-terminated string, or null if it is not found.
- */
-
-#include <asm/regdef.h>
-
-	.set noreorder
-	.set noat
-
-	.align 3
-	.ent strrchr
-	.globl strrchr
-strrchr:
-	.frame sp, 0, ra
-	.prologue 0
-
-	zapnot	a1, 1, a1	# e0    : zero extend our test character
-	mov	zero, t6	# .. e1 : t6 is last match aligned addr
-	sll	a1, 8, t5	# e0    : replicate our test character
-	mov	zero, t8	# .. e1 : t8 is last match byte compare mask
-	or	t5, a1, a1	# e0    :
-	ldq_u   t0, 0(a0)	# .. e1 : load first quadword
-	sll	a1, 16, t5	# e0    :
-	andnot  a0, 7, v0	# .. e1 : align source addr
-	or	t5, a1, a1	# e0    :
-	lda	t4, -1		# .. e1 : build garbage mask
-	sll	a1, 32, t5	# e0    :
-	cmpbge  zero, t0, t1	# .. e1 : bits set iff byte == zero
-	mskqh	t4, a0, t4	# e0    :
-	or	t5, a1, a1	# .. e1 : character replication complete
-	xor	t0, a1, t2	# e0    : make bytes == c zero
-	cmpbge	zero, t4, t4	# .. e1 : bits set iff byte is garbage
-	cmpbge  zero, t2, t3	# e0    : bits set iff byte == c
-	andnot	t1, t4, t1	# .. e1 : clear garbage from null test
-	andnot	t3, t4, t3	# e0    : clear garbage from char test
-	bne	t1, $eos	# .. e1 : did we already hit the terminator?
-
-	/* Character search main loop */
-$loop:
-	ldq	t0, 8(v0)	# e0    : load next quadword
-	cmovne	t3, v0, t6	# .. e1 : save previous comparisons match
-	cmovne	t3, t3, t8	# e0    :
-	addq	v0, 8, v0	# .. e1 :
-	xor	t0, a1, t2	# e0    :
-	cmpbge	zero, t0, t1	# .. e1 : bits set iff byte == zero
-	cmpbge	zero, t2, t3	# e0    : bits set iff byte == c
-	beq	t1, $loop	# .. e1 : if we havnt seen a null, loop
-
-	/* Mask out character matches after terminator */
-$eos:
-	negq	t1, t4		# e0    : isolate first null byte match
-	and	t1, t4, t4	# e1    :
-	subq	t4, 1, t5	# e0    : build a mask of the bytes up to...
-	or	t4, t5, t4	# e1    : ... and including the null
-
-	and	t3, t4, t3	# e0    : mask out char matches after null
-	cmovne	t3, t3, t8	# .. e1 : save it, if match found
-	cmovne	t3, v0, t6	# e0    :
-
-	/* Locate the address of the last matched character */
-
-	/* Retain the early exit for the ev4 -- the ev5 mispredict penalty
-	   is 5 cycles -- the same as just falling through.  */
-	beq	t8, $retnull	# .. e1 :
-
-	and	t8, 0xf0, t2	# e0    : binary search for the high bit set
-	cmovne	t2, t2, t8	# .. e1 (zdb)
-	cmovne	t2, 4, t2	# e0    :
-	and	t8, 0xcc, t1	# .. e1 :
-	cmovne	t1, t1, t8	# e0    :
-	cmovne	t1, 2, t1	# .. e1 :
-	and	t8, 0xaa, t0	# e0    :
-	cmovne	t0, 1, t0	# .. e1 (zdb)
-	addq	t2, t1, t1	# e0    :
-	addq	t6, t0, v0	# .. e1 : add our aligned base ptr to the mix
-	addq	v0, t1, v0	# e0    :
-	ret			# .. e1 :
-
-$retnull:
-	mov	zero, v0	# e0    :
-	ret			# .. e1 :
-
-	.end strrchr
diff --git a/ANDROID_3.4.5/arch/alpha/lib/stxcpy.S b/ANDROID_3.4.5/arch/alpha/lib/stxcpy.S
deleted file mode 100644
index 2a8d51bf..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/stxcpy.S
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * arch/alpha/lib/stxcpy.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Copy a null-terminated string from SRC to DST.
- *
- * This is an internal routine used by strcpy, stpcpy, and strcat.
- * As such, it uses special linkage conventions to make implementation
- * of these public functions more efficient.
- *
- * On input:
- *	t9 = return address
- *	a0 = DST
- *	a1 = SRC
- *
- * On output:
- *	t12 = bitmask (with one bit set) indicating the last byte written
- *	a0  = unaligned address of the last *word* written
- *
- * Furthermore, v0, a3-a5, t11, and t12 are untouched.
- */
-
-#include <asm/regdef.h>
-
-	.set noat
-	.set noreorder
-
-	.text
-
-/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that
-   doesn't like putting the entry point for a procedure somewhere in the
-   middle of the procedure descriptor.  Work around this by putting the
-   aligned copy in its own procedure descriptor */
-
-	.ent stxcpy_aligned
-	.align 3
-stxcpy_aligned:
-	.frame sp, 0, t9
-	.prologue 0
-
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# e1    : build a mask against false zero
-	mskqh	t2, a1, t2	# e0    :   detection in the src word
-	mskqh	t1, a1, t3	# e0    :
-	ornot	t1, t2, t2	# .. e1 :
-	mskql	t0, a1, t0	# e0    : assemble the first output word
-	cmpbge	zero, t2, t8	# .. e1 : bits set iff null found
-	or	t0, t3, t1	# e0    :
-	bne	t8, $a_eos	# .. e1 :
-
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == a source word not containing a null.  */
-
-$a_loop:
-	stq_u	t1, 0(a0)	# e0    :
-	addq	a0, 8, a0	# .. e1 :
-	ldq_u	t1, 0(a1)	# e0    :
-	addq	a1, 8, a1	# .. e1 :
-	cmpbge	zero, t1, t8	# e0 (stall)
-	beq	t8, $a_loop	# .. e1 (zdb)
-
-	/* Take care of the final (partial) word store.
-	   On entry to this basic block we have:
-	   t1 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-$a_eos:
-	negq	t8, t6		# e0    : find low bit set
-	and	t8, t6, t12	# e1 (stall)
-
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# e0    :
-	bne	t6, 1f		# .. e1 (zdb)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t0, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	zapnot	t1, t6, t1	# e0    : clear src bytes >= null
-	or	t12, t6, t8	# .. e1 :
-	zap	t0, t8, t0	# e0    : clear dst bytes <= null
-	or	t0, t1, t1	# e1    :
-
-1:	stq_u	t1, 0(a0)	# e0    :
-	ret	(t9)		# .. e1 :
-
-	.end stxcpy_aligned
-
-	.align 3
-	.ent __stxcpy
-	.globl __stxcpy
-__stxcpy:
-	.frame sp, 0, t9
-	.prologue 0
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t0	# e0    :
-	unop			#       :
-	and	t0, 7, t0	# e0    :
-	bne	t0, $unaligned	# .. e1 :
-
-	/* We are co-aligned; take care of a partial first word.  */
-	ldq_u	t1, 0(a1)	# e0    : load first src word
-	and	a0, 7, t0	# .. e1 : take care not to load a word ...
-	addq	a1, 8, a1		# e0    :
-	beq	t0, stxcpy_aligned	# .. e1 : ... if we wont need it
-	ldq_u	t0, 0(a0)	# e0    :
-	br	stxcpy_aligned	# .. e1 :
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 3
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, for masking back in, if needed else 0
-	   t1 == the low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	ldq_u	t2, 8(a1)	# e0    :
-	addq	a1, 8, a1	# .. e1 :
-
-	extql	t1, a1, t1	# e0    :
-	extqh	t2, a1, t4	# e0    :
-	mskql	t0, a0, t0	# e0    :
-	or	t1, t4, t1	# .. e1 :
-	mskqh	t1, a0, t1	# e0    :
-	or	t0, t1, t1	# e1    :
-
-	or	t1, t6, t6	# e0    :
-	cmpbge	zero, t6, t8	# .. e1 :
-	lda	t6, -1		# e0    : for masking just below
-	bne	t8, $u_final	# .. e1 :
-
-	mskql	t6, a1, t6		# e0    : mask out the bits we have
-	or	t6, t2, t2		# e1    :   already extracted before
-	cmpbge	zero, t2, t8		# e0    :   testing eos
-	bne	t8, $u_late_head_exit	# .. e1 (zdb)
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	stq_u	t1, 0(a0)	# e0    : store first output word
-	addq	a0, 8, a0	# .. e1 :
-	extql	t2, a1, t0	# e0    : position ho-bits of lo word
-	ldq_u	t2, 8(a1)	# .. e1 : read next high-order source word
-	addq	a1, 8, a1	# e0    :
-	cmpbge	zero, t2, t8	# .. e1 :
-	nop			# e0    :
-	bne	t8, $u_eos	# .. e1 :
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t0 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 3
-$u_loop:
-	extqh	t2, a1, t1	# e0    : extract high bits for current word
-	addq	a1, 8, a1	# .. e1 :
-	extql	t2, a1, t3	# e0    : extract low bits for next time
-	addq	a0, 8, a0	# .. e1 :
-	or	t0, t1, t1	# e0    : current dst word now complete
-	ldq_u	t2, 0(a1)	# .. e1 : load high word for next time
-	stq_u	t1, -8(a0)	# e0    : save the current word
-	mov	t3, t0		# .. e1 :
-	cmpbge	zero, t2, t8	# e0    : test new word for eos
-	beq	t8, $u_loop	# .. e1 :
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t0 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	extqh	t2, a1, t1	# e0    :
-	or	t0, t1, t1	# e1    : first (partial) source word complete
-
-	cmpbge	zero, t1, t8	# e0    : is the null in this first bit?
-	bne	t8, $u_final	# .. e1 (zdb)
-
-$u_late_head_exit:
-	stq_u	t1, 0(a0)	# e0    : the null was in the high-order bits
-	addq	a0, 8, a0	# .. e1 :
-	extql	t2, a1, t1	# e0    :
-	cmpbge	zero, t1, t8	# .. e1 :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t1 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# e0    : isolate low bit set
-	and	t6, t8, t12	# e1    :
-
-	and	t12, 0x80, t6	# e0    : avoid dest word load if we can
-	bne	t6, 1f		# .. e1 (zdb)
-
-	ldq_u	t0, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t6, t12, t8	# e0    :
-	zapnot	t1, t6, t1	# .. e1 : kill source bytes >= null
-	zap	t0, t8, t0	# e0    : kill dest bytes <= null
-	or	t0, t1, t1	# e1    :
-
-1:	stq_u	t1, 0(a0)	# e0    :
-	ret	(t9)		# .. e1 :
-
-	/* Unaligned copy entry point.  */
-	.align 3
-$unaligned:
-
-	ldq_u	t1, 0(a1)	# e0    : load first source word
-
-	and	a0, 7, t4	# .. e1 : find dest misalignment
-	and	a1, 7, t5	# e0    : find src misalignment
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t0	# .. e1 :
-	mov	zero, t6	# e0    :
-	beq	t4, 1f		# .. e1 :
-	ldq_u	t0, 0(a0)	# e0    :
-	lda	t6, -1		# .. e1 :
-	mskql	t6, a0, t6	# e0    :
-1:
-	subq	a1, t4, a1	# .. e1 : sub dest misalignment from src addr
-
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-
-	cmplt	t4, t5, t12	# e0    :
-	beq	t12, $u_head	# .. e1 (zdb)
-
-	lda	t2, -1		# e1    : mask out leading garbage in source
-	mskqh	t2, t5, t2	# e0    :
-	nop			# e0    :
-	ornot	t1, t2, t3	# .. e1 :
-	cmpbge	zero, t3, t8	# e0    : is there a zero?
-	beq	t8, $u_head	# .. e1 (zdb)
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# e0    :
-
-	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
-	and	t6, t8, t12	# e0    :
-	and	a1, 7, t5	# .. e1 :
-	subq	t12, 1, t6	# e0    :
-	or	t6, t12, t8	# e1    :
-	srl	t12, t5, t12	# e0    : adjust final null return value
-
-	zapnot	t2, t8, t2	# .. e1 : prepare source word; mirror changes
-	and	t1, t2, t1	# e1    : to source validity mask
-	extql	t2, a1, t2	# .. e0 :
-	extql	t1, a1, t1	# e0    :
-
-	andnot	t0, t2, t0	# .. e1 : zero place for source to reside
-	or	t0, t1, t1	# e1    : and put it there
-	stq_u	t1, 0(a0)	# .. e0 :
-	ret	(t9)		# e1    :
-
-	.end __stxcpy
diff --git a/ANDROID_3.4.5/arch/alpha/lib/stxncpy.S b/ANDROID_3.4.5/arch/alpha/lib/stxncpy.S
deleted file mode 100644
index 3dece252..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/stxncpy.S
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * arch/alpha/lib/stxncpy.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Copy no more than COUNT bytes of the null-terminated string from
- * SRC to DST.
