1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// Interface to Cypress FX2 bus
// A packet is 512 Bytes. Each fifo line is 2 bytes
// Fifo has 1024 or 2048 lines
module tx_buffer
( input usbclk,
input bus_reset, // Used here for the 257-Hack to fix the FX2 bug
input reset, // standard DSP-side reset
input [15:0] usbdata,
input wire WR,
output wire have_space,
output reg tx_underrun,
input wire [3:0] channels,
output reg [15:0] tx_i_0,
output reg [15:0] tx_q_0,
output reg [15:0] tx_i_1,
output reg [15:0] tx_q_1,
output reg [15:0] tx_i_2,
output reg [15:0] tx_q_2,
output reg [15:0] tx_i_3,
output reg [15:0] tx_q_3,
input txclk,
input txstrobe,
input clear_status,
output wire tx_empty,
output [11:0] debugbus
);
wire [11:0] txfifolevel;
reg [8:0] write_count;
wire tx_full;
wire [15:0] fifodata;
wire rdreq;
reg [3:0] load_next;
// DAC Side of FIFO
assign rdreq = ((load_next != channels) & !tx_empty);
always @(posedge txclk)
if(reset)
begin
{tx_i_0,tx_q_0,tx_i_1,tx_q_1,tx_i_2,tx_q_2,tx_i_3,tx_q_3}
<= #1 128'h0;
load_next <= #1 4'd0;
end
else
if(load_next != channels)
begin
load_next <= #1 load_next + 4'd1;
case(load_next)
4'd0 : tx_i_0 <= #1 tx_empty ? 16'd0 : fifodata;
4'd1 : tx_q_0 <= #1 tx_empty ? 16'd0 : fifodata;
4'd2 : tx_i_1 <= #1 tx_empty ? 16'd0 : fifodata;
4'd3 : tx_q_1 <= #1 tx_empty ? 16'd0 : fifodata;
4'd4 : tx_i_2 <= #1 tx_empty ? 16'd0 : fifodata;
4'd5 : tx_q_2 <= #1 tx_empty ? 16'd0 : fifodata;
4'd6 : tx_i_3 <= #1 tx_empty ? 16'd0 : fifodata;
4'd7 : tx_q_3 <= #1 tx_empty ? 16'd0 : fifodata;
endcase // case(load_next)
end // if (load_next != channels)
else if(txstrobe & (load_next == channels))
begin
load_next <= #1 4'd0;
end
// USB Side of FIFO
assign have_space = (txfifolevel <= (4095-256));
always @(posedge usbclk)
if(bus_reset) // Use bus reset because this is on usbclk
write_count <= #1 0;
else if(WR & ~write_count[8])
write_count <= #1 write_count + 9'd1;
else
write_count <= #1 WR ? write_count : 9'b0;
// Detect Underruns
always @(posedge txclk)
if(reset)
tx_underrun <= 1'b0;
else if(txstrobe & (load_next != channels))
tx_underrun <= 1'b1;
else if(clear_status)
tx_underrun <= 1'b0;
// FIFO
fifo_4k txfifo
( .data ( usbdata ),
.wrreq ( WR & ~write_count[8] ),
.wrclk ( usbclk ),
.q ( fifodata ),
.rdreq ( rdreq ),
.rdclk ( txclk ),
.aclr ( reset ), // asynch, so we can use either
.rdempty ( tx_empty ),
.rdusedw ( ),
.wrfull ( tx_full ),
.wrusedw ( txfifolevel )
);
// Debugging Aids
assign debugbus[0] = WR;
assign debugbus[1] = have_space;
assign debugbus[2] = tx_empty;
assign debugbus[3] = tx_full;
assign debugbus[4] = tx_underrun;
assign debugbus[5] = write_count[8];
assign debugbus[6] = txstrobe;
assign debugbus[7] = rdreq;
assign debugbus[11:8] = load_next;
endmodule // tx_buffer
|
