Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 670 deletions

diff --git a/ANDROID_3.4.5/arch/alpha/Kconfig b/ANDROID_3.4.5/arch/alpha/Kconfig
deleted file mode 100644
index 22e58a99..00000000
--- a/ANDROID_3.4.5/arch/alpha/Kconfig
+++ /dev/null
@@ -1,670 +0,0 @@
-config ALPHA
-	bool
-	default y
-	select HAVE_AOUT
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_SYSCALL_WRAPPERS
-	select HAVE_IRQ_WORK
-	select HAVE_PCSPKR_PLATFORM
-	select HAVE_PERF_EVENTS
-	select HAVE_DMA_ATTRS
-	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_IRQ_PROBE
-	select AUTO_IRQ_AFFINITY if SMP
-	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARCH_HAVE_NMI_SAFE_CMPXCHG
-	help
-	  The Alpha is a 64-bit general-purpose processor designed and
-	  marketed by the Digital Equipment Corporation of blessed memory,
-	  now Hewlett-Packard.  The Alpha Linux project has a home page at
-	  <http://www.alphalinux.org/>.
-
-config 64BIT
-	def_bool y
-
-config MMU
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_CMOS_UPDATE
-        def_bool y
-
-config GENERIC_GPIO
-	bool
-
-config ZONE_DMA
-	bool
-	default y
-
-config ARCH_DMA_ADDR_T_64BIT
-	def_bool y
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
-config NEED_SG_DMA_LENGTH
-	def_bool y
-
-config GENERIC_ISA_DMA
-	bool
-	default y
-
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-
-
-menu "System setup"
-
-choice
-	prompt "Alpha system type"
-	default ALPHA_GENERIC
-	---help---
-	  This is the system type of your hardware.  A "generic" kernel will
-	  run on any supported Alpha system. However, if you configure a
-	  kernel for your specific system, it will be faster and smaller.
-
-	  To find out what type of Alpha system you have, you may want to
-	  check out the Linux/Alpha FAQ, accessible on the WWW from
-	  <http://www.alphalinux.org/>. In summary:
-
-	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
-	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
-	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
-	  Miata               Personal Workstation 433/500/600 a/au
-	  Marvel              AlphaServer ES47 / ES80 / GS1280
-	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
-	  Noritake            AS 1000A, AS 600A, AS 800
-	  PC164               AlphaPC164
-	  Rawhide             AS 1200, AS 4000, AS 4100
-	  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
-	  SX164               AlphaPC164-SX
-	  Sable               AS 2000, AS 2100
-	  Shark               DS 20L
-	  Takara              Takara (OEM)
-	  Titan               AlphaServer ES45 / DS25 / DS15
-	  Wildfire            AlphaServer GS 40/80/160/320
-
-	  If you don't know what to do, choose "generic".
-
-config ALPHA_GENERIC
-	bool "Generic"
-	help
-	  A generic kernel will run on all supported Alpha hardware.
-
-config ALPHA_ALCOR
-	bool "Alcor/Alpha-XLT"
-	help
-	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
-	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
-	  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
-	  controller (256-bit memory bus) and a PCI interface.  It also does
-	  all the work required to support an external Bcache and to maintain
-	  memory coherence when a PCI device DMAs into (or out of) memory.
-
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
-config ALPHA_DP264
-	bool "DP264"
-	help
-	  Various 21264 systems with the tsunami core logic chipset.
-	  API Networks: 264DP, UP2000(+), CS20;
-	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
-
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
-config ALPHA_EIGER
-	bool "Eiger"
-	help
-	  Apparently an obscure OEM single-board computer based on the
-	  Typhoon/Tsunami chipset family. Information on it is scanty.
-
-config ALPHA_JENSEN
-	bool "Jensen"
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
-config ALPHA_LX164
-	bool "LX164"
-	help
-	  A technical overview of this board is available at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
-
-config ALPHA_LYNX
-	bool "Lynx"
-	help
-	  AlphaServer 2100A-based systems.
-
-config ALPHA_MARVEL
-	bool "Marvel"
-	help
-	  AlphaServer ES47 / ES80 / GS1280 based on EV7.
