diff options
Diffstat (limited to 'usrp2/fpga/control_lib/longfifo.v')
-rw-r--r-- | usrp2/fpga/control_lib/longfifo.v | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/usrp2/fpga/control_lib/longfifo.v b/usrp2/fpga/control_lib/longfifo.v new file mode 100644 index 000000000..c73cc76f8 --- /dev/null +++ b/usrp2/fpga/control_lib/longfifo.v @@ -0,0 +1,122 @@ + +// FIFO intended to be interchangeable with shortfifo, but +// based on block ram instead of SRL16's +// only one clock domain + +// Port A is write port, Port B is read port + +module longfifo + #(parameter WIDTH=32, SIZE=9) + (input clk, input rst, + input [WIDTH-1:0] datain, + output [WIDTH-1:0] dataout, + input read, + input write, + input clear, + output full, + output empty, + output [15:0] space, + output [15:0] occupied); + + // Read side states + localparam EMPTY = 0; + localparam PRE_READ = 1; + localparam READING = 2; + + reg [SIZE-1:0] wr_addr, rd_addr; + reg [1:0] read_state; + + wire [SIZE-1:0] fullness = wr_addr - rd_addr; // Approximate, for simulation only + assign occupied = {{16-SIZE{1'b0}},fullness}; + + wire [SIZE-1:0] free_space = rd_addr - wr_addr - 2; // Approximate, for SERDES flow control + assign space = {{16-SIZE{1'b0}},free_space}; + + reg empty_reg, full_reg; + always @(posedge clk) + if(rst) + wr_addr <= 0; + else if(clear) + wr_addr <= 0; + else if(write) + wr_addr <= wr_addr + 1; + + ram_2port #(.DWIDTH(WIDTH),.AWIDTH(SIZE)) + ram (.clka(clk), + .ena(1), + .wea(write), + .addra(wr_addr), + .dia(datain), + .doa(), + + .clkb(clk), + .enb((read_state==PRE_READ)|read), + .web(0), + .addrb(rd_addr), + .dib(0), + .dob(dataout)); + + always @(posedge clk) + if(rst) + begin + read_state <= EMPTY; + rd_addr <= 0; + empty_reg <= 1; + end + else + if(clear) + begin + read_state <= EMPTY; + rd_addr <= 0; + empty_reg <= 1; + end + else + case(read_state) + EMPTY : + if(write) + begin + //rd_addr <= wr_addr; + read_state <= PRE_READ; + end + PRE_READ : + begin + read_state <= READING; + empty_reg <= 0; + rd_addr <= rd_addr + 1; + end + + READING : + if(read) + if(rd_addr == wr_addr) + begin + empty_reg <= 1; + if(write) + read_state <= PRE_READ; + else + read_state <= EMPTY; + end + else + rd_addr <= rd_addr + 1; + endcase // case(read_state) + + wire [SIZE-1:0] dont_write_past_me = rd_addr - 3; + wire becoming_full = wr_addr == dont_write_past_me; + + always @(posedge clk) + if(rst) + full_reg <= 0; + else if(clear) + full_reg <= 0; + else if(read & ~write) + full_reg <= 0; + //else if(write & ~read & (wr_addr == (rd_addr-3))) + else if(write & ~read & becoming_full) + full_reg <= 1; + + //assign empty = (read_state != READING); + assign empty = empty_reg; + + // assign full = ((rd_addr - 1) == wr_addr); + assign full = full_reg; + +endmodule // longfifo |