CMSCOPE changed

1 files changed, 529 insertions, 0 deletions

diff --git a/usr/man/mann/radiobutton.n b/usr/man/mann/radiobutton.n
new file mode 100755
index 000000000..e8e20f8a7
--- /dev/null
+++ b/usr/man/mann/radiobutton.n
@@ -0,0 +1,529 @@
+'\"
+'\" Copyright (c) 1990-1994 The Regents of the University of California.
+'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\" 
+.\" The -*- nroff -*- definitions below are for supplemental macros used
+.\" in Tcl/Tk manual entries.
+.\"
+.\" .AP type name in/out ?indent?
+.\"	Start paragraph describing an argument to a library procedure.
+.\"	type is type of argument (int, etc.), in/out is either "in", "out",
+.\"	or "in/out" to describe whether procedure reads or modifies arg,
+.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
+.\"	needed;  use .AS below instead)
+.\"
+.\" .AS ?type? ?name?
+.\"	Give maximum sizes of arguments for setting tab stops.  Type and
+.\"	name are examples of largest possible arguments that will be passed
+.\"	to .AP later.  If args are omitted, default tab stops are used.
+.\"
+.\" .BS
+.\"	Start box enclosure.  From here until next .BE, everything will be
+.\"	enclosed in one large box.
+.\"
+.\" .BE
+.\"	End of box enclosure.
+.\"
+.\" .CS
+.\"	Begin code excerpt.
+.\"
+.\" .CE
+.\"	End code excerpt.
+.\"
+.\" .VS ?version? ?br?
+.\"	Begin vertical sidebar, for use in marking newly-changed parts
+.\"	of man pages.  The first argument is ignored and used for recording
+.\"	the version when the .VS was added, so that the sidebars can be
+.\"	found and removed when they reach a certain age.  If another argument
+.\"	is present, then a line break is forced before starting the sidebar.
+.\"
+.\" .VE
+.\"	End of vertical sidebar.
+.\"
+.\" .DS
+.\"	Begin an indented unfilled display.
+.\"
+.\" .DE
+.\"	End of indented unfilled display.
+.\"
+.\" .SO ?manpage?
+.\"	Start of list of standard options for a Tk widget. The manpage
+.\"	argument defines where to look up the standard options; if
+.\"	omitted, defaults to "options". The options follow on successive
+.\"	lines, in three columns separated by tabs.
+.\"
+.\" .SE
+.\"	End of list of standard options for a Tk widget.
+.\"
+.\" .OP cmdName dbName dbClass
+.\"	Start of description of a specific option.  cmdName gives the
+.\"	option's name as specified in the class command, dbName gives
+.\"	the option's name in the option database, and dbClass gives
+.\"	the option's class in the option database.
+.\"
+.\" .UL arg1 arg2
+.\"	Print arg1 underlined, then print arg2 normally.
+.\"
+.\" .QW arg1 ?arg2?
+.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
+.\"
+.\" .PQ arg1 ?arg2?
+.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
+.\"	(for trailing punctuation) and then a closing parenthesis.
+.\"
+.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
+.if t .wh -1.3i ^B
+.nr ^l \n(.l
+.ad b
+.\"	# Start an argument description
+.de AP
+.ie !"\\$4"" .TP \\$4
+.el \{\
+.   ie !"\\$2"" .TP \\n()Cu
+.   el          .TP 15
+.\}
+.ta \\n()Au \\n()Bu
+.ie !"\\$3"" \{\
+\&\\$1 \\fI\\$2\\fP (\\$3)
+.\".b
+.\}
+.el \{\
+.br
+.ie !"\\$2"" \{\
+\&\\$1	\\fI\\$2\\fP
+.\}
+.el \{\
+\&\\fI\\$1\\fP
+.\}
+.\}
+..
