1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
|
/* -*- c++ -*- */
/*
* Copyright 2003,2004 Free Software Foundation, Inc.
*
* This file is part of GNU Radio
*
* GNU Radio is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* GNU Radio is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GNU Radio; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#ifndef INCLUDED_FPGA_REGS_COMMON_H
#define INCLUDED_FPGA_REGS_COMMON_H
// This file defines registers common to all FPGA configurations.
// Registers 0 to 31 are reserved for use in this file.
// The FPGA needs to know the rate that samples are coming from and
// going to the A/D's and D/A's. div = 128e6 / sample_rate
#define FR_TX_SAMPLE_RATE_DIV 0
#define FR_RX_SAMPLE_RATE_DIV 1
// 2 and 3 are defined in the ATR section
#define FR_MASTER_CTRL 4 // master enable and reset controls
# define bmFR_MC_ENABLE_TX (1 << 0)
# define bmFR_MC_ENABLE_RX (1 << 1)
# define bmFR_MC_RESET_TX (1 << 2)
# define bmFR_MC_RESET_RX (1 << 3)
// i/o direction registers for pins that go to daughterboards.
// Setting the bit makes it an output from the FPGA to the d'board.
// top 16 is mask, low 16 is value
#define FR_OE_0 5 // slot 0
#define FR_OE_1 6
#define FR_OE_2 7
#define FR_OE_3 8
// i/o registers for pins that go to daughterboards.
// top 16 is a mask, low 16 is value
#define FR_IO_0 9 // slot 0
#define FR_IO_1 10
#define FR_IO_2 11
#define FR_IO_3 12
#define FR_MODE 13
# define bmFR_MODE_NORMAL 0
# define bmFR_MODE_LOOPBACK (1 << 0) // enable digital loopback
# define bmFR_MODE_RX_COUNTING (1 << 1) // Rx is counting
# define bmFR_MODE_RX_COUNTING_32BIT (1 << 2) // Rx is counting with a 32 bit counter
// low and high 16 bits are multiplexed across channel I and Q
// If the corresponding bit is set, internal FPGA debug circuitry
// controls the i/o pins for the associated bank of daughterboard
// i/o pins. Typically used for debugging FPGA designs.
#define FR_DEBUG_EN 14
# define bmFR_DEBUG_EN_TX_A (1 << 0) // debug controls TX_A i/o
# define bmFR_DEBUG_EN_RX_A (1 << 1) // debug controls RX_A i/o
# define bmFR_DEBUG_EN_TX_B (1 << 2) // debug controls TX_B i/o
# define bmFR_DEBUG_EN_RX_B (1 << 3) // debug controls RX_B i/o
// If the corresponding bit is set, enable the automatic DC
// offset correction control loop.
//
// The 4 low bits are significant:
//
// ADC0 = (1 << 0)
// ADC1 = (1 << 1)
// ADC2 = (1 << 2)
// ADC3 = (1 << 3)
//
// This control loop works if the attached daugherboard blocks DC.
// Currently all daughterboards do block DC. This includes:
// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
#define FR_DC_OFFSET_CL_EN 15 // DC Offset Control Loop Enable
// offset corrections for ADC's and DAC's (2's complement)
#define FR_ADC_OFFSET_0 16
#define FR_ADC_OFFSET_1 17
#define FR_ADC_OFFSET_2 18
#define FR_ADC_OFFSET_3 19
// ------------------------------------------------------------------------
// Automatic Transmit/Receive switching
//
// If automatic transmit/receive (ATR) switching is enabled in the
// FR_ATR_CTL register, the presence or absence of data in the FPGA
// transmit fifo selects between two sets of values for each of the 4
// banks of daughterboard i/o pins.
//
// Each daughterboard slot has 3 16-bit registers associated with it:
// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
//
// FR_ATR_MASK_{0,1,2,3}:
//
// These registers determine which of the daugherboard i/o pins are
// affected by ATR switching. If a bit in the mask is set, the
// corresponding i/o bit is controlled by ATR, else it's output
// value comes from the normal i/o pin output register:
// FR_IO_{0,1,2,3}.
//
// FR_ATR_TXVAL_{0,1,2,3}:
// FR_ATR_RXVAL_{0,1,2,3}:
//
// If the Tx fifo contains data, then the bits from TXVAL that are
// selected by MASK are output. Otherwise, the bits from RXVAL that
// are selected by MASK are output.
#define FR_ATR_MASK_0 20 // slot 0
#define FR_ATR_TXVAL_0 21
#define FR_ATR_RXVAL_0 22
#define FR_ATR_MASK_1 23 // slot 1
#define FR_ATR_TXVAL_1 24
#define FR_ATR_RXVAL_1 25
#define FR_ATR_MASK_2 26 // slot 2
#define FR_ATR_TXVAL_2 27
#define FR_ATR_RXVAL_2 28
#define FR_ATR_MASK_3 29 // slot 3
#define FR_ATR_TXVAL_3 30
#define FR_ATR_RXVAL_3 31
// Clock ticks to delay rising and falling edge of T/R signal
#define FR_ATR_TX_DELAY 2
#define FR_ATR_RX_DELAY 3
#endif /* INCLUDED_FPGA_REGS_COMMON_H */
|
