diff options
Diffstat (limited to 'Latex/Latex3')
| -rw-r--r-- | Latex/Latex3/latex_basics.tex | 209 | ||||
| -rw-r--r-- | Latex/Latex3/latex_basics_and_structure_script.rst | 306 |
2 files changed, 321 insertions, 194 deletions
diff --git a/Latex/Latex3/latex_basics.tex b/Latex/Latex3/latex_basics.tex index 4d66ddb..4f97004 100644 --- a/Latex/Latex3/latex_basics.tex +++ b/Latex/Latex3/latex_basics.tex @@ -154,28 +154,18 @@ \begin{frame}[fragile] \frametitle{\typ{Top Matter}} - Let's add the title, author's name and the date. - \begin{itemize} - \item Add title, author and date. - \item Compile. - \item Nothing changes. - \item use \lstinline$\date{}$, to insert todays date. + Adding Title, Author name \& Date to our document, + \begin{itemize} + \item \lstinline$\title{}$, to add title + \item \lstinline$\author{}$, to add author name + \item \lstinline$\date{}$, to insert todays date + \item Compile + \item Nothing changes \end{itemize} - {\tiny - \begin{verbatim} - \documentclass{article} - \title{A Glimpse at Scipy} - \author{FOSSEE} - \date{June 2010} - \begin{document} - SciPy is open-source software for mathematics, science, and engineering. - \end{document} - \end{verbatim} - } \end{frame} \begin{frame}[fragile] - \frametitle{\typ{Top Matter}\ \ldots} + \frametitle{\typ{Top Matter}..} Now we add \alert{maketitle} command, which inserts the top-matter {\tiny \begin{verbatim} @@ -185,7 +175,8 @@ \date{June 2010} \begin{document} \maketitle - SciPy is open-source software for mathematics, science, and engineering. + SciPy is open-source software for mathematics, science, + and engineering. \end{document} \end{verbatim} } @@ -194,10 +185,16 @@ \begin{frame}[fragile] \frametitle{\typ{abstract command}} \begin{itemize} - \item \typ{abstract} environment inserts abstract. - \item Place it at the location where you want your abstract. + \item \typ{abstract} environment inserts abstract + \item \lstinline$\begin{abstract}$ + \item \lstinline$\end{abstract}$ + \item Place it at the location where you want your abstract \end{itemize} - {\tiny +\end{frame} + +\begin{frame}[fragile] + \frametitle{\typ{abstract command}..} +{\tiny \begin{verbatim} \documentclass{article} \title{A Glimpse at Scipy} @@ -206,9 +203,10 @@ \begin{document} \maketitle \begin{abstract} - This document shows a glimpse of the features of Scipy that will be explored during this course. + This document shows a glimpse of the features of Scipy. \end{abstract} - SciPy is open-source software for mathematics, science, and engineering. + SciPy is open-source software for mathematics, science, + and engineering. \end{document} \end{verbatim} } @@ -222,9 +220,14 @@ \item Auto numbered sections! \item \typ{*} to prevent numbering of a section \end{itemize} +\end{frame} + +\begin{frame}[fragile] + \frametitle{\typ{Sectioning}..} {\tiny \begin{verbatim} \documentclass{article} + \title{Sectioning} \author{FOSSEE} \date{31-February-2012} \begin{document} @@ -243,6 +246,7 @@ } \end{frame} + \begin{frame}[fragile] \frametitle{\typ{Creating Chapters}} \begin{itemize} @@ -251,6 +255,10 @@ \item Chapter can be added using \lstinline{\chapter} command \item Books \alert{do not} have the abstract environment. \end{itemize} +\end{frame} + +\begin{frame}[fragile] + \frametitle{\typ{Creating Chapters}..} {\tiny \begin{verbatim} \documentclass{book} @@ -275,16 +283,6 @@ } \end{frame} -\begin{frame}[fragile] - \frametitle{\typ{Sectioning and numbering}} - \begin{itemize} - \item subsections do not get numbering - \item Change \lstinline{secnumdepth} - \end{itemize} - \begin{lstlisting} - \setcounter{secnumdepth}{3} - \end{lstlisting} -\end{frame} \begin{frame}[fragile] \frametitle{Appendices} @@ -299,60 +297,60 @@ \begin{frame}[fragile] \frametitle{\typ{Table of Contents [TOC]}} \begin{itemize} - \item Our document is short, but let's learn to add a TOC \item Add \lstinline{\tableofcontents} where you want TOC to appear \item Compile \item Only headings appear. No page numbers \item A \lstinline{.toc} file is generated \item Re-compile - \item Any numbered section/block automatically appears \end{itemize} \end{frame} \begin{frame}[fragile] - \frametitle{\typ{TOC}\ \ldots} + \frametitle{\typ{TOC}..