- *
- * This is an internal routine used by strncpy, stpncpy, and strncat.
- * As such, it uses special linkage conventions to make implementation
- * of these public functions more efficient.
- *
- * On input:
- *	t9 = return address
- *	a0 = DST
- *	a1 = SRC
- *	a2 = COUNT
- *
- * Furthermore, COUNT may not be zero.
- *
- * On output:
- *	t0  = last word written
- *	t10 = bitmask (with one bit set) indicating the byte position of
- *	      the end of the range specified by COUNT
- *	t12 = bitmask (with one bit set) indicating the last byte written
- *	a0  = unaligned address of the last *word* written
- *	a2  = the number of full words left in COUNT
- *
- * Furthermore, v0, a3-a5, t11, and $at are untouched.
- */
-
-#include <asm/regdef.h>
-
-	.set noat
-	.set noreorder
-
-	.text
-
-/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that
-   doesn't like putting the entry point for a procedure somewhere in the
-   middle of the procedure descriptor.  Work around this by putting the
-   aligned copy in its own procedure descriptor */
-
-	.ent stxncpy_aligned
-	.align 3
-stxncpy_aligned:
-	.frame sp, 0, t9, 0
-	.prologue 0
-
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# e1    : build a mask against false zero
-	mskqh	t2, a1, t2	# e0    :   detection in the src word
-	mskqh	t1, a1, t3	# e0    :
-	ornot	t1, t2, t2	# .. e1 :
-	mskql	t0, a1, t0	# e0    : assemble the first output word
-	cmpbge	zero, t2, t8	# .. e1 : bits set iff null found
-	or	t0, t3, t0	# e0    :
-	beq	a2, $a_eoc	# .. e1 :
-	bne	t8, $a_eos	# .. e1 :
-
-	/* On entry to this basic block:
-	   t0 == a source word not containing a null.  */
-
-$a_loop:
-	stq_u	t0, 0(a0)	# e0    :
-	addq	a0, 8, a0	# .. e1 :
-	ldq_u	t0, 0(a1)	# e0    :
-	addq	a1, 8, a1	# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t0, t8	# .. e1 (stall)
-	beq	a2, $a_eoc      # e1    :
-	beq	t8, $a_loop	# e1    :
-
-	/* Take care of the final (partial) word store.  At this point
-	   the end-of-count bit is set in t8 iff it applies.
-
-	   On entry to this basic block we have:
-	   t0 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-
-$a_eos:
-	negq	t8, t12		# e0    : find low bit set
-	and	t8, t12, t12	# e1 (stall)
-
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# e0    :
-	bne	t6, 1f		# .. e1 (zdb)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t12, t6, t8	# e0    :
-	unop			#
-	zapnot	t0, t8, t0	# e0    : clear src bytes > null
-	zap	t1, t8, t1	# .. e1 : clear dst bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)	# e0    :
-	ret	(t9)		# e1    :
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-
-	.end stxncpy_aligned
-
-	.align 3
-	.ent __stxncpy
-	.globl __stxncpy
-__stxncpy:
-	.frame sp, 0, t9, 0
-	.prologue 0
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t1	# e0    :
-	and	a0, 7, t0	# .. e1 : find dest misalignment
-	and	t1, 7, t1	# e0    :
-	addq	a2, t0, a2	# .. e1 : bias count by dest misalignment
-	subq	a2, 1, a2	# e0    :
-	and	a2, 7, t2	# e1    :
-	srl	a2, 3, a2	# e0    : a2 = loop counter = (count - 1)/8
-	addq	zero, 1, t10	# .. e1 :
-	sll	t10, t2, t10	# e0    : t10 = bitmask of last count byte
-	bne	t1, $unaligned	# .. e1 :
-
-	/* We are co-aligned; take care of a partial first word.  */
-
-	ldq_u	t1, 0(a1)	# e0    : load first src word
-	addq	a1, 8, a1	# .. e1 :
-
-	beq	t0, stxncpy_aligned     # avoid loading dest word if not needed
-	ldq_u	t0, 0(a0)	# e0    :
-	br	stxncpy_aligned	# .. e1 :
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 3
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	ldq_u	t2, 8(a1)	# e0    : load second src word
-	addq	a1, 8, a1	# .. e1 :
-	mskql	t0, a0, t0	# e0    : mask trailing garbage in dst
-	extqh	t2, a1, t4	# e0    :
-	or	t1, t4, t1	# e1    : first aligned src word complete
-	mskqh	t1, a0, t1	# e0    : mask leading garbage in src
-	or	t0, t1, t0	# e0    : first output word complete
-	or	t0, t6, t6	# e1    : mask original data for zero test
-	cmpbge	zero, t6, t8	# e0    :
-	beq	a2, $u_eocfin	# .. e1 :
-	lda	t6, -1		# e0    :
-	bne	t8, $u_final	# .. e1 :
-
-	mskql	t6, a1, t6	# e0    : mask out bits already seen
-	nop			# .. e1 :
-	stq_u	t0, 0(a0)	# e0    : store first output word
-	or      t6, t2, t2	# .. e1 :
-	cmpbge	zero, t2, t8	# e0    : find nulls in second partial
-	addq	a0, 8, a0	# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	bne	t8, $u_late_head_exit	# .. e1 :
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# e0    : position hi-bits of lo word
-	beq	a2, $u_eoc	# .. e1 :
-	ldq_u	t2, 8(a1)	# e0    : read next high-order source word
-	addq	a1, 8, a1	# .. e1 :
-	extqh	t2, a1, t0	# e0    : position lo-bits of hi word (stall)
-	cmpbge	zero, t2, t8	# .. e1 :
-	nop			# e0    :
-	bne	t8, $u_eos	# .. e1 :
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t0 == the shifted low-order bits from the current source word
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 3
-$u_loop:
-	or	t0, t1, t0	# e0    : current dst word now complete
-	subq	a2, 1, a2	# .. e1 : decrement word count
-	stq_u	t0, 0(a0)	# e0    : save the current word
-	addq	a0, 8, a0	# .. e1 :
-	extql	t2, a1, t1	# e0    : extract high bits for next time
-	beq	a2, $u_eoc	# .. e1 :
-	ldq_u	t2, 8(a1)	# e0    : load high word for next time
-	addq	a1, 8, a1	# .. e1 :
-	nop			# e0    :
-	cmpbge	zero, t2, t8	# e1    : test new word for eos (stall)
-	extqh	t2, a1, t0	# e0    : extract low bits for current word
-	beq	t8, $u_loop	# .. e1 :
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t0 == the shifted low-order bits from the current source word
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	or	t0, t1, t0	# e0    : first (partial) source word complete
-	nop			# .. e1 :
-	cmpbge	zero, t0, t8	# e0    : is the null in this first bit?
-	bne	t8, $u_final	# .. e1 (zdb)
-
-	stq_u	t0, 0(a0)	# e0    : the null was in the high-order bits
-	addq	a0, 8, a0	# .. e1 :
-	subq	a2, 1, a2	# e1    :
-
-$u_late_head_exit:
-	extql	t2, a1, t0	# .. e0 :
-	cmpbge	zero, t0, t8	# e0    :
-	or	t8, t10, t6	# e1    :
-	cmoveq	a2, t6, t8	# e0    :
-	nop			# .. e1 :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# e0    : isolate low bit set
-	and	t6, t8, t12	# e1    :
-
-	and	t12, 0x80, t6	# e0    : avoid dest word load if we can
-	bne	t6, 1f		# .. e1 (zdb)
-
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t6, t12, t8	# e0    :
-	zapnot	t0, t8, t0	# .. e1 : kill source bytes > null
-	zap	t1, t8, t1	# e0    : kill dest bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)	# e0    :
-	ret	(t9)		# .. e1 :
-
-	/* Got to end-of-count before end of string.  
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word  */
-$u_eoc:
-	and	a1, 7, t6	# e1    :
-	sll	t10, t6, t6	# e0    :
-	and	t6, 0xff, t6	# e0    :
-	bne	t6, 1f		# .. e1 :
-
-	ldq_u	t2, 8(a1)	# e0    : load final src word
-	nop			# .. e1 :
-	extqh	t2, a1, t0	# e0    : extract low bits for last word
-	or	t1, t0, t1	# e1    :
-
-1:	cmpbge	zero, t1, t8
-	mov	t1, t0
-
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8
-	br	$u_final
-
-	/* Unaligned copy entry point.  */
-	.align 3
-$unaligned:
-
-	ldq_u	t1, 0(a1)	# e0    : load first source word
-
-	and	a0, 7, t4	# .. e1 : find dest misalignment
-	and	a1, 7, t5	# e0    : find src misalignment
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t0	# .. e1 :
-	mov	zero, t6	# e0    :
-	beq	t4, 1f		# .. e1 :
-	ldq_u	t0, 0(a0)	# e0    :
-	lda	t6, -1		# .. e1 :
-	mskql	t6, a0, t6	# e0    :
-	subq	a1, t4, a1	# .. e1 : sub dest misalignment from src addr
-
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-
-1:	cmplt	t4, t5, t12	# e1    :
-	extql	t1, a1, t1	# .. e0 : shift src into place
-	lda	t2, -1		# e0    : for creating masks later
-	beq	t12, $u_head	# .. e1 :
-
-	extql	t2, a1, t2	# e0    :
-	cmpbge	zero, t1, t8	# .. e1 : is there a zero?
-	andnot	t2, t6, t2	# e0    : dest mask for a single word copy
-	or	t8, t10, t5	# .. e1 : test for end-of-count too
-	cmpbge	zero, t2, t3	# e0    :
-	cmoveq	a2, t5, t8	# .. e1 :
-	andnot	t8, t3, t8	# e0    :
-	beq	t8, $u_head	# .. e1 (zdb)
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# e0    :
-	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# e0    :
-	and	t6, t8, t12	# .. e1 :
-	subq	t12, 1, t6	# e0    :
-	or	t6, t12, t8	# e1    :
-
-	zapnot	t2, t8, t2	# e0    : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# .. e1 : to source validity mask
-
-	andnot	t0, t2, t0	# e0    : zero place for source to reside
-	or	t0, t1, t0	# e1    : and put it there
-	stq_u	t0, 0(a0)	# e0    :
-	ret	(t9)		# .. e1 :
-
-	.end __stxncpy
diff --git a/ANDROID_3.4.5/arch/alpha/lib/udelay.c b/ANDROID_3.4.5/arch/alpha/lib/udelay.c
deleted file mode 100644
index 69d52aa3..00000000
--- a/ANDROID_3.4.5/arch/alpha/lib/udelay.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 1993, 2000 Linus Torvalds
- *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h> /* for udelay's use of smp_processor_id */
-#include <asm/param.h>
-#include <asm/smp.h>
-#include <linux/delay.h>
-
-/*
- * Use only for very small delays (< 1 msec). 
- *
- * The active part of our cycle counter is only 32-bits wide, and
- * we're treating the difference between two marks as signed.  On
- * a 1GHz box, that's about 2 seconds.
- */
-
-void
-__delay(int loops)
-{
-	int tmp;
-	__asm__ __volatile__(
-		"	rpcc %0\n"
-		"	addl %1,%0,%1\n"
-		"1:	rpcc %0\n"
-		"	subl %1,%0,%0\n"
-		"	bgt %0,1b"
-		: "=&r" (tmp), "=r" (loops) : "1"(loops));
-}
-
-#ifdef CONFIG_SMP
-#define LPJ	 cpu_data[smp_processor_id()].loops_per_jiffy
-#else
-#define LPJ	 loops_per_jiffy
-#endif
-
-void
-udelay(unsigned long usecs)
-{
-	usecs *= (((unsigned long)HZ << 32) / 1000000) * LPJ;
-	__delay((long)usecs >> 32);
-}
-EXPORT_SYMBOL(udelay);
-
-void
-ndelay(unsigned long nsecs)
-{
-	nsecs *= (((unsigned long)HZ << 32) / 1000000000) * LPJ;
-	__delay((long)nsecs >> 32);
-}
-EXPORT_SYMBOL(ndelay);
diff --git a/ANDROID_3.4.5/arch/alpha/math-emu/Makefile b/ANDROID_3.4.5/arch/alpha/math-emu/Makefile
deleted file mode 100644
index 7f467199..00000000
--- a/ANDROID_3.4.5/arch/alpha/math-emu/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the FPU instruction emulation.
