Check introduction for individual books

23 files changed, 5883 insertions, 6067 deletions

diff --git a/floss-arduino.OpenModelicad b/floss-arduino.OpenModelicad
index 18e93ea..545b091 100644
--- a/floss-arduino.OpenModelicad
+++ b/floss-arduino.OpenModelicad
@@ -1,30 +1,30 @@
-\contentsline {section}{\numberline {3.{1}}An OpenModelica code/model to check whether the firmware is properly installed or not}{65}{OpenModelicamass.3.1}
+\contentsline {section}{\numberline {3.{1}}An OpenModelica code/model to check whether the firmware is properly installed or not}{65}{OpenModelicamass.3.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{91}{OpenModelicamass.4.1}
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{91}{OpenModelicamass.4.2}
-\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{92}{OpenModelicamass.4.3}
-\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{93}{OpenModelicamass.4.4}
+\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{91}{OpenModelicamass.4.1}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{91}{OpenModelicamass.4.2}%
+\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{92}{OpenModelicamass.4.3}%
+\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{93}{OpenModelicamass.4.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the output window}{111}{OpenModelicamass.5.1}
-\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{112}{OpenModelicamass.5.2}
+\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the output window}{111}{OpenModelicamass.5.1}%
+\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{112}{OpenModelicamass.5.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{132}{OpenModelicamass.6.1}
-\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{133}{OpenModelicamass.6.2}
+\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{132}{OpenModelicamass.6.1}%
+\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{133}{OpenModelicamass.6.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{147}{OpenModelicamass.7.1}
+\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{147}{OpenModelicamass.7.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{171}{OpenModelicamass.8.1}
-\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{172}{OpenModelicamass.8.2}
+\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{171}{OpenModelicamass.8.1}%
+\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{172}{OpenModelicamass.8.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{198}{OpenModelicamass.9.1}
-\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{199}{OpenModelicamass.9.2}
-\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{199}{OpenModelicamass.9.3}
-\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{200}{OpenModelicamass.9.4}
+\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{198}{OpenModelicamass.9.1}%
+\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{199}{OpenModelicamass.9.2}%
+\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{199}{OpenModelicamass.9.3}%
+\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{200}{OpenModelicamass.9.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{228}{OpenModelicamass.10.1}
-\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{229}{OpenModelicamass.10.2}
-\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{229}{OpenModelicamass.10.3}
+\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{228}{OpenModelicamass.10.1}%
+\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{229}{OpenModelicamass.10.2}%
+\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{229}{OpenModelicamass.10.3}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{254}{OpenModelicamass.11.1}
-\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{254}{OpenModelicamass.11.2}
-\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{254}{OpenModelicamass.11.3}
+\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{254}{OpenModelicamass.11.1}%
+\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{254}{OpenModelicamass.11.2}%
+\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{254}{OpenModelicamass.11.3}%
diff --git a/floss-arduino.ard b/floss-arduino.ard
index 6d7c7e9..e2cc273 100644
--- a/floss-arduino.ard
+++ b/floss-arduino.ard
@@ -1,28 +1,28 @@
-\contentsline {section}{\numberline {3.{1}}First 10 lines of the FLOSS firmware}{25}{ardmass.3.1}
+\contentsline {section}{\numberline {3.{1}}First 10 lines of the FLOSS firmware}{25}{ardmass.3.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{72}{ardmass.4.1}
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{72}{ardmass.4.2}
-\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{73}{ardmass.4.3}
-\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{73}{ardmass.4.4}
+\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{72}{ardmass.4.1}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{72}{ardmass.4.2}%
+\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{73}{ardmass.4.3}%
+\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{73}{ardmass.4.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Serial Monitor}{99}{ardmass.5.1}
-\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{99}{ardmass.5.2}
+\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Serial Monitor}{99}{ardmass.5.1}%
+\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{99}{ardmass.5.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{120}{ardmass.6.1}
-\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{120}{ardmass.6.2}
+\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{120}{ardmass.6.1}%
+\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{120}{ardmass.6.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{138}{ardmass.7.1}
+\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{138}{ardmass.7.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{154}{ardmass.8.1}
-\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{155}{ardmass.8.2}
+\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{154}{ardmass.8.1}%
+\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{155}{ardmass.8.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{178}{ardmass.9.1}
-\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{179}{ardmass.9.2}
-\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in increments}{179}{ardmass.9.3}
-\contentsline {section}{\numberline {9.{4}}Rotating the servomotor through the potentiometer}{179}{ardmass.9.4}
+\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{178}{ardmass.9.1}%
+\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{179}{ardmass.9.2}%
+\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in increments}{179}{ardmass.9.3}%
+\contentsline {section}{\numberline {9.{4}}Rotating the servomotor through the potentiometer}{179}{ardmass.9.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{208}{ardmass.10.1}
-\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{208}{ardmass.10.2}
-\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{209}{ardmass.10.3}
+\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{208}{ardmass.10.1}%
+\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{208}{ardmass.10.2}%
+\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{209}{ardmass.10.3}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {11.{1}}First 10 lines of the firmware for Modbus Energy Meter experiment}{241}{ardmass.11.1}
+\contentsline {section}{\numberline {11.{1}}First 10 lines of the firmware for Modbus Energy Meter experiment}{241}{ardmass.11.1}%
diff --git a/floss-arduino.aux b/floss-arduino.aux
index 0f2ae6b..24f4627 100644
--- a/floss-arduino.aux
+++ b/floss-arduino.aux
@@ -17,1633 +17,1633 @@
 \providecommand\HyField@AuxAddToFields[1]{}
 \providecommand\HyField@AuxAddToCoFields[2]{}
 \bibstyle{unsrt}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Figures}}{ix}{chapter*.2}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Tables}}{xiii}{chapter*.3}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Arduino \ Code}}{xv}{chapter*.4}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Scilab Code}}{xvii}{chapter*.5}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Python \ Code}}{xix}{chapter*.6}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Julia\ Code}}{xxi}{chapter*.7}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of OpenModelica\ Code}}{xxiii}{chapter*.8}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Figures}}{ix}{chapter*.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Tables}}{xiii}{chapter*.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Arduino \ Code}}{xv}{chapter*.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Scilab Code}}{xvii}{chapter*.5}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Python \ Code}}{xix}{chapter*.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Julia\ Code}}{xxi}{chapter*.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of OpenModelica\ Code}}{xxiii}{chapter*.8}\protected@file@percent }
 \@writefile{toc}{\thispagestyle {empty}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {List of Acronyms}}{xxv}{chapter*.9}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {List of Acronyms}}{xxv}{chapter*.9}\protected@file@percent }
 \citation{CNES-Scilab}
-\@writefile{toc}{\contentsline {chapter}{\numberline {1}Introduction}{1}{chapter.1}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {1}Introduction}{1}{chapter.1}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{sec:intro}{{1}{1}{Introduction}{chapter.1}{}}
 \citation{scilab-arduino}
 \newlabel{fn:file-loc}{{2}{2}{}{Hfootnote.2}{}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {2}Hardware Environment}{3}{chapter.2}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {2}Hardware Environment}{3}{chapter.2}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{sec:hw-env}{{2}{3}{Hardware Environment}{chapter.2}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {2.1}Microcontroller}{3}{section.2.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {2.1.1}Organization of a Microcontroller}{3}{subsection.2.1.1}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.1}{\ignorespaces Functional block diagram of a microcontroller\relax }}{4}{figure.caption.10}}
+\@writefile{toc}{\contentsline {section}{\numberline {2.1}Microcontroller}{3}{section.2.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.1.1}Organization of a Microcontroller}{3}{subsection.2.1.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {2.1}{\ignorespaces Functional block diagram of a microcontroller\relax }}{4}{figure.caption.10}\protected@file@percent }
 \providecommand*\caption@xref[2]{\@setref\relax\@undefined{#1}}
 \newlabel{micro-arch}{{2.1}{4}{Functional block diagram of a microcontroller\relax }{figure.caption.10}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {2.1.2}Microcontroller Peripherals}{5}{subsection.2.1.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.2}{\ignorespaces ADC resolution\relax }}{6}{figure.caption.11}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.1.2}Microcontroller Peripherals}{5}{subsection.2.1.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {2.2}{\ignorespaces ADC resolution\relax }}{6}{figure.caption.11}\protected@file@percent }
 \newlabel{resolution}{{2.2}{6}{ADC resolution\relax }{figure.caption.11}{}}
 \citation{oshw-ref}
 \citation{oshw-ref}
 \citation{OSHW-logo-ref}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.3}{\ignorespaces The logo of Open Source Hardware\relax }}{7}{figure.caption.12}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.3}{\ignorespaces The logo of Open Source Hardware\relax }}{7}{figure.caption.12}\protected@file@percent }
 \newlabel{fig:OSHW-logo}{{2.3}{7}{The logo of Open Source Hardware\relax }{figure.caption.12}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {2.2}Open Source Hardware (OSHW)}{7}{section.2.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {2.2}Open Source Hardware (OSHW)}{7}{section.2.2}\protected@file@percent }
 \newlabel{sec:oshw}{{2.2}{7}{Open Source Hardware (OSHW)}{section.2.2}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {2.3}Arduino}{8}{section.2.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {2.3.1}Brief History}{8}{subsection.2.3.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {2.3}Arduino}{8}{section.2.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.3.1}Brief History}{8}{subsection.2.3.1}\protected@file@percent }
 \citation{uno-ref}
 \citation{mega-ref}
 \citation{lily-ref}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.4}{\ignorespaces Arduino Uno Board\relax }}{9}{figure.caption.13}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.4}{\ignorespaces Arduino Uno Board\relax }}{9}{figure.caption.13}\protected@file@percent }
 \newlabel{arduino}{{2.4}{9}{Arduino Uno Board\relax }{figure.caption.13}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {2.3.2}Arduino Uno Board}{9}{subsection.2.3.2}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {2.3.3}Popular Arduino Projects}{9}{subsection.2.3.3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.3.2}Arduino Uno Board}{9}{subsection.2.3.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.3.3}Popular Arduino Projects}{9}{subsection.2.3.3}\protected@file@percent }
 \citation{phone-ref}
 \citation{candy-ref}
-\@writefile{lot}{\contentsline {table}{\numberline {2.1}{\ignorespaces Arduino Uno hardware specifications\relax }}{10}{table.caption.14}}
+\@writefile{lot}{\contentsline {table}{\numberline {2.1}{\ignorespaces Arduino Uno hardware specifications\relax }}{10}{table.caption.14}\protected@file@percent }
 \newlabel{micro-table}{{2.1}{10}{Arduino Uno hardware specifications\relax }{table.caption.14}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.5}{\ignorespaces Arduino Mega Board\relax }}{10}{figure.caption.15}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.5}{\ignorespaces Arduino Mega Board\relax }}{10}{figure.caption.15}\protected@file@percent }
 \newlabel{mega}{{2.5}{10}{Arduino Mega Board\relax }{figure.caption.15}{}}
-\@writefile{toc}{\contentsline {paragraph}{Arduino phone:}{10}{section*.17}}
+\@writefile{toc}{\contentsline {paragraph}{Arduino phone:}{10}{section*.17}\protected@file@percent }
 \citation{3d-printer-ref}
 \citation{shield-ref}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.6}{\ignorespaces LilyPad Arduino Board\relax }}{11}{figure.caption.16}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.6}{\ignorespaces LilyPad Arduino Board\relax }}{11}{figure.caption.16}\protected@file@percent }
 \newlabel{lily}{{2.6}{11}{LilyPad Arduino Board\relax }{figure.caption.16}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.7}{\ignorespaces Arduino Phone\relax }}{11}{figure.caption.18}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.7}{\ignorespaces Arduino Phone\relax }}{11}{figure.caption.18}\protected@file@percent }
 \newlabel{arduino-phone}{{2.7}{11}{Arduino Phone\relax }{figure.caption.18}{}}
-\@writefile{toc}{\contentsline {paragraph}{Candy sorting machine:}{11}{section*.19}}
-\@writefile{toc}{\contentsline {paragraph}{3D printers:}{11}{section*.20}}
-\@writefile{toc}{\contentsline {section}{\numberline {2.4}Shield}{11}{section.2.4}}
+\@writefile{toc}{\contentsline {paragraph}{Candy sorting machine:}{11}{section*.19}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{3D printers:}{11}{section*.20}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {2.4}Shield}{11}{section.2.4}\protected@file@percent }
 \citation{shield-ref}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.8}{\ignorespaces 3D printer\relax }}{12}{figure.caption.21}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.8}{\ignorespaces 3D printer\relax }}{12}{figure.caption.21}\protected@file@percent }
 \newlabel{3dprinter}{{2.8}{12}{3D printer\relax }{figure.caption.21}{}}
-\newlabel{1@xvr}{{}{12}{Shield}{section.2.4}{}}
-\newlabel{1@vr}{{}{12}{Shield}{section.2.4}{}}
-\newlabel{2@xvr}{{}{12}{Shield}{section.2.4}{}}
-\newlabel{2@vr}{{}{12}{Shield}{section.2.4}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {2.5}Experimental Test Bed}{12}{section.2.5}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.9}{\ignorespaces PCB image of the shield}}{13}{figure.caption.22}}
+\newlabel{1@xvr}{{}{12}}
+\newlabel{1@vr}{{}{12}}
+\newlabel{2@xvr}{{}{12}}
+\newlabel{2@vr}{{}{12}}
+\@writefile{toc}{\contentsline {section}{\numberline {2.5}Experimental Test Bed}{12}{section.2.5}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {2.9}{\ignorespaces PCB image of the shield}}{13}{figure.caption.22}\protected@file@percent }
 \newlabel{fig:PCB-image}{{2.9}{13}{PCB image of the shield}{figure.caption.22}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.10}{\ignorespaces Pictorial representation of the schematic of the shield\relax }}{14}{figure.caption.23}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.10}{\ignorespaces Pictorial representation of the schematic of the shield\relax }}{14}{figure.caption.23}\protected@file@percent }
 \newlabel{fig:sch-shield}{{2.10}{14}{Pictorial representation of the schematic of the shield\relax }{figure.caption.23}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.11}{\ignorespaces PCB of the shield\relax }}{14}{figure.caption.24}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.11}{\ignorespaces PCB of the shield\relax }}{14}{figure.caption.24}\protected@file@percent }
 \newlabel{fig:shield-photo}{{2.11}{14}{PCB of the shield\relax }{figure.caption.24}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {2.2}{\ignorespaces Values of components used in the shield\relax }}{15}{table.caption.25}}
+\@writefile{lot}{\contentsline {table}{\numberline {2.2}{\ignorespaces Values of components used in the shield\relax }}{15}{table.caption.25}\protected@file@percent }
 \newlabel{tab:shield-values}{{2.2}{15}{Values of components used in the shield\relax }{table.caption.25}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {2.3}{\ignorespaces Information on sensors and pin numbers\relax }}{15}{table.caption.26}}
+\@writefile{lot}{\contentsline {table}{\numberline {2.3}{\ignorespaces Information on sensors and pin numbers\relax }}{15}{table.caption.26}\protected@file@percent }
 \newlabel{shield-table}{{2.3}{15}{Information on sensors and pin numbers\relax }{table.caption.26}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {2.12}{\ignorespaces Picture of the shield with all components\relax }}{16}{figure.caption.27}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2.12}{\ignorespaces Picture of the shield with all components\relax }}{16}{figure.caption.27}\protected@file@percent }
 \newlabel{shield}{{2.12}{16}{Picture of the shield with all components\relax }{figure.caption.27}{}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {3}Communication between Software and Arduino}{17}{chapter.3}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {3}Communication between Software and Arduino}{17}{chapter.3}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{sec:sw-env}{{3}{17}{Communication between Software and Arduino}{chapter.3}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {3.1}Arduino IDE}{17}{section.3.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {3.1}Arduino IDE}{17}{section.3.1}\protected@file@percent }
 \newlabel{arduino-ide}{{3.1}{17}{Arduino IDE}{section.3.1}{}}
 \newlabel{sec:ard-start}{{3.1}{17}{Arduino IDE}{section.3.1}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.1}Downloading and installing on Windows}{18}{subsection.3.1.1}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.1}{\ignorespaces Windows device manager\relax }}{19}{figure.caption.28}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.1}Downloading and installing on Windows}{18}{subsection.3.1.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.1}{\ignorespaces Windows device manager\relax }}{19}{figure.caption.28}\protected@file@percent }
 \newlabel{win-device-manager}{{3.1}{19}{Windows device manager\relax }{figure.caption.28}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.2}Downloading and installing on GNU/Linux Ubuntu}{19}{subsection.3.1.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.2}{\ignorespaces Windows device manager\relax }}{20}{figure.caption.29}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.2}Downloading and installing on GNU/Linux Ubuntu}{19}{subsection.3.1.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.2}{\ignorespaces Windows device manager\relax }}{20}{figure.caption.29}\protected@file@percent }
 \newlabel{win-device-manager-com}{{3.2}{20}{Windows device manager\relax }{figure.caption.29}{}}
 \newlabel{itm:port-check}{{9}{20}{Downloading and installing on GNU/Linux Ubuntu}{Item.47}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.3}{\ignorespaces Windows update driver option\relax }}{21}{figure.caption.30}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.3}{\ignorespaces Windows update driver option\relax }}{21}{figure.caption.30}\protected@file@percent }
 \newlabel{win-dri-update}{{3.3}{21}{Windows update driver option\relax }{figure.caption.30}{}}
 \newlabel{itm:port-access}{{10}{21}{Downloading and installing on GNU/Linux Ubuntu}{Item.48}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.3}Arduino Development Environment}{21}{subsection.3.1.3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.3}Arduino Development Environment}{21}{subsection.3.1.3}\protected@file@percent }
 \newlabel{sec:Arduino-IDE}{{3.1.3}{21}{Arduino Development Environment}{subsection.3.1.3}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.4}{\ignorespaces Linux terminal to launch Arduino IDE\relax }}{22}{figure.caption.31}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.4}{\ignorespaces Linux terminal to launch Arduino IDE\relax }}{22}{figure.caption.31}\protected@file@percent }
 \newlabel{arduino-opt}{{3.4}{22}{Linux terminal to launch Arduino IDE\relax }{figure.caption.31}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.5}{\ignorespaces Arduino IDE\relax }}{22}{figure.caption.32}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.5}{\ignorespaces Arduino IDE\relax }}{22}{figure.caption.32}\protected@file@percent }
 \newlabel{ard-ide}{{3.5}{22}{Arduino IDE\relax }{figure.caption.32}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.4}Testing Arduino with a sample program}{24}{subsection.3.1.4}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.4}Testing Arduino with a sample program}{24}{subsection.3.1.4}\protected@file@percent }
 \newlabel{sec:testing-arduino}{{3.1.4}{24}{Testing Arduino with a sample program}{subsection.3.1.4}{}}
 \citation{scilab-ref}
 \citation{scilab-interop}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.5}FLOSS Firmware}{25}{subsection.3.1.5}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{3.{1}}{}}{25}{ardmass.3.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {3.{1}}First 10 lines of the FLOSS firmware}{25}{ardmass.3.1}}
-\newlabel{3@xvr}{{}{25}{FLOSS Firmware}{ardmass.3.1}{}}
-\newlabel{3@vr}{{}{25}{FLOSS Firmware}{ardmass.3.1}{}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.1.5}FLOSS Firmware}{25}{subsection.3.1.5}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{3.{1}}{}}{25}{ardmass.3.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {3.{1}}First 10 lines of the FLOSS firmware}{25}{ardmass.3.1}\protected@file@percent }
+\newlabel{3@xvr}{{}{25}}
+\newlabel{3@vr}{{}{25}}
 \newlabel{ard:firmware}{{3.{1}}{25}{FLOSS Firmware}{ardmass.3.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/floss-firmware/floss\textendash firmware.ino}{25}{lstlisting.3.-1}}
-\@writefile{toc}{\contentsline {section}{\numberline {3.2}Scilab}{25}{section.3.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/tools/floss-firmware/floss\textendash firmware.ino}{25}{lstlisting.3.-1}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {3.2}Scilab}{25}{section.3.2}\protected@file@percent }
 \newlabel{sec:sci-start}{{3.2}{25}{Scilab}{section.3.2}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.1}Downloading and installing on Windows}{26}{subsection.3.2.1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.1}Downloading and installing on Windows}{26}{subsection.3.2.1}\protected@file@percent }
 \newlabel{scilab-installation-windows}{{3.2.1}{26}{Downloading and installing on Windows}{subsection.3.2.1}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.2}Downloading and installing on GNU/Linux Ubuntu}{26}{subsection.3.2.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.2}Downloading and installing on GNU/Linux Ubuntu}{26}{subsection.3.2.2}\protected@file@percent }
 \newlabel{scilab-installation-linux}{{3.2.2}{26}{Downloading and installing on GNU/Linux Ubuntu}{subsection.3.2.2}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.6}{\ignorespaces Linux terminal to launch Scilab\relax }}{27}{figure.caption.33}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.6}{\ignorespaces Linux terminal to launch Scilab\relax }}{27}{figure.caption.33}\protected@file@percent }
 \newlabel{linux-cd}{{3.6}{27}{Linux terminal to launch Scilab\relax }{figure.caption.33}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.3}Scilab-Arduino toolbox}{27}{subsection.3.2.3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.3}Scilab-Arduino toolbox}{27}{subsection.3.2.3}\protected@file@percent }
 \newlabel{sec:sci-ard-toolbox}{{3.2.3}{27}{Scilab-Arduino toolbox}{subsection.3.2.3}{}}
-\newlabel{4@xvr}{{}{27}{Scilab-Arduino toolbox}{subsection.3.2.3}{}}
-\newlabel{4@vr}{{}{27}{Scilab-Arduino toolbox}{subsection.3.2.3}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.7}{\ignorespaces Browsing toolbox directory\relax }}{28}{figure.caption.34}}
+\newlabel{4@xvr}{{}{27}}
+\newlabel{4@vr}{{}{27}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.7}{\ignorespaces Browsing toolbox directory\relax }}{28}{figure.caption.34}\protected@file@percent }
 \newlabel{scilab-browse}{{3.7}{28}{Browsing toolbox directory\relax }{figure.caption.34}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.8}{\ignorespaces Output of builder.sce\relax }}{29}{figure.caption.35}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.8}{\ignorespaces Output of builder.sce\relax }}{29}{figure.caption.35}\protected@file@percent }
 \newlabel{builder}{{3.8}{29}{Output of builder.sce\relax }{figure.caption.35}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.4}Identifying Arduino communication port number}{29}{subsection.3.2.4}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.9}{\ignorespaces Output of loader.sce\relax }}{30}{figure.caption.36}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.4}Identifying Arduino communication port number}{29}{subsection.3.2.4}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.9}{\ignorespaces Output of loader.sce\relax }}{30}{figure.caption.36}\protected@file@percent }
 \newlabel{loader}{{3.9}{30}{Output of loader.sce\relax }{figure.caption.36}{}}
 \newlabel{fn:port}{{4}{30}{}{Hfootnote.4}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.10}{\ignorespaces Device Manager in windows\relax }}{31}{figure.caption.37}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.10}{\ignorespaces Device Manager in windows\relax }}{31}{figure.caption.37}\protected@file@percent }
 \newlabel{dev-mgr}{{3.10}{31}{Device Manager in windows\relax }{figure.caption.37}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.5}Testing Scilab-Arduino toolbox}{31}{subsection.3.2.5}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.5}Testing Scilab-Arduino toolbox}{31}{subsection.3.2.5}\protected@file@percent }
 \newlabel{sec:testing-scilab-arduino}{{3.2.5}{31}{Testing Scilab-Arduino toolbox}{subsection.3.2.5}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.11}{\ignorespaces COM port properties window\relax }}{32}{figure.caption.38}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.11}{\ignorespaces COM port properties window\relax }}{32}{figure.caption.38}\protected@file@percent }
 \newlabel{com}{{3.11}{32}{COM port properties window\relax }{figure.caption.38}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.12}{\ignorespaces Port number on Linux terminal\relax }}{32}{figure.caption.39}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.12}{\ignorespaces Port number on Linux terminal\relax }}{32}{figure.caption.39}\protected@file@percent }
 \newlabel{linux-port}{{3.12}{32}{Port number on Linux terminal\relax }{figure.caption.39}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test\textunderscore firmware.sce}{33}{lstlisting.3.-2}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.6}Firmware}{33}{subsection.3.2.6}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test\textunderscore firmware.sce}{33}{lstlisting.3.-2}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.2.6}Firmware}{33}{subsection.3.2.6}\protected@file@percent }
 \newlabel{sec:test-firmware-scilab}{{3.2.6}{33}{Firmware}{subsection.3.2.6}{}}
 \@writefile{cod}{\addvspace {10pt}}
 \newlabel{fn:firmware}{{5}{33}{}{Hfootnote.5}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.13}{\ignorespaces Scilab test code output\relax }}{34}{figure.caption.40}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.13}{\ignorespaces Scilab test code output\relax }}{34}{figure.caption.40}\protected@file@percent }
 \newlabel{test-console}{{3.13}{34}{Scilab test code output\relax }{figure.caption.40}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.14}{\ignorespaces Arduino toolbox functions used in this book\relax }}{34}{figure.caption.41}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.14}{\ignorespaces Arduino toolbox functions used in this book\relax }}{34}{figure.caption.41}\protected@file@percent }
 \newlabel{func}{{3.14}{34}{Arduino toolbox functions used in this book\relax }{figure.caption.41}{}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{3.{1}}{}}{34}{codemass.3.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {3.{1}}A Scilab code to check whether the firmware is properly installed or not}{34}{codemass.3.1}}
-\newlabel{5@xvr}{{}{34}{Firmware}{codemass.3.1}{}}
-\newlabel{5@vr}{{}{34}{Firmware}{codemass.3.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{3.{1}}{}}{34}{codemass.3.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {3.{1}}A Scilab code to check whether the firmware is properly installed or not}{34}{codemass.3.1}\protected@file@percent }
+\newlabel{5@xvr}{{}{34}}
+\newlabel{5@vr}{{}{34}}
 \citation{xcos-ref}
 \newlabel{sci:test-firmware}{{3.{1}}{35}{Firmware}{codemass.3.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test\textunderscore firmware.sce}{35}{lstlisting.3.-4}}
-\@writefile{toc}{\contentsline {section}{\numberline {3.3}Xcos}{35}{section.3.3}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test\textunderscore firmware.sce}{35}{lstlisting.3.-4}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {3.3}Xcos}{35}{section.3.3}\protected@file@percent }
 \newlabel{sec:xcos-start}{{3.3}{35}{Xcos}{section.3.3}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.3.1}Downloading, installing and testing}{35}{subsection.3.3.1}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.15}{\ignorespaces Sine generator in palette browser\relax }}{36}{figure.caption.42}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.3.1}Downloading, installing and testing}{35}{subsection.3.3.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.15}{\ignorespaces Sine generator in palette browser\relax }}{36}{figure.caption.42}\protected@file@percent }
 \newlabel{sine-blk}{{3.15}{36}{Sine generator in palette browser\relax }{figure.caption.42}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.3.2}Use case}{36}{subsection.3.3.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.16}{\ignorespaces CSCOPE block in xcos\relax }}{37}{figure.caption.43}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.3.2}Use case}{36}{subsection.3.3.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.16}{\ignorespaces CSCOPE block in xcos\relax }}{37}{figure.caption.43}\protected@file@percent }
 \newlabel{plot-blk}{{3.16}{37}{CSCOPE block in xcos\relax }{figure.caption.43}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.17}{\ignorespaces CLOCK\_c block in xcos\relax }}{37}{figure.caption.44}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.17}{\ignorespaces CLOCK\_c block in xcos\relax }}{37}{figure.caption.44}\protected@file@percent }
 \newlabel{clk-blk}{{3.17}{37}{CLOCK\_c block in xcos\relax }{figure.caption.44}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.18}{\ignorespaces Sine generator in Xcos\relax }}{38}{figure.caption.45}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.18}{\ignorespaces Sine generator in Xcos\relax }}{38}{figure.caption.45}\protected@file@percent }
 \newlabel{sine-gen}{{3.18}{38}{Sine generator in Xcos\relax }{figure.caption.45}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.19}{\ignorespaces Sine generator Xcos output\relax }}{38}{figure.caption.46}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.19}{\ignorespaces Sine generator Xcos output\relax }}{38}{figure.caption.46}\protected@file@percent }
 \newlabel{sine-output}{{3.19}{38}{Sine generator Xcos output\relax }{figure.caption.46}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.20}{\ignorespaces CSCOPE configuration window\relax }}{39}{figure.caption.47}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.20}{\ignorespaces CSCOPE configuration window\relax }}{39}{figure.caption.47}\protected@file@percent }
 \newlabel{cscope-config}{{3.20}{39}{CSCOPE configuration window\relax }{figure.caption.47}{}}
 \citation{python-ref}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.21}{\ignorespaces Simulation setup window\relax }}{40}{figure.caption.48}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.21}{\ignorespaces Simulation setup window\relax }}{40}{figure.caption.48}\protected@file@percent }
 \newlabel{sim-setup}{{3.21}{40}{Simulation setup window\relax }{figure.caption.48}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.22}{\ignorespaces Palette browser showing Arduino blocks\relax }}{40}{figure.caption.49}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.22}{\ignorespaces Palette browser showing Arduino blocks\relax }}{40}{figure.caption.49}\protected@file@percent }
 \newlabel{arduino-palette}{{3.22}{40}{Palette browser showing Arduino blocks\relax }{figure.caption.49}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.3.3}Xcos-Arduino}{40}{subsection.3.3.3}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.23}{\ignorespaces Xcos block help\relax }}{41}{figure.caption.50}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.3.3}Xcos-Arduino}{40}{subsection.3.3.3}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.23}{\ignorespaces Xcos block help\relax }}{41}{figure.caption.50}\protected@file@percent }
 \newlabel{blk-help}{{3.23}{41}{Xcos block help\relax }{figure.caption.50}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {3.4}Python}{41}{section.3.4}}
+\@writefile{toc}{\contentsline {section}{\numberline {3.4}Python}{41}{section.3.4}\protected@file@percent }
 \newlabel{sec:python-start}{{3.4}{41}{Python}{section.3.4}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.1}Downloading and installing on Windows}{41}{subsection.3.4.1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.1}Downloading and installing on Windows}{41}{subsection.3.4.1}\protected@file@percent }
 \newlabel{py-windows}{{3.4.1}{41}{Downloading and installing on Windows}{subsection.3.4.1}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.24}{\ignorespaces Installing Python 3 on Windows\relax }}{42}{figure.caption.51}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.24}{\ignorespaces Installing Python 3 on Windows\relax }}{42}{figure.caption.51}\protected@file@percent }
 \newlabel{python-windows}{{3.24}{42}{Installing Python 3 on Windows\relax }{figure.caption.51}{}}
 \citation{pySerial}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.25}{\ignorespaces Launching the Command Prompt on Windows\relax }}{43}{figure.caption.52}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.25}{\ignorespaces Launching the Command Prompt on Windows\relax }}{43}{figure.caption.52}\protected@file@percent }
 \newlabel{windows-run}{{3.25}{43}{Launching the Command Prompt on Windows\relax }{figure.caption.52}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.26}{\ignorespaces Command Prompt on Windows\relax }}{43}{figure.caption.53}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.26}{\ignorespaces Command Prompt on Windows\relax }}{43}{figure.caption.53}\protected@file@percent }
 \newlabel{windows-cmd}{{3.26}{43}{Command Prompt on Windows\relax }{figure.caption.53}{}}
 \citation{pySerial}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.2}Downloading and installing on GNU/Linux Ubuntu}{44}{subsection.3.4.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.2}Downloading and installing on GNU/Linux Ubuntu}{44}{subsection.3.4.2}\protected@file@percent }
 \newlabel{py-linux}{{3.4.2}{44}{Downloading and installing on GNU/Linux Ubuntu}{subsection.3.4.2}{}}
 \citation{pySerial}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.3}Python-Arduino toolbox}{45}{subsection.3.4.3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.3}Python-Arduino toolbox}{45}{subsection.3.4.3}\protected@file@percent }
 \newlabel{sec:python-toolbox}{{3.4.3}{45}{Python-Arduino toolbox}{subsection.3.4.3}{}}
-\newlabel{6@xvr}{{}{45}{Python-Arduino toolbox}{subsection.3.4.3}{}}
-\newlabel{6@vr}{{}{45}{Python-Arduino toolbox}{subsection.3.4.3}{}}
+\newlabel{6@xvr}{{}{45}}
+\newlabel{6@vr}{{}{45}}
 \citation{julia-ref}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.4}Firmware}{46}{subsection.3.4.4}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.4.4}Firmware}{46}{subsection.3.4.4}\protected@file@percent }
 \newlabel{sec:test-firmware-python}{{3.4.4}{46}{Firmware}{subsection.3.4.4}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{3.{1}}{}}{46}{pymass.3.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {3.{1}}A Python script to check whether the firmware is properly installed or not}{46}{pymass.3.1}}
-\newlabel{7@xvr}{{}{46}{Firmware}{pymass.3.1}{}}
-\newlabel{7@vr}{{}{46}{Firmware}{pymass.3.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{3.{1}}{}}{46}{pymass.3.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {3.{1}}A Python script to check whether the firmware is properly installed or not}{46}{pymass.3.1}\protected@file@percent }
+\newlabel{7@xvr}{{}{46}}
+\newlabel{7@vr}{{}{46}}
 \newlabel{py:test-firmware}{{3.{1}}{46}{Firmware}{pymass.3.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/python/test\textunderscore firmware.py}{46}{lstlisting.3.-5}}
-\@writefile{toc}{\contentsline {section}{\numberline {3.5}Julia}{47}{section.3.5}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/tools/python/test\textunderscore firmware.py}{46}{lstlisting.3.-5}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {3.5}Julia}{47}{section.3.5}\protected@file@percent }
 \newlabel{sec:julia-start}{{3.5}{47}{Julia}{section.3.5}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.1}Downloading and installing on Windows}{47}{subsection.3.5.1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.1}Downloading and installing on Windows}{47}{subsection.3.5.1}\protected@file@percent }
 \newlabel{julia-install-windows}{{3.5.1}{47}{Downloading and installing on Windows}{subsection.3.5.1}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.27}{\ignorespaces Julia's website to download 64-bit Windows/Linux binaries\relax }}{48}{figure.caption.54}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.27}{\ignorespaces Julia's website to download 64-bit Windows/Linux binaries\relax }}{48}{figure.caption.54}\protected@file@percent }
 \newlabel{julia-download}{{3.27}{48}{Julia's website to download 64-bit Windows/Linux binaries\relax }{figure.caption.54}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.28}{\ignorespaces Installing Julia 1.6.0 on Windows\relax }}{48}{figure.caption.55}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.28}{\ignorespaces Installing Julia 1.6.0 on Windows\relax }}{48}{figure.caption.55}\protected@file@percent }
 \newlabel{julia-windows-install}{{3.28}{48}{Installing Julia 1.6.0 on Windows\relax }{figure.caption.55}{}}
 \citation{julia-serial-ports}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.29}{\ignorespaces Launching the Command Prompt on Windows\relax }}{49}{figure.caption.56}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.29}{\ignorespaces Launching the Command Prompt on Windows\relax }}{49}{figure.caption.56}\protected@file@percent }
 \newlabel{windows-run-julia}{{3.29}{49}{Launching the Command Prompt on Windows\relax }{figure.caption.56}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.30}{\ignorespaces Command Prompt on Windows\relax }}{49}{figure.caption.57}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.30}{\ignorespaces Command Prompt on Windows\relax }}{49}{figure.caption.57}\protected@file@percent }
 \newlabel{windows-cmd-julia}{{3.30}{49}{Command Prompt on Windows\relax }{figure.caption.57}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.31}{\ignorespaces Windows command prompt to launch Julia REPL\relax }}{50}{figure.caption.58}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.31}{\ignorespaces Windows command prompt to launch Julia REPL\relax }}{50}{figure.caption.58}\protected@file@percent }
 \newlabel{julia-repl-windows}{{3.31}{50}{Windows command prompt to launch Julia REPL\relax }{figure.caption.58}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.32}{\ignorespaces Windows command prompt to enter Pkg REPL in Julia\relax }}{51}{figure.caption.59}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.32}{\ignorespaces Windows command prompt to enter Pkg REPL in Julia\relax }}{51}{figure.caption.59}\protected@file@percent }
 \newlabel{julia-pkg-windows}{{3.32}{51}{Windows command prompt to enter Pkg REPL in Julia\relax }{figure.caption.59}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.2}Downloading and installing GNU/Linux Ubuntu}{51}{subsection.3.5.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.2}Downloading and installing GNU/Linux Ubuntu}{51}{subsection.3.5.2}\protected@file@percent }
 \newlabel{julia-install-linux}{{3.5.2}{51}{Downloading and installing GNU/Linux Ubuntu}{subsection.3.5.2}{}}
 \citation{julia-serial-ports}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.33}{\ignorespaces Linux terminal to launch Julia REPL\relax }}{53}{figure.caption.60}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.33}{\ignorespaces Linux terminal to launch Julia REPL\relax }}{53}{figure.caption.60}\protected@file@percent }
 \newlabel{julia-repl}{{3.33}{53}{Linux terminal to launch Julia REPL\relax }{figure.caption.60}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.34}{\ignorespaces Linux terminal to enter Pkg REPL in Julia\relax }}{54}{figure.caption.61}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.34}{\ignorespaces Linux terminal to enter Pkg REPL in Julia\relax }}{54}{figure.caption.61}\protected@file@percent }
 \newlabel{julia-pkg}{{3.34}{54}{Linux terminal to enter Pkg REPL in Julia\relax }{figure.caption.61}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.3}Julia-Arduino toolbox}{55}{subsection.3.5.3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.3}Julia-Arduino toolbox}{55}{subsection.3.5.3}\protected@file@percent }
 \newlabel{sec:julia-toolbox}{{3.5.3}{55}{Julia-Arduino toolbox}{subsection.3.5.3}{}}
-\newlabel{8@xvr}{{}{55}{Julia-Arduino toolbox}{subsection.3.5.3}{}}
-\newlabel{8@vr}{{}{55}{Julia-Arduino toolbox}{subsection.3.5.3}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.4}Firmware}{55}{subsection.3.5.4}}
+\newlabel{8@xvr}{{}{55}}
+\newlabel{8@vr}{{}{55}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.5.4}Firmware}{55}{subsection.3.5.4}\protected@file@percent }
 \newlabel{sec:test-firmware-julia}{{3.5.4}{55}{Firmware}{subsection.3.5.4}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{3.{1}}{}}{55}{juliamass.3.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {3.{1}}A Julia source file to check whether the firmware is properly installed or not}{55}{juliamass.3.1}}
-\newlabel{9@xvr}{{}{55}{Firmware}{juliamass.3.1}{}}
-\newlabel{9@vr}{{}{55}{Firmware}{juliamass.3.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{3.{1}}{}}{55}{juliamass.3.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {3.{1}}A Julia source file to check whether the firmware is properly installed or not}{55}{juliamass.3.1}\protected@file@percent }
+\newlabel{9@xvr}{{}{55}}
+\newlabel{9@vr}{{}{55}}
 \newlabel{julia:test-firmware}{{3.{1}}{55}{Firmware}{juliamass.3.1}{}}
 \citation{om-ref}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/julia/test\textunderscore firmware.jl}{56}{lstlisting.3.-6}}
-\@writefile{toc}{\contentsline {section}{\numberline {3.6}OpenModelica}{56}{section.3.6}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/tools/julia/test\textunderscore firmware.jl}{56}{lstlisting.3.-6}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {3.6}OpenModelica}{56}{section.3.6}\protected@file@percent }
 \newlabel{sec:OpenModelica-start}{{3.6}{56}{OpenModelica}{section.3.6}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.1}Downloading and installing on Windows}{56}{subsection.3.6.1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.1}Downloading and installing on Windows}{56}{subsection.3.6.1}\protected@file@percent }
 \newlabel{openmodelica-install-windows}{{3.6.1}{56}{Downloading and installing on Windows}{subsection.3.6.1}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.35}{\ignorespaces Allowing Microsoft Defender to run the executable file\relax }}{57}{figure.caption.62}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.35}{\ignorespaces Allowing Microsoft Defender to run the executable file\relax }}{57}{figure.caption.62}\protected@file@percent }
 \newlabel{om-run-anyway}{{3.35}{57}{Allowing Microsoft Defender to run the executable file\relax }{figure.caption.62}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.36}{\ignorespaces Setup of Modelica Standard Library version\relax }}{58}{figure.caption.63}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.36}{\ignorespaces Setup of Modelica Standard Library version\relax }}{58}{figure.caption.63}\protected@file@percent }
 \newlabel{om-help}{{3.36}{58}{Setup of Modelica Standard Library version\relax }{figure.caption.63}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.2}Downloading and installing on GNU/Linux Ubuntu}{58}{subsection.3.6.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.2}Downloading and installing on GNU/Linux Ubuntu}{58}{subsection.3.6.2}\protected@file@percent }
 \newlabel{openmodelica-install-linux}{{3.6.2}{58}{Downloading and installing on GNU/Linux Ubuntu}{subsection.3.6.2}{}}
 \citation{om-ref}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.3}Simulating models in OpenModelica}{59}{subsection.3.6.3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.3}Simulating models in OpenModelica}{59}{subsection.3.6.3}\protected@file@percent }
 \newlabel{OpenModelica-code-execution}{{3.6.3}{59}{Simulating models in OpenModelica}{subsection.3.6.3}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.37}{\ignorespaces User Interface of OMEdit\relax }}{60}{figure.caption.64}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.37}{\ignorespaces User Interface of OMEdit\relax }}{60}{figure.caption.64}\protected@file@percent }
 \newlabel{om-ui}{{3.37}{60}{User Interface of OMEdit\relax }{figure.caption.64}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.38}{\ignorespaces Opening a model in OMEdit\relax }}{61}{figure.caption.65}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.38}{\ignorespaces Opening a model in OMEdit\relax }}{61}{figure.caption.65}\protected@file@percent }
 \newlabel{om-model-open}{{3.38}{61}{Opening a model in OMEdit\relax }{figure.caption.65}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.4}OpenModelica-Arduino toolbox}{61}{subsection.3.6.4}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.4}OpenModelica-Arduino toolbox}{61}{subsection.3.6.4}\protected@file@percent }
 \newlabel{sec:load-om-toolbox}{{3.6.4}{61}{OpenModelica-Arduino toolbox}{subsection.3.6.4}{}}
-\newlabel{10@xvr}{{}{61}{OpenModelica-Arduino toolbox}{subsection.3.6.4}{}}
-\newlabel{10@vr}{{}{61}{OpenModelica-Arduino toolbox}{subsection.3.6.4}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.39}{\ignorespaces Opening a model in diagram view in OMEdit\relax }}{62}{figure.caption.66}}
+\newlabel{10@xvr}{{}{61}}
+\newlabel{10@vr}{{}{61}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.39}{\ignorespaces Opening a model in diagram view in OMEdit\relax }}{62}{figure.caption.66}\protected@file@percent }
 \newlabel{om-modeling}{{3.39}{62}{Opening a model in diagram view in OMEdit\relax }{figure.caption.66}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.40}{\ignorespaces Different views of a model in OMEdit\relax }}{62}{figure.caption.67}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.40}{\ignorespaces Different views of a model in OMEdit\relax }}{62}{figure.caption.67}\protected@file@percent }
 \newlabel{om-views}{{3.40}{62}{Different views of a model in OMEdit\relax }{figure.caption.67}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.41}{\ignorespaces Opening a model in text view in OMEdit\relax }}{63}{figure.caption.68}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.41}{\ignorespaces Opening a model in text view in OMEdit\relax }}{63}{figure.caption.68}\protected@file@percent }
 \newlabel{om-text-view}{{3.41}{63}{Opening a model in text view in OMEdit\relax }{figure.caption.68}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.42}{\ignorespaces Simulating a model in OMEdit\relax }}{63}{figure.caption.69}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.42}{\ignorespaces Simulating a model in OMEdit\relax }}{63}{figure.caption.69}\protected@file@percent }
 \newlabel{om-simulate}{{3.42}{63}{Simulating a model in OMEdit\relax }{figure.caption.69}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.43}{\ignorespaces Output window of OMEdit\relax }}{64}{figure.caption.70}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3.43}{\ignorespaces Output window of OMEdit\relax }}{64}{figure.caption.70}\protected@file@percent }
 \newlabel{om-sim-success}{{3.43}{64}{Output window of OMEdit\relax }{figure.caption.70}{}}
 \newlabel{itm:library}{{4}{64}{OpenModelica-Arduino toolbox}{Item.158}{}}
 \newlabel{itm:locate}{{5}{65}{OpenModelica-Arduino toolbox}{Item.159}{}}
 \newlabel{itm:simulate}{{6}{65}{OpenModelica-Arduino toolbox}{Item.160}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.5}Firmware}{65}{subsection.3.6.5}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {3.6.5}Firmware}{65}{subsection.3.6.5}\protected@file@percent }
 \newlabel{om-firmware}{{3.6.5}{65}{Firmware}{subsection.3.6.5}{}}
 \newlabel{sec:test-firmware-OpenModelica}{{3.6.5}{65}{Firmware}{subsection.3.6.5}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{3.{1}}{}}{65}{OpenModelicamass.3.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {3.{1}}An OpenModelica code/model to check whether the firmware is properly installed or not}{65}{OpenModelicamass.3.1}}
-\newlabel{11@xvr}{{}{65}{Firmware}{OpenModelicamass.3.1}{}}
-\newlabel{11@vr}{{}{65}{Firmware}{OpenModelicamass.3.1}{}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{3.{1}}{}}{65}{OpenModelicamass.3.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {3.{1}}An OpenModelica code/model to check whether the firmware is properly installed or not}{65}{OpenModelicamass.3.1}\protected@file@percent }
+\newlabel{11@xvr}{{}{65}}
+\newlabel{11@vr}{{}{65}}
 \newlabel{OpenModelica:test-firmware}{{3.{1}}{65}{Firmware}{OpenModelicamass.3.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/openmodelica/windows//test\textunderscore firmware.mo}{65}{lstlisting.3.-7}}
-\@writefile{lof}{\contentsline {figure}{\numberline {3.44}{\ignorespaces Examples provided in the OpenModelica-Arduino toolbox\relax }}{66}{figure.caption.71}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/tools/openmodelica/windows//test\textunderscore firmware.mo}{65}{lstlisting.3.-7}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3.44}{\ignorespaces Examples provided in the OpenModelica-Arduino toolbox\relax }}{66}{figure.caption.71}\protected@file@percent }
 \newlabel{om-examples-toolbox}{{3.44}{66}{Examples provided in the OpenModelica-Arduino toolbox\relax }{figure.caption.71}{}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {4}Interfacing a Light Emitting Diode}{67}{chapter.4}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {4}Interfacing a Light Emitting Diode}{67}{chapter.4}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{led}{{4}{67}{Interfacing a Light Emitting Diode}{chapter.4}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.1}Preliminaries}{67}{section.4.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {4.1}Preliminaries}{67}{section.4.1}\protected@file@percent }
 \newlabel{sec:led-pril}{{4.1}{67}{Preliminaries}{section.4.1}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.1}{\ignorespaces Light Emitting Diode\relax }}{67}{figure.caption.72}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.1}{\ignorespaces Light Emitting Diode\relax }}{67}{figure.caption.72}\protected@file@percent }
 \newlabel{fig:ledsym}{{4.1}{67}{Light Emitting Diode\relax }{figure.caption.72}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.2}{\ignorespaces Internal connection diagram for the RGB LED on the shield\relax }}{68}{figure.caption.73}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.2}{\ignorespaces Internal connection diagram for the RGB LED on the shield\relax }}{68}{figure.caption.73}\protected@file@percent }
 \newlabel{fig:ledblock}{{4.2}{68}{Internal connection diagram for the RGB LED on the shield\relax }{figure.caption.73}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.3}{\ignorespaces Connecting Arduino Uno\ and shield\relax }}{68}{figure.caption.74}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.3}{\ignorespaces Connecting Arduino Uno\ and shield\relax }}{68}{figure.caption.74}\protected@file@percent }
 \newlabel{fig:uno-shield-connect}{{4.3}{68}{Connecting \arduino \ and shield\relax }{figure.caption.74}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.4}{\ignorespaces An RGB LED with Arduino Uno\ using a breadboard\relax }}{69}{figure.caption.75}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.4}{\ignorespaces An RGB LED with Arduino Uno\ using a breadboard\relax }}{69}{figure.caption.75}\protected@file@percent }
 \newlabel{fig:ard-rgb-bread}{{4.4}{69}{An RGB LED with \arduino \ using a breadboard\relax }{figure.caption.75}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.2}Connecting an RGB LED with Arduino Uno\ using a breadboard}{69}{section.4.2}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.3}Lighting the LED from the Arduino IDE}{70}{section.4.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.3.1}Lighting the LED}{70}{subsection.4.3.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {4.2}Connecting an RGB LED with Arduino Uno\ using a breadboard}{69}{section.4.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {4.3}Lighting the LED from the Arduino IDE}{70}{section.4.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.3.1}Lighting the LED}{70}{subsection.4.3.1}\protected@file@percent }
 \newlabel{sec:light-ard}{{4.3.1}{70}{Lighting the LED}{subsection.4.3.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{70}{lstlisting.4.-8}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{70}{lstlisting.4.-9}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{70}{lstlisting.4.-10}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{70}{lstlisting.4.-11}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{71}{section*.76}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{71}{section*.78}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{1}}{}}{71}{egmass.4.1}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.5}{\ignorespaces LED experiments directly on Arduino Uno\ board, without the shield\relax }}{72}{figure.caption.77}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{70}{lstlisting.4.-8}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{70}{lstlisting.4.-9}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{70}{lstlisting.4.-10}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{70}{lstlisting.4.-11}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{71}{section*.76}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{71}{section*.78}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{1}}{}}{71}{egmass.4.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {4.5}{\ignorespaces LED experiments directly on Arduino Uno\ board, without the shield\relax }}{72}{figure.caption.77}\protected@file@percent }
 \newlabel{fig:led-uno}{{4.5}{72}{LED experiments directly on \arduino \ board, without the shield\relax }{figure.caption.77}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.3.2}Arduino Code}{72}{subsection.4.3.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.3.2}Arduino Code}{72}{subsection.4.3.2}\protected@file@percent }
 \newlabel{sec:led-arduino-code}{{4.3.2}{72}{Arduino Code}{subsection.4.3.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{1}}{}}{72}{ardmass.4.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{72}{ardmass.4.1}}
-\newlabel{12@xvr}{{}{72}{Arduino Code}{ardmass.4.1}{}}
-\newlabel{12@vr}{{}{72}{Arduino Code}{ardmass.4.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{1}}{}}{72}{ardmass.4.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{72}{ardmass.4.1}\protected@file@percent }
+\newlabel{12@xvr}{{}{72}}
+\newlabel{12@vr}{{}{72}}
 \newlabel{ard:led-blue}{{4.{1}}{72}{Arduino Code}{ardmass.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{72}{lstlisting.4.-13}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{72}{ardmass.4.2}}
-\@writefile{ard}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{72}{ardmass.4.2}}
-\newlabel{13@xvr}{{}{72}{Arduino Code}{ardmass.4.2}{}}
-\newlabel{13@vr}{{}{72}{Arduino Code}{ardmass.4.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{72}{lstlisting.4.-13}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{72}{ardmass.4.2}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{72}{ardmass.4.2}\protected@file@percent }
+\newlabel{13@xvr}{{}{72}}
+\newlabel{13@vr}{{}{72}}
 \newlabel{ard:led-blue-delay}{{4.{2}}{72}{Arduino Code}{ardmass.4.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{72}{lstlisting.4.-14}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{3}}{}}{73}{ardmass.4.3}}
-\@writefile{ard}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{73}{ardmass.4.3}}
-\newlabel{14@xvr}{{}{73}{Arduino Code}{ardmass.4.3}{}}
-\newlabel{14@vr}{{}{73}{Arduino Code}{ardmass.4.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{72}{lstlisting.4.-14}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{3}}{}}{73}{ardmass.4.3}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{73}{ardmass.4.3}\protected@file@percent }
+\newlabel{14@xvr}{{}{73}}
+\newlabel{14@vr}{{}{73}}
 \newlabel{ard:led-blue-red}{{4.{3}}{73}{Arduino Code}{ardmass.4.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash blue\textendash red/led\textendash blue\textendash red.ino}{73}{lstlisting.4.-15}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{4}}{}}{73}{ardmass.4.4}}
-\@writefile{ard}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{73}{ardmass.4.4}}
-\newlabel{15@xvr}{{}{73}{Arduino Code}{ardmass.4.4}{}}
-\newlabel{15@vr}{{}{73}{Arduino Code}{ardmass.4.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue\textendash red/led\textendash blue\textendash red.ino}{73}{lstlisting.4.-15}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{4}}{}}{73}{ardmass.4.4}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{73}{ardmass.4.4}\protected@file@percent }
+\newlabel{15@xvr}{{}{73}}
+\newlabel{15@vr}{{}{73}}
 \newlabel{ard:led-blink}{{4.{4}}{73}{Arduino Code}{ardmass.4.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led\textendash green\textendash blink/led\textendash green\textendash blink.ino}{73}{lstlisting.4.-16}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{74}{section.4.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{74}{subsection.4.4.1}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash green\textendash blink/led\textendash green\textendash blink.ino}{73}{lstlisting.4.-16}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{74}{section.4.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{74}{subsection.4.4.1}\protected@file@percent }
 \newlabel{sec:light-sci}{{4.4.1}{74}{Lighting the LED}{subsection.4.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue.sce}{74}{lstlisting.4.-18}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue.sce}{74}{lstlisting.4.-20}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue.sce}{75}{lstlisting.4.-22}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue\textendash delay.sce}{75}{lstlisting.4.-23}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue\textendash delay.sce}{75}{lstlisting.4.-24}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{2}}{}}{75}{egmass.4.2}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.4.2}Scilab Code}{75}{subsection.4.4.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{74}{lstlisting.4.-18}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{74}{lstlisting.4.-20}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{75}{lstlisting.4.-22}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{75}{lstlisting.4.-23}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{75}{lstlisting.4.-24}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{2}}{}}{75}{egmass.4.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.4.2}Scilab Code}{75}{subsection.4.4.2}\protected@file@percent }
 \newlabel{sec:led-scilab-code}{{4.4.2}{75}{Scilab Code}{subsection.4.4.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{1}}{}}{75}{codemass.4.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{75}{codemass.4.1}}
-\newlabel{16@xvr}{{}{75}{Scilab Code}{codemass.4.1}{}}
-\newlabel{16@vr}{{}{75}{Scilab Code}{codemass.4.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{1}}{}}{75}{codemass.4.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{75}{codemass.4.1}\protected@file@percent }
+\newlabel{16@xvr}{{}{75}}
+\newlabel{16@vr}{{}{75}}
 \newlabel{sci:led-blue}{{4.{1}}{75}{Scilab Code}{codemass.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue.sce}{75}{lstlisting.4.-25}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{76}{codemass.4.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{76}{codemass.4.2}}
-\newlabel{17@xvr}{{}{76}{Scilab Code}{codemass.4.2}{}}
-\newlabel{17@vr}{{}{76}{Scilab Code}{codemass.4.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{75}{lstlisting.4.-25}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{76}{codemass.4.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{76}{codemass.4.2}\protected@file@percent }
+\newlabel{17@xvr}{{}{76}}
+\newlabel{17@vr}{{}{76}}
 \newlabel{sci:led-blue-delay}{{4.{2}}{76}{Scilab Code}{codemass.4.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue\textendash delay.sce}{76}{lstlisting.4.-26}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{3}}{}}{76}{codemass.4.3}}
-\@writefile{cod}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{76}{codemass.4.3}}
-\newlabel{18@xvr}{{}{76}{Scilab Code}{codemass.4.3}{}}
-\newlabel{18@vr}{{}{76}{Scilab Code}{codemass.4.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{76}{lstlisting.4.-26}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{3}}{}}{76}{codemass.4.3}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{76}{codemass.4.3}\protected@file@percent }
+\newlabel{18@xvr}{{}{76}}
+\newlabel{18@vr}{{}{76}}
 \newlabel{sci:led-blue-red}{{4.{3}}{76}{Scilab Code}{codemass.4.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash blue\textendash red.sce}{76}{lstlisting.4.-27}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{4}}{}}{76}{codemass.4.4}}
-\@writefile{cod}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{76}{codemass.4.4}}
-\newlabel{19@xvr}{{}{76}{Scilab Code}{codemass.4.4}{}}
-\newlabel{19@vr}{{}{76}{Scilab Code}{codemass.4.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash red.sce}{76}{lstlisting.4.-27}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{4}}{}}{76}{codemass.4.4}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{76}{codemass.4.4}\protected@file@percent }
+\newlabel{19@xvr}{{}{76}}
+\newlabel{19@vr}{{}{76}}
 \newlabel{sci:led-green-blink}{{4.{4}}{76}{Scilab Code}{codemass.4.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led\textendash green\textendash blink.sce}{76}{lstlisting.4.-28}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.5}Lighting the LED from Scilab Xcos}{76}{section.4.5}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash green\textendash blink.sce}{76}{lstlisting.4.-28}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {4.5}Lighting the LED from Scilab Xcos}{76}{section.4.5}\protected@file@percent }
 \newlabel{sec:light-xcos}{{4.5}{76}{Lighting the LED from Scilab Xcos}{section.4.5}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.6}{\ignorespaces Turning the blue LED on through Xcos}}{77}{figure.caption.79}}
-\newlabel{21@xvr}{{}{77}{Turning the blue LED on through Xcos}{figure.caption.79}{}}
-\newlabel{21@vr}{{}{77}{Turning the blue LED on through Xcos}{figure.caption.79}{}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.6}{\ignorespaces Turning the blue LED on through Xcos}}{77}{figure.caption.79}\protected@file@percent }
+\newlabel{21@xvr}{{}{77}}
+\newlabel{21@vr}{{}{77}}
 \newlabel{fig:led-blue}{{4.6}{77}{Turning the blue LED on through Xcos}{figure.caption.79}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {4.1}{\ignorespaces Parameters to light the blue LED in Xcos\relax }}{77}{table.caption.80}}
+\@writefile{lot}{\contentsline {table}{\numberline {4.1}{\ignorespaces Parameters to light the blue LED in Xcos\relax }}{77}{table.caption.80}\protected@file@percent }
 \newlabel{tab:led-blue}{{4.1}{77}{Parameters to light the blue LED in Xcos\relax }{table.caption.80}{}}
-\newlabel{22@xvr}{{}{77}{Parameters to light the blue LED in Xcos\relax }{table.caption.80}{}}
-\newlabel{22@vr}{{}{77}{Parameters to light the blue LED in Xcos\relax }{table.caption.80}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.7}{\ignorespaces Turning the blue LED on through Xcos for two seconds}}{78}{figure.caption.81}}
-\newlabel{24@xvr}{{}{78}{Turning the blue LED on through Xcos for two seconds}{figure.caption.81}{}}
-\newlabel{24@vr}{{}{78}{Turning the blue LED on through Xcos for two seconds}{figure.caption.81}{}}
+\newlabel{22@xvr}{{}{77}}
+\newlabel{22@vr}{{}{77}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.7}{\ignorespaces Turning the blue LED on through Xcos for two seconds}}{78}{figure.caption.81}\protected@file@percent }
+\newlabel{24@xvr}{{}{78}}
+\newlabel{24@vr}{{}{78}}
 \newlabel{fig:led-blue-delay}{{4.7}{78}{Turning the blue LED on through Xcos for two seconds}{figure.caption.81}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {4.2}{\ignorespaces Parameters to light the blue LED in Xcos for two seconds\relax }}{78}{table.caption.82}}
+\@writefile{lot}{\contentsline {table}{\numberline {4.2}{\ignorespaces Parameters to light the blue LED in Xcos for two seconds\relax }}{78}{table.caption.82}\protected@file@percent }
 \newlabel{tab:led-blue-delay}{{4.2}{78}{Parameters to light the blue LED in Xcos for two seconds\relax }{table.caption.82}{}}
-\newlabel{25@xvr}{{}{78}{Parameters to light the blue LED in Xcos for two seconds\relax }{table.caption.82}{}}
-\newlabel{25@vr}{{}{78}{Parameters to light the blue LED in Xcos for two seconds\relax }{table.caption.82}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.8}{\ignorespaces Turning the blue and red LEDs on through Xcos and turning them off one by one}}{79}{figure.caption.83}}
-\newlabel{27@xvr}{{}{79}{Turning the blue and red LEDs on through Xcos and turning them off one by one}{figure.caption.83}{}}
-\newlabel{27@vr}{{}{79}{Turning the blue and red LEDs on through Xcos and turning them off one by one}{figure.caption.83}{}}
+\newlabel{25@xvr}{{}{78}}
+\newlabel{25@vr}{{}{78}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.8}{\ignorespaces Turning the blue and red LEDs on through Xcos and turning them off one by one}}{79}{figure.caption.83}\protected@file@percent }
+\newlabel{27@xvr}{{}{79}}
+\newlabel{27@vr}{{}{79}}
 \newlabel{fig:led-blue-red}{{4.8}{79}{Turning the blue and red LEDs on through Xcos and turning them off one by one}{figure.caption.83}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {4.3}{\ignorespaces Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }}{79}{table.caption.84}}
+\@writefile{lot}{\contentsline {table}{\numberline {4.3}{\ignorespaces Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }}{79}{table.caption.84}\protected@file@percent }
 \newlabel{tab:led-blue-red}{{4.3}{79}{Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }{table.caption.84}{}}
-\newlabel{28@xvr}{{}{79}{Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }{table.caption.84}{}}
-\newlabel{28@vr}{{}{79}{Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }{table.caption.84}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {4.9}{\ignorespaces Blinking the green LED every second through Xcos}}{80}{figure.caption.85}}
-\newlabel{30@xvr}{{}{80}{Blinking the green LED every second through Xcos}{figure.caption.85}{}}
-\newlabel{30@vr}{{}{80}{Blinking the green LED every second through Xcos}{figure.caption.85}{}}
+\newlabel{28@xvr}{{}{79}}
+\newlabel{28@vr}{{}{79}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4.9}{\ignorespaces Blinking the green LED every second through Xcos}}{80}{figure.caption.85}\protected@file@percent }
+\newlabel{30@xvr}{{}{80}}
+\newlabel{30@vr}{{}{80}}
 \newlabel{fig:led-green-blink}{{4.9}{80}{Blinking the green LED every second through Xcos}{figure.caption.85}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {4.4}{\ignorespaces Parameters to make the green LED blink every second\relax }}{80}{table.caption.86}}
+\@writefile{lot}{\contentsline {table}{\numberline {4.4}{\ignorespaces Parameters to make the green LED blink every second\relax }}{80}{table.caption.86}\protected@file@percent }
 \newlabel{tab:led-green-blink}{{4.4}{80}{Parameters to make the green LED blink every second\relax }{table.caption.86}{}}
-\newlabel{31@xvr}{{}{80}{Parameters to make the green LED blink every second\relax }{table.caption.86}{}}
-\newlabel{31@vr}{{}{80}{Parameters to make the green LED blink every second\relax }{table.caption.86}{}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{3}}{}}{80}{egmass.4.3}}
+\newlabel{31@xvr}{{}{80}}
+\newlabel{31@vr}{{}{80}}
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{3}}{}}{80}{egmass.4.3}\protected@file@percent }
 \citation{pySerial}
-\@writefile{toc}{\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{81}{section.4.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{81}{subsection.4.6.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{81}{section.4.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{81}{subsection.4.6.1}\protected@file@percent }
 \newlabel{sec:light-py}{{4.6.1}{81}{Lighting the LED}{subsection.4.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-29}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-30}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-31}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-32}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{82}{lstlisting.4.-33}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{82}{lstlisting.4.-34}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue\textendash delay.py}{82}{lstlisting.4.-35}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue\textendash delay.py}{82}{lstlisting.4.-36}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{4}}{}}{82}{egmass.4.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.2}Python Code}{83}{subsection.4.6.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-29}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-30}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-31}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{81}{lstlisting.4.-32}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{82}{lstlisting.4.-33}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{82}{lstlisting.4.-34}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue\textendash delay.py}{82}{lstlisting.4.-35}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue\textendash delay.py}{82}{lstlisting.4.-36}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{4}}{}}{82}{egmass.4.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.2}Python Code}{83}{subsection.4.6.2}\protected@file@percent }
 \newlabel{sec:led-python-code}{{4.6.2}{83}{Python Code}{subsection.4.6.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{1}}{}}{83}{pymass.4.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{83}{pymass.4.1}}
-\newlabel{32@xvr}{{}{83}{Python Code}{pymass.4.1}{}}
-\newlabel{32@vr}{{}{83}{Python Code}{pymass.4.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{1}}{}}{83}{pymass.4.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{83}{pymass.4.1}\protected@file@percent }
+\newlabel{32@xvr}{{}{83}}
+\newlabel{32@vr}{{}{83}}
 \newlabel{py:led-blue}{{4.{1}}{83}{Python Code}{pymass.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue.py}{83}{lstlisting.4.-37}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{2}}{}}{83}{pymass.4.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{83}{pymass.4.2}}
-\newlabel{33@xvr}{{}{83}{Python Code}{pymass.4.2}{}}
-\newlabel{33@vr}{{}{83}{Python Code}{pymass.4.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{83}{lstlisting.4.-37}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{2}}{}}{83}{pymass.4.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{83}{pymass.4.2}\protected@file@percent }
+\newlabel{33@xvr}{{}{83}}
+\newlabel{33@vr}{{}{83}}
 \newlabel{py:led-blue-delay}{{4.{2}}{83}{Python Code}{pymass.4.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue\textendash delay.py}{83}{lstlisting.4.-38}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{3}}{}}{84}{pymass.4.3}}
-\@writefile{pyd}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{84}{pymass.4.3}}
-\newlabel{34@xvr}{{}{84}{Python Code}{pymass.4.3}{}}
-\newlabel{34@vr}{{}{84}{Python Code}{pymass.4.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue\textendash delay.py}{83}{lstlisting.4.-38}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{3}}{}}{84}{pymass.4.3}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{84}{pymass.4.3}\protected@file@percent }
+\newlabel{34@xvr}{{}{84}}
+\newlabel{34@vr}{{}{84}}
 \newlabel{py:led-blue-red}{{4.{3}}{84}{Python Code}{pymass.4.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash blue\textendash red.py}{84}{lstlisting.4.-39}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{4}}{}}{85}{pymass.4.4}}
-\@writefile{pyd}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{85}{pymass.4.4}}
-\newlabel{35@xvr}{{}{85}{Python Code}{pymass.4.4}{}}
-\newlabel{35@vr}{{}{85}{Python Code}{pymass.4.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue\textendash red.py}{84}{lstlisting.4.-39}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{4}}{}}{85}{pymass.4.4}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{85}{pymass.4.4}\protected@file@percent }
+\newlabel{35@xvr}{{}{85}}
+\newlabel{35@vr}{{}{85}}
 \newlabel{py:led-green-blink}{{4.{4}}{85}{Python Code}{pymass.4.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led\textendash green\textendash blink.py}{85}{lstlisting.4.-40}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash green\textendash blink.py}{85}{lstlisting.4.-40}\protected@file@percent }
 \citation{julia-serial-ports}
-\@writefile{toc}{\contentsline {section}{\numberline {4.7}Lighting the LED from Julia}{86}{section.4.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.7.1}Lighting the LED}{86}{subsection.4.7.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {4.7}Lighting the LED from Julia}{86}{section.4.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.7.1}Lighting the LED}{86}{subsection.4.7.1}\protected@file@percent }
 \newlabel{sec:light-julia}{{4.7.1}{86}{Lighting the LED}{subsection.4.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue.jl}{86}{lstlisting.4.-41}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue.jl}{86}{lstlisting.4.-42}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue.jl}{87}{lstlisting.4.-43}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue.jl}{87}{lstlisting.4.-44}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue\textendash delay.jl}{87}{lstlisting.4.-45}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue\textendash delay.jl}{87}{lstlisting.4.-46}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.7.2}Julia Code}{87}{subsection.4.7.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{86}{lstlisting.4.-41}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{86}{lstlisting.4.-42}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{87}{lstlisting.4.-43}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{87}{lstlisting.4.-44}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue\textendash delay.jl}{87}{lstlisting.4.-45}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue\textendash delay.jl}{87}{lstlisting.4.-46}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.7.2}Julia Code}{87}{subsection.4.7.2}\protected@file@percent }
 \newlabel{sec:led-julia-code}{{4.7.2}{87}{Julia Code}{subsection.4.7.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{87}{juliamass.4.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{87}{juliamass.4.1}}
-\newlabel{36@xvr}{{}{87}{Julia Code}{juliamass.4.1}{}}
-\newlabel{36@vr}{{}{87}{Julia Code}{juliamass.4.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{87}{juliamass.4.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{87}{juliamass.4.1}\protected@file@percent }
+\newlabel{36@xvr}{{}{87}}
+\newlabel{36@vr}{{}{87}}
 \newlabel{julia:led-blue}{{4.{1}}{87}{Julia Code}{juliamass.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue.jl}{87}{lstlisting.4.-47}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{2}}{}}{88}{juliamass.4.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{88}{juliamass.4.2}}
-\newlabel{37@xvr}{{}{88}{Julia Code}{juliamass.4.2}{}}
-\newlabel{37@vr}{{}{88}{Julia Code}{juliamass.4.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{87}{lstlisting.4.-47}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{2}}{}}{88}{juliamass.4.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{88}{juliamass.4.2}\protected@file@percent }
+\newlabel{37@xvr}{{}{88}}
+\newlabel{37@vr}{{}{88}}
 \newlabel{julia:led-blue-delay}{{4.{2}}{88}{Julia Code}{juliamass.4.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue\textendash delay.jl}{88}{lstlisting.4.-48}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{3}}{}}{88}{juliamass.4.3}}
-\@writefile{juliad}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{88}{juliamass.4.3}}
-\newlabel{38@xvr}{{}{88}{Julia Code}{juliamass.4.3}{}}
-\newlabel{38@vr}{{}{88}{Julia Code}{juliamass.4.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue\textendash delay.jl}{88}{lstlisting.4.-48}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{3}}{}}{88}{juliamass.4.3}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{88}{juliamass.4.3}\protected@file@percent }
+\newlabel{38@xvr}{{}{88}}
+\newlabel{38@vr}{{}{88}}
 \newlabel{julia:led-blue-red}{{4.{3}}{88}{Julia Code}{juliamass.4.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash blue\textendash red.jl}{88}{lstlisting.4.-49}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{4}}{}}{88}{juliamass.4.4}}
-\@writefile{juliad}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{88}{juliamass.4.4}}
-\newlabel{39@xvr}{{}{88}{Julia Code}{juliamass.4.4}{}}
-\newlabel{39@vr}{{}{88}{Julia Code}{juliamass.4.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue\textendash red.jl}{88}{lstlisting.4.-49}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{4}}{}}{88}{juliamass.4.4}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{88}{juliamass.4.4}\protected@file@percent }
+\newlabel{39@xvr}{{}{88}}
+\newlabel{39@vr}{{}{88}}
 \newlabel{julia:led-green-blink}{{4.{4}}{88}{Julia Code}{juliamass.4.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led\textendash green\textendash blink.jl}{88}{lstlisting.4.-50}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.8}Lighting the LED from OpenModelica}{89}{section.4.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.8.1}Lighting the LED}{89}{subsection.4.8.1}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash green\textendash blink.jl}{88}{lstlisting.4.-50}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {4.8}Lighting the LED from OpenModelica}{89}{section.4.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.8.1}Lighting the LED}{89}{subsection.4.8.1}\protected@file@percent }
 \newlabel{sec:light-OpenModelica}{{4.8.1}{89}{Lighting the LED}{subsection.4.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue.mo}{89}{lstlisting.4.-51}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue.mo}{89}{lstlisting.4.-52}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue.mo}{89}{lstlisting.4.-54}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue.mo}{90}{lstlisting.4.-57}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue\textendash delay.mo}{90}{lstlisting.4.-58}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue\textendash delay.mo}{90}{lstlisting.4.-59}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.8.2}OpenModelica Code}{90}{subsection.4.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue.mo}{89}{lstlisting.4.-51}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue.mo}{89}{lstlisting.4.-52}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue.mo}{89}{lstlisting.4.-54}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue.mo}{90}{lstlisting.4.-57}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue\textendash delay.mo}{90}{lstlisting.4.-58}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue\textendash delay.mo}{90}{lstlisting.4.-59}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.8.2}OpenModelica Code}{90}{subsection.4.8.2}\protected@file@percent }
 \newlabel{sec:led-OpenModelica-code}{{4.8.2}{90}{OpenModelica Code}{subsection.4.8.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{1}}{}}{91}{OpenModelicamass.4.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{91}{OpenModelicamass.4.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{1}}{}}{91}{OpenModelicamass.4.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{91}{OpenModelicamass.4.1}\protected@file@percent }
 \newlabel{OpenModelica:led-blue}{{4.{1}}{91}{OpenModelica Code}{OpenModelicamass.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue.mo}{91}{lstlisting.4.-60}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{2}}{}}{91}{OpenModelicamass.4.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{91}{OpenModelicamass.4.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue.mo}{91}{lstlisting.4.-60}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{2}}{}}{91}{OpenModelicamass.4.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{91}{OpenModelicamass.4.2}\protected@file@percent }
 \newlabel{OpenModelica:led-blue-delay}{{4.{2}}{91}{OpenModelica Code}{OpenModelicamass.4.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue\textendash delay.mo}{91}{lstlisting.4.-61}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{3}}{}}{92}{OpenModelicamass.4.3}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{92}{OpenModelicamass.4.3}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue\textendash delay.mo}{91}{lstlisting.4.-61}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{3}}{}}{92}{OpenModelicamass.4.3}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{92}{OpenModelicamass.4.3}\protected@file@percent }
 \newlabel{OpenModelica:led-blue-red}{{4.{3}}{92}{OpenModelica Code}{OpenModelicamass.4.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash blue\textendash red.mo}{92}{lstlisting.4.-62}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{4}}{}}{93}{OpenModelicamass.4.4}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{93}{OpenModelicamass.4.4}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash blue\textendash red.mo}{92}{lstlisting.4.-62}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{4}}{}}{93}{OpenModelicamass.4.4}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{93}{OpenModelicamass.4.4}\protected@file@percent }
 \newlabel{OpenModelica:led-green-blink}{{4.{4}}{93}{OpenModelica Code}{OpenModelicamass.4.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led\textendash green\textendash blink.mo}{93}{lstlisting.4.-63}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {5}Interfacing a Pushbutton}{95}{chapter.5}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led\textendash green\textendash blink.mo}{93}{lstlisting.4.-63}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {5}Interfacing a Pushbutton}{95}{chapter.5}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{pushbutton}{{5}{95}{Interfacing a Pushbutton}{chapter.5}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.1}Preliminaries}{95}{section.5.1}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.2}Connecting a pushbutton with Arduino Uno\ using a breadboard}{95}{section.5.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {5.1}{\ignorespaces Internal connection diagram for the pushbutton on the shield\relax }}{96}{figure.caption.87}}
+\@writefile{toc}{\contentsline {section}{\numberline {5.1}Preliminaries}{95}{section.5.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {5.2}Connecting a pushbutton with Arduino Uno\ using a breadboard}{95}{section.5.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {5.1}{\ignorespaces Internal connection diagram for the pushbutton on the shield\relax }}{96}{figure.caption.87}\protected@file@percent }
 \newlabel{fig:pushbuttonconn}{{5.1}{96}{Internal connection diagram for the pushbutton on the shield\relax }{figure.caption.87}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {5.2}{\ignorespaces A pushbutton to read its status with Arduino Uno using a breadboard\relax }}{96}{figure.caption.88}}
+\@writefile{lof}{\contentsline {figure}{\numberline {5.2}{\ignorespaces A pushbutton to read its status with Arduino Uno using a breadboard\relax }}{96}{figure.caption.88}\protected@file@percent }
 \newlabel{fig:switch-bread}{{5.2}{96}{A pushbutton to read its status with Arduino Uno using a breadboard\relax }{figure.caption.88}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {5.3}{\ignorespaces A pushbutton to control an LED with Arduino Uno using a breadboard\relax }}{97}{figure.caption.89}}
+\@writefile{lof}{\contentsline {figure}{\numberline {5.3}{\ignorespaces A pushbutton to control an LED with Arduino Uno using a breadboard\relax }}{97}{figure.caption.89}\protected@file@percent }
 \newlabel{fig:switch-led}{{5.3}{97}{A pushbutton to control an LED with Arduino Uno using a breadboard\relax }{figure.caption.89}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.3}Reading the pushbutton status from the Arduino IDE}{98}{section.5.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.3.1}Reading the pushbutton status}{98}{subsection.5.3.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push\textendash button\textendash status/push\textendash button\textendash status.ino}{98}{lstlisting.5.-64}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push\textendash button\textendash status/push\textendash button\textendash status.ino}{98}{lstlisting.5.-65}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led\textendash push\textendash button/led\textendash push\textendash button.ino}{99}{lstlisting.5.-66}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.3.2}Arduino Code}{99}{subsection.5.3.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {5.3}Reading the pushbutton status from the Arduino IDE}{98}{section.5.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.3.1}Reading the pushbutton status}{98}{subsection.5.3.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push\textendash button\textendash status/push\textendash button\textendash status.ino}{98}{lstlisting.5.-64}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push\textendash button\textendash status/push\textendash button\textendash status.ino}{98}{lstlisting.5.-65}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led\textendash push\textendash button/led\textendash push\textendash button.ino}{99}{lstlisting.5.-66}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.3.2}Arduino Code}{99}{subsection.5.3.2}\protected@file@percent }
 \newlabel{sec:push-arduino-code}{{5.3.2}{99}{Arduino Code}{subsection.5.3.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{5.{1}}{}}{99}{ardmass.5.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Serial Monitor}{99}{ardmass.5.1}}
-\newlabel{40@xvr}{{}{99}{Arduino Code}{ardmass.5.1}{}}
-\newlabel{40@vr}{{}{99}{Arduino Code}{ardmass.5.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{5.{1}}{}}{99}{ardmass.5.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Serial Monitor}{99}{ardmass.5.1}\protected@file@percent }
+\newlabel{40@xvr}{{}{99}}
+\newlabel{40@vr}{{}{99}}
 \newlabel{ard:push-100}{{5.{1}}{99}{Arduino Code}{ardmass.5.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push\textendash button\textendash status/push\textendash button\textendash status.ino}{99}{lstlisting.5.-67}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{5.{2}}{}}{99}{ardmass.5.2}}
-\@writefile{ard}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{99}{ardmass.5.2}}
-\newlabel{41@xvr}{{}{99}{Arduino Code}{ardmass.5.2}{}}
-\newlabel{41@vr}{{}{99}{Arduino Code}{ardmass.5.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push\textendash button\textendash status/push\textendash button\textendash status.ino}{99}{lstlisting.5.-67}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{5.{2}}{}}{99}{ardmass.5.2}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{99}{ardmass.5.2}\protected@file@percent }
+\newlabel{41@xvr}{{}{99}}
+\newlabel{41@vr}{{}{99}}
 \newlabel{ard:push-200}{{5.{2}}{99}{Arduino Code}{ardmass.5.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led\textendash push\textendash button/led\textendash push\textendash button.ino}{99}{lstlisting.5.-68}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.4}Reading the pushbutton Status from Scilab}{100}{section.5.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.4.1}Reading the pushbutton Status}{100}{subsection.5.4.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push\textendash button\textendash status.sce}{100}{lstlisting.5.-69}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push\textendash button\textendash status.sce}{100}{lstlisting.5.-70}}
-\@writefile{lof}{\contentsline {figure}{\numberline {5.4}{\ignorespaces GUI in Scilab to show the status of the pushbutton\relax }}{101}{figure.caption.90}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led\textendash push\textendash button/led\textendash push\textendash button.ino}{99}{lstlisting.5.-68}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {5.4}Reading the pushbutton Status from Scilab}{100}{section.5.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.4.1}Reading the pushbutton Status}{100}{subsection.5.4.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push\textendash button\textendash status.sce}{100}{lstlisting.5.-69}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push\textendash button\textendash status.sce}{100}{lstlisting.5.-70}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {5.4}{\ignorespaces GUI in Scilab to show the status of the pushbutton\relax }}{101}{figure.caption.90}\protected@file@percent }
 \newlabel{fig:ard-meter}{{5.4}{101}{GUI in Scilab to show the status of the pushbutton\relax }{figure.caption.90}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led\textendash push\textendash button.sce}{101}{lstlisting.5.-71}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.4.2}Scilab Code}{101}{subsection.5.4.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led\textendash push\textendash button.sce}{101}{lstlisting.5.-71}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.4.2}Scilab Code}{101}{subsection.5.4.2}\protected@file@percent }
 \newlabel{sec:push-scilab-code}{{5.4.2}{101}{Scilab Code}{subsection.5.4.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{5.{1}}{}}{101}{codemass.5.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the GUI}{101}{codemass.5.1}}
-\newlabel{42@xvr}{{}{101}{Scilab Code}{codemass.5.1}{}}
-\newlabel{42@vr}{{}{101}{Scilab Code}{codemass.5.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{5.{1}}{}}{101}{codemass.5.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the GUI}{101}{codemass.5.1}\protected@file@percent }
+\newlabel{42@xvr}{{}{101}}
+\newlabel{42@vr}{{}{101}}
 \newlabel{sci:push-100}{{5.{1}}{101}{Scilab Code}{codemass.5.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push\textendash button\textendash status.sce}{101}{lstlisting.5.-72}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{5.{2}}{}}{102}{codemass.5.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{102}{codemass.5.2}}
-\newlabel{43@xvr}{{}{102}{Scilab Code}{codemass.5.2}{}}
-\newlabel{43@vr}{{}{102}{Scilab Code}{codemass.5.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push\textendash button\textendash status.sce}{101}{lstlisting.5.-72}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{5.{2}}{}}{102}{codemass.5.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{102}{codemass.5.2}\protected@file@percent }
+\newlabel{43@xvr}{{}{102}}
+\newlabel{43@vr}{{}{102}}
 \newlabel{sci:push-200}{{5.{2}}{102}{Scilab Code}{codemass.5.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led\textendash push\textendash button.sce}{102}{lstlisting.5.-73}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.5}Accessing the pushbutton from Xcos}{102}{section.5.5}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led\textendash push\textendash button.sce}{102}{lstlisting.5.-73}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {5.5}Accessing the pushbutton from Xcos}{102}{section.5.5}\protected@file@percent }
 \newlabel{sec:push-xcos}{{5.5}{102}{Accessing the pushbutton from Xcos}{section.5.5}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {5.5}{\ignorespaces Printing the push button status on the display block}}{103}{figure.caption.91}}
-\newlabel{45@xvr}{{}{103}{Printing the push button status on the display block}{figure.caption.91}{}}
-\newlabel{45@vr}{{}{103}{Printing the push button status on the display block}{figure.caption.91}{}}
+\@writefile{lof}{\contentsline {figure}{\numberline {5.5}{\ignorespaces Printing the push button status on the display block}}{103}{figure.caption.91}\protected@file@percent }
+\newlabel{45@xvr}{{}{103}}
+\newlabel{45@vr}{{}{103}}
 \newlabel{fig:push-button-status}{{5.5}{103}{Printing the push button status on the display block}{figure.caption.91}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {5.1}{\ignorespaces Parameters to print the push button status on the display block\relax }}{103}{table.caption.92}}
+\@writefile{lot}{\contentsline {table}{\numberline {5.1}{\ignorespaces Parameters to print the push button status on the display block\relax }}{103}{table.caption.92}\protected@file@percent }
 \newlabel{tab:push-button-status}{{5.1}{103}{Parameters to print the push button status on the display block\relax }{table.caption.92}{}}
-\newlabel{46@xvr}{{}{103}{Parameters to print the push button status on the display block\relax }{table.caption.92}{}}
-\newlabel{46@vr}{{}{103}{Parameters to print the push button status on the display block\relax }{table.caption.92}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {5.6}{\ignorespaces Turning the LED on or off, depending on the pushbutton}}{104}{figure.caption.93}}
-\newlabel{48@xvr}{{}{104}{Turning the LED on or off, depending on the pushbutton}{figure.caption.93}{}}
-\newlabel{48@vr}{{}{104}{Turning the LED on or off, depending on the pushbutton}{figure.caption.93}{}}
+\newlabel{46@xvr}{{}{103}}
+\newlabel{46@vr}{{}{103}}
+\@writefile{lof}{\contentsline {figure}{\numberline {5.6}{\ignorespaces Turning the LED on or off, depending on the pushbutton}}{104}{figure.caption.93}\protected@file@percent }
+\newlabel{48@xvr}{{}{104}}
+\newlabel{48@vr}{{}{104}}
 \newlabel{fig:led-push-button}{{5.6}{104}{Turning the LED on or off, depending on the pushbutton}{figure.caption.93}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {5.2}{\ignorespaces Xcos parameters to turn the LED on through the pushbutton\relax }}{104}{table.caption.94}}
+\@writefile{lot}{\contentsline {table}{\numberline {5.2}{\ignorespaces Xcos parameters to turn the LED on through the pushbutton\relax }}{104}{table.caption.94}\protected@file@percent }
 \newlabel{tab:led-push-button}{{5.2}{104}{Xcos parameters to turn the LED on through the pushbutton\relax }{table.caption.94}{}}
-\newlabel{49@xvr}{{}{104}{Xcos parameters to turn the LED on through the pushbutton\relax }{table.caption.94}{}}
-\newlabel{49@vr}{{}{104}{Xcos parameters to turn the LED on through the pushbutton\relax }{table.caption.94}{}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{5.{1}}{}}{104}{egmass.5.1}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.6}Reading the pushbutton status from Python}{105}{section.5.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.6.1}Reading the pushbutton status}{105}{subsection.5.6.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push\textendash button\textendash status.py}{105}{lstlisting.5.-74}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push\textendash button\textendash status.py}{105}{lstlisting.5.-75}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led\textendash push\textendash button.py}{106}{lstlisting.5.-76}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.6.2}Python Code}{106}{subsection.5.6.2}}
+\newlabel{49@xvr}{{}{104}}
+\newlabel{49@vr}{{}{104}}
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{5.{1}}{}}{104}{egmass.5.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {5.6}Reading the pushbutton status from Python}{105}{section.5.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.6.1}Reading the pushbutton status}{105}{subsection.5.6.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push\textendash button\textendash status.py}{105}{lstlisting.5.-74}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push\textendash button\textendash status.py}{105}{lstlisting.5.-75}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led\textendash push\textendash button.py}{106}{lstlisting.5.-76}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.6.2}Python Code}{106}{subsection.5.6.2}\protected@file@percent }
 \newlabel{sec:push-python-code}{{5.6.2}{106}{Python Code}{subsection.5.6.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{5.{1}}{}}{106}{pymass.5.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Command Prompt or the Terminal}{106}{pymass.5.1}}
-\newlabel{50@xvr}{{}{106}{Python Code}{pymass.5.1}{}}
-\newlabel{50@vr}{{}{106}{Python Code}{pymass.5.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{5.{1}}{}}{106}{pymass.5.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Command Prompt or the Terminal}{106}{pymass.5.1}\protected@file@percent }
+\newlabel{50@xvr}{{}{106}}
+\newlabel{50@vr}{{}{106}}
 \newlabel{py:push-100}{{5.{1}}{106}{Python Code}{pymass.5.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push\textendash button\textendash status.py}{106}{lstlisting.5.-77}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{5.{2}}{}}{107}{pymass.5.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{107}{pymass.5.2}}
-\newlabel{51@xvr}{{}{107}{Python Code}{pymass.5.2}{}}
-\newlabel{51@vr}{{}{107}{Python Code}{pymass.5.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push\textendash button\textendash status.py}{106}{lstlisting.5.-77}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{5.{2}}{}}{107}{pymass.5.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{107}{pymass.5.2}\protected@file@percent }
+\newlabel{51@xvr}{{}{107}}
+\newlabel{51@vr}{{}{107}}
 \newlabel{py:push-200}{{5.{2}}{107}{Python Code}{pymass.5.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led\textendash push\textendash button.py}{107}{lstlisting.5.-78}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led\textendash push\textendash button.py}{107}{lstlisting.5.-78}\protected@file@percent }
 \citation{julia-serial-ports}
-\@writefile{toc}{\contentsline {section}{\numberline {5.7}Reading the pushbutton status from Julia}{108}{section.5.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.7.1}Reading the pushbutton status}{108}{subsection.5.7.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push\textendash button\textendash status.jl}{108}{lstlisting.5.-79}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push\textendash button\textendash status.jl}{108}{lstlisting.5.-80}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led\textendash push\textendash button.jl}{109}{lstlisting.5.-81}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.7.2}Julia Code}{109}{subsection.5.7.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {5.7}Reading the pushbutton status from Julia}{108}{section.5.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.7.1}Reading the pushbutton status}{108}{subsection.5.7.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push\textendash button\textendash status.jl}{108}{lstlisting.5.-79}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push\textendash button\textendash status.jl}{108}{lstlisting.5.-80}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led\textendash push\textendash button.jl}{109}{lstlisting.5.-81}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.7.2}Julia Code}{109}{subsection.5.7.2}\protected@file@percent }
 \newlabel{sec:push-julia-code}{{5.7.2}{109}{Julia Code}{subsection.5.7.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{5.{1}}{}}{109}{juliamass.5.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on Command Prompt or the Terminal.}{109}{juliamass.5.1}}
-\newlabel{52@xvr}{{}{109}{Julia Code}{juliamass.5.1}{}}
-\newlabel{52@vr}{{}{109}{Julia Code}{juliamass.5.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{5.{1}}{}}{109}{juliamass.5.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on Command Prompt or the Terminal.}{109}{juliamass.5.1}\protected@file@percent }
+\newlabel{52@xvr}{{}{109}}
+\newlabel{52@vr}{{}{109}}
 \newlabel{julia:push-100}{{5.{1}}{109}{Julia Code}{juliamass.5.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push\textendash button\textendash status.jl}{109}{lstlisting.5.-82}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{5.{2}}{}}{109}{juliamass.5.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{109}{juliamass.5.2}}
-\newlabel{53@xvr}{{}{109}{Julia Code}{juliamass.5.2}{}}
-\newlabel{53@vr}{{}{109}{Julia Code}{juliamass.5.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push\textendash button\textendash status.jl}{109}{lstlisting.5.-82}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{5.{2}}{}}{109}{juliamass.5.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{109}{juliamass.5.2}\protected@file@percent }
+\newlabel{53@xvr}{{}{109}}
+\newlabel{53@vr}{{}{109}}
 \newlabel{julia:push-200}{{5.{2}}{109}{Julia Code}{juliamass.5.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led\textendash push\textendash button.jl}{109}{lstlisting.5.-83}}
-\@writefile{toc}{\contentsline {section}{\numberline {5.8}Reading the pushbutton status from OpenModelica}{110}{section.5.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.8.1}Reading the pushbutton status}{110}{subsection.5.8.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push\textendash button\textendash status.mo}{110}{lstlisting.5.-84}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push\textendash button\textendash status.mo}{110}{lstlisting.5.-85}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led\textendash push\textendash button.mo}{111}{lstlisting.5.-86}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {5.8.2}OpenModelica Code}{111}{subsection.5.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led\textendash push\textendash button.jl}{109}{lstlisting.5.-83}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {5.8}Reading the pushbutton status from OpenModelica}{110}{section.5.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.8.1}Reading the pushbutton status}{110}{subsection.5.8.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push\textendash button\textendash status.mo}{110}{lstlisting.5.-84}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push\textendash button\textendash status.mo}{110}{lstlisting.5.-85}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led\textendash push\textendash button.mo}{111}{lstlisting.5.-86}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {5.8.2}OpenModelica Code}{111}{subsection.5.8.2}\protected@file@percent }
 \newlabel{sec:push-OpenModelica-code}{{5.8.2}{111}{OpenModelica Code}{subsection.5.8.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{1}}{}}{111}{OpenModelicamass.5.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the output window}{111}{OpenModelicamass.5.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{1}}{}}{111}{OpenModelicamass.5.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the output window}{111}{OpenModelicamass.5.1}\protected@file@percent }
 \newlabel{OpenModelica:push-100}{{5.{1}}{111}{OpenModelica Code}{OpenModelicamass.5.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push\textendash button\textendash status.mo}{111}{lstlisting.5.-87}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{2}}{}}{112}{OpenModelicamass.5.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{112}{OpenModelicamass.5.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push\textendash button\textendash status.mo}{111}{lstlisting.5.-87}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{2}}{}}{112}{OpenModelicamass.5.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{112}{OpenModelicamass.5.2}\protected@file@percent }
 \newlabel{OpenModelica:push-200}{{5.{2}}{112}{OpenModelica Code}{OpenModelicamass.5.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led\textendash push\textendash button.mo}{112}{lstlisting.5.-88}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {6}Interfacing a Light Dependent Resistor}{115}{chapter.6}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led\textendash push\textendash button.mo}{112}{lstlisting.5.-88}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {6}Interfacing a Light Dependent Resistor}{115}{chapter.6}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{ldr}{{6}{115}{Interfacing a Light Dependent Resistor}{chapter.6}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.1}Preliminaries}{115}{section.6.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {6.1}Preliminaries}{115}{section.6.1}\protected@file@percent }
 \newlabel{fig:ldr}{{6.1a}{116}{Subfigure 6 6.1a}{subfigure.6.1.1}{}}
 \newlabel{sub@fig:ldr}{{(a)}{a}{Subfigure 6 6.1a\relax }{subfigure.6.1.1}{}}
 \newlabel{fig:ldrsym}{{6.1b}{116}{Subfigure 6 6.1b}{subfigure.6.1.2}{}}
 \newlabel{sub@fig:ldrsym}{{(b)}{b}{Subfigure 6 6.1b\relax }{subfigure.6.1.2}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.1}{\ignorespaces Light Dependent Resistor\relax }}{116}{figure.caption.95}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Pictorial representation of an LDR}}}{116}{subfigure.1.1}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Symbolic representation of an LDR}}}{116}{subfigure.1.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.2}{\ignorespaces Internal connection diagram for the LDR on the shield\relax }}{116}{figure.caption.96}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6.1}{\ignorespaces Light Dependent Resistor\relax }}{116}{figure.caption.95}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Pictorial representation of an LDR}}}{116}{subfigure.1.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Symbolic representation of an LDR}}}{116}{subfigure.1.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {6.2}{\ignorespaces Internal connection diagram for the LDR on the shield\relax }}{116}{figure.caption.96}\protected@file@percent }
 \newlabel{fig:ldrconn}{{6.2}{116}{Internal connection diagram for the LDR on the shield\relax }{figure.caption.96}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.3}{\ignorespaces An LDR to read its values with Arduino Uno\ using a breadboard\relax }}{117}{figure.caption.97}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6.3}{\ignorespaces An LDR to read its values with Arduino Uno\ using a breadboard\relax }}{117}{figure.caption.97}\protected@file@percent }
 \newlabel{fig:ard-ldr}{{6.3}{117}{An LDR to read its values with \arduino \ using a breadboard\relax }{figure.caption.97}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.2}Connecting an LDR with Arduino Uno\ using a breadboard}{117}{section.6.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.4}{\ignorespaces An LDR to control an LED with Arduino Uno using a breadboard\relax }}{118}{figure.caption.98}}
+\@writefile{toc}{\contentsline {section}{\numberline {6.2}Connecting an LDR with Arduino Uno\ using a breadboard}{117}{section.6.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {6.4}{\ignorespaces An LDR to control an LED with Arduino Uno using a breadboard\relax }}{118}{figure.caption.98}\protected@file@percent }
 \newlabel{fig:ard-ldr-led}{{6.4}{118}{An LDR to control an LED with Arduino Uno using a breadboard\relax }{figure.caption.98}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.3}Interfacing the LDR through the Arduino IDE}{118}{section.6.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.1}Interfacing the LDR}{118}{subsection.6.3.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{118}{lstlisting.6.-89}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{119}{lstlisting.6.-90}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{119}{lstlisting.6.-91}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{1}}{}}{119}{egmass.6.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.2}Arduino Code}{120}{subsection.6.3.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {6.3}Interfacing the LDR through the Arduino IDE}{118}{section.6.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.1}Interfacing the LDR}{118}{subsection.6.3.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{118}{lstlisting.6.-89}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{119}{lstlisting.6.-90}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{119}{lstlisting.6.-91}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{1}}{}}{119}{egmass.6.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.2}Arduino Code}{120}{subsection.6.3.2}\protected@file@percent }
 \newlabel{sec:ldr-arduino-code}{{6.3.2}{120}{Arduino Code}{subsection.6.3.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{6.{1}}{}}{120}{ardmass.6.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{120}{ardmass.6.1}}
-\newlabel{54@xvr}{{}{120}{Arduino Code}{ardmass.6.1}{}}
-\newlabel{54@vr}{{}{120}{Arduino Code}{ardmass.6.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{6.{1}}{}}{120}{ardmass.6.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{120}{ardmass.6.1}\protected@file@percent }
+\newlabel{54@xvr}{{}{120}}
+\newlabel{54@vr}{{}{120}}
 \newlabel{ard:ldr-read}{{6.{1}}{120}{Arduino Code}{ardmass.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{120}{lstlisting.6.-92}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{6.{2}}{}}{120}{ardmass.6.2}}
-\@writefile{ard}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{120}{ardmass.6.2}}
-\newlabel{55@xvr}{{}{120}{Arduino Code}{ardmass.6.2}{}}
-\newlabel{55@vr}{{}{120}{Arduino Code}{ardmass.6.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr\textendash read/ldr\textendash read.ino}{120}{lstlisting.6.-92}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{6.{2}}{}}{120}{ardmass.6.2}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{120}{ardmass.6.2}\protected@file@percent }
+\newlabel{55@xvr}{{}{120}}
+\newlabel{55@vr}{{}{120}}
 \newlabel{ard:ldr-led}{{6.{2}}{120}{Arduino Code}{ardmass.6.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr\textendash led/ldr\textendash led.ino}{120}{lstlisting.6.-93}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.4}Interfacing the LDR through Scilab}{120}{section.6.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.4.1}Interfacing the LDR}{120}{subsection.6.4.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr\textendash read.sce}{121}{lstlisting.6.-94}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr\textendash read.sce}{121}{lstlisting.6.-95}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{2}}{}}{121}{egmass.6.2}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.4.2}Scilab Code}{122}{subsection.6.4.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr\textendash led/ldr\textendash led.ino}{120}{lstlisting.6.-93}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {6.4}Interfacing the LDR through Scilab}{120}{section.6.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.4.1}Interfacing the LDR}{120}{subsection.6.4.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr\textendash read.sce}{121}{lstlisting.6.-94}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr\textendash read.sce}{121}{lstlisting.6.-95}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{2}}{}}{121}{egmass.6.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.4.2}Scilab Code}{122}{subsection.6.4.2}\protected@file@percent }
 \newlabel{sec:ldr-scilab-code}{{6.4.2}{122}{Scilab Code}{subsection.6.4.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{6.{1}}{}}{122}{codemass.6.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{122}{codemass.6.1}}
-\newlabel{56@xvr}{{}{122}{Scilab Code}{codemass.6.1}{}}
-\newlabel{56@vr}{{}{122}{Scilab Code}{codemass.6.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{6.{1}}{}}{122}{codemass.6.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{122}{codemass.6.1}\protected@file@percent }
+\newlabel{56@xvr}{{}{122}}
+\newlabel{56@vr}{{}{122}}
 \newlabel{sci:ldr-read}{{6.{1}}{122}{Scilab Code}{codemass.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr\textendash read.sce}{122}{lstlisting.6.-96}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{6.{2}}{}}{122}{codemass.6.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{122}{codemass.6.2}}
-\newlabel{57@xvr}{{}{122}{Scilab Code}{codemass.6.2}{}}
-\newlabel{57@vr}{{}{122}{Scilab Code}{codemass.6.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr\textendash read.sce}{122}{lstlisting.6.-96}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{6.{2}}{}}{122}{codemass.6.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{122}{codemass.6.2}\protected@file@percent }
+\newlabel{57@xvr}{{}{122}}
+\newlabel{57@vr}{{}{122}}
 \newlabel{sci:ldr-led}{{6.{2}}{122}{Scilab Code}{codemass.6.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr\textendash led.sce}{122}{lstlisting.6.-97}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.5}Interfacing the LDR through Xcos}{122}{section.6.5}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.5}{\ignorespaces Xcos diagram to read LDR values}}{123}{figure.caption.99}}
-\newlabel{59@xvr}{{}{123}{Xcos diagram to read LDR values}{figure.caption.99}{}}
-\newlabel{59@vr}{{}{123}{Xcos diagram to read LDR values}{figure.caption.99}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr\textendash led.sce}{122}{lstlisting.6.-97}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {6.5}Interfacing the LDR through Xcos}{122}{section.6.5}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {6.5}{\ignorespaces Xcos diagram to read LDR values}}{123}{figure.caption.99}\protected@file@percent }
+\newlabel{59@xvr}{{}{123}}
+\newlabel{59@vr}{{}{123}}
 \newlabel{fig:ldr-read}{{6.5}{123}{Xcos diagram to read LDR values}{figure.caption.99}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.6}{\ignorespaces Plot window in Xcos to read LDR values\relax }}{123}{figure.caption.100}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6.6}{\ignorespaces Plot window in Xcos to read LDR values\relax }}{123}{figure.caption.100}\protected@file@percent }
 \newlabel{fig:ldr-read-plot}{{6.6}{123}{Plot window in Xcos to read LDR values\relax }{figure.caption.100}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {6.1}{\ignorespaces Xcos parameters to read LDR\relax }}{124}{table.caption.101}}
+\@writefile{lot}{\contentsline {table}{\numberline {6.1}{\ignorespaces Xcos parameters to read LDR\relax }}{124}{table.caption.101}\protected@file@percent }
 \newlabel{tab:ldr-read}{{6.1}{124}{Xcos parameters to read LDR\relax }{table.caption.101}{}}
-\newlabel{60@xvr}{{}{124}{Xcos parameters to read LDR\relax }{table.caption.101}{}}
-\newlabel{60@vr}{{}{124}{Xcos parameters to read LDR\relax }{table.caption.101}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.7}{\ignorespaces Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}}{125}{figure.caption.102}}
-\newlabel{62@xvr}{{}{125}{Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}{figure.caption.102}{}}
-\newlabel{62@vr}{{}{125}{Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}{figure.caption.102}{}}
+\newlabel{60@xvr}{{}{124}}
+\newlabel{60@vr}{{}{124}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6.7}{\ignorespaces Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}}{125}{figure.caption.102}\protected@file@percent }
+\newlabel{62@xvr}{{}{125}}
+\newlabel{62@vr}{{}{125}}
 \newlabel{fig:ldr-led}{{6.7}{125}{Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}{figure.caption.102}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {6.8}{\ignorespaces Plot window in Xcos to read LDR values and the state of LED\relax }}{125}{figure.caption.103}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6.8}{\ignorespaces Plot window in Xcos to read LDR values and the state of LED\relax }}{125}{figure.caption.103}\protected@file@percent }
 \newlabel{fig:ldr-led-read-plot}{{6.8}{125}{Plot window in Xcos to read LDR values and the state of LED\relax }{figure.caption.103}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {6.2}{\ignorespaces Xcos parameters to read LDR and regulate blue LED\relax }}{126}{table.caption.104}}
+\@writefile{lot}{\contentsline {table}{\numberline {6.2}{\ignorespaces Xcos parameters to read LDR and regulate blue LED\relax }}{126}{table.caption.104}\protected@file@percent }
 \newlabel{tab:ldr-led}{{6.2}{126}{Xcos parameters to read LDR and regulate blue LED\relax }{table.caption.104}{}}
-\newlabel{63@xvr}{{}{126}{Xcos parameters to read LDR and regulate blue LED\relax }{table.caption.104}{}}
-\newlabel{63@vr}{{}{126}{Xcos parameters to read LDR and regulate blue LED\relax }{table.caption.104}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.6}Interfacing the LDR through Python}{126}{section.6.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.6.1}Interfacing the LDR}{126}{subsection.6.6.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr\textendash read.py}{126}{lstlisting.6.-98}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr\textendash read.py}{127}{lstlisting.6.-99}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{3}}{}}{127}{egmass.6.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.6.2}Python Code}{127}{subsection.6.6.2}}
+\newlabel{63@xvr}{{}{126}}
+\newlabel{63@vr}{{}{126}}
+\@writefile{toc}{\contentsline {section}{\numberline {6.6}Interfacing the LDR through Python}{126}{section.6.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.6.1}Interfacing the LDR}{126}{subsection.6.6.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr\textendash read.py}{126}{lstlisting.6.-98}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr\textendash read.py}{127}{lstlisting.6.-99}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{3}}{}}{127}{egmass.6.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.6.2}Python Code}{127}{subsection.6.6.2}\protected@file@percent }
 \newlabel{sec:ldr-python-code}{{6.6.2}{127}{Python Code}{subsection.6.6.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{6.{1}}{}}{127}{pymass.6.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{127}{pymass.6.1}}
-\newlabel{64@xvr}{{}{127}{Python Code}{pymass.6.1}{}}
-\newlabel{64@vr}{{}{127}{Python Code}{pymass.6.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{6.{1}}{}}{127}{pymass.6.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{127}{pymass.6.1}\protected@file@percent }
+\newlabel{64@xvr}{{}{127}}
+\newlabel{64@vr}{{}{127}}
 \newlabel{py:ldr-read}{{6.{1}}{127}{Python Code}{pymass.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr\textendash read.py}{127}{lstlisting.6.-100}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{6.{2}}{}}{128}{pymass.6.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{128}{pymass.6.2}}
-\newlabel{65@xvr}{{}{128}{Python Code}{pymass.6.2}{}}
-\newlabel{65@vr}{{}{128}{Python Code}{pymass.6.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr\textendash read.py}{127}{lstlisting.6.-100}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{6.{2}}{}}{128}{pymass.6.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{128}{pymass.6.2}\protected@file@percent }
+\newlabel{65@xvr}{{}{128}}
+\newlabel{65@vr}{{}{128}}
 \newlabel{py:ldr-led}{{6.{2}}{128}{Python Code}{pymass.6.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr\textendash led.py}{128}{lstlisting.6.-101}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr\textendash led.py}{128}{lstlisting.6.-101}\protected@file@percent }
 \citation{julia-serial-ports}
-\@writefile{toc}{\contentsline {section}{\numberline {6.7}Interfacing the LDR through Julia}{129}{section.6.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.7.1}Interfacing the LDR}{129}{subsection.6.7.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr\textendash read.jl}{130}{lstlisting.6.-102}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr\textendash read.jl}{130}{lstlisting.6.-103}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{4}}{}}{130}{egmass.6.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.7.2}Julia Code}{130}{subsection.6.7.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {6.7}Interfacing the LDR through Julia}{129}{section.6.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.7.1}Interfacing the LDR}{129}{subsection.6.7.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr\textendash read.jl}{130}{lstlisting.6.-102}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr\textendash read.jl}{130}{lstlisting.6.-103}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{6.{4}}{}}{130}{egmass.6.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.7.2}Julia Code}{130}{subsection.6.7.2}\protected@file@percent }
 \newlabel{sec:ldr-julia-code}{{6.7.2}{130}{Julia Code}{subsection.6.7.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{6.{1}}{}}{130}{juliamass.6.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{130}{juliamass.6.1}}
-\newlabel{66@xvr}{{}{130}{Julia Code}{juliamass.6.1}{}}
-\newlabel{66@vr}{{}{130}{Julia Code}{juliamass.6.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{6.{1}}{}}{130}{juliamass.6.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{130}{juliamass.6.1}\protected@file@percent }
+\newlabel{66@xvr}{{}{130}}
+\newlabel{66@vr}{{}{130}}
 \newlabel{julia:ldr-read}{{6.{1}}{130}{Julia Code}{juliamass.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr\textendash read.jl}{131}{lstlisting.6.-104}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{6.{2}}{}}{131}{juliamass.6.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{131}{juliamass.6.2}}
-\newlabel{67@xvr}{{}{131}{Julia Code}{juliamass.6.2}{}}
-\newlabel{67@vr}{{}{131}{Julia Code}{juliamass.6.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr\textendash read.jl}{131}{lstlisting.6.-104}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{6.{2}}{}}{131}{juliamass.6.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{131}{juliamass.6.2}\protected@file@percent }
+\newlabel{67@xvr}{{}{131}}
+\newlabel{67@vr}{{}{131}}
 \newlabel{julia:ldr-led}{{6.{2}}{131}{Julia Code}{juliamass.6.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr\textendash led.jl}{131}{lstlisting.6.-105}}
-\@writefile{toc}{\contentsline {section}{\numberline {6.8}Interfacing the LDR through OpenModelica}{131}{section.6.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.8.1}Interfacing the LDR}{131}{subsection.6.8.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr\textendash read.mo}{132}{lstlisting.6.-106}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr\textendash read.mo}{132}{lstlisting.6.-107}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {6.8.2}OpenModelica Code}{132}{subsection.6.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr\textendash led.jl}{131}{lstlisting.6.-105}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {6.8}Interfacing the LDR through OpenModelica}{131}{section.6.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.8.1}Interfacing the LDR}{131}{subsection.6.8.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr\textendash read.mo}{132}{lstlisting.6.-106}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr\textendash read.mo}{132}{lstlisting.6.-107}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {6.8.2}OpenModelica Code}{132}{subsection.6.8.2}\protected@file@percent }
 \newlabel{sec:ldr-OpenModelica-code}{{6.8.2}{132}{OpenModelica Code}{subsection.6.8.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{1}}{}}{132}{OpenModelicamass.6.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{132}{OpenModelicamass.6.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{1}}{}}{132}{OpenModelicamass.6.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{132}{OpenModelicamass.6.1}\protected@file@percent }
 \newlabel{OpenModelica:ldr-read}{{6.{1}}{132}{OpenModelica Code}{OpenModelicamass.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr\textendash read.mo}{132}{lstlisting.6.-108}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{2}}{}}{133}{OpenModelicamass.6.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{133}{OpenModelicamass.6.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr\textendash read.mo}{132}{lstlisting.6.-108}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{2}}{}}{133}{OpenModelicamass.6.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{133}{OpenModelicamass.6.2}\protected@file@percent }
 \newlabel{OpenModelica:ldr-led}{{6.{2}}{133}{OpenModelica Code}{OpenModelicamass.6.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr\textendash led.mo}{133}{lstlisting.6.-109}}
-\@writefile{toc}{\contentsline {chapter}{\numberline {7}Interfacing a Potentiometer}{135}{chapter.7}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr\textendash led.mo}{133}{lstlisting.6.-109}\protected@file@percent }
+\@writefile{toc}{\contentsline {chapter}{\numberline {7}Interfacing a Potentiometer}{135}{chapter.7}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{potmeter}{{7}{135}{Interfacing a Potentiometer}{chapter.7}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.1}Preliminaries}{135}{section.7.1}}
-\newlabel{68@xvr}{{}{135}{Preliminaries}{figure.caption.105}{}}
-\newlabel{68@vr}{{}{135}{Preliminaries}{figure.caption.105}{}}
+\@writefile{toc}{\contentsline {section}{\numberline {7.1}Preliminaries}{135}{section.7.1}\protected@file@percent }
+\newlabel{68@xvr}{{}{135}}
+\newlabel{68@vr}{{}{135}}
 \newlabel{fig:pot}{{7.1a}{136}{Subfigure 7 7.1a}{subfigure.7.1.1}{}}
 \newlabel{sub@fig:pot}{{(a)}{a}{Subfigure 7 7.1a\relax }{subfigure.7.1.1}{}}
 \newlabel{fig:potsch}{{7.1b}{136}{Subfigure 7 7.1b}{subfigure.7.1.2}{}}
 \newlabel{sub@fig:potsch}{{(b)}{b}{Subfigure 7 7.1b\relax }{subfigure.7.1.2}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {7.1}{\ignorespaces Potentiometer's schematic on the shield\relax }}{136}{figure.caption.105}}
+\@writefile{lof}{\contentsline {figure}{\numberline {7.1}{\ignorespaces Potentiometer's schematic on the shield\relax }}{136}{figure.caption.105}\protected@file@percent }
 \newlabel{fig:potmeterconn}{{7.1}{136}{Potentiometer's schematic on the shield\relax }{figure.caption.105}{}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Pictorial representation of a potentiometer}}}{136}{subfigure.1.1}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Internal connection diagram for the potentiometer on the shield}}}{136}{subfigure.1.2}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.2}Connecting a potentiometer with Arduino Uno\ using a breadboard}{136}{section.7.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {7.2}{\ignorespaces A potentiometer to control an LED with Arduino Uno using a breadboard\relax }}{137}{figure.caption.106}}
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Pictorial representation of a potentiometer}}}{136}{subfigure.1.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Internal connection diagram for the potentiometer on the shield}}}{136}{subfigure.1.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {7.2}Connecting a potentiometer with Arduino Uno\ using a breadboard}{136}{section.7.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {7.2}{\ignorespaces A potentiometer to control an LED with Arduino Uno using a breadboard\relax }}{137}{figure.caption.106}\protected@file@percent }
 \newlabel{fig:pot-led}{{7.2}{137}{A potentiometer to control an LED with Arduino Uno using a breadboard\relax }{figure.caption.106}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.3}Reading the potentiometer from the Arduino IDE}{137}{section.7.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.3.1}Reading the potentiometer}{137}{subsection.7.3.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot\textendash threshold/pot\textendash threshold.ino}{138}{lstlisting.7.-110}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot\textendash threshold/pot\textendash threshold.ino}{138}{lstlisting.7.-111}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.3.2}Arduino Code}{138}{subsection.7.3.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {7.3}Reading the potentiometer from the Arduino IDE}{137}{section.7.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.3.1}Reading the potentiometer}{137}{subsection.7.3.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot\textendash threshold/pot\textendash threshold.ino}{138}{lstlisting.7.-110}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot\textendash threshold/pot\textendash threshold.ino}{138}{lstlisting.7.-111}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.3.2}Arduino Code}{138}{subsection.7.3.2}\protected@file@percent }
 \newlabel{sec:pot-arduino-code}{{7.3.2}{138}{Arduino Code}{subsection.7.3.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{7.{1}}{}}{138}{ardmass.7.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{138}{ardmass.7.1}}
-\newlabel{69@xvr}{{}{138}{Arduino Code}{ardmass.7.1}{}}
-\newlabel{69@vr}{{}{138}{Arduino Code}{ardmass.7.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{7.{1}}{}}{138}{ardmass.7.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{138}{ardmass.7.1}\protected@file@percent }
+\newlabel{69@xvr}{{}{138}}
+\newlabel{69@vr}{{}{138}}
 \newlabel{ard:pot-100}{{7.{1}}{138}{Arduino Code}{ardmass.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot\textendash threshold/pot\textendash threshold.ino}{138}{lstlisting.7.-112}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.4}Reading the potentiometer from Scilab}{139}{section.7.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.4.1}Reading the potentiometer}{139}{subsection.7.4.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot\textendash threshold.sce}{140}{lstlisting.7.-113}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot\textendash threshold.sce}{140}{lstlisting.7.-114}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.4.2}Scilab Code}{140}{subsection.7.4.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot\textendash threshold/pot\textendash threshold.ino}{138}{lstlisting.7.-112}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {7.4}Reading the potentiometer from Scilab}{139}{section.7.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.4.1}Reading the potentiometer}{139}{subsection.7.4.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot\textendash threshold.sce}{140}{lstlisting.7.-113}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot\textendash threshold.sce}{140}{lstlisting.7.-114}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.4.2}Scilab Code}{140}{subsection.7.4.2}\protected@file@percent }
 \newlabel{sec:pot-scilab-code}{{7.4.2}{140}{Scilab Code}{subsection.7.4.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{7.{1}}{}}{140}{codemass.7.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{140}{codemass.7.1}}
-\newlabel{70@xvr}{{}{140}{Scilab Code}{codemass.7.1}{}}
-\newlabel{70@vr}{{}{140}{Scilab Code}{codemass.7.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{7.{1}}{}}{140}{codemass.7.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{140}{codemass.7.1}\protected@file@percent }
+\newlabel{70@xvr}{{}{140}}
+\newlabel{70@vr}{{}{140}}
 \newlabel{sci:pot-100}{{7.{1}}{140}{Scilab Code}{codemass.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot\textendash threshold.sce}{140}{lstlisting.7.-115}}
-\@writefile{lof}{\contentsline {figure}{\numberline {7.3}{\ignorespaces Turning LEDs on through Xcos depending on the potentiometer threshold}}{141}{figure.caption.107}}
-\newlabel{72@xvr}{{}{141}{Turning LEDs on through Xcos depending on the potentiometer threshold}{figure.caption.107}{}}
-\newlabel{72@vr}{{}{141}{Turning LEDs on through Xcos depending on the potentiometer threshold}{figure.caption.107}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot\textendash threshold.sce}{140}{lstlisting.7.-115}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {7.3}{\ignorespaces Turning LEDs on through Xcos depending on the potentiometer threshold}}{141}{figure.caption.107}\protected@file@percent }
+\newlabel{72@xvr}{{}{141}}
+\newlabel{72@vr}{{}{141}}
 \newlabel{fig:pot-threshold}{{7.3}{141}{Turning LEDs on through Xcos depending on the potentiometer threshold}{figure.caption.107}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.5}Reading the potentiometer from Xcos}{141}{section.7.5}}
-\@writefile{lot}{\contentsline {table}{\numberline {7.1}{\ignorespaces Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }}{142}{table.caption.108}}
+\@writefile{toc}{\contentsline {section}{\numberline {7.5}Reading the potentiometer from Xcos}{141}{section.7.5}\protected@file@percent }
+\@writefile{lot}{\contentsline {table}{\numberline {7.1}{\ignorespaces Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }}{142}{table.caption.108}\protected@file@percent }
 \newlabel{tab:pot-threshold}{{7.1}{142}{Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }{table.caption.108}{}}
-\newlabel{73@xvr}{{}{142}{Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }{table.caption.108}{}}
-\newlabel{73@vr}{{}{142}{Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }{table.caption.108}{}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{7.{1}}{}}{142}{egmass.7.1}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.6}Reading the potentiometer from Python}{143}{section.7.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.1}Reading the potentiometer}{143}{subsection.7.6.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot\textendash threshold.py}{143}{lstlisting.7.-116}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot\textendash threshold.py}{143}{lstlisting.7.-117}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.2}Python Code}{143}{subsection.7.6.2}}
+\newlabel{73@xvr}{{}{142}}
+\newlabel{73@vr}{{}{142}}
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{7.{1}}{}}{142}{egmass.7.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {7.6}Reading the potentiometer from Python}{143}{section.7.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.1}Reading the potentiometer}{143}{subsection.7.6.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot\textendash threshold.py}{143}{lstlisting.7.-116}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot\textendash threshold.py}{143}{lstlisting.7.-117}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.2}Python Code}{143}{subsection.7.6.2}\protected@file@percent }
 \newlabel{sec:pot-python-code}{{7.6.2}{143}{Python Code}{subsection.7.6.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{7.{1}}{}}{143}{pymass.7.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{143}{pymass.7.1}}
-\newlabel{74@xvr}{{}{143}{Python Code}{pymass.7.1}{}}
-\newlabel{74@vr}{{}{143}{Python Code}{pymass.7.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{7.{1}}{}}{143}{pymass.7.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{143}{pymass.7.1}\protected@file@percent }
+\newlabel{74@xvr}{{}{143}}
+\newlabel{74@vr}{{}{143}}
 \newlabel{py:pot-100}{{7.{1}}{143}{Python Code}{pymass.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot\textendash threshold.py}{143}{lstlisting.7.-118}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot\textendash threshold.py}{143}{lstlisting.7.-118}\protected@file@percent }
 \citation{julia-serial-ports}
-\@writefile{toc}{\contentsline {section}{\numberline {7.7}Reading the potentiometer from Julia}{145}{section.7.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.7.1}Reading the potentiometer}{145}{subsection.7.7.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot\textendash threshold.jl}{145}{lstlisting.7.-119}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot\textendash threshold.jl}{145}{lstlisting.7.-120}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.7.2}Julia Code}{145}{subsection.7.7.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {7.7}Reading the potentiometer from Julia}{145}{section.7.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.7.1}Reading the potentiometer}{145}{subsection.7.7.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot\textendash threshold.jl}{145}{lstlisting.7.-119}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot\textendash threshold.jl}{145}{lstlisting.7.-120}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.7.2}Julia Code}{145}{subsection.7.7.2}\protected@file@percent }
 \newlabel{sec:pot-julia-code}{{7.7.2}{145}{Julia Code}{subsection.7.7.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{7.{1}}{}}{145}{juliamass.7.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{145}{juliamass.7.1}}
-\newlabel{75@xvr}{{}{145}{Julia Code}{juliamass.7.1}{}}
-\newlabel{75@vr}{{}{145}{Julia Code}{juliamass.7.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{7.{1}}{}}{145}{juliamass.7.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{145}{juliamass.7.1}\protected@file@percent }
+\newlabel{75@xvr}{{}{145}}
+\newlabel{75@vr}{{}{145}}
 \newlabel{julia:pot-100}{{7.{1}}{145}{Julia Code}{juliamass.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot\textendash threshold.jl}{145}{lstlisting.7.-121}}
-\@writefile{toc}{\contentsline {section}{\numberline {7.8}Reading the potentiometer from OpenModelica}{146}{section.7.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.8.1}Reading the potentiometer}{146}{subsection.7.8.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot\textendash threshold.mo}{146}{lstlisting.7.-122}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot\textendash threshold.mo}{146}{lstlisting.7.-123}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {7.8.2}OpenModelica Code}{147}{subsection.7.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot\textendash threshold.jl}{145}{lstlisting.7.-121}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {7.8}Reading the potentiometer from OpenModelica}{146}{section.7.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.8.1}Reading the potentiometer}{146}{subsection.7.8.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot\textendash threshold.mo}{146}{lstlisting.7.-122}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot\textendash threshold.mo}{146}{lstlisting.7.-123}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {7.8.2}OpenModelica Code}{147}{subsection.7.8.2}\protected@file@percent }
 \newlabel{sec:pot-OpenModelica-code}{{7.8.2}{147}{OpenModelica Code}{subsection.7.8.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{7.{1}}{}}{147}{OpenModelicamass.7.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{147}{OpenModelicamass.7.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{7.{1}}{}}{147}{OpenModelicamass.7.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{147}{OpenModelicamass.7.1}\protected@file@percent }
 \newlabel{OpenModelica:pot-100}{{7.{1}}{147}{OpenModelica Code}{OpenModelicamass.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot\textendash threshold.mo}{147}{lstlisting.7.-124}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot\textendash threshold.mo}{147}{lstlisting.7.-124}\protected@file@percent }
 \citation{therm-wiki}
 \citation{therm-wiki}
-\@writefile{toc}{\contentsline {chapter}{\numberline {8}Interfacing a Thermistor}{149}{chapter.8}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {8}Interfacing a Thermistor}{149}{chapter.8}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{thermistor}{{8}{149}{Interfacing a Thermistor}{chapter.8}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.1}Preliminaries}{149}{section.8.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {8.1}Preliminaries}{149}{section.8.1}\protected@file@percent }
 \newlabel{fig:therm}{{8.1a}{150}{Subfigure 8 8.1a}{subfigure.8.1.1}{}}
 \newlabel{sub@fig:therm}{{(a)}{a}{Subfigure 8 8.1a\relax }{subfigure.8.1.1}{}}
 \newlabel{fig:thermsym}{{8.1b}{150}{Subfigure 8 8.1b}{subfigure.8.1.2}{}}
 \newlabel{sub@fig:thermsym}{{(b)}{b}{Subfigure 8 8.1b\relax }{subfigure.8.1.2}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.1}{\ignorespaces Pictorial and symbolic representation of a thermistor\relax }}{150}{figure.caption.109}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Pictorial representation of a thermistor\cite {therm-wiki}}}}{150}{subfigure.1.1}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Symbolic representation of a thermistor}}}{150}{subfigure.1.2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {8.1}{\ignorespaces Pictorial and symbolic representation of a thermistor\relax }}{150}{figure.caption.109}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Pictorial representation of a thermistor\cite {therm-wiki}}}}{150}{subfigure.1.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Symbolic representation of a thermistor}}}{150}{subfigure.1.2}\protected@file@percent }
 \newlabel{fig:therm-conn}{{8.2a}{150}{Subfigure 8 8.2a}{subfigure.8.2.1}{}}
 \newlabel{sub@fig:therm-conn}{{(a)}{a}{Subfigure 8 8.2a\relax }{subfigure.8.2.1}{}}
 \newlabel{fig:buzzer-conn}{{8.2b}{150}{Subfigure 8 8.2b}{subfigure.8.2.2}{}}
 \newlabel{sub@fig:buzzer-conn}{{(b)}{b}{Subfigure 8 8.2b\relax }{subfigure.8.2.2}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.2}{\ignorespaces Internal connection diagrams for thermistor and buzzer on the shield\relax }}{150}{figure.caption.110}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Thermistor connection diagram}}}{150}{subfigure.2.1}}
-\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Buzzer connection diagram}}}{150}{subfigure.2.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.3}{\ignorespaces A thermistor to read its values with Arduino Uno using a breadboard\relax }}{151}{figure.caption.111}}
+\@writefile{lof}{\contentsline {figure}{\numberline {8.2}{\ignorespaces Internal connection diagrams for thermistor and buzzer on the shield\relax }}{150}{figure.caption.110}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(a)}{\ignorespaces {Thermistor connection diagram}}}{150}{subfigure.2.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {subfigure}{\numberline{(b)}{\ignorespaces {Buzzer connection diagram}}}{150}{subfigure.2.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {8.3}{\ignorespaces A thermistor to read its values with Arduino Uno using a breadboard\relax }}{151}{figure.caption.111}\protected@file@percent }
 \newlabel{fig:ard-therm-bread}{{8.3}{151}{A thermistor to read its values with Arduino Uno using a breadboard\relax }{figure.caption.111}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.2}Connecting a thermistor with Arduino Uno\ using a breadboard}{151}{section.8.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.4}{\ignorespaces A thermistor to control a buzzer with Arduino Uno using a breadboard\relax }}{152}{figure.caption.112}}
+\@writefile{toc}{\contentsline {section}{\numberline {8.2}Connecting a thermistor with Arduino Uno\ using a breadboard}{151}{section.8.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {8.4}{\ignorespaces A thermistor to control a buzzer with Arduino Uno using a breadboard\relax }}{152}{figure.caption.112}\protected@file@percent }
 \newlabel{fig:ard-therm-buzzer}{{8.4}{152}{A thermistor to control a buzzer with Arduino Uno using a breadboard\relax }{figure.caption.112}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.3}Interfacing the thermistor from the Arduino IDE}{152}{section.8.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.3.1}Interfacing the thermistor}{152}{subsection.8.3.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{152}{lstlisting.8.-125}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{153}{lstlisting.8.-126}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{153}{lstlisting.8.-127}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm\textendash buzzer/therm\textendash buzzer.ino}{154}{lstlisting.8.-128}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{154}{section*.113}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{8.{1}}{}}{154}{egmass.8.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.3.2}Arduino Code}{154}{subsection.8.3.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {8.3}Interfacing the thermistor from the Arduino IDE}{152}{section.8.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.3.1}Interfacing the thermistor}{152}{subsection.8.3.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{152}{lstlisting.8.-125}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{153}{lstlisting.8.-126}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{153}{lstlisting.8.-127}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm\textendash buzzer/therm\textendash buzzer.ino}{154}{lstlisting.8.-128}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{154}{section*.113}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{8.{1}}{}}{154}{egmass.8.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.3.2}Arduino Code}{154}{subsection.8.3.2}\protected@file@percent }
 \newlabel{sec:therm-arduino-code}{{8.3.2}{154}{Arduino Code}{subsection.8.3.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{8.{1}}{}}{154}{ardmass.8.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{154}{ardmass.8.1}}
-\newlabel{76@xvr}{{}{154}{Arduino Code}{ardmass.8.1}{}}
-\newlabel{76@vr}{{}{154}{Arduino Code}{ardmass.8.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{8.{1}}{}}{154}{ardmass.8.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{154}{ardmass.8.1}\protected@file@percent }
+\newlabel{76@xvr}{{}{154}}
+\newlabel{76@vr}{{}{154}}
 \newlabel{ard:therm-read}{{8.{1}}{154}{Arduino Code}{ardmass.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{154}{lstlisting.8.-129}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{8.{2}}{}}{155}{ardmass.8.2}}
-\@writefile{ard}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{155}{ardmass.8.2}}
-\newlabel{77@xvr}{{}{155}{Arduino Code}{ardmass.8.2}{}}
-\newlabel{77@vr}{{}{155}{Arduino Code}{ardmass.8.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm\textendash read/therm\textendash read.ino}{154}{lstlisting.8.-129}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{8.{2}}{}}{155}{ardmass.8.2}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{155}{ardmass.8.2}\protected@file@percent }
+\newlabel{77@xvr}{{}{155}}
+\newlabel{77@vr}{{}{155}}
 \newlabel{ard:therm-buzzer}{{8.{2}}{155}{Arduino Code}{ardmass.8.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm\textendash buzzer/therm\textendash buzzer.ino}{155}{lstlisting.8.-130}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.4}Interfacing the thermistor from Scilab}{156}{section.8.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.1}Interfacing the thermistor}{156}{subsection.8.4.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm\textendash read.sce}{156}{lstlisting.8.-131}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm\textendash read.sce}{156}{lstlisting.8.-132}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm\textendash buzzer.sce}{157}{lstlisting.8.-133}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{157}{section*.114}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{8.{2}}{}}{157}{egmass.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm\textendash buzzer/therm\textendash buzzer.ino}{155}{lstlisting.8.-130}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {8.4}Interfacing the thermistor from Scilab}{156}{section.8.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.1}Interfacing the thermistor}{156}{subsection.8.4.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm\textendash read.sce}{156}{lstlisting.8.-131}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm\textendash read.sce}{156}{lstlisting.8.-132}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm\textendash buzzer.sce}{157}{lstlisting.8.-133}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{157}{section*.114}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{8.{2}}{}}{157}{egmass.8.2}\protected@file@percent }
 \newlabel{therm-abc}{{8.1}{157}{Interfacing the thermistor}{equation.8.4.1}{}}
 \newlabel{therm-beta}{{8.2}{158}{Interfacing the thermistor}{equation.8.4.2}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.2}Scilab Code}{158}{subsection.8.4.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.2}Scilab Code}{158}{subsection.8.4.2}\protected@file@percent }
 \newlabel{sec:therm-scilab-code}{{8.4.2}{158}{Scilab Code}{subsection.8.4.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{8.{1}}{}}{158}{codemass.8.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{158}{codemass.8.1}}
-\newlabel{78@xvr}{{}{158}{Scilab Code}{codemass.8.1}{}}
-\newlabel{78@vr}{{}{158}{Scilab Code}{codemass.8.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{8.{1}}{}}{158}{codemass.8.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{158}{codemass.8.1}\protected@file@percent }
+\newlabel{78@xvr}{{}{158}}
+\newlabel{78@vr}{{}{158}}
 \newlabel{sci:therm-read}{{8.{1}}{158}{Scilab Code}{codemass.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm\textendash read.sce}{158}{lstlisting.8.-134}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{8.{2}}{}}{158}{codemass.8.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{158}{codemass.8.2}}
-\newlabel{79@xvr}{{}{158}{Scilab Code}{codemass.8.2}{}}
-\newlabel{79@vr}{{}{158}{Scilab Code}{codemass.8.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm\textendash read.sce}{158}{lstlisting.8.-134}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{8.{2}}{}}{158}{codemass.8.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{158}{codemass.8.2}\protected@file@percent }
+\newlabel{79@xvr}{{}{158}}
+\newlabel{79@vr}{{}{158}}
 \newlabel{sci:therm-buzzer}{{8.{2}}{158}{Scilab Code}{codemass.8.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm\textendash buzzer.sce}{159}{lstlisting.8.-135}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.5}Interfacing the thermistor from Xcos}{159}{section.8.5}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.5}{\ignorespaces Xcos diagram to read thermistor values}}{160}{figure.caption.115}}
-\newlabel{81@xvr}{{}{160}{Xcos diagram to read thermistor values}{figure.caption.115}{}}
-\newlabel{81@vr}{{}{160}{Xcos diagram to read thermistor values}{figure.caption.115}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm\textendash buzzer.sce}{159}{lstlisting.8.-135}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {8.5}Interfacing the thermistor from Xcos}{159}{section.8.5}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {8.5}{\ignorespaces Xcos diagram to read thermistor values}}{160}{figure.caption.115}\protected@file@percent }
+\newlabel{81@xvr}{{}{160}}
+\newlabel{81@vr}{{}{160}}
 \newlabel{fig:therm-read}{{8.5}{160}{Xcos diagram to read thermistor values}{figure.caption.115}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {8.1}{\ignorespaces Xcos parameters to read thermistor\relax }}{160}{table.caption.116}}
+\@writefile{lot}{\contentsline {table}{\numberline {8.1}{\ignorespaces Xcos parameters to read thermistor\relax }}{160}{table.caption.116}\protected@file@percent }
 \newlabel{tab:therm-read}{{8.1}{160}{Xcos parameters to read thermistor\relax }{table.caption.116}{}}
-\newlabel{82@xvr}{{}{160}{Xcos parameters to read thermistor\relax }{table.caption.116}{}}
-\newlabel{82@vr}{{}{160}{Xcos parameters to read thermistor\relax }{table.caption.116}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.6}{\ignorespaces Plot window in Xcos to read thermistor values\relax }}{161}{figure.caption.117}}
+\newlabel{82@xvr}{{}{160}}
+\newlabel{82@vr}{{}{160}}
+\@writefile{lof}{\contentsline {figure}{\numberline {8.6}{\ignorespaces Plot window in Xcos to read thermistor values\relax }}{161}{figure.caption.117}\protected@file@percent }
 \newlabel{fig:therm-read-output}{{8.6}{161}{Plot window in Xcos to read thermistor values\relax }{figure.caption.117}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.7}{\ignorespaces Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}}{161}{figure.caption.118}}
-\newlabel{84@xvr}{{}{161}{Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}{figure.caption.118}{}}
-\newlabel{84@vr}{{}{161}{Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}{figure.caption.118}{}}
+\@writefile{lof}{\contentsline {figure}{\numberline {8.7}{\ignorespaces Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}}{161}{figure.caption.118}\protected@file@percent }
+\newlabel{84@xvr}{{}{161}}
+\newlabel{84@vr}{{}{161}}
 \newlabel{fig:therm-buzzer}{{8.7}{161}{Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}{figure.caption.118}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {8.2}{\ignorespaces Xcos parameters to read thermistor and switch the buzzer\relax }}{162}{table.caption.119}}
+\@writefile{lot}{\contentsline {table}{\numberline {8.2}{\ignorespaces Xcos parameters to read thermistor and switch the buzzer\relax }}{162}{table.caption.119}\protected@file@percent }
 \newlabel{tab:therm-buzzer}{{8.2}{162}{Xcos parameters to read thermistor and switch the buzzer\relax }{table.caption.119}{}}
-\newlabel{85@xvr}{{}{162}{Xcos parameters to read thermistor and switch the buzzer\relax }{table.caption.119}{}}
-\newlabel{85@vr}{{}{162}{Xcos parameters to read thermistor and switch the buzzer\relax }{table.caption.119}{}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{162}{section*.121}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.6}Interfacing the thermistor from Python}{162}{section.8.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.1}Interfacing the thermistor}{162}{subsection.8.6.1}}
-\@writefile{lof}{\contentsline {figure}{\numberline {8.8}{\ignorespaces Plot window in Xcos to read thermistor values and the state of LED\relax }}{163}{figure.caption.120}}
+\newlabel{85@xvr}{{}{162}}
+\newlabel{85@vr}{{}{162}}
+\@writefile{toc}{\contentsline {paragraph}{Note:}{162}{section*.121}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {8.6}Interfacing the thermistor from Python}{162}{section.8.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.1}Interfacing the thermistor}{162}{subsection.8.6.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {8.8}{\ignorespaces Plot window in Xcos to read thermistor values and the state of LED\relax }}{163}{figure.caption.120}\protected@file@percent }
 \newlabel{fig:therm-buzzer-output}{{8.8}{163}{Plot window in Xcos to read thermistor values and the state of LED\relax }{figure.caption.120}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm\textendash read.py}{163}{lstlisting.8.-136}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm\textendash read.py}{163}{lstlisting.8.-137}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm\textendash buzzer.py}{164}{lstlisting.8.-138}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{164}{section*.122}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.2}Python Code}{165}{subsection.8.6.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm\textendash read.py}{163}{lstlisting.8.-136}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm\textendash read.py}{163}{lstlisting.8.-137}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm\textendash buzzer.py}{164}{lstlisting.8.-138}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{164}{section*.122}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.2}Python Code}{165}{subsection.8.6.2}\protected@file@percent }
 \newlabel{sec:therm-pyhton-code}{{8.6.2}{165}{Python Code}{subsection.8.6.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{8.{1}}{}}{165}{pymass.8.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{165}{pymass.8.1}}
-\newlabel{86@xvr}{{}{165}{Python Code}{pymass.8.1}{}}
-\newlabel{86@vr}{{}{165}{Python Code}{pymass.8.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{8.{1}}{}}{165}{pymass.8.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{165}{pymass.8.1}\protected@file@percent }
+\newlabel{86@xvr}{{}{165}}
+\newlabel{86@vr}{{}{165}}
 \newlabel{py:therm-read}{{8.{1}}{165}{Python Code}{pymass.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm\textendash read.py}{165}{lstlisting.8.-139}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{8.{2}}{}}{165}{pymass.8.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{165}{pymass.8.2}}
-\newlabel{87@xvr}{{}{166}{Python Code}{pymass.8.2}{}}
-\newlabel{87@vr}{{}{166}{Python Code}{pymass.8.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm\textendash read.py}{165}{lstlisting.8.-139}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{8.{2}}{}}{165}{pymass.8.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{165}{pymass.8.2}\protected@file@percent }
+\newlabel{87@xvr}{{}{166}}
+\newlabel{87@vr}{{}{166}}
 \newlabel{py:therm-buzzer}{{8.{2}}{166}{Python Code}{pymass.8.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm\textendash buzzer.py}{166}{lstlisting.8.-140}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm\textendash buzzer.py}{166}{lstlisting.8.-140}\protected@file@percent }
 \citation{julia-serial-ports}
-\@writefile{toc}{\contentsline {section}{\numberline {8.7}Interfacing the thermistor from Julia}{167}{section.8.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.1}Interfacing the thermistor}{167}{subsection.8.7.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm\textendash read.jl}{167}{lstlisting.8.-141}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm\textendash read.jl}{167}{lstlisting.8.-142}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm\textendash buzzer.jl}{168}{lstlisting.8.-143}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{168}{section*.123}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.2}Julia Code}{168}{subsection.8.7.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {8.7}Interfacing the thermistor from Julia}{167}{section.8.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.1}Interfacing the thermistor}{167}{subsection.8.7.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm\textendash read.jl}{167}{lstlisting.8.-141}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm\textendash read.jl}{167}{lstlisting.8.-142}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm\textendash buzzer.jl}{168}{lstlisting.8.-143}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{168}{section*.123}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.2}Julia Code}{168}{subsection.8.7.2}\protected@file@percent }
