1 files changed, 0 insertions, 73 deletions
diff --git a/usrp/fpga/sdr_lib/master_control_multi.v b/usrp/fpga/sdr_lib/master_control_multi.v
deleted file mode 100644
index cab96a79f..000000000
--- a/usrp/fpga/sdr_lib/master_control_multi.v
+++ /dev/null
@@ -1,73 +0,0 @@
-// -*- verilog -*-
-//
-//  USRP - Universal Software Radio Peripheral
-//
-//  Copyright (C) 2006 Martin Dudok van Heel
-//
-//  This program is free software; you can redistribute it and/or modify
-//  it under the terms of the GNU General Public License as published by
-//  the Free Software Foundation; either version 2 of the License, or
-//  (at your option) any later version.
-//
-//  This program is distributed in the hope that it will be useful,
-//  but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  GNU General Public License for more details.
-//
-//  You should have received a copy of the GNU General Public License
-//  along with this program; if not, write to the Free Software
-//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
-//
-`include "config.vh"
-`include "../../../firmware/include/fpga_regs_common.v"
-`include "../../../firmware/include/fpga_regs_standard.v"
-// Clock, enable, and reset controls for whole system
-// Modified version to enable multi_usrp synchronisation
-
-module master_control_multi
-  ( input master_clk, input usbclk,
-    input wire [6:0] serial_addr, input wire [31:0] serial_data, input wire serial_strobe,
-    input wire rx_slave_sync,
-    output tx_bus_reset, output rx_bus_reset,
-    output wire tx_dsp_reset, output wire rx_dsp_reset,
-    output wire enable_tx, output wire enable_rx,
-    output wire sync_rx,
-    output wire [7:0] interp_rate, output wire [7:0] decim_rate,
-    output tx_sample_strobe, output strobe_interp,
-    output rx_sample_strobe, output strobe_decim,
-    input tx_empty,
-    input wire [15:0] debug_0,input wire [15:0] debug_1,input wire [15:0] debug_2,input wire [15:0] debug_3,
-    output wire [15:0] reg_0, output wire [15:0] reg_1, output wire [15:0] reg_2, output wire [15:0] reg_3
-    );
-   
-   wire [15:0] reg_1_std;
-
-   master_control master_control_standard
-     ( .master_clk(master_clk),.usbclk(usbclk),
-       .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
-       .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
-       .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
-       .enable_tx(enable_tx),.enable_rx(enable_rx),
-       .interp_rate(interp_rate),.decim_rate(decim_rate),
-       .tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp),
-       .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
-       .tx_empty(tx_empty),
-       .debug_0(debug_0),.debug_1(debug_1),
-       .debug_2(debug_2),.debug_3(debug_3),
-       .reg_0(reg_0),.reg_1(reg_1_std),.reg_2(reg_2),.reg_3(reg_3) );
-
-   // FIXME need a separate reset for all control settings 
-   // Master/slave Controls assignments
-   wire [7:0] rx_master_slave_controls;
-   setting_reg_masked #(`FR_RX_MASTER_SLAVE) sr_rx_mstr_slv_ctrl(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(rx_master_slave_controls));
- 
-   assign     sync_rx = rx_master_slave_controls[`bitnoFR_RX_SYNC] | (rx_master_slave_controls[`bitnoFR_RX_SYNC_SLAVE] & rx_slave_sync);
-  //sync if we are told by master_control or if we get a hardware slave sync
-  //TODO There can be a one sample difference between master and slave sync. 
-  //     Maybe use a register for sync_rx which uses the (neg or pos) edge of master_clock and/or rx_slave_sync to trigger
-  //     Or even use a seperate sync_rx_out and sync_rx_internal (which lags behind)
-  //TODO make output pin not hardwired
-assign reg_1 ={(rx_master_slave_controls[`bitnoFR_RX_SYNC_MASTER])? sync_rx:reg_1_std[15],reg_1_std[14:0]};
-
-   
-endmodule // master_control