diff options
Diffstat (limited to 'usrp')
| -rwxr-xr-x | usrp/host/apps/burn-db-eeprom | 1 | ||||
| -rw-r--r-- | usrp/host/include/usrp/Makefile.am | 1 | ||||
| -rw-r--r-- | usrp/host/include/usrp/db_bitshark_rx.h | 56 | ||||
| -rw-r--r-- | usrp/host/lib/Makefile.am | 1 | ||||
| -rw-r--r-- | usrp/host/lib/db_bitshark_rx.cc | 416 | ||||
| -rw-r--r-- | usrp/host/lib/db_boards.cc | 5 | ||||
| -rw-r--r-- | usrp/host/lib/usrp_dbid.dat | 2 |
7 files changed, 482 insertions, 0 deletions
diff --git a/usrp/host/apps/burn-db-eeprom b/usrp/host/apps/burn-db-eeprom index 7ff1e9736..8fb9143eb 100755 --- a/usrp/host/apps/burn-db-eeprom +++ b/usrp/host/apps/burn-db-eeprom @@ -71,6 +71,7 @@ daughterboards = { 'wbx_lo' : ((WBX_LO_TX, 0x0000), (WBX_LO_RX, 0x0000)), 'wbx_ng' : ((WBX_NG_TX, 0x0000), (WBX_NG_RX, 0x0000)), 'xcvr2450' : ((XCVR2450_TX, 0x0000), (XCVR2450_RX, 0x0000)), + 'bitshark_rx' : (None, (BITSHARK_RX, 0x0000)), 'experimental_tx' : ((EXPERIMENTAL_TX, 0x0000), None), 'experimental_rx' : (None, (EXPERIMENTAL_RX, 0x0000)), } diff --git a/usrp/host/include/usrp/Makefile.am b/usrp/host/include/usrp/Makefile.am index cfce51443..2aaf66a53 100644 --- a/usrp/host/include/usrp/Makefile.am +++ b/usrp/host/include/usrp/Makefile.am @@ -26,6 +26,7 @@ usrpincludedir = $(includedir)/usrp usrpinclude_HEADERS = \ db_base.h \ db_basic.h \ + db_bitshark_rx.h \ db_dbs_rx.h \ db_dtt754.h \ db_dtt768.h \ diff --git a/usrp/host/include/usrp/db_bitshark_rx.h b/usrp/host/include/usrp/db_bitshark_rx.h new file mode 100644 index 000000000..f81877d28 --- /dev/null +++ b/usrp/host/include/usrp/db_bitshark_rx.h @@ -0,0 +1,56 @@ +/* -*- c++ -*- */ +// +// Copyright 2010 Free Software Foundation, Inc. +// +// This file is part of GNU Radio +// +// GNU Radio is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either asversion 3, or (at your option) +// any later version. +// +// GNU Radio is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with GNU Radio; see the file COPYING. If not, write to +// the Free Software Foundation, Inc., 51 Franklin Street, +// Boston, MA 02110-1301, USA. + +#ifndef DB_BITSHARK_RX_H +#define DB_BITSHARK_RX_H + +#include <usrp/db_base.h> +#include <vector> +#include <stdint.h> + +class db_bitshark_rx : public db_base +{ +private: + int d_i2c_addr; + // Internal function for interfacing to the card + void _set_pga(int pga_gain); + +protected: + void shutdown(); + +public: + db_bitshark_rx(usrp_basic_sptr usrp, int which); + ~db_bitshark_rx(); + + float gain_min(); + float gain_max(); + float gain_db_per_step(); + double freq_min(); + double freq_max(); + struct freq_result_t set_freq(double freq); + bool set_gain(float gain); + bool set_bw(float bw); + bool set_clock_scheme(uint8_t clock_scheme, uint32_t ref_clock_freq); + bool is_quadrature(); + bool i_and_q_swapped(); +}; + +#endif diff --git a/usrp/host/lib/Makefile.am b/usrp/host/lib/Makefile.am index e80f27112..1fff1548b 100644 --- a/usrp/host/lib/Makefile.am +++ b/usrp/host/lib/Makefile.am @@ -121,6 +121,7 @@ libusrp_la_common_SOURCES = \ db_boards.cc \ db_base.cc \ db_basic.cc \ + db_bitshark_rx.cc \ db_tv_rx.cc \ db_tv_rx_mimo.cc \ db_flexrf.cc \ diff --git a/usrp/host/lib/db_bitshark_rx.cc