 \newlabel{sec:therm-julia-code}{{8.7.2}{168}{Julia Code}{subsection.8.7.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{8.{1}}{}}{168}{juliamass.8.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{168}{juliamass.8.1}}
-\newlabel{88@xvr}{{}{168}{Julia Code}{juliamass.8.1}{}}
-\newlabel{88@vr}{{}{168}{Julia Code}{juliamass.8.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{8.{1}}{}}{168}{juliamass.8.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{168}{juliamass.8.1}\protected@file@percent }
+\newlabel{88@xvr}{{}{168}}
+\newlabel{88@vr}{{}{168}}
 \newlabel{julia:therm-read}{{8.{1}}{168}{Julia Code}{juliamass.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm\textendash read.jl}{168}{lstlisting.8.-144}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{8.{2}}{}}{169}{juliamass.8.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{169}{juliamass.8.2}}
-\newlabel{89@xvr}{{}{169}{Julia Code}{juliamass.8.2}{}}
-\newlabel{89@vr}{{}{169}{Julia Code}{juliamass.8.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm\textendash read.jl}{168}{lstlisting.8.-144}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{8.{2}}{}}{169}{juliamass.8.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{169}{juliamass.8.2}\protected@file@percent }
+\newlabel{89@xvr}{{}{169}}
+\newlabel{89@vr}{{}{169}}
 \newlabel{julia:therm-buzzer}{{8.{2}}{169}{Julia Code}{juliamass.8.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm\textendash buzzer.jl}{169}{lstlisting.8.-145}}
-\@writefile{toc}{\contentsline {section}{\numberline {8.8}Interfacing the thermistor from OpenModelica}{169}{section.8.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.8.1}Interfacing the thermistor}{169}{subsection.8.8.1}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm\textendash read.mo}{169}{lstlisting.8.-146}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm\textendash read.mo}{170}{lstlisting.8.-147}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm\textendash buzzer.mo}{170}{lstlisting.8.-148}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{171}{section*.124}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {8.8.2}OpenModelica Code}{171}{subsection.8.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm\textendash buzzer.jl}{169}{lstlisting.8.-145}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {8.8}Interfacing the thermistor from OpenModelica}{169}{section.8.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.8.1}Interfacing the thermistor}{169}{subsection.8.8.1}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm\textendash read.mo}{169}{lstlisting.8.-146}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm\textendash read.mo}{170}{lstlisting.8.-147}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm\textendash buzzer.mo}{170}{lstlisting.8.-148}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{171}{section*.124}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {8.8.2}OpenModelica Code}{171}{subsection.8.8.2}\protected@file@percent }
 \newlabel{sec:therm-OpenModelica-code}{{8.8.2}{171}{OpenModelica Code}{subsection.8.8.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{1}}{}}{171}{OpenModelicamass.8.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{171}{OpenModelicamass.8.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{1}}{}}{171}{OpenModelicamass.8.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{171}{OpenModelicamass.8.1}\protected@file@percent }
 \newlabel{OpenModelica:therm-read}{{8.{1}}{171}{OpenModelica Code}{OpenModelicamass.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm\textendash read.mo}{171}{lstlisting.8.-149}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{2}}{}}{172}{OpenModelicamass.8.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{172}{OpenModelicamass.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm\textendash read.mo}{171}{lstlisting.8.-149}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{2}}{}}{172}{OpenModelicamass.8.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{172}{OpenModelicamass.8.2}\protected@file@percent }
 \newlabel{OpenModelica:therm-buzzer}{{8.{2}}{172}{OpenModelica Code}{OpenModelicamass.8.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm\textendash buzzer.mo}{172}{lstlisting.8.-150}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm\textendash buzzer.mo}{172}{lstlisting.8.-150}\protected@file@percent }
 \citation{arduino-pwm}
-\@writefile{toc}{\contentsline {chapter}{\numberline {9}Interfacing a Servomotor}{173}{chapter.9}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {9}Interfacing a Servomotor}{173}{chapter.9}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{sec:servo}{{9}{173}{Interfacing a Servomotor}{chapter.9}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.1}Preliminaries}{173}{section.9.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {9.1}Preliminaries}{173}{section.9.1}\protected@file@percent }
 \newlabel{sec:servo-pril}{{9.1}{173}{Preliminaries}{section.9.1}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.1}{\ignorespaces Connecting servomotor to the shield attached on Arduino Uno\relax }}{174}{figure.caption.125}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9.1}{\ignorespaces Connecting servomotor to the shield attached on Arduino Uno\relax }}{174}{figure.caption.125}\protected@file@percent }
 \newlabel{fig:servo-shield}{{9.1}{174}{Connecting servomotor to the shield attached on \arduino \relax }{figure.caption.125}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {9.1}{\ignorespaces Connecting a typical servomotor to Arduino Uno\ board\relax }}{174}{table.caption.126}}
+\@writefile{lot}{\contentsline {table}{\numberline {9.1}{\ignorespaces Connecting a typical servomotor to Arduino Uno\ board\relax }}{174}{table.caption.126}\protected@file@percent }
 \newlabel{tab:servo-connect}{{9.1}{174}{Connecting a typical servomotor to \arduino \ board\relax }{table.caption.126}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.2}Connecting a servomotor with Arduino Uno\ using a breadboard}{174}{section.9.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.2}{\ignorespaces A servomotor with Arduino Uno\ using a breadboard\relax }}{175}{figure.caption.127}}
+\@writefile{toc}{\contentsline {section}{\numberline {9.2}Connecting a servomotor with Arduino Uno\ using a breadboard}{174}{section.9.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {9.2}{\ignorespaces A servomotor with Arduino Uno\ using a breadboard\relax }}{175}{figure.caption.127}\protected@file@percent }
 \newlabel{fig:servo-bread}{{9.2}{175}{A servomotor with \arduino \ using a breadboard\relax }{figure.caption.127}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.3}Controlling the servomotor through the Arduino IDE}{175}{section.9.3}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.3.1}Controlling the servomotor}{175}{subsection.9.3.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {9.3}Controlling the servomotor through the Arduino IDE}{175}{section.9.3}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.3.1}Controlling the servomotor}{175}{subsection.9.3.1}\protected@file@percent }
 \newlabel{sec:servo-ard}{{9.3.1}{175}{Controlling the servomotor}{subsection.9.3.1}{}}
 \citation{servo-lib}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.3}{\ignorespaces A servomotor and a potentiometer with Arduino Uno\ using a breadboard\relax }}{176}{figure.caption.128}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9.3}{\ignorespaces A servomotor and a potentiometer with Arduino Uno\ using a breadboard\relax }}{176}{figure.caption.128}\protected@file@percent }
 \newlabel{fig:servo-pot-bread}{{9.3}{176}{A servomotor and a potentiometer with \arduino \ using a breadboard\relax }{figure.caption.128}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{176}{lstlisting.9.-151}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{176}{lstlisting.9.-152}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{176}{lstlisting.9.-153}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{177}{lstlisting.9.-154}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash reverse/servo\textendash reverse.ino}{177}{lstlisting.9.-155}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash pot/servo\textendash pot.ino}{177}{lstlisting.9.-156}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{9.{1}}{}}{178}{egmass.9.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.3.2}Arduino Code}{178}{subsection.9.3.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{176}{lstlisting.9.-151}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{176}{lstlisting.9.-152}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{176}{lstlisting.9.-153}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{177}{lstlisting.9.-154}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash reverse/servo\textendash reverse.ino}{177}{lstlisting.9.-155}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash pot/servo\textendash pot.ino}{177}{lstlisting.9.-156}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{9.{1}}{}}{178}{egmass.9.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.3.2}Arduino Code}{178}{subsection.9.3.2}\protected@file@percent }
 \newlabel{sec:servo-arduino-code}{{9.3.2}{178}{Arduino Code}{subsection.9.3.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{1}}{}}{178}{ardmass.9.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{178}{ardmass.9.1}}
-\newlabel{90@xvr}{{}{178}{Arduino Code}{ardmass.9.1}{}}
-\newlabel{90@vr}{{}{178}{Arduino Code}{ardmass.9.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{1}}{}}{178}{ardmass.9.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{178}{ardmass.9.1}\protected@file@percent }
+\newlabel{90@xvr}{{}{178}}
+\newlabel{90@vr}{{}{178}}
 \newlabel{ard:servo-init}{{9.{1}}{178}{Arduino Code}{ardmass.9.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{178}{lstlisting.9.-157}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{2}}{}}{179}{ardmass.9.2}}
-\@writefile{ard}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{179}{ardmass.9.2}}
-\newlabel{91@xvr}{{}{179}{Arduino Code}{ardmass.9.2}{}}
-\newlabel{91@vr}{{}{179}{Arduino Code}{ardmass.9.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash init/servo\textendash init.ino}{178}{lstlisting.9.-157}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{2}}{}}{179}{ardmass.9.2}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{179}{ardmass.9.2}\protected@file@percent }
+\newlabel{91@xvr}{{}{179}}
+\newlabel{91@vr}{{}{179}}
 \newlabel{ard:servo-reverse}{{9.{2}}{179}{Arduino Code}{ardmass.9.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash reverse/servo\textendash reverse.ino}{179}{lstlisting.9.-158}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{3}}{}}{179}{ardmass.9.3}}
-\@writefile{ard}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in increments}{179}{ardmass.9.3}}
-\newlabel{92@xvr}{{}{179}{Arduino Code}{ardmass.9.3}{}}
-\newlabel{92@vr}{{}{179}{Arduino Code}{ardmass.9.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash reverse/servo\textendash reverse.ino}{179}{lstlisting.9.-158}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{3}}{}}{179}{ardmass.9.3}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in increments}{179}{ardmass.9.3}\protected@file@percent }
+\newlabel{92@xvr}{{}{179}}
+\newlabel{92@vr}{{}{179}}
 \newlabel{ard:servo-loop}{{9.{3}}{179}{Arduino Code}{ardmass.9.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash loop/servo\textendash loop.ino}{179}{lstlisting.9.-159}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{4}}{}}{179}{ardmass.9.4}}
-\@writefile{ard}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor through the potentiometer}{179}{ardmass.9.4}}
-\newlabel{93@xvr}{{}{179}{Arduino Code}{ardmass.9.4}{}}
-\newlabel{93@vr}{{}{179}{Arduino Code}{ardmass.9.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash loop/servo\textendash loop.ino}{179}{lstlisting.9.-159}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{9.{4}}{}}{179}{ardmass.9.4}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor through the potentiometer}{179}{ardmass.9.4}\protected@file@percent }
+\newlabel{93@xvr}{{}{179}}
+\newlabel{93@vr}{{}{179}}
 \newlabel{ard:servo-pot}{{9.{4}}{179}{Arduino Code}{ardmass.9.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo\textendash pot/servo\textendash pot.ino}{179}{lstlisting.9.-160}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.4}Controlling the servomotor through Scilab}{180}{section.9.4}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.4.1}Controlling the servomotor}{180}{subsection.9.4.1}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo\textendash pot/servo\textendash pot.ino}{179}{lstlisting.9.-160}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {9.4}Controlling the servomotor through Scilab}{180}{section.9.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.4.1}Controlling the servomotor}{180}{subsection.9.4.1}\protected@file@percent }
 \newlabel{sec:servo-sci}{{9.4.1}{180}{Controlling the servomotor}{subsection.9.4.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash init.sce}{180}{lstlisting.9.-161}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash init.sce}{180}{lstlisting.9.-162}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash reverse.sce}{181}{lstlisting.9.-163}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash pot.sce}{181}{lstlisting.9.-164}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.4.2}Scilab Code}{182}{subsection.9.4.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash init.sce}{180}{lstlisting.9.-161}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash init.sce}{180}{lstlisting.9.-162}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash reverse.sce}{181}{lstlisting.9.-163}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash pot.sce}{181}{lstlisting.9.-164}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.4.2}Scilab Code}{182}{subsection.9.4.2}\protected@file@percent }
 \newlabel{sec:servo-scilab-code}{{9.4.2}{182}{Scilab Code}{subsection.9.4.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{1}}{}}{182}{codemass.9.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{182}{codemass.9.1}}
-\newlabel{94@xvr}{{}{182}{Scilab Code}{codemass.9.1}{}}
-\newlabel{94@vr}{{}{182}{Scilab Code}{codemass.9.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{1}}{}}{182}{codemass.9.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{182}{codemass.9.1}\protected@file@percent }
+\newlabel{94@xvr}{{}{182}}
+\newlabel{94@vr}{{}{182}}
 \newlabel{sci:servo-init}{{9.{1}}{182}{Scilab Code}{codemass.9.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash init.sce}{182}{lstlisting.9.-165}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{2}}{}}{182}{codemass.9.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{182}{codemass.9.2}}
-\newlabel{95@xvr}{{}{182}{Scilab Code}{codemass.9.2}{}}
-\newlabel{95@vr}{{}{182}{Scilab Code}{codemass.9.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash init.sce}{182}{lstlisting.9.-165}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{2}}{}}{182}{codemass.9.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{182}{codemass.9.2}\protected@file@percent }
+\newlabel{95@xvr}{{}{182}}
+\newlabel{95@vr}{{}{182}}
 \newlabel{sci:servo-reverse}{{9.{2}}{182}{Scilab Code}{codemass.9.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash reverse.sce}{182}{lstlisting.9.-166}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{3}}{}}{182}{codemass.9.3}}
-\@writefile{cod}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{182}{codemass.9.3}}
-\newlabel{96@xvr}{{}{182}{Scilab Code}{codemass.9.3}{}}
-\newlabel{96@vr}{{}{182}{Scilab Code}{codemass.9.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash reverse.sce}{182}{lstlisting.9.-166}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{3}}{}}{182}{codemass.9.3}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{182}{codemass.9.3}\protected@file@percent }
+\newlabel{96@xvr}{{}{182}}
+\newlabel{96@vr}{{}{182}}
 \newlabel{sci:servo-loop}{{9.{3}}{182}{Scilab Code}{codemass.9.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash loop.sce}{182}{lstlisting.9.-167}}
-\@writefile{lot}{\contentsline {table}{\numberline {9.2}{\ignorespaces Parameters to rotate the servomotor by $30^\circ $\relax }}{183}{table.caption.130}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash loop.sce}{182}{lstlisting.9.-167}\protected@file@percent }
+\@writefile{lot}{\contentsline {table}{\numberline {9.2}{\ignorespaces Parameters to rotate the servomotor by $30^\circ $\relax }}{183}{table.caption.130}\protected@file@percent }
 \newlabel{tab:servo-init}{{9.2}{183}{Parameters to rotate the servomotor by $30^\circ $\relax }{table.caption.130}{}}
-\newlabel{100@xvr}{{}{183}{Parameters to rotate the servomotor by $30^\circ $\relax }{table.caption.130}{}}
-\newlabel{100@vr}{{}{183}{Parameters to rotate the servomotor by $30^\circ $\relax }{table.caption.130}{}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{4}}{}}{183}{codemass.9.4}}
-\@writefile{cod}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{183}{codemass.9.4}}
-\newlabel{97@xvr}{{}{183}{Scilab Code}{codemass.9.4}{}}
-\newlabel{97@vr}{{}{183}{Scilab Code}{codemass.9.4}{}}
+\newlabel{100@xvr}{{}{183}}
+\newlabel{100@vr}{{}{183}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{9.{4}}{}}{183}{codemass.9.4}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{183}{codemass.9.4}\protected@file@percent }
+\newlabel{97@xvr}{{}{183}}
+\newlabel{97@vr}{{}{183}}
 \newlabel{sci:servo-pot}{{9.{4}}{183}{Scilab Code}{codemass.9.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo\textendash pot.sce}{183}{lstlisting.9.-168}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.5}Controling the servomotor through Xcos}{183}{section.9.5}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo\textendash pot.sce}{183}{lstlisting.9.-168}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {9.5}Controling the servomotor through Xcos}{183}{section.9.5}\protected@file@percent }
 \newlabel{sec:servo-xcos}{{9.5}{183}{Controling the servomotor through Xcos}{section.9.5}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.4}{\ignorespaces Rotating the servomotor by a fixed angle}}{184}{figure.caption.129}}
-\newlabel{99@xvr}{{}{184}{Rotating the servomotor by a fixed angle}{figure.caption.129}{}}
-\newlabel{99@vr}{{}{184}{Rotating the servomotor by a fixed angle}{figure.caption.129}{}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9.4}{\ignorespaces Rotating the servomotor by a fixed angle}}{184}{figure.caption.129}\protected@file@percent }
+\newlabel{99@xvr}{{}{184}}
+\newlabel{99@vr}{{}{184}}
 \newlabel{fig:servo-init}{{9.4}{184}{Rotating the servomotor by a fixed angle}{figure.caption.129}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.5}{\ignorespaces Rotating the servomotor forward and then reverse}}{185}{figure.caption.131}}
-\newlabel{102@xvr}{{}{185}{Rotating the servomotor forward and then reverse}{figure.caption.131}{}}
-\newlabel{102@vr}{{}{185}{Rotating the servomotor forward and then reverse}{figure.caption.131}{}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9.5}{\ignorespaces Rotating the servomotor forward and then reverse}}{185}{figure.caption.131}\protected@file@percent }
+\newlabel{102@xvr}{{}{185}}
+\newlabel{102@vr}{{}{185}}
 \newlabel{fig:servo-reverse}{{9.5}{185}{Rotating the servomotor forward and then reverse}{figure.caption.131}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {9.3}{\ignorespaces Parameters to rotate the servomotor forward and reverse\relax }}{185}{table.caption.132}}
+\@writefile{lot}{\contentsline {table}{\numberline {9.3}{\ignorespaces Parameters to rotate the servomotor forward and reverse\relax }}{185}{table.caption.132}\protected@file@percent }
 \newlabel{tab:servo-reverse}{{9.3}{185}{Parameters to rotate the servomotor forward and reverse\relax }{table.caption.132}{}}
-\newlabel{103@xvr}{{}{185}{Parameters to rotate the servomotor forward and reverse\relax }{table.caption.132}{}}
-\newlabel{103@vr}{{}{185}{Parameters to rotate the servomotor forward and reverse\relax }{table.caption.132}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.6}{\ignorespaces Rotating the servomotor in increments of $20^\circ $}}{186}{figure.caption.133}}
-\newlabel{105@xvr}{{}{186}{Rotating the servomotor in increments of $20^\circ $}{figure.caption.133}{}}
-\newlabel{105@vr}{{}{186}{Rotating the servomotor in increments of $20^\circ $}{figure.caption.133}{}}
+\newlabel{103@xvr}{{}{185}}
+\newlabel{103@vr}{{}{185}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9.6}{\ignorespaces Rotating the servomotor in increments of $20^\circ $}}{186}{figure.caption.133}\protected@file@percent }
+\newlabel{105@xvr}{{}{186}}
+\newlabel{105@vr}{{}{186}}
 \newlabel{fig:servo-loop}{{9.6}{186}{Rotating the servomotor in increments of $20^\circ $}{figure.caption.133}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {9.4}{\ignorespaces Parameters to make the servomotor to sweep the entire range in increments\relax }}{186}{table.caption.134}}
+\@writefile{lot}{\contentsline {table}{\numberline {9.4}{\ignorespaces Parameters to make the servomotor to sweep the entire range in increments\relax }}{186}{table.caption.134}\protected@file@percent }
 \newlabel{tab:servo-loop}{{9.4}{186}{Parameters to make the servomotor to sweep the entire range in increments\relax }{table.caption.134}{}}
-\newlabel{106@xvr}{{}{186}{Parameters to make the servomotor to sweep the entire range in increments\relax }{table.caption.134}{}}
-\newlabel{106@vr}{{}{186}{Parameters to make the servomotor to sweep the entire range in increments\relax }{table.caption.134}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {9.7}{\ignorespaces Rotating the servomotor as suggested by the potentiometer}}{187}{figure.caption.135}}
-\newlabel{108@xvr}{{}{187}{Rotating the servomotor as suggested by the potentiometer}{figure.caption.135}{}}
-\newlabel{108@vr}{{}{187}{Rotating the servomotor as suggested by the potentiometer}{figure.caption.135}{}}
+\newlabel{106@xvr}{{}{186}}
+\newlabel{106@vr}{{}{186}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9.7}{\ignorespaces Rotating the servomotor as suggested by the potentiometer}}{187}{figure.caption.135}\protected@file@percent }
+\newlabel{108@xvr}{{}{187}}
+\newlabel{108@vr}{{}{187}}
 \newlabel{fig:servo-pot}{{9.7}{187}{Rotating the servomotor as suggested by the potentiometer}{figure.caption.135}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {9.5}{\ignorespaces Parameters to rotate the servomotor based on the input from the potentiometer\relax }}{187}{table.caption.136}}
+\@writefile{lot}{\contentsline {table}{\numberline {9.5}{\ignorespaces Parameters to rotate the servomotor based on the input from the potentiometer\relax }}{187}{table.caption.136}\protected@file@percent }
 \newlabel{tab:servo-pot}{{9.5}{187}{Parameters to rotate the servomotor based on the input from the potentiometer\relax }{table.caption.136}{}}
-\newlabel{109@xvr}{{}{187}{Parameters to rotate the servomotor based on the input from the potentiometer\relax }{table.caption.136}{}}
-\newlabel{109@vr}{{}{187}{Parameters to rotate the servomotor based on the input from the potentiometer\relax }{table.caption.136}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.6}Controlling the servomotor through Python}{188}{section.9.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.6.1}Controlling the servomotor}{188}{subsection.9.6.1}}
+\newlabel{109@xvr}{{}{187}}
+\newlabel{109@vr}{{}{187}}
+\@writefile{toc}{\contentsline {section}{\numberline {9.6}Controlling the servomotor through Python}{188}{section.9.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.6.1}Controlling the servomotor}{188}{subsection.9.6.1}\protected@file@percent }
 \newlabel{sec:servo-py}{{9.6.1}{188}{Controlling the servomotor}{subsection.9.6.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash init.py}{188}{lstlisting.9.-169}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash init.py}{188}{lstlisting.9.-170}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash reverse.py}{188}{lstlisting.9.-171}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash pot.py}{189}{lstlisting.9.-172}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.6.2}Python Code}{189}{subsection.9.6.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash init.py}{188}{lstlisting.9.-169}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash init.py}{188}{lstlisting.9.-170}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash reverse.py}{188}{lstlisting.9.-171}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash pot.py}{189}{lstlisting.9.-172}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.6.2}Python Code}{189}{subsection.9.6.2}\protected@file@percent }
 \newlabel{sec:servo-python-code}{{9.6.2}{189}{Python Code}{subsection.9.6.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{1}}{}}{189}{pymass.9.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{189}{pymass.9.1}}
-\newlabel{110@xvr}{{}{189}{Python Code}{pymass.9.1}{}}
-\newlabel{110@vr}{{}{189}{Python Code}{pymass.9.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{1}}{}}{189}{pymass.9.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{189}{pymass.9.1}\protected@file@percent }
+\newlabel{110@xvr}{{}{189}}
+\newlabel{110@vr}{{}{189}}
 \newlabel{py:servo-init}{{9.{1}}{189}{Python Code}{pymass.9.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash init.py}{189}{lstlisting.9.-173}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{2}}{}}{190}{pymass.9.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{190}{pymass.9.2}}
-\newlabel{111@xvr}{{}{190}{Python Code}{pymass.9.2}{}}
-\newlabel{111@vr}{{}{190}{Python Code}{pymass.9.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash init.py}{189}{lstlisting.9.-173}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{2}}{}}{190}{pymass.9.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{190}{pymass.9.2}\protected@file@percent }
+\newlabel{111@xvr}{{}{190}}
+\newlabel{111@vr}{{}{190}}
 \newlabel{py:servo-reverse}{{9.{2}}{190}{Python Code}{pymass.9.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash reverse.py}{190}{lstlisting.9.-174}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{3}}{}}{191}{pymass.9.3}}
-\@writefile{pyd}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{191}{pymass.9.3}}
-\newlabel{112@xvr}{{}{191}{Python Code}{pymass.9.3}{}}
-\newlabel{112@vr}{{}{191}{Python Code}{pymass.9.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash reverse.py}{190}{lstlisting.9.-174}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{3}}{}}{191}{pymass.9.3}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{191}{pymass.9.3}\protected@file@percent }
+\newlabel{112@xvr}{{}{191}}
+\newlabel{112@vr}{{}{191}}
 \newlabel{py:servo-loop}{{9.{3}}{191}{Python Code}{pymass.9.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash loop.py}{191}{lstlisting.9.-175}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{4}}{}}{192}{pymass.9.4}}
-\@writefile{pyd}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{192}{pymass.9.4}}
-\newlabel{113@xvr}{{}{192}{Python Code}{pymass.9.4}{}}
-\newlabel{113@vr}{{}{192}{Python Code}{pymass.9.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash loop.py}{191}{lstlisting.9.-175}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{9.{4}}{}}{192}{pymass.9.4}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{192}{pymass.9.4}\protected@file@percent }
+\newlabel{113@xvr}{{}{192}}
+\newlabel{113@vr}{{}{192}}
 \newlabel{py:servo-pot}{{9.{4}}{192}{Python Code}{pymass.9.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo\textendash pot.py}{192}{lstlisting.9.-176}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.7}Controlling the servomotor through Julia}{193}{section.9.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.7.1}Controlling the servomotor}{193}{subsection.9.7.1}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo\textendash pot.py}{192}{lstlisting.9.-176}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {9.7}Controlling the servomotor through Julia}{193}{section.9.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.7.1}Controlling the servomotor}{193}{subsection.9.7.1}\protected@file@percent }
 \newlabel{sec:servo-julia}{{9.7.1}{193}{Controlling the servomotor}{subsection.9.7.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash init.jl}{193}{lstlisting.9.-177}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash init.jl}{193}{lstlisting.9.-178}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash reverse.jl}{194}{lstlisting.9.-179}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash pot.jl}{194}{lstlisting.9.-180}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.7.2}Julia Code}{195}{subsection.9.7.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash init.jl}{193}{lstlisting.9.-177}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash init.jl}{193}{lstlisting.9.-178}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash reverse.jl}{194}{lstlisting.9.-179}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash pot.jl}{194}{lstlisting.9.-180}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.7.2}Julia Code}{195}{subsection.9.7.2}\protected@file@percent }
 \newlabel{sec:servo-julia-code}{{9.7.2}{195}{Julia Code}{subsection.9.7.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{1}}{}}{195}{juliamass.9.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{195}{juliamass.9.1}}
-\newlabel{114@xvr}{{}{195}{Julia Code}{juliamass.9.1}{}}
-\newlabel{114@vr}{{}{195}{Julia Code}{juliamass.9.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{1}}{}}{195}{juliamass.9.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{195}{juliamass.9.1}\protected@file@percent }
+\newlabel{114@xvr}{{}{195}}
+\newlabel{114@vr}{{}{195}}
 \newlabel{julia:servo-init}{{9.{1}}{195}{Julia Code}{juliamass.9.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash init.jl}{195}{lstlisting.9.-181}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{2}}{}}{195}{juliamass.9.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{195}{juliamass.9.2}}
-\newlabel{115@xvr}{{}{195}{Julia Code}{juliamass.9.2}{}}
-\newlabel{115@vr}{{}{195}{Julia Code}{juliamass.9.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash init.jl}{195}{lstlisting.9.-181}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{2}}{}}{195}{juliamass.9.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{195}{juliamass.9.2}\protected@file@percent }
+\newlabel{115@xvr}{{}{195}}
+\newlabel{115@vr}{{}{195}}
 \newlabel{julia:servo-reverse}{{9.{2}}{195}{Julia Code}{juliamass.9.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash reverse.jl}{195}{lstlisting.9.-182}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{3}}{}}{195}{juliamass.9.3}}
-\@writefile{juliad}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{195}{juliamass.9.3}}
-\newlabel{116@xvr}{{}{195}{Julia Code}{juliamass.9.3}{}}
-\newlabel{116@vr}{{}{195}{Julia Code}{juliamass.9.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash reverse.jl}{195}{lstlisting.9.-182}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{3}}{}}{195}{juliamass.9.3}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{195}{juliamass.9.3}\protected@file@percent }
+\newlabel{116@xvr}{{}{195}}
+\newlabel{116@vr}{{}{195}}
 \newlabel{julia:servo-loop}{{9.{3}}{195}{Julia Code}{juliamass.9.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash loop.jl}{195}{lstlisting.9.-183}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{4}}{}}{196}{juliamass.9.4}}
-\@writefile{juliad}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{196}{juliamass.9.4}}
-\newlabel{117@xvr}{{}{196}{Julia Code}{juliamass.9.4}{}}
-\newlabel{117@vr}{{}{196}{Julia Code}{juliamass.9.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash loop.jl}{195}{lstlisting.9.-183}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{9.{4}}{}}{196}{juliamass.9.4}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{196}{juliamass.9.4}\protected@file@percent }
+\newlabel{117@xvr}{{}{196}}
+\newlabel{117@vr}{{}{196}}
 \newlabel{julia:servo-pot}{{9.{4}}{196}{Julia Code}{juliamass.9.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo\textendash pot.jl}{196}{lstlisting.9.-184}}
-\@writefile{toc}{\contentsline {section}{\numberline {9.8}Controlling the servomotor through OpenModelica}{196}{section.9.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.8.1}Controlling the servomotor}{196}{subsection.9.8.1}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo\textendash pot.jl}{196}{lstlisting.9.-184}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {9.8}Controlling the servomotor through OpenModelica}{196}{section.9.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.8.1}Controlling the servomotor}{196}{subsection.9.8.1}\protected@file@percent }
 \newlabel{sec:servo-OpenModelica}{{9.8.1}{196}{Controlling the servomotor}{subsection.9.8.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash init.mo}{196}{lstlisting.9.-185}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash init.mo}{197}{lstlisting.9.-186}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash reverse.mo}{197}{lstlisting.9.-187}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash pot.mo}{197}{lstlisting.9.-188}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {9.8.2}OpenModelica Code}{198}{subsection.9.8.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash init.mo}{196}{lstlisting.9.-185}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash init.mo}{197}{lstlisting.9.-186}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash reverse.mo}{197}{lstlisting.9.-187}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash pot.mo}{197}{lstlisting.9.-188}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {9.8.2}OpenModelica Code}{198}{subsection.9.8.2}\protected@file@percent }
 \newlabel{sec:servo-OpenModelica-code}{{9.8.2}{198}{OpenModelica Code}{subsection.9.8.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{1}}{}}{198}{OpenModelicamass.9.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{198}{OpenModelicamass.9.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{1}}{}}{198}{OpenModelicamass.9.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{198}{OpenModelicamass.9.1}\protected@file@percent }
 \newlabel{OpenModelica:servo-init}{{9.{1}}{198}{OpenModelica Code}{OpenModelicamass.9.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash init.mo}{198}{lstlisting.9.-189}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{2}}{}}{199}{OpenModelicamass.9.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{199}{OpenModelicamass.9.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash init.mo}{198}{lstlisting.9.-189}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{2}}{}}{199}{OpenModelicamass.9.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{199}{OpenModelicamass.9.2}\protected@file@percent }
 \newlabel{OpenModelica:servo-reverse}{{9.{2}}{199}{OpenModelica Code}{OpenModelicamass.9.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash reverse.mo}{199}{lstlisting.9.-190}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{3}}{}}{199}{OpenModelicamass.9.3}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{199}{OpenModelicamass.9.3}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash reverse.mo}{199}{lstlisting.9.-190}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{3}}{}}{199}{OpenModelicamass.9.3}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{199}{OpenModelicamass.9.3}\protected@file@percent }
 \newlabel{OpenModelica:servo-loop}{{9.{3}}{199}{OpenModelica Code}{OpenModelicamass.9.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash loop.mo}{199}{lstlisting.9.-191}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{4}}{}}{200}{OpenModelicamass.9.4}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{200}{OpenModelicamass.9.4}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash loop.mo}{199}{lstlisting.9.-191}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{4}}{}}{200}{OpenModelicamass.9.4}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{200}{OpenModelicamass.9.4}\protected@file@percent }
 \newlabel{OpenModelica:servo-pot}{{9.{4}}{200}{OpenModelica Code}{OpenModelicamass.9.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo\textendash pot.mo}{200}{lstlisting.9.-192}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo\textendash pot.mo}{200}{lstlisting.9.-192}\protected@file@percent }
 \citation{arduino-pwm}
-\@writefile{toc}{\contentsline {chapter}{\numberline {10}Interfacing a DC Motor}{203}{chapter.10}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {10}Interfacing a DC Motor}{203}{chapter.10}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{dcmotor}{{10}{203}{Interfacing a DC Motor}{chapter.10}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.1}Preliminaries}{203}{section.10.1}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.1}{\ignorespaces L293D motor driver board\relax }}{204}{figure.caption.137}}
+\@writefile{toc}{\contentsline {section}{\numberline {10.1}Preliminaries}{203}{section.10.1}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {10.1}{\ignorespaces L293D motor driver board\relax }}{204}{figure.caption.137}\protected@file@percent }
 \newlabel{fig:motordriverboard}{{10.1}{204}{L293D motor driver board\relax }{figure.caption.137}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {10.1}{\ignorespaces Values in the Scilab\ command for different H-Bridge circuits\relax }}{204}{table.caption.138}}
+\@writefile{lot}{\contentsline {table}{\numberline {10.1}{\ignorespaces Values in the Scilab\ command for different H-Bridge circuits\relax }}{204}{table.caption.138}\protected@file@percent }
 \newlabel{table:convention}{{10.1}{204}{Values in the \scilab \ command for different H-Bridge circuits\relax }{table.caption.138}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.2}{\ignorespaces PWM pins on an Arduino Uno\ board\relax }}{205}{figure.caption.139}}
+\@writefile{lof}{\contentsline {figure}{\numberline {10.2}{\ignorespaces PWM pins on an Arduino Uno\ board\relax }}{205}{figure.caption.139}\protected@file@percent }
 \newlabel{fig:uno-pwm}{{10.2}{205}{PWM pins on an \arduino \ board\relax }{figure.caption.139}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.2}Controlling the DC motor from Arduino}{205}{section.10.2}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.2.1}Controlling the DC motor}{205}{subsection.10.2.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {10.2}Controlling the DC motor from Arduino}{205}{section.10.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.2.1}Controlling the DC motor}{205}{subsection.10.2.1}\protected@file@percent }
 \newlabel{sec:dcm-ard}{{10.2.1}{205}{Controlling the DC motor}{subsection.10.2.1}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.3}{\ignorespaces A schematic of DC motor connections\relax }}{206}{figure.caption.140}}
+\@writefile{lof}{\contentsline {figure}{\numberline {10.3}{\ignorespaces A schematic of DC motor connections\relax }}{206}{figure.caption.140}\protected@file@percent }
 \newlabel{fig:dcm-schematic}{{10.3}{206}{A schematic of DC motor connections\relax }{figure.caption.140}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.4}{\ignorespaces How to connect the DC motor to the Arduino Uno\ board\relax }}{206}{figure.caption.141}}
+\@writefile{lof}{\contentsline {figure}{\numberline {10.4}{\ignorespaces How to connect the DC motor to the Arduino Uno\ board\relax }}{206}{figure.caption.141}\protected@file@percent }
 \newlabel{fig:dcmotorconn}{{10.4}{206}{How to connect the DC motor to the \arduino \ board\relax }{figure.caption.141}{}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{207}{section*.142}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{207}{lstlisting.10.-193}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{207}{lstlisting.10.-194}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{207}{lstlisting.10.-195}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash both/dcmotor\textendash both.ino}{207}{lstlisting.10.-196}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash both/dcmotor\textendash both.ino}{207}{lstlisting.10.-197}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{10.{1}}{}}{208}{egmass.10.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.2.2}Arduino Code}{208}{subsection.10.2.2}}
+\@writefile{toc}{\contentsline {paragraph}{Note:}{207}{section*.142}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{207}{lstlisting.10.-193}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{207}{lstlisting.10.-194}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{207}{lstlisting.10.-195}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash both/dcmotor\textendash both.ino}{207}{lstlisting.10.-196}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash both/dcmotor\textendash both.ino}{207}{lstlisting.10.-197}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{10.{1}}{}}{208}{egmass.10.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.2.2}Arduino Code}{208}{subsection.10.2.2}\protected@file@percent }
 \newlabel{sec:dcmotor-arduino-code}{{10.2.2}{208}{Arduino Code}{subsection.10.2.2}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{10.{1}}{}}{208}{ardmass.10.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{208}{ardmass.10.1}}
-\newlabel{118@xvr}{{}{208}{Arduino Code}{ardmass.10.1}{}}
-\newlabel{118@vr}{{}{208}{Arduino Code}{ardmass.10.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{10.{1}}{}}{208}{ardmass.10.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{208}{ardmass.10.1}\protected@file@percent }
+\newlabel{118@xvr}{{}{208}}
+\newlabel{118@vr}{{}{208}}
 \newlabel{ard:dcmotor-clock}{{10.{1}}{208}{Arduino Code}{ardmass.10.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{208}{lstlisting.10.-198}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{10.{2}}{}}{208}{ardmass.10.2}}
-\@writefile{ard}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{208}{ardmass.10.2}}
-\newlabel{119@xvr}{{}{208}{Arduino Code}{ardmass.10.2}{}}
-\newlabel{119@vr}{{}{208}{Arduino Code}{ardmass.10.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash clock/dcmotor\textendash clock.ino}{208}{lstlisting.10.-198}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{10.{2}}{}}{208}{ardmass.10.2}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{208}{ardmass.10.2}\protected@file@percent }
+\newlabel{119@xvr}{{}{208}}
+\newlabel{119@vr}{{}{208}}
 \newlabel{ard:dcmotor-both}{{10.{2}}{208}{Arduino Code}{ardmass.10.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash both/dcmotor\textendash both.ino}{209}{lstlisting.10.-199}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{10.{3}}{}}{209}{ardmass.10.3}}
-\@writefile{ard}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{209}{ardmass.10.3}}
-\newlabel{120@xvr}{{}{209}{Arduino Code}{ardmass.10.3}{}}
-\newlabel{120@vr}{{}{209}{Arduino Code}{ardmass.10.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash both/dcmotor\textendash both.ino}{209}{lstlisting.10.-199}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{10.{3}}{}}{209}{ardmass.10.3}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{209}{ardmass.10.3}\protected@file@percent }
+\newlabel{120@xvr}{{}{209}}
+\newlabel{120@vr}{{}{209}}
 \newlabel{ard:dcmotor-loop}{{10.{3}}{209}{Arduino Code}{ardmass.10.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor\textendash loop/dcmotor\textendash loop.ino}{209}{lstlisting.10.-200}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.3}Controlling the DC motor from Scilab}{210}{section.10.3}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor\textendash loop/dcmotor\textendash loop.ino}{209}{lstlisting.10.-200}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {10.3}Controlling the DC motor from Scilab}{210}{section.10.3}\protected@file@percent }
 \newlabel{sec:dcm-sci}{{10.3}{210}{Controlling the DC motor from Scilab}{section.10.3}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.3.1}Controlling the DC motor}{210}{subsection.10.3.1}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{210}{section*.143}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{210}{lstlisting.10.-202}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{211}{lstlisting.10.-204}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{211}{lstlisting.10.-205}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{211}{lstlisting.10.-206}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{211}{section*.144}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash both.sce}{211}{lstlisting.10.-207}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash both.sce}{212}{lstlisting.10.-208}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{10.{2}}{}}{212}{egmass.10.2}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.3.2}Scilab Code}{212}{subsection.10.3.2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.3.1}Controlling the DC motor}{210}{subsection.10.3.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{210}{section*.143}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{210}{lstlisting.10.-202}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{211}{lstlisting.10.-204}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{211}{lstlisting.10.-205}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{211}{lstlisting.10.-206}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{211}{section*.144}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash both.sce}{211}{lstlisting.10.-207}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash both.sce}{212}{lstlisting.10.-208}\protected@file@percent }
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{10.{2}}{}}{212}{egmass.10.2}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.3.2}Scilab Code}{212}{subsection.10.3.2}\protected@file@percent }
 \newlabel{sec:dcmotor-scilab-code}{{10.3.2}{212}{Scilab Code}{subsection.10.3.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{10.{1}}{}}{212}{codemass.10.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{212}{codemass.10.1}}
-\newlabel{121@xvr}{{}{212}{Scilab Code}{codemass.10.1}{}}
-\newlabel{121@vr}{{}{212}{Scilab Code}{codemass.10.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{10.{1}}{}}{212}{codemass.10.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{212}{codemass.10.1}\protected@file@percent }
+\newlabel{121@xvr}{{}{212}}
+\newlabel{121@vr}{{}{212}}
 \newlabel{sci:dcmotor-clock}{{10.{1}}{212}{Scilab Code}{codemass.10.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{212}{lstlisting.10.-209}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{10.{2}}{}}{212}{codemass.10.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{212}{codemass.10.2}}
-\newlabel{122@xvr}{{}{212}{Scilab Code}{codemass.10.2}{}}
-\newlabel{122@vr}{{}{212}{Scilab Code}{codemass.10.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash clock.sce}{212}{lstlisting.10.-209}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{10.{2}}{}}{212}{codemass.10.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{212}{codemass.10.2}\protected@file@percent }
+\newlabel{122@xvr}{{}{212}}
+\newlabel{122@vr}{{}{212}}
 \newlabel{sci:dcmotor-both}{{10.{2}}{212}{Scilab Code}{codemass.10.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash both.sce}{213}{lstlisting.10.-210}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{10.{3}}{}}{213}{codemass.10.3}}
-\@writefile{cod}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{213}{codemass.10.3}}
-\newlabel{123@xvr}{{}{213}{Scilab Code}{codemass.10.3}{}}
-\newlabel{123@vr}{{}{213}{Scilab Code}{codemass.10.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash both.sce}{213}{lstlisting.10.-210}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{10.{3}}{}}{213}{codemass.10.3}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{213}{codemass.10.3}\protected@file@percent }
+\newlabel{123@xvr}{{}{213}}
+\newlabel{123@vr}{{}{213}}
 \newlabel{sci:dcmotor-loop}{{10.{3}}{213}{Scilab Code}{codemass.10.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor\textendash loop.sce}{213}{lstlisting.10.-211}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.4}Controlling the DC motor from Xcos}{213}{section.10.4}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.5}{\ignorespaces Control of DC motor for a specified time from Xcos}}{214}{figure.caption.145}}
-\newlabel{125@xvr}{{}{214}{Control of DC motor for a specified time from Xcos}{figure.caption.145}{}}
-\newlabel{125@vr}{{}{214}{Control of DC motor for a specified time from Xcos}{figure.caption.145}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor\textendash loop.sce}{213}{lstlisting.10.-211}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {10.4}Controlling the DC motor from Xcos}{213}{section.10.4}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {10.5}{\ignorespaces Control of DC motor for a specified time from Xcos}}{214}{figure.caption.145}\protected@file@percent }
+\newlabel{125@xvr}{{}{214}}
+\newlabel{125@vr}{{}{214}}
 \newlabel{fig:dcmotor-clock}{{10.5}{214}{Control of DC motor for a specified time from Xcos}{figure.caption.145}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {10.2}{\ignorespaces Xcos parameters to drive the DC motor for a specified time\relax }}{214}{table.caption.146}}
+\@writefile{lot}{\contentsline {table}{\numberline {10.2}{\ignorespaces Xcos parameters to drive the DC motor for a specified time\relax }}{214}{table.caption.146}\protected@file@percent }
 \newlabel{tab:dcmotor-clock}{{10.2}{214}{Xcos parameters to drive the DC motor for a specified time\relax }{table.caption.146}{}}
-\newlabel{126@xvr}{{}{214}{Xcos parameters to drive the DC motor for a specified time\relax }{table.caption.146}{}}
-\newlabel{126@vr}{{}{214}{Xcos parameters to drive the DC motor for a specified time\relax }{table.caption.146}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.6}{\ignorespaces Xcos control of the DC motor in forward and reverse directions}}{215}{figure.caption.147}}
-\newlabel{128@xvr}{{}{215}{Xcos control of the DC motor in forward and reverse directions}{figure.caption.147}{}}
-\newlabel{128@vr}{{}{215}{Xcos control of the DC motor in forward and reverse directions}{figure.caption.147}{}}
+\newlabel{126@xvr}{{}{214}}
+\newlabel{126@vr}{{}{214}}
+\@writefile{lof}{\contentsline {figure}{\numberline {10.6}{\ignorespaces Xcos control of the DC motor in forward and reverse directions}}{215}{figure.caption.147}\protected@file@percent }
+\newlabel{128@xvr}{{}{215}}
+\newlabel{128@vr}{{}{215}}
 \newlabel{fig:dcmotor-both}{{10.6}{215}{Xcos control of the DC motor in forward and reverse directions}{figure.caption.147}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {10.3}{\ignorespaces Xcos parameters to drive the DC motor in forward and reverse directions\relax }}{215}{table.caption.148}}
+\@writefile{lot}{\contentsline {table}{\numberline {10.3}{\ignorespaces Xcos parameters to drive the DC motor in forward and reverse directions\relax }}{215}{table.caption.148}\protected@file@percent }
 \newlabel{tab:dcmotor-both}{{10.3}{215}{Xcos parameters to drive the DC motor in forward and reverse directions\relax }{table.caption.148}{}}
-\newlabel{129@xvr}{{}{215}{Xcos parameters to drive the DC motor in forward and reverse directions\relax }{table.caption.148}{}}
-\newlabel{129@vr}{{}{215}{Xcos parameters to drive the DC motor in forward and reverse directions\relax }{table.caption.148}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {10.7}{\ignorespaces Xcos control of the DC motor in both directions in a loop}}{216}{figure.caption.149}}
-\newlabel{131@xvr}{{}{216}{Xcos control of the DC motor in both directions in a loop}{figure.caption.149}{}}
-\newlabel{131@vr}{{}{216}{Xcos control of the DC motor in both directions in a loop}{figure.caption.149}{}}
+\newlabel{129@xvr}{{}{215}}
+\newlabel{129@vr}{{}{215}}
+\@writefile{lof}{\contentsline {figure}{\numberline {10.7}{\ignorespaces Xcos control of the DC motor in both directions in a loop}}{216}{figure.caption.149}\protected@file@percent }
+\newlabel{131@xvr}{{}{216}}
+\newlabel{131@vr}{{}{216}}
 \newlabel{fig:dcmotor-loop}{{10.7}{216}{Xcos control of the DC motor in both directions in a loop}{figure.caption.149}{}}
-\@writefile{thm}{\contentsline {egmass}{{Exercise}{10.{3}}{}}{216}{egmass.10.3}}
-\@writefile{lot}{\contentsline {table}{\numberline {10.4}{\ignorespaces Xcos parameters to drive the DC motor in a loop\relax }}{217}{table.caption.150}}
+\@writefile{thm}{\contentsline {egmass}{{Exercise}{10.{3}}{}}{216}{egmass.10.3}\protected@file@percent }
+\@writefile{lot}{\contentsline {table}{\numberline {10.4}{\ignorespaces Xcos parameters to drive the DC motor in a loop\relax }}{217}{table.caption.150}\protected@file@percent }
 \newlabel{tab:dcmotor-loop}{{10.4}{217}{Xcos parameters to drive the DC motor in a loop\relax }{table.caption.150}{}}
-\newlabel{132@xvr}{{}{217}{Xcos parameters to drive the DC motor in a loop\relax }{table.caption.150}{}}
-\newlabel{132@vr}{{}{217}{Xcos parameters to drive the DC motor in a loop\relax }{table.caption.150}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.5}Controlling the DC motor from Python}{217}{section.10.5}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.5.1}Controlling the DC motor}{217}{subsection.10.5.1}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{217}{section*.151}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-213}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-215}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-216}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-217}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{219}{section*.152}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash both.py}{219}{lstlisting.10.-218}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash both.py}{219}{lstlisting.10.-219}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.5.2}Python Code}{219}{subsection.10.5.2}}
+\newlabel{132@xvr}{{}{217}}
+\newlabel{132@vr}{{}{217}}
+\@writefile{toc}{\contentsline {section}{\numberline {10.5}Controlling the DC motor from Python}{217}{section.10.5}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.5.1}Controlling the DC motor}{217}{subsection.10.5.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{217}{section*.151}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-213}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-215}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-216}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash clock.py}{218}{lstlisting.10.-217}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{219}{section*.152}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash both.py}{219}{lstlisting.10.-218}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash both.py}{219}{lstlisting.10.-219}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.5.2}Python Code}{219}{subsection.10.5.2}\protected@file@percent }
 \newlabel{sec:dcmotor-python-code}{{10.5.2}{219}{Python Code}{subsection.10.5.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{10.{1}}{}}{219}{pymass.10.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{219}{pymass.10.1}}
-\newlabel{133@xvr}{{}{219}{Python Code}{pymass.10.1}{}}
-\newlabel{133@vr}{{}{219}{Python Code}{pymass.10.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{10.{1}}{}}{219}{pymass.10.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{219}{pymass.10.1}\protected@file@percent }
+\newlabel{133@xvr}{{}{219}}
+\newlabel{133@vr}{{}{219}}
 \newlabel{py:dcmotor-clock}{{10.{1}}{219}{Python Code}{pymass.10.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash clock.py}{219}{lstlisting.10.-220}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{10.{2}}{}}{220}{pymass.10.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{220}{pymass.10.2}}
-\newlabel{134@xvr}{{}{220}{Python Code}{pymass.10.2}{}}
-\newlabel{134@vr}{{}{220}{Python Code}{pymass.10.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash clock.py}{219}{lstlisting.10.-220}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{10.{2}}{}}{220}{pymass.10.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{220}{pymass.10.2}\protected@file@percent }
+\newlabel{134@xvr}{{}{220}}
+\newlabel{134@vr}{{}{220}}
 \newlabel{py:dcmotor-both}{{10.{2}}{220}{Python Code}{pymass.10.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash both.py}{220}{lstlisting.10.-221}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{10.{3}}{}}{221}{pymass.10.3}}
-\@writefile{pyd}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{221}{pymass.10.3}}
-\newlabel{135@xvr}{{}{221}{Python Code}{pymass.10.3}{}}
-\newlabel{135@vr}{{}{221}{Python Code}{pymass.10.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash both.py}{220}{lstlisting.10.-221}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{10.{3}}{}}{221}{pymass.10.3}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{221}{pymass.10.3}\protected@file@percent }
+\newlabel{135@xvr}{{}{221}}
+\newlabel{135@vr}{{}{221}}
 \newlabel{py:dcmotor-loop}{{10.{3}}{221}{Python Code}{pymass.10.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor\textendash loop.py}{221}{lstlisting.10.-222}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.6}Controlling the DC motor from Julia}{222}{section.10.6}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.6.1}Controlling the DC motor}{222}{subsection.10.6.1}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{222}{section*.153}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{223}{lstlisting.10.-224}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{223}{lstlisting.10.-226}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{223}{lstlisting.10.-227}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{224}{lstlisting.10.-228}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{224}{section*.154}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash both.jl}{224}{lstlisting.10.-229}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash both.jl}{224}{lstlisting.10.-230}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.6.2}Julia Code}{225}{subsection.10.6.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor\textendash loop.py}{221}{lstlisting.10.-222}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {10.6}Controlling the DC motor from Julia}{222}{section.10.6}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.6.1}Controlling the DC motor}{222}{subsection.10.6.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{222}{section*.153}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{223}{lstlisting.10.-224}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{223}{lstlisting.10.-226}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{223}{lstlisting.10.-227}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{224}{lstlisting.10.-228}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{224}{section*.154}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash both.jl}{224}{lstlisting.10.-229}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash both.jl}{224}{lstlisting.10.-230}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.6.2}Julia Code}{225}{subsection.10.6.2}\protected@file@percent }
 \newlabel{sec:dcmotor-julia-code}{{10.6.2}{225}{Julia Code}{subsection.10.6.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{10.{1}}{}}{225}{juliamass.10.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{225}{juliamass.10.1}}
-\newlabel{136@xvr}{{}{225}{Julia Code}{juliamass.10.1}{}}
-\newlabel{136@vr}{{}{225}{Julia Code}{juliamass.10.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{10.{1}}{}}{225}{juliamass.10.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{225}{juliamass.10.1}\protected@file@percent }
+\newlabel{136@xvr}{{}{225}}
+\newlabel{136@vr}{{}{225}}
 \newlabel{julia:dcmotor-clock}{{10.{1}}{225}{Julia Code}{juliamass.10.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{225}{lstlisting.10.-231}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{10.{2}}{}}{225}{juliamass.10.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{225}{juliamass.10.2}}
-\newlabel{137@xvr}{{}{225}{Julia Code}{juliamass.10.2}{}}
-\newlabel{137@vr}{{}{225}{Julia Code}{juliamass.10.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash clock.jl}{225}{lstlisting.10.-231}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{10.{2}}{}}{225}{juliamass.10.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{225}{juliamass.10.2}\protected@file@percent }
+\newlabel{137@xvr}{{}{225}}
+\newlabel{137@vr}{{}{225}}
 \newlabel{julia:dcmotor-both}{{10.{2}}{225}{Julia Code}{juliamass.10.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash both.jl}{225}{lstlisting.10.-232}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{10.{3}}{}}{225}{juliamass.10.3}}
-\@writefile{juliad}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{225}{juliamass.10.3}}
-\newlabel{138@xvr}{{}{225}{Julia Code}{juliamass.10.3}{}}
-\newlabel{138@vr}{{}{225}{Julia Code}{juliamass.10.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash both.jl}{225}{lstlisting.10.-232}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{10.{3}}{}}{225}{juliamass.10.3}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{225}{juliamass.10.3}\protected@file@percent }
+\newlabel{138@xvr}{{}{225}}
+\newlabel{138@vr}{{}{225}}
 \newlabel{julia:dcmotor-loop}{{10.{3}}{225}{Julia Code}{juliamass.10.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor\textendash loop.jl}{225}{lstlisting.10.-233}}
-\@writefile{toc}{\contentsline {section}{\numberline {10.7}Controlling the DC motor from OpenModelica}{226}{section.10.7}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.7.1}Controlling the DC motor}{226}{subsection.10.7.1}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{226}{section*.155}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{226}{lstlisting.10.-235}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{227}{lstlisting.10.-237}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{227}{lstlisting.10.-238}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{227}{lstlisting.10.-239}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{227}{section*.156}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash both.mo}{228}{lstlisting.10.-240}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash both.mo}{228}{lstlisting.10.-241}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {10.7.2}OpenModelica Code}{228}{subsection.10.7.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor\textendash loop.jl}{225}{lstlisting.10.-233}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {10.7}Controlling the DC motor from OpenModelica}{226}{section.10.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.7.1}Controlling the DC motor}{226}{subsection.10.7.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{226}{section*.155}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{226}{lstlisting.10.-235}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{227}{lstlisting.10.-237}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{227}{lstlisting.10.-238}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{227}{lstlisting.10.-239}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note:}{227}{section*.156}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash both.mo}{228}{lstlisting.10.-240}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash both.mo}{228}{lstlisting.10.-241}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {10.7.2}OpenModelica Code}{228}{subsection.10.7.2}\protected@file@percent }
 \newlabel{sec:dcmotor-OpenModelica-code}{{10.7.2}{228}{OpenModelica Code}{subsection.10.7.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{1}}{}}{228}{OpenModelicamass.10.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{228}{OpenModelicamass.10.1}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{1}}{}}{228}{OpenModelicamass.10.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{228}{OpenModelicamass.10.1}\protected@file@percent }
 \newlabel{OpenModelica:dcmotor-clock}{{10.{1}}{228}{OpenModelica Code}{OpenModelicamass.10.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{228}{lstlisting.10.-242}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{2}}{}}{229}{OpenModelicamass.10.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{229}{OpenModelicamass.10.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash clock.mo}{228}{lstlisting.10.-242}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{2}}{}}{229}{OpenModelicamass.10.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{229}{OpenModelicamass.10.2}\protected@file@percent }
 \newlabel{OpenModelica:dcmotor-both}{{10.{2}}{229}{OpenModelica Code}{OpenModelicamass.10.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash both.mo}{229}{lstlisting.10.-243}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{3}}{}}{229}{OpenModelicamass.10.3}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{229}{OpenModelicamass.10.3}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash both.mo}{229}{lstlisting.10.-243}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{3}}{}}{229}{OpenModelicamass.10.3}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{229}{OpenModelicamass.10.3}\protected@file@percent }
 \newlabel{OpenModelica:dcmotor-loop}{{10.{3}}{229}{OpenModelica Code}{OpenModelicamass.10.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor\textendash loop.mo}{229}{lstlisting.10.-244}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor\textendash loop.mo}{229}{lstlisting.10.-244}\protected@file@percent }
 \citation{modbus}
 \citation{modbus-paper}
 \citation{simplymodbus}
-\@writefile{toc}{\contentsline {chapter}{\numberline {11}Implementation of Modbus Protocol}{231}{chapter.11}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {11}Implementation of Modbus Protocol}{231}{chapter.11}\protected@file@percent }
 \@writefile{lof}{\addvspace {10\p@ }}
 \@writefile{lot}{\addvspace {10\p@ }}
 \newlabel{modbus}{{11}{231}{Implementation of Modbus Protocol}{chapter.11}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.1}Preliminaries}{231}{section.11.1}}
+\@writefile{toc}{\contentsline {section}{\numberline {11.1}Preliminaries}{231}{section.11.1}\protected@file@percent }
 \citation{simplymodbus}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.1}{\ignorespaces Block diagram representation of the Protocol\relax }}{232}{figure.caption.157}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.1}{\ignorespaces Block diagram representation of the Protocol\relax }}{232}{figure.caption.157}\protected@file@percent }
 \newlabel{mod-block}{{11.1}{232}{Block diagram representation of the Protocol\relax }{figure.caption.157}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.2}{\ignorespaces Master-Slave Query-Response Cycle\relax }}{232}{figure.caption.158}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.2}{\ignorespaces Master-Slave Query-Response Cycle\relax }}{232}{figure.caption.158}\protected@file@percent }
 \newlabel{mod-master-slave}{{11.2}{232}{Master-Slave Query-Response Cycle\relax }{figure.caption.158}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {11.1}{\ignorespaces Pins available on RS485 and their usage\relax }}{233}{table.caption.159}}
+\@writefile{lot}{\contentsline {table}{\numberline {11.1}{\ignorespaces Pins available on RS485 and their usage\relax }}{233}{table.caption.159}\protected@file@percent }
 \newlabel{tab:rs-485-pins}{{11.1}{233}{Pins available on RS485 and their usage\relax }{table.caption.159}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.3}{\ignorespaces Pins in RS485 module\relax }}{233}{figure.caption.160}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.3}{\ignorespaces Pins in RS485 module\relax }}{233}{figure.caption.160}\protected@file@percent }
 \newlabel{rs-485}{{11.3}{233}{Pins in RS485 module\relax }{figure.caption.160}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.1.1}Energy meter}{233}{subsection.11.1.1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.1.1}Energy meter}{233}{subsection.11.1.1}\protected@file@percent }
 \newlabel{sec:energy-meter}{{11.1.1}{233}{Energy meter}{subsection.11.1.1}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {11.2}{\ignorespaces Operations supported by Modbus RTU\relax }}{234}{table.caption.161}}
+\@writefile{lot}{\contentsline {table}{\numberline {11.2}{\ignorespaces Operations supported by Modbus RTU\relax }}{234}{table.caption.161}\protected@file@percent }
 \newlabel{tab:modbus-fun-codes}{{11.2}{234}{Operations supported by Modbus RTU\relax }{table.caption.161}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {11.3}{\ignorespaces Individual parameter address in EM6400\relax }}{234}{table.caption.162}}
+\@writefile{lot}{\contentsline {table}{\numberline {11.3}{\ignorespaces Individual parameter address in EM6400\relax }}{234}{table.caption.162}\protected@file@percent }
 \newlabel{tab:params-addr}{{11.3}{234}{Individual parameter address in EM6400\relax }{table.caption.162}{}}
 \citation{online-crc}
-\@writefile{lot}{\contentsline {table}{\numberline {11.4}{\ignorespaces A request packet to access V1 in EM6400\relax }}{235}{table.caption.164}}
+\@writefile{lot}{\contentsline {table}{\numberline {11.4}{\ignorespaces A request packet to access V1 in EM6400\relax }}{235}{table.caption.164}\protected@file@percent }
 \newlabel{tab:params-rq}{{11.4}{235}{A request packet to access V1 in EM6400\relax }{table.caption.164}{}}
-\@writefile{toc}{\contentsline {paragraph}{Note:}{235}{section*.163}}
-\@writefile{lot}{\contentsline {table}{\numberline {11.5}{\ignorespaces A response packet to access V1 in EM6400\relax }}{236}{table.caption.165}}
+\@writefile{toc}{\contentsline {paragraph}{Note:}{235}{section*.163}\protected@file@percent }
+\@writefile{lot}{\contentsline {table}{\numberline {11.5}{\ignorespaces A response packet to access V1 in EM6400\relax }}{236}{table.caption.165}\protected@file@percent }
 \newlabel{tab:params-rp}{{11.5}{236}{A response packet to access V1 in EM6400\relax }{table.caption.165}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.1.2}Endianness}{236}{subsection.11.1.2}}
-\@writefile{lot}{\contentsline {table}{\numberline {11.6}{\ignorespaces Memory storage of a four-byte integer in little-endian and big-endian\relax }}{237}{table.caption.166}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.1.2}Endianness}{236}{subsection.11.1.2}\protected@file@percent }
+\@writefile{lot}{\contentsline {table}{\numberline {11.6}{\ignorespaces Memory storage of a four-byte integer in little-endian and big-endian\relax }}{237}{table.caption.166}\protected@file@percent }
 \newlabel{tab:memory-storage}{{11.6}{237}{Memory storage of a four-byte integer in little-endian and big-endian\relax }{table.caption.166}{}}
 \citation{ieee-754-conv}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.4}{\ignorespaces Block diagram for reading the parameters in energy meter\relax }}{238}{figure.caption.167}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.4}{\ignorespaces Block diagram for reading the parameters in energy meter\relax }}{238}{figure.caption.167}\protected@file@percent }
 \newlabel{fig:block-diagram}{{11.4}{238}{Block diagram for reading the parameters in energy meter\relax }{figure.caption.167}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.2}Setup for the experiment}{238}{section.11.2}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.5}{\ignorespaces Experimental set up for reading energy meter\relax }}{239}{figure.caption.168}}
+\@writefile{toc}{\contentsline {section}{\numberline {11.2}Setup for the experiment}{238}{section.11.2}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {11.5}{\ignorespaces Experimental set up for reading energy meter\relax }}{239}{figure.caption.168}\protected@file@percent }
 \newlabel{fig:full-set-up}{{11.5}{239}{Experimental set up for reading energy meter\relax }{figure.caption.168}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.3}Software required for this experiment}{239}{section.11.3}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.6}{\ignorespaces Flowchart of Arduino firmware\relax }}{240}{figure.caption.169}}
+\@writefile{toc}{\contentsline {section}{\numberline {11.3}Software required for this experiment}{239}{section.11.3}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {11.6}{\ignorespaces Flowchart of Arduino firmware\relax }}{240}{figure.caption.169}\protected@file@percent }
 \newlabel{fig:modbus-firmware}{{11.6}{240}{Flowchart of Arduino firmware\relax }{figure.caption.169}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.7}{\ignorespaces Flowchart of the steps happening in the FLOSS code\relax }}{241}{figure.caption.170}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.7}{\ignorespaces Flowchart of the steps happening in the FLOSS code\relax }}{241}{figure.caption.170}\protected@file@percent }
 \newlabel{fig:flow-chart}{{11.7}{241}{Flowchart of the steps happening in the FLOSS code\relax }{figure.caption.170}{}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.3.1}Arduino Firmware}{241}{subsection.11.3.1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.3.1}Arduino Firmware}{241}{subsection.11.3.1}\protected@file@percent }
 \newlabel{sec:firmware-modbus}{{11.3.1}{241}{Arduino Firmware}{subsection.11.3.1}{}}
 \@writefile{ard}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{11.{1}}{}}{241}{ardmass.11.1}}
-\@writefile{ard}{\contentsline {section}{\numberline {11.{1}}First 10 lines of the firmware for Modbus Energy Meter experiment}{241}{ardmass.11.1}}
-\newlabel{139@xvr}{{}{241}{Arduino Firmware}{ardmass.11.1}{}}
-\newlabel{139@vr}{{}{241}{Arduino Firmware}{ardmass.11.1}{}}
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{11.{1}}{}}{241}{ardmass.11.1}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {11.{1}}First 10 lines of the firmware for Modbus Energy Meter experiment}{241}{ardmass.11.1}\protected@file@percent }
+\newlabel{139@xvr}{{}{241}}
+\newlabel{139@vr}{{}{241}}
 \newlabel{ard:firmware-modbus}{{11.{1}}{241}{Arduino Firmware}{ardmass.11.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/arduino/send\textunderscore packet.ino}{241}{lstlisting.11.-245}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.4}Manifestation of Modbus protocol through Scilab}{242}{section.11.4}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.5}Reading the electrical parameters from Scilab}{243}{section.11.5}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.5.1}Reading the electrical parameters}{243}{subsection.11.5.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.5.2}Scilab Code}{243}{subsection.11.5.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send\textunderscore packet.ino}{241}{lstlisting.11.-245}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.4}Manifestation of Modbus protocol through Scilab}{242}{section.11.4}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.5}Reading the electrical parameters from Scilab}{243}{section.11.5}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.5.1}Reading the electrical parameters}{243}{subsection.11.5.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.5.2}Scilab Code}{243}{subsection.11.5.2}\protected@file@percent }
 \newlabel{sec:modbus-scilab-code}{{11.5.2}{243}{Scilab Code}{subsection.11.5.2}{}}
 \@writefile{cod}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{1}}{}}{243}{codemass.11.1}}
-\@writefile{cod}{\contentsline {section}{\numberline {11.{1}}First 10 lines of the function for scifunc block}{243}{codemass.11.1}}
-\newlabel{140@xvr}{{}{243}{Scilab Code}{codemass.11.1}{}}
-\newlabel{140@vr}{{}{243}{Scilab Code}{codemass.11.1}{}}
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{1}}{}}{243}{codemass.11.1}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {11.{1}}First 10 lines of the function for scifunc block}{243}{codemass.11.1}\protected@file@percent }
+\newlabel{140@xvr}{{}{243}}
+\newlabel{140@vr}{{}{243}}
 \newlabel{sci:val-modbus}{{11.{1}}{243}{Scilab Code}{codemass.11.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read\textunderscore val.sce}{243}{lstlisting.11.-246}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{2}}{}}{243}{codemass.11.2}}
-\@writefile{cod}{\contentsline {section}{\numberline {11.{2}}First 10 lines of the code for Single Phase Current Output}{243}{codemass.11.2}}
-\newlabel{141@xvr}{{}{243}{Scilab Code}{codemass.11.2}{}}
-\newlabel{141@vr}{{}{243}{Scilab Code}{codemass.11.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read\textunderscore val.sce}{243}{lstlisting.11.-246}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{2}}{}}{243}{codemass.11.2}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {11.{2}}First 10 lines of the code for Single Phase Current Output}{243}{codemass.11.2}\protected@file@percent }
+\newlabel{141@xvr}{{}{243}}
+\newlabel{141@vr}{{}{243}}
 \newlabel{sci:current-modbus}{{11.{2}}{243}{Scilab Code}{codemass.11.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read\textunderscore current.sci}{243}{lstlisting.11.-247}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{3}}{}}{243}{codemass.11.3}}
-\@writefile{cod}{\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Voltage Output}{243}{codemass.11.3}}
-\newlabel{142@xvr}{{}{243}{Scilab Code}{codemass.11.3}{}}
-\newlabel{142@vr}{{}{243}{Scilab Code}{codemass.11.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read\textunderscore current.sci}{243}{lstlisting.11.-247}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{3}}{}}{243}{codemass.11.3}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Voltage Output}{243}{codemass.11.3}\protected@file@percent }
+\newlabel{142@xvr}{{}{243}}
+\newlabel{142@vr}{{}{243}}
 \newlabel{sci:voltage-modbus}{{11.{3}}{243}{Scilab Code}{codemass.11.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read\textunderscore voltage.sci}{244}{lstlisting.11.-248}}
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{4}}{}}{244}{codemass.11.4}}
-\@writefile{cod}{\contentsline {section}{\numberline {11.{4}}First 10 lines of the code for Single Phase Active Power Output}{244}{codemass.11.4}}
-\newlabel{143@xvr}{{}{244}{Scilab Code}{codemass.11.4}{}}
-\newlabel{143@vr}{{}{244}{Scilab Code}{codemass.11.4}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read\textunderscore voltage.sci}{244}{lstlisting.11.-248}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{11.{4}}{}}{244}{codemass.11.4}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {11.{4}}First 10 lines of the code for Single Phase Active Power Output}{244}{codemass.11.4}\protected@file@percent }
+\newlabel{143@xvr}{{}{244}}
+\newlabel{143@vr}{{}{244}}
 \newlabel{sci:modbus-power}{{11.{4}}{244}{Scilab Code}{codemass.11.4}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read\textunderscore active\textunderscore power.sci}{244}{lstlisting.11.-249}}
-\@writefile{toc}{\contentsline {paragraph}{Note: }{244}{section*.171}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.5.3}Output in the Scilab Console}{244}{subsection.11.5.3}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.8}{\ignorespaces Single phase current output on Scilab Console\relax }}{245}{figure.caption.172}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read\textunderscore active\textunderscore power.sci}{244}{lstlisting.11.-249}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note: }{244}{section*.171}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.5.3}Output in the Scilab Console}{244}{subsection.11.5.3}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {11.8}{\ignorespaces Single phase current output on Scilab Console\relax }}{245}{figure.caption.172}\protected@file@percent }
 \newlabel{fig:current-console}{{11.8}{245}{Single phase current output on Scilab Console\relax }{figure.caption.172}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.9}{\ignorespaces Single phase current output in energy meter\relax }}{245}{figure.caption.173}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.9}{\ignorespaces Single phase current output in energy meter\relax }}{245}{figure.caption.173}\protected@file@percent }
 \newlabel{fig:current-meter}{{11.9}{245}{Single phase current output in energy meter\relax }{figure.caption.173}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.10}{\ignorespaces Single phase voltage output on Scilab Console\relax }}{246}{figure.caption.174}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.10}{\ignorespaces Single phase voltage output on Scilab Console\relax }}{246}{figure.caption.174}\protected@file@percent }
 \newlabel{fig:voltage-console}{{11.10}{246}{Single phase voltage output on Scilab Console\relax }{figure.caption.174}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.11}{\ignorespaces Single phase voltage output in energy meter\relax }}{246}{figure.caption.175}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.11}{\ignorespaces Single phase voltage output in energy meter\relax }}{246}{figure.caption.175}\protected@file@percent }
 \newlabel{fig:voltage-meter}{{11.11}{246}{Single phase voltage output in energy meter\relax }{figure.caption.175}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.12}{\ignorespaces Single phase active power output on Scilab Console\relax }}{247}{figure.caption.176}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.12}{\ignorespaces Single phase active power output on Scilab Console\relax }}{247}{figure.caption.176}\protected@file@percent }
 \newlabel{fig:power-console}{{11.12}{247}{Single phase active power output on Scilab Console\relax }{figure.caption.176}{}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.13}{\ignorespaces Single phase active power output in energy meter\relax }}{247}{figure.caption.177}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11.13}{\ignorespaces Single phase active power output in energy meter\relax }}{247}{figure.caption.177}\protected@file@percent }
 \newlabel{fig:power-meter}{{11.13}{247}{Single phase active power output in energy meter\relax }{figure.caption.177}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.6}Reading the electrical parameters from Xcos}{247}{section.11.6}}
-\@writefile{lof}{\contentsline {figure}{\numberline {11.14}{\ignorespaces Xcos diagram to read Energy Meter values}}{248}{figure.caption.178}}
-\newlabel{145@xvr}{{}{248}{Xcos diagram to read Energy Meter values}{figure.caption.178}{}}
-\newlabel{145@vr}{{}{248}{Xcos diagram to read Energy Meter values}{figure.caption.178}{}}
+\@writefile{toc}{\contentsline {section}{\numberline {11.6}Reading the electrical parameters from Xcos}{247}{section.11.6}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {11.14}{\ignorespaces Xcos diagram to read Energy Meter values}}{248}{figure.caption.178}\protected@file@percent }
+\newlabel{145@xvr}{{}{248}}
+\newlabel{145@vr}{{}{248}}
 \newlabel{fig:mod-read}{{11.14}{248}{Xcos diagram to read Energy Meter values}{figure.caption.178}{}}
-\@writefile{lot}{\contentsline {table}{\numberline {11.7}{\ignorespaces Xcos parameters to read Energy Meter\relax }}{248}{table.caption.179}}
+\@writefile{lot}{\contentsline {table}{\numberline {11.7}{\ignorespaces Xcos parameters to read Energy Meter\relax }}{248}{table.caption.179}\protected@file@percent }
 \newlabel{tab:mod-xcos-read}{{11.7}{248}{Xcos parameters to read Energy Meter\relax }{table.caption.179}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.7}Manifestation of Modbus protocol through Python}{249}{section.11.7}}
-\@writefile{toc}{\contentsline {paragraph}{Note: }{249}{section*.180}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.8}Reading the electrical parameters from Python}{249}{section.11.8}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.8.1}Reading the electrical parameters}{249}{subsection.11.8.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.8.2}Python Code}{250}{subsection.11.8.2}}
+\@writefile{toc}{\contentsline {section}{\numberline {11.7}Manifestation of Modbus protocol through Python}{249}{section.11.7}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note: }{249}{section*.180}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.8}Reading the electrical parameters from Python}{249}{section.11.8}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.8.1}Reading the electrical parameters}{249}{subsection.11.8.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.8.2}Python Code}{250}{subsection.11.8.2}\protected@file@percent }
 \newlabel{sec:modbus-python-code}{{11.8.2}{250}{Python Code}{subsection.11.8.2}{}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{11.{1}}{}}{250}{pymass.11.1}}
-\@writefile{pyd}{\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{250}{pymass.11.1}}
-\newlabel{146@xvr}{{}{250}{Python Code}{pymass.11.1}{}}
-\newlabel{146@vr}{{}{250}{Python Code}{pymass.11.1}{}}
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{11.{1}}{}}{250}{pymass.11.1}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{250}{pymass.11.1}\protected@file@percent }
+\newlabel{146@xvr}{{}{250}}
+\newlabel{146@vr}{{}{250}}
 \newlabel{py:current-modbus}{{11.{1}}{250}{Python Code}{pymass.11.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read\textunderscore current.py}{250}{lstlisting.11.-250}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{11.{2}}{}}{250}{pymass.11.2}}
-\@writefile{pyd}{\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{250}{pymass.11.2}}
-\newlabel{147@xvr}{{}{250}{Python Code}{pymass.11.2}{}}
-\newlabel{147@vr}{{}{250}{Python Code}{pymass.11.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read\textunderscore current.py}{250}{lstlisting.11.-250}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{11.{2}}{}}{250}{pymass.11.2}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{250}{pymass.11.2}\protected@file@percent }
+\newlabel{147@xvr}{{}{250}}
+\newlabel{147@vr}{{}{250}}
 \newlabel{py:voltage-modbus}{{11.{2}}{250}{Python Code}{pymass.11.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read\textunderscore voltage.py}{250}{lstlisting.11.-251}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{11.{3}}{}}{250}{pymass.11.3}}
-\@writefile{pyd}{\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{250}{pymass.11.3}}
-\newlabel{148@xvr}{{}{250}{Python Code}{pymass.11.3}{}}
-\newlabel{148@vr}{{}{250}{Python Code}{pymass.11.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read\textunderscore voltage.py}{250}{lstlisting.11.-251}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{11.{3}}{}}{250}{pymass.11.3}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{250}{pymass.11.3}\protected@file@percent }
+\newlabel{148@xvr}{{}{250}}
+\newlabel{148@vr}{{}{250}}
 \newlabel{py:modbus-power}{{11.{3}}{250}{Python Code}{pymass.11.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read\textunderscore active\textunderscore power.py}{250}{lstlisting.11.-252}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.9}Manifestation of Modbus protocol through Julia}{250}{section.11.9}}
-\@writefile{toc}{\contentsline {paragraph}{Note: }{251}{section*.181}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.10}Reading the electrical parameters from Julia}{251}{section.11.10}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.10.1}Reading the electrical parameters}{251}{subsection.11.10.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.10.2}Julia Code}{251}{subsection.11.10.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read\textunderscore active\textunderscore power.py}{250}{lstlisting.11.-252}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.9}Manifestation of Modbus protocol through Julia}{250}{section.11.9}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note: }{251}{section*.181}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.10}Reading the electrical parameters from Julia}{251}{section.11.10}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.10.1}Reading the electrical parameters}{251}{subsection.11.10.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.10.2}Julia Code}{251}{subsection.11.10.2}\protected@file@percent }
 \newlabel{sec:modbus-julia-code}{{11.10.2}{251}{Julia Code}{subsection.11.10.2}{}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{11.{1}}{}}{251}{juliamass.11.1}}
-\@writefile{juliad}{\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{251}{juliamass.11.1}}
-\newlabel{149@xvr}{{}{251}{Julia Code}{juliamass.11.1}{}}
-\newlabel{149@vr}{{}{251}{Julia Code}{juliamass.11.1}{}}
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{11.{1}}{}}{251}{juliamass.11.1}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{251}{juliamass.11.1}\protected@file@percent }
+\newlabel{149@xvr}{{}{251}}
+\newlabel{149@vr}{{}{251}}
 \newlabel{julia:current-modbus}{{11.{1}}{251}{Julia Code}{juliamass.11.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readCurrent.jl}{251}{lstlisting.11.-253}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{11.{2}}{}}{252}{juliamass.11.2}}
-\@writefile{juliad}{\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{252}{juliamass.11.2}}
-\newlabel{150@xvr}{{}{252}{Julia Code}{juliamass.11.2}{}}
-\newlabel{150@vr}{{}{252}{Julia Code}{juliamass.11.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.jl}{251}{lstlisting.11.-253}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{11.{2}}{}}{252}{juliamass.11.2}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{252}{juliamass.11.2}\protected@file@percent }
+\newlabel{150@xvr}{{}{252}}
+\newlabel{150@vr}{{}{252}}
 \newlabel{julia:voltage-modbus}{{11.{2}}{252}{Julia Code}{juliamass.11.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readVoltage.jl}{252}{lstlisting.11.-254}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{11.{3}}{}}{252}{juliamass.11.3}}
-\@writefile{juliad}{\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Active Power Output}{252}{juliamass.11.3}}
-\newlabel{151@xvr}{{}{252}{Julia Code}{juliamass.11.3}{}}
-\newlabel{151@vr}{{}{252}{Julia Code}{juliamass.11.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.jl}{252}{lstlisting.11.-254}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{11.{3}}{}}{252}{juliamass.11.3}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Active Power Output}{252}{juliamass.11.3}\protected@file@percent }
+\newlabel{151@xvr}{{}{252}}
+\newlabel{151@vr}{{}{252}}
 \newlabel{julia:modbus-power}{{11.{3}}{252}{Julia Code}{juliamass.11.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readPower.jl}{252}{lstlisting.11.-255}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.11}Manifestation of Modbus protocol through OpenModelica}{252}{section.11.11}}
-\@writefile{toc}{\contentsline {paragraph}{Note: }{253}{section*.182}}
-\@writefile{toc}{\contentsline {section}{\numberline {11.12}Reading the electrical parameters from OpenModelica}{253}{section.11.12}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.12.1}Reading the electrical parameters}{253}{subsection.11.12.1}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {11.12.2}OpenModelica Code}{253}{subsection.11.12.2}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl}{252}{lstlisting.11.-255}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.11}Manifestation of Modbus protocol through OpenModelica}{252}{section.11.11}\protected@file@percent }
+\@writefile{toc}{\contentsline {paragraph}{Note: }{253}{section*.182}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {11.12}Reading the electrical parameters from OpenModelica}{253}{section.11.12}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.12.1}Reading the electrical parameters}{253}{subsection.11.12.1}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {11.12.2}OpenModelica Code}{253}{subsection.11.12.2}\protected@file@percent }
 \newlabel{sec:modbus-OpenModelica-code}{{11.12.2}{253}{OpenModelica Code}{subsection.11.12.2}{}}
 \@writefile{OpenModelicad}{\addvspace {10pt}}
 \bibdata{bibliography.bib}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{1}}{}}{254}{OpenModelicamass.11.1}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{254}{OpenModelicamass.11.1}}
-\newlabel{152@xvr}{{}{254}{OpenModelica Code}{OpenModelicamass.11.1}{}}
-\newlabel{152@vr}{{}{254}{OpenModelica Code}{OpenModelicamass.11.1}{}}
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{1}}{}}{254}{OpenModelicamass.11.1}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{254}{OpenModelicamass.11.1}\protected@file@percent }
+\newlabel{152@xvr}{{}{254}}
+\newlabel{152@vr}{{}{254}}
 \newlabel{OpenModelica:current-modbus}{{11.{1}}{254}{OpenModelica Code}{OpenModelicamass.11.1}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readCurrent.mo}{254}{lstlisting.11.-256}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{2}}{}}{254}{OpenModelicamass.11.2}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{254}{OpenModelicamass.11.2}}
-\newlabel{153@xvr}{{}{254}{OpenModelica Code}{OpenModelicamass.11.2}{}}
-\newlabel{153@vr}{{}{254}{OpenModelica Code}{OpenModelicamass.11.2}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCurrent.mo}{254}{lstlisting.11.-256}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{2}}{}}{254}{OpenModelicamass.11.2}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{254}{OpenModelicamass.11.2}\protected@file@percent }
+\newlabel{153@xvr}{{}{254}}
+\newlabel{153@vr}{{}{254}}
 \newlabel{OpenModelica:voltage-modbus}{{11.{2}}{254}{OpenModelica Code}{OpenModelicamass.11.2}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readVoltage.mo}{254}{lstlisting.11.-257}}
-\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{3}}{}}{254}{OpenModelicamass.11.3}}
-\@writefile{OpenModelicad}{\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{254}{OpenModelicamass.11.3}}
-\newlabel{154@xvr}{{}{254}{OpenModelica Code}{OpenModelicamass.11.3}{}}
-\newlabel{154@vr}{{}{254}{OpenModelica Code}{OpenModelicamass.11.3}{}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVoltage.mo}{254}{lstlisting.11.-257}\protected@file@percent }
+\@writefile{thm}{\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{3}}{}}{254}{OpenModelicamass.11.3}\protected@file@percent }
+\@writefile{OpenModelicad}{\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{254}{OpenModelicamass.11.3}\protected@file@percent }
+\newlabel{154@xvr}{{}{254}}
+\newlabel{154@vr}{{}{254}}
 \newlabel{OpenModelica:modbus-power}{{11.{3}}{254}{OpenModelica Code}{OpenModelicamass.11.3}{}}
-\@writefile{lol}{\contentsline {lstlisting}{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readPower.mo}{254}{lstlisting.11.-258}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPower.mo}{254}{lstlisting.11.-258}\protected@file@percent }
 \bibcite{CNES-Scilab}{1}
 \bibcite{scilab-arduino}{2}
 \bibcite{oshw-ref}{3}
@@ -1658,7 +1658,7 @@
 \bibcite{scilab-ref}{12}
 \bibcite{scilab-interop}{13}
 \bibcite{xcos-ref}{14}
-\@writefile{toc}{\contentsline {chapter}{\numberline {References}}{255}{chapter*.183}}
+\@writefile{toc}{\contentsline {chapter}{\numberline {References}}{255}{chapter*.183}\protected@file@percent }
 \bibcite{python-ref}{15}
 \bibcite{pySerial}{16}
 \bibcite{julia-ref}{17}
diff --git a/floss-arduino.blg b/floss-arduino.blg
index d85bb8a..303ea5e 100644
--- a/floss-arduino.blg
+++ b/floss-arduino.blg
@@ -1,8 +1,8 @@
-This is BibTeX, Version 0.99d (TeX Live 2017)
-Capacity: max_strings=100000, hash_size=100000, hash_prime=85009
+This is BibTeX, Version 0.99d (TeX Live 2019/Debian)
+Capacity: max_strings=200000, hash_size=200000, hash_prime=170003
 The top-level auxiliary file: floss-arduino.aux
 The style file: unsrt.bst
-Database file #1: bibliography.bib.bib
+Database file #1: bibliography.bib
 You've used 27 entries,
             1791 wiz_defined-function locations,
             542 strings with 5999 characters,
diff --git a/floss-arduino.cod b/floss-arduino.cod
index 49a517b..8c610db 100644
--- a/floss-arduino.cod
+++ b/floss-arduino.cod
@@ -1,34 +1,34 @@
 \addvspace {10pt}
-\contentsline {section}{\numberline {3.{1}}A Scilab code to check whether the firmware is properly installed or not}{34}{codemass.3.1}
+\contentsline {section}{\numberline {3.{1}}A Scilab code to check whether the firmware is properly installed or not}{34}{codemass.3.1}%
 \addvspace {10pt}
 \addvspace {10pt}
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{75}{codemass.4.1}
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{76}{codemass.4.2}
-\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{76}{codemass.4.3}
-\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{76}{codemass.4.4}
+\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{75}{codemass.4.1}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{76}{codemass.4.2}%
+\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{76}{codemass.4.3}%
+\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{76}{codemass.4.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the GUI}{101}{codemass.5.1}
-\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{102}{codemass.5.2}
+\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the GUI}{101}{codemass.5.1}%
+\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{102}{codemass.5.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{122}{codemass.6.1}
-\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{122}{codemass.6.2}
+\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{122}{codemass.6.1}%
+\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{122}{codemass.6.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{140}{codemass.7.1}
+\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{140}{codemass.7.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{158}{codemass.8.1}
-\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{158}{codemass.8.2}
+\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{158}{codemass.8.1}%
+\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{158}{codemass.8.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{182}{codemass.9.1}
-\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{182}{codemass.9.2}
-\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{182}{codemass.9.3}
-\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{183}{codemass.9.4}
+\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{182}{codemass.9.1}%
+\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{182}{codemass.9.2}%
+\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{182}{codemass.9.3}%
+\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{183}{codemass.9.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{212}{codemass.10.1}
-\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{212}{codemass.10.2}
-\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{213}{codemass.10.3}
+\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{212}{codemass.10.1}%
+\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{212}{codemass.10.2}%
+\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{213}{codemass.10.3}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {11.{1}}First 10 lines of the function for scifunc block}{243}{codemass.11.1}
-\contentsline {section}{\numberline {11.{2}}First 10 lines of the code for Single Phase Current Output}{243}{codemass.11.2}
-\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Voltage Output}{243}{codemass.11.3}
-\contentsline {section}{\numberline {11.{4}}First 10 lines of the code for Single Phase Active Power Output}{244}{codemass.11.4}
+\contentsline {section}{\numberline {11.{1}}First 10 lines of the function for scifunc block}{243}{codemass.11.1}%
+\contentsline {section}{\numberline {11.{2}}First 10 lines of the code for Single Phase Current Output}{243}{codemass.11.2}%
+\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Voltage Output}{243}{codemass.11.3}%
+\contentsline {section}{\numberline {11.{4}}First 10 lines of the code for Single Phase Active Power Output}{244}{codemass.11.4}%
diff --git a/floss-arduino.fdb_latexmk b/floss-arduino.fdb_latexmk
index 60179da..df78abd 100644
--- a/floss-arduino.fdb_latexmk
+++ b/floss-arduino.fdb_latexmk
@@ -1,454 +1,472 @@
 # Fdb version 3
-["bibtex floss-arduino"] 1621789515 "floss-arduino.aux" "floss-arduino.bbl" "floss-arduino" 1621789527
-  "/usr/local/texlive/2017/texmf-dist/bibtex/bst/base/unsrt.bst" 1480098433 18030 1376b4b231b50c66211e47e42eda2875 ""
-  "bibliography.bib" 1621178517 6034 f6dc0004d2871e4ca7419c08dc204c04 ""
-  "floss-arduino.aux" 1621789526 176114 6c64d281204b1d26c86f5683c1e2168b ""
+["bibtex floss-arduino"] 1621802069 "floss-arduino.aux" "floss-arduino.bbl" "floss-arduino" 1621802253
+  "/usr/share/texlive/texmf-dist/bibtex/bst/base/unsrt.bst" 1292289607 18030 1376b4b231b50c66211e47e42eda2875 ""
+  "bibliography.bib" 1620434363 6034 f6dc0004d2871e4ca7419c08dc204c04 ""
+  "floss-arduino.aux" 1621802120 182140 ee9595098d56a4e444d4f84928d16bcf "pdflatex"
   (generated)
   "floss-arduino.bbl"
   "floss-arduino.blg"
-["makeindex floss-arduino.idx"] 1621789515 "floss-arduino.idx" "floss-arduino.ind" "floss-arduino" 1621789527
-  "floss-arduino.idx" 1621789526 237 2b0c63ab27d5c1b698757397b5c69953 ""
+["makeindex floss-arduino.idx"] 1621802059 "floss-arduino.idx" "floss-arduino.ind" "floss-arduino" 1621802253
+  "floss-arduino.idx" 1621802120 237 2b0c63ab27d5c1b698757397b5c69953 "pdflatex"
   (generated)
   "floss-arduino.ind"
   "floss-arduino.ilg"
-["pdflatex"] 1621789516 "floss-arduino.tex" "floss-arduino.pdf" "floss-arduino" 1621789527
-  "/Users/kannan/Library/texmf/tex/latex/cclicenses/cclicenses.sty" 1186816761 4225 a1be0bbd8b5d331922d63e0112439580 ""
-  "/Users/kannan/Library/texmf/tex/latex/ifthen/ifthen.sty" 1221500493 4727 e343510af0375feb3bfa0becca5be450 ""
-  "/Users/kannan/Library/texmf/tex/latex/listings/listings.cfg" 1174815216 1546 cda21886f370b2a08959be5b7c522bd0 ""
-  "/Users/kannan/Library/texmf/tex/latex/listings/listings.sty" 1174815264 69513 fec659f9bed04d83e450ba947986a759 ""
-  "/Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty" 1174815276 66074 380238ad0cb9b776a21e69c3cbdb119e ""
-  "/Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty" 1174815284 74724 72c2f057d80f34ab0467658e6850eb84 ""
-  "/Users/kannan/Library/texmf/tex/latex/listings/lstpatch.sty" 1174815284 7717 d0ad3df4da3fcda855b4dcf0746e9022 ""
-  "/Users/kannan/Library/texmf/tex/latex/listings/varioref/varioref.sty" 1174815296 30322 d1c565a1fba71a49c75ce7c3dc9c0996 ""
-  "/Users/kannan/Library/texmf/tex/latex/morefloats.sty" 1174836183 1883 cc44fef04724c623a156ca51618af9d3 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/enc/dvips/base/8r.enc" 1480098666 4850 80dc9bab7f31fb78a000ccfed0e27cab ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/enc/dvips/cm-super/cm-super-t1.enc" 1480098666 2971 def0b6c1f0b107b3b936def894055589 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/map/fontname/texfonts.map" 1480098670 3287 e6b82fe08f5336d4d5ebc73fb1152e87 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx0900.tfm" 1480098696 3584 1a7de6c99457381c64abc1a7c545505f ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx1095.tfm" 1480098696 3584 21b378cca2e40816b0e6d74a4dc98f04 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx1200.tfm" 1480098696 3584 402da0b29eafbad07963b1224b222f18 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx1440.tfm" 1480098696 3584 13049b61b922a28b158a38aeff75ee9b ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx2074.tfm" 1480098696 3584 7666d038713b9e38abb5c2e0f6972188 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx2488.tfm" 1480098696 3584 0181dbc4d429c3ba4e30feba37b5df96 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0500.tfm" 1480098696 3584 178baad7ffca7f5d3428a83bd7cc64c3 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0600.tfm" 1480098696 3584 291a5713401683441e0a8c8f4417b17b ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0800.tfm" 1480098696 3584 49064b465390a8e316a3c8417a050403 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0900.tfm" 1480098696 3584 d3d8ac8b25ca19c0a40b86a5db1e8ccc ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1000.tfm" 1480098696 3584 adb004a0c8e7c46ee66cad73671f37b4 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1095.tfm" 1480098696 3584 929cdff2b7a8c11bd4d49fd68cb0ae70 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1200.tfm" 1480098696 3584 f80ddd985bd00e29e9a6047ebd9d4781 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1440.tfm" 1480098696 3584 3169d30142b88a27d4ab0e3468e963a2 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm2074.tfm" 1480098696 3584 8e2870ec7aa9776f59654942b0923f51 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm2488.tfm" 1480098696 3584 406ad7b70d9a41f7833f92b6313150c8 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecsi1095.tfm" 1480098696 3584 1a0353d13d3e702865b76e3b1c321b5b ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecsl1095.tfm" 1480098696 3584 91bcd1ec8de84adb306899ddf050f500 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecss1095.tfm" 1480098696 3584 8ece407347b270c252c46fdfaef5a9ef ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecti1095.tfm" 1480098696 3072 b73d2778cc3af44970de4de5e032d7f6 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex7.tfm" 1480098698 1004 54797486969f23fa377b128694d548df ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex8.tfm" 1480098698 988 bdf658c3bfc2d96d3c8b02cfc1c94c20 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex9.tfm" 1480098698 996 a18840b13b499c08ac2de96a99eda4bc ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm" 1480098700 1292 a0ca2398d40dc5494f22d2fbff33269b ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm" 1480098700 1380 bb8d389860f8cf35648da78ba6d79918 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmex10.tfm" 1480098701 992 662f679a0b3d2d53c1b94050fdaa3f50 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi10.tfm" 1480098701 1528 abec98dbc43e172678c11b3b9031252a ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi6.tfm" 1480098701 1512 f21f83efb36853c0b70002322c1ab3ad ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi8.tfm" 1480098701 1520 eccf95517727cb11801f4f1aee3a21b4 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi9.tfm" 1480098701 1524 d89e2d087a9828407a196f428428ef4a ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr10.tfm" 1480098701 1296 45809c5a464d5f32c8f98ba97c1bb47f ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr6.tfm" 1480098701 1300 b62933e007d01cfd073f79b963c01526 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr8.tfm" 1480098701 1292 21c1c5bfeaebccffdb478fd231a0997d ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr9.tfm" 1480098701 1292 6b21b9c2c7bebb38aa2273f7ca0fb3af ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy10.tfm" 1480098701 1124 6c73e740cf17375f03eec0ee63599741 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy6.tfm" 1480098701 1116 933a60c408fc0a863a92debe84b2d294 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy8.tfm" 1480098701 1120 8b7d695260f3cff42e636090a8002094 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy9.tfm" 1480098701 1116 25a7bf822c58caf309a702ef79f4afbb ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb" 1480098733 30251 6afa5cb1d0204815a708a080681d4674 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb" 1480098733 36299 5f9df58c2139e7edcf37c8fca4bd384d ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb" 1480098733 35752 024fb6c41858982481f6968b5fc26508 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb" 1480098733 32726 0a1aea6fcd6468ee2cf64d891f5c43c8 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb" 1480098733 33993 9b89b85fd2d9df0482bd47194d1d3bf3 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb" 1480098733 32569 5e5ddc8df908dea60932f3c484a54c0d ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb" 1480098733 32587 1788b0c1c5b39540c96f5e42ccd6dae8 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb" 1480098733 32626 4f5c1b83753b1dd3a97d1b399a005b4b ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy9.pfb" 1480098733 32442 c975af247b6702f7ca0c299af3616b80 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/bera/fvmr8a.pfb" 1480098734 29228 440002646d60f9d1a0cdf5878b9a308f ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx0900.pfb" 1480098737 143961 201304b65f97bc643fbd0bcf0685d1fe ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx1095.pfb" 1480098737 154600 ea54091d31de803b613ba9e80ca51709 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx1200.pfb" 1480098737 140176 d4962f948b4cc0adf4d3dde77a128c95 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx1440.pfb" 1480098737 135942 859a90cad7494a1e79c94baf546d7de5 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx2074.pfb" 1480098737 140194 627cc7f36c05b80e25d178974ccb3442 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx2488.pfb" 1480098737 135938 299ac3a69892db3b7674a8b2543b0a77 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0500.pfb" 1480098737 180418 5fa231fda2d05a9c0eca9fd483cc7254 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0600.pfb" 1480098737 162624 9dcc92cd3b1dfe2ecc80e6da7f2eb6bd ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0800.pfb" 1480098737 164227 3df942b4ff2124425d8fb1b6d3e01c7a ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0900.pfb" 1480098737 149037 995a6f1e12c1d647b99b1cf55db78699 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm1000.pfb" 1480098737 138258 6525c253f16cededa14c7fd0da7f67b2 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm1095.pfb" 1480098737 145929 f25e56369a345c4ff583b067cd87ce8e ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfsi1095.pfb" 1480098737 106965 72348192f7f7f7c44b4558f2996b4879 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfss1095.pfb" 1480098737 97272 e31c1319e3ff43b442c57e2c8f2acc52 ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfti1095.pfb" 1480098737 196446 8fbbe4b97b83e5182def6d29a44e57fb ""
-  "/usr/local/texlive/2017/texmf-dist/fonts/vf/public/bera/fvmr8t.vf" 1480098760 2156 58631a68efc4afbec92c522ba77a542f ""
-  "/usr/local/texlive/2017/texmf-dist/tex/context/base/mkii/supp-pdf.mkii" 1480098806 71627 94eb9990bed73c364d7f53f960cc8c5b ""
-  "/usr/local/texlive/2017/texmf-dist/tex/generic/ifxetex/ifxetex.sty" 1480098815 1458 43ab4710dc82f3edeabecd0d099626b2 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/gettitlestring.sty" 1480098815 8237 3b62ef1f7e2c23a328c814b3893bc11f ""
-  "/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty" 1490564930 185082 1fb09d7d24834377f95006300bc91fd2 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty" 1480098815 70864 bcd5b216757bd619ae692a151d90085d ""
-  "/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/infwarerr.sty" 1480098815 8253 473e0e41f9adadb1977e8631b8f72ea6 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/ltxcmds.sty" 1480098815 18425 5b3c0c59d76fac78978b5558e83c1f36 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsbsy.sty" 1480098820 2210 5c54ab129b848a5071554186d0168766 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsgen.sty" 1480098820 4160 c115536cf8d4ff25aa8c1c9bc4ecb79a ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsmath.sty" 1485129665 84329 81aa65c5042562f79cb421feff9b8bdc ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsopn.sty" 1480098820 4115 318a66090112f3aa3f415aeb6fe8540f ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amstext.sty" 1480098820 2431 fe3078ec12fc30287f568596f8e0b948 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/bk11.clo" 1480098821 8147 071613f48164a91769d060c59fd275f7 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/book.cls" 1480098821 22945 7df8250bf76418cf651c357d3631fbc3 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/fontenc.sty" 1492297155 4571 13977df0eda144b93597fc709035ad1f ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/makeidx.sty" 1480098821 1940 c559b92ca91f1b2a0e60d836d4973f41 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/omscmr.fd" 1480098821 2256 80ce1168fb4ce6a85583a9cf8972c013 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/t1cmss.fd" 1480098821 2408 9332529df2b0aa93e638793f315828fc ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/base/t1enc.def" 1492297155 10006 a90ba4035cf778f32f424e297d92e235 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/bera/beramono.sty" 1480098822 767 619e175cf21788218aa95de61f93b82f ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/bera/t1fvm.fd" 1480098822 819 be55b7e3c5cc7c059be8eb7852d712b5 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption.sty" 1480098823 66233 8b81cfab95a1f8fc2f0f6c89415b087a ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption3.sty" 1480098823 64866 1ea74c5f2d1685881497f021b8f186b2 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/chngcntr/chngcntr.sty" 1480098825 4063 effd8d02c8357a7a1b0c045c4e25e292 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/cite/cite.sty" 1480098825 26218 19edeff8cdc2bcb704e8051dc55eb5a7 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/fancybox/fancybox.sty" 1480098827 27261 5ae6156674330dc345adb79b6e5d8966 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty" 1480098827 22494 ab2f238426db63334832f85a72ef1f3b ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/color.cfg" 1480098830 1213 620bba36b25224fa9b7e1ccb4ecb76fd ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/graphics.cfg" 1480098830 1224 978390e9c2234eab29404bc21b268d1e ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics-def/pdftex.def" 1485129666 58250 3792a9d2d1d664ee8c742498e295b051 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/color.sty" 1480098830 7031 4ca2945c73eec4e726c0da188fbbf50f ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphics.sty" 1492297155 14603 b288c52bd5d46d593af31dbc7e548236 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphicx.sty" 1480098830 8125 557ab9f1bfa80d369fb45a914aa8a3b4 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/keyval.sty" 1480098830 2594 d18d5e19aa8239cf867fa670c556d2e9 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/rotating.sty" 1485129666 6969 f1843f5f0545182bf419df38f75e3930 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/trig.sty" 1480098830 3980 0a268fbfda01e381fa95821ab13b6aee ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hpdftex.def" 1489964469 51983 9a4f683a2a7b213874a28bc4008b84d9 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hyperref.sty" 1489964469 233808 b63d91422c362e723c6e8b1a2fffcba5 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/nameref.sty" 1480098831 12949 81e4e808884a8f0e276b69410e234656 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/pd1enc.def" 1489964469 14098 7631f11156e5f9cd76010dbd230aa268 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg" 1480098833 678 4792914a8f45be57bb98413425e4c7af ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/hyperref.cfg" 1480098833 235 6031e5765137be07eed51a510b2b8fb7 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/layouts/layouts.sty" 1480098833 103628 f0d6a23a8bf6863780e994d496016c62 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/ntheorem/ntheorem.sty" 1480098836 43120 799f06af91d8fb275749981ca21a5146 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/auxhook.sty" 1480098836 3834 4363110eb0ef1eb2b71c8fcbcdb6c357 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty" 1480098836 12095 5337833c991d80788a43d3ce26bd1c46 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/grfext.sty" 1480098836 7075 2fe3d848bba95f139de11ded085e74aa ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/kvoptions.sty" 1480098836 22417 1d9df1eb66848aa31b18a593099cf45c ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty" 1480098836 9581 023642318cef9f4677efe364de1e2a27 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/paralist/paralist.sty" 1485126066 14857 82c76ebe8f06becf69ab309565b2a0cb ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/seqsplit/seqsplit.sty" 1480098838 1346 2729ac6e87ab535b7428c6807dace823 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/subfig/subfig.sty" 1480098839 21369 9ef165ca6df8815c92e693146a376c92 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/tools/theorem.sty" 1480098841 4955 40b74ecf3d034beec00dccbb92044a79 ""
-  "/usr/local/texlive/2017/texmf-dist/tex/latex/url/url.sty" 1480098842 12796 8edb7d69a20b857904dd0ea757c14ec9 ""
-  "/usr/local/texlive/2017/texmf-dist/web2c/texmf.cnf" 1494087824 32646 eadc4ca26cdbe7105ac7c593aa8c4f72 ""
-  "/usr/local/texlive/2017/texmf-var/fonts/map/pdftex/updmap/pdftex.map" 1495593472 2350277 a699055bee05bf8a40b0504752487295 ""
-  "/usr/local/texlive/2017/texmf-var/web2c/pdftex/pdflatex.fmt" 1501558720 4129591 619ae5aa92c7522a32e3a6fc193a3cf9 ""
-  "/usr/local/texlive/2017/texmf.cnf" 1495593465 577 2b71d4d888f9e5560b2e99985915a9fa ""
-  "floss-arduino.OpenModelicad" 1621789526 2767 32751d56d8204a685d6c1bd0b89a86f3 ""
-  "floss-arduino.ard" 1621789526 2314 f11aee1856fe813a609bc0c2acbc2ad2 ""
-  "floss-arduino.aux" 1621789526 176114 6c64d281204b1d26c86f5683c1e2168b ""
-  "floss-arduino.bbl" 1621789516 3903 02b5ac06a1bbf3155ccc47bfd4f7ca51 "bibtex floss-arduino"
-  "floss-arduino.cod" 1621789526 2802 913ac771123a7f8d5149c9960e87447b ""
-  "floss-arduino.ind" 1621789515 288 1367e08b6f5cfc1c1a3f8718570f0de1 "makeindex floss-arduino.idx"
-  "floss-arduino.juliad" 1621789526 2642 8bfa295cbcc87ec2837f8841c9093d96 ""
-  "floss-arduino.lof" 1621789526 16420 9e8bd12b810cdebafbbf11ebf935cd42 ""
-  "floss-arduino.lot" 1621789526 4395 41fc394b7bc7d79720bdb14dd41baa26 ""
-  "floss-arduino.out" 1621789526 16111 5b3e12da3b8f1fd705d7aea671c7b61f ""
-  "floss-arduino.pyd" 1621789526 2571 878ca0a793b166678114105bccd04227 ""
-  "floss-arduino.tex" 1621789473 6979 ed5da3e39906261f13d1942281c87b71 ""
-  "floss-arduino.toc" 1621789526 20890 bb3a96743d5ed5c4ae81929b67158c00 ""
-  "suppl/acr.tex" 1615102332 1926 fd6481c4666ee0d60331b7d4cc24b645 ""
-  "suppl/intro.tex" 1621789297 4556 73b62e843675460bbaffd8e1da37d725 ""
-  "suppl/styles.tex" 1615534732 8143 aa3280f0b59c8631fe8ec44895c9e871 ""
-  "tools/floss-firmware/floss-firmware.ino" 1621178517 34359 32a40397062276bb3dcecda801db076e ""
-  "tools/julia/test_firmware.jl" 1621178517 168 3aaf8bf98ff271a626085f256b5bbbc9 ""
-  "tools/openmodelica/windows//test_firmware.mo" 1621178517 616 087d18e8525d7f7e7b49bc700b2d08e4 ""
-  "tools/python/test_firmware.py" 1621178517 702 075224ba07fdcb46e41c20e2e4c001be ""
-  "tools/scilab/test_firmware.sce" 1621178517 121 068cb1b11cc5bef7c9f9ddaa09316c22 ""
-  "tools/shield/pcb_board_V1p2.png" 1621178517 114643 13d3ee33823ec2c138265f5f4daf35c8 ""
-  "tools/shield/shield-V1p2.jpg" 1615102332 221681 3be329dcc0590284c83508bfc96ede10 ""
-  "tools/shield/shield-V1p2.png" 1621178517 66281 607473e0cfda2ff4b7f6c85d1bbb8ba5 ""
-  "user-code/dcmotor/OpenModelica/dcmotor-both.mo" 1621178517 1086 a156cd2ac05b581b0e2a0d6daa70642f ""
-  "user-code/dcmotor/OpenModelica/dcmotor-clock.mo" 1621178517 1002 e95685106fe5e50eba4824e6b0119bd5 ""
-  "user-code/dcmotor/OpenModelica/dcmotor-loop.mo" 1621178517 1237 a8426d0f501ac4c2571d5c9d567948b3 ""
-  "user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino" 1621178517 504 8a85b1257282a49f134cec02b30182e2 ""
-  "user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino" 1621178517 426 6316038efc09b67c75c077917c40e3e4 ""
-  "user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino" 1621178517 665 a13b061f7e773a0ff7e178ed73915282 ""
-  "user-code/dcmotor/dcmotor-OM.tex" 1621217755 11241 982246ee49a10c44361808ce84762a47 ""
-  "user-code/dcmotor/dcmotor-base.tex" 1621787416 11770 fb33750e88fbae0f4074559c505d396b ""
-  "user-code/dcmotor/dcmotor-julia.tex" 1621217746 7297 f523e59616d249643cd2aece01846f9a ""
-  "user-code/dcmotor/dcmotor-python.tex" 1621787416 8723 3ab8a8441aa6ae3554432967fb90c5a3 ""
-  "user-code/dcmotor/dcmotor-scilab.tex" 1621787416 24568 97daad3cd28a25992255315583db4e3c ""
-  "user-code/dcmotor/figures/dc_motor_description.jpg" 1615102332 694440 a424c50ad327bc459a4ab4808f398262 ""
-  "user-code/dcmotor/figures/dcmotor-both.png" 1621178517 107985 6c7508b957f7980eea96e374fc266250 ""
-  "user-code/dcmotor/figures/dcmotor-clock.png" 1621178517 127858 2fa567ed8934ca422ee86d50d1d5545f ""
-  "user-code/dcmotor/figures/dcmotor-loop.png" 1621178517 105062 026f713ad0fe348d43acd5f25ba6f933 ""
-  "user-code/dcmotor/figures/dcmotor_board.png" 1615102332 114406 92155ec29d259e5fcda6bce5c6b08004 ""
-  "user-code/dcmotor/figures/schematic.png" 1615102332 29144 971dcba68f6e79a1c3c5777dac2627ea ""
-  "user-code/dcmotor/figures/uno-pwm.jpg" 1621178517 3266094 71ed00a219ac59152d8c597e1e8856d3 ""
-  "user-code/dcmotor/julia/dcmotor-both.jl" 1621178517 270 2a8057cb974830a91cb2ccaaeaeec8d3 ""
-  "user-code/dcmotor/julia/dcmotor-clock.jl" 1621178517 223 18e184ba00cf35946e451fb37590725a ""
-  "user-code/dcmotor/julia/dcmotor-loop.jl" 1621178517 342 a624b9b98fc1787face9e2a5cc07f84f ""
-  "user-code/dcmotor/python/dcmotor-both.py" 1621178517 864 275cefa529d28743b47a46b87b31ff91 ""
-  "user-code/dcmotor/python/dcmotor-clock.py" 1621178517 830 e4bb3de5e98eb204a3dada5009db8343 ""
-  "user-code/dcmotor/python/dcmotor-loop.py" 1621178517 968 97af73f5b57d7b510ecd4383c3bc4f93 ""
-  "user-code/dcmotor/scilab/dcmotor-both.sce" 1621178517 478 628af43e0c3f08f643098a596ad835cf ""
-  "user-code/dcmotor/scilab/dcmotor-clock.sce" 1621178517 358 714e3d2a3677b19a80dcc181cadf6e4d ""
-  "user-code/dcmotor/scilab/dcmotor-loop.sce" 1621178517 624 72d01e150c668c28e3823b3ff124a6f1 ""
-  "user-code/hw-env/figures/OSHW-138px.png" 1615102332 8171 62fe0090b5a01299adb7fb7b4d9ac130 ""
-  "user-code/hw-env/figures/arduino-3d-printer.jpg" 1615102332 39052 6dff9ea86aa1541b274437fe913ddd46 ""
-  "user-code/hw-env/figures/arduino-ide.jpg" 1615102332 194767 bfef476ab04769e6b222de9ff24a9623 ""
-  "user-code/hw-env/figures/arduino-phone.jpg" 1615102332 135255 4b4165291b755b12ce897d7a408f2d6d ""
-  "user-code/hw-env/figures/arduino.png" 1615102332 149178 70a98357748236149bf214d5d18b33f6 ""
-  "user-code/hw-env/figures/hw-device-manager.jpg" 1615102332 123199 593d451c63d150854f6e8f091ae0b56b ""
-  "user-code/hw-env/figures/lily.jpg" 1615102332 74607 a5cc307933e091ab5da6b90172f6ddd9 ""
-  "user-code/hw-env/figures/mega.jpg" 1615102332 1075629 4343e24216f3e871b746baab98dc92b5 ""
-  "user-code/hw-env/figures/miccontblk.png" 1615102332 32073 d40dc886413fc19a7f28ed042cb42be3 ""
-  "user-code/hw-env/figures/resolution.png" 1615102332 4945 8c36e13a636f064fe99a32583bd5a09f ""
-  "user-code/hw-env/figures/shield-crop.jpg" 1615102332 88724 a405ddfd57bdc79018c6674fc399d67f ""
-  "user-code/hw-env/figures/update-driver.png" 1615102332 40170 607a1cd06856f1eecd42ebc14fbe2daf ""
-  "user-code/hw-env/hw-env.tex" 1621178517 22147 0d8258cc2e1382f1c7f63eb72c73902e ""
-  "user-code/ldr/OpenModelica/ldr-led.mo" 1621178517 1175 513f4a0dc313bc054f4bb8abe75f73fa ""
-  "user-code/ldr/OpenModelica/ldr-read.mo" 1621178517 860 b6de0b97782c2153052b43d45ca918a2 ""
-  "user-code/ldr/arduino/ldr-led/ldr-led.ino" 1621178517 355 3a0bb525b88842f2c29277bfae805ace ""
-  "user-code/ldr/arduino/ldr-read/ldr-read.ino" 1621178517 230 f00bce053f207cda3fe5d9efb50b244f ""
-  "user-code/ldr/figures/LDR-led.png" 1621178517 240349 523edd11a7bcb1002c01b0410de0183e ""
-  "user-code/ldr/figures/LDR.png" 1621178517 222329 b099f728f89ec6e9e39f2222e410488c ""
-  "user-code/ldr/figures/ldr-conn.png" 1615102332 27006 651850b554b0e5f042da89db408bd75e ""
-  "user-code/ldr/figures/ldr-led-2.png" 1621178517 136223 7b7c3b7364cc3325f23880eb53d878c2 ""
-  "user-code/ldr/figures/ldr-led-read-plot.PNG" 1621178517 24035 ed0d5139439de9ae01beed624c24c5ba ""
-  "user-code/ldr/figures/ldr-read-plot.PNG" 1621178517 24848 8d7361073a2c28de3752da61df946a24 ""
-  "user-code/ldr/figures/ldr-read-xcos.PNG" 1615102332 34063 b0eeeea9642553ea0bb2889cb52cfa60 ""
-  "user-code/ldr/figures/ldr.jpg" 1615102332 4060 da1140b101edcf75176b3dfbb765dd42 ""
-  "user-code/ldr/figures/ldr_sym.png" 1615102332 29267 73b70e220429569a98caa86348349aa1 ""
-  "user-code/ldr/julia/ldr-led.jl" 1621178517 328 c56b41b79308edfeac581824b292db8e ""
-  "user-code/ldr/julia/ldr-read.jl" 1621178517 182 f022609c62ce20cd8a544b56bb24b920 ""
-  "user-code/ldr/ldr-OM.tex" 1621188727 4330 bf71650135097470010dee6009bf2f2c ""
-  "user-code/ldr/ldr-base.tex" 1621188556 10370 2dc790d6cd4dee2eed4edccdf2dc929f ""
-  "user-code/ldr/ldr-julia.tex" 1621188720 3871 b16ec475383e1331a08b220b22f13fdb ""
-  "user-code/ldr/ldr-python.tex" 1621188684 4576 9bdb80c78c973ef430c00fe2d2ce719b ""
-  "user-code/ldr/ldr-scilab.tex" 1621188639 13462 ffeb0049b804a21e1f86c11a37113738 ""
-  "user-code/ldr/python/ldr-led.py" 1621178517 878 6fd4249dccee88b68be9f42ac32e1238 ""
-  "user-code/ldr/python/ldr-read.py" 1621178517 690 e0b7ce7fda0fd80b7a9910b066c54ef1 ""
-  "user-code/ldr/scilab/ldr-led.sce" 1621178517 485 06b1e7a58af58334a9e0deed47713a69 ""
-  "user-code/ldr/scilab/ldr-read.sce" 1621178517 383 672cc7539820df32f3a25b93cc0f4fa7 ""
-  "user-code/led/OpenModelica/led-blue-delay.mo" 1621178517 974 b66fe8fce6005b87afc23c6d7d3009e5 ""
-  "user-code/led/OpenModelica/led-blue-red.mo" 1621178517 1154 7e5164d0b0a78fcd7a6327bbfff835c9 ""
-  "user-code/led/OpenModelica/led-blue.mo" 1621178517 802 063ab42c583ad7e9203c09fdac11beb2 ""
-  "user-code/led/OpenModelica/led-green-blink.mo" 1621178517 1098 58f96b5892b748dbca27a4411f54fd08 ""
-  "user-code/led/arduino/led-blue-delay/led-blue-delay.ino" 1621178517 134 a265af0df0c837b3860a1bd8f4f17db3 ""
-  "user-code/led/arduino/led-blue-red/led-blue-red.ino" 1621178517 215 db5fdea678579e2b65dbcaddcca033c6 ""
-  "user-code/led/arduino/led-blue/led-blue.ino" 1621178517 99 25f30fcd7cc7d7b6b9aa222deff00437 ""
-  "user-code/led/arduino/led-green-blink/led-green-blink.ino" 1621178517 375 d859b4f26e521d4c1afe19f92c8a1ebe ""
-  "user-code/led/figures/arduino-new-shield.jpeg" 1621178517 404878 627d5ed86bf3271cb2aed2af239e8339 ""
-  "user-code/led/figures/led-blue-com-2.png" 1621178517 118844 76197f2f2d54e9f24ff5133feb6b20e4 ""
-  "user-code/led/figures/led-blue-delay-com-2.png" 1621178517 131759 39ca1a34902244e390493719e5e5afa9 ""
-  "user-code/led/figures/led-blue-red-com-2.png" 1621178517 139836 8e4b4cfd07c210053264e34bfa61d292 ""
-  "user-code/led/figures/led-green-blink-com-2.png" 1621178518 145226 f748b57a3aedec908e67f4a2a063f94b ""
-  "user-code/led/figures/led.png" 1615102332 3299 6fdaa5be1f5df2c4fa3cc404b111c357 ""
-  "user-code/led/figures/led_output.png" 1615102332 4933000 3daaef0abe81c66166eaa3fd911c9b66 ""
-  "user-code/led/figures/rgb-led-bb.png" 1621178518 241915 7c5374def5f441085b2d93294dde7979 ""
-  "user-code/led/figures/schematic.png" 1615102332 34562 2b5d2cb148a99242ffb4343097ced0a0 ""
-  "user-code/led/julia/led-blue-delay.jl" 1621178518 213 dd9c8a8b157baac9432478c33b8aa14e ""
-  "user-code/led/julia/led-blue-red.jl" 1621178518 332 919a1421675457207ff70ee12da93ac6 ""
-  "user-code/led/julia/led-blue.jl" 1621178518 170 c9cc13e4fb6e898855537bb9e1f2a787 ""
-  "user-code/led/julia/led-green-blink.jl" 1621178518 249 d785472e844af87c34e32322ccb211e2 ""
-  "user-code/led/led-OM.tex" 1621188180 6090 eeb3656cf34ca23b4e74568da8ba3a8f ""
-  "user-code/led/led-base.tex" 1621187774 12573 9ca1a36290acd21f7147bf1579e43aec ""
-  "user-code/led/led-julia.tex" 1621188172 4230 113d65c42a2badd946d2f312a0e216ca ""
-  "user-code/led/led-python.tex" 1621787416 8163 ab9aceb1edd0b85ce2df3d9da772f2e5 ""
-  "user-code/led/led-scilab.tex" 1621188063 15554 57a47400c55d0e67271b6cd2a300cc7e ""
-  "user-code/led/python/led-blue-delay.py" 1621178518 805 9c5bde89850fc3b25ced778dfafe1dcf ""
-  "user-code/led/python/led-blue-red.py" 1621178518 1039 339cefbe997737f931646cba049b8d12 ""
-  "user-code/led/python/led-blue.py" 1621178518 723 be6248a455119500e6930030c0c92250 ""
-  "user-code/led/python/led-green-blink.py" 1621178518 800 7d238166a3ec7776881175fdee95f619 ""
-  "user-code/led/scilab/led-blue-delay.sce" 1621178518 306 971bfdb5febffab85ff7e39d9486f19f ""
-  "user-code/led/scilab/led-blue-red.sce" 1621178518 534 9ed44e179f5f8f2d1833438c6e950670 ""
-  "user-code/led/scilab/led-blue.sce" 1621178518 264 54ed7e9095e17363e0ce5fb00cade1d1 ""
-  "user-code/led/scilab/led-green-blink.sce" 1621178518 484 6075a3408ac416b1a08b9812441b114f ""
-  "user-code/modbus/OpenModelica/readCurrent.mo" 1615102332 415 303989413cadae961b297f9b27e7fea0 ""
-  "user-code/modbus/OpenModelica/readPower.mo" 1615102332 435 3f5615fb24b7ddbe58cdd8e1bef132ae ""
-  "user-code/modbus/OpenModelica/readVoltage.mo" 1615102332 415 6e1ebbf05cf22f407c8164397a270067 ""
-  "user-code/modbus/arduino/send_packet.ino" 1615102332 8116 cf6c7187b76c359b0e96b2d6ab867417 ""
-  "user-code/modbus/figures/Full-Set-Up.png" 1615102332 1614647 0b0a3133138b7b5e4362f127b21dbbca ""
-  "user-code/modbus/figures/active-power-output-setup.jpg" 1621178518 970986 3c5dcb7d7a8cc8c4506feed7894ca347 ""
-  "user-code/modbus/figures/active-power-output.png" 1621178518 6070 e338cbd838bd2ffe7cb999dccd6c8af4 ""
-  "user-code/modbus/figures/arduino_code_flowchart.png" 1615102332 30551 d5d6d0068508ecc437e64b129d03adeb ""
-  "user-code/modbus/figures/block-diagram.PNG" 1615102332 12984 34da68fad73a956dd18a72f2742c01c8 ""
-  "user-code/modbus/figures/current-output-setup.jpg" 1621178518 852771 a15f31abba4a1197ad1aabfc7084a9ac ""
-  "user-code/modbus/figures/current-output.png" 1621178518 5616 8e6b1ab6c0719055cc81fd1f0ab7e6b6 ""
-  "user-code/modbus/figures/fig1.png" 1615102332 7589 f96d8da2f8a9b651e6a2b84ff0fcd2b5 ""
-  "user-code/modbus/figures/fig2.png" 1615102332 8357 df83830062ead3aba95548cffc6e5fc2 ""
-  "user-code/modbus/figures/fig3.png" 1615102332 64436 45a719b4c6c25010861af86e20af0675 ""
-  "user-code/modbus/figures/flowchart.png" 1615102332 24159 a806f9f56a4606c9f0640bb0eb7e36ff ""
-  "user-code/modbus/figures/read_value_xcos.png" 1615102332 51074 2267729983ef5dcb788a3f74130a179a ""
-  "user-code/modbus/figures/voltage-output-setup.jpg" 1621178518 964103 77691bdec7885f306d9af858aa024c6b ""
-  "user-code/modbus/figures/voltage-output.png" 1621178518 5506 102a213a2a607379d826356f732ad44e ""
-  "user-code/modbus/julia/readCurrent.jl" 1615102332 419 d37bba6d385680f69e39aeeeee270cc2 ""
-  "user-code/modbus/julia/readPower.jl" 1615102332 408 5fe8daf1c8116370b28ad3bd3f32aab4 ""
-  "user-code/modbus/julia/readVoltage.jl" 1615102332 418 4e26e56e234bd7df4a03ade0f2866654 ""
-  "user-code/modbus/modbus-OM.tex" 1621787416 3802 a14f05ea05ae4e3b524b3e454bdd061b ""
-  "user-code/modbus/modbus-base.tex" 1621787416 25043 4680a3bbf2f6f29953d197452175127a ""
-  "user-code/modbus/modbus-julia.tex" 1621787416 5413 9858b932ddf107268b38882b8d3b8f13 ""
-  "user-code/modbus/modbus-python.tex" 1621787416 5818 54ac697aae0be2a3a941c4567aac8346 ""
-  "user-code/modbus/modbus-scilab.tex" 1621787416 12337 243a65054fa901e3aacee64857c7cba6 ""
-  "user-code/modbus/python/read_active_power.py" 1615102332 1107 5c75379ec91b5b117fc94be55100a639 ""
-  "user-code/modbus/python/read_current.py" 1615102332 1102 c628a8be5444f9b5ffbb348dff567336 ""
-  "user-code/modbus/python/read_voltage.py" 1615102332 1102 cf711c7b2bc93043409419eb1ae2169b ""
-  "user-code/modbus/scilab/read_active_power.sci" 1615102332 1072 ec17d07cbbf336756ed22d5469b68e25 ""
-  "user-code/modbus/scilab/read_current.sci" 1615102332 1090 97c84be93c41f56ed4617dfe2ffaf5bb ""
-  "user-code/modbus/scilab/read_val.sce" 1615102332 1474 89f368fad786acfa64c8f7eab2d6c14a ""
-  "user-code/modbus/scilab/read_voltage.sci" 1615102332 1100 00726a382c03a31bf874d21d1cc5eb16 ""
-  "user-code/pot/OpenModelica/pot-threshold.mo" 1621178518 1512 1402778c2f3b5ec7f6285466d545e598 ""
-  "user-code/pot/arduino/pot-threshold/pot-threshold.ino" 1621178518 805 12e5e0df10302ea489b57721d004d184 ""
-  "user-code/pot/figures/POT-led-bb.png" 1621178518 243193 63a4dc18807be931f97545bfa9167a30 ""
-  "user-code/pot/figures/pot-threshold-1.PNG" 1621178518 127870 911e5afafb8a33b220cf66889fac91d7 ""
-  "user-code/pot/figures/potmeter.png" 1615102332 99691 b56662d8570cfc9c91c52b76f21d1802 ""
-  "user-code/pot/figures/schematic.png" 1615102332 24453 85099648f5c8e616d3cfd5f3d6d7a7bf ""
-  "user-code/pot/julia/pot-threshold.jl" 1621178518 666 9b730ca97ed22ec8050aa381d4161447 ""
-  "user-code/pot/pot-OM.tex" 1621189022 2428 e00a4a0fc2dde69645883e0e161cb41d ""
-  "user-code/pot/pot-base.tex" 1621188876 8733 cbe2103c1242a714ed3fd639d1ba04a1 ""
-  "user-code/pot/pot-julia.tex" 1621189017 2031 630ec4debd43acbd61d1ef9bc938efa5 ""
-  "user-code/pot/pot-python.tex" 1621188977 2221 bbe65be48f47a22445f193c34eece033 ""
-  "user-code/pot/pot-scilab.tex" 1621188934 5204 cd6a7e9a7e6bd742cf06e77bfb7c1797 ""
-  "user-code/pot/python/pot-threshold.py" 1621178518 1230 800d4698ea9b0e37651e65fc06cded76 ""
-  "user-code/pot/scilab/pot-threshold.sce" 1621178518 697 c4b81a0bfec8d4d932692e85bdaa44b4 ""
-  "user-code/push/OpenModelica/led-push-button.mo" 1621178518 1226 c823f27eb8ddafbc85d7beeeab95e952 ""
-  "user-code/push/OpenModelica/push-button-status.mo" 1621178518 1002 404445ef6477d66c90debf67d0b16ff5 ""
-  "user-code/push/arduino/led-push-button/led-push-button.ino" 1621178518 500 74749a5bf90b0b8730fac1c5c2d2098e ""
-  "user-code/push/arduino/push-button-status/push-button-status.ino" 1621178518 399 8bc698528184374bd12aa2bd7447ae54 ""
-  "user-code/push/figures/led-push-button.PNG" 1615102332 29100 9fb97725008a4f858830924290bafd86 ""
-  "user-code/push/figures/push-button-status.PNG" 1615102332 27403 da6c41bb605a3801512422bfefcaf4ea ""
-  "user-code/push/figures/pushbutton-conn.png" 1615102332 25321 c2e109dc82f76507b9a0b5f6e09be7db ""
-  "user-code/push/figures/sci-ard-meter.png" 1621178518 14461 903bc95446fd86d03d6cd50e9801d91d ""
-  "user-code/push/figures/switch-led.png" 1621178518 240149 ad9fa2cc65d176482fbdf38c633d826f ""
-  "user-code/push/figures/switch.png" 1621178518 220988 2689323a6f7a00d63e81ef7abb52961a ""
-  "user-code/push/julia/led-push-button.jl" 1621178518 362 d6ece80fbd90baec0c77d842796ce55f ""
-  "user-code/push/julia/push-button-status.jl" 1621178518 220 ee74db42ff4cafa9fdfa53bf629610f7 ""
-  "user-code/push/push-OM.tex" 1621787416 4349 85113378082d662185f92f82c31e0052 ""
-  "user-code/push/push-base.tex" 1621188286 9542 58b98694b202c0c277d28136f2a40af6 ""
-  "user-code/push/push-julia.tex" 1621188450 3532 267ddf5e111076677bf4ab39ae1aca08 ""
-  "user-code/push/push-python.tex" 1621188402 3501 2725b30124fa209b5fc6b05fcc5a5f18 ""
-  "user-code/push/push-scilab.tex" 1621188350 8452 cbce9e9caa2c44eeb4f75cc7288a3653 ""
-  "user-code/push/python/led-push-button.py" 1621178518 840 7ac297fea9149dd4f1097d1eb1127438 ""
-  "user-code/push/python/push-button-status.py" 1621178518 726 f8a32147aae8c969c2bd3a7634370342 ""
-  "user-code/push/scilab/led-push-button.sce" 1621178518 395 ffd3626904bd116d49ebbbd9ba896f6c ""
-  "user-code/push/scilab/push-button-status.sce" 1621178518 374 60eb3a3f4806ea383dadee5441f2be98 ""
-  "user-code/servo/OpenModelica/servo-init.mo" 1621178518 843 9bcc28dfc460db6e1f1e16e9450b2e32 ""
-  "user-code/servo/OpenModelica/servo-loop.mo" 1621178518 1063 f214713878cab8f7ac1b10091485a135 ""
-  "user-code/servo/OpenModelica/servo-pot.mo" 1621178518 1327 9ab722a57ce5d891d9a52873e26a6f5a ""
-  "user-code/servo/OpenModelica/servo-reverse.mo" 1621178518 1034 779a75c4a7d778029a081e506455685c ""
-  "user-code/servo/arduino/servo-init/servo-init.ino" 1621178518 295 65f0ac74c87b7c1934dc586d83ab0efe ""
-  "user-code/servo/arduino/servo-loop/servo-loop.ino" 1621178518 402 c218fcd4caeb348d81352b676dc5c541 ""
-  "user-code/servo/arduino/servo-pot/servo-pot.ino" 1621178518 671 145aea71e1ac2ef50822eb25d83108d6 ""
-  "user-code/servo/arduino/servo-reverse/servo-reverse.ino" 1621178518 331 5305061778c867a1ac20fee4fa50e995 ""
-  "user-code/servo/figures/servo-bb.png" 1621178518 225975 568cf3b00806f2ae8562b2af9fe5a249 ""
-  "user-code/servo/figures/servo-init.png" 1615102332 26415 598a8cb33dbe09dbd1edc7b8735f4816 ""
-  "user-code/servo/figures/servo-loop.png" 1615102332 32952 67f7dd0d2bb32be2b1c48f217b17c189 ""
-  "user-code/servo/figures/servo-pot-bb.png" 1621178518 236985 d6100121102ec6696c76eb30db17b3c0 ""
-  "user-code/servo/figures/servo-pot.png" 1615102332 33204 436709fd3e5dbedb22b8af8b2d2ca4ba ""
-  "user-code/servo/figures/servo-reverse.png" 1615102332 25147 1703152c1e98c6000e54589b6bd467a7 ""
-  "user-code/servo/figures/servo-uno-shield.jpg" 1621178518 4433005 1ca49ed870fd1a7d92392a6aa2c053f6 ""
-  "user-code/servo/julia/servo-init.jl" 1621178518 174 2f1751adbcd50ad10fb1fc63b126c50d ""
-  "user-code/servo/julia/servo-loop.jl" 1621178518 244 02733944ad3e8beb0aece530a7ff2325 ""
-  "user-code/servo/julia/servo-pot.jl" 1621178518 325 6b14ad4d9b9f190780bb5ba37b9794ae ""
-  "user-code/servo/julia/servo-reverse.jl" 1621178518 218 c8fb1faf7cc98344286dc9a6e095195f ""
-  "user-code/servo/python/servo-init.py" 1621178518 757 4bdf2886e706c11615812d5f505b864d ""
-  "user-code/servo/python/servo-loop.py" 1621178518 802 35d9aee2d082ddc1b9893af2c440c092 ""
-  "user-code/servo/python/servo-pot.py" 1621178518 863 8c8e4066fa8337d37afce0795cd68e84 ""
-  "user-code/servo/python/servo-reverse.py" 1621178518 825 af6e0576f7e25e769305c3821e8fd920 ""
-  "user-code/servo/scilab/servo-init.sce" 1621178518 329 0f8c9cd741b741d412b27aabb0b641da ""
-  "user-code/servo/scilab/servo-loop.sce" 1621178518 525 6a4902117c83c5390c1877a95a5e363e ""
-  "user-code/servo/scilab/servo-pot.sce" 1621178518 530 2d82664fdd3a16c6588b2a4dc4e66a22 ""
-  "user-code/servo/scilab/servo-reverse.sce" 1621178518 532 11110ec91f2ddb2261afbbec00198d94 ""
-  "user-code/servo/servo-OM.tex" 1621214280 6743 e3bb3333e0e297defe427b0d2a0ab5c0 ""
-  "user-code/servo/servo-base.tex" 1621214129 13398 42be6b1599117acc4dcfc2645741fed1 ""
-  "user-code/servo/servo-julia.tex" 1621214272 6393 f5b5c76dbc63b086b6593dc5c1d3e5a2 ""
-  "user-code/servo/servo-python.tex" 1621214226 9390 e10fc3c7c70de72eb1cbcf10b7342863 ""
-  "user-code/servo/servo-scilab.tex" 1621214186 17336 d4a14c40c81913ae60506458a1cf945a ""
-  "user-code/sw-env/figures/OMEdit-UI.png" 1621178518 1412111 17b388a3069a3685b7d14c6fb67ee8eb ""
-  "user-code/sw-env/figures/OMEdit-libraries.png" 1621178518 154031 fd27a1537f6271ab01c53fd1d2c9d214 ""
-  "user-code/sw-env/figures/arduino-palette.png" 1615102332 10751 8229db142816e63c5b5761df7ebf0e33 ""
-  "user-code/sw-env/figures/browse-directory.png" 1615102332 30302 e7161778e4b66145020832ffda95f16b ""
-  "user-code/sw-env/figures/builder.png" 1615102332 62847 a945d2601d325541677f819dda7ee305 ""
-  "user-code/sw-env/figures/clock-blk.png" 1615102332 8341 2796147e1cfe4ae15ff1581cf7347de4 ""
-  "user-code/sw-env/figures/com-properties.png" 1615102332 75092 d364fc390b7b1913845428ff03e09b17 ""
-  "user-code/sw-env/figures/cscope-config.png" 1615102332 15445 4f02500263554c7a25c5355d43fe0720 ""
-  "user-code/sw-env/figures/device-manager-com.png" 1621178518 170869 2521a3958703e2565de76bfdcb864733 ""
-  "user-code/sw-env/figures/device-manager.png" 1615102332 66176 4b944d863a9a68ac712fec18d1072374 ""
-  "user-code/sw-env/figures/julia-download.png" 1621178518 90834 a76f37ce7ab329cff72e393ca325d834 ""
-  "user-code/sw-env/figures/julia-pkg-windows.png" 1621178518 41169 b9da9617cd69c69bb952d9604b7919ec ""
-  "user-code/sw-env/figures/julia-pkg.png" 1621178518 46183 5e4ac4a37a0b2c9bb6b11151ef3ffbbd ""
-  "user-code/sw-env/figures/julia-repl-windows.png" 1621178518 39594 686340edfe0c380de10e1f8ee3af3582 ""
-  "user-code/sw-env/figures/julia-terminal-repl.png" 1621178518 44140 3c889d9ebd5a899a1d28d60ef542f70a ""
-  "user-code/sw-env/figures/julia-windows-install.png" 1621178518 26406 e46da4d14d9b869903f4107320f821e9 ""
-  "user-code/sw-env/figures/launch-arduino-opt.png" 1621178518 33421 f8b38ae30fdf8828bc50d1f0b1b72fe4 ""
-  "user-code/sw-env/figures/linux-cd.png" 1615102332 39093 885ba08c89ecb4d2c400fa4b07d4ea66 ""
-  "user-code/sw-env/figures/linux-port.png" 1615102332 22330 f34b363966c6f589a01e2e3083bf7d90 ""
-  "user-code/sw-env/figures/loader.png" 1615102332 59139 c20511f34e925a6fb5628e3a13c4442a ""
-  "user-code/sw-env/figures/om-Modeling.png" 1621178518 151173 3000377e285a1c18e6b2e2c50a706348 ""
-  "user-code/sw-env/figures/om-modeling-views.png" 1621178518 138971 3676cbc7350ef2f65c828d96b7fb6ce5 ""
-  "user-code/sw-env/figures/om-open-model.png" 1621178518 3436700 a7f685410189a7926c1c7ce02eea2324 ""
-  "user-code/sw-env/figures/om-sim-success.png" 1621178518 72125 9017411bfe49b3ef6a4c3d8817ebc532 ""
-  "user-code/sw-env/figures/om-simulate.png" 1621178518 193689 816ffeeb17ad0b184a7c5faf3911ad28 ""
-  "user-code/sw-env/figures/om-text-view.png" 1621178518 225672 29da7c1783940469a04bb6534660b5ff ""
-  "user-code/sw-env/figures/om-toolbox-loaded.png" 1621178518 62386 dcd446cac813a164e5c326d2360928c9 ""
-  "user-code/sw-env/figures/openmodelica-run-anyway.png" 1621178518 52705 7ad6616822b91c117b7208fecfa9759a ""
-  "user-code/sw-env/figures/plot-blk.png" 1615102332 9025 823d55c99e8f9e091c480135e11fed88 ""
-  "user-code/sw-env/figures/python-windows-install.JPG" 1621178518 52113 d8d1a4dbf12dad7489007c03c6aff723 ""
-  "user-code/sw-env/figures/sim-setup.png" 1615102332 18806 fca3d6d4d7692c539f6dd8ee5fca2286 ""
-  "user-code/sw-env/figures/sine-blk.png" 1615102332 31364 922217660a4514750566368a9628caca ""
-  "user-code/sw-env/figures/sine-gen.png" 1615102332 18116 34af55052c486ca14630fa8175b34a20 ""
-  "user-code/sw-env/figures/sine-output.png" 1615102332 5195 b769374644003c54a930b7fd08e2e7ee ""
-  "user-code/sw-env/figures/table_functions_crop.pdf" 1615102332 84671 8377aefb061b0e251291558e34dd4b23 ""
-  "user-code/sw-env/figures/test-console.png" 1615102332 53960 b989b14626fd496e19335d18673cc602 ""
-  "user-code/sw-env/figures/win-command-prompt.png" 1621178518 18481 e5638717dbbb0533251e1adcbc9b10f0 ""
-  "user-code/sw-env/figures/windows-cmd.png" 1621178518 18559 6c4f07f73f86b74127aa8c76e23f3285 ""
-  "user-code/sw-env/figures/xcos-help.png" 1615102332 87275 3c9b5157ebebe381cd7b5281cdd28482 ""
-  "user-code/sw-env/sw-env-OM.tex" 1621494136 14684 246a4e6711439c5535a43c55e6ccdb94 ""
-  "user-code/sw-env/sw-env-base.tex" 1621494136 20371 3831691d48b6edf9faf7d654fa4a9c05 ""
-  "user-code/sw-env/sw-env-julia.tex" 1621787416 17785 1a5d3d2453b52cfd531a90b3cb92a789 ""
-  "user-code/sw-env/sw-env-python.tex" 1621494136 12570 407eb1692224c6bac00b407a35921d83 ""
-  "user-code/sw-env/sw-env-scilab.tex" 1621494136 25295 c66e7c7dfc43d03ad408bc17aeaf13bf ""
-  "user-code/thermistor/OpenModelica/therm-buzzer.mo" 1621178518 1299 e1551a279a3614eeaf9116b1002e12eb ""
-  "user-code/thermistor/OpenModelica/therm-read.mo" 1621178518 882 b7d88b5d1f38eff59552a98507af5858 ""
-  "user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino" 1621178518 436 95759b7a9f40f5df3f6bf578fac78e35 ""
-  "user-code/thermistor/arduino/therm-read/therm-read.ino" 1621178518 222 11d9158a56bc707bb62c21c4112a5ac2 ""
-  "user-code/thermistor/figures/BUZZER-Diagram-crop.pdf" 1615102332 44580 9821d615a59f54c353650c91d53397ff ""
-  "user-code/thermistor/figures/NTC-bead.jpg" 1615102332 26322 dc48012480bf36dffe1bc53f53fff468 ""
-  "user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf" 1615102332 51122 63d1034bfec8c1e50343da5dd4e8a355 ""
-  "user-code/thermistor/figures/therm-buzzer-xcos.png" 1615102332 62520 d7a651c93d11aa2ade2fbcaaae324492 ""
-  "user-code/thermistor/figures/therm-buzzer.png" 1615102332 21991 43392992f62b8fc4acd5d04722ac65ef ""
-  "user-code/thermistor/figures/therm-read-xcos.png" 1615102332 57179 0dddd7d72b0b013c4bca6de583a2bb80 ""
-  "user-code/thermistor/figures/therm-read.png" 1615102332 19495 9e15703acd9c4205b29b15f718ba5669 ""
-  "user-code/thermistor/figures/therm-sym.png" 1615102332 17914 5c4de58664f2c605c14ebafd7187b119 ""
-  "user-code/thermistor/figures/thermistor-buzzer.png" 1621178518 251485 47e52a1b05f033ac5efc513d0c38b843 ""
-  "user-code/thermistor/figures/thermistor.png" 1621178518 227111 a497c7b79fab30a854e897df8f7b9e5a ""
-  "user-code/thermistor/julia/therm-buzzer.jl" 1621178518 361 703362d6f73c2ce36d978a43225a8dbf ""
-  "user-code/thermistor/julia/therm-read.jl" 1621178518 183 640b24fbc4b351c3ad132e1f06e21993 ""
-  "user-code/thermistor/python/therm-buzzer.py" 1621178518 986 0feaddc58806c5744d676064126a7242 ""
-  "user-code/thermistor/python/therm-read.py" 1621178518 748 cba86aade80fa8215987d3707938af4c ""
-  "user-code/thermistor/scilab/therm-buzzer.sce" 1621178518 542 66209c5ab2e09a16efa85ab68a541109 ""
-  "user-code/thermistor/scilab/therm-read.sce" 1621178518 399 3d4d94a3003c16014a51200a9b472b66 ""
-  "user-code/thermistor/thermistor-OM.tex" 1621189282 5413 2604e0806d714fe51411dcf49eb41abd ""
-  "user-code/thermistor/thermistor-base.tex" 1621189129 12060 ceacf10a396b42fe1b4434075deb9129 ""
-  "user-code/thermistor/thermistor-julia.tex" 1621189273 5083 6e773263fd0378465696e28325689b98 ""
-  "user-code/thermistor/thermistor-python.tex" 1621787416 6690 dcd0b9c6629922cc2675da1a8eec8d97 ""
-  "user-code/thermistor/thermistor-scilab.tex" 1621189183 15817 4f8b0a1727ee952a36196e611ce5308c ""
+["pdflatex"] 1621802069 "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex" "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf" "floss-arduino" 1621802253
+  "/etc/texmf/web2c/texmf.cnf" 1602253014 475 c0e671620eb5563b2130f56340a5fde8 ""
+  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux" 1621802120 182140 ee9595098d56a4e444d4f84928d16bcf ""
+  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex" 1621802252 6985 1c71aec5ffafba23a5356a68d74c9d8e ""
+  "/usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc" 1165713224 4850 80dc9bab7f31fb78a000ccfed0e27cab ""
+  "/usr/share/texlive/texmf-dist/fonts/map/fontname/texfonts.map" 1577235249 3524 cb3e574dea2d1052e39280babc910dc8 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx0900.tfm" 1136768653 3584 1a7de6c99457381c64abc1a7c545505f ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx1095.tfm" 1136768653 3584 21b378cca2e40816b0e6d74a4dc98f04 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx1200.tfm" 1136768653 3584 402da0b29eafbad07963b1224b222f18 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx1440.tfm" 1136768653 3584 13049b61b922a28b158a38aeff75ee9b ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx2074.tfm" 1136768653 3584 7666d038713b9e38abb5c2e0f6972188 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx2488.tfm" 1136768653 3584 0181dbc4d429c3ba4e30feba37b5df96 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0500.tfm" 1136768653 3584 178baad7ffca7f5d3428a83bd7cc64c3 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0600.tfm" 1136768653 3584 291a5713401683441e0a8c8f4417b17b ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0800.tfm" 1136768653 3584 49064b465390a8e316a3c8417a050403 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0900.tfm" 1136768653 3584 d3d8ac8b25ca19c0a40b86a5db1e8ccc ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1000.tfm" 1136768653 3584 adb004a0c8e7c46ee66cad73671f37b4 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1095.tfm" 1136768653 3584 929cdff2b7a8c11bd4d49fd68cb0ae70 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1200.tfm" 1136768653 3584 f80ddd985bd00e29e9a6047ebd9d4781 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1440.tfm" 1136768653 3584 3169d30142b88a27d4ab0e3468e963a2 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm2074.tfm" 1136768653 3584 8e2870ec7aa9776f59654942b0923f51 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm2488.tfm" 1136768653 3584 406ad7b70d9a41f7833f92b6313150c8 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecsi1095.tfm" 1136768653 3584 1a0353d13d3e702865b76e3b1c321b5b ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecsl1095.tfm" 1136768653 3584 91bcd1ec8de84adb306899ddf050f500 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecss1095.tfm" 1136768653 3584 8ece407347b270c252c46fdfaef5a9ef ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecti1095.tfm" 1136768653 3072 b73d2778cc3af44970de4de5e032d7f6 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0500.tfm" 1136768653 1536 b3387106d9afecbfe14bde2de6eadf47 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0600.tfm" 1136768653 1536 12e8c510d3e158fdd0e9a42e75118bd9 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0800.tfm" 1136768653 1536 05df9db6aeccc4eea94fec15c9024f79 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0900.tfm" 1136768653 1536 c4f439db76ef96a9c53bc437f35ffe20 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm1095.tfm" 1136768653 1536 02c06700a42be0f5a28664c7273f82e7 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex7.tfm" 1246382020 1004 54797486969f23fa377b128694d548df ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex8.tfm" 1246382020 988 bdf658c3bfc2d96d3c8b02cfc1c94c20 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex9.tfm" 1246382020 996 a18840b13b499c08ac2de96a99eda4bc ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm" 1136768653 1292 a0ca2398d40dc5494f22d2fbff33269b ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm" 1136768653 1380 bb8d389860f8cf35648da78ba6d79918 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmex10.tfm" 1136768653 992 662f679a0b3d2d53c1b94050fdaa3f50 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi10.tfm" 1136768653 1528 abec98dbc43e172678c11b3b9031252a ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi6.tfm" 1136768653 1512 f21f83efb36853c0b70002322c1ab3ad ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi8.tfm" 1136768653 1520 eccf95517727cb11801f4f1aee3a21b4 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi9.tfm" 1136768653 1524 d89e2d087a9828407a196f428428ef4a ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr10.tfm" 1136768653 1296 45809c5a464d5f32c8f98ba97c1bb47f ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr6.tfm" 1136768653 1300 b62933e007d01cfd073f79b963c01526 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr8.tfm" 1136768653 1292 21c1c5bfeaebccffdb478fd231a0997d ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr9.tfm" 1136768653 1292 6b21b9c2c7bebb38aa2273f7ca0fb3af ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy10.tfm" 1136768653 1124 6c73e740cf17375f03eec0ee63599741 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy6.tfm" 1136768653 1116 933a60c408fc0a863a92debe84b2d294 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy8.tfm" 1136768653 1120 8b7d695260f3cff42e636090a8002094 ""
+  "/usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy9.tfm" 1136768653 1116 25a7bf822c58caf309a702ef79f4afbb ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb" 1248133631 30251 6afa5cb1d0204815a708a080681d4674 ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb" 1248133631 36299 5f9df58c2139e7edcf37c8fca4bd384d ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb" 1248133631 35752 024fb6c41858982481f6968b5fc26508 ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb" 1248133631 32726 0a1aea6fcd6468ee2cf64d891f5c43c8 ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb" 1248133631 33993 9b89b85fd2d9df0482bd47194d1d3bf3 ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb" 1248133631 32569 5e5ddc8df908dea60932f3c484a54c0d ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb" 1248133631 32587 1788b0c1c5b39540c96f5e42ccd6dae8 ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb" 1248133631 32626 4f5c1b83753b1dd3a97d1b399a005b4b ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy9.pfb" 1248133631 32442 c975af247b6702f7ca0c299af3616b80 ""
+  "/usr/share/texlive/texmf-dist/fonts/type1/public/bera/fvmr8a.pfb" 1136849748 29228 440002646d60f9d1a0cdf5878b9a308f ""
+  "/usr/share/texlive/texmf-dist/fonts/vf/public/bera/fvmr8t.vf" 1136768653 2156 58631a68efc4afbec92c522ba77a542f ""
+  "/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii" 1461363279 71627 94eb9990bed73c364d7f53f960cc8c5b ""
+  "/usr/share/texlive/texmf-dist/tex/generic/atbegshi/atbegshi.sty" 1575674566 24708 5584a51a7101caf7e6bbf1fc27d8f7b1 ""
+  "/usr/share/texlive/texmf-dist/tex/generic/bigintcalc/bigintcalc.sty" 1576625341 40635 c40361e206be584d448876bba8a64a3b ""
+  "/usr/share/texlive/texmf-dist/tex/generic/bitset/bitset.sty" 1576016050 33961 6b5c75130e435b2bfdb9f480a09a39f9 ""
+  "/usr/share/texlive/texmf-dist/tex/generic/etexcmds/etexcmds.sty" 1576625273 7734 b98cbb34c81f667027c1e3ebdbfce34b ""
+  "/usr/share/texlive/texmf-dist/tex/generic/gettitlestring/gettitlestring.sty" 1576625223 8371 9d55b8bd010bc717624922fb3477d92e ""
+  "/usr/share/texlive/texmf-dist/tex/generic/iftex/iftex.sty" 1573336935 6902 30fdaf7dc5636b8e3afa306210c45cae ""
+  "/usr/share/texlive/texmf-dist/tex/generic/infwarerr/infwarerr.sty" 1575499628 8356 7bbb2c2373aa810be568c29e333da8ed ""
+  "/usr/share/texlive/texmf-dist/tex/generic/intcalc/intcalc.sty" 1576625065 31769 002a487f55041f8e805cfbf6385ffd97 ""
+  "/usr/share/texlive/texmf-dist/tex/generic/kvdefinekeys/kvdefinekeys.sty" 1576878844 5412 d5a2436094cd7be85769db90f29250a6 ""
+  "/usr/share/texlive/texmf-dist/tex/generic/kvsetkeys/kvsetkeys.sty" 1576624944 13807 952b0226d4efca026f0e19dd266dcc22 ""
+  "/usr/share/texlive/texmf-dist/tex/generic/ltxcmds/ltxcmds.sty" 1576624883 18552 1e1cc7b75da0dfaacce7cdcb27d306bf ""
+  "/usr/share/texlive/texmf-dist/tex/generic/pdfescape/pdfescape.sty" 1576015897 19007 15924f7228aca6c6d184b115f4baa231 ""
+  "/usr/share/texlive/texmf-dist/tex/generic/uniquecounter/uniquecounter.sty" 1576624663 7008 f92eaa0a3872ed622bbf538217cd2ab7 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty" 1523134290 2211 ca7ce284ab93c8eecdc6029dc5ccbd73 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty" 1523134290 4161 7f6eb9092061a11f87d08ed13515b48d ""
+  "/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty" 1580683321 85660 baee036978c7a91f4e2bba43f05e5945 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty" 1523134290 4116 32e6abd27229755a83a8b7f18e583890 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty" 1523134290 2432 8ff93b1137020e8f21930562a874ae66 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/atveryend/atveryend.sty" 1576191570 19336 ce7ae9438967282886b3b036cfad1e4d ""
+  "/usr/share/texlive/texmf-dist/tex/latex/auxhook/auxhook.sty" 1576625391 3935 57aa3c3e203a5c2effb4d2bd2efbc323 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/base/bk11.clo" 1580683321 8301 dcd9ec352700e202dd0ad360f33021e3 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/base/book.cls" 1580683321 23147 87043b6c3ff70b5e5185aee55d462dd7 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty" 1581632200 4947 0c2888dd88121ae675fc6e82213623ba ""
+  "/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty" 1580683321 5159 892429808d9e0e2b3548aaefd9a06ed0 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty" 1580683321 1940 dd4f2aa11c89855a3c47d09758782ba5 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/base/t1cmss.fd" 1580683321 2622 2e7b4cea91736cafdafba1c0db58bc1c ""
+  "/usr/share/texlive/texmf-dist/tex/latex/bera/beramono.sty" 1137109926 767 619e175cf21788218aa95de61f93b82f ""
+  "/usr/share/texlive/texmf-dist/tex/latex/bera/t1fvm.fd" 1137109926 819 be55b7e3c5cc7c059be8eb7852d712b5 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/caption/caption.sty" 1578175482 57350 70b0c251b0022f1db12ad7dd4c1aa547 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/caption/caption3.sty" 1578175482 62012 5e9d40ecd926a6f500919e4c7e1480de ""
+  "/usr/share/texlive/texmf-dist/tex/latex/cclicenses/cclicenses.sty" 1190587491 4225 a1be0bbd8b5d331922d63e0112439580 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/chngcntr/chngcntr.sty" 1525297854 4336 84bc4a8edb126e69abec1a67dc0c36cf ""
+  "/usr/share/texlive/texmf-dist/tex/latex/cite/cite.sty" 1425427964 26218 19edeff8cdc2bcb704e8051dc55eb5a7 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty" 1579991033 13886 d1306dcf79a944f6988e688c1785f9ce ""
+  "/usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty" 1274111957 27261 5ae6156674330dc345adb79b6e5d8966 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty" 1548974385 11128 a53805799bebfed6358fc1658a18e41f ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg" 1459978653 1213 620bba36b25224fa9b7e1ccb4ecb76fd ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg" 1465944070 1224 978390e9c2234eab29404bc21b268d1e ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def" 1515537368 17334 520b9b85ad8a2a48eda3f643e27a5179 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty" 1580683321 7107 12f1c5ba3c6e4a1dde3cb5a3ae4b2cd1 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty" 1580683321 16932 04729abe63b66ec59ea56edcd722b058 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty" 1580683321 9067 1b996612394a52e1efe89c8bfe8a5892 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty" 1580683321 2590 e3b24ff953e5b58d924f163d25380312 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics/rotating.sty" 1580683321 6982 df2e03ed1b101065d688af501de0405d ""
+  "/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty" 1580683321 3976 d7fa7d81d2870d509d25b17d0245e735 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/hycolor/hycolor.sty" 1580250785 17914 4c28a13fc3d975e6e81c9bea1d697276 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def" 1579642962 50630 3d9728faf8630190cf601ce2cbe470d9 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty" 1579642962 238752 60dd338d71b6a4ab2192131f73dc908b ""
+  "/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty" 1579642962 13244 0070bcab7b5a88187847128d22faf4d8 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def" 1579642962 14134 32b36577d311ddb6522413c7581ee968 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/kvoptions/kvoptions.sty" 1575152344 22520 c4c2dab203104295e1e618be7e5c0f5b ""
+  "/usr/share/texlive/texmf-dist/tex/latex/l3backend/l3backend-pdfmode.def" 1580854751 25404 9d60f463a00d154207ec0048dee27cf0 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg" 1279039959 678 4792914a8f45be57bb98413425e4c7af ""
+  "/usr/share/texlive/texmf-dist/tex/latex/layouts/layouts.sty" 1252025554 103628 f0d6a23a8bf6863780e994d496016c62 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/letltxmacro/letltxmacro.sty" 1575499565 5766 13a9e8766c47f30327caf893ece86ac8 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg" 1568236792 1830 bbaba8afaf42cc048ec4d4ff73467521 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty" 1568236792 80511 830f3f1d3ab7448dd84233e9c2f6462c ""
+  "/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty" 1568236792 204271 6a0ce6b8dafb6c4a13b9036ab1717c77 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty" 1568236792 77022 32914f01b528131c47be2a1040d3856d ""
+  "/usr/share/texlive/texmf-dist/tex/latex/morefloats/morefloats.sty" 1437606073 40388 14d2f45ee504fe2bfb67bfbea24e0cee ""
+  "/usr/share/texlive/texmf-dist/tex/latex/ntheorem/ntheorem.sty" 1346969955 43120 799f06af91d8fb275749981ca21a5146 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/paralist/paralist.sty" 1485124581 14857 82c76ebe8f06becf69ab309565b2a0cb ""
+  "/usr/share/texlive/texmf-dist/tex/latex/pdftexcmds/pdftexcmds.sty" 1574631863 19963 36fd8e818f9f0f32e2db8413d4970122 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/refcount/refcount.sty" 1576624809 9878 9e94e8fa600d95f9c7731bb21dfb67a4 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/rerunfilecheck/rerunfilecheck.sty" 1575674187 9715 b051d5b493d9fe5f4bc251462d039e5f ""
+  "/usr/share/texlive/texmf-dist/tex/latex/seqsplit/seqsplit.sty" 1155399262 1346 2729ac6e87ab535b7428c6807dace823 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/subfig/subfig.sty" 1158586182 21369 9ef165ca6df8815c92e693146a376c92 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/tools/theorem.sty" 1580683321 4957 8d2aa52276e059af562970cda848b5b1 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/tools/varioref.sty" 1580683321 36692 fa125469c111046ecdf3717a9ba7ff20 ""
+  "/usr/share/texlive/texmf-dist/tex/latex/url/url.sty" 1388531844 12796 8edb7d69a20b857904dd0ea757c14ec9 ""
+  "/usr/share/texlive/texmf-dist/web2c/texmf.cnf" 1581979058 38841 ce3692aa899bb693b90b87eaa5d4d84e ""
+  "/usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-t1.enc" 1565080000 2971 def0b6c1f0b107b3b936def894055589 ""
