diff options
Diffstat (limited to 'usrp/fpga/toplevel/sizetest/sizetest.psf')
-rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.psf | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/usrp/fpga/toplevel/sizetest/sizetest.psf b/usrp/fpga/toplevel/sizetest/sizetest.psf new file mode 100644 index 000000000..e4fc6aa27 --- /dev/null +++ b/usrp/fpga/toplevel/sizetest/sizetest.psf @@ -0,0 +1,228 @@ +DEFAULT_DESIGN_ASSISTANT_SETTINGS +{ + HCPY_ALOAD_SIGNALS = OFF; + HCPY_VREF_PINS = OFF; + HCPY_CAT = OFF; + HCPY_ILLEGAL_HC_DEV_PKG = OFF; + ACLK_RULE_IMSZER_ADOMAIN = OFF; + ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; + ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; + ACLK_CAT = OFF; + SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; + SIGNALRACE_CAT = OFF; + NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; + NONSYNCHSTRUCT_RULE_SRLATCH = OFF; + NONSYNCHSTRUCT_RULE_DLATCH = OFF; + NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; + NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; + NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; + NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; + NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; + NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; + NONSYNCHSTRUCT_CAT = OFF; + NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; + TIMING_RULE_COIN_CLKEDGE = OFF; + TIMING_RULE_SHIFT_REG = OFF; + TIMING_RULE_HIGH_FANOUTS = OFF; + TIMING_CAT = OFF; + RESET_RULE_ALL = OFF; + RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_REG_ASNYCH = OFF; + RESET_RULE_COMB_ASYNCH_RESET = OFF; + RESET_RULE_IMSYNCH_EXRESET = OFF; + RESET_RULE_UNSYNCH_EXRESET = OFF; + RESET_RULE_INPINS_RESETNET = OFF; + RESET_CAT = OFF; + CLK_RULE_ALL = OFF; + CLK_RULE_MIX_EDGES = OFF; + CLK_RULE_CLKNET_CLKSPINES = OFF; + CLK_RULE_INPINS_CLKNET = OFF; + CLK_RULE_GATING_SCHEME = OFF; + CLK_RULE_INV_CLOCK = OFF; + CLK_RULE_COMB_CLOCK = OFF; + CLK_CAT = OFF; + HCPY_EXCEED_USER_IO_USAGE = OFF; + HCPY_EXCEED_RAM_USAGE = OFF; + NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; + SIGNALRACE_RULE_TRISTATE = OFF; + ASSG_RULE_MISSING_TIMING = OFF; + ASSG_RULE_MISSING_FMAX = OFF; + ASSG_CAT = OFF; +} +SYNTHESIS_FITTING_SETTINGS +{ + AUTO_SHIFT_REGISTER_RECOGNITION = ON; + AUTO_RAM_RECOGNITION = ON; + REMOVE_DUPLICATE_LOGIC = ON; + AUTO_MERGE_PLLS = ON; + AUTO_OPEN_DRAIN_PINS = ON; + AUTO_CARRY_CHAINS = ON; + AUTO_DELAY_CHAINS = ON; + STRATIX_CARRY_CHAIN_LENGTH = 70; + AUTO_PACKED_REG_CYCLONE = "MINIMIZE AREA WITH CHAINS"; + CYCLONE_OPTIMIZATION_TECHNIQUE = SPEED; + AUTO_GLOBAL_MEMORY_CONTROLS = OFF; + AUTO_GLOBAL_REGISTER_CONTROLS = ON; + AUTO_GLOBAL_CLOCK = ON; + LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; + ENABLE_BUS_HOLD_CIRCUITRY = OFF; + WEAK_PULL_UP_RESISTOR = OFF; + IGNORE_SOFT_BUFFERS = ON; + IGNORE_LCELL_BUFFERS = OFF; + IGNORE_ROW_GLOBAL_BUFFERS = OFF; + IGNORE_GLOBAL_BUFFERS = OFF; + IGNORE_CASCADE_BUFFERS = OFF; + IGNORE_CARRY_BUFFERS = OFF; + REMOVE_DUPLICATE_REGISTERS = ON; + REMOVE_REDUNDANT_LOGIC_CELLS = OFF; + ALLOW_POWER_UP_DONT_CARE = ON; + PCI_IO = OFF; + NOT_GATE_PUSH_BACK = ON; + SLOW_SLEW_RATE = OFF; + STATE_MACHINE_PROCESSING = AUTO; +} +DEFAULT_HARDCOPY_SETTINGS +{ + HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; +} +DEFAULT_TIMING_REQUIREMENTS +{ + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + RUN_ALL_TIMING_ANALYSES = ON; + IGNORE_CLOCK_SETTINGS = OFF; + DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; + CUT_OFF_IO_PIN_FEEDBACK = ON; + CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; + CUT_OFF_READ_DURING_WRITE_PATHS = ON; + CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; + DO_MIN_ANALYSIS = ON; + DO_MIN_TIMING = OFF; + NUMBER_OF_PATHS_TO_REPORT = 200; + NUMBER_OF_DESTINATION_TO_REPORT = 10; + NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; + MAX_SCC_SIZE = 50; +} +HDL_SETTINGS +{ + VERILOG_INPUT_VERSION = VERILOG_2001; + ENABLE_IP_DEBUG = OFF; + VHDL_INPUT_VERSION = VHDL93; + VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; +} +PROJECT_INFO(sizetest) +{ + USER_LIBRARIES = "e:\fpga\megacells\"; + ORIGINAL_QUARTUS_VERSION = 3.0; + PROJECT_CREATION_TIME_DATE = "22:00:25 SEPTEMBER 28, 2003"; + LAST_QUARTUS_VERSION = 3.0; + SHOW_REGISTRATION_MESSAGE = ON; +} +THIRD_PARTY_EDA_TOOLS(sizetest) +{ + EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; + EDA_SIMULATION_TOOL = "<NONE>"; + EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; + EDA_BOARD_DESIGN_TOOL = "<NONE>"; + EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; + EDA_RESYNTHESIS_TOOL = "<NONE>"; +} +EDA_TOOL_SETTINGS(eda_design_synthesis) +{ + EDA_INPUT_GND_NAME = GND; + EDA_INPUT_VCC_NAME = VCC; + EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_INPUT_DATA_FORMAT = EDIF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_simulation) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_timing_analysis) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + EDA_LAUNCH_CMD_LINE_TOOL = OFF; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_board_design) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_formal_verification) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_palace) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + RESYNTHESIS_RETIMING = FULL; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; +} |