} \begin{itemize} + \item Any numbered section/block automatically appears \item Un-numbered sections are added to TOC using \lstinline{\addcontentsline} - \item For instance, \lstinline+\addcontentsline{toc}{section}{Intro}+ + \item For instance, + \lstinline+\addcontentsline{toc}{section}+ + \lstinline+{intro}+ \end{itemize} \end{frame} \begin{frame}[fragile] \frametitle{\typ{Exercise 1}} \begin{center} - Write a LaTeX script that creates a document of type article, which contains both a table of content and an appendix. The table of content should be at the beginning of the document and the appendix at the end. - The book should contain two chapters, with the first chapter containing two numbered and two un-numbered sections. The first un-numbered section should be present in the table of content. + Write a LaTeX script that creates a document of type book, + containing both a TOC at the beginning and an appendix at the end + of document. The book should contain two chapters with numbered \& + un-numbered sections \& these chapters should appear in the TOC. \end{center} \end{frame} \begin{frame}[fragile] \frametitle{\typ{Excercise 1: Solution}} - \begin{center} - Note - This File needs to be compiled twice - \end{center} {\tiny \begin{center} \begin{verbatim} - \documentclass{article} - \title{article with an appendix} - \begin{document} - \tableofcontents - \pagebreak - Main content - \section{Numbered Section1} - Section 1 Text - \subsection{Numbered Subsection1} - Numbered-Section 1’s Subsection Text. - \section{Numbered Section2} - Numbered-Section 2 Text - \section*{Un-numbered Section3} - \addcontentsline{toc}{section}{Numbered Subsection1} - First un-numbered Section Text.\\This appears in the table of content - \section*{Un-numbered Section4} - Second un-numbered Section Text - \appendix + \documentclass{book} + \title{My first book} + \begin{document} + \tableofcontents + \addcontentsline{toc}{section}{Chapter} + \chapter{My First Chapter} + Main + \section{Section1} + Section 1 Text + \subsubsection{My First Subsection} + Numbered-Section 1's Subsection Text + \section*{Section3} + First un-numbered Section Text + \chapter{So We say goodbye} + Thank you for reading dear reader + \section*{Section3} + First un-numbered Section Text + \appendix \section{Appendix - 1} \end{document} \end{verbatim} @@ -366,21 +364,32 @@ \label{sec-8} In this tutorial, we have, \begin{itemize} - \item Gained an understanding of the basic structure of a LaTeX document, its various document classes and loading packages that add new features to - \item the LaTeX system. + \item Understood the basic structure of a LaTeX document, + its various document classes and loading packages that add new features to + the LaTeX system \item Created a LaTeX document with a title and an abstract. - \item Created both numbered and non-numbered sections and subsections in a LaTeX document. - \item Created an appendix in a LaTeX document. - \item Created a table of content in a LaTeX document. \end{itemize} \end{frame} \begin{frame}[fragile] - \frametitle{\typ{Self assessment questions}} + \frametitle{\typ{Summary}..} + \begin{itemize} + \item Created both numbered and non-numbered sections and subsections in a + LaTeX document + \item Created an appendix in a LaTeX document + \item Created a table of content in a LaTeX document + \end{itemize} +\end{frame} + + +\begin{frame}[fragile] + \frametitle{\typ{Self assessment}} \label{sec-9} {\footnotesize \begin{enumerate} - \item Is the LaTeX code given below a valid input file (File compiles successfully and produces the intended result, that is to produce a book with two chapters and an appendix. + \item Is the LaTeX code given below a valid input file + (File compiles successfully and produces the intended result, + that is to produce a book with two chapters and an appendix) {\tiny \begin{center} \begin{verbatim} @@ -400,23 +409,76 @@ \end{verbatim} \end{center} } - \item subsection command can be placed at any arbitrary level. If they get numbered by default using the appropriate setcounter command and secnumdepth parameter, do they automatically appear in the table of content ?? - \end{enumerate} + \end{enumerate} } \end{frame} \begin{frame}[fragile] -\frametitle{\typ{Solutions}} +\frametitle{\typ{Solution}} \label{sec-10} \begin{enumerate} -\item Although the given file looks syntactically valid, the output file is not what we expected. This is mainly because we are trying to use the section command to create sections in the appendix, for a document whose type is given as a book. +\item Although the given file looks syntactically valid, the output file is not + what we expected. This is mainly because we are trying to use the section + command to create sections in the appendix, for a document whose type is + given as a book. \vspace{15pt} -\item No, the \textbackslash tableofcontents command normally shows only numbered section headings, and only down to the level defined by the tocdepth counter. \end{enumerate} \end{frame} \begin{frame} +\frametitle{SDES \& FOSSEE} +\begin{center} +\begin{itemize} +\item \small{SDES}\\ +\small{\color{LimeGreen}Software Development techniques for +Engineers and Scientists} \\ +\scriptsize An initiative by FOSSEE. \\ +\vspace{3pt} +\scriptsize For more information on SDES, please visit +{\color{blue}\url{http://fossee.in/sdes}}\\ +\vspace{12pt} +\item \small{FOSSEE}\\ +\small {\color{LimeGreen}Free and Open-source Software for \\ +Science and Engineering Education} \\ +\scriptsize Based at IIT Bombay, Funded by MHRD.