+  "/usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-ts1.enc" 1565080000 2900 1537cc8184ad1792082cd229ecc269f4 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfbx0900.pfb" 1604539918 143961 201304b65f97bc643fbd0bcf0685d1fe ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfbx1095.pfb" 1604539918 154600 ea54091d31de803b613ba9e80ca51709 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfbx1200.pfb" 1604539918 140176 d4962f948b4cc0adf4d3dde77a128c95 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfbx1440.pfb" 1604539918 135942 859a90cad7494a1e79c94baf546d7de5 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfbx2074.pfb" 1604539918 140194 627cc7f36c05b80e25d178974ccb3442 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfbx2488.pfb" 1604539918 135938 299ac3a69892db3b7674a8b2543b0a77 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfrm0600.pfb" 1604539918 162624 9dcc92cd3b1dfe2ecc80e6da7f2eb6bd ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfrm0800.pfb" 1604539918 164227 3df942b4ff2124425d8fb1b6d3e01c7a ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfrm0900.pfb" 1604539918 149037 995a6f1e12c1d647b99b1cf55db78699 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfrm1000.pfb" 1565080000 138258 6525c253f16cededa14c7fd0da7f67b2 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfrm1095.pfb" 1604539918 145929 f25e56369a345c4ff583b067cd87ce8e ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfsi1095.pfb" 1604539918 106965 72348192f7f7f7c44b4558f2996b4879 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfss1095.pfb" 1604539918 97272 e31c1319e3ff43b442c57e2c8f2acc52 ""
+  "/usr/share/texmf/fonts/type1/public/cm-super/sfti1095.pfb" 1604539918 196446 8fbbe4b97b83e5182def6d29a44e57fb ""
+  "/usr/share/texmf/web2c/texmf.cnf" 1581979058 38841 ce3692aa899bb693b90b87eaa5d4d84e ""
+  "/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map" 1604540077 4770781 1ed1abab22da9c3e2cc82e4db562318b ""
+  "/var/lib/texmf/web2c/pdftex/pdflatex.fmt" 1604540101 8258883 e8330f8aa4fe7c6cdcf08bf0b72237fd ""
+  "floss-arduino.OpenModelicad" 1621802120 2789 9346b21408e20d1eb1d7ad7bc865ea4a "pdflatex"
+  "floss-arduino.ard" 1621802120 2334 7b81c8e314a1b1d6aae002014628d2fc "pdflatex"
+  "floss-arduino.aux" 1621802120 182140 ee9595098d56a4e444d4f84928d16bcf "pdflatex"
+  "floss-arduino.bbl" 1621802069 3903 02b5ac06a1bbf3155ccc47bfd4f7ca51 "bibtex floss-arduino"
+  "floss-arduino.cod" 1621802120 2825 276799433ef5d04c78cca67d0f03a29a "pdflatex"
+  "floss-arduino.ind" 1621802059 288 1367e08b6f5cfc1c1a3f8718570f0de1 "makeindex floss-arduino.idx"
+  "floss-arduino.juliad" 1621802120 2664 2b729ddd3bfcbb7f0de365377dfe158c "pdflatex"
+  "floss-arduino.lof" 1621802120 16546 a69af27cf20c15c3f950b4f345da4dcd "pdflatex"
+  "floss-arduino.lot" 1621802120 4425 0291e4f82d9ea3862b2d8768da59d56f "pdflatex"
+  "floss-arduino.out" 1621802120 16111 5b3e12da3b8f1fd705d7aea671c7b61f "pdflatex"
+  "floss-arduino.pyd" 1621802120 2593 f6953c6c110126e07da216023e95df49 "pdflatex"
+  "floss-arduino.tex" 1621802252 6985 1c71aec5ffafba23a5356a68d74c9d8e ""
+  "floss-arduino.toc" 1621802120 21127 eada96d50d5c96a37899a7b73bebcea9 "pdflatex"
+  "suppl/acr.tex" 1615963613 1926 fd6481c4666ee0d60331b7d4cc24b645 ""
+  "suppl/intro.tex" 1621801612 4603 c52cee9f2420b8014f6dce1a41241fa2 ""
+  "suppl/styles.tex" 1615963613 8143 aa3280f0b59c8631fe8ec44895c9e871 ""
+  "tools/floss-firmware/floss-firmware.ino" 1620088994 34359 32a40397062276bb3dcecda801db076e ""
+  "tools/julia/test_firmware.jl" 1619056276 168 3aaf8bf98ff271a626085f256b5bbbc9 ""
+  "tools/openmodelica/windows//test_firmware.mo" 1619499532 616 087d18e8525d7f7e7b49bc700b2d08e4 ""
+  "tools/python/test_firmware.py" 1619660611 702 075224ba07fdcb46e41c20e2e4c001be ""
+  "tools/scilab/test_firmware.sce" 1619392691 121 068cb1b11cc5bef7c9f9ddaa09316c22 ""
+  "tools/shield/pcb_board_V1p2.png" 1618469943 114643 13d3ee33823ec2c138265f5f4daf35c8 ""
+  "tools/shield/shield-V1p2.jpg" 1618469645 221681 3be329dcc0590284c83508bfc96ede10 ""
+  "tools/shield/shield-V1p2.png" 1618470019 66281 607473e0cfda2ff4b7f6c85d1bbb8ba5 ""
+  "user-code/dcmotor/OpenModelica/dcmotor-both.mo" 1620088994 1086 a156cd2ac05b581b0e2a0d6daa70642f ""
+  "user-code/dcmotor/OpenModelica/dcmotor-clock.mo" 1620088994 1002 e95685106fe5e50eba4824e6b0119bd5 ""
+  "user-code/dcmotor/OpenModelica/dcmotor-loop.mo" 1620088994 1237 a8426d0f501ac4c2571d5c9d567948b3 ""
+  "user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino" 1620088994 504 8a85b1257282a49f134cec02b30182e2 ""
+  "user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino" 1620088994 426 6316038efc09b67c75c077917c40e3e4 ""
+  "user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino" 1620088994 665 a13b061f7e773a0ff7e178ed73915282 ""
+  "user-code/dcmotor/dcmotor-OM.tex" 1621455775 11241 982246ee49a10c44361808ce84762a47 ""
+  "user-code/dcmotor/dcmotor-base.tex" 1621729803 11770 fb33750e88fbae0f4074559c505d396b ""
+  "user-code/dcmotor/dcmotor-julia.tex" 1621455775 7297 f523e59616d249643cd2aece01846f9a ""
+  "user-code/dcmotor/dcmotor-python.tex" 1621730532 8723 3ab8a8441aa6ae3554432967fb90c5a3 ""
+  "user-code/dcmotor/dcmotor-scilab.tex" 1621729803 24568 97daad3cd28a25992255315583db4e3c ""
+  "user-code/dcmotor/figures/dc_motor_description.jpg" 1615963613 694440 a424c50ad327bc459a4ab4808f398262 ""
+  "user-code/dcmotor/figures/dcmotor-both.png" 1620285295 107985 6c7508b957f7980eea96e374fc266250 ""
+  "user-code/dcmotor/figures/dcmotor-clock.png" 1620285333 127858 2fa567ed8934ca422ee86d50d1d5545f ""
+  "user-code/dcmotor/figures/dcmotor-loop.png" 1620285372 105062 026f713ad0fe348d43acd5f25ba6f933 ""
+  "user-code/dcmotor/figures/dcmotor_board.png" 1615963613 114406 92155ec29d259e5fcda6bce5c6b08004 ""
+  "user-code/dcmotor/figures/schematic.png" 1615963613 29144 971dcba68f6e79a1c3c5777dac2627ea ""
+  "user-code/dcmotor/figures/uno-pwm.jpg" 1620309722 3266094 71ed00a219ac59152d8c597e1e8856d3 ""
+  "user-code/dcmotor/julia/dcmotor-both.jl" 1620088994 270 2a8057cb974830a91cb2ccaaeaeec8d3 ""
+  "user-code/dcmotor/julia/dcmotor-clock.jl" 1620088994 223 18e184ba00cf35946e451fb37590725a ""
+  "user-code/dcmotor/julia/dcmotor-loop.jl" 1620088994 342 a624b9b98fc1787face9e2a5cc07f84f ""
+  "user-code/dcmotor/python/dcmotor-both.py" 1620088994 864 275cefa529d28743b47a46b87b31ff91 ""
+  "user-code/dcmotor/python/dcmotor-clock.py" 1620285183 830 e4bb3de5e98eb204a3dada5009db8343 ""
+  "user-code/dcmotor/python/dcmotor-loop.py" 1620285183 968 97af73f5b57d7b510ecd4383c3bc4f93 ""
+  "user-code/dcmotor/scilab/dcmotor-both.sce" 1620088994 478 628af43e0c3f08f643098a596ad835cf ""
+  "user-code/dcmotor/scilab/dcmotor-clock.sce" 1620088994 358 714e3d2a3677b19a80dcc181cadf6e4d ""
+  "user-code/dcmotor/scilab/dcmotor-loop.sce" 1620088994 624 72d01e150c668c28e3823b3ff124a6f1 ""
+  "user-code/hw-env/figures/OSHW-138px.png" 1615963613 8171 62fe0090b5a01299adb7fb7b4d9ac130 ""
+  "user-code/hw-env/figures/arduino-3d-printer.jpg" 1615963613 39052 6dff9ea86aa1541b274437fe913ddd46 ""
+  "user-code/hw-env/figures/arduino-ide.jpg" 1615963613 194767 bfef476ab04769e6b222de9ff24a9623 ""
+  "user-code/hw-env/figures/arduino-phone.jpg" 1615963613 135255 4b4165291b755b12ce897d7a408f2d6d ""
+  "user-code/hw-env/figures/arduino.png" 1615963613 149178 70a98357748236149bf214d5d18b33f6 ""
+  "user-code/hw-env/figures/hw-device-manager.jpg" 1615963613 123199 593d451c63d150854f6e8f091ae0b56b ""
+  "user-code/hw-env/figures/lily.jpg" 1615963613 74607 a5cc307933e091ab5da6b90172f6ddd9 ""
+  "user-code/hw-env/figures/mega.jpg" 1615963614 1075629 4343e24216f3e871b746baab98dc92b5 ""
+  "user-code/hw-env/figures/miccontblk.png" 1615963614 32073 d40dc886413fc19a7f28ed042cb42be3 ""
+  "user-code/hw-env/figures/resolution.png" 1615963614 4945 8c36e13a636f064fe99a32583bd5a09f ""
+  "user-code/hw-env/figures/shield-crop.jpg" 1615963614 88724 a405ddfd57bdc79018c6674fc399d67f ""
+  "user-code/hw-env/figures/update-driver.png" 1615963614 40170 607a1cd06856f1eecd42ebc14fbe2daf ""
+  "user-code/hw-env/hw-env.tex" 1621495809 22147 0d8258cc2e1382f1c7f63eb72c73902e ""
+  "user-code/ldr/OpenModelica/ldr-led.mo" 1620088994 1175 513f4a0dc313bc054f4bb8abe75f73fa ""
+  "user-code/ldr/OpenModelica/ldr-read.mo" 1620088994 860 b6de0b97782c2153052b43d45ca918a2 ""
+  "user-code/ldr/arduino/ldr-led/ldr-led.ino" 1620088994 355 3a0bb525b88842f2c29277bfae805ace ""
+  "user-code/ldr/arduino/ldr-read/ldr-read.ino" 1620088994 230 f00bce053f207cda3fe5d9efb50b244f ""
+  "user-code/ldr/figures/LDR-led.png" 1617898904 240349 523edd11a7bcb1002c01b0410de0183e ""
+  "user-code/ldr/figures/LDR.png" 1618126813 222329 b099f728f89ec6e9e39f2222e410488c ""
+  "user-code/ldr/figures/ldr-conn.png" 1615963614 27006 651850b554b0e5f042da89db408bd75e ""
+  "user-code/ldr/figures/ldr-led-2.png" 1619906121 136223 7b7c3b7364cc3325f23880eb53d878c2 ""
+  "user-code/ldr/figures/ldr-led-read-plot.png" 1619903996 24035 ed0d5139439de9ae01beed624c24c5ba ""
+  "user-code/ldr/figures/ldr-read-plot.png" 1619903662 24848 8d7361073a2c28de3752da61df946a24 ""
+  "user-code/ldr/figures/ldr-read-xcos.PNG" 1615963614 34063 b0eeeea9642553ea0bb2889cb52cfa60 ""
+  "user-code/ldr/figures/ldr.jpg" 1615963614 4060 da1140b101edcf75176b3dfbb765dd42 ""
+  "user-code/ldr/figures/ldr_sym.png" 1615963614 29267 73b70e220429569a98caa86348349aa1 ""
+  "user-code/ldr/julia/ldr-led.jl" 1620088994 328 c56b41b79308edfeac581824b292db8e ""
+  "user-code/ldr/julia/ldr-read.jl" 1620088994 182 f022609c62ce20cd8a544b56bb24b920 ""
+  "user-code/ldr/ldr-OM.tex" 1621455775 4330 bf71650135097470010dee6009bf2f2c ""
+  "user-code/ldr/ldr-base.tex" 1621455775 10370 2dc790d6cd4dee2eed4edccdf2dc929f ""
+  "user-code/ldr/ldr-julia.tex" 1621455775 3871 b16ec475383e1331a08b220b22f13fdb ""
+  "user-code/ldr/ldr-python.tex" 1621455775 4576 9bdb80c78c973ef430c00fe2d2ce719b ""
+  "user-code/ldr/ldr-scilab.tex" 1621455775 13462 ffeb0049b804a21e1f86c11a37113738 ""
+  "user-code/ldr/python/ldr-led.py" 1620088994 878 6fd4249dccee88b68be9f42ac32e1238 ""
+  "user-code/ldr/python/ldr-read.py" 1620088994 690 e0b7ce7fda0fd80b7a9910b066c54ef1 ""
+  "user-code/ldr/scilab/ldr-led.sce" 1620088994 485 06b1e7a58af58334a9e0deed47713a69 ""
+  "user-code/ldr/scilab/ldr-read.sce" 1620088994 383 672cc7539820df32f3a25b93cc0f4fa7 ""
+  "user-code/led/OpenModelica/led-blue-delay.mo" 1620022023 974 b66fe8fce6005b87afc23c6d7d3009e5 ""
+  "user-code/led/OpenModelica/led-blue-red.mo" 1620022023 1154 7e5164d0b0a78fcd7a6327bbfff835c9 ""
+  "user-code/led/OpenModelica/led-blue.mo" 1620022023 802 063ab42c583ad7e9203c09fdac11beb2 ""
+  "user-code/led/OpenModelica/led-green-blink.mo" 1620022023 1098 58f96b5892b748dbca27a4411f54fd08 ""
+  "user-code/led/arduino/led-blue-delay/led-blue-delay.ino" 1619653754 134 a265af0df0c837b3860a1bd8f4f17db3 ""
+  "user-code/led/arduino/led-blue-red/led-blue-red.ino" 1619653892 215 db5fdea678579e2b65dbcaddcca033c6 ""
+  "user-code/led/arduino/led-blue/led-blue.ino" 1619653669 99 25f30fcd7cc7d7b6b9aa222deff00437 ""
+  "user-code/led/arduino/led-green-blink/led-green-blink.ino" 1619653924 375 d859b4f26e521d4c1afe19f92c8a1ebe ""
+  "user-code/led/figures/arduino-new-shield.jpeg" 1619681259 404878 627d5ed86bf3271cb2aed2af239e8339 ""
+  "user-code/led/figures/led-blue-com-2.png" 1619723929 118844 76197f2f2d54e9f24ff5133feb6b20e4 ""
+  "user-code/led/figures/led-blue-delay-com-2.png" 1619723721 131759 39ca1a34902244e390493719e5e5afa9 ""
+  "user-code/led/figures/led-blue-red-com-2.png" 1619723965 139836 8e4b4cfd07c210053264e34bfa61d292 ""
+  "user-code/led/figures/led-green-blink-com-2.png" 1619724068 145226 f748b57a3aedec908e67f4a2a063f94b ""
+  "user-code/led/figures/led.png" 1615963614 3299 6fdaa5be1f5df2c4fa3cc404b111c357 ""
+  "user-code/led/figures/led_output.png" 1615963614 4933000 3daaef0abe81c66166eaa3fd911c9b66 ""
+  "user-code/led/figures/rgb-led-bb.png" 1617583787 241915 7c5374def5f441085b2d93294dde7979 ""
+  "user-code/led/figures/schematic.png" 1615963614 34562 2b5d2cb148a99242ffb4343097ced0a0 ""
+  "user-code/led/julia/led-blue-delay.jl" 1619663062 213 dd9c8a8b157baac9432478c33b8aa14e ""
+  "user-code/led/julia/led-blue-red.jl" 1620022023 332 919a1421675457207ff70ee12da93ac6 ""
+  "user-code/led/julia/led-blue.jl" 1619662025 170 c9cc13e4fb6e898855537bb9e1f2a787 ""
+  "user-code/led/julia/led-green-blink.jl" 1619663087 249 d785472e844af87c34e32322ccb211e2 ""
+  "user-code/led/led-OM.tex" 1621455775 6090 eeb3656cf34ca23b4e74568da8ba3a8f ""
+  "user-code/led/led-base.tex" 1621455775 12573 9ca1a36290acd21f7147bf1579e43aec ""
+  "user-code/led/led-julia.tex" 1621455775 4230 113d65c42a2badd946d2f312a0e216ca ""
+  "user-code/led/led-python.tex" 1621730532 8163 ab9aceb1edd0b85ce2df3d9da772f2e5 ""
+  "user-code/led/led-scilab.tex" 1621455775 15554 57a47400c55d0e67271b6cd2a300cc7e ""
+  "user-code/led/python/led-blue-delay.py" 1619660150 805 9c5bde89850fc3b25ced778dfafe1dcf ""
+  "user-code/led/python/led-blue-red.py" 1619660175 1039 339cefbe997737f931646cba049b8d12 ""
+  "user-code/led/python/led-blue.py" 1619658381 723 be6248a455119500e6930030c0c92250 ""
+  "user-code/led/python/led-green-blink.py" 1620022023 800 7d238166a3ec7776881175fdee95f619 ""
+  "user-code/led/scilab/led-blue-delay.sce" 1619654724 306 971bfdb5febffab85ff7e39d9486f19f ""
+  "user-code/led/scilab/led-blue-red.sce" 1619654755 534 9ed44e179f5f8f2d1833438c6e950670 ""
+  "user-code/led/scilab/led-blue.sce" 1619654435 264 54ed7e9095e17363e0ce5fb00cade1d1 ""
+  "user-code/led/scilab/led-green-blink.sce" 1619654799 484 6075a3408ac416b1a08b9812441b114f ""
+  "user-code/modbus/OpenModelica/readCurrent.mo" 1615963614 415 303989413cadae961b297f9b27e7fea0 ""
+  "user-code/modbus/OpenModelica/readPower.mo" 1615963614 435 3f5615fb24b7ddbe58cdd8e1bef132ae ""
+  "user-code/modbus/OpenModelica/readVoltage.mo" 1615963614 415 6e1ebbf05cf22f407c8164397a270067 ""
+  "user-code/modbus/arduino/send_packet.ino" 1615963614 8116 cf6c7187b76c359b0e96b2d6ab867417 ""
+  "user-code/modbus/figures/Full-Set-Up.png" 1615963614 1614647 0b0a3133138b7b5e4362f127b21dbbca ""
+  "user-code/modbus/figures/active-power-output-setup.jpg" 1620364402 970986 3c5dcb7d7a8cc8c4506feed7894ca347 ""
+  "user-code/modbus/figures/active-power-output.png" 1620364605 6070 e338cbd838bd2ffe7cb999dccd6c8af4 ""
+  "user-code/modbus/figures/arduino_code_flowchart.png" 1615963614 30551 d5d6d0068508ecc437e64b129d03adeb ""
+  "user-code/modbus/figures/block-diagram.PNG" 1615963614 12984 34da68fad73a956dd18a72f2742c01c8 ""
+  "user-code/modbus/figures/current-output-setup.jpg" 1620364431 852771 a15f31abba4a1197ad1aabfc7084a9ac ""
+  "user-code/modbus/figures/current-output.png" 1620364623 5616 8e6b1ab6c0719055cc81fd1f0ab7e6b6 ""
+  "user-code/modbus/figures/fig1.png" 1615963614 7589 f96d8da2f8a9b651e6a2b84ff0fcd2b5 ""
+  "user-code/modbus/figures/fig2.png" 1615963614 8357 df83830062ead3aba95548cffc6e5fc2 ""
+  "user-code/modbus/figures/fig3.png" 1615963614 64436 45a719b4c6c25010861af86e20af0675 ""
+  "user-code/modbus/figures/flowchart.png" 1615963614 24159 a806f9f56a4606c9f0640bb0eb7e36ff ""
+  "user-code/modbus/figures/read_value_xcos.png" 1615963614 51074 2267729983ef5dcb788a3f74130a179a ""
+  "user-code/modbus/figures/voltage-output-setup.jpg" 1620364476 964103 77691bdec7885f306d9af858aa024c6b ""
+  "user-code/modbus/figures/voltage-output.png" 1620364640 5506 102a213a2a607379d826356f732ad44e ""
+  "user-code/modbus/julia/readCurrent.jl" 1615963614 419 d37bba6d385680f69e39aeeeee270cc2 ""
+  "user-code/modbus/julia/readPower.jl" 1615963614 408 5fe8daf1c8116370b28ad3bd3f32aab4 ""
+  "user-code/modbus/julia/readVoltage.jl" 1615963614 418 4e26e56e234bd7df4a03ade0f2866654 ""
+  "user-code/modbus/modbus-OM.tex" 1621726901 3802 a14f05ea05ae4e3b524b3e454bdd061b ""
+  "user-code/modbus/modbus-base.tex" 1621726747 25043 4680a3bbf2f6f29953d197452175127a ""
+  "user-code/modbus/modbus-julia.tex" 1621726880 5413 9858b932ddf107268b38882b8d3b8f13 ""
+  "user-code/modbus/modbus-python.tex" 1621726837 5818 54ac697aae0be2a3a941c4567aac8346 ""
+  "user-code/modbus/modbus-scilab.tex" 1621726814 12337 243a65054fa901e3aacee64857c7cba6 ""
+  "user-code/modbus/python/read_active_power.py" 1615963614 1107 5c75379ec91b5b117fc94be55100a639 ""
+  "user-code/modbus/python/read_current.py" 1615963614 1102 c628a8be5444f9b5ffbb348dff567336 ""
+  "user-code/modbus/python/read_voltage.py" 1618777541 1102 cf711c7b2bc93043409419eb1ae2169b ""
+  "user-code/modbus/scilab/read_active_power.sci" 1615963614 1072 ec17d07cbbf336756ed22d5469b68e25 ""
+  "user-code/modbus/scilab/read_current.sci" 1615963614 1090 97c84be93c41f56ed4617dfe2ffaf5bb ""
+  "user-code/modbus/scilab/read_val.sce" 1615963614 1474 89f368fad786acfa64c8f7eab2d6c14a ""
+  "user-code/modbus/scilab/read_voltage.sci" 1619050548 1100 00726a382c03a31bf874d21d1cc5eb16 ""
+  "user-code/pot/OpenModelica/pot-threshold.mo" 1620088994 1512 1402778c2f3b5ec7f6285466d545e598 ""
+  "user-code/pot/arduino/pot-threshold/pot-threshold.ino" 1620088994 805 12e5e0df10302ea489b57721d004d184 ""
+  "user-code/pot/figures/POT-led-bb.png" 1618126815 243193 63a4dc18807be931f97545bfa9167a30 ""
+  "user-code/pot/figures/pot-threshold-1.png" 1619921513 127870 911e5afafb8a33b220cf66889fac91d7 ""
+  "user-code/pot/figures/potmeter.png" 1615963614 99691 b56662d8570cfc9c91c52b76f21d1802 ""
+  "user-code/pot/figures/schematic.png" 1615963614 24453 85099648f5c8e616d3cfd5f3d6d7a7bf ""
+  "user-code/pot/julia/pot-threshold.jl" 1620088994 666 9b730ca97ed22ec8050aa381d4161447 ""
+  "user-code/pot/pot-OM.tex" 1621455775 2428 e00a4a0fc2dde69645883e0e161cb41d ""
+  "user-code/pot/pot-base.tex" 1621455775 8733 cbe2103c1242a714ed3fd639d1ba04a1 ""
+  "user-code/pot/pot-julia.tex" 1621455775 2031 630ec4debd43acbd61d1ef9bc938efa5 ""
+  "user-code/pot/pot-python.tex" 1621455775 2221 bbe65be48f47a22445f193c34eece033 ""
+  "user-code/pot/pot-scilab.tex" 1621455775 5204 cd6a7e9a7e6bd742cf06e77bfb7c1797 ""
+  "user-code/pot/python/pot-threshold.py" 1620088994 1230 800d4698ea9b0e37651e65fc06cded76 ""
+  "user-code/pot/scilab/pot-threshold.sce" 1620088994 697 c4b81a0bfec8d4d932692e85bdaa44b4 ""
+  "user-code/push/OpenModelica/led-push-button.mo" 1620023350 1226 c823f27eb8ddafbc85d7beeeab95e952 ""
+  "user-code/push/OpenModelica/push-button-status.mo" 1620022023 1002 404445ef6477d66c90debf67d0b16ff5 ""
+  "user-code/push/arduino/led-push-button/led-push-button.ino" 1620022023 500 74749a5bf90b0b8730fac1c5c2d2098e ""
+  "user-code/push/arduino/push-button-status/push-button-status.ino" 1620022023 399 8bc698528184374bd12aa2bd7447ae54 ""
+  "user-code/push/figures/led-push-button.PNG" 1615963614 29100 9fb97725008a4f858830924290bafd86 ""
+  "user-code/push/figures/push-button-status.PNG" 1615963614 27403 da6c41bb605a3801512422bfefcaf4ea ""
+  "user-code/push/figures/pushbutton-conn.png" 1615963614 25321 c2e109dc82f76507b9a0b5f6e09be7db ""
+  "user-code/push/figures/sci-ard-meter.png" 1619834247 14461 903bc95446fd86d03d6cd50e9801d91d ""
+  "user-code/push/figures/switch-led.png" 1617880501 240149 ad9fa2cc65d176482fbdf38c633d826f ""
+  "user-code/push/figures/switch.png" 1617880485 220988 2689323a6f7a00d63e81ef7abb52961a ""
+  "user-code/push/julia/led-push-button.jl" 1620022023 362 d6ece80fbd90baec0c77d842796ce55f ""
+  "user-code/push/julia/push-button-status.jl" 1620022023 220 ee74db42ff4cafa9fdfa53bf629610f7 ""
+  "user-code/push/push-OM.tex" 1621727592 4349 85113378082d662185f92f82c31e0052 ""
+  "user-code/push/push-base.tex" 1621455775 9542 58b98694b202c0c277d28136f2a40af6 ""
+  "user-code/push/push-julia.tex" 1621455775 3532 267ddf5e111076677bf4ab39ae1aca08 ""
+  "user-code/push/push-python.tex" 1621455775 3501 2725b30124fa209b5fc6b05fcc5a5f18 ""
+  "user-code/push/push-scilab.tex" 1621455775 8452 cbce9e9caa2c44eeb4f75cc7288a3653 ""
+  "user-code/push/python/led-push-button.py" 1620090903 840 7ac297fea9149dd4f1097d1eb1127438 ""
+  "user-code/push/python/push-button-status.py" 1620022023 726 f8a32147aae8c969c2bd3a7634370342 ""
+  "user-code/push/scilab/led-push-button.sce" 1620022023 395 ffd3626904bd116d49ebbbd9ba896f6c ""
+  "user-code/push/scilab/push-button-status.sce" 1620022023 374 60eb3a3f4806ea383dadee5441f2be98 ""
+  "user-code/servo/OpenModelica/servo-init.mo" 1620332448 843 9bcc28dfc460db6e1f1e16e9450b2e32 ""
+  "user-code/servo/OpenModelica/servo-loop.mo" 1620332461 1063 f214713878cab8f7ac1b10091485a135 ""
+  "user-code/servo/OpenModelica/servo-pot.mo" 1620332469 1327 9ab722a57ce5d891d9a52873e26a6f5a ""
+  "user-code/servo/OpenModelica/servo-reverse.mo" 1620332477 1034 779a75c4a7d778029a081e506455685c ""
+  "user-code/servo/arduino/servo-init/servo-init.ino" 1620088994 295 65f0ac74c87b7c1934dc586d83ab0efe ""
+  "user-code/servo/arduino/servo-loop/servo-loop.ino" 1620298217 402 c218fcd4caeb348d81352b676dc5c541 ""
+  "user-code/servo/arduino/servo-pot/servo-pot.ino" 1620088994 671 145aea71e1ac2ef50822eb25d83108d6 ""
+  "user-code/servo/arduino/servo-reverse/servo-reverse.ino" 1620088994 331 5305061778c867a1ac20fee4fa50e995 ""
+  "user-code/servo/figures/servo-bb.png" 1620292542 225975 568cf3b00806f2ae8562b2af9fe5a249 ""
+  "user-code/servo/figures/servo-init.png" 1615963614 26415 598a8cb33dbe09dbd1edc7b8735f4816 ""
+  "user-code/servo/figures/servo-loop.png" 1615963614 32952 67f7dd0d2bb32be2b1c48f217b17c189 ""
+  "user-code/servo/figures/servo-pot-bb.png" 1620292534 236985 d6100121102ec6696c76eb30db17b3c0 ""
+  "user-code/servo/figures/servo-pot.png" 1615963614 33204 436709fd3e5dbedb22b8af8b2d2ca4ba ""
+  "user-code/servo/figures/servo-reverse.png" 1615963614 25147 1703152c1e98c6000e54589b6bd467a7 ""
+  "user-code/servo/figures/servo-uno-shield.jpg" 1620292964 4433005 1ca49ed870fd1a7d92392a6aa2c053f6 ""
+  "user-code/servo/julia/servo-init.jl" 1620088994 174 2f1751adbcd50ad10fb1fc63b126c50d ""
+  "user-code/servo/julia/servo-loop.jl" 1620088994 244 02733944ad3e8beb0aece530a7ff2325 ""
+  "user-code/servo/julia/servo-pot.jl" 1620088994 325 6b14ad4d9b9f190780bb5ba37b9794ae ""
+  "user-code/servo/julia/servo-reverse.jl" 1620088994 218 c8fb1faf7cc98344286dc9a6e095195f ""
+  "user-code/servo/python/servo-init.py" 1620088994 757 4bdf2886e706c11615812d5f505b864d ""
+  "user-code/servo/python/servo-loop.py" 1620088994 802 35d9aee2d082ddc1b9893af2c440c092 ""
+  "user-code/servo/python/servo-pot.py" 1620088994 863 8c8e4066fa8337d37afce0795cd68e84 ""
+  "user-code/servo/python/servo-reverse.py" 1620088994 825 af6e0576f7e25e769305c3821e8fd920 ""
+  "user-code/servo/scilab/servo-init.sce" 1620088994 329 0f8c9cd741b741d412b27aabb0b641da ""
+  "user-code/servo/scilab/servo-loop.sce" 1620088994 525 6a4902117c83c5390c1877a95a5e363e ""
+  "user-code/servo/scilab/servo-pot.sce" 1620088994 530 2d82664fdd3a16c6588b2a4dc4e66a22 ""
+  "user-code/servo/scilab/servo-reverse.sce" 1620088994 532 11110ec91f2ddb2261afbbec00198d94 ""
+  "user-code/servo/servo-OM.tex" 1621455775 6743 e3bb3333e0e297defe427b0d2a0ab5c0 ""
+  "user-code/servo/servo-base.tex" 1621455775 13398 42be6b1599117acc4dcfc2645741fed1 ""
+  "user-code/servo/servo-julia.tex" 1621455775 6393 f5b5c76dbc63b086b6593dc5c1d3e5a2 ""
+  "user-code/servo/servo-python.tex" 1621455775 9390 e10fc3c7c70de72eb1cbcf10b7342863 ""
+  "user-code/servo/servo-scilab.tex" 1621455775 17336 d4a14c40c81913ae60506458a1cf945a ""
+  "user-code/sw-env/figures/OMEdit-UI.png" 1618566985 1412111 17b388a3069a3685b7d14c6fb67ee8eb ""
+  "user-code/sw-env/figures/OMEdit-libraries.png" 1617394693 154031 fd27a1537f6271ab01c53fd1d2c9d214 ""
+  "user-code/sw-env/figures/arduino-palette.png" 1615963614 10751 8229db142816e63c5b5761df7ebf0e33 ""
+  "user-code/sw-env/figures/browse-directory.png" 1615963614 30302 e7161778e4b66145020832ffda95f16b ""
+  "user-code/sw-env/figures/builder.png" 1615963614 62847 a945d2601d325541677f819dda7ee305 ""
+  "user-code/sw-env/figures/clock-blk.png" 1615963614 8341 2796147e1cfe4ae15ff1581cf7347de4 ""
+  "user-code/sw-env/figures/com-properties.png" 1615963614 75092 d364fc390b7b1913845428ff03e09b17 ""
+  "user-code/sw-env/figures/cscope-config.png" 1615963614 15445 4f02500263554c7a25c5355d43fe0720 ""
+  "user-code/sw-env/figures/device-manager-com.png" 1619051516 170869 2521a3958703e2565de76bfdcb864733 ""
+  "user-code/sw-env/figures/device-manager.png" 1615963614 66176 4b944d863a9a68ac712fec18d1072374 ""
+  "user-code/sw-env/figures/julia-download.png" 1619175408 90834 a76f37ce7ab329cff72e393ca325d834 ""
+  "user-code/sw-env/figures/julia-pkg-windows.png" 1619131876 41169 b9da9617cd69c69bb952d9604b7919ec ""
+  "user-code/sw-env/figures/julia-pkg.png" 1618189640 46183 5e4ac4a37a0b2c9bb6b11151ef3ffbbd ""
+  "user-code/sw-env/figures/julia-repl-windows.png" 1619131664 39594 686340edfe0c380de10e1f8ee3af3582 ""
+  "user-code/sw-env/figures/julia-terminal-repl.png" 1618258398 44140 3c889d9ebd5a899a1d28d60ef542f70a ""
+  "user-code/sw-env/figures/julia-windows-install.png" 1619130519 26406 e46da4d14d9b869903f4107320f821e9 ""
+  "user-code/sw-env/figures/launch-arduino-opt.png" 1617392168 33421 f8b38ae30fdf8828bc50d1f0b1b72fe4 ""
+  "user-code/sw-env/figures/linux-cd.png" 1615963614 39093 885ba08c89ecb4d2c400fa4b07d4ea66 ""
+  "user-code/sw-env/figures/linux-port.png" 1615963614 22330 f34b363966c6f589a01e2e3083bf7d90 ""
+  "user-code/sw-env/figures/loader.png" 1615963614 59139 c20511f34e925a6fb5628e3a13c4442a ""
+  "user-code/sw-env/figures/om-modeling-views.png" 1617614171 138971 3676cbc7350ef2f65c828d96b7fb6ce5 ""
+  "user-code/sw-env/figures/om-modeling.png" 1617413556 151173 3000377e285a1c18e6b2e2c50a706348 ""
+  "user-code/sw-env/figures/om-open-model.png" 1617562615 3436700 a7f685410189a7926c1c7ce02eea2324 ""
+  "user-code/sw-env/figures/om-sim-success.png" 1617413099 72125 9017411bfe49b3ef6a4c3d8817ebc532 ""
+  "user-code/sw-env/figures/om-simulate.png" 1617614168 193689 816ffeeb17ad0b184a7c5faf3911ad28 ""
+  "user-code/sw-env/figures/om-text-view.png" 1617412273 225672 29da7c1783940469a04bb6534660b5ff ""
+  "user-code/sw-env/figures/om-toolbox-loaded.png" 1619376662 62386 dcd446cac813a164e5c326d2360928c9 ""
+  "user-code/sw-env/figures/openmodelica-run-anyway.png" 1619317281 52705 7ad6616822b91c117b7208fecfa9759a ""
+  "user-code/sw-env/figures/plot-blk.png" 1615963614 9025 823d55c99e8f9e091c480135e11fed88 ""
+  "user-code/sw-env/figures/python-windows-install.JPG" 1619109598 52113 d8d1a4dbf12dad7489007c03c6aff723 ""
+  "user-code/sw-env/figures/sim-setup.png" 1615963614 18806 fca3d6d4d7692c539f6dd8ee5fca2286 ""
+  "user-code/sw-env/figures/sine-blk.png" 1615963614 31364 922217660a4514750566368a9628caca ""
+  "user-code/sw-env/figures/sine-gen.png" 1615963614 18116 34af55052c486ca14630fa8175b34a20 ""
+  "user-code/sw-env/figures/sine-output.png" 1615963614 5195 b769374644003c54a930b7fd08e2e7ee ""
+  "user-code/sw-env/figures/table_functions_crop.pdf" 1615963614 84671 8377aefb061b0e251291558e34dd4b23 ""
+  "user-code/sw-env/figures/test-console.png" 1615963614 53960 b989b14626fd496e19335d18673cc602 ""
+  "user-code/sw-env/figures/win-command-prompt.png" 1619057483 18481 e5638717dbbb0533251e1adcbc9b10f0 ""
+  "user-code/sw-env/figures/windows-cmd.png" 1619057155 18559 6c4f07f73f86b74127aa8c76e23f3285 ""
+  "user-code/sw-env/figures/xcos-help.png" 1615963614 87275 3c9b5157ebebe381cd7b5281cdd28482 ""
+  "user-code/sw-env/sw-env-OM.tex" 1621452402 14684 246a4e6711439c5535a43c55e6ccdb94 ""
+  "user-code/sw-env/sw-env-base.tex" 1621452092 20371 3831691d48b6edf9faf7d654fa4a9c05 ""
+  "user-code/sw-env/sw-env-julia.tex" 1621731226 17785 1a5d3d2453b52cfd531a90b3cb92a789 ""
+  "user-code/sw-env/sw-env-python.tex" 1621452358 12570 407eb1692224c6bac00b407a35921d83 ""
+  "user-code/sw-env/sw-env-scilab.tex" 1621452275 25295 c66e7c7dfc43d03ad408bc17aeaf13bf ""
+  "user-code/thermistor/OpenModelica/therm-buzzer.mo" 1620088994 1299 e1551a279a3614eeaf9116b1002e12eb ""
+  "user-code/thermistor/OpenModelica/therm-read.mo" 1620088994 882 b7d88b5d1f38eff59552a98507af5858 ""
+  "user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino" 1620088994 436 95759b7a9f40f5df3f6bf578fac78e35 ""
+  "user-code/thermistor/arduino/therm-read/therm-read.ino" 1620088994 222 11d9158a56bc707bb62c21c4112a5ac2 ""
+  "user-code/thermistor/figures/BUZZER-Diagram-crop.pdf" 1615963614 44580 9821d615a59f54c353650c91d53397ff ""
+  "user-code/thermistor/figures/NTC-bead.jpg" 1615963614 26322 dc48012480bf36dffe1bc53f53fff468 ""
+  "user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf" 1615963614 51122 63d1034bfec8c1e50343da5dd4e8a355 ""
+  "user-code/thermistor/figures/therm-buzzer-xcos.png" 1615963614 62520 d7a651c93d11aa2ade2fbcaaae324492 ""
+  "user-code/thermistor/figures/therm-buzzer.png" 1615963614 21991 43392992f62b8fc4acd5d04722ac65ef ""
+  "user-code/thermistor/figures/therm-read-xcos.png" 1615963614 57179 0dddd7d72b0b013c4bca6de583a2bb80 ""
+  "user-code/thermistor/figures/therm-read.png" 1615963614 19495 9e15703acd9c4205b29b15f718ba5669 ""
+  "user-code/thermistor/figures/therm-sym.png" 1615963614 17914 5c4de58664f2c605c14ebafd7187b119 ""
+  "user-code/thermistor/figures/thermistor-buzzer.png" 1617904904 251485 47e52a1b05f033ac5efc513d0c38b843 ""
+  "user-code/thermistor/figures/thermistor.png" 1617904875 227111 a497c7b79fab30a854e897df8f7b9e5a ""
+  "user-code/thermistor/julia/therm-buzzer.jl" 1620088994 361 703362d6f73c2ce36d978a43225a8dbf ""
+  "user-code/thermistor/julia/therm-read.jl" 1620002804 183 640b24fbc4b351c3ad132e1f06e21993 ""
+  "user-code/thermistor/python/therm-buzzer.py" 1620088994 986 0feaddc58806c5744d676064126a7242 ""
+  "user-code/thermistor/python/therm-read.py" 1620002454 748 cba86aade80fa8215987d3707938af4c ""
+  "user-code/thermistor/scilab/therm-buzzer.sce" 1620088994 542 66209c5ab2e09a16efa85ab68a541109 ""
+  "user-code/thermistor/scilab/therm-read.sce" 1619998644 399 3d4d94a3003c16014a51200a9b472b66 ""
+  "user-code/thermistor/thermistor-OM.tex" 1621455775 5413 2604e0806d714fe51411dcf49eb41abd ""
+  "user-code/thermistor/thermistor-base.tex" 1621455775 12060 ceacf10a396b42fe1b4434075deb9129 ""
+  "user-code/thermistor/thermistor-julia.tex" 1621455775 5083 6e773263fd0378465696e28325689b98 ""
+  "user-code/thermistor/thermistor-python.tex" 1621730586 6690 dcd0b9c6629922cc2675da1a8eec8d97 ""
+  "user-code/thermistor/thermistor-scilab.tex" 1621455775 15817 4f8b0a1727ee952a36196e611ce5308c ""
   (generated)
-  "floss-arduino.ard"
-  "floss-arduino.pyd"
-  "floss-arduino.aux"
-  "floss-arduino.idx"
-  "floss-arduino.cod"
+  "floss-arduino.log"
   "floss-arduino.toc"
   "floss-arduino.thm"
+  "floss-arduino.lof"
+  "floss-arduino.idx"
+  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.log"
+  "floss-arduino.cod"
+  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf"
   "floss-arduino.lot"
+  "floss-arduino.juliad"
+  "floss-arduino.pyd"
+  "floss-arduino.aux"
+  "floss-arduino.pdf"
   "floss-arduino.OpenModelicad"
   "floss-arduino.out"
-  "floss-arduino.log"
-  "floss-arduino.lof"
-  "floss-arduino.pdf"
-  "floss-arduino.juliad"
+  "floss-arduino.ard"
diff --git a/floss-arduino.fls b/floss-arduino.fls
index 173e1f8..949f694 100644
--- a/floss-arduino.fls
+++ b/floss-arduino.fls
@@ -1,1442 +1,1463 @@
-PWD /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone
-INPUT /usr/local/texlive/2017/texmf.cnf
-INPUT /usr/local/texlive/2017/texmf-dist/web2c/texmf.cnf
-INPUT /usr/local/texlive/2017/texmf-var/web2c/pdftex/pdflatex.fmt
-INPUT floss-arduino.tex
-OUTPUT floss-arduino.log
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/book.cls
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/book.cls
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/bk11.clo
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/bk11.clo
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/map/fontname/texfonts.map
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr10.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/color.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/color.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/color.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/color.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics-def/pdftex.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics-def/pdftex.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/infwarerr.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/infwarerr.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/layouts/layouts.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/layouts/layouts.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/cclicenses/cclicenses.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/cclicenses/cclicenses.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/rotating.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/rotating.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphicx.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphicx.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/keyval.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/keyval.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphics.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphics.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/trig.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics/trig.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
-INPUT /Users/kannan/Library/texmf/tex/latex/ifthen/ifthen.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/ifthen/ifthen.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/morefloats.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/morefloats.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/paralist/paralist.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/paralist/paralist.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/chngcntr/chngcntr.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/chngcntr/chngcntr.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsmath.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsmath.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amstext.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amstext.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsgen.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsgen.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsbsy.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsbsy.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsopn.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsopn.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/makeidx.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/makeidx.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/fancybox/fancybox.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/fancybox/fancybox.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/cite/cite.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/cite/cite.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hyperref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hyperref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/ifxetex/ifxetex.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/ifxetex/ifxetex.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/auxhook.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/auxhook.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/kvoptions.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/kvoptions.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/pd1enc.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/pd1enc.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/hyperref.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/hyperref.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/url/url.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/url/url.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hpdftex.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hpdftex.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/subfig/subfig.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/subfig/subfig.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption3.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption3.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/listings.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/listings.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstpatch.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstpatch.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/listings.cfg
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/listings.cfg
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/varioref/varioref.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/varioref/varioref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/fontenc.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/fontenc.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/t1enc.def
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/t1enc.def
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1095.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/bera/beramono.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/bera/beramono.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/seqsplit/seqsplit.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/seqsplit/seqsplit.sty
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/suppl/styles.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/suppl/styles.tex
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/ntheorem/ntheorem.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/ntheorem/ntheorem.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty
-INPUT /Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/tools/theorem.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/tools/theorem.sty
-OUTPUT floss-arduino.idx
-INPUT floss-arduino.aux
-INPUT floss-arduino.aux
-OUTPUT floss-arduino.aux
-INPUT /usr/local/texlive/2017/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
-INPUT /usr/local/texlive/2017/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/grfext.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/grfext.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/nameref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/nameref.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/gettitlestring.sty
-INPUT /usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/gettitlestring.sty
-INPUT floss-arduino.out
-INPUT floss-arduino.out
-INPUT floss-arduino.out
-INPUT floss-arduino.out
-OUTPUT floss-arduino.pdf
-INPUT ./floss-arduino.out
-INPUT ./floss-arduino.out
-OUTPUT floss-arduino.out
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm2488.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx2488.tfm
-INPUT floss-arduino.toc
-INPUT floss-arduino.toc
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx1095.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr8.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr6.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi10.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi8.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi6.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy10.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy8.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy6.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmex10.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex8.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex7.tfm
-INPUT /usr/local/texlive/2017/texmf-var/fonts/map/pdftex/updmap/pdftex.map
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecsl1095.tfm
-OUTPUT floss-arduino.toc
-INPUT floss-arduino.lof
-INPUT floss-arduino.lof
-OUTPUT floss-arduino.lof
-INPUT floss-arduino.lot
-INPUT floss-arduino.lot
-OUTPUT floss-arduino.lot
-INPUT floss-arduino.ard
-INPUT floss-arduino.ard
-OUTPUT floss-arduino.ard
-INPUT floss-arduino.cod
-INPUT floss-arduino.cod
-OUTPUT floss-arduino.cod
-INPUT floss-arduino.pyd
-INPUT floss-arduino.pyd
-OUTPUT floss-arduino.pyd
-INPUT floss-arduino.juliad
-INPUT floss-arduino.juliad
-OUTPUT floss-arduino.juliad
-INPUT floss-arduino.OpenModelicad
-INPUT floss-arduino.OpenModelicad
-OUTPUT floss-arduino.OpenModelicad
-INPUT suppl/acr.tex
-INPUT suppl/acr.tex
-INPUT suppl/intro.tex
-INPUT suppl/intro.tex
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm2074.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx2074.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/omscmr.fd
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/omscmr.fd
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0800.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex7.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0600.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0500.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm0900.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmr9.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmmi9.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/cm/cmsy9.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex9.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/bera/t1fvm.fd
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/bera/t1fvm.fd
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm
-INPUT user-code/hw-env/hw-env.tex
-INPUT user-code/hw-env/hw-env.tex
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/vf/public/bera/fvmr8t.vf
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1440.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx1440.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1200.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx1200.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/miccontblk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/miccontblk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/miccontblk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/resolution.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/resolution.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/resolution.png
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecti1095.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/OSHW-138px.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/OSHW-138px.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/OSHW-138px.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/mega.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/mega.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/mega.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/lily.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/lily.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/lily.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-phone.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-phone.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-phone.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-3d-printer.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-3d-printer.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-3d-printer.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/pcb_board_V1p2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/pcb_board_V1p2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/pcb_board_V1p2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/shield-crop.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/shield-crop.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/shield-crop.jpg
-INPUT user-code/sw-env/sw-env-base.tex
-INPUT user-code/sw-env/sw-env-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/hw-device-manager.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/hw-device-manager.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/hw-device-manager.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/device-manager-com.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/device-manager-com.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/device-manager-com.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/update-driver.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/update-driver.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/update-driver.png
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/vf/public/bera/fvmr8t.vf
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/launch-arduino-opt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/launch-arduino-opt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/launch-arduino-opt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-ide.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-ide.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures/arduino-ide.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/floss-firmware/floss-firmware.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/floss-firmware/floss-firmware.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/floss-firmware/floss-firmware.ino
-INPUT user-code/sw-env/sw-env-scilab.tex
-INPUT user-code/sw-env/sw-env-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/linux-cd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/linux-cd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/linux-cd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/browse-directory.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/browse-directory.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/browse-directory.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/builder.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/builder.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/builder.png
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/loader.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/loader.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/loader.png
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/vf/public/bera/fvmr8t.vf
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/device-manager.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/device-manager.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/device-manager.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/com-properties.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/com-properties.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/com-properties.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/linux-port.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/linux-port.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/linux-port.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmware.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmware.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmware.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/test-console.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/test-console.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/test-console.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/table_functions_crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/table_functions_crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/table_functions_crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmware.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmware.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmware.sce
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecbx0900.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/plot-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/plot-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/plot-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/clock-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/clock-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/clock-blk.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-gen.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-gen.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-gen.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sine-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/cscope-config.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/cscope-config.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/cscope-config.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sim-setup.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sim-setup.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/sim-setup.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/arduino-palette.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/arduino-palette.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/arduino-palette.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/xcos-help.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/xcos-help.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/xcos-help.png
-INPUT user-code/sw-env/sw-env-python.tex
-INPUT user-code/sw-env/sw-env-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/python-windows-install.JPG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/python-windows-install.JPG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/python-windows-install.JPG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/windows-cmd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/windows-cmd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/windows-cmd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/win-command-prompt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/win-command-prompt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/win-command-prompt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/python/test_firmware.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/python/test_firmware.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/python/test_firmware.py
-INPUT user-code/sw-env/sw-env-julia.tex
-INPUT user-code/sw-env/sw-env-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-download.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-download.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-download.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-windows-install.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-windows-install.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-windows-install.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/windows-cmd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/windows-cmd.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/win-command-prompt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/win-command-prompt.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-repl-windows.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-repl-windows.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-repl-windows.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-pkg-windows.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-pkg-windows.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-pkg-windows.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-terminal-repl.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-terminal-repl.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-terminal-repl.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-pkg.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-pkg.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/julia-pkg.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/julia/test_firmware.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/julia/test_firmware.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/julia/test_firmware.jl
-INPUT user-code/sw-env/sw-env-OM.tex
-INPUT user-code/sw-env/sw-env-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/openmodelica-run-anyway.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/openmodelica-run-anyway.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/openmodelica-run-anyway.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/OMEdit-libraries.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/OMEdit-libraries.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/OMEdit-libraries.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/OMEdit-UI.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/OMEdit-UI.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/OMEdit-UI.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-open-model.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-open-model.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-open-model.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-Modeling.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-Modeling.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-Modeling.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-modeling-views.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-modeling-views.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-modeling-views.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-text-view.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-text-view.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-text-view.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-simulate.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-simulate.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-simulate.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-sim-success.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-sim-success.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-sim-success.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-toolbox-loaded.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-toolbox-loaded.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-toolbox-loaded.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/openmodelica/windows//test_firmware.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/openmodelica/windows//test_firmware.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/openmodelica/windows//test_firmware.mo
-INPUT user-code/led/led-base.tex
-INPUT user-code/led/led-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/arduino-new-shield.jpeg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/arduino-new-shield.jpeg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/arduino-new-shield.jpeg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/rgb-led-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/rgb-led-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/rgb-led-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led_output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led_output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led_output.png
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/t1cmss.fd
-INPUT /usr/local/texlive/2017/texmf-dist/tex/latex/base/t1cmss.fd
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecss1095.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue/led-blue.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-red/led-blue-red.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-red/led-blue-red.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-blue-red/led-blue-red.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-green-blink/led-green-blink.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-green-blink/led-green-blink.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/led-green-blink/led-green-blink.ino
-INPUT user-code/led/led-scilab.tex
-INPUT user-code/led/led-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-delay.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-red.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-red.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-blue-red.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-green-blink.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-green-blink.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led-green-blink.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-com-2.png
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecrm1000.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-delay-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-delay-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-delay-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-red-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-red-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-blue-red-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-green-blink-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-green-blink-com-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-green-blink-com-2.png
-INPUT user-code/led/led-python.tex
-INPUT user-code/led/led-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-delay.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-red.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-red.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-blue-red.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-green-blink.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-green-blink.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led-green-blink.py
-INPUT user-code/led/led-julia.tex
-INPUT user-code/led/led-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-delay.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-red.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-red.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-blue-red.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-green-blink.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-green-blink.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-green-blink.jl
-INPUT user-code/led/led-OM.tex
-INPUT user-code/led/led-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-delay.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-red.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-red.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-blue-red.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-green-blink.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-green-blink.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModelica/led-green-blink.mo
-INPUT user-code/push/push-base.tex
-INPUT user-code/push/push-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/pushbutton-conn.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/pushbutton-conn.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/pushbutton-conn.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/switch.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/switch.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/switch.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/switch-led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/switch-led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/switch-led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led-push-button/led-push-button.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led-push-button/led-push-button.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led-push-button/led-push-button.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/push-button-status/push-button-status.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led-push-button/led-push-button.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led-push-button/led-push-button.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/led-push-button/led-push-button.ino
-INPUT user-code/push/push-scilab.tex
-INPUT user-code/push/push-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/sci-ard-meter.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/sci-ard-meter.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/sci-ard-meter.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led-push-button.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led-push-button.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led-push-button.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/push-button-status.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led-push-button.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led-push-button.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/led-push-button.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/push-button-status.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/push-button-status.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/push-button-status.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/led-push-button.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/led-push-button.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/led-push-button.PNG
-INPUT user-code/push/push-python.tex
-INPUT user-code/push/push-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led-push-button.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led-push-button.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led-push-button.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/push-button-status.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led-push-button.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led-push-button.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/led-push-button.py
-INPUT user-code/push/push-julia.tex
-INPUT user-code/push/push-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led-push-button.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led-push-button.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led-push-button.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/push-button-status.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led-push-button.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led-push-button.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led-push-button.jl
-INPUT user-code/push/push-OM.tex
-INPUT user-code/push/push-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led-push-button.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led-push-button.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led-push-button.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/push-button-status.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led-push-button.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led-push-button.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModelica/led-push-button.mo
-INPUT user-code/ldr/ldr-base.tex
-INPUT user-code/ldr/ldr-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr_sym.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr_sym.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr_sym.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-conn.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-conn.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-conn.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LDR.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LDR.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LDR.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LDR-led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LDR-led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LDR-led.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-read/ldr-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-led/ldr-led.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-led/ldr-led.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ldr-led/ldr-led.ino
-INPUT user-code/ldr/ldr-scilab.tex
-INPUT user-code/ldr/ldr-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-led.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-led.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr-led.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-read-xcos.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-read-xcos.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-read-xcos.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-read-plot.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-read-plot.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-read-plot.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-led-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-led-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-led-2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-led-read-plot.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-led-read-plot.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ldr-led-read-plot.PNG
-INPUT user-code/ldr/ldr-python.tex
-INPUT user-code/ldr/ldr-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-led.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-led.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr-led.py
-INPUT user-code/ldr/ldr-julia.tex
-INPUT user-code/ldr/ldr-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-led.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-led.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-led.jl
-INPUT user-code/ldr/ldr-OM.tex
-INPUT user-code/ldr/ldr-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-led.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-led.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModelica/ldr-led.mo
-INPUT user-code/pot/pot-base.tex
-INPUT user-code/pot/pot-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/potmeter.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/potmeter.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/potmeter.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/POT-led-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/POT-led-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/POT-led-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/pot-threshold/pot-threshold.ino
-INPUT user-code/pot/pot-scilab.tex
-INPUT user-code/pot/pot-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot-threshold.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/pot-threshold-1.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/pot-threshold-1.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/pot-threshold-1.PNG
-INPUT user-code/pot/pot-python.tex
-INPUT user-code/pot/pot-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot-threshold.py
-INPUT user-code/pot/pot-julia.tex
-INPUT user-code/pot/pot-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-threshold.jl
-INPUT user-code/pot/pot-OM.tex
-INPUT user-code/pot/pot-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModelica/pot-threshold.mo
-INPUT user-code/thermistor/thermistor-base.tex
-INPUT user-code/thermistor/thermistor-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/NTC-bead.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/NTC-bead.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/NTC-bead.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-sym.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-sym.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-sym.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/thermistor.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/thermistor.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/thermistor.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/thermistor-buzzer.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/thermistor-buzzer.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/thermistor-buzzer.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-read/therm-read.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
-INPUT user-code/thermistor/thermistor-scilab.tex
-INPUT user-code/thermistor/thermistor-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-buzzer.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-buzzer.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-buzzer.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-read.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-buzzer.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-buzzer.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/scilab/therm-buzzer.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-read-xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-read-xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-read-xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-read.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-read.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-read.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-buzzer-xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-buzzer-xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-buzzer-xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-buzzer.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-buzzer.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/figures/therm-buzzer.png
-INPUT user-code/thermistor/thermistor-python.tex
-INPUT user-code/thermistor/thermistor-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-buzzer.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-buzzer.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-buzzer.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-read.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-buzzer.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-buzzer.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/python/therm-buzzer.py
-INPUT user-code/thermistor/thermistor-julia.tex
-INPUT user-code/thermistor/thermistor-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-buzzer.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-buzzer.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-buzzer.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-read.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-buzzer.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-buzzer.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/julia/therm-buzzer.jl
-INPUT user-code/thermistor/thermistor-OM.tex
-INPUT user-code/thermistor/thermistor-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-buzzer.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-buzzer.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-buzzer.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-read.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-buzzer.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-buzzer.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/OpenModelica/therm-buzzer.mo
-INPUT user-code/servo/servo-base.tex
-INPUT user-code/servo/servo-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-uno-shield.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-uno-shield.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-uno-shield.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-pot-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-pot-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-pot-bb.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-reverse/servo-reverse.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-reverse/servo-reverse.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-reverse/servo-reverse.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-pot/servo-pot.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-pot/servo-pot.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-pot/servo-pot.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-init/servo-init.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-reverse/servo-reverse.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-reverse/servo-reverse.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-reverse/servo-reverse.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-loop/servo-loop.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-loop/servo-loop.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-loop/servo-loop.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-pot/servo-pot.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-pot/servo-pot.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/servo-pot/servo-pot.ino
-INPUT user-code/servo/servo-scilab.tex
-INPUT user-code/servo/servo-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-reverse.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-reverse.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-reverse.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-pot.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-pot.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-pot.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-init.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-reverse.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-reverse.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-reverse.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-loop.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-loop.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-loop.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-pot.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-pot.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/servo-pot.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-init.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-init.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-init.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-reverse.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-reverse.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-reverse.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-loop.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-loop.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-loop.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-pot.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-pot.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/servo-pot.png
-INPUT user-code/servo/servo-python.tex
-INPUT user-code/servo/servo-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-reverse.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-reverse.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-reverse.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-pot.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-pot.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-pot.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-init.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-reverse.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-reverse.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-reverse.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-loop.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-loop.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-loop.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-pot.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-pot.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/servo-pot.py
-INPUT user-code/servo/servo-julia.tex
-INPUT user-code/servo/servo-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-reverse.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-reverse.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-reverse.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-pot.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-pot.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-pot.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-init.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-reverse.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-reverse.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-reverse.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-loop.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-loop.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-loop.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-pot.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-pot.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/servo-pot.jl
-INPUT user-code/servo/servo-OM.tex
-INPUT user-code/servo/servo-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-reverse.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-reverse.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-reverse.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-pot.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-pot.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-pot.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-init.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-reverse.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-reverse.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-reverse.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-loop.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-loop.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-loop.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-pot.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-pot.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenModelica/servo-pot.mo
-INPUT user-code/dcmotor/dcmotor-base.tex
-INPUT user-code/dcmotor/dcmotor-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor_board.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor_board.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor_board.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/uno-pwm.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/uno-pwm.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/uno-pwm.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/schematic.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dc_motor_description.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dc_motor_description.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dc_motor_description.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/tfm/jknappen/ec/ecsi1095.tfm
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino
-INPUT user-code/dcmotor/dcmotor-scilab.tex
-INPUT user-code/dcmotor/dcmotor-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-clock.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-both.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-loop.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-loop.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab/dcmotor-loop.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-clock.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-clock.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-clock.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-both.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-both.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-both.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-loop.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-loop.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-loop.png
-INPUT user-code/dcmotor/dcmotor-python.tex
-INPUT user-code/dcmotor/dcmotor-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-clock.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-both.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-loop.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-loop.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python/dcmotor-loop.py
-INPUT user-code/dcmotor/dcmotor-julia.tex
-INPUT user-code/dcmotor/dcmotor-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-clock.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-both.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-loop.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-loop.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/dcmotor-loop.jl
-INPUT user-code/dcmotor/dcmotor-OM.tex
-INPUT user-code/dcmotor/dcmotor-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-both.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-loop.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-loop.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenModelica/dcmotor-loop.mo
-INPUT user-code/modbus/modbus-base.tex
-INPUT user-code/modbus/modbus-base.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig1.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig1.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig1.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig2.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig3.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig3.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/fig3.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/block-diagram.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/block-diagram.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/block-diagram.PNG
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/Full-Set-Up.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/Full-Set-Up.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/Full-Set-Up.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/arduino_code_flowchart.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/arduino_code_flowchart.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/arduino_code_flowchart.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/flowchart.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/flowchart.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/flowchart.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/arduino/send_packet.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/arduino/send_packet.ino
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/arduino/send_packet.ino
-INPUT user-code/modbus/modbus-scilab.tex
-INPUT user-code/modbus/modbus-scilab.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_val.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_val.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_val.sce
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_current.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_current.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_current.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_voltage.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_voltage.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_voltage.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_active_power.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_active_power.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/read_active_power.sci
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/current-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/current-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/current-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/current-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/current-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/current-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/voltage-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/voltage-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/voltage-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/voltage-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/voltage-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/voltage-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/active-power-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/active-power-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/active-power-output.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/active-power-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/active-power-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/active-power-output-setup.jpg
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/read_value_xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/read_value_xcos.png
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures/read_value_xcos.png
-INPUT user-code/modbus/modbus-python.tex
-INPUT user-code/modbus/modbus-python.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_current.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_current.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_current.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_voltage.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_voltage.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_voltage.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_active_power.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_active_power.py
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/read_active_power.py
-INPUT user-code/modbus/modbus-julia.tex
-INPUT user-code/modbus/modbus-julia.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readCurrent.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readCurrent.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readCurrent.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readVoltage.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readVoltage.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readVoltage.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readPower.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readPower.jl
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/readPower.jl
-INPUT user-code/modbus/modbus-OM.tex
-INPUT user-code/modbus/modbus-OM.tex
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readCurrent.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readCurrent.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readCurrent.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readVoltage.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readVoltage.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readVoltage.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readPower.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readPower.mo
-INPUT /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenModelica/readPower.mo
-INPUT floss-arduino.bbl
-INPUT floss-arduino.bbl
-OUTPUT floss-arduino.thm
-INPUT floss-arduino.aux
-INPUT ./floss-arduino.out
-INPUT ./floss-arduino.out
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/enc/dvips/cm-super/cm-super-t1.enc
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/enc/dvips/base/8r.enc
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy9.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/bera/fvmr8a.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx0900.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx1095.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx1200.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx1440.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx2074.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfbx2488.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0500.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0600.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0800.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm0900.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm1000.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfrm1095.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfsi1095.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfss1095.pfb
-INPUT /usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfti1095.pfb
+PWD /home/fossee/Desktop/floss-scilab-arduino
+INPUT /etc/texmf/web2c/texmf.cnf
+INPUT /usr/share/texmf/web2c/texmf.cnf
+INPUT /usr/share/texlive/texmf-dist/web2c/texmf.cnf
+INPUT /var/lib/texmf/web2c/pdftex/pdflatex.fmt
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.log
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/book.cls
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/book.cls
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/bk11.clo
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/bk11.clo
+INPUT /usr/share/texlive/texmf-dist/fonts/map/fontname/texfonts.map
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr10.tfm
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
+INPUT /usr/share/texlive/texmf-dist/tex/latex/layouts/layouts.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/layouts/layouts.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/cclicenses/cclicenses.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/cclicenses/cclicenses.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/rotating.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/rotating.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/morefloats/morefloats.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/morefloats/morefloats.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/kvoptions/kvoptions.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/kvoptions/kvoptions.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/ltxcmds/ltxcmds.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/ltxcmds/ltxcmds.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/kvsetkeys/kvsetkeys.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/kvsetkeys/kvsetkeys.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/paralist/paralist.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/paralist/paralist.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/chngcntr/chngcntr.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/chngcntr/chngcntr.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/cite/cite.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/cite/cite.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/iftex/iftex.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/iftex/iftex.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/pdftexcmds/pdftexcmds.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/pdftexcmds/pdftexcmds.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/infwarerr/infwarerr.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/infwarerr/infwarerr.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/kvdefinekeys/kvdefinekeys.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/kvdefinekeys/kvdefinekeys.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/pdfescape/pdfescape.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/pdfescape/pdfescape.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hycolor/hycolor.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hycolor/hycolor.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/letltxmacro/letltxmacro.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/letltxmacro/letltxmacro.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/auxhook/auxhook.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/auxhook/auxhook.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def
+INPUT /usr/share/texlive/texmf-dist/tex/generic/intcalc/intcalc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/intcalc/intcalc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/etexcmds/etexcmds.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/etexcmds/etexcmds.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/url/url.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/url/url.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/bitset/bitset.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/bitset/bitset.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/bigintcalc/bigintcalc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/bigintcalc/bigintcalc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/atbegshi/atbegshi.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/atbegshi/atbegshi.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def
+INPUT /usr/share/texlive/texmf-dist/tex/latex/atveryend/atveryend.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/atveryend/atveryend.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/rerunfilecheck/rerunfilecheck.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/rerunfilecheck/rerunfilecheck.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/uniquecounter/uniquecounter.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/uniquecounter/uniquecounter.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/subfig/subfig.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/subfig/subfig.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/caption/caption.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/caption/caption.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/caption/caption3.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/caption/caption3.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/tools/varioref.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/tools/varioref.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1095.tfm
+INPUT /usr/share/texlive/texmf-dist/tex/latex/bera/beramono.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/bera/beramono.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/seqsplit/seqsplit.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/seqsplit/seqsplit.sty
+INPUT /home/fossee/Desktop/floss-scilab-arduino/suppl/styles.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/suppl/styles.tex
+INPUT /usr/share/texlive/texmf-dist/tex/latex/ntheorem/ntheorem.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/ntheorem/ntheorem.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/tools/theorem.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/tools/theorem.sty
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.idx
+INPUT /usr/share/texlive/texmf-dist/tex/latex/l3backend/l3backend-pdfmode.def
+INPUT /usr/share/texlive/texmf-dist/tex/latex/l3backend/l3backend-pdfmode.def
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux
+INPUT /usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
+INPUT /usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
+INPUT /usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/refcount/refcount.sty
+INPUT /usr/share/texlive/texmf-dist/tex/latex/refcount/refcount.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/gettitlestring/gettitlestring.sty
+INPUT /usr/share/texlive/texmf-dist/tex/generic/gettitlestring/gettitlestring.sty
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm2488.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx2488.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.toc
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.toc
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx1095.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr8.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr6.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi10.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi8.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi6.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy10.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy8.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy6.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmex10.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex8.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex7.tfm
+INPUT /var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecsl1095.tfm
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.toc
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lof
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lof
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lof
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lot
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lot
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lot
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.ard
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.ard
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.ard
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.cod
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.cod
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.cod
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pyd
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pyd
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pyd
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.juliad
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.juliad
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.juliad
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.OpenModelicad
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.OpenModelicad
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.OpenModelicad
+INPUT /home/fossee/Desktop/floss-scilab-arduino/suppl/acr.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/suppl/acr.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/suppl/intro.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/suppl/intro.tex
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm2074.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx2074.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm1095.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0800.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0800.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0600.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0600.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0900.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmr9.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmmi9.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/cm/cmsy9.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex9.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/amsfonts/cmextra/cmex7.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0900.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm0500.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/tcrm0500.tfm
+INPUT /usr/share/texlive/texmf-dist/tex/latex/bera/t1fvm.fd
+INPUT /usr/share/texlive/texmf-dist/tex/latex/bera/t1fvm.fd
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/hw-env.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/hw-env.tex
+INPUT /usr/share/texlive/texmf-dist/fonts/vf/public/bera/fvmr8t.vf
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1440.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx1440.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1200.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx1200.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecti1095.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager-com.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager-com.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager-com.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm
+INPUT /usr/share/texlive/texmf-dist/fonts/vf/public/bera/fvmr8t.vf
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/floss-firmware/floss-firmware.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/floss-firmware/floss-firmware.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/floss-firmware/floss-firmware.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8t.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png
+INPUT /usr/share/texlive/texmf-dist/fonts/vf/public/bera/fvmr8t.vf
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/public/bera/fvmr8r.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecbx0900.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python-windows-install.JPG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python-windows-install.JPG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python-windows-install.JPG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows-cmd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows-cmd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows-cmd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-command-prompt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-command-prompt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-command-prompt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/python/test_firmware.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/python/test_firmware.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/python/test_firmware.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-download.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-download.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-download.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-windows-install.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-windows-install.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-windows-install.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows-cmd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows-cmd.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-command-prompt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-command-prompt.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-repl-windows.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-repl-windows.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-repl-windows.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg-windows.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg-windows.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg-windows.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal-repl.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal-repl.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal-repl.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/julia/test_firmware.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/julia/test_firmware.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/julia/test_firmware.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmodelica-run-anyway.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmodelica-run-anyway.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmodelica-run-anyway.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-simulate.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-simulate.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-simulate.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-toolbox-loaded.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-toolbox-loaded.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-toolbox-loaded.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/openmodelica/windows//test_firmware.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/openmodelica/windows//test_firmware.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/tools/openmodelica/windows//test_firmware.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-new-shield.jpeg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-new-shield.jpeg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-new-shield.jpeg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/t1cmss.fd
+INPUT /usr/share/texlive/texmf-dist/tex/latex/base/t1cmss.fd
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecss1095.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-red/led-blue-red.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-red/led-blue-red.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-red/led-blue-red.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-green-blink/led-green-blink.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-green-blink/led-green-blink.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-green-blink/led-green-blink.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-red.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-red.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-red.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-green-blink.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-green-blink.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-green-blink.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-com-2.png
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecrm1000.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink-com-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-red.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-red.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-red.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-green-blink.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-green-blink.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-green-blink.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-red.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-red.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-red.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-green-blink.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-green-blink.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-green-blink.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/led-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-red.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-red.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-red.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-green-blink.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-green-blink.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-green-blink.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/sci-ard-meter.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/sci-ard-meter.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/sci-ard-meter.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/push-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR-led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR-led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR-led.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-led/ldr-led.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-led/ldr-led.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-led/ldr-led.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-led.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-led.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-led.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-plot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-plot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-plot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-read-plot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-read-plot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-read-plot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-led.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-led.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-led.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-led.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-led.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-led.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-led.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-led.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-led.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold-1.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold-1.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold-1.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermistor.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermistor.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermistor.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermistor-buzzer.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermistor-buzzer.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermistor-buzzer.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-uno-shield.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-uno-shield.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-uno-shield.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-loop/servo-loop.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-loop/servo-loop.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-loop/servo-loop.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-loop.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-loop.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-loop.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-loop.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-loop.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-loop.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-loop.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-loop.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-loop.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-pot.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-pot.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-pot.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-loop.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-loop.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-loop.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-pot.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-pot.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-pot.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-pwm.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-pwm.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-pwm.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /usr/share/texlive/texmf-dist/fonts/tfm/jknappen/ec/ecsi1095.tfm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-loop.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-loop.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-loop.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-loop.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-loop.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-loop.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-loop.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-loop.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-loop.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-loop.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-loop.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-loop.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-base.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send_packet.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send_packet.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send_packet.ino
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-scilab.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_val.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_val.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_val.sce
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_current.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_current.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_current.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_voltage.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_voltage.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_voltage.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_active_power.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_active_power.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_active_power.sci
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-python.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_current.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_current.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_current.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_voltage.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_voltage.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_voltage.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_active_power.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_active_power.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_active_power.py
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-julia.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus-OM.tex
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCurrent.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCurrent.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCurrent.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVoltage.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVoltage.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVoltage.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPower.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPower.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPower.mo
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.bbl
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.bbl
+OUTPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.thm
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.out
+INPUT /usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-t1.enc
+INPUT /usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-ts1.enc
+INPUT /usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy9.pfb
+INPUT /usr/share/texlive/texmf-dist/fonts/type1/public/bera/fvmr8a.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfbx0900.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfbx1095.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfbx1200.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfbx1440.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfbx2074.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfbx2488.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfrm0600.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfrm0800.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfrm0900.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfrm1000.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfrm1095.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfsi1095.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfss1095.pfb
+INPUT /usr/share/texmf/fonts/type1/public/cm-super/sfti1095.pfb
diff --git a/floss-arduino.ilg b/floss-arduino.ilg
index ace6d50..0083481 100644
--- a/floss-arduino.ilg
+++ b/floss-arduino.ilg
@@ -1,4 +1,4 @@
-This is makeindex, version 2.15 [TeX Live 2017] (kpathsea + Thai support).
+This is makeindex, version 2.15 [TeX Live 2019] (kpathsea + Thai support).
 Scanning input file floss-arduino.idx....done (5 entries accepted, 0 rejected).
 Sorting entries....done (11 comparisons).
 Generating output file floss-arduino.ind....done (15 lines written, 0 warnings).
diff --git a/floss-arduino.juliad b/floss-arduino.juliad
index 873676c..f12cd71 100644
--- a/floss-arduino.juliad
+++ b/floss-arduino.juliad
@@ -1,30 +1,30 @@
-\contentsline {section}{\numberline {3.{1}}A Julia source file to check whether the firmware is properly installed or not}{55}{juliamass.3.1}
+\contentsline {section}{\numberline {3.{1}}A Julia source file to check whether the firmware is properly installed or not}{55}{juliamass.3.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{87}{juliamass.4.1}
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{88}{juliamass.4.2}
-\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{88}{juliamass.4.3}
-\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{88}{juliamass.4.4}
+\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{87}{juliamass.4.1}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{88}{juliamass.4.2}%
+\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{88}{juliamass.4.3}%
+\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{88}{juliamass.4.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on Command Prompt or the Terminal.}{109}{juliamass.5.1}
-\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{109}{juliamass.5.2}
+\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on Command Prompt or the Terminal.}{109}{juliamass.5.1}%
+\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{109}{juliamass.5.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{130}{juliamass.6.1}
-\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{131}{juliamass.6.2}
+\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{130}{juliamass.6.1}%
+\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{131}{juliamass.6.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{145}{juliamass.7.1}
+\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{145}{juliamass.7.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{168}{juliamass.8.1}
-\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{169}{juliamass.8.2}
+\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{168}{juliamass.8.1}%
+\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{169}{juliamass.8.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{195}{juliamass.9.1}
-\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{195}{juliamass.9.2}
-\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{195}{juliamass.9.3}
-\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{196}{juliamass.9.4}
+\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{195}{juliamass.9.1}%
+\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{195}{juliamass.9.2}%
+\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{195}{juliamass.9.3}%
+\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{196}{juliamass.9.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{225}{juliamass.10.1}
-\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{225}{juliamass.10.2}
-\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{225}{juliamass.10.3}
+\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{225}{juliamass.10.1}%
+\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{225}{juliamass.10.2}%
+\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{225}{juliamass.10.3}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{251}{juliamass.11.1}
-\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{252}{juliamass.11.2}
-\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Active Power Output}{252}{juliamass.11.3}
+\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{251}{juliamass.11.1}%
+\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{252}{juliamass.11.2}%
+\contentsline {section}{\numberline {11.{3}}First 10 lines of the code for Single Phase Active Power Output}{252}{juliamass.11.3}%
diff --git a/floss-arduino.lof b/floss-arduino.lof
index c0b7e1f..8dc89c8 100644
--- a/floss-arduino.lof
+++ b/floss-arduino.lof
@@ -1,137 +1,137 @@
 \addvspace {10\p@ }
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {2.1}{\ignorespaces Functional block diagram of a microcontroller\relax }}{4}{figure.caption.10}
-\contentsline {figure}{\numberline {2.2}{\ignorespaces ADC resolution\relax }}{6}{figure.caption.11}
-\contentsline {figure}{\numberline {2.3}{\ignorespaces The logo of Open Source Hardware\relax }}{7}{figure.caption.12}
-\contentsline {figure}{\numberline {2.4}{\ignorespaces Arduino Uno Board\relax }}{9}{figure.caption.13}
-\contentsline {figure}{\numberline {2.5}{\ignorespaces Arduino Mega Board\relax }}{10}{figure.caption.15}
-\contentsline {figure}{\numberline {2.6}{\ignorespaces LilyPad Arduino Board\relax }}{11}{figure.caption.16}
-\contentsline {figure}{\numberline {2.7}{\ignorespaces Arduino Phone\relax }}{11}{figure.caption.18}
-\contentsline {figure}{\numberline {2.8}{\ignorespaces 3D printer\relax }}{12}{figure.caption.21}
-\contentsline {figure}{\numberline {2.9}{\ignorespaces PCB image of the shield}}{13}{figure.caption.22}
-\contentsline {figure}{\numberline {2.10}{\ignorespaces Pictorial representation of the schematic of the shield\relax }}{14}{figure.caption.23}
-\contentsline {figure}{\numberline {2.11}{\ignorespaces PCB of the shield\relax }}{14}{figure.caption.24}
-\contentsline {figure}{\numberline {2.12}{\ignorespaces Picture of the shield with all components\relax }}{16}{figure.caption.27}
+\contentsline {figure}{\numberline {2.1}{\ignorespaces Functional block diagram of a microcontroller\relax }}{4}{figure.caption.10}%
+\contentsline {figure}{\numberline {2.2}{\ignorespaces ADC resolution\relax }}{6}{figure.caption.11}%
+\contentsline {figure}{\numberline {2.3}{\ignorespaces The logo of Open Source Hardware\relax }}{7}{figure.caption.12}%
+\contentsline {figure}{\numberline {2.4}{\ignorespaces Arduino Uno Board\relax }}{9}{figure.caption.13}%
+\contentsline {figure}{\numberline {2.5}{\ignorespaces Arduino Mega Board\relax }}{10}{figure.caption.15}%
+\contentsline {figure}{\numberline {2.6}{\ignorespaces LilyPad Arduino Board\relax }}{11}{figure.caption.16}%
+\contentsline {figure}{\numberline {2.7}{\ignorespaces Arduino Phone\relax }}{11}{figure.caption.18}%
+\contentsline {figure}{\numberline {2.8}{\ignorespaces 3D printer\relax }}{12}{figure.caption.21}%
+\contentsline {figure}{\numberline {2.9}{\ignorespaces PCB image of the shield}}{13}{figure.caption.22}%
+\contentsline {figure}{\numberline {2.10}{\ignorespaces Pictorial representation of the schematic of the shield\relax }}{14}{figure.caption.23}%
+\contentsline {figure}{\numberline {2.11}{\ignorespaces PCB of the shield\relax }}{14}{figure.caption.24}%
+\contentsline {figure}{\numberline {2.12}{\ignorespaces Picture of the shield with all components\relax }}{16}{figure.caption.27}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {3.1}{\ignorespaces Windows device manager\relax }}{19}{figure.caption.28}
-\contentsline {figure}{\numberline {3.2}{\ignorespaces Windows device manager\relax }}{20}{figure.caption.29}
-\contentsline {figure}{\numberline {3.3}{\ignorespaces Windows update driver option\relax }}{21}{figure.caption.30}
-\contentsline {figure}{\numberline {3.4}{\ignorespaces Linux terminal to launch Arduino IDE\relax }}{22}{figure.caption.31}
-\contentsline {figure}{\numberline {3.5}{\ignorespaces Arduino IDE\relax }}{22}{figure.caption.32}
-\contentsline {figure}{\numberline {3.6}{\ignorespaces Linux terminal to launch Scilab\relax }}{27}{figure.caption.33}
-\contentsline {figure}{\numberline {3.7}{\ignorespaces Browsing toolbox directory\relax }}{28}{figure.caption.34}
-\contentsline {figure}{\numberline {3.8}{\ignorespaces Output of builder.sce\relax }}{29}{figure.caption.35}
-\contentsline {figure}{\numberline {3.9}{\ignorespaces Output of loader.sce\relax }}{30}{figure.caption.36}
-\contentsline {figure}{\numberline {3.10}{\ignorespaces Device Manager in windows\relax }}{31}{figure.caption.37}
-\contentsline {figure}{\numberline {3.11}{\ignorespaces COM port properties window\relax }}{32}{figure.caption.38}
-\contentsline {figure}{\numberline {3.12}{\ignorespaces Port number on Linux terminal\relax }}{32}{figure.caption.39}
-\contentsline {figure}{\numberline {3.13}{\ignorespaces Scilab test code output\relax }}{34}{figure.caption.40}
-\contentsline {figure}{\numberline {3.14}{\ignorespaces Arduino toolbox functions used in this book\relax }}{34}{figure.caption.41}
-\contentsline {figure}{\numberline {3.15}{\ignorespaces Sine generator in palette browser\relax }}{36}{figure.caption.42}
-\contentsline {figure}{\numberline {3.16}{\ignorespaces CSCOPE block in xcos\relax }}{37}{figure.caption.43}
-\contentsline {figure}{\numberline {3.17}{\ignorespaces CLOCK\_c block in xcos\relax }}{37}{figure.caption.44}
-\contentsline {figure}{\numberline {3.18}{\ignorespaces Sine generator in Xcos\relax }}{38}{figure.caption.45}
-\contentsline {figure}{\numberline {3.19}{\ignorespaces Sine generator Xcos output\relax }}{38}{figure.caption.46}
-\contentsline {figure}{\numberline {3.20}{\ignorespaces CSCOPE configuration window\relax }}{39}{figure.caption.47}
-\contentsline {figure}{\numberline {3.21}{\ignorespaces Simulation setup window\relax }}{40}{figure.caption.48}
-\contentsline {figure}{\numberline {3.22}{\ignorespaces Palette browser showing Arduino blocks\relax }}{40}{figure.caption.49}
-\contentsline {figure}{\numberline {3.23}{\ignorespaces Xcos block help\relax }}{41}{figure.caption.50}
-\contentsline {figure}{\numberline {3.24}{\ignorespaces Installing Python 3 on Windows\relax }}{42}{figure.caption.51}
-\contentsline {figure}{\numberline {3.25}{\ignorespaces Launching the Command Prompt on Windows\relax }}{43}{figure.caption.52}
-\contentsline {figure}{\numberline {3.26}{\ignorespaces Command Prompt on Windows\relax }}{43}{figure.caption.53}
-\contentsline {figure}{\numberline {3.27}{\ignorespaces Julia's website to download 64-bit Windows/Linux binaries\relax }}{48}{figure.caption.54}
-\contentsline {figure}{\numberline {3.28}{\ignorespaces Installing Julia 1.6.0 on Windows\relax }}{48}{figure.caption.55}
-\contentsline {figure}{\numberline {3.29}{\ignorespaces Launching the Command Prompt on Windows\relax }}{49}{figure.caption.56}
-\contentsline {figure}{\numberline {3.30}{\ignorespaces Command Prompt on Windows\relax }}{49}{figure.caption.57}
-\contentsline {figure}{\numberline {3.31}{\ignorespaces Windows command prompt to launch Julia REPL\relax }}{50}{figure.caption.58}
-\contentsline {figure}{\numberline {3.32}{\ignorespaces Windows command prompt to enter Pkg REPL in Julia\relax }}{51}{figure.caption.59}
-\contentsline {figure}{\numberline {3.33}{\ignorespaces Linux terminal to launch Julia REPL\relax }}{53}{figure.caption.60}
-\contentsline {figure}{\numberline {3.34}{\ignorespaces Linux terminal to enter Pkg REPL in Julia\relax }}{54}{figure.caption.61}
-\contentsline {figure}{\numberline {3.35}{\ignorespaces Allowing Microsoft Defender to run the executable file\relax }}{57}{figure.caption.62}
-\contentsline {figure}{\numberline {3.36}{\ignorespaces Setup of Modelica Standard Library version\relax }}{58}{figure.caption.63}
-\contentsline {figure}{\numberline {3.37}{\ignorespaces User Interface of OMEdit\relax }}{60}{figure.caption.64}
-\contentsline {figure}{\numberline {3.38}{\ignorespaces Opening a model in OMEdit\relax }}{61}{figure.caption.65}
-\contentsline {figure}{\numberline {3.39}{\ignorespaces Opening a model in diagram view in OMEdit\relax }}{62}{figure.caption.66}
-\contentsline {figure}{\numberline {3.40}{\ignorespaces Different views of a model in OMEdit\relax }}{62}{figure.caption.67}
-\contentsline {figure}{\numberline {3.41}{\ignorespaces Opening a model in text view in OMEdit\relax }}{63}{figure.caption.68}
-\contentsline {figure}{\numberline {3.42}{\ignorespaces Simulating a model in OMEdit\relax }}{63}{figure.caption.69}
-\contentsline {figure}{\numberline {3.43}{\ignorespaces Output window of OMEdit\relax }}{64}{figure.caption.70}
-\contentsline {figure}{\numberline {3.44}{\ignorespaces Examples provided in the OpenModelica-Arduino toolbox\relax }}{66}{figure.caption.71}
+\contentsline {figure}{\numberline {3.1}{\ignorespaces Windows device manager\relax }}{19}{figure.caption.28}%
+\contentsline {figure}{\numberline {3.2}{\ignorespaces Windows device manager\relax }}{20}{figure.caption.29}%
+\contentsline {figure}{\numberline {3.3}{\ignorespaces Windows update driver option\relax }}{21}{figure.caption.30}%
+\contentsline {figure}{\numberline {3.4}{\ignorespaces Linux terminal to launch Arduino IDE\relax }}{22}{figure.caption.31}%
+\contentsline {figure}{\numberline {3.5}{\ignorespaces Arduino IDE\relax }}{22}{figure.caption.32}%
+\contentsline {figure}{\numberline {3.6}{\ignorespaces Linux terminal to launch Scilab\relax }}{27}{figure.caption.33}%
+\contentsline {figure}{\numberline {3.7}{\ignorespaces Browsing toolbox directory\relax }}{28}{figure.caption.34}%
+\contentsline {figure}{\numberline {3.8}{\ignorespaces Output of builder.sce\relax }}{29}{figure.caption.35}%
+\contentsline {figure}{\numberline {3.9}{\ignorespaces Output of loader.sce\relax }}{30}{figure.caption.36}%
+\contentsline {figure}{\numberline {3.10}{\ignorespaces Device Manager in windows\relax }}{31}{figure.caption.37}%
+\contentsline {figure}{\numberline {3.11}{\ignorespaces COM port properties window\relax }}{32}{figure.caption.38}%
+\contentsline {figure}{\numberline {3.12}{\ignorespaces Port number on Linux terminal\relax }}{32}{figure.caption.39}%
+\contentsline {figure}{\numberline {3.13}{\ignorespaces Scilab test code output\relax }}{34}{figure.caption.40}%
+\contentsline {figure}{\numberline {3.14}{\ignorespaces Arduino toolbox functions used in this book\relax }}{34}{figure.caption.41}%
+\contentsline {figure}{\numberline {3.15}{\ignorespaces Sine generator in palette browser\relax }}{36}{figure.caption.42}%
+\contentsline {figure}{\numberline {3.16}{\ignorespaces CSCOPE block in xcos\relax }}{37}{figure.caption.43}%
+\contentsline {figure}{\numberline {3.17}{\ignorespaces CLOCK\_c block in xcos\relax }}{37}{figure.caption.44}%
+\contentsline {figure}{\numberline {3.18}{\ignorespaces Sine generator in Xcos\relax }}{38}{figure.caption.45}%
+\contentsline {figure}{\numberline {3.19}{\ignorespaces Sine generator Xcos output\relax }}{38}{figure.caption.46}%
+\contentsline {figure}{\numberline {3.20}{\ignorespaces CSCOPE configuration window\relax }}{39}{figure.caption.47}%
+\contentsline {figure}{\numberline {3.21}{\ignorespaces Simulation setup window\relax }}{40}{figure.caption.48}%
+\contentsline {figure}{\numberline {3.22}{\ignorespaces Palette browser showing Arduino blocks\relax }}{40}{figure.caption.49}%
+\contentsline {figure}{\numberline {3.23}{\ignorespaces Xcos block help\relax }}{41}{figure.caption.50}%
+\contentsline {figure}{\numberline {3.24}{\ignorespaces Installing Python 3 on Windows\relax }}{42}{figure.caption.51}%
+\contentsline {figure}{\numberline {3.25}{\ignorespaces Launching the Command Prompt on Windows\relax }}{43}{figure.caption.52}%
+\contentsline {figure}{\numberline {3.26}{\ignorespaces Command Prompt on Windows\relax }}{43}{figure.caption.53}%
+\contentsline {figure}{\numberline {3.27}{\ignorespaces Julia's website to download 64-bit Windows/Linux binaries\relax }}{48}{figure.caption.54}%
+\contentsline {figure}{\numberline {3.28}{\ignorespaces Installing Julia 1.6.0 on Windows\relax }}{48}{figure.caption.55}%
+\contentsline {figure}{\numberline {3.29}{\ignorespaces Launching the Command Prompt on Windows\relax }}{49}{figure.caption.56}%
+\contentsline {figure}{\numberline {3.30}{\ignorespaces Command Prompt on Windows\relax }}{49}{figure.caption.57}%
+\contentsline {figure}{\numberline {3.31}{\ignorespaces Windows command prompt to launch Julia REPL\relax }}{50}{figure.caption.58}%
+\contentsline {figure}{\numberline {3.32}{\ignorespaces Windows command prompt to enter Pkg REPL in Julia\relax }}{51}{figure.caption.59}%
+\contentsline {figure}{\numberline {3.33}{\ignorespaces Linux terminal to launch Julia REPL\relax }}{53}{figure.caption.60}%
+\contentsline {figure}{\numberline {3.34}{\ignorespaces Linux terminal to enter Pkg REPL in Julia\relax }}{54}{figure.caption.61}%
+\contentsline {figure}{\numberline {3.35}{\ignorespaces Allowing Microsoft Defender to run the executable file\relax }}{57}{figure.caption.62}%
+\contentsline {figure}{\numberline {3.36}{\ignorespaces Setup of Modelica Standard Library version\relax }}{58}{figure.caption.63}%
+\contentsline {figure}{\numberline {3.37}{\ignorespaces User Interface of OMEdit\relax }}{60}{figure.caption.64}%
+\contentsline {figure}{\numberline {3.38}{\ignorespaces Opening a model in OMEdit\relax }}{61}{figure.caption.65}%
+\contentsline {figure}{\numberline {3.39}{\ignorespaces Opening a model in diagram view in OMEdit\relax }}{62}{figure.caption.66}%
+\contentsline {figure}{\numberline {3.40}{\ignorespaces Different views of a model in OMEdit\relax }}{62}{figure.caption.67}%
+\contentsline {figure}{\numberline {3.41}{\ignorespaces Opening a model in text view in OMEdit\relax }}{63}{figure.caption.68}%
+\contentsline {figure}{\numberline {3.42}{\ignorespaces Simulating a model in OMEdit\relax }}{63}{figure.caption.69}%
+\contentsline {figure}{\numberline {3.43}{\ignorespaces Output window of OMEdit\relax }}{64}{figure.caption.70}%
+\contentsline {figure}{\numberline {3.44}{\ignorespaces Examples provided in the OpenModelica-Arduino toolbox\relax }}{66}{figure.caption.71}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {4.1}{\ignorespaces Light Emitting Diode\relax }}{67}{figure.caption.72}
-\contentsline {figure}{\numberline {4.2}{\ignorespaces Internal connection diagram for the RGB LED on the shield\relax }}{68}{figure.caption.73}
-\contentsline {figure}{\numberline {4.3}{\ignorespaces Connecting Arduino Uno\ and shield\relax }}{68}{figure.caption.74}
-\contentsline {figure}{\numberline {4.4}{\ignorespaces An RGB LED with Arduino Uno\ using a breadboard\relax }}{69}{figure.caption.75}
-\contentsline {figure}{\numberline {4.5}{\ignorespaces LED experiments directly on Arduino Uno\ board, without the shield\relax }}{72}{figure.caption.77}
-\contentsline {figure}{\numberline {4.6}{\ignorespaces Turning the blue LED on through Xcos}}{77}{figure.caption.79}
-\contentsline {figure}{\numberline {4.7}{\ignorespaces Turning the blue LED on through Xcos for two seconds}}{78}{figure.caption.81}
-\contentsline {figure}{\numberline {4.8}{\ignorespaces Turning the blue and red LEDs on through Xcos and turning them off one by one}}{79}{figure.caption.83}
-\contentsline {figure}{\numberline {4.9}{\ignorespaces Blinking the green LED every second through Xcos}}{80}{figure.caption.85}
+\contentsline {figure}{\numberline {4.1}{\ignorespaces Light Emitting Diode\relax }}{67}{figure.caption.72}%
+\contentsline {figure}{\numberline {4.2}{\ignorespaces Internal connection diagram for the RGB LED on the shield\relax }}{68}{figure.caption.73}%
+\contentsline {figure}{\numberline {4.3}{\ignorespaces Connecting Arduino Uno\ and shield\relax }}{68}{figure.caption.74}%
+\contentsline {figure}{\numberline {4.4}{\ignorespaces An RGB LED with Arduino Uno\ using a breadboard\relax }}{69}{figure.caption.75}%
+\contentsline {figure}{\numberline {4.5}{\ignorespaces LED experiments directly on Arduino Uno\ board, without the shield\relax }}{72}{figure.caption.77}%
+\contentsline {figure}{\numberline {4.6}{\ignorespaces Turning the blue LED on through Xcos}}{77}{figure.caption.79}%
+\contentsline {figure}{\numberline {4.7}{\ignorespaces Turning the blue LED on through Xcos for two seconds}}{78}{figure.caption.81}%
+\contentsline {figure}{\numberline {4.8}{\ignorespaces Turning the blue and red LEDs on through Xcos and turning them off one by one}}{79}{figure.caption.83}%
+\contentsline {figure}{\numberline {4.9}{\ignorespaces Blinking the green LED every second through Xcos}}{80}{figure.caption.85}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {5.1}{\ignorespaces Internal connection diagram for the pushbutton on the shield\relax }}{96}{figure.caption.87}
-\contentsline {figure}{\numberline {5.2}{\ignorespaces A pushbutton to read its status with Arduino Uno using a breadboard\relax }}{96}{figure.caption.88}
-\contentsline {figure}{\numberline {5.3}{\ignorespaces A pushbutton to control an LED with Arduino Uno using a breadboard\relax }}{97}{figure.caption.89}
-\contentsline {figure}{\numberline {5.4}{\ignorespaces GUI in Scilab to show the status of the pushbutton\relax }}{101}{figure.caption.90}
-\contentsline {figure}{\numberline {5.5}{\ignorespaces Printing the push button status on the display block}}{103}{figure.caption.91}
-\contentsline {figure}{\numberline {5.6}{\ignorespaces Turning the LED on or off, depending on the pushbutton}}{104}{figure.caption.93}
+\contentsline {figure}{\numberline {5.1}{\ignorespaces Internal connection diagram for the pushbutton on the shield\relax }}{96}{figure.caption.87}%
+\contentsline {figure}{\numberline {5.2}{\ignorespaces A pushbutton to read its status with Arduino Uno using a breadboard\relax }}{96}{figure.caption.88}%
+\contentsline {figure}{\numberline {5.3}{\ignorespaces A pushbutton to control an LED with Arduino Uno using a breadboard\relax }}{97}{figure.caption.89}%
+\contentsline {figure}{\numberline {5.4}{\ignorespaces GUI in Scilab to show the status of the pushbutton\relax }}{101}{figure.caption.90}%
+\contentsline {figure}{\numberline {5.5}{\ignorespaces Printing the push button status on the display block}}{103}{figure.caption.91}%
+\contentsline {figure}{\numberline {5.6}{\ignorespaces Turning the LED on or off, depending on the pushbutton}}{104}{figure.caption.93}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {6.1}{\ignorespaces Light Dependent Resistor\relax }}{116}{figure.caption.95}
-\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Pictorial representation of an LDR}}}{116}{subfigure.1.1}
-\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Symbolic representation of an LDR}}}{116}{subfigure.1.2}
-\contentsline {figure}{\numberline {6.2}{\ignorespaces Internal connection diagram for the LDR on the shield\relax }}{116}{figure.caption.96}
-\contentsline {figure}{\numberline {6.3}{\ignorespaces An LDR to read its values with Arduino Uno\ using a breadboard\relax }}{117}{figure.caption.97}
-\contentsline {figure}{\numberline {6.4}{\ignorespaces An LDR to control an LED with Arduino Uno using a breadboard\relax }}{118}{figure.caption.98}
-\contentsline {figure}{\numberline {6.5}{\ignorespaces Xcos diagram to read LDR values}}{123}{figure.caption.99}
-\contentsline {figure}{\numberline {6.6}{\ignorespaces Plot window in Xcos to read LDR values\relax }}{123}{figure.caption.100}
-\contentsline {figure}{\numberline {6.7}{\ignorespaces Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}}{125}{figure.caption.102}
-\contentsline {figure}{\numberline {6.8}{\ignorespaces Plot window in Xcos to read LDR values and the state of LED\relax }}{125}{figure.caption.103}
+\contentsline {figure}{\numberline {6.1}{\ignorespaces Light Dependent Resistor\relax }}{116}{figure.caption.95}%
+\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Pictorial representation of an LDR}}}{116}{subfigure.1.1}%
+\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Symbolic representation of an LDR}}}{116}{subfigure.1.2}%
+\contentsline {figure}{\numberline {6.2}{\ignorespaces Internal connection diagram for the LDR on the shield\relax }}{116}{figure.caption.96}%
+\contentsline {figure}{\numberline {6.3}{\ignorespaces An LDR to read its values with Arduino Uno\ using a breadboard\relax }}{117}{figure.caption.97}%
+\contentsline {figure}{\numberline {6.4}{\ignorespaces An LDR to control an LED with Arduino Uno using a breadboard\relax }}{118}{figure.caption.98}%
+\contentsline {figure}{\numberline {6.5}{\ignorespaces Xcos diagram to read LDR values}}{123}{figure.caption.99}%
+\contentsline {figure}{\numberline {6.6}{\ignorespaces Plot window in Xcos to read LDR values\relax }}{123}{figure.caption.100}%
+\contentsline {figure}{\numberline {6.7}{\ignorespaces Xcos diagram to read the value of the LDR, which is used to turn the blue LED on or off}}{125}{figure.caption.102}%
+\contentsline {figure}{\numberline {6.8}{\ignorespaces Plot window in Xcos to read LDR values and the state of LED\relax }}{125}{figure.caption.103}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {7.1}{\ignorespaces Potentiometer's schematic on the shield\relax }}{136}{figure.caption.105}
-\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Pictorial representation of a potentiometer}}}{136}{subfigure.1.1}
-\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Internal connection diagram for the potentiometer on the shield}}}{136}{subfigure.1.2}
-\contentsline {figure}{\numberline {7.2}{\ignorespaces A potentiometer to control an LED with Arduino Uno using a breadboard\relax }}{137}{figure.caption.106}
-\contentsline {figure}{\numberline {7.3}{\ignorespaces Turning LEDs on through Xcos depending on the potentiometer threshold}}{141}{figure.caption.107}
+\contentsline {figure}{\numberline {7.1}{\ignorespaces Potentiometer's schematic on the shield\relax }}{136}{figure.caption.105}%
+\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Pictorial representation of a potentiometer}}}{136}{subfigure.1.1}%
+\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Internal connection diagram for the potentiometer on the shield}}}{136}{subfigure.1.2}%
+\contentsline {figure}{\numberline {7.2}{\ignorespaces A potentiometer to control an LED with Arduino Uno using a breadboard\relax }}{137}{figure.caption.106}%
+\contentsline {figure}{\numberline {7.3}{\ignorespaces Turning LEDs on through Xcos depending on the potentiometer threshold}}{141}{figure.caption.107}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {8.1}{\ignorespaces Pictorial and symbolic representation of a thermistor\relax }}{150}{figure.caption.109}
-\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Pictorial representation of a thermistor\cite {therm-wiki}}}}{150}{subfigure.1.1}
-\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Symbolic representation of a thermistor}}}{150}{subfigure.1.2}
-\contentsline {figure}{\numberline {8.2}{\ignorespaces Internal connection diagrams for thermistor and buzzer on the shield\relax }}{150}{figure.caption.110}
-\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Thermistor connection diagram}}}{150}{subfigure.2.1}
-\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Buzzer connection diagram}}}{150}{subfigure.2.2}
-\contentsline {figure}{\numberline {8.3}{\ignorespaces A thermistor to read its values with Arduino Uno using a breadboard\relax }}{151}{figure.caption.111}
-\contentsline {figure}{\numberline {8.4}{\ignorespaces A thermistor to control a buzzer with Arduino Uno using a breadboard\relax }}{152}{figure.caption.112}
-\contentsline {figure}{\numberline {8.5}{\ignorespaces Xcos diagram to read thermistor values}}{160}{figure.caption.115}
-\contentsline {figure}{\numberline {8.6}{\ignorespaces Plot window in Xcos to read thermistor values\relax }}{161}{figure.caption.117}
-\contentsline {figure}{\numberline {8.7}{\ignorespaces Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}}{161}{figure.caption.118}
-\contentsline {figure}{\numberline {8.8}{\ignorespaces Plot window in Xcos to read thermistor values and the state of LED\relax }}{163}{figure.caption.120}
+\contentsline {figure}{\numberline {8.1}{\ignorespaces Pictorial and symbolic representation of a thermistor\relax }}{150}{figure.caption.109}%
+\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Pictorial representation of a thermistor\cite {therm-wiki}}}}{150}{subfigure.1.1}%
+\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Symbolic representation of a thermistor}}}{150}{subfigure.1.2}%
+\contentsline {figure}{\numberline {8.2}{\ignorespaces Internal connection diagrams for thermistor and buzzer on the shield\relax }}{150}{figure.caption.110}%
+\contentsline {subfigure}{\numberline {(a)}{\ignorespaces {Thermistor connection diagram}}}{150}{subfigure.2.1}%
+\contentsline {subfigure}{\numberline {(b)}{\ignorespaces {Buzzer connection diagram}}}{150}{subfigure.2.2}%
+\contentsline {figure}{\numberline {8.3}{\ignorespaces A thermistor to read its values with Arduino Uno using a breadboard\relax }}{151}{figure.caption.111}%
+\contentsline {figure}{\numberline {8.4}{\ignorespaces A thermistor to control a buzzer with Arduino Uno using a breadboard\relax }}{152}{figure.caption.112}%
+\contentsline {figure}{\numberline {8.5}{\ignorespaces Xcos diagram to read thermistor values}}{160}{figure.caption.115}%
+\contentsline {figure}{\numberline {8.6}{\ignorespaces Plot window in Xcos to read thermistor values\relax }}{161}{figure.caption.117}%
+\contentsline {figure}{\numberline {8.7}{\ignorespaces Xcos diagram to read the value of thermistor, which is used to turn the buzzer on}}{161}{figure.caption.118}%
+\contentsline {figure}{\numberline {8.8}{\ignorespaces Plot window in Xcos to read thermistor values and the state of LED\relax }}{163}{figure.caption.120}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {9.1}{\ignorespaces Connecting servomotor to the shield attached on Arduino Uno\relax }}{174}{figure.caption.125}
-\contentsline {figure}{\numberline {9.2}{\ignorespaces A servomotor with Arduino Uno\ using a breadboard\relax }}{175}{figure.caption.127}
-\contentsline {figure}{\numberline {9.3}{\ignorespaces A servomotor and a potentiometer with Arduino Uno\ using a breadboard\relax }}{176}{figure.caption.128}
-\contentsline {figure}{\numberline {9.4}{\ignorespaces Rotating the servomotor by a fixed angle}}{184}{figure.caption.129}
-\contentsline {figure}{\numberline {9.5}{\ignorespaces Rotating the servomotor forward and then reverse}}{185}{figure.caption.131}
-\contentsline {figure}{\numberline {9.6}{\ignorespaces Rotating the servomotor in increments of $20^\circ $}}{186}{figure.caption.133}
-\contentsline {figure}{\numberline {9.7}{\ignorespaces Rotating the servomotor as suggested by the potentiometer}}{187}{figure.caption.135}
+\contentsline {figure}{\numberline {9.1}{\ignorespaces Connecting servomotor to the shield attached on Arduino Uno\relax }}{174}{figure.caption.125}%
+\contentsline {figure}{\numberline {9.2}{\ignorespaces A servomotor with Arduino Uno\ using a breadboard\relax }}{175}{figure.caption.127}%
+\contentsline {figure}{\numberline {9.3}{\ignorespaces A servomotor and a potentiometer with Arduino Uno\ using a breadboard\relax }}{176}{figure.caption.128}%
+\contentsline {figure}{\numberline {9.4}{\ignorespaces Rotating the servomotor by a fixed angle}}{184}{figure.caption.129}%
+\contentsline {figure}{\numberline {9.5}{\ignorespaces Rotating the servomotor forward and then reverse}}{185}{figure.caption.131}%
+\contentsline {figure}{\numberline {9.6}{\ignorespaces Rotating the servomotor in increments of $20^\circ $}}{186}{figure.caption.133}%
+\contentsline {figure}{\numberline {9.7}{\ignorespaces Rotating the servomotor as suggested by the potentiometer}}{187}{figure.caption.135}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {10.1}{\ignorespaces L293D motor driver board\relax }}{204}{figure.caption.137}
-\contentsline {figure}{\numberline {10.2}{\ignorespaces PWM pins on an Arduino Uno\ board\relax }}{205}{figure.caption.139}
-\contentsline {figure}{\numberline {10.3}{\ignorespaces A schematic of DC motor connections\relax }}{206}{figure.caption.140}
-\contentsline {figure}{\numberline {10.4}{\ignorespaces How to connect the DC motor to the Arduino Uno\ board\relax }}{206}{figure.caption.141}
-\contentsline {figure}{\numberline {10.5}{\ignorespaces Control of DC motor for a specified time from Xcos}}{214}{figure.caption.145}
-\contentsline {figure}{\numberline {10.6}{\ignorespaces Xcos control of the DC motor in forward and reverse directions}}{215}{figure.caption.147}
-\contentsline {figure}{\numberline {10.7}{\ignorespaces Xcos control of the DC motor in both directions in a loop}}{216}{figure.caption.149}
+\contentsline {figure}{\numberline {10.1}{\ignorespaces L293D motor driver board\relax }}{204}{figure.caption.137}%
+\contentsline {figure}{\numberline {10.2}{\ignorespaces PWM pins on an Arduino Uno\ board\relax }}{205}{figure.caption.139}%
+\contentsline {figure}{\numberline {10.3}{\ignorespaces A schematic of DC motor connections\relax }}{206}{figure.caption.140}%
+\contentsline {figure}{\numberline {10.4}{\ignorespaces How to connect the DC motor to the Arduino Uno\ board\relax }}{206}{figure.caption.141}%
+\contentsline {figure}{\numberline {10.5}{\ignorespaces Control of DC motor for a specified time from Xcos}}{214}{figure.caption.145}%
+\contentsline {figure}{\numberline {10.6}{\ignorespaces Xcos control of the DC motor in forward and reverse directions}}{215}{figure.caption.147}%
+\contentsline {figure}{\numberline {10.7}{\ignorespaces Xcos control of the DC motor in both directions in a loop}}{216}{figure.caption.149}%
 \addvspace {10\p@ }
-\contentsline {figure}{\numberline {11.1}{\ignorespaces Block diagram representation of the Protocol\relax }}{232}{figure.caption.157}
-\contentsline {figure}{\numberline {11.2}{\ignorespaces Master-Slave Query-Response Cycle\relax }}{232}{figure.caption.158}
-\contentsline {figure}{\numberline {11.3}{\ignorespaces Pins in RS485 module\relax }}{233}{figure.caption.160}
-\contentsline {figure}{\numberline {11.4}{\ignorespaces Block diagram for reading the parameters in energy meter\relax }}{238}{figure.caption.167}
-\contentsline {figure}{\numberline {11.5}{\ignorespaces Experimental set up for reading energy meter\relax }}{239}{figure.caption.168}
-\contentsline {figure}{\numberline {11.6}{\ignorespaces Flowchart of Arduino firmware\relax }}{240}{figure.caption.169}
-\contentsline {figure}{\numberline {11.7}{\ignorespaces Flowchart of the steps happening in the FLOSS code\relax }}{241}{figure.caption.170}
-\contentsline {figure}{\numberline {11.8}{\ignorespaces Single phase current output on Scilab Console\relax }}{245}{figure.caption.172}
-\contentsline {figure}{\numberline {11.9}{\ignorespaces Single phase current output in energy meter\relax }}{245}{figure.caption.173}
-\contentsline {figure}{\numberline {11.10}{\ignorespaces Single phase voltage output on Scilab Console\relax }}{246}{figure.caption.174}
-\contentsline {figure}{\numberline {11.11}{\ignorespaces Single phase voltage output in energy meter\relax }}{246}{figure.caption.175}
-\contentsline {figure}{\numberline {11.12}{\ignorespaces Single phase active power output on Scilab Console\relax }}{247}{figure.caption.176}
-\contentsline {figure}{\numberline {11.13}{\ignorespaces Single phase active power output in energy meter\relax }}{247}{figure.caption.177}
-\contentsline {figure}{\numberline {11.14}{\ignorespaces Xcos diagram to read Energy Meter values}}{248}{figure.caption.178}
+\contentsline {figure}{\numberline {11.1}{\ignorespaces Block diagram representation of the Protocol\relax }}{232}{figure.caption.157}%
+\contentsline {figure}{\numberline {11.2}{\ignorespaces Master-Slave Query-Response Cycle\relax }}{232}{figure.caption.158}%
+\contentsline {figure}{\numberline {11.3}{\ignorespaces Pins in RS485 module\relax }}{233}{figure.caption.160}%
+\contentsline {figure}{\numberline {11.4}{\ignorespaces Block diagram for reading the parameters in energy meter\relax }}{238}{figure.caption.167}%
+\contentsline {figure}{\numberline {11.5}{\ignorespaces Experimental set up for reading energy meter\relax }}{239}{figure.caption.168}%
+\contentsline {figure}{\numberline {11.6}{\ignorespaces Flowchart of Arduino firmware\relax }}{240}{figure.caption.169}%
+\contentsline {figure}{\numberline {11.7}{\ignorespaces Flowchart of the steps happening in the FLOSS code\relax }}{241}{figure.caption.170}%
+\contentsline {figure}{\numberline {11.8}{\ignorespaces Single phase current output on Scilab Console\relax }}{245}{figure.caption.172}%
+\contentsline {figure}{\numberline {11.9}{\ignorespaces Single phase current output in energy meter\relax }}{245}{figure.caption.173}%
+\contentsline {figure}{\numberline {11.10}{\ignorespaces Single phase voltage output on Scilab Console\relax }}{246}{figure.caption.174}%
+\contentsline {figure}{\numberline {11.11}{\ignorespaces Single phase voltage output in energy meter\relax }}{246}{figure.caption.175}%
+\contentsline {figure}{\numberline {11.12}{\ignorespaces Single phase active power output on Scilab Console\relax }}{247}{figure.caption.176}%
+\contentsline {figure}{\numberline {11.13}{\ignorespaces Single phase active power output in energy meter\relax }}{247}{figure.caption.177}%
+\contentsline {figure}{\numberline {11.14}{\ignorespaces Xcos diagram to read Energy Meter values}}{248}{figure.caption.178}%
diff --git a/floss-arduino.log b/floss-arduino.log
index 9d3628f..d45c808 100644
--- a/floss-arduino.log
+++ b/floss-arduino.log
@@ -1,512 +1,500 @@
-This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017) (preloaded format=pdflatex 2017.8.1)  23 MAY 2021 22:35
+This is pdfTeX, Version 3.14159265-2.6-1.40.20 (TeX Live 2019/Debian) (preloaded format=pdflatex 2020.11.5)  24 MAY 2021 02:05
 entering extended mode
  restricted \write18 enabled.
  %&-line parsing enabled.
 **floss-arduino.tex
 (./floss-arduino.tex
-LaTeX2e <2017-04-15>
-Babel <3.10> and hyphenation patterns for 84 language(s) loaded.
-(/usr/local/texlive/2017/texmf-dist/tex/latex/base/book.cls
-Document Class: book 2014/09/29 v1.4h Standard LaTeX document class
-(/usr/local/texlive/2017/texmf-dist/tex/latex/base/bk11.clo
-File: bk11.clo 2014/09/29 v1.4h Standard LaTeX file (size option)
-)
-\c@part=\count79
-\c@chapter=\count80
-\c@section=\count81
-\c@subsection=\count82
-\c@subsubsection=\count83
-\c@paragraph=\count84
-\c@subparagraph=\count85
-\c@figure=\count86
-\c@table=\count87
-\abovecaptionskip=\skip41
-\belowcaptionskip=\skip42
-\bibindent=\dimen102
-)
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/color.sty
-Package: color 2016/07/10 v1.1e Standard LaTeX Color (DPC)
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/color.cfg
+LaTeX2e <2020-02-02> patch level 2
+L3 programming layer <2020-02-14>
+(/usr/share/texlive/texmf-dist/tex/latex/base/book.cls
+Document Class: book 2019/12/20 v1.4l Standard LaTeX document class
+(/usr/share/texlive/texmf-dist/tex/latex/base/bk11.clo
+File: bk11.clo 2019/12/20 v1.4l Standard LaTeX file (size option)
+)
+\c@part=\count167
+\c@chapter=\count168
+\c@section=\count169
+\c@subsection=\count170
+\c@subsubsection=\count171
+\c@paragraph=\count172
+\c@subparagraph=\count173
+\c@figure=\count174
+\c@table=\count175
+\abovecaptionskip=\skip47
+\belowcaptionskip=\skip48
+\bibindent=\dimen134
+)
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty
+Package: color 2019/11/23 v1.2a Standard LaTeX Color (DPC)
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
 File: color.cfg 2016/01/02 v1.6 sample color configuration
 )
 Package color Info: Driver file: pdftex.def on input line 147.
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics-def/pdftex.def
-File: pdftex.def 2017/01/12 v0.06k Graphics/color for pdfTeX
-
-(/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/infwarerr.sty
-Package: infwarerr 2016/05/16 v1.4 Providing info/warning/error messages (HO)
-)
-(/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
-Package: ltxcmds 2016/05/16 v1.23 LaTeX kernel commands for general use (HO)
-)
-\Gread@gobject=\count88
+(/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
+File: pdftex.def 2018/01/08 v1.0l Graphics/color driver for pdftex
 ))
-(/usr/local/texlive/2017/texmf-dist/tex/latex/layouts/layouts.sty
+(/usr/share/texlive/texmf-dist/tex/latex/layouts/layouts.sty
 Package: layouts 2009/09/02 v2.6d graphical depiction of document elements
-\l@ylen=\skip43
-\layoutsbox=\box26
-\l@youtunitlength=\skip44
-\l@youtlinethick=\skip45
-\l@youtlinethickii=\skip46
-\l@ysetupparskip=\skip47
-\l@ysetupbaselineskip=\skip48
-\l@yonem=\skip49
-\l@yonex=\skip50
-\l@ylmarg=\skip51
-\l@yrmarg=\skip52
-\l@yitmindent=\skip53
-\l@ylblwidth=\skip54
-\l@ylblsep=\skip55
-\l@ylparindent=\skip56
-\l@ytsep=\skip57
-\l@ypskip=\skip58
-\l@yptsep=\skip59
-\l@ypsep=\skip60
-\l@yitmsep=\skip61
+\l@ylen=\skip49
+\layoutsbox=\box45
+\l@youtunitlength=\skip50
+\l@youtlinethick=\skip51
+\l@youtlinethickii=\skip52
+\l@ysetupparskip=\skip53
+\l@ysetupbaselineskip=\skip54
+\l@yonem=\skip55
+\l@yonex=\skip56
+\l@ylmarg=\skip57
+\l@yrmarg=\skip58
+\l@yitmindent=\skip59
+\l@ylblwidth=\skip60
+\l@ylblsep=\skip61
+\l@ylparindent=\skip62
+\l@ytsep=\skip63
+\l@ypskip=\skip64
+\l@yptsep=\skip65
+\l@ypsep=\skip66
+\l@yitmsep=\skip67
 \l@ytok=\toks14
-\l@youtpw=\count89
-\l@youtph=\count90
-\l@youthpi=\count91
-\l@youthpii=\count92
-\l@youthpiii=\count93
-\l@youthpiv=\count94
-\l@youthpv=\count95
-\l@youthpvi=\count96
-\l@youthpvii=\count97
-\l@youtparskip=\count98
-\l@youtvpi=\count99
-\l@youtvpii=\count100
-\l@youtvpiii=\count101
-\l@youtvpiv=\count102
-\l@youtvpv=\count103
-\l@youtvpvi=\count104
-\l@youtvpvii=\count105
-\l@youthdo=\count106
-\l@youthdi=\count107
-\l@youthdii=\count108
-\l@youthdiii=\count109
-\l@youthdiv=\count110
-\l@youthdv=\count111
-\l@youthdvi=\count112
-\l@youthdvii=\count113
-\l@youtvdo=\count114
-\l@youtvdi=\count115
-\l@youtvdii=\count116
-\l@youtvdiii=\count117
-\l@youtvdiv=\count118
-\l@youtvdv=\count119
-\l@youtvdvi=\count120
-\l@youtvdvii=\count121
-\l@youtvdviii=\count122
-\l@youtxci=\count123
-\l@youtxcii=\count124
-\l@youtxciii=\count125
-\l@youtxciv=\count126
-\l@youtxcv=\count127
-\l@youtxcvi=\count128
-\l@youtyci=\count129
-\l@youtycii=\count130
-\l@youtyciii=\count131
-\l@youtyciv=\count132
-\l@youtycv=\count133
-\l@youtycvi=\count134
-\l@youtycvii=\count135
-\l@youtycviii=\count136
-\l@youtxco=\count137
-\l@youtyco=\count138
-\l@ytempdima=\skip62
-\stockwidth=\skip63
-\stockheight=\skip64
-\trimedge=\skip65
-\trimtop=\skip66
-\uppermargin=\skip67
-\spinemargin=\skip68
-)
-(/Users/kannan/Library/texmf/tex/latex/cclicenses/cclicenses.sty
+\l@youtpw=\count176
+\l@youtph=\count177
+\l@youthpi=\count178
+\l@youthpii=\count179
+\l@youthpiii=\count180
+\l@youthpiv=\count181
+\l@youthpv=\count182
+\l@youthpvi=\count183
+\l@youthpvii=\count184
+\l@youtparskip=\count185
+\l@youtvpi=\count186
+\l@youtvpii=\count187
+\l@youtvpiii=\count188
+\l@youtvpiv=\count189
+\l@youtvpv=\count190
+\l@youtvpvi=\count191
+\l@youtvpvii=\count192
+\l@youthdo=\count193
+\l@youthdi=\count194
+\l@youthdii=\count195
+\l@youthdiii=\count196
+\l@youthdiv=\count197
+\l@youthdv=\count198
+\l@youthdvi=\count199
+\l@youthdvii=\count266
+\l@youtvdo=\count267
+\l@youtvdi=\count268
+\l@youtvdii=\count269
+\l@youtvdiii=\count270
+\l@youtvdiv=\count271
+\l@youtvdv=\count272
+\l@youtvdvi=\count273
+\l@youtvdvii=\count274
+\l@youtvdviii=\count275
+\l@youtxci=\count276
+\l@youtxcii=\count277
+\l@youtxciii=\count278
+\l@youtxciv=\count279
+\l@youtxcv=\count280
+\l@youtxcvi=\count281
+\l@youtyci=\count282
+\l@youtycii=\count283
+\l@youtyciii=\count284
+\l@youtyciv=\count285
+\l@youtycv=\count286
+\l@youtycvi=\count287
+\l@youtycvii=\count288
+\l@youtycviii=\count289
+\l@youtxco=\count290
+\l@youtyco=\count291
+\l@ytempdima=\skip68
+\stockwidth=\skip69
+\stockheight=\skip70
+\trimedge=\skip71
+\trimtop=\skip72
+\uppermargin=\skip73
+\spinemargin=\skip74
+)
+(/usr/share/texlive/texmf-dist/tex/latex/cclicenses/cclicenses.sty
 Package: cclicenses 2005/05/20 v0.4 CC licenses typesetting
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/rotating.sty
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/rotating.sty
 Package: rotating 2016/08/11 v2.16d rotated objects in LaTeX
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphicx.sty
-Package: graphicx 2014/10/28 v1.0g Enhanced LaTeX Graphics (DPC,SPQR)
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
+Package: graphicx 2019/11/30 v1.2a Enhanced LaTeX Graphics (DPC,SPQR)
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/keyval.sty
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
 Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
 \KV@toks@=\toks15
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/graphics.sty
-Package: graphics 2017/04/14 v1.1b Standard LaTeX Graphics (DPC,SPQR)
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
+Package: graphics 2019/11/30 v1.4a Standard LaTeX Graphics (DPC,SPQR)
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics/trig.sty
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
 Package: trig 2016/01/03 v1.10 sin cos tan (DPC)
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
+(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
 File: graphics.cfg 2016/06/04 v1.11 sample graphics configuration
 )
-Package graphics Info: Driver file: pdftex.def on input line 99.
+Package graphics Info: Driver file: pdftex.def on input line 105.
 )
-\Gin@req@height=\dimen103
-\Gin@req@width=\dimen104
+\Gin@req@height=\dimen135
+\Gin@req@width=\dimen136
 )
-(/Users/kannan/Library/texmf/tex/latex/ifthen/ifthen.sty
-Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC)
+(/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty
+Package: ifthen 2014/09/29 v1.1c Standard LaTeX ifthen package (DPC)
 )
-\c@r@tfl@t=\count139
-\rotFPtop=\skip69
-\rotFPbot=\skip70
-\rot@float@box=\box27
+\c@r@tfl@t=\count292
+\rotFPtop=\skip75
+\rotFPbot=\skip76
+\rot@float@box=\box46
 \rot@mess@toks=\toks16
 )
-\chardim=\dimen105
-\hdim=\dimen106
-\htmp=\dimen107
-\hpos=\count140
-\vpos=\count141
-)
-(/Users/kannan/Library/texmf/tex/latex/morefloats.sty
-\bx@S=\insert199
-\bx@T=\insert198
-\bx@U=\insert197
-\bx@V=\insert196
-\bx@W=\insert195
-\bx@X=\insert194
-\bx@Y=\insert193
-\bx@Z=\insert192
-\bx@AA=\insert191
-\bx@BB=\insert190
-\bx@CC=\insert189
-\bx@DD=\insert188
-\bx@EE=\insert187
-\bx@FF=\insert186
-\bx@GG=\insert185
-\bx@HH=\insert184
-\bx@II=\insert183
-\bx@JJ=\insert182
-)
-(/usr/local/texlive/2017/texmf-dist/tex/latex/paralist/paralist.sty
+\chardim=\dimen137
+\hdim=\dimen138
+\htmp=\dimen139
+\hpos=\count293
+\vpos=\count294
+)
+(/usr/share/texlive/texmf-dist/tex/latex/morefloats/morefloats.sty
+Package: morefloats 2015/07/22 v1.0h Raise limit of unprocessed floats (HMM)
+
+(/usr/share/texlive/texmf-dist/tex/latex/kvoptions/kvoptions.sty
+Package: kvoptions 2019/11/29 v3.13 Key value format for package options (HO)
+
+(/usr/share/texlive/texmf-dist/tex/generic/ltxcmds/ltxcmds.sty
+Package: ltxcmds 2019/12/15 v1.24 LaTeX kernel commands for general use (HO)
+)
+(/usr/share/texlive/texmf-dist/tex/generic/kvsetkeys/kvsetkeys.sty
+Package: kvsetkeys 2019/12/15 v1.18 Key value parser (HO)
+))
+Package morefloats Info: Maximum number of possible floats asked for: 36
+(morefloats)             (i.e. 18 more floats).
+(morefloats)             LaTeX might run out of memory before this
+(morefloats)             (in which case it will notify you).
+)
+(/usr/share/texlive/texmf-dist/tex/latex/paralist/paralist.sty
 Package: paralist 2017/01/22 v2.7 Extended list environments
-\pltopsep=\skip71
-\plpartopsep=\skip72
-\plitemsep=\skip73
-\plparsep=\skip74
+\pltopsep=\skip77
+\plpartopsep=\skip78
+\plitemsep=\skip79
+\plparsep=\skip80
 \pl@lab=\toks17
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/chngcntr/chngcntr.sty
-Package: chngcntr 2009/09/02 v1.0a change counter resetting
-)
-(/usr/local/texlive/2017/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
-Package: fancyhdr 2016/09/06 3.8 Extensive control of page headers and footers
-\fancy@headwidth=\skip75
-\f@ncyO@elh=\skip76
-\f@ncyO@erh=\skip77
-\f@ncyO@olh=\skip78
-\f@ncyO@orh=\skip79
-\f@ncyO@elf=\skip80
-\f@ncyO@erf=\skip81
-\f@ncyO@olf=\skip82
-\f@ncyO@orf=\skip83
-)
-(/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsmath.sty
-Package: amsmath 2016/11/05 v2.16a AMS math features
-\@mathmargin=\skip84
+(/usr/share/texlive/texmf-dist/tex/latex/chngcntr/chngcntr.sty
+Package: chngcntr 2018/04/09 v1.1a change counter resetting
+Package chngcntr Info: \counterwithout already defined.
+(chngcntr)             Quitting chngcntr on input line 21.
+)
+(/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
+Package: fancyhdr 2019/01/31 v3.10 Extensive control of page headers and footer
+s
+\f@nch@headwidth=\skip81
+\f@nch@O@elh=\skip82
+\f@nch@O@erh=\skip83
+\f@nch@O@olh=\skip84
+\f@nch@O@orh=\skip85
+\f@nch@O@elf=\skip86
+\f@nch@O@erf=\skip87
+\f@nch@O@olf=\skip88
+\f@nch@O@orf=\skip89
+)
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
+Package: amsmath 2020/01/20 v2.17e AMS math features
+\@mathmargin=\skip90
 
