diff options
Diffstat (limited to 'usrp2/firmware/apps/test_serdes.c')
| -rw-r--r-- | usrp2/firmware/apps/test_serdes.c | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/usrp2/firmware/apps/test_serdes.c b/usrp2/firmware/apps/test_serdes.c new file mode 100644 index 000000000..fadf4d86c --- /dev/null +++ b/usrp2/firmware/apps/test_serdes.c @@ -0,0 +1,192 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include "bool.h" +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> + + +// ---------------------------------------------------------------- + +static u2_mac_addr_t dst_mac_addr = + {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; + +// ---------------------------------------------------------------- + +// #define PACKET_SIZE 1500 // bytes +// #define ETH_DATA_RATE 1000000 // 1MB/s +// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex16_nl(speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +void +buffer_irq_handler(unsigned irq) +{ + // FIXME +} + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + int i; + + u2_eth_packet_t pkt __attribute__((aligned (4))); + + pkt.ehdr.dst = dst_mac_addr; + // pkt.ehdr.src filled in by mac + pkt.ehdr.ethertype = U2_ETHERTYPE; + + // fill ALL buffers for debugging + for (i = 0; i < 8; i++) + init_packet((void *)buffer_ram(i), &pkt, i); +} + +static int led_counter = 0; + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ngen_eth_packets\n"); + + // Control LEDs + output_regs->leds = 0x00; + + init_packets(); + + // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now + pic_register_handler(IRQ_TIMER, timer_irq_handler); + hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + // eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 + int i = 0; + while(1){ + if (link_is_up && send_packet_now){ + send_packet_now = false; + + // kick off the next packet + // FIXME set packet number in packet + + bp_send_from_buf(i, PORT_SERDES, 1, 0, 255); // 1KB total + + //while ((buffer_pool_status->status & (BPS_DONE_0|BPS_ERROR_0)) == 0) + while ((buffer_pool_status->status ) == 0) + ; + bp_clear_buf(i); + i++; + if(i==8) + i=0; + output_regs->leds = ((++led_counter) & 0x1) | (link_is_up ? 0x2 : 0x0); + } + } + + hal_finish(); + return 1; +} |