CMSCOPE changed

1 files changed, 429 insertions, 0 deletions

diff --git a/usr/man/mann/toplevel.n b/usr/man/mann/toplevel.n
new file mode 100755
index 000000000..6bbdb74a2
--- /dev/null
+++ b/usr/man/mann/toplevel.n
@@ -0,0 +1,429 @@
+'\"
+'\" Copyright (c) 1990-1994 The Regents of the University of California.
+'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\" 
+.\" The -*- nroff -*- definitions below are for supplemental macros used
+.\" in Tcl/Tk manual entries.
+.\"
+.\" .AP type name in/out ?indent?
+.\"	Start paragraph describing an argument to a library procedure.
+.\"	type is type of argument (int, etc.), in/out is either "in", "out",
+.\"	or "in/out" to describe whether procedure reads or modifies arg,
+.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
+.\"	needed;  use .AS below instead)
+.\"
+.\" .AS ?type? ?name?
+.\"	Give maximum sizes of arguments for setting tab stops.  Type and
+.\"	name are examples of largest possible arguments that will be passed
+.\"	to .AP later.  If args are omitted, default tab stops are used.
+.\"
+.\" .BS
+.\"	Start box enclosure.  From here until next .BE, everything will be
+.\"	enclosed in one large box.
+.\"
+.\" .BE
+.\"	End of box enclosure.
+.\"
+.\" .CS
+.\"	Begin code excerpt.
+.\"
+.\" .CE
+.\"	End code excerpt.
+.\"
+.\" .VS ?version? ?br?
+.\"	Begin vertical sidebar, for use in marking newly-changed parts
+.\"	of man pages.  The first argument is ignored and used for recording
+.\"	the version when the .VS was added, so that the sidebars can be
+.\"	found and removed when they reach a certain age.  If another argument
+.\"	is present, then a line break is forced before starting the sidebar.
+.\"
+.\" .VE
+.\"	End of vertical sidebar.
+.\"
+.\" .DS
+.\"	Begin an indented unfilled display.
+.\"
+.\" .DE
+.\"	End of indented unfilled display.
+.\"
+.\" .SO ?manpage?
+.\"	Start of list of standard options for a Tk widget. The manpage
+.\"	argument defines where to look up the standard options; if
+.\"	omitted, defaults to "options". The options follow on successive
+.\"	lines, in three columns separated by tabs.
+.\"
+.\" .SE
+.\"	End of list of standard options for a Tk widget.
+.\"
+.\" .OP cmdName dbName dbClass
+.\"	Start of description of a specific option.  cmdName gives the
+.\"	option's name as specified in the class command, dbName gives
+.\"	the option's name in the option database, and dbClass gives
+.\"	the option's class in the option database.
+.\"
+.\" .UL arg1 arg2
+.\"	Print arg1 underlined, then print arg2 normally.
+.\"
+.\" .QW arg1 ?arg2?
+.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
+.\"
+.\" .PQ arg1 ?arg2?
+.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
+.\"	(for trailing punctuation) and then a closing parenthesis.
+.\"
+.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
+.if t .wh -1.3i ^B
+.nr ^l \n(.l
+.ad b
+.\"	# Start an argument description
+.de AP
+.ie !"\\$4"" .TP \\$4
+.el \{\
+.   ie !"\\$2"" .TP \\n()Cu
+.   el          .TP 15
+.\}
+.ta \\n()Au \\n()Bu
+.ie !"\\$3"" \{\
+\&\\$1 \\fI\\$2\\fP (\\$3)
+.\".b
+.\}
+.el \{\
+.br
+.ie !"\\$2"" \{\
+\&\\$1	\\fI\\$2\\fP
+.\}
+.el \{\
+\&\\fI\\$1\\fP
+.\}
+.\}
+..
+.\"	# define tabbing values for .AP
+.de AS
+.nr )A 10n
+.if !"\\$1"" .nr )A \\w'\\$1'u+3n
+.nr )B \\n()Au+15n
+.\"
+.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
+.nr )C \\n()Bu+\\w'(in/out)'u+2n
+..
+.AS Tcl_Interp Tcl_CreateInterp in/out
+.\"	# BS - start boxed text
+.\"	# ^y = starting y location
+.\"	# ^b = 1
+.de BS
+.br
+.mk ^y
+.nr ^b 1u
+.if n .nf
+.if n .ti 0
+.if n \l'\\n(.lu\(ul'
+.if n .fi
+..
+.\"	# BE - end boxed text (draw box now)
+.de BE
+.nf
+.ti 0
+.mk ^t
+.ie n \l'\\n(^lu\(ul'
+.el \{\
+.\"	Draw four-sided box normally, but don't draw top of
+.\"	box if the box started on an earlier page.