 For additional information on amsmath, use the `?' option.
-(/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amstext.sty
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty
 Package: amstext 2000/06/29 v2.01 AMS text
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsgen.sty
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
 File: amsgen.sty 1999/11/30 v2.0 generic functions
 \@emptytoks=\toks18
-\ex@=\dimen108
+\ex@=\dimen140
 ))
-(/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsbsy.sty
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
 Package: amsbsy 1999/11/29 v1.2d Bold Symbols
-\pmbraise@=\dimen109
+\pmbraise@=\dimen141
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/amsmath/amsopn.sty
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
 Package: amsopn 2016/03/08 v2.02 operator names
 )
-\inf@bad=\count142
-LaTeX Info: Redefining \frac on input line 213.
-\uproot@=\count143
-\leftroot@=\count144
-LaTeX Info: Redefining \overline on input line 375.
-\classnum@=\count145
-\DOTSCASE@=\count146
-LaTeX Info: Redefining \ldots on input line 472.
-LaTeX Info: Redefining \dots on input line 475.
-LaTeX Info: Redefining \cdots on input line 596.
-\Mathstrutbox@=\box28
-\strutbox@=\box29
-\big@size=\dimen110
-LaTeX Font Info:    Redeclaring font encoding OML on input line 712.
-LaTeX Font Info:    Redeclaring font encoding OMS on input line 713.
-\macc@depth=\count147
-\c@MaxMatrixCols=\count148
-\dotsspace@=\muskip10
-\c@parentequation=\count149
-\dspbrk@lvl=\count150
+\inf@bad=\count295
+LaTeX Info: Redefining \frac on input line 227.
+\uproot@=\count296
+\leftroot@=\count297
+LaTeX Info: Redefining \overline on input line 389.
+\classnum@=\count298
+\DOTSCASE@=\count299
+LaTeX Info: Redefining \ldots on input line 486.
+LaTeX Info: Redefining \dots on input line 489.
+LaTeX Info: Redefining \cdots on input line 610.
+\Mathstrutbox@=\box47
+\strutbox@=\box48
+\big@size=\dimen142
+LaTeX Font Info:    Redeclaring font encoding OML on input line 733.
+LaTeX Font Info:    Redeclaring font encoding OMS on input line 734.
+\macc@depth=\count300
+\c@MaxMatrixCols=\count301
+\dotsspace@=\muskip16
+\c@parentequation=\count302
+\dspbrk@lvl=\count303
 \tag@help=\toks19
-\row@=\count151
-\column@=\count152
-\maxfields@=\count153
+\row@=\count304
+\column@=\count305
+\maxfields@=\count306
 \andhelp@=\toks20
-\eqnshift@=\dimen111
-\alignsep@=\dimen112
-\tagshift@=\dimen113
-\tagwidth@=\dimen114
-\totwidth@=\dimen115
-\lineht@=\dimen116
+\eqnshift@=\dimen143
+\alignsep@=\dimen144
+\tagshift@=\dimen145
+\tagwidth@=\dimen146
+\totwidth@=\dimen147
+\lineht@=\dimen148
 \@envbody=\toks21
-\multlinegap=\skip85
-\multlinetaggap=\skip86
+\multlinegap=\skip91
+\multlinetaggap=\skip92
 \mathdisplay@stack=\toks22
-LaTeX Info: Redefining \[ on input line 2817.
-LaTeX Info: Redefining \] on input line 2818.
+LaTeX Info: Redefining \[ on input line 2859.
+LaTeX Info: Redefining \] on input line 2860.
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/base/makeidx.sty
+(/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty
 Package: makeidx 2014/09/29 v1.0m Standard LaTeX package
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/fancybox/fancybox.sty
+(/usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty
 Package: fancybox 2010/05/15 1.4
 