\\ +\vspace{3pt} +\scriptsize Part of National Mission on Education through ICT (NME-ICT) \\ +\end{itemize} +\end{center} +\end{frame} +\begin{frame} +\frametitle{About the Spoken Tutorial Project} +\begin{itemize} +\item Watch the video available at {\color{blue}\url{http://spoken-tutorial.org + /What\_is\_a\_Spoken\_Tutorial}} +\item It summarises the Spoken Tutorial project +\item If you do not have good bandwidth, you can download and watch it +\end{itemize} +\end{frame} + +\begin{frame} +\frametitle{Spoken Tutorial Workshops}The Spoken Tutorial Project Team +\begin{itemize} +\item Conducts workshops using spoken tutorials +\item Gives certificates to those who pass an online test +\item For more details, please write to \\ \hspace {0.5cm} +{\color{blue}contact@spoken-tutorial.org} +\end{itemize} +\end{frame} + +\begin{frame} +\frametitle{Acknowledgements} +\begin{itemize} +\item Spoken Tutorial Project is a part of the Talk to a Teacher project +\item It is supported by the National Mission on Education through ICT, MHRD, +Government of India +\item More information on this Mission is available at: \\ +{\color{blue}\url{http://spoken-tutorial.org/NMEICT-Intro}} +\end{itemize} +\end{frame} + +\begin{frame} \begin{block}{} \begin{center} {\Large THANK YOU!} @@ -429,7 +491,6 @@ \end{center} \end{block} \end{frame} - \end{document} diff --git a/Latex/Latex3/latex_basics_and_structure_script.rst b/Latex/Latex3/latex_basics_and_structure_script.rst index 68aa33d..23d4688 100644 --- a/Latex/Latex3/latex_basics_and_structure_script.rst +++ b/Latex/Latex3/latex_basics_and_structure_script.rst @@ -19,37 +19,35 @@ Hello friends and welcome to the tutorial on "LaTeX: Basics & Structure". At the end of this tutorial, you will be able to, 1. Understand basic structure of a LaTeX document, its various document - classes and loading packages that add new features to the LaTeX system. -#. Create a LaTeX document with a title and an abstract. + classes and loading packages that add new features to the LaTeX system +#. Create a LaTeX document with a title and an abstract -.. L2 +.. L3 {{{ Show the "Objectives.." slide }}} -.. R2 - -At the end of this tutorial, you will be able to +.. R3 3. Create numbered and non-numbered, sections and subsections in a LaTeX - document. -#. Create an appendix in a LaTeX document. -#. Create a table of content in a LaTeX document. + document +#. Create an appendix in a LaTeX document +#. Create a table of content in a LaTeX document -.. L3 +.. L4 {{{ Show the "Pre-requisite" slide }}} -.. R3 +.. R4 Before beginning this tutorial, we would suggest having a working installation of LaTeX and also complete the tutorial "Introduction to LaTeX". -.. L4 +.. L5 {{{ Show the "A Very Basic LaTeX document" slide }}} -.. R4 +.. R5 We begin this tutorial with an example introduced in the previous tutorial. The text in the document is illustrative and can be replaced by a @@ -60,7 +58,7 @@ of text. In our minimal example, document is an environment. Only the text enclosed by the begin and end commands is effected by the environment. The part of the file -before the \begin{document} command is called the preamble, and is used to +before the <\\begin{document}> command is called the preamble, and is used to "configure" the LaTeX typesetter and change various parameters for typesetting. In our current example, the preamble is empty. We will add preamble content in the later part of the tutorial. @@ -68,46 +66,43 @@ in the later part of the tutorial. We will now see in the first line of the example we just showed, the <\\documentclass{article}> command. -.. L5 - -{{{ Show the "documentclass command" slide }}} - -.. R5 - -documentclass article, which more generally can be written as - .. L6 -{{{ Show the "documentclass command ..." slide }}} +{{{ Show the "documentclass command" slide }}} .. R6 -documentclass parameters DocumentClass. -Where documentclass is a LaTeX command. +A LaTeX document starts with the command <\\documentclass[option]{type}>. +It is used to select the class of our document. The various classes that we can +select for our document are "article", "proc", "report", "book", "slides", +"letter". The supported classes have a few differences, in how the content +of the document is typeset. +<\\documentclass> command can take various parameters also. Parameters specify if you want to use a non default font size, for example. More specifically the parameters can be used to alter things like font size of the document, paper size, two sided or single sided printing, etc, for each class, that is supported by LaTeX. -The supported classes have a few differences, in how the content of the document -is typeset. .. L7 -{{{ Show the "documentclass command: A Closer look" slide }}} +{{{ Show the "documentclass command.." slide }}} .. R7 We now look at a hypothetical documentclass command. -The command being shown on the screen, instructs LaTeX to -Create a new document of class report. The available classes are article, proc, -report, book, slides and letter. -12 pt: sets the font size of main font. Other are relatively adjusted. 