-#
-
-ccflags-y := -w
-
-obj-$(CONFIG_MATHEMU) += math-emu.o
-
-math-emu-objs := math.o qrnnd.o
diff --git a/ANDROID_3.4.5/arch/alpha/math-emu/math.c b/ANDROID_3.4.5/arch/alpha/math-emu/math.c
deleted file mode 100644
index 58c2669a..00000000
--- a/ANDROID_3.4.5/arch/alpha/math-emu/math.c
+++ /dev/null
@@ -1,400 +0,0 @@
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/uaccess.h>
-
-#include "sfp-util.h"
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-#include <math-emu/double.h>
-
-#define	OPC_PAL		0x00
-#define OPC_INTA	0x10
-#define OPC_INTL	0x11
-#define OPC_INTS	0x12
-#define OPC_INTM	0x13
-#define OPC_FLTC	0x14
-#define OPC_FLTV	0x15
-#define OPC_FLTI	0x16
-#define OPC_FLTL	0x17
-#define OPC_MISC	0x18
-#define	OPC_JSR		0x1a
-
-#define FOP_SRC_S	0
-#define FOP_SRC_T	2
-#define FOP_SRC_Q	3
-
-#define FOP_FNC_ADDx	0
-#define FOP_FNC_CVTQL	0
-#define FOP_FNC_SUBx	1
-#define FOP_FNC_MULx	2
-#define FOP_FNC_DIVx	3
-#define FOP_FNC_CMPxUN	4
-#define FOP_FNC_CMPxEQ	5
-#define FOP_FNC_CMPxLT	6
-#define FOP_FNC_CMPxLE	7
-#define FOP_FNC_SQRTx	11
-#define FOP_FNC_CVTxS	12
-#define FOP_FNC_CVTxT	14
-#define FOP_FNC_CVTxQ	15
-
-#define MISC_TRAPB	0x0000
-#define MISC_EXCB	0x0400
-
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-
-#ifdef MODULE
-
-MODULE_DESCRIPTION("FP Software completion module");
-
-extern long (*alpha_fp_emul_imprecise)(struct pt_regs *, unsigned long);
-extern long (*alpha_fp_emul) (unsigned long pc);
-
-static long (*save_emul_imprecise)(struct pt_regs *, unsigned long);
-static long (*save_emul) (unsigned long pc);
-
-long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
-long do_alpha_fp_emul(unsigned long);
-
-int init_module(void)
-{
-	save_emul_imprecise = alpha_fp_emul_imprecise;
-	save_emul = alpha_fp_emul;
-	alpha_fp_emul_imprecise = do_alpha_fp_emul_imprecise;
-	alpha_fp_emul = do_alpha_fp_emul;
-	return 0;
-}
-
-void cleanup_module(void)
-{
-	alpha_fp_emul_imprecise = save_emul_imprecise;
-	alpha_fp_emul = save_emul;
-}
-
-#undef  alpha_fp_emul_imprecise
-#define alpha_fp_emul_imprecise		do_alpha_fp_emul_imprecise
-#undef  alpha_fp_emul
-#define alpha_fp_emul			do_alpha_fp_emul
-
-#endif /* MODULE */
-
-
-/*
- * Emulate the floating point instruction at address PC.  Returns -1 if the
- * instruction to be emulated is illegal (such as with the opDEC trap), else
- * the SI_CODE for a SIGFPE signal, else 0 if everything's ok.
- *
- * Notice that the kernel does not and cannot use FP regs.  This is good
- * because it means that instead of saving/restoring all fp regs, we simply
- * stick the result of the operation into the appropriate register.
- */
-long
-alpha_fp_emul (unsigned long pc)
-{
-	FP_DECL_EX;
-	FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
-	FP_DECL_D(DA); FP_DECL_D(DB); FP_DECL_D(DR);
-
-	unsigned long fa, fb, fc, func, mode, src;
-	unsigned long res, va, vb, vc, swcr, fpcr;
-	__u32 insn;
-	long si_code;
-
-	get_user(insn, (__u32 __user *)pc);
-	fc     = (insn >>  0) & 0x1f;	/* destination register */
-	fb     = (insn >> 16) & 0x1f;
-	fa     = (insn >> 21) & 0x1f;
-	func   = (insn >>  5) & 0xf;
-	src    = (insn >>  9) & 0x3;
-	mode   = (insn >> 11) & 0x3;
-	
-	fpcr = rdfpcr();
-	swcr = swcr_update_status(current_thread_info()->ieee_state, fpcr);
-
-	if (mode == 3) {
-		/* Dynamic -- get rounding mode from fpcr.  */
-		mode = (fpcr >> FPCR_DYN_SHIFT) & 3;
-	}
-
-	switch (src) {
-	case FOP_SRC_S:
-		va = alpha_read_fp_reg_s(fa);
-		vb = alpha_read_fp_reg_s(fb);
-		
-		FP_UNPACK_SP(SA, &va);
-		FP_UNPACK_SP(SB, &vb);
-
-		switch (func) {
-		case FOP_FNC_SUBx:
-			FP_SUB_S(SR, SA, SB);
-			goto pack_s;
-
-		case FOP_FNC_ADDx:
-			FP_ADD_S(SR, SA, SB);
-			goto pack_s;
-
-		case FOP_FNC_MULx:
-			FP_MUL_S(SR, SA, SB);
-			goto pack_s;
-
-		case FOP_FNC_DIVx:
-			FP_DIV_S(SR, SA, SB);
-			goto pack_s;
-
-		case FOP_FNC_SQRTx:
-			FP_SQRT_S(SR, SB);
-			goto pack_s;
-		}
-		goto bad_insn;
-
-	case FOP_SRC_T:
-		va = alpha_read_fp_reg(fa);
-		vb = alpha_read_fp_reg(fb);
-
-		if ((func & ~3) == FOP_FNC_CMPxUN) {
-			FP_UNPACK_RAW_DP(DA, &va);
-			FP_UNPACK_RAW_DP(DB, &vb);
-			if (!DA_e && !_FP_FRAC_ZEROP_1(DA)) {
-				FP_SET_EXCEPTION(FP_EX_DENORM);
-				if (FP_DENORM_ZERO)
-					_FP_FRAC_SET_1(DA, _FP_ZEROFRAC_1);
-			}
-			if (!DB_e && !_FP_FRAC_ZEROP_1(DB)) {
-				FP_SET_EXCEPTION(FP_EX_DENORM);
-				if (FP_DENORM_ZERO)
-					_FP_FRAC_SET_1(DB, _FP_ZEROFRAC_1);
-			}
-			FP_CMP_D(res, DA, DB, 3);
-			vc = 0x4000000000000000UL;
-			/* CMPTEQ, CMPTUN don't trap on QNaN,
-			   while CMPTLT and CMPTLE do */
-			if (res == 3
-			    && ((func & 3) >= 2
-				|| FP_ISSIGNAN_D(DA)
-				|| FP_ISSIGNAN_D(DB))) {
-				FP_SET_EXCEPTION(FP_EX_INVALID);
-			}
-			switch (func) {
-			case FOP_FNC_CMPxUN: if (res != 3) vc = 0; break;
-			case FOP_FNC_CMPxEQ: if (res) vc = 0; break;
-			case FOP_FNC_CMPxLT: if (res != -1) vc = 0; break;
-			case FOP_FNC_CMPxLE: if ((long)res > 0) vc = 0; break;
-			}
-			goto done_d;
-		}
-
-		FP_UNPACK_DP(DA, &va);
-		FP_UNPACK_DP(DB, &vb);
-
-		switch (func) {
-		case FOP_FNC_SUBx:
-			FP_SUB_D(DR, DA, DB);
-			goto pack_d;
-
-		case FOP_FNC_ADDx:
-			FP_ADD_D(DR, DA, DB);
-			goto pack_d;
-
-		case FOP_FNC_MULx:
-			FP_MUL_D(DR, DA, DB);
-			goto pack_d;
-
-		case FOP_FNC_DIVx:
-			FP_DIV_D(DR, DA, DB);
-			goto pack_d;
-
-		case FOP_FNC_SQRTx:
-			FP_SQRT_D(DR, DB);
-			goto pack_d;
-
-		case FOP_FNC_CVTxS:
-			/* It is irritating that DEC encoded CVTST with
-			   SRC == T_floating.  It is also interesting that
-			   the bit used to tell the two apart is /U... */
-			if (insn & 0x2000) {
-				FP_CONV(S,D,1,1,SR,DB);
-				goto pack_s;
-			} else {
-				vb = alpha_read_fp_reg_s(fb);
-				FP_UNPACK_SP(SB, &vb);
-				DR_c = DB_c;
-				DR_s = DB_s;
-				DR_e = DB_e + (1024 - 128);
-				DR_f = SB_f << (52 - 23);
-				goto pack_d;
-			}
-
-		case FOP_FNC_CVTxQ:
-			if (DB_c == FP_CLS_NAN
-			    && (_FP_FRAC_HIGH_RAW_D(DB) & _FP_QNANBIT_D)) {
-			  /* AAHB Table B-2 says QNaN should not trigger INV */
-				vc = 0;
-			} else
-				FP_TO_INT_ROUND_D(vc, DB, 64, 2);
-			goto done_d;
-		}
-		goto bad_insn;
-
-	case FOP_SRC_Q:
-		vb = alpha_read_fp_reg(fb);
-
-		switch (func) {
-		case FOP_FNC_CVTQL:
-			/* Notice: We can get here only due to an integer
-			   overflow.  Such overflows are reported as invalid
-			   ops.  We return the result the hw would have
-			   computed.  */
-			vc = ((vb & 0xc0000000) << 32 |	/* sign and msb */
-			      (vb & 0x3fffffff) << 29);	/* rest of the int */
-			FP_SET_EXCEPTION (FP_EX_INVALID);
-			goto done_d;
-
-		case FOP_FNC_CVTxS:
-			FP_FROM_INT_S(SR, ((long)vb), 64, long);
-			goto pack_s;
-
-		case FOP_FNC_CVTxT:
-			FP_FROM_INT_D(DR, ((long)vb), 64, long);
-			goto pack_d;
-		}
-		goto bad_insn;
-	}
-	goto bad_insn;
-
-pack_s:
-	FP_PACK_SP(&vc, SR);
-	if ((_fex & FP_EX_UNDERFLOW) && (swcr & IEEE_MAP_UMZ))
-		vc = 0;
-	alpha_write_fp_reg_s(fc, vc);
-	goto done;
-
-pack_d:
-	FP_PACK_DP(&vc, DR);
-	if ((_fex & FP_EX_UNDERFLOW) && (swcr & IEEE_MAP_UMZ))
-		vc = 0;
-done_d:
-	alpha_write_fp_reg(fc, vc);
-	goto done;
-
-	/*
-	 * Take the appropriate action for each possible
-	 * floating-point result:
-	 *
-	 *	- Set the appropriate bits in the FPCR
-	 *	- If the specified exception is enabled in the FPCR,
-	 *	  return.  The caller (entArith) will dispatch
-	 *	  the appropriate signal to the translated program.
-	 *
-	 * In addition, properly track the exception state in software
-	 * as described in the Alpha Architecture Handbook section 4.7.7.3.
-	 */
-done:
-	if (_fex) {
-		/* Record exceptions in software control word.  */
-		swcr |= (_fex << IEEE_STATUS_TO_EXCSUM_SHIFT);
-		current_thread_info()->ieee_state
-		  |= (_fex << IEEE_STATUS_TO_EXCSUM_SHIFT);
-
-		/* Update hardware control register.  */
-		fpcr &= (~FPCR_MASK | FPCR_DYN_MASK);
-		fpcr |= ieee_swcr_to_fpcr(swcr);
-		wrfpcr(fpcr);
-
-		/* Do we generate a signal?  */
-		_fex = _fex & swcr & IEEE_TRAP_ENABLE_MASK;
-		si_code = 0;
-		if (_fex) {
-			if (_fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND;
-			if (_fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES;
-			if (_fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND;
-			if (_fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF;
-			if (_fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
-			if (_fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
-		}
-
-		return si_code;
-	}
-
-	/* We used to write the destination register here, but DEC FORTRAN
-	   requires that the result *always* be written... so we do the write
-	   immediately after the operations above.  */
-
-	return 0;
-
-bad_insn:
-	printk(KERN_ERR "alpha_fp_emul: Invalid FP insn %#x at %#lx\n",
-	       insn, pc);
-	return -1;
-}
-
-long
-alpha_fp_emul_imprecise (struct pt_regs *regs, unsigned long write_mask)
-{
-	unsigned long trigger_pc = regs->pc - 4;
-	unsigned long insn, opcode, rc, si_code = 0;
-
-	/*
-	 * Turn off the bits corresponding to registers that are the
-	 * target of instructions that set bits in the exception
-	 * summary register.  We have some slack doing this because a
-	 * register that is the target of a trapping instruction can
-	 * be written at most once in the trap shadow.