 Style option: `fancybox' v1.4 <2010/05/15> (tvz)
-\@fancybox=\box30
-\shadowsize=\dimen117
-\@Sbox=\box31
+\@fancybox=\box49
+\shadowsize=\dimen149
+\@Sbox=\box50
 \do@VerbBox=\toks23
 \the@fancyput=\toks24
 \this@fancyput=\toks25
 \EndVerbatimTokens=\toks26
 \Verbatim@Outfile=\write3
-\Verbatim@Infile=\read1
-) (/usr/local/texlive/2017/texmf-dist/tex/latex/cite/cite.sty
+\Verbatim@Infile=\read2
+) (/usr/share/texlive/texmf-dist/tex/latex/cite/cite.sty
 LaTeX Info: Redefining \cite on input line 302.
 LaTeX Info: Redefining \nocite on input line 332.
 Package: cite 2015/02/27  v 5.5
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hyperref.sty
-Package: hyperref 2017/03/14 v6.85a Hypertext links for LaTeX
-
-(/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
-Package: hobsub-hyperref 2016/05/16 v1.14 Bundle oberdiek, subset hyperref (HO)
-
-
-(/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty
-Package: hobsub-generic 2016/05/16 v1.14 Bundle oberdiek, subset generic (HO)
-Package: hobsub 2016/05/16 v1.14 Construct package bundles (HO)
-Package hobsub Info: Skipping package `infwarerr' (already loaded).
-Package hobsub Info: Skipping package `ltxcmds' (already loaded).
-Package: ifluatex 2016/05/16 v1.4 Provides the ifluatex switch (HO)
-Package ifluatex Info: LuaTeX not detected.
-Package: ifvtex 2016/05/16 v1.6 Detect VTeX and its facilities (HO)
-Package ifvtex Info: VTeX not detected.
-Package: intcalc 2016/05/16 v1.2 Expandable calculations with integers (HO)
-Package: ifpdf 2017/03/15 v3.2 Provides the ifpdf switch
-Package: etexcmds 2016/05/16 v1.6 Avoid name clashes with e-TeX commands (HO)
-Package etexcmds Info: Could not find \expanded.
-(etexcmds)             That can mean that you are not using pdfTeX 1.50 or
-(etexcmds)             that some package has redefined \expanded.
-(etexcmds)             In the latter case, load this package earlier.
-Package: kvsetkeys 2016/05/16 v1.17 Key value parser (HO)
-Package: kvdefinekeys 2016/05/16 v1.4 Define keys (HO)
-Package: pdftexcmds 2017/03/19 v0.25 Utility functions of pdfTeX for LuaTeX (HO
-)
-Package pdftexcmds Info: LuaTeX not detected.
+(/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty
+Package: hyperref 2020/01/14 v7.00d Hypertext links for LaTeX
+
+(/usr/share/texlive/texmf-dist/tex/generic/iftex/iftex.sty
+Package: iftex 2019/11/07 v1.0c TeX engine tests
+)
+(/usr/share/texlive/texmf-dist/tex/latex/pdftexcmds/pdftexcmds.sty
+Package: pdftexcmds 2019/11/24 v0.31 Utility functions of pdfTeX for LuaTeX (HO
+)
+
+(/usr/share/texlive/texmf-dist/tex/generic/infwarerr/infwarerr.sty
+Package: infwarerr 2019/12/03 v1.5 Providing info/warning/error messages (HO)
+)
 Package pdftexcmds Info: \pdf@primitive is available.
 Package pdftexcmds Info: \pdf@ifprimitive is available.
 Package pdftexcmds Info: \pdfdraftmode found.
-Package: pdfescape 2016/05/16 v1.14 Implements pdfTeX's escape features (HO)
-Package: bigintcalc 2016/05/16 v1.4 Expandable calculations on big integers (HO
 )
-Package: bitset 2016/05/16 v1.2 Handle bit-vector datatype (HO)
-Package: uniquecounter 2016/05/16 v1.3 Provide unlimited unique counter (HO)
+(/usr/share/texlive/texmf-dist/tex/generic/kvdefinekeys/kvdefinekeys.sty
+Package: kvdefinekeys 2019-12-19 v1.6 Define keys (HO)
 )
-Package hobsub Info: Skipping package `hobsub' (already loaded).
-Package: letltxmacro 2016/05/16 v1.5 Let assignment for LaTeX macros (HO)
-Package: hopatch 2016/05/16 v1.3 Wrapper for package hooks (HO)
-Package: xcolor-patch 2016/05/16 xcolor patch
-Package: atveryend 2016/05/16 v1.9 Hooks at the very end of document (HO)
-Package atveryend Info: \enddocument detected (standard20110627).
-Package: atbegshi 2016/06/09 v1.18 At begin shipout hook (HO)
-Package: refcount 2016/05/16 v3.5 Data extraction from label references (HO)
-Package: hycolor 2016/05/16 v1.8 Color options for hyperref/bookmark (HO)
+(/usr/share/texlive/texmf-dist/tex/generic/pdfescape/pdfescape.sty
+Package: pdfescape 2019/12/09 v1.15 Implements pdfTeX's escape features (HO)
 )
-(/usr/local/texlive/2017/texmf-dist/tex/generic/ifxetex/ifxetex.sty
-Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
+(/usr/share/texlive/texmf-dist/tex/latex/hycolor/hycolor.sty
+Package: hycolor 2020-01-27 v1.10 Color options for hyperref/bookmark (HO)
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/auxhook.sty
-Package: auxhook 2016/05/16 v1.4 Hooks for auxiliary files (HO)
+(/usr/share/texlive/texmf-dist/tex/latex/letltxmacro/letltxmacro.sty
+Package: letltxmacro 2019/12/03 v1.6 Let assignment for LaTeX macros (HO)
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/kvoptions.sty
-Package: kvoptions 2016/05/16 v3.12 Key value format for package options (HO)
+(/usr/share/texlive/texmf-dist/tex/latex/auxhook/auxhook.sty
+Package: auxhook 2019-12-17 v1.6 Hooks for auxiliary files (HO)
 )
-\@linkdim=\dimen118
-\Hy@linkcounter=\count154
-\Hy@pagecounter=\count155
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/pd1enc.def
-File: pd1enc.def 2017/03/14 v6.85a Hyperref: PDFDocEncoding definition (HO)
+\@linkdim=\dimen150
+\Hy@linkcounter=\count307
+\Hy@pagecounter=\count308
+
+(/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def
+File: pd1enc.def 2020/01/14 v7.00d Hyperref: PDFDocEncoding definition (HO)
+Now handling font encoding PD1 ...
+... no UTF-8 mapping file for font encoding PD1
 )
-\Hy@SavedSpaceFactor=\count156
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/hyperref.cfg
-File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
+(/usr/share/texlive/texmf-dist/tex/generic/intcalc/intcalc.sty
+Package: intcalc 2019/12/15 v1.3 Expandable calculations with integers (HO)
+)
+(/usr/share/texlive/texmf-dist/tex/generic/etexcmds/etexcmds.sty
+Package: etexcmds 2019/12/15 v1.7 Avoid name clashes with e-TeX commands (HO)
 )
-Package hyperref Info: Hyper figures OFF on input line 4498.
-Package hyperref Info: Link nesting OFF on input line 4503.
-Package hyperref Info: Hyper index ON on input line 4506.
-Package hyperref Info: Plain pages OFF on input line 4513.
-Package hyperref Info: Backreferencing OFF on input line 4518.
+\Hy@SavedSpaceFactor=\count309
+\pdfmajorversion=\count310
+Package hyperref Info: Hyper figures OFF on input line 4547.
+Package hyperref Info: Link nesting OFF on input line 4552.
+Package hyperref Info: Hyper index ON on input line 4555.
+Package hyperref Info: Plain pages OFF on input line 4562.
+Package hyperref Info: Backreferencing OFF on input line 4567.
 Package hyperref Info: Implicit mode ON; LaTeX internals redefined.
-Package hyperref Info: Bookmarks ON on input line 4751.
-\c@Hy@tempcnt=\count157
+Package hyperref Info: Bookmarks ON on input line 4800.
+\c@Hy@tempcnt=\count311
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/url/url.sty
-\Urlmuskip=\muskip11
+(/usr/share/texlive/texmf-dist/tex/latex/url/url.sty
+\Urlmuskip=\muskip17
 Package: url 2013/09/16  ver 3.4  Verb mode for urls, etc.
 )
-LaTeX Info: Redefining \url on input line 5104.
-\XeTeXLinkMargin=\dimen119
-\Fld@menulength=\count158
-\Field@Width=\dimen120
-\Fld@charsize=\dimen121
-Package hyperref Info: Hyper figures OFF on input line 6358.
-Package hyperref Info: Link nesting OFF on input line 6363.
-Package hyperref Info: Hyper index ON on input line 6366.
-Package hyperref Info: backreferencing OFF on input line 6373.
-Package hyperref Info: Link coloring OFF on input line 6378.
-Package hyperref Info: Link coloring with OCG OFF on input line 6383.
-Package hyperref Info: PDF/A mode OFF on input line 6388.
-LaTeX Info: Redefining \ref on input line 6428.
-LaTeX Info: Redefining \pageref on input line 6432.
-\Hy@abspage=\count159
-\c@Item=\count160
-\c@Hfootnote=\count161
-)
-
-Package hyperref Message: Driver (autodetected): hpdftex.
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/hpdftex.def
-File: hpdftex.def 2017/03/14 v6.85a Hyperref driver for pdfTeX
-\Fld@listcount=\count162
-\c@bookmark@seq@number=\count163
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty
-Package: rerunfilecheck 2016/05/16 v1.8 Rerun checks for auxiliary files (HO)
+LaTeX Info: Redefining \url on input line 5159.
+\XeTeXLinkMargin=\dimen151
+
+(/usr/share/texlive/texmf-dist/tex/generic/bitset/bitset.sty
+Package: bitset 2019/12/09 v1.3 Handle bit-vector datatype (HO)
+
+(/usr/share/texlive/texmf-dist/tex/generic/bigintcalc/bigintcalc.sty
+Package: bigintcalc 2019/12/15 v1.5 Expandable calculations on big integers (HO
+)
+))
+\Fld@menulength=\count312
+\Field@Width=\dimen152
+\Fld@charsize=\dimen153
+Package hyperref Info: Hyper figures OFF on input line 6430.
+Package hyperref Info: Link nesting OFF on input line 6435.
+Package hyperref Info: Hyper index ON on input line 6438.
+Package hyperref Info: backreferencing OFF on input line 6445.
+Package hyperref Info: Link coloring OFF on input line 6450.
+Package hyperref Info: Link coloring with OCG OFF on input line 6455.
+Package hyperref Info: PDF/A mode OFF on input line 6460.
+LaTeX Info: Redefining \ref on input line 6500.
+LaTeX Info: Redefining \pageref on input line 6504.
+
+(/usr/share/texlive/texmf-dist/tex/generic/atbegshi/atbegshi.sty
+Package: atbegshi 2019/12/05 v1.19 At begin shipout hook (HO)
+)
+\Hy@abspage=\count313
+\c@Item=\count314
+\c@Hfootnote=\count315
+)
+Package hyperref Info: Driver (autodetected): hpdftex.
+
+(/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def
+File: hpdftex.def 2020/01/14 v7.00d Hyperref driver for pdfTeX
+
+(/usr/share/texlive/texmf-dist/tex/latex/atveryend/atveryend.sty
+Package: atveryend 2019-12-11 v1.11 Hooks at the very end of document (HO)
+Package atveryend Info: \enddocument detected (standard20110627).
+)
+\Fld@listcount=\count316
+\c@bookmark@seq@number=\count317
+
+(/usr/share/texlive/texmf-dist/tex/latex/rerunfilecheck/rerunfilecheck.sty
+Package: rerunfilecheck 2019/12/05 v1.9 Rerun checks for auxiliary files (HO)
+
+(/usr/share/texlive/texmf-dist/tex/generic/uniquecounter/uniquecounter.sty
+Package: uniquecounter 2019/12/15 v1.4 Provide unlimited unique counter (HO)
+)
 Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 2
-82.
+86.
 )
-\Hy@SectionHShift=\skip87
+\Hy@SectionHShift=\skip93
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/subfig/subfig.sty
+(/usr/share/texlive/texmf-dist/tex/latex/subfig/subfig.sty
 Package: subfig 2005/06/28 ver: 1.3 subfig package
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption.sty
-Package: caption 2016/02/21 v3.3-144 Customizing captions (AR)
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/caption/caption3.sty
-Package: caption3 2016/05/22 v1.7-166 caption3 kernel (AR)
-Package caption3 Info: TeX engine: e-TeX on input line 67.
-\captionmargin=\dimen122
-\captionmargin@=\dimen123
-\captionwidth=\dimen124
-\caption@tempdima=\dimen125
-\caption@indent=\dimen126
-\caption@parindent=\dimen127
-\caption@hangindent=\dimen128
-)
-\c@ContinuedFloat=\count164
+(/usr/share/texlive/texmf-dist/tex/latex/caption/caption.sty
+Package: caption 2020/01/03 v3.4h Customizing captions (AR)
+
+(/usr/share/texlive/texmf-dist/tex/latex/caption/caption3.sty
+Package: caption3 2020/01/03 v1.8h caption3 kernel (AR)
+Package caption3 Info: TeX engine: e-TeX on input line 61.
+\captionmargin=\dimen154
+\captionmargin@=\dimen155
+\captionwidth=\dimen156
+\caption@tempdima=\dimen157
+\caption@indent=\dimen158
+\caption@parindent=\dimen159
+\caption@hangindent=\dimen160
+Package caption Info: Standard document class detected.
+)
+\c@caption@flags=\count318
+\c@continuedfloat=\count319
 Package caption Info: hyperref package is loaded.
 Package caption Info: rotating package is loaded.
 )
-\c@KVtest=\count165
-\sf@farskip=\skip88
-\sf@captopadj=\dimen129
-\sf@capskip=\skip89
-\sf@nearskip=\skip90
-\c@subfigure=\count166
-\c@subfigure@save=\count167
-\c@lofdepth=\count168
-\c@subtable=\count169
-\c@subtable@save=\count170
-\c@lotdepth=\count171
-\sf@top=\skip91
-\sf@bottom=\skip92
-)
-(/Users/kannan/Library/texmf/tex/latex/listings/listings.sty
-Package: listings 2004/02/13 1.2 (Carsten Heinz)
-\lst@mode=\count172
-\lst@gtempboxa=\box32
+\c@KVtest=\count320
+\sf@farskip=\skip94
+\sf@captopadj=\dimen161
+\sf@capskip=\skip95
+\sf@nearskip=\skip96
+\c@subfigure=\count321
+\c@subfigure@save=\count322
+\c@lofdepth=\count323
+\c@subtable=\count324
+\c@subtable@save=\count325
+\c@lotdepth=\count326
+\sf@top=\skip97
+\sf@bottom=\skip98
+)
+(/usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty
+\lst@mode=\count327
+\lst@gtempboxa=\box51
 \lst@token=\toks27
-\lst@length=\count173
-\lst@currlwidth=\dimen130
-\lst@column=\count174
-\lst@pos=\count175
-\lst@lostspace=\dimen131
-\lst@width=\dimen132
-\lst@newlines=\count176
-\lst@lineno=\count177
-\c@lstlisting=\count178
-\lst@maxwidth=\dimen133
-
-(/Users/kannan/Library/texmf/tex/latex/listings/lstpatch.sty
-File: lstpatch.sty 2004/02/18 1.2b (Carsten Heinz)
-)
-(/Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty
-File: lstmisc.sty 2004/02/13 1.2 (Carsten Heinz)
-\c@lstnumber=\count179
-\lst@skipnumbers=\count180
-\lst@framebox=\box33
-)
-(/Users/kannan/Library/texmf/tex/latex/listings/listings.cfg
-File: listings.cfg 2004/02/13 1.2 listings configuration
-))
-(/Users/kannan/Library/texmf/tex/latex/listings/varioref/varioref.sty
-Package: varioref 2004/02/27 v1.4i package for extended references (FMi)
-\c@vrcnt=\count181
+\lst@length=\count328
+\lst@currlwidth=\dimen162
+\lst@column=\count329
+\lst@pos=\count330
+\lst@lostspace=\dimen163
+\lst@width=\dimen164
+\lst@newlines=\count331
+\lst@lineno=\count332
+\lst@maxwidth=\dimen165
+
+(/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+File: lstmisc.sty 2019/09/10 1.8c (Carsten Heinz)
+\c@lstnumber=\count333
+\lst@skipnumbers=\count334
+\lst@framebox=\box52
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/base/fontenc.sty
-Package: fontenc 2017/04/05 v2.0i Standard LaTeX package
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/base/t1enc.def
-File: t1enc.def 2017/04/05 v2.0i Standard LaTeX file
-LaTeX Font Info:    Redeclaring font encoding T1 on input line 48.
+(/usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg
+File: listings.cfg 2019/09/10 1.8c listings configuration
 ))
-(/usr/local/texlive/2017/texmf-dist/tex/latex/bera/beramono.sty
+Package: listings 2019/09/10 1.8c (Carsten Heinz)
+
+(/usr/share/texlive/texmf-dist/tex/latex/tools/varioref.sty
+Package: varioref 2020/01/23 v1.6c package for extended references (FMi)
+\c@vrcnt=\count335
+)
+(/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty
+Package: fontenc 2020/02/11 v2.0o Standard LaTeX package
+)
+(/usr/share/texlive/texmf-dist/tex/latex/bera/beramono.sty
 Package: beramono 2004/01/31 (WaS)
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/seqsplit/seqsplit.sty
+(/usr/share/texlive/texmf-dist/tex/latex/seqsplit/seqsplit.sty
 Package: seqsplit 2006/08/07 v0.1 Splitting long sequences (DNA, RNA, proteins,
  etc.) 
 )
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/suppl/styles.tex
-(/usr/local/texlive/2017/texmf-dist/tex/latex/ntheorem/ntheorem.sty
+(/home/fossee/Desktop/floss-scilab-arduino/suppl/styles.tex
+(/usr/share/texlive/texmf-dist/tex/latex/ntheorem/ntheorem.sty
 Style `ntheorem', Version 1.33 <2011/08/15>
 Package: ntheorem 2011/08/15 1.33
 \theorem@style=\toks28
 \theorem@@style=\toks29
 \theorembodyfont=\toks30
 \theoremnumbering=\toks31
-\theorempreskipamount=\skip93
-\theorempostskipamount=\skip94
-\theoremframepreskipamount=\skip95
-\theoremframepostskipamount=\skip96
-\theoreminframepreskipamount=\skip97
-\theoreminframepostskipamount=\skip98
+\theorempreskipamount=\skip99
+\theorempostskipamount=\skip100
+\theoremframepreskipamount=\skip101
+\theoremframepostskipamount=\skip102
+\theoreminframepreskipamount=\skip103
+\theoreminframepostskipamount=\skip104
 \theorem@preskip=\toks32
 \theorem@postskip=\toks33
 \theorem@framepreskip=\toks34
 \theorem@framepostskip=\toks35
 \theorem@inframepreskip=\toks36
 \theorem@inframepostskip=\toks37
-\theoremindent=\dimen134
-\theorem@indent=\dimen135
-\theoremrightindent=\dimen136
-\theorem@rightindent=\dimen137
+\theoremindent=\dimen166
+\theorem@indent=\dimen167
+\theoremrightindent=\dimen168
+\theorem@rightindent=\dimen169
 \theoremheaderfont=\toks38
 \theoremseparator=\toks39
 \theoremprework=\toks40
@@ -515,41 +503,48 @@ Package: ntheorem 2011/08/15 1.33
 \qedsymbol=\toks43
 \theoremkeyword=\toks44
 \qedsymbol=\toks45
-\thm@topsep=\skip99
-\thm@topsepadd=\skip100
+\thm@topsep=\skip105
+\thm@topsepadd=\skip106
 )
-\c@codemass=\count266
-\c@ardmass=\count267
-\c@pymass=\count268
-\c@juliamass=\count269
-\c@OpenModelicamass=\count270
- (/Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty
-File: lstlang1.sty 2004/02/13 1.2 listings language file
+\c@codemass=\count336
+\c@ardmass=\count337
+\c@pymass=\count338
+\c@juliamass=\count339
+\c@OpenModelicamass=\count340
+ (/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+File: lstlang1.sty 2019/09/10 1.8c listings language file
 )
-(/Users/kannan/Library/texmf/tex/latex/listings/lstlang1.sty
-File: lstlang1.sty 2004/02/13 1.2 listings language file
+(/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+File: lstlang1.sty 2019/09/10 1.8c listings language file
 )
-(/Users/kannan/Library/texmf/tex/latex/listings/lstmisc.sty
-File: lstmisc.sty 2004/02/13 1.2 (Carsten Heinz)
+(/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+File: lstmisc.sty 2019/09/10 1.8c (Carsten Heinz)
 )
-(/usr/local/texlive/2017/texmf-dist/tex/latex/tools/theorem.sty)
-\c@egmass=\count271
+(/usr/share/texlive/texmf-dist/tex/latex/tools/theorem.sty)
+\c@egmass=\count341
 )
 \@indexfile=\write4
 \openout4 = `floss-arduino.idx'.
 