10pt is +The command being shown on the screen, instructs LaTeX to Create a new +document of class report. +Optional Parameters, +"12 pt" sets the font size of main font. Other are relatively adjusted. 10pt is the default. -a4paper: specifies the paper size -draft: marks hyphenation and justification problems in typesetting -with a square in the margin. -makes LaTeX indicate hyphenation and justification problems with a small square in the right-hand margin of the problem line so they can be located quickly by a human. It also suppresses the inclusion of images and shows only a frame where they would normally occur. +"a4paper" specifies the paper size. +"draft" marks hyphenation and justification problems in typesetting with a +square in the margin & makes LaTeX indicate hyphenation and justification +problems with a small square in the right-hand margin of the problem line so +they can be located quickly by a human. +It also suppresses the inclusion of images and shows only a frame where +they would normally occur. .. L8 @@ -115,11 +110,11 @@ makes LaTeX indicate hyphenation and justification problems with a small square .. R8 -The usepackage command is called with package name argument, prepended with +The <\\usepackage> command is called with package name argument, prepended with optional parameters. It is included optionally in a LaTeX document, to include packages, which further extend the LaTeX's capabilities. There are a number of -packages that are included by default with LaTeX2 base distribution. You can use -the texdoc command for accessing package documentation. +packages that are included by default with LaTeX2 base distribution. You can +use the <texdoc> command for accessing package documentation. .. L9 @@ -127,21 +122,25 @@ the texdoc command for accessing package documentation. .. R9 -We add the title, the author and the date to the document before the -\begin{document} directive. We compile the document to see if the details -appear in the document, but they do not. +Now let us see how to add top matter like title, author name and the date to +the document. We add these before the <\\begin{document}> directive. +<\\title{}> command is used to add title to our document, similarly, +<\\author{}> is used to add the author name & <\\date{}> command adds the +current date to our document. We then compile the document to see if the +details appear in the document, but they do not. .. L10 -{{{ Show the "Top Matter ..." slide }}} +{{{ Show the "Top Matter.." slide }}} .. R10 -The command \maketitle adds title, authors name and date to the output file. -Of these only the date is optional. The date command can be called with an +The command <\\maketitle> adds title, author name and date to the output file. +Of these, only the date is optional. The date command can be called with an optional parameter. If the optional parameter is not provided, the date of compilation of the LaTeX document is used. The parameter, if specified is used -to override this value. +to override this value. The given example here will create a very simple +document with title, author name & date along with the written content. .. L11 @@ -149,167 +148,234 @@ to override this value. .. R11 -The abstract command is used to insert the abstract of a document, into the -output file.Place it in the location, where you want your abstract to present -in the document. It is available for the document classes article and report, +The abstract environment is used to insert the abstract of a document, into the +output file. The content that we require as the abstract is placed between +<\\begin{abstract}> & <\\end{abstract}> command. +Place it in the location, where you want your abstract to present in the +document. It is available for the document classes article and report, but not for the book class. .. L12 -{{{ Show the "Sectioning" slide }}} +{{{ Show the "abstract command".. slide }}} .. R12 -Titles chapters and sections are used to help the user find his or her way -through your work. The following commands are available in the article class: -section, subsection, subsubsection, paragraph and sub paragraph. The