-	 *
-	 * Branches, jumps, TRAPBs, EXCBs and calls to PALcode all
-	 * bound the trap shadow, so we need not look any further than
-	 * up to the first occurrence of such an instruction.
-	 */
-	while (write_mask) {
-		get_user(insn, (__u32 __user *)(trigger_pc));
-		opcode = insn >> 26;
-		rc = insn & 0x1f;
-
-		switch (opcode) {
-		      case OPC_PAL:
-		      case OPC_JSR:
-		      case 0x30 ... 0x3f:	/* branches */
-			goto egress;
-
-		      case OPC_MISC:
-			switch (insn & 0xffff) {
-			      case MISC_TRAPB:
-			      case MISC_EXCB:
-				goto egress;
-
-			      default:
-				break;
-			}
-			break;
-
-		      case OPC_INTA:
-		      case OPC_INTL:
-		      case OPC_INTS:
-		      case OPC_INTM:
-			write_mask &= ~(1UL << rc);
-			break;
-
-		      case OPC_FLTC:
-		      case OPC_FLTV:
-		      case OPC_FLTI:
-		      case OPC_FLTL:
-			write_mask &= ~(1UL << (rc + 32));
-			break;
-		}
-		if (!write_mask) {
-			/* Re-execute insns in the trap-shadow.  */
-			regs->pc = trigger_pc + 4;
-			si_code = alpha_fp_emul(trigger_pc);
-			goto egress;
-		}
-		trigger_pc -= 4;
-	}
-
-egress:
-	return si_code;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/math-emu/qrnnd.S b/ANDROID_3.4.5/arch/alpha/math-emu/qrnnd.S
deleted file mode 100644
index d6373ec1..00000000
--- a/ANDROID_3.4.5/arch/alpha/math-emu/qrnnd.S
+++ /dev/null
@@ -1,163 +0,0 @@
- # Alpha 21064 __udiv_qrnnd
- # Copyright (C) 1992, 1994, 1995, 2000 Free Software Foundation, Inc.
-
- # This file is part of GCC.
-
- # The GNU MP Library is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2 of the License, or (at your
- # option) any later version.
-
- # In addition to the permissions in the GNU General Public License, the
- # Free Software Foundation gives you unlimited permission to link the
- # compiled version of this file with other programs, and to distribute
- # those programs without any restriction coming from the use of this
- # file.  (The General Public License restrictions do apply in other
- # respects; for example, they cover modification of the file, and
- # distribution when not linked into another program.)
-
- # This file is distributed in the hope that it will be useful, but
- # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
- # License for more details.
-
- # You should have received a copy of the GNU General Public License
- # along with GCC; see the file COPYING.  If not, write to the 
- # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- # MA 02111-1307, USA.
-
-        .set noreorder
-        .set noat
-
-	.text
-
-	.globl __udiv_qrnnd
-	.ent __udiv_qrnnd
-__udiv_qrnnd:
-	.frame $30,0,$26,0
-	.prologue 0
-
-#define cnt	$2
-#define tmp	$3
-#define rem_ptr	$16
-#define n1	$17
-#define n0	$18
-#define d	$19
-#define qb	$20
-#define AT	$at
-
-	ldiq	cnt,16
-	blt	d,$largedivisor
-
-$loop1:	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	subq	cnt,1,cnt
-	bgt	cnt,$loop1
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-$largedivisor:
-	and	n0,1,$4
-
-	srl	n0,1,n0
-	sll	n1,63,tmp
-	or	tmp,n0,n0
-	srl	n1,1,n1
-
-	and	d,1,$6
-	srl	d,1,$5
-	addq	$5,$6,$5
-
-$loop2:	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	subq	cnt,1,cnt
-	bgt	cnt,$loop2
-
-	addq	n1,n1,n1
-	addq	$4,n1,n1
-	bne	$6,$Odd
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-$Odd:
-	/* q' in n0. r' in n1 */
-	addq	n1,n0,n1
-
-	cmpult	n1,n0,tmp	# tmp := carry from addq
-	subq	n1,d,AT
-	addq	n0,tmp,n0
-	cmovne	tmp,AT,n1
-
-	cmpult	n1,d,tmp
-	addq	n0,1,AT
-	cmoveq	tmp,AT,n0
-	subq	n1,d,AT
-	cmoveq	tmp,AT,n1
-
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-	.end	__udiv_qrnnd
diff --git a/ANDROID_3.4.5/arch/alpha/math-emu/sfp-util.h b/ANDROID_3.4.5/arch/alpha/math-emu/sfp-util.h
deleted file mode 100644
index f53707f7..00000000
--- a/ANDROID_3.4.5/arch/alpha/math-emu/sfp-util.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/fpu.h>
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-  ((sl) = (al) + (bl), (sh) = (ah) + (bh) + ((sl) < (al)))
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-  ((sl) = (al) - (bl), (sh) = (ah) - (bh) - ((al) < (bl)))
-
-#define umul_ppmm(wh, wl, u, v)			\
-  __asm__ ("mulq %2,%3,%1; umulh %2,%3,%0"	\
-	   : "=r" ((UDItype)(wh)),		\
-	     "=&r" ((UDItype)(wl))		\
-	   : "r" ((UDItype)(u)),		\
-	     "r" ((UDItype)(v)))
-
-#define udiv_qrnnd(q, r, n1, n0, d)				\
-  do { unsigned long __r;					\
-    (q) = __udiv_qrnnd (&__r, (n1), (n0), (d));			\
-    (r) = __r;							\
-  } while (0)
-extern unsigned long __udiv_qrnnd (unsigned long *, unsigned long,
-				   unsigned long , unsigned long);
-
-#define UDIV_NEEDS_NORMALIZATION 1  
-
-#define abort()			goto bad_insn
-
-#ifndef __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN -1
-#endif
-#define __BYTE_ORDER __LITTLE_ENDIAN
diff --git a/ANDROID_3.4.5/arch/alpha/mm/Makefile b/ANDROID_3.4.5/arch/alpha/mm/Makefile
deleted file mode 100644
index c993d3f9..00000000
--- a/ANDROID_3.4.5/arch/alpha/mm/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux alpha-specific parts of the memory manager.
-#
-
-ccflags-y := -Werror
-
-obj-y	:= init.o fault.o extable.o
-
-obj-$(CONFIG_DISCONTIGMEM) += numa.o
diff --git a/ANDROID_3.4.5/arch/alpha/mm/extable.c b/ANDROID_3.4.5/arch/alpha/mm/extable.c
deleted file mode 100644
index 813c9b63..00000000
--- a/ANDROID_3.4.5/arch/alpha/mm/extable.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/alpha/mm/extable.c
- */
-
-#include <linux/module.h>
-#include <linux/sort.h>
-#include <asm/uaccess.h>
-
-static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
-{
-	return (unsigned long)&x->insn + x->insn;
-}
-
-static void swap_ex(void *a, void *b, int size)
-{
-	struct exception_table_entry *ex_a = a, *ex_b = b;
-	unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
-	unsigned int t = ex_a->fixup.unit;
-
-	ex_a->fixup.unit = ex_b->fixup.unit;
-	ex_b->fixup.unit = t;
-	ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
-	ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
-}
-
-/*
- * The exception table needs to be sorted so that the binary
- * search that we use to find entries in it works properly.
- * This is used both for the kernel exception table and for
- * the exception tables of modules that get loaded.
- */
-static int cmp_ex(const void *a, const void *b)
-{
-	const struct exception_table_entry *x = a, *y = b;
-
-	/* avoid overflow */
-	if (ex_to_addr(x) > ex_to_addr(y))
-		return 1;
-	if (ex_to_addr(x) < ex_to_addr(y))
-		return -1;
-	return 0;
-}
-
-void sort_extable(struct exception_table_entry *start,
-		  struct exception_table_entry *finish)
-{
-	sort(start, finish - start, sizeof(struct exception_table_entry),
-	     cmp_ex, swap_ex);
-}
-
-#ifdef CONFIG_MODULES
-/*
- * Any entry referring to the module init will be at the beginning or
- * the end.
- */
-void trim_init_extable(struct module *m)
-{
-	/*trim the beginning*/
-	while (m->num_exentries &&
-	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
-		m->extable++;
-		m->num_exentries--;
-	}
-	/*trim the end*/
-	while (m->num_exentries &&
-	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
-				  m))
-		m->num_exentries--;
-}
-#endif /* CONFIG_MODULES */
-
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-        while (first <= last) {
-		const struct exception_table_entry *mid;
-		unsigned long mid_value;
-
-		mid = (last - first) / 2 + first;
-		mid_value = ex_to_addr(mid);
-                if (mid_value == value)
-                        return mid;
-                else if (mid_value < value)
-                        first = mid+1;
-                else
-                        last = mid-1;
-        }
-
-        return NULL;
-}
diff --git a/ANDROID_3.4.5/arch/alpha/mm/fault.c b/ANDROID_3.4.5/arch/alpha/mm/fault.c
deleted file mode 100644
index 5eecab1a..00000000
--- a/ANDROID_3.4.5/arch/alpha/mm/fault.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- *  linux/arch/alpha/mm/fault.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-
-#define __EXTERN_INLINE inline
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-#undef  __EXTERN_INLINE
-
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/uaccess.h>
-
-extern void die_if_kernel(char *,struct pt_regs *,long, unsigned long *);
-
-
-/*
- * Force a new ASN for a task.
- */
-
-#ifndef CONFIG_SMP
-unsigned long last_asn = ASN_FIRST_VERSION;
-#endif
-
-void
-__load_new_mm_context(struct mm_struct *next_mm)
-{
-	unsigned long mmc;
-	struct pcb_struct *pcb;
-
-	mmc = __get_new_mm_context(next_mm, smp_processor_id());
-	next_mm->context[smp_processor_id()] = mmc;
-
-	pcb = &current_thread_info()->pcb;
-	pcb->asn = mmc & HARDWARE_ASN_MASK;
-	pcb->ptbr = ((unsigned long) next_mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
-
-	__reload_thread(pcb);
-}
-
-
-/*
- * This routine handles page faults.  It determines the address,
- * and the problem, and then passes it off to handle_mm_fault().
- *
- * mmcsr:
- *	0 = translation not valid
- *	1 = access violation
- *	2 = fault-on-read
- *	3 = fault-on-execute
- *	4 = fault-on-write
- *
- * cause:
- *	-1 = instruction fetch
- *	0 = load
- *	1 = store
- *
- * Registers $9 through $15 are saved in a block just prior to `regs' and
- * are saved and restored around the call to allow exception code to
- * modify them.
- */
-
-/* Macro for exception fixup code to access integer registers.  */
-#define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+8 : (r)-10])
-
-asmlinkage void
-do_page_fault(unsigned long address, unsigned long mmcsr,
-	      long cause, struct pt_regs *regs)
-{
-	struct vm_area_struct * vma;
-	struct mm_struct *mm = current->mm;
-	const struct exception_table_entry *fixup;
-	int fault, si_code = SEGV_MAPERR;
-	siginfo_t info;
-
-	/* As of EV6, a load into $31/$f31 is a prefetch, and never faults
-	   (or is suppressed by the PALcode).  Support that for older CPUs
-	   by ignoring such an instruction.  */
-	if (cause == 0) {
-		unsigned int insn;
-		__get_user(insn, (unsigned int __user *)regs->pc);
-		if ((insn >> 21 & 0x1f) == 0x1f &&
-		    /* ldq ldl ldt lds ldg ldf ldwu ldbu */
-		    (1ul << (insn >> 26) & 0x30f00001400ul)) {
-			regs->pc += 4;
-			return;
-		}
-	}
-
-	/* If we're in an interrupt context, or have no user context,
-	   we must not take the fault.  */
-	if (!mm || in_atomic())
-		goto no_context;
-
-#ifdef CONFIG_ALPHA_LARGE_VMALLOC
-	if (address >= TASK_SIZE)
-		goto vmalloc_fault;
-#endif
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-	/* Ok, we have a good vm_area for this memory access, so
-	   we can handle it.  */
- good_area:
-	si_code = SEGV_ACCERR;
-	if (cause < 0) {
-		if (!(vma->vm_flags & VM_EXEC))
-			goto bad_area;
-	} else if (!cause) {
-		/* Allow reads even for write-only mappings */
-		if (!(vma->vm_flags & (VM_READ | VM_WRITE)))
-			goto bad_area;
-	} else {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-	}
-
-	/* If for any reason at all we couldn't handle the fault,
-	   make sure we exit gracefully rather than endlessly redo
-	   the fault.  */
-	fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0);
-	up_read(&mm->mmap_sem);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-	return;
-
-	/* Something tried to access memory that isn't in our memory map.