 
 Writing index file floss-arduino.idx
+(/usr/share/texlive/texmf-dist/tex/latex/l3backend/l3backend-pdfmode.def
+File: l3backend-pdfmode.def 2020-02-03 L3 backend support: PDF mode
+\l__kernel_color_stack_int=\count342
+\l__pdf_internal_box=\box53
+)
 (./floss-arduino.aux)
 \openout1 = `floss-arduino.aux'.
 
 LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 110.
 LaTeX Font Info:    ... okay on input line 110.
-LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 110.
+LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 110.
 LaTeX Font Info:    ... okay on input line 110.
 LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 110.
 LaTeX Font Info:    ... okay on input line 110.
-LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 110.
+LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 110.
+LaTeX Font Info:    ... okay on input line 110.
+LaTeX Font Info:    Checking defaults for TS1/cmr/m/n on input line 110.
 LaTeX Font Info:    ... okay on input line 110.
 LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 110.
 LaTeX Font Info:    ... okay on input line 110.
@@ -558,53 +553,48 @@ LaTeX Font Info:    ... okay on input line 110.
 LaTeX Font Info:    Checking defaults for PD1/pdf/m/n on input line 110.
 LaTeX Font Info:    ... okay on input line 110.
 
-(/usr/local/texlive/2017/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
+(/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
 [Loading MPS to PDF converter (version 2006.09.02).]
-\scratchcounter=\count272
-\scratchdimen=\dimen138
-\scratchbox=\box34
-\nofMPsegments=\count273
-\nofMParguments=\count274
+\scratchcounter=\count343
+\scratchdimen=\dimen170
+\scratchbox=\box54
+\nofMPsegments=\count344
+\nofMParguments=\count345
 \everyMPshowfont=\toks46
-\MPscratchCnt=\count275
-\MPscratchDim=\dimen139
-\MPnumerator=\count276
-\makeMPintoPDFobject=\count277
+\MPscratchCnt=\count346
+\MPscratchDim=\dimen171
+\MPnumerator=\count347
+\makeMPintoPDFobject=\count348
 \everyMPtoPDFconversion=\toks47
-) (/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
-Package: epstopdf-base 2016/05/15 v2.6 Base part for package epstopdf
-
-(/usr/local/texlive/2017/texmf-dist/tex/latex/oberdiek/grfext.sty
-Package: grfext 2016/05/16 v1.2 Manage graphics extensions (HO)
-)
+) (/usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
+Package: epstopdf-base 2020-01-24 v2.11 Base part for package epstopdf
 Package epstopdf-base Info: Redefining graphics rule for `.eps' on input line 4
-38.
-Package grfext Info: Graphics extension search list:
-(grfext)             [.png,.pdf,.jpg,.mps,.jpeg,.jbig2,.jb2,.PNG,.PDF,.JPG,.JPE
-G,.JBIG2,.JB2,.eps]
-(grfext)             \AppendGraphicsExtensions on input line 456.
+85.
 
-(/usr/local/texlive/2017/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
+(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
 File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv
 e
 ))
 
 Package layouts Warning: Layout scale set to 0.5 on input line 110.
 
-\AtBeginShipoutBox=\box35
+\AtBeginShipoutBox=\box55
 
 Package hyperref Warning: Height of page (\stockheight) is invalid (0.0pt),
 (hyperref)                using 11in.
 
 Package hyperref Info: Link coloring OFF on input line 110.
-(/usr/local/texlive/2017/texmf-dist/tex/latex/hyperref/nameref.sty
-Package: nameref 2016/05/21 v2.44 Cross-referencing by name of section
+(/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty
+Package: nameref 2019/09/16 v2.46 Cross-referencing by name of section
 
-(/usr/local/texlive/2017/texmf-dist/tex/generic/oberdiek/gettitlestring.sty
-Package: gettitlestring 2016/05/16 v1.5 Cleanup title references (HO)
+(/usr/share/texlive/texmf-dist/tex/latex/refcount/refcount.sty
+Package: refcount 2019/12/15 v3.6 Data extraction from label references (HO)
+)
+(/usr/share/texlive/texmf-dist/tex/generic/gettitlestring/gettitlestring.sty
+Package: gettitlestring 2019/12/15 v1.6 Cleanup title references (HO)
 )
-\c@section@level=\count278
-LaTeX Info: Redefining \Ref on input line 515.
+\c@section@level=\count349
+LaTeX Info: Redefining \Ref on input line 520.
 )
 LaTeX Info: Redefining \ref on input line 110.
 LaTeX Info: Redefining \pageref on input line 110.
@@ -619,6 +609,7 @@ Package caption Info: Begin \AtBeginDocument code.
 Package caption Info: subfig package v1.3 is loaded.
 Package caption Info: listings package is loaded.
 Package caption Info: End \AtBeginDocument code.
+\c@lstlisting=\count350
  (./floss-arduino.toc
 Overfull \hbox (60.41727pt too wide) detected at line 1
 \T1/cmr/bx/n/10.95 List of Figures 
@@ -663,8 +654,7 @@ Overfull \hbox (74.6947pt too wide) detected at line 9
 
 
 
-{/usr/local/texlive/2017/texmf-var/fonts/map/pdftex/updmap/pdftex.map}]
-[2] [3] [4] [5]
+{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] [2] [3] [4] [5]
 Overfull \hbox (42.2769pt too wide) detected at line 238
 \T1/cmr/bx/n/10.95 References 
  []
@@ -732,16 +722,8 @@ Underfull \vbox (badness 10000) has occurred while \output is active []
 ]
 [26] (./suppl/intro.tex
 Chapter 1.
-LaTeX Font Info:    Try loading font information for OMS+cmr on input line 36.
-(/usr/local/texlive/2017/texmf-dist/tex/latex/base/omscmr.fd
-File: omscmr.fd 2014/09/29 v2.5h Standard LaTeX font definitions
-)
-LaTeX Font Info:    Font shape `OMS/cmr/m/n' in size <10.95> not available
-(Font)              Font shape `OMS/cmsy/m/n' tried instead on input line 36.
-LaTeX Font Info:    Font shape `OMS/cmr/m/n' in size <9> not available
-(Font)              Font shape `OMS/cmsy/m/n' tried instead on input line 37.
 
-Overfull \hbox (15.71883pt too wide) in paragraph at lines 34--40
+Overfull \hbox (16.66084pt too wide) in paragraph at lines 33--39
 []\T1/cmr/m/n/10.95 Xcos is a GUI based sys-tem build-ing tool for Scilab, some
 -what sim-i-lar to Simulink$[]$[][][].
  []
@@ -750,8 +732,9 @@ Overfull \hbox (15.71883pt too wide) in paragraph at lines 34--40
 
 
 ]
-LaTeX Font Info:    Try loading font information for T1+fvm on input line 80.
- (/usr/local/texlive/2017/texmf-dist/tex/latex/bera/t1fvm.fd
+LaTeX Font Info:    Trying to load font information for T1+fvm on input line 78
+.
+ (/usr/share/texlive/texmf-dist/tex/latex/bera/t1fvm.fd
 File: t1fvm.fd 2004/09/07 scalable font definitions for T1/fvm.
 ))
 (./user-code/hw-env/hw-env.tex [2]
@@ -759,252 +742,223 @@ Chapter 2.
 [3
 
 ]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/miccontblk.png, id=1759, 419.6478pt x 413.3844pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/miccontblk.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/miccontblk.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/miccontblk.png used on input line 50.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.
+png, id=1759, 419.6478pt x 413.3844pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccon
+tblk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccont
+blk.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/miccontblk.png  used on input line 50.
 (pdftex.def)             Requested size: 258.36281pt x 254.51689pt.
- [4 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/miccontblk.png>] [5]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/resolution.png, id=1775, 207.77625pt x 330.23375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/resolution.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/resolution.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/resolution.png used on input line 127.
+ [4 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccont
+blk.png>] [5]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.
+png, id=1775, 207.77625pt x 330.23375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolu
+tion.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolut
+ion.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/resolution.png  used on input line 127.
 (pdftex.def)             Requested size: 119.2467pt x 189.52515pt.
- [6 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/resolution.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/OSHW-138px.png, id=1789, 138.5175pt x 145.54375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/OSHW-138px.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/OSHW-138px.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/OSHW-138px.png used on input line 182.
+ [6 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolut
+ion.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.
+png, id=1789, 138.5175pt x 145.54375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-1
+38px.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-13
+8px.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/OSHW-138px.png  used on input line 182.
 (pdftex.def)             Requested size: 72.26999pt x 75.93634pt.
- [7 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/OSHW-138px.png>] [8]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/arduino.png, id=1818, 585.18625pt x 221.82875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/arduino.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/arduino.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/arduino.png used on input line 254.
+ [7 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-13
+8px.png>] [8]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png
+, id=1818, 585.18625pt x 221.82875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
+o.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
+.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/arduino.png  used on input line 254.
 (pdftex.def)             Requested size: 357.73405pt x 135.61319pt.
 
-Overfull \hbox (3.4056pt too wide) in paragraph at lines 261--281
+Overfull \hbox (3.40561pt too wide) in paragraph at lines 261--281
  [] 
  []
 
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/mega.jpg, id=1821, 481.8pt x 316.7835pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/mega.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/mega.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/mega.jpg used on input line 293.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg, i
+d=1821, 481.8pt x 316.7835pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.j
+pg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jp
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/mega.jpg  used on input line 293.
 (pdftex.def)             Requested size: 258.36281pt x 169.87627pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/lily.jpg, id=1824, 321.2pt x 321.2pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/lily.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/lily.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/lily.jpg used on input line 304.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg, i
+d=1824, 321.2pt x 321.2pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.j
+pg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jp
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/lily.jpg  used on input line 304.
 (pdftex.def)             Requested size: 178.86702pt x 178.87094pt.
- [9 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/arduino.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/arduino-phone.jpg, id=1834, 230.15924pt x 153.5162pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/arduino-phone.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/arduino-phone.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/arduino-phone.jpg used on input line 323.
+[9 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.
+png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-pho
+ne.jpg, id=1834, 230.15924pt x 153.5162pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
+o-phone.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
+-phone.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/arduino-phone.jpg  used on input line 323.
 (pdftex.def)             Requested size: 178.86702pt x 119.30411pt.
- [10 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/mega.jpg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/arduino-3d-printer.jpg, id=1844, 770.88pt x 364.36125pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/arduino-3d-printer.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/arduino-3d-printer.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/arduino-3d-printer.jpg used on input line 337.
+ [10 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.j
+pg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-
+printer.jpg, id=1844, 770.88pt x 364.36125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
+o-3d-printer.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
+-3d-printer.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/arduino-3d-printer.jpg  used on input line 337.
 (pdftex.def)             Requested size: 178.86702pt x 84.54076pt.
- [11 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/lily.jpg> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-cod
-e/hw-env/figures/arduino-phone.jpg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/pcb_board_V
-1p2.png, id=1861, 608.2725pt x 534.99875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/pcb_bo
-ard_V1p2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/pcb_boa
-rd_V1p2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-tools/shield/pcb_board_V1p2.png used on input line 370.
+ [11 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.j
+pg> </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
+-phone.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png, id=
+1861, 608.2725pt x 534.99875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png
+ Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png>
+
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield
+/pcb_board_V1p2.png  used on input line 370.
 (pdftex.def)             Requested size: 258.36281pt x 227.24492pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2
-.png, id=1863, 819.06pt x 599.23875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield
--V1p2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-
-V1p2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-tools/shield/shield-V1p2.png used on input line 379.
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png, id=186
+3, 819.06pt x 599.23875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png Gr
+aphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield
+/shield-V1p2.png  used on input line 379.
 (pdftex.def)             Requested size: 397.48499pt x 290.81331pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2
-.jpg, id=1865, 494.59781pt x 376.40625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield
--V1p2.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/shield/shield-
-V1p2.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-tools/shield/shield-V1p2.jpg used on input line 388.
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg, id=186
+5, 494.59781pt x 376.40625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg Gr
+aphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield
+/shield-V1p2.jpg  used on input line 388.
 (pdftex.def)             Requested size: 238.49341pt x 181.5pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/shield-crop.jpg, id=1870, 608.2725pt x 443.6575pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/shield-crop.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/shield-crop.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/shield-crop.jpg used on input line 454.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop
+.jpg, id=1870, 608.2725pt x 443.6575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield
+-crop.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-
+crop.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/shield-crop.jpg  used on input line 454.
 (pdftex.def)             Requested size: 397.48499pt x 289.9242pt.
- [12 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/arduino-3d-printer.jpg>])
-(./user-code/sw-env/sw-env-base.tex [13 </Users/kannan/FOSS/scilab-arduino/flos
-s-arduino-clone/tools/shield/pcb_board_V1p2.png>] [14 </Users/kannan/FOSS/scila
-b-arduino/floss-arduino-clone/tools/shield/shield-V1p2.png> </Users/kannan/FOSS
-/scilab-arduino/floss-arduino-clone/tools/shield/shield-V1p2.jpg>] [15]
-[16 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/shield-crop.jpg>]
+ [12 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
+o-3d-printer.jpg>]) (./user-code/sw-env/sw-env-base.tex
+[13 </home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png>
+] [14 </home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png> 
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg>]
+[15] [16 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/sh
+ield-crop.jpg>]
 Chapter 3.
 [17
 
 ]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/hw-device-manager.jpg, id=1913, 793.96625pt x 579.16376pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/hw-device-manager.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/hw-device-manager.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/hw-device-manager.jpg used on input line 109.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-m
+anager.jpg, id=1913, 793.96625pt x 579.16376pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-dev
+ice-manager.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-devi
+ce-manager.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/hw-device-manager.jpg  used on input line 109.
 (pdftex.def)             Requested size: 397.48499pt x 289.95233pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/device-manager-com.png, id=1914, 1175.39125pt x 863.225pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/device-manager-com.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/device-manager-com.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/device-manager-com.png used on input line 116.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-mana
+ger-com.png, id=1914, 1175.39125pt x 863.225pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device
+-manager-com.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-
+manager-com.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/device-manager-com.png  used on input line 116.
 (pdftex.def)             Requested size: 397.48499pt x 291.912pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/update-driver.png, id=1915, 635.37375pt x 423.5825pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/update-driver.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/update-driver.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/update-driver.png used on input line 123.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driv
+er.png, id=1915, 635.37375pt x 423.5825pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update
+-driver.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-
+driver.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/update-driver.png  used on input line 123.
 (pdftex.def)             Requested size: 397.48499pt x 264.99695pt.
- [18] [19 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-e
-nv/figures/hw-device-manager.jpg>] [20 </Users/kannan/FOSS/scilab-arduino/floss
--arduino-clone/user-code/sw-env/figures/device-manager-com.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/launch-arduino-opt.png, id=1950, 751.80875pt x 313.17pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/launch-arduino-opt.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/launch-arduino-opt.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/launch-arduino-opt.png used on input line 218.
+ [18] [19 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/h
+w-device-manager.jpg>] [20 </home/fossee/Desktop/floss-scilab-arduino/user-code
+/sw-env/figures/device-manager-com.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-ardu
+ino-opt.png, id=1950, 751.80875pt x 313.17pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch
+-arduino-opt.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-
+arduino-opt.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/launch-arduino-opt.png  used on input line 218.
 (pdftex.def)             Requested size: 258.36281pt x 107.62325pt.
- [21 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/update-driver.png (PNG copy)>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/figures
-/arduino-ide.jpg, id=1961, 856.19875pt x 657.45625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fi
-gures/arduino-ide.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/hw-env/fig
-ures/arduino-ide.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/hw-env/figures/arduino-ide.jpg used on input line 235.
+ [21 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update
+-driver.png (PNG copy)>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide
+.jpg, id=1961, 856.19875pt x 657.45625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
+o-ide.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
+-ide.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
+-env/figures/arduino-ide.jpg  used on input line 235.
 (pdftex.def)             Requested size: 397.48499pt x 305.22243pt.
 
 Underfull \vbox (badness 1303) has occurred while \output is active []
 
- [22 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/launch-arduino-opt.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-
-clone/user-code/hw-env/figures/arduino-ide.jpg>] [23] [24]
+ [22 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch
+-arduino-opt.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/f
+igures/arduino-ide.jpg>] [23] [24]
 Package hyperref Info: bookmark level for unknown ardmass defaults to 0 on inpu
 t line 339.
 Package hyperref Info: bookmark level for unknown lstlisting defaults to 0 on i
 nput line 349.
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/floss-firmware/flo
-ss-firmware.ino)) (./user-code/sw-env/sw-env-scilab.tex [25] [26]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/linux-cd.png, id=2036, 787.94376pt x 192.72pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/linux-cd.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/linux-cd.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/linux-cd.png used on input line 75.
+(/home/fossee/Desktop/floss-scilab-arduino/tools/floss-firmware/floss-firmware.
+ino)) (./user-code/sw-env/sw-env-scilab.tex [25] [26]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.pn
+g, id=2036, 787.94376pt x 192.72pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-
+cd.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-c
+d.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/linux-cd.png  used on input line 75.
 (pdftex.def)             Requested size: 393.97092pt x 96.35976pt.
- [27 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/linux-cd.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/browse-directory.png, id=2048, 450.18187pt x 327.47343pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/browse-directory.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/browse-directory.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/browse-directory.png used on input line 120.
+ [27 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-
+cd.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-dire
+ctory.png, id=2048, 450.18187pt x 327.47343pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse
+-directory.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-
+directory.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/browse-directory.png  used on input line 120.
 (pdftex.def)             Requested size: 357.73405pt x 260.23521pt.
 
 Overfull \hbox (19.3647pt too wide) in paragraph at lines 114--124
@@ -1012,16 +966,14 @@ Overfull \hbox (19.3647pt too wide) in paragraph at lines 114--124
 10.95 Origin/tools/scilab/windows
  []
 
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/builder.png, id=2051, 600.74437pt x 421.575pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/builder.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/builder.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/builder.png used on input line 136.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png
+, id=2051, 600.74437pt x 421.575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builde
+r.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder
+.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/builder.png  used on input line 136.
 (pdftex.def)             Requested size: 397.48499pt x 278.94795pt.
 
 Overfull \hbox (1.53204pt too wide) in paragraph at lines 130--140
@@ -1029,164 +981,147 @@ Overfull \hbox (1.53204pt too wide) in paragraph at lines 130--140
  \T1/fvm/m/n/10.95 exec builder.sce
  []
 
-[28 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/browse-directory.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/loader.png, id=2062, 600.74437pt x 421.575pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/loader.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/loader.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/loader.png used on input line 152.
+[28 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-
+directory.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png,
+ id=2062, 600.74437pt x 421.575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader
+.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.
+png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/loader.png  used on input line 152.
 (pdftex.def)             Requested size: 300.37144pt x 210.78697pt.
- [29 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/builder.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/device-manager.png, id=2072, 602.25pt x 451.6875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/device-manager.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/device-manager.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/device-manager.png used on input line 180.
+ [29 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builde
+r.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-mana
+ger.png, id=2072, 602.25pt x 451.6875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device
+-manager.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-
+manager.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/device-manager.png  used on input line 180.
 (pdftex.def)             Requested size: 397.48499pt x 298.12845pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/com-properties.png, id=2076, 602.25pt x 451.6875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/com-properties.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/com-properties.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/com-properties.png used on input line 201.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-propert
+ies.png, id=2076, 602.25pt x 451.6875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-pr
+operties.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-pro
+perties.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/com-properties.png  used on input line 201.
 (pdftex.def)             Requested size: 301.12425pt x 225.84319pt.
- [30 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/loader.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/linux-port.png, id=2083, 634.37pt x 246.9225pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/linux-port.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/linux-port.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/linux-port.png used on input line 225.
+ [30 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader
+.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.
+png, id=2083, 634.37pt x 246.9225pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-
+port.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-p
+ort.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/linux-port.png  used on input line 225.
 (pdftex.def)             Requested size: 317.18422pt x 123.46094pt.
- [31 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/device-manager.png>]
+ [31 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device
+-manager.png>]
 Overfull \hbox (22.98761pt too wide) in paragraph at lines 239--247
 []\T1/cmr/m/n/10.95 Inside the \T1/fvm/m/n/10.95 Origin/tools/scilab \T1/cmr/m/
 n/10.95 di-rec-tory, lo-cate a file \T1/fvm/m/n/10.95 test_firmware.sce\T1/cmr/
 m/n/10.95 .
  []
 
-[32 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/com-properties.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone
-/user-code/sw-env/figures/linux-port.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmwa
-re.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/test-console.png, id=2101, 600.74437pt x 421.575pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/test-console.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/test-console.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/test-console.png used on input line 276.
+[32 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-pro
+perties.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figure
+s/linux-port.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-consol
+e.png, id=2101, 600.74437pt x 421.575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-c
+onsole.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-co
+nsole.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/test-console.png  used on input line 276.
 (pdftex.def)             Requested size: 300.37144pt x 210.78697pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/table_functions_crop.pdf, id=2104, 1055.945pt x 543.02875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/table_functions_crop.pdf Graphic file (type pdf)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/table_functions_crop.pdf>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/table_functions_crop.pdf used on input line 301.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_funct
+ions_crop.pdf, id=2104, 1055.945pt x 543.02875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_
+functions_crop.pdf Graphic file (type pdf)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_f
+unctions_crop.pdf>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/table_functions_crop.pdf  used on input line 301.
 (pdftex.def)             Requested size: 397.48499pt x 204.40587pt.
 Package hyperref Info: bookmark level for unknown codemass defaults to 0 on inp
 ut line 314.
- [33]
+
+[33]
 Underfull \vbox (badness 1308) has occurred while \output is active []
 
- [34 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/test-console.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/table_functions_crop.pdf>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/scilab/test_firmwa
-re.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/sine-blk.png, id=2131, 376.40625pt x 376.40625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/sine-blk.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/sine-blk.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/sine-blk.png used on input line 351.
+ [34 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-c
+onsole.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures
+/table_functions_crop.pdf>]
+(/home/fossee/Desktop/floss-scilab-arduino/tools/scilab/test_firmware.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.pn
+g, id=2131, 376.40625pt x 376.40625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-b
+lk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-bl
+k.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/sine-blk.png  used on input line 351.
 (pdftex.def)             Requested size: 357.73405pt x 357.76195pt.
- [35] [36 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-e
-nv/figures/sine-blk.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/plot-blk.png, id=2153, 310.15875pt x 109.1578pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/plot-blk.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/plot-blk.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/plot-blk.png used on input line 403.
-(pdftex.def)             Requested size: 357.73405pt x 125.90192pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/clock-blk.png, id=2155, 307.90031pt x 108.405pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/clock-blk.png Graphic file (type png)
 
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/clock-blk.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/clock-blk.png used on input line 417.
+[35] [36 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/si
+ne-blk.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.pn
+g, id=2153, 310.15875pt x 109.1578pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-b
+lk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-bl
+k.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/plot-blk.png  used on input line 403.
+(pdftex.def)             Requested size: 357.73405pt x 125.90192pt.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.p
+ng, id=2155, 307.90031pt x 108.405pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-
+blk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-b
+lk.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/clock-blk.png  used on input line 417.
 (pdftex.def)             Requested size: 357.73405pt x 125.95995pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/sine-gen.png, id=2157, 207.77625pt x 253.69781pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/sine-gen.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/sine-gen.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/sine-gen.png used on input line 438.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.pn
+g, id=2157, 207.77625pt x 253.69781pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-g
+en.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-ge
+n.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/sine-gen.png  used on input line 438.
 (pdftex.def)             Requested size: 178.86702pt x 218.40813pt.
- [37 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/plot-blk.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user
--code/sw-env/figures/clock-blk.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/sine-output.png, id=2163, 383.18156pt x 184.43906pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/sine-output.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/sine-output.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/sine-output.png used on input line 449.
+ [37 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-b
+lk.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clo
+ck-blk.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output
+.png, id=2163, 383.18156pt x 184.43906pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-o
+utput.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-ou
+tput.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/sine-output.png  used on input line 449.
 (pdftex.def)             Requested size: 258.36281pt x 124.36716pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/cscope-config.png, id=2165, 310.15875pt x 289.08pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/cscope-config.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/cscope-config.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/cscope-config.png used on input line 463.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-conf
+ig.png, id=2165, 310.15875pt x 289.08pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope
+-config.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-
+config.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/cscope-config.png  used on input line 463.
 (pdftex.def)             Requested size: 258.36281pt x 240.8053pt.
 
 Overfull \hbox (0.16797pt too wide) in paragraph at lines 468--477
@@ -1194,89 +1129,79 @@ Overfull \hbox (0.16797pt too wide) in paragraph at lines 468--477
  pa-ram-e-ter is \T1/fvm/m/n/10.95 Final integration
  []
 
-[38 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/sine-gen.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-
-code/sw-env/figures/sine-output.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/sim-setup.png, id=2171, 333.49594pt x 225.84375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/sim-setup.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/sim-setup.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/sim-setup.png used on input line 480.
+[38 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-ge
+n.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine
+-output.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.p
+ng, id=2171, 333.49594pt x 225.84375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-se
+tup.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-set
+up.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/sim-setup.png  used on input line 480.
 (pdftex.def)             Requested size: 258.36281pt x 174.97539pt.
 
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [39 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/cscope-config.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/arduino-palette.png, id=2179, 292.84406pt x 107.65219pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/arduino-palette.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/arduino-palette.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/arduino-palette.png used on input line 511.
+ [39 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope
+-config.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-pal
+ette.png, id=2179, 292.84406pt x 107.65219pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduin
+o-palette.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino
+-palette.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/arduino-palette.png  used on input line 511.
 (pdftex.def)             Requested size: 258.36281pt x 94.98553pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/xcos-help.png, id=2180, 617.30624pt x 466.74374pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/xcos-help.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/xcos-help.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/xcos-help.png used on input line 518.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.p
+ng, id=2180, 617.30624pt x 466.74374pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-h
+elp.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-he
+lp.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/xcos-help.png  used on input line 518.
 (pdftex.def)             Requested size: 258.36281pt x 195.35445pt.
 ) (./user-code/sw-env/sw-env-python.tex
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [40 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/sim-setup.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/use
-r-code/sw-env/figures/arduino-palette.png>] [41 </Users/kannan/FOSS/scilab-ardu
-ino/floss-arduino-clone/user-code/sw-env/figures/xcos-help.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/python-windows-install.JPG, id=2194, 514.17094pt x 316.93407pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/python-windows-install.JPG Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/python-windows-install.JPG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/python-windows-install.JPG used on input line 36.
+ [40 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-se
+tup.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/ar
+duino-palette.png>] [41 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/xcos-help.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python-wind
+ows-install.JPG, id=2194, 514.17094pt x 316.93407pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python
+-windows-install.JPG Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python-
+windows-install.JPG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/python-windows-install.JPG  used on input line 36.
 (pdftex.def)             Requested size: 258.36281pt x 159.25491pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/windows-cmd.png, id=2197, 572.1375pt x 338.26375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/windows-cmd.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/windows-cmd.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/windows-cmd.png used on input line 55.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows-cmd
+.png, id=2197, 572.1375pt x 338.26375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/window
+s-cmd.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows
+-cmd.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/windows-cmd.png  used on input line 55.
 (pdftex.def)             Requested size: 258.36281pt x 152.75406pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/win-command-prompt.png, id=2198, 1353.055pt x 289.08pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/win-command-prompt.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/win-command-prompt.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/win-command-prompt.png used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-command
+-prompt.png, id=2198, 1353.055pt x 289.08pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-co
+mmand-prompt.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-com
+mand-prompt.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/win-command-prompt.png  used on input line 65.
 (pdftex.def)             Requested size: 258.36281pt x 55.19925pt.
- [42 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/python-windows-install.JPG>] [43 </Users/kannan/FOSS/scilab-arduino/floss
--arduino-clone/user-code/sw-env/figures/windows-cmd.png> </Users/kannan/FOSS/sc
-ilab-arduino/floss-arduino-clone/user-code/sw-env/figures/win-command-prompt.pn
-g>]
+ [42 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/python
+-windows-install.JPG>] [43 </home/fossee/Desktop/floss-scilab-arduino/user-code
+/sw-env/figures/windows-cmd.png> </home/fossee/Desktop/floss-scilab-arduino/use
+r-code/sw-env/figures/win-command-prompt.png>]
 Overfull \hbox (6.38388pt too wide) in paragraph at lines 96--100
 \T1/cmr/m/n/10.95 the Com-mand Prompt, ex-e-cute the fol-low-ing com-mand: \T1/
 fvm/m/n/10.95 pip show pyserial
@@ -1286,124 +1211,114 @@ fvm/m/n/10.95 pip show pyserial
 Package hyperref Info: bookmark level for unknown pymass defaults to 0 on input
  line 207.
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/python/test_firmwa
-re.py)) (./user-code/sw-env/sw-env-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/tools/python/test_firmware.py))
+(./user-code/sw-env/sw-env-julia.tex
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
  [46]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/julia-download.png, id=2296, 670.00313pt x 277.035pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-download.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-download.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/julia-download.png used on input line 37.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-downl
+oad.png, id=2296, 670.00313pt x 277.035pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+download.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-d
+ownload.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/julia-download.png  used on input line 37.
 (pdftex.def)             Requested size: 397.48499pt x 164.34962pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/julia-windows-install.png, id=2297, 756.8275pt x 632.3625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-windows-install.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-windows-install.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/julia-windows-install.png used on input line 44.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-windo
+ws-install.png, id=2297, 756.8275pt x 632.3625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+windows-install.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-w
+indows-install.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/julia-windows-install.png  used on input line 44.
 (pdftex.def)             Requested size: 258.36281pt x 215.86882pt.
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/windows-cmd.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/windows-cmd.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/windows-cmd.png used on input line 51.
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/window
+s-cmd.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/windows
+-cmd.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/windows-cmd.png  used on input line 51.
 (pdftex.def)             Requested size: 258.36281pt x 152.75406pt.
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/win-command-prompt.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/win-command-prompt.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/win-command-prompt.png used on input line 58.
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-co
+mmand-prompt.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/win-com
+mand-prompt.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/win-command-prompt.png  used on input line 58.
 (pdftex.def)             Requested size: 258.36281pt x 55.19925pt.
- [47] [48 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-e
-nv/figures/julia-download.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino
--clone/user-code/sw-env/figures/julia-windows-install.png>] [49]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/julia-repl-windows.png, id=2329, 1354.05875pt x 768.8725pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-repl-windows.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-repl-windows.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/julia-repl-windows.png used on input line 105.
-(pdftex.def)             Requested size: 397.48499pt x 225.70088pt.
 
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/julia-pkg-windows.png, id=2331, 1353.055pt x 768.8725pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-pkg-windows.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-pkg-windows.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/julia-pkg-windows.png used on input line 114.
+[47] [48 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/ju
+lia-download.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/f
+igures/julia-windows-install.png>] [49]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-repl-
+windows.png, id=2329, 1354.05875pt x 768.8725pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+repl-windows.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-r
+epl-windows.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/julia-repl-windows.png  used on input line 105.
+(pdftex.def)             Requested size: 397.48499pt x 225.70088pt.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg-w
+indows.png, id=2331, 1353.055pt x 768.8725pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+pkg-windows.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-p
+kg-windows.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/julia-pkg-windows.png  used on input line 114.
 (pdftex.def)             Requested size: 397.48499pt x 225.86513pt.
- [50 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-repl-windows.png>]
+ [50 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+repl-windows.png>]
 Overfull \hbox (5.34262pt too wide) in paragraph at lines 138--140
 []\T1/cmr/m/n/10.95 First, up-date your sys-tem. Open the Ter-mi-nal. Type \T1/
 fvm/m/n/10.95 sudo apt-get update
  []
 
-[51 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-pkg-windows.png>]
+[51 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-p
+kg-windows.png>]
 Overfull \hbox (12.2196pt too wide) in paragraph at lines 155--159
 \T1/fvm/m/n/10.95 sudo ln -s /opt/julia-1.6.0/bin/julia /usr/local/bin/julia 
  []
 
 [52]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/julia-terminal-repl.png, id=2362, 949.5475pt x 655.44875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-terminal-repl.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-terminal-repl.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/julia-terminal-repl.png used on input line 186.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-termi
+nal-repl.png, id=2362, 949.5475pt x 655.44875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+terminal-repl.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-t
+erminal-repl.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/julia-terminal-repl.png  used on input line 186.
 (pdftex.def)             Requested size: 397.48499pt x 274.37646pt.
- [53 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-terminal-repl.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/julia-pkg.png, id=2374, 949.5475pt x 655.44875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-pkg.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/julia-pkg.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/julia-pkg.png used on input line 216.
+ [53 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+terminal-repl.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-pkg.p
+ng, id=2374, 949.5475pt x 655.44875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+pkg.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-p
+kg.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/julia-pkg.png  used on input line 216.
 (pdftex.def)             Requested size: 397.48499pt x 274.37646pt.
- [54 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/julia-pkg.png>]
+ [54 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
+pkg.png>]
 Package hyperref Info: bookmark level for unknown juliamass defaults to 0 on in
 put line 265.
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/julia/test_firmwar
-e.jl [55])) (./user-code/sw-env/sw-env-OM.tex [56]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/openmodelica-run-anyway.png, id=2418, 812.03375pt x 749.80125pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/openmodelica-run-anyway.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/openmodelica-run-anyway.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/openmodelica-run-anyway.png used on input line 41.
+(/home/fossee/Desktop/floss-scilab-arduino/tools/julia/test_firmware.jl
+[55])) (./user-code/sw-env/sw-env-OM.tex [56]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmodelic
+a-run-anyway.png, id=2418, 812.03375pt x 749.80125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmo
+delica-run-anyway.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmod
+elica-run-anyway.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/openmodelica-run-anyway.png  used on input line 41.
 (pdftex.def)             Requested size: 258.36281pt x 238.55693pt.
 
 Overfull \hbox (13.35912pt too wide) in paragraph at lines 46--52
@@ -1411,101 +1326,87 @@ Overfull \hbox (13.35912pt too wide) in paragraph at lines 46--52
 on-nec-tion Ed-i-tor (OMEdit)
  []
 
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/OMEdit-libraries.png, id=2422, 664.4825pt x 546.04pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/OMEdit-libraries.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/OMEdit-libraries.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/OMEdit-libraries.png used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libr
+aries.png, id=2422, 664.4825pt x 546.04pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
+-libraries.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-
+libraries.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/OMEdit-libraries.png  used on input line 65.
 (pdftex.def)             Requested size: 365.46649pt x 300.32292pt.
 