default -behavior is to use numbered sections. We can use un-numbered sections by -appending * to section command. If you want to split your document without -influencing the section or chapter numbering, use the part command. +Given here is a simple latex document with abstract and other top matter. .. L13 -{{{ Show the "Creating Chapters" slide }}} +{{{ Show the "Sectioning" slide }}} .. R13 -Longer documents can use report or book class. We can add a new chapter using -the chapter command, provided by the report or book class. After compiling the -file shown in the slide we notice that subsections are not numbered. +Titles, chapters and sections are used to help the user find his or her way +through your work. The following commands are available in the article class: +<\\section>, <\\subsection>, <\\subsubsection>. We can create either numbered +sections or un-numbered sections based on requirement. The default behavior is +to use numbered sections. We can use un-numbered sections by appending '*' +(star) to section command. If you want to split your document without +influencing the section or chapter numbering, use the part command. .. L14 -{{{ Show the "Sectioning and numbering" slide }}} +{{{ Show the "Sectioning".. slide }}} .. R14 -We can change this behavior with the setcounter command, calling it with -parameters shown on the slide. +Given here is an example of sectioning in Latex document. + .. L15 -{{{ Show the "Appendix" slide }}} +{{{ Show the "Creating Chapters" slide }}} .. R15 -Appendix can be added to the document using \appendix command. Any content -after the \appendix command will be added to the appendix. In the report or -book class, we have to use \chapter command to indicate that the chapters are -to be numbered as appendices. - -Similarly for the article class, we have to use the \section command to indicate -the sections that are to be numbered as appendices. +Longer documents can use report or book class. We can add a new chapter using +the <\\chapter> command, provided by the report or book class. Please keep in +mind that 'books' class in Latex do not have abstract environment. .. L16 -{{{ Show the "Table of Contents [TOC]" slide }}} +{{{ Show the "Creating Chapters".. slide }}} .. R16 -We use the \tableofcontents command to add a TOC to a document is and is placed -at the point at which the table of content is to be placed. It must be noted -that \tableofcontents command requires the LaTeX input file to be compiled -twice. On the first compilation only the "Contents" heading appears in the -document, but the actual table does not appear. LaTeX has now gone through -the input document and generated a temporary file (.toc), with the entries that -should go into the table of contents. When the input document is compiled for -the second time, these entries are made and the actual table will appear in -your output document. +Given here is as example to create chapters in our Latex document. +.. L17 + +{{{ Show the "Appendix" slide }}} + +.. R17 + +Appendix can be added to the document using <\\appendix> command. Any content +after the <\\appendix> command will be added to the appendix. In the report or +book class, we have to use <\\chapter> command to indicate that the chapters +are to be numbered as appendices. +Similarly for the article class, we have to use the <\\section> command to +indicate the sections that are to be numbered as appendices. + +.. L18 + +{{{ Show the "Table of Contents [TOC]" slide }}} + +.. R18 + +Now let us see how to add table of content in our document. +We use the <\\tableofcontents> command to add a TOC to a document is and is +placed at the point at which the table of content is to be placed. +It must be noted that <\\tableofcontents> command requires the LaTeX input file +to be compiled twice. On the first compilation only the "Contents" heading +appears in the document, but the actual table does not appear. +LaTeX has now gone through the input document and generated a temporary file +(.toc), with the entries that should go into the table of contents. +When the input document is compiled for the second time, these entries are made +and the actual table will appear in your output document. Note that any section/block that has been numbered automatically appears in the table of contents. It is possible to get un-numbered sections, for instance a Preface or a Foreword section to appear in the Table of Contents. -.. L17 +.. L19 -{{{ Show the "TOC ..." slide }}} +{{{ Show the "TOC.." slide }}} -.. R17 +.. R19 -Un-numbered sections are added to TOC using \addcontentsline command. -For example we use the addcontentsline command called with the parameters +Un-numbered sections are added to TOC using <\\addcontentsline> command. +For