-	   Fix it, but check if it's kernel or user first.  */
- bad_area:
-	up_read(&mm->mmap_sem);
-
-	if (user_mode(regs))
-		goto do_sigsegv;
-
- no_context:
-	/* Are we prepared to handle this fault as an exception?  */
-	if ((fixup = search_exception_tables(regs->pc)) != 0) {
-		unsigned long newpc;
-		newpc = fixup_exception(dpf_reg, fixup, regs->pc);
-		regs->pc = newpc;
-		return;
-	}
-
-	/* Oops. The kernel tried to access some bad page. We'll have to
-	   terminate things with extreme prejudice.  */
-	printk(KERN_ALERT "Unable to handle kernel paging request at "
-	       "virtual address %016lx\n", address);
-	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
-
-	/* We ran out of memory, or some other thing happened to us that
-	   made us unable to handle the page fault gracefully.  */
- out_of_memory:
-	if (!user_mode(regs))
-		goto no_context;
-	pagefault_out_of_memory();
-	return;
-
- do_sigbus:
-	/* Send a sigbus, regardless of whether we were in kernel
-	   or user mode.  */
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *) address;
-	force_sig_info(SIGBUS, &info, current);
-	if (!user_mode(regs))
-		goto no_context;
-	return;
-
- do_sigsegv:
-	info.si_signo = SIGSEGV;
-	info.si_errno = 0;
-	info.si_code = si_code;
-	info.si_addr = (void __user *) address;
-	force_sig_info(SIGSEGV, &info, current);
-	return;
-
-#ifdef CONFIG_ALPHA_LARGE_VMALLOC
- vmalloc_fault:
-	if (user_mode(regs))
-		goto do_sigsegv;
-	else {
-		/* Synchronize this task's top level page-table
-		   with the "reference" page table from init.  */
-		long index = pgd_index(address);
-		pgd_t *pgd, *pgd_k;
-
-		pgd = current->active_mm->pgd + index;
-		pgd_k = swapper_pg_dir + index;
-		if (!pgd_present(*pgd) && pgd_present(*pgd_k)) {
-			pgd_val(*pgd) = pgd_val(*pgd_k);
-			return;
-		}
-		goto no_context;
-	}
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/alpha/mm/init.c b/ANDROID_3.4.5/arch/alpha/mm/init.c
deleted file mode 100644
index 1ad6ca74..00000000
--- a/ANDROID_3.4.5/arch/alpha/mm/init.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *  linux/arch/alpha/mm/init.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/* 2.3.x zone allocator, 1999 Andrea Arcangeli <andrea@suse.de> */
-
-#include <linux/pagemap.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/bootmem.h> /* max_low_pfn */
-#include <linux/vmalloc.h>
-#include <linux/gfp.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/hwrpb.h>
-#include <asm/dma.h>
-#include <asm/mmu_context.h>
-#include <asm/console.h>
-#include <asm/tlb.h>
-#include <asm/setup.h>
-
-extern void die_if_kernel(char *,struct pt_regs *,long);
-
-static struct pcb_struct original_pcb;
-
-pgd_t *
-pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *ret, *init;
-
-	ret = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-	init = pgd_offset(&init_mm, 0UL);
-	if (ret) {
-#ifdef CONFIG_ALPHA_LARGE_VMALLOC
-		memcpy (ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
-			(PTRS_PER_PGD - USER_PTRS_PER_PGD - 1)*sizeof(pgd_t));
-#else
-		pgd_val(ret[PTRS_PER_PGD-2]) = pgd_val(init[PTRS_PER_PGD-2]);
-#endif
-
-		/* The last PGD entry is the VPTB self-map.  */
-		pgd_val(ret[PTRS_PER_PGD-1])
-		  = pte_val(mk_pte(virt_to_page(ret), PAGE_KERNEL));
-	}
-	return ret;
-}
-
-
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving an inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-pmd_t *
-__bad_pagetable(void)
-{
-	memset((void *) EMPTY_PGT, 0, PAGE_SIZE);
-	return (pmd_t *) EMPTY_PGT;
-}
-
-pte_t
-__bad_page(void)
-{
-	memset((void *) EMPTY_PGE, 0, PAGE_SIZE);
-	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
-}
-
-static inline unsigned long
-load_PCB(struct pcb_struct *pcb)
-{
-	register unsigned long sp __asm__("$30");
-	pcb->ksp = sp;
-	return __reload_thread(pcb);
-}
-
-/* Set up initial PCB, VPTB, and other such nicities.  */
-
-static inline void
-switch_to_system_map(void)
-{
-	unsigned long newptbr;
-	unsigned long original_pcb_ptr;
-
-	/* Initialize the kernel's page tables.  Linux puts the vptb in
-	   the last slot of the L1 page table.  */
-	memset(swapper_pg_dir, 0, PAGE_SIZE);
-	newptbr = ((unsigned long) swapper_pg_dir - PAGE_OFFSET) >> PAGE_SHIFT;
-	pgd_val(swapper_pg_dir[1023]) =
-		(newptbr << 32) | pgprot_val(PAGE_KERNEL);
-
-	/* Set the vptb.  This is often done by the bootloader, but 
-	   shouldn't be required.  */
-	if (hwrpb->vptb != 0xfffffffe00000000UL) {
-		wrvptptr(0xfffffffe00000000UL);
-		hwrpb->vptb = 0xfffffffe00000000UL;
-		hwrpb_update_checksum(hwrpb);
-	}
-
-	/* Also set up the real kernel PCB while we're at it.  */
-	init_thread_info.pcb.ptbr = newptbr;
-	init_thread_info.pcb.flags = 1;	/* set FEN, clear everything else */
-	original_pcb_ptr = load_PCB(&init_thread_info.pcb);
-	tbia();
-
-	/* Save off the contents of the original PCB so that we can
-	   restore the original console's page tables for a clean reboot.
-
-	   Note that the PCB is supposed to be a physical address, but
-	   since KSEG values also happen to work, folks get confused.
-	   Check this here.  */
-
-	if (original_pcb_ptr < PAGE_OFFSET) {
-		original_pcb_ptr = (unsigned long)
-			phys_to_virt(original_pcb_ptr);
-	}
-	original_pcb = *(struct pcb_struct *) original_pcb_ptr;
-}
-
-int callback_init_done;
-
-void * __init
-callback_init(void * kernel_end)
-{
-	struct crb_struct * crb;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	void *two_pages;
-
-	/* Starting at the HWRPB, locate the CRB. */
-	crb = (struct crb_struct *)((char *)hwrpb + hwrpb->crb_offset);
-
-	if (alpha_using_srm) {
-		/* Tell the console whither it is to be remapped. */
-		if (srm_fixup(VMALLOC_START, (unsigned long)hwrpb))
-			__halt();		/* "We're boned."  --Bender */
-
-		/* Edit the procedure descriptors for DISPATCH and FIXUP. */
-		crb->dispatch_va = (struct procdesc_struct *)
-			(VMALLOC_START + (unsigned long)crb->dispatch_va
-			 - crb->map[0].va);
-		crb->fixup_va = (struct procdesc_struct *)
-			(VMALLOC_START + (unsigned long)crb->fixup_va
-			 - crb->map[0].va);
-	}
-
-	switch_to_system_map();
-
-	/* Allocate one PGD and one PMD.  In the case of SRM, we'll need
-	   these to actually remap the console.  There is an assumption
-	   here that only one of each is needed, and this allows for 8MB.
-	   On systems with larger consoles, additional pages will be
-	   allocated as needed during the mapping process.
-
-	   In the case of not SRM, but not CONFIG_ALPHA_LARGE_VMALLOC,
-	   we need to allocate the PGD we use for vmalloc before we start
-	   forking other tasks.  */
-
-	two_pages = (void *)
-	  (((unsigned long)kernel_end + ~PAGE_MASK) & PAGE_MASK);
-	kernel_end = two_pages + 2*PAGE_SIZE;
-	memset(two_pages, 0, 2*PAGE_SIZE);
-
-	pgd = pgd_offset_k(VMALLOC_START);
-	pgd_set(pgd, (pmd_t *)two_pages);
-	pmd = pmd_offset(pgd, VMALLOC_START);
-	pmd_set(pmd, (pte_t *)(two_pages + PAGE_SIZE));
-
-	if (alpha_using_srm) {
-		static struct vm_struct console_remap_vm;
-		unsigned long nr_pages = 0;
-		unsigned long vaddr;
-		unsigned long i, j;
-
-		/* calculate needed size */
-		for (i = 0; i < crb->map_entries; ++i)
-			nr_pages += crb->map[i].count;
-
-		/* register the vm area */
-		console_remap_vm.flags = VM_ALLOC;
-		console_remap_vm.size = nr_pages << PAGE_SHIFT;
-		vm_area_register_early(&console_remap_vm, PAGE_SIZE);
-
-		vaddr = (unsigned long)console_remap_vm.addr;
-
-		/* Set up the third level PTEs and update the virtual
-		   addresses of the CRB entries.  */
-		for (i = 0; i < crb->map_entries; ++i) {
-			unsigned long pfn = crb->map[i].pa >> PAGE_SHIFT;
-			crb->map[i].va = vaddr;
-			for (j = 0; j < crb->map[i].count; ++j) {
-				/* Newer consoles (especially on larger
-				   systems) may require more pages of
-				   PTEs. Grab additional pages as needed. */
-				if (pmd != pmd_offset(pgd, vaddr)) {
-					memset(kernel_end, 0, PAGE_SIZE);
-					pmd = pmd_offset(pgd, vaddr);
-					pmd_set(pmd, (pte_t *)kernel_end);
-					kernel_end += PAGE_SIZE;
-				}
-				set_pte(pte_offset_kernel(pmd, vaddr),
-					pfn_pte(pfn, PAGE_KERNEL));
-				pfn++;
-				vaddr += PAGE_SIZE;
-			}
-		}
-	}
-
-	callback_init_done = 1;
-	return kernel_end;
-}
-
-
-#ifndef CONFIG_DISCONTIGMEM
-/*
- * paging_init() sets up the memory map.
- */
-void __init paging_init(void)
-{
-	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-	unsigned long dma_pfn, high_pfn;
-
-	dma_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	high_pfn = max_pfn = max_low_pfn;
-
-	if (dma_pfn >= high_pfn)
-		zones_size[ZONE_DMA] = high_pfn;
-	else {
-		zones_size[ZONE_DMA] = dma_pfn;
-		zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
-	}
-
-	/* Initialize mem_map[].  */
-	free_area_init(zones_size);
-
-	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
-}
-#endif /* CONFIG_DISCONTIGMEM */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
-void
-srm_paging_stop (void)
-{
-	/* Move the vptb back to where the SRM console expects it.  */
-	swapper_pg_dir[1] = swapper_pg_dir[1023];
-	tbia();
-	wrvptptr(0x200000000UL);
-	hwrpb->vptb = 0x200000000UL;
-	hwrpb_update_checksum(hwrpb);
-
-	/* Reload the page tables that the console had in use.  */
-	load_PCB(&original_pcb);
-	tbia();
-}
-#endif
-
-#ifndef CONFIG_DISCONTIGMEM
-static void __init
-printk_memory_info(void)
-{
-	unsigned long codesize, reservedpages, datasize, initsize, tmp;
-	extern int page_is_ram(unsigned long) __init;
-	extern char _text, _etext, _data, _edata;
-	extern char __init_begin, __init_end;
-
-	/* printk all informations */
-	reservedpages = 0;
-	for (tmp = 0; tmp < max_low_pfn; tmp++)
-		/*
-		 * Only count reserved RAM pages
-		 */
-		if (page_is_ram(tmp) && PageReserved(mem_map+tmp))
-			reservedpages++;
-
-	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
-	datasize =  (unsigned long) &_edata - (unsigned long) &_data;
-	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
-
-	printk("Memory: %luk/%luk available (%luk kernel code, %luk reserved, %luk data, %luk init)\n",
-	       nr_free_pages() << (PAGE_SHIFT-10),
-	       max_mapnr << (PAGE_SHIFT-10),
-	       codesize >> 10,
-	       reservedpages << (PAGE_SHIFT-10),
-	       datasize >> 10,
-	       initsize >> 10);
-}
-
-void __init
-mem_init(void)
-{
-	max_mapnr = num_physpages = max_low_pfn;
-	totalram_pages += free_all_bootmem();
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-
-	printk_memory_info();
-}
-#endif /* CONFIG_DISCONTIGMEM */
-
-void
-free_reserved_mem(void *start, void *end)
-{
-	void *__start = start;
-	for (; __start < end; __start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(__start));
-		init_page_count(virt_to_page(__start));
-		free_page((long)__start);
-		totalram_pages++;
-	}
-}
-
-void
-free_initmem(void)
-{
-	extern char __init_begin, __init_end;
-
-	free_reserved_mem(&__init_begin, &__init_end);
-	printk ("Freeing unused kernel memory: %ldk freed\n",
-		(&__init_end - &__init_begin) >> 10);
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void
-free_initrd_mem(unsigned long start, unsigned long end)
-{
-	free_reserved_mem((void *)start, (void *)end);
-	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/mm/numa.c b/ANDROID_3.4.5/arch/alpha/mm/numa.c
deleted file mode 100644
index 3973ae39..00000000
--- a/ANDROID_3.4.5/arch/alpha/mm/numa.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- *  linux/arch/alpha/mm/numa.c
- *
- *  DISCONTIGMEM NUMA alpha support.