-
-config ALPHA_MIATA
-	bool "Miata"
-	help
-	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
-	  or 600au).
-
-config ALPHA_MIKASA
-	bool "Mikasa"
-	help
-	  AlphaServer 1000-based Alpha systems.
-
-config ALPHA_NAUTILUS
-	bool "Nautilus"
-	help
-	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
-
-config ALPHA_NONAME_CH
-	bool "Noname"
-
-config ALPHA_NORITAKE
-	bool "Noritake"
-	help
-	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
-	  systems.
-
-config ALPHA_PC164
-	bool "PC164"
-
-config ALPHA_P2K
-	bool "Platform2000"
-
-config ALPHA_RAWHIDE
-	bool "Rawhide"
-	help
-	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
-	  See HOWTO at
-	  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
-
-config ALPHA_RUFFIAN
-	bool "Ruffian"
-	help
-	  Samsung APC164UX.  There is a page on known problems and workarounds
-	  at <http://www.alphalinux.org/faq/FAQ-11.html>.
-
-config ALPHA_RX164
-	bool "RX164"
-
-config ALPHA_SX164
-	bool "SX164"
-
-config ALPHA_SABLE
-	bool "Sable"
-	help
-	  Digital AlphaServer 2000 and 2100-based systems.
-
-config ALPHA_SHARK
-	bool "Shark"
-
-config ALPHA_TAKARA
-	bool "Takara"
-	help
-	  Alpha 11164-based OEM single-board computer.
-
-config ALPHA_TITAN
-	bool "Titan"
-	help
-	  AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
-
-config ALPHA_WILDFIRE
-	bool "Wildfire"
-	help
-	  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
-
-endchoice
-
-# clear all implied options (don't want default values for those):
-# Most of these machines have ISA slots; not exactly sure which don't,
-# and this doesn't activate hordes of code, so do it always.
-config ISA
-	bool
-	default y
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config ISA_DMA_API
-	bool
-	default y
-
-config PCI
-	bool
-	depends on !ALPHA_JENSEN
-	select GENERIC_PCI_IOMAP
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	default y
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config IOMMU_HELPER
-	def_bool PCI
-
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
-config ALPHA_EV4
-	bool
-	default y if ALPHA_LYNX && !ALPHA_EV5
-
-config ALPHA_CIA
-	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-	default y
-
-config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?"
-	depends on ALPHA_SABLE
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-config ALPHA_GAMMA
-	bool
-	depends on ALPHA_LYNX
-	default y
-
-config ALPHA_T2
-	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
-	default y
-
-config ALPHA_PYXIS
-	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
-	default y
-
-config ALPHA_EV6
-	bool
-	depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
-	default y
-
-config ALPHA_TSUNAMI
-	bool
-	depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
-	default y
-
-config ALPHA_EV67
-	bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
-	default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	help
-	  Is this a machine based on the EV67 core?  If in doubt, select N here
-	  and the machine will be treated as an EV6.
-
-config ALPHA_MCPCIA
-	bool
-	depends on ALPHA_RAWHIDE
-	default y
-
-config ALPHA_POLARIS
-	bool
-	depends on ALPHA_RX164
-	default y
-
-config ALPHA_IRONGATE
-	bool
-	depends on ALPHA_NAUTILUS
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y if !ALPHA_EV67
-
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
-config ALPHA_BROKEN_IRQ_MASK
-	bool
-	depends on ALPHA_GENERIC || ALPHA_PC164
-	default y
-
-config VGA_HOSE
-	bool
-	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
-	default y
-	help
-	  Support VGA on an arbitrary hose; needed for several platforms
-	  which always have multiple hoses, and whose consoles support it.
-
-
-config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
-	  There are two different types of booting firmware on Alphas: SRM,
-	  which is command line driven, and ARC, which uses menus and arrow
-	  keys. Details about the Linux/Alpha booting process are contained in
-	  the Linux/Alpha FAQ, accessible on the WWW from
-	  <http://www.alphalinux.org/>.