+.\"	# define tabbing values for .AP
+.de AS
+.nr )A 10n
+.if !"\\$1"" .nr )A \\w'\\$1'u+3n
+.nr )B \\n()Au+15n
+.\"
+.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
+.nr )C \\n()Bu+\\w'(in/out)'u+2n
+..
+.AS Tcl_Interp Tcl_CreateInterp in/out
+.\"	# BS - start boxed text
+.\"	# ^y = starting y location
+.\"	# ^b = 1
+.de BS
+.br
+.mk ^y
+.nr ^b 1u
+.if n .nf
+.if n .ti 0
+.if n \l'\\n(.lu\(ul'
+.if n .fi
+..
+.\"	# BE - end boxed text (draw box now)
+.de BE
+.nf
+.ti 0
+.mk ^t
+.ie n \l'\\n(^lu\(ul'
+.el \{\
+.\"	Draw four-sided box normally, but don't draw top of
+.\"	box if the box started on an earlier page.
+.ie !\\n(^b-1 \{\
+\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.el \}\
+\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.\}
+.fi
+.br
+.nr ^b 0
+..
+.\"	# VS - start vertical sidebar
+.\"	# ^Y = starting y location
+.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
+.de VS
+.if !"\\$2"" .br
+.mk ^Y
+.ie n 'mc \s12\(br\s0
+.el .nr ^v 1u
+..
+.\"	# VE - end of vertical sidebar
+.de VE
+.ie n 'mc
+.el \{\
+.ev 2
+.nf
+.ti 0
+.mk ^t
+\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
+.sp -1
+.fi
+.ev
+.\}
+.nr ^v 0
+..
+.\"	# Special macro to handle page bottom:  finish off current
+.\"	# box/sidebar if in box/sidebar mode, then invoked standard
+.\"	# page bottom macro.
+.de ^B
+.ev 2
+'ti 0
+'nf
+.mk ^t
+.if \\n(^b \{\
+.\"	Draw three-sided box if this is the box's first page,
+.\"	draw two sides but no top otherwise.
+.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.\}
+.if \\n(^v \{\
+.nr ^x \\n(^tu+1v-\\n(^Yu
+\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
+.\}
+.bp
+'fi
+.ev
+.if \\n(^b \{\
+.mk ^y
+.nr ^b 2
+.\}
+.if \\n(^v \{\
+.mk ^Y
+.\}
+..
+.\"	# DS - begin display
+.de DS
+.RS
+.nf
+.sp
+..
+.\"	# DE - end display
+.de DE
+.fi
+.RE
+.sp
+..
+.\"	# SO - start of list of standard options
+.de SO
+'ie '\\$1'' .ds So \\fBoptions\\fR
+'el .ds So \\fB\\$1\\fR
+.SH "STANDARD OPTIONS"
+.LP
+.nf
+.ta 5.5c 11c
+.ft B
+..
+.\"	# SE - end of list of standard options
+.de SE
+.fi
+.ft R
+.LP
+See the \\*(So manual entry for details on the standard options.
+..
+.\"	# OP - start of full description for a single option
+.de OP
+.LP
+.nf
+.ta 4c
+Command-Line Name:	\\fB\\$1\\fR
+Database Name:	\\fB\\$2\\fR
+Database Class:	\\fB\\$3\\fR
+.fi
+.IP
+..
+.\"	# CS - begin code excerpt
+.de CS
+.RS
+.nf
+.ta .25i .5i .75i 1i
+..
+.\"	# CE - end code excerpt
+.de CE
+.fi
+.RE
+..
+.\"	# UL - underline word
+.de UL
+\\$1\l'|0\(ul'\\$2
+..
+.\"	# QW - apply quotation marks to word
+.de QW
+.ie '\\*(lq'"' ``\\$1''\\$2
+.\"" fix emacs highlighting
+.el \\*(lq\\$1\\*(rq\\$2
+..
