1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
|
/*
* Copyright 2010 Free Software Foundation, Inc.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "adf4350.h"
#include "adf4350_regs.h"
#include "db_wbxng.h"
#include <spi.h>
#include <hal_io.h>
#include <stdio.h>
#include <stdint.h>
#define INPUT_REF_FREQ U2_DOUBLE_TO_FXPT_FREQ(50e6)
#define INPUT_REF_FREQ_2X (2*INPUT_REF_FREQ) /* input ref freq with doubler turned on */
#define MAX_RF_DIV UINT8_C(16) /* max rf divider, divides rf output */
#define MIN_VCO_FREQ U2_DOUBLE_TO_FXPT_FREQ(2.2e9) /* minimum vco freq */
#define MAX_VCO_FREQ U2_DOUBLE_TO_FXPT_FREQ(4.4e9) /* minimum vco freq */
#define MAX_FREQ MAX_VCO_FREQ /* upper bound freq (rf div = 1) */
#define MIN_FREQ DIV_ROUND(MIN_VCO_FREQ, MAX_RF_DIV) /* calculated lower bound freq */
u2_fxpt_freq_t adf4350_get_max_freq(void){
return MAX_FREQ;
}
u2_fxpt_freq_t adf4350_get_min_freq(void){
return MIN_FREQ;
}
void adf4350_init(struct db_base *dbb){
struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
/* Initialize the pin levels. */
hal_gpio_write( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK, PLL_CE, PLL_CE );
adf4350_enable(true, dbb);
/* Initialize the registers. */
adf4350_load_register(5, dbb);
adf4350_load_register(4, dbb);
adf4350_load_register(3, dbb);
adf4350_load_register(2, dbb);
adf4350_load_register(1, dbb);
adf4350_load_register(0, dbb);
}
/*
void adf4350_update(void){
// mirror the lock detect pin to the led debug
if (adf4350_get_locked()){
io_set_pin(led_pin);
}else{
io_clear_pin(led_pin);
}
}
*/
bool adf4350_get_locked(struct db_base *dbb){
struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
int pins;
pins = hal_gpio_read( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK );
if(pins & PLL_LOCK_DETECT)
return true;
return false;
}
void adf4350_enable(bool enable, struct db_base *dbb){
struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
if (enable){ /* chip enable */
hal_gpio_write( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK, PLL_PDBRF, PLL_PDBRF );
}else{
hal_gpio_write( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK, 0, PLL_PDBRF );
}
}
void adf4350_write(uint8_t addr, uint32_t data, struct db_base *dbb){
struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
//printf("SPI write ADDR 0x%x, WORD 0x%x\n", (int) (addr), (int) (data));
data |= addr;
spi_transact(SPI_TXONLY,db->common.spi_mask,data,32,SPIF_PUSH_FALL);
//spi_read_write(clk_pin, data_pin, ld_pin, &data, 32);
/* pulse latch */
//io_set_pin(le_pin);
//io_clear_pin(le_pin);
}
bool adf4350_set_freq(u2_fxpt_freq_t freq, struct db_base *dbb){
struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
/* Set the frequency by setting int, frac, mod, r, div */
if (freq > MAX_FREQ || freq < MIN_FREQ) return false;
/* Set the prescaler and the min N based on the freq. */
uint16_t min_int_div;
if (freq > U2_DOUBLE_TO_FXPT_FREQ(3e9) ){
db->common.adf4350_regs_prescaler = (uint8_t) 1;
min_int_div = UINT16_C(75);
}else{
db->common.adf4350_regs_prescaler = (uint8_t) 0;
min_int_div = UINT16_C(23);
}
/* Ramp up the RF divider until the VCO is within range. */
db->common.adf4350_regs_divider_select = (uint8_t) 0;
while (freq < MIN_VCO_FREQ){
freq <<= 1; //double the freq
db->common.adf4350_regs_divider_select++; //double the divider
}
/* Ramp up the R divider until the N divider is at least the minimum. */