+.ie !\\n(^b-1 \{\
+\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.el \}\
+\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.\}
+.fi
+.br
+.nr ^b 0
+..
+.\"	# VS - start vertical sidebar
+.\"	# ^Y = starting y location
+.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
+.de VS
+.if !"\\$2"" .br
+.mk ^Y
+.ie n 'mc \s12\(br\s0
+.el .nr ^v 1u
+..
+.\"	# VE - end of vertical sidebar
+.de VE
+.ie n 'mc
+.el \{\
+.ev 2
+.nf
+.ti 0
+.mk ^t
+\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
+.sp -1
+.fi
+.ev
+.\}
+.nr ^v 0
+..
+.\"	# Special macro to handle page bottom:  finish off current
+.\"	# box/sidebar if in box/sidebar mode, then invoked standard
+.\"	# page bottom macro.
+.de ^B
+.ev 2
+'ti 0
+'nf
+.mk ^t
+.if \\n(^b \{\
+.\"	Draw three-sided box if this is the box's first page,
+.\"	draw two sides but no top otherwise.
+.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.\}
+.if \\n(^v \{\
+.nr ^x \\n(^tu+1v-\\n(^Yu
+\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
+.\}
+.bp
+'fi
+.ev
+.if \\n(^b \{\
+.mk ^y
+.nr ^b 2
+.\}
+.if \\n(^v \{\
+.mk ^Y
+.\}
+..
+.\"	# DS - begin display
+.de DS
+.RS
+.nf
+.sp
+..
+.\"	# DE - end display
+.de DE
+.fi
+.RE
+.sp
+..
+.\"	# SO - start of list of standard options
+.de SO
+'ie '\\$1'' .ds So \\fBoptions\\fR
+'el .ds So \\fB\\$1\\fR
+.SH "STANDARD OPTIONS"
+.LP
+.nf
+.ta 5.5c 11c
+.ft B
+..
+.\"	# SE - end of list of standard options
+.de SE
+.fi
+.ft R
+.LP
+See the \\*(So manual entry for details on the standard options.
+..
+.\"	# OP - start of full description for a single option
+.de OP
+.LP
+.nf
+.ta 4c
+Command-Line Name:	\\fB\\$1\\fR
+Database Name:	\\fB\\$2\\fR
+Database Class:	\\fB\\$3\\fR
+.fi
+.IP
+..
+.\"	# CS - begin code excerpt
+.de CS
+.RS
+.nf
+.ta .25i .5i .75i 1i
+..
+.\"	# CE - end code excerpt
+.de CE
+.fi
+.RE
+..
+.\"	# UL - underline word
+.de UL
+\\$1\l'|0\(ul'\\$2
+..
+.\"	# QW - apply quotation marks to word
+.de QW
+.ie '\\*(lq'"' ``\\$1''\\$2
+.\"" fix emacs highlighting
+.el \\*(lq\\$1\\*(rq\\$2
+..
+.\"	# PQ - apply parens and quotation marks to word
+.de PQ
+.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
+.\"" fix emacs highlighting
+.el (\\*(lq\\$1\\*(rq\\$2)\\$3
+..
+.\"	# QR - quoted range
+.de QR
+.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
+.\"" fix emacs highlighting
+.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
+..
+.\"	# MT - "empty" string
+.de MT
+.QW ""
+..
+.TH toplevel n 8.4 Tk "Tk Built-In Commands"
+.BS
+'\" Note:  do not modify the .SH NAME line immediately below!
+.SH NAME
+toplevel \- Create and manipulate toplevel widgets
+.SH SYNOPSIS
+\fBtoplevel\fR \fIpathName \fR?\fIoptions\fR?
+.SO
+\-borderwidth	\-highlightcolor	\-pady
+\-cursor	\-highlightthickness	\-relief
+\-highlightbackground	\-padx	\-takefocus
+.SE
+.SH "WIDGET-SPECIFIC OPTIONS"
+.OP \-background background Background
+This option is the same as the standard \fBbackground\fR option
+except that its value may also be specified as an empty string.
+In this case, the widget will display no background or border, and
+no colors will be consumed from its colormap for its background
+and border.
+.OP \-class class Class
+Specifies a class for the window.
+This class will be used when querying the option database for
+the window's other options, and it will also be used later for
+other purposes such as bindings.
+The \fBclass\fR option may not be changed with the \fBconfigure\fR
+widget command.
+.OP \-colormap colormap Colormap
+Specifies a colormap to use for the window.
+The value may be either \fBnew\fR, in which case a new colormap is
+created for the window and its children, or the name of another
+window (which must be on the same screen and have the same visual
+as \fIpathName\fR), in which case the new window will use the colormap
+from the specified window.
