1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
//
// This file is machine generated from fpga_regs_common.h
// Do not edit by hand; your edits will be overwritten.
//
// This file defines registers common to all FPGA configurations.
// Registers 0 to 31 are reserved for use in this file.
// The FPGA needs to know the rate that samples are coming from and
// going to the A/D's and D/A's. div = 128e6 / sample_rate
`define FR_TX_SAMPLE_RATE_DIV 7'd0
`define FR_RX_SAMPLE_RATE_DIV 7'd1
// 2 is available.
// 3 is available.
`define FR_MASTER_CTRL 7'd4 // master enable and reset controls
// i/o direction registers for pins that go to daughterboards.
// Setting the bit makes it an output from the FPGA to the d'board.
// top 16 is mask, low 16 is value
`define FR_OE_0 7'd5 // slot 0
`define FR_OE_1 7'd6
`define FR_OE_2 7'd7
`define FR_OE_3 7'd8
// i/o registers for pins that go to daughterboards.
// top 16 is a mask, low 16 is value
`define FR_IO_0 7'd9 // slot 0
`define FR_IO_1 7'd10
`define FR_IO_2 7'd11
`define FR_IO_3 7'd12
`define FR_MODE 7'd13
// If the corresponding bit is set, internal FPGA debug circuitry
// controls the i/o pins for the associated bank of daughterboard
// i/o pins. Typically used for debugging FPGA designs.
`define FR_DEBUG_EN 7'd14
// If the corresponding bit is set, enable the automatic DC
// offset correction control loop.
//
// The 4 low bits are significant:
//
// ADC0 = (1 << 0)
// ADC1 = (1 << 1)
// ADC2 = (1 << 2)
// ADC3 = (1 << 3)
//
// This control loop works if the attached daugherboard blocks DC.
// Currently all daughterboards do block DC. This includes:
// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
`define FR_DC_OFFSET_CL_EN 7'd15 // DC Offset Control Loop Enable
// offset corrections for ADC's and DAC's (2's complement)
`define FR_ADC_OFFSET_0 7'd16
`define FR_ADC_OFFSET_1 7'd17
`define FR_ADC_OFFSET_2 7'd18
`define FR_ADC_OFFSET_3 7'd19
// ------------------------------------------------------------------------
// Automatic Transmit/Receive switching
//
// If automatic transmit/receive (ATR) switching is enabled in the
// FR_ATR_CTL register, the presence or absence of data in the FPGA
// transmit fifo selects between two sets of values for each of the 4
// banks of daughterboard i/o pins.
//
// Each daughterboard slot has 3 16-bit registers associated with it:
// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
//
// FR_ATR_MASK_{0,1,2,3}:
//
// These registers determine which of the daugherboard i/o pins are
// affected by ATR switching. If a bit in the mask is set, the
// corresponding i/o bit is controlled by ATR, else it's output
// value comes from the normal i/o pin output register:
// FR_IO_{0,1,2,3}.
//
// FR_ATR_TXVAL_{0,1,2,3}:
// FR_ATR_RXVAL_{0,1,2,3}:
//
// If the Tx fifo contains data, then the bits from TXVAL that are
// selected by MASK are output. Otherwise, the bits from RXVAL that
// are selected by MASK are output.
`define FR_ATR_MASK_0 7'd20 // slot 0
`define FR_ATR_TXVAL_0 7'd21
`define FR_ATR_RXVAL_0 7'd22
`define FR_ATR_MASK_1 7'd23 // slot 1
`define FR_ATR_TXVAL_1 7'd24
`define FR_ATR_RXVAL_1 7'd25
`define FR_ATR_MASK_2 7'd26 // slot 2
`define FR_ATR_TXVAL_2 7'd27
`define FR_ATR_RXVAL_2 7'd28
`define FR_ATR_MASK_3 7'd29 // slot 3
`define FR_ATR_TXVAL_3 7'd30
`define FR_ATR_RXVAL_3 7'd31
|
