| Age | Commit message (Expand) | Author |
|---|
| 2009-09-02 | ignore .o files | Matt Ettus |
| 2009-09-01 | tell s/w link is up. additional debugging output | Eric Blossom |
| 2009-08-31 | Merged SVN matt/new_eth r10782:11633 into new_eth | Johnathan Corgan |
| 2009-08-14 | Added git ignore files auto created from svn:ignore properties. | git |
| 2009-06-22 | 1 is for hardware control of leds, 0 is for software | matt |
| 2009-06-19 | test for clock lock | matt |
| 2009-06-19 | allow the choice of automatic (hardware) control of leds | matt |
| 2009-05-28 | handle clocks on both version 3 and version 4 boards, cleaned up the api | matt |
| 2009-05-25 | move i2c init and get_hw_rev before clocks_init because the clock init code n... | matt |
| 2009-05-25 | remove unneeded include file | matt |
| 2009-05-25 | remove printfs to save space. | matt |
| 2009-05-25 | remove unneeded include | matt |
| 2009-04-27 | somebody commented out the tx mux setting which prevented the xcvr2450 from w... | matt |
| 2009-04-04 | Merged r10712:10765 from jcorgan/gpio into trunk. Adds out-of-band and strea... | jcorgan |
| 2009-04-02 | new regs for re-pause fix | matt |
| 2009-03-18 | Fixed ticket:339 (ethernet capability advertisement). We now | eb |
| 2009-03-10 | Bumped up minimum divider to 131 for xcvr. | jblum |
| 2009-03-05 | New standalone firmware, burn_dbsrx_eeprom, that burns new dbid into | eb |
| 2009-03-03 | Actually enable/disable tx via gpio (...when tx enable is supported). | jblum |
| 2009-02-26 | remove support for unmodified dbsrx because there is way too much phase noise... | matt |
| 2009-02-23 | support for unmodified dbsrx boards | matt |
| 2009-02-17 | minor renaming | eb |
| 2009-02-17 | Use defined bit positions | jcorgan |
| 2009-02-10 | Merged r10418:10423 from jcorgan/pps into trunk. Adds usrp2::sync_every_pps | jcorgan |
| 2009-02-04 | Merged r10383:10390 from jcorgan/u2-wip into trunk. | jcorgan |
| 2009-02-04 | usrp2-xcvr cleanup, working gains, freqs | jblum |
| 2009-02-04 | usrp2: xcvr working | jblum |
| 2009-02-03 | work in progress: xcvr running, needs work with divisors | matt |
| 2009-02-02 | work in progress: setting gpio on xcvr | jblum |
| 2009-01-31 | debug info | matt |
| 2009-01-31 | work with the set reg functions | jblum |
| 2009-01-30 | xcvr: initialize chipset | jblum |
| 2009-01-30 | converted set freq in xcvr | jblum |
| 2009-01-30 | work on xcvr set_freq | jblum |
| 2009-01-30 | xcvr dboard support | jblum |
| 2009-01-29 | tunes the dbsrx properly. You need to mod your dbsrx, though. | matt |
| 2009-01-28 | dbsrx daughterboard support, gain works, not freq | matt |
| 2009-01-23 | mimo tx work-in-progress | eb |
| 2009-01-23 | revert extraction of buffer_state | eb |
| 2009-01-23 | Work in progress on mimo Tx state machine. | eb |
| 2009-01-22 | bumped stack to 3k (not sure we needed to), cleaned up old serdes test | eb |
| 2008-12-31 | Rename constant for clarity | jcorgan |
| 2008-12-17 | added frequency offset capability. Set to 12.5e6 on TX, 0 on RX for now | matt |
| 2008-12-05 | implemented "reset master clock on next PPS" so we can easily sync multiple u... | matt |
| 2008-12-05 | send a char to the serial port, but don't wait if the queue is full | matt |
| 2008-11-16 | removed old python comments | matt |
| 2008-11-16 | fixed gain calculations rfx900-2400 | matt |
| 2008-11-09 | hardware control of leds | matt |
| 2008-10-31 | enable all rfx boards | matt |
| 2008-10-27 | Minor cleanup. | eb |