 Underfull \vbox (badness 3942) has occurred while \output is active []
 
- [57 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/openmodelica-run-anyway.png>]
+ [57 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/openmo
+delica-run-anyway.png>]
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [58 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/OMEdit-libraries.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/OMEdit-UI.png, id=2442, 996.1215pt x 597.9138pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/OMEdit-UI.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/OMEdit-UI.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/OMEdit-UI.png used on input line 97.
+ [58 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
+-libraries.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.p
+ng, id=2442, 996.1215pt x 597.9138pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
+-UI.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-
+UI.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/OMEdit-UI.png  used on input line 97.
 (pdftex.def)             Requested size: 397.48499pt x 238.5865pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-open-model.png, id=2444, 1087.06125pt x 792.9625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-open-model.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-open-model.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-open-model.png used on input line 111.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-mod
+el.png, id=2444, 1087.06125pt x 792.9625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-ope
+n-model.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open
+-model.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-open-model.png  used on input line 111.
 (pdftex.def)             Requested size: 397.48499pt x 289.94313pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-Modeling.png, id=2445, 1368.11125pt x 791.95876pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-Modeling.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-Modeling.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-Modeling.png used on input line 118.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Modeling
+.png, id=2445, 1368.11125pt x 791.95876pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Mod
+eling.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Mode
+ling.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-Modeling.png  used on input line 118.
 (pdftex.def)             Requested size: 397.48499pt x 230.08511pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-modeling-views.png, id=2446, 673.01437pt x 373.395pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-modeling-views.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-modeling-views.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-modeling-views.png used on input line 126.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling
+-views.png, id=2446, 673.01437pt x 373.395pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-mod
+eling-views.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-mode
+ling-views.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-modeling-views.png  used on input line 126.
 (pdftex.def)             Requested size: 397.48499pt x 220.52904pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-text-view.png, id=2447, 1370.11874pt x 796.9775pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-text-view.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-text-view.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-text-view.png used on input line 134.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-vie
+w.png, id=2447, 1370.11874pt x 796.9775pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-tex
+t-view.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text
+-view.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-text-view.png  used on input line 134.
 (pdftex.def)             Requested size: 397.48499pt x 231.20267pt.
  [59]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-simulate.png, id=2464, 673.01437pt x 373.395pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-simulate.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-simulate.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-simulate.png used on input line 163.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-simulate
+.png, id=2464, 673.01437pt x 373.395pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim
+ulate.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-simu
+late.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-simulate.png  used on input line 163.
 (pdftex.def)             Requested size: 397.48499pt x 220.52904pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-sim-success.png, id=2465, 647.41875pt x 516.93124pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-sim-success.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-sim-success.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-sim-success.png used on input line 170.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-succ
+ess.png, id=2465, 647.41875pt x 516.93124pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim
+-success.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-
+success.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-sim-success.png  used on input line 170.
 (pdftex.def)             Requested size: 397.48499pt x 317.37051pt.
 
 Overfull \hbox (0.4131pt too wide) in paragraph at lines 181--188
@@ -1516,21 +1417,22 @@ rigin/tools/openmodelica/linux \T1/cmr/m/n/10.95 di-rec-tory,
 
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [60 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/OMEdit-UI.png>] [61 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clon
-e/user-code/sw-env/figures/om-open-model.png>]
+ [60 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
+-UI.png>]
+[61 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open
+-model.png>]
 
 LaTeX Warning: Text page 62 contains only floats.
 
-[62 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-Modeling.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/us
-er-code/sw-env/figures/om-modeling-views.png>]
+[62 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-mode
+ling.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/o
+m-modeling-views.png>]
 
 LaTeX Warning: Text page 63 contains only floats.
 
-[63 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-text-view.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/u
-ser-code/sw-env/figures/om-simulate.png>]
+[63 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text
+-view.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/
+om-simulate.png>]
 Overfull \hbox (4.19868pt too wide) in paragraph at lines 199--201
 []\T1/cmr/m/n/10.95 Navigate to \T1/fvm/m/n/10.95 Origin/tools/openmodelica/win
 dows \T1/cmr/m/n/10.95 or \T1/fvm/m/n/10.95 Origin/tools/ 
@@ -1542,345 +1444,310 @@ Overfull \hbox (5.89722pt too wide) in paragraph at lines 201--209
 est_firmware.mo.
  []
 
-[64 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-sim-success.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures
-/om-toolbox-loaded.png, id=2505, 325.215pt x 735.74875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fi
-gures/om-toolbox-loaded.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/sw-env/fig
-ures/om-toolbox-loaded.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/sw-env/figures/om-toolbox-loaded.png used on input line 226.
+[64 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-
+success.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-toolbox-
+loaded.png, id=2505, 325.215pt x 735.74875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-too
+lbox-loaded.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-tool
+box-loaded.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
+-env/figures/om-toolbox-loaded.png  used on input line 226.
 (pdftex.def)             Requested size: 178.86702pt x 404.66306pt.
 Package hyperref Info: bookmark level for unknown OpenModelicamass defaults to 
 0 on input line 244.
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/tools/openmodelica/windo
-ws//test_firmware.mo [65])) (./user-code/led/led-base.tex [66 </Users/kannan/FO
-SS/scilab-arduino/floss-arduino-clone/user-code/sw-env/figures/om-toolbox-loade
-d.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/tools/openmodelica/windows//test_fir
+mware.mo [65])) (./user-code/led/led-base.tex [66 </home/fossee/Desktop/floss-s
+cilab-arduino/user-code/sw-env/figures/om-toolbox-loaded.png>]
 Chapter 4.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/le
-d.png, id=2548, 149.8097pt x 84.315pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/led.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/led.png used on input line 52.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png, id=25
+48, 149.8097pt x 84.315pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png G
+raphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led.png  used on input line 52.
 (pdftex.def)             Requested size: 79.49577pt x 44.74203pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/sc
-hematic.png, id=2550, 415.5525pt x 456.70625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/schematic.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/schematic.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/schematic.png used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png,
+ id=2550, 415.5525pt x 456.70625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic
+.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.
+png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/schematic.png  used on input line 65.
 (pdftex.def)             Requested size: 178.86702pt x 196.58194pt.
- [67
-
- </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/l
-ed.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/ar
-duino-new-shield.jpeg, id=2556, 305.7021pt x 172.0026pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/arduino-new-shield.jpeg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/arduino-new-shield.jpeg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/arduino-new-shield.jpeg used on input line 79.
+[67
+
+ </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-new-sh
+ield.jpeg, id=2556, 305.7021pt x 172.0026pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-n
+ew-shield.jpeg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-ne
+w-shield.jpeg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/arduino-new-shield.jpeg  used on input line 79.
 (pdftex.def)             Requested size: 258.36281pt x 145.37354pt.
- [68 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/schematic.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-c
-ode/led/figures/arduino-new-shield.jpeg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/rg
-b-led-bb.png, id=2564, 451.286pt x 236.082pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/rgb-led-bb.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/rgb-led-bb.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/rgb-led-bb.png used on input line 107.
+
+[68 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.
+png> </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-n
+ew-shield.jpeg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
+, id=2564, 451.286pt x 236.082pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-b
+b.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb
+.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/rgb-led-bb.png  used on input line 107.
 (pdftex.def)             Requested size: 357.73405pt x 187.14034pt.
- [69 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/rgb-led-bb.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue/led-blue.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue/led-blue.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue-delay/led-blue-delay.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue-delay/led-blue-delay.ino) [70]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/le
-d_output.png, id=2593, 3035.34pt x 1947.275pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/led_output.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led_output.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/led_output.png used on input line 197.
+ [69 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-b
+b.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-b
+lue.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-b
+lue.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay
+/led-blue-delay.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay
+/led-blue-delay.ino) [70]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png
+, id=2593, 3035.34pt x 1947.275pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_outpu
+t.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output
+.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led_output.png  used on input line 197.
 (pdftex.def)             Requested size: 357.73405pt x 229.47339pt.
-LaTeX Font Info:    Try loading font information for T1+cmss on input line 209.
+LaTeX Font Info:    Trying to load font information for T1+cmss on input line 2
+09.
 
- (/usr/local/texlive/2017/texmf-dist/tex/latex/base/t1cmss.fd
-File: t1cmss.fd 2014/09/29 v2.5h Standard LaTeX font definitions
+(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmss.fd
+File: t1cmss.fd 2019/12/16 v2.5j Standard LaTeX font definitions
 )
 Package hyperref Info: bookmark level for unknown egmass defaults to 0 on input
  line 210.
-[71]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue/led-blue.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue-delay/led-blue-delay.ino [72 </Users/kannan/FOSS/scilab-arduino/floss-ar
-duino-clone/user-code/led/figures/led_output.png>])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-blue-red/led-blue-red.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/arduino/le
-d-green-blink/led-green-blink.ino)) (./user-code/led/led-scilab.tex [73]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue.sce) [74]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue-delay.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue-delay.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue-delay.sce [75])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--blue-red.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/scilab/led
--green-blink.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/le
-d-blue-com-2.png, id=2731, 766.865pt x 696.6025pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/led-blue-com-2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-blue-com-2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/led-blue-com-2.png used on input line 136.
+ [71]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-b
+lue.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay
+/led-blue-delay.ino [72 </home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led_output.png>])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-red/l
+ed-blue-red.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-green-blin
+k/led-green-blink.ino)) (./user-code/led/led-scilab.tex [73]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
+[74]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.
+sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.
+sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.
+sce [75])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-red.sc
+e)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-green-blink
+.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-com-2
+.png, id=2731, 766.865pt x 696.6025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-
+com-2.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-c
+om-2.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led-blue-com-2.png  used on input line 136.
 (pdftex.def)             Requested size: 178.86702pt x 162.47923pt.
  [76]
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 152--161
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 152--161
  [][] 
  []
 
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/le
-d-blue-delay-com-2.png, id=2768, 848.16875pt x 694.595pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/led-blue-delay-com-2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-blue-delay-com-2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/led-blue-delay-com-2.png used on input line 171.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay
+-com-2.png, id=2768, 848.16875pt x 694.595pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-
+delay-com-2.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-d
+elay-com-2.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led-blue-delay-com-2.png  used on input line 171.
 (pdftex.def)             Requested size: 178.86702pt x 146.47337pt.
 
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 186--198
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 186--198
  [][] 
  []
 
-[77 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-blue-com-2.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/le
-d-blue-red-com-2.png, id=2783, 829.0975pt x 805.0075pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/led-blue-red-com-2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-blue-red-com-2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/led-blue-red-com-2.png used on input line 209.
+[77 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-c
+om-2.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red-c
+om-2.png, id=2783, 829.0975pt x 805.0075pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-
+red-com-2.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-r
+ed-com-2.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led-blue-red-com-2.png  used on input line 209.
 (pdftex.def)             Requested size: 178.86702pt x 173.66284pt.
 
-Overfull \hbox (13.8529pt too wide) in paragraph at lines 225--242
+Overfull \hbox (13.85292pt too wide) in paragraph at lines 225--242
  [][] 
  []
 
-[78 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-blue-delay-com-2.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/le
-d-green-blink-com-2.png, id=2796, 869.2475pt x 678.535pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figur
-es/led-green-blink-com-2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-green-blink-com-2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/led/figures/led-green-blink-com-2.png used on input line 252.
+[78 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-d
+elay-com-2.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blin
+k-com-2.png, id=2796, 869.2475pt x 678.535pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green
+-blink-com-2.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-
+blink-com-2.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
+d/figures/led-green-blink-com-2.png  used on input line 252.
 (pdftex.def)             Requested size: 178.86702pt x 139.61826pt.
 
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 267--280
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 267--280
  [][] 
  []
 
-[79 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figure
-s/led-blue-red-com-2.png>]) (./user-code/led/led-python.tex [80 </Users/kannan/
-FOSS/scilab-arduino/floss-arduino-clone/user-code/led/figures/led-green-blink-c
-om-2.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py) [81]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue-delay.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue-delay.py) [82]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue-delay.py [83])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--blue-red.py [84])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/python/led
--green-blink.py [85])) (./user-code/led/led-julia.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue.jl) [86]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue-delay.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue-delay.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue.jl) [87]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue-delay.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-blue-red.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/julia/led-
-green-blink.jl)) (./user-code/led/led-OM.tex [88]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue.mo) [89]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue-delay.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue-delay.mo) [90]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue-delay.mo [91])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-blue-red.mo [92])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/led/OpenModeli
-ca/led-green-blink.mo)) (./user-code/push/push-base.tex [93] [94
+[79 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-r
+ed-com-2.png>]) (./user-code/led/led-python.tex [80 </home/fossee/Desktop/floss
+-scilab-arduino/user-code/led/figures/led-green-blink-com-2.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+[81]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.
+py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.
+py) [82]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.
+py [83])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-red.py
+[84])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-green-blink
+.py [85])) (./user-code/led/led-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl)
+[86] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
+) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.j
+l)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.j
+l) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl)
+[87]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.j
+l)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-red.jl)
+
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-green-blink.
+jl)) (./user-code/led/led-OM.tex [88]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.
+mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.
+mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.
+mo) [89]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.
+mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-
+delay.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-
+delay.mo) [90]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.
+mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-
+delay.mo [91])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-
+red.mo [92])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-green
+-blink.mo)) (./user-code/push/push-base.tex [93] [94
 
 ]
 Chapter 5.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/p
-ushbutton-conn.png, id=3304, 415.5525pt x 438.63875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/pushbutton-conn.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figur
-es/pushbutton-conn.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/push/figures/pushbutton-conn.png used on input line 63.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-co
+nn.png, id=3305, 415.5525pt x 438.63875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutt
+on-conn.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutto
+n-conn.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
+sh/figures/pushbutton-conn.png  used on input line 63.
 (pdftex.def)             Requested size: 178.86702pt x 188.80507pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/s
-witch.png, id=3305, 453.695pt x 239.294pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/switch.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figur
-es/switch.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/push/figures/switch.png used on input line 72.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch.png, i
+d=3306, 453.695pt x 239.294pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch.p
+ng Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch.pn
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
+sh/figures/switch.png  used on input line 72.
 (pdftex.def)             Requested size: 397.48499pt x 209.64827pt.
- [95]
+[95]
 Underfull \vbox (badness 3098) has occurred while \output is active []
 
- [96 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/pushbutton-conn.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone
-/user-code/push/figures/switch.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/s
-witch-led.png, id=3319, 453.695pt x 266.596pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/switch-led.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figur
-es/switch-led.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/push/figures/switch-led.png used on input line 106.
+ [96 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutt
+on-conn.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/
+switch.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-led.pn
+g, id=3320, 453.695pt x 266.596pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-l
+ed.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-le
+d.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
+sh/figures/switch-led.png  used on input line 106.
 (pdftex.def)             Requested size: 397.48499pt x 233.56786pt.
 
 Underfull \vbox (badness 1158) has occurred while \output is active []
 
- [97 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/switch-led.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/p
-ush-button-status/push-button-status.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/p
-ush-button-status/push-button-status.ino) [98]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/l
-ed-push-button/led-push-button.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/p
-ush-button-status/push-button-status.ino)
+ [97 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/switch-l
+ed.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-s
+tatus/push-button-status.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-s
+tatus/push-button-status.ino) [98]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-butt
+on/led-push-button.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-s
+tatus/push-button-status.ino)
 Overfull \hbox (0.16989pt too wide) in paragraph at lines 181--184
 []\T1/cmr/m/n/10.95 Turning the LED on or off de-pend-ing on the push-but-ton. 
 Avail-
  []
 
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/arduino/l
-ed-push-button/led-push-button.ino [99])) (./user-code/push/push-scilab.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/pu
-sh-button-status.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/pu
-sh-button-status.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/s
-ci-ard-meter.png, id=3383, 428.60126pt x 442.65375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/sci-ard-meter.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figur
-es/sci-ard-meter.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/push/figures/sci-ard-meter.png used on input line 31.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-butt
+on/led-push-button.ino [99])) (./user-code/push/push-scilab.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-st
+atus.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-st
+atus.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/sci-ard-meter
+.png, id=3384, 428.60126pt x 442.65375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/sci-ard-
+meter.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/sci-ard-m
+eter.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
+sh/figures/sci-ard-meter.png  used on input line 31.
 (pdftex.def)             Requested size: 178.86702pt x 184.73128pt.
  [100]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/le
-d-push-button.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/pu
-sh-button-status.sce [101 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clon
-e/user-code/push/figures/sci-ard-meter.png>])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-butto
+n.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-st
+atus.sce [101 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures
+/sci-ard-meter.png>])
 Overfull \hbox (0.145pt too wide) in paragraph at lines 64--67
 \T1/cmr/m/n/10.95 able at \T1/fvm/m/n/10.95 O r i g i n / u s e r - c o d e / p
  u s h / s c i l a b / l e d - p u s h - b u t t o n . s c e\T1/cmr/m/n/10.95 ,
@@ -1888,110 +1755,100 @@ Overfull \hbox (0.145pt too wide) in paragraph at lines 64--67
  []
 
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/scilab/le
-d-push-button.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/p
-ush-button-status.PNG, id=3426, 264.99pt x 268.00125pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/push-button-status.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figur
-es/push-button-status.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/push/figures/push-button-status.PNG used on input line 95.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-butto
+n.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-s
+tatus.PNG, id=3428, 264.99pt x 268.00125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-but
+ton-status.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-butt
+on-status.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
+sh/figures/push-button-status.PNG  used on input line 95.
 (pdftex.def)             Requested size: 178.86702pt x 180.9012pt.
 
-Overfull \hbox (6.96799pt too wide) in paragraph at lines 113--123
+Overfull \hbox (6.968pt too wide) in paragraph at lines 113--123
  [][] 
  []
 
 [102]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figures/l
-ed-push-button.PNG, id=3455, 298.86656pt x 264.99pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/led-push-button.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figur
-es/led-push-button.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/push/figures/led-push-button.PNG used on input line 138.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-butt
+on.PNG, id=3456, 298.86656pt x 264.99pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push
+-button.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-
+button.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
+sh/figures/led-push-button.PNG  used on input line 138.
 (pdftex.def)             Requested size: 178.86702pt x 158.59492pt.
 
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 155--166
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 155--166
  [][] 
  []
 
-[103 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/figu
-res/push-button-status.PNG>] [104 </Users/kannan/FOSS/scilab-arduino/floss-ardu
-ino-clone/user-code/push/figures/led-push-button.PNG>])
-(./user-code/push/push-python.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/pu
-sh-button-status.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/pu
-sh-button-status.py) [105]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/le
-d-push-button.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/pu
-sh-button-status.py [106])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/python/le
-d-push-button.py [107])) (./user-code/push/push-julia.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/pus
-h-button-status.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/pus
-h-button-status.jl) [108]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led
--push-button.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/pus
-h-button-status.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/julia/led
--push-button.jl [109])) (./user-code/push/push-OM.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModel
-ica/push-button-status.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModel
-ica/push-button-status.mo) [110]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModel
-ica/led-push-button.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModel
-ica/push-button-status.mo [111])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/push/OpenModel
-ica/led-push-button.mo [112])) (./user-code/ldr/ldr-base.tex [113] [114
+[103 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-but
+ton-status.PNG>] [104 </home/fossee/Desktop/floss-scilab-arduino/user-code/push
+/figures/led-push-button.PNG>]) (./user-code/push/push-python.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-st
+atus.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-st
+atus.py) [105]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-butto
+n.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-st
+atus.py [106])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-butto
+n.py [107])) (./user-code/push/push-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-sta
+tus.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-sta
+tus.jl) [108]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button
+.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-sta
+tus.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button
+.jl [109])) (./user-code/push/push-OM.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-but
+ton-status.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-but
+ton-status.mo) [110]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push
+-button.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-but
+ton-status.mo [111])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push
+-button.mo [112])) (./user-code/ldr/ldr-base.tex [113] [114
 
 ]
 Chapter 6.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r.jpg, id=3779, 106.89937pt x 94.85437pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr.jpg used on input line 62.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg, id=37
+80, 106.89937pt x 94.85437pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg G
+raphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr.jpg  used on input line 62.
 (pdftex.def)             Requested size: 178.86702pt x 158.72462pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r_sym.png, id=3780, 1009.52156pt x 741.52031pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr_sym.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr_sym.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr_sym.png used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png, i
+d=3781, 1009.52156pt x 741.52031pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.p
+ng Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.pn
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr_sym.png  used on input line 65.
 (pdftex.def)             Requested size: 178.86702pt x 131.37468pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r-conn.png, id=3781, 415.5525pt x 450.68375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr-conn.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr-conn.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr-conn.png used on input line 71.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png, 
+id=3782, 415.5525pt x 450.68375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.
+png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.p
+ng>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr-conn.png  used on input line 71.
 (pdftex.def)             Requested size: 178.86702pt x 193.98965pt.
- [115]
+[115]
 Overfull \hbox (0.60098pt too wide) in paragraph at lines 87--87
 []\T1/cmr/bx/n/14.4 Connecting an LDR with Ar-duino Uno us-ing a bread-
  []
@@ -1999,102 +1856,90 @@ Overfull \hbox (0.60098pt too wide) in paragraph at lines 87--87
 
 Underfull \vbox (badness 3333) has occurred while \output is active []
 
- [116 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figu
-res/ldr.jpg> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/l
-dr/figures/ldr_sym.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr-conn.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LD
-R.png, id=3794, 455.301pt x 208.78pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/LDR.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/LDR.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/LDR.png used on input line 102.
+ [116 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg>
+ </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png> 
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png, id=37
+95, 455.301pt x 208.78pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png G
+raphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/LDR.png  used on input line 102.
 (pdftex.def)             Requested size: 397.48499pt x 182.27425pt.
- [117 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figu
-res/LDR.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/LD
-R-led.png, id=3807, 455.301pt x 257.763pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/LDR-led.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/LDR-led.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/LDR-led.png used on input line 125.
+ [117 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR.png>
+]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR-led.png, i
+d=3808, 455.301pt x 257.763pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR-led.p
+ng Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/LDR-led.pn
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/LDR-led.png  used on input line 125.
 (pdftex.def)             Requested size: 397.48499pt x 225.03864pt.
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ld
-r-read/ldr-read.ino) [118 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clon
-e/user-code/ldr/figures/LDR-led.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ld
-r-read/ldr-read.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ld
-r-read/ldr-read.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ld
-r-read/ldr-read.ino [119])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/arduino/ld
-r-led/ldr-led.ino)) (./user-code/ldr/ldr-scilab.tex [120]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr
--read.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr
--read.sce) [121]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr
--read.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/scilab/ldr
--led.sce) [122]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r-read-xcos.PNG, id=3931, 257.46187pt x 304.13625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr-read-xcos.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr-read-xcos.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr-read-xcos.PNG used on input line 131.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
+ead.ino) [118 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/
+LDR-led.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
+ead.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
+ead.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
+ead.ino [119])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-led/ldr-le
+d.ino)) (./user-code/ldr/ldr-scilab.tex [120]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce)
+[121]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-led.sce)
+[122]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.
+PNG, id=3932, 257.46187pt x 304.13625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-
+xcos.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-x
+cos.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr-read-xcos.PNG  used on input line 131.
 (pdftex.def)             Requested size: 178.86702pt x 211.2975pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r-read-plot.PNG, id=3934, 1284.8pt x 571.13374pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr-read-plot.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr-read-plot.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr-read-plot.PNG used on input line 141.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-plot.
+PNG, id=3935, 1284.8pt x 571.13374pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-
+plot.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-p
+lot.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr-read-plot.PNG  used on input line 141.
 (pdftex.def)             Requested size: 357.73405pt x 159.01874pt.
 
 Underfull \vbox (badness 3849) has occurred while \output is active []
 
- [123 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figu
-res/ldr-read-xcos.PNG> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/u
-ser-code/ldr/figures/ldr-read-plot.PNG>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r-led-2.png, id=3945, 764.8575pt x 743.77875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr-led-2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr-led-2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr-led-2.png used on input line 194.
+ [123 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read
+-xcos.PNG> </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr
+-read-plot.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-2.png,
+ id=3946, 764.8575pt x 743.77875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-2
+.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-2.
+png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr-led-2.png  used on input line 194.
 (pdftex.def)             Requested size: 258.36281pt x 251.2358pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figures/ld
-r-led-read-plot.PNG, id=3950, 1284.8pt x 571.13374pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figur
-es/ldr-led-read-plot.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figure
-s/ldr-led-read-plot.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/ldr/figures/ldr-led-read-plot.PNG used on input line 215.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-read-p
+lot.PNG, id=3951, 1284.8pt x 571.13374pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-r
+ead-plot.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-re
+ad-plot.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
+r/figures/ldr-led-read-plot.PNG  used on input line 215.
 (pdftex.def)             Requested size: 357.73405pt x 159.01874pt.
 
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 224--244
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 224--244
  [][] 
  []
 
@@ -2104,136 +1949,133 @@ Underfull \vbox (badness 10000) has occurred while \output is active []
  [124]
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [125 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/figu
-res/ldr-led-2.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-
-code/ldr/figures/ldr-led-read-plot.PNG>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr
--read.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr
--read.py [126])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr
--read.py [127])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/python/ldr
--led.py [128])) (./user-code/ldr/ldr-julia.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-
-read.jl [129])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-
-read.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-
-read.jl [130])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/julia/ldr-
-led.jl)) (./user-code/ldr/ldr-OM.tex [131]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModeli
-ca/ldr-read.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModeli
-ca/ldr-read.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModeli
-ca/ldr-read.mo [132])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/ldr/OpenModeli
-ca/ldr-led.mo [133])) (./user-code/pot/pot-base.tex [134]
+ [125 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led-
+2.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led
+-read-plot.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+[126])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
+[127])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-led.py
+[128])) (./user-code/ldr/ldr-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+[129])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl
+[130])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-led.jl))
+(./user-code/ldr/ldr-OM.tex [131]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.
+mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.
+mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.
+mo [132])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-led.m
+o [133])) (./user-code/pot/pot-base.tex [134]
 Chapter 7.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/po
-tmeter.png, id=4228, 1576.38937pt x 1305.37688pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figur
-es/potmeter.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figure
-s/potmeter.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/pot/figures/potmeter.png used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png, 
+id=4229, 1576.38937pt x 1305.37688pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.
+png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.p
+ng>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
+t/figures/potmeter.png  used on input line 65.
 (pdftex.def)             Requested size: 178.86702pt x 148.11337pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/sc
-hematic.png, id=4229, 415.5525pt x 417.56pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figur
-es/schematic.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figure
-s/schematic.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/pot/figures/schematic.png used on input line 68.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png,
+ id=4230, 415.5525pt x 417.56pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic
+.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.
+png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
+t/figures/schematic.png  used on input line 68.
 (pdftex.def)             Requested size: 178.86702pt x 179.73206pt.
- [135
-
-] [136 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/fig
-ures/potmeter.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-
-code/pot/figures/schematic.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/PO
-T-led-bb.png, id=4246, 453.695pt x 243.309pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figur
-es/POT-led-bb.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figure
-s/POT-led-bb.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/pot/figures/POT-led-bb.png used on input line 113.
+[135
+
+] [136 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmete
+r.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schemat
+ic.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-bb.png
+, id=4247, 453.695pt x 243.309pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-b
+b.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-bb
+.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
+t/figures/POT-led-bb.png  used on input line 113.
 (pdftex.def)             Requested size: 397.48499pt x 213.16588pt.
- [137 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figu
-res/POT-led-bb.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/po
-t-threshold/pot-threshold.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/po
-t-threshold/pot-threshold.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/arduino/po
-t-threshold/pot-threshold.ino [138])) (./user-code/pot/pot-scilab.tex [139]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot
--threshold.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot
--threshold.sce)
+
+Overfull \hbox (9.68646pt too wide) in paragraph at lines 112--114
+ []    [] 
+ []
+
+[137 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/POT-led-b
+b.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/
+pot-threshold.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/
+pot-threshold.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/
+pot-threshold.ino [138])) (./user-code/pot/pot-scilab.tex [139]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.s
+ce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.s
+ce)
 Overfull \hbox (6.93184pt too wide) in paragraph at lines 39--43
 []\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-
 old. Avail-
  []
 
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/scilab/pot
--threshold.sce) [140]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figures/po
-t-threshold-1.PNG, id=4349, 1008.76875pt x 719.68875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figur
-es/pot-threshold-1.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figure
-s/pot-threshold-1.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/pot/figures/pot-threshold-1.PNG used on input line 60.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.s
+ce) [140]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold-
+1.PNG, id=4350, 1008.76875pt x 719.68875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-thres
+hold-1.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-thresh
+old-1.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
+t/figures/pot-threshold-1.PNG  used on input line 60.
 (pdftex.def)             Requested size: 357.73405pt x 255.22224pt.
 
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 78--107
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 78--107
  [][] 
  []
 
-[141 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/figur
-es/pot-threshold-1.PNG>]) (./user-code/pot/pot-python.tex
+[141 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-thres
+hold-1.png>]) (./user-code/pot/pot-python.tex
 Underfull \vbox (badness 4752) has occurred while \output is active []
 
  [142]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot
--threshold.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot
--threshold.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/python/pot
--threshold.py [143])) (./user-code/pot/pot-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.p
+y)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.p
+y)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.p
+y [143])) (./user-code/pot/pot-julia.tex
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
  [144]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-
-threshold.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-
-threshold.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+)
 Overfull \hbox (0.88127pt too wide) in paragraph at lines 36--40
 []\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-
 old. Avail-
  []
 
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/julia/pot-
-threshold.jl [145])) (./user-code/pot/pot-OM.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModeli
-ca/pot-threshold.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModeli
-ca/pot-threshold.mo) [146]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
+[145])) (./user-code/pot/pot-OM.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-thres
+hold.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-thres
+hold.mo) [146]
 Overfull \hbox (7.95369pt too wide) in paragraph at lines 36--40
 []\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-
 
@@ -2246,754 +2088,696 @@ Ex-am-ples -> pot -> pot_threshold.
  []
 
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/pot/OpenModeli
-ca/pot-threshold.mo [147])) (./user-code/thermistor/thermistor-base.tex
-[148]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-thres
+hold.mo [147])) (./user-code/thermistor/thermistor-base.tex [148]
 Chapter 8.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/NTC-bead.jpg, id=4552, 139.9629pt x 126.2316pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/NTC-bead.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/NTC-bead.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/NTC-bead.jpg used on input line 70.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bea
+d.jpg, id=4553, 139.9629pt x 126.2316pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NT
+C-bead.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC
+-bead.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/NTC-bead.jpg  used on input line 70.
 (pdftex.def)             Requested size: 178.86702pt x 161.32933pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/therm-sym.png, id=4555, 1284.8pt x 913.4125pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/therm-sym.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/therm-sym.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/therm-sym.png used on input line 73.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-s
+ym.png, id=4556, 1284.8pt x 913.4125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+erm-sym.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rm-sym.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/therm-sym.png  used on input line 73.
 (pdftex.def)             Requested size: 119.2467pt x 84.76808pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/THERMISTOR-Diagram-crop.pdf, id=4556, 329.23pt x 422.57875pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/THERMISTOR-Diagram-crop.pdf Graphic file (type pdf)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/THERMISTOR-Diagram-crop.pdf>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf used on input line 83.
-
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMIS
+TOR-Diagram-crop.pdf, id=4557, 329.23pt x 422.57875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/TH
+ERMISTOR-Diagram-crop.pdf Graphic file (type pdf)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THE
+RMISTOR-Diagram-crop.pdf>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/THERMISTOR-Diagram-crop.pdf  used on input line 83.
 (pdftex.def)             Requested size: 178.86702pt x 229.58835pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/BUZZER-Diagram-crop.pdf, id=4557, 307.1475pt x 366.36874pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/BUZZER-Diagram-crop.pdf Graphic file (type pdf)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/BUZZER-Diagram-crop.pdf>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/BUZZER-Diagram-crop.pdf used on input line 87.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-
+Diagram-crop.pdf, id=4558, 307.1475pt x 366.36874pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BU
+ZZER-Diagram-crop.pdf Graphic file (type pdf)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZ
+ZER-Diagram-crop.pdf>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/BUZZER-Diagram-crop.pdf  used on input line 87.
 (pdftex.def)             Requested size: 178.86702pt x 213.35492pt.
- [149
+[149
 
 ]
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [150 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermist
-or/figures/NTC-bead.jpg> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone
-/user-code/thermistor/figures/therm-sym.png> </Users/kannan/FOSS/scilab-arduino
-/floss-arduino-clone/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf> 
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/BUZZER-Diagram-crop.pdf>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/thermistor.png, id=4586, 453.695pt x 236.885pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/thermistor.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/thermistor.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/thermistor.png used on input line 110.
+ [150 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/N
+TC-bead.jpg> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/fi
+gures/therm-sym.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/therm
+istor/figures/THERMISTOR-Diagram-crop.pdf> </home/fossee/Desktop/floss-scilab-a
+rduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermis
+tor.png, id=4588, 453.695pt x 236.885pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+ermistor.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rmistor.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/thermistor.png  used on input line 110.
 (pdftex.def)             Requested size: 397.48499pt x 207.53772pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/thermistor-buzzer.png, id=4590, 453.695pt x 240.097pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/thermistor-buzzer.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/thermistor-buzzer.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/thermistor-buzzer.png used on input line 124.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/thermis
+tor-buzzer.png, id=4592, 453.695pt x 240.097pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+ermistor-buzzer.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rmistor-buzzer.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/thermistor-buzzer.png  used on input line 124.
 (pdftex.def)             Requested size: 397.48499pt x 210.35179pt.
- [151 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermist
-or/figures/thermistor.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/ard
-uino/therm-read/therm-read.ino) [152 </Users/kannan/FOSS/scilab-arduino/floss-a
-rduino-clone/user-code/thermistor/figures/thermistor-buzzer.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/ard
-uino/therm-read/therm-read.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/ard
-uino/therm-read/therm-read.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/ard
-uino/therm-buzzer/therm-buzzer.ino [153])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/ard
-uino/therm-read/therm-read.ino [154])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/ard
-uino/therm-buzzer/therm-buzzer.ino))
-(./user-code/thermistor/thermistor-scilab.tex
+ [151 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/t
+hermistor.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
+ead/therm-read.ino) [152 </home/fossee/Desktop/floss-scilab-arduino/user-code/t
+hermistor/figures/thermistor-buzzer.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
+ead/therm-read.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
+ead/therm-read.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-b
+uzzer/therm-buzzer.ino [153])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
+ead/therm-read.ino [154])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-b
+uzzer/therm-buzzer.ino)) (./user-code/thermistor/thermistor-scilab.tex
 Underfull \vbox (badness 5119) has occurred while \output is active []
 
  [155]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/sci
-lab/therm-read.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/sci
-lab/therm-read.sce) [156]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/sci
-lab/therm-buzzer.sce) [157]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/sci
-lab/therm-read.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/sci
-lab/therm-buzzer.sce [158])
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/therm-read-xcos.png, id=4753, 617.30624pt x 548.0475pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/therm-read-xcos.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/therm-read-xcos.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/therm-read-xcos.png used on input line 174.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-re
+ad.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-re
+ad.sce) [156]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-bu
+zzer.sce) [157]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-re
+ad.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-bu
+zzer.sce [158])
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-r
+ead-xcos.png, id=4755, 617.30624pt x 548.0475pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+erm-read-xcos.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rm-read-xcos.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/therm-read-xcos.png  used on input line 174.
 (pdftex.def)             Requested size: 194.76982pt x 172.91183pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/therm-read.png, id=4758, 632.3625pt x 529.98pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/therm-read.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/therm-read.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/therm-read.png used on input line 207.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-r
+ead.png, id=4760, 632.3625pt x 529.98pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+erm-read.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rm-read.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/therm-read.png  used on input line 207.
 (pdftex.def)             Requested size: 194.76982pt x 163.23271pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/therm-buzzer-xcos.png, id=4761, 627.34375pt x 530.98375pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/therm-buzzer-xcos.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/therm-buzzer-xcos.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/therm-buzzer-xcos.png used on input line 226.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-b
+uzzer-xcos.png, id=4763, 627.34375pt x 530.98375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+erm-buzzer-xcos.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rm-buzzer-xcos.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/therm-buzzer-xcos.png  used on input line 226.
 (pdftex.def)             Requested size: 258.36281pt x 218.68509pt.
- [159] [160 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/th
-ermistor/figures/therm-read-xcos.png>]
-Overfull \hbox (4.77843pt too wide) in paragraph at lines 248--268
+ [159] [160 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/fig
+ures/therm-read-xcos.png>]
+Overfull \hbox (4.77844pt too wide) in paragraph at lines 248--268
  [][] 
  []
 
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/fig
-ures/therm-buzzer.png, id=4794, 612.2875pt x 589.20125pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermisto
-r/figures/therm-buzzer.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor
-/figures/therm-buzzer.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/therm-buzzer.png used on input line 272.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-b
+uzzer.png, id=4796, 612.2875pt x 589.20125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+erm-buzzer.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
+rm-buzzer.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
+ermistor/figures/therm-buzzer.png  used on input line 272.
 (pdftex.def)             Requested size: 258.36281pt x 248.6226pt.
- [161 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermist
-or/figures/therm-read.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clo
-ne/user-code/thermistor/figures/therm-buzzer-xcos.png>]) (./user-code/thermisto
-r/thermistor-python.tex [162]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/pyt
-hon/therm-read.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/pyt
-hon/therm-read.py) [163 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/thermistor/figures/therm-buzzer.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/pyt
-hon/therm-buzzer.py) [164]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/pyt
-hon/therm-read.py) [165]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/pyt
-hon/therm-buzzer.py) [166]) (./user-code/thermistor/thermistor-julia.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/jul
-ia/therm-read.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/jul
-ia/therm-read.jl) [167]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/jul
-ia/therm-buzzer.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/jul
-ia/therm-read.jl [168])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/jul
-ia/therm-buzzer.jl)) (./user-code/thermistor/thermistor-OM.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/Ope
-nModelica/therm-read.mo) [169]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/Ope
-nModelica/therm-read.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/Ope
-nModelica/therm-buzzer.mo) [170]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/Ope
-nModelica/therm-read.mo) [171]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/thermistor/Ope
-nModelica/therm-buzzer.mo)) (./user-code/servo/servo-base.tex [172]
+[161 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
+erm-read.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/f
+igures/therm-buzzer-xcos.png>]) (./user-code/thermistor/thermistor-python.tex
+[162]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-re
+ad.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-re
+ad.py) [163 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/fig
+ures/therm-buzzer.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-bu
+zzer.py) [164]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-re
+ad.py) [165]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-bu
+zzer.py) [166]) (./user-code/thermistor/thermistor-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-rea
+d.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-rea
+d.jl) [167]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buz
+zer.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-rea
+d.jl [168])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buz
+zer.jl)) (./user-code/thermistor/thermistor-OM.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
+erm-read.mo) [169]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
+erm-read.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
+erm-buzzer.mo) [170]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
+erm-read.mo) [171]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
+erm-buzzer.mo)) (./user-code/servo/servo-base.tex [172]
 Chapter 9.
 [173
 
 ]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-uno-shield.jpg, id=5116, 1110.0672pt x 508.7808pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-uno-shield.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-uno-shield.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-uno-shield.jpg used on input line 82.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-uno-sh
+ield.jpg, id=5119, 1110.0672pt x 508.7808pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-u
+no-shield.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-un
+o-shield.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-uno-shield.jpg  used on input line 82.
 (pdftex.def)             Requested size: 258.36281pt x 118.41452pt.
- [174 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fi
-gures/servo-uno-shield.jpg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-bb.png, id=5122, 446.468pt x 316.382pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-bb.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-bb.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-bb.png used on input line 119.
+ [174 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
+uno-shield.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-bb.png
+, id=5125, 446.468pt x 316.382pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-b
+b.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-bb
+.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-bb.png  used on input line 119.
 (pdftex.def)             Requested size: 357.73405pt x 253.51628pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-pot-bb.png, id=5128, 446.468pt x 286.671pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-pot-bb.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-pot-bb.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-pot-bb.png used on input line 133.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot-bb
+.png, id=5131, 446.468pt x 286.671pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-p
+ot-bb.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-po
+t-bb.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-pot-bb.png  used on input line 133.
 (pdftex.def)             Requested size: 357.73405pt x 229.70891pt.
- [175 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fi
-gures/servo-bb.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-init/servo-init.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-init/servo-init.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-init/servo-init.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-init/servo-init.ino) [176 </Users/kannan/FOSS/scilab-arduino/floss-arduin
-o-clone/user-code/servo/figures/servo-pot-bb.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-reverse/servo-reverse.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-pot/servo-pot.ino) [177]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-init/servo-init.ino) [178]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-reverse/servo-reverse.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-loop/servo-loop.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/arduino/
-servo-pot/servo-pot.ino [179])) (./user-code/servo/servo-scilab.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-init.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-init.sce) [180]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-reverse.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-pot.sce) [181]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-init.sce)
+ [175 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
+bb.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/s
+ervo-init.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/s
+ervo-init.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/s
+ervo-init.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/s
+ervo-init.ino) [176 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/
+figures/servo-pot-bb.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-revers
+e/servo-reverse.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/se
+rvo-pot.ino) [177]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/s
+ervo-init.ino) [178]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-revers
+e/servo-reverse.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-loop/s
+ervo-loop.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/se
+rvo-pot.ino [179])) (./user-code/servo/servo-scilab.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sc
+e)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sc
+e) [180]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse
+.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+) [181]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sc
+e)
 Overfull \hbox (2.47322pt too wide) in paragraph at lines 131--135
 []\T1/cmr/m/n/10.95 Rotating the ser-vo-mo-tor to a spec-i-fied de-gree and re-
 vers-ing. Avail-
  []
 
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-reverse.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-loop.sce) [182]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/scilab/s
-ervo-pot.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-init.png, id=5332, 265.74281pt x 309.40594pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-init.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-init.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-init.png used on input line 170.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse
+.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-loop.sc
+e) [182]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
+)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.p
+ng, id=5336, 265.74281pt x 309.40594pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-i
+nit.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-in
+it.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-init.png  used on input line 170.
 (pdftex.def)             Requested size: 178.86702pt x 208.2593pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-reverse.png, id=5338, 244.66406pt x 281.55188pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-reverse.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-reverse.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-reverse.png used on input line 205.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-revers
+e.png, id=5342, 244.66406pt x 281.55188pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-r
+everse.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-re
+verse.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-reverse.png  used on input line 205.
 (pdftex.def)             Requested size: 178.86702pt x 205.84047pt.
  [183]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-loop.png, id=5361, 281.55188pt x 347.04657pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-loop.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-loop.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-loop.png used on input line 243.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.p
+ng, id=5365, 281.55188pt x 347.04657pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-l
+oop.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-lo
+op.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-loop.png  used on input line 243.
 (pdftex.def)             Requested size: 178.86702pt x 220.47803pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figures/
-servo-pot.png, id=5367, 286.06876pt x 292.09125pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-pot.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/figu
-res/servo-pot.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/servo/figures/servo-pot.png used on input line 285.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.pn
+g, id=5371, 286.06876pt x 292.09125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-p
+ot.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-po
+t.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
+rvo/figures/servo-pot.png  used on input line 285.
 (pdftex.def)             Requested size: 178.86702pt x 182.63234pt.
- [184 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fi
-gures/servo-init.png>]
-Overfull \hbox (17.60951pt too wide) in paragraph at lines 306--317
+ [184 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
+init.png>]
+Overfull \hbox (17.60953pt too wide) in paragraph at lines 306--317
  [][] 
  []
 
-[185 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fig
-ures/servo-reverse.png>]
+[185 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-r
+everse.png>]
 Underfull \vbox (badness 1831) has occurred while \output is active []
 
- [186 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fi
-gures/servo-loop.png>]) (./user-code/servo/servo-python.tex
+ [186 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
+loop.png>])
+(./user-code/servo/servo-python.tex
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [187 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/fi
-gures/servo-pot.png>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-init.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-init.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-reverse.py) [188]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-pot.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-init.py [189])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-reverse.py [190])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-loop.py [191])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/python/s
-ervo-pot.py [192])) (./user-code/servo/servo-julia.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-init.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-init.jl) [193]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-reverse.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-pot.jl) [194]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-init.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-reverse.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-loop.jl) [195]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/julia/se
-rvo-pot.jl)) (./user-code/servo/servo-OM.tex
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-init.mo) [196]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-init.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-reverse.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-pot.mo) [197]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-init.mo [198])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-reverse.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-loop.mo [199])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/servo/OpenMode
-lica/servo-pot.mo [200])) (./user-code/dcmotor/dcmotor-base.tex [201] [202
+ [187 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
+pot.png>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse
+.py) [188]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py)
+
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
+[189])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse
+.py [190])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-loop.py
+[191])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
+[192])) (./user-code/servo/servo-julia.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl)
+[193]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.
+jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl)
+[194]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl)
+
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.
+jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-loop.jl)
+[195]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl))
+(./user-code/servo/servo-OM.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-i
+nit.mo) [196]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-i
+nit.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-r
+everse.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-p
+ot.mo) [197]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-i
+nit.mo [198])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-r
+everse.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-l
+oop.mo [199])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-p
+ot.mo [200])) (./user-code/dcmotor/dcmotor-base.tex [201] [202
 
 ]
 Chapter 10.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/dcmotor_board.png, id=5870, 247.92625pt x 232.87pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/dcmotor_board.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/dcmotor_board.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/dcmotor_board.png used on input line 68.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_bo
+ard.png, id=5874, 247.92625pt x 232.87pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
+or_board.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
+r_board.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/dcmotor_board.png  used on input line 68.
 (pdftex.def)             Requested size: 258.36281pt x 242.69075pt.
- [203]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/uno-pwm.jpg, id=5878, 426.8748pt x 319.9152pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/uno-pwm.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/uno-pwm.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/uno-pwm.jpg used on input line 106.
+[203]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-pwm.jp
+g, id=5882, 426.8748pt x 319.9152pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-p
+wm.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-pw
+m.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/uno-pwm.jpg  used on input line 106.
 (pdftex.def)             Requested size: 258.36281pt x 193.63959pt.
- [204 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/
-figures/dcmotor_board.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/schematic.png, id=5886, 415.5525pt x 467.7475pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/schematic.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/schematic.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/schematic.png used on input line 129.
+ [204 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmo
+tor_board.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.
+png, id=5890, 415.5525pt x 467.7475pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schem
+atic.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schema
+tic.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/schematic.png  used on input line 129.
 (pdftex.def)             Requested size: 178.86702pt x 201.33447pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/dc_motor_description.jpg, id=5887, 2469.97781pt x 1973.12157pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/dc_motor_description.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/dc_motor_description.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/dc_motor_description.jpg used on input line 135.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_d
+escription.jpg, id=5891, 2469.97781pt x 1973.12157pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_mo
+tor_description.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_mot
+or_description.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/dc_motor_description.jpg  used on input line 135.
 (pdftex.def)             Requested size: 258.36281pt x 206.38603pt.
- [205 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/
-figures/uno-pwm.jpg>]
+ [205 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/uno-
+pwm.jpg>]
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [206 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/
-figures/schematic.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/u
-ser-code/dcmotor/figures/dc_motor_description.jpg>]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-clock/dcmotor-clock.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-clock/dcmotor-clock.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-clock/dcmotor-clock.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-both/dcmotor-both.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-both/dcmotor-both.ino) [207]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-clock/dcmotor-clock.ino)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-both/dcmotor-both.ino [208])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/arduin
-o/dcmotor-loop/dcmotor-loop.ino)) (./user-code/dcmotor/dcmotor-scilab.tex
+ [206 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/sche
+matic.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures
+/dc_motor_description.jpg>]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-cl
+ock/dcmotor-clock.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-cl
+ock/dcmotor-clock.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-cl
+ock/dcmotor-clock.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-bo
+th/dcmotor-both.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-bo
+th/dcmotor-both.ino) [207]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-cl
+ock/dcmotor-clock.ino)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-bo
+th/dcmotor-both.ino [208])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-lo
+op/dcmotor-loop.ino)) (./user-code/dcmotor/dcmotor-scilab.tex
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
  [209]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-clock.sce) [210]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-clock.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-clock.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-clock.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-both.sce) [211]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-both.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-clock.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-both.sce [212])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/scilab
-/dcmotor-loop.sce)
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/dcmotor-clock.png, id=6067, 807.015pt x 738.76pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/dcmotor-clock.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/dcmotor-clock.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/dcmotor-clock.png used on input line 294.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
+ck.sce) [210]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
+ck.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
+ck.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
+ck.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-bot
+h.sce) [211]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-bot
+h.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
+ck.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-bot
+h.sce [212])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-loo
+p.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-cl
+ock.png, id=6071, 807.015pt x 738.76pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
+or-clock.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
+r-clock.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/dcmotor-clock.png  used on input line 294.
 (pdftex.def)             Requested size: 178.86702pt x 163.73386pt.
  [213]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/dcmotor-both.png, id=6103, 784.9325pt x 716.6775pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/dcmotor-both.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/dcmotor-both.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/dcmotor-both.png used on input line 348.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-bo
+th.png, id=6107, 784.9325pt x 716.6775pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
+or-both.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
+r-both.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/dcmotor-both.png  used on input line 348.
 (pdftex.def)             Requested size: 178.86702pt x 163.3123pt.
- [214 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/
-figures/dcmotor-clock.png>] [215 </Users/kannan/FOSS/scilab-arduino/floss-ardui
-no-clone/user-code/dcmotor/figures/dcmotor-both.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/figure
-s/dcmotor-loop.png, id=6122, 775.89874pt x 756.8275pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/f
-igures/dcmotor-loop.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/fi
-gures/dcmotor-loop.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/dcmotor/figures/dcmotor-loop.png used on input line 392.
+ [214 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmo
+tor-clock.png>] [215 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmot
+or/figures/dcmotor-both.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-lo
+op.png, id=6126, 775.89874pt x 756.8275pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
+or-loop.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
+r-loop.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
+motor/figures/dcmotor-loop.png  used on input line 392.
 (pdftex.def)             Requested size: 178.86702pt x 174.47084pt.
-) (./user-code/dcmotor/dcmotor-python.tex [216 </Users/kannan/FOSS/scilab-ardui
-no/floss-arduino-clone/user-code/dcmotor/figures/dcmotor-loop.png>] [217]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-clock.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-clock.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-clock.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-clock.py) [218]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-both.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-both.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-clock.py [219])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-both.py [220])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/python
-/dcmotor-loop.py [221])) (./user-code/dcmotor/dcmotor-julia.tex [222]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-clock.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-clock.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-clock.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-clock.jl) [223]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-both.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-both.jl) [224]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-clock.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-both.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/julia/
-dcmotor-loop.jl)) (./user-code/dcmotor/dcmotor-OM.tex [225]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-clock.mo) [226]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-clock.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-clock.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-clock.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-both.mo) [227]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-both.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-clock.mo [228])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-both.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/dcmotor/OpenMo
-delica/dcmotor-loop.mo [229])) (./user-code/modbus/modbus-base.tex [230]
+)
+(./user-code/dcmotor/dcmotor-python.tex [216 </home/fossee/Desktop/floss-scilab
+-arduino/user-code/dcmotor/figures/dcmotor-loop.png>] [217]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clo
+ck.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clo
+ck.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clo
+ck.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clo
+ck.py) [218]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-bot
+h.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-bot
+h.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clo
+ck.py [219])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-bot
+h.py [220])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-loo
+p.py [221])) (./user-code/dcmotor/dcmotor-julia.tex [222]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-cloc
+k.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-cloc
+k.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-cloc
+k.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-cloc
+k.jl) [223]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both
+.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both
+.jl) [224]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-cloc
+k.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both
+.jl)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-loop
+.jl)) (./user-code/dcmotor/dcmotor-OM.tex [225]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-clock.mo) [226]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-clock.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-clock.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-clock.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-both.mo) [227]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-both.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-clock.mo [228])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-both.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
+or-loop.mo [229])) (./user-code/modbus/modbus-base.tex [230]
 Chapter 11.
 [231
 
 ]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/fig1.png, id=6579, 672.5125pt x 224.84pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/fig1.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/fig1.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/fig1.png used on input line 66.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png, i
+d=6583, 672.5125pt x 224.84pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.p
+ng Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.pn
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/fig1.png  used on input line 66.
 (pdftex.def)             Requested size: 357.73405pt x 119.60033pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/fig2.png, id=6580, 360.34625pt x 375.4025pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/fig2.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/fig2.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/fig2.png used on input line 74.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png, i
+d=6584, 360.34625pt x 375.4025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.p
+ng Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.pn
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/fig2.png  used on input line 74.
 (pdftex.def)             Requested size: 178.86702pt x 186.33748pt.
- [232 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/fig1.png (PNG copy)> </Users/kannan/FOSS/scilab-arduino/floss-arduino-cl
-one/user-code/modbus/figures/fig2.png (PNG copy)>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/fig3.png, id=6589, 481.04718pt x 214.55156pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/fig3.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/fig3.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/fig3.png used on input line 120.
+ [232 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.
+png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/fig
+ures/fig2.png (PNG copy)>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png, i
+d=6593, 481.04718pt x 214.55156pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.p
+ng Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.pn
+g>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/fig3.png  used on input line 120.
 (pdftex.def)             Requested size: 357.73405pt x 159.55464pt.
- [233 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/fig3.png (PNG copy)>] [234] [235] [236] [237]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/block-diagram.PNG, id=6639, 398.23781pt x 255.95625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/block-diagram.PNG Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/block-diagram.PNG>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/block-diagram.PNG used on input line 419.
+ [233 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.
+png (PNG copy)>] [234] [235] [236] [237]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagr
+am.PNG, id=6643, 398.23781pt x 255.95625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-
+diagram.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-d
+iagram.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/block-diagram.PNG  used on input line 419.
 (pdftex.def)             Requested size: 258.36281pt x 166.06104pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/Full-Set-Up.png, id=6640, 722.7pt x 542.025pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/Full-Set-Up.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/Full-Set-Up.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/Full-Set-Up.png used on input line 426.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up
+.png, id=6644, 722.7pt x 542.025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-S
+et-Up.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Se
+t-Up.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/Full-Set-Up.png  used on input line 426.
 (pdftex.def)             Requested size: 258.36281pt x 193.77246pt.
- [238 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/block-diagram.PNG>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/arduino_code_flowchart.png, id=6653, 327.2225pt x 480.79625pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/arduino_code_flowchart.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/arduino_code_flowchart.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/arduino_code_flowchart.png used on input line 465.
+
+[238 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-
+diagram.PNG>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_cod
+e_flowchart.png, id=6657, 327.2225pt x 480.79625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduin
+o_code_flowchart.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino
+_code_flowchart.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/arduino_code_flowchart.png  used on input line 465.
 (pdftex.def)             Requested size: 258.36281pt x 379.61945pt.
- [239 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/Full-Set-Up.png>] [240 </Users/kannan/FOSS/scilab-arduino/floss-arduino-
-clone/user-code/modbus/figures/arduino_code_flowchart.png>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/flowchart.png, id=6674, 482.55281pt x 362.10281pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/flowchart.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/flowchart.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/flowchart.png used on input line 491.
+ [239 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-
+Set-Up.png>] [240 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/f
+igures/arduino_code_flowchart.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.p
+ng, id=6678, 482.55281pt x 362.10281pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowch
+art.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowcha
+rt.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/flowchart.png  used on input line 491.
 (pdftex.def)             Requested size: 357.73405pt x 268.44914pt.
 
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/arduino
-/send_packet.ino [241 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/us
-er-code/modbus/figures/flowchart.png (PNG copy)>]))
-(./user-code/modbus/modbus-scilab.tex
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send_packet
+.ino [241 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/f
+lowchart.png (PNG copy)>])) (./user-code/modbus/modbus-scilab.tex
 Underfull \vbox (badness 2951) has occurred while \output is active []
 
  [242]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/
-read_val.sce)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/
-read_current.sci)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/
-read_voltage.sci [243])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/scilab/
-read_active_power.sci) [244]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/current-output.png, id=6761, 490.83376pt x 170.13562pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/current-output.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/current-output.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/current-output.png used on input line 143.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_val.sce
+)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_current
+.sci)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_voltage
+.sci [243])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_active_
+power.sci) [244]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-out
+put.png, id=6765, 490.83376pt x 170.13562pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/curren
+t-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current
+-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/current-output.png  used on input line 143.
 (pdftex.def)             Requested size: 397.48499pt x 137.78313pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/current-output-setup.jpg, id=6762, 277.035pt x 248.127pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/current-output-setup.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/current-output-setup.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/current-output-setup.jpg used on input line 150.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-out
+put-setup.jpg, id=6766, 277.035pt x 248.127pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/curren
+t-output-setup.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current
+-output-setup.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/current-output-setup.jpg  used on input line 150.
 (pdftex.def)             Requested size: 258.36281pt x 231.40312pt.
- [245 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/current-output.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clo
-ne/user-code/modbus/figures/current-output-setup.jpg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/voltage-output.png, id=6772, 487.8225pt x 155.07938pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/voltage-output.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/voltage-output.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/voltage-output.png used on input line 162.
+ [245 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/curre
+nt-output.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figu
+res/current-output-setup.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-out
+put.png, id=6776, 487.8225pt x 155.07938pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltag
+e-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage
+-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/voltage-output.png  used on input line 162.
 (pdftex.def)             Requested size: 397.48499pt x 126.36134pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/voltage-output-setup.jpg, id=6773, 261.1356pt x 269.808pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/voltage-output-setup.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/voltage-output-setup.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/voltage-output-setup.jpg used on input line 169.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-out
+put-setup.jpg, id=6777, 261.1356pt x 269.808pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltag
+e-output-setup.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage
+-output-setup.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/voltage-output-setup.jpg  used on input line 169.
 (pdftex.def)             Requested size: 258.36281pt x 266.95018pt.
-
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/active-power-output.png, id=6776, 492.33937pt x 185.94469pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/active-power-output.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/active-power-output.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/active-power-output.png used on input line 179.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-powe
+r-output.png, id=6780, 492.33937pt x 185.94469pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active
+-power-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-
+power-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/active-power-output.png  used on input line 179.
 (pdftex.def)             Requested size: 397.48499pt x 150.12634pt.
- [246 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/voltage-output.png> </Users/kannan/FOSS/scilab-arduino/floss-arduino-clo
-ne/user-code/modbus/figures/voltage-output-setup.jpg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/active-power-output-setup.jpg, id=6782, 306.9066pt x 264.99pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/active-power-output-setup.jpg Graphic file (type jpg)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/active-power-output-setup.jpg>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/active-power-output-setup.jpg used on input line 186.
+ [246 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/volta
+ge-output.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figu
+res/voltage-output-setup.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-powe
+r-output-setup.jpg, id=6786, 306.9066pt x 264.99pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active
+-power-output-setup.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-
+power-output-setup.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/active-power-output-setup.jpg  used on input line 186.
 (pdftex.def)             Requested size: 258.36281pt x 223.0955pt.
- [247 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/active-power-output.png> </Users/kannan/FOSS/scilab-arduino/floss-arduin
-o-clone/user-code/modbus/figures/active-power-output-setup.jpg>]
-</Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/figures
-/read_value_xcos.png, id=6790, 635.37375pt x 455.7025pt>
-File: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fi
-gures/read_value_xcos.png Graphic file (type png)
-
-<use /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/fig
-ures/read_value_xcos.png>
-Package pdftex.def Info: /Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/
-user-code/modbus/figures/read_value_xcos.png used on input line 207.
+
+[247 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active
+-power-output.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/
+figures/active-power-output-setup.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_
+xcos.png, id=6794, 635.37375pt x 455.7025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_v
+alue_xcos.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_va
+lue_xcos.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
+dbus/figures/read_value_xcos.png  used on input line 207.
 (pdftex.def)             Requested size: 258.36281pt x 185.30946pt.
 
 Underfull \hbox (badness 1259) in paragraph at lines 210--210
@@ -3002,36 +2786,36 @@ s. This is what
  []
 
 
-Overfull \hbox (16.70491pt too wide) in paragraph at lines 223--235
+Overfull \hbox (16.70493pt too wide) in paragraph at lines 223--235
  [][] 
  []
 
 ) (./user-code/modbus/modbus-python.tex
 Underfull \vbox (badness 1270) has occurred while \output is active []
 
- [248 </Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/f
-igures/read_value_xcos.png>]
+ [248 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_
+value_xcos.png>]
 Underfull \vbox (badness 2680) has occurred while \output is active []
 
  [249]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/
-read_current.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/
-read_voltage.py)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/python/
-read_active_power.py)) (./user-code/modbus/modbus-julia.tex [250]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/r
-eadCurrent.jl [251])
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/r
-eadVoltage.jl)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/julia/r
-eadPower.jl)) (./user-code/modbus/modbus-OM.tex [252] [253]
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenMod
-elica/readCurrent.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenMod
-elica/readVoltage.mo)
-(/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone/user-code/modbus/OpenMod
-elica/readPower.mo)) (./floss-arduino.bbl [254]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_current
+.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_voltage
+.py)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_active_
+power.py)) (./user-code/modbus/modbus-julia.tex [250]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.j
+l [251])
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.j
+l)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl)
+) (./user-code/modbus/modbus-OM.tex [252] [253]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCu
+rrent.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVo
+ltage.mo)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPo
+wer.mo)) (./floss-arduino.bbl [254]
 Underfull \hbox (badness 10000) in paragraph at lines 4--9
 []\T1/cmr/m/n/10.95 T. Mar-tin.  Use of scilab for space mis-sion anal-y-sis.
  []
@@ -3094,44 +2878,39 @@ Package rerunfilecheck Info: File `floss-arduino.out' has not changed.
 Package atveryend Info: Empty hook `AtVeryVeryEnd' on input line 253.
  ) 
 Here is how much of TeX's memory you used:
- 16737 strings out of 492995
- 330139 string characters out of 6132705
- 527402 words of memory out of 5000000
- 15388 multiletter control sequences out of 15000+600000
- 25723 words of font info for 57 fonts, out of 8000000 for 9000
+ 17660 strings out of 481239
+ 347360 string characters out of 5920377
+ 817065 words of memory out of 5000000
+ 27975 multiletter control sequences out of 15000+600000
+ 556115 words of font info for 72 fonts, out of 8000000 for 9000
  1143 hyphenation exceptions out of 8191
- 44i,14n,59p,797b,781s stack positions out of 5000i,500n,10000p,200000b,80000s
-{/usr/local/texlive/2017/texmf-dist/fonts/enc/dvips/cm-super/cm-super-t1.enc}
-{/usr/local/texlive/2017/texmf-dist/fonts/enc/dvips/base/8r.enc}</usr/local/tex
-live/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb></usr/local/texl
-ive/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb></usr/local/texli
-ve/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb></usr/local/texlive
-/2017/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr/local/texlive/20
-17/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb></usr/local/texlive/2017/
-texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb></usr/local/texlive/2017/t
-exmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb></usr/local/texlive/2017/tex
-mf-dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb></usr/local/texlive/2017/texmf
--dist/fonts/type1/public/amsfonts/cm/cmsy9.pfb></usr/local/texlive/2017/texmf-d
-ist/fonts/type1/public/bera/fvmr8a.pfb></usr/local/texlive/2017/texmf-dist/font
-s/type1/public/cm-super/sfbx0900.pfb></usr/local/texlive/2017/texmf-dist/fonts/
-type1/public/cm-super/sfbx1095.pfb></usr/local/texlive/2017/texmf-dist/fonts/ty
-pe1/public/cm-super/sfbx1200.pfb></usr/local/texlive/2017/texmf-dist/fonts/type
-1/public/cm-super/sfbx1440.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/
-public/cm-super/sfbx2074.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/pu
-blic/cm-super/sfbx2488.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/publ
-ic/cm-super/sfrm0500.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public
-/cm-super/sfrm0600.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/c
-m-super/sfrm0800.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-
-super/sfrm0900.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-su
-per/sfrm1000.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-supe
-r/sfrm1095.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/
-sfsi1095.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sf
-ss1095.pfb></usr/local/texlive/2017/texmf-dist/fonts/type1/public/cm-super/sfti
-1095.pfb>
-Output written on floss-arduino.pdf (282 pages, 31884402 bytes).
+ 50i,10n,53p,803b,1950s stack positions out of 5000i,500n,10000p,200000b,80000s
+{/usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-t1.enc}{/usr/share/texmf/
+fonts/enc/dvips/cm-super/cm-super-ts1.enc}{/usr/share/texlive/texmf-dist/fonts/
+enc/dvips/base/8r.enc}</usr/share/texlive/texmf-dist/fonts/type1/public/amsfont
+s/cm/cmex10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/c
+mmi10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.p
+fb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr
+/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb></usr/share/t
+exlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb></usr/share/texlive
+/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb></usr/share/texlive/texmf-
+dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb></usr/share/texlive/texmf-dist/fo
+nts/type1/public/amsfonts/cm/cmsy9.pfb></usr/share/texlive/texmf-dist/fonts/typ
+e1/public/bera/fvmr8a.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx090
+0.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx1095.pfb></usr/share/te
+xmf/fonts/type1/public/cm-super/sfbx1200.pfb></usr/share/texmf/fonts/type1/publ
+ic/cm-super/sfbx1440.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx2074
+.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx2488.pfb></usr/share/tex
+mf/fonts/type1/public/cm-super/sfrm0600.pfb></usr/share/texmf/fonts/type1/publi
+c/cm-super/sfrm0800.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm0900.
+pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm1000.pfb></usr/share/texm
+f/fonts/type1/public/cm-super/sfrm1095.pfb></usr/share/texmf/fonts/type1/public
+/cm-super/sfsi1095.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfss1095.p
+fb></usr/share/texmf/fonts/type1/public/cm-super/sfti1095.pfb>
+Output written on floss-arduino.pdf (282 pages, 31877233 bytes).
 PDF statistics:
- 7829 PDF objects out of 8907 (max. 8388607)
- 7229 compressed objects within 73 object streams
- 3852 named destinations out of 4296 (max. 500000)
+ 7837 PDF objects out of 8907 (max. 8388607)
+ 7238 compressed objects within 73 object streams
+ 3853 named destinations out of 4296 (max. 500000)
  2297 words of extra memory for PDF output out of 10000 (max. 10000000)
 
diff --git a/floss-arduino.lot b/floss-arduino.lot
index 1ea5c41..360a306 100644
--- a/floss-arduino.lot
+++ b/floss-arduino.lot
@@ -1,41 +1,41 @@
 \addvspace {10\p@ }
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {2.1}{\ignorespaces Arduino Uno hardware specifications\relax }}{10}{table.caption.14}
-\contentsline {table}{\numberline {2.2}{\ignorespaces Values of components used in the shield\relax }}{15}{table.caption.25}
-\contentsline {table}{\numberline {2.3}{\ignorespaces Information on sensors and pin numbers\relax }}{15}{table.caption.26}
+\contentsline {table}{\numberline {2.1}{\ignorespaces Arduino Uno hardware specifications\relax }}{10}{table.caption.14}%
+\contentsline {table}{\numberline {2.2}{\ignorespaces Values of components used in the shield\relax }}{15}{table.caption.25}%
+\contentsline {table}{\numberline {2.3}{\ignorespaces Information on sensors and pin numbers\relax }}{15}{table.caption.26}%
 \addvspace {10\p@ }
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {4.1}{\ignorespaces Parameters to light the blue LED in Xcos\relax }}{77}{table.caption.80}
-\contentsline {table}{\numberline {4.2}{\ignorespaces Parameters to light the blue LED in Xcos for two seconds\relax }}{78}{table.caption.82}
-\contentsline {table}{\numberline {4.3}{\ignorespaces Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }}{79}{table.caption.84}
-\contentsline {table}{\numberline {4.4}{\ignorespaces Parameters to make the green LED blink every second\relax }}{80}{table.caption.86}
+\contentsline {table}{\numberline {4.1}{\ignorespaces Parameters to light the blue LED in Xcos\relax }}{77}{table.caption.80}%
+\contentsline {table}{\numberline {4.2}{\ignorespaces Parameters to light the blue LED in Xcos for two seconds\relax }}{78}{table.caption.82}%
+\contentsline {table}{\numberline {4.3}{\ignorespaces Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }}{79}{table.caption.84}%
+\contentsline {table}{\numberline {4.4}{\ignorespaces Parameters to make the green LED blink every second\relax }}{80}{table.caption.86}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {5.1}{\ignorespaces Parameters to print the push button status on the display block\relax }}{103}{table.caption.92}
-\contentsline {table}{\numberline {5.2}{\ignorespaces Xcos parameters to turn the LED on through the pushbutton\relax }}{104}{table.caption.94}
+\contentsline {table}{\numberline {5.1}{\ignorespaces Parameters to print the push button status on the display block\relax }}{103}{table.caption.92}%
+\contentsline {table}{\numberline {5.2}{\ignorespaces Xcos parameters to turn the LED on through the pushbutton\relax }}{104}{table.caption.94}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {6.1}{\ignorespaces Xcos parameters to read LDR\relax }}{124}{table.caption.101}
-\contentsline {table}{\numberline {6.2}{\ignorespaces Xcos parameters to read LDR and regulate blue LED\relax }}{126}{table.caption.104}
+\contentsline {table}{\numberline {6.1}{\ignorespaces Xcos parameters to read LDR\relax }}{124}{table.caption.101}%
+\contentsline {table}{\numberline {6.2}{\ignorespaces Xcos parameters to read LDR and regulate blue LED\relax }}{126}{table.caption.104}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {7.1}{\ignorespaces Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }}{142}{table.caption.108}
+\contentsline {table}{\numberline {7.1}{\ignorespaces Xcos parameters to turn on different LEDs depending on the potentiometer value\relax }}{142}{table.caption.108}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {8.1}{\ignorespaces Xcos parameters to read thermistor\relax }}{160}{table.caption.116}
-\contentsline {table}{\numberline {8.2}{\ignorespaces Xcos parameters to read thermistor and switch the buzzer\relax }}{162}{table.caption.119}
+\contentsline {table}{\numberline {8.1}{\ignorespaces Xcos parameters to read thermistor\relax }}{160}{table.caption.116}%
+\contentsline {table}{\numberline {8.2}{\ignorespaces Xcos parameters to read thermistor and switch the buzzer\relax }}{162}{table.caption.119}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {9.1}{\ignorespaces Connecting a typical servomotor to Arduino Uno\ board\relax }}{174}{table.caption.126}
-\contentsline {table}{\numberline {9.2}{\ignorespaces Parameters to rotate the servomotor by $30^\circ $\relax }}{183}{table.caption.130}
-\contentsline {table}{\numberline {9.3}{\ignorespaces Parameters to rotate the servomotor forward and reverse\relax }}{185}{table.caption.132}
-\contentsline {table}{\numberline {9.4}{\ignorespaces Parameters to make the servomotor to sweep the entire range in increments\relax }}{186}{table.caption.134}
-\contentsline {table}{\numberline {9.5}{\ignorespaces Parameters to rotate the servomotor based on the input from the potentiometer\relax }}{187}{table.caption.136}
+\contentsline {table}{\numberline {9.1}{\ignorespaces Connecting a typical servomotor to Arduino Uno\ board\relax }}{174}{table.caption.126}%
+\contentsline {table}{\numberline {9.2}{\ignorespaces Parameters to rotate the servomotor by $30^\circ $\relax }}{183}{table.caption.130}%
+\contentsline {table}{\numberline {9.3}{\ignorespaces Parameters to rotate the servomotor forward and reverse\relax }}{185}{table.caption.132}%
+\contentsline {table}{\numberline {9.4}{\ignorespaces Parameters to make the servomotor to sweep the entire range in increments\relax }}{186}{table.caption.134}%
+\contentsline {table}{\numberline {9.5}{\ignorespaces Parameters to rotate the servomotor based on the input from the potentiometer\relax }}{187}{table.caption.136}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {10.1}{\ignorespaces Values in the Scilab\ command for different H-Bridge circuits\relax }}{204}{table.caption.138}
-\contentsline {table}{\numberline {10.2}{\ignorespaces Xcos parameters to drive the DC motor for a specified time\relax }}{214}{table.caption.146}
-\contentsline {table}{\numberline {10.3}{\ignorespaces Xcos parameters to drive the DC motor in forward and reverse directions\relax }}{215}{table.caption.148}
-\contentsline {table}{\numberline {10.4}{\ignorespaces Xcos parameters to drive the DC motor in a loop\relax }}{217}{table.caption.150}
+\contentsline {table}{\numberline {10.1}{\ignorespaces Values in the Scilab\ command for different H-Bridge circuits\relax }}{204}{table.caption.138}%
+\contentsline {table}{\numberline {10.2}{\ignorespaces Xcos parameters to drive the DC motor for a specified time\relax }}{214}{table.caption.146}%
+\contentsline {table}{\numberline {10.3}{\ignorespaces Xcos parameters to drive the DC motor in forward and reverse directions\relax }}{215}{table.caption.148}%
+\contentsline {table}{\numberline {10.4}{\ignorespaces Xcos parameters to drive the DC motor in a loop\relax }}{217}{table.caption.150}%
 \addvspace {10\p@ }
-\contentsline {table}{\numberline {11.1}{\ignorespaces Pins available on RS485 and their usage\relax }}{233}{table.caption.159}
-\contentsline {table}{\numberline {11.2}{\ignorespaces Operations supported by Modbus RTU\relax }}{234}{table.caption.161}
-\contentsline {table}{\numberline {11.3}{\ignorespaces Individual parameter address in EM6400\relax }}{234}{table.caption.162}
-\contentsline {table}{\numberline {11.4}{\ignorespaces A request packet to access V1 in EM6400\relax }}{235}{table.caption.164}
-\contentsline {table}{\numberline {11.5}{\ignorespaces A response packet to access V1 in EM6400\relax }}{236}{table.caption.165}
-\contentsline {table}{\numberline {11.6}{\ignorespaces Memory storage of a four-byte integer in little-endian and big-endian\relax }}{237}{table.caption.166}
-\contentsline {table}{\numberline {11.7}{\ignorespaces Xcos parameters to read Energy Meter\relax }}{248}{table.caption.179}
+\contentsline {table}{\numberline {11.1}{\ignorespaces Pins available on RS485 and their usage\relax }}{233}{table.caption.159}%
+\contentsline {table}{\numberline {11.2}{\ignorespaces Operations supported by Modbus RTU\relax }}{234}{table.caption.161}%
+\contentsline {table}{\numberline {11.3}{\ignorespaces Individual parameter address in EM6400\relax }}{234}{table.caption.162}%
+\contentsline {table}{\numberline {11.4}{\ignorespaces A request packet to access V1 in EM6400\relax }}{235}{table.caption.164}%
+\contentsline {table}{\numberline {11.5}{\ignorespaces A response packet to access V1 in EM6400\relax }}{236}{table.caption.165}%
+\contentsline {table}{\numberline {11.6}{\ignorespaces Memory storage of a four-byte integer in little-endian and big-endian\relax }}{237}{table.caption.166}%
+\contentsline {table}{\numberline {11.7}{\ignorespaces Xcos parameters to read Energy Meter\relax }}{248}{table.caption.179}%
diff --git a/floss-arduino.pdf b/floss-arduino.pdf
index cc19abc..603c46d 100644
--- a/floss-arduino.pdf
+++ b/floss-arduino.pdf
diff --git a/floss-arduino.pyd b/floss-arduino.pyd
index fea3895..51cad57 100644
--- a/floss-arduino.pyd
+++ b/floss-arduino.pyd
@@ -1,31 +1,31 @@
 \addvspace {10pt}
-\contentsline {section}{\numberline {3.{1}}A Python script to check whether the firmware is properly installed or not}{46}{pymass.3.1}
+\contentsline {section}{\numberline {3.{1}}A Python script to check whether the firmware is properly installed or not}{46}{pymass.3.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{83}{pymass.4.1}
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{83}{pymass.4.2}
-\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{84}{pymass.4.3}
-\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{85}{pymass.4.4}
+\contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{83}{pymass.4.1}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{83}{pymass.4.2}%
+\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{84}{pymass.4.3}%
+\contentsline {section}{\numberline {4.{4}}Blinking the green LED}{85}{pymass.4.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Command Prompt or the Terminal}{106}{pymass.5.1}
-\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{107}{pymass.5.2}
+\contentsline {section}{\numberline {5.{1}}Read the status of the pushbutton and display it on the Command Prompt or the Terminal}{106}{pymass.5.1}%
+\contentsline {section}{\numberline {5.{2}}Turning the LED on or off depending on the pushbutton}{107}{pymass.5.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{127}{pymass.6.1}
-\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{128}{pymass.6.2}
+\contentsline {section}{\numberline {6.{1}}Read and display the LDR values}{127}{pymass.6.1}%
+\contentsline {section}{\numberline {6.{2}}Turning the red LED on and off}{128}{pymass.6.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{143}{pymass.7.1}
+\contentsline {section}{\numberline {7.{1}}Turning on LEDs depending on the potentiometer threshold}{143}{pymass.7.1}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{165}{pymass.8.1}
-\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{165}{pymass.8.2}
+\contentsline {section}{\numberline {8.{1}}Read and display the thermistor values}{165}{pymass.8.1}%
+\contentsline {section}{\numberline {8.{2}}Turning the buzzer on using thermistor values}{165}{pymass.8.2}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{189}{pymass.9.1}
-\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{190}{pymass.9.2}
-\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{191}{pymass.9.3}
-\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{192}{pymass.9.4}
+\contentsline {section}{\numberline {9.{1}}Rotating the servomotor to a specified degree}{189}{pymass.9.1}%
+\contentsline {section}{\numberline {9.{2}}Rotating the servomotor to a specified degree and reversing}{190}{pymass.9.2}%
+\contentsline {section}{\numberline {9.{3}}Rotating the servomotor in steps of $20^\circ $}{191}{pymass.9.3}%
+\contentsline {section}{\numberline {9.{4}}Rotating the servomotor to a degree specified by the potentiometer}{192}{pymass.9.4}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{219}{pymass.10.1}
-\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{220}{pymass.10.2}
-\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{221}{pymass.10.3}
+\contentsline {section}{\numberline {10.{1}}Rotating the DC motor}{219}{pymass.10.1}%
+\contentsline {section}{\numberline {10.{2}}Rotating the DC motor in both directions}{220}{pymass.10.2}%
+\contentsline {section}{\numberline {10.{3}}Rotating the DC motor in both directions in a loop}{221}{pymass.10.3}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{250}{pymass.11.1}
-\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{250}{pymass.11.2}
-\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{250}{pymass.11.3}
+\contentsline {section}{\numberline {11.{1}}Code for Single Phase Current Output}{250}{pymass.11.1}%
+\contentsline {section}{\numberline {11.{2}}Code for Single Phase Voltage Output}{250}{pymass.11.2}%
+\contentsline {section}{\numberline {11.{3}}Code for Single Phase Active Power Output}{250}{pymass.11.3}%
diff --git a/floss-arduino.tex b/floss-arduino.tex
index e2b93c3..e77b933 100644
--- a/floss-arduino.tex
+++ b/floss-arduino.tex
@@ -1,12 +1,12 @@
 \documentclass[a4paper,11pt]{book}
 
-\newcommand{\Home}
-{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone}
-\newcommand{\Origin}
-{/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone}
+% \newcommand{\Home}
+% {/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone}
+% \newcommand{\Origin}
+% {/Users/kannan/FOSS/scilab-arduino/floss-arduino-clone}
 
-%\newcommand{\Home}{/home/fossee/Desktop/floss-scilab-arduino}
-%\newcommand{\Origin}{/home/fossee/Desktop/floss-scilab-arduino}
+\newcommand{\Home}{/home/fossee/Desktop/floss-scilab-arduino}
+\newcommand{\Origin}{/home/fossee/Desktop/floss-scilab-arduino}
 