b/usrp/host/lib/db_bitshark_rx.cc new file mode 100644 index 000000000..9b8ada4a2 --- /dev/null +++ b/usrp/host/lib/db_bitshark_rx.cc @@ -0,0 +1,416 @@ +// +// Copyright 2010 Free Software Foundation, Inc. +// +// This file is part of GNU Radio +// +// GNU Radio is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either asversion 3, or (at your option) +// any later version. +// +// GNU Radio is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with GNU Radio; see the file COPYING. If not, write to +// the Free Software Foundation, Inc., 51 Franklin Street, +// Boston, MA 02110-1301, USA. + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <usrp/db_bitshark_rx.h> +#include <db_base_impl.h> +#include <cmath> +#include <cstdio> +#include <string.h> +#include <stdint.h> + +/* Note: Thie general structure of this file is based on the db_dbsrx.cc + codebase for the dbsrx daughterboard. */ + +/* The following defines specify the address map provided by the + Bitshark card. These registers are all accessed over I2C. */ +#define RF_CENTER_FREQ_REG 0x00 +#define RF_CHAN_FILTER_BW_REG 0x01 +#define RF_GAIN_REG 0x02 +#define BB_GAIN_REG 0x03 +#define ADF4350_REG 0x10 +#define SKY73202_REG 0x11 +#define CLOCK_SCHEME_REG 0x20 + +/* The following table lists the registers provided by the BURX board that + are accessible over I2C: + -------------------------------------------------------- + |RegAddr: 0x00-RF Center Freq register | + |4-bytes 0x00| + |4-byte unsigned RF center freq (in KHz)| + |RegAddr: 0x01-RF channel filter bandwidth register | + |4-bytes 0x00| + |4-byte unsigned RF channel filter bw (in KHz)| + |RegAddr: 0x02-RF gain register | + |7-bytes 0x00| + |1-byte signed RF gain (in dB)| + |RegAddr: 0x03-Baseband gain register | + |4-bytes 0x00| + |4-byte signed baseband filter gain (in dB)| + |RegAddr: 0x10-ADF4350 register | + |4-bytes 0x00| + |4-byte ADF4350 register value (actual ADF4350 reg addr embedded + within 4-byte value)| + |RegAddr: 0x11-SKY73202 register | + |5-bytes 0x00| + |1-byte reg 0 of SKY73202 | + |1-byte reg 1 of SKY73202 | + |1-byte reg 2 of SKY73202 | + |RegAddr: 0x20-Clock Scheme | + |3-bytes 0x00| + |1-byte indicating clocking scheme: + -0x00 -> BURX local TCXO off, BURX accepts ref clock from + USRP (freq of USRP's ref clock specified in bytes 2-5) + -0x01 -> BURX local TCXO on, BURX uses its local TCXO as its ref + clock, TCXO signal output for use by USRP | + |4-byte USRP ref clock freq in hz (only needed if byte 1 set to 0x00) | + + --------------------------------------------------------------------------- + + As an example, lets say the client wants to set an RF center freq of + 1000 MHz. In KHz, this translates to 1000000 (resolution is only down to + steps of 1 KHz), which is 0x000F4240 in hex. So the complete 9-byte I2C + sequence that the client should send is as follows: + byte 0: 0x00-register 0x00 is the target of the write operation + bytes 1-4: 0x00 (padding) + byte 5: 0x40 (LSB of the 1000000 KHz value, in hex) + byte 6: 0x42 + byte 7: 0x0F + byte 8: 0x00 (MSB of the 1000000 KHz value, in hex) + + If using the usrper cmd-line application on a PC, this sequence would + be sent as follows (assuming that the BURX is in