diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c | 210 |
1 files changed, 0 insertions, 210 deletions
diff --git a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c b/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c deleted file mode 100644 index c32f8a0a..00000000 --- a/ANDROID_3.4.5/arch/alpha/oprofile/op_model_ev5.c +++ /dev/null @@ -1,210 +0,0 @@ -/** - * @file arch/alpha/oprofile/op_model_ev5.c - * - * @remark Copyright 2002 OProfile authors - * @remark Read the file COPYING - * - * @author Richard Henderson <rth@twiddle.net> - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <asm/ptrace.h> - -#include "op_impl.h" - - -/* Compute all of the registers in preparation for enabling profiling. - - The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and - meaning of the "CBOX" events. Given that we don't care about meaning - at this point, arrange for the difference in bit placement to be - handled by common code. */ - -static void -common_reg_setup(struct op_register_config *reg, - struct op_counter_config *ctr, - struct op_system_config *sys, - int cbox1_ofs, int cbox2_ofs) -{ - int i, ctl, reset, need_reset; - - /* Select desired events. The event numbers are selected such - that they map directly into the event selection fields: - - PCSEL0: 0, 1 - PCSEL1: 24-39 - CBOX1: 40-47 - PCSEL2: 48-63 - CBOX2: 64-71 - - There are two special cases, in that CYCLES can be measured - on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12]. - These event numbers are canonicalizes to their first appearance. */ - - ctl = 0; - for (i = 0; i < 3; ++i) { - unsigned long event = ctr[i].event; - if (!ctr[i].enabled) - continue; - - /* Remap the duplicate events, as described above. */ - if (i == 2) { - if (event == 0) - event = 12+48; - else if (event == 2+41) - event = 4+65; - } - - /* Convert the event numbers onto mux_select bit mask. */ - if (event < 2) - ctl |= event << 31; - else if (event < 24) - /* error */; - else if (event < 40) - ctl |= (event - 24) << 4; - else if (event < 48) - ctl |= (event - 40) << cbox1_ofs | 15 << 4; - else if (event < 64) - ctl |= event - 48; - else if (event < 72) - ctl |= (event - 64) << cbox2_ofs | 15; - } - reg->mux_select = ctl; - - /* Select processor mode. */ - /* ??? Need to come up with some mechanism to trace only selected - processes. For now select from pal, kernel and user mode. */ - ctl = 0; - ctl |= !sys->enable_pal << 9; - ctl |= !sys->enable_kernel << 8; - ctl |= !sys->enable_user << 30; - reg->proc_mode = ctl; - - /* Select interrupt frequencies. Take the interrupt count selected - by the user, and map it onto one of the possible counter widths. - If the user value is in between, compute a value to which the - counter is reset at each interrupt. */ - - ctl = reset = need_reset = 0; - for (i = 0; i < 3; ++i) { - unsigned long max, hilo, count = ctr[i].count; - if (!ctr[i].enabled) - continue; - - if (count <= 256) - count = 256, hilo = 3, max = 256; - else { - max = (i == 2 ? 16384 : 65536); - hilo = 2; - if (count > max) - count = max; - } - ctr[i].count = count; - - ctl |= hilo << (8 - i*2); - reset |= (max - count) << (48 - 16*i); - if (count != max) - need_reset |= 1 << i; - } - reg->freq = ctl; - reg->reset_values = reset; - reg->need_reset = need_reset; -} - -static void -ev5_reg_setup(struct op_register_config *reg, - struct op_counter_config *ctr, - struct op_system_config *sys) -{ - common_reg_setup(reg, ctr, sys, 19, 22); -} - -static void -pca56_reg_setup(struct op_register_config *reg, - struct op_counter_config *ctr, - struct op_system_config *sys) -{ - common_reg_setup(reg, ctr, sys, 8, 11); -} - -/* Program all of the registers in preparation for enabling profiling. */ - -static void -ev5_cpu_setup (void *x) -{ - struct op_register_config *reg = x; - - wrperfmon(2, reg->mux_select); - wrperfmon(3, reg->proc_mode); - wrperfmon(4, reg->freq); - wrperfmon(6, reg->reset_values); -} - -/* CTR is a counter for which the user has requested an interrupt count - in between one of the widths selectable in hardware. Reset the count - for CTR to the value stored in REG->RESET_VALUES. - - For EV5, this means disabling profiling, reading the current values, - masking in the value for the desired register, writing, then turning - profiling back on. - - This can be streamlined if profiling is only enabled for user mode. - In that case we know that the counters are not currently incrementing - (due to being in kernel mode). */ - -static void -ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr) -{ - unsigned long values, mask, not_pk, reset_values; - - mask = (ctr == 0 ? 0xfffful << 48 - : ctr == 1 ? 0xfffful << 32 - : 0x3fff << 16); - - not_pk = 1 << 9 | 1 << 8; - - reset_values = reg->reset_values; - - if ((reg->proc_mode & not_pk) == not_pk) { - values = wrperfmon(5, 0); - values = (reset_values & mask) | (values & ~mask & -2); - wrperfmon(6, values); - } else { - wrperfmon(0, -1); - values = wrperfmon(5, 0); - values = (reset_values & mask) | (values & ~mask & -2); - wrperfmon(6, values); - wrperfmon(1, reg->enable); - } -} - -static void -ev5_handle_interrupt(unsigned long which, struct pt_regs *regs, - struct op_counter_config *ctr) -{ - /* Record the sample. */ - oprofile_add_sample(regs, which); -} - - -struct op_axp_model op_model_ev5 = { - .reg_setup = ev5_reg_setup, - .cpu_setup = ev5_cpu_setup, - .reset_ctr = ev5_reset_ctr, - .handle_interrupt = ev5_handle_interrupt, - .cpu_type = "alpha/ev5", - .num_counters = 3, - .can_set_proc_mode = 1, -}; - -struct op_axp_model op_model_pca56 = { - .reg_setup = pca56_reg_setup, - .cpu_setup = ev5_cpu_setup, - .reset_ctr = ev5_reset_ctr, - .handle_interrupt = ev5_handle_interrupt, - .cpu_type = "alpha/pca56", - .num_counters = 3, - .can_set_proc_mode = 1, -}; |