- *
- *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>
-#include <linux/initrd.h>
-#include <linux/pfn.h>
-#include <linux/module.h>
-
-#include <asm/hwrpb.h>
-#include <asm/pgalloc.h>
-
-pg_data_t node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(node_data);
-
-#undef DEBUG_DISCONTIG
-#ifdef DEBUG_DISCONTIG
-#define DBGDCONT(args...) printk(args)
-#else
-#define DBGDCONT(args...)
-#endif
-
-#define for_each_mem_cluster(memdesc, _cluster, i)		\
-	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
-	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
-
-static void __init show_mem_layout(void)
-{
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	int i;
-
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	printk("Raw memory layout:\n");
-	for_each_mem_cluster(memdesc, cluster, i) {
-		printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-	}
-}
-
-static void __init
-setup_memory_node(int nid, void *kernel_end)
-{
-	extern unsigned long mem_size_limit;
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	unsigned long start_kernel_pfn, end_kernel_pfn;
-	unsigned long bootmap_size, bootmap_pages, bootmap_start;
-	unsigned long start, end;
-	unsigned long node_pfn_start, node_pfn_end;
-	unsigned long node_min_pfn, node_max_pfn;
-	int i;
-	unsigned long node_datasz = PFN_UP(sizeof(pg_data_t));
-	int show_init = 0;
-
-	/* Find the bounds of current node */
-	node_pfn_start = (node_mem_start(nid)) >> PAGE_SHIFT;
-	node_pfn_end = node_pfn_start + (node_mem_size(nid) >> PAGE_SHIFT);
-	
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	/* find the bounds of this node (node_min_pfn/node_max_pfn) */
-	node_min_pfn = ~0UL;
-	node_max_pfn = 0UL;
-	for_each_mem_cluster(memdesc, cluster, i) {
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = start + cluster->numpages;
-
-		if (start >= node_pfn_end || end <= node_pfn_start)
-			continue;
-
-		if (!show_init) {
-			show_init = 1;
-			printk("Initializing bootmem allocator on Node ID %d\n", nid);
-		}
-		printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-
-		if (start < node_pfn_start)
-			start = node_pfn_start;
-		if (end > node_pfn_end)
-			end = node_pfn_end;
-
-		if (start < node_min_pfn)
-			node_min_pfn = start;
-		if (end > node_max_pfn)
-			node_max_pfn = end;
-	}
-
-	if (mem_size_limit && node_max_pfn > mem_size_limit) {
-		static int msg_shown = 0;
-		if (!msg_shown) {
-			msg_shown = 1;
-			printk("setup: forcing memory size to %ldK (from %ldK).\n",
-			       mem_size_limit << (PAGE_SHIFT - 10),
-			       node_max_pfn    << (PAGE_SHIFT - 10));
-		}
-		node_max_pfn = mem_size_limit;
-	}
-
-	if (node_min_pfn >= node_max_pfn)
-		return;
-
-	/* Update global {min,max}_low_pfn from node information. */
-	if (node_min_pfn < min_low_pfn)
-		min_low_pfn = node_min_pfn;
-	if (node_max_pfn > max_low_pfn)
-		max_pfn = max_low_pfn = node_max_pfn;
-
-	num_physpages += node_max_pfn - node_min_pfn;
-
-#if 0 /* we'll try this one again in a little while */
-	/* Cute trick to make sure our local node data is on local memory */
-	node_data[nid] = (pg_data_t *)(__va(node_min_pfn << PAGE_SHIFT));
-#endif
-	/* Quasi-mark the pg_data_t as in-use */
-	node_min_pfn += node_datasz;
-	if (node_min_pfn >= node_max_pfn) {
-		printk(" not enough mem to reserve NODE_DATA");
-		return;
-	}
-	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
-
-	printk(" Detected node memory:   start %8lu, end %8lu\n",
-	       node_min_pfn, node_max_pfn);
-
-	DBGDCONT(" DISCONTIG: node_data[%d]   is at 0x%p\n", nid, NODE_DATA(nid));
-	DBGDCONT(" DISCONTIG: NODE_DATA(%d)->bdata is at 0x%p\n", nid, NODE_DATA(nid)->bdata);
-
-	/* Find the bounds of kernel memory.  */
-	start_kernel_pfn = PFN_DOWN(KERNEL_START_PHYS);
-	end_kernel_pfn = PFN_UP(virt_to_phys(kernel_end));
-	bootmap_start = -1;
-
-	if (!nid && (node_max_pfn < end_kernel_pfn || node_min_pfn > start_kernel_pfn))
-		panic("kernel loaded out of ram");
-
-	/* Zone start phys-addr must be 2^(MAX_ORDER-1) aligned.
-	   Note that we round this down, not up - node memory
-	   has much larger alignment than 8Mb, so it's safe. */
-	node_min_pfn &= ~((1UL << (MAX_ORDER-1))-1);
-
-	/* We need to know how many physically contiguous pages
-	   we'll need for the bootmap.  */
-	bootmap_pages = bootmem_bootmap_pages(node_max_pfn-node_min_pfn);
-
-	/* Now find a good region where to allocate the bootmap.  */
-	for_each_mem_cluster(memdesc, cluster, i) {
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = start + cluster->numpages;
-
-		if (start >= node_max_pfn || end <= node_min_pfn)
-			continue;
-
-		if (end > node_max_pfn)
-			end = node_max_pfn;
-		if (start < node_min_pfn)
-			start = node_min_pfn;
-
-		if (start < start_kernel_pfn) {
-			if (end > end_kernel_pfn
-			    && end - end_kernel_pfn >= bootmap_pages) {
-				bootmap_start = end_kernel_pfn;
-				break;
-			} else if (end > start_kernel_pfn)
-				end = start_kernel_pfn;
-		} else if (start < end_kernel_pfn)
-			start = end_kernel_pfn;
-		if (end - start >= bootmap_pages) {
-			bootmap_start = start;
-			break;
-		}
-	}
-
-	if (bootmap_start == -1)
-		panic("couldn't find a contiguous place for the bootmap");
-
-	/* Allocate the bootmap and mark the whole MM as reserved.  */
-	bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start,
-					 node_min_pfn, node_max_pfn);
-	DBGDCONT(" bootmap_start %lu, bootmap_size %lu, bootmap_pages %lu\n",
-		 bootmap_start, bootmap_size, bootmap_pages);
-
-	/* Mark the free regions.  */
-	for_each_mem_cluster(memdesc, cluster, i) {
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = cluster->start_pfn + cluster->numpages;
-
-		if (start >= node_max_pfn || end <= node_min_pfn)
-			continue;
-
-		if (end > node_max_pfn)
-			end = node_max_pfn;
-		if (start < node_min_pfn)
-			start = node_min_pfn;
-
-		if (start < start_kernel_pfn) {
-			if (end > end_kernel_pfn) {
-				free_bootmem_node(NODE_DATA(nid), PFN_PHYS(start),
-					     (PFN_PHYS(start_kernel_pfn)
-					      - PFN_PHYS(start)));
-				printk(" freeing pages %ld:%ld\n",
-				       start, start_kernel_pfn);
-				start = end_kernel_pfn;
-			} else if (end > start_kernel_pfn)
-				end = start_kernel_pfn;
-		} else if (start < end_kernel_pfn)
-			start = end_kernel_pfn;
-		if (start >= end)
-			continue;
-
-		free_bootmem_node(NODE_DATA(nid), PFN_PHYS(start), PFN_PHYS(end) - PFN_PHYS(start));
-		printk(" freeing pages %ld:%ld\n", start, end);
-	}
-
-	/* Reserve the bootmap memory.  */
-	reserve_bootmem_node(NODE_DATA(nid), PFN_PHYS(bootmap_start),
-			bootmap_size, BOOTMEM_DEFAULT);
-	printk(" reserving pages %ld:%ld\n", bootmap_start, bootmap_start+PFN_UP(bootmap_size));
-
-	node_set_online(nid);
-}
-
-void __init
-setup_memory(void *kernel_end)
-{
-	int nid;
-
-	show_mem_layout();
-
-	nodes_clear(node_online_map);
-
-	min_low_pfn = ~0UL;
-	max_low_pfn = 0UL;
-	for (nid = 0; nid < MAX_NUMNODES; nid++)
-		setup_memory_node(nid, kernel_end);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	initrd_start = INITRD_START;
-	if (initrd_start) {
-		extern void *move_initrd(unsigned long);
-
-		initrd_end = initrd_start+INITRD_SIZE;
-		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		       (void *) initrd_start, INITRD_SIZE);
-
-		if ((void *)initrd_end > phys_to_virt(PFN_PHYS(max_low_pfn))) {
-			if (!move_initrd(PFN_PHYS(max_low_pfn)))
-				printk("initrd extends beyond end of memory "
-				       "(0x%08lx > 0x%p)\ndisabling initrd\n",
-				       initrd_end,
-				       phys_to_virt(PFN_PHYS(max_low_pfn)));
-		} else {
-			nid = kvaddr_to_nid(initrd_start);
-			reserve_bootmem_node(NODE_DATA(nid),
-					     virt_to_phys((void *)initrd_start),
-					     INITRD_SIZE, BOOTMEM_DEFAULT);
-		}
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-void __init paging_init(void)
-{
-	unsigned int    nid;
-	unsigned long   zones_size[MAX_NR_ZONES] = {0, };
-	unsigned long	dma_local_pfn;
-
-	/*
-	 * The old global MAX_DMA_ADDRESS per-arch API doesn't fit
-	 * in the NUMA model, for now we convert it to a pfn and
-	 * we interpret this pfn as a local per-node information.
-	 * This issue isn't very important since none of these machines
-	 * have legacy ISA slots anyways.
-	 */
-	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
-	for_each_online_node(nid) {
-		bootmem_data_t *bdata = &bootmem_node_data[nid];
-		unsigned long start_pfn = bdata->node_min_pfn;
-		unsigned long end_pfn = bdata->node_low_pfn;
-
-		if (dma_local_pfn >= end_pfn - start_pfn)
-			zones_size[ZONE_DMA] = end_pfn - start_pfn;
-		else {
-			zones_size[ZONE_DMA] = dma_local_pfn;
-			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
-		}
-		node_set_state(nid, N_NORMAL_MEMORY);
-		free_area_init_node(nid, zones_size, start_pfn, NULL);
-	}
-
-	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
-}
-
-void __init mem_init(void)
-{
-	unsigned long codesize, reservedpages, datasize, initsize, pfn;
-	extern int page_is_ram(unsigned long) __init;
-	extern char _text, _etext, _data, _edata;
-	extern char __init_begin, __init_end;
-	unsigned long nid, i;
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
-	reservedpages = 0;
-	for_each_online_node(nid) {
-		/*
-		 * This will free up the bootmem, ie, slot 0 memory
-		 */
-		totalram_pages += free_all_bootmem_node(NODE_DATA(nid));
-
-		pfn = NODE_DATA(nid)->node_start_pfn;
-		for (i = 0; i < node_spanned_pages(nid); i++, pfn++)
-			if (page_is_ram(pfn) &&
-			    PageReserved(nid_page_nr(nid, i)))
-				reservedpages++;
-	}
-
-	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
-	datasize =  (unsigned long) &_edata - (unsigned long) &_data;
-	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
-
-	printk("Memory: %luk/%luk available (%luk kernel code, %luk reserved, "
-	       "%luk data, %luk init)\n",
-	       nr_free_pages() << (PAGE_SHIFT-10),
-	       num_physpages << (PAGE_SHIFT-10),
-	       codesize >> 10,
-	       reservedpages << (PAGE_SHIFT-10),
-	       datasize >> 10,
-	       initsize >> 10);
-#if 0
-	mem_stress();
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/Makefile b/ANDROID_3.4.5/arch/alpha/oprofile/Makefile
deleted file mode 100644
index 3473de75..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-ccflags-y := -Werror -Wno-sign-compare
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) common.o
-oprofile-$(CONFIG_ALPHA_GENERIC)	+= op_model_ev4.o \
-					   op_model_ev5.o \
-					   op_model_ev6.o \
-					   op_model_ev67.o
-oprofile-$(CONFIG_ALPHA_EV4)		+= op_model_ev4.o
-oprofile-$(CONFIG_ALPHA_EV5)		+= op_model_ev5.o
-oprofile-$(CONFIG_ALPHA_EV6)		+= op_model_ev6.o \
-					   op_model_ev67.o
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/common.c b/ANDROID_3.4.5/arch/alpha/oprofile/common.c
deleted file mode 100644
index a0a5d27a..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/common.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/**
- * @file arch/alpha/oprofile/common.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-extern struct op_axp_model op_model_ev4 __attribute__((weak));
-extern struct op_axp_model op_model_ev5 __attribute__((weak));
-extern struct op_axp_model op_model_pca56 __attribute__((weak));
-extern struct op_axp_model op_model_ev6 __attribute__((weak));
-extern struct op_axp_model op_model_ev67 __attribute__((weak));
-
-static struct op_axp_model *model;
-
-extern void (*perf_irq)(unsigned long, struct pt_regs *);
-static void (*save_perf_irq)(unsigned long, struct pt_regs *);
-
-static struct op_counter_config ctr[20];
-static struct op_system_config sys;
-static struct op_register_config reg;
-
-/* Called from do_entInt to handle the performance monitor interrupt.  */
-
-static void
-op_handle_interrupt(unsigned long which, struct pt_regs *regs)
-{
-	model->handle_interrupt(which, regs, ctr);
-
-	/* If the user has selected an interrupt frequency that is
-	   not exactly the width of the counter, write a new value
-	   into the counter such that it'll overflow after N more
-	   events.  */
-	if ((reg.need_reset >> which) & 1)
-		model->reset_ctr(&reg, which);
-}
- 
-static int
-op_axp_setup(void)
-{
-	unsigned long i, e;
-
-	/* Install our interrupt handler into the existing hook.  */
-	save_perf_irq = perf_irq;
-	perf_irq = op_handle_interrupt;
-
-	/* Compute the mask of enabled counters.  */
-	for (i = e = 0; i < model->num_counters; ++i)
-		if (ctr[i].enabled)
-			e |= 1 << i;
-	reg.enable = e;
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(&reg, ctr, &sys);
-
-	/* Configure the registers on all cpus.  */
-	(void)smp_call_function(model->cpu_setup, &reg, 1);
-	model->cpu_setup(&reg);
-	return 0;
-}
-
-static void
-op_axp_shutdown(void)
-{
-	/* Remove our interrupt handler.  We may be removing this module.  */
-	perf_irq = save_perf_irq;
-}
-
-static void
-op_axp_cpu_start(void *dummy)
-{
-	wrperfmon(1, reg.enable);
-}
-
-static int
-op_axp_start(void)
-{
-	(void)smp_call_function(op_axp_cpu_start, NULL, 1);
-	op_axp_cpu_start(NULL);
-	return 0;
-}
-
-static inline void
-op_axp_cpu_stop(void *dummy)
-{
-	/* Disable performance monitoring for all counters.  */
-	wrperfmon(0, -1);
-}
-
-static void
-op_axp_stop(void)
-{
-	(void)smp_call_function(op_axp_cpu_stop, NULL, 1);
-	op_axp_cpu_stop(NULL);
-}
-
-static int
-op_axp_create_files(struct super_block *sb, struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-                oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		/* Dummies.  */
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	if (model->can_set_proc_mode) {
-		oprofilefs_create_ulong(sb, root, "enable_pal",
-					&sys.enable_pal);
-		oprofilefs_create_ulong(sb, root, "enable_kernel",
-					&sys.enable_kernel);
-		oprofilefs_create_ulong(sb, root, "enable_user",
-					&sys.enable_user);
-	}
-
-	return 0;
-}
-
-int __init
-oprofile_arch_init(struct oprofile_operations *ops)
-{
-	struct op_axp_model *lmodel = NULL;
-
-	switch (implver()) {
-	case IMPLVER_EV4:
-		lmodel = &op_model_ev4;
-		break;
-	case IMPLVER_EV5:
-		/* 21164PC has a slightly different set of events.
-		   Recognize the chip by the presence of the MAX insns.  */
-		if (!amask(AMASK_MAX))
-			lmodel = &op_model_pca56;
-		else
-			lmodel = &op_model_ev5;
-		break;
-	case IMPLVER_EV6:
-		/* 21264A supports ProfileMe.
-		   Recognize the chip by the presence of the CIX insns.  */
-		if (!amask(AMASK_CIX))
-			lmodel = &op_model_ev67;
-		else
-			lmodel = &op_model_ev6;
-		break;
-	}
-
-	if (!lmodel)
-		return -ENODEV;
-	model = lmodel;
-
-	ops->create_files = op_axp_create_files;
-	ops->setup = op_axp_setup;
-	ops->shutdown = op_axp_shutdown;
-	ops->start = op_axp_start;
-	ops->stop = op_axp_stop;
-	ops->cpu_type = lmodel->cpu_type;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       lmodel->cpu_type);
-
-	return 0;
-}
-
-
-void
-oprofile_arch_exit(void)
-{
-}
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/op_impl.h b/ANDROID_3.4.5/arch/alpha/oprofile/op_impl.h
deleted file mode 100644
index b2b87ae9..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/op_impl.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_impl.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Dummies because I am too lazy to hack the userspace tools.  */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-	unsigned long enable_pal;
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Cached values for the various performance monitoring registers.  */
-struct op_register_config {
-	unsigned long enable;
-	unsigned long mux_select;
-	unsigned long proc_mode;
-	unsigned long freq;
-	unsigned long reset_values;
-	unsigned long need_reset;
-};
-
-/* Per-architecture configuration and hooks.  */
-struct op_axp_model {
-	void (*reg_setup) (struct op_register_config *,
-			   struct op_counter_config *,
-			   struct op_system_config *);
-	void (*cpu_setup) (void *);
-	void (*reset_ctr) (struct op_register_config *, unsigned long);
-	void (*handle_interrupt) (unsigned long, struct pt_regs *,
-				  struct op_counter_config *);
-	char *cpu_type;
-	unsigned char num_counters;
-	unsigned char can_set_proc_mode;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev4.c b/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev4.c
deleted file mode 100644
index 18aa9b4f..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev4.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev4.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev4_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	unsigned long ctl = 0, count, hilo;
-
-	/* Select desired events.  We've mapped the event numbers
-	   such that they fit directly into the event selection fields.
-
-	   Note that there is no "off" setting.  In both cases we select
-	   the EXTERNAL event source, hoping that it'll be the lowest
-	   frequency, and set the frequency counter to LOW.  The interrupts
-	   for these "disabled" counter overflows are ignored by the
-	   interrupt handler.
-
-	   This is most irritating, because the hardware *can* enable and
-	   disable the interrupts for these counters independently, but the
-	   wrperfmon interface doesn't allow it.  */
-
-	ctl |= (ctr[0].enabled ? ctr[0].event << 8 : 14 << 8);
-	ctl |= (ctr[1].enabled ? (ctr[1].event - 16) << 32 : 7ul << 32);
-
-	/* EV4 can not read or write its counter registers.  The only
-	   thing one can do at all is see if you overflow and get an
-	   interrupt.  We can set the width of the counters, to some
-	   extent.  Take the interrupt count selected by the user,
-	   map it onto one of the possible values, and write it back.  */
-
-	count = ctr[0].count;
-	if (count <= 4096)
-		count = 4096, hilo = 1;
-	else
-		count = 65536, hilo = 0;
-	ctr[0].count = count;
-	ctl |= (ctr[0].enabled && hilo) << 3;
-
-	count = ctr[1].count;
-	if (count <= 256)
-		count = 256, hilo = 1;
-	else
-		count = 4096, hilo = 0;
-	ctr[1].count = count;
-	ctl |= (ctr[1].enabled && hilo);
-
-	reg->mux_select = ctl;
-
-	/* Select performance monitoring options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV4 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* Frequency is folded into mux_select for EV4.  */
-	reg->freq = 0;
-
-	/* See above regarding no writes.  */
-	reg->reset_values = 0;
-	reg->need_reset = 0;
-
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev4_cpu_setup(void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-}
-
-static void
-ev4_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* EV4 can't properly disable counters individually.
-	   Discard "disabled" events now.  */
-	if (!ctr[which].enabled)
-		return;
-
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev4 = {
-	.reg_setup		= ev4_reg_setup,
-	.cpu_setup		= ev4_cpu_setup,
-	.reset_ctr		= NULL,
-	.handle_interrupt	= ev4_handle_interrupt,
-	.cpu_type		= "alpha/ev4",
-	.num_counters		= 2,
-	.can_set_proc_mode	= 0,
-};
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c b/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c
deleted file mode 100644
index c32f8a0a..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev5.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.
-
-   The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and
-   meaning of the "CBOX" events.  Given that we don't care about meaning
-   at this point, arrange for the difference in bit placement to be
-   handled by common code.  */
-
-static void
-common_reg_setup(struct op_register_config *reg,
-		 struct op_counter_config *ctr,
-		 struct op_system_config *sys,
-		 int cbox1_ofs, int cbox2_ofs)
-{
-	int i, ctl, reset, need_reset;
-
-	/* Select desired events.  The event numbers are selected such
-	   that they map directly into the event selection fields:
-
-		PCSEL0:	0, 1
-		PCSEL1:	24-39
-		 CBOX1: 40-47
-		PCSEL2: 48-63
-		 CBOX2: 64-71
-
-	   There are two special cases, in that CYCLES can be measured
-	   on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12].
-	   These event numbers are canonicalizes to their first appearance.  */
-
-	ctl = 0;
-	for (i = 0; i < 3; ++i) {
-		unsigned long event = ctr[i].event;
-		if (!ctr[i].enabled)
-			continue;
-
-		/* Remap the duplicate events, as described above.  */
-		if (i == 2) {
-			if (event == 0)
-				event = 12+48;
-			else if (event == 2+41)
-				event = 4+65;
-		}
-
-		/* Convert the event numbers onto mux_select bit mask.  */
-		if (event < 2)
-			ctl |= event << 31;
-		else if (event < 24)
-			/* error */;
-		else if (event < 40)
-			ctl |= (event - 24) << 4;
-		else if (event < 48)
-			ctl |= (event - 40) << cbox1_ofs | 15 << 4;
-		else if (event < 64)
-			ctl |= event - 48;
-		else if (event < 72)
-			ctl |= (event - 64) << cbox2_ofs | 15;
-	}
-	reg->mux_select = ctl;
-
-	/* Select processor mode.  */
-	/* ??? Need to come up with some mechanism to trace only selected
-	   processes.  For now select from pal, kernel and user mode.  */
-	ctl = 0;
-	ctl |= !sys->enable_pal << 9;
-	ctl |= !sys->enable_kernel << 8;
-	ctl |= !sys->enable_user << 30;
-	reg->proc_mode = ctl;
-
-	/* Select interrupt frequencies.  Take the interrupt count selected
-	   by the user, and map it onto one of the possible counter widths.
