diff options
Diffstat (limited to 'usrp/host/lib/legacy')
| -rw-r--r-- | usrp/host/lib/legacy/usrp_basic.h | 6 | ||||
| -rw-r--r-- | usrp/host/lib/legacy/usrp_standard.h | 15 |
2 files changed, 17 insertions, 4 deletions
diff --git a/usrp/host/lib/legacy/usrp_basic.h b/usrp/host/lib/legacy/usrp_basic.h index f77b9adc9..86c48635a 100644 --- a/usrp/host/lib/legacy/usrp_basic.h +++ b/usrp/host/lib/legacy/usrp_basic.h @@ -237,14 +237,14 @@ public: /*! * \brief Set ADC offset correction - * \param which which ADC[0,3]: 0 = RX_A I, 1 = RX_A Q... + * \param which_adc which ADC[0,3]: 0 = RX_A I, 1 = RX_A Q... * \param offset 16-bit value to subtract from raw ADC input. */ bool set_adc_offset (int which_adc, int offset); /*! * \brief Set DAC offset correction - * \param which which DAC[0,3]: 0 = TX_A I, 1 = TX_A Q... + * \param which_dac which DAC[0,3]: 0 = TX_A I, 1 = TX_A Q... * \param offset 10-bit offset value (ambiguous format: See AD9862 datasheet). * \param offset_pin 1-bit value. If 0 offset applied to -ve differential pin; * If 1 offset applied to +ve differential pin. @@ -782,6 +782,8 @@ protected: * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512. * Use zero for a reasonable default. * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default. + * \param fpga_filename name of the rbf file to load + * \param firmware_filename name of ihx file to load */ usrp_basic_rx (int which_board, int fusb_block_size=0, diff --git a/usrp/host/lib/legacy/usrp_standard.h b/usrp/host/lib/legacy/usrp_standard.h index 6dee62f30..734fff4b5 100644 --- a/usrp/host/lib/legacy/usrp_standard.h +++ b/usrp/host/lib/legacy/usrp_standard.h @@ -127,9 +127,15 @@ class usrp_standard_rx : public usrp_basic_rx, public usrp_standard_common * \brief invokes constructor, returns shared_ptr or shared_ptr equivalent of 0 if trouble * * \param which_board Which USRP board on usb (not particularly useful; use 0) + * \param decim_rate decimation factor + * \param nchan number of channels + * \param mux Rx mux setting, \sa set_mux + * \param mode mode * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512. * Use zero for a reasonable default. * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default. + * \param fpga_filename Name of rbf file to load + * \param firmware_filename Name of ihx file to load */ static usrp_standard_rx_sptr make(int which_board, unsigned int decim_rate, @@ -255,7 +261,7 @@ class usrp_standard_rx : public usrp_basic_rx, public usrp_standard_common * \param chan which DDC channel we're controlling (almost always 0). * \param db the daughterboard we're controlling. * \param target_freq the RF frequency we want at DC in the complex baseband. - * \param[out] tune_result details how the hardware was configured. + * \param[out] result details how the hardware was configured. * * \returns true iff everything was successful. */ @@ -329,9 +335,14 @@ class usrp_standard_tx : public usrp_basic_tx, public usrp_standard_common * \brief invokes constructor, returns shared_ptr or shared_ptr equivalent of 0 if trouble * * \param which_board Which USRP board on usb (not particularly useful; use 0) + * \param interp_rate interpolation factor + * \param nchan number of channels + * \param mux Tx mux setting, \sa set_mux * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512. * Use zero for a reasonable default. * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default. + * \param fpga_filename Name of rbf file to load + * \param firmware_filename Name of ihx file to load */ static usrp_standard_tx_sptr make(int which_board, unsigned int interp_rate, @@ -426,7 +437,7 @@ class usrp_standard_tx : public usrp_basic_tx, public usrp_standard_common * \param chan which DUC channel we're controlling (usually == which_side). * \param db the daughterboard we're controlling. * \param target_freq the RF frequency we want our baseband translated to. - * \param[out] tune_result details how the hardware was configured. + * \param[out] result details how the hardware was configured. * * \returns true iff everything was successful. */ |