+.\"	# PQ - apply parens and quotation marks to word
+.de PQ
+.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
+.\"" fix emacs highlighting
+.el (\\*(lq\\$1\\*(rq\\$2)\\$3
+..
+.\"	# QR - quoted range
+.de QR
+.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
+.\"" fix emacs highlighting
+.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
+..
+.\"	# MT - "empty" string
+.de MT
+.QW ""
+..
+.TH radiobutton n 4.4 Tk "Tk Built-In Commands"
+.BS
+'\" Note:  do not modify the .SH NAME line immediately below!
+.SH NAME
+radiobutton \- Create and manipulate radiobutton widgets
+.SH SYNOPSIS
+\fBradiobutton\fR \fIpathName \fR?\fIoptions\fR?
+.SO
+\-activebackground	\-disabledforeground	\-padx
+\-activeforeground	\-font	\-pady
+\-anchor	\-foreground	\-relief
+\-background	\-highlightbackground	\-takefocus
+\-bitmap	\-highlightcolor	\-text
+\-borderwidth	\-highlightthickness	\-textvariable
+\-compound	\-image	\-underline
+\-cursor	\-justify	\-wraplength
+.SE
+.SH "WIDGET-SPECIFIC OPTIONS"
+.OP \-command command Command
+Specifies a Tcl command to associate with the button.  This command
+is typically invoked when mouse button 1 is released over the button
+window.  The button's global variable (\fB\-variable\fR option) will
+be updated before the command is invoked.
+.OP \-height height Height
+Specifies a desired height for the button.
+If an image or bitmap is being displayed in the button then the value is in
+screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
+for text it is in lines of text.
+If this option is not specified, the button's desired height is computed
+from the size of the image or bitmap or text being displayed in it.
+.OP \-indicatoron indicatorOn IndicatorOn
+Specifies whether or not the indicator should be drawn.  Must be a
+proper boolean value.  If false, the \fBrelief\fR option is
+ignored and the widget's relief is always sunken if the widget is
+selected and raised otherwise.
+.OP \-selectcolor selectColor Background
+Specifies a background color to use when the button is selected.
+If \fBindicatorOn\fR is true then the color applies to the indicator.
+Under Windows, this color is used as the background for the indicator
+regardless of the select state.
+If \fBindicatorOn\fR is false, this color is used as the background
+for the entire widget, in place of \fBbackground\fR or \fBactiveBackground\fR,
+whenever the widget is selected.
+If specified as an empty string then no special color is used for
+displaying when the widget is selected.
+.OP \-offrelief offRelief OffRelief
+Specifies the relief for the checkbutton when the indicator is not drawn and
+the checkbutton is off.  The default value is
+.QW raised .
+By setting this option to
+.QW flat
+and setting \fB\-indicatoron\fR to false and \fB\-overrelief\fR to
+.QW raised ,
+the effect is achieved 
+of having a flat button that raises on mouse-over and which is
+depressed when activated.  This is the behavior typically exhibited by
+the Align-Left, Align-Right, and Center radiobuttons on the toolbar of a 
+word-processor, for example.
+.OP \-overrelief overRelief OverRelief
+Specifies an alternative relief for the radiobutton, to be used when the
+mouse cursor is over the widget.  This option can be used to make
+toolbar buttons, by configuring \fB\-relief flat \-overrelief
+raised\fR.  If the value of this option is the empty string, then no
+alternative relief is used when the mouse cursor is over the radiobutton.
+The empty string is the default value.
+.OP \-selectimage selectImage SelectImage
+Specifies an image to display (in place of the \fBimage\fR option)
+when the radiobutton is selected.
+This option is ignored unless the \fBimage\fR option has been
+specified.
+.OP \-state state State
+Specifies one of three states for the radiobutton:  \fBnormal\fR, \fBactive\fR,
+or \fBdisabled\fR.  In normal state the radiobutton is displayed using the
+\fBforeground\fR and \fBbackground\fR options.  The active state is
+typically used when the pointer is over the radiobutton.  In active state
+the radiobutton is displayed using the \fBactiveForeground\fR and
+\fBactiveBackground\fR options.  Disabled state means that the radiobutton
+should be insensitive:  the default bindings will refuse to activate
+the widget and will ignore mouse button presses.
