diff options
Diffstat (limited to 'usrp/fpga/toplevel/sizetest/sizetest.csf')
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.csf | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/usrp/fpga/toplevel/sizetest/sizetest.csf b/usrp/fpga/toplevel/sizetest/sizetest.csf new file mode 100644 index 000000000..4b724e7f5 --- /dev/null +++ b/usrp/fpga/toplevel/sizetest/sizetest.csf @@ -0,0 +1,160 @@ +COMPILER_SETTINGS +{ + IO_PLACEMENT_OPTIMIZATION = OFF; + ENABLE_DRC_SETTINGS = OFF; + PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF; + PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF; + PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF; + DRC_FANOUT_EXCEEDING = 30; + DRC_REPORT_FANOUT_EXCEEDING = OFF; + DRC_TOP_FANOUT = 50; + DRC_REPORT_TOP_FANOUT = OFF; + RUN_DRC_DURING_COMPILATION = OFF; + ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON; + ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF; + ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF; + ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF; + SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF; + MERGE_HEX_FILE = OFF; + TRUE_WYSIWYG_FLOW = OFF; + SEED = 1; + FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY; + FAMILY = Cyclone; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB"; + DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4"; + DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS"; + DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS"; + DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS"; + STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2"; + STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1"; + FAST_FIT_COMPILATION = OFF; + SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF; + OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = OFF; + OPTIMIZE_TIMING = OFF; + OPTIMIZE_HOLD_TIMING = OFF; + COMPILATION_LEVEL = FULL; + SAVE_DISK_SPACE = ON; + SPEED_DISK_USAGE_TRADEOFF = NORMAL; + LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF; + SIGNALPROBE_ALLOW_OVERUSE = OFF; + FOCUS_ENTITY_NAME = |sizetest; + FIT_ONLY_ONE_ATTEMPT = OFF; +} +DEFAULT_DEVICE_OPTIONS +{ + GENERATE_CONFIG_HEXOUT_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_JBC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_SVF_FILE = OFF; + RESERVE_PIN = "AS INPUT TRI-STATED"; + RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND"; + HEXOUT_FILE_COUNT_DIRECTION = UP; + HEXOUT_FILE_START_ADDRESS = 0; + GENERATE_HEX_FILE = OFF; + GENERATE_RBF_FILE = OFF; + GENERATE_TTF_FILE = OFF; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + APEX20K_CONFIGURATION_DEVICE = AUTO; + USE_CONFIGURATION_DEVICE = ON; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + AUTO_RESTART_CONFIGURATION = OFF; + ENABLE_VREFB_PIN = OFF; + ENABLE_VREFA_PIN = OFF; + SECURITY_BIT = OFF; + USER_START_UP_CLOCK = OFF; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_UPDATE_MODE = STANDARD; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + ENABLE_JTAG_BST_SUPPORT = OFF; + CONFIGURATION_CLOCK_DIVISOR = 1; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CLOCK_SOURCE = INTERNAL; + COMPRESSION_MODE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; +} +AUTO_SLD_HUB_ENTITY +{ + AUTO_INSERT_SLD_HUB_ENTITY = ENABLE; + HUB_INSTANCE_NAME = SLD_HUB_INST; + HUB_ENTITY_NAME = SLD_HUB; +} +CHIP(sizetest) +{ + DEVICE = EP1C12Q240C8; + DEVICE_FILTER_PACKAGE = "ANY QFP"; + DEVICE_FILTER_PIN_COUNT = 240; + DEVICE_FILTER_SPEED_GRADE = ANY; +} +SIGNALTAP_LOGIC_ANALYZER_SETTINGS +{ + ENABLE_SIGNALTAP = Off; + AUTO_ENABLE_SMART_COMPILE = On; +} |