1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003,2004,2005,2006 Matt Ettus
// Copyright (C) 2006 Martin Dudok van Heel
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// Top level module for a full setup with DUCs and DDCs
// Define DEBUG_OWNS_IO_PINS if we're using the daughterboard i/o pins
// for debugging info. NB, This can kill the m'board and/or d'board if you
// have anything except basic d'boards installed.
// Uncomment the following to include optional circuitry
`include "usrp_multi.vh"
`include "../../../firmware/include/fpga_regs_common.v"
`include "../../../firmware/include/fpga_regs_standard.v"
module usrp_multi
(output MYSTERY_SIGNAL,
input master_clk,
input SCLK,
input SDI,
inout SDO,
input SEN_FPGA,
input FX2_1,
output FX2_2,
output FX2_3,
input wire [11:0] rx_a_a,
input wire [11:0] rx_b_a,
input wire [11:0] rx_a_b,
input wire [11:0] rx_b_b,
output wire [13:0] tx_a,
output wire [13:0] tx_b,
output wire TXSYNC_A,
output wire TXSYNC_B,
// USB interface
input usbclk,
input wire [2:0] usbctl,
output wire [1:0] usbrdy,
inout [15:0] usbdata, // NB Careful, inout
// These are the general purpose i/o's that go to the daughterboard slots
inout wire [15:0] io_tx_a,
inout wire [15:0] io_tx_b,
inout wire [15:0] io_rx_a,
inout wire [15:0] io_rx_b
);
wire [15:0] debugdata,debugctrl;
assign MYSTERY_SIGNAL = 1'b0;
wire clk64,clk128;
wire WR = usbctl[0];
wire RD = usbctl[1];
wire OE = usbctl[2];
wire have_space, have_pkt_rdy;
assign usbrdy[0] = have_space;
assign usbrdy[1] = have_pkt_rdy;
wire tx_underrun, rx_overrun;
wire clear_status = FX2_1;
assign FX2_2 = rx_overrun;
assign FX2_3 = tx_underrun;
wire [15:0] usbdata_out;
wire [3:0] dac0mux,dac1mux,dac2mux,dac3mux;
wire tx_realsignals;
wire [3:0] rx_numchan;
wire [2:0] tx_numchan;
wire [7:0] interp_rate, decim_rate;
wire [15:0] tx_debugbus, rx_debugbus;
wire enable_tx, enable_rx;
wire reset_data;
`ifdef MULTI_ON
wire sync_rx;
assign reset_data = sync_rx;
`else
assign reset_data = 1'b0;
`endif // `ifdef MULTI_ON
wire tx_dsp_reset, rx_dsp_reset, tx_bus_reset, rx_bus_reset;
wire [7:0] settings;
// Tri-state bus macro
bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) );
assign clk64 = master_clk;
wire [15:0] ch0tx,ch1tx,ch2tx,ch3tx; //,ch4tx,ch5tx,ch6tx,ch7tx;
wire [15:0] ch0rx,ch1rx,ch2rx,ch3rx,ch4rx,ch5rx,ch6rx,ch7rx;
// TX
wire [15:0] i_out_0,i_out_1,q_out_0,q_out_1;
wire [15:0] bb_tx_i0,bb_tx_q0,bb_tx_i1,bb_tx_q1; // bb_tx_i2,bb_tx_q2,bb_tx_i3,bb_tx_q3;
wire strobe_interp, tx_sample_strobe;
wire tx_empty;
wire serial_strobe;
wire [6:0] serial_addr;
wire [31:0] serial_data;
reg [15:0] debug_counter;
`ifdef COUNTER_32BIT_ON
reg [31:0] sample_counter_32bit;
`endif // `ifdef COUNTER_32BIT_ON
reg [15:0] loopback_i_0,loopback_q_0;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Transmit Side
`ifdef TX_ON
assign bb_tx_i0 = ch0tx;