+In this state the \fBdisabledForeground\fR and
+\fBbackground\fR options determine how the radiobutton is displayed.
+.OP \-tristateimage tristateImage TristateImage
+.VS 8.5
+Specifies an image to display (in place of the \fBimage\fR option)
+when the radiobutton is selected.
+This option is ignored unless the \fBimage\fR option has been
+specified.
+.VE 8.5
+.OP \-tristatevalue tristateValue Value
+.VS 8.5
+Specifies the value that causes the radiobutton to display the multi-value 
+selection, also known as the tri-state mode.  Defaults to
+.QW "" .
+.VE 8.5
+.OP \-value value Value
+Specifies value to store in the button's associated variable whenever
+this button is selected.
+.OP \-variable variable Variable
+Specifies the name of a global variable to set whenever this button is
+selected.  Changes in this variable also cause the button to select
+or deselect itself.
+Defaults to the value \fBselectedButton\fR.
+.OP \-width width Width
+Specifies a desired width for the button.
+If an image or bitmap is being displayed in the button, the value is in
+screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
+for text it is in characters.
+If this option is not specified, the button's desired width is computed
+from the size of the image or bitmap or text being displayed in it.
+.BE
+.SH DESCRIPTION
+.PP
+The \fBradiobutton\fR command creates a new window (given by the
+\fIpathName\fR argument) and makes it into a radiobutton widget.
+Additional
+options, described above, may be specified on the command line
+or in the option database
+to configure aspects of the radiobutton such as its colors, font,
+text, and initial relief.  The \fBradiobutton\fR command returns its
+\fIpathName\fR argument.  At the time this command is invoked,
+there must not exist a window named \fIpathName\fR, but
+\fIpathName\fR's parent must exist.
+.PP
+A radiobutton is a widget that displays a textual string, bitmap or image
+and a diamond or circle called an \fIindicator\fR.
+If text is displayed, it must all be in a single font, but it
+can occupy multiple lines on the screen (if it contains newlines
+or if wrapping occurs because of the \fBwrapLength\fR option) and
+one of the characters may optionally be underlined using the
+\fBunderline\fR option.  A radiobutton has
+all of the behavior of a simple button: it can display itself in either
+of three different ways, according to the \fBstate\fR option;
+it can be made to appear
+raised, sunken, or flat; it can be made to flash; and it invokes
+a Tcl command whenever mouse button 1 is clicked over the
+check button.
+.PP
+In addition, radiobuttons can be \fIselected\fR.
+If a radiobutton is selected, the indicator is normally
+drawn with a selected appearance, and
+a Tcl variable associated with the radiobutton is set to a particular
+value (normally 1).
+Under Unix, the indicator is drawn with a sunken relief and a special
+color.  Under Windows, the indicator is drawn with a round mark inside.
+If the radiobutton is not selected, then the indicator is drawn with a
+deselected appearance, and the associated variable is
+set to a different value (typically 0).
+The indicator is drawn without a round mark inside.
+Typically, several radiobuttons share a single variable and the
+value of the variable indicates which radiobutton is to be selected.
+When a radiobutton is selected it sets the value of the variable to
+indicate that fact;  each radiobutton also monitors the value of
+the variable and automatically selects and deselects itself when the
+variable's value changes.
+.VS 8.5
+If the variable's value matches the \fBtristateValue\fR, then the radiobutton is 
+drawn using the tri-state mode.  This mode is used to indicate mixed or 
+multiple values.  (This is used when the radiobutton represents the state 
+of multiple items.)
+.VE 8.5
+By default the variable \fBselectedButton\fR
+is used;  its contents give the name of the button that is
+selected, or the empty string if no button associated with that
+variable is selected.
