1 files changed, 17 insertions, 8 deletions

diff --git a/usrp2/firmware/lib/eth_mac.c b/usrp2/firmware/lib/eth_mac.c
index 5fadaf40b..41690af95 100644
--- a/usrp2/firmware/lib/eth_mac.c
+++ b/usrp2/firmware/lib/eth_mac.c
@@ -21,7 +21,7 @@
 #include "bool.h"
 #include "eth_phy.h"	// for simulation constants
 #include "mdelay.h"
-
+#include "stdio.h"
 
 #define PHY_ADDR 1
 
@@ -29,7 +29,11 @@ void
 eth_mac_set_addr(const u2_mac_addr_t *src)
 {
   int i;
-
+  eth_mac->ucast_hi = ((unsigned int)src->addr[0])<<8 + ((unsigned int)src->addr[1]);
+  eth_mac->ucast_lo = ((unsigned int)src->addr[2])<<24 + ((unsigned int)src->addr[3])<<16 +
+    ((unsigned int)src->addr[4])<<8 +((unsigned int)src->addr[5]);
+  
+  /*
   // tell mac our source address and enable automatic insertion on Tx.
   eth_mac->mac_tx_add_prom_wr = 0;	// just in case
   for (i = 0; i < 6; i++){
@@ -53,6 +57,8 @@ eth_mac_set_addr(const u2_mac_addr_t *src)
     mdelay(1);
   }
   // eth_mac->mac_rx_add_chk_en = 1;  // FIXME enable when everything's working
+
+  */
 }
 
 
@@ -62,14 +68,14 @@ eth_mac_init(const u2_mac_addr_t *src)
   eth_mac->miimoder = 25;	// divider from CPU clock (50MHz/25 = 2MHz)
 
   eth_mac_set_addr(src);
-
+  eth_mac->settings = 0x39; 
   // set rx flow control high and low water marks
   // unsigned int lwmark = (2*2048 + 64)/4; // 2 * 2048-byte frames + 1 * 64-byte pause frame
   // eth_mac->fc_hwmark = lwmark + 2048/4;  // plus a 2048-byte frame
 
-  eth_mac->fc_lwmark = 600;		// there are currently 2047 lines in the fifo
-  eth_mac->fc_hwmark = 1200;
-  eth_mac->fc_padtime = 1700;           // how long before flow control runs out do we 
+  //  eth_mac->fc_lwmark = 600;		// there are currently 2047 lines in the fifo
+  // eth_mac->fc_hwmark = 1200;
+  //eth_mac->fc_padtime = 1700;           // how long before flow control runs out do we 
                                         // request a re-pause.  Units of 8ns (bytes)
 
   //eth_mac->tx_pause_en = 0;		// pay attn to pause frames sent to us
@@ -80,8 +86,8 @@ eth_mac_init(const u2_mac_addr_t *src)
 int
 eth_mac_read_rmon(int addr)
 {
-  int t;
-  
+  int t = 0;
+  /*  
   eth_mac->rmon_rd_addr = addr;
   eth_mac->rmon_rd_apply = 1;
   while(eth_mac->rmon_rd_grant == 0)
@@ -89,6 +95,7 @@ eth_mac_read_rmon(int addr)
 
   t = eth_mac->rmon_rd_dout;
   eth_mac->rmon_rd_apply = 0;
+  */
   return t;
 }
 
@@ -111,6 +118,7 @@ eth_mac_miim_read(int addr)
   while((eth_mac->miistatus & MIIS_BUSY) != 0)
     ;
 
+  printf("MIIM-READ ADDR %d DATA %d\n",addr, eth_mac->miirx_data);
   return eth_mac->miirx_data;
 }
 
@@ -122,6 +130,7 @@ eth_mac_miim_write(int addr, int value)
   eth_mac->miitx_data = value;
   eth_mac->miicommand = MIIC_WCTRLDATA;
 
+  printf("MIIM-WRITE ADDR %d VAL %d\n",addr,value);
   while((eth_mac->miistatus & MIIS_BUSY) != 0)
     ;
 }