assign bb_tx_q0 = ch1tx;
assign bb_tx_i1 = ch2tx;
assign bb_tx_q1 = ch3tx;
tx_buffer tx_buffer
( .usbclk(usbclk),.bus_reset(tx_bus_reset),.reset(tx_dsp_reset),
.usbdata(usbdata),.WR(WR),.have_space(have_space),.tx_underrun(tx_underrun),
.channels({tx_numchan,1'b0}),
.tx_i_0(ch0tx),.tx_q_0(ch1tx),
.tx_i_1(ch2tx),.tx_q_1(ch3tx),
.tx_i_2(),.tx_q_2(),
.tx_i_3(),.tx_q_3(),
.txclk(clk64),.txstrobe(strobe_interp),
.clear_status(clear_status),
.tx_empty(tx_empty),
.debugbus(tx_debugbus) );
tx_chain tx_chain_0
( .clock(clk64),.reset(tx_dsp_reset),.enable(enable_tx),
.interp_rate(interp_rate),.sample_strobe(tx_sample_strobe),
.interpolator_strobe(strobe_interp),.freq(),
.i_in(bb_tx_i0),.q_in(bb_tx_q0),.i_out(i_out_0),.q_out(q_out_0) );
tx_chain tx_chain_1
( .clock(clk64),.reset(tx_dsp_reset),.enable(enable_tx),
.interp_rate(interp_rate),.sample_strobe(tx_sample_strobe),
.interpolator_strobe(strobe_interp),.freq(),
.i_in(bb_tx_i1),.q_in(bb_tx_q1),.i_out(i_out_1),.q_out(q_out_1) );
setting_reg #(`FR_TX_MUX)
sr_txmux(.clock(clk64),.reset(tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),
.out({dac3mux,dac2mux,dac1mux,dac0mux,tx_realsignals,tx_numchan}));
wire [15:0] tx_a_a = dac0mux[3] ? (dac0mux[1] ? (dac0mux[0] ? q_out_1 : i_out_1) : (dac0mux[0] ? q_out_0 : i_out_0)) : 16'b0;
wire [15:0] tx_b_a = dac1mux[3] ? (dac1mux[1] ? (dac1mux[0] ? q_out_1 : i_out_1) : (dac1mux[0] ? q_out_0 : i_out_0)) : 16'b0;
wire [15:0] tx_a_b = dac2mux[3] ? (dac2mux[1] ? (dac2mux[0] ? q_out_1 : i_out_1) : (dac2mux[0] ? q_out_0 : i_out_0)) : 16'b0;
wire [15:0] tx_b_b = dac3mux[3] ? (dac3mux[1] ? (dac3mux[0] ? q_out_1 : i_out_1) : (dac3mux[0] ? q_out_0 : i_out_0)) : 16'b0;
wire txsync = tx_sample_strobe;
assign TXSYNC_A = txsync;
assign TXSYNC_B = txsync;
assign tx_a = txsync ? tx_b_a[15:2] : tx_a_a[15:2];
assign tx_b = txsync ? tx_b_b[15:2] : tx_a_b[15:2];
`endif // `ifdef TX_ON
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Receive Side
`ifdef RX_ON
wire rx_sample_strobe,strobe_decim,hb_strobe;
wire [15:0] bb_rx_i0,bb_rx_q0,bb_rx_i1,bb_rx_q1,
bb_rx_i2,bb_rx_q2,bb_rx_i3,bb_rx_q3;
wire loopback = settings[0];
wire counter = settings[1];
`ifdef COUNTER_32BIT_ON
wire counter_32bit = settings[2];
always @(posedge clk64)
if(rx_dsp_reset)
sample_counter_32bit <= #1 32'd0;
else if(~enable_rx | reset_data)
sample_counter_32bit <=#1 32'd0;
else if(hb_strobe)
sample_counter_32bit <=#1 sample_counter_32bit + 32'd1;
`endif // `ifdef COUNTER_32BIT_ON
always @(posedge clk64)
if(rx_dsp_reset)
debug_counter <= #1 16'd0;
else if(~enable_rx)
debug_counter <= #1 16'd0;
else if(hb_strobe)
debug_counter <=#1 debug_counter + 16'd2;
always @(posedge clk64)
if(strobe_interp)
begin
loopback_i_0 <= #1 ch0tx;
loopback_q_0 <= #1 ch1tx;
end
`ifdef COUNTER_32BIT_ON
assign ch0rx = counter_32bit?sample_counter_32bit[31:16]:counter ? debug_counter : loopback ? loopback_i_0 : bb_rx_i0;