example we use the <\\addcontentsline> command called with the parameters "{toc}{section}{Intro}", for the text "Intro" to appear in the Table of contents. -.. L18 +.. L20 {{{ Show the "Exercise 1" slide }}} -.. R18 - -Write a LaTeX script that creates a document of type article, which contains -an appendix and a table of contents. The table of content should be at the -beginning of the document and the appendix at the end. +.. R20 -The book should contain two chapters, with the first chapter containing two -numbered and two un-numbered sections. The first un-numbered section should be -present in the table of content. +We have seen the structure & basics of a Latex document, here is an exercise +for you to perform. -Please pause the tutorial and check back for a possible solution +Write a LaTeX script that creates a document of type book, containing both a +TOC at the beginning and an appendix at the end of document. +The book should contain two chapters with numbered and un-numbered sections +these chapters should appear in the TOC. +Please pause the tutorial try out the excercise & resume for the solution. -.. L19 +.. L21 {{{continue from paused state}}} {{{ Show the "Excercise 1: Solution" slide }}} -.. R19 +.. R21 This slide on screen shows a possible valid solution to the given exercise. +Note that this file has to be compiled twice for the TOC contents to appear. -.. L20 + +.. L22 {{{ Show the "Summary" slide }}} -.. R20 +.. R22 This brings us to the end of this tutorial. In this tutorial, we have, -1. Gained an understanding of the basic structure of a LaTeX document, its +1. Understood the basic structure of a LaTeX document, its various document classes and loading packages that add new features to the LaTeX system. #. Created a LaTeX document with a title and an abstract. + + +.. L23 + +{{{ Show the "Summary.." slide }}} + +.. R23 + #. Created both numbered and non-numbered sections and subsections in a LaTeX document. #. Created an appendix in a LaTeX document. #. Created a table of content in a LaTeX document. -.. L21 -{{{ Show the "Self assessment questions" slide }}} +.. L24 -.. R21 +{{{ Show the "Self assessment" slide }}} -Here are some self assessment questions for you to solve +.. R24 - 1. Is the LaTeX code given below a valid input file (File compiles successfully -and produces the intended result, that is to produce a book with two chapters -and an appendix. +Here's a self assessment question for you to solve, - 2. subsection command can be placed at any arbitrary level. If they get -numbered by default using the appropriate setcounter command and secnumdepth -parameter, do they automatically appear in the table of content ?? +Is the LaTeX code given below a valid input file ? (File compiles successfully +and produces the intended result, that is to produce a book with two chapters +and an appendix) -.. L22 +.. L25 -{{{ Show the "Solutions" slide }}} +{{{ Show the "Solution" slide }}} -.. R22 +.. R25 -And the answers, +And the answer, 1. Although the given file looks syntactically valid, the output file is not what we expected. This is mainly because we are trying to use the section command to create sections in the appendix, for a document whose type is given as a book. -2. No, the \tableofcontents command normally shows only numbered section -headings, and only down to the level defined by the tocdepth counter. -.. L23 +.. L26 -{{{ Show the "Thank you" slide }}} +{{{ Show the SDES & FOSSEE slide }}} -.. R23 +.. R26 + +Software Development techniques for Engineers and Scientists - SDES, is an +initiative by FOSSEE. For more information, please visit the given link. + +Free and Open-source Software for Science and Engineering Education - FOSSEE, +is based at IIT Bombay which is funded by MHRD as part of National Mission on +Education through ICT. + +.. L27 + +{{{ Show the ``About the Spoken Tutorial Project'' slide }}} + +.. R27 + +Watch the video available at the following link. It summarises the Spoken +Tutorial project.If you do not have good bandwidth, you can download and +watch it. + +.. L28 + +{{{ Show the `` Spoken Tutorial Workshops'' slide }}} + +.. R28 + +The Spoken Tutorial Project Team conducts workshops using spoken tutorials, +gives certificates to those who pass an online test. + +For more details, contact contact@spoken-tutorial.org + +.. L29 + +{{{ Show the Acknowledgements slide }}} + +.. R29 + +Spoken Tutorial Project is a part of the "Talk to a Teacher" project. +It is supported by the National Mission on Education through ICT, MHRD, +Government of India. More information on this mission is available at the +given link. + +.. L30 + +{{{ Show the Thankyou slide }}} + +.. R30 Hope you have enjoyed this tutorial and found it useful. Thank you! |