1 files changed, 0 insertions, 62 deletions
diff --git a/usrp2/fpga/sdr_lib/dummy_rx.v b/usrp2/fpga/sdr_lib/dummy_rx.v
deleted file mode 100644
index 99290ecec..000000000
--- a/usrp2/fpga/sdr_lib/dummy_rx.v
+++ /dev/null
@@ -1,62 +0,0 @@
-
-`define DSP_CORE_RX_BASE 160
-module dummy_rx
-  (input clk, input rst,
-   input set_stb, input [7:0] set_addr, input [31:0] set_data,
-
-   input [13:0] adc_a, input adc_ovf_a,
-   input [13:0] adc_b, input adc_ovf_b,
-   
-   output [31:0] sample,
-   input run,
-   output strobe
-   );
-
-   wire [15:0] scale_i, scale_q;
-   wire [31:0] phase_inc;
-   reg [31:0]  phase;
-
-   wire [23:0] i_decim, q_decim;
-   wire [7:0]  decim_rate;
-   
-   setting_reg #(.my_addr(`DSP_CORE_RX_BASE+0)) sr_0
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(phase_inc),.changed());
-   
-   setting_reg #(.my_addr(`DSP_CORE_RX_BASE+1)) sr_1
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out({scale_i,scale_q}),.changed());
-   
-   setting_reg #(.my_addr(`DSP_CORE_RX_BASE+2)) sr_2
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(decim_rate),.changed());
-   
-   strobe_gen strobe_gen(.clock(clk),.reset(rst),.enable(run),.rate(decim_rate),
-			 .strobe_in(1),.strobe(strobe) );
-
-   reg [15:0] i_out, q_out;
-   assign      sample = {i_out,q_out};
-
-   always @(posedge clk)
-     if(rst)
-       i_out <= 0;
-     else if(~run)
-       i_out <= 0;
-     else if(strobe)
-       i_out <= i_out + 1;
-
-   reg 	       run_d1;
-   always @(posedge clk)
-     if(rst)
-       run_d1 <= 0;
-     else
-       run_d1 <= run;
-
-   always @(posedge clk)
-     if(rst)
-       q_out <= 0;
-     else if (run & ~run_d1)
-       q_out <= q_out + 1;
-       
-   
-endmodule // dsp_core_rx