-	   If the user value is in between, compute a value to which the
-	   counter is reset at each interrupt.  */
-
-	ctl = reset = need_reset = 0;
-	for (i = 0; i < 3; ++i) {
-		unsigned long max, hilo, count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count <= 256)
-			count = 256, hilo = 3, max = 256;
-		else {
-			max = (i == 2 ? 16384 : 65536);
-			hilo = 2;
-			if (count > max)
-				count = max;
-		}
-		ctr[i].count = count;
-
-		ctl |= hilo << (8 - i*2);
-		reset |= (max - count) << (48 - 16*i);
-		if (count != max)
-			need_reset |= 1 << i;
-	}
-	reg->freq = ctl;
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-static void
-ev5_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	common_reg_setup(reg, ctr, sys, 19, 22);
-}
-
-static void
-pca56_reg_setup(struct op_register_config *reg,
-	        struct op_counter_config *ctr,
-	        struct op_system_config *sys)
-{
-	common_reg_setup(reg, ctr, sys, 8, 11);
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev5_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(4, reg->freq);
-	wrperfmon(6, reg->reset_values);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.
-
-   For EV5, this means disabling profiling, reading the current values,
-   masking in the value for the desired register, writing, then turning
-   profiling back on.
-
-   This can be streamlined if profiling is only enabled for user mode.
-   In that case we know that the counters are not currently incrementing
-   (due to being in kernel mode).  */
-
-static void
-ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	unsigned long values, mask, not_pk, reset_values;
-
-	mask = (ctr == 0 ? 0xfffful << 48
-	        : ctr == 1 ? 0xfffful << 32
-		: 0x3fff << 16);
-
-	not_pk = 1 << 9 | 1 << 8;
-
-	reset_values = reg->reset_values;
-
-	if ((reg->proc_mode & not_pk) == not_pk) {
-		values = wrperfmon(5, 0);
-		values = (reset_values & mask) | (values & ~mask & -2);
-		wrperfmon(6, values);
-	} else {
-		wrperfmon(0, -1);
-		values = wrperfmon(5, 0);
-		values = (reset_values & mask) | (values & ~mask & -2);
-		wrperfmon(6, values);
-		wrperfmon(1, reg->enable);
-	}
-}
-
-static void
-ev5_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev5 = {
-	.reg_setup		= ev5_reg_setup,
-	.cpu_setup		= ev5_cpu_setup,
-	.reset_ctr		= ev5_reset_ctr,
-	.handle_interrupt	= ev5_handle_interrupt,
-	.cpu_type		= "alpha/ev5",
-	.num_counters		= 3,
-	.can_set_proc_mode	= 1,
-};
-
-struct op_axp_model op_model_pca56 = {
-	.reg_setup		= pca56_reg_setup,
-	.cpu_setup		= ev5_cpu_setup,
-	.reset_ctr		= ev5_reset_ctr,
-	.handle_interrupt	= ev5_handle_interrupt,
-	.cpu_type		= "alpha/pca56",
-	.num_counters		= 3,
-	.can_set_proc_mode	= 1,
-};
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev6.c b/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev6.c
deleted file mode 100644
index 1c84cc25..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev6.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev6.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev6_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	unsigned long ctl, reset, need_reset, i;
-
-	/* Select desired events.  We've mapped the event numbers
-	   such that they fit directly into the event selection fields.  */
-	ctl = 0;
-	if (ctr[0].enabled && ctr[0].event)
-		ctl |= (ctr[0].event & 1) << 4;
-	if (ctr[1].enabled)
-		ctl |= (ctr[1].event - 2) & 15;
-	reg->mux_select = ctl;
-
-	/* Select logging options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV6 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* EV6 cannot change the width of the counters as with the
-	   other implementations.  But fortunately, we can write to
-	   the counters and set the value such that it will overflow
-	   at the right time.  */
-	reset = need_reset = 0;
-	for (i = 0; i < 2; ++i) {
-		unsigned long count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count > 0x100000)
-			count = 0x100000;
-		ctr[i].count = count;
-		reset |= (0x100000 - count) << (i ? 6 : 28);
-		if (count != 0x100000)
-			need_reset |= 1 << i;
-	}
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev6_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(6, reg->reset_values | 3);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.  */
-
-static void
-ev6_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	wrperfmon(6, reg->reset_values | (1 << ctr));
-}
-
-static void
-ev6_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev6 = {
-	.reg_setup		= ev6_reg_setup,
-	.cpu_setup		= ev6_cpu_setup,
-	.reset_ctr		= ev6_reset_ctr,
-	.handle_interrupt	= ev6_handle_interrupt,
-	.cpu_type		= "alpha/ev6",
-	.num_counters		= 2,
-	.can_set_proc_mode	= 0,
-};
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev67.c b/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev67.c
deleted file mode 100644
index 34a57a12..00000000
--- a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev67.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev67.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- * @author Falk Hueffner <falk@debian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev67_reg_setup(struct op_register_config *reg,
-	       struct op_counter_config *ctr,
-	       struct op_system_config *sys)
-{
-	unsigned long ctl, reset, need_reset, i;
-
-	/* Select desired events.  */
-	ctl = 1UL << 4;		/* Enable ProfileMe mode. */
-
-	/* The event numbers are chosen so we can use them directly if
-	   PCTR1 is enabled.  */
-	if (ctr[1].enabled) {
-		ctl |= (ctr[1].event & 3) << 2;
-	} else {
-		if (ctr[0].event == 0) /* cycles */
-			ctl |= 1UL << 2;
-	}
-	reg->mux_select = ctl;
-
-	/* Select logging options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV67 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* EV67 cannot change the width of the counters as with the
-	   other implementations.  But fortunately, we can write to
-	   the counters and set the value such that it will overflow
-	   at the right time.  */
-	reset = need_reset = 0;
-	for (i = 0; i < 2; ++i) {
-		unsigned long count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count > 0x100000)
-			count = 0x100000;
-		ctr[i].count = count;
-		reset |= (0x100000 - count) << (i ? 6 : 28);
-		if (count != 0x100000)
-			need_reset |= 1 << i;
-	}
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev67_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(6, reg->reset_values | 3);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.  */
-
-static void
-ev67_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	wrperfmon(6, reg->reset_values | (1 << ctr));
-}
-
-/* ProfileMe conditions which will show up as counters. We can also
-   detect the following, but it seems unlikely that anybody is
-   interested in counting them:
-    * Reset
-    * MT_FPCR (write to floating point control register)
-    * Arithmetic trap
-    * Dstream Fault
-    * Machine Check (ECC fault, etc.)
-    * OPCDEC (illegal opcode)
-    * Floating point disabled
-    * Differentiate between DTB single/double misses and 3 or 4 level
-      page tables
-    * Istream access violation
-    * Interrupt
-    * Icache Parity Error.
-    * Instruction killed (nop, trapb)
-
-   Unfortunately, there seems to be no way to detect Dcache and Bcache
-   misses; the latter could be approximated by making the counter
-   count Bcache misses, but that is not precise.
-
-   We model this as 20 counters:
-    * PCTR0
-    * PCTR1
-    * 9 ProfileMe events, induced by PCTR0
-    * 9 ProfileMe events, induced by PCTR1
-*/
-
-enum profileme_counters {
-	PM_STALLED,		/* Stalled for at least one cycle
-				   between the fetch and map stages  */
-	PM_TAKEN,		/* Conditional branch taken */
-	PM_MISPREDICT,		/* Branch caused mispredict trap */
-	PM_ITB_MISS,		/* ITB miss */
-	PM_DTB_MISS,		/* DTB miss */
-	PM_REPLAY,		/* Replay trap */
-	PM_LOAD_STORE,		/* Load-store order trap */
-	PM_ICACHE_MISS,		/* Icache miss */
-	PM_UNALIGNED,		/* Unaligned Load/Store */
-	PM_NUM_COUNTERS
-};
-
-static inline void
-op_add_pm(unsigned long pc, int kern, unsigned long counter,
-	  struct op_counter_config *ctr, unsigned long event)
-{
-	unsigned long fake_counter = 2 + event;
-	if (counter == 1)
-		fake_counter += PM_NUM_COUNTERS;
-	if (ctr[fake_counter].enabled)
-		oprofile_add_pc(pc, kern, fake_counter);
-}
-
-static void
-ev67_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		      struct op_counter_config *ctr)
-{
-	unsigned long pmpc, pctr_ctl;
-	int kern = !user_mode(regs);
-	int mispredict = 0;
-	union {
-		unsigned long v;
-		struct {
-			unsigned reserved:	30; /*  0-29 */
-			unsigned overcount:	 3; /* 30-32 */
-			unsigned icache_miss:	 1; /*    33 */
-			unsigned trap_type:	 4; /* 34-37 */
-			unsigned load_store:	 1; /*    38 */
-			unsigned trap:		 1; /*    39 */
-			unsigned mispredict:	 1; /*    40 */
-		} fields;
-	} i_stat;
-
-	enum trap_types {
-		TRAP_REPLAY,
-		TRAP_INVALID0,
-		TRAP_DTB_DOUBLE_MISS_3,
-		TRAP_DTB_DOUBLE_MISS_4,
-		TRAP_FP_DISABLED,
-		TRAP_UNALIGNED,
-		TRAP_DTB_SINGLE_MISS,
-		TRAP_DSTREAM_FAULT,
-		TRAP_OPCDEC,
-		TRAP_INVALID1,
-		TRAP_MACHINE_CHECK,
-		TRAP_INVALID2,
-		TRAP_ARITHMETIC,
-		TRAP_INVALID3,
-		TRAP_MT_FPCR,
-		TRAP_RESET
-	};
-
-	pmpc = wrperfmon(9, 0);
-	/* ??? Don't know how to handle physical-mode PALcode address.  */
-	if (pmpc & 1)
-		return;
-	pmpc &= ~2;		/* clear reserved bit */
-
-	i_stat.v = wrperfmon(8, 0);
-	if (i_stat.fields.trap) {
-		switch (i_stat.fields.trap_type) {
-		case TRAP_INVALID1:
-		case TRAP_INVALID2:
-		case TRAP_INVALID3:
-			/* Pipeline redirection occurred. PMPC points
-			   to PALcode. Recognize ITB miss by PALcode
-			   offset address, and get actual PC from
-			   EXC_ADDR.  */
-			oprofile_add_pc(regs->pc, kern, which);
-			if ((pmpc & ((1 << 15) - 1)) ==  581)
-				op_add_pm(regs->pc, kern, which,
-					  ctr, PM_ITB_MISS);
-			/* Most other bit and counter values will be
-			   those for the first instruction in the
-			   fault handler, so we're done.  */
-			return;
-		case TRAP_REPLAY:
-			op_add_pm(pmpc, kern, which, ctr,
-				  (i_stat.fields.load_store
-				   ? PM_LOAD_STORE : PM_REPLAY));
-			break;
-		case TRAP_DTB_DOUBLE_MISS_3:
-		case TRAP_DTB_DOUBLE_MISS_4:
-		case TRAP_DTB_SINGLE_MISS:
-			op_add_pm(pmpc, kern, which, ctr, PM_DTB_MISS);
-			break;
-		case TRAP_UNALIGNED:
-			op_add_pm(pmpc, kern, which, ctr, PM_UNALIGNED);
-			break;
-		case TRAP_INVALID0:
-		case TRAP_FP_DISABLED:
-		case TRAP_DSTREAM_FAULT:
-		case TRAP_OPCDEC:
-		case TRAP_MACHINE_CHECK:
-		case TRAP_ARITHMETIC:
-		case TRAP_MT_FPCR:
-		case TRAP_RESET:
-			break;
-		}
-
-		/* ??? JSR/JMP/RET/COR or HW_JSR/HW_JMP/HW_RET/HW_COR
-		   mispredicts do not set this bit but can be
-		   recognized by the presence of one of these
-		   instructions at the PMPC location with bit 39
-		   set.  */
-		if (i_stat.fields.mispredict) {
-			mispredict = 1;
-			op_add_pm(pmpc, kern, which, ctr, PM_MISPREDICT);
-		}
-	}
-
-	oprofile_add_pc(pmpc, kern, which);
-
-	pctr_ctl = wrperfmon(5, 0);
-	if (pctr_ctl & (1UL << 27))
-		op_add_pm(pmpc, kern, which, ctr, PM_STALLED);
-
-	/* Unfortunately, TAK is undefined on mispredicted branches.
-	   ??? It is also undefined for non-cbranch insns, should
-	   check that.  */
-	if (!mispredict && pctr_ctl & (1UL << 0))
-		op_add_pm(pmpc, kern, which, ctr, PM_TAKEN);
-}
-
-struct op_axp_model op_model_ev67 = {
-	.reg_setup		= ev67_reg_setup,
-	.cpu_setup		= ev67_cpu_setup,
-	.reset_ctr		= ev67_reset_ctr,
-	.handle_interrupt	= ev67_handle_interrupt,
-	.cpu_type		= "alpha/ev67",
-	.num_counters		= 20,
-	.can_set_proc_mode	= 0,
-};