assign ch1rx = counter_32bit?sample_counter_32bit[15:0]:counter ? debug_counter + 16'd1 : loopback ? loopback_q_0 : bb_rx_q0;
assign ch2rx = bb_rx_i1;
assign ch3rx = bb_rx_q1;
assign ch4rx = counter_32bit?bb_rx_i0:bb_rx_i2;
assign ch5rx = counter_32bit?bb_rx_q0:bb_rx_q2;// If using counter replicate channels here to be able to get rx_i0 when using counter
//This means if you use 4 channels that channel 3 will be replaced by channel 0
// and channel 0 will output the 32 bit counter.
assign ch6rx = bb_rx_i3;
assign ch7rx = bb_rx_q3;
`else
assign ch0rx = counter ? debug_counter : loopback ? loopback_i_0 : bb_rx_i0;
assign ch1rx = counter ? debug_counter + 16'd1 : loopback ? loopback_q_0 : bb_rx_q0;
assign ch2rx = bb_rx_i1;
assign ch3rx = bb_rx_q1;
assign ch4rx = bb_rx_i2;
assign ch5rx = bb_rx_q2;
assign ch6rx = bb_rx_i3;
assign ch7rx = bb_rx_q3;
`endif // `ifdef COUNTER_32BIT_ON
wire [15:0] ddc0_in_i,ddc0_in_q,ddc1_in_i,ddc1_in_q,ddc2_in_i,ddc2_in_q,ddc3_in_i,ddc3_in_q;
adc_interface adc_interface(.clock(clk64),.reset(rx_dsp_reset),.enable(1'b1),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.rx_a_a(rx_a_a),.rx_b_a(rx_b_a),.rx_a_b(rx_a_b),.rx_b_b(rx_b_b),
.ddc0_in_i(ddc0_in_i),.ddc0_in_q(ddc0_in_q),
.ddc1_in_i(ddc1_in_i),.ddc1_in_q(ddc1_in_q),
.ddc2_in_i(ddc2_in_i),.ddc2_in_q(ddc2_in_q),
.ddc3_in_i(ddc3_in_i),.ddc3_in_q(ddc3_in_q),.rx_numchan(rx_numchan) );
rx_buffer rx_buffer
( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset | reset_data),
.reset_regs(rx_dsp_reset),
.usbdata(usbdata_out),.RD(RD),.have_pkt_rdy(have_pkt_rdy),.rx_overrun(rx_overrun),
.channels(rx_numchan),
.ch_0(ch0rx),.ch_1(ch1rx),
.ch_2(ch2rx),.ch_3(ch3rx),
.ch_4(ch4rx),.ch_5(ch5rx),
.ch_6(ch6rx),.ch_7(ch7rx),
.rxclk(clk64),.rxstrobe(hb_strobe),
.clear_status(clear_status),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.debugbus(rx_debugbus) );
`ifdef RX_EN_0
rx_chain #(`FR_RX_FREQ_0,`FR_RX_PHASE_0) rx_chain_0
( .clock(clk64),.reset(reset_data),.enable(enable_rx),
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(hb_strobe),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.i_in(ddc0_in_i),.q_in(ddc0_in_q),.i_out(bb_rx_i0),.q_out(bb_rx_q0),.debugdata(debugdata),.debugctrl(debugctrl));
`else
assign bb_rx_i0=16'd0;
assign bb_rx_q0=16'd0;
`endif
`ifdef RX_EN_1
rx_chain #(`FR_RX_FREQ_1,`FR_RX_PHASE_1) rx_chain_1
( .clock(clk64),.reset(reset_data),.enable(enable_rx),
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.i_in(ddc1_in_i),.q_in(ddc1_in_q),.i_out(bb_rx_i1),.q_out(bb_rx_q1));
`else
assign bb_rx_i1=16'd0;
assign bb_rx_q1=16'd0;
`endif
`ifdef RX_EN_2
rx_chain #(`FR_RX_FREQ_2,`FR_RX_PHASE_2) rx_chain_2
( .clock(clk64),.reset(reset_data),.enable(enable_rx),
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.i_in(ddc2_in_i),.q_in(ddc2_in_q),.i_out(bb_rx_i2),.q_out(bb_rx_q2));
`else
assign bb_rx_i2=16'd0;
