1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2006,2007 Matt Ettus
// Copyright (C) 2008 Corgan Enterprises LLC
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// ------------------------------------------------------------
// If TX_ON is not defined, there is *no* transmit circuitry built
`define TX_ON
// ------------------------------------------------------------
// Define 1 and only one of TX_SINGLE, TX_DUAL and TX_QUAD
// to respectively enable 1, 2 or 4 transmit channels.
// [Please note that only TX_SINGLE and TX_DUAL are currently valid]
//`define TX_SINGLE
`define TX_DUAL
//`define TX_QUAD
// ------------------------------------------------------------
// If TX_DIG_ON is defined each transmit channel sends its I lsb and Q lsb to gpio pins
// The lsb bits of the analog output signal are truncated
`define TX_DIG_ON
// ------------------------------------------------------------
// Define TX_HB_ON to enable the transmit halfband filter
// [Not implemented]
//`define TX_HB_ON
// ------------------------------------------------------------
// IF RX_ON is not defined, there is *no* receive circuitry built
`define RX_ON
// ------------------------------------------------------------
// Define 1 and only one of RX_SINGLE, RX_DUAL and RX_QUAD
// to respectively define 1, 2 or 4 receive channels.
//`define RX_SINGLE
`define RX_DUAL
//`define RX_QUAD
// ------------------------------------------------------------
// Define RX_HB_ON to enable the receive halfband filter
// `define RX_HB_ON
// ------------------------------------------------------------
// Define RX_NCO_ON to enable the receive Numerical Controlled Osc
`define RX_NCO_ON
// ------------------------------------------------------------
// Define RX_CIC_ON to enable the receive Cascaded Integrator Comb filter
// This is mutually exclusive with RX_INTEG_ON
// `define RX_CIC_ON
// ------------------------------------------------------------
// Define RX_INTEG_ON to enable the receive single stage integrate and dump
// This is mutually exclusive with RX_CIC_ON
`define RX_INTEG_ON
// ------------------------------------------------------------
// If RX_DIG_ON is defined each receive channel sends has its I lsb and Q lsb replaced by digital input from gpio pins
// So the analog signals are truncated to 15 bits
`define RX_DIG_ON
|