 \newcommand{\bluecolor}[1]{\color{blue}#1\color{black}}
 \usepackage{color}
diff --git a/floss-arduino.thm b/floss-arduino.thm
index dfd59c0..2a500f9 100644
--- a/floss-arduino.thm
+++ b/floss-arduino.thm
@@ -1,125 +1,125 @@
-\contentsline {ardmass}{{Arduino Code}{3.{1}}{}}{25}{ardmass.3.1}
-\contentsline {codemass}{{Scilab Code}{3.{1}}{}}{34}{codemass.3.1}
-\contentsline {pymass}{{Python Code}{3.{1}}{}}{46}{pymass.3.1}
-\contentsline {juliamass}{{Julia Code}{3.{1}}{}}{55}{juliamass.3.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{3.{1}}{}}{65}{OpenModelicamass.3.1}
-\contentsline {egmass}{{Exercise}{4.{1}}{}}{71}{egmass.4.1}
-\contentsline {ardmass}{{Arduino Code}{4.{1}}{}}{72}{ardmass.4.1}
-\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{72}{ardmass.4.2}
-\contentsline {ardmass}{{Arduino Code}{4.{3}}{}}{73}{ardmass.4.3}
-\contentsline {ardmass}{{Arduino Code}{4.{4}}{}}{73}{ardmass.4.4}
-\contentsline {egmass}{{Exercise}{4.{2}}{}}{75}{egmass.4.2}
-\contentsline {codemass}{{Scilab Code}{4.{1}}{}}{75}{codemass.4.1}
-\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{76}{codemass.4.2}
-\contentsline {codemass}{{Scilab Code}{4.{3}}{}}{76}{codemass.4.3}
-\contentsline {codemass}{{Scilab Code}{4.{4}}{}}{76}{codemass.4.4}
-\contentsline {egmass}{{Exercise}{4.{3}}{}}{80}{egmass.4.3}
-\contentsline {egmass}{{Exercise}{4.{4}}{}}{82}{egmass.4.4}
-\contentsline {pymass}{{Python Code}{4.{1}}{}}{83}{pymass.4.1}
-\contentsline {pymass}{{Python Code}{4.{2}}{}}{83}{pymass.4.2}
-\contentsline {pymass}{{Python Code}{4.{3}}{}}{84}{pymass.4.3}
-\contentsline {pymass}{{Python Code}{4.{4}}{}}{85}{pymass.4.4}
-\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{87}{juliamass.4.1}
-\contentsline {juliamass}{{Julia Code}{4.{2}}{}}{88}{juliamass.4.2}
-\contentsline {juliamass}{{Julia Code}{4.{3}}{}}{88}{juliamass.4.3}
-\contentsline {juliamass}{{Julia Code}{4.{4}}{}}{88}{juliamass.4.4}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{1}}{}}{91}{OpenModelicamass.4.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{2}}{}}{91}{OpenModelicamass.4.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{3}}{}}{92}{OpenModelicamass.4.3}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{4}}{}}{93}{OpenModelicamass.4.4}
-\contentsline {ardmass}{{Arduino Code}{5.{1}}{}}{99}{ardmass.5.1}
-\contentsline {ardmass}{{Arduino Code}{5.{2}}{}}{99}{ardmass.5.2}
-\contentsline {codemass}{{Scilab Code}{5.{1}}{}}{101}{codemass.5.1}
-\contentsline {codemass}{{Scilab Code}{5.{2}}{}}{102}{codemass.5.2}
-\contentsline {egmass}{{Exercise}{5.{1}}{}}{104}{egmass.5.1}
-\contentsline {pymass}{{Python Code}{5.{1}}{}}{106}{pymass.5.1}
-\contentsline {pymass}{{Python Code}{5.{2}}{}}{107}{pymass.5.2}
-\contentsline {juliamass}{{Julia Code}{5.{1}}{}}{109}{juliamass.5.1}
-\contentsline {juliamass}{{Julia Code}{5.{2}}{}}{109}{juliamass.5.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{1}}{}}{111}{OpenModelicamass.5.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{2}}{}}{112}{OpenModelicamass.5.2}
-\contentsline {egmass}{{Exercise}{6.{1}}{}}{119}{egmass.6.1}
-\contentsline {ardmass}{{Arduino Code}{6.{1}}{}}{120}{ardmass.6.1}
-\contentsline {ardmass}{{Arduino Code}{6.{2}}{}}{120}{ardmass.6.2}
-\contentsline {egmass}{{Exercise}{6.{2}}{}}{121}{egmass.6.2}
-\contentsline {codemass}{{Scilab Code}{6.{1}}{}}{122}{codemass.6.1}
-\contentsline {codemass}{{Scilab Code}{6.{2}}{}}{122}{codemass.6.2}
-\contentsline {egmass}{{Exercise}{6.{3}}{}}{127}{egmass.6.3}
-\contentsline {pymass}{{Python Code}{6.{1}}{}}{127}{pymass.6.1}
-\contentsline {pymass}{{Python Code}{6.{2}}{}}{128}{pymass.6.2}
-\contentsline {egmass}{{Exercise}{6.{4}}{}}{130}{egmass.6.4}
-\contentsline {juliamass}{{Julia Code}{6.{1}}{}}{130}{juliamass.6.1}
-\contentsline {juliamass}{{Julia Code}{6.{2}}{}}{131}{juliamass.6.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{1}}{}}{132}{OpenModelicamass.6.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{2}}{}}{133}{OpenModelicamass.6.2}
-\contentsline {ardmass}{{Arduino Code}{7.{1}}{}}{138}{ardmass.7.1}
-\contentsline {codemass}{{Scilab Code}{7.{1}}{}}{140}{codemass.7.1}
-\contentsline {egmass}{{Exercise}{7.{1}}{}}{142}{egmass.7.1}
-\contentsline {pymass}{{Python Code}{7.{1}}{}}{143}{pymass.7.1}
-\contentsline {juliamass}{{Julia Code}{7.{1}}{}}{145}{juliamass.7.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{7.{1}}{}}{147}{OpenModelicamass.7.1}
-\contentsline {egmass}{{Exercise}{8.{1}}{}}{154}{egmass.8.1}
-\contentsline {ardmass}{{Arduino Code}{8.{1}}{}}{154}{ardmass.8.1}
-\contentsline {ardmass}{{Arduino Code}{8.{2}}{}}{155}{ardmass.8.2}
-\contentsline {egmass}{{Exercise}{8.{2}}{}}{157}{egmass.8.2}
-\contentsline {codemass}{{Scilab Code}{8.{1}}{}}{158}{codemass.8.1}
-\contentsline {codemass}{{Scilab Code}{8.{2}}{}}{158}{codemass.8.2}
-\contentsline {pymass}{{Python Code}{8.{1}}{}}{165}{pymass.8.1}
-\contentsline {pymass}{{Python Code}{8.{2}}{}}{165}{pymass.8.2}
-\contentsline {juliamass}{{Julia Code}{8.{1}}{}}{168}{juliamass.8.1}
-\contentsline {juliamass}{{Julia Code}{8.{2}}{}}{169}{juliamass.8.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{1}}{}}{171}{OpenModelicamass.8.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{2}}{}}{172}{OpenModelicamass.8.2}
-\contentsline {egmass}{{Exercise}{9.{1}}{}}{178}{egmass.9.1}
-\contentsline {ardmass}{{Arduino Code}{9.{1}}{}}{178}{ardmass.9.1}
-\contentsline {ardmass}{{Arduino Code}{9.{2}}{}}{179}{ardmass.9.2}
-\contentsline {ardmass}{{Arduino Code}{9.{3}}{}}{179}{ardmass.9.3}
-\contentsline {ardmass}{{Arduino Code}{9.{4}}{}}{179}{ardmass.9.4}
-\contentsline {codemass}{{Scilab Code}{9.{1}}{}}{182}{codemass.9.1}
-\contentsline {codemass}{{Scilab Code}{9.{2}}{}}{182}{codemass.9.2}
-\contentsline {codemass}{{Scilab Code}{9.{3}}{}}{182}{codemass.9.3}
-\contentsline {codemass}{{Scilab Code}{9.{4}}{}}{183}{codemass.9.4}
-\contentsline {pymass}{{Python Code}{9.{1}}{}}{189}{pymass.9.1}
-\contentsline {pymass}{{Python Code}{9.{2}}{}}{190}{pymass.9.2}
-\contentsline {pymass}{{Python Code}{9.{3}}{}}{191}{pymass.9.3}
-\contentsline {pymass}{{Python Code}{9.{4}}{}}{192}{pymass.9.4}
-\contentsline {juliamass}{{Julia Code}{9.{1}}{}}{195}{juliamass.9.1}
-\contentsline {juliamass}{{Julia Code}{9.{2}}{}}{195}{juliamass.9.2}
-\contentsline {juliamass}{{Julia Code}{9.{3}}{}}{195}{juliamass.9.3}
-\contentsline {juliamass}{{Julia Code}{9.{4}}{}}{196}{juliamass.9.4}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{1}}{}}{198}{OpenModelicamass.9.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{2}}{}}{199}{OpenModelicamass.9.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{3}}{}}{199}{OpenModelicamass.9.3}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{4}}{}}{200}{OpenModelicamass.9.4}
-\contentsline {egmass}{{Exercise}{10.{1}}{}}{208}{egmass.10.1}
-\contentsline {ardmass}{{Arduino Code}{10.{1}}{}}{208}{ardmass.10.1}
-\contentsline {ardmass}{{Arduino Code}{10.{2}}{}}{208}{ardmass.10.2}
-\contentsline {ardmass}{{Arduino Code}{10.{3}}{}}{209}{ardmass.10.3}
-\contentsline {egmass}{{Exercise}{10.{2}}{}}{212}{egmass.10.2}
-\contentsline {codemass}{{Scilab Code}{10.{1}}{}}{212}{codemass.10.1}
-\contentsline {codemass}{{Scilab Code}{10.{2}}{}}{212}{codemass.10.2}
-\contentsline {codemass}{{Scilab Code}{10.{3}}{}}{213}{codemass.10.3}
-\contentsline {egmass}{{Exercise}{10.{3}}{}}{216}{egmass.10.3}
-\contentsline {pymass}{{Python Code}{10.{1}}{}}{219}{pymass.10.1}
-\contentsline {pymass}{{Python Code}{10.{2}}{}}{220}{pymass.10.2}
-\contentsline {pymass}{{Python Code}{10.{3}}{}}{221}{pymass.10.3}
-\contentsline {juliamass}{{Julia Code}{10.{1}}{}}{225}{juliamass.10.1}
-\contentsline {juliamass}{{Julia Code}{10.{2}}{}}{225}{juliamass.10.2}
-\contentsline {juliamass}{{Julia Code}{10.{3}}{}}{225}{juliamass.10.3}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{1}}{}}{228}{OpenModelicamass.10.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{2}}{}}{229}{OpenModelicamass.10.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{3}}{}}{229}{OpenModelicamass.10.3}
-\contentsline {ardmass}{{Arduino Code}{11.{1}}{}}{241}{ardmass.11.1}
-\contentsline {codemass}{{Scilab Code}{11.{1}}{}}{243}{codemass.11.1}
-\contentsline {codemass}{{Scilab Code}{11.{2}}{}}{243}{codemass.11.2}
-\contentsline {codemass}{{Scilab Code}{11.{3}}{}}{243}{codemass.11.3}
-\contentsline {codemass}{{Scilab Code}{11.{4}}{}}{244}{codemass.11.4}
-\contentsline {pymass}{{Python Code}{11.{1}}{}}{250}{pymass.11.1}
-\contentsline {pymass}{{Python Code}{11.{2}}{}}{250}{pymass.11.2}
-\contentsline {pymass}{{Python Code}{11.{3}}{}}{250}{pymass.11.3}
-\contentsline {juliamass}{{Julia Code}{11.{1}}{}}{251}{juliamass.11.1}
-\contentsline {juliamass}{{Julia Code}{11.{2}}{}}{252}{juliamass.11.2}
-\contentsline {juliamass}{{Julia Code}{11.{3}}{}}{252}{juliamass.11.3}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{1}}{}}{254}{OpenModelicamass.11.1}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{2}}{}}{254}{OpenModelicamass.11.2}
-\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{3}}{}}{254}{OpenModelicamass.11.3}
+\contentsline {ardmass}{{Arduino Code}{3.{1}}{}}{25}{ardmass.3.1}%
+\contentsline {codemass}{{Scilab Code}{3.{1}}{}}{34}{codemass.3.1}%
+\contentsline {pymass}{{Python Code}{3.{1}}{}}{46}{pymass.3.1}%
+\contentsline {juliamass}{{Julia Code}{3.{1}}{}}{55}{juliamass.3.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{3.{1}}{}}{65}{OpenModelicamass.3.1}%
+\contentsline {egmass}{{Exercise}{4.{1}}{}}{71}{egmass.4.1}%
+\contentsline {ardmass}{{Arduino Code}{4.{1}}{}}{72}{ardmass.4.1}%
+\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{72}{ardmass.4.2}%
+\contentsline {ardmass}{{Arduino Code}{4.{3}}{}}{73}{ardmass.4.3}%
+\contentsline {ardmass}{{Arduino Code}{4.{4}}{}}{73}{ardmass.4.4}%
+\contentsline {egmass}{{Exercise}{4.{2}}{}}{75}{egmass.4.2}%
+\contentsline {codemass}{{Scilab Code}{4.{1}}{}}{75}{codemass.4.1}%
+\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{76}{codemass.4.2}%
+\contentsline {codemass}{{Scilab Code}{4.{3}}{}}{76}{codemass.4.3}%
+\contentsline {codemass}{{Scilab Code}{4.{4}}{}}{76}{codemass.4.4}%
+\contentsline {egmass}{{Exercise}{4.{3}}{}}{80}{egmass.4.3}%
+\contentsline {egmass}{{Exercise}{4.{4}}{}}{82}{egmass.4.4}%
+\contentsline {pymass}{{Python Code}{4.{1}}{}}{83}{pymass.4.1}%
+\contentsline {pymass}{{Python Code}{4.{2}}{}}{83}{pymass.4.2}%
+\contentsline {pymass}{{Python Code}{4.{3}}{}}{84}{pymass.4.3}%
+\contentsline {pymass}{{Python Code}{4.{4}}{}}{85}{pymass.4.4}%
+\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{87}{juliamass.4.1}%
+\contentsline {juliamass}{{Julia Code}{4.{2}}{}}{88}{juliamass.4.2}%
+\contentsline {juliamass}{{Julia Code}{4.{3}}{}}{88}{juliamass.4.3}%
+\contentsline {juliamass}{{Julia Code}{4.{4}}{}}{88}{juliamass.4.4}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{1}}{}}{91}{OpenModelicamass.4.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{2}}{}}{91}{OpenModelicamass.4.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{3}}{}}{92}{OpenModelicamass.4.3}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{4.{4}}{}}{93}{OpenModelicamass.4.4}%
+\contentsline {ardmass}{{Arduino Code}{5.{1}}{}}{99}{ardmass.5.1}%
+\contentsline {ardmass}{{Arduino Code}{5.{2}}{}}{99}{ardmass.5.2}%
+\contentsline {codemass}{{Scilab Code}{5.{1}}{}}{101}{codemass.5.1}%
+\contentsline {codemass}{{Scilab Code}{5.{2}}{}}{102}{codemass.5.2}%
+\contentsline {egmass}{{Exercise}{5.{1}}{}}{104}{egmass.5.1}%
+\contentsline {pymass}{{Python Code}{5.{1}}{}}{106}{pymass.5.1}%
+\contentsline {pymass}{{Python Code}{5.{2}}{}}{107}{pymass.5.2}%
+\contentsline {juliamass}{{Julia Code}{5.{1}}{}}{109}{juliamass.5.1}%
+\contentsline {juliamass}{{Julia Code}{5.{2}}{}}{109}{juliamass.5.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{1}}{}}{111}{OpenModelicamass.5.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{5.{2}}{}}{112}{OpenModelicamass.5.2}%
+\contentsline {egmass}{{Exercise}{6.{1}}{}}{119}{egmass.6.1}%
+\contentsline {ardmass}{{Arduino Code}{6.{1}}{}}{120}{ardmass.6.1}%
+\contentsline {ardmass}{{Arduino Code}{6.{2}}{}}{120}{ardmass.6.2}%
+\contentsline {egmass}{{Exercise}{6.{2}}{}}{121}{egmass.6.2}%
+\contentsline {codemass}{{Scilab Code}{6.{1}}{}}{122}{codemass.6.1}%
+\contentsline {codemass}{{Scilab Code}{6.{2}}{}}{122}{codemass.6.2}%
+\contentsline {egmass}{{Exercise}{6.{3}}{}}{127}{egmass.6.3}%
+\contentsline {pymass}{{Python Code}{6.{1}}{}}{127}{pymass.6.1}%
+\contentsline {pymass}{{Python Code}{6.{2}}{}}{128}{pymass.6.2}%
+\contentsline {egmass}{{Exercise}{6.{4}}{}}{130}{egmass.6.4}%
+\contentsline {juliamass}{{Julia Code}{6.{1}}{}}{130}{juliamass.6.1}%
+\contentsline {juliamass}{{Julia Code}{6.{2}}{}}{131}{juliamass.6.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{1}}{}}{132}{OpenModelicamass.6.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{6.{2}}{}}{133}{OpenModelicamass.6.2}%
+\contentsline {ardmass}{{Arduino Code}{7.{1}}{}}{138}{ardmass.7.1}%
+\contentsline {codemass}{{Scilab Code}{7.{1}}{}}{140}{codemass.7.1}%
+\contentsline {egmass}{{Exercise}{7.{1}}{}}{142}{egmass.7.1}%
+\contentsline {pymass}{{Python Code}{7.{1}}{}}{143}{pymass.7.1}%
+\contentsline {juliamass}{{Julia Code}{7.{1}}{}}{145}{juliamass.7.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{7.{1}}{}}{147}{OpenModelicamass.7.1}%
+\contentsline {egmass}{{Exercise}{8.{1}}{}}{154}{egmass.8.1}%
+\contentsline {ardmass}{{Arduino Code}{8.{1}}{}}{154}{ardmass.8.1}%
+\contentsline {ardmass}{{Arduino Code}{8.{2}}{}}{155}{ardmass.8.2}%
+\contentsline {egmass}{{Exercise}{8.{2}}{}}{157}{egmass.8.2}%
+\contentsline {codemass}{{Scilab Code}{8.{1}}{}}{158}{codemass.8.1}%
+\contentsline {codemass}{{Scilab Code}{8.{2}}{}}{158}{codemass.8.2}%
+\contentsline {pymass}{{Python Code}{8.{1}}{}}{165}{pymass.8.1}%
+\contentsline {pymass}{{Python Code}{8.{2}}{}}{165}{pymass.8.2}%
+\contentsline {juliamass}{{Julia Code}{8.{1}}{}}{168}{juliamass.8.1}%
+\contentsline {juliamass}{{Julia Code}{8.{2}}{}}{169}{juliamass.8.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{1}}{}}{171}{OpenModelicamass.8.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{8.{2}}{}}{172}{OpenModelicamass.8.2}%
+\contentsline {egmass}{{Exercise}{9.{1}}{}}{178}{egmass.9.1}%
+\contentsline {ardmass}{{Arduino Code}{9.{1}}{}}{178}{ardmass.9.1}%
+\contentsline {ardmass}{{Arduino Code}{9.{2}}{}}{179}{ardmass.9.2}%
+\contentsline {ardmass}{{Arduino Code}{9.{3}}{}}{179}{ardmass.9.3}%
+\contentsline {ardmass}{{Arduino Code}{9.{4}}{}}{179}{ardmass.9.4}%
+\contentsline {codemass}{{Scilab Code}{9.{1}}{}}{182}{codemass.9.1}%
+\contentsline {codemass}{{Scilab Code}{9.{2}}{}}{182}{codemass.9.2}%
+\contentsline {codemass}{{Scilab Code}{9.{3}}{}}{182}{codemass.9.3}%
+\contentsline {codemass}{{Scilab Code}{9.{4}}{}}{183}{codemass.9.4}%
+\contentsline {pymass}{{Python Code}{9.{1}}{}}{189}{pymass.9.1}%
+\contentsline {pymass}{{Python Code}{9.{2}}{}}{190}{pymass.9.2}%
+\contentsline {pymass}{{Python Code}{9.{3}}{}}{191}{pymass.9.3}%
+\contentsline {pymass}{{Python Code}{9.{4}}{}}{192}{pymass.9.4}%
+\contentsline {juliamass}{{Julia Code}{9.{1}}{}}{195}{juliamass.9.1}%
+\contentsline {juliamass}{{Julia Code}{9.{2}}{}}{195}{juliamass.9.2}%
+\contentsline {juliamass}{{Julia Code}{9.{3}}{}}{195}{juliamass.9.3}%
+\contentsline {juliamass}{{Julia Code}{9.{4}}{}}{196}{juliamass.9.4}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{1}}{}}{198}{OpenModelicamass.9.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{2}}{}}{199}{OpenModelicamass.9.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{3}}{}}{199}{OpenModelicamass.9.3}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{9.{4}}{}}{200}{OpenModelicamass.9.4}%
+\contentsline {egmass}{{Exercise}{10.{1}}{}}{208}{egmass.10.1}%
+\contentsline {ardmass}{{Arduino Code}{10.{1}}{}}{208}{ardmass.10.1}%
+\contentsline {ardmass}{{Arduino Code}{10.{2}}{}}{208}{ardmass.10.2}%
+\contentsline {ardmass}{{Arduino Code}{10.{3}}{}}{209}{ardmass.10.3}%
+\contentsline {egmass}{{Exercise}{10.{2}}{}}{212}{egmass.10.2}%
+\contentsline {codemass}{{Scilab Code}{10.{1}}{}}{212}{codemass.10.1}%
+\contentsline {codemass}{{Scilab Code}{10.{2}}{}}{212}{codemass.10.2}%
+\contentsline {codemass}{{Scilab Code}{10.{3}}{}}{213}{codemass.10.3}%
+\contentsline {egmass}{{Exercise}{10.{3}}{}}{216}{egmass.10.3}%
+\contentsline {pymass}{{Python Code}{10.{1}}{}}{219}{pymass.10.1}%
+\contentsline {pymass}{{Python Code}{10.{2}}{}}{220}{pymass.10.2}%
+\contentsline {pymass}{{Python Code}{10.{3}}{}}{221}{pymass.10.3}%
+\contentsline {juliamass}{{Julia Code}{10.{1}}{}}{225}{juliamass.10.1}%
+\contentsline {juliamass}{{Julia Code}{10.{2}}{}}{225}{juliamass.10.2}%
+\contentsline {juliamass}{{Julia Code}{10.{3}}{}}{225}{juliamass.10.3}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{1}}{}}{228}{OpenModelicamass.10.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{2}}{}}{229}{OpenModelicamass.10.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{10.{3}}{}}{229}{OpenModelicamass.10.3}%
+\contentsline {ardmass}{{Arduino Code}{11.{1}}{}}{241}{ardmass.11.1}%
+\contentsline {codemass}{{Scilab Code}{11.{1}}{}}{243}{codemass.11.1}%
+\contentsline {codemass}{{Scilab Code}{11.{2}}{}}{243}{codemass.11.2}%
+\contentsline {codemass}{{Scilab Code}{11.{3}}{}}{243}{codemass.11.3}%
+\contentsline {codemass}{{Scilab Code}{11.{4}}{}}{244}{codemass.11.4}%
+\contentsline {pymass}{{Python Code}{11.{1}}{}}{250}{pymass.11.1}%
+\contentsline {pymass}{{Python Code}{11.{2}}{}}{250}{pymass.11.2}%
+\contentsline {pymass}{{Python Code}{11.{3}}{}}{250}{pymass.11.3}%
+\contentsline {juliamass}{{Julia Code}{11.{1}}{}}{251}{juliamass.11.1}%
+\contentsline {juliamass}{{Julia Code}{11.{2}}{}}{252}{juliamass.11.2}%
+\contentsline {juliamass}{{Julia Code}{11.{3}}{}}{252}{juliamass.11.3}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{1}}{}}{254}{OpenModelicamass.11.1}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{2}}{}}{254}{OpenModelicamass.11.2}%
+\contentsline {OpenModelicamass}{{OpenModelica Code}{11.{3}}{}}{254}{OpenModelicamass.11.3}%
diff --git a/floss-arduino.toc b/floss-arduino.toc
index 5437445..1cfa977 100644
--- a/floss-arduino.toc
+++ b/floss-arduino.toc
@@ -1,238 +1,238 @@
-\contentsline {chapter}{\numberline {List of Figures}}{ix}{chapter*.2}
-\contentsline {chapter}{\numberline {List of Tables}}{xiii}{chapter*.3}
-\contentsline {chapter}{\numberline {List of Arduino \ Code}}{xv}{chapter*.4}
-\contentsline {chapter}{\numberline {List of Scilab Code}}{xvii}{chapter*.5}
-\contentsline {chapter}{\numberline {List of Python \ Code}}{xix}{chapter*.6}
-\contentsline {chapter}{\numberline {List of Julia\ Code}}{xxi}{chapter*.7}
-\contentsline {chapter}{\numberline {List of OpenModelica\ Code}}{xxiii}{chapter*.8}
+\contentsline {chapter}{\numberline {List of Figures}}{ix}{chapter*.2}%
+\contentsline {chapter}{\numberline {List of Tables}}{xiii}{chapter*.3}%
+\contentsline {chapter}{\numberline {List of Arduino \ Code}}{xv}{chapter*.4}%
+\contentsline {chapter}{\numberline {List of Scilab Code}}{xvii}{chapter*.5}%
+\contentsline {chapter}{\numberline {List of Python \ Code}}{xix}{chapter*.6}%
+\contentsline {chapter}{\numberline {List of Julia\ Code}}{xxi}{chapter*.7}%
+\contentsline {chapter}{\numberline {List of OpenModelica\ Code}}{xxiii}{chapter*.8}%
 \thispagestyle {empty}
-\contentsline {chapter}{\numberline {List of Acronyms}}{xxv}{chapter*.9}
-\contentsline {chapter}{\numberline {1}Introduction}{1}{chapter.1}
-\contentsline {chapter}{\numberline {2}Hardware Environment}{3}{chapter.2}
-\contentsline {section}{\numberline {2.1}Microcontroller}{3}{section.2.1}
-\contentsline {subsection}{\numberline {2.1.1}Organization of a Microcontroller}{3}{subsection.2.1.1}
-\contentsline {subsection}{\numberline {2.1.2}Microcontroller Peripherals}{5}{subsection.2.1.2}
-\contentsline {section}{\numberline {2.2}Open Source Hardware (OSHW)}{7}{section.2.2}
-\contentsline {section}{\numberline {2.3}Arduino}{8}{section.2.3}
-\contentsline {subsection}{\numberline {2.3.1}Brief History}{8}{subsection.2.3.1}
-\contentsline {subsection}{\numberline {2.3.2}Arduino Uno Board}{9}{subsection.2.3.2}
-\contentsline {subsection}{\numberline {2.3.3}Popular Arduino Projects}{9}{subsection.2.3.3}
-\contentsline {paragraph}{Arduino phone:}{10}{section*.17}
-\contentsline {paragraph}{Candy sorting machine:}{11}{section*.19}
-\contentsline {paragraph}{3D printers:}{11}{section*.20}
-\contentsline {section}{\numberline {2.4}Shield}{11}{section.2.4}
-\contentsline {section}{\numberline {2.5}Experimental Test Bed}{12}{section.2.5}
-\contentsline {chapter}{\numberline {3}Communication between Software and Arduino}{17}{chapter.3}
-\contentsline {section}{\numberline {3.1}Arduino IDE}{17}{section.3.1}
-\contentsline {subsection}{\numberline {3.1.1}Downloading and installing on Windows}{18}{subsection.3.1.1}
-\contentsline {subsection}{\numberline {3.1.2}Downloading and installing on GNU/Linux Ubuntu}{19}{subsection.3.1.2}
-\contentsline {subsection}{\numberline {3.1.3}Arduino Development Environment}{21}{subsection.3.1.3}
-\contentsline {subsection}{\numberline {3.1.4}Testing Arduino with a sample program}{24}{subsection.3.1.4}
-\contentsline {subsection}{\numberline {3.1.5}FLOSS Firmware}{25}{subsection.3.1.5}
-\contentsline {section}{\numberline {3.2}Scilab}{25}{section.3.2}
-\contentsline {subsection}{\numberline {3.2.1}Downloading and installing on Windows}{26}{subsection.3.2.1}
-\contentsline {subsection}{\numberline {3.2.2}Downloading and installing on GNU/Linux Ubuntu}{26}{subsection.3.2.2}
-\contentsline {subsection}{\numberline {3.2.3}Scilab-Arduino toolbox}{27}{subsection.3.2.3}
-\contentsline {subsection}{\numberline {3.2.4}Identifying Arduino communication port number}{29}{subsection.3.2.4}
-\contentsline {subsection}{\numberline {3.2.5}Testing Scilab-Arduino toolbox}{31}{subsection.3.2.5}
-\contentsline {subsection}{\numberline {3.2.6}Firmware}{33}{subsection.3.2.6}
-\contentsline {section}{\numberline {3.3}Xcos}{35}{section.3.3}
-\contentsline {subsection}{\numberline {3.3.1}Downloading, installing and testing}{35}{subsection.3.3.1}
-\contentsline {subsection}{\numberline {3.3.2}Use case}{36}{subsection.3.3.2}
-\contentsline {subsection}{\numberline {3.3.3}Xcos-Arduino}{40}{subsection.3.3.3}
-\contentsline {section}{\numberline {3.4}Python}{41}{section.3.4}
-\contentsline {subsection}{\numberline {3.4.1}Downloading and installing on Windows}{41}{subsection.3.4.1}
-\contentsline {subsection}{\numberline {3.4.2}Downloading and installing on GNU/Linux Ubuntu}{44}{subsection.3.4.2}
-\contentsline {subsection}{\numberline {3.4.3}Python-Arduino toolbox}{45}{subsection.3.4.3}
-\contentsline {subsection}{\numberline {3.4.4}Firmware}{46}{subsection.3.4.4}
-\contentsline {section}{\numberline {3.5}Julia}{47}{section.3.5}
-\contentsline {subsection}{\numberline {3.5.1}Downloading and installing on Windows}{47}{subsection.3.5.1}
-\contentsline {subsection}{\numberline {3.5.2}Downloading and installing GNU/Linux Ubuntu}{51}{subsection.3.5.2}
-\contentsline {subsection}{\numberline {3.5.3}Julia-Arduino toolbox}{55}{subsection.3.5.3}
-\contentsline {subsection}{\numberline {3.5.4}Firmware}{55}{subsection.3.5.4}
-\contentsline {section}{\numberline {3.6}OpenModelica}{56}{section.3.6}
-\contentsline {subsection}{\numberline {3.6.1}Downloading and installing on Windows}{56}{subsection.3.6.1}
-\contentsline {subsection}{\numberline {3.6.2}Downloading and installing on GNU/Linux Ubuntu}{58}{subsection.3.6.2}
-\contentsline {subsection}{\numberline {3.6.3}Simulating models in OpenModelica}{59}{subsection.3.6.3}
-\contentsline {subsection}{\numberline {3.6.4}OpenModelica-Arduino toolbox}{61}{subsection.3.6.4}
-\contentsline {subsection}{\numberline {3.6.5}Firmware}{65}{subsection.3.6.5}
-\contentsline {chapter}{\numberline {4}Interfacing a Light Emitting Diode}{67}{chapter.4}
-\contentsline {section}{\numberline {4.1}Preliminaries}{67}{section.4.1}
-\contentsline {section}{\numberline {4.2}Connecting an RGB LED with Arduino Uno\ using a breadboard}{69}{section.4.2}
-\contentsline {section}{\numberline {4.3}Lighting the LED from the Arduino IDE}{70}{section.4.3}
-\contentsline {subsection}{\numberline {4.3.1}Lighting the LED}{70}{subsection.4.3.1}
-\contentsline {paragraph}{Note:}{71}{section*.76}
-\contentsline {paragraph}{Note:}{71}{section*.78}
-\contentsline {subsection}{\numberline {4.3.2}Arduino Code}{72}{subsection.4.3.2}
-\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{74}{section.4.4}
-\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{74}{subsection.4.4.1}
-\contentsline {subsection}{\numberline {4.4.2}Scilab Code}{75}{subsection.4.4.2}
-\contentsline {section}{\numberline {4.5}Lighting the LED from Scilab Xcos}{76}{section.4.5}
-\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{81}{section.4.6}
-\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{81}{subsection.4.6.1}
-\contentsline {subsection}{\numberline {4.6.2}Python Code}{83}{subsection.4.6.2}
-\contentsline {section}{\numberline {4.7}Lighting the LED from Julia}{86}{section.4.7}
-\contentsline {subsection}{\numberline {4.7.1}Lighting the LED}{86}{subsection.4.7.1}
-\contentsline {subsection}{\numberline {4.7.2}Julia Code}{87}{subsection.4.7.2}
-\contentsline {section}{\numberline {4.8}Lighting the LED from OpenModelica}{89}{section.4.8}
-\contentsline {subsection}{\numberline {4.8.1}Lighting the LED}{89}{subsection.4.8.1}
-\contentsline {subsection}{\numberline {4.8.2}OpenModelica Code}{90}{subsection.4.8.2}
-\contentsline {chapter}{\numberline {5}Interfacing a Pushbutton}{95}{chapter.5}
-\contentsline {section}{\numberline {5.1}Preliminaries}{95}{section.5.1}
-\contentsline {section}{\numberline {5.2}Connecting a pushbutton with Arduino Uno\ using a breadboard}{95}{section.5.2}
-\contentsline {section}{\numberline {5.3}Reading the pushbutton status from the Arduino IDE}{98}{section.5.3}
-\contentsline {subsection}{\numberline {5.3.1}Reading the pushbutton status}{98}{subsection.5.3.1}
-\contentsline {subsection}{\numberline {5.3.2}Arduino Code}{99}{subsection.5.3.2}
-\contentsline {section}{\numberline {5.4}Reading the pushbutton Status from Scilab}{100}{section.5.4}
-\contentsline {subsection}{\numberline {5.4.1}Reading the pushbutton Status}{100}{subsection.5.4.1}
-\contentsline {subsection}{\numberline {5.4.2}Scilab Code}{101}{subsection.5.4.2}
-\contentsline {section}{\numberline {5.5}Accessing the pushbutton from Xcos}{102}{section.5.5}
-\contentsline {section}{\numberline {5.6}Reading the pushbutton status from Python}{105}{section.5.6}
-\contentsline {subsection}{\numberline {5.6.1}Reading the pushbutton status}{105}{subsection.5.6.1}
-\contentsline {subsection}{\numberline {5.6.2}Python Code}{106}{subsection.5.6.2}
-\contentsline {section}{\numberline {5.7}Reading the pushbutton status from Julia}{108}{section.5.7}
-\contentsline {subsection}{\numberline {5.7.1}Reading the pushbutton status}{108}{subsection.5.7.1}
-\contentsline {subsection}{\numberline {5.7.2}Julia Code}{109}{subsection.5.7.2}
-\contentsline {section}{\numberline {5.8}Reading the pushbutton status from OpenModelica}{110}{section.5.8}
-\contentsline {subsection}{\numberline {5.8.1}Reading the pushbutton status}{110}{subsection.5.8.1}
-\contentsline {subsection}{\numberline {5.8.2}OpenModelica Code}{111}{subsection.5.8.2}
-\contentsline {chapter}{\numberline {6}Interfacing a Light Dependent Resistor}{115}{chapter.6}
-\contentsline {section}{\numberline {6.1}Preliminaries}{115}{section.6.1}
-\contentsline {section}{\numberline {6.2}Connecting an LDR with Arduino Uno\ using a breadboard}{117}{section.6.2}
-\contentsline {section}{\numberline {6.3}Interfacing the LDR through the Arduino IDE}{118}{section.6.3}
-\contentsline {subsection}{\numberline {6.3.1}Interfacing the LDR}{118}{subsection.6.3.1}
-\contentsline {subsection}{\numberline {6.3.2}Arduino Code}{120}{subsection.6.3.2}
-\contentsline {section}{\numberline {6.4}Interfacing the LDR through Scilab}{120}{section.6.4}
-\contentsline {subsection}{\numberline {6.4.1}Interfacing the LDR}{120}{subsection.6.4.1}
-\contentsline {subsection}{\numberline {6.4.2}Scilab Code}{122}{subsection.6.4.2}
-\contentsline {section}{\numberline {6.5}Interfacing the LDR through Xcos}{122}{section.6.5}
-\contentsline {section}{\numberline {6.6}Interfacing the LDR through Python}{126}{section.6.6}
-\contentsline {subsection}{\numberline {6.6.1}Interfacing the LDR}{126}{subsection.6.6.1}
-\contentsline {subsection}{\numberline {6.6.2}Python Code}{127}{subsection.6.6.2}
-\contentsline {section}{\numberline {6.7}Interfacing the LDR through Julia}{129}{section.6.7}
-\contentsline {subsection}{\numberline {6.7.1}Interfacing the LDR}{129}{subsection.6.7.1}
-\contentsline {subsection}{\numberline {6.7.2}Julia Code}{130}{subsection.6.7.2}
-\contentsline {section}{\numberline {6.8}Interfacing the LDR through OpenModelica}{131}{section.6.8}
-\contentsline {subsection}{\numberline {6.8.1}Interfacing the LDR}{131}{subsection.6.8.1}
-\contentsline {subsection}{\numberline {6.8.2}OpenModelica Code}{132}{subsection.6.8.2}
-\contentsline {chapter}{\numberline {7}Interfacing a Potentiometer}{135}{chapter.7}
-\contentsline {section}{\numberline {7.1}Preliminaries}{135}{section.7.1}
-\contentsline {section}{\numberline {7.2}Connecting a potentiometer with Arduino Uno\ using a breadboard}{136}{section.7.2}
-\contentsline {section}{\numberline {7.3}Reading the potentiometer from the Arduino IDE}{137}{section.7.3}
-\contentsline {subsection}{\numberline {7.3.1}Reading the potentiometer}{137}{subsection.7.3.1}
-\contentsline {subsection}{\numberline {7.3.2}Arduino Code}{138}{subsection.7.3.2}
-\contentsline {section}{\numberline {7.4}Reading the potentiometer from Scilab}{139}{section.7.4}
-\contentsline {subsection}{\numberline {7.4.1}Reading the potentiometer}{139}{subsection.7.4.1}
-\contentsline {subsection}{\numberline {7.4.2}Scilab Code}{140}{subsection.7.4.2}
-\contentsline {section}{\numberline {7.5}Reading the potentiometer from Xcos}{141}{section.7.5}
-\contentsline {section}{\numberline {7.6}Reading the potentiometer from Python}{143}{section.7.6}
-\contentsline {subsection}{\numberline {7.6.1}Reading the potentiometer}{143}{subsection.7.6.1}
-\contentsline {subsection}{\numberline {7.6.2}Python Code}{143}{subsection.7.6.2}
-\contentsline {section}{\numberline {7.7}Reading the potentiometer from Julia}{145}{section.7.7}
-\contentsline {subsection}{\numberline {7.7.1}Reading the potentiometer}{145}{subsection.7.7.1}
-\contentsline {subsection}{\numberline {7.7.2}Julia Code}{145}{subsection.7.7.2}
-\contentsline {section}{\numberline {7.8}Reading the potentiometer from OpenModelica}{146}{section.7.8}
-\contentsline {subsection}{\numberline {7.8.1}Reading the potentiometer}{146}{subsection.7.8.1}
-\contentsline {subsection}{\numberline {7.8.2}OpenModelica Code}{147}{subsection.7.8.2}
-\contentsline {chapter}{\numberline {8}Interfacing a Thermistor}{149}{chapter.8}
-\contentsline {section}{\numberline {8.1}Preliminaries}{149}{section.8.1}
-\contentsline {section}{\numberline {8.2}Connecting a thermistor with Arduino Uno\ using a breadboard}{151}{section.8.2}
-\contentsline {section}{\numberline {8.3}Interfacing the thermistor from the Arduino IDE}{152}{section.8.3}
-\contentsline {subsection}{\numberline {8.3.1}Interfacing the thermistor}{152}{subsection.8.3.1}
-\contentsline {paragraph}{Note:}{154}{section*.113}
-\contentsline {subsection}{\numberline {8.3.2}Arduino Code}{154}{subsection.8.3.2}
-\contentsline {section}{\numberline {8.4}Interfacing the thermistor from Scilab}{156}{section.8.4}
-\contentsline {subsection}{\numberline {8.4.1}Interfacing the thermistor}{156}{subsection.8.4.1}
-\contentsline {paragraph}{Note:}{157}{section*.114}
-\contentsline {subsection}{\numberline {8.4.2}Scilab Code}{158}{subsection.8.4.2}
-\contentsline {section}{\numberline {8.5}Interfacing the thermistor from Xcos}{159}{section.8.5}
-\contentsline {paragraph}{Note:}{162}{section*.121}
-\contentsline {section}{\numberline {8.6}Interfacing the thermistor from Python}{162}{section.8.6}
-\contentsline {subsection}{\numberline {8.6.1}Interfacing the thermistor}{162}{subsection.8.6.1}
-\contentsline {paragraph}{Note:}{164}{section*.122}
-\contentsline {subsection}{\numberline {8.6.2}Python Code}{165}{subsection.8.6.2}
-\contentsline {section}{\numberline {8.7}Interfacing the thermistor from Julia}{167}{section.8.7}
-\contentsline {subsection}{\numberline {8.7.1}Interfacing the thermistor}{167}{subsection.8.7.1}
-\contentsline {paragraph}{Note:}{168}{section*.123}
-\contentsline {subsection}{\numberline {8.7.2}Julia Code}{168}{subsection.8.7.2}
-\contentsline {section}{\numberline {8.8}Interfacing the thermistor from OpenModelica}{169}{section.8.8}
-\contentsline {subsection}{\numberline {8.8.1}Interfacing the thermistor}{169}{subsection.8.8.1}
-\contentsline {paragraph}{Note:}{171}{section*.124}
-\contentsline {subsection}{\numberline {8.8.2}OpenModelica Code}{171}{subsection.8.8.2}
-\contentsline {chapter}{\numberline {9}Interfacing a Servomotor}{173}{chapter.9}
-\contentsline {section}{\numberline {9.1}Preliminaries}{173}{section.9.1}
-\contentsline {section}{\numberline {9.2}Connecting a servomotor with Arduino Uno\ using a breadboard}{174}{section.9.2}
-\contentsline {section}{\numberline {9.3}Controlling the servomotor through the Arduino IDE}{175}{section.9.3}
-\contentsline {subsection}{\numberline {9.3.1}Controlling the servomotor}{175}{subsection.9.3.1}
-\contentsline {subsection}{\numberline {9.3.2}Arduino Code}{178}{subsection.9.3.2}
-\contentsline {section}{\numberline {9.4}Controlling the servomotor through Scilab}{180}{section.9.4}
-\contentsline {subsection}{\numberline {9.4.1}Controlling the servomotor}{180}{subsection.9.4.1}
-\contentsline {subsection}{\numberline {9.4.2}Scilab Code}{182}{subsection.9.4.2}
-\contentsline {section}{\numberline {9.5}Controling the servomotor through Xcos}{183}{section.9.5}
-\contentsline {section}{\numberline {9.6}Controlling the servomotor through Python}{188}{section.9.6}
-\contentsline {subsection}{\numberline {9.6.1}Controlling the servomotor}{188}{subsection.9.6.1}
-\contentsline {subsection}{\numberline {9.6.2}Python Code}{189}{subsection.9.6.2}
-\contentsline {section}{\numberline {9.7}Controlling the servomotor through Julia}{193}{section.9.7}
-\contentsline {subsection}{\numberline {9.7.1}Controlling the servomotor}{193}{subsection.9.7.1}
-\contentsline {subsection}{\numberline {9.7.2}Julia Code}{195}{subsection.9.7.2}
-\contentsline {section}{\numberline {9.8}Controlling the servomotor through OpenModelica}{196}{section.9.8}
-\contentsline {subsection}{\numberline {9.8.1}Controlling the servomotor}{196}{subsection.9.8.1}
-\contentsline {subsection}{\numberline {9.8.2}OpenModelica Code}{198}{subsection.9.8.2}
-\contentsline {chapter}{\numberline {10}Interfacing a DC Motor}{203}{chapter.10}
-\contentsline {section}{\numberline {10.1}Preliminaries}{203}{section.10.1}
-\contentsline {section}{\numberline {10.2}Controlling the DC motor from Arduino}{205}{section.10.2}
-\contentsline {subsection}{\numberline {10.2.1}Controlling the DC motor}{205}{subsection.10.2.1}
-\contentsline {paragraph}{Note:}{207}{section*.142}
-\contentsline {subsection}{\numberline {10.2.2}Arduino Code}{208}{subsection.10.2.2}
-\contentsline {section}{\numberline {10.3}Controlling the DC motor from Scilab}{210}{section.10.3}
-\contentsline {subsection}{\numberline {10.3.1}Controlling the DC motor}{210}{subsection.10.3.1}
-\contentsline {paragraph}{Note:}{210}{section*.143}
-\contentsline {paragraph}{Note:}{211}{section*.144}
-\contentsline {subsection}{\numberline {10.3.2}Scilab Code}{212}{subsection.10.3.2}
-\contentsline {section}{\numberline {10.4}Controlling the DC motor from Xcos}{213}{section.10.4}
-\contentsline {section}{\numberline {10.5}Controlling the DC motor from Python}{217}{section.10.5}
-\contentsline {subsection}{\numberline {10.5.1}Controlling the DC motor}{217}{subsection.10.5.1}
-\contentsline {paragraph}{Note:}{217}{section*.151}
-\contentsline {paragraph}{Note:}{219}{section*.152}
-\contentsline {subsection}{\numberline {10.5.2}Python Code}{219}{subsection.10.5.2}
-\contentsline {section}{\numberline {10.6}Controlling the DC motor from Julia}{222}{section.10.6}
-\contentsline {subsection}{\numberline {10.6.1}Controlling the DC motor}{222}{subsection.10.6.1}
-\contentsline {paragraph}{Note:}{222}{section*.153}
-\contentsline {paragraph}{Note:}{224}{section*.154}
-\contentsline {subsection}{\numberline {10.6.2}Julia Code}{225}{subsection.10.6.2}
-\contentsline {section}{\numberline {10.7}Controlling the DC motor from OpenModelica}{226}{section.10.7}
-\contentsline {subsection}{\numberline {10.7.1}Controlling the DC motor}{226}{subsection.10.7.1}
-\contentsline {paragraph}{Note:}{226}{section*.155}
-\contentsline {paragraph}{Note:}{227}{section*.156}
-\contentsline {subsection}{\numberline {10.7.2}OpenModelica Code}{228}{subsection.10.7.2}
-\contentsline {chapter}{\numberline {11}Implementation of Modbus Protocol}{231}{chapter.11}
-\contentsline {section}{\numberline {11.1}Preliminaries}{231}{section.11.1}
-\contentsline {subsection}{\numberline {11.1.1}Energy meter}{233}{subsection.11.1.1}
-\contentsline {paragraph}{Note:}{235}{section*.163}
-\contentsline {subsection}{\numberline {11.1.2}Endianness}{236}{subsection.11.1.2}
-\contentsline {section}{\numberline {11.2}Setup for the experiment}{238}{section.11.2}
-\contentsline {section}{\numberline {11.3}Software required for this experiment}{239}{section.11.3}
-\contentsline {subsection}{\numberline {11.3.1}Arduino Firmware}{241}{subsection.11.3.1}
-\contentsline {section}{\numberline {11.4}Manifestation of Modbus protocol through Scilab}{242}{section.11.4}
-\contentsline {section}{\numberline {11.5}Reading the electrical parameters from Scilab}{243}{section.11.5}
-\contentsline {subsection}{\numberline {11.5.1}Reading the electrical parameters}{243}{subsection.11.5.1}
-\contentsline {subsection}{\numberline {11.5.2}Scilab Code}{243}{subsection.11.5.2}
-\contentsline {paragraph}{Note: }{244}{section*.171}
-\contentsline {subsection}{\numberline {11.5.3}Output in the Scilab Console}{244}{subsection.11.5.3}
-\contentsline {section}{\numberline {11.6}Reading the electrical parameters from Xcos}{247}{section.11.6}
-\contentsline {section}{\numberline {11.7}Manifestation of Modbus protocol through Python}{249}{section.11.7}
-\contentsline {paragraph}{Note: }{249}{section*.180}
-\contentsline {section}{\numberline {11.8}Reading the electrical parameters from Python}{249}{section.11.8}
-\contentsline {subsection}{\numberline {11.8.1}Reading the electrical parameters}{249}{subsection.11.8.1}
-\contentsline {subsection}{\numberline {11.8.2}Python Code}{250}{subsection.11.8.2}
-\contentsline {section}{\numberline {11.9}Manifestation of Modbus protocol through Julia}{250}{section.11.9}
-\contentsline {paragraph}{Note: }{251}{section*.181}
-\contentsline {section}{\numberline {11.10}Reading the electrical parameters from Julia}{251}{section.11.10}
-\contentsline {subsection}{\numberline {11.10.1}Reading the electrical parameters}{251}{subsection.11.10.1}
-\contentsline {subsection}{\numberline {11.10.2}Julia Code}{251}{subsection.11.10.2}
-\contentsline {section}{\numberline {11.11}Manifestation of Modbus protocol through OpenModelica}{252}{section.11.11}
-\contentsline {paragraph}{Note: }{253}{section*.182}
-\contentsline {section}{\numberline {11.12}Reading the electrical parameters from OpenModelica}{253}{section.11.12}
-\contentsline {subsection}{\numberline {11.12.1}Reading the electrical parameters}{253}{subsection.11.12.1}
-\contentsline {subsection}{\numberline {11.12.2}OpenModelica Code}{253}{subsection.11.12.2}
-\contentsline {chapter}{\numberline {References}}{255}{chapter*.183}
+\contentsline {chapter}{\numberline {List of Acronyms}}{xxv}{chapter*.9}%
+\contentsline {chapter}{\numberline {1}Introduction}{1}{chapter.1}%
+\contentsline {chapter}{\numberline {2}Hardware Environment}{3}{chapter.2}%
+\contentsline {section}{\numberline {2.1}Microcontroller}{3}{section.2.1}%
+\contentsline {subsection}{\numberline {2.1.1}Organization of a Microcontroller}{3}{subsection.2.1.1}%
+\contentsline {subsection}{\numberline {2.1.2}Microcontroller Peripherals}{5}{subsection.2.1.2}%
+\contentsline {section}{\numberline {2.2}Open Source Hardware (OSHW)}{7}{section.2.2}%
+\contentsline {section}{\numberline {2.3}Arduino}{8}{section.2.3}%
+\contentsline {subsection}{\numberline {2.3.1}Brief History}{8}{subsection.2.3.1}%
+\contentsline {subsection}{\numberline {2.3.2}Arduino Uno Board}{9}{subsection.2.3.2}%
+\contentsline {subsection}{\numberline {2.3.3}Popular Arduino Projects}{9}{subsection.2.3.3}%
+\contentsline {paragraph}{Arduino phone:}{10}{section*.17}%
+\contentsline {paragraph}{Candy sorting machine:}{11}{section*.19}%
+\contentsline {paragraph}{3D printers:}{11}{section*.20}%
+\contentsline {section}{\numberline {2.4}Shield}{11}{section.2.4}%
+\contentsline {section}{\numberline {2.5}Experimental Test Bed}{12}{section.2.5}%
+\contentsline {chapter}{\numberline {3}Communication between Software and Arduino}{17}{chapter.3}%
+\contentsline {section}{\numberline {3.1}Arduino IDE}{17}{section.3.1}%
+\contentsline {subsection}{\numberline {3.1.1}Downloading and installing on Windows}{18}{subsection.3.1.1}%
+\contentsline {subsection}{\numberline {3.1.2}Downloading and installing on GNU/Linux Ubuntu}{19}{subsection.3.1.2}%
+\contentsline {subsection}{\numberline {3.1.3}Arduino Development Environment}{21}{subsection.3.1.3}%
+\contentsline {subsection}{\numberline {3.1.4}Testing Arduino with a sample program}{24}{subsection.3.1.4}%
+\contentsline {subsection}{\numberline {3.1.5}FLOSS Firmware}{25}{subsection.3.1.5}%
+\contentsline {section}{\numberline {3.2}Scilab}{25}{section.3.2}%
+\contentsline {subsection}{\numberline {3.2.1}Downloading and installing on Windows}{26}{subsection.3.2.1}%
+\contentsline {subsection}{\numberline {3.2.2}Downloading and installing on GNU/Linux Ubuntu}{26}{subsection.3.2.2}%
+\contentsline {subsection}{\numberline {3.2.3}Scilab-Arduino toolbox}{27}{subsection.3.2.3}%
+\contentsline {subsection}{\numberline {3.2.4}Identifying Arduino communication port number}{29}{subsection.3.2.4}%
+\contentsline {subsection}{\numberline {3.2.5}Testing Scilab-Arduino toolbox}{31}{subsection.3.2.5}%
+\contentsline {subsection}{\numberline {3.2.6}Firmware}{33}{subsection.3.2.6}%
+\contentsline {section}{\numberline {3.3}Xcos}{35}{section.3.3}%
+\contentsline {subsection}{\numberline {3.3.1}Downloading, installing and testing}{35}{subsection.3.3.1}%
+\contentsline {subsection}{\numberline {3.3.2}Use case}{36}{subsection.3.3.2}%
+\contentsline {subsection}{\numberline {3.3.3}Xcos-Arduino}{40}{subsection.3.3.3}%
+\contentsline {section}{\numberline {3.4}Python}{41}{section.3.4}%
+\contentsline {subsection}{\numberline {3.4.1}Downloading and installing on Windows}{41}{subsection.3.4.1}%
+\contentsline {subsection}{\numberline {3.4.2}Downloading and installing on GNU/Linux Ubuntu}{44}{subsection.3.4.2}%
+\contentsline {subsection}{\numberline {3.4.3}Python-Arduino toolbox}{45}{subsection.3.4.3}%
+\contentsline {subsection}{\numberline {3.4.4}Firmware}{46}{subsection.3.4.4}%
+\contentsline {section}{\numberline {3.5}Julia}{47}{section.3.5}%
+\contentsline {subsection}{\numberline {3.5.1}Downloading and installing on Windows}{47}{subsection.3.5.1}%
+\contentsline {subsection}{\numberline {3.5.2}Downloading and installing GNU/Linux Ubuntu}{51}{subsection.3.5.2}%
+\contentsline {subsection}{\numberline {3.5.3}Julia-Arduino toolbox}{55}{subsection.3.5.3}%
+\contentsline {subsection}{\numberline {3.5.4}Firmware}{55}{subsection.3.5.4}%
+\contentsline {section}{\numberline {3.6}OpenModelica}{56}{section.3.6}%
+\contentsline {subsection}{\numberline {3.6.1}Downloading and installing on Windows}{56}{subsection.3.6.1}%
+\contentsline {subsection}{\numberline {3.6.2}Downloading and installing on GNU/Linux Ubuntu}{58}{subsection.3.6.2}%
+\contentsline {subsection}{\numberline {3.6.3}Simulating models in OpenModelica}{59}{subsection.3.6.3}%
+\contentsline {subsection}{\numberline {3.6.4}OpenModelica-Arduino toolbox}{61}{subsection.3.6.4}%
+\contentsline {subsection}{\numberline {3.6.5}Firmware}{65}{subsection.3.6.5}%
+\contentsline {chapter}{\numberline {4}Interfacing a Light Emitting Diode}{67}{chapter.4}%
+\contentsline {section}{\numberline {4.1}Preliminaries}{67}{section.4.1}%
+\contentsline {section}{\numberline {4.2}Connecting an RGB LED with Arduino Uno\ using a breadboard}{69}{section.4.2}%
+\contentsline {section}{\numberline {4.3}Lighting the LED from the Arduino IDE}{70}{section.4.3}%
+\contentsline {subsection}{\numberline {4.3.1}Lighting the LED}{70}{subsection.4.3.1}%
+\contentsline {paragraph}{Note:}{71}{section*.76}%
+\contentsline {paragraph}{Note:}{71}{section*.78}%
+\contentsline {subsection}{\numberline {4.3.2}Arduino Code}{72}{subsection.4.3.2}%
+\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{74}{section.4.4}%
+\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{74}{subsection.4.4.1}%
+\contentsline {subsection}{\numberline {4.4.2}Scilab Code}{75}{subsection.4.4.2}%
+\contentsline {section}{\numberline {4.5}Lighting the LED from Scilab Xcos}{76}{section.4.5}%
+\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{81}{section.4.6}%
+\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{81}{subsection.4.6.1}%
+\contentsline {subsection}{\numberline {4.6.2}Python Code}{83}{subsection.4.6.2}%
+\contentsline {section}{\numberline {4.7}Lighting the LED from Julia}{86}{section.4.7}%
+\contentsline {subsection}{\numberline {4.7.1}Lighting the LED}{86}{subsection.4.7.1}%
+\contentsline {subsection}{\numberline {4.7.2}Julia Code}{87}{subsection.4.7.2}%
+\contentsline {section}{\numberline {4.8}Lighting the LED from OpenModelica}{89}{section.4.8}%
+\contentsline {subsection}{\numberline {4.8.1}Lighting the LED}{89}{subsection.4.8.1}%
+\contentsline {subsection}{\numberline {4.8.2}OpenModelica Code}{90}{subsection.4.8.2}%
+\contentsline {chapter}{\numberline {5}Interfacing a Pushbutton}{95}{chapter.5}%
+\contentsline {section}{\numberline {5.1}Preliminaries}{95}{section.5.1}%
+\contentsline {section}{\numberline {5.2}Connecting a pushbutton with Arduino Uno\ using a breadboard}{95}{section.5.2}%
+\contentsline {section}{\numberline {5.3}Reading the pushbutton status from the Arduino IDE}{98}{section.5.3}%
+\contentsline {subsection}{\numberline {5.3.1}Reading the pushbutton status}{98}{subsection.5.3.1}%
+\contentsline {subsection}{\numberline {5.3.2}Arduino Code}{99}{subsection.5.3.2}%
+\contentsline {section}{\numberline {5.4}Reading the pushbutton Status from Scilab}{100}{section.5.4}%
+\contentsline {subsection}{\numberline {5.4.1}Reading the pushbutton Status}{100}{subsection.5.4.1}%
+\contentsline {subsection}{\numberline {5.4.2}Scilab Code}{101}{subsection.5.4.2}%
+\contentsline {section}{\numberline {5.5}Accessing the pushbutton from Xcos}{102}{section.5.5}%
+\contentsline {section}{\numberline {5.6}Reading the pushbutton status from Python}{105}{section.5.6}%
+\contentsline {subsection}{\numberline {5.6.1}Reading the pushbutton status}{105}{subsection.5.6.1}%
+\contentsline {subsection}{\numberline {5.6.2}Python Code}{106}{subsection.5.6.2}%
+\contentsline {section}{\numberline {5.7}Reading the pushbutton status from Julia}{108}{section.5.7}%
+\contentsline {subsection}{\numberline {5.7.1}Reading the pushbutton status}{108}{subsection.5.7.1}%
+\contentsline {subsection}{\numberline {5.7.2}Julia Code}{109}{subsection.5.7.2}%
+\contentsline {section}{\numberline {5.8}Reading the pushbutton status from OpenModelica}{110}{section.5.8}%
+\contentsline {subsection}{\numberline {5.8.1}Reading the pushbutton status}{110}{subsection.5.8.1}%
+\contentsline {subsection}{\numberline {5.8.2}OpenModelica Code}{111}{subsection.5.8.2}%
+\contentsline {chapter}{\numberline {6}Interfacing a Light Dependent Resistor}{115}{chapter.6}%
+\contentsline {section}{\numberline {6.1}Preliminaries}{115}{section.6.1}%
+\contentsline {section}{\numberline {6.2}Connecting an LDR with Arduino Uno\ using a breadboard}{117}{section.6.2}%
+\contentsline {section}{\numberline {6.3}Interfacing the LDR through the Arduino IDE}{118}{section.6.3}%
+\contentsline {subsection}{\numberline {6.3.1}Interfacing the LDR}{118}{subsection.6.3.1}%
+\contentsline {subsection}{\numberline {6.3.2}Arduino Code}{120}{subsection.6.3.2}%
+\contentsline {section}{\numberline {6.4}Interfacing the LDR through Scilab}{120}{section.6.4}%
+\contentsline {subsection}{\numberline {6.4.1}Interfacing the LDR}{120}{subsection.6.4.1}%
+\contentsline {subsection}{\numberline {6.4.2}Scilab Code}{122}{subsection.6.4.2}%
+\contentsline {section}{\numberline {6.5}Interfacing the LDR through Xcos}{122}{section.6.5}%
+\contentsline {section}{\numberline {6.6}Interfacing the LDR through Python}{126}{section.6.6}%
+\contentsline {subsection}{\numberline {6.6.1}Interfacing the LDR}{126}{subsection.6.6.1}%
+\contentsline {subsection}{\numberline {6.6.2}Python Code}{127}{subsection.6.6.2}%
+\contentsline {section}{\numberline {6.7}Interfacing the LDR through Julia}{129}{section.6.7}%
+\contentsline {subsection}{\numberline {6.7.1}Interfacing the LDR}{129}{subsection.6.7.1}%
+\contentsline {subsection}{\numberline {6.7.2}Julia Code}{130}{subsection.6.7.2}%
+\contentsline {section}{\numberline {6.8}Interfacing the LDR through OpenModelica}{131}{section.6.8}%
+\contentsline {subsection}{\numberline {6.8.1}Interfacing the LDR}{131}{subsection.6.8.1}%
+\contentsline {subsection}{\numberline {6.8.2}OpenModelica Code}{132}{subsection.6.8.2}%
+\contentsline {chapter}{\numberline {7}Interfacing a Potentiometer}{135}{chapter.7}%
+\contentsline {section}{\numberline {7.1}Preliminaries}{135}{section.7.1}%
+\contentsline {section}{\numberline {7.2}Connecting a potentiometer with Arduino Uno\ using a breadboard}{136}{section.7.2}%
+\contentsline {section}{\numberline {7.3}Reading the potentiometer from the Arduino IDE}{137}{section.7.3}%
+\contentsline {subsection}{\numberline {7.3.1}Reading the potentiometer}{137}{subsection.7.3.1}%
+\contentsline {subsection}{\numberline {7.3.2}Arduino Code}{138}{subsection.7.3.2}%
+\contentsline {section}{\numberline {7.4}Reading the potentiometer from Scilab}{139}{section.7.4}%
+\contentsline {subsection}{\numberline {7.4.1}Reading the potentiometer}{139}{subsection.7.4.1}%
+\contentsline {subsection}{\numberline {7.4.2}Scilab Code}{140}{subsection.7.4.2}%
+\contentsline {section}{\numberline {7.5}Reading the potentiometer from Xcos}{141}{section.7.5}%
+\contentsline {section}{\numberline {7.6}Reading the potentiometer from Python}{143}{section.7.6}%
+\contentsline {subsection}{\numberline {7.6.1}Reading the potentiometer}{143}{subsection.7.6.1}%
+\contentsline {subsection}{\numberline {7.6.2}Python Code}{143}{subsection.7.6.2}%
+\contentsline {section}{\numberline {7.7}Reading the potentiometer from Julia}{145}{section.7.7}%
+\contentsline {subsection}{\numberline {7.7.1}Reading the potentiometer}{145}{subsection.7.7.1}%
+\contentsline {subsection}{\numberline {7.7.2}Julia Code}{145}{subsection.7.7.2}%
+\contentsline {section}{\numberline {7.8}Reading the potentiometer from OpenModelica}{146}{section.7.8}%
+\contentsline {subsection}{\numberline {7.8.1}Reading the potentiometer}{146}{subsection.7.8.1}%
+\contentsline {subsection}{\numberline {7.8.2}OpenModelica Code}{147}{subsection.7.8.2}%
+\contentsline {chapter}{\numberline {8}Interfacing a Thermistor}{149}{chapter.8}%
+\contentsline {section}{\numberline {8.1}Preliminaries}{149}{section.8.1}%
+\contentsline {section}{\numberline {8.2}Connecting a thermistor with Arduino Uno\ using a breadboard}{151}{section.8.2}%
+\contentsline {section}{\numberline {8.3}Interfacing the thermistor from the Arduino IDE}{152}{section.8.3}%
+\contentsline {subsection}{\numberline {8.3.1}Interfacing the thermistor}{152}{subsection.8.3.1}%
+\contentsline {paragraph}{Note:}{154}{section*.113}%
+\contentsline {subsection}{\numberline {8.3.2}Arduino Code}{154}{subsection.8.3.2}%
+\contentsline {section}{\numberline {8.4}Interfacing the thermistor from Scilab}{156}{section.8.4}%
+\contentsline {subsection}{\numberline {8.4.1}Interfacing the thermistor}{156}{subsection.8.4.1}%
+\contentsline {paragraph}{Note:}{157}{section*.114}%
+\contentsline {subsection}{\numberline {8.4.2}Scilab Code}{158}{subsection.8.4.2}%
+\contentsline {section}{\numberline {8.5}Interfacing the thermistor from Xcos}{159}{section.8.5}%
+\contentsline {paragraph}{Note:}{162}{section*.121}%
+\contentsline {section}{\numberline {8.6}Interfacing the thermistor from Python}{162}{section.8.6}%
+\contentsline {subsection}{\numberline {8.6.1}Interfacing the thermistor}{162}{subsection.8.6.1}%
+\contentsline {paragraph}{Note:}{164}{section*.122}%
+\contentsline {subsection}{\numberline {8.6.2}Python Code}{165}{subsection.8.6.2}%
+\contentsline {section}{\numberline {8.7}Interfacing the thermistor from Julia}{167}{section.8.7}%
+\contentsline {subsection}{\numberline {8.7.1}Interfacing the thermistor}{167}{subsection.8.7.1}%
+\contentsline {paragraph}{Note:}{168}{section*.123}%
+\contentsline {subsection}{\numberline {8.7.2}Julia Code}{168}{subsection.8.7.2}%
+\contentsline {section}{\numberline {8.8}Interfacing the thermistor from OpenModelica}{169}{section.8.8}%
+\contentsline {subsection}{\numberline {8.8.1}Interfacing the thermistor}{169}{subsection.8.8.1}%
+\contentsline {paragraph}{Note:}{171}{section*.124}%
+\contentsline {subsection}{\numberline {8.8.2}OpenModelica Code}{171}{subsection.8.8.2}%
+\contentsline {chapter}{\numberline {9}Interfacing a Servomotor}{173}{chapter.9}%
+\contentsline {section}{\numberline {9.1}Preliminaries}{173}{section.9.1}%
+\contentsline {section}{\numberline {9.2}Connecting a servomotor with Arduino Uno\ using a breadboard}{174}{section.9.2}%
+\contentsline {section}{\numberline {9.3}Controlling the servomotor through the Arduino IDE}{175}{section.9.3}%
+\contentsline {subsection}{\numberline {9.3.1}Controlling the servomotor}{175}{subsection.9.3.1}%
+\contentsline {subsection}{\numberline {9.3.2}Arduino Code}{178}{subsection.9.3.2}%
+\contentsline {section}{\numberline {9.4}Controlling the servomotor through Scilab}{180}{section.9.4}%
+\contentsline {subsection}{\numberline {9.4.1}Controlling the servomotor}{180}{subsection.9.4.1}%
+\contentsline {subsection}{\numberline {9.4.2}Scilab Code}{182}{subsection.9.4.2}%
+\contentsline {section}{\numberline {9.5}Controling the servomotor through Xcos}{183}{section.9.5}%
+\contentsline {section}{\numberline {9.6}Controlling the servomotor through Python}{188}{section.9.6}%
+\contentsline {subsection}{\numberline {9.6.1}Controlling the servomotor}{188}{subsection.9.6.1}%
+\contentsline {subsection}{\numberline {9.6.2}Python Code}{189}{subsection.9.6.2}%
+\contentsline {section}{\numberline {9.7}Controlling the servomotor through Julia}{193}{section.9.7}%
+\contentsline {subsection}{\numberline {9.7.1}Controlling the servomotor}{193}{subsection.9.7.1}%
+\contentsline {subsection}{\numberline {9.7.2}Julia Code}{195}{subsection.9.7.2}%
+\contentsline {section}{\numberline {9.8}Controlling the servomotor through OpenModelica}{196}{section.9.8}%
+\contentsline {subsection}{\numberline {9.8.1}Controlling the servomotor}{196}{subsection.9.8.1}%
+\contentsline {subsection}{\numberline {9.8.2}OpenModelica Code}{198}{subsection.9.8.2}%
+\contentsline {chapter}{\numberline {10}Interfacing a DC Motor}{203}{chapter.10}%
+\contentsline {section}{\numberline {10.1}Preliminaries}{203}{section.10.1}%
+\contentsline {section}{\numberline {10.2}Controlling the DC motor from Arduino}{205}{section.10.2}%
+\contentsline {subsection}{\numberline {10.2.1}Controlling the DC motor}{205}{subsection.10.2.1}%
+\contentsline {paragraph}{Note:}{207}{section*.142}%
+\contentsline {subsection}{\numberline {10.2.2}Arduino Code}{208}{subsection.10.2.2}%
+\contentsline {section}{\numberline {10.3}Controlling the DC motor from Scilab}{210}{section.10.3}%
+\contentsline {subsection}{\numberline {10.3.1}Controlling the DC motor}{210}{subsection.10.3.1}%
+\contentsline {paragraph}{Note:}{210}{section*.143}%
+\contentsline {paragraph}{Note:}{211}{section*.144}%
+\contentsline {subsection}{\numberline {10.3.2}Scilab Code}{212}{subsection.10.3.2}%
+\contentsline {section}{\numberline {10.4}Controlling the DC motor from Xcos}{213}{section.10.4}%
+\contentsline {section}{\numberline {10.5}Controlling the DC motor from Python}{217}{section.10.5}%
+\contentsline {subsection}{\numberline {10.5.1}Controlling the DC motor}{217}{subsection.10.5.1}%
+\contentsline {paragraph}{Note:}{217}{section*.151}%
+\contentsline {paragraph}{Note:}{219}{section*.152}%
+\contentsline {subsection}{\numberline {10.5.2}Python Code}{219}{subsection.10.5.2}%
+\contentsline {section}{\numberline {10.6}Controlling the DC motor from Julia}{222}{section.10.6}%
+\contentsline {subsection}{\numberline {10.6.1}Controlling the DC motor}{222}{subsection.10.6.1}%
+\contentsline {paragraph}{Note:}{222}{section*.153}%
+\contentsline {paragraph}{Note:}{224}{section*.154}%
+\contentsline {subsection}{\numberline {10.6.2}Julia Code}{225}{subsection.10.6.2}%
+\contentsline {section}{\numberline {10.7}Controlling the DC motor from OpenModelica}{226}{section.10.7}%
+\contentsline {subsection}{\numberline {10.7.1}Controlling the DC motor}{226}{subsection.10.7.1}%
+\contentsline {paragraph}{Note:}{226}{section*.155}%
+\contentsline {paragraph}{Note:}{227}{section*.156}%
+\contentsline {subsection}{\numberline {10.7.2}OpenModelica Code}{228}{subsection.10.7.2}%
+\contentsline {chapter}{\numberline {11}Implementation of Modbus Protocol}{231}{chapter.11}%
+\contentsline {section}{\numberline {11.1}Preliminaries}{231}{section.11.1}%
+\contentsline {subsection}{\numberline {11.1.1}Energy meter}{233}{subsection.11.1.1}%
+\contentsline {paragraph}{Note:}{235}{section*.163}%
+\contentsline {subsection}{\numberline {11.1.2}Endianness}{236}{subsection.11.1.2}%
+\contentsline {section}{\numberline {11.2}Setup for the experiment}{238}{section.11.2}%
+\contentsline {section}{\numberline {11.3}Software required for this experiment}{239}{section.11.3}%
+\contentsline {subsection}{\numberline {11.3.1}Arduino Firmware}{241}{subsection.11.3.1}%
+\contentsline {section}{\numberline {11.4}Manifestation of Modbus protocol through Scilab}{242}{section.11.4}%
+\contentsline {section}{\numberline {11.5}Reading the electrical parameters from Scilab}{243}{section.11.5}%
+\contentsline {subsection}{\numberline {11.5.1}Reading the electrical parameters}{243}{subsection.11.5.1}%
+\contentsline {subsection}{\numberline {11.5.2}Scilab Code}{243}{subsection.11.5.2}%
+\contentsline {paragraph}{Note: }{244}{section*.171}%
+\contentsline {subsection}{\numberline {11.5.3}Output in the Scilab Console}{244}{subsection.11.5.3}%
+\contentsline {section}{\numberline {11.6}Reading the electrical parameters from Xcos}{247}{section.11.6}%
+\contentsline {section}{\numberline {11.7}Manifestation of Modbus protocol through Python}{249}{section.11.7}%
+\contentsline {paragraph}{Note: }{249}{section*.180}%
+\contentsline {section}{\numberline {11.8}Reading the electrical parameters from Python}{249}{section.11.8}%
+\contentsline {subsection}{\numberline {11.8.1}Reading the electrical parameters}{249}{subsection.11.8.1}%
+\contentsline {subsection}{\numberline {11.8.2}Python Code}{250}{subsection.11.8.2}%
+\contentsline {section}{\numberline {11.9}Manifestation of Modbus protocol through Julia}{250}{section.11.9}%
+\contentsline {paragraph}{Note: }{251}{section*.181}%
+\contentsline {section}{\numberline {11.10}Reading the electrical parameters from Julia}{251}{section.11.10}%
+\contentsline {subsection}{\numberline {11.10.1}Reading the electrical parameters}{251}{subsection.11.10.1}%
+\contentsline {subsection}{\numberline {11.10.2}Julia Code}{251}{subsection.11.10.2}%
+\contentsline {section}{\numberline {11.11}Manifestation of Modbus protocol through OpenModelica}{252}{section.11.11}%
+\contentsline {paragraph}{Note: }{253}{section*.182}%
+\contentsline {section}{\numberline {11.12}Reading the electrical parameters from OpenModelica}{253}{section.11.12}%
+\contentsline {subsection}{\numberline {11.12.1}Reading the electrical parameters}{253}{subsection.11.12.1}%
+\contentsline {subsection}{\numberline {11.12.2}OpenModelica Code}{253}{subsection.11.12.2}%
+\contentsline {chapter}{\numberline {References}}{255}{chapter*.183}%
diff --git a/indent.log b/indent.log
index 6d97c5f..f40b907 100644
--- a/indent.log
+++ b/indent.log
@@ -1,7 +1,7 @@
 INFO: latexindent version 3.7.1, 2019-09-07, a script to indent .tex files
       latexindent lives here: /usr/share/texlive/texmf-dist/scripts/latexindent/
-      Sun May 23 06:19:36 2021
-      Filename: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/__latexindent_temp.tex
+      Mon May 24 01:56:11 2021
+      Filename: /home/fossee/Desktop/floss-scilab-arduino/suppl/__latexindent_temp.tex
 INFO: Processing switches:
       -y|--yaml: YAML settings specified via command line
       -c|--cruft: cruft directory
@@ -13,7 +13,7 @@ INFO: YAML settings read: indentconfig.yaml or .indentconfig.yaml
       To specify user settings you would put indentconfig.yaml here: /home/fossee/indentconfig.yaml
       Alternatively, you can use the hidden file .indentconfig.yaml as: /home/fossee/.indentconfig.yaml
 INFO: YAML settings read: -y switch
-      Updating masterSettings with defaultIndent:       
+      Updating masterSettings with defaultIndent:   
 INFO: Phase 1: searching for objects
 INFO: Phase 2: finding surrounding indentation
 INFO: Phase 3: indenting objects
diff --git a/julia-floss-arduino.pdf b/julia-floss-arduino.pdf
index 28ed148..fc8730f 100644
--- a/julia-floss-arduino.pdf
+++ b/julia-floss-arduino.pdf
diff --git a/openmodelica-floss-arduino.pdf b/openmodelica-floss-arduino.pdf
index c3d98dc..b0490dd 100644
--- a/openmodelica-floss-arduino.pdf
+++ b/openmodelica-floss-arduino.pdf
diff --git a/python-floss-arduino.pdf b/python-floss-arduino.pdf
index 04809bd..6cd0ff1 100644
--- a/python-floss-arduino.pdf
+++ b/python-floss-arduino.pdf
diff --git a/scilab-floss-arduino.pdf b/scilab-floss-arduino.pdf
index 344226d..eac295a 100644
--- a/scilab-floss-arduino.pdf
+++ b/scilab-floss-arduino.pdf
diff --git a/suppl/intro.tex b/suppl/intro.tex
index ca87493..72c5500 100644
--- a/suppl/intro.tex
+++ b/suppl/intro.tex
@@ -1,80 +1,78 @@
 \chapter{Introduction}
 \thispagestyle{empty}
 \label{sec:intro}
-Microcontrollers are the foundation for a modern, manufacturing based,
-economy.  One cannot fulfill the dreams of one's citizens without a
-thriving manufacturing sector.  As it is open source, \arduino\ is of
+Microcontrollers are the foundation for a modern, manufacturing-based
+economy.  One cannot fulfill the dreams of one's citizens without a
+thriving manufacturing sector.  As it is open-source, \arduino\ is of
 particular interest to hobbyists, students, small and medium scale
 manufacturers, and people from developing countries, in particular.
 
-Scilab is a state of the art computing software.  It is also open
-source.  As a result, this is also extremely useful to the groups
-mentioned above.  If the French National Space Agency CNES can
+Scilab is a state-of-the-art computing software.  It is also open-source.  As a result, this is also extremely useful to the groups
+mentioned above.  If the French National Space Agency CNES can
 extensively use Scilab \cite{CNES-Scilab}, why can't others rely on
-it?  If many of India's satellites can be placed in their precise
+it?  If many of India's satellites can be placed in their precise
 orbits by the Ariane rockets launched by CNES through Scilab
 calculations, why can't others use Scilab?
 
-The above argument can be extended to other open source software
-systems Python, Julia and OpenModelica.  Python is a versatile
+The above argument can be extended to other open-source software
+systems Python, Julia, and OpenModelica.  Python is a versatile
 programming language with a high degree of expressiveness, which
-allows code written in it to be small.  Python is also the preferred
-language in emerging areas, such as machine learning.  Julia is also
-highly expressive, just as Scilab and Python.  The only difference is
+allows code written in it to be small.  Python is also the preferred
+language in emerging areas, such as machine learning.  Julia is also
+highly expressive, just as Scilab and Python.  The only difference is
 that Julia is generally faster to execute, compared to Scilab and
 Python.
 
-OpenModelica implements the Modelica language.  It is especially
-created for modelling. It is an object oriented programming language,
-especially when it comes to modelling.  It has a GUI that lends itself
-to connecting different building blocks to create models.  Models in
+OpenModelica implements the Modelica language.  It is especially
+created for modeling. It is an object-oriented programming language,
+especially when it comes to modeling.  It has a GUI that lends itself
+to connecting different building blocks to create models.  Models in
 OpenModelica are solved by collecting equations from different
-building blocks, and solving them simultaneously.
+building blocks and solving them simultaneously.
 
 Xcos is a GUI based system building tool for Scilab, somewhat similar
 to
 Simulink$^{\text{\textregistered}}$\footnote{Simulink$^{\text{\textregistered}}$
-is a registered trademark of Mathworks, Inc.}.  Through Xcos, it is
-possible to build interconnected systems graphically.  Xcos also is an
-open source software tool.
+  is a registered trademark of Mathworks, Inc.}.  Through Xcos, it is
+possible to build interconnected systems graphically.  Xcos also is an
+open-source software tool.
 
-Although Scilab, Xcos, Python, Julia and OpenModelica are powerful and
+Although Scilab, Xcos, Python, Julia, and OpenModelica are powerful and
 free, there has not been much literature that teaches how to use them
-to program the versatile \arduino.  To address this gap, we have
-written this series of books.  We have provided code written in all of
-these open source software.  The reader is recommended to go through
+to program the versatile \arduino.  To address this gap, we have
+written this series of books.  We have provided code written in all of
+these open-source software.  The reader is recommended to go through
 the book that covers a particular software.
 
 The only way we can become versatile in hardware is through hands-on
-training.  To this end, we make use of the easily available low cost
-\arduino\ board to introduce the reader to computer interfacing.  We
+training.  To this end, we make use of the easily available low-cost
+\arduino\ board to introduce the reader to computer interfacing.  We
 also make available the details of a shield that makes the
-\arduino\ use extremely easy and intuitive.  We tell the user how to
+\arduino\ use extremely easy and intuitive.  We tell the user how to
 install the firmware to make the \arduino\ board communicate with the
-computer.  We explain how to control the peripherals on the
-\arduino\ board with user developed software.
+computer.  We explain how to control the peripherals on the
+\arduino\ board with user-developed software.
 
-The Scilab \arduino\ toolbox is already available for Windows
-\cite{scilab-arduino}.  We have suitably modified it, so that it works
-on Linux also.  We give the required programs to experiment with the
-sensors and actuators that come with the shield, a DC motor and a
-servomotor.  These programs are available for all of the following
-environments: Arduino IDE, Scilab, Xcos, Python, Julia and
-OpenModelica.  In addition to these toolboxes, we provide the firmware
+The Scilab-Arduino toolbox is already available for Windows
+\cite{scilab-arduino}.  We have suitably modified it so that it works
+on Linux also.  We give the required programs to experiment with the
+sensors and actuators that come with the shield, a DC motor, and a
+servomotor.  These programs are available for all of the following
+environments: Arduino IDE, Scilab, Xcos, Python, Julia, and
+OpenModelica.  In addition to these toolboxes, we provide the firmware
 for each software and a program to check its working.
 
 This book teaches how to access the following sensors and actuators:
-LED, pushbutton, DC motor, Potentiometer and Servo motor.  A set of
-two to five programs are given for each.  These are given for all the
-software mentioned above.  The reader has to see the book devoted to
-the appropriate software.  We also explain where to find these
+LED, pushbutton, LDR, Potentiometer, Thermistor, Servo motor, and DC motor.  A set of two to five programs are given for each.  These are given for all the
+software mentioned above.  The reader has to see the book devoted to
+the appropriate software.  We also explain where to find these
 programs and how to execute them for each experiment.
 
-This book is written for self learners and hobbyists.  It has been
-field tested by 250 people who attended a hands-on workshop conducted
-at IIT Bombay in July 2015.  It has also been field tested by 25
+This book is written for self-learners and hobbyists.  It has been
+field-tested by 250 people who attended a hands-on workshop conducted
+at IIT Bombay in July 2015.  It has also been field-tested by 25
 people who participated in a TEQIP course held in Amravati in November
-2015.  
+2015.
 
 All the code described in this book is available at
 \url{https://floss-arduino.fossee.in/}.  On