-
-	  The usual way to load Linux on an Alpha machine is to use MILO
-	  (a bootloader that lets you pass command line parameters to the
-	  kernel just like lilo does for the x86 architecture) which can be
-	  loaded either from ARC or can be installed directly as a permanent
-	  firmware replacement from floppy (which requires changing a certain
-	  jumper on the motherboard). If you want to do either of these, say N
-	  here. If MILO doesn't work on your system (true for Jensen
-	  motherboards), you can bypass it altogether and boot Linux directly
-	  from an SRM console; say Y here in order to do that. Note that you
-	  won't be able to boot from an IDE disk using SRM.
-
-	  If unsure, say N.
-
-config EISA
-	bool
-	depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	def_bool y
-
-config SMP
-	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
-	select USE_GENERIC_SMP_HELPERS
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, like most personal computers, say N. If
-	  you have a system with more than one CPU, say Y.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on many, but not all,
-	  singleprocessor machines. On a singleprocessor machine, the kernel
-	  will run faster if you say N here.
-
-	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you don't know what to do here, say N.
-
-config HAVE_DEC_LOCK
-	bool
-	depends on SMP
-	default y
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "32" if ALPHA_GENERIC || ALPHA_MARVEL
-	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
-	help
-	  MARVEL support can handle a maximum of 32 CPUs, all the others
-          with working support have a maximum of 4 CPUs.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous Memory Support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
-source "mm/Kconfig"
-
-config NUMA
-	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM && BROKEN
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
-
-config NODES_SHIFT
-	int
-	default "7"
-	depends on NEED_MULTIPLE_NODES
-
-# LARGE_VMALLOC is racy, if you *really* need it then fix it first
-config ALPHA_LARGE_VMALLOC
-	bool
-	---help---
-	  Process creation and other aspects of virtual memory management can
-	  be streamlined if we restrict the kernel to one PGD for all vmalloc
-	  allocations.  This equates to about 8GB.
-
-	  Under normal circumstances, this is so far and above what is needed
-	  as to be laughable.  However, there are certain applications (such
-	  as benchmark-grade in-kernel web serving) that can make use of as
-	  much vmalloc space as is available.
-
-	  Say N unless you know you need gobs and gobs of vmalloc space.
-
-config VERBOSE_MCHECK
-	bool "Verbose Machine Checks"
-
-config VERBOSE_MCHECK_ON
-	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
-	depends on VERBOSE_MCHECK
-	default 1
-	---help---
-	  This option allows the default printing mode to be set, and then
-	  possibly overridden by a boot command argument.
-
-	  For example, if one wanted the option of printing verbose
-	  machine checks, but wanted the default to be as if verbose
-	  machine check printing was turned off, then one would choose
-	  the printing mode to be 0. Then, upon reboot, one could add
-	  the boot command line "verbose_mcheck=1" to get the normal
-	  verbose machine check printing, or "verbose_mcheck=2" to get
-	  the maximum information available.
-
-	  Take the default (1) unless you want more control or more info.
-
-config HZ
-	int
-	default 1200 if ALPHA_RAWHIDE
-	default 1024
-
-source "drivers/pci/Kconfig"
-source "drivers/eisa/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config SRM_ENV
-	tristate "SRM environment through procfs"
-	depends on PROC_FS
-	---help---
-	  If you enable this option, a subdirectory inside /proc called
-	  /proc/srm_environment will give you access to the all important
-	  SRM environment variables (those which have a name) and also
-	  to all others (by their internal number).
-
-	  SRM is something like a BIOS for Alpha machines. There are some
-	  other such BIOSes, like AlphaBIOS, which this driver cannot
-	  support (hey, that's not SRM!).
-
-	  Despite the fact that this driver doesn't work on all Alphas (but
-	  only on those which have SRM as their firmware), it's save to
-	  build it even if your particular machine doesn't know about SRM
-	  (or if you intend to compile a generic kernel). It will simply
-	  not create those subdirectory in /proc (and give you some warning,
-	  of course).
-
-	  This driver is also available as a module and will be called
-	  srm_env then.
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/alpha/Kconfig.debug"
-
-# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
-# but we also need it if VGA_HOSE is set
-config DUMMY_CONSOLE
-	bool
-	depends on VGA_HOSE
-	default y
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-