1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
|
/*
* Copyright 2007 Free Software Foundation, Inc.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "u2_init.h"
#include "memory_map.h"
#include "spi.h"
#include "hal_io.h"
#include "buffer_pool.h"
#include "pic.h"
#include "bool.h"
#include "ethernet.h"
#include "nonstdio.h"
#include "usrp2_eth_packet.h"
#include "memcpy_wa.h"
#include <stddef.h>
#include <stdlib.h>
// ----------------------------------------------------------------
static u2_mac_addr_t dst_mac_addr =
{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }};
// ----------------------------------------------------------------
#define PACKET_SIZE 1500 // bytes
#define ETH_DATA_RATE 1000000 // 1MB/s
#define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s
#define TIMER_RATE 100000000 // 100 MHz clock
static int timer_delta = TIMER_RATE/ETH_PACKET_RATE; // ticks between interrupts
static volatile bool send_packet_now = false; // timer handler sets this
static volatile bool link_is_up = false; // eth handler sets this
int packet_number = 0;
// ----------------------------------------------------------------
// debugging output on tx pins
#define LS_MASK 0xE0000
#define LS_1000 0x80000
#define LS_100 0x40000
#define LS_10 0x20000
/*
* Called when eth phy state changes (w/ interrupts disabled)
*/
void
link_changed_callback(int speed)
{
int v = 0;
switch(speed){
case 10:
v = LS_10;
link_is_up = true;
break;
case 100:
v = LS_100;
link_is_up = true;
break;
case 1000:
v = LS_100;
link_is_up = true;
break;
default:
v = 0;
link_is_up = false;
break;
}
//hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */
putstr("\neth link changed: speed = ");
puthex16_nl(speed);
}
void
timer_irq_handler(unsigned irq)
{
hal_set_timeout(timer_delta); // schedule next timeout
send_packet_now = 1;
}
void
buffer_irq_handler(unsigned irq)
{
// FIXME
}
static void
init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum)
{
int i = 0;
int mark = ((bufnum & 0xff) << 24) | 0x005A0000;
for (i = 0; i < BP_NLINES; i++){
buf[i] = mark | i;
mark ^= 0x00FF0000;
}
// copy header into buffer
memcpy_wa(buf, pkt, sizeof(*pkt));
}
static void
init_packets(void)
{
int i;
u2_eth_packet_t pkt __attribute__((aligned (4)));
pkt.ehdr.dst = dst_mac_addr;
// src filled in by mac
pkt.ehdr.ethertype = U2_ETHERTYPE;
// fill ALL buffers for debugging
for (i = 0; i < 8; i++)
init_packet((void *)buffer_ram(i), &pkt, i);
}
int
main(void)
{
u2_init();
int prev_leds = -1;
int new_leds = 0x00;
output_regs->leds = 0x00;
int peak_hold_count = 0;
// setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output
//hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111");
//hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111");
putstr("\nrcv_eth_packets\n");
init_packets();
// pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now
// FIXME turn off timer since I don't think MTS and MFS instructions are implemented
// pic_register_handler(IRQ_TIMER, timer_irq_handler);
// hal_set_timeout(timer_delta);
ethernet_register_link_changed_callback(link_changed_callback);
ethernet_init();
//eth_mac->speed = 4; // FIXME hardcode mac speed to 1000
// kick off a receive
bp_receive_to_buf(2, PORT_ETH, 1, 0, 511);
while(1){
// u2_eth_packet_t pkt;
new_leds = 0;
if (link_is_up)
new_leds = 0x2;
if ((buffer_pool_status->status & (BPS_DONE_2|BPS_ERROR_2)) != 0){
// we've got a packet!
#if 0
// copy to stack buffer so we can byte address it
memcpy_wa(&pkt, (void *)buffer_ram(2), sizeof(pkt));
putstr("Rx: src: ");
print_mac_addr(pkt.ehdr.dst_addr);
putstr(" dst: ");
print_mac_addr(pkt.ehdr.src_addr);
putstr(" ethtype: ");
puthex16(pkt.ehdr.ethertype);
putstr(" len: ");
int len = (buffer_pool_status->last_line[2] + 1) * 4;
puthex16_nl(len);
#else
volatile int *bp = buffer_ram(2);
int i;
for (i = 0; i < 16; i++){
puthex8(i);
putchar(':');
puthex32_nl(bp[i]);
}
#endif
// kick off next receive
bp_clear_buf(2);
bp_receive_to_buf(2, PORT_ETH, 1, 0, 511);
peak_hold_count = 2048 * 10;
}
if (peak_hold_count > 0){
peak_hold_count--;
new_leds |= 0x1;
}
if (new_leds != prev_leds){
prev_leds = new_leds;
output_regs->leds = new_leds;
}
}
hal_finish();
return 1;
}
|