db->common.adf4350_regs_10_bit_r_counter = (uint16_t) (DIV_ROUND((INPUT_REF_FREQ*min_int_div), freq));
//printf("Initial R setting: %u, MIN_INT: %u\n", db->common.adf4350_regs_10_bit_r_counter, min_int_div);
if (db->common.adf4350_regs_10_bit_r_counter * U2_DOUBLE_TO_FXPT_FREQ(32e6) < INPUT_REF_FREQ){
db->common.adf4350_regs_10_bit_r_counter = (uint16_t) (DIV_ROUND(INPUT_REF_FREQ, U2_DOUBLE_TO_FXPT_FREQ(32e6)));
//printf("Updating R setting: %u, MIN_INT: %u\n", db->common.adf4350_regs_10_bit_r_counter, min_int_div);
}
db->common.adf4350_regs_10_bit_r_counter--;
//db->common.adf4350_regs_10_bit_r_counter=1;
do{
db->common.adf4350_regs_10_bit_r_counter++;
/* throw out some fractional bits in freq to avoid overflow */
u2_fxpt_freq_t some_frac_freq = (U2_DOUBLE_TO_FXPT_FREQ(1.0)/db->common.adf4350_regs_mod);
uint64_t n_mod = DIV_ROUND(freq, some_frac_freq);
n_mod *= db->common.adf4350_regs_10_bit_r_counter;
n_mod *= db->common.adf4350_regs_mod;
n_mod = DIV_ROUND(n_mod, DIV_ROUND(INPUT_REF_FREQ, some_frac_freq));
/* calculate int and frac: regs_mod is a power of 2, this will optimize to a bitwise operation */
db->common.adf4350_regs_int = (uint16_t) (n_mod/db->common.adf4350_regs_mod);
db->common.adf4350_regs_frac = (uint16_t) (n_mod%db->common.adf4350_regs_mod);
//printf("Int %u < Min %u\n", db->common.adf4350_regs_int, min_int_div);
}while(db->common.adf4350_regs_int < min_int_div);
/* calculate the band select so PFD is under 125 KHz */
db->common.adf4350_regs_8_bit_band_select_clock_divider_value = \
(uint8_t) (INPUT_REF_FREQ/(U2_DOUBLE_TO_FXPT_FREQ(30e3)*db->common.adf4350_regs_10_bit_r_counter)) + 1;
/*
printf(
"VCO %u KHz, Int %u, Frac %u, Mod %u, R %u, Div %u, BandSelect %u\n",
(uint32_t) ((freq >> U2_FPF_RP)/1000),
(uint32_t) db->common.adf4350_regs_int,
(uint32_t) db->common.adf4350_regs_frac,
(uint32_t) db->common.adf4350_regs_mod,
(uint32_t) db->common.adf4350_regs_10_bit_r_counter,
(uint32_t) (1 << db->common.adf4350_regs_divider_select),
(uint32_t) db->common.adf4350_regs_8_bit_band_select_clock_divider_value
);
*/
/* load involved registers */
adf4350_load_register(5, dbb);
adf4350_load_register(3, dbb);
adf4350_load_register(1, dbb);
adf4350_load_register(2, dbb);
adf4350_load_register(4, dbb);
adf4350_load_register(0, dbb); /* register 0 must be last */
return true;
}
u2_fxpt_freq_t adf4350_get_freq(struct db_base *dbb){
struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
/* Calculate the freq from int, frac, mod, ref, r, div:
* freq = (int + frac/mod) * (ref/r)
* Keep precision by doing multiplies first:
* freq = (((((((int)*mod) + frac)*ref)/mod)/r)/div)
*/
uint64_t temp;
temp = (uint64_t) db->common.adf4350_regs_int;
temp *= (uint64_t) db->common.adf4350_regs_mod;
temp += (uint64_t) db->common.adf4350_regs_frac;
temp *= (uint64_t) (INPUT_REF_FREQ >> U2_FPF_RP);
temp /= (uint64_t) db->common.adf4350_regs_mod;
temp /= (uint64_t) db->common.adf4350_regs_10_bit_r_counter;
temp /= (uint64_t) (1 << db->common.adf4350_regs_divider_select);
/* Shift 1Hz Radix Point for u2_fxpt_freq_t */
temp = temp << U2_FPF_RP;
/*
printf(
"Got Freq %u KHz, Int %u, Frac %u, Mod %u, R %u, Div %u\n",
(uint32_t) ((temp >> U2_FPF_RP)/1000),
(uint32_t) db->common.adf4350_regs_int,
(uint32_t) db->common.adf4350_regs_frac,
(uint32_t) db->common.adf4350_regs_mod,
(uint32_t) db->common.adf4350_regs_10_bit_r_counter,
(uint32_t) (1 << db->common.adf4350_regs_divider_select)
);
*/
return (u2_fxpt_freq_t) (temp);
}
|
