1 files changed, 113 insertions, 0 deletions
diff --git a/usrp2/firmware/apps/test_phy_comm.c b/usrp2/firmware/apps/test_phy_comm.c
new file mode 100644
index 000000000..7242c6fc8
--- /dev/null
+++ b/usrp2/firmware/apps/test_phy_comm.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2007 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// check communication with ethernet PHY chip
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "hal_io.h"
+#include "ethernet.h"
+#include "pic.h"
+#include "nonstdio.h"
+
+
+#define DELTA_T     12500000  		// .125s (10ns per tick)
+//#define DELTA_T      10000
+
+// debugging output on tx pins
+#define LS_MASK  0xE0000
+#define LS_1000  0x80000
+#define LS_100   0x40000
+#define LS_10    0x20000
+
+
+
+#define U2_ETHERTYPE 0xBEEF
+
+
+static volatile int led_link_up_flag = 0;
+
+/*
+ * Called when eth phy state changes (w/ interrupts disabled)
+ */
+void
+link_changed_callback(int speed)
+{
+  int v = 0;
+  switch(speed){
+  case 10:
+    v = LS_10;
+    led_link_up_flag = 0x2;
+    break;
+    
+  case 100:
+    v = LS_100;
+    led_link_up_flag = 0x2;
+    break;
+    
+  case 1000:
+    v = LS_100;
+    led_link_up_flag = 0x2;
+    break;
+
+  default:
+    v = 0;
+    led_link_up_flag = 0;
+    break;
+  }
+
+  //hal_gpio_set_tx(v, LS_MASK);	/* set debug bits on d'board */
+
+  putstr("\neth link changed: speed = ");
+  puthex_nl(speed);
+}
+
+void
+timer_handler(unsigned irq)
+{
+  static int led_counter = 0;
+
+  hal_set_timeout(DELTA_T);	// schedule next timeout
+  output_regs->leds = (led_counter++ & 0x1) | led_link_up_flag;
+}
+
+int
+main(void)
+{
+  u2_init();
+
+  putstr("\n test_phy_comm\n");
+
+  pic_register_handler(IRQ_TIMER, timer_handler);
+  hal_set_timeout(DELTA_T);	// schedule timeout
+
+  // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output
+  //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111");
+  //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111");
+
+  ethernet_register_link_changed_callback(link_changed_callback);
+
+  output_regs->phy_ctrl = 1;	/* reset the eth PHY */
+  output_regs->phy_ctrl = 0;
+
+  ethernet_init();
+
+  while(1)
+    ;
+
+  return 0;
+}