assign bb_rx_q2=16'd0;
`endif
`ifdef RX_EN_3
rx_chain #(`FR_RX_FREQ_3,`FR_RX_PHASE_3) rx_chain_3
( .clock(clk64),.reset(reset_data),.enable(enable_rx),
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.i_in(ddc3_in_i),.q_in(ddc3_in_q),.i_out(bb_rx_i3),.q_out(bb_rx_q3));
assign bb_rx_i3=16'd0;
assign bb_rx_q3=16'd0;
`endif
`endif // `ifdef RX_ON
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Control Functions
wire [31:0] capabilities;
assign capabilities[7] = `TX_CAP_HB;
assign capabilities[6:4] = `TX_CAP_NCHAN;
assign capabilities[3] = `RX_CAP_HB;
assign capabilities[2:0] = `RX_CAP_NCHAN;
serial_io serial_io
( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI),
.enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.readback_0({io_rx_a,io_tx_a}),.readback_1({io_rx_b,io_tx_b}),.readback_2(capabilities),.readback_3(32'hf0f0931a) );
wire [15:0] reg_0,reg_1,reg_2,reg_3;
`ifdef MULTI_ON
master_control_multi master_control
( .master_clk(clk64),.usbclk(usbclk),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.rx_slave_sync(io_rx_a[`bitnoFR_RX_SYNC_INPUT_IOPIN]),
.tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
.tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
.enable_tx(enable_tx),.enable_rx(enable_rx),
.sync_rx(sync_rx),
.interp_rate(interp_rate),.decim_rate(decim_rate),
.tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp),
.rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
.tx_empty(tx_empty),
//.debug_0(rx_a_a),.debug_1(ddc0_in_i),
.debug_0(rx_debugbus),.debug_1(ddc0_in_i),
.debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,tx_underrun,rx_overrun,decim_rate}),
.reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) );
`else //`ifdef MULTI_ON
master_control master_control
( .master_clk(clk64),.usbclk(usbclk),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
.tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
.tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
.enable_tx(enable_tx),.enable_rx(enable_rx),
.interp_rate(interp_rate),.decim_rate(decim_rate),
.tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp),
.rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
.tx_empty(tx_empty),
//.debug_0(rx_a_a),.debug_1(ddc0_in_i),
.debug_0(rx_debugbus),.debug_1(ddc0_in_i),
.debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,tx_underrun,rx_overrun,decim_rate}),
.reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) );
`endif //`ifdef MULTI_ON
io_pins io_pins
(.io_0(io_tx_a),.io_1(io_rx_a),.io_2(io_tx_b),.io_3(io_rx_b),
.reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3),
.clock(clk64),.rx_reset(rx_dsp_reset),.tx_reset(tx_dsp_reset),
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Misc Settings
setting_reg #(`FR_MODE) sr_misc(.clock(clk64),.reset(rx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(settings));
endmodule // usrp_multi
|
