summaryrefslogtreecommitdiff
path: root/usrp2/firmware/apps
AgeCommit message (Collapse)Author
2010-05-17-Updated to allow BURX support to be built into standard txrx.binJohnOrlando
image -Also corrected db_bitshark_rx.c to the current version (previous git push error) that includes the needed delays after I2C commands
2010-05-11Update incorrectly checked in Makefile.amJohn Orlando
2010-02-25setting xcvr antennas through apiJosh Blum
2010-02-25Added call to set antenna. Split XCVR into new thing cuz size.Josh Blum
2010-02-21Merge branches 'wbx_usrp2' and 'wbx_usrp1' of git://gnuradio.org/jabeleJohnathan Corgan
2010-02-14remove reference to nonexistant includeMatt Ettus
2010-02-14test the ability to read default eeprom values, for D. SymeonidisMatt Ettus
2010-02-10First pass WBX USRP2 driverJason Abele
2009-12-03Rebase on master, cleanup for mergeJohnathan Corgan
Trailing whitespace removal Copyright updates
2009-12-03Updated 'u2_rx_stream_at' to work with new_eth MAC (Douglas Geiger)Johnathan Corgan
2009-12-03Applied 'start streaming at' patch from Douglas GeigerJohnathan Corgan
2009-10-01Merge branch 'new_eth' of http://gnuradio.org/git/matt into masterJohnathan Corgan
* 'new_eth' of http://gnuradio.org/git/matt: (42 commits) Fix warnings, mostly from implicitly defined wires or unspecified widths fullchip sim now compiles again, after moving eth and models over to new simple_gemac remove unused opencores remove debugging code no idea where this came from, it shouldn't be here Copied wb_1master back from quad radio Remove old mac. Good riddance. remove unused port More xilinx fifos, more clean up of our fifos might as well use a cascade fifo to help timing and give a little more capacity fix a typo which caused tx glitches Untested fixes for getting serdes onto the new fifo system. Compiles, at least Implement Eth flow control using pause frames parameterized fifo sizes, some reformatting remove unused old style fifo allow control of whether or not to honor flow control, adds some debug lines debug the rx side no longer used, replaced by newfifo version remove special last_line adjustment from ethernet port Firmware now inserts mac source address value in each frame. ...
2009-09-30remove debugging codeMatt Ettus
2009-09-04remove special last_line adjustment from ethernet portEric Blossom
2009-09-04Firmware now inserts mac source address value in each frame.Eric Blossom
The old mac used to do this automatically.
2009-09-03removed hard-coded link_is_up = true;Eric Blossom
2009-09-02ignore .o filesMatt Ettus
2009-09-01tell s/w link is up. additional debugging outputEric Blossom
2009-08-31Merged SVN matt/new_eth r10782:11633 into new_ethJohnathan Corgan
* svn diff http://gnuradio.org/svn/branches/developers/matt/new_eth -r10782:11633 * Patch applied with no conflicts or fuzz.
2009-08-14Added git ignore files auto created from svn:ignore properties.git
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11592 221aa14e-8319-0410-a670-987f0aec2ac5
2009-06-19test for clock lockingmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11241 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-29remove dbsm to make room in flashmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11164 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25remove EEPROM setting, complete tests even if SD failsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11118 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25remove direct calls to ad9510 and use api insteadmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11117 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-10simple images to set revision numbermatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10998 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-04Merged r10712:10765 from jcorgan/gpio into trunk. Adds out-of-band and ↵jcorgan
streaming GPIO functions for USRP2. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
2009-03-05New standalone firmware, burn_dbsrx_eeprom, that burns new dbid intoeb
modified DBS Rx daughterboard. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10560 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-17minor renamingeb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10456 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-17Use defined bit positionsjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10454 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-10Merged r10418:10423 from jcorgan/pps into trunk. Adds usrp2::sync_every_ppsjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10424 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-04Merged r10383:10390 from jcorgan/u2-wip into trunk.jcorgan
* Implements daughterboard independent LO offset tuning * Removes RFX specific LO offset code * Adds 'set_lo_offset' to libusrp2 and Python API * Adds --lo-offset to usrp2_fft.py and usrp2_rx_cfile.py * Ensures daughterboards are reset to default values at startup. Trunk passes distcheck. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10392 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-31minor rev increase for for 3.01, which was just pcb cosmetic changesmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10352 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-27third time's a charm...eb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10321 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-27added missing .h fileseb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10319 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-27Merged eb/u2-mimo-wip -r10297:10317 into the trunk. This containseb
down and dirty test code that confirms that we can coherently transmit different signals to two USRP2s connected via a mimo cable. app_common_v2.h and app_passthru_v2.h were slightly modified, but these changes to not alter the behavior of the standard code (txrx). git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10318 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-27General housekeeping--removing ancient cruft mostly.jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10315 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-22bumped stack to 3k (not sure we needed to), cleaned up old serdes testeb
code: eth_serdes.c and serdes_txrx.c, can tx over serdes at interp 4 (underruns quite frequently), same behavior as regular txrx.c git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10291 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-31Fix USRP2 peek32() max wordsjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10183 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-31Rename constant for clarityjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10181 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-29Implements USRP2 poke32() command.jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10176 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-27Implements USRP2 peek() command, allowing arbitrary reads from the internaljcorgan
Wishbone bus. Minor fix for USRP2 sync_to_pps() (uses correct packet type.) Example: >>> from gnuradio import usrp2 >>> u = usrp2.source_32fc() >>> u.peek(0x1234, 4) # Read four bytes at offset 0x1234 (code) (185, 244, 253, 164) >>> The return value will be zero length upon error. The read address must be 32-bit aligned, and only the lower 16 bits are significant. The length must be an integral multiple of 4 bytes. There is currently a read limit of 176 bytes per read; to change requires some additional firmware changes to allocate a larger reply packet. WARNING: Trying to read from memory locations not serviced by RAM or by a Wishbone peripheral may result in a hang requiring a USRP2 power cycle. The USRP2 internal memory map is documented in usrp2/firmware/lib/memory_map.h. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10172 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-14add break at end of new case to prevent fallthru. Also cleared up a warning.matt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10119 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-14Fix failure with interp > 128jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10117 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-14Implement sync_to_pps command for USRP2jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10116 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-07split test out into a functionmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10109 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-07more tests, for ram and sd cardmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10108 221aa14e-8319-0410-a670-987f0aec2ac5
2008-11-09more thorough testmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9963 221aa14e-8319-0410-a670-987f0aec2ac5
2008-11-09more thorough testmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9959 221aa14e-8319-0410-a670-987f0aec2ac5
2008-11-06removed obsolete test codeeb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9941 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-27Fix (actually a bit of a kludge) for the frequency setting whileeb
streaming problem. You can now set the frequency in usrp2_fft.py while streaming without dying :-) git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9878 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-21 13:29:20 +0000