Added firmware support for adc_mux to handle swapping I/Q, etc.

Modified dsp_core_rx.v to swap A and B mapping so that the software
thinks that the TVRX is connected to A/D A. 

ISE 10.1 SP3 is required to compile the FPGA successfully.  SP2 is
insufficient.  It compiles with SP2, but the firmware doesn't load.
Only the F led is one in that case.



git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5

4 files changed, 13 insertions, 14 deletions

diff --git a/usrp2/firmware/lib/db_init.c b/usrp2/firmware/lib/db_init.c
index 20816418b..160ed2942 100644
--- a/usrp2/firmware/lib/db_init.c
+++ b/usrp2/firmware/lib/db_init.c
@@ -180,8 +180,8 @@ set_gpio_mode(int bank, struct db_base *db)
   }
 }
 
-static int
-determine_tx_mux_value(struct db_base *db)
+static int __attribute__((unused))
+determine_tx_mux_value(struct db_base *db) 
 {
   if (db->i_and_q_swapped)
     return 0x01;
@@ -240,9 +240,9 @@ db_init(void)
   //printf("db_init: tx dbid = 0x%x\n", tx_dboard->dbid);
   set_gpio_mode(GPIO_TX_BANK, tx_dboard);
   tx_dboard->init(tx_dboard);
-  m = determine_tx_mux_value(tx_dboard);
-  dsp_tx_regs->tx_mux = m;
-  printf("tx_mux = 0x%x\n", m);
+  //m = determine_tx_mux_value(tx_dboard);
+  //dsp_tx_regs->tx_mux = m;
+  //printf("tx_mux = 0x%x\n", m);
 
   rx_dboard = lookup_dboard(I2C_ADDR_RX_A, &db_basic_rx, "Rx");
   //printf("db_init: rx dbid = 0x%x\n", rx_dboard->dbid);
diff --git a/usrp2/firmware/lib/db_tvrx.c b/usrp2/firmware/lib/db_tvrx.c
index 062d71895..73504951f 100644
--- a/usrp2/firmware/lib/db_tvrx.c
+++ b/usrp2/firmware/lib/db_tvrx.c
@@ -185,7 +185,7 @@ tvrx_set_freq(struct db_base *dbb, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc)
   printf("N_DIV = %d, actual_freq = %d, actual_lo_freq = %d\n",
 	 N_DIV, u2_fxpt_freq_round_to_int(actual_freq),u2_fxpt_freq_round_to_int(actual_freq));
 
-  char buf[4];
+  unsigned char buf[4];
   buf[0] = (N_DIV>>8) & 0xff;
   buf[1] = N_DIV & 0xff;
   buf[2] = control_byte_1;
@@ -200,7 +200,7 @@ tvrx_set_freq(struct db_base *dbb, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc)
 bool
 tvrx_set_gain(struct db_base *dbb, u2_fxpt_gain_t gain)
 {
-  struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb;
+  //struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb;
   int rfgain;
   int ifgain;
   if(gain>U2_DOUBLE_TO_FXPT_GAIN(95.0))
@@ -235,6 +235,6 @@ tvrx_set_gain(struct db_base *dbb, u2_fxpt_gain_t gain)
 bool
 tvrx_lock_detect(struct db_base *dbb)
 {
-  struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb;
+  // struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb;
   return true;
 }
diff --git a/usrp2/firmware/lib/memory_map.h b/usrp2/firmware/lib/memory_map.h
index bbf8165bb..a7d38a15c 100644
--- a/usrp2/firmware/lib/memory_map.h
+++ b/usrp2/firmware/lib/memory_map.h
@@ -411,7 +411,7 @@ typedef struct {
    * The default value is 0x10
    * </pre>
    */
-  volatile uint32_t	tx_mux;
+  //volatile uint32_t	tx_mux;		// FIXME this register is currently unimplemented
 
 } dsp_tx_regs_t;
   
@@ -435,7 +435,6 @@ typedef struct {
   volatile uint32_t     dcoffset_i;     // Bit 31 high sets fixed offset mode, using lower 14 bits,
                                         // otherwise it is automatic 
   volatile uint32_t     dcoffset_q;     // Bit 31 high sets fixed offset mode, using lower 14 bits
-  volatile uint32_t     adc_mux;        // 4 bits -- lowest 2 for adc_i, next for adc_q
 
   /*!
    * \brief input mux configuration.
@@ -449,16 +448,16 @@ typedef struct {
    *    3                   2                   1                       
    *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
    * +-------+-------+-------+-------+-------+-------+-------+-------+
-   * |                                               |Q1 |I1 |Q0 |I0 |
+   * |                                                       |Q0 |I0 |
    * +-------+-------+-------+-------+-------+-------+-------+-------+
    *
    * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
    * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
    *
-   * The default value is 0x44444444
+   * The default value is 0x4
    * </pre>
    */
-  volatile uint32_t	rx_mux;
+  volatile uint32_t     rx_mux;        // called adc_mux in dsp_core_rx.v
 
 } dsp_rx_regs_t;
   
diff --git a/usrp2/firmware/lib/u2_init.c b/usrp2/firmware/lib/u2_init.c
index 948055694..7482040f0 100644
--- a/usrp2/firmware/lib/u2_init.c
+++ b/usrp2/firmware/lib/u2_init.c
@@ -87,7 +87,7 @@ u2_init(void)
   ad9777_write_reg(12, 0);
   
   // Initial values for tx and rx mux registers
-  dsp_tx_regs->tx_mux = 0x10;
+  // dsp_tx_regs->tx_mux = 0x10;
   dsp_rx_regs->rx_mux = 0x44444444;
 
   // Set up serdes