slot A): + + # usrper i2c_write 0x47 000000000040420F00 + + How about another example...lets say the client wants to setup the clock + scheme to use scheme #1 where the 26 MHz TCXO on the BURX board is enabled, + and is provided to the USRP. 26 MHz (i.e. 26 million), in hex, is 0x18CBA80. + So the complete 9-byte I2C sequence that the client should send is as follows: + byte 0: 0x20-register 0x20 is the target of the write operation + bytes 1-3: 0x00 (padding) + byte 4: 0x01 (indicating that clock scheme #1 is wanted) + byte 5: 0x80 (LSB of the BURX ref clk freq) + byte 6: 0xBA + byte 7: 0x8C + byte 8: 0x01 (MSB of the BURX ref clk freq) + + To enable the BURX local ref clk, which will also make it available on the + on-board U.FL connector as a source for the USRP, a user can also use + the usrper cmd-line application on a PC. The following sequence would + be sent (assuming that the BURX is in slot A): + + # usrper i2c_write 0x47 200000000180BA8C01 + +*/ + +#define NUM_BYTES_IN_I2C_CMD 9 + +/*****************************************************************************/ + +db_bitshark_rx::db_bitshark_rx(usrp_basic_sptr _usrp, int which) + : db_base(_usrp, which) +{ + // Control Bitshark receiver USRP daughterboard. + // + // @param usrp: instance of usrp.source_c + // @param which: which side: 0, 1 corresponding to RX_A or RX_B respectively + + // turn off all outputs + usrp()->_write_oe(d_which, 0, 0xffff); + + if (which == 0) + { + d_i2c_addr = 0x47; + } + else + { + d_i2c_addr = 0x45; + } + + // initialize gain + set_gain((gain_min() + gain_max()) / 2.0); + + // by default, assume we're using the USRPs clock as the ref clk, + // so setup the clock scheme and frequency. If the user wants + // to use the Bitshark's TCXO, the clock scheme should be set + // to 1, the freq should be set to 26000000, and a top-level + // 'make' and 'make install' needs to be executed. In addition, + // a U.FL to SMA cable needs to connect J6 on the Bitshark to + // the external clk input on the USRP + set_clock_scheme(0,64000000); + + bypass_adc_buffers(true); +} + +db_bitshark_rx::~db_bitshark_rx() +{ + shutdown(); +} + +/************ Private Functions **********************/ + +void +db_bitshark_rx::_set_pga(int pga_gain) +{ + assert(pga_gain>=0 && pga_gain<=20); + if(d_which == 0) + { + usrp()->set_pga (0, pga_gain); + usrp()->set_pga (1, pga_gain); + } + else + { + usrp()->set_pga (2, pga_gain); + usrp()->set_pga (3, pga_gain); + } +} + +/************ Public Functions **********************/ +void +db_bitshark_rx::shutdown() +{ + if (!d_is_shutdown) + { + d_is_shutdown = true; + } +} + +bool +db_bitshark_rx::set_bw (float bw) +{ + std::vector<int> args(NUM_BYTES_IN_I2C_CMD,0); + uint16_t rf_bw_in_khz = (uint16_t)(bw/1000.0); + char val[4]; + bool result = false; + uint8_t try_count = 0; + + memset(val,0x00,4); + if (rf_bw_in_khz < 660 || rf_bw_in_khz > 56000) + { + fprintf(stderr, "db_bitshark_rx::set_bw: bw (=%d) must be between 660 KHz and 56 MHz inclusive\n", rf_bw_in_khz); + return false; + } + //fprintf(stdout,"Setting bw: requested bw in khz is %d\r\n",rf_bw_in_khz); + memcpy(val,&rf_bw_in_khz,4); + args[0] = RF_CHAN_FILTER_BW_REG; + args[5] = val[0]; + args[6] = val[1]; + args[7] = val[2]; + args[8] = val[3]; + while ((result != true) && (try_count < 3)) + { + result=usrp()->write_i2c (d_i2c_addr, int_seq_to_str (args)); + try_count++; + } + + if (result == false) + { + fprintf(stderr, "db_bitshark_rx:set_bw: giving up after 3 tries without success\n"); + } + + return result; +} + +/* The gain referenced below is RF gain only. There are two independent + gain settings at RF: a digital step attenuator (providing 0, -6, -12, and + -18 dB of attenuation), and a second LNA (LNA2) that provides ~25 dB of + gain (roughly...it actually depends on the RF freq). So combining these + two stages can provide an overall gain range from 0 (which is mapped + to -18 dB on the step attenuator + LNA2 turned off) to 42 (which is + mapped to 0 dB on the step attenuator + LNA2 turned on). + + There could be better ways to map these, but this is sufficient for + now. */ +float +db_bitshark_rx::gain_min() +{ + return 0; +} + +float +db_bitshark_rx::gain_max() +{ + return 42; +} + +float +db_bitshark_rx::gain_db_per_step() +{ + return 6; +} + +bool +db_bitshark_rx::set_gain(float gain) +{ + // Set the gain. + // + // @param gain: RF gain in decibels, range of 0-42 + // @returns True/False + + std::vector<int> args(NUM_BYTES_IN_I2C_CMD,0); + uint8_t final_gain = (uint8_t)gain; + bool result = false; + uint8_t try_count = 0; + + if (gain < gain_min() || gain > gain_max()) + { + fprintf(stderr,"db_bitshark_rx::set_gain: gain (=%f) must be between %f and %f inclusive\n", gain,gain_min(),gain_max()); + return false; + } + //fprintf(stdout,"db_bitshark_rx::set_gain: requested gain of %f\r\n",gain); + args[0] = RF_GAIN_REG; + args[5] = (int)gain; + + while ((result != true) && (try_count < 3)) + { + result=usrp()->write_i2c (d_i2c_addr, int_seq_to_str (args)); + try_count++; + } + + if (result == false) + { + fprintf(stderr, "db_bitshark_rx:set_gain: giving up after 3 tries without success\n"); + } + + return result; +} + + +bool +db_bitshark_rx::set_clock_scheme(uint8_t clock_scheme, uint32_t ref_clk_freq) +{ + // Set the clock scheme for determining how the BURX + // dboard receives its clock. Note: Ideally, the constructor for the + // BURX board could simply call this method to set how it wants the + // clock scheme configured. However, depending on the application + // using the daughterboard, the constructor may run _after_ some + // other portion of the application needs the FPGA. And if the + // the clock source for the FPGA was the BURX's 26 MHz TCXO, we're in + // a chicken-before-the-egg dilemna. So the solution is to leave + // this function here for reference in case an app wants to use it, + // and also give the user the ability to set the clock scheme through + // the usrper cmd-line application (see example at the top of this + // file). + // + // @param clock_scheme + // @param ref_clk_freq in Hz + // @returns True/False + + std::vector<int> args(NUM_BYTES_IN_I2C_CMD,0); + bool result = false; + uint8_t try_count = 0; + char val[4]; + + if (clock_scheme > 1) + { + fprintf(stderr,"db_bitshark_rx::set_clock_scheme: invalid scheme %d\n",clock_scheme); + return false; + } + //fprintf(stdout,"db_bitshark_rx::set_clock_scheme: requested clock schem of %d with freq %d Hz \n",clock_scheme,ref_clk_freq); + memcpy(val,&ref_clk_freq,4); + args[0] = CLOCK_SCHEME_REG; + args[4] = (int)clock_scheme; + args[5] = val[0]; + args[6] = val[1]; + args[7] = val[2]; + args[8] = val[3]; + + while ((result != true) && (try_count < 3)) + { + result=usrp()->write_i2c (d_i2c_addr, int_seq_to_str (args)); + try_count++; + } + + if (result == false) + { + fprintf(stderr, "db_bitshark_rx:set_clock_scheme: giving up after 3 tries without success\n"); + } + return result; +} + +double +db_bitshark_rx::freq_min() +{ + return 300e6; +} + +double +db_bitshark_rx::freq_max() +{ + return 4e9; +} + +struct freq_result_t +db_bitshark_rx::set_freq(double freq) +{ + // Set the frequency. + // + // @param freq: target RF frequency in Hz + // @type freq: double + // + // @returns (ok, actual_baseband_freq) where: + // ok is True or False and indicates success or failure, + // actual_baseband_freq is RF frequency that corresponds to DC in the IF. + + std::vector<int> args(NUM_BYTES_IN_I2C_CMD,0); + std::vector<int> bytes(2); + char val[4]; + freq_result_t act_freq = {false, 0}; + uint32_t freq_in_khz = (uint32_t)(freq/1000.0); + bool result = false; + uint8_t try_count = 0; + + memset(val,0x00,4); + if(!(freq>=freq_min() && freq<=freq_max())) + { + return act_freq; + } + + //fprintf(stdout,"db_bitshark_rx::set_freq: requested freq is %d KHz\n",freq_in_khz); + memcpy(val,&freq_in_khz,4); + args[0] = RF_CENTER_FREQ_REG; + args[5] = val[0]; + args[6] = val[1]; + args[7] = val[2]; + args[8] = val[3]; + + while ((result != true) && (try_count < 3)) + { + result=usrp()->write_i2c (d_i2c_addr, int_seq_to_str (args)); + try_count++; + } + + if (result == false) + { + fprintf(stderr, "db_bitshark_rx:set_freq: giving up after 3 tries without success\n"); + } + + act_freq.ok = result; + act_freq.baseband_freq = (double)freq; + return act_freq; +} + +bool +db_bitshark_rx::is_quadrature() +{ + // Return True if this board requires both I & Q analog channels. + return true; +} + +bool +db_bitshark_rx::i_and_q_swapped() +{ + // Returns True since our I and Q channels are swapped + return true; +} diff --git a/usrp/host/lib/db_boards.cc b/usrp/host/lib/db_boards.cc index 590d8132d..9324d58ee 100644 --- a/usrp/host/lib/db_boards.cc +++ b/usrp/host/lib/db_boards.cc @@ -36,6 +36,7 @@ #include <usrp/db_xcvr2450.h> #include <usrp/db_dtt754.h> #include <usrp/db_dtt768.h> +#include <usrp/db_bitshark_rx.h> #include <cstdio> std::vector<db_base_sptr> @@ -209,6 +210,10 @@ instantiate_dbs(int dbid, usrp_basic_sptr usrp, int which_side) db.push_back(db_base_sptr(new db_dtt768(usrp, which_side))); break; + case(USRP_DBID_BITSHARK_RX): + db.push_back(db_base_sptr(new db_bitshark_rx(usrp, which_side))); + break; + case(-1): if (boost::dynamic_pointer_cast<usrp_basic_tx>(usrp)){ db.push_back(db_base_sptr(new db_basic_tx(usrp, which_side))); diff --git a/usrp/host/lib/usrp_dbid.dat b/usrp/host/lib/usrp_dbid.dat index 7d1e18714..5193a5fa0 100644 --- a/usrp/host/lib/usrp_dbid.dat +++ b/usrp/host/lib/usrp_dbid.dat @@ -84,5 +84,7 @@ "XCVR2450 Tx" 0x0060 "XCVR2450 Rx" 0x0061 +"Bitshark Rx" 0x0070 + "Experimental Tx" 0xfffe "Experimental Rx" 0xffff |