| Age | Commit message (Expand) | Author |
|---|
| 2009-03-03 | Actually enable/disable tx via gpio (...when tx enable is supported). | jblum |
| 2009-02-26 | remove support for unmodified dbsrx because there is way too much phase noise... | matt |
| 2009-02-23 | support for unmodified dbsrx boards | matt |
| 2009-02-17 | minor renaming | eb |
| 2009-02-17 | Use defined bit positions | jcorgan |
| 2009-02-10 | Merged r10418:10423 from jcorgan/pps into trunk. Adds usrp2::sync_every_pps | jcorgan |
| 2009-02-04 | Merged r10383:10390 from jcorgan/u2-wip into trunk. | jcorgan |
| 2009-02-04 | usrp2-xcvr cleanup, working gains, freqs | jblum |
| 2009-02-04 | usrp2: xcvr working | jblum |
| 2009-02-03 | work in progress: xcvr running, needs work with divisors | matt |
| 2009-02-02 | work in progress: setting gpio on xcvr | jblum |
| 2009-01-31 | debug info | matt |
| 2009-01-31 | work with the set reg functions | jblum |
| 2009-01-30 | xcvr: initialize chipset | jblum |
| 2009-01-30 | converted set freq in xcvr | jblum |
| 2009-01-30 | work on xcvr set_freq | jblum |
| 2009-01-30 | xcvr dboard support | jblum |
| 2009-01-29 | tunes the dbsrx properly. You need to mod your dbsrx, though. | matt |
| 2009-01-28 | dbsrx daughterboard support, gain works, not freq | matt |
| 2009-01-23 | mimo tx work-in-progress | eb |
| 2009-01-23 | revert extraction of buffer_state | eb |
| 2009-01-23 | Work in progress on mimo Tx state machine. | eb |
| 2009-01-22 | bumped stack to 3k (not sure we needed to), cleaned up old serdes test | eb |
| 2008-12-31 | Rename constant for clarity | jcorgan |
| 2008-12-17 | added frequency offset capability. Set to 12.5e6 on TX, 0 on RX for now | matt |
| 2008-12-05 | implemented "reset master clock on next PPS" so we can easily sync multiple u... | matt |
| 2008-12-05 | send a char to the serial port, but don't wait if the queue is full | matt |
| 2008-11-16 | removed old python comments | matt |
| 2008-11-16 | fixed gain calculations rfx900-2400 | matt |
| 2008-11-09 | hardware control of leds | matt |
| 2008-10-31 | enable all rfx boards | matt |
| 2008-10-27 | Minor cleanup. | eb |
| 2008-10-27 | removed extra indentation. No change in functionality | eb |
| 2008-10-26 | Deadly printfs turned off... Specified gain ranges for TV Rx and RFX boards. | eb |
| 2008-10-22 | Added methods to query daughterboard parameters. Merged eb/u2-wip2 | eb |
| 2008-10-18 | added in mux for DACs | matt |
| 2008-10-15 | reverse the spectrum on the TVRX boards | matt |
| 2008-10-15 | Added firmware support for adc_mux to handle swapping I/Q, etc. | eb |
| 2008-10-14 | fixed problem with negative offsets in calc_dxc_freq | eb |
| 2008-10-14 | mark RFX boards as i_and_q_swapped | eb |
| 2008-10-14 | s/w support for tx and rx mux | eb |
| 2008-10-14 | new tx and rx mux registers | eb |
| 2008-10-14 | initialized freq_min/max values | eb |
| 2008-10-13 | fix diagnostic output | eb |
| 2008-10-13 | mods to build under old tools | eb |
| 2008-10-12 | refactored divider setting on rxdb clk, txdb clk, and test clk | matt |
| 2008-10-11 | New serdes status interrupt, clk_status interrupt. New capability to flush t... | matt |
| 2008-10-11 | removed unneeded setting | matt |
| 2008-10-04 | USRP2 firmware fixes for EDK 10.1 microblaze toolchain. Firmware now builds | eb |
| 2008-09-21 | new app to test the ram | matt |