+The name of the variable for a radiobutton,
+plus the variable to be stored into it, may be modified with options
+on the command line or in the option database.
+Configuration options may also be used to modify the way the
+indicator is displayed (or whether it is displayed at all).
+By default a radiobutton is configured to select itself on button clicks.
+.SH "WIDGET COMMAND"
+.PP
+The \fBradiobutton\fR command creates a new Tcl command whose
+name is \fIpathName\fR.  This
+command may be used to invoke various
+operations on the widget.  It has the following general form:
+.CS
+\fIpathName option \fR?\fIarg arg ...\fR?
+.CE
+\fIOption\fR and the \fIarg\fRs
+determine the exact behavior of the command.  The following
+commands are possible for radiobutton widgets:
+.TP
+\fIpathName \fBcget\fR \fIoption\fR
+Returns the current value of the configuration option given
+by \fIoption\fR.
+\fIOption\fR may have any of the values accepted by the \fBradiobutton\fR
+command.
+.TP
+\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+Query or modify the configuration options of the widget.
+If no \fIoption\fR is specified, returns a list describing all of
+the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
+information on the format of this list).  If \fIoption\fR is specified
+with no \fIvalue\fR, the command returns a list describing the
+one named option (this list will be identical to the corresponding
+sublist of the value returned if no \fIoption\fR is specified).  If
+one or more \fIoption\-value\fR pairs are specified, the command
+modifies the given widget option(s) to have the given value(s);  in
+this case the command returns an empty string.
+\fIOption\fR may have any of the values accepted by the \fBradiobutton\fR
+command.
+.TP
+\fIpathName \fBdeselect\fR
+Deselects the radiobutton and sets the associated variable to an
+empty string.
+If this radiobutton was not currently selected, the command has
+no effect.
+.TP
+\fIpathName \fBflash\fR
+Flashes the radiobutton.  This is accomplished by redisplaying the radiobutton
+several times, alternating between active and normal colors.  At
+the end of the flash the radiobutton is left in the same normal/active
+state as when the command was invoked.
+This command is ignored if the radiobutton's state is \fBdisabled\fR.
+.TP
+\fIpathName \fBinvoke\fR
+Does just what would have happened if the user invoked the radiobutton
+with the mouse: selects the button and invokes
+its associated Tcl command, if there is one.
+The return value is the return value from the Tcl command, or an
+empty string if there is no command associated with the radiobutton.
+This command is ignored if the radiobutton's state is \fBdisabled\fR.
+.TP
+\fIpathName \fBselect\fR
+Selects the radiobutton and sets the associated variable to the
+value corresponding to this widget.
+.SH BINDINGS
+.PP
+Tk automatically creates class bindings for radiobuttons that give them
+the following default behavior:
+.IP [1]
+On Unix systems, a radiobutton activates whenever the mouse passes
+over it and deactivates whenever the mouse leaves the radiobutton.  On
+Mac and Windows systems, when mouse button 1 is pressed over a
+radiobutton, the button activates whenever the mouse pointer is inside
+the button, and deactivates whenever the mouse pointer leaves the
+button.
+.IP [2]
+When mouse button 1 is pressed over a radiobutton it is invoked (it
+becomes selected and the command associated with the button is
+invoked, if there is one).
+.IP [3]
+When a radiobutton has the input focus, the space key causes the radiobutton
+to be invoked.
+.PP
+If the radiobutton's state is \fBdisabled\fR then none of the above
+actions occur:  the radiobutton is completely non-responsive.
+.PP
+The behavior of radiobuttons can be changed by defining new bindings for
+individual widgets or by redefining the class bindings.
+.SH "SEE ALSO"
+checkbutton(n), labelframe(n), listbox(n), options(n), scale(n), ttk::radiobutton(n)
+.SH KEYWORDS
+radiobutton, widget