summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-20dont hide vlen controller when vlen > 1jblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10272 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-20probe for the usrp2jblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10271 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-20Fixed arguments mis-match in setup_normal(), setup_dual(), ↵mleech
setup_interferometer() git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10267 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-20set the icon in both executablesjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10266 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-20usrp2 block xmlsjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10265 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-20call it probejblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10264 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19replaced ", usrp2 blocks, hide for usrp params, mux defaults to 0x0jblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10263 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19enable_realtime in usrp2_siggen.pyjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10262 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19only set scale_iq if askedjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10261 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19corrected link up detectormatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10260 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19new cordicmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10259 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19widen cordic on tx sidematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10258 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-19clarify commentmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10257 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-1924 bit wide z. Can't do this parameterized, unfortunately.matt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10256 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-17merging -r10252:10253 from developer branch to kick RX gain down in half on ↵gnychis
default git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10254 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-17merging from developer branch to fix manual frequency setting problem, for ↵gnychis
real this time git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10250 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-17seriously, sorry... tried to ctrl+c that but didnt get in timegnychis
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10249 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-17merging r10246:10247 from developer branch to fix manual frequency setting ↵gnychis
problem git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10248 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-16merging 10218 to 10241 for full daughterboard support with in-band projectgnychis
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10244 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-15Merged eb/gcell-wip -r10213:10230 into the trunk. This reduces theeb
overhead of off-loading jobs, such that it is now feasible to off-load 50us jobs on the QS21 and 10us jobs on the PS3. See wiki:Gcell for performance graphs. There is still plenty of room for improvement. I'll be revisiting this in a week or so. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10231 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-14always use ddc0jblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10219 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-12Fixes in-band code for new daughterboard API (Stefan Bruens)jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10208 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-11cache evaluated statements, do not parse huge vectors for displayjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10205 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-09added frequency offsetmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10204 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-09fix for xcvr. matt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10203 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-09More XCVR2450 fixes.jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10202 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-08Fix sign error in XCVR2450 codejcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10201 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-08fixed syntax error casesjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10199 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-07gtk test import redirect warningjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10198 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-06Update doxygen Python generation (Firas Abbas)jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10195 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-05Update configuration file to not use inline commentsjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10194 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-05Allow setting of non-standard FPGA master clock frequency for USRP1jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10193 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-03Fixed bug that under-flowed self.notchesmleech
increased notch resolution to 128 taps git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10190 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-01Bumped up resolution of notch filter from 16 taps to 128 taps.mleech
Increased buffering on usrp.source_c git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10185 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-01Add BOOST_LDFLAGS to link, clean upjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10184 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-31Fix USRP2 peek32() max wordsjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10183 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-31For USRP2, implement auto scaling of TX pipeline such that [-1.0 1.0] input tojcorgan
usrp2.sink_32fc results in full-scale DAC outputs, regardless of interpolation rate. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10182 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-31Rename constant for clarityjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10181 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-30Fixed handling of out-of-range NOTCH specificationsmleech
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10180 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-30Turned set_bw() back on...mleech
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10178 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-30error handling for dtd validationjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10177 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-29Implements USRP2 poke32() command.jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10176 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-28Fix typojcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10175 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-28Replaced USRP2 peek() with peek32(), handles endian-swapping if neededjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10174 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-28Brought back support for notch filtering--both clicky in FFT display, and onmleech
the command line. Temporarily commented-out call to set_bw(), since latest trunk has broken it. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10173 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-27Implements USRP2 peek() command, allowing arbitrary reads from the internaljcorgan
Wishbone bus. Minor fix for USRP2 sync_to_pps() (uses correct packet type.) Example: >>> from gnuradio import usrp2 >>> u = usrp2.source_32fc() >>> u.peek(0x1234, 4) # Read four bytes at offset 0x1234 (code) (185, 244, 253, 164) >>> The return value will be zero length upon error. The read address must be 32-bit aligned, and only the lower 16 bits are significant. The length must be an integral multiple of 4 bytes. There is currently a read limit of 176 bytes per read; to change requires some additional firmware changes to allocate a larger reply packet. WARNING: Trying to read from memory locations not serviced by RAM or by a Wishbone peripheral may result in a hang requiring a USRP2 power cycle. The USRP2 internal memory map is documented in usrp2/firmware/lib/memory_map.h. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10172 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-26Fix missing set_bw call in new daughterboard API. Reconciled ↵jcorgan
implementations between different boards to return true or false (success). git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10168 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-25Fix include paths for VPATH build (Michael Dickens). Note, this was one of ↵jcorgan
thoses cases where 'make distcheck' would pass, yet a VPATH would fail. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10167 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-24Merged r10071:10164 from features/cppdb-test into trunk. Implements the ↵jcorgan
fully native C++ API for the USRP. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10165 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-22Merged eb/gcell-wip2 rev 10130:10152 into trunk.eb
This makes several gcell related changes. {{{ The first two are INCOMPATIBLE CHANGES: (1) The gcell portion of the code base was reorganized. As part of that reorganization, the paths to the include files changed. They are now installed under PREFIX/include/gcell instead of directly in PREFIX/include. This means that all includes of the form: #include <gc_foo.h> should be changed to #include <gcell/gc_foo.h> (2a) If you are directly using gcell-embedspu-libtool or the $(GCELL_EMBEDSPU_LIBTOOL) variable in your Makefiles, the order of the two command line arguments was switched. It's now $(GCELL_EMBEDSPU_LIBTOOL) input_file output_file or equivalently $(GCELL_EMBEDSPU_LIBTOOL) $< $@ gcell-embedspu-libtool allows you to convert an SPE executable into something that libtool will allow you add to a host shared library. (2b) The name of the symbol created by gcell-embedspu-libtool is now suffixed with _spx (SPE executable) to reduce the probability of name collision. If you have lines like this: extern spe_program_handle_t gcell_all; in your code, you may have to change them to: extern spe_program_handle_t gcell_all_spx; The following changes are enhancements and shouldn't break any existing code: (3) We now install two new pkg-config files, gcell.pc and gcell_spu.pc. These can be used to assist in building gcell code that lives outside the GNU Radio repository. The first gives the include and library paths for the PPE host code, the second is the same info for the the SPE code. There is also a new .m4 macro, GR_GCELL, contained in config/gr_gcell.m4, that uses PKG_CONFIG_MODULES to fish out the relevant variables. If you've got standalone code that uses gcell, you'll probably want to copy this macro (along with our version of pkg.m4) to your tree and use it. It sets the following variables: GCELL_CFLAGS GCELL_CPPFLAGS GCELL_INCLUDEDIR GCELL_LIBS GCELL_SPU_CFLAGS GCELL_SPU_CPPFLAGS GCELL_SPU_INCLUDEDIR GCELL_SPU_LIBS GCELL_EMBEDSPU_LIBTOOL (4) make -j now works in the gcell directory (fixes ticket:242). }}} git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10153 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-22 01:08:21 +0000