1 files changed, 0 insertions, 39 deletions
diff --git a/usrp2/fpga/simple_gemac/flow_ctrl_tx.v b/usrp2/fpga/simple_gemac/flow_ctrl_tx.v
deleted file mode 100644
index f80f5a76d..000000000
--- a/usrp2/fpga/simple_gemac/flow_ctrl_tx.v
+++ /dev/null
@@ -1,39 +0,0 @@
-
-// TX side of flow control -- when other side sends PAUSE, we wait
-
-module flow_ctrl_tx
-  (input        rst,
-   input        tx_clk,
-   //host processor
-   input        tx_pause_en,
-   // From MAC_rx_ctrl
-   input [15:0] pause_quanta,
-   input        pause_quanta_val,
-   // MAC_tx_ctrl
-   output       pause_apply,
-   input        paused);
-     
-   // ******************************************************************************        
-   // Inhibit our TX from transmitting because they sent us a PAUSE frame
-   // ******************************************************************************
-
-   // Pauses are in units of 512 bit times, or 64 bytes/clock cycles, and can be
-   //   as big as 16 bits, so 22 bits are needed for the counter
-   
-   reg [15+6:0] pause_quanta_counter;
-   reg 		pqval_d1, pqval_d2;		
-
-   always @(posedge tx_clk) pqval_d1 <= pause_quanta_val;
-   always @(posedge tx_clk) pqval_d2 <= pqval_d1;
-
-   always @ (posedge tx_clk or posedge rst)
-     if (rst)
-       pause_quanta_counter <= 0;
-     else if (pqval_d1 & ~pqval_d2)
-       pause_quanta_counter <= {pause_quanta, 6'b0}; 
-     else if((pause_quanta_counter!=0) & paused)
-       pause_quanta_counter <= pause_quanta_counter - 1;
-
-   assign	pause_apply = tx_pause_en & (pause_quanta_counter != 0);
-   
-endmodule // flow_ctrl