+If the \fBcolormap\fR option is not specified, the new window
+uses the default colormap of its screen.
+This option may not be changed with the \fBconfigure\fR
+widget command.
+.OP \-container container Container
+The value must be a boolean.  If true, it means that this window will
+be used as a container in which some other application will be embedded
+(for example, a Tk toplevel can be embedded using the \fB\-use\fR option).
+The window will support the appropriate window manager protocols for
+things like geometry requests.  The window should not have any
+children of its own in this application.
+This option may not be changed with the \fBconfigure\fR
+widget command.
+.OP \-height height Height
+Specifies the desired height for the window in any of the forms
+acceptable to \fBTk_GetPixels\fR.
+If this option is less than or equal to zero then the window will
+not request any size at all.
+.OP \-menu menu Menu
+Specifies a menu widget to be used as a menubar. On the Macintosh, the
+menubar will be displayed across the top of the main monitor. On
+Microsoft Windows and all UNIX platforms, the menu will appear across
+the toplevel window as part of the window dressing maintained by the
+window manager.
+.OP \-screen "" ""
+Specifies the screen on which to place the new window.
+Any valid screen name may be used, even one associated with a
+different display.
+Defaults to the same screen as its parent.
+This option is special in that it may not be specified via the option
+database, and it may not be modified with the \fBconfigure\fR
+widget command.
+.OP \-use use Use
+This option is used for embedding. If the value is not an empty string,
+it must be the window identifier of a container window, specified as
+a hexadecimal string like the ones returned by the \fBwinfo id\fR
+command. The toplevel widget will be created as a child of the given
+container instead of the root window for the screen.  If the container
+window is in a Tk application, it must be a frame or toplevel widget for
+which the \fB\-container\fR option was specified.
+This option may not be changed with the \fBconfigure\fR
+widget command.
+.OP \-visual visual Visual
+Specifies visual information for the new window in any of the
+forms accepted by \fBTk_GetVisual\fR.
+If this option is not specified, the new window will use the default
+visual for its screen.
+The \fBvisual\fR option may not be modified with the \fBconfigure\fR
+widget command.
+.OP \-width width Width
+Specifies the desired width for the window in any of the forms
+acceptable to \fBTk_GetPixels\fR.
+If this option is less than or equal to zero then the window will
+not request any size at all.
+.BE
+
+.SH DESCRIPTION
+.PP
+The \fBtoplevel\fR command creates a new toplevel widget (given
+by the \fIpathName\fR argument).  Additional
+options, described above, may be specified on the command line
+or in the option database
+to configure aspects of the toplevel such as its background color
+and relief.  The \fBtoplevel\fR command returns the
+path name of the new window.
+.PP
+A toplevel is similar to a frame except that it is created as a
+top-level window:  its X parent is the root window of a screen
+rather than the logical parent from its path name.  The primary
+purpose of a toplevel is to serve as a container for dialog boxes
+and other collections of widgets.  The only visible features
+of a toplevel are its background color and an optional 3-D border
+to make the toplevel appear raised or sunken.
+
+.SH "WIDGET COMMAND"
+.PP
+The \fBtoplevel\fR command creates a new Tcl command whose
+name is the same as the path name of the toplevel's window.  This
+command may be used to invoke various
+operations on the widget.  It has the following general form:
+.CS
+\fIpathName option \fR?\fIarg arg ...\fR?
+.CE
+\fIPathName\fR is the name of the command, which is the same as
+the toplevel widget's path name.  \fIOption\fR and the \fIarg\fRs
+determine the exact behavior of the command.  The following
+commands are possible for toplevel widgets:
+.TP
+\fIpathName \fBcget\fR \fIoption\fR
+Returns the current value of the configuration option given
+by \fIoption\fR.
+\fIOption\fR may have any of the values accepted by the \fBtoplevel\fR
+command.
+.TP
+\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+Query or modify the configuration options of the widget.
+If no \fIoption\fR is specified, returns a list describing all of
+the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
+information on the format of this list).  If \fIoption\fR is specified
+with no \fIvalue\fR, then the command returns a list describing the
+one named option (this list will be identical to the corresponding
+sublist of the value returned if no \fIoption\fR is specified).  If
+one or more \fIoption\-value\fR pairs are specified, then the command
+modifies the given widget option(s) to have the given value(s);  in
+this case the command returns an empty string.
+\fIOption\fR may have any of the values accepted by the \fBtoplevel\fR
+command.
+
+.SH BINDINGS
+.PP
+When a new toplevel is created, it has no default event bindings:
+toplevels are not intended to be interactive.
+
+.SH "SEE ALSO"
+frame(n)
+
+.SH KEYWORDS
+toplevel, widget
+
+'\" Local Variables:
+'\" mode: nroff
+'\" End: